MOF Derived Cobalt Ferrite Cubic Rod-Like Materials for Highly Efficient Electrochemical Simultaneous Detection of Multiple Heavy Metal Ions

A series of CoFe2O4 materials derived from metal-organic framework were successfully constructed by the solvent-thermal method. The morphology of a typical sample CoFe2O4-1 was mostly in the form of a cubic rod-like structure with a size distribution of 3.2±0.2 μm, while a small amount of the structure presented hexagonal shape with uniform size dispersion. The XPS characterization results confirmed that the CoFe2O4-1 material contained Co3+ (Co2+/Co3+=0.98), and the redox reaction between Co2+ and Fe3+ produced more Fe2+ (Fe2+/Fe3+=1.63), leading to the production of more OV on the surface of the CoFe2O4-1 material (OV%=0.34), thereby facilitating the efficient adsorption of the efficient adsorption of heavy metal ions (HMIs). CoFe2O4-1/GCE as a typical electrode presented excellent performance for the detection of multiple HMIs. The results should be attributed to the good electrical conductivity and large electrochemically active surface area of CoFe2O4-1/GCE, accelerating the transport of ions and charges in the system. Interestingly, there are interaction mechanisms between the HMIs when performing simultaneous detection, suggesting the detection of target ions can be facilitated by adding additional ions. This study provides new research insights for the development of highly sensitive electrochemical sensors for real-time environmental monitoring.

M-Doped (M = Zn, Mn, Ni) Co-MOF-Derived Transition Metal Oxide Nanosheets on Carbon Fibers for Energy Storage Applications

Carbon fiber, with its strong mechanical properties and electrical conductivity, is ideal as a fiber electrode in wearable or structural energy storage devices. However, its energy storage capacity is limited, and coatings like transition metal oxides (TMOs) enhance its electrochemical performance. Metal-organic frameworks (MOFs) are commonly used to grow TMOs on carbon fibers, increasing the surface area for better energy storage. Despite this, TMOs have limited electrical conductivity, so ion exchange is often used to dope them with additional cations, improving both conductivity and energy storage capacity. This study compares different ion-exchange cations in ZIF-L-derived TMO coatings on carbon fiber. Testing both supercapacitor and Li-ion battery applications, Ni-doped samples showed superior results, attributed to their higher exchange ratio with cobalt. As a supercapacitor electrode, the Ni-doped material achieved 13.3 F/g at 50 mA/g-66% higher than undoped samples. For Li-ion battery anodes, it reached a specific capacity of 410.5 mAh/g at 25 mA/g, outperforming undoped samples by 21.4%.

Metal-organic framework-derived nanoflower and nanoflake metal oxides as electrocatalysts for methanol oxidation

The energy crisis is the most urgent issue facing contemporary society and needs to be given top priority. As energy consumption rises, environmental pollution is becoming a serious issue. Direct methanol fuel cells (DMFCs) have emerged as the most promising energy source for a variety of applications such as electric vehicles and portable devices. Unfortunately, the kinetics of methanol oxidation is slow and needs an electrocatalyst to improve the reaction kinetics and the overall fuel cell efficiency. Herein, a straightforward hydrothermal procedure was utilized to prepare copper, nickel, and cobalt-based MOF composites by altering the elemental molar ratios. Cu-MOF (MOFP1), Cu/Ni-MOF (MOFP2), and Cu/Ni/Co-MOF (MOFP3) were prepared after carbonization and characterized using several key techniques such as FTIR, XRD, SEM, and EDX. The SEM analysis reveals that the morphology of MOFP1 is spherical aggregated particles, while that of MOFP2 or MOFP3 is in the form of nanoflakes and nanoflowers. Moreover, upon application of these composites as electrocatalysts for methanol electro-oxidation in an alkaline medium of 1 M NaOH using cyclic voltammetry (CV) and chronoamperometry (CA) tests, the electrochemical performance of MOFP2 in 1 M methanol exhibits the best performance for methanol oxidation with a current density reaching 38.77 mA cm-2 at a scan rate of 60 mV s-1. This can be attributed to the unique porous open flower structure and the synergistic effect between copper, nickel, and 2-aminoterephthalic acid which develop its catalytic activity.

