Synthesis of customized petroleum-replica fuel molecules by targeted modification of free fatty acid pools in Escherichia coli

Coordinated conformational changes in P450 decarboxylases enable hydrocarbons production from renewable feedstocks

Fatty acid peroxygenases have emerged as promising biocatalysts for hydrocarbon biosynthesis due to their ability to perform C-C scission, producing olefins - key building blocks for sustainable materials and fuels. These enzymes operate through non-canonical and complex mechanisms that yield a bifurcated chemoselectivity between hydroxylation and decarboxylation. In this study, we elucidate structural features in P450 decarboxylases that enable the catalysis of unsaturated substrates, expanding the mechanistic pathways for decarboxylation reaction. Combining X-ray crystallography, molecular dynamics simulations, and machine learning, we have identified intricate molecular rearrangements within the active site that enable the Cβ atom of the substrate to approach the heme iron, thereby promoting oleate decarboxylation. Furthermore, we demonstrate that the absence of the aromatic residue in the Phe-His-Arg triad preserves chemoselectivity for alkenes, providing a distinct perspective on the molecular determinants of decarboxylation activity. Ultimately, these findings enable the sustainable production of biohydrocarbons from industrial feedstocks.

Genome and metabolome analysis of Bacillus sp. Hex-HIT36: A newly screened functional microorganism for the degradation of 1-hexadecene in industrial wastewater

1-Hexadecene has been detected at a level of mg/L in both influent and effluent of wastewater treatment plants situated in chemical/pharmaceutical industrial parks, which poses a potential threat to the environment. However, few reports are available on aerobic metabolic pathways and microorganisms involved in 1-Hexadecene degradation. In this study, a new strain of 1-Hexadecene-degrading bacteria, Bacillus sp. Hex-HIT36 (HIT36), was isolated from the activated sludge of a wastewater treatment plants located in an industrial park. The physicochemical properties and degradation efficacy of HIT36 were investigated. HIT36 was cultured on a medium containing 1-Hexadecene as a sole carbon source; it was found to remove ∼67% of total organic carbon as confirmed by mass spectrometric analysis of intermediate metabolites. Metabolomic and genomic analysis showed that HIT36 possesses various enzymes, namely, pyruvate dehydrogenase, dihydropolyhydroxyl dehydrogenase, and 2-oxoglutarate-2-oxoiron oxidoreductase (subunit alpha), which assist in the metabolization of readily available carbon source or long chain hydrocarbons present in the growth medium/vicinity. This suggests that HIT36 has efficient long-chain alkane degradation efficacy, and understanding the alkane degradation mechanism of this strain can help in developing technologies for the degradation of long-chain alkanes present in wastewater, thereby assisting in the bioremediation of environment.

Biosynthesis pathways of expanding carbon chains for producing advanced biofuels

Because the thermodynamic property is closer to gasoline, advanced biofuels (C ≥ 6) are appealing for replacing non-renewable fossil fuels using biosynthesis method that has presented a promising approach. Synthesizing advanced biofuels (C ≥ 6), in general, requires the expansion of carbon chains from three carbon atoms to more than six carbon atoms. Despite some specific biosynthesis pathways that have been developed in recent years, adequate summary is still lacking on how to obtain an effective metabolic pathway. Review of biosynthesis pathways for expanding carbon chains will be conducive to selecting, optimizing and discovering novel synthetic route to obtain new advanced biofuels. Herein, we first highlighted challenges on expanding carbon chains, followed by presentation of two biosynthesis strategies and review of three different types of biosynthesis pathways of carbon chain expansion for synthesizing advanced biofuels. Finally, we provided an outlook for the introduction of gene-editing technology in the development of new biosynthesis pathways of carbon chain expansion.

Production of Fatty Acids and Derivatives Using Cyanobacteria

Fatty acids and their derivatives are highly valuable chemicals that can be produced through chemical or enzymatic processes using plant lipids. This may compete with human food sources. Therefore, there has been an urge to create a new method for synthesizing these chemicals. One approach is to use microbial cells, specifically cyanobacteria, as a factory platform. Engineering may need to be implemented in order to allow a cost-competitive production and to enable a production of a variety of different fatty acids and derivatives. In this chapter, we explain in details the importance of fatty acids and their derivatives, including fatty aldehydes, fatty alcohols, hydrocarbons, fatty acid methyl esters, and hydroxy fatty acids. The production of these chemicals using cyanobacterial native metabolisms together with strategies to engineer them are also explained. Moreover, recent examples of fatty acid and fatty acid derivative production from engineered cyanobacteria are gathered and reported. Commercial opportunities to manufacture fatty acids and derivatives are also discussed in this chapter. Altogether, it is clear that fatty acids and their derivatives are important chemicals, and with recent advancements in genetic engineering, a cyanobacterial platform for bio-based production is feasible. However, there are regulations and guidelines in place for the use of genetically modified organisms (GMOs) and some further developments are still needed before commercialization can be reached.

Towards engineered yeast as production platform for capsaicinoids

Capsaicinoids are bioactive alkaloids produced by the chili pepper fruit and are known to be the most potent agonists of the human pain receptor TRPV1 (Transient Receptor Potential Cation Channel Subfamily V Member 1). They are currently produced by extraction from chili pepper fruit or by chemical synthesis. Transfer of the biosynthetic route to a microbial host could enable more efficient capsaicinoid production by fermentation and may also enable the use of synthetic biology to create a diversity of new compounds with potentially improved properties. This review summarises the current state of the art on the biosynthesis of capsaicinoid precursors in baker's yeast, Saccharomyces cerevisiae, and discusses bioengineering strategies for achieving total synthesis from sugar.

Insights into cyanobacterial alkane biosynthesis

Alkanes are high-energy molecules that are compatible with enduring liquid fuel infrastructures, which make them highly suitable for being next-generation biofuels. Though biological production of alkanes has been reported in various microorganisms, the reports citing photosynthetic cyanobacteria as natural producers have been the most consistent for the long-chain alkanes and alkenes (C15-C19). However, the production of alkane in cyanobacteria is low, leading to its extraction being uneconomical for commercial purposes. In order to make alkane production economically feasible from cyanobacteria, the titre and yield need to be increased by several orders of magnitude. In the recent past, efforts have been made to enhance alkane production, although with a little gain in yield, leaving space for much improvement. Genetic manipulation in cyanobacteria is considered challenging, but recent advancements in genetic engineering tools may assist in manipulating the genome in order to enhance alkane production. Further, advancement in a basic understanding of metabolic pathways and gene functioning will guide future research for harvesting the potential of these tiny photosynthetically efficient factories. In this review, our focus would be to highlight the current knowledge available on cyanobacterial alkane production, and the potential aspects of developing cyanobacterium as an economical source of biofuel. Further insights into different metabolic pathways and hosts explored so far, and possible challenges in scaling up the production of alkanes will also be discussed.

