Luminescence phenomena of carbon dots derived from citric acid and urea - a molecular insight

A switchable green emitting dye and its phenomenal properties: implications for the photoluminescence features of carbon dots

New molecular fluorophores are constantly being discovered in post-synthetic mixtures of carbon dots (CDs), prompting researchers to elucidate their role in the optical properties of these nanomaterials. It has been reported that the green-emitting fluorophore that forms during the synthesis of popular citric acid/urea CDs is HPPT (4-hydroxy-1H-pyrrolo[3,4-c]pyridine-1,3,6(2H,5H)-trione). However, due to the low concentration of HPPT-like molecules within the structure of CDs, their actual binding and contribution to the optical properties of CDs has not so far been convincingly confirmed. In this joint experimental and quantum chemical study, we show that HPPT is a strong acid and only its anionic form, HPPT-, present in solutions of pH 0-10, is emissive. Next, its fluorescence can be switched off rapidly in strongly alkaline environments as a result of HPPT- hydrolysis, leading to the opening of its pyrrole ring and formation of CDPC (3-carbamoyl-2,6-dihydroxypyridine-4-carboxylic acid), existing as the CDPC2- dianion under these conditions. Eventually, we found that the ring opening hydrolysis is reversible and the green emission may be restored in acidic environments. The kinetics and mechanism of this hydrolysis were also revealed. The optical features of citric acid (CA)-urea CDs under various conditions were compared with a simpler CD system prepared by treating the CDs obtained from CA solely with HPPT- (HPPT@CDs). Our results indicate the feasibility of the post-synthetic modification of HPPT- present in the structures of CA-urea CDs and HPPT@CDs. Without HPPT- they emit blue fluorescence only. Thus, this makes the nanosystem switch the PL emission colour reversibly from green to blue owing to the opening and closing of the pyrrole ring in HPPT-like molecules. More importantly, the latter process may be considered a first step toward genuine fine tuning of the PL emission colour from CDs. These findings are of general importance to the further development of citric acid-based CDs with tailored properties.

Exploring Carbon Dots: Green Nanomaterials for Unconventional Lasing

In recent years, the progress toward lighting miniaturization is focused on luminescent nanomaterials. Among them, fluorescent carbon dots (CDs) are receiving increasing attention thanks to their astonishing optical properties complemented by their intrinsic biocompatibility and low toxicity. The CDs can be easily dispersed in water, organic solvents or incorporated in polymeric matrices, preserving their emission properties. However, the relationship between their structural and optical properties is still not fully elucidated, motivating a consistent research effort for the comprehension of their features. Nevertheless, CDs demonstrate to be efficient gain materials for lasing, thanks to their high quantum yield (QY), emission tunability in the visible and near infrared (NIR) range, short lifetimes, and high absorption cross section, even if the synthetic reproducibility, the low reaction yield and the spectral width of the emission may limit their effective exploitation. This review summarizes the latest advancements in the investigation of the characteristic properties of CDs that make laser action possible, illustrating optical geometries for lasing and random lasing, both in solution and solid state, and the few currently demonstrated breakthroughs. While the journey toward their effective application is still long, the potential of CD-based laser sources is promising in various technological fields and futuristic perspectives will be discussed.

Fabrication of nitrogen-doped carbon dots biomass composite hydrogel for adsorption of Cu (II) in wastewater or soil and DFT simulation for adsorption mechanism

With the increase of Cu (II) content, its bioaccumulation becomes a potential pollution to the environment. It is necessary to design an economical and efficient material to remove Cu (II) without causing other environmental hazards. A novel material of alginate composite bead (ALG@NCDs) was synthesized by embedding N-doped carbon dots into pure alginate bead for the adsorption of Cu (II) from wastewater and contaminated soil. The initial concentration, the amount of adsorbent, temperature, adsorption time, and pH value were optimized for the adsorption of Cu (II). According to the Langmuir isothermal adsorption model, the maximum adsorption amount of the material to Cu (II) was 152.44 mg/g. The results of selective adsorption showed that ALG@NCDs had higher affinity to Cu (II) than to Pb (II), Co (II), Ni (II), and Zn (II). After five adsorption-desorption experiment, adsorption capacity of the ALG@NCDs was kept 89% of the initial adsorption capacity. Its Cu (II) adsorption mechanism was studied by density functional theory calculations. In addition, the material could effectively adsorb Cu (II) and release the phytonutrient Ca (II) simultaneously when applied to actual wastewater and soil. The fabricated ALG@NCDs would be a promising material for the adsorption of Cu (II) from wastewater or soil.

Luminescent carbon dots versus quantum dots and gold nanoclusters as sensors

Ultra-small nanoparticles, including quantum dots, gold nanoclusters (AuNCs) and carbon dots (CDs), have emerged as a promising class of fluorescent material because of their molecular-like properties and widespread applications in sensing and imaging. However, the fluorescence properties of ultra-small gold nanoparticles (i.e., AuNCs) and CDs are more complicated and well distinguished from conventional quantum dots or organic dye molecules. At this frontier, we highlight recent developments in the fundamental understanding of the fluorescence emission mechanism of these ultra-small nanoparticles. Moreover, this review carefully analyses the underlying principles of ultra-small nanoparticle sensors. We expect that this information on ultra-small nanoparticles will fuel research aimed at achieving precise control over their fluorescence properties and the broadening of their applications.

A Theoretical Investigation into the Oligomer Structure of Carbon Dots Formed from Small-Molecule Precursors

In-depth insights into the oligomers of carbon dots (CDs) prepared from small-molecule precursors are important in the study of the carbonization mechanism of CDs and for our knowledge of their complex structure. Herein, citric acid (CA) and ethylenediamine (EDA) were used as small-molecule precursors to prepare CDs in an aqueous solution. The structure of oligomers acquired from CA and EDA in different molar ratios and their formation process were first studied using density functional theory, including the dispersion correction (DFT-D3) method. The results showed that the energy barrier of dimer cyclization was higher than that of its linear polymerization, but the free energy of the cyclized product was much lower than that of its reactant, and IPCA (5-oxo-1,-2,3,5-tetrahydroimidazo [1,2-a]pyridine-7-carboxylic acid) could therefore be obtained under certain conditions. The oligomers obtained from different molar ratios of EDA and CA were molecular clusters formed by short polyamide chains through intermolecular forces; with the exception of when the molar ratio of EDA to CA was 0.5, excessive CA did not undergo an amidation reaction but rather attained molecular clusters directly through intermolecular forces. These oligomers exhibited significant differences in their surface functional groups, which would affect the carbonization process and the surface structure of CDs.

