Nanoparticle exposures from nano-enabled toner-based printing equipment and human health: state of science and future research needs

Cardiovascular toxic effects of nanoparticles and corresponding molecular mechanisms

Rapid advancements in nanotechnology have been integrated into various disciplines, leading to an increased prevalence of nanoparticle exposure. The widespread utilization of nanomaterials and heightened levels of particulate pollution have prompted government departments to intensify their focus on assessing the safety of nanoparticles (NPs). The cardiovascular system, crucial for maintaining human health, has emerged as vulnerable to damage from nanoparticle exposure. A mounting body of evidence indicates that interactions can occur when NPs come into contact with components of the cardiovascular system, contributing to adverse cardiovascular disease (CVD). However, the underlying molecular mechanisms driving these events remain elusive. This work provides a comprehensive review of recent advance on nanoparticle-induced adverse cardiovascular events and offers insight into the associated molecular mechanisms. Finally, the influencing factors of NPs-induced cardiovascular toxicity are discussed.

In Vivo Tissue Distribution of Polystyrene or Mixed Polymer Microspheres and Metabolomic Analysis after Oral Exposure in Mice

BACKGROUND

Global plastic use has consistently increased over the past century with several different types of plastics now being produced. Much of these plastics end up in oceans or landfills leading to a substantial accumulation of plastics in the environment. Plastic debris slowly degrades into microplastics (MPs) that can ultimately be inhaled or ingested by both animals and humans. A growing body of evidence indicates that MPs can cross the gut barrier and enter into the lymphatic and systemic circulation leading to accumulation in tissues such as the lungs, liver, kidney, and brain. The impacts of mixed MPs exposure on tissue function through metabolism remains largely unexplored.

OBJECTIVES

This study aims to investigate the impacts of polymer microspheres on tissue metabolism in mice by assessing the microspheres ability to translocate across the gut barrier and enter into systemic circulation. Specifically, we wanted to examine microsphere accumulation in different organ systems, identify concentration-dependent metabolic changes, and evaluate the effects of mixed microsphere exposures on health outcomes.

METHODS

To investigate the impact of ingested microspheres on target metabolic pathways, mice were exposed to either polystyrene (5 μ m ) microspheres or a mixture of polymer microspheres consisting of polystyrene (5 μ m ), polyethylene (1 - 4 μ m ), and the biodegradability and biocompatible plastic, poly-(lactic-co-glycolic acid) (5 μ m ). Exposures were performed twice a week for 4 weeks at a concentration of either 0, 2, or 4 mg / week via oral gastric gavage. Tissues were collected to examine microsphere ingress and changes in metabolites.

RESULTS

In mice that ingested microspheres, we detected polystyrene microspheres in distant tissues including the brain, liver, and kidney. Additionally, we report on the metabolic differences that occurred in the colon, liver, and brain, which showed differential responses that were dependent on concentration and type of microsphere exposure.

DISCUSSION

This study uses a mouse model to provide critical insight into the potential health implications of the pervasive issue of plastic pollution. These findings demonstrate that orally consumed polystyrene or mixed polymer microspheres can accumulate in tissues such as the brain, liver, and kidney. Furthermore, this study highlights concentration-dependent and polymer type-specific metabolic changes in the colon, liver, and brain after plastic microsphere exposure. These results underline the mobility within and between biological tissues of MPs after exposure and emphasize the importance of understanding their metabolic impact. https://doi.org/10.1289/EHP13435.

3D Airway Epithelial-Fibroblast Biomimetic Microfluidic Platform to Unravel Engineered Nanoparticle-Induced Acute Stress Responses as Exposome Determinants

