Cu2(OH)3NO3 nanozyme sensor array for the discrimination of multiple sulfides in food

In the food industry, sulfides are commonly used as preservatives and flavor regulators. However, long-term excessive intake of sulfides can lead to serious health problems. Therefore, developing efficient sulfide detection methods is particularly important. Here, we have effectively synthesized a novel bifunctional copper hydroxide nitrate (Cu2(OH)3NO3) nanozyme with outstanding peroxidase-like and laccase-like behaviors in basic deep eutectic solvents (DES). Because the various types of sulfides have diverse regulatory effects on the two catalytic behaviors of Cu2(OH)3NO3, a two channel nanozyme sensor array based on the peroxidase-like and laccase-like behaviors of Cu2(OH)3NO3 was constructed and successfully used for the identification of six kinds of sulfides (Na2S, Na2S2O3, Na2SO3, Na2SO4, NaHSO3, and Na2S2O8). Remarkably, the sensor array has achieved successful discrimination among six sulfides present in wine, egg, and milk samples. Finally, the sensor array has successfully distinguished and differentiated three actual samples (wine, egg, and milk). This study is of great significance in promoting the efficient construction of array units and improving the effective identification of sulfides in complex food samples.

Bioinspired Dual Hemin-Bonded G-Quadruplex and Histidine-Functionalized Metal-Organic Framework for Sensitive Biosensing

Biomimetic enzymes have emerged as ideal alternatives to natural enzymes, and there is considerable interest in designing biomimetic enzymes with enhanced catalytic performance to address the low activity of the current biomimetic enzymes. In this study, we proposed a meaningful strategy for constructing an efficient peroxidase-mimicking catalyst, called HhG-MOF, by anchoring histidine (H) and dual hemin-G-quadruplex DNAzyme (double hemin covalently linked to 3' and 5' terminals of G-quadruplex DNA, short as hG) to a mesoporous metal-organic framework (MOF). This design aims to mimic the microenvironment of natural peroxidase. Remarkably, taking a terbium MOF as a typical model, the initial rate of the resulting catalyst was found to be 21.1 and 4.3 times higher than that of Hh-MOF and hG-MOF, respectively. The exceptional catalytic properties of HhG-MOF can be attributed to its strong affinity for substrates. Based on the inhibitory effect of thiocholine (TCh) produced by the reaction between acetylcholinesterase (AChE) and acetylthiocholine, a facile, cost-effective, and sensitive colorimetric method was designed based on HhG-MOF for the measurement of AChE, a marker of several neurological diseases, and its inhibitor. This allowed a linear response in the 0.002 to 1 U L-1 range, with a detection limit of 0.001 U L-1. Furthermore, the prepared sensor demonstrated great selectivity and performed well in real blood samples, suggesting that it holds promise for applications in the clinical field.

Breaking the pH Limitation of Nanozymes: Mechanisms, Methods, and Applications

Although nanozymes have drawn great attention over the past decade, the activities of peroxidase-like, oxidase-like, and catalase-like nanozymes are often pH dependent with elusive mechanism, which largely restricts their application. Therefore, a systematical discussion on the pH-related catalytic mechanisms of nanozymes together with the methods to overcome this limitation is in need. In this review, various nanozymes exhibiting pH-dependent catalytic activities are collected and the root causes for their pH dependence are comprehensively analyzed. Subsequently, regulatory concepts including catalytic environment reconstruction and direct catalytic activity improvement to break this pH restriction are summarized. Moreover, applications of pH-independent nanozymes in sensing, disease therapy, and pollutant degradation are overviewed. Finally, current challenges and future opportunities on the development of pH-independent nanozymes are suggested. It is anticipated that this review will promote the further design of pH-independent nanozymes and broaden their application range with higher efficiency.

On-demand activatable peroxidase-mimicking enzymatic polymer nanocomposite films

Nanozymes continue to attract considerable attention to minimise the dependence on expensive enzymes in bioassays, particularly in medical diagnostics. While there has been considerable effort directed towards developing different nanozymes, there has been limited progress in fabricating composite materials based on such nanozymes. One of the biggest gaps in the field is the control, tuneability, and on-demand catalytic response. Herein, a nanocomposite nanozymatic film that enables precise tuning of catalytic activity through stretching is demonstrated. In a systematic study, we developed poly(styrene-stat-n-butyl acrylate)/iron oxide-embedded porous silica nanoparticle (FeSiNP) nanocomposite films with controlled, highly tuneable, and on-demand activatable peroxidase-like activity. The polymer/FeSiNP nanocomposite was designed to undergo film formation at ambient temperature yielding a highly flexible and stretchable film, responsible for enabling precise control over the peroxidase-like activity. The fabricated nanocomposite films exhibited a prolonged FeSiNP dose-dependent catalytic response. Interestingly, the optimised composite films with 10 wt% FeSiNP exhibited a drastic change in the enzymatic activity upon stretching, which provides the nanocomposite films with an on-demand performance activation characteristic. This is the first report showing control over the nanozyme activity using a nanocomposite film, which is expected to pave the way for further research in the field leading to the development of system-embedded activatable sensors for diagnostic, food spoilage, and environmental applications.

Nanozymes for biomedical applications: Multi-metallic systems may improve activity but at the cost of higher toxicity?

Nanozymes are nanomaterials with intrinsic enzyme-like activity with selected advantages over native enzymes such as simple synthesis, controllable activity, high stability, and low cost. These materials have been explored as surrogates to natural enzymes in biosensing, therapeutics, environmental protection, and many other fields. Among different nanozymes classes, metal- and metal oxide-based nanozymes are the most widely studied. In recent years, bi- and tri-metallic nanomaterials have emerged often showing improved nanozyme activity, some of which even possess multifunctional enzyme-like activity. Taking this concept even further, high-entropy nanomaterials, that is, complex multicomponent alloys and ceramics like oxides, may potentially enhance activity even further. However, the addition of various elements to increase catalytic activity may come at the cost of increased toxicity. Since many nanozyme compositions are currently being explored for in vivo biomedical applications, such as cancer therapeutics, toxicity considerations in relation to nanozyme application in biomedicine are of vital importance for translation. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Toxicology and Regulatory Issues in Nanomedicine > Toxicology of Nanomaterials Diagnostic Tools > Diagnostic Nanodevices.

