A tough, adhesive, self-healable, and antibacterial plant-inspired hydrogel based on pyrogallol-borax dynamic cross-linking

Pyrogallic acid-compatibilized polylactic acid/thermoplastic starch blend produced via one-step twin-screw extrusion

In this study, a one-step extrusion method is proposed to prepare blended polylactic acid (PLA)/thermoplastic starch (TPS) using a novel plant-derived compatibilizer, pyrogallic acid (PGA), to enhance the PLA/TPS compatibility. The effects of PGA on the mechanical behavior, fractured cross-section morphology, thermal and dynamic mechanical performance, and water resistance of PLA/TPS blends were systematically studied. Results demonstrate that the addition of PGA effectively improves the compatibility between TPS and PLA, resulting in enhanced tensile strength, crystallinity, elongation at break, thermal stability, and hydrophobicity of the blends. Specifically, incorporating 1.5 phr of PGA into the blend system yields the highest values for tensile strength (23.38 MPa) and elongation at break (16.96 %), which are 24.7 % and 233.2 %, respectively, higher than those observed for pure PLA/TPS blends. Furthermore, other properties exhibit obvious improvements upon incorporation of PGA into the blends. This approach provides a promising strategy for enhancing the performance of PLA/TPS blends and expanding their applications in food packaging, agricultural film, etc.

Rational Design and Testing of Antibacterial Aloe Vera Hemostatic Hydrogel

Bleeding resulting from surgical procedures or trauma, including gunshot wounds, represents a life-threatening health issue. Therefore, the development of safe, effective, and convenient hemostatic agents is critical in securing the "golden time" to save patients' lives. Plant-derived compounds and plant extracts have been regarded as promising sources of hemostatic agents in previous studies, regulating hemostatic function with low toxicity and minimal side effects within the human body. Aloe vera-based hydrogels, which are characterized by flexible strength and high functionality, have emerged as a promising platform for wound applications due to their unique biocompatibility features. This study provides a comprehensive exploration of the utilization of thickening agents and natural agents such as xanthan gum, carrageenan, Carbomer, and alginate in applying aloe vera-based hydrogels as a hemostatic. Furthermore, it also tests the use of aloe vera-based hydrogels for therapeutic delivery at wound sites through the incorporation of various antimicrobial agents to extend the utility of the hydrogels beyond hemostasis. Our novel applied research utilizes aloe vera-based hydrogel as an antimicrobial hemostatic agent, providing valuable insights for a wide range of applications and highlighting its potential to enhance hemorrhage control in various emergency scenarios.

Dynamic Hydrogels against Infections: From Design to Applications

Human defense against infection remains a global topic. In addition to developing novel anti-infection drugs, therapeutic drug delivery strategies are also crucial to achieving a higher efficacy and lower toxicity of these drugs for treatment. The application of hydrogels has been proven to be an effective localized drug delivery approach to treating infections without generating significant systemic adverse effects. The recent emerging dynamic hydrogels further show power as injectable formulations, giving new tools for clinical treatments. In this review, we delve into the potential applications of dynamic hydrogels in antibacterial and antiviral treatments and elaborate on their molecular designs and practical implementations. By outlining the chemical designs underlying these hydrogels, we discuss how the choice of dynamic chemical bonds affects their stimulus responsiveness, self-healing capabilities, and mechanical properties. Afterwards, we focus on how to endow dynamic hydrogels with anti-infection properties. By comparing different drug-loading methods, we highlight the advantages of dynamic chemical bonds in achieving sustained and controlled drug release. Moreover, we also include the design principles and uses of hydrogels that possess inherent anti-infective properties. Furthermore, we explore the design principles and applications of hydrogels with inherent anti-infective properties. Finally, we briefly summarize the current challenges faced by dynamic hydrogels and present a forward-looking vision for their future development. Through this review, we expect to draw more attention to these therapeutic strategies among scientists working with chemistry, materials, as well as pharmaceutics.

