Single-atom catalysts boost signal amplification for biosensing

The Identification of Oral Cariogenic Bacteria through Colorimetric Sensor Array Based on Single-Atom Nanozymes

Effective identification of multiple cariogenic bacteria in saliva samples is important for oral disease prevention and treatment. Here, a simple colorimetric sensor array is developed for the identification of cariogenic bacteria using single-atom nanozymes (SANs) assisted by machine learning. Interestingly, cariogenic bacteria can increase oxidase-like activity of iron (Fe)─nitrogen (N)─carbon (C) SANs by accelerating electron transfer, and inversely reduce the activity of Fe─N─C further reconstruction with urea. Through machine-learning-assisted sensor array, colorimetric responses are developed as "fingerprints" of cariogenic bacteria. Multiple cariogenic bacteria can be well distinguished by linear discriminant analysis and bacteria at different genera can also be distinguished by hierarchical cluster analysis. Furthermore, colorimetric sensor array has demonstrated excellent performance for the identification of mixed cariogenic bacteria in artificial saliva samples. In view of convenience, precise, and high-throughput discrimination, the developed colorimetric sensor array based on SANs assisted by machine learning, has great potential for the identification of oral cariogenic bacteria so as to serve for oral disease prevention and treatment.

Cu Single-Atom Nanozyme-Mediated Electrochemiluminescence Biosensor for Highly Sensitive Detection of MicroRNA-622

MicroRNA (miRNA) detection is a critical aspect of disease diagnosis, and recent studies indicate that miRNA-622 could be a potential target for lung cancer. Herein, Cu single atoms were anchored on graphitic carbon nitride (Cu SAs@CN) as a coreaction accelerator applied in luminol-H2O2 system, thereby establishing an efficient and sensitive electrochemiluminescence (ECL) biosensor for miRNA-622 detection. Cu SAs@CN was explored to possess excellent enzyme-like activities that promote the generation of abundant reactive oxygen species, which amplified ECL emission. Meanwhile, in order to improve the accuracy and sensitivity for miRNA-622 detection, the highly specific trans-cleavage ability of CRISPR/Cas12a was combined with a catalytic hairpin assembly strategy. Therefore, an ECL biosensor for miRNA-622 detection was systematically constructed as a proof of concept, achieving an ultralow limit of detection of 1.09 fM, and the feasibility was demonstrated in human serum samples. The findings of this research provide a promising strategy to enhance the ECL response using versatile single-atom catalysts, thus advancing the development of ECL biosensing applications.

Single Atom Engineering for Nanorobotics

The fields of single atom engineering represent cutting-edge areas in nanotechnology and materials science, pushing the boundaries of how small we can go in engineering functional devices and materials. Nanorobots, or nanobots, are robotic systems scaled down to the nanometer level and designed to perform tasks at similarly small scales. Single atom engineering, on the other hand, involves manipulating individual atoms to create precise materials and devices with controlled properties and functionalities. By integrating single atom engineering into nanorobotics, we unlock the potential to enable the precise incorporation of multiple functionalities onto these minuscule machines with nanometer-level precision. In this perspective, we describe the nascent field of single atom engineering in nanorobotics.

Bioinspired Core-shell nanospheres integrated in multi-signal immunochromatographic sensor for high throughput sensitive detection of Bongkrekic acid in food

Nowadays, notable progress has been achieved in detecting foodborne toxins by employing nanoenzyme-based lateral flow immunoassay (NLFIA) sensors in point-of-care testing (POCT). It continues to be a major challenge to maximize the enzyme-like performance of nanozymes for educe any potential uncertainties in catalytic process. In this study, we employed a facile and efficient self-assembly approach to fabricate nucleoid-shell structured biomimetic nanospheres CuS@Au-Pt (CAP), which demonstrates enhanced brightness of the colorimetric signal, excellent affinity, and excellent peroxidase activity. The integration of CAP with a competitive-assay NLFIA platform enabled sensitive immunochromatographic detection of bongkrekic acid (BA), with LOD as low as 0.66 ng/mL. After signal amplification through enzyme-like reaction, the detection range was extended around 1-fold. Additionally, CAP-NLFIA effectively detected BA with a recovery rate of 80.96-119.36% for real samples. The study proposes using CAP as a signal reporter in a dual-readout LFIA, which can establish a high throughput sensitive detection platform.

Axial O Atom-Modulated Fe(III)-N4 Sites for Enhanced Cascade Catalytic 1O2-Induced Tumor Therapy

The rational construction of efficient hypoxia-tolerant nanocatalysts capable of generating singlet oxygen (1O2) without external stimuli is of great importance for tumor therapy. Herein, uniformly dispersed and favorable biosafety profile graphitic carbon nitride quantum dots immobilized with Fe-N4 moieties modulated by axial O atom (denoted as O-Fe-N4) are developed for converting H2O2 into 1O2 via Russell reaction, without introducing external energy. Notably, O-Fe-N4 performs two interconnected catalytic properties: glutathione oxidase-mimic activity to provide substrate for subsequent 1O2 generation, avoiding the blunting anticancer efficacy by glutathione. The O-Fe-N4 catalyst demonstrates a specific activity of 79.58 U mg-1 at pH 6.2, outperforming the most reported Fe-N4 catalysts. Density functional theory calculations demonstrate that the axial O atom can effectively modulate the relative position and electron affinity between Fe and N, lowering the activation energy, strengthening the selectivity, and thus facilitating the Russell-type reaction. The gratifying enzymatic activity stemming from the well-defined Fe-N/O structure can inhibit tumor proliferation by efficiently downregulating glutathione peroxidase 4 activity and inducing lipid peroxidation. Altogether, the O-Fe-N4 catalyst not only represents an efficient platform for self-cascaded catalysis to address the limitations of 1O2-involved cancer treatment but also provides a paradigm to enhance the performance of the Fe-N4 catalyst.

