Stimuli-responsive engineered living materials

A responsive living material prepared by diffusion reveals extracellular enzyme activity of cyanobacteria

Stimuli-responsive engineered living materials (ELMs) can respond to environmental or biochemical cues and have broad utility in biological sensors and machines, but have traditionally been limited to biocompatible scaffolds. This is because they are typically made by mixing cells into a precursor solution before crosslinking. Here, we demonstrate a diffusion mechanism for incorporating cells of the cyanobacterium Synechococcus elongatus sp. PCC 7942 (S. elongatus) into nanoclay-poly-N-isopropylacrylamide (NC-PNIPAm), a hydrogel with a cytotoxic precursor, by exploiting its temperature-dependent shape-morphing behavior. Subsequent growth of S. elongatus caused a decrease in the bending curvature and stiffness (local Young's modulus) of NC-PNIPAm due to partial degradation by an unannotated enzyme. Creation and observation of this cyanobacteria-hydrogel ELM showcases a method for diffusing cells into a hydrogel as well as characterizing an extracellular enzyme.

Bacterial Species in Engineered Living Materials: Strategies and Future Directions

In recent years, there has been a notable increase interest in engineered living materials (ELMs) owing to their considerable potential. One key area of research within this field is the utilisation of various species of bacteria to create innovative living materials. In order to accelerate the advancement of bacterial-based living materials, a systematic summary of bacterial species and their design strategies is essential. Yet, up to this point, no applicable reviews have been documented. This review offers a concise introduction to living materials derived from bacteria, delves into the strategies and applications of each bacterial species in this realm, and provides perspectives and future outlooks in this field.

Yeast-Driven and Bioimpedance-Sensitive Biohybrid Soft Robots

Biohybrid robots integrate biological components with synthetic materials to harness the unique capabilities of living systems for robotic functions. This study focuses on leveraging yeast fermentation dynamics to enable actuation and sensing in soft robotic systems. By leveraging yeast's natural ability to produce carbon dioxide and generate pressure during fermentation, we demonstrate the feasibility of creating biohybrid robots with lifelike behavior and adaptability. Our research integrates bioimpedance sensing into track yeast behavior and metabolic dynamics in real time. We developed an adjustable single-resistor oscillator circuit by using a digital potentiometer to measure impedance frequency and model the yeast growth rate. Experimental results reveal the sensitivity of the single-resistor oscillator circuit to variations in yeast concentration and demonstrate the correlation between yeast behavior and actuation power. Furthermore, we highlight the potential of yeast-driven robots for various applications by demonstrating a yeast-driven soft limb capable of rotating 140° tested at different temperatures, an inflatable membrane actuator functioning as a tactile sensor detecting forces up to 4.5 N, a palpation probe for differentiating tissue stiffness, and a gripper capable of manipulating objects. This work lays the foundation for advancing biohybrid robotics by integrating yeast fermentation dynamics with bioimpedance sensing, enhancing the functionality of robotic systems.

A screening setup to streamline in vitro engineered living material cultures with the host

Engineered living materials (ELMs), which usually comprise bacteria, fungi, or animal cells entrapped in polymeric matrices, offer limitless possibilities in fields like drug delivery or biosensing. Determining the conditions that sustain ELM performance while ensuring compatibility with ELM hosts is essential before testing them in vivo. This is critical to reduce animal experimentation and can be achieved through in vitro investigations. Currently, there are no standards that ensure ELM compatibility with host tissues. Towards this goal, we designed a 96-well plate-based screening method to streamline ELM growth across culture conditions and determine their compatibility potential in vitro. We showed proliferation of three bacterial species encapsulated in hydrogels over time and screened six different cell culture media. We fabricated ELMs in bilayer and monolayer formats and tracked bacterial leakage as a measure of ELM biocontainment. After screening, an appropriate medium was selected that sustained growth of an ELM, and it was used to study cytocompatibility in vitro. ELM cytotoxicity on murine fibroblasts and human monocytes was studied by adding ELM supernatants and measuring cell membrane integrity and live/dead staining, respectively, proving ELM cytocompatibility. Our work illustrates a simple setup to streamline the screening of compatible environmental conditions of ELMs with the host.

Droplet-based bioprinting for the tailored fabrication of bacteria-laden living materials

Droplet-based bioprinting (DBB) allows for high precision, noncontact, and on-demand distribution of bioinks, hence it has been widely utilized in the preparation of bacteria-laden living materials (BLMs). Nonetheless, discontinuous ink deposition makes it challenging to fabricate large-sized intact living structures via this technique. Herein, we explore the way of using DBB to construct centimeter-scale BLMs with bespoke geometries, and further demonstrate its potential applicability in sensing-responsive device by integrating engineered bacteria. We first established a DBB method based on printing-path design, which does not require hardware modification. This strategy was able to produce customized 3D-hydrogel structures with high shape fidelity. Then, we confirmed the excellent biocompatibility of the above biofabrication approach. The Escherichia coli survived 93% ± 4.0% in printed BLMs, with uniform distribution throughout the structure. As a proof-of-concept, we finally manufactured a test strip-like heavy metal biosensor capable of plug-and-play detecting mercury (II) in water using the aforesaid approach. To our knowledge, this is the first study to employ 3D bioprinted BLMs for the detection of prevalent heavy metal pollutants. Our research shed light on the versatility of DBB in BLMs construction, which is not restricted to two-dimensional patterns. Moreover, our results are expected to innovate heavy metal biodetection and improve detection efficiency and sensitivity.

Pseudohelicene chemosensor displaying ternary signaling stimulated by hydrostatic pressure and solvent

Herein, we report the serendipitous discovery of a racemic chemosensor ([2]HA2) that outputs three signal patterns (1/0/-1) in response to two external stimuli (hydrostatic pressure and solvent); these signals can be observed by hydrostatic pressure spectroscopy.

Concept and Evolution in 3D Printing for Excellence in Healthcare

Three-dimensional printing (3DP) has gained popularity among scientists and researchers in every field due to its potential to drastically reduce energy costs for the production of customized products by utilizing less energy-intensive machines as well as minimizing material waste. The 3D printing technology is an additive manufacturing approach that uses material layer-by-layer fabrication to produce the digitally specified 3D model. The use of 3D printing technology in the pharmaceutical sector has the potential to revolutionize research and development by providing a quick and easy means to manufacture personalized one-off batches, each with unique dosages, distinct substances, shapes, and sizes, as well as variable release rates. This overview addresses the concept of 3D printing, its evolution, and its operation, as well as the most popular types of 3D printing processes utilized in the health care industry. It also discusses the application of these cutting-edge technologies to the pharmaceutical industry, advancements in various medical fields and medical equipment, 3D bioprinting, the most recent initiatives to combat COVID-19, regulatory frameworks, and the major challenges that this technology currently faces. In addition, we attempt to provide some futuristic approaches to 3DP applications.