Clozapine-laden carbon dots delivered to the brain via an intranasal pathway: Synthesis, characterization, ex vivo, and in vivo studies

Clozapine, which is widely used to treat schizophrenia, shows low bioavailability due to poor solubility and high first-pass metabolism. The study aimed to design clozapine-loaded carbon dots (CDs) to enhance availability of the clozapine to the brain via intranasal pathway. The CDs were synthesized by pyrolysis of citric acid and urea at 200 °C by hydrothermal technique and characterized by photoluminescence, transmission electron microscopy (TEM), X-ray Photoelectron Spectrometer (XPS), and Fourier transform infrared spectrum (FTIR). The optimized clozapine-loaded CDs (CLZ-CDs-1:3-200) showed a quasi-spherical shape (9-12 nm) with stable blue fluorescence. The CDs showed high drug solubilization capacity (1.5 mg drug in 1 mg/ml CDs) with strong electrostatic interaction with clozapine (drug loading efficiency = 94.74%). The ex vivo release study performed using nasal goat mucosa showed sustained release of clozapine (43.89%) from CLZ-CDs-1:3-200 for 30 h. The ciliotoxicity study (histopathology) confirmed no toxicity to the nasal mucosal tissues using CDs. In the rat model (in vivo pharmacokinetic study), when CDs were administrated by the intranasal route, a significantly higher concentration of clozapine in the brain tissue (Cmax = 58.07 ± 5.36 μg/g and AUCt (µg/h*g) = 105.76 ± 12.31) was noted within a short time (tmax = 1 h) compared to clozapine suspension administered by intravenous route (Cmax = 20.99 ± 3.91 μg/g, AUC t (µg/h*g) = 56.89 ± 12.31, and tmax = 4 h). The high value of drug targeting efficiency (DTE, 486%) index and direct transport percentage (DTP, 58%) indicates the direct entry of clozapine-CDs in the brain via the olfactory route. In conclusion, designed CDs demonstrated a promising dosage form for targeted nose-to-brain delivery of clozapine for the effective treatment of schizophrenia.

Effect of aggregation configuration of molecular fluorophore CZA on photoluminescence properties of carbon dots

The effect of aggregation configuration of molecular fluorophore citrazinic acid (CZA) on the photoluminescence (PL) properties of carbon dots (CDs) has been investigated using first-principles method. The structural stability of all aggregates has been analyzed, and the results show that the most stable structures are J-type CZA aggregates with head-to-tail configurations and the CZA/CD aggregates are bonded by replacing H atoms on the CD edges with de-OH from the pyridine ring of CZA. The luminescent properties of CZA/CD aggregates are mainly affected by the binding modes and binding sites. When the sites belong to electron-donating groups, electron-withdrawing groups or sp2 domain, the PL spectra of CDs are shifted and the luminescent intensities are significantly enhanced. The results suggest that covalently bonded CZA/CD aggregates are responsible for the high fluorescence quantum yield of CD. Moreover, the distance between the centers of the two pyridine rings in H-type CZA dimers less than 3.5 Å is prone to π-π stacking, leading to fluorescence quenching of aggregates. The present work is helpful in understanding the effect of molecular fluorophores on the PL properties of CDs and provides theoretical guidance for the controllable synthesis of CDs.

Separation and purification of fluorescent carbon dots - an unmet challenge

Literature reports demonstrate versatile optical applications of fluorescent carbon dots (CDs) in biological imaging, full-color solid-state lighting, optoelectronics, sensing, anticounterfeiting and so on. The fluorescence associated with CDs may originate significantly from byproducts generated during their synthesis, which need to be eliminated to achieve error-free results. The significance of purification, specifically for luminescence-based characterizations, is highly critical and imperative. Thus, there is a pressing demand to implement consistent and adequate purification strategies to reduce sample complexity and thereby realize reliable results that can provide a tactical steppingstone towards the advancement of CDs as next-generation optical materials. The article focuses on the mechanism of origin of fluorescence from CDs and further demonstrates the different purification approaches including dialysis, centrifugation, filtration, solvent extraction, chromatography, and electrophoresis that have been adopted by various researchers. Furthermore, the fundamental separation mechanism, as well as the advantages and limitations of each of these purification techniques are discussed. The article finally provides the critical challenges of these purification techniques that need to be overcome to obtain homogeneous CD fractions that demonstrate coherent and reliable optical features for suitable applications.

Green and Red Emissive N,O-Doped Chiral Carbon Dots Functionalized with l-Cysteine

Although chirality plays an important role in the natural world, it has also attracted much scientific attention in nanotechnology, in particular, spintronics and bioapplications. Chiral carbon dots (CDs) are promising nanoparticles for sensing and bioimaging since they are biocompatible, ecofriendly, and free from toxic elements. Herein, green and red emissive chiral CDs are fabricated via surface modification treatment of achiral CDs at room temperature. After modification with l-cysteine molecules, the treated CDs demonstrate an intense chiral signal in the region of 200-300 nm with a dissymmetry factor up to 2.3 × 10-4 and high photoluminescence quantum yields of 19% and 15% for green and red emission bands, respectively. These CDs preserve their chiral signal in different ion systems, such as those with pH changes or in the presence of metal ions, along with remarkably low cytotoxicity, making them potential candidates for use as photoluminescent labels for biological objects.

Synthesis of oil-soluble carbon dots via pyrolysis and their diverse applications in doxycycline detection, fluorescent ink and film

The overuse of doxycycline poses a risk for ecological environment. Advanced materials such as anti-counterfeiting and photovoltaic materials are urgently needed to develop innovative strategies for exploiting solar cells and protecting valuable products. Herein, oil-soluble CDs (o-CDs) were successfully fabricated from citric acid, tris-base and oleylamine as precursors via pyrolysis method. The o-CDs with uniform size distribution exhibited a high quantum yield of 0.48 and excellent photostability. The fluorescence of o-CDs was rapidly quenched by doxycycline at room temperature without further modification. Optimal conditions were selected to construct a fluorescence probe with high selectivity and good sensitivity to detect doxycycline. Interestingly, the probe achieved two linear ranges of 0.85--16.7 µM and 16.7--33.4 µM with a low detection limit of 0.26 µM. Furthermore, inner filter effect (IFE) was dominated in the process in which doxycycline interact with the oxygen-containing groups of o-CDs. This sensing platform has been further successfully applied to the detection of doxycycline in milk with recovery rates of 96.8%- 102.7% and relative standard deviations of 0.98%- 1.02%, suggesting that the novel probe has the potential to be applied in real samples. Moreover, o-CDs directly serve as fluorescence ink and work as fluorescence film using PVA as matrix because of strong fluorescence in the solid state, indicating that they have potential applications in anti-counterfeiting and photovoltaic materials. This is the first report that oil-soluble CDs via pyrolysis is applied in the detection of doxycycline in milk. Importantly, this work provides efficient strategies for the construction of anti-counterfeiting and photovoltaic materials.

