Recent developments in the production and applications of bacterial cellulose fibers and nanocrystals

Inducible biosynthesis of bacterial cellulose in recombinant Enterobacter sp. FY-07

Bacterial cellulose (BC) is an extracellular polysaccharide with myriad unique properties, such as high purity, water-holding capacity and biocompatibility, making it attractive in materials science. However, genetic engineering techniques for BC-producing microorganisms are rare. Herein, the electroporation-based gene transformation and the λ Red-mediated gene knockout method with a nearly 100 % recombination efficiency were established in the fast-growing and BC hyperproducer Enterobacter sp. FY-07. This genetic manipulation toolkit was validated by inactivating the protein subunit BcsA in the cellulose synthase complex. Subsequently, the inducible BC-producing strains from glycerol were constructed through inducible expression of the key gene fbp in the gluconeogenesis pathway, which recovered >80 % of the BC production. Finally, the BC properties analysis results indicated that the induced-synthesized BC pellicles were looser, more porous and reduced crystallinity, which could further broaden the application prospects of BC. To our best knowledge, this is the first attempt to construct the completely inducible BC-producing strains. Our work paves the way for increasing BC productivity by metabolic engineering and broadens the available fabrication methods for BC-based advanced functional materials.

Preparation of nanocellulose and its applications in wound dressing: A review

Nanocellulose, as a nanoscale polymer material, has garnered significant attention worldwide due to its numerous advantages including excellent biocompatibility, thermal stability, non-toxicity, large specific surface area, and good hydrophilicity. Various methods can be employed for the preparation of nanocellulose. Traditional approaches such as mechanical, chemical, and biological methods possess their own distinct characteristics and limitations. However, with the growing deterioration of our living environment, several green and environmentally friendly preparation techniques have emerged. These novel approaches adopt eco-friendly technologies or employ green reagents to achieve environmental sustainability. Simultaneously, there is a current research focus on optimizing traditional nanocellulose preparation methods while addressing their inherent drawbacks. The combination of mechanical and chemical methods compensates for the limitations associated with using either method alone. Nanocellulose is widely used in wound dressings owing to its exceptional properties, which can accelerate the wound healing process and reduce patient discomfort. In this paper, the principle, advantages and disadvantages of each preparation method of nanocellulose and the research findings in recent years are introduced Moreover, this review provides an overview of the utilization of nanocellulose in wound dressing applications. Finally, the prospective trends in its development alongside corresponding preparation techniques are discussed.

Overlooked Promising Green Features of Electrospun Cellulose-Based Fibers in Lithium-Ion Batteries

Lithium-ion batteries (LIBs) are accounted as promising power tools, applicable in a wide range of energy-based equipment, from portable devices to electric vehicles. Meanwhile, approaching a cost-effective, environmentally friendly, and safe LIB array has remained sluggish yet. In this regard, cellulose, as a nontoxic natural renewable polymer, has provided a stable and cohesive electrode structure with excellent mechanical stability and reduced electrode cracking or delamination during cycling. Additionally, the porous configuration of the cellulose allows for efficient and faster ion transport as a separator component. Miniaturizing cellulose and its derivatives have revealed more fabulous characteristics for the anode, cathode, and separator resulting from the increased surface-to-volume ratio and superior porosity, as well as their thin and lightweight architectures. The focal point of this review outlines the challenges relating to the extraction and electrospinning of cellulose-based nanofibers. Additionally, the efforts to employ these membranes as the LIBs' components are elucidated. Correspondingly, despite the great performance of cellulose-based LIB structures, a research gap is sensed in this era, possibly due to the difficulties in processing the electrospun cellulose fibers. Hence, this review can provide a source of recent advancements and innovations in cellulose-based electrospun LIBs for researchers who aim to develop versatile battery structures using green materials, worthwhile, and eco-friendly processing techniques.

Processing of Grape Bagasse and Potato Wastes for the Co-Production of Bacterial Cellulose and Gluconic Acid in an Airlift Bioreactor

The feasibility of using Garnacha Tintorera bagasse and potato wastes as substrate for the co-production of bacterial cellulose (BC) and gluconic acid by Komagataibacter xylinus fermentation was studied. Firstly, the sulfuric acid hydrolysis of bagasse was evaluated depending on the sulfuric acid concentration (2-4%), temperature (105-125 °C), and time (60-180 min). The bagasse hydrolysates showed a low monosaccharide concentration profile: glucose 3.24-5.40 g/L; cellobiose 0.00-0.48 g/L; arabinose 0.66-1.64 g/L and xylose 3.24-5.40 g/L. However, the hydrolysis treatment enhanced the total phenolic content of the bagasse extract (from 4.39 up to 12.72 mg GAE/g dried bagasse). The monosaccharide profile of the culture medium was improved by the addition of potato residues. From a medium containing bagasse-potato powder (50:50 w/w) and optimal hydrolysate conditions (125 °C for 60 min and 2% H2SO4), the composition of glucose increased up to 30.14 g/L. After 8 days of fermentation in an airlift bioreactor by Komagataibacter xylinus, 4 g dried BC/L and 26.41 g gluconic acid/L were obtained with a BC productivity of 0.021 g/L·h, an efficiency of 0.37 g/g and yield of 0.47 g/g. The productivity of gluconic acid was 0.14 g/L·h with an efficiency of 0.93 g/g and yield of 0.72 g/g. This research demonstrates the promising potential of utilizing waste materials, specifically Garnacha Tintorera bagasse and potato residues, as sustainable substrates for the co-production of valuable bioproducts, such as bacterial cellulose and gluconic acid.

