Structure of copper sites in zeolites examined by Fourier and wavelet transform analysis of EXAFS

Influence of strong π-acceptor ligands on Cr-K-edge X-ray absorption spectral signatures and consequences for the interpretation of surface sites in the Phillips catalyst

X-ray absorption spectroscopy (XAS) has been central to the study of the Phillips polymerization catalyst (CrO3/SiO2). As Cr K-edge XAS signatures are sensitive to the oxidation state, geometry and types of ligands on surface (active) sites, the superposition of these effects makes their interpretation challenging. Notably, CO has been particularly used as a reductant to generate low valent Cr sites from CrO3/SiO2 and as a structural IR probe for analysing reduced Cr surface sites. Hence, it is essential to establish a solid understanding of the spectroscopic impact of CO on low-valent Cr sites. We thus built a series of fully characterized low-valent Cr molecular compounds bearing isoelectronic isocyanide ligands in place of CO, with the goal of understanding the effect of the coordination of π-acceptor ligands on the XANES signature of Cr sites. Cr K-edge spectra supplemented with DFT calculations elucidate the effect of the coordination of π-acceptor ligands on XAS signatures, giving a sharp resonance at the white line while modifying the fine structure due to short Cr-C distances and stability of low-spin Cr(ii/iii) species. The isocyanide references allow the deconvolution of the XAS spectra of the reduced CrO3/SiO2 catalyst by evaluating the types of surface species and relative amounts of bound CO at different CO pressures and temperatures.

Atomically Dispersed Iron-Copper Dual-Metal Sites Synergistically Boost Carbonylation of Methane

The direct liquid-phase oxidative carbonylation of methane, utilizing abundant natural gas, offers a mild and straightforward alternative. However, most catalysts proposed for this process suffer from low acetic acid yields due to few active sites and rapid C1 oxygenate generation, impeding their industrial feasibility. Herein, we report a highly efficient 0.1Cu/Fe-HZSM-5-TF (TF denotes template-free synthesis) catalyst featuring exclusively mononuclear Fe and Cu anchored in the ZSM-5 channels. Under optimized conditions, the catalyst achieved an unprecedented acetic acid yield of 40.5 mmol gcat -1 h-1 at 50 °C, tripling the previous records of 12.0 mmol gcat -1 h-1. Comprehensive characterization, isotope-labeled experiments and density functional theory (DFT) calculations reveal that the homogeneous mononuclear Fe sites are responsible for the activation and oxidation of methane, while the neighboring Cu sites play a key role in retarding the oxidation process, promoting C-C coupling for effective acetic acid synthesis. Furthermore, the methyl-group carbon in acetic acid originates solely from methane, while its carbonyl-group carbon is derived exclusively from CO, rather than the conversion of other C1 oxygenates. The proposed bimetallic catalyst design not only overcomes the limitations of current catalysts but also generalizes the oxidative carbonylation of other alkanes, demonstrating promising advancements in sustainable chemical synthesis.

Formation of paired Ga sites in CHA-type zeolite frameworks via a transcription-induced method

Paired Ga sites represented by the Ga-O-Si-O-Ga sequence were firstly formed intentionally in CHA-type zeolite frameworks via the transcription of pre-formed paired Ga species in a Ga-rich amorphous silica-gallia under seed-assisted hydrothermal conditions. Such paired Ga sites behaved as ion-exchange sites for capturing divalent cation, Co2+.

Selective Oxidative Dehydrogenation of Ethane and Propane over Copper-Containing Mordenite: Insights into Reaction Mechanism and Product Protection

Copper(II)-containing mordenite (CuMOR) is capable of activation of C-H bonds in C1 -C3 alkanes, albeit there are remarkable differences between the functionalization of ethane and propane compared to methane. The reaction of ethane and propane with CuMOR results in the formation of ethylene and propylene, while the reaction of methane predominantly yields methanol and dimethyl ether. By combining in situ FTIR and MAS NMR spectroscopies as well as time-resolved Cu K-edge X-ray absorption spectroscopy, the reaction mechanism was derived, which differs significantly for each alkane. The formation of ethylene and propylene proceeds via oxidative dehydrogenation of the corresponding alkanes with selectivity above 95 % for ethane and above 85 % for propane. The formation of stable π-complexes of olefins with CuI sites, formed upon reduction of CuII -oxo species, protects olefins from further oxidation and/or oligomerization. This is different from methane, the activation of which proceeds via oxidative hydroxylation leading to the formation of surface methoxy species bonded to the zeolite framework. Our findings constitute one of the major steps in the direct conversion of alkanes to important commodities and open a novel research direction aiming at the selective synthesis of olefins.

