Optimizing Iodine Enrichment through Induced-Fit Transformations in a Flexible Ag(I)-Organic Framework: From Accelerated Adsorption Kinetics to Record-High Storage Density

Efficient capture and storage of radioactive I2 is a prerequisite for developing nuclear power but remains a challenge. Here, two flexible Ag-MOFs (FJI-H39 and 40) with similar active sites but different pore sizes and flexibility are prepared; both of them can capture I2 with excellent removal efficiencies and high adsorption capacities. Due to the more flexible pores, FJI-H39 not only possesses the record-high I2 storage density among all the reported MOFs but also displays a very fast adsorption kinetic (124 times faster than FJI-H40), while their desorption kinetics are comparable. Mechanistic studies show that FJI-H39 can undergo induced-fit transformations continuously (first contraction then expansion), making the adsorbed iodine species enrich near the Ag(I) nodes quickly and orderly, from discrete I- anion to the dense packing of various iodine species, achieving the very fast adsorption kinetic and the record-high storage density simultaneously. However, no significant structural transformations caused by the adsorbed iodine are observed in FJI-H40. In addition, FJI-H39 has excellent stability/recyclability/obtainability, making it a practical adsorbent for radioactive I2. This work provides a useful method for synthesizing practical radioactive I2 adsorbents.

Iodine capture of a two-dimensional layered uranyl-organic framework: a combined DFT and AIMD study

To develop nuclear energy sustainably, it is important to effectively capture radioiodine in nuclear waste. In this study, we used density functional theory (DFT) and ab initio molecular dynamics (AIMD) calculations to investigate how well the uranyl-organic framework (UOF) could capture radioiodine. We found that the uranyl center and C-N ring sites in both cluster and periodic UOF models are very attractive to the I2 molecule. The adsorption energies of the I2 molecule in the periodic UOF models are as high as -1.10 eV, which is much higher than in the cluster model. The interaction characteristics between the I2 molecule and the UOF were revealed by electronic density topological analyses. Our AIMD simulations at 300 and 600 K have confirmed that the UOF has high adsorption kinetics for I2 molecules and can effectively capture them. The UOF has a high adsorption capacity and good adsorption stability for the I2 molecule, making it a promising option for the environmentally friendly removal of radioiodine.

Hollow Core-Shell Bismuth Based Al-Doped Silica Materials for Powerful Co-Sequestration of Radioactive I2 and CH3I

Developing pure inorganic materials capable of efficiently co-removing radioactive I2 and CH3I has always been a major challenge. Bismuth-based materials (BBMs) have garnered considerable attention due to their impressive I2 sorption capacity at high-temperature and cost-effectiveness. However, solely relying on bismuth components falls short in effectively removing CH3I and has not been systematically studied. Herein, a series of hollow mesoporous core-shell bifunctional materials with adjustable shell thickness and Si/Al ratio by using silica-coated Bi2O3 as a hard template and through simple alkaline-etching and CTAB-assisted surface coassembly methods (Bi@Al/SiO2) is successfully synthesized. By meticulously controlling the thickness of the shell layer and precisely tuning of the Si/Al ratio composition, the synthesis of BBMs capable of co-removing radioactive I2 and CH3I for the first time, demonstrating remarkable sorption capacities of 533.1 and 421.5 mg g-1, respectively is achieved. Both experimental and theoretical calculations indicate that the incorporation of acid sites within the shell layer is a key factor in achieving effective CH3I sorption. This innovative structural design of sorbent enables exceptional co-removal capabilities for both I2 and CH3I. Furthermore, the core-shell structure enhances the retention of captured iodine within the sorbents, which may further prevent potential leakage.

A Cucurbit[8]uril-Based Supramolecular Framework Material for Reversible Iodine Capture in the Vapor Phase and Solution

The safe and efficient management of hazardous radioactive iodine is significant for nuclear waste reprocessing and environmental industries. A novel supramolecular framework compound based on cucurbit[8]uril (Q[8]) and 4-aminopyridine (4-AP) is reported in this paper. In the single crystal structure of Q[8]-(4-AP), two 4-AP molecules interact with the outer surface of Q[8] and the two other 4-AP molecules are encapsulated into the Q[8] cavity to form the self-assembly Q[8]-(4-AP). Iodine adsorption experiments show that the as-prepared Q[8]-(4-AP) not only has a high adsorption capacity (1.74 g· g-1) for iodine vapor but also can remove the iodine in the organic solvent and the aqueous solution with the removal efficiencies of 95% and 91%, respectively. The presence of a large number of hydrogen bonds between the iodine molecule and the absorbent, as seen in the single crystal structure of iodine-loaded Q[8]-(4-AP) (I2@Q[8]-(4-AP)), is thought to be responsible for the exceptional iodine adsorption capacity of the material. In addition, the adsorption-desorption tests reveal that the self-assembly material has no significant loss of iodine capture capacity after five cycles, indicating that it has sufficient reusability.

