Determination of metal-based hydroxyl radical generating capacity of ambient and diesel exhaust particles

Iron-doped diesel exhaust early-in-life inhalation-induced cardiopulmonary toxicity in chicken embryo: Roles of ferroptosis and acyl hydrocarbon signaling

Diesel exhaust (DE) is a major contributor to air pollution. Iron-doping could improve diesel burning efficacy and decrease emission, however, it will also change the composition of DE, potentially enhancing the toxicities. This study is aimed to assess iron-doped DE-induced cardiopulmonary toxicity in an established in ovo early-in-life inhalation exposure chicken embryo model, and to explore potential mechanisms. Ferrocene (205, 410, 820,1640 mg/L, equivalent to 75, 150, 300, 600 ppm iron mass) was added to diesel fuel, DE was collected from a diesel generator, and then exposed to embryonic day 18-19 chicken embryo via in ovo inhalation. Hatched chickens were kept for 0, 1, or 3 months, and then sacrificed. Histopathology, electrocardiography along with biochemical methods were used to assess cardiopulmonary toxicities. For mechanistic investigation, inhibitor for ferroptosis (ferrostatin-1) or Acyl hydrocarbon receptor (PDM2) were administered before DE (with or without iron-doping), and the cardiopulmonary toxicities were compared. Characterization of DE particles indicated that addition of ferrocene significantly elevated iron content. Additionally, the contents of major toxic polycyclic aromatic hydrocarbons decreased following addition of 820 mg/L ferrocene, but increased at other doses. Remarkable cardiopulmonary toxicities, in the manifestation of elevated heart rates, cardiac remodeling and cardiac/pulmonary fibrosis were observed in animals exposed to iron-doped DEs, in which the addition of ferrocene significantly enhanced the toxicities. Both ferrostatin-1 and PDM2 pretreatment could effectively alleviate the observed effects in animals exposed to iron-doped DE. Inhibition of AhR signaling seems to be capable of alleviating changes to ferroptosis related molecules following exposure to iron-doped DE, while inhibition of ferroptosis does not seem to affect AhR signaling molecules. In summary, iron-doping with ferrocene to diesel enhanced DE-induced cardiopulmonary toxicities in chicken embryos. Ferroptosis and AhR signaling both seem to participate in this process, in which AhR signaling seems to affect ferroptosis.

Particulate Matter and Its Molecular Effects on Skin: Implications for Various Skin Diseases

Particulate matter (PM) is a harmful air pollutant composed of chemicals and metals which affects human health by penetrating both the respiratory system and skin, causing oxidative stress and inflammation. This review investigates the association between PM and skin disease, focusing on the underlying molecular mechanisms and specific disease pathways involved. Studies have shown that PM exposure is positively associated with skin diseases such as atopic dermatitis, psoriasis, acne, and skin aging. PM-induced oxidative stress damages lipids, proteins, and DNA, impairing cellular functions and triggering inflammatory responses through pathways like aryl hydrocarbon receptor (AhR), NF-κB, and MAPK. This leads to increased production of inflammatory cytokines and exacerbates skin conditions. PM exposure exacerbates AD by triggering inflammation and barrier disruption. It disrupts keratinocyte differentiation and increases pro-inflammatory cytokines in psoriasis. In acne, it increases sebum production and inflammatory biomarkers. It accelerates skin aging by degrading ECM proteins and increasing MMP-1 and COX2. In conclusion, PM compromises skin health by penetrating skin barriers, inducing oxidative stress and inflammation through mechanisms like ROS generation and activation of key pathways, leading to cellular damage, apoptosis, and autophagy. This highlights the need for protective measures and targeted treatments to mitigate PM-induced skin damage.

Sources of acellular oxidative potential of water-soluble fine ambient particulate matter in the midwestern United States

Ambient fine particulate matter (PM2.5) is associated with numerous health complications, yet the specific PM2.5 chemical components and their emission sources contributing to these health outcomes are understudied. Our study analyzes the chemical composition of PM2.5 collected from five distinct locations at urban, roadside and rural environments in midwestern region of the United States, and associates them with five acellular oxidative potential (OP) endpoints of water-soluble PM2.5. Redox-active metals (i.e., Cu, Fe, and Mn) and carbonaceous species were correlated with most OP endpoints, suggesting their significant role in OP. We conducted a source apportionment analysis using positive matrix factorization (PMF) and found a strong disparity in the contribution of various emission sources to PM2.5 mass vs. OP. Regional secondary sources and combustion-related aerosols contributed significantly (> 75 % in total) to PM2.5 mass, but showed weaker contribution (43-69 %) to OP. Local sources such as parking emissions, industrial emissions, and agricultural activities, though accounting marginally to PM2.5 mass (< 10 % for each), significantly contributed to various OP endpoints (10-50 %). Our results demonstrate that the sources contributing to PM2.5 mass and health effects are not necessarily same, emphasizing the need for an improved air quality management strategy utilizing more health-relevant PM2.5 indicators.

Effects of chemical composition of ambient PM2.5 measured in Seoul on potential health risks and generation of reactive oxygen species

This study assesses the health effects associated with the chemical species of ambient particulate matter (PM) with an aerodynamic diameter ≤2.5 μm (PM2.5) in Seoul, focusing on identifying key chemical constituents and their sources. We employed two approaches to estimate health risks: (1) evaluating carcinogenic and noncarcinogenic risks using IRIS (Integrated Risk Information System) data from the US EPA (Environmental Protection Agency), and (2) quantifying the generation of hydroxyl radicals (·OH) following exposure to PM2.5 in surrogate lung fluid (SLF). Our results show a significant impact on human health from certain elements (Cr, Ni, As, and Cd) and polycyclic aromatic hydrocarbons (PAHs) (DaeP, DahA, and BaP for carcinogenic risks; BaP and BeP for noncarcinogenic risks). Notably, Cr and BaP, which are influential in both risk assessment and ·OH generation, highlight their significant roles in human health impacts. However, other components (e.g., CPP, BaP, BghiP, BaA, CHR, PYR, FLT, Ca, Mg, and Cu), though contributors to ·OH generation, were not included in the EPA's health risk assessment, suggesting a need for a broader PM2.5 compositional analysis to more accurately determine exposure concentrations and assess inhalation risks. These components predominantly originate from anthropogenic sources, such as combustion, vehicles, and industrial activities, underscoring the significant health implications of the pollutants emitted from these sources. The study concluded that focusing solely on the mass reduction of PM2.5 may not suffice; a dual approach that reduces both mass concentration and chemical-specific health risks is imperative for effective public health protection.

Inhalation of particulate matter containing environmentally persistent free radicals induces endothelial dysfunction mediated via AhR activation at the air-blood interface

Particulate matter (PM) containing environmentally persistent free radicals (EPFR) is formed by the incomplete combustion of organic wastes, resulting in the chemisorption of pollutants to the surface of PM containing redox-active transition metals. In prior studies in mice, EPFR inhalation impaired endothelium-dependent vasodilation. These findings were associated with aryl hydrocarbon receptor (AhR) activation in the alveolar type-II (AT-II) cells that form the air-blood interface in the lung. We thus hypothesized that AhR activation in AT-II cells promotes the systemic release of mediators that promote endothelium dysfunction peripheral to the lung. To test our hypothesis, we knocked down AhR in AT-II cells of male and female mice and exposed them to 280 µg/m3 EPFR lo (2.7e + 16 radicals/g) or EPFR (5.5e + 17 radicals/g) compared with filtered air for 4 h/day for 1 day or 5 days. AT-II-AhR activation-induced EPFR-mediated endothelial dysfunction, reducing endothelium-dependent vasorelaxation by 59%, and eNOS expression by 50%. It also increased endothelin-1 mRNA levels in the lungs and peptide levels in the plasma in a paracrine fashion, along with soluble vascular cell adhesion molecule-1 and iNOS mRNA expression, possibly via NF-kB activation. Finally, AhR-dependent increases in antioxidant response signaling, coupled to increased levels of 3-nitrotyrosine in the lungs of EPFR-exposed littermate control but not AT-II AhR KO mice suggested that ATII-specific AhR activation promotes oxidative and nitrative stress. Thus, AhR activation at the air-blood interface mediates endothelial dysfunction observed peripheral to the lung, potentially via release of systemic mediators.

Summertime oxidative potential of atmospheric PM2.5 over New Delhi: Effect of aerosol ageing

Exposure to elevated particulate matter (PM) concentrations in ambient air has become a major health concern over urban areas worldwide. Reactive oxygen species (ROS) generation due to ambient PM (termed as their oxidative potential, OP) is shown to play a major role in PM-induced health effects. In the present study, the OP of the ambient PM2.5 samples, collected during summer 2019 from New Delhi, were measured using the dithiothreitol (DTT) assay. Average volume-normalized OP (OPV) was 2.9 ± 1.1 nmol DTT min-1 m-3, and mass-normalized OP (OPm) was 61 ± 29 pmol DTT min-1 μg-1. The regression statistics of OPv vs chemical species show the maximum slope of OPV with the elemental carbon (EC, r2 = 0.72) followed by water-soluble organic carbon (WSOC, r2 = 0.72), and organic carbon (OC, r2 = 0.64). A strong positive correlation between OPm and secondary inorganic aerosols (SIA, such as NH4+ and NO3- mass fractions) was also observed, indicating that the sources emitting NO2 and NH3, precursors of NO3- and NH4+, also emit DTT-active species. Interestingly, the slope value of OPv vs OC for aged aerosols (OM/OC > 1.7, f44 > 0.12 and f43 < 0.04) was 1.7 times higher than relatively fresh organic aerosols (OA, OM/OC < 1.7, f44 < 0.12, f43 > 0.04). An increase in OPv and OPoc with f44 indicates the formation of more DTT active species with the ageing of OA. A linear increase in OPoc with increasing Nitrogen/Carbon (N/C) ratio suggests that nitrogenous OA have higher OP.