A nanocomposite hydrogel loaded with Ag nanoparticles reduced by aloe vera polysaccharides as an antimicrobial multifunctional sensor

Developing high-performance hydrogels with anti-freeze, and antimicrobial properties is crucial for the practical application of flexible sensors. In this study, we prepared silver nanoparticles (AgNPs) with aloe polysaccharide (AP) as a reducing agent. Then, the AP/AgNPs were added to a system of polyvinyl alcohol and borax crosslinked in water/glycerol to obtain a multifunctional conductive hydrogel. The incorporated AgNPs improved the conductivity (0.39 S/m) and mechanical properties (elongation at break: 732.9 %, fracture strength: 1267.6 kPa) of the hydrogel. In addition, resultant hydrogel exhibited potential for sensing strain, temperature, and humidity. When used as a strain sensor, the hydrogel system exhibited low detection limit (0.1 %), and fast response (0.08 s). The resistance of the hydrogel decreased with an increase in the absorbed moisture content, enabling humidity detection (25-95 %) to monitor breathing status. As a temperature sensor, the hydrogel supported a wide detection range (-50 to +90 °C) and sensitivity (-30-0 °C, temperature coefficient of resistance (TCR) = -5.64 %/°C) to detect changes in the ambient temperature. This study proposes a simple method for manufacturing multifunctional hydrogel sensors, which broadens their application prospects in wearable sensing and electronic products.

Injectable plant-derived polysaccharide hydrogels with intrinsic antioxidant bioactivity accelerate wound healing by promoting epithelialization and angiogenesis

Skin wound healing is a complex and dynamic process involving hemostasis, inflammatory response, cell proliferation and migration, and angiogenesis. Currently used wound dressings remain unsatisfactory in the clinic due to the lack of adjustable mechanical property for injection operation and bioactivity for accelerating wound healing. In this work, an "all-sugar" hydrogel dressing is developed based on dynamic borate bonding network between the hydroxyl groups of okra polysaccharide (OP) and xyloglucan (XG). Benefiting from the reversible crosslinking network, the resulting composite XG/OP hydrogels exhibited good shear-thinning and fast self-healing properties, which is suitable to be injected at wound beds and filled into irregular injured site. Besides, the proposed XG/OP hydrogels showed efficient antioxidant capacity by scavenging DPPH activity of 73.9 %. In vivo experiments demonstrated that XG/OP hydrogels performed hemostasis and accelerated wound healing with reduced inflammation, enhanced collagen deposition and angiogenesis. This plant-derived dynamic hydrogel offers a facile and effective approach for wound management and has great potential for clinical translation in feature.

Gallic acid-functionalized soy protein-based multiple cross-linked hydrogel: Mechanism analysis, physicochemical properties, and digestive characteristics

Herein, carbodiimide hydrochloride/N-hydroxysuccinimide was used to mediate the grafting of gallic acid (GA) (0.005, 0.0015, and 0.025 wt%) with soybean protein isolate (SPI) in the preparation of SPI-GA conjugates and hydrogels. The modified materials were primarily joined via the CN bonds and exhibited excellent antioxidant properties. In addition, spectral analysis revealed that the grafting of GA increased the flexibility of the SPI structure. The SPI-GA hydrogel is fabricated through covalent/non-covalent cross-linking mechanisms, including Schiff base, Michael addition, and hydrogen bonding. Furthermore, the microstructure, rheological properties, thermal stability, and textural properties of the hydrogel were affected by the amount of GA grafted. The SPI-GA hydrogel exhibited the best performance when the amount of GA graft was 0.015 wt%. Furthermore, the tightly cross-linked structure of SPI-GA prevented premature degradation of the protein by pepsin. In conclusion, these capabilities provide numerous possibilities for the development of multifunctional and active substance delivery carriers.

Optimization of rapid self-healing and self-adhesive gluten/guar gum crosslinked gel for strain sensors and electronic devices

In this study, a smart strain sensor based on gluten/guar gum (GG) copolymer containing a combination of additives was developed. The mix proportions of strain sensors were designed using Taguchi method coupled with Grey relational analysis. L16 orthogonal array with three factors, viz. tannic acid (TA), glycerol and sodium chloride (NaCl) at four-levels each was optimized. The addition of TA substantially enhanced tensile strength, self-adhesion ability and conductivity. The self-adhesion ability could also be improved by adding NaCl in range of 0-5 wt%. The presence of glycerol in strain sensors could reduce the self-healing time which was found in the range of 28.75-150 s. In addition, the incorporation of glycerol into gel also improved stretchability of strain sensors. The best mix proportion of strain sensor was found to be 3.75 wt% TA, 30 vol% glycerol and 5 wt% NaCl. The best mixture of stain sensor showed the highest gauge factor (GF) of 0.61 % at a stretchability of 665 % and rapid self-healing at 70 s. This strain sensor could be applied to monitor human limb movements in a wide temperature range from -20 °C to 50 °C. Furthermore, the obtained gel was successfully used as electronic devices and self-powered sensors.