Dual-recognition colorimetric platform based on porous Au@Pt nanozymes for highly sensitive washing-free detection of Staphylococcus aureus

A dual-recognition strategy is reported to construct a one-step washing and highly efficient signal-transduction tag system for high-sensitivity colorimetric detection of Staphylococcus aureus (S. aureus). The porous (gold core)@(platinum shell) nanozymes (Au@PtNEs) as the signal labels show highly efficient peroxidase mimetic activity and are robust. For the sake of simplicity the detection involved the use of a vancomycin-immobilized magnetic bead (MB) and aptamer-functionalized Au@PtNEs for dual-recognition detection in the presence of S. aureus. In addition, we designed a magnetic plate to fit the 96-well microplate to ensure consistent magnetic properties of each well, which can quickly remove unreacted Au@PtNEs and sample matrix while avoiding tedious washing steps. Subsequently, Au@PtNEs catalyze hydrogen peroxide (H2O2) to oxidize 3,3',5,5'-tetramethylbenzidine (TMB) generating a color signal. Finally, the developed Au@PtNEs-based dual-recognition washing-free colorimetric assay displayed a response in the range of S. aureus of 5 × 101-5 × 105 CFU/mL, and the detection limit was 40 CFU/mL within 1.5 h. In addition, S. aureus-fortified samples were analyzed to further evaluate the performance of the proposed method, which yielded average recoveries ranging from 93.66 to 112.44% and coefficients of variation (CVs) within the range 2.72-9.01%. These results furnish a novel horizon for the exploitation of a different mode of recognition and inexpensive enzyme-free assay platforms as an alternative to traditional enzyme-based immunoassays for the detection of other Gram-positive pathogenic bacteria.

Catalase-like Fe Nanoparticles and Single Atoms Catalysts with Boosted Activity and Stability of Oxygen Reduction for Pesticide Detection

Although oxygen reduction reaction (ORR) as an effective signal amplification strategy has been extensively investigated for the improvement of sensitivity of electrochemical sensors, their activity and stability are still a great challenge. Herein, single-atom Fe (FeSA) and Fe nanoparticles (FeNP) on nitrogen-doped carbon (FeSA/FeNP) catalysts demonstrate a highly active and stable ORR performance, thus achieving the sensitive and stable electrochemical sensing of organophosphorus pesticides (OPs). Experimental investigations indicate that FeNP in FeSA/FeNP can improve the ORR activity by adjusting the electronic structure of FeSA active sites. Besides, owing to the excellent catalase-like activity, FeSA/FeNP can rapidly consume in situ generated H2O2 in the ORR process and avoid the leakage of active sites, thereby improving the stability of ORR. Utilizing the excellent ORR performance of FeSA/FeNP, an electrochemical sensor for OPs is established based on the thiocholine-induced poison of the active sites, demonstrating satisfactory sensitivity and stability. This work provides new insight into the design of high performance ORR catalysts for sensitive and stable electrochemical sensing.

Boosting Electrochemiluminescence Performance of a Dual-Active Site Iron Single-Atom Catalyst-Based Luminol-Dissolved Oxygen System via Plasmon-Induced Hot Holes

Due to the commonly low content of biomarkers in diseases, increasing the sensitivity of electrochemiluminescence (ECL) systems is of great significance for in vitro ECL diagnosis and biodetection. Although dissolved O2 (DO) has recently been considered superior to H2O2 as a coreactant in the most widely used luminol ECL systems owing to its improved stability and less biotoxicity, it still has unsatisfactory ECL performance because of its ultralow reactivity. In this study, an effective plasmonic luminol-DO ECL system has been developed by complexing luminol-capped Ag nanoparticles (AgNPs) with plasma-treated Fe single-atom catalysts (Fe-SACs) embedded in graphitic carbon nitride (g-CN) (pFe-g-CN). Under optimal conditions, the performance of the resulting ECL system could be markedly increased up to 1300-fold compared to the traditional luminol-DO system. Further investigations revealed that duple binding sites of pFe-g-CN and plasmonically induced hot holes that disseminated from AgNPs to g-CN surfaces lead to facilitate significantly the luminous reaction process of the system. The proposed luminol-DO ECL system was further employed for the stable and ultrasensitive detection of prostate-specific antigen in a wide linear range of 1.0 fg/mL to 1 μg/mL, with a pretty low limit of detection of 0.183 fg/mL.

Large-Scale Synthesis of High-Loading Single Metallic Atom Catalysts by a Metal Coordination Route

Single atom catalyst (SAC) is one of the most efficient and versatile catalysts with well-defined active sites. However, its facile and large-scale preparation, the prerequisite of industrial applications, has been very challenging. This dilemma originates from the Gibbs-Thomson effect, which renders it rather difficult to achieve high single atom loading (< 3 mol%). Further, most synthesizing procedures are quite complex, resulting in significant mass loss and thus low yields. Herein, a novel metal coordination route is developed to address these issues simultaneously, which is realized owing to the rapid complexation between ligands (e.g., biuret) and metal ions in aqueous solutions and subsequent in situ polymerization of the formed complexes to yield SACs. The whole preparation process involves only one heating step operated in air without any special protecting atmospheres, showing general applicability for diverse transition metals. Take Cu SAC for an example, a record yield of up to 3.565 kg in one pot and an ultrahigh metal loading 16.03 mol% on carbon nitride (Cu/CN) are approached. The as-prepared SACs are demonstrated to possess high activity, outstanding selectivity, and robust cyclicity for CO2 photoreduction to HCOOH. This research explores a robust route toward cost-effective, massive production of SACs for potential industrial applications.

Atomically Co-dispersed nitrogen-doped carbon for sensitive electrochemical immunoassay of breast cancer biomarker CA15-3

The development of an ultrasensitive and precise measurement of a breast cancer biomarker (cancer antigen 15-3; CA15-3) in complex human serum is essential for the early diagnosis of cancer in groups of healthy populations and the treatment of patients. However, currently available testing technologies suffer from insufficient sensitivity toward CA15-3, which severely limits early large-scale screening of breast cancer patients. We report a versatile electrochemical immunoassay method based on atomically cobalt-dispersed nitrogen-doped carbon (Co-NC)-modified disposable screen-printed carbon electrode (SPCE) with alkaline phosphatase (ALP) and its metabolite, ascorbic acid 2-phosphate (AAP), as the electrochemical labeling and redox signaling unit for sensitive detection of low-abundance CA15-3. During electrochemical detection by differential pulse voltammetry (DPV), it was found that the Co-NC-SPCE electrode did not have a current signal response to the AAP substrate; however, it had an extremely favorable response current to ascorbic acid (AA). Based on the above principle, the target CA15-3-triggered immunoassay enriched ALP-catalyzed AAP produces a large amount of AA, resulting in a significant change in the system current signal, thereby realizing the highly sensitive detection of CA15-3. Under the optimal AAP substrate concentration and ALP catalysis time, the Co-NC-SPCE-based electrochemical immunoassay demonstrated a good DPV current for CA15-3 in the assay interval of 1.0 mU/mL to 10,000 mU/mL, with a calculated limit of detection of 0.38 mU/mL. Since Co-NC-SPCE has an excellent DPV current response to AA and employs split-type scheme, the constructed electrochemical immunoassay has the merits of high preciseness and anti-interference, and its clinical diagnostic results are comparable to those of commercial kits.

