Food processing by high hydrostatic pressure

The Novel Concept of Synergically Combining: High Hydrostatic Pressure and Lytic Bacteriophages to Eliminate Vegetative and Spore-Forming Bacteria in Food Products

The article focuses on the ongoing challenge of eliminating vegetative and spore-forming bacteria from food products that exhibit resistance to the traditional preservation methods. In response to this need, the authors highlight an innovative approach based on the synergistic utilization of high-hydrostatic-pressure (HHP) and lytic bacteriophages. The article reviews the current research on the use of HHP and lytic bacteriophages to combat bacteria in food products. The scope includes a comprehensive review of the existing literature on bacterial cell damage following HHP application, aiming to elucidate the synergistic effects of these technologies. Through this in-depth analysis, the article aims to contribute to a deeper understanding of how these innovative techniques can improve food safety and quality. There is no available research on the use of HHP and bacteriophages in the elimination of spore-forming bacteria; however, an important role of the synergistic effect of HHP and lytic bacteriophages with the appropriate adjustment of the parameters has been demonstrated in the more effective elimination of non-spore-forming bacteria from food products. This suggests that, when using this approach in the case of spore-forming bacteria, there is a high chance of the effective inactivation of this biological threat.

Advancements in Pulse Starches: Exploring Non-Thermal Modification Methods

The surge in the global demand for plant-based proteins has catapulted pulse protein into the spotlight. To ensure economic viability and sustainable production, it is crucial to utilize pulse starch, a by-product of plant protein fractionation. Despite the increasing interest in pulse starches, there is a notable gap in knowledge regarding their modifications and applications compared to cereal and tuber starches. Non-thermal techniques such as electron beam radiation, static high pressure, microfluidization, and cold plasma are emerging as innovative methods for starch modification. These techniques offer significant advantages, including enhanced safety, environmental sustainability, and the development of unique functional properties unattainable through conventional methods. However, challenges such as equipment availability, high costs, and energy consumption hinder their widespread adoption. In light of the growing emphasis on "clean and green labelling" and effective "waste management" in food production, evaluating non-thermal techniques for pulse starch modification is critical. This review aims to thoroughly assess these non-thermal techniques and their combinations, offering valuable insights for researchers and the food industry. By maximizing the potential of pulse starches in innovative food applications, it provides a comprehensive guide for effective non-thermal methods that add value and align with sustainable practices.

Effects of High Hydrostatic Pressure on the Distribution of Oligosaccharides, Pinitol, Soysapapogenol A, and Fatty Acids in Soybean

The effects of high hydrostatic pressure (HHP) treatment (100-600 MPa for 10-60 min) and thermal treatment (boiling for 10-60 min) on oligosaccharides, pinitol, and soyasapogenol A as taste ingredients in soybean (Glycine max (L.) Merr.) (cv. Yukihomare) were evaluated. Additionally, soybean-derived fatty acids such as α-linolenic acid, linoleic acid, oleic acid, palmitic acid, and stearic acid in pressurized soybeans were quantitatively analyzed. Sucrose, stachyose, and raffinose concentrations were decreased in all tested pressure and time combinations; however, pinitol concentrations were increased by specific pressure and time combinations at 100-400 MPa for 10-60 min. While the soyasapogenol A content in boiled soybeans decreased with increasing boiling time, that of pressurized soybeans was altered by specific pressure and time combinations. At the lower pressure and shorter time combinations, the essential fatty acids such as α-linolenic acid and linoleic acid showed higher contents. Stearic acid and oleic acid contents of pressurized soybeans increased at mild pressure levels (300-500 MPa). In contrast, the combination of higher pressure and longer time results in lower essential fatty acid contents. Non-thermal-pressurized soybeans have the potential to be a high-value food source with better taste due to the enrichment of low molecular weight components such as pinitol, free amino acids, and the reduction of isoflavones and Group A soyasapogenol.

Importance of Intracellular Energy Status on High-Hydrostatic-Pressure Inactivation of sake Yeast Saccharomyces cerevisiae

The HHP inactivation behaviors of Niigata sake yeast Saccharomyces cerevisiae strain S9arg and its aerobic respiratory-deficient mutant strains were investigated after cultivating them in a YPD media containing 2% to 15% glucose, as well as in moromi mash, in a laboratory-scale sake brewing process. The piezotolerance of strain S9arg, shown after cultivation in a YPD medium containing 2% glucose, decreased to become piezosensitive with increasing glucose concentrations in YPD media. In contrast, the piezosensitivity of a mutant strain UV1, shown after cultivation in the YPD medium containing 2% glucose, decreased to become piezotolerant with increasing glucose concentrations in the YPD medium. The intracellular ATP concentrations were analyzed for an S. cerevisiae strain with intact aerobic respiratory ability, as well as for strain UV1. The higher concentration of ATP after cultivation suggested a higher energy status and may be closely related to higher piezotolerance for the yeast strains. The decreased piezotolerance of strain S9arg observed after a laboratory-scale sake brewing test may be due to a lower energy status resulting from a high glucose concentration in moromi mash during the early period of brewing, as well as a lower aeration efficiency during the brewing process, compared with cultivation in a YPD medium containing 2% glucose.