Understanding C-H activation in light alkanes over Cu-MOR zeolites by coupling advanced spectroscopy and temperature-programmed reduction experiments

The direct activation of methane to methanol (MTM) proceeds through a chemical-looping process over Cu-oxo sites in zeolites. Herein, we extend the overall understanding of oxidation reactions over metal-oxo sites and C-H activation reactions by pinpointing the evolution of Cu species during reduction. To do so, a set of temperature-programmed reduction experiments were performed with CH4, C2H6, and CO. With a temperature ramp, the Cu reduction could be accelerated to detect changes in Cu speciation that are normally not detected due to the slow CH4 adsorption/interaction during MTM (∼200 °C). To follow the Cu-speciation with the three reductants, X-ray absorption spectroscopy (XAS), UV-vis and FT-IR spectroscopy were applied. Multivariate curve resolution alternating least-square (MCR-ALS) analysis was used to resolve the time-dependent concentration profiles of pure Cu components in the X-ray absorption near edge structure (XANES) spectra. Within the large datasets, as many as six different CuII and CuI components were found. Close correlations were found between the XANES-derived CuII to CuI reduction, CH4 consumption, and CO2 production. A reducibility-activity relationship was also observed for the Cu-MOR zeolites. Extended X-ray absorption fine structure (EXAFS) spectra for the pure Cu components were furthermore obtained with MCR-ALS analysis. With wavelet transform (WT) analysis of the EXAFS spectra, we were able to resolve the atomic speciation at different radial distances from Cu (up to about 4 Å). These results indicate that all the CuII components consist of multimeric CuII-oxo sites, albeit with different Cu-Cu distances.

Atomic Insights into the Cu Species Supported on Zeolite for Direct Oxidation of Methane to Methanol via Low-Damage HAADF-STEM

Precise determination of the structure-property relationship of zeolite-based metal catalysts is critical for the development toward practical applications. However, the scarcity of real-space imaging of zeolite-based low-atomic-number (LAN) metal materials due to the electron-beam sensitivity of zeolites has led to continuous debates regarding the exact LAN metal configurations. Here, a low-damage high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) imaging technique is employed for direct visualization and determination of LAN metal (Cu) species in ZSM-5 zeolite frameworks. The structures of the Cu species are revealed based on the microscopy evidence and also proved by the complementary spectroscopy results. The correlation between the characteristic Cu size in Cu/ZSM-5 catalysts and their direct oxidation of methane to methanol reaction properties is unveiled. As a result, the mono-Cu species stably anchored by Al pairs inside the zeolite channels are identified as the key structure for higher C1 oxygenates yield and methanol selectivity for direct oxidation of methane. Meanwhile, the local topological flexibility of the rigid zeolite frameworks induced by the Cu agglomeration in the channels is also revealed. This work exemplifies the combination of microscopy imaging and spectroscopy characterization serves as a complete arsenal for revealing structure-property relationships of the supported metal-zeolite catalysts.

Ultrahigh Mass Activity Pt Entities Consisting of Pt Single atoms, Clusters, and Nanoparticles for Improved Hydrogen Evolution Reaction

Platinum is one of the best-performing catalysts for the hydrogen evolution reaction (HER). However, high cost and scarcity severely hinder the large-scale application of Pt electrocatalysts. Constructing highly dispersed ultrasmall Platinum entities is thereby a very effective strategy to increase Pt utilization and mass activities, and reduce costs. Herein, highly dispersed Pt entities composed of a mixture of Pt single atoms, clusters, and nanoparticles are synthesized on mesoporous N-doped carbon nanospheres. The presence of Pt single atoms, clusters, and nanoparticles is demonstrated by combining among others aberration-corrected annular dark-field scanning transmission electron microscopy, X-ray absorption spectroscopy, and electrochemical CO stripping. The best catalyst exhibits excellent geometric and Pt HER mass activity, respectively ≈4 and 26 times higher than that of a commercial Pt/C reference and a Pt catalyst supported on nonporous N-doped carbon nanofibers with similar Pt loadings. Noteworthily, after optimization of the geometrical Pt electrode loading, the best catalyst exhibits ultrahigh Pt and catalyst mass activities (56 ± 3 A mg^-1 _Pt and 11.7 ± 0.6 A mg^-1 _Cat at -50 mV vs. reversible hydrogen electrode), which are respectively ≈1.5 and 58 times higher than the highest Pt and catalyst mass activities for Pt single-atom and cluster-based catalysts reported so far.

