The core of the tetrameric mycobacterial porin MspA is an extremely stable beta-sheet domain

Nanopores map the acid-base properties of a single site in a single DNA molecule

Nanopores are increasingly powerful tools for single molecule sensing, in particular, for sequencing DNA, RNA and peptides. This success has spurred efforts to sequence non-canonical nucleic acid bases and amino acids. While canonical DNA and RNA bases have pKas far from neutral, certain non-canonical bases, natural RNA modifications, and amino acids are known to have pKas near neutral pHs at which nanopore sequencing is typically performed. Previous reports have suggested that the nanopore signal may be sensitive to the protonation state of an individual moiety. We sequenced ion currents with the MspA nanopore using a single stranded DNA containing a single non-canonical DNA base (Z) at various pH conditions. The Z-base has a near-neutral pKa ∼ 7.8. We find that the measured ion current is remarkably sensitive to the protonation state of the Z-base. We demonstrate how nanopores can be used to localize and determine the pKa of individual moieties along a polymer. More broadly, these experiments provide a path to mapping different protonation sites along polymers and give insight in how to optimize sequencing of polymers that contain moieties with near-neutral pKas.

Functionally Active Synthetic α-Helical Pores

ConspectusTransmembrane pores are currently at the forefront of nanobiotechnology, nanopore chemistry, and synthetic chemical biology research. Over the past few decades, significant studies in protein engineering have paved the way for redesigning membrane protein pores tailored for specific applications in nanobiotechnology. Most previous efforts predominantly centered on natural β-barrel pores designed with atomic precision for nucleic acid sequencing and sensing of biomacromolecules, including protein fragments. The requirement for a more efficient single-molecule detection system has driven the development of synthetic nanopores. For example, engineering channels to conduct ions and biomolecules selectively could lead to sophisticated nanopore sensors. Also, there has been an increased interest in synthetic pores, which can be fabricated to provide more control in designing architecture and diameter for single-molecule sensing of complex biomacromolecules. There have been impressive advancements in developing synthetic DNA-based pores, although their application in nanopore technology is limited. This has prompted a significant shift toward building synthetic transmembrane α-helical pores, a relatively underexplored field offering novel opportunities. Recently, computational tools have been employed to design and construct α-helical barrels of defined structure and functionality.We focus on building synthetic α-helical pores using naturally occurring transmembrane motifs of membrane protein pores. Our laboratory has developed synthetic α-helical transmembrane pores based on the natural porin PorACj (Porin A derived from Corynebacterium jeikeium) that function as nanopore sensors for single-molecule sensing of cationic cyclodextrins and polypeptides. Our breakthrough lies in being the first to create a functional and large stable synthetic transmembrane pore composed of short synthetic α-helical peptides. The key highlight of our work is that these pores can be synthesized using easy chemical synthesis, which permits its easy modification to include a variety of functional groups to build charge-selective sophisticated pores. Additionally, we have demonstrated that stable functional pores can be constructed from D-amino acid peptides. The analysis of pores composed of D- and L-amino acids in the presence of protease showed that only the D pores are highly functional and stable. The structural models of these pores revealed distinct surface charge conformation and geometry. These new classes of synthetic α-helical pores are highly original systems of general interest due to their unique architecture, functionality, and potential applications in nanopore technology and chemical biology. We emphasize that these simplified transmembrane pores have the potential to be components of functional nanodevices and therapeutic tools. We also suggest that such designed peptides might be valuable as antimicrobial agents and can be targeted to cancer cells. This article will focus on the evolutions in assembling α-helical transmembrane pores and highlight their advantages, including structural and functional versatility.

Nanopore analysis of cis-diols in fruits

Natural fruits contain a large variety of cis-diols. However, due to the lack of a high-resolution sensor that can simultaneously identify all cis-diols without a need of complex sample pretreatment, direct and rapid analysis of fruits in a hand-held device has never been previously reported. Nanopore, a versatile single molecule sensor, can be specially engineered to perform this task. A hetero-octameric Mycobacterium smegmatis porin A (MspA) nanopore modified with a sole phenylboronic acid (PBA) adapter is prepared. This engineered MspA accurately recognizes 1,2-diphenols, alditols, α-hydroxy acids and saccharides in prune, grape, lemon, different varieties of kiwifruits and commercial juice products. Assisted with a custom machine learning program, an accuracy of 99.3% is reported and the sample pretreatment is significantly simplified. Enantiomers such as DL-malic acids can also be directly identified, enabling sensing of synthetic food additives. Though demonstrated with fruits, these results suggest wide applications of nanopore in food and drug administration uses.

The C-terminus is essential for the stability of the mycobacterial channel protein MspA

Outer membrane proteins perform essential functions in uptake and secretion processes in bacteria. MspA is an octameric channel protein in the outer membrane of Mycobacterium smegmatis and is structurally distinct from any other known outer membrane protein. MspA is the founding member of a family with more than 3000 homologs and is one of the most widely used proteins in nanotechnological applications due to its advantageous pore structure and extraordinary stability. While a conserved C-terminal signal sequence is essential for folding and protein assembly in the outer membrane of Gram-negative bacteria, the molecular determinants of these processes are unknown for MspA. In this study, we show that mutation and deletion of methionine 183 in the highly conserved C-terminus of MspA and mutation of the conserved tryptophan 40 lead to a complete loss of protein in heat extracts of M. smegmatis. Swapping these residues partially restores the heat stability of MspA indicating that methionine 183 and tryptophan 40 form a conserved sulfur-π electron interaction, which stabilizes the MspA monomer. Flow cytometry showed that all MspA mutants are surface-accessible demonstrating that oligomerization and membrane integration in M. smegmatis are not affected. Thus, the conserved C-terminus of MspA is essential for its thermal stability, but it is not required for protein assembly in its native membrane, indicating that this process is mediated by a mechanism distinct from that in Gram-negative bacteria. These findings will benefit the rational design of MspA-like pores to tailor their properties in current and future applications.

Antimicrobial peptides grafted onto the surface of N-acetylcysteine-chitosan nanoparticles can revitalize drugs against clinical isolates of Mycobacterium tuberculosis

Tuberculosis is caused by Mycobacterium tuberculosis (MTB) and is the leading cause of death from infectious diseases in the World. The search for new antituberculosis drugs is a high priority, since several drug-resistant TB-strains have emerged. Many nanotechnology strategies are being explored to repurpose or revive drugs. An interesting approach is to graft antimicrobial peptides (AMPs) to antibiotic-loaded nanoparticles. The objective of the present work was to determine the anti-MTB activity of rifampicin-loaded N-acetylcysteine-chitosan-based nanoparticles (NPs), conjugated with the AMP Ctx(Ile21)-Ha; against clinical isolates (multi- and extensively-drug resistant) and the H37Rv strain. The modified chitosan and drug-loaded NPs were characterized with respect to their physicochemical stability and their antimycobacterial profile, which showed potent inhibition (MIC values <0.977 μg/mL) by the latter. Furthermore, their accumulation within macrophages and cytotoxicity were determined. To understand the possible mechanisms of action, an in silico study of the peptide against MTB membrane receptors was performed. The results presented herein demonstrate that antibiotic-loaded NPs grafted with an AMP can be a powerful tool for revitalizing drugs against multidrug-resistant M. tuberculosis strains, by launching multiple attacks against MTB. This approach could potentially serve as a novel treatment strategy for various long-term diseases requiring extended treatment periods.