Chemical and oxidative properties of fine particulate matter from near-road traffic sources

The toxicity associated with the fine particulate matter (PM2.5) has not been well studied, particularly in relation to the emissions from on-road vehicles and other sources in low- and middle-income countries such as India. Thus, a study was conducted to examine the oxidative potential (OP) of PM2.5 at a roadside (RS) site with heavy vehicular traffic and an urban background (BG) site in Mumbai using the dithiothreitol (DTT) assay. Simultaneous gravimetric PM2.5 was measured at both sites and characterized for carbonaceous constituents and water-soluble trace elements and metals. Results depicted higher PM2.5, elemental carbon (EC), and organic carbon (OC) concentrations on the RS than BG (by a factor of 1.7, 4.6, and 1.2, respectively), while BG had higher water-soluble organic carbon (WSOC) levels (by a factor of 1.4) and a higher WSOC to OC ratio (86%), likely due to the dominance of secondary aerosol formation. In contrast, the measured OPDTTv at RS (8.9 ± 5.5 nmol/min/m3) and BG (8.1 ± 6.4 nmol/min/m3) sites were similar. However, OPDTTv at BG was higher during the afternoon, suggesting the influence of photochemical transformation on measured OPDTTv at BG. At RS, OC and redox-active metals (Cu, Zn, Mn, and Fe) were significantly associated with measured OP (p < 0.05), while at BG, WSOC was most strongly associated (p < 0.05). The coefficient of divergence (COD) for PM2.5, its chemical species, and OPDTTv was >0.2, indicating spatial heterogeneity between the sites, and differences in emission sources and toxicity. The estimated hazard index (HI) was not associated with OPDTTv, indicating that current PM2.5 mass regulations may not adequately capture the health effects of PM2.5. The study highlights the need for further studies examining PM2.5 toxicity and developing toxicity-based air quality regulations.

Environmentally persistent free radicals: Methods for combustion generation, whole-body inhalation and assessing cardiopulmonary consequences

Particulate matter (PM) containing environmentally persistent free radicals (EPFRs) results from the incomplete combustion of organic wastes which chemisorb to transition metals. This process generates a particle-pollutant complex that continuously redox cycles to produce reactive oxygen species. EPFRs are well characterized, but their cardiopulmonary effects remain unknown. This publication provides a detailed approach to evaluating these effects and demonstrates the impact that EPFRs have on the lungs and vasculature. Combustion-derived EPFRs were generated (EPFR lo: 2.1e-16 radical/g, EPFR hi: 5.5e-17 radical/g), characterized, and verified as representative of those found in urban areas. Dry particle aerosolization and whole-body inhalation were established for rodent exposures. To verify that these particles and exposures recapitulate findings relevant to known PM-induced cardiopulmonary effects, male C57BL6 mice were exposed to filtered air, ∼280 μg/m3 EPFR lo or EPFR hi for 4 h/d for 5 consecutive days. Compared to filtered air, pulmonary resistance was increased in mice exposed to EPFR hi. Mice exposed to EPFR hi also exhibited increased plasma endothelin-1 (44.6 vs 30.6 pg/mL) and reduced nitric oxide (137 nM vs 236 nM), suggesting vascular dysfunction. Assessment of vascular response demonstrated an impairment in endothelium-dependent vasorelaxation, with maximum relaxation decreased from 80% to 62% in filtered air vs EPFR hi exposed mice. Gene expression analysis highlighted fold changes in aryl hydrocarbon receptor (AhR) and antioxidant response genes including increases in lung Cyp1a1 (8.7 fold), Cyp1b1 (9 fold), Aldh3a1 (1.7 fold) and Nqo1 (2.4 fold) and Gclc (1.3 fold), and in aortic Cyp1a1 (5.3 fold) in mice exposed to EPFR hi vs filtered air. We then determined that lung AT2 cells were the predominate locus for AhR activation. Together, these data suggest the lung and vasculature as particular targets for the health impacts of EPFRs and demonstrate the importance of additional studies investigating the cardiopulmonary effects of EPFRs.

Pollution levels and health risk assessment of potentially toxic metals of size-segregated particulate matter in rural residential areas of high lung cancer incidence in Fuyuan, China

The highest incidence and mortality rate of lung cancer in rural area of Fuyuan has been a research hotspot, and the pathogenesis is still unclear. Therefore, atmospheric particulate matters (APMs) samples were collected between 18 February and 01 March 2017, exploring water-soluble potentially toxic metals (WSPTMs) and water-soluble inorganic ionic species (WSIIs) levels, size distribution, sources, acidity and alkalinity, and potential carcinogenic and non-carcinogenic risks, hoping to provide scientific basic data to solve this problem. In our study, the average ratio of nitrate ion (NO₃^-)/sulfate ion (SO₄^2-) within PM_1.1, PM_1.1-2.0, PM_2.0-3.3, PM_3.3-7.0, and PM_>7.0 were 0.22, 0.18, 0.15, 0.34 and 0.36, respectively, that revealed that combustion sources contributed to PM were more significant. The anions in equilibrium (ANE) / cations in equilibrium (CAE) < 1 for all samples within PM_1.1, PM_2.0-3.3, PM_3.3-7.0 indicate that the APMs were alkaline, but PM_1.1-2.0 particulate matter shows weak acidity. SO₄^2- prefers to combine with NH₄⁺ to form (NH₄)₂SO₄, which hinders the formation of NH₄NO₃, the remaining SO₄^2- and NO₃^- to neutralize the K⁺, KNO₃ was formed at all particulate, however, K₂SO₄ can only be formed in PM_<3.3. Arsenic (As) and Selenium (Se) were identified as the most enriched WSPTMs in all PM sizes, predominantly from anthropogenic emissions, were suggested that coal combustion is a significant source of PM-bound WSPTMs. Total WSPTMs exhibited high total carcinogenic risks (TCR) values (9.98 × 10^-6, 1.06 × 10^-5, and 1.19 × 10^-5 for girls, boys and adults, respectively) in the smaller particles (< 1.1 μm). Se was considered as the major contributor (63.60%) to carcinogenic risk (CR) in PM_2.0 and had an inverse relationship with PM size that should be of prime concern.

Microfluidic paper-based analytical devices for simultaneous detection of oxidative potential and copper in aerosol samples

The potential reach of point-of-care (POC) diagnostics into daily routines for exposure to reactive oxygen species (ROS) and Cu in aerosolized particulate matter (PM) demands that microfluidic paper-based analytical devices (μPADs) take into consideration the simple detection of these toxic PM components. Here, we propose μPADs with a dual-detection system for simultaneous ROS and Cu(II) detection. For colorimetric ROS detection, the glutathione (GSH) assay with a folding design to delay the reaction yielded complete ROS and GSH oxidation, and improved homogeneity of color development relative to using the lateral flow pattern. For electrochemical Cu(II) determination, 1,10-phenanthroline/Nafion modified graphene screen-printed electrodes showed ability to detect Cu(II) down to pg level being low enough to be applied to PM analysis. No intra- and inter-interference affecting both systems were found. The proposed μPADs obtained LODs for 1,4-naphthoquinone (1,4-NQ), used as the ROS representative, and Cu(II) of 8.3 ng and 3.6 pg, respectively and linear working ranges of 20 to 500 ng for ROS and 1 × 10^-2 to 2 × 10² ng for Cu(II). Recovery of the method was between 81.4 and 108.3% for ROS and 80.5-105.3% for Cu(II). Finally, the sensors were utilized for simultaneous ROS and Cu(II) determination in PM samples and the results statistically agreed with those using the conventional methods at 95% confidence.

Insights into reactive oxygen species formation induced by water-soluble organic compounds and transition metals using spectroscopic method

Ambient particulate matter (PM) can cause adverse health effects via their ability to produce Reactive Oxygen Species (ROS). Water-Soluble Organic Compounds (WSOCs), a complex mixture of organic compounds which usually coexist with Transition Metals (TMs) in PM, have been found to contribute to ROS formation. However, the interaction between WSOCs and TMs and its effect on ROS generation are still unknown. In this study, we examined the ROS concentrations of V, Zn, Suwannee River Fulvic Acid (SRFA), Suwannee River Humic Acid (SRHA) and the mixtures of V/Zn and SRFA/SRHA by using a cell-free 2',7'-Dichlorodihydrofluorescein (DCFH) assay. The results showed that V or Zn synergistically promoted ROS generated by SRFA, but had an antagonistic effect on ROS generated by SRHA. Fluorescence quenching experiments indicated that V and Zn were more prone to form stable complexes with aromatic humic acid-like component (C1) and fulvic acid-like component (C3) in SRFA and SRHA. Results suggested that the underlying mechanism involving the fulvic acid-like component in SRFA more tending to complex with TMs to facilitate ROS generation through π electron transfer. Our work showed that the complexing ability and complexing stability of atmospheric PM organics with metals could significantly affect ROS generation. It is recommended that the research deploying multiple analytical methods to quantify the impact of PM components on public health and environment is needed in the future.