In Situ Fermentation of an Ultra-Strong, Microplastic-Free, and Biodegradable Multilayer Bacterial Cellulose Film for Food Packaging

Cellulose-based food packaging has a significant importance in reducing plastic pollution and also ensuring our safety from microplastics. Nonetheless, lignocellulose necessitates sophisticated physical and chemical treatments to be fashioned into a satisfactory food packaging, thus leading to extra consumption and operations. Here, we present a gel-assisted biosynthesis approach for the in situ production of bacterial cellulose (BC) that can be directly applied to food packaging. Komagataeibacter sucrofermentans is homogeneously distributed in the gellan gum (GG)-assisted culture system, and the BC/GG film with an even surface is attained. Then, the BC/GG film is integrated with an antibacterial layer containing a quaternary ammonium chitosan microsphere (QM) through an in situ spray biosynthesis method. The resulting BC/GG/QM multilayer film combines the barrier properties and antibacterial activity. The method for in situ biosynthesis is green, efficient, and convenient to endow the multilayer film with excellent barrier capacity (1.76 g·mm·m-2·d-1·KPa-1 at RH 75%), high mechanical properties (strength 462 MPa), and antibacterial activity (>90% against Escherichia coli O157:H7 and Staphylococcus aureus). In terms of food preservation, the overall performance of the BC/GG/QM multilayer film is better than the commercial petroleum-based film and lignocellulose-derived film. This work proffers a novel strategy to produce a more beneficial and eco-friendly multilayer film via in situ biosynthesis, which manifests great utility in the field of food packaging.

Environment friendly emerging techniques for the treatment of waste biomass: a focus on microwave and ultrasonication processes

In the recent past, an increasing interest is mostly observed in using microwave and ultrasonic irradiation to aid the biological conversion of waste materials into value-added products. This study is focused on various individual impacts of microwaves and ultrasonic waves for the treatment of biomass before the synthesis of value-added products. Following, a comprehensive review of the mechanisms governing microwaves and ultrasonication as the treatment methods, their effects on biomass disruption, solubilization of organic matter, modification of the crystalline structure, enzymatic hydrolysis and production of reducing sugars was performed. However, based on the lab-scale experiments evaluated, microwaves and ultrasonication were studied to be economically and energetically ineffective despite their beneficial effects on the waste biomass. This article reviews some of the difficulties associated with using microwaves and ultrasonic irradiation for the efficient processing of waste biomasses and identified some potential directions for future study.

Bacterial Cellulose Nanofibril-Based Pickering Emulsions: Recent Trends and Applications in the Food Industry

The Pickering emulsion stabilized by food-grade colloidal particles has developed rapidly in recent decades and attracts extensive attention for potential applications in the food industry. Bacterial cellulose nanofibrils (BCNFs), as green and sustainable colloidal nanoparticles derived from bacterial cellulose, have various advantages for Pickering emulsion stabilization and applications due to their unique properties, such as good amphiphilicity, a nanoscale fibrous network, a high aspect ratio, low toxicity, excellent biocompatibility, and sustainability. This review provides a comprehensive overview of the recent advances in the Pickering emulsion stabilized by BCNF particles, including the classification, preparation method, and physicochemical properties of diverse BCNF-based particles as Pickering stabilizers, as well as surface modifications with other substances to improve their emulsifying performance and functionality. Additionally, this paper highlights the stabilization mechanisms and provides potential food applications of BCNF-based Pickering emulsions, such as nutrient encapsulation and delivery, edible coatings and films, fat substitutes, etc. Furthermore, the safety issues and future challenges for the development and food-related applications of BCNFs-based Pickering emulsions are also outlined. This work will provide new insights and more ideas on the development and application of nanofibril-based Pickering emulsions for researchers.

Production and Characterization of Active Bacterial Cellulose Films Obtained from the Fermentation of Wine Bagasse and Discarded Potatoes by Komagateibacter xylinus

Potato waste, such as peels, broken or spoiled potatoes and grape bagasse residues from the winery industry, can be used for the biotechnological production of high-value products. In this study, green, sustainable and highly productive technology was developed for the production of antioxidant bacterial cellulose (BC). The aim of this work was to evaluate the feasibility of a low-cost culture medium based on wine bagasse and potato waste to synthesize BC. Results show that the production of BC by Komagateibacter xylinus in the GP culture medium was five-fold higher than that in the control culture medium, reaching 4.0 g/L BC in 6 days. The compounds of the GP culture medium improved BC production yield. The mechanical, permeability, swelling capacity, antioxidant capacity and optical properties of the BC films from the GP medium were determined. The values obtained for the tensile and puncture properties were 22.77 MPa for tensile strength, 1.65% for elongation at break, 910.46 MPa for Young's modulus, 159.31 g for burst strength and 0.70 mm for distance to burst. The obtained films showed lower permeability values (3.40 × 10^-12 g/m·s·Pa) than those of other polysaccharide-based films. The BC samples showed an outstanding antioxidant capacity (0.31-1.32 mg GAE/g dried film for total phenolic content, %DPPH^• 57.24-78.00% and %ABTS^•+ 89.49-86.94%) and excellent UV-barrier capacity with a transmittance range of 0.02-0.38%. Therefore, a new process for the production of BC films with antioxidant properties was successfully developed.

