Root and canal morphology of Thai mandibular molars

Internal and external morphological analysis of fused-rooted mandibular second molars in the Chinese population: A micro-computed tomographic study

This study investigated the root canal morphology of fused-rooted mandibular second molars based on the pulp chamber floor (PCF) and analysed the correlation between the external morphology of the radicular groove, and the internal morphology of the PCF and root canal configuration. A total of 291 fused-rooted teeth collected from the Chinese population were scanned using micro-computed tomography and a dental operating microscope was used for observing the PCFs. The classification of the PCF and root canal configuration were identified according to modified Min et al.'s and Gao et al.'s classifications, respectively. Additionally, a new radicular groove classification was proposed. The correlation among these morphological characteristics was investigated using the chi-square test and Fisher's exact test (p < 0.05). The results showed that 74.2% of teeth had C-shaped PCFs, while 21.0% had non-C-shaped PCFs. As for the root canal configurations, 37.5% of teeth were merging type, 40.9% were symmetrical type, and 14.8% were asymmetrical type. Statistical analysis revealed a significant correlation between the PCF types and the root canal configurations (p < 0.001). The dominant root canal types for teeth with C-shaped PCFs were merging and symmetrical types, while the asymmetrical type was not identified in non-C-shaped PCFs. In addition, significant morphological association between the root canals and radicular grooves was also revealed (p < 0.001). Teeth with different PCF morphologies exhibit specific patterns of root canal category distribution. Understanding the morphological nuances of the root canal based on the PCF can assist clinicians in predicting and identifying the canal configuration beneath the visible orifice.

The Assessment of C-shaped Canal Prevalence in Mandibular Second Molars Using Endodontic Microscopy and Cone Beam Computed Tomography: An In Vivo Investigation

Background Understanding root canal anatomy variations, particularly C-shaped canals, is crucial for successful endodontic treatment. This study used clinical and radiographic methods to assess the prevalence and characteristics of C-shaped canals in mandibular second molars in Western Maharashtra. Materials and methods This prospective study was conducted in the western region of Maharashtra, India. The samples included patients requiring endodontic treatment for mandibular second molars. Clinical evaluation was conducted using a surgical endodontic microscope and cone beam computed tomography (CBCT) imaging. Inclusion and exclusion criteria ensured the selection of a focused and homogeneous sample. Data analysis included assessment of unilateral/bilateral occurrence, canal distribution, and cross-sectional characteristics. Results Out of 200 mandibular second molars, 7.5% exhibited C-shaped root canals, with no significant gender differences. Canal distribution varied across coronal, middle, and apical levels, with prevalent configurations being C1, C2, C3, and C4. No significant differences were observed in canal distribution based on root levels. No significant gender differences were found in the presence of grooves on the root surfaces. Conclusion This study provides valuable insights into the prevalence and characteristics of C-shaped canals in mandibular second molars in Western Maharashtra. Further research into histological and genetic aspects can enhance our understanding, leading to improved treatment strategies for complex root canal anatomy variations.

Prevalence and anatomic associations of middle mesial canals and isthmi in mandibular first molars: A CBCT-based study in a Northern Chinese population

This study investigated the prevalence of the middle mesial canal (MMC) and isthmus in a northern Chinese subpopulation using cone-beam computed tomography (CBCT). CBCT images of 1060 mandibular first molars (MFMs) were analysed. Data analysis was performed using the chi-square test, t-test, and multiple logistic regression analysis (p < 0.05). The prevalence of MMC and isthmus was 15.2% and 40.6%, respectively. The average dentinal thickness in the danger zone was 1.61 ± 0.14 mm. Patients younger than 40 years were two times more likely to have MMC (odds ratio [OR] = 2.204). Additionally, for every 1 mm reduction in the MB-ML orifice distance, the likelihood of detection of MMC in MFM nearly doubled (OR = 1.738). Furthermore, MFMs with MB-ML isthmus were five times more likely to exhibit MMC than those without it (OR = 4.756). The findings revealed that the prevalence of MMC and isthmus in MFMs is high and suggested that anatomical and demographic variables can serve as valuable indicators for clinicians in anticipating their presence.

Morphological Variation of Mandibular Molars in Rohilkhand Population: An Original Research

Introduction

In-depth knowledge of common and aberrant pulp morphology is essential for appropriate diagnosis and treatment planning before commencing root canal treatment. The radicular morphology of mandibular molars has been extensively studied. Considerable variation in the number of canals and roots found in these teeth has been reported.

Aim

The purpose of this study is to investigate the root canal morphology of the mandibular molars among the Rohilkhand population using Dentascan.

Materials and Methods

Dentascan images of mandibular molar were taken from 99 extracted teeth that were collected from the Department of Oral Surgery and Maxillofacial Surgery, Institute of Dental Sciences, Bareilly, and private clinics. The examination of root canal systems of the teeth was based on Vertucci's classification.

Results

The mandibular molar (n = 99) were taken. Out of the 99 teeth examined, three canals were seen in 60 (60.6%) teeth, four canals in 39 (39.4%) teeth, 3% had extra distal roots, and 6% with C-shaped canals.

Conclusion

Among mandibular first molars, only 3% had three roots. Mesial roots of the first molar typically present with two canals and two apical foramina with type IV or II canal configuration. Most distal roots of the first molar presented with a type I canal configuration. The remainder were distributed mainly between types II, IV, III, and V. Among 99 mandibular molars, 6% had single C-shaped roots.

A Cone Beam Computed Tomography-Based Investigation of the Frequency and Pattern of Radix Entomolaris in the Saudi Arabian Population

Background and Objectives: An understanding of the anatomical complexity of teeth is a significant factor for a successful endodontic treatment outcome. The aim of this study was to explore the frequency and pattern of distribution of radix entomolaris (RE) in mandibular first molars (MFMs) of a Saudi Arabian subpopulation using CBCT scans. Materials and Methods: This study was conducted at dental clinics of Qassim University from February to May 2023 by evaluating CBCT scans that were previously obtained for diagnostic purposes. Scans of Saudi national patients with bilaterally present MFMs and fully formed root apices were included. Conversely, scans with one/or two missing MFMs, MFMs with incomplete root apices, full- or partial-coverage prosthesis, endodontic treatment, and associated radicular resorption were excluded from study. A total of 303 CBCT scans with 606 bilateral MFMs were analyzed by two calibrated evaluators for the presence of, and type according to Song's typolgy of RE. The data were analyzed using SPPS-24. The descriptive variables were documented as frequencies and percentages. The chi-square test was used to determine the association between the prevalence of RE with the gender, jaw side and age group. Both inter-rater and intra-rater agreements were estimated for detecting and classifying RE using Cohen's kappa test. Results: The sample had 63.7% males and 36.3% females. The prevalence of RE was 6.6%, with Song's type III (57.5%) as the most common variant. Absolute agreement was noted between the raters about the presence of RE and very strong agreement was noted for the classification of the RE. Conclusions: RE is an uncommon finding among the mandibular first molars of the Saudi population without any gender and quadrant predilection. The clinicians' knowledge of the presence and Song's type of RE may contribute towards the enhancement of endodontic treatment outcomes.

Prevalence of C-shaped canals and three-rooted mandibular molars in the Iranian population by using cone-beam computed tomography

OBJECTIVES

This study aimed to evaluate the prevalence of C-shaped canals and three-rooted mandibular molars in the Iranian population using cone-beam computed tomography (CBCT).