Impact of air pollution on ischemic heart disease: Evidence, mechanisms, clinical perspectives

Ambient air pollution, and especially particulate matter (PM) air pollution <2.5 μm in diameter (PM_2.5), has clearly emerged as an important yet often overlooked risk factor for atherosclerosis and ischemic heart disease (IHD). In this review, we examine the available evidence demonstrating how acute and chronic PM_2.5 exposure clinically translates into a heightened coronary atherosclerotic burden and an increased risk of acute ischemic coronary events. Moreover, we provide insights into the pathophysiologic mechanisms underlying PM_2.5-mediated atherosclerosis, focusing on the specific biological mechanism through which PM_2.5 exerts its detrimental effects. Further, we discuss about the possible mechanisms that explain the recent findings reporting a strong association between severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection, increased PM_2.5 exposure, and morbidity and mortality from IHD. We also address the possible mitigation strategies that should be implemented to reduce the impact of PM_2.5 on cardiovascular morbidity and mortality, and underscoring the strong need of clinical trials demonstrating the efficacy of specific interventions (including both PM_2.5 reduction and/or specific drugs) in reducing the incidence of IHD. Finally, we introduce the emerging concept of the exposome, highlighting the close relationship between PM_2.5 and other environmental exposures (i.e.: traffic noise and climate change) in terms of common underlying pathophysiologic mechanisms and possible mitigation strategies.

Physicochemical characterization and oxidative potential of size fractionated Particulate Matter: Uptake, genotoxicity and mutagenicity in V-79 cells

For many years, the impact of Particulate Matter (PM) in the ambient air has been one of the major concerns for the environment and human health. The consideration of the heterogeneity and complexity of different size fractions is notably important for the assessment of PM toxicological effects. The aim of the study was to present a comprehensive size-composition-morphology characterization and to assess the oxidative potential, genotoxicity, and mutagenicity of the atmospheric PM fractions, collected by using MOUDI near a busy roadside in Lucknow, India. Physicochemical characterization of ambient coarse particles (1.8-10 µm), fine particles (0.32-1.8 µm), quasi-ultrafine (0.1-0.32 µm) and ultrafine particles (≤0.1 µm) along with SRM 1649b was done using TEM, SEM, DLS, NTA, ICP-MS, and IC in parallel with the estimation of exogenous Reactive Oxygen Species (ROS) by acellular assays. In this study, two different acellular assays, dithiothreitol (DTT) and the CM-H₂DCFDA assay, indicated stronger mass-normalized bioactivity for different size ranges. Enrichment factor analysis indicated that the different size fractions were highly enriched with elements of anthropogenic origin as compared to elements of crustal origin. The endotoxin concentration in different size fractions was also estimated. Cellular studies demonstrated significant uptake, cytotoxicity, ultrastructural changes, cellular ROS generation, and changes in the different phases of the cell cycle (Sub G1, G1, S, G2/M) exposed to different size fractions. The Comet assay and the Micronucleus assay were used to estimate genotoxicity. Mutagenic potential was revealed by the HGPRT gene forward mutation assay in V-97 cells. Conclusively, our results clearly indicate that the genotoxic and mutagenic potential of the coarse PM was greater than the other fractions, and interestingly, the ultrafine PM has higher bioactivity as compared to quasi-ultrafine PM.

Precipitation of aqueous transition metals in particulate matter during the dithiothreitol (DTT) oxidative potential assay

Transition metals in particulate matter (PM) are hypothesized to have enhanced toxicity based on their oxidative potential (OP). The acellular dithiothreitol (DTT) assay is widely used to measure the OP of PM and its chemical components. In our prior study, we showed that the DTT assay (pH 7.4, 0.1 M phosphate buffer, 37 °C) provides favorable thermodynamic conditions for precipitation of multiple metals present in PM. This study utilizes multiple techniques to characterize the precipitation of aqueous metals present at low concentrations in the DTT assay. Metal precipitation was identified using laser particle light scattering analysis, direct chemical measurement of aqueous metal removal, and microscopic imaging. Experiments were run with aqueous metals from individual metal salts and a well-characterized urban PM standard (NIST SRM-1648a, Urban Particulate Matter). Our results demonstrated rapid precipitation of metals in the DTT assay. Metal precipitation was independent of DTT but dependent on metal concentration. Metal removal in the chemically complex urban PM samples exceeded the thermodynamic predictions and removal seen in single metal salt experiments, suggesting co-precipitation and/or adsorption may have occurred. These results have broad implications for other acellular assays that study PM metals using phosphate buffer, and subsequently, the PM toxicity inferred from these assays.

Approval Research for Carcinogen Humic-Like Substances (HULIS) Emitted from Residential Coal Combustion in High Lung Cancer Incidence Areas of China

The incidence and mortality rate of lung cancer is the highest in Xuanwei County, Yunnan Province, China. The mechanisms of the high lung incidence remain unclear, necessitating further study. However, the particle size distribution characteristics of HULIS emitted from residential coal combustion (RCC) have not been studied in Xuanwei. In this study, six kinds of residential coal were collected. Size-resolved particles emitted from the coal were sampled by using a burning system, which was simulated according to RCC made in our laboratory. Organic carbon (OC), elemental carbon (EC), water-soluble inorganic ion, water-soluble potentially toxic metals (WSPTMs), water-soluble organic carbon (WSOC), and HULIS-C (referred to as HULIS containing carbon contents) in the different size-segregated particulate matter (PM) samples were determined for health risk assessments by inhalation of PM. In our study, the ratio of HULIS-Cx to WSOCx values in RCC particles were 32.73–63.76% (average 53.85 ± 12.12%) for PM2.0 and 33.91–82.67% (average 57.06 ± 17.32%) for PM2.0~7.0, respectively. The carcinogenic risks of WSPTMs for both children and adults exceeded the acceptable level (1 × 10−6, indicating that we should pay more attention to these WSPTMs). Exploring the HULIS content and particle size distribution of the particulate matter produced by household coal combustion provides a new perspective and evidence for revealing the high incidence of lung cancer in Xuanwei, China.

Assessment of oxidative potential by hydrophilic and hydrophobic fractions of water-soluble PM2.5 and their mixture effects

Transition metals (TMs) (e.g. copper (Cu) and iron (Fe)) and certain organic compounds are known active constituents causing oxidative potential (OP) by inhaled ambient fine particulate matter (PM_2.5) in lung fluid. Humic-like substances (HULIS), isolated from atmospheric PM_2.5, are largely metal-free and contain mixtures of organics that are capable of complexing TMs. TMs and HULIS co-exist in the water-extractable part of PM_2.5. In this work, we used a solid phase extraction procedure to isolate the water-soluble TMs in the hydrophilic fraction (HPI) and HULIS in the hydrophobic fraction (HPO) and carried out this isolation procedure to a set of 32 real-world PM_2.5 samples collected in Beijing and Hong Kong, China. We quantified two OP endpoints, namely hydroxyl radical formation (denoted as OP_•OH) and ascorbic acid depletion (denoted as OP_AA), by the two fractions separately and combined, as well as by the bulk water-soluble aerosols. OP_•OH and OP_AA were well-correlated in both separate fractions and their combined mixtures or bulk water-soluble aerosols. OP by HPI far exceeded that by HPO. On a per unit PM_2.5 mass basis, the Hong Kong samples on average had a higher OP_AA and OP_•OH than the Beijing samples due to more water-soluble Cu. For HPI, Cu was a dominant OP_•OH and OP_AA contributor (>80%), although water-soluble Fe was present at a concentration approximately one order of magnitude higher. Suppression effects on OP_•OH were observed through comparing the OP of the bulk water-soluble aerosol with that of HPI. Our work reveals the importance of monitoring PM_2.5 chemical compositions (especially water-soluble redox active metals). Furthermore, we demonstrate the need to consider metal-organic interactions when evaluating the aggregate OP by PM_2.5 from individual components or apportioning OP by PM_2.5 to specific chemical components.

Source-specific health risk assessment of PM2.5-bound heavy metals based on high time-resolved measurement in a Chinese megacity: insights into seasonal and diurnal variations

The health effects of PM2.5 associated heavy metals have caused wide public concern. To more accurately assess source-specific health risks of PM2.5-bound heavy metals, and to formulate a cost-effective control strategy to health risk reduction, it is necessary to have a better understanding of the temporal variation of source-specific health risks. For this purpose, hourly PM2.5 and associated heavy metals were measured during four seasons in 2018-2019 in a Chinese megacity. A method integrating positive matrix factorization (PMF) with the health risk assessment model was used to quantify the source-specific health risks. Results showed that the total hazard index (HI) of PM2.5-bound heavy metals was 1.35, higher than the safety level, the sum cancer risks (R) of carcinogenic elements (Cr, Co, Ni and As) were 2.8 × 10-5, implying nonnegligible risks. Industrial source 1 (61.3%), which was related with Mn posed the largest non-cancer risk, while coal combustion (36.1%) and industrial source 1 (34.9%) posed most of the cancer risk, and slightly fluctuated with seasons. Health risks of most resolved sources were higher in autumn and winter than in other seasons. In terms of the diurnal variation, they were the lowest in the afternoon. Besides, the health risks of vehicle source had a peak value in rush hours. Different scenarios were simulated to understand the influences of time resolutions and sampling periods on source-specific risk assessment. The results showed the cancer risks of coal combustion and industrial source 1 calculated from the dataset with reduced sampling periods were different from those calculated from the whole dataset. We conclude that source-specific health risks of heavy metals show seasonal and diurnal variations, which suggests that targeted strategies should be adopted on the basis of seasonal and diurnal cycles to protect public health. In addition, a sufficient sampling period is required to generate representative and reliable results for source-specific health risk assessment.