Biological Synthesis and Process Monitoring of an Aggregation-Induced Emission Luminogen-Based Fluorescent Polymer

As the most abundant and renewable biopolymer on earth, cellulose can be functionalized for various advanced applications by chemical modification. In addition, fluorescent polymers with aggregation-induced emission (AIE) are generally prepared using chemical approaches, and the biosynthesis of AIE-active polymers are rarely investigated. Herein, fluorescent cellulose was successfully synthesized by bacterial fermentation, where glucosamine-modified AIE luminogen was incorporated into cellulose to achieve AIE-active biopolymers. Excitingly, real-time visualization of the synthetic process was realized, which is crucial for investigating the process of bacterial fermentation. The biosynthesized cellulose exhibited better performance with uniform fluorescence distribution and high stability, compared with that prepared by physical absorption. Additionally, fluorescent mats were fabricated by electrospinning of AIE-active cellulose, demonstrating its great potential applications in flexible display and tissue engineering.

Enhancing for Bagasse Enzymolysis via Intercrystalline Swelling of Cellulose Combined with Hydrolysis and Oxidation

To overcome the biological barriers formed by the lignin–carbohydrate complex for releasing fermentable sugars from cellulose by enzymolysis is both imperative and challenging. In this study, a strategy of intergranular swelling of cellulose combined with hydrolysis and oxidation was demonstrated. Pretreatment of the bagasse was evaluated by one bath treatment with phosphoric acid and hydrogen peroxide. The chemical composition, specific surface area (SSA), and pore size of bagasse before and after pretreatment were investigated, while the experiments on the adsorption equilibrium of cellulose to cellulase and reagent reuse were also performed. Scanning electron microscopy (SEM) and high-performance liquid chromatography (HPLC) were employed for microscopic morphology observations and glucose analysis, respectively. The results showed that pretreated bagasse was deconstructed into cellulose with a nanofibril network, most of the hemicellulose (~100%) and lignin (~98%) were removed, and the SSA and void were enlarged 11- and 5-fold, respectively. This simple, mild preprocessing method enhanced cellulose accessibility and reduced the biological barrier of the noncellulose component to improve the subsequent enzymolysis with a high glucose recovery (98.60%).

Recent advancement in isolation, processing, characterization and applications of emerging nanocellulose: A review

The emergence of nanocellulose from various natural resources as a promising nanomaterial has been gaining interest for a wide range application. Nanocellulose serves as an excellent candidate since it contributes numerous superior properties and functionalities. In this review, details of the three main nanocellulose categorised: cellulose nanocrystal (CNC), cellulose nanofibril (CNF), and bacterial nanocellulose (BNC) have been described. We focused on the preparation and isolation techniques to produce nanocellulose including alkaline pre-treatment, acid hydrolysis, TEMPO-mediated oxidation, and enzymatic hydrolysis. The surface modification of nanocellulose through esterification, silylation, amidation, phosphorylation, and carboxymethylation to improve the diverse applications has also been reviewed. Some invigorating perspectives on the applications, challenges, and future directions on the relevant issues regarding nanocellulose are also presented.

Bacterial Cellulose and ECM Hydrogels: An Innovative Approach for Cardiovascular Regenerative Medicine

Cardiovascular diseases are considered the leading cause of death in the world, accounting for approximately 85% of sudden death cases. In dogs and cats, sudden cardiac death occurs commonly, despite the scarcity of available pathophysiological and prevalence data. Conventional treatments are not able to treat injured myocardium. Despite advances in cardiac therapy in recent decades, transplantation remains the gold standard treatment for most heart diseases in humans. In veterinary medicine, therapy seeks to control clinical signs, delay the evolution of the disease and provide a better quality of life, although transplantation is the ideal treatment. Both human and veterinary medicine face major challenges regarding the transplantation process, although each area presents different realities. In this context, it is necessary to search for alternative methods that overcome the recovery deficiency of injured myocardial tissue. Application of biomaterials is one of the most innovative treatments for heart regeneration, involving the use of hydrogels from decellularized extracellular matrix, and their association with nanomaterials, such as alginate, chitosan, hyaluronic acid and gelatin. A promising material is bacterial cellulose hydrogel, due to its nanostructure and morphology being similar to collagen. Cellulose provides support and immobilization of cells, which can result in better cell adhesion, growth and proliferation, making it a safe and innovative material for cardiovascular repair.

Antimicrobial Properties of Bacterial Cellulose Films Enriched with Bioactive Herbal Extracts Obtained by Microwave-Assisted Extraction

The use of bacterial cellulose (BC) as scaffold for active biofilms is one of the most interesting applications, especially for the biomedical and food industries. However, there are currently few studies evaluating the potential of incorporating herbal extracts into various biomaterials, including BC. Thus, the aim of this study is to report a screening of the total phenolic content and antioxidant and antimicrobial activity of ethanolic extracts of oregano, rosemary, parsley, and lovage. At the same time, the bioactive potential of BC enriched with the four ethanolic extracts is described. Microwave-assisted extraction was used to extract bioactive compounds from the four selected herbs. The physical, mechanical, structural, and chemical properties of BC were also assessed. Next, BC was enriched with the extracts, and their effect against Escherichia coli, Staphylococcus aureus, and Candida albicans was evaluated. The results showed that the bioactivity of the herbs varied significantly, with rosemary extract being the most bioactive. The BC films possessed good mechanical properties, and a three-dimensional network fibrillar structure appropriate for ethanolic-extract incorporation. The BC samples enriched with rosemary extracts had the highest antibacterial activity against S. aureus, while E. coli. and C. albicans seemed to be resistant to all extracts, regardless of herbs.