Baicalin functionalized PEI-heparin carbon dots as cancer theranostic agent

The worldwide prevalence of cancer and its significantly rising risks with age have garnered the attention of nanotechnology for prompt detection and effective therapy with minimal or no adverse effects. In the current study, heparin (HP) polymer derived heteroatom (N, S-) co-doped CDs were synthesized using hydrothermal synthesis method to efficiently deliver natural anticancer compound baicalin (BA). Heparin carbon dots (HCDs) were passivated with polyethylenimine (PEI) to improve its fluorescence quantum yield. The surface passivation of CDs by polycationic PEI polymer not only facilitated loading of BA, but also played a crucial role in the pH-responsive drug delivery. The sustained release of BA (up to 80 %) in mildly acidic pH (5.5 and 6.5) conditions endorsed its drug delivery potential for cancer-specific microenvironments. BA-loaded PHCDs exhibited enhanced anticancer activity as compared to BA/PHCDs indicating the effectiveness of the nanoformulation, Furthermore, the flow cytometry analysis confirmed that BA-PHCDs treated cells were arrested in the G2/M phase of cell cycle and had a higher potential for apoptosis. Bioimaging study demonstrated the excellent cell penetration efficiency of PHCDs with complete cytoplasmic localization. All this evidence comprehensively demonstrates the potency of BA-loaded PHCDs as a nanotheranostic agent for cancer.

Synthesis Strategies, Optical Mechanisms, and Applications of Dual-Emissive Carbon Dots

Tuning the optical properties of carbon dots (CDs) and figuring out the mechanisms underneath the emissive phenomena have been one of the most cutting-edge topics in the development of carbon-based nanomaterials. Dual-emissive CDs possess the intrinsic dual-emission character upon single-wavelength excitation, which significantly benefits their multi-purpose applications. Explosive exploitations of dual-emissive CDs have been reported during the past five years. Nevertheless, there is a lack of a systematic summary of the rising star nanomaterial. In this review, we summarize the synthesis strategies and optical mechanisms of the dual-emissive CDs. The applications in the areas of biosensing, bioimaging, as well as photoelectronic devices are also outlined. The last section presents the main challenges and perspectives in further promoting the development of dual-emissive CDs. By covering the most vital publications, we anticipate that the review is of referential significance for researchers in the synthesis, characterization, and application of dual-emissive CDs.

Hierarchical Self-Assembly of Carbon Dots into High-Aspect-Ratio Nanowires

We report a spontaneous and hierarchical self-assembly mechanism of carbon dots prepared from citric acid and urea into nanowire structures with large aspect ratios (>50). Scattering-type scanning near-field optical microscopy (s-SNOM) with broadly tunable mid-IR excitation was used to interrogate details of the self-assembly process by generating nanoscopic chemical maps of local wire morphology and composition. s-SNOM images capture the evolution of wire formation and the complex interplay between different chemical constituents directing assembly over the nano- to microscopic length scales. We propose that residual citrate promotes tautomerization of melamine surface functionalities to produce supramolecular shape synthons comprised of melamine-cyanurate adducts capable of forming long-range and highly directional hydrogen-bonding networks. This intrinsic, heterogeneity-driven self-assembly mechanism reflects synergistic combinations of high chemical specificity and long-range cooperativity that may be harnessed to reproducibly fabricate functional structures on arbitrary surfaces.

Carbon dots derived from citric acid and urea as fluorometric probe for determining melamine contamination in infant formula sample

Melamine has been intentionally added into food products to increase the protein count at less cost, especially in dairy products for infant resulting in serious adverse effects on health of consumers. Therefore, this study aimed to develop a method to quantify melamine in dairy products based on the change of fluorescent properties of carbon dots (CDs) as sensing probe. CDs with green-fluorescent emission were synthesized from citric acid and urea under microwave irradiation. The synthesized CDs emitted fluorescence at the maximum wavelength of 538 nm with excitation wavelength of 410 nm. Thus, they provided high sensitivity and selectivity on melamine detection by which fluorescent emission of the CDs was increasingly quenched upon increasing melamine concentrations. Optimal conditions for melamine determination using the CDs was under pH 6, volume ratio between CDs and sample of 2:8 and reaction time of 15 min. The developed method provided high precision of melamine determination with less than 5% of %RSD (n = 5), wide detection range from 1.0 to 200.0 ppm, and high sensitivity with limit of detection (LOD) of 0.47 ppm and limit of quantification (LOQ) of 1.56 ppm, which is within the regulated level by the Food and Drug Administration of the United States for melamine in dairy products. Several analytical characterization techniques were conducted to elucidate the reaction mechanism between CDs and melamine, and the hydrogen bonding interaction was proposed.

Carbon Quantum Dots with High Photothermal Conversion Efficiency and Their Application in Photothermal Modulated Reversible Deformation of Poly(N-isopropylacrylamide) Hydrogel

The fluorescence of carbon quantum dots (CQDs) has been paid a lot of attention, but its photothermal performance attracts less attention since preparing CQDs with high photothermal conversion efficiency (PCE) is a big challenge. In this work, CQDs with an average size of 2.3 nm and a PCE of up to 59.4% under 650 nm laser irradiation were synthesized by a simple one-pot microwave-assisted solvothermal method using citric acid (CA) and urea (UR) as the precursors and N,N-dimethylformamide as the solvent under an optimized condition (CA/UR = 1/7, 150 °C, and 1 h). The as-prepared CQDs were demonstrated to have unique surface chemical states; i.e., abundant pyrrole, amide, carboxyl, and hydroxyl groups were found on the surfaces of CQDs, which ensure a high PCE. These CQDs were introduced into a thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) to form a CQDs@PNIPAM nanocomposite, and then, a bilayer hydrogel composed of CQDs@PNIPAM and polyacrylamide (PAM) was fabricated. The bilayer hydrogel can be reversibly deformed just by a light switching on/off operation. Based on the excellent photothermal performance, the developed CQDs are expected to be used in photothermal therapy, photoacoustic imaging, and other biomedical fields, and the CQDs@PNIPAM hydrogel nanocomposite is promising to be applied in intelligent device systems as a light-driven smart flexible material.

Synthesis, properties and potential applications of photoluminescent carbon nanoparticles: A review

Photoluminescent-carbon nanoparticles (PL-CNPs) are a new class of materials that received immense interest among researchers due to their distinct characteristics, including photoluminescence, high surface-to-volume ratio, low cost, ease of synthesis, high quantum yield, and biocompatibility. By exploiting these outstanding properties, many studies have been reported on its utility as sensors, photocatalysts, probes for bio-imaging, and optoelectronics applications. From clinical applications to point-of-care test devices, drug loading to tracking of drug delivery, and other research innovations demonstrated PL-CNPs as an emerging material that could substitute conventional approaches. However, some of the PL-CNPs have poor PL properties and selectivity due to the presence of impurities (e.g., molecular fluorophores) and unfavourable surface charges by the passivation molecules, which impede their applications in many fields. To address these issues, many researchers have been paying great attention to developing new PL-CNPs with different composite combinations to achieve high PL properties and selectivity. Herein, we thoroughly discussed the recent development of various synthetic strategies employed to prepare PL-CNPs, doping effects, photostability, biocompatibility, and applications in sensing, bioimaging, and drug delivery fields. Moreover, the review discussed the limitations, future direction, and perspectives of PL-CNPs in possible potential applications.