Study on the Characteristics of Size-Segregated Particulate Water-Soluble Inorganic Ions and Potentially Toxic Metals during Wintertime in a High Population Residential Area in Beijing, China

Airborne particulate matter (PM) pollution often occurs in the wintertime in northern China, posing a potential threat to human health. To date, there are limited studies about the metals and inorganic ions to link source apportionments and health risk assessments in the different size-segregated PM samples. In this study, our samples were collected by a high-volume air sampler from 26 December 2018 to 11 January 2019 in a high population residential area (Beijing). Water-soluble inorganic ions, metal elements in the different size-segregated PM samples were determined for health risk assessments by inhalation of PM. During the sampling period in Beijing, the average concentrations of PM1.1 and PM1.1–2.0 were 39.67 ± 10.66 μg m−3 and 32.25 ± 6.78 μg m−3. Distinct distribution profiles characterized the different elements. The markers of coal combustion Pb, As, and Se had >52% of their mass concentration in PM1.1. The average mass ratios of (NO3− + NO2−)/SO42−, Cl−/Na+, Cl−/K+, and Cl−/(NO3− + NO2−) were 1.68, 6.58, 6.18, and 0.57, which showed that coal combustion and vehicle emissions were the main anthropogenic sources of PM in Beijing in winter. PM1.1 was the major contributor of Pb, Cd, and As for carcinogenic risks (CR) and hazard quotient (HQ). It was indicated that PM1.1 is more harmful than coarse PM. The toxic elements of Cr (VI) (1.12 × 10−6), V (0.69 × 10−6), and As (0.41 × 10−6) caused higher CR for children than Ni, Cd, Co, and Pb. Meanwhile, Pb (35.30 × 10−6) and Ni (21.07 × 10−6) caused higher CR for adults than As, Cr (VI), V, Co, and Cd, especially PM1.1. This study provides detailed composition data and the first report on human health in a high population residential area in Beijing.

Fate of transition metals in PO4-based in vitro assays: equilibrium modeling and macroscopic studies

Transition metals are thought to be among the most toxic components in atmospheric particulate matter (PM) due to their role in catalyzing reactive oxygen species (ROS) formation. We show that precipitation of the transition metals Fe(ii), Fe(iii), and Mn(ii) are thermodynamically favored in phosphate-based assays used to measure the oxidative potential (OP) - a surrogate for toxicity - of PM. Fe and Mn precipitation is likely to occur at extremely low metal concentrations (<0.5 μM), levels that are imperceptible to the naked eye. The concentration of each metal (other than Cu) in aqueous PM filter extracts often exceeds the solubility limit in OP assays, indicating favorable thermodynamic conditions for precipitation. Macroscopic experimental results at higher metal concentrations (>100 μM) with visible precipitates provide quasi-validation of the thermodynamic modeling. Oxidation of Fe(ii) to Fe(iii) is likely to be rapid in all in vitro OP assays, transforming Fe to a much less soluble form. Fe precipitates are likely to increase the rate of precipitation of other metals and possibly induce co-precipitation. These results have direct relevance for all PO4-based assays; the implications for studies of PM toxicity are discussed.

Size distributions of particle-generated hydroxyl radical (·OH) in surrogate lung fluid (SLF) solution and their potential sources

Although it is known that increases in ambient particulate matter (PM) levels are associated with elevated occurrence of adverse health outcomes, the understanding of the mechanisms of PM-related health effects is limited by our knowledge of how particle size and composition are altered subsequent to inhalation through respiratory-deposited processing. Here we present a particle-generated hydroxyl radical (·OH) study of the size-resolved particles as particles are inhaled in the human respiratory tract (RT), and we show that accumulation-mode particles are significant factors (71-75%) in ·OH generation of lung-deposited particles using Multiple-Path Particle Dosimetry (MPPD) model. The ability of PM to catalyze ·OH generation is mainly related to transition metals, particularly towards the upper regions of the RT (75%), and to quinones deeper in the lung (42-46%). Identification of this generation ability induced by chemical composition has shown that four potential sources (biomass burning, incomplete combustion, mobile & industry, and mineral dust) are responsible for ·OH generation. With ·OH-forming ability after PM inhalation implicated as the first step towards revealing the subsequent toxic processes, this work draws a connection between the detailed ·OH chemistry occurring on size-resolved particles and a possible toxicological mechanism based on chemical composition and sources.

Phosphate Buffer Solubility and Oxidative Potential of Single Metals or Multielement Particles of Welding Fumes

To evaluate the chemical behavior and the health impact of welding fumes (WF), a complex and heterogeneous mixture of particulate metal oxides, two certified reference materials (CRMs) were tested: mild steel WF (MSWF-1) and stainless steel WF (SSWF-1). We determined their total chemical composition, their solubility, and their oxidative potential in a phosphate buffer (PB) solution under physiological conditions (pH 7.4 and 37 °C). The oxidative potential (OPDTT) of WF CRMs was evaluated using an acellular method by following the dithiothreitol (DTT) consumption rate (µmol DTT L−1 min−1). Pure metal salts present in the PB soluble fraction of the WF CRMs were tested individually at equivalent molarity to estimate their specific contribution to the total OPDTT. The metal composition of MSWF-1 consisted mainly of Fe, Zn, Mn, and Cu and the SSWF-1 composition consisted mainly of Fe, Mn, Cr, Ni, Cu, and Zn, in diminishing order. The metal PB solubility decreased from Cu (11%) to Fe (approximately 0.2%) for MSWF-1 and from Mn (9%) to Fe (<1%) for SSWF-1. The total OPDTT of SSWF-1 is 2.2 times the OPDTT of MSWF-1 due to the difference in oxidative capacity of soluble transition metals. Cu (II) and Mn (II) are the most sensitive towards DTT while Cr (VI), Fe (III), and Zn (II) are barely reactive, even at higher concentrations. The OPDTT measured for both WF CRMs extracts compare well with simulated extracts containing the main metals at their respective PB-soluble concentrations. The most soluble transition metals in the simulated extract, Mn (II) and Cu (II), were the main contributors to OPDTT in WF CRMs extracts. Mn (II), Cu (II), and Ni (II) might enhance the DTT oxidation by a redox catalytic reaction. However, summing the main individual soluble metal DTT response induces a large overestimation probably linked to modifications in the speciation of various metals when mixed. The complexation of metals with different ligands present in solution and the interaction between metals in the PB-soluble fraction are important phenomena that can influence OPDTT depletion and therefore the potential health effect of inhaled WF.

Air pollution and cardiovascular disease: car sick

The cardiovascular effects of inhaled particle matter (PM) are responsible for a substantial morbidity and mortality attributed to air pollution. Ultrafine particles, like those in diesel exhaust emissions, are a major source of nanoparticles in urban environments, and it is these particles that have the capacity to induce the most significant health effects. Research has shown that diesel exhaust exposure can have many detrimental effects on the cardiovascular system both acutely and chronically. This review provides an overview of the cardiovascular effects on PM in air pollution, with an emphasis on ultrafine particles in vehicle exhaust. We consider the biological mechanisms underlying these cardiovascular effects of PM and postulate that cardiovascular dysfunction may be implicated in the effects of PM in other organ systems. The employment of multiple strategies to tackle air pollution, and especially ultrafine particles from vehicles, is likely to be accompanied by improvements in cardiovascular health.

Specific sources of health risks caused by size-resolved PM-bound metals in a typical coal-burning city of northern China during the winter haze event

High particulate matter (PM) pollution frequently occurs in winter over northern China , resulting in threats to human health. To date, there are limited studies to link source apportionments and health risk assessments in the different size-resolved PM samples during high PM events. In this study, size-segregated PM samples were collected in Linfen, a typical coal-burning city, in northern China during a wintertime haze pollution. In addition to water-soluble ions and carbon contents, metallic elements in the different size-segregated PM samples were also determined for health risk assessments by inhalation of PM. During the sampling period, the average concentration of PM₁₀ was 274 ± 57 μg m^-3 with a major fraction (73%) of organic material and secondary-related aerosols, and an insignificant portion of trace elements (TEs, ~ 3%). The size distribution showed that As and Se, markers of coal combustion, exhibited a mono-modal distribution with a major peak at 0.4-0.7 μm and the others mostly possessed mono-/bi-modal patterns with a major peak at 3.3-5.8 μm. The cancer risk (CR) resulted from PM₁₀ metals by inhalation was estimated to be 2.91 × 10^-5 for children and 7.75 × 10^-5 for adults while non-cancer risk (NCR) was 2.10 for children and 0.70 for adults. Chromium (Cr) was the dominant species (~89%) of cancer risk in PM₁₀. Road dust was a major fraction (~65%) to total metals in coarse PM (dp > 3.3 μm) whereas coal combustion was a dominant source (~55%) in submicron (dp < 1.1 μm) PM metals. However, traffic emissions (40%) and coal combustion (36%) were the dominant sources of CR since both emissions contributed major fractions (74%) to Cr, especially in submicron PM which exhibited high deposition efficiency of TEs into respiratory tracts, resulting in high CR in Linfen City.