Direct Determination of the Structure of Single Biopolymer Molecules Using Nanopore Sequencing

This review highlights operational principles, features, and modern aspects of the development of third-generation sequencing technology of biopolymers focusing on the nucleic acids analysis, namely the nanopore sequencing system. Basics of the method and technical solutions used for its realization are considered, from the first works showing the possibility of creation of these systems to the easy-to-handle procedure developed by Oxford Nanopore Technologies company. Moreover, this review focuses on applications, which were developed and realized using equipment developed by the Oxford Nanopore Technologies, including assembly of whole genomes, methagenomics, direct analysis of the presence of modified bases.

Advances of nanopore-based sensing techniques for contaminants evaluation of food and agricultural products

Food safety assurance systems are becoming more stringent in response to the growing food safety problems. Rapid, sensitive, and reliable detection technology is a prerequisite for the establishment of food safety assurance systems. Nanopore technology has been taken as one of the emerging technology capable of dealing with the detection of harmful contaminants as efficiently as possible due to the advantage of label-free, high-throughput, amplification-free, and rapid detection features. Start with the history of nanopore techniques, this review introduced the underlying knowledge of detection mechanism of nanopore-based sensing techniques. Meanwhile, sensing interfaces for the construction of nanopore sensors are comprehensively summarized. Moreover, this review covers the current advances of nanopore techniques in the application of food safety screening. Currently, the establishment of nanopore sensing devices is mainly based on the blocking current phenomenon. Sensing interfaces including biological nanopores, solid-state nanopores, DNA origami, and de novo designed nanopores can be used in the manufacture of sensing devices. Food harmful substances, including heavy metals, veterinary drugs, pesticide residues, food toxins, and other harmful substances can be quickly determined by nanopore-based sensors. Moreover, the combination of nanopore techniques with advanced materials has become one of the most effective methods to improve sensing properties.

Control of subunit stoichiometry in single-chain MspA nanopores

Transmembrane protein channels enable fast and highly sensitive detection of single molecules. Nanopore sequencing of DNA was achieved using an engineered Mycobacterium smegmatis porin A (MspA) in combination with a motor enzyme. Due to its favorable channel geometry, the octameric MspA pore exhibits the highest current level compared with other pore proteins. To date, MspA is the only protein nanopore with a published record of DNA sequencing. While widely used in commercial devices, nanopore sequencing of DNA suffers from significant base-calling errors due to stochastic events of the complex DNA-motor-pore combination and the contribution of up to five nucleotides to the signal at each position. Different mutations in specific subunits of a pore protein offer an enormous potential to improve nucleotide resolution and sequencing accuracy. However, individual subunits of MspA and other oligomeric protein pores are randomly assembled in vivo and in vitro, preventing the efficient production of designed pores with different subunit mutations. In this study, we converted octameric MspA into a single-chain pore by connecting eight subunits using peptide linkers. Lipid bilayer experiments demonstrated that single-chain MspA formed membrane-spanning channels and discriminated all four nucleotides identical to MspA produced from monomers in DNA hairpin experiments. Single-chain constructs comprising three, five, six, and seven connected subunits assembled to functional channels, demonstrating a remarkable plasticity of MspA to different subunit stoichiometries. Thus, single-chain MspA constitutes a new milestone in the optimization of MspA as a biosensor for DNA sequencing and many other applications by enabling the production of pores with distinct subunit mutations and pore diameters.

Biological nanopores for sensing applications

Biological nanopores are proteins with transmembrane pore that can be embedded in lipid bilayer. With the development of single-channel current measurement technologies, biological nanopores have been reconstituted into planar lipid bilayer and used for single-molecule sensing of various analytes and events such as single-molecule DNA sensing and sequencing. To improve the sensitivity for specific analytes, various engineered nanopore proteins and strategies are deployed. Here, we introduce the origin and principle of nanopore sensing technology as well as the structure and associated properties of frequently used protein nanopores. Furthermore, sensing strategies for different applications are reviewed, with focus on the alteration of buffer condition, protein engineering, and deployment of accessory proteins and adapter-assisted sensing. Finally, outlooks for de novo design of nanopore and nanopore beyond sensing are discussed.

Allosteric Switching of Calmodulin in a Mycobacterium smegmatis porin A (MspA) Nanopore-Trap

Recent developments concerning large protein nanopores suggest a new approach to structure profiling of native folded proteins. In this work, the large vestibule of Mycobacterium smegmatis porin A (MspA) and calmodulin (CaM), a Ca²⁺ -binding protein, were used in the direct observation of the protein structure. Three conformers, including the Ca²⁺ -free, Ca²⁺ -bound, and target peptide-bound states of CaM, were unambiguously distinguished. A disease related mutant, CaM D129G was also discriminated by MspA, revealing how a single amino acid replacement can interfere with the Ca²⁺ -binding capacity of the whole protein. The binding capacity and aggregation effect of CaM induced by different ions (Mg²⁺ /Sr²⁺ /Ba²⁺ /Ca²⁺ /Pb²⁺ /Tb³⁺ ) were also investigated and the stability of MspA in extreme conditions was evaluated. This work demonstrates the most systematic single-molecule investigation of different allosteric conformers of CaM, acknowledging the high sensing resolution offered by the MspA nanopore trap.

Recent advances in biological nanopores for nanopore sequencing, sensing and comparison of functional variations in MspA mutants

Biological nanopores are revolutionizing human health by the great myriad of detection and diagnostic skills. Their nano-confined area and ingenious shape are suitable to investigate a diverse range of molecules that were difficult to identify with the previous techniques. Additionally, high throughput and label-free detection of target analytes instigated the exploration of new bacterial channel proteins such as Fragaceatoxin C (FraC), Cytolysin A (ClyA), Ferric hydroxamate uptake component A (FhuA) and Curli specific gene G (CsgG) along with the former ones, like α-hemolysin (αHL), Mycobacterium smegmatis porin A (MspA), aerolysin, bacteriophage phi 29 and Outer membrane porin G (OmpG). Herein, we discuss some well-known biological nanopores but emphasize on MspA and compare the effects of site-directed mutagenesis on the detection ability of its mutants in view of the surface charge distribution, voltage threshold and pore-analyte interaction. We also discuss illustrious and latest advances in biological nanopores for past 2-3 years due to limited space. Last but not the least, we elucidate our perspective for selecting a biological nanopore and propose some future directions to design a customized nanopore that would be suitable for DNA sequencing and sensing of other nontrivial molecules in question.