Iodine Adsorption-Desorption-Induced Structural Transformation and Improved Ag+ Turn-On Luminescent Sensing Performance of a Nonporous Eu(III) Metal-Organic Framework

Posttreatment of pristine metal-organic frameworks (MOFs) with suitable vapor may be an effective way to regulate their structures and properties but has been less explored. Herein, we report an interesting example in which a crystalline nonporous Eu(III)-MOF was transferred to a porous amorphous MOF (aMOF) via iodine vapor adsorption-desorption posttreatment, and the resulting aMOF showed improved turn-on sensing properties with respect to Ag+ ions. The crystalline Eu-MOF, namely, Eu-IPDA, was assembled from Eu(III) and 4,4'-{4-[4-(1H-imidazol-1-yl)phenyl]pyridine-2,6-diyl}dibenzoic acid (H2IPDA) and exhibited a two-dimensional (2D) coordination network based on one-dimensional secondary building blocks. The close packing of the 2D networks gives rise to a three-dimensional supramolecular framework without any significant pores. Interestingly, the nonporous Eu-IPDA could absorb iodine molecules when Eu-IPDA crystals were placed in iodine vapor at 85 °C, and the adsorption capacity was 1.90 g/g, which is comparable to those of many MOFs with large BET surfaces. The adsorption of iodine is attributed to the strong interactions among the iodine molecule, the carboxy group, and the N-containing group and leads to the amorphization of the framework. After immersion of the iodine-loaded Eu-IPDA in EtOH, approximately 89.7% of the iodine was removed, resulting in a porous amorphous MOF, denoted as a-Eu-IPDA. In addition, the remaining iodine in the a-Eu-IPDA framework causes strong luminescent quenching in the fluorescence emission region of the Eu(III) center when compared with that in Eu-IPDA. The luminescence intensity of a-Eu-IPDA in water suspensions was significantly enhanced when Ag+ ions were added, with a detection limit of 4.76 × 10-6 M, which is 1000 times that of pristine Eu-IPDA. It also showed strong anti-interference ability over many common competitive metal ions and has the potential to sense Ag+ in natural water bodies and traditional Chinese medicine preparations. A mechanistic study showed that the interactions between Ag+ and the absorbed iodine, the carboxylate group, and the N atoms all contribute to the sensing performance of a-Eu-IPDA.

Construction of Ketoenamine-Based Covalent Organic Frameworks with Electron-Rich Sites for Efficient and Rapid Removal of Iodine from Solution

Porous covalent organic frameworks (COFs) have been widely used for the efficient removal of iodine from solution due to their abundance of electron-rich sites. In this study, two kinds of ketoenamine-based COFs, TpBD-(OMe)2 and TpBD-Me2, are successfully synthesized via Schiff base reaction under solvothermal conditions using 1, 3, 5-triformylphoroglucinol as aldehyde monomer, o-tolidine and o-dianisidine as amino monomers. The ability of TpBD-(OMe)2 and TpBD-Me2 to adsorb iodine in cyclohexane or aqueous solutions has been quantitatively analyzed and interpreted in terms of adsorption sites. TpBD-Me2 possesses two adsorption sites, -NH- and -C=O, and exhibits an adsorption capacity of 681.67 mg/g in cyclohexane, with an initial adsorption rate of 0.6 g/mol/min with respect to COF unit cell. The adsorption capacity of TpBD-(OMe)2 can be as high as 728.77 mg/g, and the initial adsorption rate of TpBD-(OMe)2 can reach 1.2 g/mol/min in the presence of oxygen atoms between the methyl group and the benzene ring. Compared with TpBD-Me2, the higher adsorption capacity and adsorption rate of TpBD-(OMe)2 towards iodine are not only reflected in organic solvents, but also in aqueous solutions. It is proven through X-ray photoelectron spectroscopy and Raman spectroscopy that iodine exists in the form of I2, I3-, and I5- within TpBD-(OMe)2 and TpBD-Me2 after adsorption. This work not only expands the application of COFs in the field of iodine adsorption, but also provides research ideas and important an experimental basis for the optimization of iodine adsorption sites.

Th6-Based Multicomponent Heterometallic Metal-Organic Frameworks Featuring 6,12-Connected Topology for Iodine Adsorption

Its high coordination number and tendency to cluster make Th4+ suitable for constructing metal-organic frameworks (MOFs) with novel topologies. In this work, two novel thorium-based heterometallic MOF isomers (IHEP-17 and IHEP-18) were assembled from a Th6 cluster, a multifunctional organic ligand [4-(1H-pyrazol-4-yl)benzoic acid (HPyba)], and Cu2+/Ni2+ cations via the one-pot solvothermal synthesis strategy. The framework features a 6,12-connected new topology net and contains two kinds of supramolecular cage structures, Th36M4 and Th24M2, suitable for guest exchange. Both MOF materials can efficiently adsorb I2. X-ray photoelectron spectroscopy, Raman spectroscopy, and single-crystal X-ray diffraction indicate that the adsorbed iodine is uniformly distributed within the Th36M4 cage but not the Th24M2 cage in the form of I3-.

Adsorption and Detection of Iodine Species by a Thorium-Based Metal-Organic Framework

Actinide-bearing metal-organic frameworks (MOFs) encompass intriguing structures and properties, but the radioactivity of actinide cripples their applications. Herein, we have constructed a new thorium-based MOF (Th-BDAT) as a bifunctional platform for the adsorption and detection of radioiodine, a more radioactive fission product that can readily spread through the atmosphere in its molecular form or via solution as anionic species. The iodine capture within the framework of Th-BDAT from both the vapor phase and the cyclohexane solution has been verified, showing that Th-BDAT features maximum I₂ adsorption capacities (Q_max) of 959 and 1046 mg/g, respectively. Notably, the Q_max of Th-BDAT toward I₂ from cyclohexane solution ranks among the highest value for Th-MOFs reported to date. Furthermore, incorporating highly extended and π-electron-rich BDAT^4- ligands renders Th-BDAT as a luminescent chemosensor whose emission can be selectively quenched by iodate with a detection limit of 1.367 μM. Our findings thus foreshadow promising directions that might unlock the full potential of actinide-based MOFs from the point of view of practical application.