Citric Acid-Based Intrinsic Band-Shifting Photoluminescent Materials

Citric acid, an important metabolite with abundant reactive groups, has been demonstrated as a promising starting material to synthesize diverse photoluminescent materials including small molecules, polymers, and carbon dots. The unique citrate chemistry enables the development of a series of citric acid-based molecules and nanomaterials with intriguing intrinsic band-shifting behavior, where the emission wavelength shifts as the excitation wavelength increases, ideal for chromatic imaging and many other applications. In this review, we discuss the concept of "intrinsic band-shifting photoluminescent materials", introduce the recent advances in citric acid-based intrinsic band-shifting materials, and discuss their potential applications such as chromatic imaging and multimodal sensing. It is our hope that the insightful and forward-thinking discussion in this review will spur the innovation and applications of the unique band-shifting photoluminescent materials.

Exploring the Impact of Nitrogen Doping on the Optical Properties of Carbon Dots Synthesized from Citric Acid

The differences between bare carbon dots (CDs) and nitrogen-doped CDs synthesized from citric acid as a precursor are investigated, aiming at understanding the mechanisms of emission and the role of the doping atoms in shaping the optical properties. Despite their appealing emissive features, the origin of the peculiar excitation-dependent luminescence in doped CDs is still debated and intensively being examined. This study focuses on the identification of intrinsic and extrinsic emissive centers by using a multi-technique experimental approach and computational chemistry simulations. As compared to bare CDs, nitrogen doping causes the decrease in the relative content of O-containing functional groups and the formation of both N-related molecular and surface centers that enhance the quantum yield of the material. The optical analysis suggests that the main emission in undoped nanoparticles comes from low-efficient blue centers bonded to the carbogenic core, eventually with surface-attached carbonyl groups, the contribution in the green range being possibly related to larger aromatic domains. On the other hand, the emission features of N-doped CDs are mainly due to the presence of N-related molecules, with the computed absorption transitions calling for imidic rings fused to the carbogenic core as the potential structures for the emission in the green range.

Tuning the Luminescence of Microwave-Assisted N-Doped Fluorescent Carbon Dots: Bioimaging Applications and Label-Free Anti-Cancer Drug Delivery

Nanosized fluorescent carbon dots (Cdots) have gained a lot of attention in the recent years because of their superior properties, such as good biocompatibility, low toxicity, excellent chemical stability, resistance to photobleaching, and ease of chemical modification. Cdots are promising candidates for considerable applications in various fields: sensors, bioimaging, and drug delivery. Specifically, nitrogen-doped Cdots have attracted a huge interest because of their applicability in bioimaging and drug delivery. Conventional methods for the synthesis of Cdots have drawbacks, such as the use of organic solvents, the presence of side products, and the time required for synthesis. Keeping all these points in mind, herein, we report green methodology for the synthesis of water-soluble, blue-emitting, nitrogen-doped multifunctional Cdots under microwave irradiation within 3 min. The Cdots were prepared using citric acid and arginine as source materials and were characterized using various physicochemical techniques. A pH-responsive drug delivery system was then designed using anticancer drug doxorubicin and the synthesized Cdots. The biocompatibility of synthesized Cdots was analyzed against L929 normal cell line. The Cdots-DOX conjugates exhibited efficient anticancer activity against HeLa cells and also acted as excellent bioimaging agents.

Selecting molecular or surface centers in carbon dots-silica hybrids to tune the optical emission: A photo-physics study down to the atomistic level

In this work, we unveil the fluorescence features of citric acid and urea-based Carbon Dots (CDs) through a photo-physical characterization of nanoparticles synthesized, under solvent-free and open-air conditions, within silica-ordered mesoporous silica, as a potential host for solid-state emitting hybrids. Compared to CDs synthesized without silica matrices and dispersed in water, silica-CD hybrids display a broader emission in the green range whose contribution can be increased by UV and blue laser irradiation. The analysis of hybrids synthesized within different silica (MCM-48 and SBA-15) calls for an active role of the matrix in directing the synthesis toward the formation of CDs with a larger content of graphitic N and imidic groups at the expense of N-pyridinic molecules. As a result, CDs tuned in size and with a larger green emission are obtained in the hybrids and are retained once extracted from the silica matrix and dispersed in water. The kinetics of the photo-physics under UV and blue irradiation of hybrid samples show a photo-assisted formation process leading to a further increase of the relative contribution of the green emission, not observed in the water-dispersed reference samples, suggesting that the porous matrix is involved also in the photo-activated process. Finally, we carried out DFT and TD-DFT calculations on the interaction of silica with selected models of CD emitting centers, like surface functional groups (OH and COOH), dopants (graphitic N), and citric acid-based molecules. The combined experimental and theoretical results clearly indicate the presence of molecular species and surface centers both emitting in the blue and green spectral range, whose relative contribution is tuned by the interaction with the surrounding media.

Understanding the Visible Absorption of Electron Accepting and Donating CNDs

Carbon nanodots (CNDs) synthesized from citric acid and formyl derivatives, that is, formamide, urea, or N-methylformamide, stand out through their broad-range visible-light absorbance and extraordinary photostability. Despite their potential, their use has thus far been limited to imaging research. This work has now investigated the link between CNDs' photochemical properties and their chemical structure. Electron-rich, yellow carbon nanodots (yCNDs) are obtained with in situ addition of NaOH during the synthesis, whereas otherwise electron-poor, red carbon nanodots (rCNDs) are obtained. These properties originate from the reduced and oxidized dimer of citrazinic acid within the matrix of yCNDs and rCNDs, respectively. Remarkably, yCNDs deposited on TiO₂ give a 30% higher photocurrent density of 0.7 mA cm^-2 at +0.3 V versus Ag/AgCl under Xe-lamp irradiation (450 nm long-pass filter, 100 mW cm^-2 ) than rCNDs. The difference in overall photoelectric performance is due to fundamentally different charge-transfer mechanisms. These depend on either the electron-accepting or the electron-donating nature of the CNDs, as is evident from photoelectrochemical tests with TiO₂ and NiO and time-resolved spectroscopic measurements.

On-site Simultaneous Determination of Neonicotinoids, Carbamates, and Phenyl Pyrazole Insecticides in Vegetables by QuEChERS Extraction on Nitrogen and Sulfur co-doped Carbon Dots and Portable Mass Spectrometry

In food safety monitoring, on-site and simultaneous detection of a variety of insecticides with different concentrations in the same matrix is necessary. However, the task remains challenging. In this study, a novel nitrogen and sulfur co-doped carbon dot (N, S-CD) was synthesized and used as a QuEChERS clean-up reagent to reduce matrix interferences in the determination of insecticides in vegetables. In addition, a portable mass spectrometer (µ-MS) was employed, without chromatography separation, to directly determine neonicotinoids, carbamates, and benzopyrazole insecticides (with acetamiprid, imidacloprid, thiamethoxam, fipronil, and carbofuran as models) in the pretreated samples. The N,S-CD µ-MS method exhibited effective clean-up performance with satisfactory matrix effects between -15.2% and 15.7%. The recoveries of spiked vegetable samples ranged from 82.2% to 109.7% for the five target insecticides, and the relative standard deviations (RSDs) ranged from 3.8% to 16.5%. The linear ranges were from 2.0 to 5.0 ng/g, with low detection limits (LOD) from 0.5 to 1.0 ng/g. Moreover, the total pretreatment and detection time was within 20 min. Thus, the incorporation of N,S-CD with QuEChERS extraction, together with the portable µ-MS system, could be a promising and feasible strategy for on-site, rapid, and simultaneous detection of various insecticides in vegetables.