Thermal and Modern, Non-Thermal Method Induction as a Factor of Modification of Inulin Hydrogel Properties

The aim of the study was to compare the properties of inulin hydrogels obtained with different methods, e.g., the traditional-thermal method and new, non-thermal methods, used in food production, like ultrasonic, high-pressure homogenization (HPH), and high hydrostatic pressures (HHPs). It was found that each of the compared induction methods allowed for obtaining inulin hydrogels. However, the use of non-thermal induction methods allows for obtaining a gel structure faster than in the case of thermal induction. In addition, hydrogels obtained with new, non-thermal methods differ from gels obtained with thermal treatment. They were characterized by higher stability (from 1.7 percent point-of-stability parameters for HHP 150 MPa to 18.8 for HPH II cycles) and in most cases, by improved microrheological properties-lower solid-liquid balance toward the solid phase, increased elasticity and viscosity indexes, and lowering the flow index. The gels obtained with the new, non-thermal method were also characterized by a more delicate structure, including lower firmness (the differences between thermal and non-thermal inductions were from 0.73 N for HHP at 500 MPa to 2.39 N for HHP at 150 MPa) and spreadability (the differences between thermal and non-thermal inductions were from 7.60 Ns for HHP at 500 MPa to 15.08 Ns for HHP at 150 MPa). The color of ultrasound-induced inulin gels, regarding the HPH and HHP technique, was darker (the differences in the L* parameter between thermal and non-thermal inductions were from 1.92 for HHP at 500 MPa to 4.37 for 10 min ultrasounds) and with a lower a* color parameter (the differences in the a* parameter between thermal and non-thermal inductions were from 0.16 for HHP at 500 MPa to 0.39 for HPH II cycles) and b* color parameter (the differences in the b* parameter between thermal and non-thermal inductions were from 1.69 for 5 min ultrasounds to 2.68 for HPH II cycles). It was also found that among the compared induction methods, the high-pressure technique has the greatest potential for modifying the properties of the created inulin hydrogels. Thanks to its application, depending on the amount of applied pressure, it was possible to obtain gels with very different characteristics, both delicate (i.e., soft and spreadable), using HHP at 150 MPa, and hard, using HHP at 500 MPa, the closest in characteristics to gels induced with the thermal method. This may allow the properties of hydrogels to be matched to the characteristics of the food matrix being created.

Microbial communities in freshwater used for hydraulic fracturing are unable to withstand the high temperatures and pressures characteristic of fractured shales

Natural gas is recovered from shale formations by hydraulic fracturing, a process known to create microbial ecosystems in the deep subsurface. Microbial communities that emerge in fractured shales include organisms known to degrade fracturing fluid additives and contribute to corrosion of well infrastructure. In order to limit these negative microbial processes, it is essential to constrain the source of the responsible micro-organisms. Previous studies have identified a number of potential sources, including fracturing fluids and drilling muds, yet these sources remain largely untested. Here, we apply high-pressure experimental approaches to assess whether the microbial community in synthetic fracturing fluid made from freshwater reservoir water can withstand the temperature and pressure conditions of hydraulic fracturing and the fractured shale environment. Using cell enumerations, DNA extraction and culturing, we show that the community can withstand high pressure or high temperature alone, but the combination of both is fatal. These results suggest that initial freshwater-based fracturing fluids are an unlikely source of micro-organisms in fractured shales. These findings indicate that potentially problematic lineages, such as sulfidogenic strains of Halanaerobium that have been found to dominate fractured shale microbial communities, likely derive from other input sources into the downwell environment, such as drilling muds.

Review on Furan as a Food Processing Contaminant: Identifying Research Progress and Technical Challenges for Future Research

A wide range of food processing contaminants (FPCs) are usually formed while thermal processing of food products. Furan is a highly volatile compound among FPCs and could be formed in a variety of thermally processed foods. Therefore, identification of possible reasons of furan occurrence in different thermally processed foods, identification of the most consequential sources of furan exposure, factors impacting its formation, and its detection by specific analytical approaches are necessary to indicate gaps and challenges for future research findings. Furthermore, controlling furan formation in processed foods on a factory scale is also challenging, and research advancements are still ongoing in this context. Meanwhile, understanding adverse effects of furan on human health on a molecular level is necessary to gain insights into human risk assessment.

Dietary fiber modification: structure, physicochemical properties, bioactivities, and application-a review

There is increasing attention on the modification of dietary fiber (DF), since its effective improvement on properties and functions of DF. Modification of DF can change their structure and functions to enhance their bioactivities, and endow them with huge application potential in the field of food and nutrition. Here, we classified and explained the different modification methods of DF, especially dietary polysaccharides. Different modification methods exert variable effects on the chemical structure of DF such as molecular weight, monosaccharide composition, functional groups, chain structure, and conformation. Moreover, we have discussed the change in physicochemical properties and biological activities of DF, resulting from alterations in the chemical structure of DF, along with a few applications of modified DF. Finally, we have summarized the modified effects of DF. This review will provide a foundation for further studies on DF modification and promote the future application of DF in food products.

Antidiabetic properties of mango in animal models and humans: A systematic review

Mango has long been an attractive source of nutrition and pharmacological therapeutics. The mango plant (Mangifera indica L.) contains bioactive compounds that may have antidiabetic properties. This systematic review investigated the evidence for antidiabetic properties of the different parts of the mango plant in managing type 2 diabetes mellitus in animal models and humans. The electronic databases PubMed, FSTA, Web of Science, CINAHL, MEDLINE, and Cochrane Library were systematically searched to identify articles with clear objectives and methodologies available in the English language with publication date limits up to December 2020. Twenty-eight of 1001 animal and human studies met the inclusion criteria that investigated antidiabetic properties of mango from leaf (31%), flesh (38%), seed-kernel (7%), peel (14%), stem-bark (7%), and by-product (3%). Results support the glucose-lowering properties of mango in both animals and human. Proposed antidiabetic mechanisms of action include inhibition of α-amylase and α-glucosidase, improved antioxidant status, improved insulin sensitivity, facilitated glucose uptake, and gene regulation of glucose transporter type 4, insulin receptor substrate 1, and phosphoinositide 3-kinase. The animal and randomized control trial findings suggest that mango may be beneficial as an antidiabetic agent. Although these studies hold promise, additional observational studies and randomized control trials are required because human studies are significantly fewer in number, use mango flesh almost exclusively, and had modest blood glucose effects. Additional research gaps include identifying the mechanisms of action for the different components of the mango plant.