Microbial pathways for advanced biofuel production

Decarbonisation of the transport sector is essential to mitigate anthropogenic climate change. Microbial metabolisms are already integral to the production of renewable, sustainable fuels and, building on that foundation, are being re-engineered to generate the advanced biofuels that will maintain mobility of people and goods during the energy transition. This review surveys the range of natural and engineered microbial systems for advanced biofuels production and summarises some of the techno-economic challenges associated with their implementation at industrial scales.

Cellulosic hydrocarbons production by engineering dual synthesis pathways in Corynebacterium glutamicum

Background

Lignocellulose provides the only practical carbohydrates feedstock for sustainable bioproduction of hydrocarbons as future alternative of fossil fuels. Production of hydrocarbons from lignocellulose is achieved by a biorefinery process chain including pretreatment to breakdown the crystalline structure for cellulase-catalyzed hydrolysis, detoxification of inhibitory compounds generated during pretreatment, enzymatic hydrolysis to fermentable monosaccharide sugars, and fermentation to hydrocarbon products. The major barriers on fermentative production of hydrocarbons from lignocellulose include two aspects: one is the inherent stress of pretreatment-derived inhibitors on microbial cells, the other is the toxicity of hydrocarbons to cell membranes. The microbial cell factory should be tolerant to both inhibitor stress and hydrocarbons toxicity.

Results

Corynebacterium glutamicum was selected as the starting strain of hydrocarbons synthesis since it is well adapted to lignocellulose hydrolysate environment. The dual hydrocarbon synthesis pathways were constructed in an industrial C. glutamicum S9114 strain. The first pathway was the regular one in microalgae composed of fatty acyl-acyl carrier protein (fatty acyl-ACP) reductase (AAR) and aldehyde deformylating oxygenase (ADO) with fatty acyl-ACP as precursor. The second pathway was the direct decarboxylation of free fatty acid by fatty acid decarboxylase (OleT) using the rich fatty acids from the disruption of the transcriptional regulator fasR gene. The transmembrane transportation of hydrocarbon products was avoided by secretively expressing the fatty acid decarboxylase (OleT) to the extracellular space. The hydrocarbons generation from glucose reached 29.2 mg/L, in which the direct decarboxylation pathway contributed more than 70% of the total hydrocarbons generation, and the AAR–ADO pathway contributed the rest 30%.

Conclusion

The dual hydrocarbon synthesis pathways (OleT and AAR–ADO pathways) were constructed in the inhibitors tolerant C. glutamicum S9114 strain for hydrocarbon production using lignocellulose feedstock as the starting feedstock. When corn stover was used for hydrocarbons production after dry acid pretreatment and biodetoxification, the hydrocarbons generation reached 16.0 mg/L. This study provided a new strategy for hydrocarbons synthesis using microbial cell factory suitable for lignocellulose feedstock.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13068-022-02129-7.

Understanding metabolic phenomena accompanying high levels of yeast in broiler chicken diets and resulting carcass weight and meat quality changes

The use of yeast as a protein source was investigated in broiler chicken diets on carcass quality, storage stability, and metabolite changes in leg meat. Male Ross 308 chickens (n = 100) were fed with one of 5 diets: control, control added 0.6% formic acid, or 3 diets where soybean meal was substituted with 10, 20, and 30% crude protein from inactivated yeast Cyberlindnera jadinii (CJ10, CJ20, CJ30, respectively). The yeast-containing diets reduced carcass weight, linoleic acid, and warm-over flavor in chicken leg meat. Protein degradation-related metabolite biomarkers were upregulated in the leg of chickens that were fed yeast-containing diets, indicating an adaptive response to the loss of appetite. Chill-stored leg meat of birds fed yeast diets showed increased browning and metallic taste compared with those fed the control diet. The use of formic acid in the diet reduced cooking loss and had a positive effect on vitamin B content.

Metabolic engineering Yarrowia lipolytica for a dual biocatalytic system to produce fatty acid ethyl esters from renewable feedstock in situ and in one pot

Given the grave concerns over increasing consumption of petroleum resources and dramatic environmental changes arising from carbon dioxide emissions worldwide, microbial biosynthesis of fatty acid ethyl ester (FAEE) biofuels as renewable and sustainable replacements for petroleum-based fuels has attracted much attention. As one of the most important microbial chassis, the nonconventional oleaginous yeast Yarrowia lipolytica has emerged as a paradigm organism for the production of several advanced biofuels and chemicals. Here, we report the engineering of Y. lipolytica for use as an efficient dual biocatalytic system for in situ and one-pot production of FAEEs from renewable feedstock. Compared to glucose with 5.7% (w/w) conversion rate to FAEEs, sunflower seed oil in the culture medium was efficiently used to generate FAEEs with 84% (w/w) conversion rate to FAEEs by the engineered Y. lipolytica strain GQY20 that demonstrates an optimized intercellular heterologous FAEE synthesis pathway. In particular, the titer of extracellular FAEEs from sunflower seed oil reached 9.9 g/L, 10.9-fold higher than that with glucose as a carbon source. An efficient dual biocatalytic system combining ex vivo and strengthened in vitro FAEE production routes was constructed by overexpression of a lipase (Lip2) variant in the background strain GQY20, which further increased FAEEs levels to 13.5 g/L. Notably, deleting the ethanol metabolism pathway had minimal impact on FAEE production. Finally, waste cooking oil, a low-cost oil-based substance, was used as a carbon source for FAEE production in the Y. lipolytica dual biocatalytic system, resulting in production of 12.5 g/L FAEEs. Thus, the developed system represents a promising green and sustainable process for efficient biodiesel production. KEY POINTS: • FAEEs were produced by engineered Yarrowia lipolytica. • A Lip2 variant was overexpressed in the yeast to create a dual biocatalytic system. • Waste cooking oil as a substrate resulted in a high titer of 12.5 g/L FAEEs.

Advances in developing metabolically engineered microbial platforms to produce fourth-generation biofuels and high-value biochemicals

Producing bio-based chemicals is imperative to establish an eco-friendly circular bioeconomy. However, the compromised titer of these biochemicals hampers their commercial implementation. Advances in genetic engineering tools have enabled researchers to develop robust strains producing desired titers of the next-generation biofuels and biochemicals. The native and non-native pathways have been extensively engineered in various host strains via pathway reconstruction and metabolic flux redirection of lipid metabolism and central carbon metabolism to produce myriad biomolecules including alcohols, isoprenoids, hydrocarbons, fatty-acids, and their derivatives. This review has briefly covered the research efforts made during the previous decade to produce advanced biofuels and biochemicals through engineered microbial platforms along with the engineering approaches employed. The efficiency of the various techniques along with their shortcomings is also covered to provide a comprehensive overview of the progress and future directions to achieve higher titer of fourth-generation biofuels and biochemicals while keeping environmental sustainability intact.