Insights into how biological systems respond to high- and low-dose acute environmental stressors are a fundamental aspect of exposome research. However, studying the impact of low-level environmental exposure in conventional in vitro settings is challenging. This study employed a three-dimensional (3D) biomimetic microfluidic lung-on-chip (μLOC) platform and RNA-sequencing to examine the effects of two model anthropogenic engineered nanoparticles (NPs): zinc oxide nanoparticles (Nano-ZnO) and copier center nanoparticles (Nano-CCP). The airway epithelium exposed to these NPs exhibited dose-dependent increases in cytotoxicity and barrier dysregulation (dominance of the external exposome). Interestingly, even nontoxic and low-level exposure (10 μg/mL) of the epithelium compartment to Nano-ZnO triggered chemotaxis of lung fibroblasts toward the epithelium. An increase in α smooth muscle actin (α-SMA) expression and contractile activity was also observed in these cells, indicating a bystander-like adaptive response (dominance of internal exposome). Further bioinformatics and network analysis showed that a low-dose Nano-ZnO significantly induced a robust transcriptomic response and upregulated several hub genes associated with the development of lung fibrosis. We propose that Nano-ZnO, even at a no observable effect level (NOEL) dose according to conventional standards, can function as a potent nanostressor to disrupt airway epithelium homeostasis. This leads to a cascade of profibrotic events in a cross-tissue compartment fashion. Our findings offer new insights into the early acute events of respiratory harm associated with environmental NPs exposure, paving the way for better exposomic understanding of this emerging class of anthropogenic nanopollutants.

Effect biomarkers of nanoparticle-exposed workers: A scoping review

The widespread and increasing use of engineered nanomaterials (i.e., particulate materials measuring 1-100 nanometers (nm) in at least one dimension) poses a potential health and safety risk to exposed workers. The unique properties of nanomaterials have made nanomaterials useful in multiple industries. However, their production and use may compromise worker health, presenting an emerging occupational health hazard, the acute and chronic effects of which have not been fully assessed. In this scoping review, we critically assess the literature on biomarkers of effect from nanoparticles and discuss the utility of biomonitoring as a means of assessing the physiological effects of nanoparticle exposure among nanotechnology workers. Multiple databases were queried based on select inclusion and exclusion criteria according to PRISMA guidelines, and articles were independently screened by two topic experts. Of 286 articles initially retrieved, 28 were included after screening and eligibility. The reviewed articles indicated that sensitive effect biomarkers could reflect early health effects of exposure to nanoparticles in the workplace and may be useful for monitoring toxicological effects and associated risks.

Micro- and nanoplastics (MNPs) and their potential toxicological outcomes: State of science, knowledge gaps and research needs

Plastic waste has been produced at a rapidly growing rate over the past several decades. The environmental impacts of plastic waste on marine and terrestrial ecosystems have been recognized for years. Recently, researchers found that micro- and nanoplastics (MNPs), micron (100 nm - 5 mm) and nanometer (1 - 100 nm) scale particles and fibers produced by degradation and fragmentation of plastic waste in the environment, have become an important emerging environmental and food chain contaminant with uncertain consequences for human health. This review provides a comprehensive summary of recent findings from studies of potential toxicity and adverse health impacts of MNPs in terrestrial mammals, including studies in both in vitro cellular and in vivo mammalian models. Also reviewed here are recently released biomonitoring studies that have characterized the bioaccumulation, biodistribution, and excretion of MNPs in humans. The majority MNPs in the environment to which humans are most likely to be exposed, are of irregular shapes, varied sizes, and mixed compositions, and are defined as secondary MNPs. However, the MNPs used in most toxicity studies to date were commercially available primary MNPs of polystyrene (PS), polyethylene (PE), polyvinyl chloride (PVC), polyethylene terephthalate (PET), and other polymers. The emerging in vitro and in vivo evidence reviewed here suggests that MNP toxicity and bioactivity are largely determined by MNP particle physico-chemical characteristics, including size, shape, polymer type, and surface properties. For human exposure, MNPs have been identified in human blood, urine, feces, and placenta, which pose potential health risks. The evidence to date suggests that the mechanisms underlying MNP toxicity at the cellular level are primarily driven by oxidative stress. Nonetheless, large knowledge gaps in our understanding of MNP toxicity and the potential health impacts of MNP exposures still exist and much further study is needed to bridge those gaps. This includes human population exposure studies to determine the environmentally relevant MNP polymers and exposure concentrations and durations for toxicity studies, as well as toxicity studies employing environmentally relevant MNPs, with surface chemistries and other physico-chemical properties consistent with MNP particles in the environment. It is especially important to obtain comprehensive toxicological data for these MNPs to understand the range and extent of potential adverse impacts of microplastic pollutants on humans and other organisms.