Recent Advances in 4D Printing: A Review of Current Smart Materials, Technologies, and Drug Delivery Systems

Research on shape memory materials (SMM) or smart materials, along with advancements in printing technology, has transformed three-dimensional (3D) printing into what we now refer to as 4D printing. In this context, the addition of time as a fourth dimension enhances 3D printing. 4D printing involves the creation of 3D-printed objects that can change their shapes into complex geometries when influenced by external stimuli such as temperature, light, or pH over time. Currently, the use of smart materials in 4D printing is being explored extensively across various fields, including automotive, wearable electronics, soft robotics, food, mechatronics, textiles, biomedicine, and pharmaceuticals. A particular focus is on designing and fabricating smart drug delivery systems (DDS). This review discusses the evolution of 3D printing into 4D printing, highlighting the differences between the two. It covers the history and fundamentals of 4D printing, the integration of machine learning in 4D printing, and the types of materials used, such as stimuli-responsive materials (SRMs), hydrogels, liquid crystal elastomers, and active composites. Moreover, it presents various 4D printing techniques. Additionally, the review highlights several smart DDS that have been fabricated using 4D printing techniques. These include tablets, capsules, grippers, scaffolds, robots, hydrogels, microneedles, stents, bandages, dressings, and other devices aimed at esophageal retention, gastro-retention, and intravesical DDS. Lastly, it elucidates the current limitations and future directions of 4D printing.

Engineering Stimuli-Responsive Materials for Precision Medicine

Over the past decade, precision medicine has garnered increasing attention, making significant strides in discovering new therapeutic drugs and mechanisms, resulting in notable achievements in symptom alleviation, pain reduction, and extended survival rates. However, the limited target specificity of primary drugs and inter-individual differences have often necessitated high-dosage strategies, leading to challenges such as restricted deep tissue penetration rates and systemic side effects. Material science advancements present a promising avenue for these issues. By leveraging the distinct internal features of diseased regions and the application of specific external stimuli, responsive materials can be tailored to achieve targeted delivery, controllable release, and specific biochemical reactions. This review aims to highlight the latest advancements in stimuli-responsive materials and their potential in precision medicine. Initially, we introduce disease-related internal stimuli and capable external stimuli, elucidating the reaction principles of responsive functional groups. Subsequently, we provide a detailed analysis of representative pre-clinical achievements of stimuli responsive materials across various clinical applications, including enhancements in the treatment of cancers, injury diseases, inflammatory diseases, infection diseases, and high-throughput microfluidic biosensors. Finally, we discuss some clinical challenges, such as off-target effects, long-term impacts of nano-materials, potential ethical concerns, and offer insights into future perspectives of stimuli-responsive materials.

Dynamic Control of Chiral Recognition in Water-Soluble Naphthotubes Induced by Hydrostatic Pressure

The dynamic control of chiral (enantiomeric) responses in chiral host-guest complexes through external stimuli is a significant challenge in modern chemistry for developing smart stimuli-responsive materials. Herein, we report the (chir)optical properties and chiral recognition behavior of water-soluble chiral naphthotubes (1) under the influence of hydrostatic pressure as an external stimulus. The hydrostatic pressure spectral profiles compared to those obtained at normal pressure revealed the dynamic behavior of 1 under hydrostatic pressure, owing to the flexible linker. In chiral recognition experiments, hydrophilic amino acids such as phenylalanine (Phe) and tryptophan (Trp) exhibited reaction volume changes (ΔV°) of -0.9 cm3 mol-1 for d-Phe, -1.2 cm3 mol-1 for l-Phe, -5.6 cm3 mol-1 for d-Trp, and -7.0 cm3 mol-1 for l-Trp, with enantioselectivity ranging from 1.2 to 1.6. In contrast, hydrophobic chiral styrene oxide (2) showed ΔV° values of 1.5 cm3 mol-1 for R-2 and 3.5 cm3 mol-1 for S- 2, with a relatively higher enantioselectivity of up to 7.6. These contrasting effects of hydrostatic pressure primarily originate from the dynamics of chiral naphthotubes.

Biomineralization of Electrospun Bacteria-Encapsulated Fibers: A Relevant Step toward Living Ceramic Fibers

Living ceramic materials are proposed as high-performance engineered living materials due to their expected properties, including improved mechanical stability and performance, which could impact a wide range of applications across various fields. Particularly, living ceramic fibers are anticipated to exhibit even superior mechanical and structural properties, considering their fibril nature. This work presents the foundation for developing the family of living ceramic fibers. Ureolytic bacteria, Sporosarcina pasteurii, are encapsulated within electrospun alginate fibers, which are further subjected to biomineralization. A live-dead assay reveals that the encapsulated bacteria survive the electrospinning process. Successful biomineralization of the fibers results in the precipitation of near-spherical calcium carbonate nanoparticles at the fiber sites. The cell density within the fibers exhibits a significant impact on the packing of calcium carbonate nanoparticles. While further extensive research is required to fully realize the potential of living ceramic fibers, the findings of this study represent a significant step toward their development.

Transcriptional regulation of living materials via extracellular electron transfer

Engineered living materials combine the advantages of biological and synthetic systems by leveraging genetic and metabolic programming to control material-wide properties. Here, we demonstrate that extracellular electron transfer (EET), a microbial respiration process, can serve as a tunable bridge between live cell metabolism and synthetic material properties. In this system, EET flux from Shewanella oneidensis to a copper catalyst controls hydrogel cross-linking via two distinct chemistries to form living synthetic polymer networks. We first demonstrate that synthetic biology-inspired design rules derived from fluorescence parameterization can be applied toward EET-based regulation of polymer network mechanics. We then program transcriptional Boolean logic gates to govern EET gene expression, which enables design of computational polymer networks that mechanically respond to combinations of molecular inputs. Finally, we control fibroblast morphology using EET as a bridge for programmed material properties. Our results demonstrate how rational genetic circuit design can emulate physiological behavior in engineered living materials.