Accelerating Electron-Transfer Dynamics by TiO2 -Immobilized Reversible Single-Atom Copper for Enhanced Artificial Photosynthesis of Urea

Photocatalysis as a sustainable technology is expected to provide a novel sight for the green synthesis of urea directly using N₂ , CO₂ , and H₂ O under mild conditions. However, the fundamental issue of inefficient electron transfer in photocatalysis strongly hinders its feasibility, especially for the above multi-electron-demanding urea synthesis. Herein, an effective strategy of accelerating electron-transfer dynamics is reported by TiO₂ -immobilized reversible single-atom copper (denoted as Cu SA-TiO₂ ) to enhance the performance for photosynthesis of urea from N₂ , CO₂ , and H₂ O. As revealed by a series of quasi-in-situ characterizations (e.g., electron paramagnetic resonance, and wavelength-resolved and femtosecond time-resolved spectroscopies), the expedited dynamics behaviors originating from reversible single-atom copper in as-designed Cu SA-TiO₂ (electron extraction rate: over 30 times faster than the reference photocatalysts) allow the assurance of abundant and continual photogenerated electrons for multi-electron-demanding co-photoactivation of N₂ and CO₂ , resulting in considerable rates of urea production. The strategy above for improving the photoelectron-extraction ability of photocatalysts will offer a high-efficiency and promising route for artificial urea photosynthesis and other multi-electron-demanding photocatalytic reactions.

Research Progress on Sulfur Deactivation and Regeneration over Cu-CHA Zeolite Catalyst

Benefiting from the exceptional selective catalytic reduction of NOx with ammonia (NH3-SCR) activity, excellent N2 selectivity, and superior hydrothermal durability, the Cu2+-exchanged zeolite catalyst with a chabazite structure (Cu-CHA) has been considered the predominant SCR catalyst in nitrogen oxide (NOx) abatement. However, sulfur poisoning remains one of the most significant deterrents to the catalyst in real applications. This review summarizes the NH3-SCR reaction mechanism on Cu-CHA, including the active sites and the nature of hydrothermal aging resistance. On the basis of the NH3-SCR reaction mechanism, the review gives a comprehensive summary of sulfate species, sulfate loading, emitted gaseous composition, and the impact of exposure temperature/time on Cu-CHA. The nature of the regeneration of sulfated catalysts is also covered in this review. The review gives a valuable summary of new insights into the matching between the design of NH3-SCR activity and sulfur resistance, highlighting the opportunities and challenges presented by Cu-CHA. Guidance for future sulfur poisoning diagnosis, effective regeneration strategies, and a design for an efficient catalyst for the aftertreatment system (ATS) are proposed to minimize the deterioration of NOx abatement in the future. Finally, we call for more attention to be paid to the effects of PO43- and metal co-cations with sulfur in the ATS.

"Tree-Trunk" Design for Flexible Quasi-Solid-State Electrolytes with Hierarchical Ion-Channels Enabling Ultralong-Life Lithium-Metal Batteries

The construction of robust (quasi)-solid-state electrolyte (SSE) for flexible lithium-metal batteries is desirable but extremely challenging. Herein, a novel, flexible, and robust quasi-solid-state electrolyte (QSSE) with a "tree-trunk" design is reported for ultralong-life lithium-metal batteries (LMBs). An in-situ-grown metal-organic framework (MOF) layer covers the cellulose-based framework to form hierarchical ion-channels, enabling rapid ionic transfer kinetics and excellent durability. A conductivity of 1.36 × 10^-3  S cm^-1 , a transference number of 0.72, an electrochemical window of 5.26 V, and a good rate performance are achieved. The flexible LMBs fabricated with as-designed QSSEs deliver areal capacity of up to 3.1 mAh cm^-2 at the initial cycle with high mass loading of 14.8 mg cm^-2 in Li-NCM811 cells and can retain ≈80% capacity retention after 300 cycles. An ultralong-life of 3000 cycles (6000 h) is also achieved in Li-LiFePO₄ cells. This work presents a promising route in constructing a flexible QSSE toward ultralong-life LMBs, and also provides a design rationale for material and structure development in the area of energy storage and conversion.