Potential Application of High Hydrostatic Pressure on the Production of Hydrolyzed Proteins with Antioxidant and Antihypertensive Properties and Low Allergenicity: A Review

The high hydrostatic pressure (HHP) process has been studied for several applications in food technology and has been commercially implemented in several countries, mainly for non-thermal pasteurization and shelf-life extension of food products. HHP processing has been demonstrated to accelerate proteolytic hydrolysis at a specific combination of pressure and pressure-holding time for a given protein source and enzyme. The enzymatic hydrolysis of proteins is a well-known alternative to producing biologically active peptides, with antioxidant and antihypertensive capacity, from different food protein sources. However, some of these protein sources contain allergenic epitopes which are often not degraded by traditional hydrolysis. Moreover, the peptide profile and related biological activity of a hydrolysate depend on the protein source, the enzymes used, the parameters of the proteolysis process (pH, temperature, time of hydrolysis), and the use of other technologies such as HHP. The present review aims to provide an update on the use of HHP for improving enzymatic hydrolysis, with a particular focus on studies which evaluated hydrolysate antihypertensive and antioxidant capacity, as well as residual allergenicity. Overall, HHP has been shown to improve the biological properties of hydrolysates. While protein allergenicity can be reduced with traditional hydrolysis, HHP can further reduce the allergenicity. Compared with traditional hydrolysis methods, HHP-assisted protein hydrolysis offers a greater opportunity to add value to protein-rich products through conversion into high-end hydrolysate products with enhanced nutritional and functional properties.

Antioxidant peptides: Overview of production, properties, and applications in food systems

In recent years, several studies have reported the beneficial effects of antioxidant peptides in delaying oxidation reactions. Thus, a growing number of food proteins have been investigated as suitable sources for obtaining these antioxidant peptides. In this study, some of the most critical developments in the discovery of peptidic antioxidants are discussed. Initially, the primary methods to release, purify, and identify these antioxidant peptides from various food-derived sources are reviewed. Then, computer-based screening methods of the available peptides are summarized, and methods to interpret their structure-activity relationship are illustrated. Finally, approaches to the large-scale production of these bioactive peptides are described. In addition, the applications of these antioxidants in food systems are discussed, and gaps, future challenges, and opportunities in this field are highlighted. In conclusion, various food items can be considered promising sources to obtain these novel antioxidant peptides, which present various opportunities for food applications in addition to health promotion. The lack of in-depth data on the link between the structure and activity of these antioxidants, which is critical for the prediction of possible bioactive amino acid sequences and their potency in food systems and in vivo conditions (rather than in vitro systems), requires further attention. Consequently, future collaborative research activities between the industry and academia are required to realize the commercialization objectives of these novel antioxidant peptides.

Effect of microfluidization on quality characteristics of sapodilla (Manilkara achras L.) juice

Various oxidative enzymes account for the quality degradation of sapodilla (Manilkara achras L.) juice and need to be inactivated through emerging and continuous green pressure processing technology. In this study, pressurization of sapodilla juice was attempted via microfluidization (MF) at pressure range of 10,000-30,000 pound per square inch (psi) with 1-3 passes or cycles. The impact of microfluidization on the activity of polyphenol oxidase (PPO), peroxidase (POD), color, total soluble solid (TSS), viscosity, serum cloudiness along with particle size, and microbial load of sapodilla juice was assessed. Results showed that microfluidization (MF) decreased the residual PPO activity from 100 to 80.78 % and POD activity from 100 to 40.57%. However, TSS (18.81-19.01 %), viscosity (2.64-2.06 cP), serum cloudiness (2.19-1.22 %) and total color change (3.19-18.54) was also significantly affected. Most of these changes were observed due to particle size (PS) reduction that varied from 65.19 to 8.13 μm. Microfluidized juice revealed color improvement at particular MF pressure and pass due to enzyme inactivation. Moreover, lowest microbial load (2.89 Log CFU/ mL) was found at 30,000 psi/3 pass of MF as compared to control sample (unprocessed juice) (7.57 Log CFU/ mL). Consequently, MF can be potential candidate in processing of juices against spoilage.

Transcriptome Analysis of the Influence of High-Pressure Carbon Dioxide on Saccharomyces cerevisiae under Sub-Lethal Condition

High-pressure carbon dioxide (HPCD), a novel non-thermal pasteurization technology, has attracted the attention of scientists due to its high pasteurization efficiency at a lower temperature and pressure. However, the inactivation mechanism has not been well researched, and this has hindered its commercial application. In this work, we used a sub-lethal HPCD condition (4.0 MPa, 30 °C) and a recovery condition (30 °C) to repair the damaged cells. Transcriptome analysis was performed by using RNA sequencing and gene ontology analysis to investigate the detailed lethal mechanism caused by HPCD treatment. RT-qPCR analysis was conducted for certain upregulated genes, and the influence of HPCD on protoplasts and single-gene deletion strains was investigated. Six major categories of upregulated genes were identified, including genes associated with the pentose phosphate pathway (oxidative phase), cell wall organization or biogenesis, glutathione metabolism, protein refolding, phosphatidylcholine biosynthesis, and AdoMet synthesis, which are all considered to be associated with cell death induced by HPCD. The inactivation or structure alteration of YNL194Cp in the organelle membrane is considered the critical reason for cell death. We believe this work contributes to elucidating the cell-death mechanism and providing a direction for further research on non-thermal HPCD sterilization technology.