Ratiometric Chemosensors That Are Capable of Quantifying Hydrostatic Pressure Stimulus: A Case of Porphyrin Tweezers

Investigating chemosensors that are capable of quantifying pressure in solution, particularly hydrostatic pressure, which is one of the mechanical forces, is an attractive challenge in chemistry from the viewpoint of "mechano"-science. Herein, we report the investigation of chiral porphyrin tweezers, Por-Cy and Por-DPhEt, comprising different flexible linkers; Por-Cy and Por-DPhEt displayed distinct ratiometric signaling by using the higher excited S2 state with a standard excited S1 level. A novel operative mechanism using the S1/S2 fluorescence ratio was revealed using hydrostatic pressure-ultraviolet/visible (UV/vis), fluorescence/excitation, circular dichroism spectroscopy, and lifetime measurements, which can be further controlled by the open-closed conformational change inherent in the tweezer skeleton. Furthermore, the fluorescent chiral tweezers exhibited a promising |g lum| of 2.9 × 10-3, indicating that they are potential candidates for sensory applications in chiral environments. This study provides opportunities for the development of smart pressure-responsive chemosensors.

Controlling A x Mn[Fe(CN)6] charge transfer pathways through tilt-engineering for enhanced metal-to-metal interactions

The induction of structural distortion in a controlled manner through tilt engineering has emerged as a potent method to finely tune the physical characteristics of Prussian blue analogues. Notably, this distortion can be chemically induced by filling their pores with cations that can interact with the cyanide ligands. With this objective in mind, we optimized the synthetic protocol to produce the stimuli-responsive Prussian blue analogue A x Mn[Fe(CN)6] with A = K+, Rb+, and Cs+, to tune its stimuli-responsive behavior by exchanging the cation inside pores. Our crystallographic analyses reveal that the smaller the cation, the more pronounced the structural distortion, with a notable 20-degree Fe-CN tilting when filling the cavities with K+, 10 degrees with Rb+, and 2 degrees with Cs+. Moreover, this controlled distortion offers a means to switch on/off its stimuli-responsive behavior, while modifying its magnetic response. Thereby empowering the manipulation of the PBA's physical properties through cationic exchange.

Toward Practical Applications of Engineered Living Materials with Advanced Fabrication Techniques

Engineered Living Materials (ELMs) are materials composed of or incorporating living cells as essential functional units. These materials can be created using bottom-up approaches, where engineered cells spontaneously form well-defined aggregates. Alternatively, top-down methods employ advanced materials science techniques to integrate cells with various kinds of materials, creating hybrids where cells and materials are intricately combined. ELMs blend synthetic biology with materials science, allowing for dynamic responses to environmental stimuli such as stress, pH, humidity, temperature, and light. These materials exhibit unique "living" properties, including self-healing, self-replication, and environmental adaptability, making them highly suitable for a wide range of applications in medicine, environmental conservation, and manufacturing. Their inherent biocompatibility and ability to undergo genetic modifications allow for customized functionalities and prolonged sustainability. This review highlights the transformative impact of ELMs over recent decades, particularly in healthcare and environmental protection. We discuss current preparation methods, including the use of endogenous and exogenous scaffolds, living assembly, 3D bioprinting, and electrospinning. Emphasis is placed on ongoing research and technological advancements necessary to enhance the safety, functionality, and practical applicability of ELMs in real-world contexts.

Multidimensional Dynamic Control of Supramolecular Phthalocyanine Gear: A Self-Assembly System Responding to Solvent, Temperature, and Hydrostatic Pressure

Smart supramolecular materials that respond toward various external stimuli hold great promise for various applications in molecular memories, logic gates, and drug delivery systems. In this study, the active control over the self-assembly of phathalocyanine gear was achieved by combining temperature and hydrostatic pressure stimuli with a dynamic solvent. Eventually, we found that the supramolecular gear can behave as a logic gate; "engaged" (+1) or "not" (0) state is switchable by solvent, temperature, and hydrostatic pressure. This paper describes not only new aspects for the rational design of smart stimuli-responsive supramolecular materials but also the significance of multidimensional dynamic control.

Reconfigurable Growth of Engineered Living Materials

The growth of multicellular organisms is a process akin to additive manufacturing where cellular proliferation and mechanical boundary conditions, among other factors, drive morphogenesis. Engineers have limited ability to engineer morphogenesis to manufacture goods or to reconfigure materials comprised of biomass. Herein, a method that uses biological processes to grow and regrow magnetic engineered living materials (mELMs) into desired geometries is reported. These composites contain Saccharomyces cerevisiae and magnetic particles within a hydrogel matrix. The reconfigurable manufacturing process relies on the growth of living cells, magnetic forces, and elastic recovery of the hydrogel. The mELM then adopts a form in an external magnetic field. Yeast within the material proliferates, resulting in 259 ± 14% volume expansion. Yeast proliferation fixes the magnetic deformation, even when the magnetic field is removed. The shape fixity can be up to 99.3 ± 0.3%. The grown mELM can recover up to 73.9 ± 1.9% of the original form by removing yeast cell walls. The directed growth and recovery process can be repeated at least five times. This work enables ELMs to be processed and reprocessed into user-defined geometries without external material deposition.

Engineering dynamic covalent bond-based nanosystems for delivery of antimicrobials against bacterial infections

Nanodrug delivery systems (NDDS) continue to be explored as novel strategies enhance therapy outcomes and combat microbial resistance. The need for the formulation of smart drug delivery systems for targeting infection sites calls for the engineering of responsive chemical designs such as dynamic covalent bonds (DCBs). Stimuli response due to DCBs incorporated into nanosystems are emerging as an alternative way to target infection sites, thus enhancing the delivery of antibacterial agents. This leads to the eradication of bacterial infections and the reduction of antimicrobial resistance. Incorporating DCBs on the backbone of the nanoparticles endows the systems with several properties, including self-healing, controlled disassembly, and stimuli responsiveness, which are beneficial in the delivery and release of the antimicrobial at the infection site. This review provides a comprehensive and current overview of conventional DCBs-based nanosystems, stimuli-responsive DCBs-based nanosystems, and targeted DCBs-based nanosystems that have been reported in the literature for antibacterial delivery. The review emphasizes the DCBs used in their design, the nanomaterials constructed, the drug release-triggering stimuli, and the antibacterial efficacy of the reported DCBs-based nanosystems. Additionally, the review underlines future strategies that can be used to improve the potential of DCBs-based nanosystems to treat bacterial infections and overcome antibacterial resistance.

Template-Directed In Crystallo Photopolymerization of a Donor-Acceptor Cyclopropane: When Everything Falls into Place!