MATERIALS AND METHODS

This study evaluated mandibular teeth on 292 CBCT scans of patients referred to the Department of Radiology, Faculty of Dentistry, Islamic Azad University, Isfahan, Iran. All CBCT scans were obtained with the same three-dimensional CBCT scanner, and sections were reconstructed in all three planes (sagittal, axial, and coronal) with 1 mm slice thickness. A total of 291,402, and 200 first, second, and third molars, respectively, were evaluated. Data were analyzed using SPSS software (version 26.0).

RESULTS

Of 291 mandibular first molars, 0.7% were single-rooted, 96.6% were two-rooted, and 2.7% were three-rooted. The prevalence of C-shaped canals was 1.7% in mandibular first molars. Of 402 mandibular second molars, 8.5% were single-rooted, 90.5% were two-rooted, and 1% were three-rooted. The prevalence of C-shaped canals was 2% in mandibular second molars. Of 200 mandibular third molars, 21.5% were single-rooted, 77.5% were two-rooted, and 1% were three-rooted. The prevalence of C-shaped canals was 2% in mandibular third molars.

CONCLUSION

In the present study, the majority of mandibular molars were two-rooted, and three-rooted mandibular molars were less common. The third and second mandibular molars both had an increased prevalence of C-shaped canals. Mandibular first molars had the highest prevalence of three-rooted molars.

Investigation of mandibular second molar root and canal morphology in a Black South African population using cone-beam computed tomography and two classification systems

PURPOSE

To investigate the root and canal morphology of mandibular second molars, including anatomical variations, in a Black South African population using two classification systems.

METHODS

Cone-beam computed tomography images of 386 teeth were evaluated. The number of roots and canal configurations were categorized using the classifications of Vertucci (with modifications by Sert and Bayirli) and Ahmed et al. (including the modified Melton classification). Relationships between variables were assessed using Fisher's exact test (P < 0.05).

RESULTS

Mandibular second molars were predominantly two-rooted (91.7%). The majority of teeth had three canals including Type IV mesial (41.2%) and Type I (75.1%) distal (Ahmed et al. configuration: 2MDM M2 D1). Three or more canals were present in almost one-fifth of mesial (n = 72/386, 18.6%) and a small number of distal (n = 21/386, 5.4%) roots. Males displayed additional canals more frequently in the distal root (P = 0.02). C-shaped anatomy was found in 5.7%. Among the C-shapes, the most common was Melton's Type III in the coronal (50%), middle (81%) and apical (72%) thirds.

CONCLUSION

In this population, mandibular second molar teeth exhibited diverse morphology, which would have clinical significance for endodontic practitioners. The Ahmed et al. classification provided a better description than the Vertucci classification.

Evaluation of root and canal morphology of mandibular premolar amongst Saudi subpopulation using the new system of classification: a CBCT study

BACKGROUND

The clinician should have complete knowledge of the normal anatomy of the root as well as complexities in the root canal configuration for a better outcome, as missed or improper handling of the canal system can lead to the failure of an entire endodontic procedure. The present study aims to assess the morphology of roots and canals in permanent mandibular premolars in the Saudi subpopulation with a new classification system.

METHODS

The present study includes 1230 mandibular premolars (645 first premolars and 585-second premolars) from 500 CBCT images of the patients, including retrospective data. iCAT scanner system (Imaging Sciences International, Hatfield, PA, USA) was used to obtain the images; scanning of 8 × 8 cm images was performed at 120 KVp and 5-7 mA with a voxel size of 0.2 mm. The new method of classification presented by Ahmed et al. 2017 was used to record and classify the root canal morphology, followed by recording the differences regarding the age and gender of the patients. Comparison of canal morphology in lower permanent premolars and its association with gender and age of the patients was done by Chi-square test/ Fisher exact test; the significance level was set at 5% (p ≤ 0.05).

RESULTS

The left mandibular 1st and 2nd premolars with one root were 47.31%, with two roots were 2.19%. However, three roots (0.24%) and C-shaped canals (0.24%) were reported only in the left mandibular 2nd premolar. The right mandibular 1st and 2nd premolars with one root were 47.56%, with two roots were 2.03%. The overall percentage of the number of roots and canals in the first and second premolars ¹ PM ¹ (88.38%), ² PM ¹ B ¹ L ¹ (3.5%), ² PM B ¹ L ¹ (0.65%), ¹ PM ^1-2-1 (3.08%), ¹ PM ^1-2 (3.17%), ¹ PM ^1-2-1-2 (0.24%), ³ PMMB ¹ DB ¹ L¹ (0.48%). However, the C-shaped canals (0.40%) were reported in right and left mandibular second premolars. No statistically significant difference was reported between mandibular premolars and gender. A statistically significant difference was reported between mandibular premolars and the age of the study subjects.

CONCLUSION

Type I (¹ TN ¹) was the major root canal configuration in permanent mandibular premolars, which was higher among males. The CBCT imaging provides thorough details about the root canal morphology of lower premolars. These findings could support diagnosis, decision-making, and root canal treatment, for dental professionals.

Root and canal morphology of third molar teeth

Restorative and prosthetic considerations usually necessitates endodontic treatment of third molars in order to retain them as a functional component of the dental arch. However, the anatomy of third molars has been described as unpredictable. To date, there has been little published work on root and canal morphology of third molars, with an adequate sample size. The aim of this study was to investigate root and canal morphology of third molars. Maxillary and mandibular third molars were gathered from dental surgeries within north Jordan. Following access cavity preparation, pulp tissue was removed and root canals stained. Teeth were subject to examination after rendering them clear by immersion in methyl salicylate, and the following features evaluated: (1) number of roots; (2) number and type of root canals; (3) number and position of lateral canals; and (4) presence of inter-canal communications. Out of the examined 592 maxillary third molars, 69.9% had three roots, 10.81% had one, 9.79% had two, 9.12% had four, and 0.34% had five roots. Most had three (52.36%) and four canals (28.2%) with less frequency of two (11.48%), one (5.91%) and five canals (2.03%). Of the 639 mandibular third molars, 89.76% had two roots, 7.35% had three, 2.5% had one, and 0.47% had four roots. Most had three (55.71%) and two canals (29.42%) with less frequency of four (13.61%), one (1.09%) and five canals (0.15%). The majority of maxillary third molars had 3 roots, while the majority of mandibular third molars had two. Overall, nearly half of the maxillary and mandibular third molars had three canals. New canal configurations, not previously described in the literature nor included in Vertucci's classifications, were identified in both maxillary and mandibular third molars.

Root and canal morphology of mandibular second molars in an Egyptian subpopulation: a cone-beam computed tomography study

BACKGROUND

This study was using Cone beam computed tomography (CBCT) to examine the anatomical variations in mandibular second molars in an Egyptian sub-population.

METHODS

A total of 350 CBCT images (215 females and 135 males, aged 15-65 years) of mandibular second molars were evaluated. Samples were evaluated in terms of: number of roots, number of root canals, roots' cross section as well as prevalence and configurations of C-shaped canals. Statistical analysis was done to highlight differences between different categories and their prevalence among genders (significance level was set at p < 0.05). Data were presented as frequency and percentage values and were analyzed using chi square test followed by pairwise comparisons utilizing multiple Fisher's exact tests with Bonferroni correction. The significance level was set at p < 0.05 within all tests.