Recent progress of antibacterial hydrogels in wound dressings

Hydrogels are essential biomaterials due to their favorable biocompatibility, mechanical properties similar to human soft tissue extracellular matrix, and tissue repair properties. In skin wound repair, hydrogels with antibacterial functions are especially suitable for dressing applications, so novel antibacterial hydrogel wound dressings have attracted widespread attention, including the design of components, optimization of preparation methods, strategies to reduce bacterial resistance, etc. In this review, we discuss the fabrication of antibacterial hydrogel wound dressings and the challenges associated with the crosslinking methods and chemistry of the materials. We have investigated the advantages and limitations (antibacterial effects and antibacterial mechanisms) of different antibacterial components in the hydrogels to achieve good antibacterial properties, and the response of hydrogels to stimuli such as light, sound, and electricity to reduce bacterial resistance. Conclusively, we provide a systematic summary of antibacterial hydrogel wound dressings findings (crosslinking methods, antibacterial components, antibacterial methods) and an outlook on long-lasting antibacterial effects, a broader antibacterial spectrum, diversified hydrogel forms, and the future development prospects of the field.

Self-adhesive, ionic-conductive, mechanically robust cellulose-based organogels with anti-freezing and rapid recovery properties for flexible sensors

Cellulose-based functional gels have received considerable attention because of their good mechanical properties, biocompatibility, and low cost. However, the preparation of cellulose gels with self-adhesion, mechanical robustness, ionic conductivity, anti-freezing ability, and environmental stability remains a challenge. Here, gallic acid esterified microcrystalline cellulose (MCC-GA) was obtained by grafting gallic acid (GA) onto the macromolecular chains of microcrystalline cellulose (MCC) through a one-step esterification method. Then the prepared MCC-GA was dissolved in Lithium chloride/dimethyl sulfoxide (LiCl/DMSO) system and polymerized with acrylic acid (AA) to prepare a multi-functional cellulose-based organogel. The prepared MCC-GA/polyacrylic acid (PAA) organogels exhibited enhanced interfacial adhesion through hydrogen bonding, π-π interactions, and electrostatic interactions. Additionally, the MCC-GA/PAA organogels could withstand 95 % of the compressive deformation and rapidly self-recover owing to chemical cross-linking and dynamic non-covalent interactions. The organogels also exhibited excellent anti-freezing properties (up to -80 °C), solvent retention, and ionic conductivity. Considering its excellent overall performance, the MCC-GA/PAA organogel was used as an effective flexible sensor for human motion detection and is expected to play an important role in the future development of flexible bioelectronics.

Self-healing, self-adhesive, and stretchable conductive hydrogel for multifunctional sensor prepared by catechol modified nanocellulose stabilized poly(α-thioctic acid)

Self-healing, self-adhesive, and stretchable bio-based conductive hydrogels exhibit properties similar to those of biological tissues, making them an urgent requirement for emerging wearable devices. The primary challenge lies in devising straightforward strategies to accomplish all the aforementioned performances and achieve equilibrium among them. This study used the natural compound thioctic acid (TA) and modified cellulose to prepare conductive hydrogels with stretchability, healing, and self-adhesion through a simple one-step strategy. Metastable poly(TA) was obtained through ring-opening polymerization of lithiated TA, followed by the introduction of dopamine-grafted cellulose nanofibers (DCNF) to stabilize poly(TA) and prepare PTALi/DCNF hydrogels with the aforementioned properties. The hydrogels demonstrated remarkable conductivity, attributed to the existence of Li + ions, with a maximum conductivity of 17.36 mS/cm. The self-healing capacity of the hydrogels was achieved owing to the presence of disulfide bond in TA. The introduction of DCNF can effectively stabilize poly(TA), endow the hydrogel with self-adhesion ability, improve the mechanical properties, and further enhance the formability of hydrogels. Generally, bio-based PTALi/DCNF hydrogels with stretchability, self-healing, self-adhesion, and conductivity are obtained through a simple strategy and used as a sensor with a wide response range and high sensitivity. Hydrogels have significant potential for application in wearable electronic devices, electronic skins, and soft robots.