A single-crystal-to-single-crystal solid-state reaction of vinylogous donor-acceptor cyclopropanes is documented. The enantiospecific synthesis of new products, distinct from those obtained in solution, is achieved for the target compounds. Photopolymerization occurred upon X-ray exposure to the crystals. Notably, in one case, this reactivity exhibits selectivity since an ordered arrangement of polymers and unreacted cocrystallized monomeric conformers has been observed. Structural characterization of the complete transformation monitored through single-crystal X-ray diffraction and supported by molecular dynamics simulations sheds light on the subtle role of crystal packing in the reaction process. Moreover, the X-ray diffraction (XRD)-resolved structure of a donor-acceptor cyclopropane intermediate reveals an elongation in bond length that corroborates the existence of the so-called "push-pull effect".

Engineered Living Structures with Shape-Morphing Capability Enabled by 4D Printing with Functional Bacteria

Engineered living structures with the incorporation of functional bacteria have been explored extensively in recent years and have shown promising potential applications in biosensing, environmental remediation, and biomedicine. However, it is still rare and challenging to achieve multifunctional capabilities such as material production, shape transformation, and sensing in a single-engineered living structure. In this study, we demonstrate bifunctional living structures by synergistically integrating cellulose-generating bacteria with pH-responsive hydrogels, and the entire structures can be precisely fabricated by three-dimensional (3D) printing. Such 3D-printed bifunctional living structures produce cellulose nanofibers in ambient conditions and have reversible and controlled shape-morphing properties (usually referred to as four-dimensional printing). Those functionalities make them biomimetic versions of silkworms in the sense that both can generate nanofibers and have body motion. We systematically investigate the processing-structure-property relationship of the bifunctional living structures. The on-demand separation of 3D cellulose structures from the hydrogel template and the living nature of the bacteria after processing and shape transformation are also demonstrated.

Engineered Living Material Bioreactors with Tunable Mechanical Properties using Vat Photopolymerization

3D-printed engineered living materials (ELM) are promising bioproduction platforms for agriculture, biotechnology, sustainable energy, and green technology applications. However, the design of these platforms faces several challenges, such as the processability of these materials into complex form factors and control over their mechanical properties. Herein, ELM are presented as 3D-printed bioreactors with arbitrary shape geometries and tunable mechanical properties (moduli and toughness). Poly(ethylene glycol) diacrylate (PEGDA) is used as the precursor to create polymer networks that encapsulate the microorganisms during the vat photopolymerization process. A major limitation of PEGDA networks is their propensity to swell and fracture when submerged in water. The authors overcame this issue by adding glycerol to the resin formulation to 3D print mechanically tough ELM hydrogels. While polymer concentration affects the modulus and reduces bioproduction, ELM bioreactors still maintain their metabolic activity regardless of polymer concentration. These ELM bioreactors have the potential to be used in different applications for sustainable architecture, food production, and biomedical devices that require different mechanical properties from soft to stiff.

4D printing for biomedical applications

While three-dimensional (3D) printing excels at fabricating static constructs, it fails to emulate the dynamic behavior of native tissues or the temporal programmability desired for medical devices. Four-dimensional (4D) printing is an advanced additive manufacturing technology capable of fabricating constructs that can undergo pre-programmed changes in shape, property, or functionality when exposed to specific stimuli. In this Perspective, we summarize the advances in materials chemistry, 3D printing strategies, and post-printing methodologies that collectively facilitate the realization of temporal dynamics within 4D-printed soft materials (hydrogels, shape-memory polymers, liquid crystalline elastomers), ceramics, and metals. We also discuss and present insights about the diverse biomedical applications of 4D printing, including tissue engineering and regenerative medicine, drug delivery, in vitro models, and medical devices. Finally, we discuss the current challenges and emphasize the importance of an application-driven design approach to enable the clinical translation and widespread adoption of 4D printing.

Engineered living materials for the conversion of a low-cost food-grade precursor to a high-value flavonoid

Microbial biofactories allow the upscaled production of high-value compounds in biotechnological processes. This is particularly advantageous for compounds like flavonoids that promote better health through their antioxidant, anti-bacterial, anti-cancer and other beneficial effects but are produced in small quantities in their natural plant-based hosts. Bacteria like E. coli have been genetically modified with enzyme cascades to produce flavonoids like naringenin and pinocembrin from coumaric or cinnamic acid. Despite advancements in yield optimization, the production of these compounds still involves high costs associated with their biosynthesis, purification, storage and transport. An alternative production strategy could involve the direct delivery of the microbial biofactories to the body. In such a strategy, ensuring biocontainment of the engineered microbes in the body and controlling production rates are major challenges. In this study, these two aspects are addressed by developing engineered living materials (ELMs) consisting of probiotic microbial biofactories encapsulated in biocompatible hydrogels. Engineered probiotic E. coli Nissle 1917 able to efficiently convert cinnamic acid into pinocembrin were encapsulated in poly(vinyl alcohol)-based hydrogels. The biofactories are contained in the hydrogels for a month and remain metabolically active during this time. Control over production levels is achieved by the containment inside the material, which regulates bacteria growth, and by the amount of cinnamic acid in the medium.

Pressure-Responsive Polymer Chemosensors for Hydrostatic-Pressure-Signal Detection: Poly-l-Lysine-Pyrene Conjugates

Stimulus-responsive polymer materials are an attractive alternative to conventional supramolecular and polymer assemblies for applications in sensing, imaging, and drug-delivery systems. Herein, we synthesized a series of pyrene-labeled α- and ε-poly-l-lysine conjugates with varying degrees of substitution (DSs). Hydrostatic-pressure-UV/vis, fluorescence, and excitation spectroscopies and fluorescence lifetime measurements revealed ground-state conformers and excited-state ensembles emitting fluorescence with variable intensities. The polylysine-based chemosensors demonstrated diverse ratiometric responses to hydrostatic pressure through adjustments in polar solvents, DSs, and polymer backbones. Additionally, the fluorescence chemosensor exhibited a promising glum value of 3.2 × 10-3, indicating potential applications in chiral fluorescent materials. This study offers valuable insights into the development of smart hydrostatic-pressure-responsive polymer materials.

Phenotypically complex living materials containing engineered cyanobacteria

The field of engineered living materials lies at the intersection of materials science and synthetic biology with the aim of developing materials that can sense and respond to the environment. In this study, we use 3D printing to fabricate a cyanobacterial biocomposite material capable of producing multiple functional outputs in response to an external chemical stimulus and demonstrate the advantages of utilizing additive manufacturing techniques in controlling the shape of the fabricated photosynthetic material. As an initial proof-of-concept, a synthetic riboswitch is used to regulate the expression of a yellow fluorescent protein reporter in Synechococcus elongatus PCC 7942 within a hydrogel matrix. Subsequently, a strain of S. elongatus is engineered to produce an oxidative laccase enzyme; when printed within a hydrogel matrix the responsive biomaterial can decolorize a common textile dye pollutant, indigo carmine, potentially serving as a tool in environmental bioremediation. Finally, cells are engineered for inducible cell death to eliminate their presence once their activity is no longer required, which is an important function for biocontainment and minimizing environmental impact. By integrating genetically engineered stimuli-responsive cyanobacteria in volumetric 3D-printed designs, we demonstrate programmable photosynthetic biocomposite materials capable of producing functional outputs including, but not limited to, bioremediation.

