Intrinsic anion diffusivity in lead halide perovskites is facilitated by a soft lattice

Analytical detection of the bioactive molecules dopamine, thyroxine, hydrogen peroxide, and glucose using CsPbBr3 perovskite nanocrystals

Qualitative and quantitative detection of biologically important molecules such as dopamine, thyroxine, hydrogen peroxide, and glucose, using newer and cheaper technology is of paramount importance in biology and medicine. Anion exchange in lead halide perovskites, on account of its good emission yield, facilitates the sensing of these molecules by the naked eye using ultraviolet light. Simple chemistry is used to generate chloride ions from analyte molecules. Dopamine and thyroxine have an amine functional group, which forms an adduct with an equivalent amount of volatile hydrochloric acid to yield chloride ions in solution. The reducing nature of hydrogen peroxide and glucose is used to generate chloride ions through a reaction with sodium hypochlorite in stoichiometric amounts. The emission of CsPbBr3-coated paper/glass substrates shifts to the blue region in the presence of chloride ions. This helps in the detection of the above biologically important molecules up to parts per million (ppm) levels by employing fundamental chemistry aspects and well-known anion exchange in perovskite nanocrystals. The preparation of better and more efficient sensors, which are predominantly important in science and technology, can thus be achieved by developing the above novel, cost-effective alternative sensing method.

Efficient Polycrystalline Single-Cation Perovskite Light-Emitting Diodes by Simultaneous Intracrystal and Interfacial Defect Passivation

Polycrystalline perovskite light-emitting diodes (PeLEDs) have shown great promise with high efficiency and easy processability. However, PeLEDs using single-cation polycrystalline perovskite emitters have demonstrated low efficiency due to defects within the grains and at the interfaces between the perovskite layer and the charge injection contact. Thus, simultaneous defect engineering of perovskites to suppress exciton loss within the grains and at the interfaces is crucial for achieving high efficiency in PeLEDs. Here, 1,8-octanedithiol which is a strong nucleophile, is used to increase the luminescence efficiency of a single-cation perovskite by suppressing non-radiative recombination within the grains of their polycrystalline emitter film as well as at their interface with an anode. The dithiol additive performs a multifunctional role in defect passivation, spatial confinement of excitons, and prevention of exciton quenching at the interface between the perovskite layer and the underlying hole-injection layer. Photoluminescence studies demonstrate that incorporating the dithiol additive significantly enhances the charge carrier dynamics in perovskites, resulting in an external quantum efficiency (EQE) of up to 23.46% even in a simplified PeLED that does not use a hole-injection layer. This represents the highest level of EQE achieved among devices utilizing polycrystalline single-cation perovskites.

Single-Shot Multispectral Encoding: Advancing Optical Lithography for Encryption and Spectroscopy

Most modern optical display and sensing devices utilize a limited number of spectral units within the visible range, based on human color perception. In contrast, the rapid advancement of machine-based pattern recognition and spectral analysis could facilitate the use of multispectral functional units, yet the challenge of creating complex, high-definition, and reproducible patterns with an increasing number of spectral units limits their widespread application. Here, we report a technique for optical lithography that employs a single-shot exposure to reproduce perovskite films with spatially controlled optical band gaps through light-induced compositional modulations. Luminescent patterns are designed to program correlations between spatial and spectral information, covering the entire visible spectral range. Using this platform, we demonstrate multispectral encoding patterns for encryption and multivariate optical converters for dispersive optics-free spectroscopy with high spectral resolution. The fabrication process is conducted at room temperature and can be extended to other material and device platforms.

Precise Laser-Modulated Anion Exchange on Ultraflexible Perovskite Films for Multicolor Patterns

Lead halide perovskite anion exchange reactions tend to be spontaneous and rapid. To achieve precise control of anion exchange and modulate the bandgaps of perovskites to meet the demands in full-color displays, a laser-induced liquid-phase anion exchange method is developed in this paper. CsPbBr3 perovskites embedded in a polymer matrix are converted to CsPb(BrxCl1-x)3 and CsPb(BrxI1-x)3 perovskites, realizing the shift from green fluorescence to blue and red fluorescence. By changing the laser parameters, the anion exchange extent and luminescence wavelength are precisely tuned, with the maximum tuning wavelength range of 431-696 nm. Due to the focusing properties of the laser, the spatial position of anion exchange can be precisely controlled, which is significant for realizing fast and accurate patterning without masks. Based on this method, blue patterns with different light-emitting wavelengths are fabricated. RGB three-color patterns on a single perovskite composite film are successfully prepared by further replacement of halogen ions. More importantly, the polymer matrix provides ultraflexibility and good stability for the films; even if the composite films are arbitrarily folded or repeatedly bent, they can still maintain good luminous intensity. This method will show great potential in the field of flexible, full-color displays.

Solid-State Anion Exchange Enabled by Pluggable vdW Assembly for In Situ Halide Manipulation in Perovskite Monocrystalline Film

The fabrication of perovskite single crystal-based optoelectronics with improved performance is largely hindered by limited processing techniques. Particularly, the local halide composition manipulation, which dominates the bandgap and thus the formation of heterostructures and emission of multiple-wavelength light, is realized via prevalent liquid- or gas-phase anion exchange with the utilization of lithography, while the monocrystalline nature is sacrificed due to polycrystalline transition in exchange with massive defects emerging, impeding carrier separation and transportation. Thus, a damage-free and lithography-free solid-state anion exchange strategy, aiming at in situ halide manipulation in perovskite monocrystalline film, is developed. Typically, CsPbCl3 working as medium to deliver halide is van der Waals (vdW) assembled to specific spots of CsPbBr3, followed by the removal of CsPbCl3 after anion exchange, with the halide composition in contact area modulated and monocrystalline nature of CsPbBr3 preserved. CsPbBr3-CsPbBrxCl3-x monocrystalline heterostructure has been achieved without lithography. Device based on the heterostructure shows apparent rectification behavior and improved photo-response rate. Heterostructure arrays can also be constructed with customized medium crystal. Furthermore, the halide composition can be accurately tuned to enable full coverage of visible spectra. The solid-state exchange enriches the toolbox for processing vulnerable perovskite and paves the way for the integration of monocrystalline perovskite optoelectronics.

On-Wire Design of Axial Periodic Halide Perovskite Superlattices for High-Performance Photodetection

Precise synthesis of all-inorganic lead halide perovskite nanowire heterostructures and superlattices with designable modulation of chemical compositions is essential for tailoring their optoelectronic properties. Nevertheless, controllable synthesis of perovskite nanostructure heterostructures remains challenging and underexplored to date. Here, we report a rational strategy for wafer-scale synthesis of one-dimensional periodic CsPbCl3/CsPbI3 superlattices. We show that the highly parallel array of halide perovskite nanowires can be prepared roughly as horizontally guided growth on an M-plane sapphire. A periodic patterning of the sapphire substrate enables position-selective ion exchange to obtain highly periodic CsPbCl3/CsPbI3 nanowire superlattices. This patterning is further confirmed by micro-photoluminescence investigations, which show that two separate band-edge emission peaks appear at the interface of a CsPbCl3/CsPbI3 heterojunction. Additionally, compared with the pure CsPbCl3 nanowires, photodetectors fabricated using these periodic heterostructure nanowires exhibit superior photoelectric performance, namely, high ION/IOFF ratio (104), higher responsivity (49 A/W), and higher detectivity (1.51 × 1013 Jones). Moreover, a spatially resolved visible image sensor based on periodic nanowire superlattices is demonstrated with good imaging capability, suggesting promising application prospects in future photoelectronic imaging systems. All these results based on the periodic CsPbCl3/CsPbI3 nanowire superlattices provides an attractive material platform for integrated perovskite devices and circuits.