Ultrasensitive cortisol electrochemical immunosensor amplifying by Au single-atom nanozymes and HRP enzymes

Cortisol, a corticosteroid hormone as a primary stress hormone response to internal and external stress, has been regarded as a gold standard reliable biomarker to evaluate human mental stress. The double enzymes strategy, using nanozyme and enzyme amplifying the electrochemical signal, has been widely used to improve the performance of electrochemical biosensors. An ultra-sensitive electrochemical cortisol sensor based on Au single-atom nanozymes had been fabricated through HRP labeled anti-cortisol antibody binding with Au by Au-S bond. Based on the high catalytic activity of Au single-atom nanozymes and the high selectivity of HRP-labeled anti-cortisol antibodies, the cortisol electrochemical sensor-based Au single-atom nanozymes had an excellent response to cortisol, such as high electrochemical activity, high sensitivity, high selectivity, and wide linear range (0.15-300 ng mL-1) and low detection (0.48 pg mL-1) through the four-parameter logistic model with 95% confidence. The electrochemical cortisol sensor was used to determine the cortisol concentration of human saliva at different times.

Cytosine-Rich Oligonucleotide and Electrochemically Reduced Graphene Oxide Nanocomposite for Ultrasensitive Electrochemical Ag+ Sensing

Silver ions (Ag+) are crucial in various fields, but pose environmental and health risks at high concentrations. This study presents a straightforward approach for the ultra-trace detection of Ag+, utilizing a composite of a cytosine-rich oligonucleotide (CRO) and an electrochemically reduced graphene oxide (ERGO). Initially, ERGO was synthesized on a glassy carbon electrode (GCE) through the reduction of graphene oxide (GO) via cyclic voltammetry. A methylene blue-tagged CRO (MB-CRO) was then anchored to the ERGO surface through π-π interactions, resulting in the formation of an MB-CRO-modified ERGO electrode (MB-CRO/ERGO-GCE). The interaction with Ag+ ions induced the formation of silver-mediated C-Ag+-C coordination, prompting the MB-CRO to adopt a hairpin structure. This conformational change led to the desorption of the MB-CRO from the ERGO-GCE, causing a variation in the redox current of the methylene blue associated with the MB-CRO. Electrochemical assays revealed that the sensor exhibits extraordinary sensitivity to Ag+ ions, with a linear detection range from 1 femtomolar (fM) to 100 nanomolars (nM) and a detection limit of 0.83 fM. Moreover, the sensor demonstrated high selectivity for Ag+ ions and several other benefits, including stability, reproducibility, and straightforward fabrication and operational procedures. Additionally, real sample analyses were performed using the modified electrode to detect Ag+ in tap and pond water samples, yielding satisfactory recovery rates.

Gold nanoclusters-based fluorescence sensor array for herbicides qualitative and quantitative analysis

Herbicides have been extensively used around the world, which poses a potential hazard to humans and wildlife. Accurate detection of herbicides is crucial for the environment and human health. Herein, a simple and sensitive fluorescence sensor array was constructed for discrimination and identification of herbicides. Fluorescent gold nanoclusters modified with 11-mercaptoundecanoic acid or reduced glutathione were prepared, respectively. Metal ions quenched the fluorescence of nanoclusters through coordination and leading to the aggregation of gold nanoclusters. The addition of auxin herbicides (2,4-dichlorophenoxyacetic acid, 2-methyl-4-chlorophenoxyacetic acid, decamba, picloram, quinclorac) restored the fluorescence of nanoclusters with different degrees. The mechanism study showed auxin herbicides can bind with metal ions and re-disperse the gold nanoclusters from the aggregation state. The "on-off-on" fluorescent sensor array was constructed basic on above detection mechanism. Combined with principal component analysis (PCA) and hierarchical cluster analysis (HCA) methods, auxin herbicides are well separated on 2D/3D PCA score plots and HCA dendrogram in the range of 40-500 μm. In addition, the fluorescence sensor array performed successful in detecting real samples and blind samples. The developed sensor system shows a promising in practical detection of herbicides.

Nanozyme-Enhanced Electrochemical Biosensors: Mechanisms and Applications

Nanozymes, as innovative materials, have demonstrated remarkable potential in the field of electrochemical biosensors. This article provides an overview of the mechanisms and extensive practical applications of nanozymes in electrochemical biosensors. First, the definition and characteristics of nanozymes are introduced, emphasizing their significant role in constructing efficient sensors. Subsequently, several common categories of nanozyme materials are delved into, including metal-based, carbon-based, metal-organic framework, and layered double hydroxide nanostructures, discussing their applications in electrochemical biosensors. Regarding their mechanisms, two key roles of nanozymes are particularly focused in electrochemical biosensors: selective enhancement and signal amplification, which crucially support the enhancement of sensor performance. In terms of practical applications, the widespread use of nanozyme-based electrochemical biosensors are showcased in various domains. From detecting biomolecules, pollutants, nucleic acids, proteins, to cells, providing robust means for high-sensitivity detection. Furthermore, insights into the future development of nanozyme-based electrochemical biosensors is provided, encompassing improvements and optimizations of nanozyme materials, innovative sensor design and integration, and the expansion of application fields through interdisciplinary collaboration. In conclusion, this article systematically presents the mechanisms and applications of nanozymes in electrochemical biosensors, offering valuable references and prospects for research and development in this field.

Current Advances on the Single-Atom Nanozyme and Its Bioapplications

Nanozymes, a class of nanomaterials mimicking the function of enzymes, have aroused much attention as the candidate in diverse fields with the arbitrarily tunable features owing to the diversity of crystalline nanostructures, composition, and surface configurations. However, the uncertainty of their active sites and the lower intrinsic deficiencies of nanomaterial-initiated catalysis compared with the natural enzymes promote the pursuing of alternatives by imitating the biological active centers. Single-atom nanozymes (SAzymes) maximize the atom utilization with the well-defined structure, providing an important bridge to investigate mechanism and the relationship between structure and catalytic activity. They have risen as the new burgeoning alternative to the natural enzyme from in vitro bioanalytical tool to in vivo therapy owing to the flexible atomic engineering structure. Here, focus is mainly on the three parts. First, a detailed overview of single-atom catalyst synthesis strategies including bottom-up and top-down approaches is given. Then, according to the structural feature of single-atom nanocatalysts, the influence factors such as central metal atom, coordination number, heteroatom doping, and the metal-support interaction are discussed and the representative biological applications (including antibacterial/antiviral performance, cancer therapy, and biosensing) are highlighted. In the end, the future perspective and challenge facing are demonstrated.