Impact of airborne particulate matter on skin: a systematic review from epidemiology to in vitro studies

BACKGROUND

Air pollution is killing close to 5 million people a year, and harming billions more. Air pollution levels remain extremely high in many parts of the world, and air pollution-associated premature deaths have been reported for urbanized areas, particularly linked to the presence of airborne nano-sized and ultrafine particles.

MAIN TEXT

To date, most of the research studies did focus on the adverse effects of air pollution on the human cardiovascular and respiratory systems. Although the skin is in direct contact with air pollutants, their damaging effects on the skin are still under investigation. Epidemiological data suggested a correlation between exposure to air pollutants and aggravation of symptoms of chronic immunological skin diseases. In this study, a systematic literature review was conducted to understand the current knowledge on the effects of airborne particulate matter on human skin. It aims at providing a deeper understanding of the interactions between air pollutants and skin to further assess their potential risks for human health.

CONCLUSION

Particulate matter was shown to induce a skin barrier dysfunction and provoke the formation of reactive oxygen species through direct and indirect mechanisms, leading to oxidative stress and induced activation of the inflammatory cascade in human skin. Moreover, a positive correlation was reported between extrinsic aging and atopic eczema relative risk with increasing particulate matter exposure.

Toxicological screening of airborne particulate matter in atmosphere of Pune: Reactive oxygen species and cellular toxicity

Present study screened the toxicological assessment of airborne particulate matter (PM), mechanistic investigation, relationship between the physicochemical characteristics and its associated toxic response. The average concentration of both PM₁₀ and PM_2.5 exceeded the Indian National Ambient Air Quality Standards. In present study, PM bound metals; Fe, Cu, Cr, Ni, Mn, Pb, Cd, Zn, Sr and Co have been taken into account with total metal concentration of 0.83 and 0.44 μg m^-3 of PM₁₀ and PM_2.5 mass concentrations, respectively. The contribution of redox active metals (Fe, Cu, Cr, Ni and Mn) in PM was more as compared to non-redox metals (Pb, Cd and Co) indicating significant risk to the exposed population as these metals possess the ability to produce reactive oxygen species (ROS) which are responsible for various diseases. The cytotoxicity profiles of PM samples determined by MTT assay on two different cell lines (A549 and PBMC) exhibited dose-dependent effects after 24 h exposure, but the consequences differ with respect to particle size and sampling periods. A significant decrease in cell viability with varying PM concentrations (20, 40, 60, 80 and 100 μg ml^-1) with respect to control was found in both cell lines. Incubation of RBC suspension with PM samples caused pronounced disruption of RBC and thus exhibited substantial hemolytic behavior. PM samples showed a range of potency to produce reactive oxygen species (ROS). Almost all PM samples increased the level of pro-inflammatory mediator (Nitric oxide) when compared to corresponding unexposed controls suggesting the important role of reactive nitrogen species in induction of cellular toxicity.

Ambient particulate matter oxidative potential: Chemical determinants, associated health effects, and strategies for risk management

Exposure to ambient air pollution has an adverse influence on human health. There is increasing evidence that oxidative potential (OP), the capacity of airborne pollutants to oxidize target molecules by generating redox oxidizing species, is a plausible metric for particulate matter (PM) toxicity. Here we describe the commonly used acellular techniques for measuring OP (respiratory tract lining fluid, dithiothreitol, ascorbic acid, and electron paramagnetic resonance assays) and review the PM chemical constituents that have been identified to drive the OP response. We further perform a review of the epidemiologic literature to identify studies that reported an association between exposure to ambient PM and a health outcome in a human population, and in which exposure was measured by both PM mass concentration and OP. Laboratory studies have shown that specific redox-active metals and quinones are able to contribute OP directly. However, interactions among PM species may alter the redox properties of PM components. In ambient PM measurements, all OP assays were found to be correlated with metals (Fe, Cu) and organic species (photochemically aged organics). Across the epidemiological studies reviewed, associations between fine PM (PM_2.5) mass and cardio-respiratory outcomes were found to be stronger at elevated OP levels but findings varied across the different OP measurement techniques. Future work should aim to identify specific situations in which PM OP can improve air pollution exposure assessment and/or risk management. This may be particularly useful in countries with low PM_2.5 mass concentrations over broad spatial scales where such information may greatly improve the efficiency of risk management activities.

Assessment of Interactions between Transition Metals and Atmospheric Organics: Ascorbic Acid Depletion and Hydroxyl Radical Formation in Organic-Metal Mixtures

Excessive oxidative stress has been recognized as an important cause of the adverse health effects associated with exposure to ambient particulate matter (PM). Transition metals (TMs) (e.g., iron (Fe) and copper (Cu)) are known catalysts in the formation of reactive oxygen species (ROS) in surrogate lung fluid containing antioxidants. Humic-like substances (HULIS), extracted from atmospheric aerosols, retain the compositional complexity of real-world samples. It contains mixtures of organics that chelate TMs and was used in this work to examine the roles of atmospheric organics in affecting ROS formation and antioxidant depletion by TMs. Two types of metal-binding organics known to be present in HULIS, oxygen-containing (i.e., carboxylic acids) and reduced-nitrogen-containing organics (i.e., imidazoles), were first investigated for their effects on the ascorbic acid depletion (denoted as OP_AA) and hydroxyl radical formation (denoted as OP_•OH) from both Fe(II) and Cu(II) in phosphate buffered saline (pH 7.40) containing ascorbic acid. Our results show that carboxylic acids enhance the OP_AA and OP_•OH by TMs while imidazoles suppress them. Similar experiments using three HULIS samples with distinctly different chemical compositions revealed complexity in metal-organics interactions. While ambient HULIS showed negligible impacts, two biomass burning source HULIS samples from rice straw and sugar cane leaf burning displayed unambiguous suppression or enhancement effects on OP_AA and OP_•OH by TMs. The effect was metal-specific and source HULIS-specific. The distinct behaviors of the three HULIS types can be explained by their different chemical compositions, for example, outstanding higher level of alkaloid compounds (e.g., imidazoles) in rice straw burning HULIS was consistent with the suppression effect exerted by this source of HULIS. In addition, we found OP_AA and OP_•OH are well-correlated while the proportion of OP_•OH/OP_AA by Cu is noticeably lower than that by Fe, indicating varying sensitivity of the metals to different OP end points. Our work highlights the importance and complexity of metal-organics interactions and the advantages of comeasurements of ROS generation and antioxidant depletion when assessing oxidative stress elicited by atmospheric PM.

Comparison of light absorption and oxidative potential of biodiesel/diesel and chemicals/diesel blends soot particles

Soot particles, mainly coming from fuel combustion, affect climate forcing through absorbing light and also result in adverse human health outcomes. Though biodiesel or additives blending with diesel was considered environmentally friendly, the understanding on absorbing and oxidative capacity of soot emitted from them are still unclear. The water-soluble organic carbon (WSOC) content, surface chemical structure, light absorption and oxidative potential (OP^DTT) of soot from biodiesel/diesel and chemicals/diesel blends were investigated utilizing total organic carbon analyzer, X-ray photoelectron spectrometer, ultraviolet-visible spectrophotometry and dithiothreitol (DTT) assay. The differences and correlations between soot properties were statistically analyzed. Chemicals/diesel blends soot owned significantly higher WSOC content, ratio of mass absorbing efficiency (MAE) in 250 and 365 nm (E₂/E₃), OP^DTT, and higher surface carbonyl content. Coconut biodiesel/diesel blends soot contained evidently higher aromatic carbon-oxygen single bond (Ar_C-O) content, and higher MAE₃₆₅. The individual comparison of biodiesel/diesel blends showed 20% coconut biodiesel blend owned the lowest WSOC, E₂/E₃ and OP^DTT, while highest Ar_C-O and MAE₃₆₅, representing strongest absorbing properties. Association analysis showed OP^DTT was significantly positively correlated with WSOC. Further, the evident negative correlation between MAE₃₆₅ and OP^DTT was observed. Our results showed coconut biodiesel/diesel blends soot induced lower levels of oxidative potential, whereas absorption of light was higher, which have far reaching consequences on climate forcing. Therefore, it is important to evaluate the balance point between light-absorbing properties and oxidative potential, under the wide use of biodiesel.

Effect of metal-organic interactions on the oxidative potential of mixtures of atmospheric humic-like substances and copper/manganese as investigated by the dithiothreitol assay

Excessive generation of reactive oxygen species (ROS) and the corresponding oxidative stress has been recognized as one important cause for the adverse health effects associated with exposure to ambient particulate matter (PM). Transition metals and humic-like substances (HULIS) in PM have been separately demonstrated to contribute to the oxidative potential (OP) of PM, however, only few studies investigated the impact of their interactions on the measured OP and the effect is little understood. HULIS is an abundant fraction of water-soluble organic material in PM and serves to represent real-world PM organics. In this study, we applied a cell-free dithiothreitol (DTT) assay to quantify the OP, termed as OP_DTT, by two representative transition metals (i.e., copper (Cu) and manganese (Mn)), HULIS, and mixtures of HULIS and metals in concentration levels relevant to those in human lung fluid resulting from PM inhalation. The organic-metal mixture effect was found to be metal-specific and concentration-specific, covering the possibility spectrum from being synergistic, additive to antagonistic. HULIS was observed to suppress OP_DTT up to 10-20% by Cu at a concentration of 0.08 μM while had no discernable effect at 0.5 μM Cu. On the contrary, obvious enhancement of OP_DTT was recorded in the mixtures of HULIS and Mn (e.g. up to ~2 times at 2.5 μM of Mn) while no mixture effects could be discerned at 0.5 μM Mn. Our work demonstrates the need for considering the metal-organic interactions and the complexity when evaluating the total OP of their mixtures, such as ambient PM samples. Further work in metal-PM organics interactions should be conducted using methods capable of measuring specific oxidants, in addition to the ability to deplete the reducing agent (i.e., DTT), in order to acquire a deeper mechanistic insight into the interactions.