Hot-Injection Synthesis of Cesium Lead Halide Perovskite Nanowires with Tunable Optical Properties

Metal halide perovskite semiconductors have emerged as promising materials for various optoelectronic applications due to their unique crystal structure and outstanding properties. Among different forms, perovskite nanowires (NWs) offer distinct advantages, including a high aspect ratio, superior crystallinity, excellent light absorption, and carrier transport properties, as well as unique anisotropic luminescence properties. Understanding the formation mechanism and structure-property relationship of perovskite NWs is crucial for exploring their potential in optoelectronic devices. In this study, we successfully synthesized all-inorganic halide perovskite NWs with high aspect ratios and an orthorhombic crystal phase using the hot-injection method with controlled reaction conditions and surface ligands. These NWs exhibit excellent optical and electrical properties. Moreover, precise control over the halogen composition through a simple anion exchange process enables the tuning of the bandgap, leading to fluorescence emission, covering a wide range of colors across the visible spectrum. Consequently, these perovskite NWs hold great potential for efficient energy conversion and catalytic applications in photoelectrocatalysis.

Spatially Resolved Anion Diffusion and Tunable Waveguides in Bismuth Halide Perovskites

Bismuth halide perovskites are widely regarded as nontoxic alternatives to lead halide perovskites for optoelectronics and solar energy harvesting applications. With a tailorable composition and intriguing optical properties, bismuth halide perovskites are also promising candidates for tunable photonic devices. However, robust control of the anion composition in bismuth halide perovskites remains elusive. Here, we established chemical vapor deposition and anion exchange protocols to synthesize bismuth halide perovskite nanoflakes with controlled dimensions and variable compositions. In particular, we demonstrated the gradient bromide distribution by controlling the anion exchange and diffusion processes, which is spatially resolved by time-of-flight secondary ion mass spectrometry. Moreover, the optical waveguiding properties of bismuth halide perovskites can be modulated by flake thicknesses and anion compositions. With a unique gradient anion distribution and controllable optical properties, bismuth halide perovskites provide new possibilities for applications in optoelectronic devices and integrated photonics.

Two-dimensional lead halide perovskite lateral homojunctions enabled by phase pinning

Two-dimensional organic-inorganic hybrid halide perovskites possess diverse structural polymorphs with versatile physical properties, which can be controlled by order-disorder transition of the spacer cation, making them attractive for constructing semiconductor homojunctions. Here, we demonstrate a space-cation-dopant-induced phase stabilization approach to creating a lateral homojunction composed of ordered and disordered phases within a two-dimensional perovskite. By doping a small quantity of pentylammonium into (butylammonium)2PbI4 or vice versa, we effectively suppress the ordering transition of the spacer cation and the associated out-of-plane octahedral tilting in the inorganic framework, resulting in phase pining of the disordered phase when decreasing temperature or increasing pressure. This enables epitaxial growth of a two-dimensional perovskite homojunction with tunable optical properties under temperature and pressure stimuli, as well as directional exciton diffusion across the interface. Our results demonstrate a previously unexplored strategy for constructing two-dimensional perovskite heterostructures by thermodynamic tuning and spacer cation doping.

Nonequilibrium Anion Detection in Solid-Contact Ion-Selective Electrodes

Low-cost and portable nitrate and phosphate sensors are needed to improve farming efficiency and reduce environmental and economic impact arising from the release of these nutrients into waterways. Ion selective electrodes (ISEs) could provide a convenient platform for detecting nitrate and phosphate, but existing ionophore-based nitrate and phosphate selective membrane layers used in ISEs are high cost, and ISEs using these membrane layers suffer from long equilibration time, reference potential drift, and poor selectivity. In this work, we demonstrate that constant current operation overcomes these shortcomings for ionophore-based anion-selective ISEs through a qualitatively different response mechanism arising from differences in ion mobility rather than differences in ion binding thermodynamics. We develop a theoretical treatment of phase boundary potential and ion diffusion that allows for quantitative prediction of electrode response under applied current. We also demonstrate that under pulsed current operation, we can create functional solid-contact ISEs using lower-cost molecularly imprinted polymers (MIPs). MIP-based nitrate sensors provide comparable selectivity against chloride to costlier ionophore-based sensors and exhibit >100,000 times higher selectivity against perchlorate. Likewise, MIP-based solid contact ion-selective electrode phosphate sensors operated under pulsed current provide competitive selectivity against chloride, nitrate, perchlorate, and carbonate anions. The theoretical treatment and conceptual demonstration of pulsed-current ISE operation we report will inform the development of new materials for membrane layers in ISEs based on differences in ion mobility and will allow for improved ISE sensor designs.

Kinetic Process with Anti-Frenkel Disorder in a CsPbI3 Perovskite

Halide perovskites are rich in ionic diffusion phenomena due to their low activation energy. The soft lead iodide lattice can, in theory, endow the system with more complex defect collaborative motions. In this work, we systematically investigated the hopping mechanics of iodide interstitials with respect to various defect behaviors, such as anti-Frenkel disorder creation and annihilation. We found that the existence of iodide vacancies and interstitials can effectively lower the creation barrier of additional anti-Frenkel disorder in the halide perovskite. The free energy barriers for generating additional Frenkel defect pairs vary from 0.25 to 0.43 eV, in the proximity of those of the original iodide defects at 300 K. This finding suggests that the spontaneous creation of a specific level of anti-Frenkel disorder facilitates long-range annihilation and defect hopping processes.

Monitoring Phase Separation and Dark Recovery in Mixed Halide Perovskite Clusters and Single Crystals Using In Situ Spectromicroscopy

Mixed halide perovskites (MHPs) are a group of semiconducting materials with promising applications in optoelectronics and photovoltaics, whose bandgap can be altered by adjusting the halide composition. However, the current challenge is to stabilize the light-induced halide separation, which undermines the device's performance. Herein we track down the phase separation dynamics of CsPbBr1.2I1.8 MHP single cubic nanocrystals (NCs) and clusters as a function of time by in situ fluorescence spectromicroscopy. The particles were sorted into groups 1 and 2 using initial photoluminescence intensities. The phase separation followed by recovery kinetics under dark and photo blinking analysis suggests that group 1 behaved more like single NCs and group 2 behaved like clusters. Under the 0.64 W/cm2 laser illumination, the phase shifts for single NCs are 3.4 ± 1.9 nm. The phase shifts are linearly correlated with the initial photoluminescence intensities of clusters, suggesting possible interparticle halide transportation.