A bifunctionalised Pb-based MOF for iodine capture and dye removal

A 2-dimensional Pb(II) metal-organic framework, [Pb(bdc)_0.5(py-Phen)NO₃]_n (SM-3), was synthesized under solvothermal conditions using a mixed ligand approach. SM-3 was assembled using dinuclear SBUs [Pb₂(COO)₂]^2-, an oxygen donor H₂bdc = 1,4-benzene dicarboxylic acid, and nitrogen donor py-Phen = pyrazino[2,3-f][1,10]-phenanthroline linkers. SM-3 was characterized by elemental analysis, FT-IR, powder-X-ray diffraction, thermal gravimetric analysis, SEM, EDS, TEM, and single-crystal X-ray diffraction techniques. Crystallographic studies confirmed that SM-3 displays a 2D layered structure with unique anagostic (Pb⋯H) interactions. Interestingly, the presence of abundant π-electron-rich rings embellished with free -N donor sites in the framework makes SM-3 an excellent adsorbent that exhibits adsorption performance for iodine and dyes. The experimental results show that SM-3 reversibly adsorbs radioactive iodine in the solution and vapor phases and exhibits selective adsorption performance for hazardous cationic dyes, namely, methylene blue (MB) and rhodamine-B (Rh-B), from aqueous solution. Moreover, the possible mechanism of iodine and dye adsorption was also discussed in detail. Thus, this work is remarkable for coordination chemists to engineer layered MOFs for adsorption purposes and expands their potential characteristics by converting them into 2D MOF nanosheets to further enhance the adsorption of hazardous pollutants for environment protection.

A robust thorium-organic framework as a bifunctional platform for iodine adsorption and Cr(VI) sensitization

Simple synthetic modulation based on thorium nitrate and tris((4-carboxyl)phenylduryl)amine (H₃TCBPA) gives rise to a new thorium-based metal-organic framework, Th-TCBPA, which features excellent hydrolytic and thermal stabilities. Incorporating electron-rich TCBPA^3- linkers not only endows Th-TCBPA with high adsorption capacity toward radioiodine vapor, but also makes it a luminescence sensor for the highly sensitive and selective detection of Cr(VI) anions.

Cluster-Based Crystalline Materials for Iodine Capture

The treatment of radioactive iodine in nuclear waste has always been a critical issue of social concern. The rational design of targeted and efficient capture materials is of great significance to the sustainable development of the ecological environment. In recent decades, crystalline materials have served as a molecular platform to study the binding process and capture mechanism of iodine molecules, enabling people to understand the interaction between radioactive iodine guests and pores intuitively. Cluster-based crystalline materials, including molecular clusters and cluster-based metal-organic frameworks, are emerging candidates for iodine capture due to their aggregative binding sites, precise structural information, tunable pores/packing patterns, and abundant modifications. Herein, recent progress of different types of cluster materials and cluster-dominated metal-organic porous materials for iodine capture is reviewed. Research prospects, design strategies to improve the affinity for iodine and possible capture mechanisms are discussed.

In Situ Confined Synthesis of a Copper-Encapsulated Silicalite-1 Zeolite for Highly Efficient Iodine Capture

Effective capture of radioactive iodine is highly desirable for decontamination purposes in spent fuel reprocessing. Cu-based adsorbents with a low cost and high chemical affinity for I2 molecules act as a decent candidate for iodine elimination, but the low utilization and stability remain a significant challenge. Herein, a facile in situ confined synthesis strategy is developed to design and synthesize a copper-encapsulated flaky silicalite-1 (Cu@FSL-1) zeolite with a thickness of ≤300 nm. The maximum iodine uptake capacity of Cu@FSL-1 can reach 625 mg g-1 within 45 min, which is 2 times higher than that of a commercial silver-exchanged zeolite even after nitric acid and NOX treatment. The Cu nanoparticles (NPs) confined within the zeolite exert superior iodine adsorption and immobilization properties as well as high stability and fast adsorption kinetics endowed by the all-silica zeolite matrix. This study provides new insight into the design and controlled synthesis of zeolite-confined metal adsorbents for efficient iodine capture from gaseous radioactive streams.

Progress in solid state and coordination chemistry of actinides in China

In the past decade, the area of solid state chemistry of actinides has witnessed a rapid development in China, based on the significantly increased proportion of the number of actinide containing crystal structures reported by Chinese researchers from only 2% in 2010 to 36% in 2021. In this review article, we comprehensively overview the synthesis, structure, and characterizations of representative actinide solid compounds including oxo-compounds, organometallic compounds, and endohedral metallofullerenes reported by Chinese researchers. In addition, Chinese researchers pioneered several potential applications of actinide solid compounds in terms of adsorption, separation, photoelectric materials, and photo-catalysis, which are also briefly discussed. It is our hope that this contribution not only calls for further development of this area in China, but also arouses new research directions and interests in actinide chemistry and material sciences.