Chemically induced crosslinked enhanced emission of carbon polymer dots discerning healthy and cancer cells through pH-dependent tunable photoluminescence

Chemically induced crosslinked enhanced emission (CEE) of urea and citric acid-derived carbon polymer dot (CPD) nanoparticles is established here with a rare zero linker approach, i.e. without the use of any separate crosslinkers. Such chemical CEE like any chemical reaction was achieved through amide bond formation using carbodiimide chemistry, pointing towards the feasibility of developing a general methodology for their formation through engineering the nanoparticle surface functionality. Exhaustive characterization was done to pinpoint the structure, morphology, and photophysics of the CPDs and concurrently eliminate the possibility of the involvement and interference by molecular fluorophores for the unique optical tuning of the CPDs. The structure-photophysics relation was further restated through theoretical studies involving density functional theory (DFT) that correlated significantly well with the experimental findings. Most interestingly, the CPDs revealed pH responsiveness due to the formation or hydrolysis of amide bonds with acid or base, respectively, which was manifested through a spectacular change in fluorescence emission visible to the naked eye through UV illumination. This distinct pH-dependent photoluminescence properties of CPDs opens up an enormous opportunity for interesting applications, including discriminating normal and cancerous cells, which we demonstrate herein as a proof of concept through in vitro imaging.

One-Pot Synthesis of Dual Color-Emitting CDs: Numerical and Experimental Optimization towards White LEDs

Carbon Dots (CDs) are fluorescent carbon-based nanoparticles that have attracted increasing attention in recent years as environment-friendly and cost-effective fluorophores. An application that can benefit from CDs in a relatively short-term perspective is the fabrication of color-converting materials in phosphor-converted white LEDs (WLEDs). In this work we present a one-pot solvothermal synthesis of polymer-passivated CDs that show a dual emission band (in the green and in the red regions) upon blue light excitation. A purposely designed numerical approach enables evaluating how the spectroscopic properties of such CDs can be profitable for application in WLEDs emulating daylight characteristics. Subsequently, we fabricate nanocomposite coatings based on the dual color-emitting CDs via solution-based strategies, and we compare their color-converting properties with those of the simulated ones to finally accomplish white light emission. The combined numerical and experimental approach can find a general use to reduce the number of experimental trial-and-error steps required for optimization of CD optical properties for lighting application.

Carbon-based glyco-nanoplatforms: towards the next generation of glycan-based multivalent probes

Cell surface carbohydrates mediate a wide range of carbohydrate-protein interactions key to healthy and disease mechanisms. Many of such interactions are multivalent in nature and in order to study these processes at a molecular level, many glycan-presenting platforms have been developed over the years. Among those, carbon nanoforms such as graphene and their derivatives, carbon nanotubes, carbon dots and fullerenes, have become very attractive as biocompatible platforms that can mimic the multivalent presentation of biologically relevant glycosides. The most recent examples of carbon-based nanoplatforms and their applications developed over the last few years to study carbohydrate-mediate interactions in the context of cancer, bacterial and viral infections, among others, are highlighted in this review.

Synthesis Processes, Photoluminescence Mechanism, and the Toxicity of Amorphous or Polymeric Carbon Dots

Fluorescence is the emission of light following photon absorption. This optical phenomenon has many applications in daily life, such as in LED lamps, forensics, and bioimaging. Traditionally, small-molecule fluorophores were most common, but the types of molecules and particles with compelling fluorescence properties have expanded. For example, green fluorescent protein (GFP) was isolated from jellyfish and won the Nobel prize in 2008 due to its significant utility as a fluorescent biomarker. Using the intrinsic fluorescence of GFP, many previously invisible biological processes and substances can now be observed and studied. Other fluorescent materials have also been developed, greatly expanding the potential applications. Semiconductor quantum dots (QDs), which have bright fluorescence and a narrow bandwidth, are a popular choice for display technologies. However, QDs are made of heavy metal elements such as Cd and Se, which pose potential safety concerns to the environment and human health. Thus, new fluorescent organic materials are being developed to mitigate the toxicological concerns while maintaining the QD advantages.One type of new material attracting great attention as an environmentally friendly substitute for semiconductor QDs is carbon dots (CDs). CDs have been developed with strong fluorescence, good photostability, and low toxicity using a variety of precursors, and some synthesis processes have good potential for scale-up. However, since they are made of a variety of materials and through different methods, the structure and properties of CDs can differ from preparation to preparation. There are three major types of CDs: graphene quantum dots (GQDs), carbon quantum dots (CQDs), and amorphous or polymeric carbon dots (PCDs). This Account focuses on PCDs and their unique properties by comparing it with other types of CDs. The synthesis processes, fluorescence properties, fluorescence mechanisms, and toxicity are discussed below with an emphasis on the distinct attributes of PCDs.PCDs can be synthesized from small molecules or polymers. They have an amorphous or cross-linked polymer structure with bright fluorescence. This fluorescence is possibly due to cross-link-enhanced emission or clusteroluminescence that arises from the through-space interactions of heteroatomic-rich functional groups. Other fluorescence mechanisms of CDs, including distinct contributions from the carbon core and surface states, may also contribute. The toxicological profiles of CDs are influenced by the chemical composition, surface functionalization, and light illumination. CDs are generally thought to be of low toxicity, and this can be further improved by removing toxic byproducts, functionalizing the surface, and reducing light exposure to minimize the generation of reactive oxygen species.

Influence of particle size of flame-synthesized carbon nanoparticles on band gap and photoluminescence properties

Band gap and photoluminescence (PL) properties were investigated for flame-synthesized carbon nanoparticles (CNPs) of four different particle size distributions. The particles were collected by varying the flow rates of fuel and oxidizer in a controllable co-flow diffusion flame. The results indicated the possibility of both direct and indirect band gaps in the synthesized CNPs. The band gaps were found to increase with a decrease in the particle size, thereby exhibiting the quantum confinement effect. The PL properties observed with the pure powdered sample showed strong emission in the green region. However, for samples dispersed in isopropyl alcohol, the emission wavelength shifts towards the blue region, showing strong solvent dependence. The particle size of CNPs, however, only affects the emission peak intensities.