Halide Ion Mixing across Colloidal 2D Ruddlesden-Popper Perovskites: Implication of Spacer Ligand on Mixing Kinetics

Halide ion exchange seen in metal halide perovskites provide a substantial opportunity to control their halide composition and corresponding optoelectronic properties. Halide ion mixing across colloidal 3D perovskite nanocrystals have been extensively studied while the mixing within colloidal 2D counterparts remain underexplored. In this study, the halide ion exchange kinetics across colloidally stable 2D Ruddlesden-Popper layered bromide (Br) and iodide (I) perovskites using two different spacer ligands such as aromatic phenethylammonium (PEA) versus linear butyammonium (BA) is demonstrated. The halide exchange kinetic rate constant (k), as determined by tracking time-dependent absorbance changes, indicates that Br/I halide mixing in 2D PEA-based perovskites (2.7 × 10-3 min-1 ) occurs at an order of magnitude slower than in 2D BA-based perovskites (3.3 × 10-2 min-1 ). Concentration (≈1 mM to 100 mM) and temperature-dependent (50 to 80 °C) kinetic studies further allow for the determination of activation barrier for halide ion mixing across the 2D layered perovskites with 75.2 ± 4.4 kJ mol-1 (2D PEA) and 57.8 ± 7.8 kJ mol-1 (2D BA), respectively. The activation energy reveals that the type of spacer cations plays a crucial role in controlling the halide ion mobility and halide stability due mainly to the internal ligand chemical interaction within 2D structures.

Structural, electronic, optical, elastic, thermodynamic and thermal transport properties of Cs2AgInCl6 and Cs2AgSbCl6 double perovskite semiconductors using a first-principles study

In this study, we employ the framework of first-principles density functional theory (DFT) computations to investigate the physical, electrical, bandgap and thermal conductivity of Cs2AgInCl6-CAIC (type I) and Cs2AgSbCl6-CASC (type II) using the GGA-PBE method. CAIC possesses a direct band gap energy of 1.812 eV, while CASC demonstrates an indirect band gap energy of 0.926 eV. The CAIC and CASC exhibit intriguingly reduced thermal conductivity, which can be attributed to the notable reduction in their respective Debye temperatures, measuring 182 K and 135 K, respectively. The Raman active modes computed under ambient conditions have been compared with real-world data, showing excellent agreement. The thermal conductivity values of CAIC and CASC compounds exhibit quantum mechanical characteristics, with values of 0.075 and 0.25 W m-1 K-1, respectively, at 300 K. It is foreseen that these outcomes will generate investigations concerning phosphors and diodes that rely on single emitters, with the aim of advancing lighting and display technologies in the forthcoming generations.

Field-Induced Transport Anisotropy in Single-Crystalline All-Inorganic Lead-Halide Perovskite Nanowires

The dynamic crystal lattice of halide perovskites facilitates the coupled transport of ions and electrons, offering innovative concepts in semiconductor iontronic devices that surpass solar cell applications. However, a comprehensive understanding of the intricacies of coupled ionic and electronic transport at the microscale remains ambiguous, owing to the inhomogeneity in ploy-crystalline perovskite thin films. In this work, we employed one-dimensional (1D) single-crystalline CsPbBr3 nanowires (NWs) to investigate the electric field induced ionic transport. Upon poling by an external bias, the previously uniform NW exhibits highly anisotropic ionic transport, which is identified as the origin of the giant switchable photovoltaic effect by spatially resolved scanning photocurrent microscopy. The subsequent ultrafast scanning photoluminescence (PL) microscopy measurements demonstrate significant localization of photocarriers near one terminal of the device, which is attributed to the accumulation of halogen vacancies. In addition, thanks to the enhancement of the local electric field, the poled device shows a 10-fold increase of photoresponse speed. Our findings favor the scale-down of perovskite devices to the submicrometer scale, extending their applications in self-powered iontronic and optoelectronic devices.

Highly Anisotropic Polarization Induced by Electrical Poling in Single-Crystalline All-Inorganic Perovskite Nanoplates

The coupled ionic and electronic transport in halide perovskites opens up new possibilities for semiconductor iontronic devices beyond solar cells. Nevertheless, the fundamental understanding of ionic behavior at the microscale remains vague, largely because of the inhomogeneity in polycrystalline thin films. Here, we show that the ion dynamics in single-crystalline perovskite nanoplates (NPs) are significantly different and that an external bias may induce highly anisotropic ionic transport in the NPs, thereby leading to a greatly enhanced local electric field. Using modified scanning photocurrent microscopy (SPCM), the origin of the photocurrent is pinpointed to the cathode region of the NP device, where subsequent energy dispersive spectroscopy (EDS) characterization confirms a large accumulation of halogen vacancies. In addition, the Kelvin probe force microscopy (KPFM) measurement demonstrates a strong built-in electric field within a submicron length near the cathode, which alters the local electronic structure for efficient photo carrier separation. Such field-induced ionic behavior deepens the understanding of ion dynamics in perovskites and promotes scale-down of perovskite micro- and nanoiontronic and ion-optoelectronic devices.

Nanoscale X-ray Imaging of Composition and Ferroelastic Domains in Heterostructured Perovskite Nanowires: Implications for Optoelectronic Devices

Metal halide perovskites (MHPs) have garnered significant interest as promising candidates for nanoscale optoelectronic applications due to their excellent optical properties. Axially heterostructured CsPbBr3-CsPb(Br(1-x)Clx)3 nanowires can be produced by localized anion exchange of pregrown CsPbBr3 nanowires. However, characterizing such heterostructures with sufficient strain and real space resolution is challenging. Here, we use nanofocused scanning X-ray diffraction (XRD) and X-ray fluorescence (XRF) with a 60 nm beam to investigate a heterostructured MHP nanowire as well as a reference CsPbBr3 nanowire. The nano-XRD approach gives spatially resolved maps of composition, lattice spacing, and lattice tilt. Both the reference and exchanged nanowire show signs of diverse types of ferroelastic domains, as revealed by the tilt maps. The chlorinated segment shows an average Cl composition of x = 66 and x = 70% as measured by XRD and XRF, respectively. The XRD measurements give a much more consistent result than the XRF ones. These findings are consistent with photoluminescence measurements, showing x = 73%. The nominally unexchanged segment also has a small concentration of Cl, as observed with all three methods, which we attribute to diffusion after processing. These results highlight the need to prevent such unwanted processes in order to fabricate optoelectronic devices based on MHP heterostructures.

Multislip-enabled morphing of all-inorganic perovskites

All-inorganic lead halide perovskites (CsPbX3, X = Cl, Br or I) are becoming increasingly important for energy conversion and optoelectronics because of their outstanding performance and enhanced environmental stability. Morphing perovskites into specific shapes and geometries without damaging their intrinsic functional properties is attractive for designing devices and manufacturing. However, inorganic semiconductors are often intrinsically brittle at room temperature, except for some recently reported layered or van der Waals semiconductors. Here, by in situ compression, we demonstrate that single-crystal CsPbX3 micropillars can be substantially morphed into distinct shapes (cubic, L and Z shapes, rectangular arches and so on) without localized cleavage or cracks. Such exceptional plasticity is enabled by successive slips of partial dislocations on multiple [Formula: see text] systems, as evidenced by atomic-resolution transmission electron microscopy and first-principles and atomistic simulations. The optoelectronic performance and bandgap of the devices were unchanged. Thus, our results suggest that CsPbX3 perovskites, as potential deformable inorganic semiconductors, may have profound implications for the manufacture of advanced optoelectronics and energy systems.