Hydroxy-Functionalized Hypercrosslinked Polymers (HCPs) as Dual Phase Radioactive Iodine Scavengers: Synergy of Porosity and Functionality

Large-scale nuclear power plant production of iodine radionuclides (129 I, 131 I) pose huge threat in the events of nuclear disaster. Effective removal of radioiodine from nuclear waste is one of the most critical challenge because of the drawbacks of state-of-the-art adsorbents such as high cost, low uptake capacity and non-recyclability. Herein, two hydroxy-functionalized (-OH) hypercrosslinked polymers (HCPs), namely HCP-91 and HCP-92, have been synthesized and employed towards capture of iodine. High chemical stability along with synergistic harmony of high porosity and functionality of these materials makes them suitable candidates for capture of iodine from both vapor phase and water medium. Moreover, both the HCPs showed superior iodine removal performance from water in terms of fast kinetics and high removal efficiency (2.9 g g-1 and 2.49 g g-1 for HCP-91 and HCP-92 respectively). The role of functionality (-OH groups) and porosity has been established with the help of HCP-91, HCP-92 and non-functionalized biphenyl HCP for the efficient capture of I3 - ions from water. In addition, both HCPs exhibited excellent selectivity and recyclability towards triiodide ions, rendering the potential of these materials towards real-time applications. Lastly, Density functional theoretical studies revealed key insights and corroborate well with the experimental findings.

Synthesis and structure of metal-TCPE (metal = Th, Ce) metal-organic frameworks based on 1,2,4,5-tetrakis(4-carboxyphenyl) ethylene

Two new metal-organic frameworks (MOFs) (Th/ Ce -TCPE) based on 1,2,4,5-tetrakis(4-carboxyphenyl)ethylene were obtained using a straightforward reaction under moderate conditions. Th and Ce formed the central units of this MOF in the mononuclear and in the unusual trinuclear cluster configurations, respectively. The resulting MOFs were analysed by fluorescence spectroscopy to understand their luminescence. The obtained data revealed that benzene's electron cloud density and torsion angle on the ligand were affected by the acetic acid molecule and Th(IV), which caused Th-TCPE to irradiate stronger blue emission, but Ce-TCPE showed no fluorescence due to the self-quenching. Such a unique luminescence property could be used for fluorescence or radiopharmaceutical sensing.

Removal of COD in wastewater by magnetic coagulant prepared from modified fly ash

In this paper, magnetic coagulants (Fe-AFA, Fe-BFA) were prepared, by mixing acid-modified fly ash (AFA) and base-modified fly ash (BFA) with magnetic components, as adsorbents for chemical oxygen demand (COD) in desulfurization wastewater and their adsorption kinetics and mechanism are reported. BET, SEM, EDS, FTIR, XPS, magnetization intensity, and batch experiments on coagulation kinetic and adsorption isothermal characteristics of magnetic coagulants were carried out. The results show that Fe-AFA has the best COD adsorption performance and superparamagnetism, and the COD removal amounts can reach 5.69 mg/g, which is 112.43% higher than the raw fly ash. It was also found that the quasi-second-order kinetic and Langmuir equation could well describe the COD coagulation process. Thermodynamic tests results showed that the COD removal was a spontaneous, endothermic, and irreversible process. Reusability of magnetic coagulants was investigated. After five cycles, the COD removal amount of Fe-AFA was 2.74 mg/g. These findings provide a feasible method for environmental-benign utilization of fly ash as low-cost adsorbents in wastewater treatment.

Recent advances in the applications of thorium-based metal-organic frameworks and molecular clusters

This perspective highlights the recent advances in the structural and practical aspects of thorium-based metal-organic frameworks (Th-MOFs) and molecular clusters. Thorium, as an underexplored actinide, features surprisingly rich coordination geometries and accessibility of the 5f orbital. These features lead to a myriad of topologies and electronic structures, many of which are undocumented for other tetravalent metal-containing MOFs or clusters. Moreover, Th-MOFs inherit the modularity, structural tunability, porosity, and versatile functionality of the state-of-the-art MOFs. Recognizing the radioactive nature of these thorium-bearing materials that may limit their practical uses, Th-MOFs and Th-clusters still have great potential for various applications, including radionuclide sequestration, hydrocarbon storage/separation, radiation detection, photoswitch, CO₂ conversion, photocatalysis, and electrocatalysis. The objective of this updated perspective is to propose pathways for the renaissance of interest in thorium-based materials.

Adsorption of iodine in metal-organic framework materials

Nuclear power will continue to provide energy for the foreseeable future, but it can pose significant challenges in terms of the disposal of waste and potential release of untreated radioactive substances. Iodine is a volatile product from uranium fission and is particularly problematic due to its solubility. Different isotopes of iodine present different issues for people and the environment. 129I has an extremely long half-life of 1.57 × 107 years and poses a long-term environmental risk due to bioaccumulation. In contrast, 131I has a shorter half-life of 8.02 days and poses a significant risk to human health. There is, therefore, an urgent need to develop secure, efficient and economic stores to capture and sequester ionic and neutral iodine residues. Metal-organic framework (MOF) materials are a new generation of solid sorbents that have wide potential applicability for gas adsorption and substrate binding, and recently there is emerging research on their use for the selective adsorptive removal of iodine. Herein, we review the state-of-the-art performance of MOFs for iodine adsorption and their host-guest chemistry. Various aspects are discussed, including establishing structure-property relationships between the functionality of the MOF host and iodine binding. The techniques and methodologies used for the characterisation of iodine adsorption and of iodine-loaded MOFs are also discussed together with strategies for designing new MOFs that show improved performance for iodine adsorption.