Acetobacter senegalensis Isolated from Mango Fruits: Its Polyphasic Characterization and Adaptation to Protect against Stressors in the Industrial Production of Vinegar: A Review

It has been more than a decade since Acetobacter senegalensis was isolated, identified, and described as a thermotolerant strain of acetic acid bacteria. It was isolated from mango fruits in Senegal and used for industrial vinegar production in developing countries, mainly in sub-Saharan Africa. The strain was tested during several spirit vinegar fermentation processes at relatively high temperatures in accordance with African acclimation. The upstream fermentation process had significant stress factors, which are highlighted in this review so that the fermentation process can be better controlled. Due to its high industrial potential, this strain was extensively investigated by diverse industrial microbiologists worldwide; they concentrated on its microbiological, physiological, and genomic features. A research group based in Belgium proposed an important project for the investigation of the whole-genome sequence of A. senegalensis. It would use a 454-pyrosequencing technique to determine and corroborate features that could give this strain significant diverse bioindustrial applications. For instance, its application in cocoa bean fermentation has made it a more suitable acetic acid bacterium for the making of chocolate than Acetobacter pasteurianus. Therefore, in this paper, we present a review that summarizes the current research on A. senegalensis at its microbial and genomic levels and also its specific bioindustrial applications, which can provide economic opportunities for African agribusiness.

Bacterial Cellulose (BC) and BC Composites: Production and Properties

The synthesis of bacterial cellulose (BC) by Komagataeibacter xylinus strain B-12068 was investigated on various C-substrates, under submerged conditions with stirring and in static surface cultures. We implemented the synthesis of BC on glycerol, glucose, beet molasses, sprat oil, and a mixture of glucose with sunflower oil. The most productive process was obtained during the production of inoculum in submerged culture and subsequent growth of large BC films (up to 0.2 m2 and more) in a static surface culture. The highest productivity of the BC synthesis process was obtained with the growth of bacteria on molasses and glycerol, 1.20 and 1.45 g/L per day, respectively. We obtained BC composites with silver nanoparticles (BC/AgNPs) and antibacterial drugs (chlorhexidine, baneocin, cefotaxime, and doripenem), and investigated the structure, physicochemical, and mechanical properties of composites. The disc-diffusion method showed pronounced antibacterial activity of BC composites against E. coli ATCC 25922 and S. aureus ATCC 25923.

Applications of infrared spectroscopy in polysaccharide structural analysis: Progress, challenge and perspective

•

Functional properties of polysaccharides depend on their structural features.

•

IR spectroscopy is widely used in polysaccharide structural analysis.

•

Classical applications of IR spectroscopy in polysaccharide are reviewed.

•

IR integrating techniques can considerably expand its application scope.

Polysaccharides are important biomacromolecules with numerous beneficial functions and a wide range of industrial applications. Functions and properties of polysaccharides are closely related to their structural features. Infrared (IR) spectroscopy is a well-established technique which has been widely applied in polysaccharide structural analysis. In this paper, the principle of IR and interpretation of polysaccharide IR spectrum are briefly introduced. Classical applications of IR spectroscopy in polysaccharide structural elucidation are reviewed from qualitative and quantitative aspects. Some advanced IR techniques including integrating with mass spectrometry (MS), microscopy and computational chemistry are introduced and their applications are emphasized. These emerging techniques can considerably expand application scope of IR, thus exert a more important effect on carbohydrate characterization. Overall, this review seeks to provide a comprehensive insight to applications of IR spectroscopy in polysaccharide structural analysis and highlights the importance of advanced IR-integrating techniques.

Production of bacterial cellulose from glycerol: the current state and perspectives

Current research in industrial microbiology and biotechnology focuses on the production of biodegradable microbial polymers as an environmentally friendly alternative to the still dominant fossil hydrocarbon-based plastics. Bacterial cellulose (BC) is important among microbial polymers due to its valuable properties and broad applications in variety of fields from medical to industrial technologies. However, the increase in BC production and its wider deployment is still limited by high costs of traditionally used raw materials. It is therefore necessary to focus on less expensive inputs, such as agricultural and industrial by-products or waste including the more extended use of glycerol. It is the environmentally harmful by-product of biofuel production and reducing it will also reduce the risk of environmental pollution. The experimental data obtained so far confirm that glycerol can be used as the renewable carbon source to produce BC through more efficient and environmentally friendly bioprocesses. This review summarizes current knowledge on the use of glycerol for the production of commercially prospective BC, including information on producer cultures, fermentation modes and methods used, nutrient medium composition, cultivation conditions, and bioprocess productivity. Data on the use of some related sugar alcohols, such as mannitol, arabitol, xylitol, for the microbial synthesis of cellulose are also considered, as well as the main methods and applications of glycerol pre-treatment briefly described.