CsPbCl3 → CsPbI3 Exchange in Perovskite Nanocrystals Proceeds through a Jump-the-Gap Reaction Mechanism

Halide exchange is a popular strategy to tune the properties of CsPbX3 nanocrystals after synthesis. However, while Cl → Br and Br → I exchanges proceed through the formation of stable mixed-halide nanocrystals, the Cl ⇌ I exchange is more elusive. Indeed, the large size difference between chloride and iodide ions causes a miscibility gap in the CsPbCl3-CsPbI3 system, preventing the isolation of stable CsPb(ClxI1-x)3 nanocrystals. Yet, previous works have claimed that a full CsPbCl3 → CsPbI3 exchange can be achieved. Even more interestingly, interrupting the exchange prematurely yields a mixture of CsPbCl3 and CsPbI3 nanocrystals that coexist without undergoing further transformation. Here, we investigate the reaction mechanism of CsPbCl3 → CsPbI3 exchange in nanocrystals. We show that the reaction proceeds through the early formation of iodide-doped CsPbCl3 nanocrystals covered by a monolayer shell of CsI. These nanocrystals then leap over the miscibility gap between CsPbCl3 and CsPbI3 by briefly transitioning to short-lived and nonrecoverable CsPb(ClxI1-x)3 nanocrystals, which quickly expel the excess chloride and turn into the chloride-doped CsPbI3 nanocrystals found in the final product.

High-entropy halide perovskite single crystals stabilized by mild chemistry

Although high-entropy materials are excellent candidates for a range of functional materials, their formation traditionally requires high-temperature synthetic procedures of over 1,000 °C and complex processing techniques such as hot rolling1-5. One route to address the extreme synthetic requirements for high-entropy materials should involve the design of crystal structures with ionic bonding networks and low cohesive energies. Here we develop room-temperature-solution (20 °C) and low-temperature-solution (80 °C) synthesis procedures for a new class of metal halide perovskite high-entropy semiconductor (HES) single crystals. Due to the soft, ionic lattice nature of metal halide perovskites, these HES single crystals are designed on the cubic Cs2MCl6 (M=Zr4+, Sn4+, Te4+, Hf4+, Re4+, Os4+, Ir4+ or Pt4+) vacancy-ordered double-perovskite structure from the self-assembly of stabilized complexes in multi-element inks, namely free Cs+ cations and five or six different isolated [MCl6]2- anionic octahedral molecules well-mixed in strong hydrochloric acid. The resulting single-phase single crystals span two HES families of five and six elements occupying the M-site as a random alloy in near-equimolar ratios, with the overall Cs2MCl6 crystal structure and stoichiometry maintained. The incorporation of various [MCl6]2- octahedral molecular orbitals disordered across high-entropy five- and six-element Cs2MCl6 single crystals produces complex vibrational and electronic structures with energy transfer interactions between the confined exciton states of the five or six different isolated octahedral molecules.

Adjusted Bulk and Interfacial Properties in Highly Stable Semitransparent Perovskite Solar Cells Fabricated by Thermocompression Bonding between Perovskite Layers

In order to shield perovskite solar cells (PSCs) from extrinsic degradation factors and ensure long-term stability, effective encapsulation technology is indispensable. Here, a facile process is developed to create a glass-glass encapsulated semitransparent PSC using thermocompression bonding. From quantifying the interfacial adhesion energy and considering the power conversion efficiency of devices, it is confirmed that bonding between perovskite layers formed on a hole transport layer (HTL)/indium-doped tin oxide (ITO) glass and an electron transport layer (ETL)/ITO glass can offer an excellent lamination method. The PSCs fabricated through this process have only buried interfaces between the perovskite layer and both charge transport layers as the perovskite surface is transformed into bulk. The thermocompression process leads the perovskite to have larger grains and smoother, denser interfaces, thereby not only reducing defect and trap density but also suppressing ion migration and phase segregation under illumination. In addition, the laminated perovskite demonstrates enhanced stability against water. The self-encapsulated semitransparent PSCs with a wide-band-gap perovskite (Eg ∼ 1.67 eV) demonstrate a power conversion efficiency of 17.24% and maintain long-term stability with PCE > ∼90% in the 85 °C shelf test for over 3000 h and with PCE > ∼95% under AM 1.5 G, 1-sun illumination in an ambient atmosphere for over 600 h.

Effects of drying time on the formation of merged and soft MAPbI3 grains and their photovoltaic responses

The grain sizes of soft CH₃NH₃PbI₃ (MAPbI₃) thin films and the atomic contact strength at the MAPbI₃/P3CT-Na interface are manipulated by varying the drying time of the saturated MAPbI₃ precursor solutions, which influences the device performance and lifespan of the resultant inverted perovskite photovoltaic cells. The atomic-force microscopy images, cross-sectional scanning electron microscopy images, photoluminescence spectra and absorbance spectra show that the increased short-circuit current density (J _SC) and increased fill factor (FF) are mainly due to the formation of merged MAPbI₃ grains. Besides, the open-circuit voltage (V _OC) of the encapsulated photovoltaic cells largely increases from 1.01 V to 1.15 V, thereby increasing the power conversion efficiency from 17.89% to 19.55% after 30 days, which can be explained as due to the increased carrier density of the MAPbI₃ crystalline thin film. It is noted that the use of the optimized drying time during the spin coating process results in the formation of merged MAPbI₃ grains while keeping the contact quality at the MAPbI₃/P3CT-Na interface, which boosts the device performance and lifespan of the resultant perovskite photovoltaic cells.

Mapping the pathways of photo-induced ion migration in organic-inorganic hybrid halide perovskites

Organic-inorganic hybrid perovskites exhibiting exceptional photovoltaic and optoelectronic properties are of fundamental and practical interest, owing to their tunability and low manufacturing cost. For practical applications, however, challenges such as material instability and the photocurrent hysteresis occurring in perovskite solar cells under light exposure need to be understood and addressed. While extensive investigations have suggested that ion migration is a plausible origin of these detrimental effects, detailed understanding of the ion migration pathways remains elusive. Here, we report the characterization of photo-induced ion migration in perovskites using in situ laser illumination inside a scanning electron microscope, coupled with secondary electron imaging, energy-dispersive X-ray spectroscopy and cathodoluminescence with varying primary electron energies. Using methylammonium lead iodide and formamidinium lead iodide as model systems, we observed photo-induced long-range migration of halide ions over hundreds of micrometers and elucidated the transport pathways of various ions both near the surface and inside the bulk of the samples, including a surprising finding of the vertical migration of lead ions. Our study provides insights into ion migration processes in perovskites that can aid perovskite material design and processing in future applications.