Introducing Zirconium Organic Gels for Efficient Radioiodine Gas Removal

Iodine radioisotope, as one of the most important fission products of uranium, may cause severe damage to human health when it is accidentally discharged into the environment. Hence, efficient removal of radioactive iodine is one of the most critical issues for both used nuclear fuel (UNF) reprocessing and environmental remediation. In this work, three metal-organic gels (MOGs) were introduced for iodine removal. The presented zirconium-based MOGs, namely, CWNU, CWNU-NH₂, and CWNU-2NH₂, were prepared via moderate solvothermal reactions. These MOGs all exhibit excellent chemical stability and reusability, marked iodine sorption capability, and favorable machinability, which can even rival commercial ones. The sorption capacities are determined to be 3.36, 4.10, and 4.20 g/g, respectively. The increased amount of amino group is considered to be responsible for the elevated iodine sorption capacity and kinetics, as confirmed by combined sorption studies and XPS analysis. The presented work sheds light on the utilization of MOGs for radioiodine capture.

Two isomeric metal-organic frameworks bearing stilbene moieties for high volatile iodine uptake

The efficient, green, and economical removal of radioactive iodine (I2) has drawn worldwide attention in the safe development of nuclear energy. Metal-organic frameworks (MOFs) have been demonstrated to be a...

A Ni(ii) metal–organic framework with helical channels for the capture of iodine via guest exchange induced amorphization

A Ni(ii) MOF based on a imidazole–tetrazole heterotopic tripodal ligand was constructed. It exhibits abilities for the stable capture of iodine molecules present in cyclohexane, water, and vapor, via amorphization induced by guest exchange.

Emergence of Thorium-Based Polyoxo Clusters as a Platform for Selective X-ray Dosimetry

A brand-new application of thorium-bearing clusters in the field of ionizing radiation detection is exemplified by two novel hexanuclear thorium clusters, Th-bppCOO-1 and Th-bppCOO-2, which incorporate carboxylate-functionalized 2,6-di(pyrazol-1-yl)pyridine ligands. Notably, Th-bppCOO-1 is composed of an unprecedented [Th₆(OH)₄O₄(H₂O)₅]¹²⁺ secondary building unit, the Th₆ core of which is decorated by five H₂O molecules. Furthermore, selective photoluminescence quenching responses of Th-bppCOO-1 and Th-bppCOO-2 toward X-ray over UV radiation have been demonstrated for the first time.

A cationic thorium-organic framework with triple single-crystal-to-single-crystal transformation peculiarities for ultrasensitive anion recognition

Single-crystal-to-single-crystal transformation of metal-organic frameworks has been met with great interest, as it allows for the creation of new materials in a stepwise manner and direct visualization of structural transitions when subjected to external stimuli. However, it remains a peculiarity among numerous metal-organic frameworks, particularly for the ones constructed from tetravalent metal cations. Herein, we present a cationic thorium-organic framework displaying unprecedented triple single-crystal-to-single-crystal transformations in organic solvents, water, and NaIO3 solution. Notably, both the interpenetration conversion and topological change driven by the SC-SC transformation have remained elusive for thorium-organic frameworks. Moreover, the single-crystal-to-single-crystal transition in NaIO3 solution can efficiently and selectively turn the ligand-based emission off, leading to the lowest limit of detection (0.107 μg kg-1) of iodate, one of the primary species of long-lived fission product 129I in aqueous medium, among all luminescent sensors.

Interface assembly of specific recognition gripper wrapping on activated collagen fiber for synergistic capture effect of iodine

Efficient capture of radioactive iodine (¹²⁹I, ¹³¹I) is of great significance in spent fuel treatment. In this paper, a new adsorbent named Catechin@ACF was successfully prepared through interface assembly of specific recognition gripper with plant polyphenols (catechin) on activated collagen fiber (ACF), and the catechin membrane with specific grip on iodine was successfully constructed on the surface of ACF. The results showed that the adsorbent assembled catechin membrane was rich in aromatic rings, hydroxyl groups and imine adsorption sites, and possessed specific recognition and capture characteristics of iodine. Moreover, the as-prepared Catechin@ACF showed excellent capture capacity for iodine vapor and iodine in organic solution with the maximum capture capacity of 2122.68 mg/g and 258.29 mg/g, respectively. In iodine-cyclohexane solution, the adsorption process was in according with the Pseudo first order kinetic and Langmuir isothermal model. In addition, the specific recognition and capture mechanism analysis indicated that the aromatic rings, phenolic hydroxyl groups and imine groups in the catechin membrane were the specific and effective grippers for iodine, and finally iodine formed a stable conjugated system with the adsorbent in the form of I^- and I₃^-. Therefore, the as-prepared specific iodine capturer Catechin@ACF was expected to play a vital role in the capture of radioactive iodine in spent fuel off-gas because of its specific recognition, high capture capacity, large-scale preparation, and environment-friendly.

Unveiling the Unique Roles of Metal Coordination and Modulator in the Polymorphism Control of Metal-Organic Frameworks

Polymorphism control of metal-organic frameworks is highly desired for elucidating structure-property relationships, but remains an empirical process and is usually done in a trial-and-error approach. We adopted the rarely used actinide cation Th⁴⁺ and a ditopic linker to construct a series of thorium-organic frameworks (TOFs) with a range of polymorphs. The extraordinary coordination versatility of Th⁴⁺ cations and clusters, coupled with synthetic modulation, gives five distinct phases, wherein the highest degree of interpenetration (threefold) and porosity (75.9 %) of TOFs have been achieved. Notably, the O atom on the capping site of the nine-coordinated Th⁴⁺ cation can function as a bridging unit to interconnect neighboring secondary building units (SBUs), affording topologies that are undocumented for other tetravalent-metal-containing MOFs. Furthermore, for the first time HCOOH has been demonstrated as a bridging unit of SBUs to further induce structural complexity. The resulting TOFs exhibit considerably different adsorption behaviors toward organic dyes, thus suggesting that TOFs represent an exceptional and promising platform for structure-property relationship study.