Oxidative Potential of Particulate Matter and Generation of Reactive Oxygen Species in Epithelial Lining Fluid

Reactive oxygen species (ROS) play a central role in adverse health effects of atmospheric particulate matter (PM). Respiratory deposition can lead to the formation of ROS in the epithelial lining fluid due to redox reactions of PM components with lung antioxidants. As direct quantification of ROS is challenging, PM oxidative potential is more commonly measured using antioxidant surrogates including dithiothreitol and ascorbic acid, assuming that the decay of surrogates corresponds to ROS formation. However, this assumption has not yet been validated and the lack of ROS quantification in the respiratory tract causes major limitations in evaluating PM impacts on oxidative stress. By combining field measurements of size-segregated chemical composition, a human respiratory tract model, and kinetic modeling, we quantified production rates and concentrations of different types of ROS in different regions of the epithelial lining fluid by considering particle-size-dependent respiratory deposition. The extrathoracic region is found to have higher ROS concentrations compared to the bronchial and alveolar regions. Although H₂O₂ and O₂^- production is governed by Fe and Cu ions, OH radicals are mainly generated by organic compounds and Fenton-like reactions of metal ions. In winter when affected by biomass burning, model comparisons suggest that humic-like substances (HULIS) contribute to ROS formation substantially. We found that PM oxidative potential is a good indicator of the chemical production of H₂O₂ and O₂^- but does not represent OH generation. These results provide rationale and limitations of the use of oxidative potential as an indicator of PM toxicity in epidemiological and toxicological studies.

Review of Acellular Assays of Ambient Particulate Matter Oxidative Potential: Methods and Relationships with Composition, Sources, and Health Effects

Oxidative stress is a potential mechanism of action for particulate matter (PM) toxicity and can occur when the body's antioxidant capacity cannot counteract or detoxify harmful effects of reactive oxygen species (ROS) due to an excess presence of ROS. ROS are introduced to the body via inhalation of PM with these species present on and/or within the particles (particle-bound ROS) and/or through catalytic generation of ROS in vivo after inhaling redox-active PM species (oxidative potential, OP). The recent development of acellular OP measurement techniques has led to a surge in research across the globe. In this review, particle-bound ROS techniques are discussed briefly while OP measurements are the focus due to an increasing number of epidemiologic studies using OP measurements showing associations with adverse health effects in some studies. The most common OP measurement techniques, including the dithiothreitol assay, glutathione assay, and ascorbic acid assay, are discussed along with evidence for utility of OP measurements in epidemiologic studies and PM characteristics that drive different responses between assay types (such as species composition, emission source, and photochemistry). Overall, most OP assays respond to metals like copper than can be found in emission sources like vehicles. Some OP assays respond to organics, especially photochemically aged organics, from sources like biomass burning. Select OP measurements have significant associations with certain cardiorespiratory end points, such as asthma, congestive heart disease, and lung cancer. In fact, multiple studies have found that exposure to OP measured using the dithiothreitol and glutathione assays drives higher risk ratios for certain cardiorespiratory outcomes than PM mass, suggesting OP measurements may be integrating the health-relevant fraction of PM and will be useful tools for future health analyses. The compositional impacts, including species and emission sources, on OP could have serious implications for health-relevant PM exposure. Though more work is needed, OP assays show promise for health studies as they integrate the impacts of PM species and properties on catalytic redox reactions into one measurement, and current work highlights the importance of metals, organic carbon, vehicles, and biomass burning emissions to PM exposures that could impact health.

Mass spectrometry-based metabolomics reveals the mechanism of ambient fine particulate matter and its components on energy metabolic reprogramming in BEAS-2B cells

Exposure to airborne fine particulate matter (PM_2.5) is associated with various adverse effects. However, the molecular mechanism involved in PM_2.5-elicited energy metabolic reprogramming and the toxic chemical determinants within PM_2.5 are not well elucidated. In this study, nontargeted and targeted metabolomics research were conducted to investigate the overall metabolic changes and relevant toxicological pathways caused by Taiyuan winter total PM_2.5 and its water soluble and organic soluble fractions in human lung bronchial epithelial cells (BEAS-2B). The results showed that significant metabolome alterations in BEAS-2B cells were observed after the exposure of total PM_2.5 and its organic soluble fraction. Purine metabolism, arginine and proline metabolism, glutathione (GSH) metabolism, tricarboxylic acid (TCA) cycle and glycolysis were mainly affected. Along with a significant increase of reactive oxygen species (ROS), malondialdehyde (MDA), nitric oxide (NO) and pro-inflammatory cytokines (TNF-α, IL-6 and IL-1β), obvious metabolic phenotype remodeling from oxidative phosphorylation to glycolysis was found in BEAS-2B cells treated with total PM_2.5 and its organic soluble fraction. Compared with water soluble fraction, organic soluble fraction was found to play the dominant role in PM_2.5 toxicity. Our study provided novel insights into the mechanism of PM_2.5-elicited toxicity.

Complexation of Iron and Copper in Ambient Particulate Matter and Its Effect on the Oxidative Potential Measured in a Surrogate Lung Fluid

We investigated the complexation state of atmospheric iron and copper and its impact on the oxidative potential (OP) of ambient PM_2.5 (PM, particulate matter). A novel fractionation scheme was developed to segregate three different fractions of Fe and Cu present in ambient PM_2.5: (i) complexed with hydrophobic organic compounds, (ii) complexed with hydrophilic organic compounds, and (iii) free or inorganic metal fraction. A solid phase extraction (C-18) column was used to separate these fractions. The fractionation scheme applied to the ambient PM_2.5 samples collected from an urban site showed that up to 70-90% of water-soluble Fe and Cu were complexed with the organic compounds. The capability of the complexes of Fe(II) and Cu(II) with Suwanee river fulvic acid (SRFA), a proxy for the atmospheric organic compounds, to generate reactive oxygen species (ROS) (·OH and H₂O₂) in a surrogate lung fluid (SLF) was measured. The complex of Fe-SRFA showed a strong synergistic effect in the generation of ·OH in SLF, while that of Cu-SRFA showed an additive effect. Overall, our results indicate that organic complexation of the metals in ambient PM could significantly alter their OP and needs to be considered while assessing their health impacts.

Oxidative potential of fine ambient particles in various environments

The oxidative potential (OP) and chemical characteristics of fine particles collected from urban, roadside, rural, and industrial sites in Korea during spring, summer, fall, and winter seasons and an urban site in the Philippines during dry and wet seasons were examined. Significant differences in the OP of fine particles among sites and seasons were found. The industrial site yielded the highest OP activity (both mass and volume-normalized OP) among the sites, suggesting the strongest reactive oxygen species (ROS)-generating capability of industry source-dominant PM_2.5. Seasonal data show that OP activities increased during the spring and summer possibly due to increased heavy metals caused by dust events and secondary organic aerosols formed by strong photochemical activity, respectively. The strength of the OP association with the chemical components highlights the influence of organic carbon and transition metals on the OP of ambient fine particles. The two OP assays (dithiothreitol (DTT) and electron spin resonance (ESR)) having different ROS-generating mechanisms were found to have different sensitivities to the chemical components facilitating a complementary analysis of the OP of ambient fine particles. Multiple linear regression model equations (OP as a function of chemical components) which were dependent on the sites were derived. A comparison of the daily OP and hazard index (HI) (the ratio of the measured mass concentration to the reference mass concentration of fine particles) suggests that the HI may not be sufficient to accurately estimate the health effects of fine particles, and a direct or indirect measurement of toxicity such as OP should be required in addition to the concentration level.

Particulate matter containing environmentally persistent free radicals induces AhR-dependent cytokine and reactive oxygen species production in human bronchial epithelial cells

Particulate matter (PM) is emitted during the combustion of fuels and wastes. PM exposure exacerbates pulmonary diseases, and the mechanism may involve oxidative stress. At lower combustion temperatures such as occurs in the cool zone of a flame, aromatic compounds chemisorb to the surface of metal-oxide-containing PM, resulting in the formation of surface-stabilized environmentally persistent free radicals (EPFR). Prior studies showed that PM-containing EPFR redox cycle to produce reactive oxygen species (ROS), and after inhalation, EPFR induce pulmonary inflammation and oxidative stress. Our objective was to elucidate mechanisms linking EPFR-induced oxidant injury with increased cytokine production by pulmonary epithelial cells. We thus treated human bronchial epithelial cells with EPFR at sub-toxic doses and measured ROS and cytokine production. To assess aryl hydrocarbon receptor (AhR) activity, cells were transfected with a luciferase reporter for xenobiotic response element activation. To test whether cytokine production was dependent upon AhR activation or oxidative stress, some cells were co-treated with an antioxidant or an AhR antagonist. EPFR increased IL-6 release in an ROS and AhR- and oxidant-dependent manner. Moreover, EPFR induced an AhR activation that was dependent upon oxidant production, since antioxidant co-treatment blocked AhR activation. On the other hand, EPFR treatment increased a cellular ROS production that was at least partially attenuated by AhR knockdown using siRNA. While AhR activation was correlated with an increased expression of oxidant-producing enzymes like cytochrome P450 CYP1A1, it is possible that AhR activation is both a cause and effect of EPFR-induced ROS. Finally, lipid oxidation products also induced AhR activation. ROS-dependent AhR activation may be a mechanism for altered epithelial cell responses after EPFR exposure, potentially via formation of bioactive lipid or protein oxidation products.