Rapid and multiplex preparation of engineered Mycobacterium smegmatis porin A (MspA) nanopores for single molecule sensing and sequencing

Acknowledging its unique conical lumen structure, Mycobacterium smegmatis porin A (MspA) was the first type of nanopore that has successfully sequenced DNA. Recent developments of nanopore single molecule chemistry have also suggested MspA to be an optimum single molecule reactor. However, further investigations with this approach require heavy mutagenesis which is labor intensive and requires high end instruments for purifications. We here demonstrate an efficient and economic protocol which performs rapid and multiplex preparation of a variety of MspA mutants. The prepared MspA mutants were demonstrated in operations such as nanopore insertion, sequencing, optical single channel recording (oSCR), nanopore single molecule chemistry and nanopore rectification. The performance is no different from that of pores however prepared by other means. The time of all human operations and the cost for a single batch of preparation have been minimized to 40 min and 0.4$, respectively. This method is extremely useful in the screening of new MspA mutants, which has an urgent requirement in further investigations of new MspA nanoreactors. Its low cost and simplicity also enable efficient preparations of MspA nanopores for both industrial manufacturing and academic research.

Mapping Potential Engineering Sites of Mycobacterium smegmatis porin A (MspA) to Form a Nanoreactor

Protein nanopores can be engineered as nanoreactors to investigate single-molecule chemical reactions. Recent studies have demonstrated that Mycobacterium smegmatis porin A (MspA) nanopore is a superior engineering template acknowledging its geometrical advantages. However, reported engineering of MspA to form a nanoreactor has focused only on site 91 and mapping of other engineering sites have never been performed before. By taking tetrachloraurate(III) ([AuCl₄]^-) as a model reactant, potential engineering sites within the pore constriction of MspA have been thoroughly investigated. It is discovered that the produced event amplitude is inversely correlated to the cross-sectional diameter of the pore constriction size at the engineering site, providing evidence that site 91 is actually already the optimum place to introduce the chemical reactivity. Other unavailable engineering sites, which either significantly interfere with the pore assembly or produce reactive sites facing to the pore's exterior instead of to the pore lumen, were also spotted and discussed. All results demonstrated above have provided a complete map of engineering sites within the constriction area of MspA and may be beneficial as a reference in future engineering of corresponding nanoreactors.

Structural-profiling of low molecular weight RNAs by nanopore trapping/translocation using Mycobacterium smegmatis porin A

Folding of RNA can produce elaborate tertiary structures, corresponding to their diverse roles in the regulation of biological activities. Direct observation of RNA structures at high resolution in their native form however remains a challenge. The large vestibule and the narrow constriction of a Mycobacterium smegmatis porin A (MspA) suggests a sensing mode called nanopore trapping/translocation, which clearly distinguishes between microRNA, small interfering RNA (siRNA), transfer RNA (tRNA) and 5 S ribosomal RNA (rRNA). To further profit from the acquired event characteristics, a custom machine learning algorithm is developed. Events from measurements with a mixture of RNA analytes can be automatically classified, reporting a general accuracy of ~93.4%. tRNAs, which possess a unique tertiary structure, report a highly distinguishable sensing feature, different from all other RNA types tested in this study. With this strategy, tRNAs from different sources are measured and a high structural conservation across different species is observed in single molecule.

Biological Nanopores: Engineering on Demand

Nanopore-based sensing is a powerful technique for the detection of diverse organic and inorganic molecules, long-read sequencing of nucleic acids, and single-molecule analyses of enzymatic reactions. Selected from natural sources, protein-based nanopores enable rapid, label-free detection of analytes. Furthermore, these proteins are easy to produce, form pores with defined sizes, and can be easily manipulated with standard molecular biology techniques. The range of possible analytes can be extended by using externally added adapter molecules. Here, we provide an overview of current nanopore applications with a focus on engineering strategies and solutions.

Recovery of Non-tuberculous Mycobacteria from Water is Influenced by Phenotypic Characteristics and Decontamination Methods

Infections related to non-tuberculous mycobacteria (NTM) have recently increased worldwide. The transmission of these microorganisms from the environment has been suggested as the main source for human infections. To elucidate the epidemiological aspects and distribution of these pathogens, many studies have evaluated several decontamination methods and protocols to properly isolate NTM from environmental samples, mainly from water. However, no satisfactory strategy has been found for isolation of most of the NTM species harboring different phenotypic characteristics. Here, we evaluated the susceptibility of 23 NTM strains presenting variable growth rate and pigmentation patterns to eight different methods: oxalic acid (2.5% and 5%), cetylpyridinium chloride (CPC) (0.0025% and 0.005%), sodium hydroxide (NaOH) (2% and 4%), and sodium dodecyl sulfate (SDS) plus NaOH (SDS 1.5%-NaOH 0.5% and SDS 3%-NaOH 1%). It was found that the viability of NTM exposed to different decontamination methods varies according to their phenotypic characteristics and two methods (SDS 1.5% plus NaOH 0.5% and CPC 0.0025%) were necessary for effective isolation of all of the species tested. These findings supply important insights for future studies on the environmental occurrence of mycobacteria and improving the sensibility of traditional strategies.

Redox regulation of type-I inositol trisphosphate receptors in intact mammalian cells

A sensitization of inositol 1,4,5-trisphosphate receptor (IP₃R)-mediated Ca²⁺ release is associated with oxidative stress in multiple cell types. These effects are thought to be mediated by alterations in the redox state of critical thiols in the IP₃R, but this has not been directly demonstrated in intact cells. Here, we utilized a combination of gel-shift assays with MPEG-maleimides and LC-MS/MS to monitor the redox state of recombinant IP₃R1 expressed in HEK293 cells. We found that under basal conditions, ∼5 of the 60 cysteines are oxidized in IP₃R1. Cell treatment with 50 μm thimerosal altered gel shifts, indicating oxidation of ∼20 cysteines. By contrast, the shifts induced by 0.5 mm H₂O₂ or other oxidants were much smaller. Monitoring of biotin-maleimide attachment to IP₃R1 by LC-MS/MS with 71% coverage of the receptor sequence revealed modification of two cytosolic (Cys-292 and Cys-1415) and two intraluminal cysteines (Cys-2496 and Cys-2533) under basal conditions. The thimerosal treatment modified an additional eleven cysteines, but only three (Cys-206, Cys-767, and Cys-1459) were consistently oxidized in multiple experiments. H₂O₂ also oxidized Cys-206 and additionally oxidized two residues not modified by thimerosal (Cys-214 and Cys-1397). Potentiation of IP₃R channel function by oxidants was measured with cysteine variants transfected into a HEK293 IP₃R triple-knockout cell line, indicating that the functionally relevant redox-sensitive cysteines are predominantly clustered within the N-terminal suppressor domain of IP₃R. To our knowledge, this study is the first that has used proteomic methods to assess the redox state of individual thiols in IP₃R in intact cells.