Improving Soy Sauce Aroma Using High Hydrostatic Pressure and the Preliminary Mechanism

Using high hydrostatic pressure (HHP) to treat liquid foods can improve their aroma; however, no information about the effects of HHP on soy sauce aroma has yet been reported. The effects of HHP on the aroma of soy sauce fermented for 30 d were investigated using quantitative descriptive analysis (QDA), SPME-GC-olfactometry/MS, hierarchical cluster analysis (HCA) and principal component analysis (PCA). Results showed that the pressure used during HHP treatment had a greater influence on soy sauce aroma than the duration of HHP. Compared to the control, soy sauce that was treated with HHP at 400 MPa for 30 min (HHP400-30) obtained the highest sensory score (33% higher) by increasing its sour (7%), malty (9%), floral (27%) and caramel-like (47%) aromas, while decreasing its alcoholic (6%), fruity (6%) and smoky (12%) aromas; moreover, the aroma of HHP400-30 soy sauce was comparable with that of soy sauce fermented for 180 d. Further investigation demonstrated that HHP (400 MPa/30 min) enhanced the OAVs of compounds with sour (19%), malty (37%), floral (37%), caramel-like (49%) and other aromas (118%), and lowered the OAVs of compounds with alcoholic (5%), fruity (12%) and smoky (17%) aromas. These results were consistent with the results of the QDA. HHP treatment positively regulated the Maillard, oxidation and hydrolysis reactions in raw soy sauce, which resulted in the improvement and accelerated formation of raw soy sauce aroma. HHP was capable of simultaneously improving raw soy sauce aroma while accelerating its aroma formation, and this could treatment become a new alternative process involved in the production of high-quality soy sauce.

Microbiota and Mycobiota of Soy Sauce-Supplied Lactic Acid Bacteria Treated with High Pressure

Background: Ethyl carbamate (EC), a byproduct that naturally forms in fermented foods, can cause tumors and cell death and is classified as a probable human carcinogen (Group 2A). EC is naturally formed through the alcoholysis reaction between ethanol and carbamyl compounds. The major precursors and dominantly emerging stages of EC differ with disparate food types, including soy sauce. This work aimed to clarify the formation of EC and its influence factors throughout the soy sauce production process with or without high-pressure process (HPP) treatment. Methods: Tetragenococcus halophilus, Pediococcus acidilactici, Zygosaccharomyces rouxii, and Candida versatilis were added to soy sauce. The levels of citrulline and EC were measured, and a 16S and ITS assay investigated the microbiota. Results: L-citrulline production was found in each group after fermentation for one month. In addition, L-citrulline levels were generated the most in group D (500 MPa treated raw soy sauce with 12% saltwater and mixed fermentation bacteria, including T. halophilus,P. acidilactici,Z. rouxii, and C. versatilis) and group E (soy sauce fermentation with 12% saltwater without HPP treatment) compared to group F (soy sauce fermentation with 18% saltwater without HPP treatment). Conclusions: These results indicated that salt concentration and mixed fermentation bacteria (T. halophilus,P. acidilactici,Z. rouxii,C. versatilis) might not be major factors for L-citrulline production.

Plasma-Activated Water for Food Safety and Quality: A Review of Recent Developments

Plasma-activated water (PAW) has received a lot of attention lately because of its antibacterial efficacy and eco-friendly nature. Compared to traditional disinfectants, this novel and intriguing option has a high disinfectant capacity while causing little to no modifications to the foodstuffs. Until now, PAW has successfully demonstrated its effectiveness against a broad range of microorganisms on a wide variety of food items. Though the efficacy of PAW in microbial reduction has been extensively reviewed, a relatively significant issue of food quality has been largely overlooked. This review aims to summarize the current studies on the physicochemical characteristics and antimicrobial potential of PAW, with an in-depth focus on food quality and safety. According to recent studies, PAW can be a potential microbial disinfectant that extends the shelf life of various food products, such as meat and fish products, fruits and vegetables, cereal products, etc. However, the efficacy varies with treatment conditions and the food ingredients applied. There is a mixed opinion about the effect of PAW on food quality. Based on the available literature, it can be concluded that there has been no substantial change in the biochemical properties of most of the tested food products. However, some fruits and vegetables had a higher value for the enzyme superoxide dismutase (SOD) after PAW treatment, while only a few demonstrated a decrease in the Thiobarbituric acid reactive substances (TBARS) value. Sensory properties also showed no significant difference, with some exceptions in meat and fish products.

Conventional and Novel Technologies in the Production of Dairy Bioactive Peptides

Background

In recent years, researchers have focused on functional ingredients, functional foods, and nutraceuticals due to the rapidly increasing interest in bioactive components, especially in bioactive peptides. Dairy proteins are a rich and balanced source of amino acids and their derived bioactive peptides, which possess biological and physiological properties. In the dairy industry, microbial fermentation and enzymatic hydrolysis are promising methods for producing bioactive peptides because of their rapid efficiency, and mild reaction conditions. However, these methods utilize less raw material, take long reaction time, result in low yields, and low activity products when used alone, which pose industry to seek for novel methods as pretreatments to increase the yield of bioactive peptides.

Scope and Approach

This review emphasizes the production of peptides from the dairy proteins and discusses the potential use of novel technologies as pretreatments to conventional methods of bioactive peptides production from dairy proteins, including the mechanisms of novel technologies along with respective examples of use, advantages, limitations, and challenges to each technology.

Key Findings and Conclusion

Noteworthily, hydrolysis of dairy proteins liberate wide-range of peptides that possess remarkable biological functions to maintain human health. Novel technologies in the dairy industry such as ultrasound-assisted processing (UAP), microwave-assisted processing (MAP), and high pressure processing (HPP) are innovative and environmentally friendly. Generally, novel technologies are less effectual compared to conventional methods, therefore used in combination with fermentation and enzymatic hydrolysis, and are promising pretreatments to modify peptides’ profile, improve the yields, and high liberation of bioactive peptides as compared to conventional technologies. UAP is an innovative and most efficient technology as its mechanical effects and cavitation change the protein conformation, increase the biological activities of enzymes, and enhance enzymatic hydrolysis reaction rate.