Effects of foliar iron oxide nanoparticles (Fe3O4) application on photosynthetic parameters, distribution of mineral elements, magnetic behaviour, and photosynthetic genes in tomato (Solanum lycopersicum var. cerasiforme) plants

This study aims to examine the effect of foliar magnetic iron oxide (Fe3O4) nanoparticles (IONP) application on the physiology, photosynthetic parameters, magnetic character, and mineral element distribution of cherry tomatoes (Solanum lycopersicum var. cerasiforme). The IONP suspension (500 mg L-1) was sprayed once (S1), twice (S2), thrice (S3), and four times (S4) a week on seedlings. Upon 21 days of the treatments, photosynthetic parameters (chlorophyll, carotenoids, photosynthetic yield, electron transport rate) were elucidated. Inductively-coupled plasma-optical emission spectrometer (ICP-OES) and vibrating sample magnetometer (VSM) were used to determine the mineral elements and abundance of magnetic power in the seedlings. In addition, the RT-qPCR method was performed to quantify the expressions of photosystem-related (PsaC, PsbP6, and PsbQ) and ferritin-coding (Fer-1 and Fer-2) genes. Results revealed that the physiological and photosynthetic indices were improved upon S1 treatment. The optimal dosage of IONP spraying enhances chlorophyll, carotenoid, electron transport rate (ETR), and effective photochemical quantum yield of photosystem II (Y(II)) but substantially diminishes non-photochemical quenching (NPQ). However, frequent IONP applications (S2, S3, and S4) caused growth retardation and suppressed the photosynthetic parameters, suggesting a toxic effect of IONP in recurrent treatments. Fer-1 and Fer-2 expressions were strikingly increased by IONP applications, suggesting an attempt to neutralize the excess amount of Fe ions by ferritin. Nevertheless, frequent IONP treatment fluctuated the mineral distribution and caused growth inhibition. Although low-repeat foliar applications of IONP (S1 in this study) may help improve plant growth, consecutive applications (S2, S3, and S4) should be avoided.

Reusable Colorimetric Biosensors on Sustainable Silk-Based Platforms

In biosensor development, silk fibroin is advantageous for providing transparent, flexible, chemically/mechanically stable, biocompatible, and sustainable substrates, where the biorecognition element remains functional for long time periods. These properties are employed here in the production of point-of-care biosensors for resource-limited regions, which are able to display glucose levels without the need for external instrumentation. These biosensors are produced by photopatterning silk films doped with the enzymes glucose oxidase and peroxidase and photoelectrochromic molecules from the dithienylethene family acting as colorimetric mediators of the enzymatic reaction. The photopatterning results from the photoisomerization of dithienylethene molecules in the silk film from its initial uncolored opened form to its pink closed one. The photoisomerization is dose-dependent, and colored patterns with increasing color intensities are obtained by increasing either the irradiation time or the light intensity. In the presence of glucose, the enzymatic cascade reaction is activated, and peroxidase selectively returns closed dithienylethene molecules to their initial uncolored state. Color disappearance in the silk film is proportional to glucose concentration and used to distinguish between hypoglycemic (below 4 mM), normoglycemic (4-6 mM), and hyperglycemic levels (above 6 mM) by visual inspection. After the measurement, the biosensor can be regenerated by irradiation with UV light, enabling up to five measurement cycles. The coupling of peroxidase activity to other oxidoreductases opens the possibility to produce long-life reusable smart biosensors for other analytes such as lactate, cholesterol, or ethanol.

Designing M13 Bacteriophage and Fe-Nanonest Self-Assembly System for Universal and Facile Preparation of Metal Single Atoms as Stable Mimicking Enzymes

Metal single-atom catalysts (MSACs) possess multiple advantages in chemical synthesis; their efficient fabrication routes, however, remain a challenge to date. Here, an interdisciplinary design using M13 bacteriophage virus as a biotemplate to carry Fe nanoclusters, which we figuratively call "Fe-nanonests", is proposed to enable facile and versatile synthesis of MSACs. The feasibility and generality of this self-assembly method was demonstrated by the observation of six different metal single atoms (MSAs) including Ag, Pt, Pd, Zn, Cu, and Ni. With Pd as a representative, key factors dominating the fabrication were determined. The Pd single atoms exhibited excellent horseradish peroxidase (HRP)-like activity, which was further improved by 50% via genetic editing of the M13 pVIII protein terminals. Excellent stability was also observed in the quantification of acid phosphatase, a cancer predictor. X-ray absorption near-edge structure spectroscopy has been applied to the analysis of Pd single atoms as well, and the Pd-N4 coordination explained the mechanism of high HRP-like catalytic activity. The MSAs synthesized by the M13 phage and Fe-nanonest self-assembly method show promising prospects in non-cold-chain medical detection applications.

Synergistically Enhanced Oxidase-like Property of Core-Shell MOF Nanozymes by Decorating Au and Ag/AgCl Nanoparticles for l-Cysteine Colorimetric Sensing

Monitoring l-cysteine (l-Cys) is of importance for human health and food safety. Herein, we designed a novel strategy for bimetallic Au and Ag/AgCl anchoring on Ni-doped ZIF-67 to form core-shell nanocubes (Ni-ZIF-67/AuAg/AgCl) using the galvanic replacement processes. The unique properties of ZIF-67 nanocubes were conducive to generating strong synergistic catalytic effects with Au and Ag/AgCl, particularly when Ni-ZIF-67/AuAg/AgCl composites were employed as oxidase mimics for catalyzing the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB). The Ni-ZIF-67/AuAg/AgCl composites displayed strong affinity toward TMB, displaying a lower Michaelis constant Km value of 0.25 mM and a higher maximum initial rate Vmax of 9 × 10-8 M s-1. By virtue of the nanozyme, the colorimetric sensor was constructed for l-Cys detection with a relatively low detection limit of 0.051 μM. The superior catalytic performance of the as-prepared Ni-ZIF-67/AuAg/AgCl composites can be ascribed to the core-shell structure, large specific surface area, and strong synergistic catalytic effects, which are beneficial for exposing more active sites and enhancing the conductivity to further boost their catalytic activity.

Single-atom nanozymes: classification, regulation strategy, and safety concerns

Nanozymes, nanomaterials possessing enzymatic activity, have been studied extensively by researchers. However, their complex composition, low density of active sites, and inadequate substrate selectivity have hindered the maturation and widespread acceptance of nanozymes. Single-atom nanozymes (SAzymes) with atomically dispersed active sites are leading the field of catalysis due to their exceptional performance. The maximum utilization rate of atoms, low cost, well-defined coordination structure, and active sites are the most prominent advantages of SAzymes that researchers favor. This review systematically categorizes SAzymes based on their support type and describes their specific applications. Additionally, we discuss regulation strategies for SAzyme activity and provide a comprehensive summary of biosafety challenges associated with these enzymes.