A Facile Approach to the Hydrothermal Synthesis of Silica Nanoparticle/Carbon Nanostructure Luminescent Composites

Luminescent carbon nanostructures (CNSs) have been intensively researched, but there is still no consensus on a fundamental understanding of their structure and properties that limits their potential applications. In this study, we developed a facile approach to the synthesis of luminescent composite SiO₂ nanoparticles/CNSs by the targeted formation of a molecular fluorophore, as the significant luminescent component of CNSs, on the surface of a silica matrix during a one-stage hydrothermal synthesis. Silica nanoparticles were synthesized by reverse microemulsion and used as a matrix for luminescent composites. The as-prepared silica nanoparticles had a functional surface, a spherical shape, and a narrow size distribution of about 29 nm. One-stage hydrothermal treatment of citric acid and modified silica nanoparticles made it possible to directly form the luminescent composite. The optical properties of composites could be easily controlled by changing the hydrothermal reaction time and temperature. Thus, we successfully synthesized luminescent composites with an emission maximum of 450 nm, a quantum yield (QY) of 65 ± 4%, and an average size of ~26 nm. The synthesis of fluorophore doped composite, in contrast to CNSs, makes it possible to control the shape, size, and surface functionality of particles and allows for avoiding difficult and time-consuming fractionation steps.

The role of molecular fluorophores in the photoluminescence of carbon dots derived from citric acid: current state-of-the-art and future perspectives

Carbon dots (CDs), an emerging class of nanomaterials, have attracted considerable attention due to their intriguing photophysical properties. Despite their indisputable potential of utilization in many fascinating areas of research and life, some fundamental aspects concerning their structure and the origin of their photoluminescence (PL) properties still await clarification. The mechanism of PL emission of CDs is associated with their structure, which is dependent on the carbonization process. At the initial stages of CD synthesis via a bottom-up approach, molecular fluorophores are considered to dominate the optical characteristics of the resulting nanomaterials. In this review, the recent progress in the use of molecular state theory for explanation of the structure-property relationship in CDs is summarized. This review focuses exclusively on the molecular fluorophores existing in nanomaterials prepared from citric acid (CA) as one of the most frequent carbon sources reported for the bottom-up synthesis of CDs. Consequently, the most relevant transformations of CA and the history of molecular fluorophores derived from it are described, followed by an in-depth discussion on their relevance in understanding the specific photophysical properties of blue-, green-, and red-emitting CDs. Finally, the challenging issues and future perspectives of molecular state PL mechanism exploration in CDs are highlighted.

Carbon Nanodots from an In Silico Perspective

Carbon nanodots (CNDs) are the latest and most shining rising stars among photoluminescent (PL) nanomaterials. These carbon-based surface-passivated nanostructures compete with other related PL materials, including traditional semiconductor quantum dots and organic dyes, with a long list of benefits and emerging applications. Advantages of CNDs include tunable inherent optical properties and high photostability, rich possibilities for surface functionalization and doping, dispersibility, low toxicity, and viable synthesis (top-down and bottom-up) from organic materials. CNDs can be applied to biomedicine including imaging and sensing, drug-delivery, photodynamic therapy, photocatalysis but also to energy harvesting in solar cells and as LEDs. More applications are reported continuously, making this already a research field of its own. Understanding of the properties of CNDs requires one to go to the levels of electrons, atoms, molecules, and nanostructures at different scales using modern molecular modeling and to correlate it tightly with experiments. This review highlights different in silico techniques and studies, from quantum chemistry to the mesoscale, with particular reference to carbon nanodots, carbonaceous nanoparticles whose structural and photophysical properties are not fully elucidated. The role of experimental investigation is also presented. Hereby, we hope to encourage the reader to investigate CNDs and to apply virtual chemistry to obtain further insights needed to customize these amazing systems for novel prospective applications.

Photobleaching and Recovery Kinetics of a Palette of Carbon Nanodots Probed by In Situ Optical Spectroscopy

Carbon dots (CDs) are a family of fluorescent nanoparticles displaying a wide range of interesting properties, which make them attractive for potential applications in different fields like bioimaging, photocatalysis, and many others. However, despite many years of dedicated studies, wide variations exist in the literature concerning the reported photostability of CDs, and even the photoluminescence mechanism is still unclear. Furthermore, an increasing number of recent studies have highlighted the photobleaching (PB) of CDs under intense UV or visible light beams. PB phenomena need to be fully addressed to optimize practical uses of CDs and can also provide information on the fundamental mechanism underlying their fluorescence. Moreover, the lack of systematic studies comparing several types of CDs displaying different fluorescence properties represents another gap in the literature. In this study, we explored the optical properties of a full palette of CDs displaying a range from blue to red emissions, synthesized using different routes and varying precursors. We investigated the photostability of different CDs by observing in situ their time-resolved fluorescence degradation or optical absorption changes under equivalent experimental conditions and laser irradiation. The results about different PB kinetics clearly indicate that even CDs showing comparable emission properties may exhibit radically different resistances to PB, suggesting systematic connections between the resistance to PB, the characteristic spectral range of emission, and CD quantum yields. To exploit the PB dynamics as a powerful tool to investigate CD photophysics, we also carried out dedicated experiments in a partial illumination geometry, allowing us to analyze the recovery of the fluorescence due to diffusion. Based on the experimental results, we conclude that the nature of the CD fluorescence cannot be solely ascribable to small optically active molecules free diffusing in solution, contributing to shed light on one of the most debated issues in the photophysics of CDs.

Unconventional aliphatic fluorophores discovered as the luminescence origin in citric acid-urea carbon dots

Carbon dots (CDs) are emerging as the material of choice in a range of applications due to their excellent photoluminescence properties, ease of preparation from inexpensive precursors, and low toxicity. However, the precise nature of the mechanism for the fluorescence is still under debate, and several molecular fluorophores have been reported. In this work, a new blue fluorophore, 5-oxopyrrolidine-3-carboxylic acid, was discovered in carbon dots synthesized from the most commonly used precursors: citric acid and urea. The molecular product alone has demonstrated interesting aggregation-enhanced emission (AEE), making it unique compared to other fluorophores known to be generated in CDs. We propose that this molecular fluorophore is associated with a polymer backbone within the CDs, and its fluorescence behavior is largely dependent on intermolecular interactions with the polymers or other fluorophores. Thus, a new class of non-traditional fluorophores is now relevant to the consideration of the CD fluorescence mechanism, providing both an additional challenge to the community in resolving the mechanism and an opportunity for a greater range of CD design schemes and applications.

Recent Advances in Synthesis, Modification, Characterization, and Applications of Carbon Dots

Although there is significant progress in the research of carbon dots (CDs), some challenges such as difficulty in large-scale synthesis, complicated purification, low quantum yield, ambiguity in structure-property correlation, electronic structures, and photophysics are still major obstacles that hinder the commercial use of CDs. Recent advances in synthesis, modification, characterization, and applications of CDs are summarized in this review. We illustrate some examples to correlate process parameters, structures, compositions, properties, and performances of CDs-based materials. The advances in the synthesis approach, purification methods, and modification/doping methods for the synthesis of CDs are also presented. Moreover, some examples of the kilogram-scale fabrication of CDs are given. The properties and performance of CDs can be tuned by some synthesis parameters, such as the incubation time and precursor ratio, the laser pulse width, and the average molar mass of the polymeric precursor. Surface passivation also has a significant influence on the particle sizes of CDs. Moreover, some factors affect the properties and performance of CDs, such as the polarity-sensitive fluorescence effect and concentration-dependent multicolor luminescence, together with the size and surface states of CDs. The synchrotron near-edge X-ray absorption fine structure (NEXAFS) test has been proved to be a useful tool to explore the correlation among structural features, photophysics, and emission performance of CDs. Recent advances of CDs in bioimaging, sensing, therapy, energy, fertilizer, separation, security authentication, food packing, flame retardant, and co-catalyst for environmental remediation applications were reviewed in this article. Furthermore, the roles of CDs, doped CDs, and their composites in these applications were also demonstrated.