From Heterostructures to Solid-Solutions: Structural Tunability in Mixed Halide Perovskites

The stability, reliability, and performance of halide-perovskite-based devices depend upon the structure, composition, and particle size of the device-enabling materials. Indeed, the degree of ion mixing in multicomponent perovskite crystals, although challenging to control, is a key factor in determining properties. Herein, an emerging method termed evaporation-crystallization polymer pen lithography is used to synthesize and systematically study the degree of ionic mixing of Cs_0.5 FA_0.5 PbX₃ (FA = formamidinium; X = halide anion, ABX₃ ) crystals, as a function of size, temperature, and composition. These experiments have led to the discovery of a heterostructure morphology where the A-site cations, Cs and FA, are segregated into the core and edge layers, respectively. Simulation and experimental results indicate that the heterostructures form as a consequence of a combination of both differences in solubility of the two ions in solution and the enthalpic preference for Cs-FA ion segregation. This preference for segregation can be overcome to form a solid-solution by decreasing crystal size (<60 nm) or increasing temperature. Finally, these tools are utilized to identify and synthesize solid-solution nanocrystals of Cs_0.5 FA_0.5 Pb(Br/I)₃ that significantly suppress photoinduced anion migration compared to their bulk counterparts, offering a route to deliberately designed photostable optoelectronic materials.

Halide Perovskite Single Crystals and Nanocrystal Films as Electron Donor-Acceptor Heterojunctions

Halide perovskites are materials for future optical displays and solar cells. Electron donor-acceptor perovskite heterostructures with distinguishing halide compositions are promising for transporting and harvesting photogenerated charge carriers. Combined e-beam lithography and anion exchange are promising to develop such heterostructures but challenging to prepare multiple heterojunctions at desired locations in single crystals. We demonstrate swift laser trapping-assisted band gap engineering at the desired locations in MAPbBr₃ microrods, microplates, or nanocrystal thin films. The built-in donor-acceptor double and multi-heterojunction structures let us transport and trap photogenerated charge carriers from wide-band gap bromide to narrow-band gap iodide domains. We discuss the charge carrier transport and trapping mechanisms from the viewpoints of engineered bands and band continuity. This work offers a convenient method for designing single-, double- and multi-heterojunction donor-acceptor halide perovskites for photovoltaic, photonic, and electronic applications.

Metal Halide Perovskite Nanowires: Controllable Synthesis, Mechanism, and Application in Optoelectronic Devices

Metal halide perovskites are promising energy materials because of their high absorption coefficients, long carrier lifetimes, strong photoluminescence, and low cost. Low-dimensional halide perovskites, especially one-dimensional (1D) halide perovskite nanowires (NWs), have become a hot research topic in optoelectronics owing to their excellent optoelectronic properties. Herein, we review the synthetic strategies and mechanisms of halide perovskite NWs in recent years, such as hot injection, vapor phase growth, selfassembly, and solvothermal synthesis. Furthermore, we summarize their applications in optoelectronics, including lasers, photodetectors, and solar cells. Finally, we propose possible perspectives for the development of halide perovskite NWs.

Light-Induced Phase Segregation Evolution of All-Inorganic Mixed Halide Perovskites

Light-induced phase segregation in mixed halide perovskites is a major roadblock for commercialization of optoelectronics utilizing these materials. We investigate the phenomenon in a model material system consisting of only surfaces and the bulk of a single-crystalline-like microplate. We utilize environmental in-situ time-dependent photoluminescence spectroscopy to observe the bandgap evolution of phase segregation under illumination. This enables analysis of the evolution of the iodide-rich phase composition as a function of the environment (i.e., surface defects) and carrier concentration. Our study provides microscopic insights into the relationship among photocarrier generations, surface structural defects, and subsequently iodide ion migrations that result in the complex evolution of phase segregation. We elucidate the significance of surface defects with respect to the evolution of phase segregation, which may provide new perspectives for modulating ion migration by engineering of defects and carrier concentrations.

Perovskite Nanowire Laser for Hydrogen Chloride Gas Sensing

Detection of hazardous volatile organic and inorganic species is a crucial task for addressing human safety in the chemical industry. Among these species, there are hydrogen halides (HX, X = Cl, Br, I) vastly exploited in numerous technological processes. Therefore, the development of a cost-effective, highly sensitive detector selective to any HX gas is of particular interest. Herein, we demonstrate the optical detection of hydrogen chloride gas with solution-processed halide perovskite nanowire lasers grown on a nanostructured alumina substrate. An anion exchange reaction between a CsPbBr3 nanowire and vaporized HCl molecules results in the formation of a structure consisting of a bromide core and thin mixed-halide CsPb(Cl,Br)3 shell. The shell has a lower refractive index than the core does. Therefore, the formation and further expansion of the shell reduce the field confinement for experimentally observed laser modes and provokes an increase in their frequency. This phenomenon is confirmed by the coherency of the data derived from XPS spectroscopy, EDX analysis, in situ XRD experiments, HRTEM images, and fluorescent microspectroscopy, as well as numerical modeling for Cl- ion diffusion and the shell-thickness-dependent spectral position of eigenmodes in a core-shell perovskite nanowire. The revealed optical response allows the detection of HCl molecules in the 5-500 ppm range. The observed spectral tunability of the perovskite nanowire lasers can be employed not only for sensing but also for their precise spectral tuning.

A mechanistic study of the dopant-induced breakdown in halide perovskites using solid state energy storage devices

Doping halide perovskites (HPs) with extrinsic species, such as alkali metal ions, plays a critical, albeit often elusive role in optimising optoelectronic devices. Here, we use solid state lithium ion battery inspired devices with a polyethylene oxide-based polymer electrolyte to dope HPs controllably with lithium ions. We perform a suite of operando material analysis techniques while dynamically varying Li doping concentrations. We determine and quantify three doping regimes; a safe regime, with doping concentrations of <10²⁰ cm^-3 (2% Li : Pb mol%) in which the HP may be modified without detrimental effect to its structure; a minor decomposition regime, in which the HP is partially transformed but remains the dominant species; and a major decomposition regime in which the perovskite is superseded by new phases. We provide a mechanistic description of the processes mediating between each stage and find evidence for metallic Pb⁽⁰⁾, LiBr and LiPbBr₂ as final decomposition products. Combining results from synchrotron X-ray diffraction measurements with in situ photoluminescence and optical reflection microscopy studies, we distinguish the influences of free charge carriers and intercalated lithium independently. We find that the charge density is equally as important as the geometric considerations of the dopant species and thereby provide a quantitative framework upon which the future design of doped-perovskite energy devices should be based.