Design, characterization and applications of nanocolloidal hydrogels

Nanocolloidal gels (NCGs) are an emerging class of soft matter, in which nanoparticles act as building blocks of the colloidal network. Chemical or physical crosslinking enables NCG synthesis and assembly from a broad range of nanoparticles, polymers, and low-molecular weight molecules. The synergistic properties of NCGs are governed by nanoparticle composition, dimensions and shape, the mechanism of nanoparticle bonding, and the NCG architecture, as well as the nature of molecular crosslinkers. Nanocolloidal gels find applications in soft robotics, bioengineering, optically active coatings and sensors, optoelectronic devices, and absorbents. This review summarizes currently scattered aspects of NCG formation, properties, characterization, and applications. We describe the diversity of NCG building blocks, discuss the mechanisms of NCG formation, review characterization techniques, outline NCG fabrication and processing methods, and highlight most common NCG applications. The review is concluded with the discussion of perspectives in the design and development of NCGs.

Polysaccharide-based biomaterials in a journey from 3D to 4D printing

3D printing is a state-of-the-art technology for the fabrication of biomaterials with myriad applications in translational medicine. After stimuli-responsive properties were introduced to 3D printing (known as 4D printing), intelligent biomaterials with shape configuration time-dependent character have been developed. Polysaccharides are biodegradable polymers sensitive to several physical, chemical, and biological stimuli, suited for 3D and 4D printing. On the other hand, engineering of mechanical strength and printability of polysaccharide-based scaffolds along with their aneural, avascular, and poor metabolic characteristics need to be optimized varying printing parameters. Multiple disciplines such as biomedicine, chemistry, materials, and computer sciences should be integrated to achieve multipurpose printable biomaterials. In this work, 3D and 4D printing technologies are briefly compared, summarizing the literature on biomaterials engineering though printing techniques, and highlighting different challenges associated with 3D/4D printing, as well as the role of polysaccharides in the technological shift from 3D to 4D printing for translational medicine.

Biohybrids: Textile fibres provide scaffolds and highways for microbial translocation

Introduction: Living materials (biohybrids, textile-microbial hybrids, hybrid living materials) have gained much attention in recent years with enormous potential for applications in biomedical science, the built environment, construction and architecture, drug delivery and as environmental biosensors. Living materials contain matrices which incorporate microorganisms or biomolecules as the bioactive components. A cross-disciplinary approach, operating at the intersection of creative practice and scientific research, incorporated textile technology and microbiology to demonstrate textile fibres providing microbial scaffolds and highways during this study. Methods: The study evolved from previous research which showed bacteria utilising the water layer surrounding fungal mycelium for motility, termed the 'fungal highway', which led to the investigation of the directional dispersal of microbes across a range of fibre types (natural and synthetic). The application of the study centred around the potential for biohybrids to be used as a biotechnology to improve oil bioremediation through seeding of hydrocarbon-degrading microbes into polluted environments via fungal or fibre highways, therefore treatments in the presence of crude oil were tested. Furthermore, from a design perspective, textiles have huge potential to act as a conduit for water and nutrients, essential to sustain microorganisms within living materials. Using the moisture absorption properties of natural fibres, the research explored how to engineer variable liquid absorption rates using cellulosics and wool to produce shape-changing knitted fabrics suitable for adaptation to oil spill capture. Results: At a cellular scale, confocal microscopy provided evidence to show that bacteria were able to utilise a water layer surrounding the fibres, supporting the hypothesis that fibres can aid bacterial translocation through their use as 'fibre highways'. A motile bacterial culture, Pseudomonas putida, was shown to translocate around a liquid layer surrounding polyester, nylon, and linen fibres, yet no evidence of translocation was apparent on silk or wool fibres, suggesting microbes elicit different responses to specific fibre types. Findings showed that translocation activity around highways did not diminish in the presence of crude oil, known to contain an abundance of toxic compounds, in comparison to oil-free controls. A design series demonstrated the growth of fungal mycelium (Pleurotus ostreatus) through knitted structures, highlighting the ability for natural fabrics to provide a scaffold to support microbial communities whilst retaining the ability to undergo environmentally responsive shape-change. A final prototype, Ebb&Flow, demonstrated the potential to scale up the responsive capacities of the material system using locally produced UK wool. The prototype conceptualised both the uptake of a hydrocarbon pollutant by fibres, and the translocation of microbes along fibre highways. Discussion: The research works towards facilitating the translation of fundamental science and design into biotechnological solutions that can be used in real world applications.

Additive Manufacturing of Engineered Living Materials with Bio-augmented Mechanical Properties and Resistance to Degradation

Engineered living materials (ELMs) combine living cells with polymeric matrices to yield unique materials with programmable functions. While the cellular platform and the polymer network determine the material properties and applications, there are still gaps in our ability to seamlessly integrate the biotic (cellular) and abiotic (polymer) components into singular material, then assemble them into devices and machines. Herein, we demonstrated the additive-manufacturing of ELMs wherein bioproduction of metabolites from the encapsulated cells enhanced the properties of the surrounding matrix. First, we developed aqueous resins comprising bovine serum albumin (BSA) and poly(ethylene glycol diacrylate) (PEGDA) with engineered microbes for vat photopolymerization to create objects with a wide array of 3D form factors. The BSA-PEGDA matrix afforded hydrogels that were mechanically stiff and tough for use in load-bearing applications. Second, we demonstrated the continuous in situ production of L-DOPA, naringenin, and betaxanthins from the engineered cells encapsulated within the BSA-PEGDA matrix. These microbial metabolites bioaugmented the properties of the BSA-PEGDA matrix by enhancing the stiffness (L-DOPA) or resistance to enzymatic degradation (betaxanthin). Finally, we demonstrated the assembly of the 3D printed ELM components into mechanically functional bolts and gears to showcase the potential to create functional ELMs for synthetic living machines.