Effect of Phosphorus Modulation in Iron Single-Atom Catalysts for Peroxidase Mimicking

Fe-N-C single-atom catalysts (SACs) exhibit excellent peroxidase (POD)-like catalytic activity, owing to their well-defined isolated iron active sites on the carbon substrate, which effectively mimic the structure of natural peroxidase's active center. To further meet the requirements of diverse biosensing applications, SAC POD-like activity still needs to be continuously enhanced. Herein, a phosphorus (P) heteroatom is introduced to boost the POD-like activity of Fe-N-C SACs. A 1D carbon nanowire (FeNCP/NW) catalyst with enriched Fe-N4 active sites is designed and synthesized, and P atoms are doped in the carbon matrix to affect the Fe center through long-range interaction. The experimental results show that the P-doping process can boost the POD-like activity more than the non-P-doped one, with excellent selectivity and stability. The mechanism analysis results show that the introduction of P into SAC can greatly enhance POD-like activity initially, but its effect becomes insignificant with increasing amount of P. As a proof of concept, FeNCP/NW is employed in an enzyme cascade platform for highly sensitive colorimetric detection of the neurotransmitter acetylcholine.

A sea urchin-shaped nanozyme mediated dual-mode immunoassay nanoplatform for sensitive point-of-care testing histamine in food samples

Rapid detection of histamine remains a challenge due to the complexity of food matrices. Based on the high peroxidase-like activity of sea urchin-shaped Pt@Au NPs (SU-Pt@Au NPs), a novel dual-mode nanoplatform is developed for the sensitive detection of histamine utilizing an indirect competitive enzyme-linked immunosorbent assay. According to the colorimetric-based UV-vis nanoplatform, histamine is sensitively detected with a liner range from 0.5 to 100 ng/mL and a limit of detection (LOD) as low as 0.3 ng/mL. Then, a smartphone-loaded color picker APP can intelligently detect histamine in point-of-care testing (POCT) based on the R/B ratio of the color channels, with a detection range of 0.5 to 1000 ng/mL and a LOD as low as 0.15 ng/mL, significantly expanding the detection range. Such an easy-to-use and sensitive detection system is employed to quantify histamine in Pacific saury, crab, and pork samples, indicating outstanding application potential in protein-rich meat food safety.

Construction of Multi-Mode Photoelectrochemical Immunoassays for Accurate Detection of Cancer Markers: Assisted with MOF-Confined Plasmonic Nanozyme

In clinical diagnostics, sensitive and accurate biomarker monitoring is greatly challenged by the limitations of false positive/negative errors in single-modal photoelectrochemical analysis. Herein, we propose a multimode immunoassay by integrating photoelectrochemical, colorimetric, and photothermal imaging analysis into one electrode. The immunosensors could simultaneously achieve three detection modes at one electrode, which provided a new pathway for the accurate detection of the target prostate-specific antigen (PSA) and circumvented false-positive or negative errors during the detection process. To this end, an integrated multifunctional chip (TiO2/ZIF-8/Cu(II)) was first constructed via in situ embedding of Cu(II) in the Metal-organic framework growth process. Then, an alkaline phosphatase-labeled magnetic probe was designed to achieve split-type detection for PSA. In a sodium thiophosphate solution, the in situ generated H2S could react with Cu(II) to form small-size CuS due to the nanoconfinement of ZIF-8 and thus result in the formation of p-n heterojunctions (TiO2/ZIF-8/CuS). The TiO2/ZIF-8/CuS could efficiently improve the light-harvesting ability and facilitate the charge separation efficiency, thus finally resulting in an increased photocurrent in the PEC mode. Furthermore, by constructing the portable colorimetric and photothermal sensors based on the Arduino microcontroller and photothermal imager, the TiO2/ZIF-8/CuS also provided point-of-care and visual detection modes, as the in situ-formed CuS exhibited peroxidase-mimicking activity and outstanding photothermal properties. The work had important prospects for establishing multimode immunoassays for the accurate detection of cancer markers in early disease diagnosis.

Single-atom iron boosts electrochemiluminescence for ultrasensitive carcinoembryonic antigen detection

A simple and ultrasensitive sandwich-type electrochemiluminescence (ECL) immunosensor has been developed using porous three-dimensional gold nanoparticles (Au NPs) iron(Fe)-zinc(Zn) metal-organic frameworks (Au NPs-FeZn-MOFs@luminol) as high-efficiency ECL signal probes with Fe single-atom catalysts (SACs) (Fe-N-C SACs) as potentially advanced coreaction accelerators and dissolved oxygen as a coreaction agent to realize an H2O2-free amplification method for detecting carcinoembryonic antigen (CEA). The cathodic ECL of luminol, which was usually negligible, increased first. Because the Fe-N-C SACs exhibited an outstanding catalytic performance and a unique electronic structure, different reactive oxygen species (ROS) were generated via the oxygen reduction reaction. ROS oxidized the luminol anions to luminol anion radicals, preventing the time-consuming luminol electrochemical oxidation. Furthermore, the luminol anion radicals generated in situ reacted with ROS to produce potent cathodic ECL emissions. The immunosensor exhibited favorable analytical accuracy (detection range: 0.1 pg mL-1 - 80 ng mL-1), and its detection limit for serum samples was 0.031 pg mL-1 (S/N = 3). Consequently, the proposed strategy offers a new approach for early screening of CEA.

Atomic-level design of metalloenzyme-like active pockets in metal-organic frameworks for bioinspired catalysis

Natural metalloenzymes with astonishing reaction activity and specificity underpin essential life transformations. Nevertheless, enzymes only operate under mild conditions to keep sophisticated structures active, limiting their potential applications. Artificial metalloenzymes that recapitulate the catalytic activity of enzymes can not only circumvent the enzymatic fragility but also bring versatile functions into practice. Among them, metal-organic frameworks (MOFs) featuring diverse and site-isolated metal sites and supramolecular structures have emerged as promising candidates for metalloenzymes to move toward unparalleled properties and behaviour of enzymes. In this review, we systematically summarize the significant advances in MOF-based metalloenzyme mimics with a special emphasis on active pocket engineering at the atomic level, including primary catalytic sites and secondary coordination spheres. Then, the deep understanding of catalytic mechanisms and their advanced applications are discussed. Finally, a perspective on this emerging frontier research is provided to advance bioinspired catalysis.