Photo-induced macro/mesoscopic scale ion displacement in mixed-halide perovskites: ring structures and ionic plasma oscillations

Contrary to the common belief that the light-induced halide ion segregation in a mixed halide alloy occurs within the illuminated area, we find that the Br ions released by light are expelled from the illuminated area, which generates a macro/mesoscopic size anion ring surrounding the illuminated area, exhibiting a photoluminescence ring. This intriguing phenomenon can be explained as resulting from two counter-balancing effects: the outward diffusion of the light-induced free Br ions and the Coulombic force between the anion deficit and surplus region. Right after removing the illumination, the macro/mesoscopic scale ion displacement results in a built-in voltage of about 0.4 V between the ring and the center. Then, the displaced anions return to the illuminated area, and the restoring force leads to a damped ultra-low-frequency oscillatory ion motion, with a period of about 20-30 h and lasting over 100 h. This finding may be the first observation of an ionic plasma oscillation in solids. Our understanding and controlling the "ion segregation" demonstrate that it is possible to turn this commonly viewed "adverse phenomenon" into novel electronic applications, such as ionic patterning, self-destructive memory, and energy storage.

Ligands Mediate Anion Exchange between Colloidal Lead-Halide Perovskite Nanocrystals

The soft lattice of lead-halide perovskite nanocrystals (NCs) allows tuning their optoelectronic characteristics via anion exchange by introducing halide salts to a solution of perovskite NCs. Similarly, cross-anion exchange can occur upon mixing NCs of different perovskite halides. This process, though, is detrimental for applications requiring perovskite NCs with different halides in close proximity. We study the effects of various stabilizing surface ligands on the kinetics of the cross-anion exchange reaction, comparing zwitterionic and ionic ligands. The kinetic analysis, inspired by the "cage effect" for solution reactions, showcases a mechanism where the surface capping ligands act as anion carriers that diffuse to the NC surface, forming an encounter pair enclosed by the surrounding ligands that initiates the anion exchange process. The zwitterionic ligands considerably slow down the cross-anion exchange process, and while they do not fully inhibit it, they confer improved stability alongside enhanced solubility relevant for various applications.

Anion-Exchange Driven Phase Transition in CsPbI3 Nanowires for Fabricating Epitaxial Perovskite Heterojunctions

Anion-exchange in halide perovskites provides a unique pathway of bandgap engineering for fabricating heterojunctions in low-cost photovoltaics and optoelectronics. However, it remains challenging to achieve robust and sharp perovskite heterojunctions, due to the spontaneous anion interdiffusion across the heterojunction in 3D perovskites. Here, it is shown that the anionic behavior in 1D perovskites is fundamentally different, that the anion exchange can readily drive an indirect-to-direct bandgap phase transition in CsPbI₃ nanowires (NWs) and greatly lower the phase transition temperature. In addition, the heterojunction created by phase transition is epitaxial in nature, and its chemical composition can be precisely controlled upon postannealing. Further study of the phase transition dynamics reveals a threshold-dominating anion exchange mechanism in these 1D NWs rather than the gradient-dominating mechanism in 3D systems. The results provide important insights into the ionic behavior in halide perovskites, which is beneficial for applications in solar cells, light-emitting diodes (LEDs), and other semiconductor devices.

Electrode Engineering in Halide Perovskite Electronics: Plenty of Room at the Interfaces

Contact engineering is a prerequisite for achieving desirable functionality and performance of semiconductor electronics, which is particularly critical for organic-inorganic hybrid halide perovskites due to their ionic nature and highly reactive interfaces. Although the interfaces between perovskites and charge-transporting layers have attracted lots of attention due to the photovoltaic and light-emitting diode applications, achieving reliable perovskite/electrode contacts for electronic devices, such as transistors and memories, remains as a bottleneck. Herein, a critical review on the elusive nature of perovskite/electrode interfaces with a focus on the interfacial electrochemistry effects is presented. The basic guidelines of electrode selection are given for establishing non-polarized interfaces and optimal energy level alignment for perovskite materials. Furthermore, state-of-the-art strategies on interface-related electrode engineering are reviewed and discussed, which aim at achieving ohmic transport and eliminating hysteresis in perovskite devices. The role and multiple functionalities of self-assembled monolayers that offer a unique approach toward improving perovskite/electrode contacts are also discussed. The insights on electrode engineering pave the way to advancing stable and reliable perovskite devices in diverse electronic applications.

In-situ ellipsometry measurements on the halide phase segregation of mixed halide lead perovskites

Methylammonium lead iodide bromides MAPb(Br_xI_1‐x)₃ are a class of mixed halide lead perovskites, materials that offer high‐power conversion efficiencies and bandgap tunability. For these reasons, they are a promising absorber material for future solar cells, although their use is still limited due to several factors. The reversible phase segregation under even low light intensities is one of them, lowering the effective bandgap due to local segregation into iodide‐rich and bromide‐rich phases. While several studies have been done to illuminate the mechanism and suppression of phase segregation, challenges remain to understand its kinetics. We obtained dynamic ellipsometric measurements from x=0.5 mixed halide lead perovskite thin films protected by a polystyrene layer under green laser light with a power density of ∼11 W/cm². Time constants between 1.7(±0.7)×10⁻³ s⁻¹ for the segregation and 1.5(±0.6)×10⁻⁴ s⁻¹ for recovery were calculated. The phase segregation rate constants are surprisingly two orders of magnitude slower than and the recovery rate is consistent with those measured using photoluminescence methods under similar conditions. These results confirm a concern in the literature about the complexity in the phase separation kinetics measured from photoluminescence. We expect ellipsometry to serve as a complementary technique to other spectroscopies in studying mixed‐halide lead perovskites phase segregation in the future.

Atomic-Level Description of Thermal Fluctuations in Inorganic Lead Halide Perovskites

A comprehensive microscopic description of thermally induced distortions in lead halide perovskites is crucial for their realistic applications, yet still unclear. Here, we quantify the effects of thermal activation in CsPbBr₃ nanocrystals across length scales with atomic-level precision, and we provide a framework for the description of phase transitions therein, beyond the simplistic picture of unit-cell symmetry increase upon heating. The temperature increase significantly enhances the short-range structural distortions of the lead halide framework as a consequence of the phonon anharmonicity, which causes the excess free energy surface to change as a function of temperature. As a result, phase transitions can be rationalized via the soft-mode model, which also describes displacive thermal phase transitions in oxide perovskites. Our findings allow to reconcile temperature-dependent modifications of physical properties, such as changes in the optical band gap, that are incompatible with the perovskite time- and space-average structures.

Perovskite-Compatible Electron-Beam-Lithography Process Based on Nonpolar Solvents for Single-Nanowire Devices

Metal halide perovskites (MHPs) have been studied intensely as the active material for optoelectronic devices. Lithography methods for perovskites remain limited because of the solubility of perovskites in polar solvents. Here, we demonstrate an electron-beam-lithography process with a poly(methyl methacrylate) resist based on the nonpolar solvents o-xylene, hexane, and toluene. Features down to 50 nm size are created, and photoluminescence of CsPbBr₃ nanowires exhibits no degradation. We fabricate metal contacts to single CsPbBr₃ nanowires, which show a strong photoresponsivity of 0.29 A W^-1. The presented method is an excellent tool for nanoscale MHP science and technology, allowing for the fabrication of complex nanostructures.