Recent Progress and Trends in the Development of Microbial Biofuels from Solid Waste—A Review

This review covers the recent progress in the design and application of microbial biofuels, assessing the advancement of genetic engineering undertakings and their marketability, and lignocellulosic biomass pretreatment issues. Municipal solid waste (MSW) is a promising sustainable biofuel feedstock due to its high content of lignocellulosic fiber. In this review, we compared the production of fatty alcohols, alkanes, and n-butanol from residual biogenic waste and the environmental/economic parameters to that of conventional biofuels. New synthetic biology tools can be used to engineer fermentation pathways within micro-organisms to produce long-chain alcohols, isoprenoids, long-chain fatty acids, and esters, along with alkanes, as substitutes to petroleum-derived fuels. Biotechnological advances have struggled to address problems with bioethanol, such as lower energy density compared to gasoline and high corrosive and hygroscopic qualities that restrict its application in present infrastructure. Biofuels derived from the organic fraction of municipal solid waste (OFMSW) may have less environmental impacts compared to traditional fuel production, with the added benefit of lower production costs. Unfortunately, current advanced biofuel production suffers low production rates, which hinders commercial scaling-up efforts. Microbial-produced biofuels can address low productivity while increasing the spectrum of produced bioenergy molecules.

Microbial engineering to produce fatty alcohols and alkanes

Owing to their high energy density and composition, fatty acid-derived chemicals possess a wide range of applications such as biofuels, biomaterials, and other biochemical, and as a consequence, the global annual demand for products has surpassed 2 million tons. With the exhausting petroleum reservoirs and emerging environmental concerns on using petroleum feedstock, it has become indispensable to shift to a renewable-based industry. With the advancement in the field of synthetic biology and metabolic engineering, the use of microbes as factories for the production of fatty acid-derived chemicals is becoming a promising alternative approach for the production of these derivatives. Numerous metabolic approaches have been developed for conditioning the microbes to improve existing or develop new methodologies capable of efficient oleochemical production. However, there still exist several limitations that need to be addressed for the commercial viability of the microbial cell factory production. Though substantial advancement has been made toward successfully producing these fatty acids derived chemicals, a considerable amount of work needs to be done for improving the titers. In the present review, we aim to address the roadblocks impeding the heterologous production, the engineering pathway strategies implemented across the range of microbes in a detailed manner, and the commercial readiness of these molecules of immense application.

Tropism of Coxsackie virus A9 depends on the +1 position of the RGD (arginine- glycine- aspartic acid) motif found at the C' terminus of its VP1 capsid protein

An understanding of how viruses interact with their receptors is vital as this step is a major determinant of host susceptibility and disease. The enterovirus coxsackievirus A9 (CVA9) is an important pathogen responsible for respiratory infections, myocarditis, infections of the central nervous system, chronic dilated cardiomyopathy and possibly type I diabetes. CVA9 harbours an integrin- recognition motif, RGD (Arg-Gly-Asp), in the capsid protein VP1 and this motif is believed to be primarily responsible for binding to integrins αvβ6 and/or αvβ3 during cell entry. Despite the consistent conservation of RGD-flanking amino acids in multiple RGD-containing picornaviruses, the significance of these amino acids to cell tropism has not been thoroughly investigated. In this study we used 10 CVA9 mutants and a panel of cells to analyse cell tropism. We showed that CVA9 infection proceeds by either an RGD- dependent or an apparently RGD- independent pathway. Differences in the amino acid found at the +1 position of the RGD motif affect the cell tropism of CVA9 when an RGD- dependent pathway is used. Naturally occurring CVA9 isolates have either the sequence RGDM and RGDL and we found that the corresponding viruses in our panel infected cells most efficiently. There was also a strong selection pressure for RGDL in adaptation experiments. However, there was also an unexpected selection of an RGDL variant in an apparently RGD- independent cell line. There was also no simple relationship between infection of cells and expression of integrins αvβ3 and αvβ6. The results obtained have greatly improved our understanding of how CVA9 infects cells. This will be useful in the design of antivirus drugs and also gives a framework for the modification of CVA9 or other RGD containing picornaviruses for specific targeting of cancer cells for oncolytic therapy.

Insights into the unique carboxylation reactions in the metabolism of propylene and acetone

Alkenes and ketones are two classes of ubiquitous, toxic organic compounds in natural environments produced in several biological and anthropogenic processes. In spite of their toxicity, these compounds are utilized as primary carbon and energy sources or are generated as intermediate metabolites in the metabolism of other compounds by many diverse bacteria. The aerobic metabolism of some of the smallest and most volatile of these compounds (propylene, acetone, isopropanol) involves novel carboxylation reactions resulting in a common product acetoacetate. Propylene is metabolized in a four-step pathway involving five enzymes where the penultimate step is a carboxylation reaction catalyzed by a unique disulfide oxidoreductase that couples reductive cleavage of a thioether linkage with carboxylation to produce acetoacetate. The carboxylation of isopropanol begins with conversion to acetone via an alcohol dehydrogenase. Acetone is converted to acetoacetate in a single step by an acetone carboxylase which couples the hydrolysis of MgATP to the activation of both acetone and bicarbonate, generating highly reactive intermediates that are condensed into acetoacetate at a Mn2+ containing the active site. Acetoacetate is then utilized in central metabolism where it is readily converted to acetyl-coenzyme A and subsequently converted into biomass or utilized in energy metabolism via the tricarboxylic acid cycle. This review summarizes recent structural and biochemical findings that have contributed significant insights into the mechanism of these two unique carboxylating enzymes.

Cyanobacterial aldehyde deformylating oxygenase: Structure, function, and potential in biofuels production

The conversion of aldehydes to valuable alkanes via cyanobacterial aldehyde deformylating oxygenase is of great interest. The availability of fossil reserves that keep on decreasing due to human exploitation is worrying, and even more troubling is the combustion emission from the fuel, which contributes to the environmental crisis and health issues. Hence, it is crucial to use a renewable and eco-friendly alternative that yields compound with the closest features as conventional petroleum-based fuel, and that can be used in biofuels production. Cyanobacterial aldehyde deformylating oxygenase (ADO) is a metal-dependent enzyme with an α-helical structure that contains di‑iron at the active site. The substrate enters the active site of every ADO through a hydrophobic channel. This enzyme exhibits catalytic activity toward converting C_n aldehyde to C_n-1 alkane and formate as a co-product. These cyanobacterial enzymes are small and easy to manipulate. Currently, ADOs are broadly studied and engineered for improving their enzymatic activity and substrate specificity for better alkane production. This review provides a summary of recent progress in the study of the structure and function of ADO, structural-based engineering of the enzyme, and highlight its potential in producing biofuels.

