Power to the protein: enhancing and combining activities using the Spy toolbox

Precision Engineering of the Co-immobilization of Enzymes for Cascade Biocatalysis

The design and orderly layered co-immobilization of multiple enzymes on resin particles remain challenging. In this study, the SpyTag/SpyCatcher binding pair was fused to the N-terminus of an alcohol dehydrogenase (ADH) and an aldo-keto reductase (AKR), respectively. A non-canonical amino acid (ncAA), p-azido-L-phenylalanine (p-AzF), as the anchor for covalent bonding enzymes, was genetically inserted into preselected sites in the AKR and ADH. Employing the two bioorthogonal counterparts of SpyTag/SpyCatcher and azide-alkyne cycloaddition for the immobilization of AKR and ADH enabled sequential dual-enzyme coating on porous microspheres. The ordered dual-enzyme reactor was subsequently used to synthesize (S)-1-(2-chlorophenyl)ethanol asymmetrically from the corresponding prochiral ketone, enabling the in situ regeneration of NADPH. The reactor exhibited a high catalytic conversion of 74 % and good reproducibility, retaining 80 % of its initial activity after six cycles. The product had 99.9 % ee, which that was maintained in each cycle. Additionally, the double-layer immobilization method significantly increased the enzyme loading capacity, which was approximately 1.7 times greater than that of traditional single-layer immobilization. More importantly, it simultaneously enabled both the purification and immobilization of multiple enzymes on carriers, thus providing a convenient approach to facilitate cascade biocatalysis.

SpyTag Peptide with Alkoxyl Aspartic Acids for pH-Dependent Activation of the SpyCatcher/Tag System

The SpyCatcher/SpyTag system is a protein pair that forms a covalent isopeptide bond without an additional energy supply. The ability to connect fused proteins makes this system an attractive tool for several protein engineering applications. Conditional activation of the SpyCatcher/SpyTag complex formation further expands the use of this system. Here, we evaluated the pH activation of SpyTag using alkoxyaspartic acids in the isopeptide-forming residue. We found that a peptide with an ethoxy group can be activated by hydrolysis under high pH conditions. However, the hydrolysis induces isoaspartate (isoAsp) formation, which is confirmed by an isoAsp-inserted short peptide. We overcame this problem by changing the C-terminal side of the aspartic acid position to Pro, which does not form isoAsp under high pH conditions. The findings of this study provide fundamental knowledge of the synthetic construction of the modified SpyTag peptide.

Engineering biomaterials for the recovery of rare earth elements

The escalating global demand for rare earth elements (REEs) and the overabundance of REE-containing waste require innovative technologies for REE recovery from waste to achieve a sustainable supply of REEs while reducing the environmental burden. Biosorption mediated by peptides or proteins has emerged as a promising approach for selective REE recovery. To date, multiple peptides and proteins with high REE-binding affinity and selectivity have been discovered, and various strategies are being exploited to engineer robust and reusable biosorptive materials for selective REE recovery. This review highlights recent advances in discovering and engineering peptides and proteins for REE recovery. Future research prospects and challenges are also discussed.

Overcoming Protein Orientation Mismatch Enables Efficient Nanoscale Light-Driven ATP Production

Adenosine triphosphate (ATP)-producing modules energized by light-driven proton pumps are powerful tools for the bottom-up assembly of artificial cell-like systems. However, the maximum efficiency of such modules is prohibited by the random orientation of the proton pumps during the reconstitution process into lipid-surrounded nanocontainers. Here, we overcome this limitation using a versatile approach to uniformly orient the light-driven proton pump proteorhodopsin (pR) in liposomes. pR is post-translationally either covalently or noncovalently coupled to a membrane-impermeable protein domain guiding orientation during insertion into preformed liposomes. In the second scenario, we developed a novel bifunctional linker, trisNTA-SpyTag, that allows for the reversible connection of any SpyCatcher-containing protein and a HisTag-carrying protein. The desired protein orientations are verified by monitoring vectorial proton pumping and membrane potential generation. In conjunction with ATP synthase, highly efficient ATP production is energized by the inwardly pumping population. In comparison to other light-driven ATP-producing modules, the uniform orientation allows for maximal rates at economical protein concentrations. The presented technology is highly customizable and not limited to light-driven proton pumps but applicable to many membrane proteins and offers a general approach to overcome orientation mismatch during membrane reconstitution, requiring little to no genetic modification of the protein of interest.

Geometric Antibody Engineering Reveals the Spatial Factor on the Efficacy of Bispecific T Cell Engagers

Bispecific antibodies (BsAbs) represent an emerging class of biologics that can recognize two different antigens or epitopes. T-cell engagers (TcEs) bind two targets in trans on the cell surface of the effector and target cell to induce proximal immune effects, opening exciting windows for immunotherapies. To date, the engineering of BsAbs has been mainly focused on tuning the molecular weight and valency. However, the effects of spatial factors on the biological functions of BsAbs have been less explored due to the lack of biochemical methods to precisely manipulate protein geometry. Here, we studied the geometric effects of the TcEs. First, by genetically inserting rigidly designed ankyrin repeat proteins into TcEs, we revealed that the efficacy progressively decreased as the spacer distance of the two binding domains increased. Then, we constructed 26 pairs of TcEs with the same size but varying orientations using click chemistry-mediated conjugation at different mutation sites. We found that linear ligation sites play a minor role in modulating cell-killing efficacy. Next, we rendered the TcEs' advanced topology by cyclization chemistry using the SpyTag/SpyCatcher pair or sortase ligation approaches. Cyclized TcEs were generally more potent than their linear counterparts. Particularly, sortase A cyclized TcEs, bearing a minimal tagging motif, exhibited better cell-killing efficacy in vitro and improved stability both in vitro and in vivo compared to the linear TcE. This work combines modern bioconjugation chemistry and protein engineering tools for antibody engineering, shedding light on the elusive spatial factors of BsAbs functionality.

Irreversible light-activated SpyLigation mediates split-protein assembly in 4D

The conditional assembly of split-protein pairs to modulate biological activity is commonly achieved by fusing split-protein fragments to dimerizing components that bring inactive pairs into close proximity in response to an exogenous trigger. However, current methods lack full spatial and temporal control over reconstitution, require sustained activation and lack specificity. Here light-activated SpyLigation (LASL), based on the photoregulation of the covalent SpyTag (ST)/SpyCatcher (SC) peptide-protein reaction, assembles nonfunctional split fragment pairs rapidly and irreversibly in solution, in engineered biomaterials and intracellularly. LASL introduces an ortho-nitrobenzyl(oNB)-caged lysine into SC's reactive site to generate a photoactivatable SC (pSC). Split-protein pairs of interest fused to pSC and ST are conditionally assembled via near-ultraviolet or pulsed near-infrared irradiation, as the uncaged SC can react with ST to ligate appended fragments. We describe procedures for the efficient synthesis of the photocaged amino acid that is incorporated within pSC (<5 days) as well as the design and cloning of LASL plasmids (1-4 days) for recombinant protein expression in either Escherichia coli (5-6 days) or mammalian cells (4-6 days), which require some prior expertise in protein engineering. We provide a chemoenzymatic scheme for appending bioorthogonal reactive handles onto E. coli-purified pSC protein (<4 days) that permits LASL component incorporation and patterned protein activation within many common biomaterial platforms. Given that LASL is irreversible, the photolithographic patterning procedures are fast and do not require sustained light exposure. Overall, LASL can be used to interrogate and modulate cell signaling in various settings.