Facile Fabrication of Wood-Derived Porous Fe3C/Nitrogen-Doped Carbon Membrane for Colorimetric Sensing of Ascorbic Acid

Fe3C nanoparticles hold promise as catalysts and nanozymes, but their low activity and complex preparation have hindered their use. Herein, this study presents a synthetic alternative toward efficient, durable, and recyclable, Fe3C-nanoparticle-encapsulated nitrogen-doped hierarchically porous carbon membranes (Fe3C/N-C). By employing a simple one-step synthetic method, we utilized wood as a renewable and environmentally friendly carbon precursor, coupled with poly(ionic liquids) as a nitrogen and iron source. This innovative strategy offers sustainable, high-performance catalysts with improved stability and reusability. The Fe3C/N-C exhibits an outstanding peroxidase-like catalytic activity toward the oxidation of 3,3',5,5'-tetramethylbenzidine in the presence of hydrogen peroxide, which stems from well-dispersed, small Fe3C nanoparticles jointly with the structurally unique micro-/macroporous N-C membrane. Owing to the remarkable catalytic activity for mimicking peroxidase, an efficient and sensitive colorimetric method for detecting ascorbic acid over a broad concentration range with a low limit of detection (~2.64 µM), as well as superior selectivity, and anti-interference capability has been developed. This study offers a widely adaptable and sustainable way to synthesize an Fe3C/N-C membrane as an easy-to-handle, convenient, and recoverable biomimetic enzyme with excellent catalytic performance, providing a convenient and sensitive colorimetric technique for potential applications in medicine, biosensing, and environmental fields.

MXene-based nanomaterials with enzyme-like properties for biomedical applications

Recently, great progress has been made in nanozyme research due to the rapid development of nanomaterials and nanotechnology. MXene-based nanomaterials have gained considerable attention owing to their unique physicochemical properties. They have been found to have high enzyme-like properties, such as peroxidase, oxidase, catalase, and superoxide dismutase. In this mini-review, we present an overview of the recent progress in MXene-based nanozymes, with emphasis on their synthetic methods, hybridization, bio-catalytic properties, and biomedical applications. The future challenges and prospects of MXene-based nanozymes are also proposed.

Size dependence of the surface spin disorder and surface anisotropy constant in ferrite nanoparticles

The magnetic properties of nanoscale magnets are greatly influenced by surface anisotropy. So far, its quantification is based on the examination of the blocking temperature shift within a series of nanoparticles of varying sizes. In this scenario, the surface anisotropy is assumed to be a particle size-independent quantity. However, there is no solid experimental proof to support this simplified picture. On the contrary, our work unravels the size-dependent magnetic morphology and surface anisotropy in highly uniform magnetic nanoparticles using small-angle polarized neutron scattering. We observed that the surface anisotropy constant does not depend on the nanoparticle's size in the range of 3-9 nm. Furthermore, our results demonstrate that the surface spins are less prone to polarization with increasing nanoparticle size. Our study thus proves the size dependence of the surface spin disorder and the surface anisotropy constant in fine nanomagnets. These findings open new routes in materials based on a controlled surface spin disorder, which is essential for future applications of nanomagnets in biomedicine and magnonics.

DNA-Encoded Bidirectional Regulation of the Peroxidase Activity of Pt Nanozymes for Bioanalysis

Rational regulation of nanozyme activity can promote biochemical sensing by expanding sensing strategies and improving sensing performance, but the design of effective regulatory strategies remains a challenge. Herein, a rapid DNA-encoded strategy was developed for the efficient regulation of Pt nanozyme activity. Interestingly, we found that the catalytic activity of Pt nanozymes was sequence-dependent, and its peroxidase activity was significantly enhanced only in the presence of T-rich sequences. Thus, different DNA sequences realized bidirectional regulation of Pt nanozyme peroxidase activity. Furthermore, the DNA-encoded strategy can effectively enhance the stability of Pt nanozymes at high temperatures, freezing, and long-term storage. Meanwhile, a series of studies demonstrated that the presence of DNA influenced the reduction degree of H₂PtCl₆ precursors, which in turn affected the peroxidase activity of Pt nanozymes. As a proof of application, the sensor array based on the Pt nanozyme system showed superior performance in the accurate discrimination of antioxidants. This study obtained the regulation rules of DNA on Pt nanozymes, which provided theoretical guidance for the development of new sensing platforms and new ideas for the regulation of other nanozyme activities.

Label-Free Detection of Epinephrine Using Flower-like Biomimetic CuS Antioxidant Nanozymes

A biosensor comprising crystalline CuS nanoparticles (NPs) was synthesized via a one-step simple coprecipitation route without involvement of a surfactant. The powder X-ray diffraction method has been used to evaluate the crystalline nature and different phases consist of the formation of CuS NPs. Mainly hexagonal unit cells consist of the formation of CuS NP unit cells. Most of the surfaces are covered with rhombohedral microparticles with a smooth exterior and surface clustering, examined by SEM images, and the shape of NPs was spherical, having an average size of 23 nm, as confirmed by TEM analysis. This study has focused on the peroxidase-mimicking activity, superoxide dismutase (SOD)-mimicking activity, and chemosensor-based colorimetric determination and detection of epinephrine (EP) neurotransmitters with excellent selectivity. The CuS NPs catalyzed the oxidation of the oxidase substrate 3, 3-5, 5 tetramethyl benzidine (TMB) with the help of supplementary H2O2 that followed Michaelis-Menten kinetics with excellent Km and Vmax values calculated by the Lineweaver-Burk plot. Taking advantage of the drop in absorbance upon introduction of EP for the CuS NPs-TMB/H2O2 system, a colorimetric route has been developed for selective and real-time detection of EP. The sensitivity of the new colorimetric probe was vibrant, having a linear range of 0-16 μM, and achieved a low limit of detection of 457 nM. Moreover, the present nanosystem exhibited appreciable SOD-mimicking activity which could effectively remove O2•- from commercial cigarette smoke, along with it acting as a potential radical scavenger as well. The new nanosystem effectively scavenged •OH, O2.-, and metal chelation which were investigated calorimetrically.