Gold single atom-based aptananozyme as an ultrasensitive and selective colorimetric probe for detection of thrombin and C-reactive protein

An ultra-efficient biocatalytic peroxidase-like Au-based single-atom nanozyme (Au-SAzymes) has been synthesized from isolated Au atoms on black nitrogen doped carbon (Au-N-C) using a simple complexation-adsorption-pyrolysis method. The atomic structure of AuN4 centers in black carbon was revealed by combined high-resolution transmission electron microscopy/high-angle annular dark-field scanning transmission electron microscopy. The Au-SAzymes showed a remarkable peroxidase activity with 1.7 nM as Michaelis-Menten constant, higher than most previously reported SAzyme activity. Density functional theory and Monte Carlo calculations revealed the adsorption of H2O2 on AuN4 with formation of OH* and O*. Molecular recognition was greatly enhanced via label-free integration of thiol-terminal aptamers on the surface of single Au atoms (Aptamer/Au-SAzyme) to design off-on ultrasensitive aptananozyme-based sensor for detecting thrombin and CRP with 550 pM and 500 pg mL-1 limits of detection, respectively. The Aptamer/Au-SAzyme showed satisfactory accuracy and precision when applied to the serum and plasma of COVID-19 patients. Due to the maximum Au atom utilization, approximately 3636 samples can be run per 1 mg of gold, highlighting the commercialization potential of the developed Aptamer/Au-SAzyme approach.

On-site airborne pathogen detection for infection risk mitigation

Human-infecting pathogens that transmit through the air pose a significant threat to public health. As a prominent instance, the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) that caused the COVID-19 pandemic has affected the world in an unprecedented manner over the past few years. Despite the dissipating pandemic gloom, the lessons we have learned in dealing with pathogen-laden aerosols should be thoroughly reviewed because the airborne transmission risk may have been grossly underestimated. From a bioanalytical chemistry perspective, on-site airborne pathogen detection can be an effective non-pharmaceutic intervention (NPI) strategy, with on-site airborne pathogen detection and early-stage infection risk evaluation reducing the spread of disease and enabling life-saving decisions to be made. In light of this, we summarize the recent advances in highly efficient pathogen-laden aerosol sampling approaches, bioanalytical sensing technologies, and the prospects for airborne pathogen exposure measurement and evidence-based transmission interventions. We also discuss open challenges facing general bioaerosols detection, such as handling complex aerosol samples, improving sensitivity for airborne pathogen quantification, and establishing a risk assessment system with high spatiotemporal resolution for mitigating airborne transmission risks. This review provides a multidisciplinary outlook for future opportunities to improve the on-site airborne pathogen detection techniques, thereby enhancing the preparedness for more on-site bioaerosols measurement scenarios, such as monitoring high-risk pathogens on airplanes, weaponized pathogen aerosols, influenza variants at the workplace, and pollutant correlated with sick building syndromes.

An emerging direction for nanozyme design: from single-atom to dual-atomic-site catalysts

Nanozymes, a new class of functional nanomaterials with enzyme-like characteristics, have recently made great achievements and have become potential substitutes for natural enzymes. In particular, single-atomic nanozymes (Sazymes) have received intense research focus on account of their versatile enzyme-like performances and well-defined spatial configurations of single-atomic sites. More recently, dual-atomic-site catalysts (DACs) containing two neighboring single-atomic sites have been explored as next-generation nanozymes, thanks to the flexibility in tuning active sites by various combinations of two single-atomic sites. This minireview outlines the research progress of DACs in their synthetic approaches and the latest characterization techniques highlighting a series of representative examples of DAC-based nanozymes. In the final remarks, we provide current challenges and perspectives for developing DAC-based nanozymes as a guide for researchers who would be interested in this exciting field.

Phosphorescence Enzyme-Mimics for Time-Resolved Sensitive Diagnostics and Environment-Adaptive Specific Catalytic Therapeutics

Enzyme mimics (EMs) with intrinsic catalysis activity have attracted enormous interest in biomedicine. However, there is a lack of environmentally adaptive EMs for sensitive diagnosis and specific catalytic therapeutics in simultaneous manners. Herein, the coordination modulation strategy is designed to synthesize silicon-based phosphorescence enzyme-mimics (SiPEMs). Specifically, the atomic-level engineered Co-N4 structure in SiPEMs enables the environment-adaptive peroxidase, oxidase, and catalase-like activities. More intriguingly, the internal Si-O networks are able to stabilize the triplet state, exhibiting long-lived phosphorescence with lifetime of 124.5 ms, suitable for millisecond-range time-resolved imaging of tumor cells and tissue in mice (with high signal-to-background ratio values of ∼60.2 for in vitro and ∼611 for in vivo). Meanwhile, the SiPEMs act as an oxidative stress amplifier, allowing the production of ·OH via cascade reactions triggered by the tumor microenvironment (∼136-fold enhancement in peroxidase catalytic efficiency); while the enzyme-mimics can scavenge the accumulation of reactive oxygen species to alleviate the oxidative damage in normal cells, they are therefore suitable for environment-adaptive catalytic treatment of cancer in specific manners. We innovate a systematic strategy to develop high-performance enzymemics, constructing a promising breakthrough for replacing traditional enzymes in cancer treatment applications.

Single-atom nanozymes: classification, regulation strategy, and safety concerns

Nanozymes, nanomaterials possessing enzymatic activity, have been studied extensively by researchers. However, their complex composition, low density of active sites, and inadequate substrate selectivity have hindered the maturation and widespread acceptance of nanozymes. Single-atom nanozymes (SAzymes) with atomically dispersed active sites are leading the field of catalysis due to their exceptional performance. The maximum utilization rate of atoms, low cost, well-defined coordination structure, and active sites are the most prominent advantages of SAzymes that researchers favor. This review systematically categorizes SAzymes based on their support type and describes their specific applications. Additionally, we discuss regulation strategies for SAzyme activity and provide a comprehensive summary of biosafety challenges associated with these enzymes.

Polarity Conversion of the Ag2S/AgInS2 Heterojunction by Radical-Induced Positive Feedback Polydopamine Adhesion for Signal-Switchable Photoelectrochemical Biosensing

Efficient tuning of the polarity of photoactive nanomaterials is of great importance in improving the performance of photoelectrochemical (PEC) sensing platforms. Herein, polarity of the Ag2S/AgInS2 heterojunction is converted by radical-induced positive feedback polydopamine (PDA) adhesion, which is further employed to develop a signal-switchable PEC biosensor. In the nanocomposites, Ag2S and AgInS2 achieve electron-hole separation, exhibiting a strong anodic PEC response. Under the irradiation of light, the Ag2S/AgInS2 heterojunction is able to produce superoxide radical and hydroxyl radical intermediate species, leading to the polymerization of dopamine (DA) and the subsequent adhesion of PDA onto the Ag2S/AgInS2 heterojunction (Ag2S/AgInS2@PDA). By constructing a new electron-transfer pathway with PDA, the polarity of the Ag2S/AgInS2 heterojunction is converted, and the PEC response changes from anodic to cathodic photocurrents. In addition, since the photoreduction activity of PDA is stronger than that of the Ag2S/AgInS2 heterojunction, more superoxide radical can be produced by Ag2S/AgInS2@PDA once PDA is generated, thereby promoting the generation of PDA. Consequently, a positive feedback mechanism is established to enhance the polarity conversion of the Ag2S/AgInS2 heterojunction and amplify the responding to DA. As a result, the bioanalytical method is capable of sensitively quantifying DA in 10 orders of magnitude with an ultralow limit of detection. Moreover, the applicability of this biosensor in real samples is identified by measuring DA in fetal bovine serum and compared with a commercial ELISA method. Overall, this work offers an alternative perspective for adjusting photogenerated carriers of nanomaterials and designing high-performance PEC biosensors.