Facile synthesis of a carbon supported lithium iron phosphate nanocomposite cathode material from metal-organic framework for lithium-ion batteries

Lithium iron phosphate (LiFePO4, LFP) has become one of the most widely used cathode materials for lithium-ion batteries. The inferior lithium-ion diffusion rate of LFP crystals always incurs poor rate capability and unsatisfactory low-temperature performances. To meet with the requirements from the ever-growing market, it is of great significance to synthesize carbon supported LFP nanocomposite (LFP/C) cathode materials using cost effective and environmentally friendly methods. In this work, an LFP/C cathode material is straightforwardly prepared from a metal-organic framework (MOF) precursor ferric gallate (Fe-GA) using its self-template effect. The Fe-GA precursor is firstly fabricated from the redox coprecipitation reaction between Fe foils and gallic acid (GA) molecules in mild aqueous phase. Then the Fe-GA is directly converted to the LFP/C sample after a following solid-state reaction. In half-cells, the LFP/C composite exhibits a reversible capacity of 109.7 mAh·g-1 after 500 cycles under the current rate of 100 mA·g-1 at 25 °C as well as good rate capabilities. In the LFP/C//graphite full-cells, the LFP/C composite can deliver a reversible capacity of 71.4 mAh·g-1 after 50 cycles in the same condition as the half-cells. The electrochemical performances of the LFP/C cathode in half-cells at lower temperature of -10 °C are also examined. Particularly, the evolution of samples has been explored and the lithium-ion storage mechanism of the LFP/C cathode has been unveiled. The sample synthesis protocol is straightforward, eco-friendly and atomic efficient, which can be considered to have good potential for scaling-up.

Metal-Organic Framework-Derived High-Entropy Oxides as Coreaction Accelerators for an Efficient Luminol/Dissolved Oxygen Electrochemiluminescence System for Ultrasensitive Mercury Detection

The development of luminol-dissolved O2 (luminol-DO) electrochemiluminescence (ECL) systems is crucial for real-world applications. Despite its stability and low biotoxicity, luminol-DO ECL systems struggle with low ECL performance due to their low reactivity. Investigating new materials like coreactant accelerators increases reactive oxygen species (ROS) formation and enhances luminol-DO ECL intensity. Motivated by the ROS-mediated ECL process, for the first time, we designed oxygen vacancy (OV)-rich high-entropy oxides (HEO) with five metal components [(FeCoNiCuZn)O] derived from metal-organic frameworks (MOFs) as coreaction accelerators to establish efficient luminol-DO ECL systems. High entropy (HE) MOFs were annealed at four different temperatures (600, 700, 800, and 900 °C). Indeed, the HE MOFs annealed at 800 °C (HEO-800) showed a 120-fold stronger ECL intensity compared to the bare glassy carbon electrode in the luminol-DO ECL system. The enhanced ECL performance can be attributed to the porous structure, unique morphology, heterostructures, high-density active sites, rich OV, unsaturated metals, and synergistic impact, which act as catalysts to accelerate the conversion of DO to ROS. The developed HEO-800-based luminol-DO ECL system can be effectively used for the high-sensitivity detection of mercury ions (Hg2+). The system detected Hg2+ over a wide concentration range from 0.1 nM to 100 μM, with a detection limit of 0.02 nM. The sensing mechanism relied on high-affinity metallophilic Hg2+-HEO-800 interactions, effectively quenching the ECL intensity of the luminol-DO/HEO-800 ECL system. The ECL sensing platform, developed without H2O2, offers a novel method for detecting substances, demonstrating significant potential for clinical diagnosis and biomarker analysis.

Development of MOF-derived Co3O4 microspheres composed of fiber stacks for simultaneous electrochemical detection of Pb2+ and Cu2

As an ideal transition metal oxide, Co3O4 is a P-type semiconductor with excellent electrical conductivity, non-toxicity and low cost. This work reports the successful construction of Co3O4 materials derived from metal-organic frameworks (MOFs) using a surfactant micelle template-solvothermal method. The modified electrodes are investigated for their ability to electrochemically detect Pb2+ and Cu2+ in aqueous environments. By adjusting the mass ratios of alkaline modifiers, the morphological microstructures of Co3O4-X exhibit a transition from distinctive microspheres composed of fiber stacks to rods. The results indicate that Co3O4-1(NH4F/CO(NH2)2 = 1:0) has a distinctive microsphere structure composed of stacked fibers, unlike the other two materials. Co3O4-1/GCE is used as the active material of the modified electrode, it shows the largest peak response currents to Pb2+ and Cu2+, and efficiently detects Pb2+ and Cu2+ in the aqueous environment individually and simultaneously. The linear response range of Co3O4-1/GCE for the simultaneous detection of Pb2+ and Cu2+ is 0.5-1.5 μM, with the limits of detection (LOD, S/N = 3) are 9.77 nM and 14.97 nM, respectively. The material exhibits a favorable electrochemical response, via a distinctive Co3O4-1 microsphere structure composed of stacked fibers. This structure enhances the number of active adsorption sites on the material, thereby facilitating the adsorption of heavy metal ions (HMIs). The presence of oxygen vacancies (OV) can also facilitate the adsorption of ions. The Co3O4-1/GCE electrode also exhibits excellent anti-interference ability, stability, and repeatability. This is of great practical significance for detecting Pb2+ and Cu2+ in real water samples and provides a new approach for developing high-performance metal oxide electrochemical sensors derived from MOFs.