Controlling the Phase Transition in CsPbI3 Nanowires

Cesium lead iodide (CsPbI₃) is a promising semiconductor with a suitable band gap for optoelectronic devices. CsPbI₃ has a metastable perovskite phase that undergoes a phase transition into an unfavorable nonperovskite phase in an ambient environment. This phase transition changes the optoelectronic properties of CsPbI₃ and hinders its potential for device applications. Therefore, it is of central importance to understand the kinetics of such instability and develop strategies to control and stabilize the perovskite phase. Here, we use ultralong CsPbI₃ nanowires as a model platform to investigate the phase transition kinetics. Our results depict the role of environmental stressors (moisture and temperature) in controlling the phase transition dynamics of CsPbI₃, which can serve as guiding principles for future phase transition studies and the design of related photovoltaics. Furthermore, we demonstrate the controllability of phase propagation on individual nanowires by varying the moisture level and temperature.

Halide Segregation in Mixed Halide Perovskites: Visualization and Mechanisms

Photoinduced halide segregation in mixed halide perovskites is an intriguing phenomenon and simultaneously a stability issue. In-depth probing this effect and unveiling the underpinning mechanisms are of great interest and significance. This article reviews the progress in visualized investigation of halide segregation, especially light-induced, by means of spatially-resolved imaging techniques. Furthermore, the current understanding of photoinduced phase separation based on several possible mechanisms is summarized and discussed. Finally, the remained open questions and future outlook in this field are outlined.

Structure and Surface Passivation of Ultrathin Cesium Lead Halide Nanoplatelets Revealed by Multilayer Diffraction

The research on two-dimensional colloidal semiconductors has received a boost from the emergence of ultrathin lead halide perovskite nanoplatelets. While the optical properties of these materials have been widely investigated, their accurate structural and compositional characterization is still challenging. Here, we exploited the natural tendency of the platelets to stack into highly ordered films, which can be treated as single crystals made of alternating layers of organic ligands and inorganic nanoplatelets, to investigate their structure by multilayer diffraction. Using X-ray diffraction alone, this method allowed us to reveal the structure of ∼12 Å thick Cs-Pb-Br perovskite and ∼25 Å thick Cs-Pb-I-Cl Ruddlesden-Popper nanoplatelets by precisely measuring their thickness, stoichiometry, surface passivation type and coverage, as well as deviations from the crystal structures of the corresponding bulk materials. It is noteworthy that a single, readily available experimental technique, coupled with proper modeling, provides access to such detailed structural and compositional information.

Strategies for chemical vapor deposition of two-dimensional organic-inorganic halide perovskites

Two-dimensional (2D) organic-inorganic halide perovskites (OIHPs) with an alternating stacked structure of an organic layer and an inorganic layer draw significant attention for photovoltaics, multiple quantum-well, and passivation of three-dimensional perovskites. Although the low-cost and simple spin-coating process of these materials offers a vast platform to study fundamental properties and help them achieve rapid progress in electronics and optoelectronics, chemical vapor deposition (CVD) growth is also necessary for large-area, epitaxial, selective, and conformal growth. Here, one-step CVD strategies for 2D OIHP growth are proposed, and the growth trends depending on the precursor and substrate conditions are discussed. We report a CVD-grown nontoxic, lead-free 2D tin-OIHP flake to show the system offering a universal route to synthesize perovskite crystals based on arbitrary organic and inorganic components.

Stabilization of Mixed-Halide Lead Perovskites Under Light by Photothermal Effects

Mixed-halide lead perovskites (MHLPs) are semiconductor materials with bandgaps that are tunable across the visible spectrum and have seen promising applications in photovoltaics and optoelectronics. However, their segregation into phases with enriched halide components, under resonant light illumination and/or electric field, have hindered their practical applications. Herein, we demonstrate the stabilization of the MHLP photoluminescence (PL) peak as a function of their excitation intensities. This effect is associated with the phase segregation of MHLPs and their subsequent remixing by photothermal heating. We conclude that the balance between these opposing processes dictates the equilibrium PL peak of the MHLPs. The findings in this work could serve as a potential approach to obtain MHLP with stable emission peaks under operating conditions.

Copper-doping defect-lowered perovskite nanosheets for deep-blue light-emitting diodes

Mixed-halide blue perovskites CsPb(Br/Cl)₃ are considered promising candidates for developing efficient deep-blue perovskite light-emitting diodes (PeLEDs), but their low photoluminescence quantum yield (PLQY), environmental instability, and poor device performance gravely inhibit their future development. Here, we employ a heteroatomic Cu²⁺ doping strategy combined with post-treatment Br^- anion exchange to prepare high-performance deep-blue perovskites CsPb(Br/Cl)₃. The Cu²⁺ doping strategy significantly decreases the intrinsic chlorine defects, ensuring that the inferior CsPbCl₃ quantum dots are transformed into two-dimensional nanosheets with enhanced violet photoluminescence and increased exciton binding energy. Further, with the post-treatment Br^- anion exchange, the as-prepared CsPb(Br/Cl)₃ nanosheets with more radiation recombination and less ion migration present an enhanced PLQY of 94% and better humidity stability of 30 days. Based on the optimized CsPb(Br/Cl)₃, we fabricated deep-blue PeLEDs with luminescence emission at 462 nm, a maximum luminance of 761 cd m^-2, and a current density of 205 mA cm^-2. This work puts forward a feasible synthesis strategy to prepare efficient and stable mixed-halide blue perovskite CsPb(Br/Cl)₃ and related blue PeLEDs, which may promote the further application of mixed-halide perovskites in the blue light range.

State of the Art and Prospects for Halide Perovskite Nanocrystals

Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research.

All-inorganic perovskite quantum dot light-emitting memories

Field-induced ionic motions in all-inorganic CsPbBr₃ perovskite quantum dots (QDs) strongly dictate not only their electro-optical characteristics but also the ultimate optoelectronic device performance. Here, we show that the functionality of a single Ag/CsPbBr₃/ITO device can be actively switched on a sub-millisecond scale from a resistive random-access memory (RRAM) to a light-emitting electrochemical cell (LEC), or vice versa, by simply modulating its bias polarity. We then realize for the first time a fast, all-perovskite light-emitting memory (LEM) operating at 5 kHz by pairing such two identical devices in series, in which one functions as an RRAM to electrically read the encoded data while the other simultaneously as an LEC for a parallel, non-contact optical reading. We further show that the digital status of the LEM can be perceived in real time from its emission color. Our work opens up a completely new horizon for more advanced all-inorganic perovskite optoelectronic technologies.

Electric field induced ion migration is a well-known phenomenon in perovskite, but the consequences are notorious, and thus needs to be prevented. Here, on the other hand, the authors cleverly manipulate this event for realising resistive random-access memory and light-emitting electrochemical cell in one device based on CsPbBr₃ quantum dots.