RESULTS

Of the 350 mandibular second molars evaluated, 87.2% were non-C-shaped while 12.8% were C-shaped with no gender-based statistically significant differences (χ2 = 0.19, p = 0.656). Most samples had three root canals (80%) followed by two (16%), then one (3.2%), and finally four (0.8%) root canals. Among the non-C-shaped molars, presence of two roots was most common (83.4%) followed by presence of a single root (16.2%), and only one sample (0.2%) had three roots, and this had no correlation with gender (χ2 = 1.86, p = 0.431). In the mesial roots Type IV Vertucci was the most common configuration found (68.8%), while Type I was the most prevalent in the distal roots (91.8%). The long oval configuration was the most commonly found cross section in mesial roots while "oval" was the most prevalent in distal roots.

CONCLUSION

Egyptian sub-population shows highly variable morphological features in mandibular second molars, hence, CBCT is highly recommended on case-to-case conditions.

Radix molaris is a hidden truth of mandibular first permanent molars: A descriptive- analytic study using cone beam computed tomography

BACKGROUND

Cone-beam computed tomography (CBCT) could be more beneficial in clinical situations that involve the determination of root canal morphology.

AIM

The aim of the study was to ascertain the prevalence of radix molaris (paramolaris-RP and entomolaris-RE) in a subpopulation of Saudi Arabia using CBCT.

METHOD

A total of 700 CBCT scans of mandibular permanent first molars were included in this study. All CBCT scans were interpreted by two trained dentists and an endodontist. Mandibular permanent first molars with fully developed roots and closed apices were only included. Computed Tomography scans were obtained from the dental college record. The anatomic characteristics which were checked included: the prevalence of radix molaris in both RE and RP and the prevalence of radix molaris according to the patient's gender and age. All CBCT images were processed and reconstructed using OnDemand3DTM imaging software.

RESULTS

Of the 700 patients included, 651 (93.0%) did not have radix molaris, 46 (6.6%) had radix entomolaris and 3 (0.4%) had radix paramolaris in the study group. There was no statistically significant difference between the genders and age in the incidence of RE and RP (P-value < 0.05).

CONCLUSION

The study showed that RE prevalence is more compared to RP in the first lower molars in the population studied. It is important to identify extra roots and associated canals to perform successful root canal treatment and avoid failure.

The morphology of the pulp chamber floor of permanent mandibular first and second molars in an Indian subpopulation-a descriptive cross-sectional study employing Pawar and Singh classification

Background

Mandibular molars are multi-rooted teeth with a complex and strenuous root canal anatomy. Because there is relatively negligible literature describing the pulp chamber floor anatomy, predicting the exact anatomical layout and its variations is daunting. A thorough comprehension and knowledge of the same is required for efficacious endodontic treatment consequence. The purpose of this study was to characterise and ascertain the pulp chamber floor anatomy of permanent mandibular first (ManFMs) and second (ManSMs) molars in an Indian population.

Methods

On 2,134 extracted human mandibular first (ManFMs = 1,067) and second molars (ManSMs = 1,067), a descriptive cross-sectional investigation was executed. Cleaning and removal of hard and soft tissue debris were performed, followed by flattening the anatomical crown until the pupal architecture was uncovered. A stereomicroscope with a magnification of 4.5 magnification was used to investigate the pulpal anatomy. Statistical analysis was carried out using chi square test, with 95% confidence intervals and a p value of 0.05 considered statistically significant.

Results

The majority of the ManFMs showed presence of three canal orifices in 57.73%, followed by four orifices 31.31%, five orifices 8.81%, and six orifices 2.15%. For ManSMs, majorly three orifices were found in 39.83% specimens, followed by two orifices in 37.39%, four orifices in 16.31%, and single root canal orifice was observed in 6.47%. The mesio-buccal, mesio-lingual, disto-buccal, disto-lingual canal orifices exhibited round and oval shapes in both ManFMs and ManSMs. The shape was predominantly oval with a single distal canal orifice (84.25% ManFMs and 74.16% ManSMs). In ManSMs, among the single root canal orifice, 66.66% were round in shape and 33.34% were C-shaped. In ManSMs with two root canal orifices, mesially 79.44% exhibited oval and 20.56% round shape. Distally, 74.16% were oval and 25.84% were round. The shapes of the access cavities for ManFMs were rectangular in 46.67% and triangular in 53.33%. For the ManSMs, the access cavities were triangular in 39.83%, rectangular in 16.31% and non-classified (others) in 43.86% of specimen. In both ManFMs and ManSMs, the pulp chamber floor morphology was predominately Y shaped (57.73% and 39.83%) according to the Pawar and Singh classification© of pulp chamber floor anatomy.

Conclusion

Our study indicated that the orifices on the pulp chamber floor are arranged in a typical manner, supporting the proposed categorization. Furthermore, description of the anatomical patterns of the pulp chamber guides the clinicians in chair-side treatment decisions.

Endodontic treatment of the mandibular first molar with six root canals: A case report and literature review

The mandibular first molars normally have three or four root canals and rarely have five or more root canals. The present study reported a rare anatomical configuration with six root canals in the mandibular right first molar diagnosed during endodontic treatment using a dental operating microscope and confirmed with the help of cone-beam computed tomography (CBCT) images. The present case report revealed that there is an increasing possibility of detecting additional canals through the magnification of the microscope and the improvement of CBCT diagnostic technology. As more abnormal morphologies in root canals are reported, dentists need to understand this diversity in anatomical structure and improve treatment techniques.

Comprehensive evaluation of root and root canal morphology of mandibular second molars in a Saudi subpopulation evaluated by cone-beam computed tomography

BACKGROUND

The study's goal was to use Cone Beam Computed Tomography (CBCT) to assess the root and root canal anatomy of mandibular second molars with C-shaped root canal configurations in residents of the Hail district. The impact of gender and side on the frequency of root canal morphology was considered.

METHODS

The sample size for this study was 304 untreated mandibular second molars with completely developed roots on the right and left sides. Using CBCT on the teeth, the root form and canal morphology for each root are based on Vertucci's classification. The occurrence of canals in the shape of a C. The prevalence and resemblance of the left and right sides or men and females were investigated. The Chi-square test was performed to evaluate the findings.

RESULTS

Of the 304 mandibular second molars studied, 286 teeth had two roots (94.1%), whilst 13 (4.3%) were C-shaped root canal systems. 77 molars (25.3%) had two canal orifices, 219 (72.0%) had three canal orifices, and six (2.0%) and one (0.3%) had four and five root canal orifices, respectively. Type IV was the most common for mesial root, accounting for 57.7% of the sample (n = 176). For distal root, the most common occurrence was type I, which occurred 282 times (96.60%). The most prevalent root canal morphology was the presence of two canals in the mesial root and one canal in the distal root of teeth with two distinct roots (variant 3). (69.4%). The overall prevalence of C-shaped root canal systems is (4.3%) (n = 13).

CONCLUSIONS

The patient's race is an undeniable factor that influences root canal anatomy. The root canal morphology of mandibular second molars revealed significant differences between Saudi subpopulations. The majority of mandibular second molars had two roots and three root canals. When treating these molars, the presence of a C-shaped root canal system must be taken into account.

Observation of mandibular second molar roots and root canal morphology using dental cone-beam computed tomography

The mandibular second molars show various morphological features in the roots and root canal, and a gutter-shaped root (GSR) caused by fusion of the mesial and distal roots is frequently encountered. In this study the number of the roots associated with mandibular second molars were observed using dental cone-beam computed tomography (CBCT). For those with a GSR, determination of root morphology and root canal classification were performed. CBCT image data from 173 Japanese mandibular second molars were obtained. Using sliced images, the number of the roots and root morphology were determined. In cases with a GSR, the ratio for the fused roots was determined and root canal morphology features were classified. A GSR was found in 61 (35.3%), with greater prevalence in females. In addition, the overall ratio of the fused part to root thickness in those with a GSR was 48.7%, with no significant difference related to sex. Furthermore, a C-shaped root canal morphology was commonly observed in both males and females with a GSR. In the present cohort examined in Japanese, most of the mandibular second molar were found to have two roots, with a GSR noted in 35.5%. While a GSR was more often observed in females, a C-shaped root canal was the most common root canal morphology in both sexs. It is considered that assessment using CBCT findings is helpful for precise determination of root canal morphology and presence of a GSR in mandibular second molars.