Spectroscopic and QM/MM studies of the Cu(I) binding site of the plant ethylene receptor ETR1

Herein, we present, to our knowledge, the first spectroscopic characterization of the Cu(I) active site of the plant ethylene receptor ETR1. The x-ray absorption (XAS) and extended x-ray absorption fine structure (EXAFS) spectroscopies presented here establish that ETR1 has a low-coordinate Cu(I) site. The EXAFS resolves a mixed first coordination sphere of N/O and S scatterers at distances consistent with potential histidine and cysteine residues. This finding agrees with the coordination of residues C65 and H69 to the Cu(I) site, which are critical for ethylene activity and well conserved. Furthermore, the Cu K-edge XAS and EXAFS of ETR1 exhibit spectroscopic changes upon addition of ethylene that are attributed to modifications in the Cu(I) coordination environment, suggestive of ethylene binding. Results from umbrella sampling simulations of the proposed ethylene binding helix of ETR1 at a mixed quantum mechanics/molecular mechanics level agree with the EXAFS fit distance changes upon ethylene binding, particularly in the increase of the distance between H69 and Cu(I), and yield binding energetics comparable with experimental dissociation constants. The observed changes in the copper coordination environment might be the triggering signal for the transmission of the ethylene response.

Strikingly distinctive NH3-SCR behavior over Cu-SSZ-13 in the presence of NO2

Commercial Cu-exchanged small-pore SSZ-13 (Cu-SSZ-13) zeolite catalysts are highly active for the standard selective catalytic reduction (SCR) of NO with NH3. However, their activity is unexpectedly inhibited in the presence of NO2 at low temperatures. This is strikingly distinct from the NO2-accelerated NOx conversion over other typical SCR catalyst systems. Here, we combine kinetic experiments, in situ X-ray absorption spectroscopy, and density functional theory (DFT) calculations to obtain direct evidence that under reaction conditions, strong oxidation by NO2 forces Cu ions to exist mainly as CuII species (fw-Cu2+ and NH3-solvated CuII with high CNs), which impedes the mobility of Cu species. The SCR reaction occurring at these CuII sites with weak mobility shows a higher energy barrier than that of the standard SCR reaction on dynamic binuclear sites. Moreover, the NO2-involved SCR reaction tends to occur at the Brønsted acid sites (BASs) rather than the CuII sites. This work clearly explains the strikingly distinctive selective catalytic behavior in this zeolite system.

Assessing the Influence of Zeolite Composition on Oxygen-Bridged Diamino Dicopper(II) Complexes in Cu-CHA DeNOx Catalysts by Machine Learning-Assisted X-ray Absorption Spectroscopy

Cu-exchanged chabazite is the catalyst of choice for NO_x abatement in diesel vehicles aftertreatment systems via ammonia-assisted selective catalytic reduction (NH₃-SCR). Herein, we exploit in situ X-ray absorption spectroscopy powered by wavelet transform analysis and machine learning-assisted fitting to assess the impact of the zeolite composition on NH₃-mobilized Cu-complexes formed during the reduction and oxidation half-cycles in NH₃-SCR at 200 °C. Comparatively analyzing well-characterized Cu-CHA catalysts, we show that the Si/Al ratio of the zeolite host affects the structure of mobile dicopper(II) complexes formed during the oxidation of the [Cu^I(NH₃)₂]⁺ complexes by O₂. Al-rich zeolites promote a planar coordination motif with longer Cu-Cu interatomic distances, while at higher Si/Al values, a bent motif with shorter internuclear separations is also observed. This is paralleled by a more efficient oxidation at a given volumetric Cu density at lower Si/Al, beneficial for the NO_x conversion under NH₃-SCR conditions at 200 °C.