Nanostructured Transition Metal Oxides on Carbon Fibers for Supercapacitor and Li-Ion Battery Electrodes: An Overview

Nowadays, owing to the new technological and industrial requirements for equipment, such as flexibility or multifunctionally, the development of all-solid-state supercapacitors and Li-ion batteries has become a goal for researchers. For these purposes, the composite material approach has been widely proposed due to the promising features of woven carbon fiber as a substrate material for this type of material. Carbon fiber displays excellent mechanical properties, flexibility, and high electrical conductivity, allowing it to act as a substrate and a collector at the same time. However, carbon fiber's energy-storage capability is limited. Several coatings have been proposed for this, with nanostructured transition metal oxides being one of the most popular due to their high theoretical capacity and surface area. In this overview, the main techniques used to achieve these coatings-such as solvothermal synthesis, MOF-derived obtention, and electrochemical deposition-are summarized, as well as the main strategies for alleviating the low electrical conductivity of transition metal oxides, which is the main drawback of these materials.

Enhanced brackish water desalination in capacitive deionization with composite Zn-BTC MOF-incorporated electrodes

In this study, composite electrodes with metal-organic framework (MOF) for brackish water desalination via capacitive deionization (CDI) were developed. The electrodes contained activated carbon (AC), polyvinylidene fluoride (PVDF), and zinc-benzene tricarboxylic acid (Zn-BTC) MOF in varying proportions, improving their electrochemical performance. Among them, the E4 electrode with 6% Zn-BTC MOF exhibited the best performance in terms of CV and EIS analyses, with a specific capacity of 88 F g-1 and low ion charge transfer resistance of 4.9 Ω. The E4 electrode showed a 46.7% increase in specific capacitance compared to the E1 electrode, which did not include the MOF. Physicochemical analyses, including XRD, FTIR, FESEM, BET, EDS, elemental mapping, and contact angle measurements, verified the superior properties of the E4 electrode compared to E1, showcasing successful MOF synthesis, desirable pore size, elemental and particle-size distribution of materials, and the superior hydrophilicity enhancement. By evaluating salt removal capacity (SRC) in various setups using an initially 100.0 mg L-1 NaCl feed solution, the asymmetric arrangement of E1 and E4 electrodes outperformed symmetric arrangements, achieving a 21.1% increase in SRC to 6.3 mg g-1. This study demonstrates the potential of MOF-incorporated electrodes for efficient CDI desalination processes.

Special Issue "Design, Synthesis and Applications of Macroporous, Mesoporous, and Microporous Materials"

The intention of this Special Issue was to highlight the importance of the design, synthesis, and applications of macro-, meso-, and microporous materials [...].

A MOF-derived flower-shaped CeCo-oxide as a multifunctional material for high-performance lithium-ion batteries and supercapacitors

Precursor method is a well-known technology for preparing certain functional materials. In this work, a novel 3d-4f bimetallic organic framework, denoted as 45MCeCo (45 M representing 4,5-imidazole dicarboxylic acid), was successfully synthesized via a hydrothermal technique. The compound thus obtained has the molecular formula of C10H11CeCoN4O12. By meticulously controlling the amounts of the experimental materials, it was feasible to prepare flower-like crystals possessing identical single crystal structures and significantly larger specific surface areas. As a precursor for electrode materials, this structure underwent calcination at different temperatures to prepare Co3O4/CeO2 composites with in situ composite heterostructures. Post-electrochemical tests revealed that CeO2 remains unreactive across all potentials, thereby contributing to the stabilization of the electrode material structure. In contrast, Co3O4 participated in redox reactions to provide a specific capacity to the sample. In addition, when comparing the performance of the electrode material under different calcination conditions, it became evident that the material exhibited optimal electrochemical performance when subjected to a temperature of 700 °C for 2 h.

Thermally activated structural phase transitions and processes in metal-organic frameworks

The structural knowledge of metal-organic frameworks is crucial to the understanding and development of new efficient materials for industrial implementation. This review classifies and discusses recent advanced literature reports on phase transitions that occur during thermal treatments on metal-organic frameworks and their characterisation. Thermally activated phase transitions and procceses are classified according to the temperaturatures at which they occur: high temperature (reversible and non-reversible) and low temperature. In addition, theoretical calculations and modelling approaches employed to better understand these structural phase transitions are also reviewed.