Radiographic Investigation of Root Canal Morphology of Permanent Mandibular Molars in Makkah Population (Saudi Arabia) Using Cone-Beam Computed Tomography

Objectives

This study aimed to analyze the root canal morphology of first and second permanent mandibular molars among Makkah population by using cone-beam computed tomography (CBCT).

Materials and Methods

CBCT images of two hundred eight patients were obtained from the Faculty of Dentistry, Umm Al-Qura University, Makkah, Saudi Arabia. In all images, mandibular first and second molars were evaluated for the number of roots and their morphology, number of root canals, canal configuration in each root according to Vertucci's classification, and the presence of a C-shaped canal.

Results

Most of the mandibular first molars had two roots (96.5%) and three root canals (77.7%). Type IV canal configuration prevailed (75.6%) in the mesial roots, and type I canal configuration prevailed (71.7%) in the distal roots. For the mandibular second molars, the majority had two roots (96.3%) and three root canals (82.7%). Type IV canal configuration prevailed (48%) in the mesial roots and type I (99.1%) in the distal roots. C-shaped canals were detected in 5.7% of the mandibular first molars and 4% of the mandibular second molars. There was no statistical difference between the mandibular first and second molars (P > 0.05) in the shape of the roots and the presence of the C-shaped canals.

Conclusion

Most of the mandibular molars in Makkah population presented with two roots and three root canals. The incidence of three-rooted mandibular molars was low, and it was higher in the first molars than second molars. The type IV root canal system prevailed in mesial roots and type I in distal roots.

Root and canal morphology of the maxillary second premolars as indicated by cone beam computed tomography

The aim was to evaluate the morphology of maxillary second premolars. The root canal configurations were classified according to Vertucci and a new system by Ahmed et al. based on CBCT images. In addition, the number of roots and the level where they bifurcated were identified, and morphological measurements were performed based on anatomical landmarks. Single-rooted forms were most common. Bifurcation occurred most often in the middle part of the root. The most common canal configuration was type I according to Vertucci and code ¹ SP¹ according to the new classification. The measurements showing the results were as follows (mm): palatal cusp/buccal cusp/the lowest point of the occlusal surface to pulp chamber ceiling 6.18/6.54/4.77; the ceiling of the pulp chamber was found at the CEJ in 92.28% of the specimens. The maxillary second premolars tended to be single-rooted and with one root canal.

The C-shaped Canal System in Mandibular Molars of a Saudi Arabian Population: Prevalence and Root Canal Configurations Using Cone-Beam Computed Tomography

OBJECTIVES

This retrospective study aimed to assess the prevalence of the C-shaped canal system in mandibular first and second molars in a Saudi Arabian population using cone-beam computed tomography (CBCT).

MATERIALS AND METHODS

The sample included 300 CBCT images from adults aged 18 to 80 years (38.7 ± 17.9) (150 females and 150 males). All images were analyzed to detect the C-shaped root canal according to Fan's criteria. We also categorized our findings according to the gender and direction of the longitudinal groove. Data were reported as frequencies and percentages. The Chi-squared test was used to analyze proportional differences, with the significance level set at ≤0.05.

RESULTS

The C-shaped canals were observed in 146 mandibular first molars (24.33%) and 182 second molars (30.33%). Male patients had a significantly higher prevalence of C-shaped canals in mandibular second molars than females (P=0.003). The longitudinal groove was most typically detected on the root's lingual surface (53.35%).

CONCLUSION

The incidence of the C-shaped canal in a Saudi Arabian population was 27.33% in the mandibular molars. The longitudinal groove was mostly on the lingual surface. Males showed a higher prevalence of the C-shaped canal than females.

Root and Root Canal Configuration Characterization Using Microcomputed Tomography: A Systematic Review

This systematic review’s objective was to conduct a complete analysis of the literature on the root canal morphology using advanced micro-computed tomography. The electronic web databases PubMed, Scopus, and Cochrane were examined for research papers concerning the chosen keywords, evaluating the root canal morphology using Micro-CT, published up to 2021. The articles were searched using MeSH keywords and searched digitally on four specialty journal websites. DARE2 extended (Database of Attributes of Reviews of Effects) was used to assess bias risk. The information was gathered from 18 published studies that strictly met the criteria for inclusion. In the included studies, a total of 6696 samples were studied. The studies were conducted on either maxillary (n-2222) or mandibular teeth (n-3760), permanent anteriors (n-625), and Third molars (n-89). To scan samples, a Scanco Medical machine in was used in 10 studies, Bruker Micro-CT in 34, and seven other machines were utilized in the rest. Bruker Micro-CT software from Kontich, Belgium, VG-Studio Max 2.2 software from Volume Graphics, Heidelberg, Germany, was the most commonly used software. The minimum Voxel size (resolution) adopted in the included studies was 11.6 µm. However, 60 µm was the maximum. Most studies classified the root canal morphology using Vertucci’s classification system (n-16) and the four-digit system (n-6).

The C-shaped root canal systems in mandibular second molars in an Emirati population

Our study aimed to describe the root and canal morphology of mandibular second molars in Emirati population and to study the prevalence and types of morphological change in C-shaped canal configuration along the root length in an effort to describe C-shaped molars as a unit. Cone beam computed tomography (CBCT) scans of Emirati patients were analyzed in multiple plans and root and canal configuration of mandibular second molars were evaluated. Moreover, specific types of morphological change in C-shaped canal configuration along root length were studied and reconstructed using 3D reconstruction software. A total of 508 mandibular second molars were evaluated. Among the non-C-shaped mandibular second molars, two separate roots were the most prevalent root morphology (78.3%). The mesial root's most common root canal configuration was Vertucci Type II (46.5%), and in the distal root, Vertucci Type I (90.5%). The prevalence of C-shaped mandibular second molars was 17.9% and was significantly prevalent (P < 0.001) in females. Specific types of morphological change in C-shaped molars along the root length were observed and described for the first time, in which the most common types of morphological change were C1-C2-C3d (18%), C1-C3c-C3d (15.4%), C4-C3c-C3d (7.7%), and C3c-C3c-C3d (7.7%). This study showed wide variations in the root and canal morphology in mandibular second molars in Emirati population with a relatively high prevalence of C-shaped canal configuration (17.9%). Moreover, specific types of morphological change in C-shaped configuration were detected and described for the first time in this population.

Prevalence of radix entomolaris in India and its comparison with rest of world- a systemic review and meta analysis

INTRODUCTION

A successful endodontic treatment can be achieved by proper cleaning, shaping and disinfection and obturation of the root canal system. Mandibular molars requiring endodontic therapy have several variations. A mandibular molar usually has two roots but occasionally, it might have additional roots also. The purpose of this article is to determine the regional predilection of Radix Entomolaris in permanent mandibular first molar in India and its comparison to rest of world.

EVIDENCE ACQUISITION

A search was undertaken to identify published research articles related to radix entomolaris in mandibular first molars. Sixty four research articles were analyzed.