Ultrafast colorimetric detection of Cr(VI) using Fe3O4@polydopamine/Prussian blue composites as a highly efficient peroxidase mimic

A recyclable peroxidase mimic Fe₃O₄@polydopamine/Prussian blue (Fe₃O₄@PDA/PB) composite was facilely prepared by coating PDA on an Fe₃O₄ nanoparticle core and in situ growth of PB nanoparticles on a PDA shell. The prepared Fe₃O₄@PDA/PB composite exhibited excellent peroxidase-like activity and can catalytically oxidize the colorless colorimetric substrate 3,3',5,5'-tetramethylbenzidine (TMB) into a blue colored product in the presence of H₂O₂ at 30 °C in 1 min. The catalytic mechanism was deduced to be the nanozyme-promoted generation of a hydroxyl radical (·OH), and the catalytic behavior followed the typical Michaelis-Menten kinetics. Based on Cr(VI)-boosted peroxidase-like activity of Fe₃O₄@PDA/PB, a simple and fast colorimetric method for detection of Cr(VI) was developed. Under the optimum conditions, the colorimetric method exhibited wider linear range (100 nM to 140 μM), low LOD (51.1 nM), good selectivity and short detection time (1 min). Moreover, the feasibility of the proposed colorimetric method was evaluated by determination of Cr(VI) in spiked tap water and lake water samples. Good recoveries (95.2-102.9%) and low relative standard deviations (RSDs) (1.6-4.4%) were obtained, showing great promise for practical use.

Plasmonic/magnetic nanoarchitectures: From controllable design to biosensing and bioelectronic interfaces

Controllable design of the nanocrystal-assembled plasmonic/magnetic nanoarchitectures (P/MNAs) inspires abundant methodologies to enhance light-matter interactions and control magnetic-induced effects by means of fine-tuning the morphology and ordered packing of noble metallic or magnetic building blocks. The burgeoning development of multifunctional nanoarchitectures has opened up broad range of interdisciplinary applications including biosensing, in vitro diagnostic devices, point-of-care (POC) platforms, and soft bioelectronics. By taking advantage of their customizability and efficient conjugation with capping biomolecules, various nanoarchitectures have been integrated into high-performance biosensors with remarkable sensitivity and versatility, enabling key features that combined multiplexed detection, ease-of-use and miniaturization. In this review, we provide an overview of the representative developments of nanoarchitectures that being built by plasmonic and magnetic nanoparticles over recent decades. The design principles and key mechanisms for signal amplification and quantitative sensitivity have been explored. We highlight the structure-function programmability and prospects of addressing the main limitations for conventional biosensing strategies in terms of accurate selectivity, sensitivity, throughput, and optoelectronic integration. State-of-the-art strategies to achieve affordable and field-deployable POC devices for early multiplexed detection of infectious diseases such as COVID-19 has been covered in this review. Finally, we discuss the urgent yet challenging issues in nanoarchitectures design and related biosensing application, such as large-scale fabrication and integration with portable devices, and provide perspectives and suggestions on developing smart biosensors that connecting the materials science and biomedical engineering for personal health monitoring.

Highly Sensitive Colorimetric Detection of Glutathione in Human Serum Based on Iron-Copper Metal-Organic Frameworks

Emerging metal-organic framework (MOF)-based mimic enzymes have been exploited to design a colorimetric sensor for the detection of biomolecules. However, it is challenging to figure out the glutathione (GSH) detection method and the corresponding sensing mechanism using an MOF-based colorimetric sensor. In this work, a novel iron-copper MOF with high activity is synthesized by a wet-chemical method. A GSH colorimetric sensor based on the peroxidase-like properties of the iron-copper MOF is developed. Hydrogen peroxide is converted to hydroxyl radicals by the peroxidase-like properties of the iron-copper MOF mimic enzyme, which can catalyze the colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxidized TMB (ox-TMB). The kinetic constant of the MOF mimic enzyme (0.02 mM for H₂O₂) is superior to horseradish peroxidase (HRP). The GSH content can be quantified by proposing a sensor based on the colorimetric method and color turn-off mechanism. The turn-off mechanism of GSH analysis includes two aspects. On the one hand, the blue ox-TMB can be deoxidized to colorless TMB by GSH. On the other hand, hydroxyl radicals (^•OH) can be consumed by GSH. The linear range and limit of detection are 2-20 and 0.439 μM, respectively. At the same time, GSH detection also shows good specificity and anti-interference characteristics. Therefore, MOF-based colorimetric sensors have been used to qualitatively and quantitatively measure GSH contents in human serum. The mechanism and application of the iron-copper MOF pave a way for the development of mimic enzymes with polymetallic active sites in the field of colorimetric sensing.

Oxidase-like ZnCoFe Three-Atom Nanozyme as a Colorimetric Platform for Ascorbic Acid Sensing

Great enthusiasm in single-atom catalysts for various catalytic reactions continues to heat up. However, the poor activity of the existing single/dual-metal-atom catalysts does not meet the actual requirement. In this scenario, the precise design of triple-metal-atom catalysts is vital but still challenging. Here, a triple-atom site catalyst of FeCoZn catalyst coordinated with S and N, which is doped in the carbon matrix (named FeCoZn-TAC/SNC), is designed. The FeCoZn catalyst can mimic the activity of oxidase by activating O₂ into ^•O₂^- radicals by virtue of its atomically dispersed metal active sites. Employing this characteristic, triple-atom catalysts can become a great driving force for the development of novel biosensors featuring adequate sensitivity. First, the property of FeCoZn catalyst as an oxidase-like nanozyme was explored. The obtained FeCoZn-TAC/SNC shows remarkably enhanced catalytic performance than that of FeCoZn-TAC/NC and single/dual-atom site catalysts (FeZn, CoZn, FeCo-DAC/NC and Fe, Zn, Co-SAC/NC) because of trimetallic sites, demonstrating the synergistic effect. Further, the utility of the oxidase-like FeCoZn-TAC/SNC in biosensor field is evaluated by the colorimetric sensing of ascorbic acid. The nanozyme sensor shows a wide concentration range from 0.01 to 90 μM and an excellent detection limit of 6.24 nM. The applicability of the nanozyme sensor in biologically relevant detection was further proved in serum. The implementation of TAC in colorimetric detection holds vast promise for further development of biomedical research and clinical diagnosis.

Recent Advances in Construction and Application of Metal-Nanozymes in Pharmaceutical Analysis

Nanozymes, made of emerging nanomaterials, have similar activity to natural enzyme and exhibit promising applications in in the fields of environment, biology and medicine, and food safety science. In recent years, with the deep finding and research to nanozymes by researchers, its application in field of pharmaceutical analysis has emerged gradually, possessing great significance in drug safety evaluation and quality control. This review summarizes the construction of metal nanozymes, strategies to improve their performance and their application in pharmaceutical detection and analysis, especially in detection of target analytes consisting of small molecule medicine macromolecule, toxic and others, which proposes theoretical foundation for development of nanozymes in this field. At the same time, it also provides opportunities and challenges for the construction and application of new nanozymes.