Thin Layer Buckling in Perovskite CsPbBr3 Nanobelts

Flexible semiconductor materials, where structural fluctuations and transformation are tolerable and have low impact on electronic properties, focus interest for future applications. Two-dimensional thin layer lead halide perovskites are hailed for their unconventional optoelectronic features. We report structural deformations via thin layer buckling in colloidal CsPbBr₃ nanobelts adsorbed on carbon substrates. The microstructure of buckled nanobelts is determined using transmission electron microscopy and atomic force microscopy. We measured significant decrease in emission from the buckled nanobelt using cathodoluminescence, marking the influence of such mechanical deformations on electronic properties. By employing plate buckling theory, we approximate adhesion forces between the buckled nanobelt and the substrate to be F_adhesion ∼ 0.12 μN, marking a limit to sustain such deformation. This work highlights detrimental effects of mechanical buckling on electronic properties in halide perovskite nanostructures and points toward the capillary action that should be minimized in fabrication of future devices and heterostructures based on nanoperovskites.

Recent Advances in Ligand Design and Engineering in Lead Halide Perovskite Nanocrystals

Lead halide perovskite (LHP) nanocrystals (NCs) have recently garnered enhanced development efforts from research disciplines owing to their superior optical and optoelectronic properties. These materials, however, are unlike conventional quantum dots, because they possess strong ionic character, labile ligand coverage, and overall stability issues. As a result, the system as a whole is highly dynamic and can be affected by slight changes of particle surface environment. Specifically, the surface ligand shell of LHP NCs has proven to play imperative roles throughout the lifetime of a LHP NC. Recent advances in engineering and understanding the roles of surface ligand shells from initial synthesis, through postsynthetic processing and device integration, finally to application performances of colloidal LHP NCs are covered here.

Layer-by-layer anionic diffusion in two-dimensional halide perovskite vertical heterostructures

Anionic diffusion in a soft crystal lattice of hybrid halide perovskites affects their stability, optoelectronic properties and the resulting device performance. The use of two-dimensional (2D) halide perovskites improves the chemical stability of perovskites and suppresses the intrinsic anionic diffusion in solid-state devices. Based on this strategy, devices with an enhanced stability and reduced hysteresis have been achieved. However, a fundamental understanding of the role of organic cations in inhibiting anionic diffusion across the perovskite-ligand interface is missing. Here we demonstrate the first quantitative investigation of the anionic interdiffusion across atomically flat 2D vertical heterojunctions. Interestingly, the halide diffusion does not follow the classical diffusion process. Instead, a 'quantized' layer-by-layer diffusion model is proposed to describe the behaviour of the anionic migration in 2D halide perovskites. Our results provide important insights into the mechanism of anionic diffusion in 2D perovskites and provide a new materials platform with an enhanced stability for heterostructure integration.

In Situ Vapor-Phase Halide Exchange of Patterned Perovskite Thin Films

Metal halide perovskites (MHPs) exhibit optoelectronic properties that are dependent on their ionic composition, and the feasible exploitation of these properties for device applications requires the ability to control the ionic composition integrated with the patterning process. Herein, the halide exchange process of MHP thin films directly combined with the patterning process via a vapor transport method is demonstrated. Specifically, the patterned arrays of CH₃ NH₃ PbBr₃ (MAPbBr₃ ) are obtained by stepwise conversion from polymer-templated PbI₂ thin films to CH₃ NH₃ PbI₃ (MAPbI₃ ), followed by halide exchange via precursor switching from CH₃ NH₃ I to CH₃ NH₃ Br. It is confirmed that the phase transformation from MAPbI₃ patterns to MAPbBr₃ shows time- and position-dependences on the substrate during halide exchange following the solid-solution model with Avrami kinetics. The photodetectors fabricated from the completely exchanged MAPbBr₃ patterns display exceptional air stability and reversible detectivity from "apparent death" upon removing the adsorbed impurities, thereby suggesting the superior structural stability of perovskite patterns prepared through vapor-phase halide exchange. The results demonstrate the potential of chemical vapor deposition patterning of MHP materials in multicomponent optoelectronic device systems.

Metamorphoses of Cesium Lead Halide Nanocrystals

Following the impressive development of bulk lead-based perovskite photovoltaics, the “perovskite fever” did not spare nanochemistry. In just a few years, colloidal cesium lead halide perovskite nanocrystals have conquered researchers worldwide with their easy synthesis and color-pure photoluminescence. These nanomaterials promise cheap solution-processed lasers, scintillators, and light-emitting diodes of record brightness and efficiency. However, that promise is threatened by poor stability and unwanted reactivity issues, throwing down the gauntlet to chemists.

More generally, Cs–Pb–X nanocrystals have opened an exciting chapter in the chemistry of colloidal nanocrystals, because their ionic nature and broad diversity have challenged many paradigms established by nanocrystals of long-studied metal chalcogenides, pnictides, and oxides. The chemistry of colloidal Cs–Pb–X nanocrystals is synonymous with change: these materials demonstrate an intricate pattern of shapes and compositions and readily transform under physical stimuli or the action of chemical agents. In this Account, we walk through four types of Cs–Pb–X nanocrystal metamorphoses: change of structure, color, shape, and surface. These transformations are often interconnected; for example, a change in shape may also entail a change of color.

The ionic bonding, high anion mobility due to vacancies, and preservation of cationic substructure in the Cs–Pb–X compounds enable fast anion exchange reactions, allowing the precise control of the halide composition of nanocrystals of perovskites and related compounds (e.g., CsPbCl₃ ⇄ CsPbBr₃ ⇄ CsPbI₃ and Cs₄PbCl₆ ⇄ Cs₄PbBr₆ ⇄ Cs₄PbI₆) and tuning of their absorption edge and bright photoluminescence across the visible spectrum. Ion exchanges, however, are just one aspect of a richer chemistry.

Cs–Pb–X nanocrystals are able to capture or release (in short, trade) ions or even neutral species from or to the surrounding environment, causing major changes to their structure and properties. The trade of neutral PbX₂ units allows Cs–Pb–X nanocrystals to cross the boundaries among four different types of compounds: 4CsX + PbX₂ ⇄ Cs₄PbBr₆ + 3PbX₂ ⇄ 4CsPbBr₃ + PbX₂ ⇄ 4CsPb₂X₅. These reactions do not occur at random, because the reactant and product nanocrystals are connected by the Cs⁺ cation substructure preservation principle, stating that ion trade reactions can transform one compound into another by means of distorting, expanding, or contracting their shared Cs⁺ cation substructure.

The nanocrystal surface is a boundary between the core and the surrounding environment of Cs–Pb–X nanocrystals. The surface influences nanocrystal stability, optical properties, and shape. For these reasons, the dynamic surface of Cs–Pb–X nanocrystals has been studied in detail, especially in CsPbX₃ perovskites. Two takeaways have emerged from these studies. First, the competition between primary alkylammonium and cesium cations for the surface sites during the CsPbX₃ nanocrystal nucleation and growth governs the cube/plate shape equilibrium. Short-chain acids and branched amines influence that equilibrium and enable shape-shifting synthesis of pure CsPbX₃ cubes, nanoplatelets, nanosheets, or nanowires. Second, quaternary ammonium halides are emerging as superior ligands that extend the shelf life of Cs–Pb–X colloidal nanomaterials, boost their photoluminescence quantum yield, and prevent foreign ions from escaping the nanocrystals. That is accomplished by combining reduced ligand solubility, due to the branched organic ammonium cation, with the surface-healing capabilities of the halide counterions, which are small Lewis bases.