A field investigation into the characteristics and formation mechanisms of particles during the operation of laser printers and photocopiers

Indoor particle release from toner printing equipment (TPE) is a major health concern and has received wide attention. In this study, nine printing centers were randomly selected and three working phases were simulated, namely, non-working, normal printing/copying, and heavy printing/copying. The dynamics of the ozone (O₃), volatile organic compound (VOC), and particle emissions from TPE were determined by portable detectors. Results showed that particles, VOCs, and O₃ were indeed discharged, and particles and VOCs concentrations remained at high levels. Among them, 44% of the rooms represented high-level particle releases. Submicrometer-sized particles, especially nanoparticles, were positively correlated with VOCs, but were inversely proportional to the O₃ concentration. Four elements, Ca, Al, Mg and Ni, were usually present in nanoparticles because of the discharge of paper. Si, Al, K, Ni and Pb were found in the submicrometer-sized particles and were consistent with the toner composition. The potential particle precursors were identified, which suggested that styrene was the most likely secondary organic aerosol (SOA) precursor. Overall, the use of the toner formulation and the discharge of paper attribute to the TPE-emitted particles, in which styrene is a specific monitoring indicator for the formation of SOA.

Integrating structure annotation and machine learning approaches to develop graphene toxicity models

Modern nanotechnology provides efficient and cost-effective nanomaterials (NMs). The increasing usage of NMs arises great concerns regarding nanotoxicity in humans. Traditional animal testing of nanotoxicity is expensive and time-consuming. Modeling studies using machine learning (ML) approaches are promising alternatives to direct evaluation of nanotoxicity based on nanostructure features. However, NMs, including two-dimensional nanomaterials (2DNMs) such as graphenes, have complex structures making them difficult to annotate and quantify the nanostructures for modeling purposes. To address this issue, we constructed a virtual graphenes library using nanostructure annotation techniques. The irregular graphene structures were generated by modifying virtual nanosheets. The nanostructures were digitalized from the annotated graphenes. Based on the annotated nanostructures, geometrical nanodescriptors were computed using Delaunay tessellation approach for ML modeling. The partial least square regression (PLSR) models for the graphenes were built and validated using a leave-one-out cross-validation (LOOCV) procedure. The resulted models showed good predictivity in four toxicity-related endpoints with the coefficient of determination (R2) ranging from 0.558 to 0.822. This study provides a novel nanostructure annotation strategy that can be applied to generate high-quality nanodescriptors for ML model developments, which can be widely applied to nanoinformatics studies of graphenes and other NMs.

Aerosol physicochemical determinants of carbon black and ozone inhalation co-exposure induced pulmonary toxicity

Air pollution accounts for more than 7 million premature deaths worldwide. Using ultrafine carbon black (CB) and ozone (O3) as a model for an environmental co-exposure scenario, the dose response relationships in acute pulmonary injury and inflammation were determined by generating, characterizing, and comparing stable concentrations of CB aerosols (2.5, 5.0, 10.0 mg/m3), O3 (0.5, 1.0, 2.0 ppm) with mixture CB + O3 (2.5 + 0.5, 5.0 + 1.0, 10.0 + 2.0). C57BL6 male mice were exposed for 3 h by whole body inhalation and acute toxicity determined after 24 h. CB itself did not cause any alteration, however, a dose response in pulmonary injury/inflammation was observed with O3 and CB + O3. This increase in response with mixtures was not dependent on the uptake but was due to enhanced reactivity of the particles. Benchmark dose modeling showed several-fold increase in potency with CB + O3 compared with CB or O3 alone. Principal component analysis provided insight into response relationships between various doses and treatments. There was a significant correlation in lung responses with charge-based size distribution, total/alveolar deposition, oxidant generation, and antioxidant depletion potential. Lung tissue gene/protein response demonstrated distinct patterns that are better predicted by either particle dose/aerosol responses (interleukin-1β, keratinocyte chemoattractant, transforming growth factor beta) or particle reactivity (thymic stromal lymphopoietin, interleukin-13, interleukin-6). Hierarchical clustering showed a distinct signature with high dose and a similarity in mRNA expression pattern of low and medium doses of CB + O3. In conclusion, we demonstrate that the biological outcomes from CB + O3 co-exposure are significantly greater than individual exposures over a range of aerosol concentrations and aerosol characteristics can predict biological outcome.