SpyMask enables combinatorial assembly of bispecific binders

Bispecific antibodies are a successful and expanding therapeutic class. Standard approaches to generate bispecifics are complicated by the need for disulfide reduction/oxidation or specialized formats. Here we present SpyMask, a modular approach to bispecifics using SpyTag/SpyCatcher spontaneous amidation. Two SpyTag-fused antigen-binding modules can be precisely conjugated onto DoubleCatcher, a tandem SpyCatcher where the second SpyCatcher is protease-activatable. We engineer a panel of structurally-distinct DoubleCatchers, from which binders project in different directions. We establish a generalized methodology for one-pot assembly and purification of bispecifics in 96-well plates. A panel of binders recognizing different HER2 epitopes were coupled to DoubleCatcher, revealing unexpected combinations with anti-proliferative or pro-proliferative activity on HER2-addicted cancer cells. Bispecific activity depended sensitively on both binder orientation and DoubleCatcher scaffold geometry. These findings support the need for straightforward assembly in different formats. SpyMask provides a scalable tool to discover synergy in bispecific activity, through modulating receptor organization and geometry.

Artificial structural proteins: Synthesis, assembly and material applications

Structural proteins have evolved over billions of years and offer outstanding mechanical properties, such as resilience, toughness and stiffness. Advances in modular protein engineering, polypeptide modification, and synthetic biology have led to the development of novel biomimetic structural proteins to perform in biomedical and military fields. However, the development of customized structural proteins and assemblies with superior performance remains a major challenge, due to the inherent limitations of biosynthesis, difficulty in mimicking the complexed macroscale assembly, etc. This review summarizes the approaches for the design and production of biomimetic structural proteins, and their chemical modifications for multiscale assembly. Furthermore, we discuss the function tailoring and current applications of biomimetic structural protein assemblies. A perspective of future research is to reveal how the mechanical properties are encoded in the sequences and conformations. This review, therefore, provides an important reference for the development of structural proteins-mimetics from replication of nature to even outperforming nature.

Bioluminescent detection of viral surface proteins using branched multivalent protein switches

Fast and reliable virus diagnostics is key to prevent the spread of viruses in populations. A hallmark of viruses is the presence of multivalent surface proteins, a property that can be harnessed to control conformational switching in sensor proteins. Here, we introduce a new sensor platform (dark-LUX) for the detection of viral surface proteins consisting of a general bioluminescent framework that can be post-translationally functionalized with separately expressed binding domains. The platform relies on (1) plug-and-play bioconjugation of different binding proteins via SpyTag/SpyCatcher technology to create branched protein structures, (2) an optimized turn-on bioluminescent switch based on complementation of the split-luciferase NanoBiT upon target binding and (3) straightforward exploration of the protein linker space. The influenza A virus (IAV) surface proteins hemagglutinin (HA) and neuraminidase (NA) were used as relevant multivalent targets to establish proof of principle and optimize relevant parameters such as linker properties, choice of target binding domains and the optimal combination of the competing NanoBiT components SmBiT and DarkBiT. The sensor framework allows rapid conjugation and exchange of various binding domains including scFvs, nanobodies and de novo designed binders for a variety of targets, including the construction of a heterobivalent switch that targets the head and stem region of hemagglutinin. The modularity of the platform thus allows straightforward optimization of binding domains and scaffold properties for existing viral targets, and is well suited to quickly adapt bioluminescent sensor proteins to effectively detect newly evolving viral epitopes.

DNA-Nanostructure-Guided Assembly of Proteins into Programmable Shapes

The development of methods to synthesize artificial protein complexes with precisely controlled configurations will enable diverse biological and medical applications. Using DNA to link proteins provides programmability that can be difficult to achieve with other methods. Here, we use DNA origami as an "assembler" to guide the linking of protein-DNA conjugates using a series of oligonucleotide hybridization and displacement operations. We constructed several isomeric protein nanostructures, including a dimer, two types of trimer structures, and three types of tetramer assemblies, on a DNA origami platform by using a C3-symmetric building block composed of a protein trimer modified with DNA handles. Our approach expands the scope for the precise assembly of protein-based nanostructures and will enable the formulation of functional protein complexes with stoichiometric and geometric control.

Dimer Stabilization by SpyTag/SpyCatcher Coupling of the Reductase Domains of a Chimeric P450 BM3 Monooxygenase from Bacillus spp. Improves its Stability, Activity, and Purification

The vast majority of known enzymes exist as oligomers, which often gives them high catalytic performance but at the same time imposes constraints on structural conformations and environmental conditions. An example of an enzyme with a complex architecture is the P450 BM3 monooxygenase CYP102A1 from Bacillus megaterium. Only active as a dimer, it is highly sensitive to dilution or common immobilization techniques. In this study, we engineered a thermostable P450BM3 chimera consisting of the heme domain of a CYP102A1 variant and the reductase domain of the homologous CYP102A3. The dimerization of the hybrid was even weaker compared to the corresponding CYP102A1 variant. To create a stable dimer, we covalently coupled the C-termini of two monomers of the chimera via SpyTag003/SpyCatcher003 interaction. As a result, purification, thermostability, pH stability, and catalytic activity were improved. Via a bioorthogonal two-step affinity purification, we obtained high purity (94 %) of the dimer-stabilized variant being robust against heme depletion. Long-term stability was increased with a half-life of over 2 months at 20 °C and 80-90 % residual activity after 2 months at 5 °C. Most catalytic features were retained with even an enhancement of the overall activity by ~2-fold compared to the P450BM3 chimera without SpyTag003/SpyCatcher003.

Nucleic Acid-based Enzyme Cascades-Current Trends and Future Perspectives

The natural micro- and nanoscale organization of biomacromolecules is a remarkable principle within living cells, allowing for the control of cellular functions by compartmentalization, dimensional diffusion and substrate channeling. In order to explore these biological mechanisms and harness their potential for applications such as sensing and catalysis, molecular scaffolding has emerged as a promising approach. In the case of synthetic enzyme cascades, developments in DNA nanotechnology have produced particularly powerful scaffolds whose addressability can be programmed with nanometer precision. In this minireview, we summarize recent developments in the field of biomimetic multicatalytic cascade reactions organized on DNA nanostructures. We emphasize the impact of the underlying design principles like DNA origami, efficient strategies for enzyme immobilization, as well as the importance of experimental design parameters and theoretical modeling. We show how DNA nanostructures have enabled a better understanding of diffusion and compartmentalization effects at the nanometer length scale, and discuss the challenges and future potential for commercial applications.

Enzymatic Peptide and Protein Bromination: The BromoTrp Tag

Bio-orthogonal reactions for modification of proteins and unprotected peptides are of high value in chemical biology. The combination of enzymatic halogenation with transition metal-catalyzed cross-coupling provides a feasible approach for the modification of proteins and unprotected peptides. By a semirational protein engineering approach, variants of the tryptophan 6-halogenase Thal were identified that enable efficient bromination of peptides with a C-terminal tryptophan residue. The substrate scope was explored using di-, tri-, and tetrapeptide arrays, leading to the identification of an optimized peptide tag we named BromoTrp tag. This tag was introduced into three model proteins. Preparative scale post-translational bromination was possible with only a single cultivation and purification step using the brominating E. coli coexpression system Brocoli. Palladium-catalyzed Suzuki-Miyaura cross-coupling of the bromoarene was achieved with Pd nanoparticle catalysts at 37 °C, highlighting the rich potential of this strategy for bio-orthogonal functionalization and conjugation.