Depletable peroxidase-like activity of Fe3O4 nanozymes accompanied with separate migration of electrons and iron ions

As pioneering Fe₃O₄ nanozymes, their explicit peroxidase (POD)-like catalytic mechanism remains elusive. Although many studies have proposed surface Fe²⁺-induced Fenton-like reactions accounting for their POD-like activity, few have focused on the internal atomic changes and their contribution to the catalytic reaction. Here we report that Fe²⁺ within Fe₃O₄ can transfer electrons to the surface via the Fe²⁺-O-Fe³⁺ chain, regenerating the surface Fe²⁺ and enabling a sustained POD-like catalytic reaction. This process usually occurs with the outward migration of excess oxidized Fe³⁺ from the lattice, which is a rate-limiting step. After prolonged catalysis, Fe₃O₄ nanozymes suffer the phase transformation to γ-Fe₂O₃ with depletable POD-like activity. This self-depleting characteristic of nanozymes with internal atoms involved in electron transfer and ion migration is well validated on lithium iron phosphate nanoparticles. We reveal a neglected issue concerning the necessity of considering both surface and internal atoms when designing, modulating, and applying nanozymes.

The mechanism of peroxidase-like Fe₃O₄ nanozymes remains elusive. Here, the authors show the electron transfer mechanism of Fe(II) ions to regenerate surface Fe(II) and the related phase transformation and depletion of activity.

Hydrogel Nanoarchitectonics: An Evolving Paradigm for Ultrasensitive Biosensing

The integration of nanoarchitectonics and hydrogel into conventional biosensing platforms offers the opportunities to design physically and chemically controlled and optimized soft structures with superior biocompatibility, better immobilization of biomolecules, and specific and sensitive biosensor design. The physical and chemical properties of 3D hydrogel structures can be modified by integrating with nanostructures. Such modifications can enhance their responsiveness to mechanical, optical, thermal, magnetic, and electric stimuli, which in turn can enhance the practicality of biosensors in clinical settings. This review describes the synthesis and kinetics of gel networks and exploitation of nanostructure-integrated hydrogels in biosensing. With an emphasis on different integration strategies of hydrogel with nanostructures, this review highlights the importance of hydrogel nanostructures as one of the most favorable candidates for developing ultrasensitive biosensors. Moreover, hydrogel nanoarchitectonics are also portrayed as a promising candidate for fabricating next-generation robust biosensors.

Glutamate Oxidase-Integrated Biomimetic Metal-Organic Framework Hybrids as Cascade Nanozymes for Ultrasensitive Glutamate Detection

The hybrid coupling of biocatalysts and chemical catalysts plays a vital role in the fields of catalysis, sensing, and medical treatment due to the integrated advantages in the high activity of natural enzymes and the excellent stability of nanozymes. Herein, a new nanozyme/natural enzyme hybrid biosensor was established for ultrasensitive glutamate detection. The MIL-88B(Fe)-NH₂ material with remarkable peroxidase mimic activity and stability was used as a nanozyme and carrier for immobilizing glutamate oxidase (GLOX) through Schiff base reaction to construct a chem-enzyme cascade detector (MIL-88B(Fe)-NH₂@GLOX). The resultant MIL-88B(Fe)-NH₂@GLOX exhibited a wide linear range (1-100 μM), with a low detection limit of 2.5 μM for glutamate detection. Furthermore, the MIL-88B(Fe)-NH₂@GLOX displayed excellent reusability and storage stability. After repeated seven cycles, MIL-88B(Fe)-NH₂-GLOX (GLOX was adsorbed on MIL-88B(Fe)-NH₂) lost most of its activity, whereas MIL-88B(Fe)-NH₂@GLOX still retained 69% of its initial activity. Meanwhile, MIL-88B(Fe)-NH₂@GLOX maintained 60% of its initial activity after storage for 90 days, while free GLOX only retained 30% of its initial activity. This strategy of integrating MOF mimics and natural enzymes for cascade catalysis makes it possible to design an efficient and stable chemo-enzyme composite catalysts, which are promising for applications in biosensing and biomimetic catalysis.

DiZyme: Open-Access Expandable Resource for Quantitative Prediction of Nanozyme Catalytic Activity

Enzymes suffer from high cost, complex purification, and low stability. Development of low-cost artificial enzymes of comparative or higher effectiveness is desired. Given its complexity, it is desired to presume their activities prior to experiments. While computational approaches demonstrate success in modeling nanozyme activities, they require assumptions about the system to be made. Machine learning (ML) is an alternative approach towards data-driven material property prediction achieving high performance even on multicomponent complex systems. Despite the growing demand for customized nanozymes, there is no open access nanozyme database. Here, a user-friendly expandable database of >300 existing inorganic nanozymes is developed by data collection from >100 articles. Data analysis is performed to reveal the features responsible for catalytic activities of nanozymes, and new descriptors are proposed for its ML-assisted prediction. A random forest regression (RFR) model for evaluation of nanozyme peroxidase activity is developed and optimized by correlation-based feature selection and hyperparameter tuning, achieving performance up to R²  = 0.796 for K_cat and R²  = 0.627 for K_m . Experiment-confirmed unknown nanozyme activity prediction is also demonstrated. Moreover, the DiZyme expandable, open-access resource containing the database, predictive algorithm, and visualization tool is developed to boost novel nanozyme discovery worldwide (https://dizyme.net).

Perspective for Single Atom Nanozymes Based Sensors: Advanced Materials, Sensing Mechanism, Selectivity Regulation, and Applications

Nanozymes are a kind of nanomaterial mimicking enzyme catalytic activity, which has aroused extensive interest in the fields of biosensors, biomedicine, and climate and ecosystems management. However, due to the complexity of structures and composition of nanozymes, atomic scale active centers have been extensively investigated, which helps with in-depth understanding of the nature of the biocatalysis. Single atom nanozymes (SANs) cannot only significantly enhance the activity of nanozymes but also effectively improve the selectivity of nanozymes owing to the characteristics of simple and adjustable coordination environment and have been becoming the brightest star in the nanozyme spectrum. The SANs based sensors have also been widely investigated due to their definite structural features, which can be helpful to study the catalytic mechanism and provide ways to improve catalytic activity. This perspective presents a comprehensive understanding on the advances and challenges on SANs based sensors. The catalytic mechanisms of SANs and then the sensing application from the perspectives of sensing technology and sensor construction are thoroughly analyzed. Finally, the major challenges, potential future research directions, and prospects for further research on SANs based sensors are also proposed.