Pyrolysis and Solvothermal Synthesis for Carbon Dots: Role of Purification and Molecular Fluorophores

Over the last decade, the interest in carbon dots, graphene dots, or similar carbon-based nanoparticles has increased considerably. This interest is based on potentially high fluorescent quantum yields, controllable excitation-dependent emission, low toxicity, and convenient reaction conditions. Carbon dots are often seen as a promising alternative to classical semiconductor quantum dots that are typically made from toxic semiconductor materials. Surprisingly, aspects like the atomic structure, composition, mechanism of formation, and precise understanding of the photophysical properties of carbon dots are still mostly unknown. The large number of different precursor systems and the variety in synthesis routes make a direct comparison of different systems difficult. To advance this, we went for a systematic approach and compared the results of four synthesis routes using two different precursor systems. We used different spectroscopy and microscopy methods including fluorescence correlation spectroscopy to characterize the different reaction products. We found that for syntheses solely based on citric acid as the precursor, we obtain particles where the emission wavelength is strongly dependent on the excitation wavelength despite relatively low quantum yields. In comparison, when urea is added as a nitrogen doping reactant, we observe vastly increased quantum yields. By making use of a combination of dialysis and column chromatography, we were able to isolate various luminescent species with high quantum yields and verify the existence of different molecular fluorophores. A detailed and consistent characterization of the reaction products during the course of purification revealed strong interactions between molecular fluorophores and larger reaction products.

Nuclear Magnetic Resonance Reveals Molecular Species in Carbon Nanodot Samples Disclosing Flaws

Carbon nanodots are currently one of the hot topics in the nanomaterials world, due to their accessible synthesis and promising features. However, the purification of these materials is still a critical aspect, especially for syntheses involving molecular precursors. Indeed, the presence of unreacted species or small organic molecules formed during solvothermal treatments can affect the properties of the synthesized nanomaterials. To illustrate the extreme importance of this issue, we present two case studies in which insufficient purification results in misleading conclusions regarding the chiral and fluorescent properties of the investigated materials. Key to identify molecular species is the use of nuclear magnetic resonance, which proves to be an effective tool. Our work highlights the need to include nuclear magnetic resonance as a standard characterization technique for carbon-based nanomaterials, to minimize the risk of observing properties that arise from molecular species, rather than the target carbon nanodots.

Precursor structure-determined fluorescence labeling for mesenchymal stem cells among four polyethylenimine-based carbon quantum dots

A series of polyethylenimine (PEI)-based CQDs have been synthesized via a hydrothermal method by mixing linear PEI with linear citric acid (CA with COOH groups, PEICA), linear glucose (G with OH groups, PEIG), cyclic hyaluronic acid (HA with COOH groups, PEIHA) and cyclic boron nitride (BN with OH groups, PEIBN). PEICA had the best labeling effect (100.00 ± 0.26%) and the lowest cytotoxicity (100.89 ± 18.00%) for mesenchymal stem cells (MSCs), followed by PEIG (91.83 ± 7.60%; 92.84 ± 5.56%), PEIHA (84.34 ± 7.87%; 61.27 ± 11.34%) and PEIBN (1.33 ± 0.84%; 22.72 ± 11.47%). The labeling effect of PEIHA for MSCs is lower than that of PEIG because the surface potential of PEIHA (6.58 mV) is higher than that of PEIG (0.50 mV). For PEIBN, it is likely that the precursor (BN) is less biocompatible than CA, HA and glucose. Thus, the linear acid (CA) is more appropriate to react with PEI for synthesizing CQDs with high labeling performance for MSCs. The control experimental results show that factors (such as surface potential, aromatic component, etc.) may all contribute to MSC labeling by PEICA. This work is helpful to design CQDs with high MSC labeling efficiency.

The fluorescence mechanism of carbon dots based on the separation and identification of small molecular fluorophores

Carbon dots (CDs) have attracted much attention in theoretical researches and their practical applications due to their excellent optical properties, and many researchers discovered that flurophores play a very important role in synthesis process of CDs and the luminescence of prepared CDs. In this study, two CDs were pyrolysis with citric acid, N-acetyl-l-cysteine and glutathione derivatives as carbon sources. Four intermediate small molecules were separated from the prepared CDs through ultrafiltration and chromatography, and their chemical structures were determined. The formation process of CDs was monitored through identified small molecule intermediates and HPLC. It is speculated that the two CDs have the same formation pathway, including TPA (5-oxo-2,3-dihydro-5H-[1,3]thiazolo[3,2-a]pyridine-3,7-dicarboxylic acid) synthesis, fluorophore polymerization, carbon chain extension, and carbonization. It was also discovered that these two CDs have the same fluorescence properties, thiazolopyridone structure, and nitrogen-sulfur co-doped functional groups are important reasons for the mixed excitation dependence of CDs. This study would provide valuable theoretical basis for the studies on preparation of excellent CDs, raw material selection, and CDs formation mechanism.

N-gene-complementary antisense-oligonucleotide directed molecular aggregation of dual-colour carbon dots, leading to efficient fluorometric sensing of SARS-COV-2 RNA

The early stages of the COVID-19 pandemic punctuated the need for rapid, mass testing for early detection of viral infection. Carbon dots are easily synthesized, cost-effective fluorescent nanoparticles whose surface functionalities enable facile conjugation with biorecognition elements suitable for  molecular detection of viral RNA. Herein, we report that a pair of complementary antisense oligonucleotide (ASO) sequences can lead to a highly specific molecular aggregation of dual colour carbon dots (CDs) in the presence of SARS-CoV-2 RNA. The nanoprobes used ASOs highly specific to the N-gene of SARS-COV-2. When the ASOs are conjugated to blue and yellow citric acid-derived CDs, the combination of the ASO-CD pairs facilitates aggregation-induced emission enhancement (AIEE) of the measured fluorescence after hybridization with SARS-CoV-2 RNA. We found the sensor capable of differentiating between MERS-CoV and SARS-CoV-2 samples and was found to have a limit of detection of 81 copies per μL. Additionally, we used dialysis to demonstrate that the change in emission upon aggregation is dependent on the compositional heterogeneity of the conjugated-carbon dot mixture.