Advances and Progress in Self-Healing Hydrogel and Its Application in Regenerative Medicine

A hydrogel is a three-dimensional structure that holds plenty of water, but brittleness largely limits its application. Self-healing hydrogels, a new type of hydrogel that can be repaired by itself after external damage, have exhibited better fatigue resistance, reusability, hydrophilicity, and responsiveness to environmental stimuli. The past decade has seen rapid progress in self-healing hydrogels. Self-healing hydrogels can automatically self-repair after external damage. Different strategies have been proposed, including dynamic covalent bonds and reversible noncovalent interactions. Compared to traditional hydrogels, self-healing gels have better durability, responsiveness, and plasticity. These features allow the hydrogel to survive in harsh environments or even to be injected as a drug carrier. Here, we summarize the common strategies for designing self-healing hydrogels and their potential applications in clinical practice.

Constructing a self-healing injectable SABA/Borax/PDA@AgNPs hydrogel for synergistic low-temperature photothermal antibacterial therapy

Infections caused by bacteria are one of the biggest challenges humans face around the world. Photothermal therapy (PTT) has been regarded as a promising strategy in combating pathogenic infection, however the high temperatures (55-65 °C) required during a single PTT process can induce injury to healthy tissues nearby. Combination therapy could overcome this problem by reducing the photothermal temperature. Here, we developed a self-healing and injectable hydrogel to realize low-temperature PTT (LT-PTT, ≤45 °C) for antisepsis with high-efficiency. The hybrid hydrogel is prepared by incorporating borax into a mixture of 3-aminophenylboronic acid grafted sodium alginate and nano-silver decorated polydopamine nanoparticles. Our results showed that the SABA/Borax/PDA@AgNPs hydrogel possesses satisfactory mechanical properties and self-healing capacity, and as a result, it can repair itself after being damaged mechanically, retaining its integrality and recovering its initial functionalities. Furthermore, through utilizing the photothermal property of polydopamine nanoparticles and broad-spectrum antibacterial activity of nano-silver, the hybrid hydrogel achieves excellent LT-PTT for sterilization both in vitro as well as in an in vivo mice skin wound model with no distinct injury to normal tissues. Overall, our prepared hydrogel is expected to be an excellent candidate for treating bacterial infections.

Highly stretchable, self-healing, and degradable ionic conductive cellulose hydrogel for human motion monitoring

Self-healing biomass-based conductive hydrogels are applied as flexible strain sensors for wearable devices and human movement monitoring. Cellulose is the most abundant biomass-based materials and exhibits excellent toughness, dispersion and degradability. In this paper, nanocellulose crystals (NCCs) prepared from sisal, used as reinforcing fillers were coated with tannic acid (TA) to prepare inexpensive bio-nanocomposite hydrogels that also included polyvinyl alcohol, okra polysaccharide (OP), and borax. These hydrogels exhibit excellent self-healing and mechanical properties with the maximum elongation, toughness, and self-healing efficiency (9 min) of 1426.2 %, 264.4 kJ/m³, and 62.1 %, respectively. A fabricated hydrogel strain sensor was successfully used to detect and monitor various human movements such as wrist bending, elbow bending, and slight changes in facial expression. In addition, this sensor possessed excellent durability and good working stability after repeated circulation. The nanocomposite hydrogel synthesized in this work utilized natural polysaccharide to manufacture flexible functional materials with good application prospects in the field of flexible sensors.

Polyvinyl alcohol/carboxymethyl chitosan hydrogel loaded with silver nanoparticles exhibited antibacterial and self-healing properties

Hydrogel materials are gradually increasing research in biological aspects due to their unique properties. In order to prepare hydrogels with the potential to be used in clinical wound therapy, the authors prepared a bifunctional hydrogel with antibacterial and self-healing properties. The hydrogel was composed of borax cross-linked polyvinyl alcohol (PVA) and carboxymethyl chitosan (CMCS), which realizes self-healing between polymers through hydrogen bonds and borate ester bonds. The double cross-linking of hydrogen bonds and borate ester bonds also endows the hydrogel with better mechanical properties (toughness and tensile stress can reach 22.30 MJ/m³ and 70.35 KPa, respectively). On this basis, adding highly stable silver nanoparticles (AgNPs) to the hydrogel can effectively inhibit the growth of E. coli and S. aureus. This idea provides the possibility for the application of hydrogels in the process of biological wound healing.