Using CombiCells, a platform for titration and combinatorial display of cell surface ligands, to study T-cell antigen sensitivity modulation by accessory receptors

Understanding cellular decisions due to receptor-ligand interactions at cell-cell interfaces has been hampered by the difficulty of independently varying the surface density of multiple different ligands. Here, we express the synthetic binder protein SpyCatcher, designed to form spontaneous covalent bonds with interactors carrying a Spytag, on the cell surface. Using this, we show that addition of different concentrations and combinations of native Spytag-fused ligands allows for the combinatorial display of ligands on cells within minutes. We use this combinatorial display of cell surface ligands-called CombiCells-to assess T cell antigen sensitivity and the impact of T cell co-stimulation and co-inhibition receptors. We find that the T cell receptor (TCR) displayed greater sensitivity to peptides on major-histocompatibility complexes (pMHC) than synthetic chimeric antigen receptor (CARs) and bi-specific T cell engager (BiTEs) display to their target antigen, CD19. While TCR sensitivity was greatly enhanced by CD2/CD58 interactions, CAR sensitivity was primarily but more modestly enhanced by LFA-1/ICAM-1 interactions. Lastly, we show that PD-1/PD-L1 engagement inhibited T cell activation triggered solely by TCR/pMHC interactions, as well as the amplified activation induced by CD2 and CD28 co-stimulation. The ability to easily produce cells with different concentrations and combinations of ligands should accelerate the study of receptor-ligand interactions at cell-cell interfaces.

The SpyCatcher-SpyTag interaction mediates tunable anti-tumor cytotoxicity of NK cells

Chimeric antigen receptor (CAR)-modified T and NK cell immunotherapy is a promising approach for cancer treatment. Due to the lack of tunability in anti-tumor activity, conventional CAR therapies have limited efficacy at low tumor antigen densities. To tune the CAR response to tumor cell surface antigens, we have developed a split CAR using the SpyCatcher-SpyTag system. The SpyCatcher serves as the ectodomain to constitute a SpyCatcher-CAR (SpyCAR), while SpyTag is attached to the antibodies that recognize tumor antigens. With dimerization mediated by SpyCatcher and SpyTag, the number and activation level of SpyCARs recruited by tumor antigens depends on the SpyTag number in the "antibody-SpyTag" fusion protein. The results demonstrated that the increasing number of SpyTags effectively enhanced the cytotoxicity of SpyCAR-NK92 cells against target cells. The development of SpyCAR with tunable cytotoxicity provides a novel strategy for CAR-based tumor immunotherapies.

Visible Light-Induced Specific Protein Reaction Delineates Early Stages of Cell Adhesion

Light is well-established for control of bond breakage but not for control of specific bond formation in complex environments. We previously engineered the diffusion-limited reactivity of the SpyTag003 peptide with its protein partner SpyCatcher003 through spontaneous isopeptide bond formation. This system enables precise and irreversible assembly of biological building blocks with applications from biomaterials to vaccines. Here we establish a system for the rapid control of this amide bond formation with visible light. We have generated a caged SpyCatcher003, which allows light triggering of covalent bond formation to SpyTag003 in mammalian cells. Photocaging is achieved through site-specific incorporation of an unnatural coumarin-lysine at the reactive site of SpyCatcher003. We showed a uniform specific reaction in cell lysate upon light activation. We then used the spatiotemporal precision of a 405 nm confocal laser for uncaging in seconds, probing the earliest events in mechanotransduction by talin, the key force sensor between the cytoskeleton and the extracellular matrix. Reconstituting talin induced rapid biphasic extension of lamellipodia, revealing the kinetics of talin-regulated cell spreading and polarization. Thereafter we determined the hierarchy of the recruitment of key components for cell adhesion. Precise control over site-specific protein reaction with visible light creates diverse opportunities for cell biology and nanoassembly.

Bacterial enzymes: powerful tools for protein labeling, cell signaling, and therapeutic discovery

Bacteria have evolved a diverse set of enzymes that enable them to subvert host defense mechanisms as well as to form part of the prokaryotic immune system. Due to their unique and varied biochemical activities, these bacterial enzymes have emerged as key tools for understanding and investigating biological systems. In this review, we summarize and discuss some of the most prominent bacterial enzymes used for the site-specific modification of proteins, in vivo protein labeling, proximity labeling, interactome mapping, signaling pathway manipulation, and therapeutic discovery. Finally, we provide a perspective on the complementary advantages and limitations of using bacterial enzymes compared with chemical probes for exploring biological systems.

Spontaneous and site-specific immobilization of PNGase F via spy chemistry

Protein N-glycosylation plays a critical role in a wide range of biological processes, and aberrant N-glycosylation is frequently associated with various pathological states. For global N-glycosylation analysis, N-glycans are typically released from glycoproteins mediated by endoglycosidases, primarily peptide N-glycosidase F (PNGase F). However, conventional N-glycan release by in-solution PNGase F is time-consuming and nonreusable. Although some immobilization methods can save time and reduce the enzyme dosage, including affinity interaction and covalent binding, the immobilized PNGase F by these traditional methods may compromises the immobilized enzyme's stability and biofunction. Therefore, a new approach is urgently needed to firmly and steadily immobilize PNGase F. To meet this demand, we have developed a spontaneous and site-specific way to immobilize PNGase F onto magnetic nanoparticles via Spy chemistry. The magnetic nanoparticles were synthesized and modified with SpyTag as a solid surface. The PNGase F fused with SpyCatcher can then be site-specifically and covalently immobilized onto this solid phase, forming a firm isopeptide bond via self-catalysis between the SpyTag peptide and SpyCatcher. Importantly, the immobilization process mediated by mild spy chemistry does not result in PNGase F inactivation; and allows immobilized PNGase F to rapidly release various types of glycans (high-mannose, sialylated, and hybrid) from glycoproteins. Moreover, the immobilized PNGase F exhibited good deglycosylation activity and facilitated good reusability in consecutive reactions. Deglycosylation of clinical samples was completed by the immobilized PNGase F as fast as several minutes.

Harnessing split fluorescent proteins in modular protein logic for advanced whole-cell detection

Whole-cell biosensors have demonstrated promising capabilities in detecting target molecules. However, their limited selectivity and precision can be attributed to the broad substrate tolerance of natural proteins. In this study, we aim to enhance the performance of whole-cell biosensors by incorporating of logic AND gates. Specifically, we utilize the HrpR/S system, a widely employed hetero-regulation module from Pseudomonas syringae in synthetic biology, to construct an orthogonal AND gate in Escherichia coli. To accomplish this, we compare the HrpR/S system with self-associating split fluorescent proteins using the Spy Tag/Spy Catcher system. Our objective is to selectively activate a reporter gene in the presence of both IPTG and Hg(II) ions. Through systematic genetic engineering and evaluation of various biological parts under diverse working conditions, our research demonstrates the utility of self-associating split fluorescent proteins in developing high-performance whole-cell biosensors. This approach offers advantages such as engineering simplicity, reduced basal activity, and improved selectivity. Furthermore, the comparison with the HrpR/S system serves as a valuable control model, providing insights into the relative advantages and limitations of each approach. These findings present a systematic and adaptable strategy to overcome the substrate tolerance challenge faced by whole-cell biosensors.