The effect of high hydrostatic pressure on tetracycline hydrochloride and sulfathiazole residues in various food matrices - comparison with ultrasound and heat treatment

Antibiotic residues in food pose serious direct and indirect risks for consumers. The aim of this study was to investigate the effect of High Hydrostatic Pressure (HHP) on tetracycline hydrochloride (TCH) and sulfathiazole (STZ) residues in honey, milk, and water. Three different pressures were tested for their efficiency and treatment at 580 MPa for 6 min was finally selected. Qualitative and quantitative determination of antibiotics were performed with HPLC and LC-MS. HHP treatment was compared to ultrasound and heat treatment. HHP treatment was found to be more effective than the other two methods for both antibiotics in water and milk. The reduction of STZ in honey was over 90%, while no reduction was observed for TCH. The highest TCH reduction was recorded after HHP treatment in water (76.4%) and the highest STZ reduction after ultrasound treatment in honey (94.3%). Reduction of the two antibiotics in different matrices did not follow a similar pattern. For the HHP treatment, the effect of the initial concentration of the two antibiotics was studied under two different storage conditions (refrigerated and frozen storage). The effectiveness of the method was found to be affected by the initial concentration, in both storage conditions for STZ, while for TCH significant differences were observed only for refrigerated storage.

Enterocin: Promising Biopreservative Produced by Enterococcus sp

Food preservation is a method used to handle and treat food products to slow down food spoilage and subsequently reduce the risk of foodborne illness. Nowadays, the demand for natural preservatives over chemical preservatives in food is increasing due to the awareness of consuming healthy food products without the risk of harmful side effects. Thus, the research and development of preservation techniques, referred to as biopreservation, is growing rapidly. In biopreservation methods, microorganisms that are known as lactic acid bacteria (LAB) and their antimicrobial substances are used to extend shelf life and maintain the nutritional value of foods. Among the most studied LAB are from the genus Enterococcus, which produces a bacteriocin called enterocin. Bacteriocins are ribosomal-synthesized antimicrobial peptides that are capable of inhibiting the growth of pathogenic bacteria that cause spoilage in food. LAB is generally regarded as safe (GRAS) for human consumption. The current application of LAB, notably Enterococcus sp. in the biopreservation of meat and meat-based products was highlighted in this review. This report also includes information on the effects of enzymes, temperature, and pH on the stability of bacteriocin produced by Enterococcus sp. An extensive compilation of numerous industry procedures for preserving meat has also been emphasized, highlighting the benefits and drawbacks of each method.

The efficacy and safety of high-pressure processing of food

High-pressure processing (HPP) is a non-thermal treatment in which, for microbial inactivation, foods are subjected to isostatic pressures (P) of 400-600 MPa with common holding times (t) from 1.5 to 6 min. The main factors that influence the efficacy (log10 reduction of vegetative microorganisms) of HPP when applied to foodstuffs are intrinsic (e.g. water activity and pH), extrinsic (P and t) and microorganism-related (type, taxonomic unit, strain and physiological state). It was concluded that HPP of food will not present any additional microbial or chemical food safety concerns when compared to other routinely applied treatments (e.g. pasteurisation). Pathogen reductions in milk/colostrum caused by the current HPP conditions applied by the industry are lower than those achieved by the legal requirements for thermal pasteurisation. However, HPP minimum requirements (P/t combinations) could be identified to achieve specific log10 reductions of relevant hazards based on performance criteria (PC) proposed by international standard agencies (5-8 log10 reductions). The most stringent HPP conditions used industrially (600 MPa, 6 min) would achieve the above-mentioned PC, except for Staphylococcus aureus. Alkaline phosphatase (ALP), the endogenous milk enzyme that is widely used to verify adequate thermal pasteurisation of cows' milk, is relatively pressure resistant and its use would be limited to that of an overprocessing indicator. Current data are not robust enough to support the proposal of an appropriate indicator to verify the efficacy of HPP under the current HPP conditions applied by the industry. Minimum HPP requirements to reduce Listeria monocytogenes levels by specific log10 reductions could be identified when HPP is applied to ready-to-eat (RTE) cooked meat products, but not for other types of RTE foods. These identified minimum requirements would result in the inactivation of other relevant pathogens (Salmonella and Escherichia coli) in these RTE foods to a similar or higher extent.

The Bacterial and Fungi Microbiota of Soy Sauce-Supplied Lactic Acid Bacteria Treated with High-Pressure Process

Background: Soy sauce is applied as a seasoning in daily life in East Asia. High amounts of salt in soy sauce can inhibit microbial growth in its production and preservation. However, the elevated salt content in food might increase the health risk. Low salt fermentation is rarely used in soil sauce production because of the potential harmful lactic acid bacteria growth. Therefore, dilution after high salt fermentation is commonly used to reduce the salt concentration. Methods: This study aims to treat the low salt fermented soy sauce with a high hydrostatic pressure process (HPP) to eliminate the harmful bacteria and to analyze the microbial community change compared with that in traditional high salt fermentation. Results: The results showed that the bacterial diversity was increased in low-salt and high-pressure (LS-HP)-treated soy sauce, though the bacterial abundance was decreased. Relative abundance in high-salt (HS), low-salt (LS), and LS-HP-treated soy sauce showed specific bacterial strains in the LS-HP group. Similarly, the fungal diversity was also increased in LS-HP-fermented soy sauce and the detected OTUs were increased. The fungi sensitive to salinity and pressure were indicated in our results. Conclusions: The present study suggests the enhanced bacterial and fungal diversity and different microbial community in HS, LS, and LS-HP-treated soy sauce, as well as the availability of LS and HPP treatment on soy sauce production.