Single Atom Catalysts for Selective Methane Oxidation to Oxygenates

Direct conversion of methane (CH₄) to C_1-2 liquid oxygenates is a captivating approach to lock carbons in transportable value-added chemicals, while reducing global warming. Existing approaches utilizing the transformation of CH₄ to liquid fuel via tandemized steam methane reforming and the Fischer-Tropsch synthesis are energy and capital intensive. Chemocatalytic partial oxidation of methane remains challenging due to the negligible electron affinity, poor C-H bond polarizability, and high activation energy barrier. Transition-metal and stoichiometric catalysts utilizing harsh oxidants and reaction conditions perform poorly with randomized product distribution. Paradoxically, the catalysts which are active enough to break C-H also promote overoxidation, resulting in CO₂ generation and reduced carbon balance. Developing catalysts which can break C-H bonds of methane to selectively make useful chemicals at mild conditions is vital to commercialization. Single atom catalysts (SACs) with specifically coordinated metal centers on active support have displayed intrigued reactivity and selectivity for methane oxidation. SACs can significantly reduce the activation energy due to induced electrostatic polarization of the C-H bond to facilitate the accelerated reaction rate at the low reaction temperature. The distinct metal-support interaction can stabilize the intermediate and prevent the overoxidation of the reaction products. The present review accounts for recent progress in the field of SACs for the selective oxidation of CH₄ to C_1-2 oxygenates. The chemical nature of catalytic sites, effects of metal-support interaction, and stabilization of intermediate species on catalysts to minimize overoxidation are thoroughly discussed with a forward-looking perspective to improve the catalytic performance.

SO2 Poisoning of Cu-CHA deNO x Catalyst: The Most Vulnerable Cu Species Identified by X-ray Absorption Spectroscopy

Cu-exchanged chabazite zeolites (Cu-CHA) are effective catalysts for the NH3-assisted selective catalytic reduction of NO (NH3-SCR) for the abatement of NO x emission from diesel vehicles. However, the presence of a small amount of SO2 in diesel exhaust gases leads to a severe reduction in the low-temperature activity of these catalysts. To shed light on the nature of such deactivation, we characterized a Cu-CHA catalyst under well-defined exposures to SO2 using in situ X-ray absorption spectroscopy. By varying the pretreatment procedure prior to the SO2 exposure, we have selectively prepared CuI and CuII species with different ligations, which are relevant for the NH3-SCR reaction. The highest reactivity toward SO2 was observed for CuII species coordinated to both NH3 and extraframework oxygen, in particular for [CuII 2(NH3)4O2]2+ complexes. Cu species without either ammonia or extraframework oxygen ligands were much less reactive, and the associated SO2 uptake was significantly lower. These results explain why SO2 mostly affects the low-temperature activity of Cu-CHA catalysts, since the dimeric complex [CuII 2(NH3)4O2]2+ is a crucial intermediate in the low-temperature NH3-SCR catalytic cycle.

Engineering Catalytic Interfaces in Cuδ+/CeO2-TiO2 Photocatalysts for Synergistically Boosting CO2 Reduction to Ethylene

Photocatalytic CO₂ conversion into a high-value-added C₂ product is a highly challenging task because of insufficient electron deliverability and sluggish C-C coupling kinetics. Engineering catalytic interfaces in photocatalysts provides a promising approach to manipulate photoinduced charge carriers and create multiple catalytic sites for boosting the generation of C₂ product from CO₂ reduction. Herein, a Cu^δ+/CeO₂-TiO₂ photocatalyst that contains atomically dispersed Cu^δ+ sites anchored on the CeO₂-TiO₂ heterostructures consisting of highly dispersed CeO₂ nanoparticles on porous TiO₂ is designedly constructed by the pyrolytic transformation of a Cu²⁺-Ce³⁺/MIL-125-NH₂ precursor. In the designed photocatalyst, TiO₂ acts as a light-harvesting material for generating electron-hole pairs that are efficiently separated by CeO₂-TiO₂ interfaces, and the Cu-Ce dual active sites synergistically facilitate the generation and dimerization of *CO intermediates, thus lowering the energy barrier of C-C coupling. As a consequence, the Cu^δ+/CeO₂-TiO₂ photocatalyst exhibits a production rate of 4.51 μmol^-1·g_cat^-1·h^-1 and 73.9% selectivity in terms of electron utilization for CO₂ to C₂H₄ conversion under simulated sunlight, with H₂O as hydrogen source and hole scavenger. The photocatalytic mechanism is revealed by operando spectroscopic methods as well as theoretical calculations. This study displays the rational construction of heterogeneous photocatalysts for boosting CO₂ conversion and emphasizes the synergistic effect of multiple active sites in enhancing the selectivity of C₂ product.