Engineering Protein Nanoparticles Functionalized with an Immunodominant Coxiella burnetii Antigen to Generate a Q Fever Vaccine

Coxiella burnetii is the causative agent of Q fever, for which there is yet to be an FDA-approved vaccine. This bacterial pathogen has both extra- and intracellular stages in its life cycle, and therefore both a cell-mediated (i.e., T lymphocyte) and humoral (i.e., antibody) immune response are necessary for effective eradication of this pathogen. However, most proposed vaccines elicit strong responses to only one mechanism of adaptive immunity, and some can either cause reactogenicity or lack sufficient immunogenicity. In this work, we aim to apply a nanoparticle-based platform toward producing both antibody and T cell immune responses against C. burnetii. We investigated three approaches for conjugation of the immunodominant outer membrane protein antigen (CBU1910) to the E2 nanoparticle to obtain a consistent antigen orientation: direct genetic fusion, high affinity tris-NTA-Ni conjugation to polyhistidine-tagged CBU1910, and the SpyTag/SpyCatcher (ST/SC) system. Overall, we found that the ST/SC approach yielded nanoparticles loaded with the highest number of antigens while maintaining stability, enabling formulations that could simultaneously co-deliver the protein antigen (CBU1910) and adjuvant (CpG1826) on one nanoparticle (CBU1910-CpG-E2). Using protein microarray analyses, we found that after immunization, antigen-bound nanoparticle formulations elicited significantly higher antigen-specific IgG responses than soluble CBU1910 alone and produced more balanced IgG1/IgG2c ratios. Although T cell recall assays from these protein antigen formulations did not show significant increases in antigen-specific IFN-γ production compared to soluble CBU1910 alone, nanoparticles conjugated with a CD4 peptide epitope from CBU1910 generated elevated T cell responses in mice to both the CBU1910 peptide epitope and whole CBU1910 protein. These investigations highlight the feasibility of conjugating antigens to nanoparticles for tuning and improving both humoral- and cell-mediated adaptive immunity against C. burnetii.

Snoopligase-catalyzed molecular glue enables efficient generation of hyperoligomerized TRAIL variant with enhanced antitumor effect

Clinical application of tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) is predominantly limited by its inefficient apoptosis induction in tumor cells, which might be improved by using molecular superglue-mediated hyperoligomerization to increase its valency. Here, the minimal superglue peptide pairs, including Snoopligase-catalyzed SnoopTagJr/SnoopDogTag and SpyStapler-catalyzed SpyTag/SpyBDTag, were individually fused at the N- or C-terminus of the TRAIL promoter to produce superglue-fusion TRAIL variants. Similar to native trivalent TRAIL, these superglue-fusion TRAIL variants were highly expressed in Escherichia coli (E. coli) and spontaneously trimerized. In the presence of Snoopligase or SpyStapler, the trivalent superglue-fusion TRAIL variants were predominantly crosslinked into hexavalent TRAIL variants. Nevertheless, Snoopligase was more efficient than SpyStapler in the production of hexavalent TRAIL variants. In particular, Snoopligase-catalyzed trivalent TRAIL variants with N-terminal fusion of SnoopTagJr/SnoopDogTag produced hexavalent SnHexaTR with the highest yield (∼70%). The in vitro cytotoxicity of SnHexaTR was 10-40 times greater than that of TRAIL in several tumor cells. In addition, compared to trivalent TRAIL, hexavalent SnHexaTR showed a longer serum half-life and greater tumor uptake, which resulted in eradication of 50% of tumor xenografts of TRAIL-sensitive COLO 205. In mice bearing TRAIL-resistant HT-29 tumor xenografts, hexavalent SnHexaTR combined with bortezomib encapsulated in liposomes also showed robust tumor growth suppression, indicating that hyperoligomerization mediated by minimal molecular superglue significantly increased the cytotoxicity and antitumor effect of TRAIL. As a novel anticancer agent candidate, the hexavalent SnHexaTR has great potential for clinical application in cancer therapy.

A potent and durable malaria transmission-blocking vaccine designed from a single-component 60-copy Pfs230D1 nanoparticle

Malaria transmission-blocking vaccines (TBVs) reduce disease transmission by breaking the continuous cycle of infection between the human host and the mosquito vector. Domain 1 (D1) of Pfs230 is a leading TBV candidate and comprises the majority of transmission-reducing activity (TRA) elicited by Pfs230. Here we show that the fusion of Pfs230D1 to a 60-copy multimer of the catalytic domain of dihydrolipoyl acetyltransferase protein (E2p) results in a single-component nanoparticle composed of 60 copies of the fusion protein with high stability, homogeneity, and production yields. The nanoparticle presents a potent human transmission-blocking epitope within Pfs230D1, indicating the antigen is correctly oriented on the surface of the nanoparticle. Two vaccinations of New Zealand White rabbits with the Pfs230D1 nanoparticle elicited a potent and durable antibody response with high TRA when formulated in two distinct adjuvants suitable for translation to human use. This single-component nanoparticle vaccine may play a key role in malaria control and has the potential to improve production pipelines and the cost of manufacturing of a potent and durable TBV.

Visible light-induced specific protein reaction delineates early stages of cell adhesion

Light is well established for control of bond breakage, but not for control of specific bond formation in complex environments. We previously engineered diffusion-limited reactivity of SpyTag003 peptide with its protein partner SpyCatcher003 through spontaneous transamidation. This system enables precise and irreversible assembly of biological building blocks, with applications from biomaterials to vaccines. Here, we establish a system for rapid control of this amide bond formation with visible light. We have generated a caged SpyCatcher003, which allows light triggering of covalent bond formation to SpyTag003 in mammalian cells. Photocaging is achieved through site-specific incorporation of an unnatural coumarin-lysine at the reactive site of SpyCatcher003. We showed uniform specific reaction in cell lysate upon light activation. We then used the spatiotemporal precision of a 405 nm confocal laser for uncaging in seconds, probing the earliest events in mechanotransduction by talin, the key force sensor between the cytoskeleton and extracellular matrix. Reconstituting talin induced rapid biphasic extension of lamellipodia, revealing the kinetics of talin-regulated cell spreading and polarization. Thereafter we determined the hierarchy of recruitment of key components for cell adhesion. Precise control over site-specific protein reaction with visible light creates diverse opportunities for cell biology and nanoassembly.

Modification of bacterial microcompartments with target biomolecules via post-translational SpyTagging

Bacterial microcompartments (BMCs) are proteinaceous organelle-like structures formed within bacteria, often encapsulating enzymes and cellular processes, in particular, allowing toxic intermediates to be shielded from the general cellular environment. Outside of their biological role they are of interest, through surface modification, as potential drug carriers and polyvalent antigen display scaffolds. Here we use a post-translational modification approach, using copper free click chemistry, to attach a SpyTag to a target protein molecule for attachment to a specific SpyCatcher modified BMC shell protein. We demonstrate that a post-translationally SpyTagged material can react with a SpyCatcher modified BMC and show its presence on the surface of BMCs, enabling future investigation of these structures as polyvalent antigen display scaffolds for vaccine development. This post-translational 'click' methodology overcomes the necessity to genetically encode the SpyTag, avoids any potential reduction in expression yield and expands the scope of SpyTag/SpyCatcher vaccine scaffolds to form peptide epitope vaccines and small molecule delivery agents.

Asymmetric Assembly and Self-Adjuvanted Antigen Delivery Platform for Improved Antigen Uptake and Antitumor Effect

The development of effective tumor vaccines is an important direction in the field of cancer prevention/immunotherapy. Efficient antigen delivery is essential for inducing effective antitumor responses for tumor vaccines. Lumazine synthase (BLS) from Brucella spp. is a decameric protein with delivery and adjuvant properties, but its application in tumor vaccines is limited. Here, we developed an antigen delivery platform by combining a BLS asymmetric assembly and the Plug-and-Display system of SpyCatcher/SpyTag. An asymmetric assembly system consisting of BLSke and BLSdr was developed to equally assemble two molecules. Then, the MHC-I-restricted ovalbumin peptide (OVA(257-264) SIINFEKL) was conjugated with BLSke, and a cell-penetrating peptide (CPP) KALA was conjugated with BLSdr using the SpyCatcher/SpyTag system. KALA modification enhanced internalization of OVA peptides by DCs as well as promoted the maturation of DCs and the cross-presentation of SIINFEKL. Moreover, the immunotherapy of a KALA-modified vaccine suppressed tumor growth and enhanced CD8⁺ T cell responses in E.G7-OVA tumor-bearing mice. In the prophylactic model, KALA-modified vaccination showed the most significant protective effect and significantly prolonged the survival period of tumor challenged mice. In conclusion, the asymmetric assembly platform equally assembles two proteins or peptides, avoiding their spatial or functional interference. This asymmetric assembly and Plug-and-Display technology provide a universal platform for rapid development of personalized tumor vaccines.