Extraction of functional extracts from berries and their high quality processing: a comprehensive review

Berry fruits have attracted increasing more attention of the food processing industry as well as consumers due to their widely acclaimed advantages as highly effective anti-oxidant properties which may provide protection against some cancers as well as aging. However, the conventional extraction methods are inefficient and wasteful of solvent utilization. This paper presents a critical overview of some novel extraction methods applicable to berries, including pressurized-liquid extraction, ultrasound-assisted extraction, microwave-assisted extraction, supercritical fluid extraction, enzyme-assisted extraction as well as some combined extraction methods. When combined with conventional methods, the new technologies can be more efficient and environmentally friendly. Additionally, high quality processing of the functional extracts from berry fruits, such as refined processing technology, is introduced in this review. Finally, progress of applications of berry functional extracts in the food industry is described in detail; this should encourage further scientific research and industrial utilization.

Combination of High-Pressure Treatment at 500 MPa and Biopreservation with a Lactococcus lactis Strain for Lowering the Bacterial Growth during Storage of Diced Cooked Ham with Reduced Nitrite Salt

We investigated the combined effects of biopreservation and high-pressure treatment on bacterial communities of diced cooked ham prepared with diminished nitrite salt. First, bacterial communities of four commercial brands of diced cooked ham from local supermarkets were characterized and stored frozen. Second, sterile diced cooked ham, prepared with reduced levels of nitrite, was inoculated with two different microbiota collected from the aforementioned commercial samples together with a nisin-producing Lactococcus lactis protective strain able to recover from a 500 MPa high-pressure treatment. Samples were then treated at 500 MPa for 5 min, and bacterial dynamics were monitored during storage at 8 °C. Depending on samples, the ham microbiota was dominated by different Proteobacteria (Pseudomonas, Serratia, Psychrobacter, or Vibrio) or by Firmicutes (Latilactobacillus and Leuconostoc). Applied alone, none of the treatments stabilized during the growth of the ham microbiota. Nevertheless, the combination of biopreservation and high-pressure treatment was efficient in reducing the growth of Proteobacteria spoilage species. However, this effect was dependent on the nature of the initial microbiota, showing that the use of biopreservation and high-pressure treatment, as an alternative to nitrite reduction for ensuring cooked ham microbial safety, merits attention but still requires improvement.

Comparison of the Effect of Hydrostatic and Dynamic High Pressure Processing on the Enzymatic Activity and Physicochemical Quality Attributes of 'Ataulfo' Mango Nectar

The effects of hydrostatic (HHP) and dynamic (HPH) high-pressure treatments on the activity of pectin methylesterase (PME) and polyphenol oxidase (PPO) as well as the physicochemical quality attributes of ‘Ataulfo’ mango nectar were assessed. HHP reduced PME relative activity by 28% at 100 MPa for 5 min but increased PPO activity almost five-fold. Contrarily, HPH did not affect PME activity, but PPO was effectively reduced to 10% of residual activity at 300 MPa and at three passes. Color parameters (CIEL*a*b*), °hue, and chroma were differently affected by each type of high-pressure processing technology. The viscosity and fluid behavior were not affected by HHP, however, HPH changed the apparent viscosity at low dynamic pressure levels (100 MPa with one and three passes). The viscosity decreased at high shear rates in nectar samples, showing a shear-thinning effect. The results highlight how different effects can be achieved with each high-pressure technology; thus, selecting the most appropriate system for processing and preserving liquid foods like fruit beverages is recommended.

Emerging drying techniques for food safety and quality: A review

The new trends in drying technology seek a promising alternative to synthetic preservatives to improve the shelf-life and storage stability of food products. On the other hand, the drying process can result in deformation and degradation of phytoconstituents due to their thermal sensitivity. The main purpose of this review is to give a general overview of common drying techniques with special attention to food industrial applications, focusing on recent advances to maintain the features of the active phytoconstituents and nutrients, and improve their release and storage stability. Furthermore, a drying technique that extends the shelf-life of food products by reducing trapped water, will negatively affect the spoilage of microorganisms and enzymes that are responsible for undesired chemical composition changes, but can protect beneficial microorganisms like probiotics. This paper also explores recent efficient improvements in drying technologies that produce high-quality and low-cost final products compared to conventional methods. However, despite the recent advances in drying technologies, hybrid drying (a combination of different drying techniques) and spray drying (drying with the help of encapsulation methods) are still promising techniques in food industries. In conclusion, spray drying encapsulation can improve the morphology and texture of dry materials, preserve natural components for a long time, and increase storage times (shelf-life). Optimizing a drying technique and using a suitable drying agent should also be a promising solution to preserve probiotic bacteria and antimicrobial compounds.

Effect of the Combination of High Hydrostatic Pressure and Alkaline Electrolyzed Water on the Reduction of Heat Resistance of Bacterial Spores

The effect of combined use of alkaline electrolyzed water （AlEW） on the reduction of heat resistance of bacterial spores by high hydrostatic pressure processing（ HPP） was investigated in this study. No reduction of heat resistance of bacterial spores, which was defined as the spore survival by heat treatment at 80℃ for 15 min, was observed by the treatment of single HPP with 30MPa at 50℃ even for 6 hours. However, a 3-log decrease in the viable bacterial spores was obtained by the combination of AlEW pretreatment with 1 hour of HPP treatment. An additional 2 hours duration of HPP treatment could inactivate more 2 logs of the viable bacterial spores. The obtained D value of bacterial spores treated by HPP was decreased to one-eighth by the pretreatment with AlEW when compared with the control sample. In case of the temperature during HPP treatment was 70℃, bacterial spores did not reduce its heat resistance with lower pressuring levels. In case of the temperature during HPP treatment is high with lower pressure levels, bacterial spores did not reduce its heat resistance even when AlEW was combined as the pretreatment. It was considered that the decrease in heat resistance by AlEW was resulted from the weakening of surface layer of spores by protein dissolution with alkaline substance. No clear effect of high negative redox potential, which is a unique property of AlEW, on the reduction of heat resistance was recognized.