Preparation and characterization of antibacterial bacterial cellulose/chitosan hydrogels impregnated with silver sulfadiazine

Hydrogels with pH sensitivity and stable mechanical and antibacterial properties have many desirable qualities and broad applications. A hydrogel based on bacterial cellulose and chitosan, impregnated with silver sulfadiazine (<1% w/w), was prepared using glutaraldehyde as the crosslinking agent. The presence of SSd was confirmed by Fourier transform infrared spectroscopy. Micropore size, swelling ratio, pH- sensitivity, and gram positive and negative antibacterial properties were studied by disk diffusion and colony forming unit. X-ray diffraction confirmed the presence of amorphous and crystalline regions in the hydrogel matrix following addition of SSd. The elemental composition, morphology, and mechanical properties of the hydrogels were characterized. Incorporation of SSd into bacterial cellulose-chitosan hydrogels significantly improved their mechanical and antibacterial properties. The antibacterial activity against E. coli and S. aureus was evaluated and SSd-BC/Ch hydrogels are more toxic to S. aureus than to E. coli. We use FESEM to observe bacterial morphology before and after exposure to SSd-BC/Ch hydrogels. The BacLight LIVE/DEAD membrane permeability kit is used to evaluate the membrane permeability of bacteria. These antibacterial hydrogels have many promising applications in food packaging, tissue engineering, drug delivery, clinical, biotechnological, and biomedical fields.

Genetic modification for enhancing bacterial cellulose production and its applications

Bacterial cellulose (BC) is higher in demand due to its excellent properties which is attributed to its purity and nano size. Komagataeibacter xylinum is a model organism where BC production has been studied in detail because of its higher cellulose production capacity. BC production mechanism shows involvement of a series of sequential reactions with enzymes for biosynthesis of cellulose. It is necessary to know the mechanism to understand the involvement of regulatory proteins which could be the probable targets for genetic modification to enhance or regulate yield of BC and to alter BC properties as well. For the industrial production of BC, controlled synthesis is desired so as to save energy, hence genetic manipulation opens up avenues for upregulating or controlling the cellulose synthesis in the bacterium by targeting genes involved in cellulose biosynthesis. In this review article genetic modification has been presented as a tool to introduce desired changes at genetic level resulting in improved yield or properties. There has been a lack of studies on genetic modification for BC production due to limited availability of information on whole genome and genetic toolkits; however, in last few years, the number of studies has been increased on this aspect as whole genome sequencing of several Komagataeibacter strains are being done. In this review article, we have presented the mechanisms and the targets for genetic modifications in order to achieve desired changes in the BC production titer as well as its characteristics.

Production and characterization of Komagataeibacter xylinus SGP8 nanocellulose and its calcite based composite for removal of Cd ions

In the present study, fermentative production of bacterial nanocellulose (BNC) by using Komagataeibacter xylinus strain SGP8 and characterization of nanocellulose is presented. The bacterium was able to produce 1.82 g L^-1 of cellulose in the form of pellicle in standard Hestrin-Schramn (HS) medium. The morpho-structural characterization of the BNC using scanning electron microscopy (SEM) and X-ray diffraction (XRD) studies, respectively revealed nanofibrillar structure and high crystallinity index (~86%). The thermogravimetric analysis (TGA) showed the stability of BNC up to 280 °C, further rise in temperature to 350 °C results in depolymerization of the sample. In order to show the applicability of produced BNC, it was modified first using calcite (CaCO₃) and thereafter characterized using SEM, XRD, FTIR, and TGA studies. The BNC-CaCO₃ composites as a sorbent resulted in >99% removal of initial 10 mg L^-1 of Cd (II) at pH 5, 7 and 9 after 12 h of treatment. Moreover, the composite was also found to be competent in removing high concentrations of Cd (25 and 50 mg L^-1) from the solution (69-70%). Overall, the above results suggest that cellulose produced by K. xylinus strain SGP8 showed excellent material properties, and modified BNC (BNC-CaCO₃ composite) could effectively be used for remediation of toxic levels of Cd from the contaminated system.

Bacterial cellulose spheroids as building blocks for 3D and patterned living materials and for regeneration

Engineered living materials (ELMs) based on bacterial cellulose (BC) offer a promising avenue for cheap-to-produce materials that can be programmed with genetically encoded functionalities. Here we explore how ELMs can be fabricated in a modular fashion from millimetre-scale biofilm spheroids grown from shaking cultures of Komagataeibacter rhaeticus. Here we define a reproducible protocol to produce BC spheroids with the high yield bacterial cellulose producer K. rhaeticus and demonstrate for the first time their potential for their use as building blocks to grow ELMs in 3D shapes. Using genetically engineered K. rhaeticus, we produce functionalized BC spheroids and use these to make and grow patterned BC-based ELMs that signal within a material and can sense and report on chemical inputs. We also investigate the use of BC spheroids as a method to regenerate damaged BC materials and as a way to fuse together smaller material sections of cellulose and synthetic materials into a larger piece. This work improves our understanding of BC spheroid formation and showcases their great potential for fabricating, patterning and repairing ELMs based on the promising biomaterial of bacterial cellulose.

Bacterial cellulose is a promising cheap-to-produce programmable engineered living material. Here the authors present a method for production of spheroids for use as engineerable building blocks able to sense and respond to chemical inputs.