Molecular superglue-mediated higher-order assembly of TRAIL variants with superior apoptosis induction and antitumor activity

Prompting higher-order death receptor (DR) clustering by increasing the valency of DR agonist is efficient to induce apoptosis of tumor cells. As an attractive DR agonist with superior biosafety, the trimeric tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) exerts limited antitumor effect in patients, which is predominantly attributed to its low DR clustering ability and short serum half-life. Previous antibody scaffolds-based engineering strategies to increase the valency and/or prolong the serum half-life of TRAIL improve apoptosis induction, however, often produce large proteins with poor tumor penetration. Covalent protein ligation mediated by small molecular superglues such as SpyTag/SpyCatcher might be a novel strategy to assemble higher-order TRAIL variants. Upon fusion to TRAIL promotor, SpyTag/SpyCatcher molecular superglue preferentially ligated two trimeric TRAIL to produce a hexameric TRAIL variant, HexaTR, exhibiting a significantly increased apoptosis induction. In addition, an albumin-binding HexaTR, ABD-HexaTR, with a prolonged serum half-life by binding to endogenous albumin was also produced using the same strategy. Compared to the trimeric TRAIL, the hexameric HexaTR and ABD-HexaTR showed 20-50 times greater in vivo antitumor effect, resulting in eradication of several types of large (150-300 mm³) tumor xenografts. Combination with bortezomib carried by liposome further improved the antitumor effects of the hexavalent HexaTR and ABD-HexaTR in refractory cancer. Our results indicate that the superglue-mediated higher-order assembly is promising to improve the DR clustering and proapoptotic signaling of TRAIL, showing great advantages in constructing the next generation of DR agonists for cancer therapy.

Microbial Synthesis of High-Molecular-Weight, Highly Repetitive Protein Polymers

High molecular weight (MW), highly repetitive protein polymers are attractive candidates to replace petroleum-derived materials as these protein-based materials (PBMs) are renewable, biodegradable, and have outstanding mechanical properties. However, their high MW and highly repetitive sequence features make them difficult to synthesize in fast-growing microbial cells in sufficient amounts for real applications. To overcome this challenge, various methods were developed to synthesize repetitive PBMs. Here, we review recent strategies in the construction of repetitive genes, expression of repetitive proteins from circular mRNAs, and synthesis of repetitive proteins by ligation and protein polymerization. We discuss the advantages and limitations of each method and highlight future directions that will lead to scalable production of highly repetitive PBMs for a wide range of applications.

ASFV proteins presented at the surface of T7 phages induce strong antibody responses in mice

African swine fever virus (ASFV) infection causes substantial economic losses to the swine industry worldwide, and there are still no safe and effective vaccines or therapeutics available. The granulated virus antigen improves the antigen present process and elicits high antibody reaction than the subunit antigen. In this study, the SpyTag peptide-p10 fusion protein was altered and displayed on the surface of the T7 phage to construct an engineered phage (T7-ST). At the same time, ASFV antigen-Spycatcher C-terminal-fused protein (antigen-SC) was expressed and purified by an E. coli prokaryotic expression system. Five virus-like particles (VLPs) displaying the main ASFV antigenic proteins P30, P54, P72, CD2v, and K145R were reconstructed by the isopeptide bond between SpyTag and antigen-SC proteins. The stability of five ASFV VLPs in high temperature and extreme pH conditions was evaluated by transmission electron microscopy (TEM) and plaque analysis. All ASFV VLPs induced a high titer antigen-specific antibody response in mice. Our results showed that the granulated antigen displaying ASFV protein on the surface of the T7 phage provides a robust potential vaccine and diagnostic tool to address the challenge of the ASFV pandemic.

Biomolecular Click Reactions Using a Minimal pH-Activated Catcher/Tag Pair for Producing Native-Sized Spider-Silk Proteins

A type of protein/peptide pair known as Catcher/Tag pair spontaneously forms an intermolecular isopeptide bond which can be applied for biomolecular click reactions. Covalent protein conjugation using Catcher/Tag pairs has turned out to be a valuable tool in biotechnology and biomedicines, but it is essential to increase the current toolbox of orthogonal Catcher/Tag pairs to expand the range of applications further, for example, for controlled multiple-fragment ligation. We report here the engineering of novel Catcher/Tag pairs for protein ligation, aided by a crystal structure of a minimal CnaB domain from Lactobacillus plantarum. We show that a newly engineered pair, called SilkCatcher/Tag enables efficient pH-inducible protein ligation in addition to being compatible with the widely used SpyCatcher/Tag pair. Finally, we demonstrate the use of the SilkCatcher/Tag pair in the production of native-sized highly repetitive spider-silk-like proteins with >90 % purity, which is not possible by traditional recombinant production methods.

Revealing the role of tunable amino acid residues in elastin-like polypeptides (ELPs)-mediated biomimetic silicification

Elastin-like polypeptides (ELPs) are attractive materials for the green preparation of silica nanoparticles via biomimetic silicification. However, the critical factors affecting the ELP-mediated silicification remain unclear. Herein, the role of tunable amino acid residues of ELPs in silicification was studied using three ELPs (ELPs[V9F-40], ELPs[KV8F-40], and ELPs[K5V4F-40]) and their fusion proteins (ELPs[V9F-40]-SpyCatcher, ELPs[KV8F-40]-SpyCatcher, and ELPs[K5V4F-40]-SpyCatcher) with different contents of lysine residues. Bioinformatics methods were employed for the first time to reveal the key physicochemical parameters correlated with silicification. The specific activity of ELPs was increased with the promotion of lysine content with a high correlation coefficient (R = 0.899). Furthermore, exogenous acidic protein SpyCatcher would hinder the interactions between the silica precursors and ELPs, leading to the significantly decrease in specific activity. The isoelectric point (pI) of ELPs presented the highest correlation to silicification with a coefficient of 0.963. The charges of the ELPs [K5V4F-40] at different pH were calculated based on the sequence or structure. Interestingly, the excellent correlation between charges based on structure and specific activity was obtained. Collectively, the novel methods developed here may pave a new way for rational design of ELPs or other peptides for efficient and green preparation of silica nanomaterials for biomedicine, biocatalysis, and biosensor.

Spy&IAC enables specific capture of SpyTagged proteins for rapid assembly of plug-and-display nanoparticle vaccines

From modular vaccine production to protein assembly on nanoparticles, the SpyCatcher/SpyTag system provides a convenient plug-and-display procedure. Here, we established a general-purpose immunoaffinity chromatography (IAC) method for SpyTagged proteins (Spy&IAC). SpyTags are displayed on the surface of nanoparticles to induce high-affinity monoclonal antibodies, allowing the specific capture of the target protein. Taking the key core antigenic regions of two coronaviruses that are currently more threatened in the field of human and animal diseases, the nucleocapsid (N) protein of SARS-CoV-2 and the COE protein of porcine epidemic diarrhea virus (PEDV) as model proteins, a purification model with SpyTag at the N-terminal or C-terminal expressed in E. coli or mammalian cells was constructed. After the efficient elution of Spy&IAC, the final yield of several proteins is about 3.5-15 mg/L culture, and the protein purity is above 90 %. Purification also preserves the assembly function and immunogenicity of the protein to support subsequent modular assembly and immunization programs. This strategy provides a general tool for the efficient purification of SpyTagged proteins from different expression sources and different tag positions, enabling the production of modular vaccines at lower cost and in a shorter time, which will prepare the public health field for potential pandemic threats.