Stepwise Assembly of a Multicomponent Heterometallic Metal-Organic Framework via Th6-Based Metalloligands

Herein we present a new metalloligand, Th₆L₁₂ [IHEP-10; L = 4-pyrazolecarboxylic acid (H₂PyC)], which can be used to generate a novel multicomponent heterometallic metal-organic framework (MOF), [[Cu₃(μ₃-OH)(NO₃)(H₂O)₂]₂Th₆(μ₃-O)₄(μ₃-OH)₄(PyC)₆(HPyC)₆(H₂O)₆](NO₃)₂ (IHEP-11), through further assembly with second [Cu₃(μ₃-OH)(PyC)₃] clusters. In IHEP-11, six Cu₃ clusters are connected by six NO₃^- anions to form an unprecedented annular Cu₁₈ cluster, which can be viewed as a 12-connected node to link with 12 Th₆ clusters, resulting a 4,12-connected shp net. Benefiting from the cationic framework and 3D porous structure, IHEP-11 can efficiently remove ReO₄^- (an analogue of radioactive ⁹⁹TcO₄^-) from aqueous solution in a wide pH range. This work highlights the feasibility of constructing multicomponent MOFs through a step-by-step synthesis strategy based on metalloligands.

A microporous Ce-based MOF with the octahedron cage for highly selective adsorption towards xenon over krypton

The collection of high-purity noble gases with recyclable nuclides provides substantial economic benefits and minimizes the risk of environmental pollution, which is a future development tendency for nuclear industries. Here, Ce-SINAP-1, with its radiation-resistance (up to 20 kGy of γ-ray irradiation) and suitable pore channels for the separation of noble gases (Ar, Kr and Xe), was synthesized. Ce-SINAP-1 exhibited the selective adsorption of Xe (2.02 mmol g⁻¹) over Kr (0.67 mmol g⁻¹) and Ar (0.27 mmol g⁻¹) at 293 K (1 bar) with a Henry's selectivity of 8.24 (Xe/Kr), and an ideal adsorbed solution theory selectivity of 14.9 (Xe : Kr 20 : 80). The result of the dynamic breakthrough experiment also indicates a good separation for Xe/Kr with Ar.

A high selectivity of Xe over Kr at 293 K was achieved by a 3D Ce-based organic framework due to the geometric features. Favorable thermal stability and ionizing radio-resistance render it a promising candidate for radioactive inert gases treatment.

Comprehensive comparison of bismuth and silver functionalized nickel foam composites in capturing radioactive gaseous iodine

Developing an efficient and cheap iodine sorbent is of great practical significance in the modern nuclear industry. In this work, novel bismuth and silver functionalized Ni foam composites as iodine sorption materials (Bi-Ni foam and Ag-Ni foam) were successfully prepared via a simple solvothermal method. Through a series of iodine sorption experiments and characterization methods, iodine capture properties and corresponding sorption mechanism were comprehensively compared and thoroughly revealed. The results show that the core-sheath structure formed by the solvothermal reaction can supply more active sites (Bi⁰ or Ag⁰ particles) for the contact of radioactive iodine gas, thereby improving the sorption capacity of sorbents. Compared with Ag-Ni foam (456 mg/g), Bi-Ni foam exhibits a higher iodine capture capacity (658 mg/g), whereas silver-based material has a faster sorption kinetics. Such excellent sorption performances were attributed to the chemical reaction between Bi⁰/Ag⁰ particles and iodine gas, generating stable BiI₃/AgI. In addition, this type of sorbents inherits the external structure of the Ni foam skeleton, decreasing the physically sorbed iodine, and can be prepared in different shapes and sizes, which is of great practical significance.

Functionalized Ionic Porous Organic Polymers Exhibiting High Iodine Uptake from Both the Vapor and Aqueous Medium

Large-scale generation of radioactive iodine (¹²⁹I, ¹³¹I) in nuclear power plants pose a critical threat in the event of fallout, thus rendering the development of iodine sequestering materials (from both the vapor and aqueous medium) highly pivotal. Herein, we report two chemically stable ionic polymers containing multiple binding sites, including phenyl rings, imidazolium cations, and bromide anions, which in synergy promote adsorption of iodine/triiodide anions. In brief, exceptional iodine uptake (from the vapor phase) was observed at nuclear fuel reprocessing conditions. Furthermore, the ionic nature propelled removal of >99% of I₃^- from water within 30 min. Additionally, benchmark uptake capacities, as well as unprecedented selectivity, were observed for I₃^-anions. The excellent affinity (distribution coefficient, ∼10⁵ mL/g) enabled iodine capture from seawater-spiked samples. Moreover, iodine-loaded compounds showed conductivity (10^-4 S/cm, 10^-6 S/cm), placing them among the best known conducting porous organic polymers. Lastly, DFT studies unveiled key insights in coherence with the experimental findings.

An fcu Th-MOF Constructed from In Situ Coupling of Monovalent Ligands

Synthetic efforts targeting highly symmetrical metal–organic frameworks (MOFs) have always been relentless, for the symmetry of a MOF’s pore environment and overall crystal structure are relevant to the MOF’s properties and behavior. Herein, we report a novel Th-based MOF constructed from assembling highly symmetrical Th-oxo clusters via in situ reductive coupling of nitroso groups on the cluster surface. Nitroso groups have long been known to dimerize in a reversible fashion. Putting them on the monovalent ligands that decorate the Th-oxo clusters can facilitate a downstream assembly process that link the said clusters in a controllable and predictable manner, preserving the overall symmetry in the MOF product. Moreover, the assembly can be made permanent by reducing the azodioxy moiety to azo, effectively locking the symmetrical MOF form. We believe this process of assembling pre-formed Th-oxo clusters helps the overall MOF adopt a highly symmetrical topology (face-centered cubic, fcu) resembling the well-known UiO series MOFs based on tetravalent Zr/Hf.