Identification and characterization of a cell wall porin from Gordonia jacobaea

Gordonia jacobaea is a bacterium belonging to the mycolata group characterized by its ability to produce carotenoids. Mycolic acids in the cell wall contribute to reducing the permeability of their envelopes requiring the presence of channel-forming proteins to allow the exchange of hydrophilic molecules with the surrounding medium. Identification and purification of the channel-forming proteins was accomplished by SDS-PAGE, Mass spectrometry and Mass peptide fingerprinting and the channel-forming activity was studied by reconstitution in lipid bilayers. Here, we describe for the first time the presence of a cell-wall protein from G. jacobaea with channel-forming activity. Our results suggest that this protein bears a low similarity to other hypothetical proteins from the genus Gordonia of uncharacterized functions. The channel has an average single-channel conductance of 800 pS in 1 M KCl, is moderately anion-selective, and does not show any voltage dependence for voltages between +100 and -100 mV. The channel characteristics suggest that this protein could be of relevance in the import and export of negatively charged molecules across the cell wall. This could contribute to design treatments for mycobacterial infections, as well as being of interest in biotechnology applications.

Malaria Parasite CLAG3, a Protein Linked to Nutrient Channels, Participates in High Molecular Weight Membrane-Associated Complexes in the Infected Erythrocyte

Malaria infected erythrocytes show increased permeability to a number of solutes important for parasite growth as mediated by the Plasmodial Surface Anion Channel (PSAC). The P. falciparum clag3 genes have recently been identified as key determinants of PSAC, though exactly how they contribute to channel function and whether additional host/parasite proteins are required remain unknown. To begin to answer these questions, I have taken a biochemical approach. Here I have used an epitope-tagged CLAG3 parasite to perform co-immunoprecipitation experiments using membrane fractions of infected erythrocytes. Native PAGE and mass spectrometry studies reveal that CLAG3 participate in at least three different high molecular weight complexes: a ~720kDa complex consisting of CLAG3, RHOPH2 and RHOPH3; a ~620kDa complex consisting of CLAG3 and RHOPH2; and a ~480kDa complex composed solely of CLAG3. Importantly, these complexes can be found throughout the parasite lifecycle but are absent in untransfected controls. Extracellular biotin labeling and protease susceptibility studies localize the 480kDa complex to the erythrocyte membrane. This complex, likely composed of a homo-oligomer of 160kDa CLAG3, may represent a functional subunit, possibly the pore, of PSAC.

MspA nanopore as a single-molecule tool: From sequencing to SPRNT

Single-molecule picometer resolution nanopore tweezers (SPRNT) is a new tool for analyzing the motion of nucleic acids through molecular motors. With SPRNT, individual enzymatic motions along DNA as small as 40 pm can be resolved on sub-millisecond time scales. Additionally, SPRNT reveals an enzyme’s exact location with respect to a DNA strand’s nucleotide sequence, enabling identification of sequence-specific behaviors. SPRNT is enabled by a mutant version of the biological nanopore formed by Mycobacterium smegmatis porin A (MspA). SPRNT is strongly rooted in nanopore sequencing and therefore requires a solid understanding of basic principles of nanopore sequencing. Furthermore, SPRNT shares tools developed for nanopore sequencing and extends them to analysis of single-molecule kinetics. As such, this review begins with a brief history of our work developing the nanopore MspA for nanopore sequencing. We then describe the underlying principles of SPRNT, how it works in detail, and propose some potential future uses. We close with a comparison of SPRNT to other techniques and we present the methods that will enable others to use SPRNT.

Hetero-oligomeric MspA pores in Mycobacterium smegmatis

The porin MspA of Mycobacterium smegmatis is a biological nanopore used for DNA sequencing. The octameric MspA pore can be isolated from M. smegmatis in milligram quantities, is extremely stable against denaturation and rapidly inserts into lipid membranes. Here, we show that MspA pores composed of different Msp subunits are formed in M. smegmatis and that hetero-oligomers of different Msp monomers increase the heterogeneity of MspA pores designed for DNA sequencing. To improve the quality of preparations of mutant MspA proteins, all four msp genes were deleted from the M. smegmatis genome after insertion of an inducible porin gene from M. tuberculosis. In the msp quadruple mutant M. smegmatis ML712 no Msp porins were detected and mutant MspA proteins were produced at wild-type levels. Lipid bilayer experiments demonstrated that MspA pores isolated from ML712 formed functional channels and had a narrower conductance distribution than pores purified from M. smegmatis with background msp expression. Thus, the M. smegmatis msp quadruple mutant improves the homogeneity of MspA pores designed for DNA sequencing and might also facilitate the identification and functional characterization of other mycobacterial pore proteins.

Tuning the size and properties of ClyA nanopores assisted by directed evolution

Nanopores have recently emerged as powerful tools in single-molecule investigations. Biological nanopores, however, have drawbacks, including a fixed size and limited stability in lipid bilayers. Inspired by the great success of directed evolution approaches in tailoring enzyme properties, in this work we evolved Cytolysin A from Salmonella typhi (ClyA) to a high level of soluble expression and desired electrical properties in lipid bilayers. Evolved ClyA nanopores remained open up to -150 mV applied potential, which allowed the detailed characterization of folded proteins by ionic current recordings. Remarkably, we also found that ClyA forms several nanopore species; among which we could isolate and characterize three nanopore types most likely corresponding to the 12mer, 13mer, and 14mer oligomeric forms of ClyA. Protein current blockades to the three ClyA nanopores showed that subnanometer variations in the diameter of nanopores greatly affect the recognition of analyte proteins.

Adaptation of Mycobacterium smegmatis to an Industrial Scale Medium and Isolation of the Mycobacterial PorinMspA

The adaptation of the organism to a simple and cost-effective growth medium is mandatory in developing a process for large scale production of the octamericporinMspA, which is isolated from Mycobacterium smegmatis. A fermentation optimization with the minimal nutrients required for growth has been performed. During the fermentation, the iron- and ammonium chloride concentrations in the medium were varied to determine their impact on the observed growth rates and cell mass yields. Common antibiotics to control contamination were eliminated in favor of copper sulfate to reduce costs. MspA has been successfully isolated from the harvested M. smegmatisusing aqueous nOPOE (n-octyloligooxyethylene) at 65°C. Because of the extraordinary stability of MspA, it is possible to denature and precipitate virtually all other proteins and contaminants by following this approach. To further purify the product, acetone is used for precipitation. Gel electrophoresis confirmed the presence and purity of MspA. A maximum of 840µg (via Bradford assay) of pure MspA per liter of the optimized simple growth medium has been obtained. This is a 40% increase with respect to the previously reported culture medium for MspA.