Post-Assay Chemical Enhancement for Highly Sensitive Lateral Flow Immunoassays: A Critical Review

Lateral flow immunoassay (LFIA) has found a broad application for testing in point-of-care (POC) settings. LFIA is performed using test strips-fully integrated multimembrane assemblies containing all reagents for assay performance. Migration of liquid sample along the test strip initiates the formation of labeled immunocomplexes, which are detected visually or instrumentally. The tradeoff of LFIA's rapidity and user-friendliness is its relatively low sensitivity (high limit of detection), which restricts its applicability for detecting low-abundant targets. An increase in LFIA's sensitivity has attracted many efforts and is often considered one of the primary directions in developing immunochemical POC assays. Post-assay enhancements based on chemical reactions facilitate high sensitivity. In this critical review, we explain the performance of post-assay chemical enhancements, discuss their advantages, limitations, compared limit of detection (LOD) improvements, and required time for the enhancement procedures. We raise concerns about the performance of enhanced LFIA and discuss the bottlenecks in the existing experiments. Finally, we suggest the experimental workflow for step-by-step development and validation of enhanced LFIA. This review summarizes the state-of-art of LFIA with chemical enhancement, offers ways to overcome existing limitations, and discusses future outlooks for highly sensitive testing in POC conditions.

Cascade Reaction Regulated Electrochemiluminescence via Dual-Atomic-Site Catalysts

Single-atom catalysts (SACs), a novel kind of electrocatalysts with full metal utilization, have been developed as unique signal amplifiers in several sensing platforms. Herein, based on theoretical prediction of the oxygen reduction reaction (ORR) mechanism on different atom sites, we constructed dual-atomic-site catalysts (DACs), Fe/Mn-N-C, to catalyze luminol-dissolved oxygen electrochemiluminescence (ECL). Computational simulation indicated that the weak adsorption of OH* on a single Fe site was overcome by introducing Mn as the secondary metallic active site, resulting in a synergic dual-site cascade mechanism. The superior catalytic activity of Fe/Mn-N-C DACs for the ORR was proven by the highly efficient cathodic luminol ECL, surpassing the performance of single-site catalysts (SACs), Fe-N-C and Mn-N-C. Furthermore, the ECL system, enhanced by a cascade reaction, exhibited remarkable sensitivity to ascorbic acid, with a detection limit of 0.02 nM. This research opens up opportunities for enhancing both the ECL efficiency and sensing performance by employing a rational atomic-scale design for DACs.

Flexible and Stretchable Electrochemical Sensors for Biological Monitoring

The rise of flexible and stretchable electronics has revolutionized biosensor techniques for probing biological systems. Particularly, flexible and stretchable electrochemical sensors (FSECSs) enable the in situ quantification of numerous biochemical molecules in different biological entities owing to their exceptional sensitivity, fast response, and easy miniaturization. Over the past decade, the fabrication and application of FSECSs have significantly progressed. This review highlights key developments in electrode fabrication and FSECSs functionalization. It delves into the electrochemical sensing of various biomarkers, including metabolites, electrolytes, signaling molecules, and neurotransmitters from biological systems, encompassing the outer epidermis, tissues/organs in vitro and in vivo, and living cells. Finally, considering electrode preparation and biological applications, current challenges and future opportunities for FSECSs are discussed.

Biomolecular sensors for advanced physiological monitoring

Body-based biomolecular sensing systems, including wearable, implantable and consumable sensors allow comprehensive health-related monitoring. Glucose sensors have long dominated wearable bioanalysis applications owing to their robust continuous detection of glucose, which has not yet been achieved for other biomarkers. However, access to diverse biological fluids and the development of reagentless sensing approaches may enable the design of body-based sensing systems for various analytes. Importantly, enhancing the selectivity and sensitivity of biomolecular sensors is essential for biomarker detection in complex physiological conditions. In this Review, we discuss approaches for the signal amplification of biomolecular sensors, including techniques to overcome Debye and mass transport limitations, and selectivity improvement, such as the integration of artificial affinity recognition elements. We highlight reagentless sensing approaches that can enable sequential real-time measurements, for example, the implementation of thin-film transistors in wearable devices. In addition to sensor construction, careful consideration of physical, psychological and security concerns related to body-based sensor integration is required to ensure that the transition from the laboratory to the human body is as seamless as possible.

Single-atom boosted electrochemiluminescence via phosphorus doping of Fe–N/P–C catalysts

Single-atom catalyst (SAC), one of the most attractive catalysts in the field of energy conversion and storage, was proven as efficient accelerator for luminol-dissolved oxygen electrochemiluminescence (ECL) via the catalysis of oxygen reduction reaction (ORR). In this work, we synthesized heteroatom doping SACs of Fe-N/P-C for the catalysis of cathodic luminol ECL. The doping of P could lower the reaction energy barrier of the OH* reduction, and promote catalytic efficiency toward ORR. The formation of reactive oxygen species (ROS) during ORR triggered cathodic luminol ECL. Greatly enhanced ECL emission catalyzed by SACs proved that Fe-N/P-C exhibited higher catalytic activity to ORR compared with Fe-N-C. Since the system was highly dependent on oxygen, an ultra-sensitive detection of a typical antioxidant, ascorbic acid, was achieved with detection limit of 0.03 nM. This study provides possibility to greatly enhance the performance of ECL platform through rational tailoring of SACs via heteroatom doping.