Atmospheric HULIS and its ability to mediate the reactive oxygen species (ROS): A review

Atmospheric humic-like substances (HULIS) are not only an unresolved mixture of macro-organic compounds but also powerful chelating agents in atmospheric particulate matters (PMs); impacting on both the properties of aerosol particles and health effects by generating reactive oxygen species (ROS). Currently, the interests of HULIS are intensively shifting to the investigations of HULIS-metal synergic effects and kinetics modeling studies, as well as the development of HULIS quantification, findings of possible HULIS sources and generation of ROS from HULIS. In light of HULIS studies, we comprehensively review the current knowledge of isolation and physicochemical characterization of HULIS from atmospheric samples as well as HULIS properties (hygroscopic, surface activity, and colloidal) and possible sources of HULIS. This review mainly highlights the generation of reactive oxygen species (ROS) from PMs, HULIS and transition metals, especially iron. This review also summarized the mechanism of iron-organic complexation and recent findings of OH formation from HULIS-metal complexes. This review will be helpful to carry out the modeling studies that concern with HULIS-transition metals and for further studies in the generation of ROS from HULIS-metal complexes.

Synergistic and Antagonistic Interactions among the Particulate Matter Components in Generating Reactive Oxygen Species Based on the Dithiothreitol Assay

We assessed the interactions among the particulate matter (PM) components in generating the reactive oxygen species (ROS) based on a dithiothreitol (DTT) assay. We started with the standard solutions of known redox-active substances, i.e., quinones (9,10-phenanthraquinone, 1,2-naphthoquinone, 1,4-naphthoquinone, and 5-hydroxy-1,4-naphthoquinone) and metals [Fe (II), Mn (II), and Cu (II)]. Both DTT consumption and hydroxyl radical (·OH) generation were measured in the DTT assay. The interactions of Fe were additive with quinones in DTT consumption but strongly synergistic in ·OH generation. Cu showed antagonistic interactions with quinones in both DTT consumption and ·OH generation. Mn interacted synergistically with quinones in DTT oxidation but antagonistically in ·OH generation. The nature of the interactions of these metals (Fe, Mn, and Cu) with ambient humic-like substances (HULIS) resembled that with quinones, although the intensity of interactions were weaker in DTT consumption than ·OH generation. Finally, we demonstrated that the DTT consumption capability of ambient PM can be well explained by HULIS, three transition metals (Fe, Mn, and Cu), and their interactions, but ·OH generation involves a contribution (∼50%) from additional compounds (aliphatic species or metals other than Fe, Mn, and Cu) present in the hydrophilic PM fraction. The study highlights the need to account for the interactions between organic compounds and metals, while apportioning the relative contributions of chemical components in the PM oxidative potential.

A Chemical Perspective of Pharmacology and Toxicology

My chemical training provided a somewhat different perspective of biolo-gical problems, in the problem itself and approaches to its solution. I was fortunate to have in my laboratory postdocs and students who shared this perspective and used appropriate tools to address problems in amphetamine pharmacology and air pollution toxicology. These apparently disparate areas of research shared two chemical reactions: prooxidant-based generation of reactive oxygen and formation of covalent bonds between electrophiles and biological nucleophiles. This article is an attempt to summarize that research and to identify those individuals who made the contributions.

Aerosol Health Effects from Molecular to Global Scales

Poor air quality is globally the largest environmental health risk. Epidemiological studies have uncovered clear relationships of gaseous pollutants and particulate matter (PM) with adverse health outcomes, including mortality by cardiovascular and respiratory diseases. Studies of health impacts by aerosols are highly multidisciplinary with a broad range of scales in space and time. We assess recent advances and future challenges regarding aerosol effects on health from molecular to global scales through epidemiological studies, field measurements, health-related properties of PM, and multiphase interactions of oxidants and PM upon respiratory deposition. Global modeling combined with epidemiological exposure-response functions indicates that ambient air pollution causes more than four million premature deaths per year. Epidemiological studies usually refer to PM mass concentrations, but some health effects may relate to specific constituents such as bioaerosols, polycyclic aromatic compounds, and transition metals. Various analytical techniques and cellular and molecular assays are applied to assess the redox activity of PM and the formation of reactive oxygen species. Multiphase chemical interactions of lung antioxidants with atmospheric pollutants are crucial to the mechanistic and molecular understanding of oxidative stress upon respiratory deposition. The role of distinct PM components in health impacts and mortality needs to be clarified by integrated research on various spatiotemporal scales for better evaluation and mitigation of aerosol effects on public health in the Anthropocene.

Atmospheric levels and cytotoxicity of polycyclic aromatic hydrocarbons and oxygenated-PAHs in PM2.5 in the Beijing-Tianjin-Hebei region

The chemical composition of PM_2.5 and cellular effects from exposure to fine aerosol extracts were studied for samples collected in Beijing, Tianjin, Shijiazhuang, and Hengshui, China in winter 2015. Effects of priority polycyclic aromatic hydrocarbons (PAHs) and their oxygenated derivatives (OPAHs) in PM_2.5 on cell cultures were a major focus of the study. Total quantified PAHs and OPAHs at Shijiazhuang and Hengshui were higher than at Beijing and Tianjin, and benz(a)anthracene, chrysene and 1,8-naphthalic anhydride were the most abundant species. Exposure to PM_2.5 extracts caused a concentration-dependent decline in cell viability and a dose-dependent increase in nitric oxide production. Two cytokines, tumor necrosis factor α (TNF-α) and interleukin 6 (IL-6), also increased when A549 test cells were exposed to PM_2.5 extracts. PAHs and OPAHs in PM_2.5 can potentially cause cell damage and induce cytotoxicity and pro-inflammatory responses: benzo(a)anthracene-7,12-dione was highly correlated with NO production, dibenz(a,h)anthracene and 1,4-chrysenequinone were correlated with TNF-α production, and 1-naphthaldehyde was significantly correlated with IL-6 production. The study provides a new approach for evaluating relationships between air-quality and cell toxicity with respect to specific chemicals.

Rethinking Dithiothreitol-Based Particulate Matter Oxidative Potential: Measuring Dithiothreitol Consumption versus Reactive Oxygen Species Generation

We measured the rate of generation of reactive oxygen species (ROS) [hydroxyl radicals (^•OH) and hydrogen peroxide (H₂O₂)] catalyzed by ambient particulate matter (PM) in the dithiothreitol (DTT) assay. To understand the mechanism of ROS generation, we tested several redox-active substances, such as 9,10-phenanthrenequinone (PQ), 5-hydroxy-1,4-naphthoquinone (5H-1,4NQ), 1,2-naphthoquinone (1,2-NQ), 1,4-naphthoquinone (1,4-NQ), copper(II), manganese(II), and iron (II and III). Both pure compounds and their mixtures show different patterns in DTT oxidation versus ROS generation. The quinones, known to oxidize DTT in the efficiency order of PQ > 5H-1,4NQ > 1,2-NQ > 1,4-NQ, show a different efficiency order (5H-1,4NQ > 1,2-NQ ≈ PQ > 1,4-NQ) in the ROS generation. Cu(II), a dominant metal in DTT oxidation, contributes almost negligibly to the ROS generation. Fe is mostly inactive in DTT oxidation, but shows synergistic effect in ^•OH formation in the presence of other quinones (mixture/sum > 1.5). Ten ambient PM samples collected from an urban site were analyzed, and although DTT oxidation was significantly correlated with H₂O₂ generation (Pearson's r = 0.91), no correlation was observed between DTT oxidation and ^•OH formation. Our results show that measuring both DTT consumption and ROS generation in the DTT assay is important to incorporate the synergistic contribution from different aerosol components and to provide a more inclusive picture of the ROS activity of ambient PM.

Seasonal variation of particle-induced oxidative potential of airborne particulate matter in Beijing

An in vitro plasmid scission assay (PSA), the cell apoptosis assay, and ICP-MS were employed to study the oxidative potentials and trace element compositions of the airborne particulate matter (PM) in Beijing during a one year-long field campaign from June 2010 to June 2011. The cell damages induced by PM reveled by the cell apoptosis assay showed a similar variation pattern to the DNA damages obtained by PSA, verifying the feasibility of the PSA in analyzing the oxidative capacity of PM samples. The PSA experiments showed that the particle-induced DNA damage was highest in summer, followed by spring, winter and autumn in descending order. The percentages of the oxidative damages to plasmid DNA induced by the water-soluble fractions of PM under the particle doses from 10 to 250μg/ml were generally lower than 45%, with some values peaking at above 50%. The peak values were frequently present in late spring (i.e. April and May) and early summer (i.e. June) but they were scarcely observed in other seasons. These peak values were mostly associated with haze days or the days with low wind speed (less than 4m/s), indicating that the PM samples during haze had higher oxidative potential than those during non-haze periods. The oxidative potential induced by the water-soluble fraction of the PM displayed a significant positive correlation with the concentrations of the water-soluble elements Cd, Cs, Pb, Rb, Zn, Be and Bi, demonstrating that the particle-induced oxidative potentials were mainly sourced from these elements. The exposure risk represented by the mass concentration of these elements in unit volume of atmosphere was higher in summer and winter, and lower in autumn and spring. The haze day PM samples not only had higher level of oxidative potentials but also had higher concentrations of water-soluble elements.