EVIDENCE SYNTHESIS

Articles were assessed in relation to demographic location of radix entomolaris. Also the type of study and the analytic tool employed for its assessment was evaluated. Results were tabulated and statistically analyzed. Statistical test revealed a significant variation between the India and rest of world.

CONCLUSIONS

This research reported that regional predilection of radix entomolaris in mandibular first molar varies significantly. In India the highest incidence of radix entomolaris was observed in north India with 24%, whereas in world China reported the highest prevalence of 32% and the minimum was observed in Africa at 0%. India relied on conventional radiography for its diagnosis whereas rest of the world primarily utilized in vitro studies and advanced radiography for its diagnosis.

Assessment of root morphology and canal configuration of maxillary premolars in a Saudi subpopulation: a cone-beam computed tomographic study

BACKGROUND

The objective of this study was to use CBCT to look into the root canal morphology of maxillary premolars in a Saudi Arabian subpopulation and associate the results to existing canal morphology classifications.

METHODS

The sample size for this analysis was 500 right and left untreated maxillary first and second premolars with fully formed roots from 250 Saudi residents (125 male and 125 female). The following observations were made using CBCT on the teeth related: (1) The number and morphology of roots; (2) The canal morphology for each root according to Vertucci's classification. The frequency and similarities between the right and left sides, as well as between females and males, were studied. The Chi-square test was used to assess the results.

RESULTS

Of the 500 maxillary first premolars studied, 199 teeth had one root (39.8%), whilst 293 (58.6%) were two-rooted. Three-rooted maxillary first premolars were found in 8 (1.6%). For maxillary second premolars, 416 premolars had one root (83.2%), whilst 79 (15.8%) had two roots and the rest 5 (1.0%) were three roots. There were significant differences of number of root were found between groups (p > 0.05). For maxillary first premolar, Type IV was the most frequent, accounting for 57.8% of the sample (n = 289), followed by type II (32.8%, n = 164). For maxillary second premolar, Type I was mainly occurrence 302 (60.4%), followed by Type II (16.4%, n = 82).

CONCLUSIONS

The majority of maxillary first premolars had two roots and two root canals, while one root and one root canal was the most common anatomical configuration for maxillary second premolars. Additional canal forms do occur on occasion, and clinicians should pay close attention to them.

Prevalence of Missed Canals and Their Association with Apical Periodontitis in Posterior Endodontically Treated Teeth: A CBCT Study

Background

This study aimed to assess the prevalence of missed canals in endodontically treated teeth and their association with apical periodontitis in a Saudi Arabian population using CBCT.

Materials and Methods

A total of 208 CBCT radiographs were investigated. For each tooth, radiographs of axial, coronal, and sagittal segments were acquired to appraise the external as well as the internal structure of the root canal system and apical area. In root canal-treated teeth, unfilled canals appearing from the cementoenamel junction to the apex were defined as missed untreated canals; and a periapical lesion was considered when disruption of the lamina dura was detected, and the low-density area associated with the radiographic apex was at least twice the width of the periodontal ligament space. The data were presented as frequencies and percentages. The Z-test was used to analyze the differences in proportions with the significance level set at P value <0.05.

Results

The overall prevalence of missed canals among endodontically treated teeth was 18%. The prevalence of missed canals was higher in maxillary first molars with 40.6%. The overall prevalence of apical periodontitis among teeth with missed canals was 90%. It was 84.2% in the maxilla and 100% in the mandible. The second mesiobuccal canal in the maxillary first molars and mesiobuccal and distobuccal canals in mandibular teeth were the most missed canals.

Conclusion

Apical periodontitis in root canal-treated teeth with missed canals was high (90%), with most identified missed canals in maxillary and mandibular first molars.

Management of Intracanal Separated File Fragment in a Four-Rooted Mandibular Third Molar

The success of endodontic therapy is attributed to complete arbitration of the bound entities concealed within the complexity and absolute disinfection of the root canal system, thus, deeming it mandatory to effectively negotiate and overcome the challenges posed by obstruction, either iatrogenic or anatomic. To achieve this, considerable depth of knowledge and expertise with reference to variations in root canal morphology and clinical mishap management is substantially as important as developing fine observation skills in conjunction with an appropriate armamentarium and a keen sense of determination, thereby enhancing one's clinical acumen by several folds. In the present case, following rubber dam isolation, the temporary restoration was removed, and the remaining carious dentin was excavated. Endodontic access cavity was refined and explored with a DG-16 probe, following which three separate canal orifices were identified in the pulp chamber floor (mesiobuccal, mesiolingual, and distal). On further observation under a surgical operating microscope and continuous exploration with the DG-16 probe, a fourth canal was found in the mesial aspect of the tooth (middle mesial). With instrumentation, it was confirmed that a fractured object was indeed present at the apical third of the mesiolingual root of tooth 38. Bypassing of the fractured fragment was initiated with a size 10 SS K-file coupled with copious irrigation with 3% sodium hypochlorite. In the present case report, four distinct canals comprising 3 mesial and 1 distal canal were recognized, and the fractured instrument in one of the canals was bypassed successfully.

Morphometric Analysis Comparing Human Mandibular Deciduous Molars using Cone Beam Computed Tomography

Background

The presence of variations in crown and root measurements in deciduous teeth usually leads to complications during and after treatment. Hence, in order to improve the success rate in pediatric treatment, there must be proper knowledge of dental morphological and morphometric characteristics of deciduous teeth among different populations.

Objective

The aim of the present study was to assess length of the crowns, length of the roots, roots to crown (R/C) ratio, and distance between the floor of pulp chamber to furcation using cone beam computed tomography (CBCT).

Materials and Methods

Extracted deciduous molar teeth were collected and divided into: group I: Deciduous mandibular first molars (lower D) (n = 16) and Group II: Deciduous mandibular second molars (lower E) (n = 21). The length of the crowns, length of the roots, R/C ratio and distance between the floor of pulp chamber and furcation were measured using CBCT. Data were statistically analyzed.

Results

Lower D showed smaller crown length with a mean of 4.87 mm, longer mesial root length with a mean of 9.68 mm and greater R/C ratio with a mean of 2 mm when compared to lower E. As for the distal root length and the distance between the floor of the pulp chamber and the furcation area, both molars closely resembled each other. There was a statistical significant difference between both molars regarding mesial root length, crown length, and R/C ratio.

Conclusion

The current study concluded that dental morphological characteristics are important in research as they provide valuable information about diversities within a population.

Evaluation of C-shaped canals in mandibular second molars of a selected patient group using cone beam computed tomography: prevalence, configuration and radicular groove types

The aim of the present study was to examine the prevalence, symmetry and configurations of C-shaped canals and radicular groove types in mandibular second molars according to age and sex in a Turkish sub-population using cone beam computed tomography (CBCT). In total, 674 CBCT images (368 females and 306 males, aged 18-76 years) of 1348 mandibular second molars were evaluated. The symmetry, configuration of C-shaped root canals, radicular groove types with age and sex were noted. One sample chi-square test and chi-square test were used to determine statistically significant differences. The statistical significance level was set at p < 0.05. Of the 1348 mandibular second molars evaluated, 10.7% had C-shaped root canals. C-shaped root canals appeared to be significantly more common in females than in males (p < 0.05). C1 (44.4%) was the most frequent configuration in the coronal third, and C2 (44.4%), and C4 (31.9%) were the most frequent configurations in middle and apical thirds, respectively. Type 2 (45.1%) was the most common radicular groove type (p < 0.05). The frequency of C-shaped root canals in mandibular second molars in a Turkish sub-population was considerably high (10.7%). CBCT can aid the detection of C-shaped canals and their configurations. Dentists should consider the possibility of C-shaped canals in root canal treatment of mandibular second molars, as these configurations have implications for biomechanical preparation and filling methods.