Gene expression dynamics in input-responsive engineered living materials programmed for bioproduction

Engineered living materials (ELMs) fabricated by encapsulating microbes in hydrogels have great potential as bioreactors for sustained bioproduction. While long-term metabolic activity has been demonstrated in these systems, the capacity and dynamics of gene expression over time is not well understood. Thus, we investigate the long-term gene expression dynamics in microbial ELMs constructed using different microbes and hydrogel matrices. Through direct gene expression measurements of engineered E. coli in F127-bisurethane methacrylate (F127-BUM) hydrogels, we show that inducible, input-responsive genetic programs in ELMs can be activated multiple times and maintained for multiple weeks. Interestingly, the encapsulated bacteria sustain inducible gene expression almost 10 times longer than free-floating, planktonic cells. These ELMs exhibit dynamic responsiveness to repeated induction cycles, with up to 97% of the initial gene expression capacity retained following a subsequent induction event. We demonstrate multi-week bioproduction cycling by implementing inducible CRISPR transcriptional activation (CRISPRa) programs that regulate the expression of enzymes in a pteridine biosynthesis pathway. ELMs fabricated from engineered S. cerevisiae in bovine serum albumin (BSA) - polyethylene glycol diacrylate (PEGDA) hydrogels were programmed to express two different proteins, each under the control of a different chemical inducer. We observed scheduled bioproduction switching between betaxanthin pigment molecules and proteinase A in S. cerevisiae ELMs over the course of 27 days under continuous cultivation. Overall, these results suggest that the capacity for long-term genetic expression may be a general property of microbial ELMs. This work establishes approaches for implementing dynamic, input-responsive genetic programs to tailor ELM functions for a wide range of advanced applications.

Engineered Living Materials For Sustainability

Recent advances in synthetic biology and materials science have given rise to a new form of materials, namely engineered living materials (ELMs), which are composed of living matter or cell communities embedded in self-regenerating matrices of their own or artificial scaffolds. Like natural materials such as bone, wood, and skin, ELMs, which possess the functional capabilities of living organisms, can grow, self-organize, and self-repair when needed. They also spontaneously perform programmed biological functions upon sensing external cues. Currently, ELMs show promise for green energy production, bioremediation, disease treatment, and fabricating advanced smart materials. This review first introduces the dynamic features of natural living systems and their potential for developing novel materials. We then summarize the recent research progress on living materials and emerging design strategies from both synthetic biology and materials science perspectives. Finally, we discuss the positive impacts of living materials on promoting sustainability and key future research directions.

Cell-Laden Scaffolds for Vascular-Innervated Bone Regeneration

For regeneration of highly vascularized and innervated tissues, like bone, simultaneous ingrowth of blood vessels and nerves is essential but largely neglected. To address this issue, a "pre-angiogenic" cell-laden scaffold with durable angiogenic functions is prepared according to the bioactivities of silicate bioceramics and the instructive effects of vascular cells on neurogenesis and bone repair. Compared with traditional cell-free scaffolds, the prepared cell-laden scaffolds printed with active cells and bioactive inks can support long-term cell survival and growth for three weeks. The long-lived scaffolds exhibited durable angiogenic capability both in vitro and in vivo. The pre-angiogenic scaffolds can induce the neurogenetic differentiation of neural cells and the osteogenic differentiation of mesenchymal stem cells by the synergistic effects of released bioactive ions and the ability of vascular cells to attract neurons. The enhanced bone regeneration with both vascularization and innervation is attributed to these physiological functions of the pre-angiogenic cell-laden scaffolds, which is defined as "vascular-innervated" bone regeneration. It is suggested that the concept of "vascular-innervated scaffolds" may represent the future direction of biomaterials for complex tissue/organ regeneration.

Bacteria-based bioactive materials for cancer imaging and therapy

Owing to the unique biological functions, bacteria as biological materials have been widely used in biomedical field. With advances in biotechnology and nanotechnology, various bacteria-based bioactive materials were developed for cancer imaging and therapy. In this review, different types of bacteria-based bioactive materials and their construction strategies were summarized. The advantages and property-function relationship of bacteria-based bioactive materials were described. Representative researches of bacteria-based bioactive materials in cancer imaging and therapy were illustrated, revealing general ideas for their construction. Also, limitation and challenges of bacteria-based bioactive materials in cancer research were discussed.

Living Cellulose Materials with Tunable Viscoelasticity through Probiotic Proliferation

Probiotic cellulose (PC), a living material (LM) consisting of probiotics integrated into bacterial cellulose, is the first example where life (probiotic proliferation) is the input to tune the viscoelasticity of the biomaterial. The gradual proliferation of probiotics within the matrix acts as a key modulator of the cellulose viscoelasticity, providing from celluloses with lower-than-matrix viscoelasticity to celluloses with viscoelastic moduli closer to those of elastic solids. This concept is a promising approach to producing living bio-ink with tunable viscoelastic response of special interest for specific applications such as 3D printing. In contrast to the most common hydrogels with stimuli-tunable mechanical properties, which require external stimuli such as mechanical stress, UV radiation, or heat, this living bio-ink only requires time to tune from a fluid-like into a solid-like biomaterial.

3D printing of cell-delivery scaffolds for tissue regeneration

Tissue engineering strategy that combine biomaterials with living cells has shown special advantages in tissue regeneration and promoted the development of regenerative medicine. In particular, the rising of 3D printing technology further enriched the structural design and composition of tissue engineering scaffolds, which also provided convenience for cell loading and cell delivery of living cells. In this review, two types of cell-delivery scaffolds for tissue regeneration, including 3D printed scaffolds with subsequent cell-seeding and 3D cells bioprinted scaffolds, are mainly reviewed. We devote a major part to present and discuss the recent advances of two 3D printed cell-delivery scaffolds in regeneration of various tissues, involving bone, cartilage, skin tissues etc. Although two types of 3D printed cell-delivery scaffolds have some shortcomings, they do have generally facilitated the exploration of tissue engineering scaffolds in multiple tissue regeneration. It is expected that 3D printed cell-delivery scaffolds will be further explored in function mechanism of seeding cells in vivo, precise mimicking of complex tissues and even organ reconstruction under the cooperation of multiple fields in future.