Repurposing Modular Polyketide Synthases and Non-ribosomal Peptide Synthetases for Novel Chemical Biosynthesis

In nature, various enzymes govern diverse biochemical reactions through their specific three-dimensional structures, which have been harnessed to produce many useful bioactive compounds including clinical agents and commodity chemicals. Polyketide synthases (PKSs) and non-ribosomal peptide synthetases (NRPSs) are particularly unique multifunctional enzymes that display modular organization. Individual modules incorporate their own specific substrates and collaborate to assemble complex polyketides or non-ribosomal polypeptides in a linear fashion. Due to the modular properties of PKSs and NRPSs, they have been attractive rational engineering targets for novel chemical production through the predictable modification of each moiety of the complex chemical through engineering of the cognate module. Thus, individual reactions of each module could be separated as a retro-biosynthetic biopart and repurposed to new biosynthetic pathways for the production of biofuels or commodity chemicals. Despite these potentials, repurposing attempts have often failed owing to impaired catalytic activity or the production of unintended products due to incompatible protein–protein interactions between the modules and structural perturbation of the enzyme. Recent advances in the structural, computational, and synthetic tools provide more opportunities for successful repurposing. In this review, we focused on the representative strategies and examples for the repurposing of modular PKSs and NRPSs, along with their advantages and current limitations. Thereafter, synthetic biology tools and perspectives were suggested for potential further advancement, including the rational and large-scale high-throughput approaches. Ultimately, the potential diverse reactions from modular PKSs and NRPSs would be leveraged to expand the reservoir of useful chemicals.

In vivo Quantification of Alkanes in Escherichia coli

Microbial production of alkanes employing synthetic biology tools has gained tremendous attention owing to the high energy density and similarity of alkanes to existing petroleum fuels. One of the most commonly studied pathways includes the production of alkanes by AAR (acyl-ACP (acyl carrier protein) reductase)-ADO (aldehyde deformylating oxygenase) pathway. Here, the intermediates of fatty acid synthesis pathway are used as substrate by the AAR enzyme to make fatty aldehyde, which is then deformylated by ADO to make linear chain alkane. However, the variation in substrate availability to the first enzyme of the pathway, i.e., AAR, via fatty acid synthesis pathway and low turnover of the ADO enzyme make calculation of yields and titers under in vivo conditions extremely difficult. In vivo assay employing external addition of defined substrates for ADO enzyme into the medium helps to monitor the influx of substrate hence providing a more accurate measurement of the product yields. In this protocol, we include a detailed guide for implementing the in vivo assay for monitoring alkane production in E. coli.

Building cell factories for the production of advanced fuels

Synthetic biology-based engineering strategies are being extensively employed for microbial production of advanced fuels. Advanced fuels, being comparable in energy efficiency and properties to conventional fuels, have been increasingly explored as they can be directly incorporated into the current fuel infrastructure without the need for reconstructing the pre-existing set-up rendering them economically viable. Multiple metabolic engineering approaches have been used for rewiring microbes to improve existing or develop newly programmed cells capable of efficient fuel production. The primary challenge in using these approaches is improving the product yield for the feasibility of the commercial processes. Some of the common roadblocks towards enhanced fuel production include - limited availability of flux towards precursors and desired pathways due to presence of competing pathways, limited cofactor and energy supply in cells, the low catalytic activity of pathway enzymes, obstructed product transport, and poor tolerance of host cells for end products. Consequently, despite extensive studies on the engineering of microbial hosts, the costs of industrial-scale production of most of these heterologously produced fuel compounds are still too high. Though considerable progress has been made towards successfully producing some of these biofuels, a substantial amount of work needs to be done for improving the titers of others. In this review, we have summarized the different engineering strategies that have been successfully used for engineering pathways into commercial hosts for the production of advanced fuels and different approaches implemented for tuning host strains and pathway enzymes for scaling up production levels.

A novel C-terminal degron identified in bacterial aldehyde decarbonylases using directed evolution

BACKGROUND

Aldehyde decarbonylases (ADs), which convert acyl aldehydes into alkanes, supply promising solution for producing alkanes from renewable feedstock. However the instability of ADs impedes their further application. Therefore, the current study aimed to investigate the degradation mechanism of ADs and engineer it towards high stability.

RESULTS

Here, we describe the discovery of a degradation tag (degron) in the AD from marine cyanobacterium Prochlorococcus marinus using error-prone PCR-based directed evolution system. Bioinformatic analysis revealed that this C-terminal degron is common in bacterial ADs and identified a conserved C-terminal motif, RMSAYGLAAA, representing the AD degron (ADcon). Furthermore, we demonstrated that the ATP-dependent proteases ClpAP and Lon are involved in the degradation of AD-tagged proteins in E. coli, thereby limiting alkane production. Deletion or modification of the degron motif increased alkane production in vivo.

CONCLUSION

This work revealed the presence of a novel degron in bacterial ADs responsible for its instability. The in vivo experiments proved eliminating or modifying the degron could stabilize AD, thereby producing higher titers of alkanes.

Bacterial Semiochemicals and Transkingdom Interactions with Insects and Plants

A peculiar feature of all living beings is their capability to communicate. With the discovery of the quorum sensing phenomenon in bioluminescent bacteria in the late 1960s, it became clear that intraspecies and interspecies communications and social behaviors also occur in simple microorganisms such as bacteria. However, at that time, it was difficult to imagine how such small organisms-invisible to the naked eye-could influence the behavior and wellbeing of the larger, more complex and visible organisms they colonize. Now that we know this information, the challenge is to identify the myriad of bacterial chemical signals and communication networks that regulate the life of what can be defined, in a whole, as a meta-organism. In this review, we described the transkingdom crosstalk between bacteria, insects, and plants from an ecological perspective, providing some paradigmatic examples. Second, we reviewed what is known about the genetic and biochemical bases of the bacterial chemical communication with other organisms and how explore the semiochemical potential of a bacterium can be explored. Finally, we illustrated how bacterial semiochemicals managing the transkingdom communication may be exploited from a biotechnological point of view.

Continuous photoproduction of hydrocarbon drop-in fuel by microbial cell factories

Use of microbes to produce liquid transportation fuels is not yet economically viable. A key point to reduce production costs is the design a cell factory that combines the continuous production of drop-in fuel molecules with the ability to recover products from the cell culture at low cost. Medium-chain hydrocarbons seem ideal targets because they can be produced from abundant fatty acids and, due to their volatility, can be easily collected in gas phase. However, pathways used to produce hydrocarbons from fatty acids require two steps, low efficient enzymes and/or complex electron donors. Recently, a new hydrocarbon-forming route involving a single enzyme called fatty acid photodecarboxylase (FAP) was discovered in microalgae. Here, we show that in illuminated E. coli cultures coexpression of FAP and a medium-chain fatty acid thioesterase results in continuous release of volatile hydrocarbons. Maximum hydrocarbon productivity was reached under low/medium light while higher irradiance resulted in decreased amounts of FAP. It was also found that the production rate of hydrocarbons was constant for at least 5 days and that 30% of total hydrocarbons could be collected in the gas phase of the culture. This work thus demonstrates that the photochemistry of the FAP can be harnessed to design a simple cell factory that continuously produces hydrocarbons easy to recover and in pure form.