Unlocking the future of brain research: MOFs, TMOs, and MOFs/TMOs for electrochemical NTMs detection and analysis

The central nervous system relies heavily on neurotransmitters (NTMs), and NTM imbalances have been linked to a wide range of neurological conditions. Thus, the development of reliable detection techniques is essential for advancing brain studies. This review offers a comprehensive analysis of metal-organic frameworks (MOFs), transition metal oxides (TMOs), and MOFs-derived TMOs (MOFs/TMOs) as materials for electrochemical (EC) sensors targeting the detection of key NTMs, specifically dopamine (DA), epinephrine (EP), and serotonin (SR). The unique properties and diverse families of MOFs and TMOs, along with their nanostructured hybrids, are discussed in the context of EC sensing. The review also addresses the challenges in detecting NTMs and proposes a systematic approach to tackle these obstacles. Despite the vast amount of research on MOFs and TMOs-based EC sensors for DA detection, the review highlights the gaps in the literature for MOFs/TMOs-based EC sensors specifically for EP and SR detection, as well as the limited research on microneedles (MNs)-based EC sensors modified with MOFs, TMOs, and MOFs/TMOs for NTMs detection. This review serves as a foundation to encourage researchers to further explore the potential applications of MOFs, TMOs, and MOFs/TMOs-based EC sensors in the context of neurological disorders and other health conditions related to NTMs imbalances.

Computing Mixture Adsorption in Porous Materials through Flat Histogram Monte Carlo Methods

Mixture adsorption properties of porous materials are critical to determine their potential as adsorbents in separation applications. Toward the discovery of optimal adsorbents, in silico screening studies typically employ the grand canonical Monte Carlo (GCMC) technique to compute adsorption properties of gas mixtures in materials of interest at a given condition (i.e., composition, total pressure, and temperature) or to compute their adsorption properties for each component, followed by utilizing methods to predict mixture adsorption isotherms. However, the former approach results in the need for repeated calculations when different conditions such as compositions are considered. For the latter, the predictions may involve uncertainties, sometimes originating from the fitting quality to the pure component isotherms, and repeated simulations may also be needed for different temperatures. To this end, this study demonstrates the potential of flat histogram Monte Carlo methods in addressing the abovementioned shortfalls. Specifically, the so-called NVT + W method, first reported by Smit and co-workers, is extended herein to determine the macrostate probability distribution (MPD) of binary mixtures in porous materials. The obtained MPD can be reweighted to any conditions, yielding accurate adsorption isotherms of any desired compositions and temperatures. This approach, denoted as 2D NVT + W, is also compared with the widely adopted ideal adsorbed solution theory (IAST) method, and the former is found to offer more reliable predictions. Overall, the 2D NVT + W approach represents an efficient and effective alternative to compute mixture adsorption isotherms for porous materials, and the obtained MPD can be conveniently reused by peer researchers. A user-friendly Python code is also provided along with this article to employ this method.

Synthesis and characterization of lead-based metal-organic framework nano-needles for effective water splitting application

Metal organic frameworks (MOFs) are a class of porous materials characterized by robust linkages between organic ligands and metal ions. Metal-organic frameworks (MOFs) exhibit significant characteristics such as high porosity, extensive surface area, and exceptional chemical stability, provided the constituent components are meticulously selected. A metal-organic framework (MOF) containing lead and ligands derived from 4-aminobenzoic acid and 2-carboxybenzaldehyde has been synthesized using the sonochemical methodology. The crystals produced were subjected to various analytical techniques such as Fourier-transform infrared spectroscopy (FT-IR), Powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), Brunauer-Emmett-Teller (BET), and thermal analysis. The BET analysis yielded results indicating a surface area was found to be 1304.27 m2 g-1. The total pore volume was estimated as 2.13 cm3 g-1 with an average pore size of 4.61 nm., rendering them highly advantageous for a diverse range of practical applications. The activity of the modified Pb-MOF electrode was employed toward water-splitting applications. The electrode reached the current density of 50 mA cm-2 at an overpotential of - 0.6 V (vs. RHE) for hydrogen evolution, and 50 mA cm-2 at an overpotential of 1.7 V (vs. RHE) for oxygen evolution.

Electron and Ion Transport in Lithium and Lithium-Ion Battery Negative and Positive Composite Electrodes

Electrochemical energy storage systems, specifically lithium and lithium-ion batteries, are ubiquitous in contemporary society with the widespread deployment of portable electronic devices. Emerging storage applications such as integration of renewable energy generation and expanded adoption of electric vehicles present an array of functional demands. Critical to battery function are electron and ion transport as they determine the energy output of the battery under application conditions and what portion of the total energy contained in the battery can be utilized. This review considers electron and ion transport processes for active materials as well as positive and negative composite electrodes. Length and time scales over many orders of magnitude are relevant ranging from atomic arrangements of materials and short times for electron conduction to large format batteries and many years of operation. Characterization over this diversity of scales demands multiple methods to obtain a complete view of the transport processes involved. In addition, we offer a perspective on strategies for enabling rational design of electrodes, the role of continuum modeling, and the fundamental science needed for continued advancement of electrochemical energy storage systems with improved energy density, power, and lifetime.