Isopeptide Bonding In Planta Allows Functionalization of Elongated Flexuous Proteinaceous Viral Nanoparticles, including Non-Viable Constructs by Other Means

Plant viral nanoparticles (VNPs) have become an attractive platform for the development of novel nanotools in the last years because of their safety, inexpensive production, and straightforward functionalization. Turnip mosaic virus (TuMV) is one example of a plant-based VNP used as a nanobiotechnological platform either as virions or as virus-like particles (VLPs). Their functionalization mainly consists of coating their surface with the molecules of interest via chemical conjugation or genetic fusion. However, because of their limitations, these two methods sometimes result in non-viable constructs. In this paper, we applied the SpyTag/SpyCatcher technology as an alternative for the functionalization of TuMV VLPs with peptides and proteins. We chose as molecules of interest the green fluorescent protein (GFP) because of its good traceability, as well as the vasoactive intestinal peptide (VIP), given the previous unsuccessful attempts to functionalize TuMV VNPs by other methods. The successful conjugation of VLPs to GFP and VIP using SpyTag/SpyCatcher was confirmed through Western blot and electron microscopy. Moreover, the isopeptide bond between SpyTag and SpyCatcher occurred in vivo in co-agroinfiltrated Nicotiana benthamiana plants. These results demonstrated that SpyTag/SpyCatcher improves TuMV functionalization compared with previous approaches, thus implying the expansion of the application of the technology to elongated flexuous VNPs.

SpyDisplay: A versatile phage display selection system using SpyTag/SpyCatcher technology

Phage display is an established method for the in vitro selection of recombinant antibodies and other proteins or peptides from gene libraries. Here we describe SpyDisplay, a phage display method in which the display is achieved via SpyTag/SpyCatcher protein ligation instead of genetically fusing the displayed protein to a phage coat protein. In our implementation, SpyTagged antibody antigen-binding fragments (Fabs) are displayed via protein ligation on filamentous phages carrying SpyCatcher fused to the pIII coat protein. A library of genes encoding Fab antibodies was cloned in an expression vector containing an f1 replication origin, and SpyCatcher-pIII was separately expressed from a genomic locus in engineered E. coli. We demonstrate the functional, covalent display of Fab on phage, and rapidly isolate specific high-affinity clones via phage panning, confirming the robustness of this selection system. SpyTagged Fabs, the direct outcome of the panning campaign, are compatible with modular antibody assembly using prefabricated SpyCatcher modules and can be directly tested in diverse assays. Furthermore, SpyDisplay streamlines additional applications that have traditionally been challenging for phage display: we show that it can be applied to N-terminal display of the protein of interest and it enables display of cytoplasmically folding proteins exported to periplasm via the TAT pathway.

Adhesive Virulence Factors of Staphylococcus aureus Resist Digestion by Coagulation Proteases Thrombin and Plasmin

Staphylococcus aureus (S. aureus) is an invasive and life-threatening pathogen that has undergone extensive coevolution with its mammalian hosts. Its molecular adaptations include elaborate mechanisms for immune escape and hijacking of the coagulation and fibrinolytic pathways. These capabilities are enacted by virulence factors including microbial surface components recognizing adhesive matrix molecules (MSCRAMMs) and the plasminogen-activating enzyme staphylokinase (SAK). Despite the ability of S. aureus to modulate coagulation, until now the sensitivity of S. aureus virulence factors to digestion by proteases of the coagulation system was unknown. Here, we used protein engineering, biophysical assays, and mass spectrometry to study the susceptibility of S. aureus MSCRAMMs to proteolytic digestion by human thrombin, plasmin, and plasmin/SAK complexes. We found that MSCRAMMs were highly resistant to proteolysis, and that SAK binding to plasmin enhanced this resistance. We mapped thrombin, plasmin, and plasmin/SAK cleavage sites of nine MSCRAMMs and performed biophysical, bioinformatic, and stability analysis to understand structural and sequence features common to protease-susceptible sites. Overall, our study offers comprehensive digestion patterns of S. aureus MSCRAMMs by thrombin, plasmin, and plasmin/SAK complexes and paves the way for new studies into this resistance and virulence mechanism.

Stimulation of the immune system by a tumor antigen-bearing adenovirus-inspired VLP allows control of melanoma growth

Virus-like particles (VLPs) are versatile protein-based platforms that can be used as a vaccine platform mainly in infectiology. In the present work, we compared a previously designed, non-infectious, adenovirus-inspired 60-mer dodecahedric VLP to display short epitopes or a large tumor model antigen. To validate these two kinds of platforms as a potential immuno-stimulating approach, we evaluated their ability to control melanoma B16-ovalbumin (OVA) growth in mice. A set of adjuvants was screened, showing that polyinosinic-polycytidylic acid (poly(I:C)) was well suited to generate a homogeneous cellular and humoral response against the desired epitopes. In a prophylactic setting, vaccination with the VLP displaying these epitopes resulted in total inhibition of tumor growth 1 month after vaccination. A therapeutic vaccination strategy showed a delay in grafted tumor growth or its total rejection. If the "simple" epitope display on the VLP is sufficient to prevent tumor growth, then an improved engineered platform enabling display of a large antigen is a tool to overcome the barrier of immune allele restriction, broadening the immune response, and paving the way for its potential utilization in humans as an off-the-shelf vaccine.

Novel Split Intein-Mediated Enzymatic Channeling Accelerates the Multimeric Bioconversion Pathway of Ginsenoside

Cascade reaction systems, such as protein fusion and synthetic protein scaffold systems, can both spatially control the metabolic flux and boost the productivity of multistep enzymatic reactions. Despite many efforts to generate fusion proteins, this task remains challenging due to the limited expression of complex enzymes. Therefore, we developed a novel fusion system that bypasses the limited expression of complex enzymes via a post-translational linkage. Here, we report a split intein-mediated cascade system wherein orthogonal split inteins serve as adapters for protein ligation. A genetically programmable, self-assembled, and traceless split intein was utilized to generate a biocatalytic cascade to produce the ginsenoside compound K (CK) with various pharmacological activities, including anticarcinogenic, anti-inflammatory, and antidiabetic effects. We used two types of split inteins, consensus atypical (Cat) and Rma DnaB, to form a covalent scaffold with the three enzymes involved in the CK conversion pathway. The multienzymatic complex with a size greater than 240 kDa was successfully assembled in a soluble form and exhibited specific activity toward ginsenoside conversion. Furthermore, our split intein cascade system significantly increased the CK conversion rate and reduced the production time by more than 2-fold. Our multienzymatic cascade system that uses split inteins can be utilized as a platform for regulating multimeric bioconversion pathways and boosting the production of various high-value substances.