Reversible inhibition of the oxidase-like activity of Fe single-atom nanozymes for drug detection

Mechanism research of nanozymes has always been of great interest since their emergence as outstanding mimics of friable natural enzymes. An important but rarely mentioned issue in mechanism research of nanozymology is the inhibitory effect of nanozymes. And conventional nanozymes with various active sites hinder the mechanism research, while single-atom Fe–N–C nanozymes with similar active sites to natural enzymes exhibit structural advantages. Herein, we synthesized Fe single-atom nanozymes (Fe-SANs) with ultrahigh oxidase-like activity and found that a common analgesic-antipyretic drug 4-acetamidophenol (AMP) had inhibitory effects for the oxidase-like activity of Fe-SANs. We investigated the inhibitory effects in detail and demonstrated that the inhibition type was reversible mixed-inhibition with inhibition constants (K_i and ) of 0.431 mM and 0.279 mM, respectively. Furthermore, we put forward a colorimetric method for AMP detection based on nanozyme inhibition. The research on the inhibitory effects of small molecules on nanozymes expands the scope of analysis based on nanozymes and the inhibition mechanism study may offer some insight into investigating the interaction between nanozymes and inhibitors.

Inhibitory effects of paracetamol on the oxidase-like activity of Fe single-atom nanozymes.

Copper fumarate with high-bifunctional nanozyme activities at different pH values for glucose and epinephrine colorimetric detection in human serum

Metal-organic frameworks (MOFs) have attracted extensive attention for the development of colorimetric detection methods due to their ease of modification and high density of active sites. However, most of the reported colorimetric sensors based on MOFs show only a single nanozyme activity. Herein, the bifunctional enzyme activities of a hexagonal prism Cu MOF with fumaric acid as the ligand (Cu FMA), namely laccase-like activity under alkaline conditions (pH = 8) and peroxidase-like activity under acidic conditions (pH = 4), were verified. The specificity of Cu FMA at different pH values may be due to the presence of the Cu⁺ active center introduced by the weak reducibility of FMA. At pH = 8, Cu⁺ active centers are beneficial for dissociating the H-O bonds of phenolic compounds for the laccase system. In contrast, the dissociation of H-O is weakened at pH = 4, which prompts the breaking of the O-O bonds of H₂O₂ as a Fenton-like reaction for the peroxidase system. Based on the dual enzyme activities, Cu FMA sensors exhibit outstanding detectability for epinephrine and glucose with linear ranges of 2.7-54.6 μM and 0.01-0.8 mM and detection limits of 1.1 μM and 2.28 × 10^-7 M, respectively. The Cu FMA colorimetric sensor can be applied for detecting and measuring glucose and epinephrine in human serum samples. This work paves the way for Cu MOFs to be used as the basis for rational regulation of the activity of dual nanozymes and for multifunctional applications under completely independent conditions.

A ratiometric electrochemical biosensor for glycated albumin detection based on enhanced nanozyme catalysis of cuprous oxide-modified reduced graphene oxide nanocomposites

Nanozymes have enzyme-like characteristics and nanozyme-based electrochemical sensors have been widely studied for biomarker detection. In this work, cuprous oxide-modified reduced graphene oxide (Cu₂O-rGO) nanozyme was prepared by simultaneous reduction of copper chloride and graphene oxide. This Cu₂O-rGO nanozyme displayed an outstanding electrocatalytic activity to glucose oxidation and was used as the modified material of a glassy carbon electrode to fabricate an electrochemical ratiometric biosensor for glycated albumin (GA) detection. In this ratiometric biosensor, methylene blue-labeled DNA tripods (MB-tDNA) were adsorbed on the Cu₂O-rGO/GCE surface to form a bioinspired electrode (MB-tDNA/Cu₂O-rGO/GCE), in which the catalytic sites of Cu₂O-rGO were covered by MB-tDNA. In the presence of target GA, GA could be identified by the aptamer sequence contained in MB-tDNA, and a MB-tDNA/GA complex was formed and released into the solution, so the reduced current of MB-tDNA was decreased. Simultaneously, the oxidized current of the outer added glucose was increased since more catalytic sites of Cu₂O-rGO nanozyme on the substrate electrode surface were exposed. The ratio of the peak currents of glucose oxidation and methylene blue reduction (I_Glu/I_MB) was used to monitor the GA level and ultimately improve the accuracy of the method. The electrochemical sensor showed a low detection limit of 0.007 μg mL^-1 and a wide linear range from 0.02 to 1500 μg mL^-1. The proposed sensor was also successfully used to measure the GA expression level in the blood serum of a diabetic mouse model.

Molybdenum Selenide/Porous Carbon Nanomaterial Heterostructures with Remarkably Enhanced Light-Boosting Peroxidase-like Activities

Nanozymes have emerged as a fascinating nanomaterial with enzyme-like characteristics for addressing the limitations of natural enzymes. Nevertheless, how to improve the relatively low catalytic activity still remains challenging. Herein, a facile recrystallizing salt template-assisted chemical vapor deposition method was utilized to synthesize MoSe₂/PCN heterostructures. This heterostructure displays remarkably enhanced light boosting peroxidase-like activities. Notably, the maximal reaction velocity of this heterostructure attains 17.81 and 86.89 μM min^-1 [for o-phenylenediamine (OPD) and 3,3'5,5'-tetramethylbenzidine (TMB), respectively]. Moreover, various characterization means were performed to explore the mechanism deeply. It is worth mentioning that the photoinduced electrons generated by the heterostructure directly react with H₂O₂ to yield plentiful ^•OH for the effective oxidation of OPD and TMB. Therefore, this work offers a promising approach for improving peroxidase-like activity by light stimulation and actuating the development of enzyme-based applications.

Disclosing the Origin of Transition Metal Oxides as Peroxidase (and Catalase) Mimetics

Since Fe3O4 was reported to mimic horseradish peroxidase (HRP) with comparable activity (2007), countless peroxidase nanozymes have been developed for a wide range of applications from biological detection assays to disease diagnosis and biomedicine development. However, researchers have recently argued that Fe3O4 has no peroxidase activity because surface Fe(III) cannot oxidize tetramethylbenzidine (TMB) in the absence of H2O2 (cf. HRP). This motivated us to investigate the origin of transition metal oxides as peroxidase mimetics. The redox between their surface Mn+ (oxidation) and H2O2 (reduction) was found to be the key step generating OH radicals, which oxidize not only TMB for color change but other H2O2 to produce HO2 radicals for Mn+ regeneration. This mechanism involving free OH and HO2 radicals is distinct from that of HRP with a radical retained on the Fe-porphyrin ring. Most importantly, it also explains the origin of their catalase-like activity (i.e., the decomposition of H2O2 into H2O and O2). Because the production of OH radicals is the rate-limiting step, the poor activity of Fe3O4 can be attributed to the slow redox of Fe(II) with H2O2, which is two orders of magnitude slower than the most active Cu(I) among common transition metal oxides. We further tested glutathione (GSH) detection on the basis of its peroxidase-like activity to highlight the importance of understanding the mechanism when selecting materials with high performance.