Square-Facet Nanobar MOF-Derived Co3O4@Co/N-doped CNT Core-Shell-based Nanocomposites as Cathode Materials for High-Performance Supercapacitor Studies

The binary as well as ternary nanocomposites of the square-facet nanobar Co-MOF-derived Co₃O₄@Co/N-CNTs (N-CNTs: nitrogen-doped carbon nanotubes) with Ag NPs and rGO have been synthesized via an easy wet chemical route, and their supercapacitor behavior was then studied. At a controlled pH of the precursor solution, square-facet nanobars of Co-MOF were first synthesized by the solvothermal method and then pyrolyzed under a controlled nitrogen atmosphere to get a core-shell system of Co₃O₄@Co/N-CNTs. In the second step, different compositions of Co₃O₄@Co/N-CNT core-shell structures were formed by an ex-situ method with Ag NPs and rGO moieties. Among several bare, binary, and ternary compositions tested in 6 M aqueous KOH electrolyte, a ternary nanocomposite having a 7.0:1.5:1.5 stoichiometric ratio of Co₃O₄@Co/N-CNT, Ag NPs, and rGO, respectively, reported the highest specific capacitance (3393.8 F g^-1 at 5 mV s^-1). The optimized nanocomposite showed the energy density, power density, and Coulombic efficiency of 74.1 W h.kg^-1, 443.7 W.kg^-1, and 101.3%, respectively, with excellent electrochemical stability. After testing an asymmetrical supercapacitor with a Co₃O₄@Co/N-CNT/Ag NPs/rGO/nickel foam cathode and an activated carbon/nickel foam anode, it showed 4.9 W h.kg^-1 of energy density and 5000.0 W.kg^-1 of power density.

Graphene-Based Metal-Organic Framework Hybrids for Applications in Catalysis, Environmental, and Energy Technologies

Current energy and environmental challenges demand the development and design of multifunctional porous materials with tunable properties for catalysis, water purification, and energy conversion and storage. Because of their amenability to de novo reticular chemistry, metal-organic frameworks (MOFs) have become key materials in this area. However, their usefulness is often limited by low chemical stability, conductivity and inappropriate pore sizes. Conductive two-dimensional (2D) materials with robust structural skeletons and/or functionalized surfaces can form stabilizing interactions with MOF components, enabling the fabrication of MOF nanocomposites with tunable pore characteristics. Graphene and its functional derivatives are the largest class of 2D materials and possess remarkable compositional versatility, structural diversity, and controllable surface chemistry. Here, we critically review current knowledge concerning the growth, structure, and properties of graphene derivatives, MOFs, and their graphene@MOF composites as well as the associated structure-property-performance relationships. Synthetic strategies for preparing graphene@MOF composites and tuning their properties are also comprehensively reviewed together with their applications in gas storage/separation, water purification, catalysis (organo-, electro-, and photocatalysis), and electrochemical energy storage and conversion. Current challenges in the development of graphene@MOF hybrids and their practical applications are addressed, revealing areas for future investigation. We hope that this review will inspire further exploration of new graphene@MOF hybrids for energy, electronic, biomedical, and photocatalysis applications as well as studies on previously unreported properties of known hybrids to reveal potential "diamonds in the rough".

Advanced perspectives on MXene composite nanomaterials: Types synthetic methods, thermal energy utilization and 3D-printed techniques

MXene, 2D material, can be synthesized as single flake with 1 nm thickness by using phase change material, polymer and graphene oxide. Meanwhile, the MXene and its composite derivative materials have been applied widely in electro-to-thermal conversion, photo-to-thermal conversion, thermal energy storage, and 3D printing ink aspects. Furthermore, the forward-looking utilization of the MXene nanomaterials in hydrogen energy storage, radio frequency field application, CO₂ capture and remediation of environmental pollution, is explored. This article reveals that the efficiencies of the photo-to-thermal and electro-to-thermal energy conversions with the MXene nanomaterials could reach about 80-90%. In parallel, it is demonstrated that the MXene printed ink has the excellent rheological property and high viscosity and stability of liquid, which contribute to arranging the multi-dimensional architectures with functional materials and controlling the flow rate of the MXene ink in the range of 0.03-0.15 mL/min for speedily printing and various printing structures.