Biosynthesis, regulation, and engineering of microbially produced branched biofuels

The steadily increasing demand on transportation fuels calls for renewable fuel replacements. This has attracted a growing amount of research to develop advanced biofuels that have similar physical, chemical, and combustion properties with petroleum-derived fossil fuels. Early generations of biofuels, such as ethanol, butanol, and straight-chain fatty acid-derived esters or hydrocarbons suffer from various undesirable properties and can only be blended in limited amounts. Recent research has shifted to the production of branched-chain biofuels that, compared to straight-chain fuels, have higher octane values, better cold flow, and lower cloud points, making them more suitable for existing engines, particularly for diesel and jet engines. This review focuses on several types of branched-chain biofuels and their immediate precursors, including branched short-chain (C4-C8) and long-chain (C15-C19)-alcohols, alkanes, and esters. We discuss their biosynthesis, regulation, and recent efforts in their overproduction by engineered microbes.

Variances in cellular sedimentation behavior as an effective enrichment method of hydrocarbon-overproducing Micrococcus luteus strains

BACKGROUND

Aliphatic hydrocarbons of microbial origin are highly interesting candidate biofuels because these molecules are identical or very similar to the main components of petroleum-based gasoline and diesel fuels. The high-GC Gram-positive bacterium Micrococcus luteus is capable of naturally synthesizing long-chain, iso- and anteiso-branched alkenes which are formed via the head-to-head condensation of fatty acid thioesters by a dedicated enzyme system. The present study describes the relation we observed between olefin production and cell buoyancy in Micrococcus luteus and the use of this phenotype to simply and efficiently separate cells from a mixture based on their hydrocarbon content.

METHODS

We generated M. luteus mutants producing different amounts of olefins and used them in mixing and sedimentation experiments, olefin content analysis by GC-MS and in equilibrium centrifugation in Percoll gradients.

RESULTS

We found well-detectable differences in the buoyant densities of the examined strains, which correlated with the amounts of hydrocarbons produced by the cells. We also demonstrate how our observations can be used to simply and efficiently fractionate cells based on their hydrocarbon content.

CONCLUSIONS

In summary, we show that cultures of M. luteus cells sediment at distinct rates depending on the amounts of alkenes produced. Our results indicate that buoyant cell density is the primary cause for the observed differences in sedimentation behaviour. The simple separation strategy described here can be a valuable tool in various mutagenesis and enrichment protocols, aimed at generating and isolating strains with increased olefin productivity.

Cyanobacterial Enzymes for Bioalkane Production

Cyanobacterial biosynthesis of alkanes is an attractive way of producing substitutes for petroleum-based fuels. Key enzymes for bioalkane production in cyanobacteria are acyl-ACP reductase (AAR) and aldehyde-deformylating oxygenase (ADO). AAR catalyzes the reduction of the fatty acyl-ACP/CoA substrates to fatty aldehydes, which are then converted into alkanes/alkenes by ADO. These enzymes have been widely used for biofuel production by metabolic engineering of cyanobacteria and other organisms. However, both proteins, particularly ADO, have low enzymatic activities, and their catalytic activities are desired to be improved for use in biofuel production. Recently, progress has been made in the basic sciences and in the application of AAR and ADO in alkane production. This chapter provides an overview of recent advances in the study of the structure and function of AAR and ADO, protein engineering of these enzymes for improving activity and modifying substrate specificities, and examples of metabolic engineering of cyanobacteria and other organisms using AAR and ADO for biofuel production.

Requirement of alkanes for salt tolerance of Cyanobacteria: characterization of alkane synthesis genes from salt-sensitive Synechococcus elongatus PCC7942 and salt-tolerant Aphanothece halophytica

Cyanobacteria have been attracting great interest in the research area of biofuel production. All Cyanobacteria contain C₁₅ -C₁₉ hydrocarbons, but physiological roles of hydrocarbons remain to be clarified. Recently, two universal but mutually exclusive hydrocarbon production pathways in Cyanobacteria were discovered. In this study, we constructed a deletion mutant of alkane synthesis genes in fresh water cyanobacterium Synechococcus elongates PCC 7942. The mutant was incapable to produce alkanes and exhibited normal growth phenotype at low salinity. But, the mutant became salt sensitive. Overexpression of alkane synthesis genes from halotolerant Aphanothece halophytica in Synechococcus PCC7942 restored the growth defect. The alkane synthesis gene from halotolerant cyanobacterium A. halophytica was salt induced and produced a significant amount of alkanes at high salinity. These results indicate the requirement of alkanes for salt tolerance, and the alkane synthesis genes from A. halophytica could be a promising candidate for future biofuel application.

SIGNIFICANCE AND IMPACT OF THE STUDY

Cyanobacteria have been attracting great interest in the research area of biofuel production. All Cyanobacteria contain C₁₅ -C₁₉ hydrocarbons, but physiological roles of hydrocarbons remain to be clarified. In this study, it was found that the deletion mutant of alkane synthesis genes in fresh water cyanobacterium Synechococcus elongates PCC 7942 was incapable to produce alkanes and salt sensitive. The alkane synthesis gene from halotolerant cyanobacterium Aphanothece halophytica was salt induced and produced a significant amount of alkanes at high salinity. These results demonstrate the alkane synthesis genes from A. halophytica could be a promising candidate for future biofuel application.

Light-Activated Electron Transfer and Turnover in Ru-Modified Aldehyde Deformylating Oxygenases

Conversion of biological molecules into fuels or other useful chemicals is an ongoing chemical challenge. One class of enzymes that has received attention for such applications is aldehyde deformylating oxygenase (ADO) enzymes. These enzymes convert aliphatic aldehydes to the alkanes and formate. In this work, we prepared and investigated ADO enzymes modified with Ru^II(tris-diimine) photosensitizers as a starting point for probing intramolecular electron transfer events. Three variants were prepared, with Ru^II-modification at the wild type (WT) residue C70, at the R62C site in one mutant ADO, and at both C62 and C70 in a second mutant ADO protein. The single-site modification of WT ADO at C70 using a cysteine-reactive label is an important observation and opens a way forward for new studies of electron flow, mechanism, and redox catalysis in ADO. These Ru-ADO constructs can perform the ADO catalytic cycle in the presence of light and a sacrificial reductant. In this work, the Ru photosensitizer serves as a tethered, artificial reductase that promotes turnover of aldehyde substrates with different carbon chain lengths. Peroxide side products were detected for shorter chain aldehydes, concomitant with less productive turnover. Analysis using semiclassical electron transfer theory supports proposals for hopping pathway for electron flow in WT ADO and in our new Ru-ADO proteins.