Nanoscopic surfactant behavior of the porin MspA in aqueous media

The mycobacterial porin MspA is one of the most stable channel proteins known to date. MspA forms vesicles at low concentrations in aqueous buffers. Evidence from dynamic light scattering, transmission electron microscopy and zeta-potential measurements by electrophoretic light scattering indicate that MspA behaves like a nanoscale surfactant. The extreme thermostability of MspA allows these investigations to be carried out at temperatures as high as 343 K, at which most other proteins would quickly denature. The principles of vesicle formation of MspA as a function of temperature and the underlying thermodynamic factors are discussed here. The results obtained provide crucial evidence in support of the hypothesis that, during vesicle formation, nanoscopic surfactant molecules, such as MspA, deviate from the principles underlined in classical surface chemistry.

Solid-State and Biological Nanopore for Real-Time Sensing of Single Chemical and Sequencing of DNA

Sensitivity and specificity are two most important factors to take into account for molecule sensing, chemical detection and disease diagnosis. A perfect sensitivity is to reach the level where a single molecule can be detected. An ideal specificity is to reach the level where the substance can be detected in the presence of many contaminants. The rapidly progressing nanopore technology is approaching this threshold. A wide assortment of biomotors and cellular pores in living organisms perform diverse biological functions. The elegant design of these transportation machineries has inspired the development of single molecule detection based on modulations of the individual current blockage events. The dynamic growth of nanotechnology and nanobiotechnology has stimulated rapid advances in the study of nanopore based instrumentation over the last decade, and inspired great interest in sensing of single molecules including ions, nucleotides, enantiomers, drugs, and polymers such as PEG, RNA, DNA, and polypeptides. This sensing technology has been extended to medical diagnostics and third generation high throughput DNA sequencing. This review covers current nanopore detection platforms including both biological pores and solid state counterparts. Several biological nanopores have been studied over the years, but this review will focus on the three best characterized systems including α-hemolysin and MspA, both containing a smaller channel for the detection of single-strand DNA, as well as bacteriophage phi29 DNA packaging motor connector that contains a larger channel for the passing of double stranded DNA. The advantage and disadvantage of each system are compared; their current and potential applications in nanomedicine, biotechnology, and nanotechnology are discussed.

Interaction of bacteriophage l with its E. coli receptor, LamB

The initial step of viral infection is the binding of a virus onto the host cell surface. This first viral-host interaction would determine subsequent infection steps and the fate of the entire infection process. A basic understating of the underlining mechanism of initial virus-host binding is a prerequisite for establishing the nature of viral infection. Bacteriophage λ and its host Escherichia coli serve as an excellent paradigm for this purpose. λ phages bind to specific receptors, LamB, on the host cell surface during the infection process. The interaction of bacteriophage λ with the LamB receptor has been the topic of many studies, resulting in wealth of information on the structure, biochemical properties and molecular biology of this system. Recently, imaging studies using fluorescently labeled phages and its receptor unveil the role of spatiotemporal dynamics and divulge the importance of stochasticity from hidden variables in the infection outcomes. The scope of this article is to review the present state of research on the interaction of bacteriophage λ and its E. coli receptor, LamB.

Amyloid-like aggregates sequester numerous metastable proteins with essential cellular functions

Protein aggregation is linked with neurodegeneration and numerous other diseases by mechanisms that are not well understood. Here, we have analyzed the gain-of-function toxicity of artificial β sheet proteins that were designed to form amyloid-like fibrils. Using quantitative proteomics, we found that the toxicity of these proteins in human cells correlates with the capacity of their aggregates to promote aberrant protein interactions and to deregulate the cytosolic stress response. The endogenous proteins that are sequestered by the aggregates share distinct physicochemical properties: They are relatively large in size and significantly enriched in predicted unstructured regions, features that are strongly linked with multifunctionality. Many of the interacting proteins occupy essential hub positions in cellular protein networks, with key roles in chromatin organization, transcription, translation, maintenance of cell architecture and protein quality control. We suggest that amyloidogenic aggregation targets a metastable subproteome, thereby causing multifactorial toxicity and, eventually, the collapse of essential cellular functions.

Correlation between the OmpG secondary structure and its pH-dependent alterations monitored by FTIR

The channel activity of the outer-membrane protein G (OmpG) from Escherichia coli is pH-dependent. To investigate the role of the histidine pair His231/His261 in triggering channel opening and closing, we mutated both histidines to alanines and cysteines. Fourier transform infrared spectra revealed that the OmpG mutants stay-independent of pH-in an open conformation. Temperature ramp experiments indicate that the mutants are as stable as the open state of wild-type OmpG. The X-ray structure of the alanine-substituted OmpG mutant obtained at pH 6.5 confirms the constitutively open conformation. Compared to previous structures of the wild-type protein in the open and closed conformation, the mutant structure shows a difference in the extracellular loop L6 connecting beta-strands S12 and S13. A deletion of amino acids 220-228, which are thought to block the channel at low pH in wild-type OmpG, indicates conformational changes, which might be triggered by His231/His261.

Utilization of Arg-elution method for FLAG-tag based chromatography

FLAG-tag is one of the commonly used purification technologies for recombinant proteins. An antibody, M2, specifically binds to the FLAG-tag whether it is attached to N- or C-terminus of proteins to be purified. The bound proteins are generally eluted by competition with a large excess of free FLAG peptide. This requires synthetic FLAG peptide and also removal of bound FLAG peptide for M2 column regeneration. We have shown before that arginine at mild pH can effectively dissociate protein-protein or protein-ligand interactions, e.g. in Protein-A, antigen and dye-affinity chromatography. We have tested here elution of FLAG-fused proteins by arginine for columns of M2-immobilized resin using several proteins in comparison with competitive elution by FLAG peptide or low pH glycine buffer. Active and folded proteins were successfully and effectively eluted using 0.5-1M arginine at pH 3.5-4.4, as reported in this paper.

Functions of the periplasmic loop of the porin MspA from Mycobacterium smegmatis

MspA is the major porin of Mycobacterium smegmatis and mediates diffusion of small and hydrophilic solutes across the outer membrane. The octameric structure of MspA, its sharply defined constriction zone, and a large periplasmic loop L6 represent novel structural features. L6 consists of 13 amino acids and is directly adjacent to the constriction zone. Deletion of 3, 5, 7, 9, and 11 amino acids of the L6 loop resulted in functional pores that restored glucose uptake and growth of a porin mutant of M. smegmatis. Lipid bilayer experiments revealed that all mutant channels were noisier than wild type (wt) MspA, indicating that L6 is required for pore stability in vitro. Voltage gating of the Escherichia coli porin OmpF was attributed to loops that collapse into the channel in response to a strong electrical field. Here, we show that deletion mutants Delta7, Delta9, and Delta11 had critical voltages similar to wt MspA. This demonstrated that the L6 loop is not the primary voltage-dependent gating mechanism of MspA. Surprisingly, large deletions in L6 resulted in 3-6-fold less extractable pores, whereas small deletions did not alter expression levels of MspA. Pores with large deletions in L6 were more permissive for glucose than smaller deletion mutants, whereas their single channel conductance was similar to that of wt MspA. These results indicate that translocation of ions through the MspA pore is governed by different mechanisms than that of neutral solutes. This is the first study identifying a molecular determinant of solute translocation in a mycobacterial porin.