Root and Canal Morphology of Mandibular Second Molars in a Yemeni Population: A Cone-beam Computed Tomography

Objective:

This study aimed to identify and characterize root and canal morphology and the prevalence of C-shaped canals of mandibular second molars (MSMs) in a Yemeni population using cone-beam computed tomography (CBCT).

Methods:

Three-dimensional digital images of 500 MSMs with mature roots were taken from 250 Yemeni individuals and analyzed for the following features: number of roots, shape and type of roots, type of canal configuration in each root, prevalence of C-shaped canal, and primary variations in the morphology of root and canal systems. Chi square and Fisher’s exact tests were employed for statistical analysis.

Results:

89.6% of MSMs had two separate roots, 9% had two fused roots, 0.6% had three separate roots and 0.8% had one root. Mesial root was mostly ribbon-shaped (60.5%) and distal root was mostly kidney-shaped (50.7%). Type II and Type I canal configurations were the most frequent in mesial (56.9%) and distal (91.3%) roots, respectively. C-shaped canals were found in 9%. Six variants were found with variant 3 being the most common (71%).

Conclusion:

Yemeni MSMs are mainly two-rooted. The prevalence of three- and one-rooted MSMs was relatively low. Various canals configurations were found in MSMs among this sample of Yemeni population. The clinicians should consider C-shaped roots and canals when treating Yemeni MSMs and should be aware of their morphological variations to ensure successful root canal treatment. Although bilateral similarity of many anatomical features of MSMs was found, individual evaluation of each MSM is necessary while performing endodontic treatment on both sides.

Root anatomy and canal configuration of human permanent mandibular second molar: A systematic review

The objective of the study was to review the literature on root anatomy and canal configuration in permanent mandibular second molar based on Vertucci classification. Online electronic databases such as PubMed-Medline, Embase, Scopus, and Cochrane Library were searched using appropriate keywords from the earliest available date till 10^th February 2021 restriction on language. Additional sources such as Google Scholar, major journals, unpublished studies, conference proceedings, and cross-references were explored. Information curated for data extraction included methodology, population, sample size (number of teeth), number of root canals, and type of root canal configuration (RCC). Thirty-seven articles were selected with a total of 12,393 permanent mandibular second molar teeth. In the mesial root, Type IV canal configuration with 37.3% was more frequent, having two canals with 70.4%. In the distal roots, one canal was more prevalent with 77% occurrence, and Type I canal configuration was more frequent with 85.2%. Comprehensive knowledge of tooth anatomy and root canal morphology is crucial to root canal treatment. Therefore, an understanding of the canal configuration and anatomy is necessary for the dentist to enhance successful endodontic treatment. Our systematic review findings reveal a wide variety of possible canal configurations among permanent mandibular second molar, while the number of canals ranged from 1 to 5 in number. The evidence is intended to help dental practitioners to avoid mishaps such as perforation and missing canals and anticipation of potential complications during treatment.

Endodontic management of an atypical permanent mandibular second molar with one buccal and two lingual roots

This article describes an unusual location of the orifices and roots in a permanent mandibular second molar with symptomatic irreversible pulpitis and symptomatic apical periodontitis. During its micro-endodontic management, the cone-beam computed tomography evaluation revealed a rare variant of a three-rooted permanent mandibular second molar with four canals. The single buccal root had two canals with Vertucci's Type II pattern and a lingual root dividing into two with a single canal in each root, respectively. Interestingly, the concerned tooth had normal occlusal morphology and alignment in the arch. A follow-up of 9 months after the completion of endodontic therapy exhibited satisfactory clinical and radiographic findings.

Classification and morphology of middle mesial canals of mandibular first molars in a southern Chinese subpopulation: a cone-beam computed tomographic study

Background

Cone-beam computed tomography (CBCT) was employed to study the morphology and curvature of middle mesial canals (MMCs) of mandibular first molars (MFMs).

Methods

CBCT scanning was performed on MFMs of 1100 patients. Patients' images that met the inclusion criteria were divided into group A (< 40 years old) and group B (≥ 40 years old) for further study. The images were used to study the incidence of MMCs at different ages, measure the curvature of MMCs in the mesiodistal and buccolingual directions using the Schneider method, and observe the anatomical morphology of the mesial root canal system. All statistical analyses were performed by using SPSS 21.0 software. Quantitative data were presented as mean ± standard deviation. Student’s t-test was used to calculate the statistical significance. P < 0.05 was considered statistically significant.

Results

In 875 patients, 1750 MFM images met the inclusion criteria. Among these cases, 158 MFMs contained an MMC, yielding an incidence rate of 9.03%. The incidence rate of MMCs was 11.22% in group A and 6.61% in group B, and this difference was statistically significant (P < 0.05). The curvature in the mesiodistal direction was 29.39 ± 8.53° in group A and 26.06 ± 8.50° in group B, and this difference was also significant (P < 0.05). The curved regions in groups A and B were often located in the middle 1/3 of canal. No significant difference in the distance between MMC orifices and mesiobuccal canal orifices or mesiolingual canal orifices was noted (P > 0.05). The most common mesial root canal morphological type was type II (3-2) (53.80%).

Conclusion

The incidence of MMCs in MFMs declined as age increased. The canal systems of MMCs were varied and complex, mainly exhibiting an obvious mesiodistal curve. CBCT is an outstanding method to help guide root canal therapy.

*Yeqing Yang and Buling Wu have contribute equally to this article.

Prevalence of middle mesial canal and radix entomolaris of mandibular first permanent molars in a western Chinese population: an in vivo cone-beam computed tomographic study

Background

The aim of this study was to investigate the prevalence of the middle mesial canal (MMC) and radix entomolaris (RE) in mandibular first permanent molars in a western Chinese population using cone-beam computed tomography (CBCT).

Methods

A total of 1174 CBCT images of the mandibular first molars were collected from West China Hospital of Stomatology, Sichuan University. The following information was recorded and evaluated: the detection rate and location of the MMC and RE, the curvature of the RE, the canal configuration and bilateral symmetry.

Results

The detection rates of the MMC and RE were 3.41 and 25.04%, respectively, as calculated by individuals, and 1.79 and 22.15%, respectively, as calculated by total teeth. The average curvature in the buccolingual (BL) orientation (40.63 ± 14.39°) was significantly larger than that in the mesiodistal (MD) orientation (17.64 ± 7.82°) (p < 0.05). Of 587 patients, 71.72% (421/587) had bilateral symmetry according to the root canal morphology. The prevalence of three-rooted mandibular first molars was higher in males than in females, while the prevalence of two-rooted mandibular first molars was higher in females than in males.

Conclusions

Our results showed that the RE could be detected in almost 1/4 of the western Chinese population; thus, RE detection requires special attention and careful assessment in endodontic treatment.

A Rare Case of Single-Rooted Mandibular Second Molar with Single Canal

The root canal anatomy of mandibular second molar teeth is known to be highly variable. Whilst the most frequently seen configuration is two mesial canals and one distal canal, other variations such as four canals, two canals, and C-shaped canal system do also exist. This case report describes the diagnosis and management of unusual root canal configuration of a mandibular second molar, with one canal in a single conical root, using the contemporary advancements in endodontics. Following clinical and radiographic examinations of the case, a diagnosis of symptomatic irreversible pulpitis with symptomatic apical periodontitis of tooth #47 was established, and root canal treatment followed by composite buildup and crown were planned. Clinicians should be aware of the different anatomic variants each tooth may exhibit. Furthermore, clinicians need to possess the proper knowledge and skills that allow them to utilize the diagnostic and therapeutic tools available at their disposal in order to optimize the quality of care provided to their patients.