Biopolymer-based electrospun fibers in electrochemical devices: versatile platform for energy, environment, and health monitoring

Electrochemical power tools are regarded as essential keys in a world that is becoming increasingly reliant on fossil fuels in order to meet the challenges of rapidly depleting fossil fuel supplies. Additionally, due to the industrialization of societies and the growth of diseases, the need for sensitive, reliable, inexpensive, and portable sensors and biosensors for noninvasive monitoring of human health and environmental pollution is felt more than ever before. In recent decades, electrospun fibers have emerged as promising candidates for the fabrication of highly efficient electrochemical devices, such as actuators, batteries, fuel cells, supercapacitors, and biosensors. Meanwhile, the use of synthetic polymers in the fabrication of versatile electrochemical devices has raised environmental concerns, leading to an increase in the quest for natural polymers. Natural polymers are primarily derived from microorganisms and plants. Despite the challenges of processing bio-based electrospun fibers, employing natural nanofibers in the fabrication of electrochemical devices has garnered tremendous attention in recent years. Here, various natural polymers and the strategies employed to fabricate various electrospun biopolymers are briefly covered. The recent advances and research strategies used to apply the bio-based electrospun membranes in different electrochemical devices are carefully summarized, along with the scopes in various advanced technologies. A comprehensive and critical discussion about the use of biopolymer-based electrospun fibers as the potential alternative to non-renewable ones in future technologies is briefly highlighted. This review will serve as a field opening platform for using different biopolymer-based electrospun fibers to advance the electrochemical device-based renewable and sustainable technologies, which will be of high interest to a large community. Accordingly, future studies should focus on feasible and cost-effective extraction of biopolymers from natural resources as well as fabrication of high-performance nanofibrous biopolymer-based components applicable in various electrochemical devices.

Waste PET Plastic-Derived CoNi-Based Metal-Organic Framework as an Anode for Lithium-Ion Batteries

Recycling waste PET plastics into metal-organic frameworks is conducive to both pollution alleviation and sustainable economic development. Herein, we have utilized waste PET plastic to synthesize CoNi-MOF applied to lithium battery anode materials via a low-temperature solvothermal method for the first time. The preparation process is effortless, and the sources' conversion rate can reach almost 100%. In addition, the anode performance of MOFs with various Co/Ni mole ratios was investigated. The as-synthesized Co0.8Ni-MOF exhibits excellent crystallinity, purity, and electrochemical performance. The initial discharge and charge capacities are 2496 and 1729 mAh g-1, respectively. Even after 200 cycles, the Co0.8Ni-MOF electrode can exhibit a high Coulombic efficiency of over 99%. Consequently, given the environmental and economic benefits, the Co0.8Ni-MOF derived from waste PET plastic is thought to be an appealing anode material for lithium-ion batteries.

High-Entropy Oxide Derived from Metal-Organic Framework as a Bifunctional Electrocatalyst for Efficient Urea Oxidation and Oxygen Evolution Reactions

High-entropy oxides (HEOs) offer unique features through a combination of incompatible metal cations to a single crystalline lattice. Owing to their special characteristics such as abundant cation compositions, high entropy stabilization, chemical and thermal stability, and lattice distortion effect, they have drawn ever-increasing attention for various applications. However, very few studies have been reported for catalytic application, and developing HEOs with large surface areas for efficient catalytic application is still in infancy. Herein, we design nanostructured HEO of (FeNiCoCrCu)₃O₄ using metal-organic frameworks (MOFs) as sacrificial templates to achieve a large surface area, high density of exposed active sites, and more oxygen vacancies. Single-crystalline phase HEOs with surface area as large as 206 m² g^-1 are produced and further applied as bifunctional electrocatalysts for the urea oxidation reaction (UOR) and oxygen evolution reaction (OER). Benefiting from enhanced oxygen vacancies and a large surface area with abundant exposed active sites, the optimized HEO exhibited excellent electrocatalytic activity toward UOR with a very low potential of 1.35 V at the current density of 10 mA cm^-2 and showed long-term stability for 36 h operation, making a significant catalytic performance over previously reported HEOs. Moreover, the HEO demonstrated an efficient catalytic performance toward OER with a low overpotential of 270 mV at 10 mA cm^-2 and low Tafel slope of 49 mV dec^-1. The excellent catalytic activity is ascribed to the starting MOF precursor and favorable high-entropy effect.

Materials for Chemical Sensing: A Comprehensive Review on the Recent Advances and Outlook Using Ionic Liquids, Metal–Organic Frameworks (MOFs), and MOF-Based Composites