Single-molecule DNA detection with an engineered MspA protein nanopore

Nanopores hold great promise as single-molecule analytical devices and biophysical model systems because the ionic current blockades they produce contain information about the identity, concentration, structure, and dynamics of target molecules. The porin MspA of Mycobacterium smegmatis has remarkable stability against environmental stresses and can be rationally modified based on its crystal structure. Further, MspA has a short and narrow channel constriction that is promising for DNA sequencing because it may enable improved characterization of short segments of a ssDNA molecule that is threaded through the pore. By eliminating the negative charge in the channel constriction, we designed and constructed an MspA mutant capable of electronically detecting and characterizing single molecules of ssDNA as they are electrophoretically driven through the pore. A second mutant with additional exchanges of negatively-charged residues for positively-charged residues in the vestibule region exhibited a factor of approximately 20 higher interaction rates, required only half as much voltage to observe interaction, and allowed ssDNA to reside in the vestibule approximately 100 times longer than the first mutant. Our results introduce MspA as a nanopore for nucleic acid analysis and highlight its potential as an engineerable platform for single-molecule detection and characterization applications.

Rv1698 of Mycobacterium tuberculosis represents a new class of channel-forming outer membrane proteins

Mycobacteria contain an outer membrane composed of mycolic acids and a large variety of other lipids. Its protective function is an essential virulence factor of Mycobacterium tuberculosis. Only OmpA, which has numerous homologs in Gram-negative bacteria, is known to form channels in the outer membrane of M. tuberculosis so far. Rv1698 was predicted to be an outer membrane protein of unknown function. Expression of rv1698 restored the sensitivity to ampicillin and chloramphenicol of a Mycobacterium smegmatis mutant lacking the main porin MspA. Uptake experiments showed that Rv1698 partially complemented the permeability defect of the M. smegmatis porin mutant for glucose. These results indicated that Rv1698 provides an unspecific pore that can partially substitute for MspA. Lipid bilayer experiments demonstrated that purified Rv1698 is an integral membrane protein that indeed produces channels. The main single channel conductance is 4.5 +/- 0.3 nanosiemens in 1 M KCl. Zero current potential measurements revealed a weak preference for cations. Whole cell digestion of recombinant M. smegmatis with proteinase K showed that Rv1698 is surface-accessible. Taken together, these experiments demonstrated that Rv1698 is a channel protein that is likely involved in transport processes across the outer membrane of M. tuberculosis. Rv1698 has single homologs of unknown functions in Corynebacterineae and thus represents the first member of a new class of channel proteins specific for mycolic acid-containing outer membranes.

The N-terminal domain of OmpATb is required for membrane translocation and pore-forming activity in mycobacteria

OmpATb is the prototype of a new family of porins in Mycobacterium tuberculosis and Mycobacterium bovis BCG. Although the pore-forming activity of this protein has been clearly established by using recombinant protein produced in Escherichia coli, characterization of the native porin has been hampered by the scarce amount of protein present in the M. tuberculosis detergent extracts. To this aim, we have developed a protocol to overproduce and obtain high yields of OmpATb in both Mycobacterium smegmatis and M. bovis BCG. The protein could be extracted and purified from the cell wall fraction and subsequently used for analysis of the pore-forming activity in multichannel and single-channel conductance experiments. Our results indicate that OmpATb produced in mycobacteria presents an average conductance value of 1,600+/-100 pS, slightly higher than that of OmpATb produced in E. coli, suggesting the occurrence of OmpATb in a highly ordered organization within the mycobacterial cell wall. In contrast to OmpATb, a truncated form lacking the first 72 amino acids (OmpATb73-326) was essentially found in the cytosol and was not active in planar lipid bilayers. This suggested that the N-terminal domain of OmpATb could participate in targeting of OmpATb to the cell wall. This was further confirmed by analyzing M. smegmatis clones expressing a chimeric protein consisting of a fusion between the N-terminal domain of OmpATb and the E. coli PhoA reporter. The present study shows for the first time that the N terminus of OmpATb is required for targeting the porin to the cell wall and also appears to be essential for its pore-forming activity.

Characterization of nanostructured surfaces generated by reconstitution of the porin MspA from Mycobacterium smegmatis

Nanostructures with long-term stability at the surface of gold electrodes are generated by reconstituting the porin MspA from Mycobacterium smegmatis into a specially designed monolayer of long-chain lipid surfactant on gold. Tailored surface coverage of gold electrodes with long-chain surfactants is achieved by electrochemically assisted deposition of organic thiosulfates (Bunte salts). The subsequent reconstitution of the octameric-pore MspA is guided by its extraordinary self-assembling properties. Importantly, electrochemical reduction of copper(II) yields copper nanoparticles within the MspA nanopores. Electrochemical impedance spectroscopy, reflection electron microscopy, and atomic force microscopy (AFM) show that: 1) the MspA pores within the self-assembled monolayer (SAM) are monodisperse and electrochemically active, 2) MspA reconstitutes in SAMs and with a 10-nm thickness, 3) AFM is a suitable method to detect pores within SAMs, and 4) the electrochemical reduction of Cu2+ to Cu0 under overpotential conditions starts within the MspA pores.

Rooting the tree of life by transition analyses

BACKGROUND

Despite great advances in clarifying the family tree of life, it is still not agreed where its root is or what properties the most ancient cells possessed--the most difficult problems in phylogeny. Protein paralogue trees can theoretically place the root, but are contradictory because of tree-reconstruction artefacts or poor resolution; ribosome-related and DNA-handling enzymes suggested one between neomura (eukaryotes plus archaebacteria) and eubacteria, whereas metabolic enzymes often place it within eubacteria but in contradictory places. Palaeontology shows that eubacteria are much more ancient than eukaryotes, and, together with phylogenetic evidence that archaebacteria are sisters not ancestral to eukaryotes, implies that the root is not within the neomura. Transition analysis, involving comparative/developmental and selective arguments, can polarize major transitions and thereby systematically exclude the root from major clades possessing derived characters and thus locate it; previously the 20 shared neomuran characters were thus argued to be derived, but whether the root was within eubacteria or between them and archaebacteria remained controversial.