An online monitor of the oxidative capacity of aerosols (o-MOCA)

The capacity of airborne particulate matter to generate reactive oxygen species (ROS) has been correlated with the generation of oxidative stress both in vitro and in vivo. The cellular damage from oxidative stress, and by implication with ROS, is associated with several common diseases, such as asthma and chronic obstructive pulmonary disease (COPD), and some neurological diseases. Yet currently available chemical and in vitro assays to determine the oxidative capacity of ambient particles require large samples, analyses are typically done offline, and the results are not immediate. Here we report the development of an online monitor of the oxidative capacity of aerosols (o-MOCA) to provide online, time-resolved assessment of the capacity of airborne particles to generate ROS. Our approach combines the Liquid Spot Sampler (LSS), which collects particles directly into small volumes of liquid, and a chemical module optimized for online measurement of the oxidative capacity of aerosol using the dithiothreitol (DTT) assay. The LSS uses a three-stage, laminar-flow water condensation approach to enable the collection of particles as small as 5 nm into liquid. The DTT assay has been improved to allow the online, time-resolved analysis of samples collected with the LSS but could be adapted to other collection methods or offline analysis of liquid extracts. The o-MOCA was optimized and its performance evaluated using the 9,10-phenanthraquinone (PQ) as a standard redox-active compound. Laboratory testing shows minimum interferences or carryover between consecutive samples, low blanks, and a reproducible, linear response between the DTT consumption rate (nmol min^-1) and PQ concentration (μM). The calculated limit of detection for o-MOCA was 0.15 nmol min^-1. The system was validated with a diesel exhaust particle (DEP) extract, previously characterized and used for the development, improvement, and validation of the standard DTT analysis. The DTT consumption rates (nmol min^-1) obtained with the o-MOCA were within experimental uncertainties of those previously reported for these DEP samples. In ambient air testing, the fully automated o-MOCA was run unattended for 3 days with 3 h time resolution and showed a diurnal and daily variability in the measured consumption rates (nmol min^-1 m^-3).

A bias in the "mass-normalized" DTT response - an effect of non-linear concentration-response curves for copper and manganese

The dithiothreitol (DTT) assay is widely used to measure the oxidative potential of particulate matter. Results are typically presented in mass-normalized units (e.g., pmols DTT lost per minute per microgram PM) to allow for comparison among samples. Use of this unit assumes that the mass-normalized DTT response is constant and independent of the mass concentration of PM added to the DTT assay. However, based on previous work that identified non-linear DTT responses for copper and manganese, this basic assumption (that the mass-normalized DTT response is independent of the concentration of PM added to the assay) should not be true for samples where Cu and Mn contribute significantly to the DTT signal. To test this we measured the DTT response at multiple PM concentrations for eight ambient particulate samples collected at two locations in California. The results confirm that for samples with significant contributions from Cu and Mn, the mass-normalized DTT response can strongly depend on the concentration of PM added to the assay, varying by up to an order of magnitude for PM concentrations between 2 and 34 μg mL^-1. This mass dependence confounds useful interpretation of DTT assay data in samples with significant contributions from Cu and Mn, requiring additional quality control steps to check for this bias. To minimize this problem, we discuss two methods to correct the mass-normalized DTT result and we apply those methods to our samples. We find that it is possible to correct the mass-normalized DTT result, although the correction methods have some drawbacks and add uncertainty to DTT analyses. More broadly, other DTT-active species might also have non-linear concentration-responses in the assay and cause a bias. In addition, the same problem of Cu- and Mn-mediated bias in mass-normalized DTT results might affect other measures of acellular redox activity in PM and needs to be addressed.

Addressing Emerging Risks: Scientific and Regulatory Challenges Associated with Environmentally Persistent Free Radicals

Airborne fine and ultrafine particulate matter (PM) are often generated through widely-used thermal processes such as the combustion of fuels or the thermal decomposition of waste. Residents near Superfund sites are exposed to PM through the inhalation of windblown dust, ingestion of soil and sediments, and inhalation of emissions from the on-site thermal treatment of contaminated soils. Epidemiological evidence supports a link between exposure to airborne PM and an increased risk of cardiovascular and pulmonary diseases. It is well-known that during combustion processes, incomplete combustion can lead to the production of organic pollutants that can adsorb to the surface of PM. Recent studies have demonstrated that their interaction with metal centers can lead to the generation of a surface stabilized metal-radical complex capable of redox cycling to produce ROS. Moreover, these free radicals can persist in the environment, hence their designation as Environmentally Persistent Free Radicals (EPFR). EPFR has been demonstrated in both ambient air PM_2.5 (diameter < 2.5 µm) and in PM from a variety of combustion sources. Thus, low-temperature, thermal treatment of soils can potentially increase the concentration of EPFR in areas in and around Superfund sites. In this review, we will outline the evidence to date supporting EPFR formation and its environmental significance. Furthermore, we will address the lack of methodologies for specifically addressing its risk assessment and challenges associated with regulating this new, emerging contaminant.

Effects of Size-Fractionated Particulate Matter on Cellular Oxidant Radical Generation in Human Bronchial Epithelial BEAS-2B Cells

The aim of the present study was to investigate the effects of size-fractionated (i.e., <1; 1-2.5, and 2.5-10 µm in an aerodynamic diameter) ambient particulate matter (PM) on reactive oxygen species (ROS) activity and cell viability in human bronchial epithelial cells (BEAS-2B). The PM samples were collected from an urban site (uPM) in Beijing and a steel factory site (sPM) in Anshan, China, from March 2013 to December 2014. Metal elements, organic and elemental carbon, and water-soluble inorganic ions in the uPM and sPM were analyzed. The cell viability and ROS generation in PM-exposed BEAS-2B cells were measured by MTS and DCFH-DA. The results showed that both uPM and sPM caused a decrease in the cell viability and an increase in ROS generation. The level of ROS measured in sPM1.0 was approximately triple that in uPM1.0. The results of correlation analysis showed that the ROS activity and cytotoxicity were related to different PM composition. Moreover, deferoxamine (DFO) significantly prevented the increase of ROS generation and the decrease of cell viability. Taken together, our results suggest that the metals absorbed on PM induced oxidant radical generation in BEAS-2B cells that could lead to impairment of pulmonary function.

A Novel High-Throughput Approach to Measure Hydroxyl Radicals Induced by Airborne Particulate Matter

Oxidative stress is one of the key mechanisms linking ambient particulate matter (PM) exposure with various adverse health effects. The oxidative potential of PM has been used to characterize the ability of PM induced oxidative stress. Hydroxyl radical (•OH) is the most destructive radical produced by PM. However, there is currently no high-throughput approach which can rapidly measure PM-induced •OH for a large number of samples with an automated system. This study evaluated four existing molecular probes (disodium terephthalate, 3′-p-(aminophenyl)fluorescein, coumarin-3-carboxylic acid, and sodium benzoate) for their applicability to measure •OH induced by PM in a high-throughput cell-free system using fluorescence techniques, based on both our experiments and on an assessment of the physicochemical properties of the probes reported in the literature. Disodium terephthalate (TPT) was the most applicable molecular probe to measure •OH induced by PM, due to its high solubility, high stability of the corresponding fluorescent product (i.e., 2-hydroxyterephthalic acid), high yield compared with the other molecular probes, and stable fluorescence intensity in a wide range of pH environments. TPT was applied in a high-throughput format to measure PM (NIST 1648a)-induced •OH, in phosphate buffered saline. The formed fluorescent product was measured at designated time points up to 2 h. The fluorescent product of TPT had a detection limit of 17.59 nM. The soluble fraction of PM contributed approximately 76.9% of the •OH induced by total PM, and the soluble metal ions of PM contributed 57.4% of the overall •OH formation. This study provides a promising cost-effective high-throughput method to measure •OH induced by PM on a routine basis.

Rates of Hydroxyl Radical Production from Transition Metals and Quinones in a Surrogate Lung Fluid

Hydroxyl radical ((•)OH) is the most reactive, and perhaps most detrimental to health, of the reactive oxygen species. (•)OH production in lungs following inhalation of particulate matter (PM) can result from redox-active chemicals, including iron and copper, but the relative importance of these species is unknown. This work investigates (•)OH production from iron, copper, and quinones, both individually and in mixtures at atmospherically relevant concentrations. Iron, copper, and three of the four quinones (1,2-naphthoquinone, phenanthrenequinone and 1,4-naphthoquinone) produce (•)OH. Mixtures of copper or quinones with iron synergistically produce (•)OH at a rate 20-130% higher than the sum of the rates of the individual redox-active species. We developed a regression equation from 20 mixtures to predict the rate of (•)OH production from the particle composition. For typical PM compositions, iron and copper account for most (•)OH production, whereas quinones are a minor source, although they can contribute if present at very high concentrations. This work shows that Cu contributes significantly to (•)OH production in ambient PM; other work has shown that Cu appears to be the primary driver of HOOH production and dithiothreitol (DTT) loss in ambient PM extracts. Taken together, these results indicate that copper appears to be the most important individual contributor to direct oxidant production from inhaled PM.