One-Pot Green Preparation of Fluorescent Cellulose Nanofibers

Fluorescent cellulose nanofibers (FCNFs), with a high yield, were prepared via one-pot hydrolysis and the grafting reaction of cellulose with thiazolipyridine carboxylic acid (TPCA). The hydrolysis and Fischer esterification of cellulose were conducted under microwave-hydrothermal conditions; meanwhile, TPCA formation was induced by the dehydration reaction between L-cysteine and citric acid. The effects of the reaction temperature and reaction time on the yield and performance of FCNF were investigated. The morphology and size, surface chemical property, crystal structure, thermostability, and fluorescent performance of FCNF were characterized. The results revealed that the yield of FCNF reached 73.2% under a microwave power of 500 W, reaction temperature of 110 °C, and reaction time of 5 h. The FCNF obtained presents a short rod-like morphology. The crystallinity of the FCNFs is 80%, and their thermal stability did not decline significantly. Additionally, the fluorescent performance of the FCNFs is excellent, which results in them having good sensitivity to chloride ions. The good fluorescent performance and significant responsiveness to chloride ions of FCNFs lead to them having broad prospects in bio-labeling, biosensing, information storage, chloride ion detection, among others.

Simultaneous Detection of Bladder Cancer Exosomal MicroRNAs Based on Inorganic Nanoflare and DNAzyme Walker

Bladder cancer (BC) is one of the most common cancers in the world, with high morbidity and mortality. It is essential to develop a non-invasive, highly accurate, and simple method for BC diagnosis. This work proposed a fluorescent biosensor based on inorganic nanoflares combined with a DNAzyme walker for the simultaneous detection of BC exosomal microRNAs (miRNAs). This biosensor was constructed on the Au nanoparticle (AuNP) modified with the carbon dot (CD)-labeled substrates and DNAzyme strands (AuNP@CDs inorganic nanoflares-DNAzyme, APCD). In the presence of target miRNAs, DNAzyme was activated and then cleaved the CD-labeled substrates and automatically walked along the AuNP, allowing fluorescence recovery. Due to the structure and functional composition, the APCD biosensors demonstrated high sensitivity and specificity, with the reached limit of detection for a single miRNA at the femtomolar level and wide linear range from 50 fM to 10 nM. Furthermore, the simultaneous analysis of BC-related exosomal miR-133b and miR-135b in clinical serum specimens was achieved and consistent with qRT-PCR, suggesting it is a potential method for the diagnosis of BC and other cancers.

Structural and spectroscopic characterization of pyrene derived carbon nano dots: a single-particle level analysis

The bottom-up approach has been widely used for large-scale synthesis of carbon nanodots (CNDs). However, the structure and origin of photoluminescence in CNDs synthesized by the bottom-up approach is still a subject of debate. Here, using a series of separation techniques like solvent extraction, column chromatography, gel electrophoresis and dialysis, we present three distinct fluorescent components in CNDs synthesized from pyrene, a well-known precursor molecule. The separated components have qualitative and quantitatively different absorption and emission spectral features including quantum yield (QY). Optical and vibrational spectroscopy techniques combined with electron microscopy indicate that a subtle balance between the extent of graphitization and the presence of molecular fluorophores determines the nature of fluorescence emission. A substantial difference in photons/cycle, single-particle fluorescence blinking, ON-OFF photoswitching strongly supports the distinct nature of the components.

Towards N-N-Doped Carbon Dots: A Combined Computational and Experimental Investigation

The introduction of N doping atoms in the carbon network of Carbon Dots is known to increase their quantum yield and broaden the emission spectrum, depending on the kind of N bonding introduced. N doping is usually achieved by exploiting amine molecules in the synthesis. In this work, we studied the possibility of introducing a N-N bonding in the carbon network by means of hydrothermal synthesis of citric acid and hydrazine molecules, including hydrated hydrazine, di-methylhydrazine and phenylhydrazine. The experimental optical features show the typical fingerprints of Carbon Dots formation, such as nanometric size, excitation dependent emission, non-single exponential decay of photoluminescence and G and D vibrational bands in the Raman spectra. To explain the reported data, we performed a detailed computational investigation of the possible products of the synthesis, comparing the simulated absorbance spectra with the experimental optical excitation pattern. The computed Raman spectra corroborate the hypothesis of the formation of pyridinone derivatives, among which the formation of small polymeric chains allowed the broad excitation spectra to be experimentally observed.

Dual Fluorescence in Glutathione-Derived Carbon Dots Revisited

Dual-fluorescence carbon dots have great potential as nanosensors in life and materials sciences. Such carbon dots can be obtained via a solvothermal synthesis route with glutathione and formamide. In this work, we show that the dual-fluorescence emission of the synthesis products does not originate from a single carbon dot emitter, but rather from a mixture of physically separate compounds. We characterized the synthesis products with UV-vis, Raman, infrared, and fluorescence spectroscopy, and identified blue-emissive carbon dots and red-emissive porphyrin. We demonstrate an easy way to separate the two compounds without the need for time-consuming dialysis. Understanding the nature of the system, we can now steer the synthesis toward the desired product, which paves the way for a cheap and environmentally friendly synthesis route toward carbon dots, water-soluble porphyrin, and mixed systems.

Applications of Carbon Dots for the Photocatalytic and Electrocatalytic Reduction of CO2

The photocatalytic and electrocatalytic conversion of CO2 has the potential to provide valuable products, such as chemicals or fuels of interest, at low cost while maintaining a circular carbon cycle. In this context, carbon dots possess optical and electrochemical properties that make them suitable candidates to participate in the reaction, either as a single component or forming part of more elaborate catalytic systems. In this review, we describe several strategies where the carbon dots participate, both with amorphous and graphitic structures, in the photocatalysis or electrochemical catalysis of CO2 to provide different carbon-containing products of interest. The role of the carbon dots is analyzed as a function of their redox and light absorption characteristics and their complementarity with other known catalytic systems. Moreover, detailed information about synthetic procedures is also reviewed.

Developing electropositive citric acid–polyethylenimine carbon quantum dots with high biocompatibility and labeling performance for mesenchymal stem cells in vitro and in vivo

The positive CQD has good biocompatibility (≤800 μg mL−1) and labelling performance for mesenchymal stem cell in vitro and in vivo.

Carbon Nanodots for All-in-One Photocatalytic Hydrogen Generation

Carbon nanodots (CNDs) were photochemically altered to produce dihydrogen under light irradiation. Within the complex structure of CNDs, photo-oxidation takes place at citrazinic acid molecular fluorophore sites. Important is the fact that the resulting CND materials have a dual function. On one hand, they absorb light, and on the other hand, they photo- and electrocatalytically produce dihydrogen from water and seawater, without any external photosensitizer or cocatalyst. Record HER activities of 15.15 and 19.70 mmol(H₂) g(catalyst)^-1 h^-1 were obtained after 1 h of 75 mW/cm² Xe lamp illumination, from water and seawater, respectively. This impressive performance outweighs the remaining structural uncertainties. A full-fledged physicochemical investigation based on an arsenal of steady-state and time-resolved spectroscopic characterizations together with microscopy enabled a comprehensive look into the reaction mechanism. For an efficient dihydrogen formation, a precatalytic activation by means of reduction with a sacrificial electron donor is imperative.