Chimeric Fatty Acyl-Acyl Carrier Protein Thioesterases Provide Mechanistic Insight into Enzyme Specificity and Expression

Medium-chain fatty acids are commodity chemicals. Increasing and modifying the activity of thioesterases (TEs) on medium-chain fatty acyl-acyl carrier protein (acyl-ACP) esters may enable a high-yield microbial production of these molecules. The plant Cuphea palustris harbors two distinct TEs: C. palustris FatB1 (CpFatB1) (C₈ specificity, lower activity) and CpFatB2 (C₁₄ specificity, higher activity) with 78% sequence identity. We combined structural features from these two enzymes to create several chimeric TEs, some of which showed nonnatural fatty acid production as measured by an enzymatic assay and gas chromatography-mass spectrometry (GC-MS). Notably, chimera 4 exhibited an increased C₈ fatty acid production in correlation with improved microbial expression. This chimera led us to identify CpFatB2-specific amino acids between positions 219 and 272 that lead to higher protein levels. Chimera 7 produced a broad range of fatty acids and appeared to combine a fatty acid binding pocket with long-chain specificity and an ACP interaction site that may activate fatty acid extrusion. Using homology modeling and in silico docking with ACP, we identified a "positive patch" within amino acids 162 to 218, which may direct the ACP interaction and regulate access to short-chain fatty acids. On the basis of this modeling, we transplanted putative ACP interaction sequences from CpFatB1 into CpFatB2 and created a chimeric thioesterase that produced medium-chain as well as long-chain fatty acids. Thus, the engineering of chimeric enzymes and characterizing their microbial activity and chain-length specificity suggested mechanistic insights into TE functions and also generated thioesterases with potentially useful properties. These observations may inform a rational engineering of TEs to allow alkyl chain length control.IMPORTANCE Medium-chain fatty acids are important commodity chemicals. These molecules are used as plastic precursors and in shampoos and other detergents and could be used as biofuel precursors if production economics were favorable. Hydrocarbon-based liquid fuels must be optimized to have a desired boiling point, low freezing point, low viscosity, and other physical characteristics. Similarly, the solubility and harshness of detergents and the flexibility of plastic polymers can be modulated. The length and distribution of the carbon chains in the hydrophobic tails determine these properties. The biological synthesis of cell membranes and fatty acids produces chains of primarily 16 to 18 carbons, which give rise to current biofuels. The ultimate goal of the work presented here is to engineer metabolic pathways to produce designer molecules with the correct number of carbons in a chain, so that such molecules could be used directly as specialty commodity chemicals or as fuels after minimal processing.

Label-free non-invasive quantitative measurement of lipid contents in individual microalgal cells using refractive index tomography

Microalgae are promising candidates for biofuel production due to their high lipid content. To facilitate utilization of the microalgae for biofuel, rapid quantification of the lipid contents in microalgae is necessary. However, conventional methods based on the chemical extraction of lipids require a time-consuming destructive extraction process. Here, we demonstrate label-free, non-invasive, rapid quantification of the lipid contents in individual micro-algal cells measuring the three-dimensional refractive index tomograms. We measure three-dimensional refractive index distributions within Nannochloropsis oculata cells and find that lipid droplets are identifiable in tomograms by their high refractive index. In addition, we alter N. oculata under nitrogen deficiency by measuring the volume, lipid weight, and dry cell weight of individual cells. Characterization of individual cells allows correlative analysis between the lipid content and size of individual cells.

A consensus-guided approach yields a heat-stable alkane-producing enzyme and identifies residues promoting thermostability

Aldehyde-deformylating oxygenase (ADO) is an essential enzyme for production of long-chain alkanes as drop-in biofuels, which are compatible with existing fuel systems. The most active ADOs are present in mesophilic cyanobacteria, especially Nostoc punctiforme Given the potential applications of thermostable enzymes in biorefineries, here we generated a thermostable (Cts)-ADO based on a consensus of ADO sequences from several thermophilic cyanobacterial strains. Using an in silico design pipeline and a metagenome library containing 41 hot-spring microbial communities, we created Cts-ADO. Cts-ADO displayed a 3.8-fold increase in pentadecane production on raising the temperature from 30 to 42 °C, whereas ADO from N. punctiforme (Np-ADO) exhibited a 1.7-fold decline. 3D structure modeling and molecular dynamics simulations of Cts- and Np-ADO at different temperatures revealed differences between the two enzymes in residues clustered on exposed loops of these variants, which affected the conformation of helices involved in forming the ADO catalytic core. In Cts-ADO, this conformational change promoted ligand binding to its preferred iron, Fe2, in the di-iron cluster at higher temperature, but the reverse was observed in Np-ADO. Detailed mapping of residues conferring Cts-ADO thermostability identified four amino acids, which we substituted individually and together in Np-ADO. Among these substitution variants, A161E was remarkably similar to Cts-ADO in terms of activity optima, kinetic parameters, and structure at higher temperature. A161E was located in loop L6, which connects helices H5 and H6, and supported ligand binding to Fe2 at higher temperatures, thereby promoting optimal activity at these temperatures and explaining the increased thermostability of Cts-ADO.

The role of acyl-CoA thioesterase ACOT8I in mediating intracellular lipid metabolism in oleaginous fungus Mortierella alpina

Thioesterases (TEs) play an essential role in the metabolism of fatty acids (FAs). To explore the role of TEs in mediating intracellular lipid metabolism in the oleaginous fungus Mortierella alpina, the acyl-CoA thioesterase ACOT8I was overexpressed. The contents of total fatty acids (TFAs) were the same in the recombinant strains as in the wild-type M. alpina, whilst the production of free fatty acids (FFAs) was enhanced from about 0.9% (wild-type) to 2.8% (recombinant), a roughly threefold increase. Linoleic acid content in FFA form constituted about 9% of the TFAs in the FFA fraction in the recombinant strains but only about 1.3% in the wild-type M. alpina. The gamma-linolenic acid and arachidonic acid contents in FFA form accounted for about 4 and 25%, respectively, of the TFAs in the FFA fraction in the recombinant strains, whilst neither of them in FFA form were detected in the wild-type M. alpina. Overexpression of the TE ACOT8I in the oleaginous fungus M. alpina reinforced the flux from acyl-CoAs to FFAs, improved the production of FFAs and tailored the FA profiles of the lipid species.