The Simple Method of Preparation of Highly Carboxylated Bacterial Cellulose with Ni- and Mg-Ferrite-Based Versatile Magnetic Carrier for Enzyme Immobilization

The bacterial cellulose (BC) is a versatile biopolymer of microbial origin characterized by high purity and unusual water and material properties. However, the native BC contains a low number of functional groups, which significantly limits its further application. The main goal of its effective modification is to use methods that allow the unusual properties of BC to be retained and the desired functional group to be efficiently introduced. In the present study, the new magnetic carrier based on functionalized citric acid (CA) bacterial cellulose was developed and tested to support critical industrial enzymes such as lipase B from Candida antarctica and phospholipase A from Aspergillus oryzae. The applied method allowed BC to be effectively modified by citric acid and a sufficient number of carboxylic groups to be introduced, up to 3.6 mmol of COOH per gram of dry mass of the prepared carrier. The DSC and TGA analyses revealed carrier stability at operational temperatures in the range of 20 °C to 100 °C and substantially influenced the amount of the introduced carboxyl groups on carrier properties. Both enzymes’ immobilization significantly improves their thermal stability at 60 °C without a significant thermal and pH optima effect. The analyzed enzymes showed good operational stability with a significant residual activity after ten cycles of repeated uses. The new magnetic carrier based on highly carboxylated bacterial cellulose has a high application capability as matrix for immobilization the various enzymes of industrial interest.

Macro and Micro Routes to High Performance Bioplastics: Bioplastic Biodegradability and Mechanical and Barrier Properties

On a score sheet for plastics, bioplastics have a medium score for combined mechanical performance and a high score for biodegradability with respect to counterpart petroleum-based plastics. Analysis quickly confirms that endeavours to increase the mechanical performance score for bioplastics would be far more achievable than delivering adequate biodegradability for the recalcitrant plastics, while preserving their impressive mechanical performances. Key architectural features of both bioplastics and petroleum-based plastics, namely, molecular weight (Mw) and crystallinity, which underpin mechanical performance, typically have an inversely dependent relationship with biodegradability. In the case of bioplastics, both macro and micro strategies with dual positive correlation on mechanical and biodegradability performance, are available to address this dilemma. Regarding the macro approach, processing using selected fillers, plasticisers and compatibilisers have been shown to enhance both targeted mechanical properties and biodegradability within bioplastics. Whereas, regarding the micro approach, a whole host of bio and chemical synthetic routes are uniquely available, to produce improved bioplastics. In this review, the main characteristics of bioplastics in terms of mechanical and barrier performances, as well as biodegradability, have been assessed-identifying both macro and micro routes promoting favourable bioplastics' production, processability and performance.

A Theranostic Cellulose Nanocrystal-Based Drug Delivery System with Enhanced Retention in Pulmonary Metastasis of Melanoma

Metastatic melanoma can be difficult to detect until at the advanced state that decreases the survival rate of patients. Several FDA-approved BRAF inhibitors have been used for treatment of metastatic melanoma, but overall therapeutic efficacy has been limited. Lutetium-177 (177 Lu) enables simultaneous tracking of tracer accumulation with single-photon emission computed tomography and radiotherapy. Therefore, the codelivery of 177 Lu alongside chemotherapeutic agents using nanoparticles (NPs) might improve the therapeutic outcome in metastatic melanoma. Cellulose nanocrystals (CNC NPs) can particularly deliver payloads to lung capillaries in vivo. Herein, 177 Lu-labeled CNC NPs loaded with vemurafenib ([177 Lu]Lu-CNC-V NPs) is developed and the therapeutic effect in BRAF V600E mutation-harboring YUMM1.G1 murine model of lung metastatic melanoma is investigated. The [177 Lu]Lu-CNC-V NPs demonstrate favorable radiolabel stability, drug release profile, cellular uptake, and cell growth inhibition in vitro. In vivo biodistribution reveals significant retention of the [177 Lu]Lu-CNC-V NPs in the lung, liver, and spleen. Ultimately, the median survival time of animals is doubly increased after treatment with [177 Lu]Lu-CNC-V NPs compared to control groups. The enhanced therapeutic efficacy of [177 Lu]Lu-CNC-V NPs in the lung metastatic melanoma animal model provides convincing evidence for the potential of clinical translation for theranostic CNC NP-based drug delivery systems after intravenous administration.

Effect of pH Buffer and Carbon Metabolism on the Yield and Mechanical Properties of Bacterial Cellulose Produced by Komagataeibacter hansenii ATCC 53582

Bacterial cellulose (BC) is widely used in the food industry for products such as nata de coco. The mechanical properties of BC hydrogels, including stiffness and viscoelasticity, are determined by the hydrated fibril network. Generally, Komagataeibacter bacteria produce gluconic acids in a glucose medium, which may affect the pH, structure and mechanical properties of BC. In this work, the effect of pH buffer on the yields of Komagataeibacter hansenii strain ATCC 53582 was studied. The bacterium in a phosphate and phthalate buffer with low ionic strength produced a good BC yield (5.16 and 4.63 g/l respectively), but there was a substantial reduction in pH due to the accumulation of gluconic acid. However, the addition of gluconic acid enhanced the polymer density and mechanical properties of BC hydrogels. The effect was similar to that of the bacteria using glycerol in another carbon metabolism circuit, which provided good pH stability and a higher conversion rate of carbon. This study may broaden the understanding of how carbon sources affect BC biosynthesis.