Sensitive colorimetric glucose sensor by iron-based nanozymes with controllable Fe valence

The proportion of Fe2+ and Fe3+ in Fe-based nanozymes is a key point in determining their catalytic activity. However, it is hard to adjust the Fe2+/Fe3+ ratio in nanozyme systems to achieve the best catalytic performance. In this work, we successfully regulate Fe2+/Fe3+ ratios in a wide range of 0.81-1.45 based on a novel porous platform of Fe doped silica hollow spheres. The homogeneous distribution and stable fixation of Fe components in Fe doped silica hollow spheres facilitate the valence regulation of Fe in the reduction heating in H2/Ar. When the Fe doped spheres (FeOx@SHSs) were used as nanozymes, different Fe2+/Fe3+ ratios have shown to influence the peroxidase-like catalytic activity greatly. The highest activity at the ratio of 1.41 should be due to the combined effects of the accelerated reaction rate by Fe2+ and the enhanced catalytic cycle efficiency by Fe3+. The FeOx@SHSs-based nanozyme is further applied to construct a facile colorimetric biosensing system, which exhibited extremely sensitive determination of glucose. This work presents an effective platform for controlling Fe valences and optimizing the peroxidase-like activity for catalytic processes or sensing systems.

Fe-Coordinated Carbon Nanozyme Dots as Peroxidase-Like Nanozymes and Magnetic Resonance Imaging Contrast Agents

The catalytic activities of currently developed peroxidase-mimic nanozymes are generally limited. Therefore, further efforts are still needed to improve the catalytic performance of peroxidase nanozymes. Herein, we synthesized Fe-coordinated carbon nanozyme dots (Fe-CDs) that can serve as both efficient peroxidase nanozymes and T₂-magnetic resonance imaging (MRI) contrast agents. The intrinsic peroxidase-like activity of the Fe-CDs was explored by catalytic oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) with hydrogen peroxide (H₂O₂). The product showed better performance over natural horseradish peroxidase (HRP) and other mimetic peroxidases. Quantification of glucose and ascorbic acid detection showed that this nanozyme could be used to detect a minimum limit as low as 5 μM glucose. Moreover, the colorimetric detection technique was used to detect serum glucose in mice, and the detection result was comparable with autobiochemistry analyzer results using a glucose assay kit. Furthermore, the Fe-CDs showed good magnetism properties and provided promising MR imaging of tumors with excellent biocompatibility.

Black Phosphorus Nanostructure Based Highly Sensitive and Selective Surface Plasmon Resonance Sensor for Biological and Chemical Sensing: A Review

Surface plasmon resonance (SPR) is an attention-grabbing sensor type, which offers the sensitive and selective detection of biomolecules and environmentally toxic substances. Notably, the SPR sensor gives excellent rewards including real-time, in-situ, and label-free measuring capability as compared to existing sensing technologies. As a result, these noteworthy merits of the SPR sensor make it straightforward to investigate the molecular events and chemical/gas molecule interaction. Unfortunately, there are different binding events including smaller molecular mass substances, which cannot be detected at the SPR sensor. Accordingly, this downside of the SPR sensor eventually led to the design and implementation of new approaches for sensitivity and selectivity improvement for sensing applications in different fields. Recently, the black phosphorus (BP) derived 2 D nanomaterial is stand out as a distinctive nanostructure in comparison to recently reported other 2 D nanomaterials. Substantial and functional characteristics of BP including simplicity of operation, optical properties, high carrier mobility, stronger immobilization of receptors and biomolecules, electronic bridging playing important role in the highly selective and sensitive assessment of analyte. The designed BP nanostructures are mostly serving to accelerate the plasmon material signals followed by improved molecular sensing that may due to 40-times faster-sensing responses of BP nanostructure than reported 2 D nanomaterials. Therefore, the present review article sheds light on the latest significant advances in biological and toxic gas detection through 2D BP nanostructures based SPR sensors. In the future, this review will facilitate detailed insights into the development of BP-based groundbreaking frameworks for highly sensitive and selective recognition of biomolecules and environmental pollutants.

Mesoporous TiO2-based architectures as promising sensing materials towards next-generation biosensing applications

In the past two decades, mesoporous TiO2 has emerged as a promising material for biosensing applications. In particular, mesoporous TiO2 materials with uniform, well-organized pores and high surface areas typically exhibit superior biosensing performance, which includes high sensitivity, broad linear response, low detection limit, good reproducibility, and high specificity. Therefore, the development of biosensors based on mesoporous TiO2 has significantly intensified in recent years. In this review, the expansion and advancement of mesoporous TiO2-based biosensors for glucose detection, hydrogen peroxide detection, alpha-fetoprotein detection, immobilization of enzymes, proteins, and bacteria, cholesterol detection, pancreatic cancer detection, detection of DNA damage, kanamycin detection, hypoxanthine detection, and dichlorvos detection are summarized. Finally, the future perspective and research outlook on the utilization of mesoporous TiO2-based biosensors for the practical diagnosis of diseases and detection of hazardous substances are also given.

Polarity control of DNA adsorption enabling the surface functionalization of CuO nanozymes for targeted tumor therapy

Nanomaterials with intrinsic catalytic activities (nanozyme) have drawn broad attention for various biomedical applications, with peroxidase-mimic nanozymes particularly attractive for cancer therapy due to their capability to catalyze the conversion of tumor-abundant H₂O₂ into more toxic hydroxyl radicals (˙OH) for effective tumor ablation. However, the facile surface modification of nanozymes for tumor-targeted delivery while retaining their catalytic activity remains a challenge. Here, we report an approach to functionalize the CuO nanozyme with DNA to enable targeted delivery and selective tumor destruction. We systematically studied the adsorption of DNA on the CuO surface, with special attention paid to the catalytic activity and DNA adsorption stability in the presence of various biological ligands. After gaining a fundamental understanding, a di-block DNA sequence was designed for adsorption on to the CuO surface, which allowed stable adsorption during in vivo circulation, passive accumulation into the tumor tissue, and the specific recognition of tumor cells, resulting in significant nanocatalytic tumor suppression in tumor xenograft mice models with no noticeable cytotoxicity. This work paves a way for the rational design of DNA-modified nanozymes for catalytic tumor therapy, and fundamentally, provides a new insight into the biointerface chemistry of CuO with DNA.