Enhanced catalytic performance of spinel-type Cu-Mn oxides for benzene oxidation under microwave irradiation

Microwave-assisted heterogeneous catalytic oxidation of benzene was investigated over Cu-Mn spinel oxides. The spinel oxides were synthesized by a coprecipitation method from metal nitrate hydrolysis in a solution using tetramethylammonium hydroxide (TMAH) as a precipitation reagent. The catalysts were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, X-ray absorption fine structure, scanning electron microscopy, transmission electron microscope and H₂-temperature-programmed reduction studies. Microwave absorption by the Cu-Mn spinel oxide is mainly driven by dielectric losses (dielectric heating). Cu-Mn spinel oxide with a Cu/Mn ratio of 1 exhibited superior activity to single oxides under microwave heating, demonstrating lower apparent activation energy than that obtained under conventional heating. Microwave irradiation lowered the reaction temperature required for benzene oxidation compared with conventional heating. Transient tests were used to investigate the reactivity of oxygen species in the catalytic reaction, and the high reactivity of Cu-Mn spinel oxides was related to the high reactivity of lattice oxygen on the catalyst surface. The reactivity of the oxygen species was enhanced under microwave heating, leading to an enhanced benzene oxidation reaction. The combination of adsorption and catalytic oxidation processes using Cu-Mn spinel oxides and zeolites efficiently decomposed benzene at low concentrations.

Rational design of ZSM-5 zeolite containing a high concentration of single Fe sites capable of catalyzing the partial oxidation of methane with high turnover frequency

We successfully synthesized a Fe/ZSM-5 catalyst enabling conversion of methane to C1 oxygenates in record yields, and demonstrated that the fraction of the single Fe cation, as well as the Al distribution, are the powerful activity descriptors.

Copper Pairing in the Mordenite Framework as a Function of the CuI /CuII Speciation

A series of gas‐phase reactants is used to treat a Cu‐exchanged mordenite zeolite with the aim of studying the influence of the reaction environment on the formation of Cu pairs. The rearrangement of Cu ions to form multimeric sites as a function of their oxidation state was probed by X‐ray absorption spectroscopy (XAS) and also by applying advanced analysis through wavelet transform, a method able to specifically locate Cu–Cu interactions also in the presence of overlapping contributions from other scattering paths. The nature of the Cu‐oxo species formed upon oxidation was further crosschecked by DFT‐assisted fitting of the EXAFS data and by resonant Raman spectroscopy. Altogether, the Cu^I/Cu^II speciation clearly correlates with Cu proximity, with metal ion pairs quantitatively forming under an oxidative environment.

Encapsulation of CuO nanoparticles within silicalite-1 as a regenerative catalyst for transfer hydrogenation of furfural

Catalytic transfer hydrogenation (CTH) of biomass-derived furfural (FAL) to furfuryl alcohol is recognized as one of the most versatile techniques for biomass valorization. However, the irreversible sintering of metal sites under the high-temperature reaction or during the coke removal regeneration process poses a serious concern. Herein, we present a silicalite-1-confined ultrasmall CuO structure (CuO@silicalite-1) and then compared its catalytic efficiency against conventional surface-supported CuO structure (CuO/silicalite-1) toward CTF of FAL with alcohols. Characterization results revealed that CuO nanoparticles encapsulated within the silicalite-1 matrix are ∼1.3 nm in size in CuO@silicalite-1, exhibiting better dispersion as compared to that in the CuO/silicalite-1. The CuO@silicalite-1, as a result, exhibited nearly 100-fold higher Cu-mass-based activity than the CuO/silicalite-1 counterpart. More importantly, the activity of the CuO@silicalite-1 catalyst can be regenerated via facile calcination to remove the surface-bound carbon deposits, unlike the CuO/silicalite-1 that suffered severe deactivation after use and cannot be effectively regenerated.