Design and biofabrication of bacterial living materials with robust and multiplexed biosensing capabilities

The intertwined adoption of synthetic biology and 3D bioprinting has the potential to improve different application fields by fabricating engineered living materials (ELMs) with unnatural genetically-encoded sense & response capabilities. However, efforts are still needed to streamline the fabrication of sensing ELMs compatible with field use and improving their functional complexity. To investigate these two unmet needs, we adopted a workflow to reproducibly construct bacterial ELMs with synthetic biosensing circuits that provide red pigmentation as visible readout in response to different proof-of-concept chemical inducers. We first fabricated single-input/single-output ELMs and we demonstrated their robust performance in terms of longevity (cell viability and evolutionary stability >15 days, and long-term storage >1 month), sensing in harsh, non-sterile or nutrient-free conditions compatible with field use (soil, water, and clinical samples, including real samples from Pseudomonas aeruginosa infected patients). Then, we fabricated ELMs including multiple spatially-separated biosensor strains to engineer: level-bar materials detecting molecule concentration ranges, multi-input/multi-output devices with multiplexed sensing and information processing capabilities, and materials with cell-cell communication enabling on-demand pattern formation. Overall, we showed successful field use and multiplexed functioning of reproducibly fabricated ELMs, paving the way to a future automation of the prototyping process and boosting applications of such devices as in-situ monitoring tools or easy-to-use sensing kits.

Controlling shape morphing and cell release in engineered living materials

Engineered living materials (ELMs) derive functionality from both a polymer matrix and the behavior of living cells within the material. The long-term goal of this work is to enable a system of ELM-based medical devices with both mechanical and bioactive functionality. Here, we fabricate multifunctional, stimuli-responsive ELMs comprised of acrylic hydrogel matrix and Escherichia coli. These ELMs undergo controlled changes in form and have a controlled release of bacteria from the composite. We hypothesize that the mechanical forces associated with cell proliferation within a covalently-crosslinked, non-degradable hydrogel are responsible for both phenomena. At constant cell loading, increased hydrogel elastic modulus significantly reduces both cell delivery and volume change associated with cell proliferation. ELMs that change volume over 100 % also result in ~106 colony forming units/mL in the growth medium over 2 h after 1 day of growth. At constant monomer feed ratios, increased cell loading leads to significantly increased cell delivery. Finally, these prokaryotic ELMs were investigated for their potential to deliver a probiotic that can reduce the proliferation of a uropathogen in vitro. Controlling the long-term delivery of bacteria could potentially be used in biomedical applications to modulate microbial communities within the human body.

Biohybrid materials: Structure design and biomedical applications

Biohybrid materials are proceeded by integrating living cells and non-living materials to endow materials with biomimetic properties and functionalities by supporting cell proliferation and even enhancing cell functions. Due to the outstanding biocompatibility and programmability, biohybrid materials provide some promising strategies to overcome current problems in the biomedical field. Here, we review the concept and unique features of biohybrid materials by comparing them with conventional materials. We emphasize the structure design of biohybrid materials and discuss the structure-function relationships. We also enumerate the application aspects of biohybrid materials in biomedical frontiers. We believe this review will bring various opportunities to promote the communication between cell biology, material sciences, and medical engineering.

4D Printing of Hydrogels: Innovation in Material Design and Emerging Smart Systems for Drug Delivery

Advancements in the material design of smart hydrogels have transformed the way therapeutic agents are encapsulated and released in biological environments. On the other hand, the expeditious development of 3D printing technologies has revolutionized the fabrication of hydrogel systems for biomedical applications. By combining these two aspects, 4D printing (i.e., 3D printing of smart hydrogels) has emerged as a new promising platform for the development of novel controlled drug delivery systems that can adapt and mimic natural physio-mechanical changes over time. This allows printed objects to transform from static to dynamic in response to various physiological and chemical interactions, meeting the needs of the healthcare industry. In this review, we provide an overview of innovation in material design for smart hydrogel systems, current technical approaches toward 4D printing, and emerging 4D printed novel structures for drug delivery applications. Finally, we discuss the existing challenges in 4D printing hydrogels for drug delivery and their prospects.

Three-dimensional bioprinting: A cutting-edge tool for designing and fabricating engineered living materials

The design of engineered living materials (ELMs) is an emerging field developed from synthetic biology and materials science principles. ELMs are multi-scale bulk materials that combine the properties of self-healing and organism adaptability with the designed physicochemical or mechanical properties for functional applications in various fields, including therapy, electronics, and architecture. Among the many ELM design and manufacturing methods, three-dimensional (3D) bioprinting stands out for its precise control over the structure of the fabricated constructs and the spatial distribution of cells. In this review, we summarize the progress in the field, cell type and material selection, and the latest applications of 3D bioprinting to manufacture ELMs, as well as their advantages and limitations, hoping to deepen our understanding and provide new insights into ELM design. We believe that 3D bioprinting will become an important development direction and provide more contributions to this field.

4D Printing: A Cutting-edge Platform for Biomedical Applications

Nature's materials have evolved over time to be able to respond to environmental stimuli by generating complex structures that can change their functions in response to distance, time, and direction of stimuli. A number of technical efforts are currently being made to improve printing resolution, shape fidelity, and printing speed to mimic the structural design of natural materials with three-dimensional (3D) printing. Unfortunately, this technology is limited by the fact that printed objects are static and cannot be reshaped dynamically in response to stimuli. In recent years, several smart materials have been developed that can undergo dynamic morphing in response to a stimulus, thus resolving this issue. Four-dimensional (4D) printing refers to a manufacturing process involving additive manufacturing, smart materials, and specific geometries. It has become an essential technology for biomedical engineering and has the potential to create a wide range of useful biomedical products. This paper will discuss the concept of 4D bioprinting and the recent developments in smart matrials, which can be actuated by different stimuli and be exploited to develop biomimetic materials and structures, with significant implications for pharmaceutics and biomedical research, as well as prospects for the future.

Antibacterial hydrogels of aromatic tripeptides

Self-assembled peptide hydrogels have emerged as alternatives to the conventional approaches employed in controlled drug release, wound-healing, and drug delivery, and as anti-infective agents. However, peptide hydrogels possessing antibacterial properties are less explored. In this work, we have designed three ultrashort antibacterial peptide hydrogels: Fmoc-FFH-CONH₂, Fmoc-FHF-CONH₂, and Fmoc-HFF-CONH₂. The rheological study showed the higher storage modulus of Fmoc-FFH-CONH₂ (30.43 kPa) compared to Fmoc-FHF-CONH₂ and Fmoc-HFF-CONH₂, which may be attributed to the enhanced aromatic interaction in Fmoc-FFH-CONH₂ compared to the other two variants, resulting in more mechanical rigidity. Further, the prepared hydrogels were evaluated for their inherent antibacterial potency against Gram-positive (Staphylococcus aureus, strain MTCC 96) and Gram-negative (Pseudomonas aeruginosa, strain PA01) bacteria. Antibacterial experiments demonstrated the potency of the hydrogels in the order of Fmoc-FFH-CONH₂ > Fmoc-FHF-CONH₂ > Fmoc-HFF-CONH₂. The antibacterial effect of the hydrogels was predominantly due to the osmotic stress and membrane disruption, which was verified by reactive oxygen species (ROS) generation and outer membrane permeabilization assays. Our findings point to the scope of using the synthesized peptide hydrogels as agents for topical applications.