Gigavalent Display of Proteins on Monodisperse Polyacrylamide Hydrogels as a Versatile Modular Platform for Functional Assays and Protein Engineering

The assembly of robust, modular biological components into complex functional systems is central to synthetic biology. Here, we apply modular "plug and play" design principles to a solid-phase protein display system that facilitates protein purification and functional assays. Specifically, we capture proteins on polyacrylamide hydrogel display beads (PHD beads) made in microfluidic droplet generators. These monodisperse PHD beads are decorated with predefined amounts of anchors, methacrylate-PEG-benzylguanine (BG) and methacrylate-PEG-chloroalkane (CA), that react covalently with SNAP-/Halo-tag fusion proteins, respectively, in a specific, orthogonal, and stable fashion. Anchors, and thus proteins, are distributed throughout the entire bead volume, allowing attachment of ∼10⁹ protein molecules per bead (⌀ 20 μm) -a higher density than achievable with commercial surface-modified beads. We showcase a diverse array of protein modules that enable the secondary capture of proteins, either noncovalently (IgG and SUMO-tag) or covalently (SpyCatcher, SpyTag, SnpCatcher, and SnpTag), in mono- and multivalent display formats. Solid-phase protein binding and enzymatic assays are carried out, and incorporating the photocleavable protein PhoCl enables the controlled release of modules via visible-light irradiation for functional assays in solution. We utilize photocleavage for valency engineering of an anti-TRAIL-R1 scFv, enhancing its apoptosis-inducing potency ∼50-fold through pentamerization.

Expanding the chemical diversity of M13 bacteriophage

Bacteriophage M13 virions are very stable nanoparticles that can be modified by chemical and genetic methods. The capsid proteins can be functionalized in a variety of chemical reactions without loss of particle integrity. In addition, Genetic Code Expansion (GCE) permits the introduction of non-canonical amino acids (ncAAs) into displayed peptides and proteins. The incorporation of ncAAs into phage libraries has led to the discovery of high-affinity binders with low nanomolar dissociation constant (K D) values that can potentially serve as inhibitors. This article reviews how bioconjugation and the incorporation of ncAAs during translation have expanded the chemistry of peptides and proteins displayed by M13 virions for a variety of purposes.

Protein Condensate Formation via Controlled Multimerization of Intrinsically Disordered Sequences

Many proteins harboring low complexity or intrinsically disordered sequences (IDRs) are capable of undergoing liquid-liquid phase separation to form mesoscale condensates that function as biochemical niches with the ability to concentrate or sequester macromolecules and regulate cellular activity. Engineered disordered proteins have been used to generate programmable synthetic membraneless organelles in cells. Phase separation is governed by the strength of interactions among polypeptides with multivalency enhancing phase separation at lower concentrations. Previously, we and others demonstrated enzymatic control of IDR valency from multivalent precursors to dissolve condensed phases. Here, we develop noncovalent strategies to multimerize an individual IDR, the RGG domain of LAF-1, using protein interaction domains to regulate condensate formation in vitro and in living cells. First, we characterize modular dimerization of RGG domains at either terminus using cognate high-affinity coiled-coil pairs to form stable condensates in vitro. Second, we demonstrate temporal control over phase separation of RGG domains fused to FRB and FKBP in the presence of dimerizer. Further, using a photocaged dimerizer, we achieve optically induced condensation both in cell-sized emulsions and within live cells. Collectively, these modular tools allow multiple strategies to promote phase separation of a common core IDR for tunable control of condensate assembly.

Design of fusion enzymes for biocatalytic applications in aqueous and non-aqueous media

Biocatalytic cascades play a fundamental role in sustainable chemical synthesis. Fusion enzymes are one of the powerful toolboxes to enable the tailored combination of multiple enzymes for efficient cooperative cascades. Especially, this approach offers a substantial potential for the practical application of cofactor-dependent oxidoreductases by forming cofactor self-sufficient cascades. Adequate cofactor recycling while keeping the oxidized/reduced cofactor in a confined microenvironment benefits from the fusion fashion and makes the use of oxidoreductases in harsh non-aqueous media practical. In this mini-review, we have summarized the application of various fusion enzymes in aqueous and non-aqueous media with a focus on the discussion of linker design within oxidoreductases. The design and properties of the reported linkers have been reviewed in detail. Besides, the substrate loadings in these studies have been listed to showcase one of the key limitations (low solubility of hydrophobic substrates) of aqueous biocatalysis when it comes to efficiency and economic feasibility. Therefore, a straightforward strategy of applying non-aqueous media has been briefly discussed while the potential of using the fusion oxidoreductase of interest in organic media was highlighted.

Intramolecular covalent bonds in Gram-positive bacterial surface proteins

Gram-positive bacteria experience considerable mechanical perturbation when adhering to host surfaces during colonization and infection. They have evolved various adhesion proteins that are mechanically robust to ensure strong surface adhesion. Recently, it was discovered that these adhesion proteins contain rare, extra intramolecular covalent bonds that stabilize protein structures and participate in surface bonding. These intramolecular covalent bonds include isopeptides, thioesters, and ester bonds, which often form spontaneously without the need for additional enzymes. With the development of single-molecule force spectroscopy techniques, the detailed mechanical roles of these intramolecular covalent bonds have been revealed. In this review, we summarize the recent advances in this area of research, focusing on the link between the mechanical stability and function of these covalent bonds in Gram-positive bacterial surface proteins. We also highlight the potential impact of these discoveries on the development of novel antibiotics and chemical biology tools.

Design and biocatalytic applications of genetically fused multifunctional enzymes

Fusion proteins, understood as those created by joining two or more genes that originally encoded independent proteins, have numerous applications in biotechnology, from analytical methods to metabolic engineering. The use of fusion enzymes in biocatalysis may be even more interesting due to the physical connection of enzymes catalyzing successive reactions into covalently linked complexes. The proximity of the active sites of two enzymes in multi-enzyme complexes can make a significant contribution to the catalytic efficiency of the reaction. However, the physical proximity of the active sites does not guarantee this result. Other aspects, such as the nature and length of the linker used for the fusion or the order in which the enzymes are fused, must be considered and optimized to achieve the expected increase in catalytic efficiency. In this review, we will relate the new advances in the design, creation, and use of fused enzymes with those achieved in biocatalysis over the past 20 years. Thus, we will discuss some examples of genetically fused enzymes and their application in carbon‑carbon bond formation and oxidative reactions, generation of chiral amines, synthesis of carbohydrates, biodegradation of plant biomass and plastics, and in the preparation of other high-value products.

SpySwitch enables pH- or heat-responsive capture and release for plug-and-display nanoassembly

Proteins can be empowered via SpyTag for anchoring and nanoassembly, through covalent bonding to SpyCatcher partners. Here we generate a switchable version of SpyCatcher, allowing gentle purification of SpyTagged proteins. We introduce numerous histidines adjacent to SpyTag’s binding site, giving moderate pH-dependent release. After phage-based selection, our final SpySwitch allows purification of SpyTag- and SpyTag003-fusions from bacterial or mammalian culture by capture at neutral pH and release at pH 5, with purity far beyond His-tag methods. SpySwitch is also thermosensitive, capturing at 4 °C and releasing at 37 °C. With flexible choice of eluent, SpySwitch-purified proteins can directly assemble onto multimeric scaffolds. 60-mer multimerization enhances immunogenicity and we use SpySwitch to purify receptor-binding domains from SARS-CoV-2 and 11 other sarbecoviruses. For these receptor-binding domains we determine thermal resilience (for mosaic vaccine development) and cross-recognition by antibodies. Antibody EY6A reacts across all tested sarbecoviruses, towards potential application against new coronavirus pandemic threats.

The SpyCatcher-SpyTag system allows protein anchoring and nanoassembly. Here, the authors engineer SpySwitch, a dually switchable Catcher which allows gentle purification of SpyTagged proteins prior to downstream applications such as the assembly of virus-like particles.