•

Ultrasmall CuO NPs are encapsulated in silicalite-1 matrix for CTH of furfural

•

Encapsulated CuO catalyst shows impressive Cu-mass-based activity of ∼130 hr⁻¹

•

Carbon deposits can be easily removed without the obvious increase in CuO size

•

Strong Cu-Si interactions exist in silicalite-1-encapsulated CuO structure

Copper-Oxo Active Sites for Methane C-H Activation in Zeolites: Molecular Understanding of Impact of Methane Hydroxylation on UV-Vis Spectra

Here, we analyze changes in the optical spectra of activated copper-exchanged zeolites during methane activation with the Tamm-Dancoff time-dependent density functional theory, TDA-DFT, while using the ωB2PLYP functional. Two active sites, [Cu₂O]²⁺ and [Cu₃O₃]²⁺, were studied. For [Cu₂O]⁺, the 22 700 cm^-1 peak is associated with μ-oxo 2p → Cu 3d/4s charge transfer. Of the [Cu₂O]²⁺ methane C-H activation intermediates that we examined, only [Cu-O(H)(H)-Cu] and [Cu-O(H)(CH₃)-Cu] have spectra that match experimental observations. After methane activation, the μ-oxo 2p orbitals lose two electrons and become hybridized with methanol C 2p orbitals and/or H 1s orbitals. The frontier unoccupied orbitals become more Cu 4s/4p Rydberg-like, reducing overlap with occupied orbitals. These effects cause the disappearance of the 22 700 cm^-1 peak. For [Cu₃O₃]²⁺, the exact structures of the species formed after methane activation are unknown. Thus, we considered eight possible structures. Several of these provide a significant decrease in intensity near 23 000-38 000 cm^-1, as seen experimentally. Notably, these species involve either rebound of the separated methyl to a μ-oxo atom or its remote stabilization at a Brønsted acid site in exchange for the acidic proton. These spectral changes are caused by the same mechanism seen in [Cu₂O]²⁺ and are likely responsible for the observed reduced intensities near 23 000-38 000 cm^-1. Thus, TDA-DFT calculations with ωB2PLYP provide a molecular-level understanding of the evolution of copper-oxo active sites during methane-to-methanol conversion.

Identification of Kinetic and Spectroscopic Signatures of Copper Sites for Direct Oxidation of Methane to Methanol

Copper-exchanged zeolites of different topologies possess high activity in the direct conversion of methane to methanol via the chemical looping approach. Despite a large number of studies, identification of the active sites, and especially their intrinsic kinetic characteristics remain incomplete and ambiguous. In the present work, we collate the kinetic behavior of different copper species with their spectroscopic identities and track the evolution of various copper motifs during the reaction. Using time-resolved UV/Vis and in situ EPR, XAS, and FTIR spectroscopies, two types of copper monomers were identified, one of which is active in the reaction with methane, in addition to a copper dimeric species with the mono-μ-oxo structure. Kinetic measurements showed that the reaction rate of the copper monomers is somewhat slower than that of the dicopper mono-μ-oxo species, while the activation energy is two times lower.

Dynamic Interconversion of Metal Active Site Ensembles in Zeolite Catalysis

Catalysis science is founded on understanding the structure, number, and reactivity of active sites. Kinetic models that consider active sites to be static and noninteracting entities are routinely successful in describing the behavior of heterogeneous catalysts. Yet, active site ensembles often restructure in response to their external environment and even during steady-state catalytic turnover, sometimes requiring non-mean-field kinetic treatments to describe distance-dependent interactions among sites. Such behavior is being recognized more frequently in modern catalysis research, with the advent of experimental methods to quantify turnover rates with increasing precision, an expanding arsenal of operando characterization tools, and computational descriptions of atomic structure and motion at chemical potentials and timescales increasingly relevant to reaction conditions. This review focuses on dynamic changes to metal active site ensembles on zeolite supports, which are silica-based crystalline materials substituted with Al that generate binding sites for isolated and low-nuclearity metal site ensembles. Metal sites can become solvated and mobilized during reaction, facilitating interactions among sites that change their nuclearity and function. Such intersite communication can be regulated by the zeolite support, resulting in non-single-site and potentially non-mean-field kinetic behavior arising from mechanisms of catalytic action that combine elements of those canonically associated with homogeneous and heterogeneous catalysis.We discuss recent literature examples that document dynamic active site behavior in metal-zeolites and outline methodologies to identify and interpret such behavior. We conclude with our outlook on future research directions to develop this evolving branch of catalysis science and harness it for practical applications.