Biomarkers of oxidative stress in urine and plasma of operators at six Singapore printing centers and their association with several metrics of printer-emitted nanoparticle exposures

Inhalation of nanoparticles emitted from toner-based printing equipment (TPE), such as laser printers and photocopiers, also known as PEPs, has been associated with systemic inflammation, hypertension, cardiovascular disease, respiratory disorders, and genotoxicity. Global serum metabolomics analysis in 19 healthy TPE operators found 52 dysregulated biomolecules involved in upregulation of inflammation, immune, and antioxidant responses and downregulation of cellular energetics and cell proliferation. Here, we build on the metabolomics study by investigating the association of a panel of nine urinary OS biomarkers reflecting DNA/RNA damage (8OHdG, 8OHG, and 5OHMeU), protein/amino acid oxidation (o-tyrosine, 3-chlorotyrosine, and 3-nitrotyrosine), and lipid oxidation (8-isoprostane, 4-hydroxy nonenal, and malondialdehyde [MDA]), as well as plasma total MDA and total protein carbonyl (TPC), with several nanoparticle exposure metrics in the same 19 healthy TPE operators. Plasma total MDA, urinary 5OHMeU, 3-chlorotyrosine, and 3-nitrotyrosine were positively, whereas o-tyrosine inversely and statistically significantly associated with PEPs exposure in multivariate models, after adjusting for age and urinary creatinine. Urinary 8OHdG, 8OHG, 5OHMeU, and total MDA in urine and plasma had group mean values higher than expected in healthy controls without PEPs exposure and comparable to those of workers experiencing low to moderate levels of oxidative stress (OS). The highest exposure group had OS biomarker values, most notably 8OHdG, 8OHG, and total MDA, that compared to workers exposed to welding fumes and titanium dioxide. Particle number concentration was the most sensitive and robust exposure metric. A combination of nanoparticle number concentration and OS potential of fresh aerosols is recommended for larger scale future studies.

Incineration-Generated Polyethylene Micro-Nanoplastics Increase Triglyceride Lipolysis and Absorption in an In Vitro Small Intestinal Epithelium Model

Despite mounting evidence of micro-nanoplastics (MNPs) in food and drinking water, little is known of the potential health risks of ingested MNPs, and nothing is known of their potential impact on nutrient digestion and absorption. We assessed the effects of environmentally relevant secondary MNPs generated by incineration of polyethylene (PE-I), on digestion and absorption of fat in a high fat food model using a 3-phase in vitro simulated digestion coupled with a tri-culture small intestinal epithelium model. The presence of 400 μg/mL PE-I increased fat digestion by 33% and increased fat absorption by 147 and 145% 1 and 2 h after exposure. Analysis of the PE-I lipid corona during digestion revealed predominantly triacylglycerols with enrichment of fatty acids in the small intestinal phase. Protein corona analysis showed enrichment of triacylglycerol lipase and depletion of β-casein in the small intestinal phase. These findings suggest digestion of triacylglycerol by lipase on the surface of lipid-coated MNPs as a potential mechanism. Further studies are needed to investigate the mechanisms underlying the greater observed increase in fat absorption, to verify these results in an animal model, and to determine the MNP properties governing their effects on lipid digestion and absorption.

Association of nanoparticle exposure with serum metabolic disorders of healthy adults in printing centers

Printers are everyday devices in both our homes and workplaces. We have previously found high occupational exposure levels to toner-based printer emitted nanoparticles (PEPs) at printing centers. To elucidate the potential health effects from exposure to PEPs, a total of 124 human serum samples were collected from 32 workers in the printing centers during the repeated follow-up measurements, and global serum metabolomics were analyzed in three ways: correlation between metabolic response and personal exposure (dose response exposure); metabolite response changes between Monday and Friday of a work week (short-term exposure), and metabolite response in relation to length of service in a center (long-term exposure). A total of 52 key metabolites changed significantly in relation to nanoparticle exposure levels. The primary dysregulated pathways included inflammation and immunity related arginine and tryptophan metabolism. Besides, some distinct metabolite expression patterns were found to occur during the transition from short-term to long-term exposures, suggesting cumulative effect of PEPs exposure. These findings, for the first time, highlight the inhalation exposure responses to printer emitted nanoparticles at the metabolite level, potentially serving as pre-requisites for whole organism and population responses, and are inline with emerging findings on potential health effects.