PVA based nanofiber containing CQDs modified with silica NPs and silk fibroin accelerates wound healing in a rat model

In recent years, applying various wound dressings with antibacterial activities to expedite tissue repair stages has gained remarkable attention. The intertwined three-dimensional structure of nanofibers provides unique spaces for carrying drugs and repair agents during the wound healing process. In this research, a carbon quantum dot (CQD)/silica nanoparticle (Si NP)/silk fibroin (SF) nanocomposite was synthesized, and two novel wound dressings, a BC-CQD/Si NP/SF nanocomposite and a PVA-CQD/Si NP/SF nanofiber, were prepared by Spray Printing and Electrospinning methods and successfully characterized. The water-uptake capacity of the BC-CQD/Si NP/SF nanocomposite has been optimized to evaluate its swelling behavior. To determine the antibacterial effects of the synthesized materials both MIC and Optical Density (OD) methods were performed, and the results imply that materials have high antibacterial activity and could successfully inhibit the growth of both S. aureus and E. coli bacteria. Cell toxicity, viability, and proliferation on NIH 3T3 fibroblast cells with the MTT assay have proved that the CQD/Si NP/SF nanocomposite not only has no toxicity but also can accelerate cell viability and proliferation. To assess the effect of the CQD/Si NP/SF nanocomposite on cell migration and in vitro wound healing scratch, a wound assay was performed, and the nanocomposite exhibits the ability to promote wound healing. The PVA-CQD/Si NP/SF nanofiber was used to investigate wound healing in an animal model. The results show that the PVA-CQD/Si NP/SF nanofiber effectively accelerates the skin and hair follicle regeneration. Therefore, the PVA-CQD/Si NP/SF nanofiber is a promising wound dressing for inhibiting bacterial growth and promoting skin wound repair and hair regeneration.

Bacterial Superoleophobic Fibrous Matrices: A Naturally Occurring Liquid-Infused System for Oil-Water Separation

Nanocellulose fibers bioengineered by bacteria are a high-performance three-dimensional cross-linked network which can confine a dispersed liquid medium such as water. The strong chemical and physical interactions of dispersed water molecules with the entangled cellulosic network allow these materials to be ideal substrates for effective liquid separation. This type of phenomenon can be characterized as green with no equivalent precedent; its performance and sustainability relative to other cellulose-based or synthetic membranes are shown herein to be superior. In this work, we demonstrated that the renewable bacterial nanocellulosic membrane can be used as a stable liquid-infused system for the development of soft surfaces with superwettability and special adhesion properties and thus address intractable issues normally encountered by solid surfaces.

Recent Developments in Nanocellulose-Reinforced Rubber Matrix Composites: A Review

Research and development of nanocellulose and nanocellulose-reinforced composite materials have garnered substantial interest in recent years. This is greatly attributed to its unique functionalities and properties, such as being renewable, sustainable, possessing high mechanical strengths, having low weight and cost. This review aims to highlight recent developments in incorporating nanocellulose into rubber matrices as a reinforcing filler material. It encompasses an introduction to natural and synthetic rubbers as a commodity at large and conventional fillers used today in rubber processing, such as carbon black and silica. Subsequently, different types of nanocellulose would be addressed, including its common sources, dimensions, and mechanical properties, followed by recent isolation techniques of nanocellulose from its resource and application in rubber reinforcement. The review also gathers recent studies and qualitative findings on the incorporation of a myriad of nanocellulose variants into various types of rubber matrices with the main goal of enhancing its mechanical integrity and potentially phasing out conventional rubber fillers. The mechanism of reinforcement and mechanical behaviors of these nanocomposites are highlighted. This article concludes with potential industrial applications of nanocellulose-reinforced rubber composites and the way forward with this technology.

Photo-augmented PHB production from CO2 or fructose by Cupriavidus necator and shape-optimized CdS nanorods

Particulate photocatalysts developed for the solar energy-driven reduction of the greenhouse gas CO₂ have a small product range and low specificity. Hybrid photosynthesis expands the number of products with photocatalysts harvesting sunlight and transferring charges to microbes harboring versatile metabolisms for bioproduction. Besides CO₂, abiotic photocatalysts have been employed to increase microbial production yields of reduced compounds from organic carbon substrates. Most single-reactor hybrid photosynthesis systems comprise CdS assembled in situ by microbial activity. This approach limits optimization of the morphology, crystal structure, and crystallinity of CdS for higher performance, which is usually done via synthesis methods incompatible with life. Here, shape and activity optimized CdS nanorods were hydrothermally produced and subsequently applied to Cupriavidus necator for the heterotrophic and autotrophic production of the bioplastic polyhydroxybutyrate (PHB). C. necator with CdS NR under light produced 1.5 times more PHB when compared to the same bacterium with suboptimal commercially-available CdS. Illuminated C. necator with CdS NR synthesized 1.41 g PHB from fructose over 120 h and 28 mg PHB from CO₂ over 48 h. Interestingly, the beneficial effect of CdS NR was specific to C. necator as the metabolism of other microbes often employed for bioproduction including yeast and bacteria was negatively impacted. These results demonstrate that hybrid photosynthesis is more productive when the photocatalyst characteristics are optimized via a separated synthesis process prior to being coupled with microbes. Furthermore, bioproduction improvement by CdS-based photocatalyst requires specific microbial species highlighting the importance of screening efforts for the development of performant hybrid photosynthesis.

Micro- and Nanocellulose in Polymer Composite Materials: A Review

The high demand for plastic and polymeric materials which keeps rising every year makes them important industries, for which sustainability is a crucial aspect to be taken into account. Therefore, it becomes a requirement to makes it a clean and eco-friendly industry. Cellulose creates an excellent opportunity to minimize the effect of non-degradable materials by using it as a filler for either a synthesis matrix or a natural starch matrix. It is the primary substance in the walls of plant cells, helping plants to remain stiff and upright, and can be found in plant sources, agriculture waste, animals, and bacterial pellicle. In this review, we discussed the recent research development and studies in the field of biocomposites that focused on the techniques of extracting micro- and nanocellulose, treatment and modification of cellulose, classification, and applications of cellulose. In addition, this review paper looked inward on how the reinforcement of micro- and nanocellulose can yield a material with improved performance. This article featured the performances, limitations, and possible areas of improvement to fit into the broader range of engineering applications.