On the Cobalt Carbide Formation in a Co/TiO2 Fischer-Tropsch Synthesis Catalyst as Studied by High-Pressure, Long-Term Operando X-ray Absorption and Diffraction

Operando X-ray absorption spectroscopy (XAS) and X-ray diffraction (XRD) were performed on a Co/TiO2 Fischer-Tropsch synthesis (FTS) catalyst at 16 bar for (at least) 48 h time-on-stream in both a synchrotron facility and a laboratory-based X-ray diffractometer. Cobalt carbide formation was observed earlier during FTS with operando XAS than with XRD. This apparent discrepancy is due to the higher sensitivity of XAS to a short-range order. Interestingly, in both cases, the product formation does not noticeably change when cobalt carbide formation is detected. This suggests that cobalt carbide formation is not a major deactivation mechanism, as is often suggested for FTS. Moreover, no cobalt oxide formation was detected by XAS or XRD. In other words, one of the classical proposals invoked to explain Co/TiO2 catalyst deactivation could not be supported by our operando X-ray characterization data obtained at close to industrially relevant reaction conditions. Furthermore, a bimodal cobalt particle distribution was observed by high-angle annular dark-field scanning transmission electron microscopy and energy-dispersive X-ray analysis, while product formation remained relatively stable. The bimodal distribution is most probably due to the mobility and migration of the cobalt nanoparticles during FTS conditions.

Catalytic direct oxidation of methane to methanol by redox of copper mordenite

Catalytic production of CH₃OH by direct oxidation of CH₄ with O₂ was performed using Cu zeolites in a CH₄/O₂/H₂O flow reaction, where Cu-MOR exhibited relatively high CH₃OH production with the redox of Cu(i)/Cu(ii) species.

Insights into sulfur poisoning and regeneration of Cu-SSZ-13 catalysts: in situ Cu and S K-edge XAS studies

The temperature during sulfur poisoning affects the relation between total sulfur content and the fraction of sulfur-free copper in poisoned and regenerated Cu-SSZ-13 catalysts.

Structure and Reactivity of Oxygen-Bridged Diamino Dicopper(II) Complexes in Cu-Ion-Exchanged Chabazite Catalyst for NH3-Mediated Selective Catalytic Reduction

The NH3-mediated selective catalytic reduction (NH3-SCR) of NOx over Cu-ion-exchanged chabazite (Cu-CHA) catalysts is the basis of the technology for abatement of NOx from diesel vehicles. A crucial step in this reaction is the activation of oxygen. Under conditions for low-temperature NH3-SCR, oxygen only reacts with CuI ions, which are present as mobile CuI diamine complexes [CuI(NH3)2]+. To determine the structure and reactivity of the species formed by oxidation of these CuI diamine complexes with oxygen at 200 °C, we have followed this reaction, using a Cu-CHA catalyst with a Si/Al ratio of 15 and 2.6 wt% Cu, by X-ray absorption spectroscopies (XANES and EXAFS) and diffuse reflectance UV-Vis spectroscopy, with the support of DFT calculations and advanced EXAFS wavelet transform analysis. The results provide unprecedented direct evidence for the formation of a [Cu2(NH3)4O2]2+ mobile complex with a side-on μ-η2,η2-peroxo diamino dicopper(II) structure, accounting for 80-90% of the total Cu content. These [Cu2(NH3)4O2]2+ are completely reduced to [CuI(NH3)2]+ at 200 °C in a mixture of NO and NH3. Some N2 is formed as well, which suggests the role of the dimeric complexes in the low-temperature NH3-SCR reaction. The reaction of [Cu2(NH3)4O2]2+ complexes with NH3 leads to a partial reduction of the Cu without any formation of N2. The reaction with NO results in an almost complete reduction to CuI, under the formation of N2. This indicates that the low-temperature NH3-SCR reaction proceeds via a reaction of these complexes with NO.

EXAFS wavelet transform analysis of Cu-MOR zeolites for the direct methane to methanol conversion

An innovative approach in EXAFS analysis and fitting using wavelet transforms reveals local structure and nuclearity of Cu-species in zeolites.