A holistic modeling framework for estimating the influence of climate change on indoor air quality

The IPCC 2021 report predicts rising global temperatures and more frequent extreme weather events in the future, which will have different effects on the regional climate and concentrations of ambient air pollutants. Consequently, changes in heat and mass transfer between the inside and outside of buildings will also have an increasing impact on indoor air quality. It is therefore surprising that indoor spaces and occupant well-being still play a subordinate role in the studies of climate change. To increase awareness for this topic, the Indoor Air Quality Climate Change (IAQCC) model system was developed, which allows short and long-term predictions of the indoor climate with respect to outdoor conditions. The IAQCC is a holistic model that combines different scenarios in the form of submodels: building physics, indoor emissions, chemical-physical reaction and transformation, mold growth, and indoor exposure. IAQCC allows simulation of indoor gas and particle concentrations with outdoor influences, indoor materials and activity emissions, particle deposition and coagulation, gas reactions, and SVOC partitioning. These key processes are fundamentally linked to temperature and relative humidity. With the aid of the building physics model, the indoor temperature and humidity, and pollutant transport in building zones can be simulated. The exposure model refers to the calculated concentrations and provides evaluations of indoor thermal comfort and exposure to gaseous, particulate, and microbial pollutants.

Elevated Urinary Biomarkers of Oxidative Damage in Photocopier Operators following Acute and Chronic Exposures

Inhalation exposures to nanoparticles (NPs) from printers and photocopiers have been associated with upper airway and systemic inflammation, increased blood pressure, and cases of autoimmune and respiratory disorders. In this study we investigate oxidative stress induced by exposures to copier-emitted nanoparticles using a panel of urinary oxidative stress (OS) biomarkers representing DNA damage (8-hydroxydeoxyguanosine, 8-OHdG; 8-hydroxyguanosine, 8-OHG; 5-hydroxymethyl uracil 5-OHMeU), lipid peroxidation (8-isoprostane; 4-hydroxynonenal, HNE), and protein oxidation biomarkers (o-tyrosine, 3-chlorotyrosine, and 3-nitrotyrosine) under conditions of acute (single 6 h exposure, 9 volunteers, 110 urine samples) and chronic exposures (6 workers, 11 controls, 81 urine samples). Urinary biomarkers were quantified with liquid chromatography–tandem mass spectrometry after solid phase extraction sample cleanup. 8-OHdG, 8-OHG, 8-isoprostane, and HNE were significantly elevated in both the acute and chronic exposure study participants relative to the controls. In the acute exposure study, the geometric mean ratios post-/pre-exposure were 1.42, 1.10, 2.0, and 2.25, respectively. Urinary 8-OHG and HNE increased with time to at least 36 h post-exposure (post-/pre-exposure GM ratios increased to 3.94 and 2.33, respectively), suggesting slower generation and/or urinary excretion kinetics for these biomarkers. In chronically exposed operators, the GM ratios of urinary biomarkers relative to controls ranged from 1.52 to 2.94, depending on the biomarker. O-Tyrosine and 5-OHMeU biomarkers were not significantly different from the controls. 3-chlorotyrosine and 3-nitrotyrosine were not detected in the urine samples. We conclude that NPs from photocopiers induce systemic oxidative stress by damaging DNA, RNA, and lipids. Urinary levels of 8-OHdG, 8-OHG, HNE, and 8-isoprostane were orders of magnitude higher than in nanocomposite processing workers, comparable to nano titanium dioxide and fiberglass manufacturing workers, but much lower than in shipyard welding and carbon nanotube synthesis workers. Biomarkers 8-OHdG, 8-OHG, 8-isoprostane, and HNE appear to be more sensitive and robust urinary biomarkers for monitoring oxidative stress to NPs from photocopiers.

Release of particulate matter from nano-enabled building materials (NEBMs) across their lifecycle: Potential occupational health and safety implications

The present study investigates potential nanomaterial releases and occupational health risks across the lifecycle of nano-enabled building materials (NEBMs), namely, insulations and coatings. We utilized real-world degradation scenarios of a) sanding (mechanical), b) incineration (thermal), and c) accelerated UV-aging (environmental) followed by incineration. Extensive physicochemical characterization of the released lifecycle particulate matter (LCPM) was performed. The LCPM2.5 aerosol size fraction was used to assess the acute biological, cytotoxic and inflammatory effects on Calu-3 human lung epithelial cells. RNA-Seq analysis of exposed cells was performed to assess potential for systemic disease. Findings indicated that release dynamics and characteristics of LCPM depended on both the NEBM composition and the degradation scenario(s). Incineration emitted a much higher nanoparticle number concentration than sanding (nearly 4 orders of magnitude), which did not change with prior UV-aging. Released nanofillers during sanding were largely part of the matrix fragments, whereas those during incineration were likely physicochemically transformed. The LCPM from incineration showed higher bioactivity and inflammogenicity compared to sanding or sequential UV-aging and incineration, and more so when metallic nanofillers were present (such as Fe2O3). Overall, the study highlights the need for considering real-world exposure and toxicological data across the NEBM lifecycle to perform adequate risk assessments and to ensure workplace health and safety.