Engineered living materials (ELMs) design: From function allocation to dynamic behavior modulation

Natural materials possess many distinctive "living" attributes, such as self-growth, self-healing, environmental responsiveness, and evolvability, that are beyond the reach of many existing synthetic materials. The emerging field of engineered living materials (ELMs) takes inspiration from nature and harnesses engineered living systems to produce dynamic and responsive materials with genetically programmable functionalities. Here, we identify and review two main directions for the rational design of ELMs: first, engineering of living materials with enhanced performances by incorporating functional material modules, including engineered biological building blocks (proteins, polysaccharides, and nucleic acids) or well-defined artificial materials; second, engineering of smart ELMs that can sense and respond to their surroundings by programming dynamic cellular behaviors regulated via cell-cell or cell-environment interactions. We next discuss the strengths and challenges of current ELMs and conclude by providing a perspective of future directions in this promising area.

Antimicrobial polymeric biomaterials based on synthetic, nanotechnology, and biotechnological approaches

Antimicrobial resistance is the main threat to biomaterial failure with a huge impact on National Health Systems and patients' quality of life. Materials engineering and biotechnology have experienced great advances and have converged in the development of new and more sophisticated biomimetic systems with antimicrobial properties. In this sense, polymeric biomaterials play and will play a key role in the development of new antimicrobial devices for biomedical applications. In this Current Opinion article, we review recent and relevant advances reported in the field of polymeric biomaterials with antimicrobial properties with the potential to be applied in the clinic, that is, antimicrobial polymers, antifouling surfaces, nanodelivery systems of antibiotics and antiseptic drugs, biocide polymer-metal hybrid systems, and engineered living materials that actively interact with the pathogen. We conclude with a discussion on the implications of the results for clinical practice and future research.

Engineered Living Hydrogels

Living biological systems, ranging from single cells to whole organisms, can sense, process information, and actuate in response to changing environmental conditions. Inspired by living biological systems, engineered living cells and nonliving matrices are brought together, which gives rise to the technology of engineered living materials. By designing the functionalities of living cells and the structures of nonliving matrices, engineered living materials can be created to detect variability in the surrounding environment and to adjust their functions accordingly, thereby enabling applications in health monitoring, disease treatment, and environmental remediation. Hydrogels, a class of soft, wet, and biocompatible materials, have been widely used as matrices for engineered living cells, leading to the nascent field of engineered living hydrogels. Here, the interactions between hydrogel matrices and engineered living cells are described, focusing on how hydrogels influence cell behaviors and how cells affect hydrogel properties. The interactions between engineered living hydrogels and their environments, and how these interactions enable versatile applications, are also discussed. Finally, current challenges facing the field of engineered living hydrogels for their applications in clinical and environmental settings are highlighted.

Development of Organogels for Live Yarrowia lipolytica Encapsulation

Encapsulation of cells/microorganisms attracts great attention in many applications, but current studies mainly focus on hydrophilic encapsulation materials. Herein, we develop a new class of hydrophobic and lipophilic organogels for highly efficient encapsulation of Yarrowia lipolytica, an oleaginous yeast, by a mild and nonsolvent photopolymerization method. The organogels allow free diffusion of hydrophobic molecules that oleaginous yeasts require to survive and function. Moreover, they are mechanically robust and possess favorable biocompatibility, thus providing a free-standing platform and an ideal survival environment for oleaginous Y. lipolytica encapsulation. By tuning monomer structures and cross-linking densities, the optimized organogel, Gel_12-1.5%, achieves the highest viability of ∼96%. Furthermore, organogels can inhibit the cryoinjuries to oleaginous yeasts in cryopreservation, exhibiting the potential for long-term storage. It is also found that with varying alkyl lengths, the organogels show different temperature-dependent phase transition properties, which enable the rapid selection of targeted yeasts for steganography. Findings in this work provide guidance for designing biocompatible, hydrophobic, and lipophilic encapsulation materials.

Progress of engineered bacteria for tumor therapy

Recently, with the rapid development of bioengineering technology and nanotechnology, natural bacteria were modified to change their physiological activities and therapeutic functions for improved therapeutic efficiency of diseases. These engineered bacteria were equipped to achieve directed genetic reprogramming, selective functional reorganization and precise spatio-temporal control. In this review, research progress in the basic modification methodologies of engineered bacteria were summarized, and representative researches about their therapeutic performances for tumor treatment were illustrated. Moreover, the strategies for the construction of engineered colonies based on engineering of individual bacteria were summarized, providing innovative ideas for complex functions and efficient anti-tumor treatment. Finally, current limitation and challenges of tumor therapy utilizing engineered bacteria were discussed.

Digitally Programmable Manufacturing of Living Materials Grown from Biowaste

Material manufacturing strategies that use little energy, valorize waste, and result in degradable products are urgently needed. Strategies that transform abundant biomass into functional materials form one approach to these emerging manufacturing techniques. From a biological standpoint, morphogenesis of biological tissues is a "manufacturing" mode without energy-intensive processes, large carbon footprints, and toxic wastes. Inspired by biological morphogenesis, we propose a manufacturing strategy by embedding living Saccharomyces cerevisiae (Baker's yeast) within a synthetic acrylic hydrogel matrix. By culturing the living materials in media derived from bread waste, encapsulated yeast cells can proliferate, resulting in a dramatic dry mass and volume increase of the whole living material. After growth, the final material is up to 96 wt % biomass and 590% larger in volume than the initial object. By digitally programming the cell viability through UV irradiation or photodynamic inactivation, the living materials can form complex user-defined relief surfaces or 3D objects during growth. Ultimately, the grown structures can also be designed to be degradable. The proposed living material manufacturing strategy cultured from biowaste may pave the way for future ecologically friendly manufacturing of materials.

A pressure-induced ratiometric signalling chemosensor: a case of helical anthracenes

One of the helical anthracenes, [4]HA, in which two fused anthracene ends are spatially arranged top and bottom, exhibits a ratiometric fluorescence response due to the hydrostatic pressure-dependent intramolecular [4+4] photocyclodimerization. This ratiometric signalling comes from the formation of an intramolecular stacked species and its subsequent photoreaction upon hydrostatic pressurization. The ratiometric indexes as a function of hydrostatic pressure may enable us to quantify an unknown pressure in solutions.