MoS2-based composite nanozymes with superior peroxidase-like activity for ultrasensitive SERS detection of glucose

An ultrasensitive biosensor with high peroxidase-like catalytic activity and excellent SERS properties is developed based on PANI@MoS2@Fe3O4@Au nanozymes.

Spinel Zn3V3O8 nanosheets via a one-step hydrothermal synthesis with peroxidase-like activity for high sensitivity glucose colorimetric detection in synthetic perspiration

Due to their specific spinel structure, ternary oxides with multi-catalytic sites on a highly active exposed surface are recommended as alternative bio-catalysts. Spinel zinc vanadate with two-dimensional nanosheets (Zn3V3O8 NSs) was synthesised using a one-step hydrothermal route with CTAB and glycine as a bi-surfactant, where each NS has a thin thickness (25 nm) and wide cross section (2 μm). As a key parameter for peroxidase-like activity, the Michaelis-Menten constant (Km) for Zn3V3O8 NSs was calculated to be 0.271 mM with TMB and 1.317 mM with H2O2 at optimum conditions, indicating a higher affinity for the exposed (011) facet towards horseradish peroxidases. This affinity is related to the geometric matching between V4+ active sites and the terminal amino groups of TMB. The V4+ ions on the (011) facet act as dangling bonds and readily react with H2O2 in a Fenton-like reaction. The peroxidase-like activity for Zn3V3O8 NSs is verified by the formation of [V(IV)-OO˙] by the ˙O2- and V5+ near V4+ sites, but oxidase activity for Zn3V3O8 NSs. Based on the peroxidase-like activity, Zn3V3O8 NSs were used as a colorimetric glucose sensor with a wide linear range from 0.01 to 0.5 mM and a detection limit (LOD = 3σ/S) of 2.81 × 10-7 M. The colorimetric sensor also exhibited high accuracy and selectivity in synthetic perspiration samples.

Hydrogen Peroxide Detection by Super-Porous Hybrid CuO/Pt NP Platform: Improved Sensitivity and Selectivity

A super-porous hybrid platform can offer significantly increased number of reaction sites for the analytes and thus can offer advantages in the biosensor applications. In this work, a significantly improved sensitivity and selectivity of hydrogen peroxide (H₂O₂) detection is demonstrated by a super-porous hybrid CuO/Pt nanoparticle (NP) platform on Si substrate as the first demonstration. The super-porous hybrid platform is fabricated by a physiochemical approach combining the physical vapor deposition of Pt NPs and electrochemical deposition of super-porous CuO structures by adopting a dynamic hydrogen bubble technique. Under an optimized condition, the hybrid CuO/Pt biosensor demonstrates a very high sensitivity of 2205 µA/mM·cm² and a low limit of detection (LOD) of 140 nM with a wide detection range of H₂O₂. This is meaningfully improved performance as compared to the previously reported CuO-based H₂O₂ sensors as well as to the other metal oxide-based H₂O₂ sensors. The hybrid CuO/Pt platform exhibits an excellent selectivity against other interfering molecules such as glucose, fructose, dopamine, sodium chloride and ascorbic acid. Due to the synergetic effect of highly porous CuO structures and underlying Pt NPs, the CuO/Pt architecture offers extremely abundant active sites for the H₂O₂ reduction and electron transfer pathways.

ATP induced alteration in the peroxidase-like properties of hollow Prussian blue nanocubes: a platform for alkaline phosphatase detection

Breaking the pH limitation of the enzyme-like activity of nanomaterials is of great importance for extending their applications in environmental and biomedical fields. Herein, to mimic the role of histidine residues in horseradish peroxidase (HRP), adenosine 5'-triphosphate (ATP) is reported to improve the peroxidase-like activity of hollow Prussian blue nanocubes (hPBNCs). Due to the inherited porous structures, hPBNCs can expose all the binding sites as far as possible to ATP to significantly amplify their catalytic activity and broaden their applicable pH range up to pH 12. Introduction of ATP provides the possibility of realizing efficient catalytic reactions under alkaline conditions. Upon binding with hPBNCs, ATP can enhance the stability of hPBNCs, increase the affinities of the catalysts towards substrates and improve the conductivity of hPBNCs as well as change the decomposed product from H₂O₂. Moreover, on the basis of the different catalytic activities of hPBNCs towards ATP, adenosine 5'-diphosphate and adenosine 5'-monophosphate, hPBNCs-ATP is utilized to construct a novel colorimetric sensor for the detection of alkaline phosphatase (ALP) activity in biological fluids, which is significantly important for the clinical diagnosis of ALP-related diseases.

Nanozyme-based electrochemical biosensors for disease biomarker detection

In recent years, a new group of nanomaterials named nanozymes that exhibit enzyme-mimicking catalytic activity has emerged as a promising alternative to natural enzymes. Nanozymes can address some of the intrinsic limitations of natural enzymes such as high cost, low stability, difficulty in storage, and specific working conditions (i.e., narrow substrate, temperature and pH ranges). Thus, synthesis and applications of hybrid and stimuli-responsive advanced nanozymes could revolutionize the current practice in life sciences and biosensor applications. On the other hand, electrochemical biosensors have long been used as an efficient way for quantitative detection of analytes (biomarkers) of interest. As such, the use of nanozymes in electrochemical biosensors is particularly important to achieve low cost and stable biosensors for prognostics, diagnostics, and therapeutic monitoring of diseases. Herein, we summarize the recent advances in the synthesis and classification of common nanozymes and their application in electrochemical biosensor development. After briefly overviewing the applications of nanozymes in non-electrochemical-based biomolecular sensing systems, we thoroughly discuss the state-of-the-art advances in nanozyme-based electrochemical biosensors, including genosensors, immunosensors, cytosensors and aptasensors. The applications of nanozymes in microfluidic-based assays are also discussed separately. We also highlight the challenges of nanozyme-based electrochemical biosensors and provide some possible strategies to address these limitations. Finally, future perspectives on the development of nanozyme-based electrochemical biosensors for disease biomarker detection are presented. We envisage that standardization of nanozymes and their fabrication process may bring a paradigm shift in biomolecular sensing by fabricating highly specific, multi-enzyme mimicking nanozymes for highly sensitive, selective, and low-biofouling electrochemical biosensors.

Superparamagnetic nanoarchitectures for disease-specific biomarker detection

Synthesis, bio-functionalization, and multifunctional activities of superparamagnetic-nanostructures have been extensively reviewed with a particular emphasis on their uses in a range of disease-specific biomarker detection and associated challenges.