Molecular Properties of β-Carotene Oxygenases and Their Potential in Industrial Production of Vitamin A and Its Derivatives

β-Carotene 15,15′-oxygenase (BCO1) and β-carotene 9′,10′-oxygenase (BCO2) are potential producers of vitamin A derivatives, since they can catalyze the oxidative cleavage of dietary provitamin A carotenoids to retinoids and derivative such as apocarotenal. Retinoids are a class of chemical compounds that are vitamers of vitamin A or are chemically related to it, and are essential nutrients for humans and highly valuable in the food and cosmetics industries. β-carotene oxygenases (BCOs) from various organisms have been overexpressed in heterogeneous bacteria, such as Escherichia coli, and their biochemical properties have been studied. For the industrial production of retinal, there is a need for increased production of a retinal producer and biosynthesis of retinal using biocatalyst systems improved by enzyme engineering. The current review aims to discuss BCOs from animal, plants, and bacteria, and to elaborate on the recent progress in our understanding of their functions, biochemical properties, substrate specificity, and enzyme activities with respect to the production of retinoids in whole-cell conditions. Moreover, we specifically propose ways to integrate BCOs into retinal biosynthetic bacterial systems to improve the performance of retinal production.

Severe Acute Respiratory Syndrome Coronavirus 2 Variants—Possibility of Universal Vaccine Design: A Review

Both novel and conventional vaccination strategies have been implemented worldwide since the onset of coronavirus disease 2019 (COVID-19) pandemic caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Despite various medical advances in the treatment and prevention of the spread of this contagious disease, it remains a major public health threat with a high mortality rate. As several lethal SARS-CoV-2 variants continue to emerge, the development of several vaccines and medicines, each with certain advantages and disadvantages, is underway. Additionally, many modalities are at various stages of research and development or clinical trials. Here, we summarize emerging SARS-CoV-2 variants, including delta, omicron, and “stealth omicron,” as well as available oral drugs for COVID-19. We also discuss possible antigen candidates other than the receptor-binding domain protein for the development of a universal COVID-19 vaccine. The present review will serve as a helpful resource for future vaccine and drug development to combat COVID-19.

Circularized fluorescent nanodiscs for probing protein-lipid interactions

Protein–lipid interactions are vital for numerous transmembrane signaling pathways. However, simple tools to characterize these interactions remain scarce and are much needed to advance our understanding of signal transduction across lipid bilayers. To tackle this challenge, we herein engineer nanodisc as a robust fluorescent sensor for reporting membrane biochemical reactions. We circularize nanodiscs via split GFP and thereby create an intensity-based fluorescent sensor (isenND) for detecting membrane binding and remodeling events. We show that isenND responds robustly and specifically to the action of a diverse array of membrane-interacting proteins and peptides, ranging from synaptotagmin and synuclein involved in neurotransmission to viral fusion peptides of HIV-1 and SARS-CoV-2. Together, isenND can serve as a versatile biochemical reagent useful for basic and translational research of membrane biology.

A fluorescent probe for detecting membrane protein binding and remodeling events is presented, which relies on split-GFP technology to generate circularized nanodiscs useful in membrane protein biophysics and structural biology.

Aptamers as promising nanotheranostic tools in the COVID-19 pandemic era

The emergence of SARS‐COV‐2, the causative agent of new coronavirus disease (COVID‐19) has become a pandemic threat. Early and precise detection of the virus is vital for effective diagnosis and treatment. Various testing kits and assays, including nucleic acid detection methods, antigen tests, serological tests, and enzyme‐linked immunosorbent assay (ELISA), have been implemented or are being explored to detect the virus and/or characterize cellular and antibody responses to the infection. However, these approaches have inherent drawbacks such as nonspecificity, high cost, are characterized by long turnaround times for test results, and can be labor‐intensive. Also, the circulating SARS‐COV‐2 variant of concerns, reduced antibody sensitivity and/or neutralization, and possible antibody‐dependent enhancement (ADE) have warranted the search for alternative potent therapeutics. Aptamers, which are single‐stranded oligonucleotides, generated artificially by SELEX (Evolution of Ligands by Exponential Enrichment) may offer the capacity to generate high‐affinity neutralizers and/or bioprobes for monitoring relevant SARS‐COV‐2 and COVID‐19 biomarkers. This article reviews and discusses the prospects of implementing aptamers for rapid point‐of‐care detection and treatment of SARS‐COV‐2. We highlight other SARS‐COV‐2 targets (N protein, spike protein stem‐helix), SELEX augmented with competition assays and in silico technologies for rapid discovery and isolation of theranostic aptamers against COVID‐19 and future pandemics. It further provides an overview on site‐specific bioconjugation approaches, customizable molecular scaffolding strategies, and nanotechnology platforms to engineer these aptamers into ultrapotent blockers, multivalent therapeutics, and vaccines to boost both humoral and cellular immunity against the virus.

This article is categorized under:

Therapeutic Approaches and Drug Discovery > Emerging Technologies

Diagnostic Tools > Biosensing

Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease

Therapeutic Approaches and Drug Discovery > Nanomedicine for Respiratory Disease

Controllably crosslinked dual enzymes enabled by genetic-encoded non-standard amino acid for efficiently enantioselective hydrogenation

In traditional method for preparing crosslinked enzymes aggregates using glutaraldehyde, random linkage is inevitable, which often destroys the enzyme active sites and severely decreases the activity. To address this issue, using genetic encode expanding, nonstandard amino acids (NSAAs) were inserted into enzyme proteins at the preselected sites for crosslinking. When aldehyde ketone reductase (AKR), alcohol dehydrogenase (ADH) and glucose dehydrogenase (GDH) were utilized as model enzymes, their mutants containing p-azido-L-phenylalanine were bio-orthogonally crosslinked with diyne to form crosslinked dual enzymes (CLDEs) acting as a cascade biological oxidation and reduction system. Then, the resultant self-purified CLDEs were characterized using matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS), scanning electron microscopy (SEM), and confocal laser scanning microscopy (CLSM), etc. In the asymmetric synthesis of (S)-1-(2,6-dichloro-3-fluorophenyl) ethanol using CLDEs, high product yield (76.08%), ee value (99.99%) and reuse stability were achieved. The yield and ee value were 12.05 times and 1.39 times higher than those using traditional crosslinked enzyme aggregates, respectively. Thus, controllable insertion NSAAs in number and location can engender reasonable linkage and metal-free self-purification for target enzyme proteins. This facile and sustainable method could be further expanded to other dual and multienzyme systems for cascade biocatalysis.

Vitamin B12 photoreceptors

Photoreceptor proteins enable living organisms to sense light and transduce this signal into biochemical outputs to elicit appropriate cellular responses. Their light sensing is typically mediated by covalently or noncovalently bound molecules called chromophores, which absorb light of specific wavelengths and modulate protein structure and biological activity. Known photoreceptors have been classified into about ten families based on the chromophore and its associated photosensory domain in the protein. One widespread photoreceptor family uses coenzyme B₁₂ or 5'-deoxyadenosylcobalamin, a biological form of vitamin B₁₂, to sense ultraviolet, blue, or green light, and its discovery revealed both a new type of photoreceptor and a novel functional facet of this vitamin, best known as an enzyme cofactor. Large strides have been made in our understanding of how these B₁₂-based photoreceptors function, high-resolution structural descriptions of their functional states are available, as are details of their unusual photochemistry. Additionally, they have inspired notable applications in optogenetics/optobiochemistry and synthetic biology. Here, we provide an overview of what is currently known about these B₁₂-based photoreceptors, their discovery, distribution, molecular mechanism of action, and the structural and photochemical basis of how they orchestrate signal transduction and gene regulation, and how they have been used to engineer optogenetic control of protein activities in living cells.