A mandibular second molar with a middle mesial root canal

The present case report describes the clinical detection and root canal management of a rare middle mesial canal of a Japanese mandibular second molar by troughing preparation using an operating microscope and cone-beam computed tomography.

Root and Canal Configuration of Mandibular First Molars in a Yemeni Population: A Cone-beam Computed Tomography

Objective:

To describe root and canal morphology of mandibular first molars (MFMs) in a Yemeni population using cone-beam computed tomography (CBCT).

Methods:

CBCT images of 500 right and left untreated MFMs with fully developed roots from 250 Yemenis (125 male and 125 female) comprised the sample size of this study. The following characteristics were recorded: (1) number of roots and their type and morphology, (2) number of canals orifices per root, (3) type of canal configuration and (4) primary variations in the morphology of the root and canal systems.

Results:

96.8% of MFMs are double-rooted. A third root was found in 3.2%, more in females than males. Mesial root was mainly ribbon-shaped (92.2%) and distal root was kidney-shaped in 56.2%. Two canals orifices were found in mesial root of 95.8% and one canal orifice was found in distal root of 96.4%. Vertucci type II canal configuration was the most frequent (57%), followed by type IV (35.6%) in mesial root. Type III canal configuration was the most prevalent (48.8%), followed by type I (41%) in distal root. Variant 3 represented the most common root and canal morphology (89.8%).

Conclusion:

MFMs in Yemeni population are mainly two-rooted with 3.2% having a supernumerary distolingual root. Cross section of mesial root was mainly ribbon-shaped and distal root was kidney-shaped. Vertucci type II and III configurations were the higher incidence in mesial and distal roots, respectively. The presence of two canals in mesial root and one canal in distal root of MFMs with two separate roots (variant 3) was the most common morphology.

Association between Endodontically Treated Maxillary and Mandibular Molars with Fused Roots and Periapical Lesions: A Cone-beam Computed Tomography Cross-sectional Study

INTRODUCTION

Fused root variations of the root canal system increase the complexity of the inner root canal system anatomy. The aim of the present study was to determine, in in vivo conditions, the proportion of periapical lesions in association with endodontically treated maxillary and mandibular molars with fused roots presenting previous root canal treatment by assessing preexisting data via cone-beam computed tomographic volumes.

METHODS

A total of 1160 CBCT scans with an overall sample of 20,836 teeth were screened. A global count of 3701 maxillary molars and mandibular second molars were included in the study. The Cohen kappa test and interclass correlation coefficient tested the intra- and interrater reliability, respectively. The percentage of periapical lesions associated with molars with or without root fusion was determined. Proportions were expressed with 95% confidence intervals (CIs). The z test for proportions was used to analyze differences between subgroups, and an odds ratio was calculated in order to understand the association between periapical lesions and root configuration.

RESULTS

Fused molars presented a prevalence of periapical lesions in endodontically treated teeth of 74.0% (95% CI, 65.2%-82.8%), whereas nonfused molars had a proportion of periapical lesions in root canal-treated teeth of 69.5% (95% CI, 65.2%-73.8%; P > .05). Endodontically treated molars with fused roots presented with 1.3 higher odds of being associated with periapical lesions than endodontically treated molars with nonfused roots.

CONCLUSIONS

A tendency of a higher proportion of periapical lesions was found in the fused rooted molars with a history of root canal treatment when compared with nonfused teeth; however, no statistically significant difference was noted.

Application of a new system for classifying root canal morphology in undergraduate teaching and clinical practice: a national survey in Malaysia

AIM

To evaluate and compare the feedback of final year undergraduate dental students in eight Malaysian dental schools on the application of a new system for classifying root canal morphology in teaching and clinical practice.

METHODS

One PowerPoint presentation describing two classification systems for root canal morphology (Oral Surgery Oral Medicine Oral Pathology, 1974 38, 456 and its supplemental configurations, International Endodontic Journal 2017, 50, 761) was delivered to final year undergraduate dental students in eight dental schools in Malaysia by two presenters (each presented to four schools). To examine students' feedback on the utility of each system, printed questionnaires consisting of six questions (five multiple choice questions and one open-ended question) were distributed and collected after the lecture. The questionnaire was designed to compare the classification systems in terms of accuracy, practicability, understanding of root canal morphology and recommendation for use in pre-clinical and clinical courses. The exact test was used for statistical analysis, with the level of significance set at 0.05 (P = 0.05).

RESULTS

A total of 382 (out of 447) students participated giving a response rate of 86%. More than 90% of students reported that the new system was more accurate and more practical compared with the Vertucci system (P < 0.001). Overall, 97% of students reported the new system helped their understanding of root and canal morphology compared with the Vertucci classification (P < 0.001). Over 97% of students recommended the use of the new system in teaching, pre-clinical courses and clinical practice (P < 0.001). Except for two schools, no significant difference was detected between the responses of students for all questions at the different schools (P > 0.05). The students' responses for all questions were almost similar for both presenters (P > 0.05).

CONCLUSIONS

The new system of International Endodontic Journal 2017, 50, 761 for classifying root and canal morphology was favoured by final year undergraduate dental students in Malaysia. The new system has the potential to be included in the undergraduate endodontic curriculum for teaching courses related to root and canal morphology.

Aesthetic management of a fractured mandibular central incisor with two canals using fibre post

Mandibular incisors show variations in their root canal anatomy from regular pattern in some cases. Magnification plays a vital role to identify those unusual canal morphologies. A certain modification in access cavity preparation is required to locate those extra canals. Not only the functional restoration but also aesthetic harmony should be restored while treating anterior teeth. In these cases, post space preparation should be done with extra care to prevent vertical root fracture. This case report illustrates the importance of proper radiograph and magnification in the successful identification and management of complex canal systems in mandibular incisors.

The prevalence of radix molaris in the mandibular first molars of a Saudi subpopulation based on cone-beam computed tomography

Objectives

The purpose of this study was to determine the incidence of radix molaris (RM) (entomolaris and paramolaris) in the mandibular first permanent molars of a sample Saudi Arabian subpopulation using cone-beam computed tomography (CBCT).

Materials and Methods

A total of 884 CBCT images of 427 male and 457 female Saudi citizens (age 16 to 70 years) were collected from the radiology department archives of 4 dental centers. A total of 450 CBCT images of 741 mature mandibular first molars that met the inclusion criteria were reviewed. The images were viewed at high resolution by 3 examiners and were analyzed with Planmeca Romexis software (version 5.2).

Results

Thirty-three (4.5%) mandibular first permanent molars had RM, mostly on the distal side. The incidence of radix entomolaris (EM) was 4.3%, while that of radix paramolaris was 0.3%. The RM roots had one canal and occurred more unilaterally. No significant difference in root configuration was found between males and females (p > 0.05). Types I and III EM root canal configurations were most common, while type B was the only RP configuration observed.

Conclusions

The incidence of RM in the mandibular first molars of this Saudi subpopulation was 4.5%. Identification of the supernumerary root can avoid missing the canal associated with the root during root canal treatment.

Prevalence of three-rooted mandibular permanent first and second molars in the Saudi population

Introduction

This study aims to explore the frequency and factors affecting the prevalence of an extra root in the lower first and second permanent molars in the Saudi population.