Tunicate inspired gelatin-based tough hydrogel wound dressing containing twisted phthalazinone with adhesive, self-healing and antibacterial properties

As a hydrolytic product of collagen, gelatin is a polypeptide of biological origin. Gelatin hydrogels emerge as promising material candidates for traditional dressings due to good biocompatibility and the ability to keep wounds moist. However, it is difficult to simultaneously achieve gelatin hydrogel with robust mechanical property for long-term usage, reliable tissue adhesion, self-healing and antibacterial properties. Herein, we propose a simply synthesized strategy of a multifunctional gelatin hydrogel dressing, which is constructed by conjugating a newly synthesized 2-(4'-aldehydephenyl)-4-(2',3',4'-trihydroxyphenyl)-2,3-phthalazine-1(2H)-one (THPZB) to gelatin with Schiff base and chelating with Fe³⁺ ions (termed G/THPZB/Fe hydrogel). The twisted structure of phthalazinone in THPZB leads to entanglement of gelatin molecular chains, which resolves the stiffness-toughness conflict of the hydrogel. Furthermore, the strong tissue adhesion and fast self-healing capability mainly originate from the hydrogen bonding of the pyrogallol in THPZB. In vitro study shows that the hydrogels possess good biocompatibility with L929 cells, hemostatic and antibacterial activity. In the rat model of skin infection, the hydrogel dressing not only have no adverse effects on vital organs, but also can effectively promote wound healing of bacterial infection. Considering that it has multiple functions, G/THPZB/Fe hydrogel can be used as a promising wound dressing for biomedical applications.

Stretchable and fatigue resistant hydrogels constructed by natural galactomannan for flexible sensing application

Exploration of sustainable and functional materials from biomolecules has received much interest, while the limited mechanical property and possible bacterial contamination were proved to be their major shortages. Here, we proposed novel double network (DN) hydrogels based on galactomannan (GM) polysaccharide as backbone. Folic acid (FA) and polyacrylamide (PAM) were introduced to form hydrogen bond linkages and covalent bond networks respectively. The three-dimensional hydrogel networks showed greatly improved mechanical strength. Impressive compressive fatigue resistance was present for 100 cycles' compression forming only 0.7 % shape deformation. The phenomenon was mainly attributed to promoted stress-bearing and energy dissipation from the DN cross-linking. The GM hydrogels also exhibited good electronic conductivity and excellent anti-bacterial capabilities with inhibition against more than 80 % of E. coli., attributing to the tunable attachments of FA. Thus, we provided multi-functional hydrogels of high potential serving as anti-fatigue/bacterial and conductive strain sensors on the fields of wearable devices.

Robust Silk Protein Hydrogels Made by a Facile One-Step Method and Their Multiple Applications

Silk fibroin is a natural polymer that has various material forms and wide applications. Hydrogel is one of the most attractive silk materials because of its hydrophilicity, biocompatibility, and flexibility. However, its applications are still quite limited because they have a complicated preparation process and/or low mechanical strength. Herein, a simple way to prepare tough silk fibroin hydrogels via a solvent-exchange method is introduced. The degummed silk fiber was directly dissolved in a calcium chloride/formic acid solution and then water was used to replace the solvent. The silk fibroin hydrogel that was obtained using this facile method exhibited even better mechanical properties than most silk fibroin hydrogels that have been reported in the literature. Also, the silk fibroin hydrogel maintained biocompatibility that was as good as that prepared via other methods. Finally, the possibility of using this regenerated silk fibroin hydrogel as a multi-functional platform (such as a catalyst carrier, photothermal agent, and underwater adhesive) has been discussed. Therefore, such a natural, sustainable, robust, and good biocompatible silk fibroin hydrogel that is prepared by an improved method may have great potential for further applications.