Impact of Branched-Chain Amino Acid Catabolism on Fatty Acid and Alkene Biosynthesis in Micrococcus luteus

Micrococcus luteus naturally produces alkenes, unsaturated aliphatic hydrocarbons, and represents a promising host to produce hydrocarbons as constituents of biofuels and lubricants. In this work, we identify the genes for key enzymes of the branched-chain amino acid catabolism in M. luteus, whose first metabolic steps lead also to the formation of primer molecules for branched-chain fatty acid and olefin biosynthesis, and demonstrate how these genes can be used to manipulate the production of specific olefins in this organism. We constructed mutants of several gene candidates involved in the branched-chain amino acid metabolism or its regulation and investigated the resulting changes in the cellular fatty acid and olefin profiles by GC/MS. The gene cluster encoding the components of the branched-chain α-keto acid dehydrogenase (BCKD) complex was identified by deletion and promoter exchange mutagenesis. Overexpression of the BCKD gene cluster resulted in about threefold increased olefin production whereas deletion of the cluster led to a drastic reduction in branched-chain fatty acid content and a complete loss of olefin production. The specificities of the acyl-CoA dehydrogenases of the branched amino acid degradation pathways were deduced from the fatty acid and olefin profiles of the respective deletion mutant strains. In addition, growth experiments with branched amino acids as the only nitrogen source were carried out with the mutants in order to confirm our annotations. Both the deletion mutant of the BCKD complex, responsible for the further degradation of all three branched-chain amino acids, as well as the deletion mutant of the proposed isovaleryl-CoA dehydrogenase (specific for leucine degradation) were not able to grow on leucine in contrast to the parental strain. In conclusion, our experiments allow the unambigous assignment of specific functions to the genes for key enzymes of the branched-chain amino acid metabolism of M. luteus. We also show how this knowledge can be used to engineer the isomeric composition and the chain lengths of the olefins produced by this organism.

Combination of type II fatty acid biosynthesis enzymes and thiolases supports a functional β-oxidation reversal

An engineered reversal of the β-oxidation cycle (r-BOX) and the fatty acid biosynthesis (FAB) pathway are promising biological platforms for advanced fuel and chemical production in part due to their iterative nature supporting the synthesis of various chain length products. While diverging in their carbon-carbon elongation reaction mechanism, iterative operation of each pathway relies on common chemical conversions (reduction, dehydration, and reduction) differing only in the attached moiety (acyl carrier protein (ACP) in FAB vs Coenzyme A in r-BOX). Given this similarity, we sought to determine whether FAB enzymes can be used in the context of r-BOX as a means of expanding available r-BOX components with a ubiquitous set of well characterized enzymes. Using enzymes from the type II FAB pathway (FabG, FabZ, and FabI) in conjunction with a thiolase catalyzing a non-decarboxylative condensation, we demonstrate that FAB enzymes support a functional r-BOX. Pathway operation with FAB enzymes was improved through computationally directed protein design to develop FabZ variants with amino acid substitutions designed to disrupt hydrogen bonding at the FabZ-ACP interface and introduce steric and electrostatic repulsion between the FabZ and ACP. FabZ with R126W and R121E substitutions resulted in improved carboxylic acid and alcohol production from one- and multiple-turn r-BOX compared to the wild-type enzyme. Furthermore, the ability for FAB enzymes to operate on functionalized intermediates was exploited to produce branched chain carboxylic acids through an r-BOX with functionalized priming. These results not only provide an expanded set of enzymes within the modular r-BOX pathway, but can also potentially expand the scope of products targeted through this pathway by operating with CoA intermediates containing various functional groups.

Enabling the synthesis of medium chain alkanes and 1-alkenes in yeast

Microbial synthesis of medium chain aliphatic hydrocarbons, attractive drop-in molecules to gasoline and jet fuels, is a promising way to reduce our reliance on petroleum-based fuels. In this study, we enabled the synthesis of straight chain hydrocarbons (C7-C13) by yeast Saccharomyces cerevisiae through engineering fatty acid synthases to control the chain length of fatty acids and introducing heterologous pathways for alkane or 1-alkene synthesis. We carried out enzyme engineering/screening of the fatty aldehyde deformylating oxygenase (ADO), and compartmentalization of the alkane biosynthesis pathway into peroxisomes to improve alkane production. The two-step synthesis of alkanes was found to be inefficient due to the formation of alcohols derived from aldehyde intermediates. Alternatively, the drain of aldehyde intermediates could be circumvented by introducing a one-step decarboxylation of fatty acids to 1-alkenes, which could be synthesized at a level of 3mg/L, 25-fold higher than that of alkanes produced via aldehydes.

Microbial Hydrocarbon Formation from Biomass

Fossil carbon sources mainly contain hydrocarbons, and these are used on a huge scale as fuel and chemicals. Producing hydrocarbons from biomass instead is receiving increased attention. Achievable yields are modest because oxygen atoms need to be removed from biomass, keeping only the lighter carbon and hydrogen atoms. Microorganisms can perform the required conversions, potentially with high selectivity, using metabolic pathways that often end with decarboxylation. Metabolic and protein engineering are used successfully to achieve hydrocarbon production levels that are relevant in a biorefinery context. This has led to pilot or demo processes for hydrocarbons such as isobutene, isoprene, and farnesene. In addition, some non-hydrocarbon fermentation products are being further converted into hydrocarbons using a final chemical step, for example, ethanol into ethene. The main advantage of direct microbial production of hydrocarbons, however, is their potentially easy recovery because they do not dissolve in fermentation broth.

Computational Redesign of Acyl-ACP Thioesterase with Improved Selectivity toward Medium-Chain-Length Fatty Acids

Enzyme and metabolic engineering offer the potential to develop biocatalysts for converting natural resources into a wide range of chemicals. To broaden the scope of potential products beyond natural metabolites, methods of engineering enzymes to accept alternative substrates and/or perform novel chemistries must be developed. DNA synthesis can create large libraries of enzyme-coding sequences, but most biochemistries lack a simple assay to screen for promising enzyme variants. Our solution to this challenge is structure-guided mutagenesis in which optimization algorithms select the best sequences from libraries based on specified criteria (i.e. binding selectivity). Here, we demonstrate this approach by identifying medium-chain (C₆-C₁₂) acyl-ACP thioesterases through structure-guided mutagenesis. Medium-chain fatty acids, products of thioesterase-catalyzed hydrolysis, are limited in natural abundance compared to long-chain fatty acids; the limited supply leads to high costs of C₆-C₁₀ oleochemicals such as fatty alcohols, amines, and esters. Here, we applied computational tools to tune substrate binding to the highly-active 'TesA thioesterase in Escherichia coli. We used the IPRO algorithm to design thioesterase variants with enhanced C₁₂- or C₈-specificity while maintaining high activity. After four rounds of structure-guided mutagenesis, we identified three thioesterases with enhanced production of dodecanoic acid (C₁₂) and twenty-seven thioesterases with enhanced production of octanoic acid (C₈). The top variants reached up to 49% C₁₂ and 50% C₈ while exceeding native levels of total free fatty acids. A comparably sized library created by random mutagenesis failed to identify promising mutants. The chain length-preference of 'TesA and the best mutant were confirmed in vitro using acyl-CoA substrates. Molecular dynamics simulations, confirmed by resolved crystal structures, of 'TesA variants suggest that hydrophobic forces govern 'TesA substrate specificity. We expect that the design rules we uncovered and the thioesterase variants identified will be useful to metabolic engineering projects aimed at sustainable production of medium-chain oleochemicals.