The ability to measure and monitor the concentration of specific chemical and/or gaseous species (i.e., “analytes”) is the main requirement in many fields, including industrial processes, medical applications, and workplace safety management. As a consequence, several kinds of sensors have been developed in the modern era according to some practical guidelines that regard the characteristics of the active (sensing) materials on which the sensor devices are based. These characteristics include the cost-effectiveness of the materials’ manufacturing, the sensitivity to analytes, the material stability, and the possibility of exploiting them for low-cost and portable devices. Consequently, many gas sensors employ well-defined transduction methods, the most popular being the oxidation (or reduction) of the analyte in an electrochemical reactor, optical techniques, and chemiresistive responses to gas adsorption. In recent years, many of the efforts devoted to improving these methods have been directed towards the use of certain classes of specific materials. In particular, ionic liquids have been employed as electrolytes of exceptional properties for the preparation of amperometric gas sensors, while metal–organic frameworks (MOFs) are used as highly porous and reactive materials which can be employed, in pure form or as a component of MOF-based functional composites, as active materials of chemiresistive or optical sensors. Here, we report on the most recent developments relative to the use of these classes of materials in chemical sensing. We discuss the main features of these materials and the reasons why they are considered interesting in the field of chemical sensors. Subsequently, we review some of the technological and scientific results published in the span of the last six years that we consider among the most interesting and useful ones for expanding the awareness on future trends in chemical sensing. Finally, we discuss the prospects for the use of these materials and the factors involved in their possible use for new generations of sensor devices.

Transformation of metal-organic frameworks with retained networks

Metal-organic frameworks (MOFs) are a class of crystalline porous coordination materials with systematically designable network structures and tunable properties, demonstrating great potential for applications in diverse fields. However, the generally poor stability of dynamic coordination bonds in MOFs hinders their practical applications in harsh environments. Although MOFs have been used as precursors and templates for the production of various derivatives with enhanced stability via thermal treatment, the extreme thermolytic conditions often destroy the network structures, consequently resulting in obvious decreases in porosity and surface areas with undesired characteristics. This feature article discusses the generally used pathways for the transformation of MOFs and the advanced fabrication methods for the production of various MOF-derived materials. We particularly emphasize the recent progress in the designed strategies for customization and derivation tailoring of MOFs, which could produce MOF-derived functional materials with remaining framework skeletons and inherited characteristics (surface area, porosity and properties) of the parent MOFs, exhibiting great promise for practical applications.

Structural and molecular properties of complexes of biomolecules and metal-organic frameworks: dispersion-corrected DFT treatment

Investigation of complexes of nanostructured materials and biomolecules has attracted much attention by various researchers as it can contribute to coherent growth and extended application of nanostructures in different technologies. In this research, following a comprehensive approach, we examined the interaction between different amino acids and metal-organic frameworks (MOFs) at atomic scale using computational chemistry. For this purpose, we employed the density functional theory (DFT-D2) calculations to afford a molecular description of the interaction properties of the amino acids and MOF-5 by examining the interaction energy and the electronic structure of the amino acid/MOF complexes. We found strong interactions between the amino acids and MOF through their polar groups as well as aromatic rings in the gas phase. However, our findings were significantly different in solvent media, where water molecules prevent the amino acids from approaching the active sites of MOF, causing weak attractions between them. The evaluation of nature of interaction between the amino acids and MOF by the atoms-in-molecules (AIM) theory shows that the electrostatic attractions are the main force contributing to bond formation between the interacting entities. Furthermore, our DFT-PBE model of theory was validated against the comprehensive MP2 quantum level of theory.

Hierarchical porous metal–organic gels and derived materials: from fundamentals to potential applications

This review summarizes recent progress in the development and applications of metal–organic gels (MOGs) and their hybrids and derivatives dividing them into subclasses and discussing their synthesis, design and structure–property relationship.

Synergetic effect of ZnCo2O4/inorganic salt as a sustainable catalyst system for CO2 utilization

Currently, it is essential to consider the rapidly increasing emission of CO₂ into the atmosphere, causing major environmental issues such as climate change and global warming. In this work, we have developed the binary catalyst system (ZnCo₂O₄/inorganic salt) for chemical fixation of CO₂ with epoxides into cyclic carbonates without solvent, and all reactions were performed on a large scale using a 100 ml batch reactor. Two mesoporous catalysts of ZnCo₂O₄ with different architecture, such as flakes (ZnCo-F) and spheres (ZnCo-S) were synthesized and utilized as a heterogeneous catalyst for cycloaddition reaction. The bifunctional property of catalysts is mainly attributed to strong acidic and basic properties confirmed by TPD (NH₃ & CO₂) analysis. The ZnCo-F catalyst exhibited excellent conversion of propylene oxide (99.9%) with good corresponding selectivity of propylene carbonate (≥99%) in the presence of inorganic salt (KI) at 120 °C, 2 MPa, 3 h. In addition, ZnCo-F catalyst demonstrated good catalytic applicability towards the various substrates scope of the epoxide. Furthermore, the catalytic properties were examined by evaluating the reaction parameter such as catalyst loading, pressure, temperature and time. The proposed catalyst exhibited good reusability for cycloaddition reaction without significant change in its catalytic activity and proposed a possible reaction mechanism for chemical fixation of CO₂ with epoxide into cyclic carbonate over ZnCo-F/KI.