Dual-mode biosensor platform based on synergistic effects of dual-functional hybrid nanomaterials

Detection of biomarkers is very vital in the prevention, diagnosis and treatment of diseases. However, due to the poor accuracy and sensitivity of the constructed biosensors, we are now facing great challenges. In addressing these problems, nanohybrid-based dual mode biosensors including optical-optical, optical-electrochemical and electrochemical-electrochemical have been developed to detect various biomarkers. Integrating the merits of nanomaterials with abundant active sites, synergy and excellent physicochemical properties, many bi-functional nanohybrids have been reasonable designed and controllable preparation, which applied to the construction dual mode biosensors. Despite the significant progress, further efforts are still needed to develop dual mode biosensors and ensure their practical application by using portable digital devices. Therefore, the present review summarizes an in-depth evaluation of the bi-functional nanohybrids assisted dual mode biosensing platform of biomarkers. We are hoping this review could inspire further concepts in developing novel dual mode biosensors for possible detection application.

Recent advances in optical aptasensors for biomarkers in early diagnosis and prognosis monitoring of hepatocellular carcinoma

Hepatocellular carcinoma (HCC) accounts for approximately 90% of all primary liver cancers and is one of the main malignant tumor types globally. It is essential to develop rapid, ultrasensitive, and accurate strategies for the diagnosis and surveillance of HCC. In recent years, aptasensors have attracted particular attention owing to their high sensitivity, excellent selectivity, and low production costs. Optical analysis, as a potential analytical tool, offers the advantages of a wide range of targets, rapid response, and simple instrumentation. In this review, recent progress in several types of optical aptasensors for biomarkers in early diagnosis and prognosis monitoring of HCC is summarized. Furthermore, we evaluate the strengths and limitations of these sensors and discuss the challenges and future perspectives for their use in HCC diagnosis and surveillance.

Single-Site SnOCu Pairs with Interfacial Electron Transfer Effect for Enhanced Electrochemical Catalysis and Sensing

As advanced electrochemical catalysts, single-atom catalysts have made great progress in the field of catalysis and sensing due to their high atomic utilization efficiency and excellent catalytic performance. Herein, stannum-doped copper oxide (CuOSn₁ ) nanosheets with single-site SnOCu pairs as active sites are synthesized as electrocatalysts for biological molecule detection. Compared with CuO-based electrochemical sensors, the CuOSn₁ -based electrochemical sensors have improved detection sensitivity with a rapid electrochemical response. Theoretical calculation reveals that the single-site SnOCu pairs induced interfacial electronic transfer effect can strengthen hydroxy adsorption and thus reduce the energy barrier of the biological molecule oxidation process. As a concept application, electrochemical detection of dopamine and uric acid molecules is achieved, exhibiting satisfactory sensitivity and selectivity. This work demonstrates the advantages of single-site SnOCu pairs in electrochemical catalysis and sensing, which provides theoretical guidance for understanding the structure-activity relationship for sensitive electrochemical sensing.

Advances in electrochemiluminescence luminophores based on small organic molecules for biosensing

Electrochemiluminescence (ECL) has several advantages, such as a near-zero background signal, high sensitivity, wide dynamic range, simplicity, and is widely used for sensing, imaging, and single cell analysis. ECL luminophores are the key factors in the performance of various applications. Among various luminophores, small organic luminophores exhibit many intriguing features including good biocompatibility, facile modification, well-defined molecular structure, and sustainable raw materials, making small organic luminophores attractive for the use in the ECL field. Although many great achievements have been made in the synthesis of new small organic luminophores, solving various challenges, and expanding new applications, there are almost no comprehensive reviews on small organic ECL luminophores. In this review, we briefly introduce the advantages and emission mechanisms of small organic ECL luminophores, summarize the main types, molecular characteristics, and ECL properties of most existing small organic ECL luminophores, and present the important applications and design principles in sensors, imaging, single cell analysis, sterilization, and other fields. Finally, the challenges and outlook of organic ECL luminophores to be popularized in biosensing applications are also discussed.

Tuning Local Coordination Environments of Manganese Single-Atom Nanozymes with Multi-Enzyme Properties for Selective Colorimetric Biosensing

Single-atom nanozymes (SAzymes) are promising in next-generation nanozymes, nevertheless, how to rationally modulate the microenvironment of SAzymes with controllable multi-enzyme properties is still challenging. Herein, we systematically investigate the relationship between atomic configuration and multi-enzymatic performances. The constructed Mn_SA -N₃ -coordinated SAzymes (Mn_SA -N₃ -C) exhibits much more remarkable oxidase-, peroxidase-, and glutathione oxidase-like activities than that of Mn_SA -N₄ -C. Based on experimental and theoretical results, these multi-enzyme-like behaviors are highly dependent on the coordination number of single atomic Mn sites by local charge polarization. As a consequence, a series of colorimetric biosensing platforms based on Mn_SA -N₃ -C SAzymes is successfully built for specific recognition of biological molecules. These findings provide atomic-level insight into the microenvironment of nanozymes, promoting rational design of other demanding biocatalysts.

Recent Progress in Cyclic Aryliodonium Chemistry: Syntheses and Applications

Hypervalent aryliodoumiums are intensively investigated as arylating agents. They are excellent surrogates to aryl halides, and moreover they exhibit better reactivity, which allows the corresponding arylation reactions to be performed under mild conditions. In the past decades, acyclic aryliodoniums are widely explored as arylation agents. However, the unmet need for acyclic aryliodoniums is the improvement of their notoriously low reaction economy because the coproduced aryl iodides during the arylation are often wasted. Cyclic aryliodoniums have their intrinsic advantage in terms of reaction economy, and they have started to receive considerable attention due to their valuable synthetic applications to initiate cascade reactions, which can enable the construction of complex structures, including polycycles with potential pharmaceutical and functional properties. Here, we are summarizing the recent advances made in the research field of cyclic aryliodoniums, including the nascent design of aryliodonium species and their synthetic applications. First, the general preparation of typical diphenyl iodoniums is described, followed by the construction of heterocyclic iodoniums and monoaryl iodoniums. Then, the initiated arylations coupled with subsequent domino reactions are summarized to construct polycycles. Meanwhile, the advances in cyclic aryliodoniums for building biaryls including axial atropisomers are discussed in a systematic manner. Finally, a very recent advance of cyclic aryliodoniums employed as halogen-bonding organocatalysts is described.

High-Indexed Intermetallic Pt3Sn Nanozymes with High Activity and Specificity for Sensitive Immunoassay

Great efforts have been made to expand the application fields of nanozymes, which puts forward requirements for nanozymes with both superior catalytic activity and specificity. Herein, we reported the high-indexed intermetallic Pt₃Sn (H-Pt₃Sn) with high peroxidase-like activity and specificity. The resultant H-Pt₃Sn exhibits a specific activity of 345.3 U/mg, which is 1.82 times higher than Pt. Moreover, H-Pt₃Sn possesses negligible oxidase-like and catalase-like activities, achieving superior catalytic specificity toward H₂O₂ activation. Experimental and theoretical calculations reveal both the splitting energy for adsorbed H₂O₂ and the energy barrier for the rate-determining step of H-Pt₃Sn are significantly decreased compared with Pt₃Sn and Pt. Finally, a nanozyme-linked immunosorbent assay is successfully developed, achieving the sensitive and accurate colorimetric detection for carcinoembryonic antigen with a low detection limit of 0.49 pg/mL and showing practical feasibility in serum sample detection.