Integrated Photoresponsive Alkaline Earth Metal Coordination Networks: Synthesis, Topology, Photochromism and Photoluminescence Investigation

Photoresponsive materials are a key part of the age of smart technology that have potential in a broad range of applications. Coordination networks (CNs) are widely used due to their designability and stability. In this work, three novel alkaline earth metal coordination networks (AEM-CNs): [Mg(CMNDI)(H₂ O)₂ ], [Ca(CMNDI)(H₂ O)₂ ]⋅H₂ O, and [Sr(CMNDI)(H₂ O)(DMF)] with fsl, cds, and scn topology nets were synthetized via N,N'-bis(carboxymethyl)-1,4,5,8-naphthalenediimide (H₂ CMNDI); the scn net is not found in the Reticular Chemistry Structure Resource or ToposPro. The reusable and sensitive photochromic properties of the three CNs enable them to be used as secret inks or ultraviolet detectors. In addition, the CNs also exhibited reusable photoluminescent turn-off toward the drug molecules, balsalazide disodium (Bal.) and colchicine (Col.), with good limits of detection of 0.16 and 0.70 μM. To the best of our knowledge, this is the first study of a fluorescence sensor for Bal. Thus, the AEM-CNs provide a design idea for integrated photoresponsive materials that could be further improved in the near future by further study.

Beyond structural motifs: the frontier of actinide-containing metal-organic frameworks

In this perspective, we feature recent advances in the field of actinide-containing metal-organic frameworks (An-MOFs) with a main focus on their electronic, catalytic, photophysical, and sorption properties. This discussion deviates from a strictly crystallographic analysis of An-MOFs, reported in several reviews, or synthesis of novel structural motifs, and instead delves into the remarkable potential of An-MOFs for evolving the nuclear waste administration sector. Currently, the An-MOF field is dominated by thorium- and uranium-containing structures, with only a few reports on transuranic frameworks. However, some of the reported properties in the field of An-MOFs foreshadow potential implementation of these materials and are the main focus of this report. Thus, this perspective intends to provide a glimpse into the challenges, triumphs, and future directions of An-MOFs in sectors ranging from the traditional realm of gas sorption and separation to recently emerging areas such as electronics and photophysics.

Synthesis of luminescent thorium-based metal-organic frameworks with 1,2,4,5-tetrakis(4-carboxyphenyl)benzene

Three new thorium-based MOFs based on 1,2,4,5-tetrakis(4-carboxyphenyl)benzene (H4TCPB) were obtained under a similar reaction system (metal salt, ligand, solvent, and acid are the same). Th(iv) forms the central unit of the MOFs in mononuclear and binuclear clusters, respectively. All the MOFs show blue ligand-based luminescence under an ultraviolet environment. This is the first time that multiple thorium-based MOFs with luminescence have been found with the same ligand.

Three new thorium-based MOFs based on 1,2,4,5-tetrakis(4-carboxyphenyl)benzene (H4TCPB) were obtained under a similar reaction system (metal salt, ligand, solvent, and acid are the same).

Structural Evolution from Noninterpenetrated to Interpenetrated Thorium-Organic Frameworks Exhibiting High Propyne Storage

Two thorium-organic frameworks of [Th₆O₄(OH)₄(TFBPDC)₆(H₂O)₆]_n (Th-TFBPDC) and [Th₆O₄(OH)₄(TFBPDC)₄(HCOO)₄(H₂O)₆]_n (Th-TFBPDC-i) constructed from the 3,3',5,5'-tetrakis(fluoro)biphenyl-4,4'-dicarboxylate (TFBPDC^2-) ligand were obtained in a reaction. At an early stage of the reaction, the formation of the three-dimensional (3D) framework of Th-TFBPDC was discovered. At a later stage of the reaction, the complete product of Th-TFBPDC-i was obtained. The structural evolution from a noninterpenetrated network of Th-TFBPDC to a 2-fold interpenetrated network of Th-TFBPDC-i is a dissolution-recrystallization process and rationalized as the four equatorial TFBPDC^2- ligands in an octahedral [Th₆O₄(OH)₄(TFBPDC)₁₂] unit were displaced by four formate ligands to form a [Th₆O₄(OH)₄(TFBPDC)₈(HCOO)₄] unit via a ligand substitution reaction. The large pore volume as well as the strong interactions between the host framework and guest propyne (C₃H₄) molecules demonstrated by computational results endow the highly water-stable Th-TFBPDC with the best-performing C₃H₄ storage under ambient conditions. This work presents a rare example of structural evolution from a 3D noninterpenetrated network to a 2-fold 3D interpenetrated network and a highly promising metal-organic framework (MOF) for C₃H₄ storage with a C₃H₄ uptake of 8.16 mmol g^-1 at 298 K.