RESULTS

I analyze 13 major transitions within eubacteria, showing how they can all be congruently polarized. I infer the first fully resolved prokaryote tree, with a basal stem comprising the new infrakingdom Glidobacteria (Chlorobacteria, Hadobacteria, Cyanobacteria), which is entirely non-flagellate and probably ancestrally had gliding motility, and two derived branches (Gracilicutes and Unibacteria/Eurybacteria) that diverged immediately following the origin of flagella. Proteasome evolution shows that the universal root is outside a clade comprising neomura and Actinomycetales (proteates), and thus lies within other eubacteria, contrary to a widespread assumption that it is between eubacteria and neomura. Cell wall and flagellar evolution independently locate the root outside Posibacteria (Actinobacteria and Endobacteria), and thus among negibacteria with two membranes. Posibacteria are derived from Eurybacteria and ancestral to neomura. RNA polymerase and other insertions strongly favour the monophyly of Gracilicutes (Proteobacteria, Planctobacteria, Sphingobacteria, Spirochaetes). Evolution of the negibacterial outer membrane places the root within Eobacteria (Hadobacteria and Chlorobacteria, both primitively without lipopolysaccharide): as all phyla possessing the outer membrane beta-barrel protein Omp85 are highly probably derived, the root lies between them and Chlorobacteria, the only negibacteria without Omp85, or possibly within Chlorobacteria.

CONCLUSION

Chlorobacteria are probably the oldest and Archaebacteria the youngest bacteria, with Posibacteria of intermediate age, requiring radical reassessment of dominant views of bacterial evolution. The last ancestor of all life was a eubacterium with acyl-ester membrane lipids, large genome, murein peptidoglycan walls, and fully developed eubacterial molecular biology and cell division. It was a non-flagellate negibacterium with two membranes, probably a photosynthetic green non-sulphur bacterium with relatively primitive secretory machinery, not a heterotrophic posibacterium with one membrane.

Protein thermal stability and phospholipid–protein interaction investigated by capillary isoelectric focusing with whole column imaging detection

CIEF with whole column imaging detection (WCID) is an attractive technique for studying protein reaction and protein-ligand interaction due to its fast separation, simple operation, and high efficiency. In this study, two interesting applications by the CIEF-WCID were developed, involving the study of protein thermal stability and phospholipid-protein interaction. Four proteins (beta-lactoglobulin B, trypsin inhibitor, phosphorylase b, and trypsinogen) with different pI, and two types of phospholipids, including phosphatidylcholine (PC) and phosphatidylserine (PS), were used for this purpose. First, the altered CIEF profiles of four proteins were exhibited due to conformational changes resulting from protein denaturation induced by a high incubation temperature at 60 degrees C. It was demonstrated that the addition of a zwitterionic phospholipid (PC) played a crucial role in the thermal stability of targeted proteins, especially for trypsin inhibitor whose thermal stability was promoted with the addition of the PC vesicles at 60 degrees C. Second, the zwitterionic (PC) and acidic (PS) phospholipids displayed completely different interactions with the proteins. The addition of PS vesicles modified the zwitterionic phospholipids to carry negative charges, which correspondingly changed the interaction between the phospholipid and the protein. Our study demonstrates that the CIEF-WCID is a powerful approach to study protein reaction and protein-ligand interaction with high efficiency, high selectivity, and fast separation.

Analysis of outer membrane proteome ofEscherichia coli related to resistance to ampicillin and tetracycline

The elucidation of the molecular details of antibiotic resistance will lead to improvements in extending the efficacy of current antimicrobials. In the current study, proteomic methodologies were applied to characterize functional outer membrane proteins (Omps) of E. coli K-12 responded to tetracycline and ampicillin resistance for understanding of universal pathways that form barriers for antimicrobial agents. For this purpose, E. coli K-12 expressional outer membrane proteome was characterized and identified with the use of 2-DE and MALDI-TOF/MS methods. Then, differential Omps due to tetracycline or ampcilin resistance were determined by comparison between tetracycline minimum inhibitory concentration (MIC)10, ampicillin MIC10, control0 and control10, showing 9 proteins with 11 spots for tetracycline and 8 protein with 9 spots for ampicillin, showing a difference in only 1 protein (decreased LamB in tetracyclin) between the two antibiotics. Among the proteins, 3 were known as antibiotic-resistant proteins, including TolC, OmpC and YhiU, while FimD precursor, LamB, Tsx, YfiO, OmpW, NlpB were first reported here to be antibiotic-resistance-related proteins. Our findings will be helpful for further understanding of antibiotic-resistant mechanism(s). This study also shows that the combination of Omp purification methods certainly contributes the sensitivity of Omp detection.

Topology of the porin MspA in the outer membrane of Mycobacterium smegmatis

MspA is the major porin of Mycobacterium smegmatis mediating the exchange of hydrophilic solutes across the outer membrane (OM). It is the prototype of a new family of octameric porins with a single central channel of 9.6 nm in length and consists of two hydrophobic beta-barrels of 3.7 nm in length and a more hydrophilic, globular rim domain. The length of the hydrophobic domain of MspA does not match the thicknesses of mycobacterial OMs of 5-12 nm as derived from electron micrographs. Further, the membrane topology of MspA is unknown as it is for any other mycobacterial OM protein. We used MspA as a molecular ruler to define the boundaries of the OM of M. smegmatis by surface labeling of single cysteine mutants. Seventeen mutants covered the surface of the rim domain and were biotinylated with a membrane-impermeable reagent. The label efficiencies in vitro were remarkably similar to the predicted accessibilities of the cysteines. By contrast, six of these mutants were protected from biotinylation in M. smegmatis cells. Tryptophan 21 defines a horizontal plane that dissects the surface-exposed versus the membrane-protected residues of MspA. The 8 phenylalanines at position 99 form a ring at the periplasmic end of the hydrophobic beta-barrel domain. These results indicated that (i) the membrane boundaries of MspA are defined by aromatic girdles as in porins of Gram-negative bacteria and (ii) loops and a 3.4-nm long part of the hydrophilic rim domain are embedded into the OM of M. smegmatis. This is the first report suggesting that elements other than hydrophobic alpha-helices or beta-sheets are integrated into a lipid membrane.

Porins limit the intracellular persistence of Mycobacterium smegmatis

The genus Mycobacterium comprises highly pathogenic as well as opportunistic or apathogenic species exhibiting a great variability with respect to their ability to persist or multiply within monocytic host cells. The impact of the permeability of the mycobacterial outer membrane on intracellular persistence was studied. For this purpose, a Mycobacterium smegmatis mutant with a deletion of the major porin gene mspA and a second mutant lacking mspA and the homologous porin gene mspC were used. Deletion of mspA together with mspC significantly enhanced intracellular persistence in murine bone marrow macrophages, the mouse macrophage cell line J774A.1 and Acanthamoeba castellanii. Complementation of mspA in the porin mutant strains resulted in restoration of the wild-type phenotype with respect to intracellular persistence. This is the first report to show that the deletion of porins of mycobacteria results in improved persistence in eukaryotic cells, demonstrating that the intracellular persistence of M. smegmatis depends upon the permeability of the outer membrane.