Solid Migration to Assemble a Flower-like Nanozyme with Highly Dense Single Copper Sites for Specific Phenol Oxidation

Nanozymes with high catalytic stability and sustainability have emerged as powerful competitors to natural enzymes for diverse biocatalytic applications. However, constructing a nanozyme with high specificity is one of their biggest challenges. Herein, we develop a facile solid migration strategy to access a flower-like single copper site nanozyme (Cu SSN) via direct transformation of copper foam activated by 2-methylimidazole. With highly clustered CuN₃ sites whose local structure is similar to that of natural polyphenol oxidase, the Cu SSN exhibits excellent activity and specificity to oxidize phenols without peroxidase-like activity. Furthermore, the Cu SSN shows high sensitivity in the colorimetric detection of epinephrine with a low detection limit of 0.10 μg mL^-1, exceeding that of most previously reported enzyme-mimicking catalysts. This work not only provides a simple method for the large-scale preparation of high-performance nanozymes but also offers an inspiration for the design of highly specific nanozymes by mimicking the synergy among sites in natural enzymes.

Single-atom nanozymes: From bench to bedside

Single-atom nanozymes (SANs) are the new emerging catalytic nanomaterials with enzyme-mimetic activities, which have many extraordinary merits, such as low-cost preparation, maximum atom utilization, ideal catalytic activity, and optimized selectivity. With these advantages, SANs have received extensive research attention in the fields of chemistry, energy conversion, and environmental purification. Recently, a growing number of studies have shown the great promise of SANs in biological applications. In this article, we present the most recent developments of SANs in anti-infective treatment, cancer diagnosis and therapy, biosensing, and antioxidative therapy. This text is expected to better guide the readers to understand the current state and future clinical possibilities of SANs in medical applications.

Atomic Dispersion of Zn2+ on N-Doped Carbon Materials: From Non-Activity to High Activity for Catalyzing Luminol-H2O2 Chemiluminescence

Fe and Co single-atom catalysts (SACs) have been widely explored in many fields, while Zn SACs are still in their infancy stage. Herein, we unexpectedly found that atomically dispersed Zn²⁺ on N-doped carbon material (Zn-N-C) exhibited high catalytic activity on luminol-H₂O₂ chemiluminescence (CL) reaction. The Zn-N-C SACs were readily prepared through simple pyrolyzation of the cheap precursors (dopamine and ZnCl₂). The mechanism of Zn SAC-catalyzed CL reaction of luminol-H₂O₂ was investigated in detail. The activity of Zn SACs originated from the Zn-N sites in the Zn-N-C structure. The monoatomic dispersion makes Zn²⁺ catalytic performance change from no activity to high activity in luminol-H₂O₂ CL reaction. This study demonstrated the particularity of the monatomic metal catalyst over the conventional metal ion. This work provides the unprecedented perspective for design of new metal SACs in CL reaction.

Ultrasensitive NO Sensor Based on a Nickel Single-Atom Electrocatalyst for Preliminary Screening of COVID-19

A new coronavirus, SARS-CoV-2, has caused the coronavirus disease-2019 (COVID-19) epidemic. A rapid and economical method for preliminary screening of COVID-19 may help to control the COVID-19 pandemic. Here, we report a nickel single-atom electrocatalyst that can be printed on a paper-printing sensor for preliminary screening of COVID-19 suspects by efficient detection of fractional exhaled nitric oxide (FeNO). The FeNO value is confirmed to be related to COVID-19 in our exploratory clinical study, and a machine learning model that can accurately classify healthy subjects and COVID-19 patients is established based on FeNO and other features. The nickel single-atom electrocatalyst consists of a single nickel atom with N₂O₂ coordination embedded in porous acetylene black (named Ni-N₂O₂/AB). A paper-printed sensor was fabricated with the material and showed ultrasensitive response to NO in the range of 0.3-180 ppb. This ultrasensitive sensor could be applied to preliminary screening of COVID-19 in everyday life.

A highly sensitive fluorescent nanoprobe for the amplified detection of formaldehyde

Non-conjugated polymer nanoparticles (PNPs) have been widely reported for analytical applications; however, the development of an effective fluorescence signal-amplification scheme based on PNPs remains challenging. In this study, polyethyleneimine-based polymer nanoparticles (PEI-PNPs) were synthesized for interrogating the fluorescence signal-amplification analytical application of the PNPs. The PEI-PNPs with an aggregated PEI polymer structure were able to confine a large density of sub-fluorophores on an individual nanoparticle, enabling the realization of a signal-amplification effect. Herein, formaldehyde (FA) was utilized for enhancing the fluorescence intensity of the PEI-PNPs as a model to confirm our proof-of-concept strategy. Our results showed that a more than 9-fold signaling-enhancing ability for the sensing of FA was observed using the PEI-PNPs prepared with a higher PEI concentration. The possible mechanism for the FA amplified sensing was studied. In particular, the FA-recognition units were sub-fluorophores of PEI-PNPs, which were simultaneously formed with the preparation of the PEI-PNPs avoiding the leakage effect of dyes. We believe that the water-soluble and biocompatible PEI-PNPs are promising candidates for the detection of endogenous FA in living systems.

A chemical timer approach to delayed chemiluminescence

Although the onset time of chemical reactions can be manipulated by mechanical, electrical, and optical methods, its chemical control remains highly challenging. Herein, we report a chemical timer approach for manipulating the emission onset time of chemiluminescence (CL) reactions. A mixture of Mn²⁺, NaHCO₃, and a luminol analog with H₂O₂ produced reactive oxygen species (ROS) radicals and other superoxo species (superoxide containing complex) with high efficiency, accompanied by strong and immediate CL emission. Surprisingly, the addition of thiourea postponed CL emission in a concentration-dependent manner. The delay was attributed to a slow-generation-scavenging mechanism, which was found to be generally applicable not only to various types of CL reagents and ROS radical scavengers but also to popular chromogenic reactions. The precise regulation of CL kinetics was further utilized in dynamic chemical coding with improved coding density and security. This approach provides a powerful platform for engineering chemical reaction kinetics using chemical timers, which is of application potential in bioassays, biosensors, CL microscopic imaging, microchips, array chips, and informatics.