Breathable, Moisturizing, Anti-Oxidation SSD-PG-PVA/KGM Fibrous Membranes for Accelerating Diabetic Wound Tissue Regeneration

Diabetic wound tissue repair and regeneration is a multi-step process that includes cell proliferation and migration, gas and moisture management, and inflammatory responses. However, current wound dressing designs lack consideration of the wound microenvironment of diabetic patients, making diabetic wound tissue repair a challenge. Here, we report a wound dressing (SSD-PG-PVA/KGM) with a porous structure and anti-oxidant properties for promoting diabetic wound tissue repair. First, the porous structure created by electrospinning technology encourages cell proliferation and migration in the wound while also providing breathability and moisture retention. Second, adding natural polyphenols (PG) and saikosaponins (SSDs) to the wound reduced reactive oxygen species levels and oxide stress. In vitro cell experiments showed that SSD-PG-PVA/KGM had good biocompatibility. Due to the biocompatibility, anti-oxidation ability, breathability, and moisturizing, SSD-PG-PVA/KGM could effectively promote the repair of diabetic wound tissue (the wound closure rate was 95.6% at 14 days).

A stretchable, self-healing, okra polysaccharide-based hydrogel for fast-response and ultra-sensitive strain sensors

Self-healing conductive hydrogels have attracted widespread attention as a new generation of smart wearable devices and human motion monitoring sensors. To improve the biocompatibility and degradability of such strain sensors, we report a sensor with a sandwich structure based on a biomucopolysaccharide hydrogel. The sensor was constructed with a stretchable self-healing hydrogel composed of polyvinyl alcohol (PVA), okra polysaccharide (OP), borax, and a conductive layer of silver nanowires. The obtained OP/PVA/borax hydrogel exhibited excellent stretchability (~1073.7%) and self-healing ability (93.6% within 5 min), and the resultant hydrogel-based strain sensor demonstrated high sensitivity (gauge factor = 6.34), short response time (~20 ms), and good working stability. This study provides innovative ideas for the development of biopolysaccharide hydrogels for applications in the field of sensors.

3D printing Tannic Acid-based Gels Via Digital Light Processing

Photocurable 3D printing of polyphenol-based gels has been limited by the catechol groups, which can scavenge free radicals generated by photoinitiators during photopolymerization. Herein, we present a 3D-printed gel composed of poly-acrylamide (PAM) and tannic acid (TA), fabricated using glycerol as shielding of TA and a commercial digital light processing printer. The printed gels are based on a polymeric network interpenetrated by TA-glycerol, enabling the printed objects with various favorable properties, such as improved toughness, anti-dehydration, antioxidant and antibacterial properties, etc. The proposed strategy enables photocurable 3D printing of polyphenol-based gels with complex architecture, paving the way for future applications in various fields, ranging from soft wearable devices to tissue engineering. This article is protected by copyright. All rights reserved.

NIR-II Light-Modulated Injectable Self-Healing Hydrogel for Synergistic Photothermal/Chemodynamic/Chemo-therapy of Melanoma and Wound Healing Promotion

The development of an injectable multifunctional hydrogel with tumor therapy, antibacterial treatment and wound healing properties is essential for simultaneous eradicating melanoma and promoting wound healing of tumor-initiated skin defects....

Advances in multifunctional chitosan-based self-healing hydrogels for biomedical applications

Multifunctional self-healing hydrogels have recently attracted considerable interest in biomedical applications owing to their diverse properties, including self-healing, adhesion, conduction, antibacterial, and stimulus-response, which can meet various application requirements, ranging from wound dressings and delivery vehicles to the production of scaffolds for tissue repair and regeneration. As a natural polycationic polysaccharide with good biocompatibility, chitosan is widely used in hydrogel formation as there are many amino and hydroxyl groups along the chains that can actively participate in various physical effects and chemical reactions, which enable it to construct self-healing hydrogels and fulfill multiple functions. In this review, the formation of chitosan-based self-healing hydrogels and the related self-healing mechanism are summarized, including Schiff base, metal coordination, ionic and hydrogen bonds, hydrophobic and host-guest interactions, with a focus on the strategies for their multi-functionalization. In the last section, the applications of the chitosan-based self-healing hydrogels in the fields of wound dressings, delivery vehicles, scaffolds, and biological sensors are discussed. Overall, it is highly expected that this review could provide an insight into the prospective development of multifunctional self-healing hydrogels for biomedical applications.