Orientation within the exosporium and structural stability of the collagen-like glycoprotein BclA of Bacillus anthracis

Bacillus anthracis spores, which cause anthrax, are enclosed by an exosporium consisting of a basal layer and an external hair-like nap. The filaments of the nap are composed of BclA, a glycoprotein containing distinct N-terminal (NTD) and C-terminal (CTD) domains separated by an extended collagen-like central region. In this study, we used immunogold electron microscopy to show that the CTD of BclA forms the distal end of each filament of the hair-like nap, indicating that the NTD is attached to the basal layer. Ten randomly chosen anti-BclA monoclonal antibodies, raised against spores or exosporium, reacted with the CTD, consistent with its exterior location. We showed that recombinant BclA (rBclA), encoded by the B. anthracis Sterne strain and synthesized in Escherichia coli, forms a collagen-like triple helix as judged by collagenase sensitivity and circular dichroism spectroscopy. In contrast, native BclA in spores was resistant to collagenase digestion. Thermal denaturation studies showed that the collagen-like region of rBclA exhibited a melting temperature (T(m)) of 37 degrees C, like mammalian collagen. However, rBclA trimers exhibited T(m) values of 84 degrees C and 95 degrees C in buffer with and without sodium dodecyl sulfate, respectively. CTD trimers exhibited the same T(m) values, indicating that the high temperature and detergent resistances of rBclA were due to strong CTD interactions. We observed that CTD trimers are resistant to many proteases and readily form large crystalline sheets. Structural data indicate that the CTD is composed of multiple beta strands. Taken together, our results suggest that BclA and particularly its CTD form a rugged shield around the spore.

Overexpression, refolding, and purification of the major immunodominant outer membrane porin OmpC from Salmonella typhi: characterization of refolded OmpC

The major immunodominant integral outer membrane protein C (OmpC) from Salmonella typhi Ty21a was overexpressed, without the signal peptide, in Escherichia coli. The protein aggregates as inclusion bodies (IBs) in the cytoplasm. OmpC from IBs was solubilized with 4 M urea and refolded. This involved rapid dilution of unfolded OmpC into a refolding buffer containing polyoxyethylene-9-lauryl ether (C(12)E(9)) and glycerol. The refolded OmpC (rfOmpC) was shown to be structurally similar to the native OmpC by SDS-PAGE, Western blotting, tryptic digestion, ultrafiltration, circular dichroism, and fluorescence spectroscopic techniques. Crystals of rfOmpC were obtained in preliminary crystallization trials. The rfOmpC also sets a stage for rational design by recombinant DNA technology for vaccine design and high resolution structure determination.

Thermal stability of outer membrane protein porin fromParacoccus denitrificans: FT-IR as a spectroscopic tool to study lipid-protein interaction

Lipid protein interactions play a key role in the stability and function of various membrane proteins. Earlier we have reported the extreme thermal stability of porin from Paracoccus denitrificans reconstituted into liposomes. Here, we used Fourier transform infrared spectroscopy for a label free analysis of the global secondary structural changes and local changes in the tyrosine microenvironment. Our results show that a mixed lipid system (non-uniform bilayer) optimizes the thermal stability of porin as compared to the porin in pure lipids (uniform bilayer) or detergent micelles. This is in line with the fact that the bacterial outer membrane is a dynamic system made up of lipids of varying chain lengths, head groups and the barrel wall height contacting the membrane is uneven.

The porin MspA from Mycobacterium smegmatis improves growth of Mycobacterium bovis BCG

Mycobacteria are characterized by an extremely thick hydrophobic cell wall restricting the permeability for small hydrophilic compounds. Recently, a new efficient porin (MspA) has been identified in Mycobacterium smegmatis, which is lacking in slow-growing mycobacteria. Since we were interested in investigating the influence of porins on growth of slow-growing Mycobacterium bovis BCG, we inserted a 3429 bp DNA fragment from M. smegmatis carrying the mspA gene in an integrative vector and transferred it into M. bovis BCG. Expression of mspA in the BCG derivative was shown by RT-PCR and Western blot. Quantification of bacterial growth on agar plates demonstrated two- to four-fold better growth of the BCG derivative with the transferred DNA compared with the reference strain. Transposon mutagenesis proved the mspA gene to be responsible for the growth enhancement. Intracellular multiplication of the BCG derivative in the mouse macrophage cell line J774 and the human pneumocyte cell line A549 was also clearly enhanced pointing to a possible role of porins in the interaction of mycobacteria with their hosts.

Molecular basis of bacterial outer membrane permeability revisited

Gram-negative bacteria characteristically are surrounded by an additional membrane layer, the outer membrane. Although outer membrane components often play important roles in the interaction of symbiotic or pathogenic bacteria with their host organisms, the major role of this membrane must usually be to serve as a permeability barrier to prevent the entry of noxious compounds and at the same time to allow the influx of nutrient molecules. This review summarizes the development in the field since our previous review (H. Nikaido and M. Vaara, Microbiol. Rev. 49:1-32, 1985) was published. With the discovery of protein channels, structural knowledge enables us to understand in molecular detail how porins, specific channels, TonB-linked receptors, and other proteins function. We are now beginning to see how the export of large proteins occurs across the outer membrane. With our knowledge of the lipopolysaccharide-phospholipid asymmetric bilayer of the outer membrane, we are finally beginning to understand how this bilayer can retard the entry of lipophilic compounds, owing to our increasing knowledge about the chemistry of lipopolysaccharide from diverse organisms and the way in which lipopolysaccharide structure is modified by environmental conditions.

Mycobacterial porins--new channel proteins in unique outer membranes

Mycobacteria protect themselves with an outer lipid bilayer, which is the thickest biological membrane hitherto known and has an exceptionally low permeability rendering mycobacteria intrinsically resistant to many antibiotics. Pore proteins spanning the outer membrane mediate the diffusion of hydrophilic nutrients. Mycobacterium tuberculosis possesses at least two porins in addition to the low activity channel protein OmpATb. OmpATb is essential for adaptation of M. tuberculosis to low pH and survival in macrophages and mice. The channel activity of OmpATb is likely to play a major role in the defence of M. tuberculosis against acidification within the phagosome of macrophages. MspA is the main porin of Mycobacterium smegmatis. It forms a tetrameric complex with a single central pore of 10 nm length and a cone-like structure. This structure differs clearly from that of the trimeric porins of Gram-negative bacteria, which form one 4 nm long pore per monomer. The 45-fold lower number of porins compared to Gram-negative bacteria and the exceptional length of the pores are two major determinants of the low permeability of the outer membrane of M. smegmatis for hydrophilic solutes. The importance of the synergism between slow transport through the porins and drug efflux or inactivation for the development of drugs against M. tuberculosis is discussed.