Effect of high hydrostatic pressure on the edible quality, health and safety attributes of plant-based foods represented by cereals and legumes: a review

Consumers today are increasingly willing to reduce their meat consumption and adopt plant-based alternatives in their diet. As a main source of plant-based foods, cereals and legumes (CLs) together could make up for all the essential nutrients that humans consume daily. However, the consumption of CLs and their derivatives is facing many challenges, such as the poor palatability of coarse grains and vegetarian meat, the presence of anti-nutritional factors, and allergenic proteins in CLs, and the vulnerability of plant-based foods to microbial contamination. Recently, high hydrostatic pressure (HHP) technology has been used to tailor the techno-functionality of plant proteins and induce cold gelatinization of starch in CLs to improve the edible quality of plant-based products. The nutritional value (e.g., the bioavailability of vitamins and minerals, reduction of anti-nutritional factors of legume proteins) and bio-functional properties (e.g., production of bioactive peptides, increasing the content of γ-aminobutyric acid) of CLs were significantly improved as affected by HHP. Moreover, the food safety of plant-based products could be significantly improved as well. HHP lowered the risk of microbial contamination through the inactivation of numerous microorganisms, spores, and enzymes in CLs and alleviated the allergy symptoms from consumption of plant-based foods.

Emerging Non-Thermal Technologies for the Extraction of Grape Anthocyanins

Anthocyanins are flavonoid pigments broadly distributed in plants with great potential to be used as food colorants due to their range of colors, innocuous nature, and positive impact on human health. However, these molecules are unstable and affected by pH changes, oxidation and high temperatures, making it very important to extract them using gentle non-thermal technologies. The use of emerging non-thermal techniques such as High Hydrostatic Pressure (HHP), Ultra High Pressure Homogenization (UHPH), Pulsed Electric Fields (PEFs), Ultrasound (US), irradiation, and Pulsed Light (PL) is currently increasing for many applications in food technology. This article reviews their application, features, advantages and drawbacks in the extraction of anthocyanins from grapes. It shows how extraction can be significantly increased with many of these techniques, while decreasing extraction times and maintaining antioxidant capacity.

Effects of Pressure Level and Time Treatment of High Hydrostatic Pressure (HHP) on Inulin Gelation and Properties of Obtained Hydrogels

The aim of this study was the evaluation of the influence of different HHP levels (150 and 300 MPa) and time treatment (5, 10, 20 min) on the gelation and properties of hydrogels with different inulin concentration (15, 20, 25 g/100 g). High-pressure treatment, in tested ranges, induces inulin gels and allows obtaining gel structures even at a lowest tested inulin content (i.e., 15 g/100 g). Selecting the pressure parameters, it is possible to modify the characteristics of the created hydrogels. The use of higher pressure (i.e., 300 MPa) allows to increase the stability of the hydrogels and change their structure to more compressed, which results in higher yield stress, lower spreadability, harder and more adhesive structure. For example, increasing the inulin gelling induction pressure (concentration 20 g/100 g) from 150 to 300 MPa with a time treatment of 10 min resulted in an increase in yield stress from 38.1 to 711.7 Pa, spreadability force from 0.59 to 4.59 N, firmness from 0.11 to 1.46 N, and adhesiveness from −0.06 to −0.65 N. Extending the time treatment of HHP increases this effect, but mainly when higher pressure and a higher concentration of inulin are being used. For example, extension of time treatment at 300 MPa pressure from 5 to 20 min resulted in an increase in yield stress from 774.8 to 1273.8 Pa, spreadability force from 6.28 to 8.43 N, firmness from 1.87 to 2.98 N, and adhesiveness from −0.94 to −1.27 N. The obtained results indicate the possibility of using HHP to create inulin hydrogels tailored to the characteristics in a specific food product.

Innovative hurdle system towards Listeria monocytogenes inactivation in a fermented meat sausage model - high pressure processing assisted by bacteriophage P100 and bacteriocinogenic Pediococcus acidilactici

Consumers' quest for healthier, locally produced foods, renders the demand for these products increasingly prominent. The purpose of the present work was to evaluate the impact of a non-thermal multi-hurdle approach, which associated mild high hydrostatic pressure (HHP, 300 MPa), the bacteriophage Listex™ P100, and the pediocin PA-1 producing Pediococcus acidilactici HA 6111-2, as a novel minimal processing towards Listeria monocytogenes eradication in Alheira (a traditional fermented meat sausage from Northern Portugal). The combination of the three hurdles achieved the USDA-FSIS 5 log reduction (in accordance with the standard guidelines for ready-to-eat foods), being the only treatment to elicit the absence of L. monocytogenes immediately following processing (p < 0.05). The pair association of HHP with Listex™ P100 was unable to eliminate L. monocytogenes, whilst in the HHP-pediocin PA-1 producing P. acidilactici treated samples the eradication was delayed when compared to the three hurdles combination. In addition to the listericidal effect of the HHP-phage-lactic acid bacterium treatment, no significant differences (p > 0.05) in the pH values were observed, and the semi-quantification of the in situ biosynthesized pediocin PA-1 was documented for the first time in a fermented meat sausage model.