Interpenetration Control in Thorium Metal-Organic Frameworks: Structural Complexity toward Iodine Adsorption

The rational design and synthesis of metal-organic frameworks with well-controlled interpenetration have been active research areas of inquiry, particularly for porosity-related applications. Herein, we extend the use of the ligand steric modulation strategy to initiate the first study of the interpenetration control of thorium-based MOFs. The approximate "hardness" of the Th⁴⁺ cation, which was conjugated with aromatic substitutions and delicately modified synthetic conditions, allows for the crystallization of single crystals of seven new Th-MOFs with five distinct topologies. Solvothermal reactions of Th(NO₃)₄ with the triphenyl H₂TPDC ligand under variable conditions exclusively gave rise to an interpenetrated Th-MOF with a hex topology, namely Th-SINAP-16. Modifications of the ligand sterics with two pendant methyl groups to 2',5'-Me₂TPDC^2- and 2,2″-Me₂TPDC^2- afforded two noninterpenetrated UiO-68-type Th-MOFs (Th-SINAP-17 and Th-SINAP-20, respectively) with record-high pore volumes (74.8% and 75.3%, respectively) among all the thorium MOFs. Moreover, another four Th-MOFs Th-SINAP-n (n = 18, 19, 21, and 22) with three different topologies were obtained by a simple synthetic modulation. Notably, Th-SINAP-16 and Th-SINAP-21 represent the second rare examples of interpenetrated Th-MOFs reported to date. These findings revealed the unprecedented structural complexity and synthetic accessibility of Th-MOFs among all tetravalent metal containing MOFs. Such features make Th-MOFs as an ideal platform to elucidate the structure-property relationship for various applications, e.g. iodine adsorption.

Enhanced Adsorption and Separation of Xenon over Krypton via an Unsaturated Calcium Center in a Metal-Organic Framework

Krypton (Kr) and xenon (Xe) are nowadays widely applied in technical and industrial fields. Separating and collecting highly pure Xe from nuclear facilities are necessary and urgent. However, the technology is limited due to the inert nature of Xe and other interferential factors. In this work, a calcium-based metal-organic framework, Ca-SINAP-1, which comprises a three-dimensional microporous framework with a suitable pore width, was researched for xenon and krypton separation through both experimental and theoretical methods. Ca-SINAP-1, synthesized in solvothermal and gamma ray conditions, features accessible open-metal sites, exhibits a high Xe/Kr selectivity of 10.32, and owns a Xe adsorption capacity of 2.87 mmol/g at room temperature (1.0 bar). Particularly, its excellent chemical stability (from pH 2 to 13) and thermal stability (up to 550 °C), as well as radiation-resistance (up to 400 kGy β irradiations), render this material a promising candidate for radioactive inert gases treatment.

Tuning of the Network Dimensionality and Photoluminescent Properties in Homo- and Heteroleptic Lanthanide Coordination Polymers

Targeted synthesis, through a heteroleptic methodology, has resulted in three types of lanthanide (Ln) coordination polymers (CPs) with tailored dimensionality, tunable photoluminescent colors, and distinct luminescence quenching upon UV and X-ray irradiation. The homoleptic Ln(tpbz)(NO₃)₂ [CP-1; tpbz = 4-(2,2':6',2″-terpyridin-4'-yl)benzoate] is assembled from Ln cations and bridging tpbz ligands, accompanied by the decoration of NO₃^- anions, forming a one-dimensional (1D) chain structure. The presence of ancillary dicarboxylate linkers, 1,4-benzenedicarboxylate (bdc) and 2,5-thiophenedicarboxylate (tdc), promotes additional bridging between 1D chains to form a two-dimensional layer and a three-dimensional framework for Ln(tpbz)(bdc) (CP-2) and Ln(tpbz)(tdc) (CP-3), respectively. The multicolor and luminescence properties of the obtained CPs were investigated, displaying typical red Eu^III-based and green Tb^III-based emissions. The Sm^III-bearing CP-1-CP-3, however, exhibit diverse ratiometric Ln^III- and ligand-based emissions, with the photoluminescent colors varying from pink to orange to cyan. Notably, the Tb^III-containing CP-1-CP-3 display distinct luminescence quenching upon continuous exposure to UV and X-ray irradiation. To our best knowledge, CP-2-Tb represents one of the most sensitive UV dosage probes (3.2 × 10^-7 J) among all CPs.

Rapid iodine adsorption from vapor phase and solution by a nitrogen-rich covalent piperazine–triazine-based polymer

The excellent pore performance and high nitrogen content of n-CTP result in increased diffusion and adsorption of I₂, which subsequently decreases the equilibrium time.

Polypropylene/Polyvinyl Alcohol/Metal-Organic Framework-Based Melt-Blown Electrospun Composite Membranes for Highly Efficient Filtration of PM2.5

Particulate matter 2.5 (PM2.5) has become a public hazard to people's lives and health. Traditional melt-blown membranes cannot filter dangerous particles due to their limited diameter, and ultra-fine electrospinning fibers are vulnerable to external forces. Therefore, creating highly efficient air filters by using an innovative technique and structure has become necessary. In this study, a combination of polypropylene (PP) melt-blown and polyvinyl alcohol (PVA)/zeolite imidazole frameworks-8 (ZIF-8) electrospinning technique is employed to construct a PP/PVA/ZIF-8 membrane with a hierarchical fibrous structure. The synergistic effect of hierarchical fibrous structure and ZIF-8 effectively captures PM2.5. The PP/PVA composite membrane loaded with 2.5% loading ZIF-8 has an average filtration efficacy reaching as high as 96.5% for PM2.5 and quality factor (Qf) of 0.099 Pa-1. The resultant membrane resists 33.34 N tensile strength and has a low pressure drop, excellent filtration efficiency, and mechanical strength. This work presents a facile preparation method that is suitable for mass production and the application of membranes to be used as air filters for highly efficient filtration of PM2.5.