Layered Niobium Oxide Hydrate Anode with Excellent Performance for Lithium-Ion Batteries

Benefiting from the advantages of cost-effectiveness and sustainability, lithium-ion batteries (LIBs) are recognized as a next-generation energy technology with great development potential. Herein, niobium oxide hydrate (H₃ONb₃O₈) synthesized by a facile and inexpensive solvothermal method is proposed as the anode of LIBs. It is a layered two-dimensional material composed of negatively charged two-dimensional lamellae and positively charged interlayer hydronium ions. The former consist of NbO₆ octahedral units connected by bridging oxygen. Because of the mutual effect of hydronium ions and niobium oxide quantum dots, niobium oxide hydrate exhibits excellent electrochemical activity when used as an anode material. This compound is first applied to lithium-ion batteries, obtaining a high specific capacity (1232 mAh g^-1) at 100 mA g^-1 and maintaining an outstanding performance after 200 cycles. Therefore, this work not only proposes a simple preparation method of niobium oxide hydrate but also expands the variety of high-performance anode materials.

Tuning Electrocatalytic Aptitude by Incorporating α-MnO2 Nanorods in Cu-MOF/rGO/CuO Hybrids: Electrochemical Sensing of Resorcinol for Practical Applications

In this study, Cu-MOF/rGO/CuO/α-MnO₂ nanocomposites have been fabricated by a one-step hydrothermal method and used in the voltammetric detection of resorcinol (RS). The poor conductivity of MOFs in the field of electrochemical sensing is still a major challenge. A series of Cu-MOF/rGO/CuO/α-MnO₂ nanocomposites have been synthesized with varying fractions of rGO and with a fixed amount of α-MnO₂ via a facile method. These nanocomposites are well characterized using some sophisticated characterization techniques. The as-prepared nanohybrids have strongly promoted the redox reactions at the electrode surface due to their synergistic effects of improved conductivity, high electrocatalytic activity, an enlarged specific surface area, and a plethora of nanoscale level interfacial collaborations. The electrode modified with Cu-MOF/rGO/CuO/α-MnO₂ has revealed superior electrochemical properties demonstrating linear differential pulse voltammetry (DPV) responses from a 0.2 to 22 μM RS concentration range (R² = 0.999). The overall results of this sensing podium have shown excellent stability, good recovery, and a low detection limit of 0.2 μM. With excellent sensing performance achieved, the practicability of the sensor has been evaluated to detect RS in commercial hair color samples as well as in tap water and river water samples. Therefore, we envision that our hybrid nanostructures synthesized by the structural integration strategy will open new horizons in material synthesis and biosensing platforms.

Facile synthesis of a rod-like porous carbon framework confined magnetite nanoparticle composite for superior lithium-ion storage

This work demonstrates a streamlined method to engineer a rod-like porous carbon framework (RPC) confined magnetite nanoparticles composite (Fe₃O₄/RPC) starting from metallic iron and gallic acid (GA) solution. First, a mild redox reaction was triggered between Fe and GA to prepare a rod-shaped metal-organic framework (MOF) ferric gallate sample (Fe-GA). Then, the Fe-GA sample was calcinated to obtain a prototypic RPC supported metal iron nanoparticle intermediate sample (Fe/RPC). Finally, the Fe₃O₄/RPC composite was synthesized after a simple hydrothermal reaction. The Fe₃O₄/RPC composite exhibited competitive electrochemical behaviors, which has a high gravimetric capacity of 1140 mAh·g^-1 at a high charge and discharge current of 1000 mA·g^-1 after 300 cycles. The engineered RPC supportive matrix not only offers adequate voids to buffer the volume expansion from inside well-dispersed Fe₃O₄ nanoparticles, but also facilitates both the ionic and electronic transport during the electrochemical reactions. The overall material synthesis involves of no hazardous or expensive chemicals, which can be regarded to be a scalable and green approach. The obtained samples have a good potential to be further developed for wider applications.

A review on metal-organic framework-derived anode materials for potassium-ion batteries

In recent years, metal-organic frameworks (MOFs) have been widely used in the field of electrochemical energy storage and conversion because of their excellent properties, such as high specific surface area, adjustable pore size, high porosity, structural diversity, and functional controllability. This paper reviews the applications of metal-organic framework-derived composites such as nitrogen-doped carbon, transition metal sulfides, transition metal selenides, transition metal phosphides and metal selenium compound modifications in potassium ion batteries (PIBs) as anode electrode materials. A variety of MOF-derived composites with different structures and morphologies based on several types of ligands, including 2-methylimidazole, aromatic carboxylic acids, and ferricyanide, have been discussed. Moreover, the current challenges faced by MOF-derived materials and possible countermeasures are proposed.