High hydrostatic pressure extract of mulberry leaves ameliorates hypercholesterolemia via modulating hepatic microRNA-33 expression and AMPK activity in high cholesterol diet fed rats

Background

Mulberry leaf (Morus alba L.) contains multiple bioactive ingredients and has been used in the treatment of obesity, diabetes, inflammation, and atherosclerosis. High hydrostatic pressure (HHP) processing has been developed for the extraction of bioactive compounds from plants. However, the hypocholesterolemic effect of the HHP extract from mulberry leaves and its underlying mechanism have never been investigated.

Objective

The specific aim of the present study was to investigate the hypocholesterolemic property of a novel extract obtained from mulberry leaves under HHP in rats.

Design

Sprague–Dawley rats were divided into four groups and fed either a normal diet (NOR), a high cholesterol diet containing 1% cholesterol and 0.5% cholic acid (HC), an HC diet containing 0.5% mulberry leaf extract (ML), or a 1% mulberry leaf extract (MH) for 4 weeks.

Results

High hydrostatic pressure extract of mulberry leaves significantly reduced the HC-increased serum levels of triglyceride (TG), cholesterol (TC) and low-density lipoprotein cholesterol (LDL-C), and hepatic contents of TG and TC. The HHP extraction from mulberry leaves also increased the HC-decreased fecal TC and bile acid levels without changing body weight, food intake, liver weight, and serum activities of alanine transaminase (ALT) and aspartate transaminase (AST) (P < 0.05). The mulberry leaf extract significantly enhanced the expression of hepatic genes such as cholesterol 7 alpha-hydroxylase (CYP7A1), liver X receptor alpha (LXRα), and ATP-binding cassette transporters, ABCG5/ABCG8, involved in hepatic bile acid synthesis and cholesterol efflux (P < 0.05). In addition, the HHP extraction of mulberry leaves significantly suppressed hepatic microRNA(miR)-33 expression and increased adenosine monophosphate-activated protein kinase (AMPK) activity.

Conclusion

These results suggest that the HHP extract of mulberry leaves lowers serum cholesterol levels by partially increasing hepatic bile acid synthesis and fecal cholesterol excretion through the modulation of miR-33 expression and AMPK activation in the liver.

Induced Changes in Aroma Compounds of Foods Treated with High Hydrostatic Pressure: A Review

Since conventional thermal processing can have detrimental consequences on aroma compounds, non-thermal technologies such as high hydrostatic pressure (HHP) have been explored. HHP may alter the weak chemical bonds of enzymes. These changes can modify the secondary, tertiary, and quaternary structures of key enzymes in the production of aroma compounds. This can result in either an increase or decrease in their content, along with reactions or physical processes associated with a reduction of molecular volume. This article provides a comprehensive review of HHP treatment's effects on the content of lipid-derived aroma compounds, aldehydes, alcohols, ketones, esters, lactones, terpenes, and phenols, on various food matrices of vegetable and animal origin. The content of aldehydes and ketones in food samples increased when subjected to HHP, while the content of alcohols and phenols decreased, probably due to oxidative processes. Both ester and lactone concentrations appeared to decline due to hydrolysis reactions. There is no clear tendency regarding terpenes concentration when subjected to HHP treatments. Because of the various effects of HHP on aroma compounds, an area of opportunity arises to carry out future studies that allow optimizing and controlling the effect.

Formation of furan in baby food products: Identification and technical challenges

Furan is generally produced during thermal processing of various foods including baked, fried, and roasted food items such as cereal products, coffee, canned, and jarred prepared foods as well as in baby foods. Furan is a toxic and carcinogenic compound to humans and may be a vital hazard to infants and babies. Furan could be formed in foods through thermal degradation of carbohydrates, dissociation of amino acids, and oxidation of polyunsaturated fatty acids. The detection of furan in food products is difficult due to its high volatility and low molecular weight. Headspace solid-phase microextraction coupled with gas chromatography/mass spectrometer (GC/MS) is generally used for analysis of furan in food samples. The risk assessment of furan can be characterized using margin of exposure approach (MOE). Conventional strategies including cooking in open vessels, reheating of commercially processed foods with stirring, and physical removal using vacuum treatment have remained unsuccessful for the removal of furan due to the complex production mechanisms and possible precursors of furan. The innovative food-processing technologies such as high-pressure processing (HPP), high-pressure thermal sterilization (HPTS), and Ohmic heating have been adapted for the reduction of furan levels in baby foods. But in recent years, only HPP has gained interest due to successful reduction of furan because of its nonthermal mechanism. HPP-treated baby food products are commercially available from different food companies. This review summarizes the mechanism involved in the formation of furan in foods, its toxicity, and identification in infant foods and presents a solution for limiting its formation, occurrence, and retention using novel strategies.

Mechanical Characterization of Human Trabecular and Formed Granulate Bone Cylinders Processed by High Hydrostatic Pressure

One main disadvantage of commercially available allogenic bone substitute materials is the altered mechanical behavior due to applied material processing, including sterilization methods like thermal processing or gamma irradiation. The use of high hydrostatic pressure (HHP) might be a gentle alternative to avoid mechanical alteration. Therefore, we compressed ground trabecular human bone to granules and, afterwards, treated them with 250 and 300 MPa for 20 and 30 min respectively. We characterized the formed bone granule cylinders (BGC) with respect to their biomechanical properties by evaluating stiffness and stress at 15% strain. Furthermore, the stiffness and yield strength of HHP-treated and native human trabecular bone cylinders (TBC) as control were evaluated. The mechanical properties of native vs. HHP-treated TBCs as well as HHP-treated vs. untreated BGCs did not differ, independent of the applied HHP magnitude and duration. Our study suggests HHP treatment as a suitable alternative to current processing techniques for allogenic bone substitutes since no negative effects on mechanical properties occurred.