Methods

Images of 379 Saudi patients who underwent CBCT for routine dental treatment were assessed. The CBCT images were evaluated on a 34-inch LED screen in a dark room and assessed by two examiners to count the prevalence of an additional root in the lower molars. Laterality and the gender factors were used to analyze that prevalence. Percentages represent categorical variables; Fisher’s exact test and Chi square test were also used for the categorical variables.

Results

In the lower first molars, the prevalence of extra root in female patients was 5.7%, 3% in male patients and the overall prevalence was 3.05%; in lower second molars, the prevalence was 1.81% in female patients and 3.04% in male patients with an overall prevalence of 1.48%. A statistically significant difference was fond in the existence of an additional root with regard to laterality, to be more common on the right compared to the left side for both mandibular molars. The extra root prevalence was statistically significant in female patients at the first molar compared to male patients (p < 0.05).

Conclusion

The overall of extra roots prevalence in the lower first and second molars in the Saudi population are 3.05% and 1.48%, respectively. Consideration and identification of this variation is essential to ensure successful endodontic treatment.

Root and root canal diversity in human permanent maxillary first premolars and upper/lower first molars from a 14th-17th and 18th-19th century Radom population

OBJECTIVE

The aim of this study was to assess whether analyzed groups from two historical periods: Late Medieval (LMP), and Modern (MP) from Radom varied in the number of tooth roots and root canal system morphology.

METHODS

Root morphology of 229 permanent human teeth were analyzed using Cone Beam Computed Tomography. Additionally, the mitochondrial DNA (mtDNA) of 29 individuals from the LMP and 31 from the MP was analyzed.

RESULTS

In LMP, the maxillary first premolars were dominated by one root, while in MP second and third roots also appeared. Maxillary first molars in LMP presented three roots, while two-rooted forms occurred in MP. All mandibular first molars from the LMP and almost all (98%) from MP presented two roots. The greatest diversity in terms of root canal number occurred in one-rooted maxillary first premolars, the mesiobuccal root of the maxillary first molars, and the mesial and distal roots of the mandibular first molars in both groups. A few haplogroups from outside Europe (C, N, and R) were recorded in the MP Radom population. Moreover, this population had substantially higher haplogroup diversity compared with the LMP population.

CONCLUSION

Odontological research indicates an increase in the diversity in the number of roots and the shape of root canals in MP. This information corresponds to genetic research, which also indicates an increase in the diversity of haplogroups during the MP.

Cone Beam Computed Tomography Analysis of Root and Root Canal Morphology of First Permanent Lower Molars in a Middle East Subpopulation

Aim:

The aim of this study was to investigate variations in the number of roots and root canals in first permanent lower molars (FPLMs) using cone beam computed tomography (CBCT).

Materials and Methods:

A total of 640 CBCT images were analyzed using SIDEXIS XG software version 2.62 (Sirona Dental Systems, Bensheim, Germany). The entire root anatomy of FPLMs was investigated in three dimensions and the number of roots, root canals, and the number of canals per root were recorded. Statistical analysis was performed using the Statistical Package for the Social Sciences (SPSS) software, version 24, (IBM Corporation, USA) to determine the relationship between root anatomy and gender, age, or tooth location (right or left side).

Results:

The majority of FPLMs had two roots (96%), whereas the remaining 32 FPLMs (4%) had three roots. Almost two-thirds of the sample (62.7%) had three root canals, whereas only three cases (0.4%) of the FPLMs had six canals. When comparing bilateral differences in the distribution of root canals, it was determined that a quarter of FPLMs (24.1%) had an unequal number of canals. Moreover, there were differences in the number of additional canals between the mesial and distal roots with 17.5% of the former having three canals as compared with only 0.5% of the distal root. Interestingly, not more than one canal was observed in all additional root cases. No significant differences were observed in the number of canals between males and females or between right and left sides of the examined FPLMs (P > 0.05).

Conclusion:

Dental clinicians should be aware of the presence of an additional root in 4% of FPLMs, and about a quarter of the cases (27%) had an extra middle mesial canal in the mesial root, which was found to be more prevalent in middle age groups.

Prevalence of C-shaped mandibular molars in the Portuguese population evaluated by cone-beam computed tomography

Objective:

The purpose of this study was to evaluate the prevalence of first and second C-shaped mandibular molars in a Western European population of Portuguese Caucasians.

Materials and Methods:

Patients having both routine panoramic radiograph and presurgical cone-beam computed tomography (CBCT) exams were selected. The CBCT examination was performed at five different axial levels and the mandibular molars were classified as C-shape according to the Fan criteria. Differences between genders, age groups, left and right side, type of tooth, and root concavity side were determined. The molars were classified as nonfused roots (NFRI–II), FRI–III, or single root with single canal (SS) groups, using the panoramic radiograph. The prevalence of C-shaped anatomy was calculated to each group.

Results:

A total of 1783 teeth (695 first molars and 1088 second molars) from 792 patients were included in the study. The prevalence of C-shaped configurations was 0.6% and 8.5% to mandibular first and second molars, respectively. The differences between gender, teeth, and root concavity direction were considered statistically significant (P < 0.05). The FR had a significantly higher rate of C-shapes when compared to NFR (P < 0.05). Intrarater reliability was 93.6%.

Conclusions:

The FR radiographic appearance may be considered a predictor of this anatomy. Second mandibular molars and females had a higher incidence ratio. Apparently, the mandibular C-shaped anatomy is more common in the population of this study than that has been previously reported for the European population.

Root and Root Canal Morphology Differences Between Genders: A Comprehensive in-vivo CBCT Study in a Saudi Population

OBJECTIVES

To comprehensively explore the differences of all maxillary and mandibular permanent teeth in relation to number of roots, number of root canals, and root canal configuration between both genders in a Saudi Arabian population.

METHODS

This retrospective radiographic study comprised 208 subjects (48% males and 52% females) with a mean age 28.74±9.56 years. The CBCT images of the recruited subjects were evaluated for all permanent teeth. A careful examination was obtained by optimal visualization using all the software features. The data were analyzed using SPSS software program. Cohen's Kappa test was used for reliability and the Chi-squared test of association was used for the differences between both genders in relation to the study variables. A P-value < 0.05 was considered significant.

RESULTS

A total of 5254 maxillary and mandibular permanent teeth were evaluated. In relation to number of roots, there were no significant differences between both genders for all maxillary and mandibular teeth together (P= 0.064) as well as for maxillary and mandibular teeth separately (P= 0.315 and P= 0.100, respectively). A significant difference was found between males and females in relation to the number of canals of maxillary teeth (P= 0.014). For mandibular teeth, the significant level of difference was at the cut-off point (P= 0.050). For all maxillary and mandibular teeth together, the distribution among both genders was not significant (P= 0.082). The difference between both genders with regard to canal configuration of maxillary roots was highly statistically significant (P< 0.001). For mandibular teeth, the difference between males and females in relation canal configuration of anterior and premolar teeth was significant (P= 0.016) while, the difference was not significant when related to mesial roots of 1st and 2nd molars (P= 0.205). However, the difference was highly significant when related to distal roots of 1st and 2nd molars (P< 0.001).

CONCLUSION

No significant differences between both genders in relation to number of roots were found. Regarding the number of canals, significant differences were found only in three groups out of 14 groups of teeth with females who had a smaller number of canals than males. For canal configuration, two groups of maxillary teeth and three groups of mandibular teeth showed statistically significant differences between both genders.