Comparison of orthologous cyanobacterial aldehyde deformylating oxygenases in the production of volatile C3-C7 alkanes in engineered E. coli

Aldehyde deformylating oxygenase (ADO) is a unique enzyme found exclusively in photosynthetic cyanobacteria, which natively converts acyl aldehyde precursors into hydrocarbon products embedded in cellular lipid bilayers. This capacity has opened doors for potential biotechnological applications aiming at biological production of diesel-range alkanes and alkenes, which are compatible with the nonrenewable petroleum-derived end-products in current use. The development of production platforms, however, has been limited by the relative inefficiency of ADO enzyme, promoting research towards finding new strategies and information to be used for rational design of enhanced pathways for hydrocarbon over-expression. In this work we present an optimized approach to study different ADO orthologs derived from different cyanobacterial species in an in vivo set-up in Escherichia coli. The system enabled comparison of alternative ADOs for the production efficiency of short-chain volatile C3-C7 alkanes, propane, pentane and heptane, and provided insight on the differences in substrate preference, catalytic efficiency and limitations associated with the enzymes. The work concentrated on five ADO orthologs which represent the most extensively studied cyanobacterial species in the field, and revealed distinct differences between the enzymes. In most cases the ADO from Nostoc punctiforme PCC 73102 performed the best in respect to yields and initial rates for the production of the volatile hydrocarbons. At the other extreme, the system harboring the ADO form Synechococcus sp. RS9917 produced very low amounts of the short-chain alkanes, primarily due to poor accumulation of the enzyme in E. coli. The ADOs from Synechocystis sp. PCC 6803 and Prochlorococcus marinus MIT9313, and the corresponding variant A134F displayed less divergence, although variation between chain-length preferences could be observed. The results confirmed the general trend of ADOs having decreasing catalytic efficiency towards precursors of decreasing chain-length, while expanding the knowledge on the species-specific traits, which may aid future pathway design and structure-based engineering of ADO for more efficient hydrocarbon production systems.

•

Five cyanobacterial aldehyde deformylating oxygenases were compared in E. coli.

•

The engineered pathways produced volatile C_n-1 alkanes from supplemented fatty acids.

•

The E. coli strains produced propane, pentane and heptane in the culture headspace.

•

The results revealed clear differences in the catalytic performance between the ADOs.

Leveraging microbial biosynthetic pathways for the generation of 'drop-in' biofuels

Advances in retooling microorganisms have enabled bioproduction of 'drop-in' biofuels, fuels that are compatible with existing spark-ignition, compression-ignition, and gas-turbine engines. As the majority of petroleum consumption in the United States consists of gasoline (47%), diesel fuel and heating oil (21%), and jet fuel (8%), 'drop-in' biofuels that replace these petrochemical sources are particularly attractive. In this review, we discuss the application of aldehyde decarbonylases to produce gasoline substitutes from fatty acid products, a recently crystallized reductase that could hydrogenate jet fuel precursors from terpene synthases, and the exquisite control of polyketide synthases to produce biofuels with desired physical properties (e.g., lower freezing points). With our increased understanding of biosynthetic logic of metabolic pathways, we discuss the unique advantages of fatty acid, terpene, and polyketide synthases for the production of bio-based gasoline, diesel and jet fuel.

The dilemma for lipid productivity in green microalgae: importance of substrate provision in improving oil yield without sacrificing growth

Rising oil prices and concerns over climate change have resulted in more emphasis on research into renewable biofuels from microalgae. Unlike plants, green microalgae have higher biomass productivity, will not compete with food and agriculture, and do not require fertile land for cultivation. However, microalgae biofuels currently suffer from high capital and operating costs due to low yields and costly extraction methods. Microalgae grown under optimal conditions produce large amounts of biomass but with low neutral lipid content, while microalgae grown in nutrient starvation accumulate high levels of neutral lipids but are slow growing. Producing lipids while maintaining high growth rates is vital for biofuel production because high biomass productivity increases yield per harvest volume while high lipid content decreases the cost of extraction per unit product. Therefore, there is a need for metabolic engineering of microalgae to constitutively produce high amounts of lipids without sacrificing growth. Substrate availability is a rate-limiting step in balancing growth and fatty acid (FA) production because both biomass and FA synthesis pathways compete for the same substrates, namely acetyl-CoA and NADPH. In this review, we discuss the efforts made for improving biofuel production in plants and microorganisms, the challenges faced in achieving lipid productivity, and the important role of precursor supply for FA synthesis. The main focus is placed on the enzymes which catalyzed the reactions supplying acetyl-CoA and NADPH.

Hydrocarbons Are Essential for Optimal Cell Size, Division, and Growth of Cyanobacteria

Cyanobacteria are intricately organized, incorporating an array of internal thylakoid membranes, the site of photosynthesis, into cells no larger than other bacteria. They also synthesize C15-C19 alkanes and alkenes, which results in substantial production of hydrocarbons in the environment. All sequenced cyanobacteria encode hydrocarbon biosynthesis pathways, suggesting an important, undefined physiological role for these compounds. Here, we demonstrate that hydrocarbon-deficient mutants of Synechococcus sp. PCC 7002 and Synechocystis sp. PCC 6803 exhibit significant phenotypic differences from wild type, including enlarged cell size, reduced growth, and increased division defects. Photosynthetic rates were similar between strains, although a minor reduction in energy transfer between the soluble light harvesting phycobilisome complex and membrane-bound photosystems was observed. Hydrocarbons were shown to accumulate in thylakoid and cytoplasmic membranes. Modeling of membranes suggests these compounds aggregate in the center of the lipid bilayer, potentially promoting membrane flexibility and facilitating curvature. In vivo measurements confirmed that Synechococcus sp. PCC 7002 mutants lacking hydrocarbons exhibit reduced thylakoid membrane curvature compared to wild type. We propose that hydrocarbons may have a role in inducing the flexibility in membranes required for optimal cell division, size, and growth, and efficient association of soluble and membrane bound proteins. The recent identification of C15-C17 alkanes and alkenes in microalgal species suggests hydrocarbons may serve a similar function in a broad range of photosynthetic organisms.

Microbial alkane production for jet fuel industry: motivation, state of the art and perspectives

Bio‐jet fuel has attracted a lot of interest in recent years and has become a focus for aircraft and engine manufacturers, oil companies, governments and researchers. Given the global concern about environmental issues and the instability of oil market, bio‐jet fuel has been identified as a promising way to reduce the greenhouse gas emissions from the aviation industry, while also promoting energy security. Although a number of bio‐jet fuel sources have been approved for manufacture, their commercialization and entry into the market is still a far way away. In this review, we provide an overview of the drivers for intensified research into bio‐jet fuel technologies, the type of chemical compounds found in bio‐jet fuel preparations and the current state of related pre‐commercial technologies. The biosynthesis of hydrocarbons is one of the most promising approaches for bio‐jet fuel production, and thus we provide a detailed analysis of recent advances in the microbial biosynthesis of hydrocarbons (with a focus on alkanes). Finally, we explore the latest developments and their implications for the future of research into bio‐jet fuel technologies.