An in-situ fabrication of bamboo bacterial cellulose/sodium alginate nanocomposite hydrogels as carrier materials for controlled protein drug delivery

Sodium alginate-bacterial cellulose (SA-BC) is a nanocomposite hydrogel with multi-layered porous surfaces fabricated using an in-situ biosynthesis modification method. The enzymatic hydrolysate (EH) of glycerol-pretreated Moso bamboo (MBEH) was the carbon source for glucose substitution to generate SA-bamboo-BC. SA, a natural biological polysaccharide, was combined with BC at dosages of 0.25%, 0.5%, 0.75% and 1% through hydrogen bonding. Compared to the native BC, the addition of 0.75% SA, termed as SA-bamboo-BC-0.75, enhanced the thermal properties. The dynamic swelling/de-swelling were pH-dependent, with an increased swelling ratio (SR) of 613% observed at pH 7.4 but a lower SR of 366% observed at pH 1.2. These differences were attributable to the electrostatic repulsion of -COO^-. Two protein-based model drugs were compared to estimate their drug-release properties. Bovine serum albumin (BSA) was adsorbed on lignin from MBEH through hydrophobic interactions, resulting in poor drug release. Lysozyme (LYZ) exhibited a higher drug release rate (92.79%) over 60 h at pH 7.4 due to the static attraction between LYZ and -COO^- of SA-bamboo-BC-0.75. As such, SA-bamboo-BC nanocomposite hydrogel was shown to possess sufficient swelling, drug-release and biocompatibility for substrate use.

Comparison of drug release behavior of bacterial cellulose loaded with ibuprofen and propranolol hydrochloride

The aim of this study was to investigate the drug release behavior from bacterial cellulose (BC). Ibuprofen and propranolol hydrochloride were used as model drugs to represent low and highly water soluble drugs. The drug was loaded into the BC by immersing the partially swollen BC in a solution of drug concentrations ranging from 0.05 to 0.5 mg mL⁻¹ and then drying by two different methods: air-drying and freeze-drying. The results showed that the type of drug and the drying method influenced the drug loading efficiency and drug release behavior. For ibuprofen, high drug loading efficiency was found when loading the drug into BC at low concentration and vice versa for propranolol hydrochloride. The drug-loaded BC prepared by the freeze-drying method showed a sustained release regardless of drug type and drug-loaded amount. The sustained release followed the Higuchi and Korsmeyer–Peppas models. On the other hand, when using the air-drying method, BC loaded with ibuprofen showed immediate release at every drug-loaded amount. However, BC loaded with propranolol hydrochloride showed immediate release at the high drug-loaded amount but showed sustained release at the low drug-loaded amount. The release of drug from a drug-loaded BC prepared by air-drying method tended to follow first-order kinetics. In conclusion, the drug loading concentration and the drying method in the drug-loaded BC preparation influenced the drug release characteristics of the BC-based drug delivery system.

The aim of this study was to investigate the drug release behavior from bacterial cellulose (BC).

Industrial-Scale Production and Applications of Bacterial Cellulose

Bacterial cellulose (BC) is a natural biomaterial synthesized by bacteria. It possesses a unique structure of cellulose nanofiber-weaved three-dimensional reticulated network that endows it excellent mechanical properties, high water holding capability and outstanding suspension stability. It is also characterized with high purity, high degree of crystallinity, great biocompatibility and biodegradability. Due to these advantages, BC has gained great attentions in both academic and industrial areas. This critical review summarizes the up-to-date development of BC production and application from an industrial perspective. Firstly, a fundamental knowledge of BC's biosynthesis, structure and properties is described, and then recent developments in the industrial fermentation of BC are introduced. Subsequently, the latest commercial applications of BC in the areas of food, personal care, household chemicals, biomedicine, textile, composite resin are summarized. Finally, a brief discussion of future development of BC industry is presented at the end.

Lignocellulosic Biomass for the Synthesis of Nanocellulose and Its Eco-Friendly Advanced Applications

Nanocellulose is a unique and natural compound extracted from native cellulose using different extraction techniques. Nanocellulose is currently attracting attention due to its excellent properties such as special surface chemistry, exceptional physical and chemical strength, and rich hydroxyl groups for modification. In addition, its significant biological properties, like biodegradability, biocompatibility, and non-toxicity, accompanied by being environmentally friendly, are added advantages. The current review is focused on the lignocellulosic biomass processing methods for nanocellulose production and their usage for eco-friendly and environmental sustainability. We have also described insights into different techniques by which cellulosic materials can be changed into cellulose nanofibers (CNFs) and cellulose nanocrystals (CNCs). Lastly, we further discussed how nano-cellulosic materials are being used in a variety of industries such as the food sector, biomedical hygiene products, health care, water purification, and sensors. In the review, the unique uses of nanocelluloses in the production of nanocomposite materials, like flexible supercapacitor and polymer matrix, toward minimizing the utilization of global fossil energy and environmental pollution are envisaged. Finally, the significant application of nanomaterials in the areas of packaging industries, health and hygienic sector, cosmetics, and other important sectors are discussed. In the aspect of techno-economically feasibility, nano-cellulose-based materials may prove to be outstanding, environment friendly, and mitigate effluent load.