Printer center nanoparticles alter the DNA repair capacity of human bronchial airway epithelial cells

Nano-enabled, toner-based printing equipment emit nanoparticles during operation. The bioactivity of these nanoparticles as documented in a plethora of published toxicological studies raises concerns about their potential health effects. These include pro-inflammatory effects that can lead to adverse epigenetic alterations and cardiovascular disorders in rats. At the same time, their potential to alter DNA repair pathways at realistic doses remains unclear. In this study, size-fractionated, airborne particles from a printer center in Singapore were sampled and characterized. The PM_0.1 size fraction (particles with an aerodynamic diameter less than 100 nm) of printer center particles (PCP) were then administered to human lung adenocarcinoma (Calu-3) or lymphoblastoid (TK6) cells. We evaluated plasma membrane integrity, mitochondrial activity, and intracellular reactive oxygen species (ROS) generation. Moreover, we quantified DNA damage and alterations in the cells' capacity to repair 6 distinct types of DNA lesions. Results show that PCP altered the ability of Calu-3 cells to repair 8oxoG:C lesions and perform nucleotide excision repair, in the absence of acute cytotoxicity or DNA damage. Alterations in DNA repair capacity have been correlated with the risk of various diseases, including cancer, therefore further genotoxicity studies are needed to assess the potential risks of PCP exposure, at both occupational settings and at the end-consumer level.

Transcriptomics of single dose and repeated carbon black and ozone inhalation co-exposure highlight progressive pulmonary mitochondrial dysfunction

BACKGROUND

Air pollution is a complex mixture of particles and gases, yet current regulations are based on single toxicant levels failing to consider potential interactive outcomes of co-exposures. We examined transcriptomic changes after inhalation co-exposure to a particulate and a gaseous component of air pollution and hypothesized that co-exposure would induce significantly greater impairments to mitochondrial bioenergetics. A whole-body inhalation exposure to ultrafine carbon black (CB), and ozone (O3) was performed, and the impact of single and multiple exposures was studied at relevant deposition levels. C57BL/6 mice were exposed to CB (10 mg/m3) and/or O3 (2 ppm) for 3 h (either a single exposure or four independent exposures). RNA was isolated from lungs and mRNA sequencing performed using the Illumina HiSeq. Lung pathology was evaluated by histology and immunohistochemistry. Electron transport chain (ETC) activities, electron flow, hydrogen peroxide production, and ATP content were assessed.

RESULTS

Compared to individual exposure groups, co-exposure induced significantly greater neutrophils and protein levels in broncho-alveolar lavage fluid as well as a significant increase in mRNA expression of oxidative stress and inflammation related genes. Similarly, a significant increase in hydrogen peroxide production was observed after co-exposure. After single and four exposures, co-exposure revealed a greater number of differentially expressed genes (2251 and 4072, respectively). Of these genes, 1188 (single exposure) and 2061 (four exposures) were uniquely differentially expressed, with 35 mitochondrial ETC mRNA transcripts significantly impacted after four exposures. Both O3 and co-exposure treatment significantly reduced ETC maximal activity for complexes I (- 39.3% and - 36.2%, respectively) and IV (- 55.1% and - 57.1%, respectively). Only co-exposure reduced ATP Synthase activity (- 35.7%) and total ATP content (30%). Further, the ability for ATP Synthase to function is limited by reduced electron flow (- 25%) and translation of subunits, such as ATP5F1, following co-exposure.

CONCLUSIONS

CB and O3 co-exposure cause unique transcriptomic changes in the lungs that are characterized by functional deficits to mitochondrial bioenergetics. Alterations to ATP Synthase function and mitochondrial electron flow underly a pathological adaptation to lung injury induced by co-exposure.

Oxidized carbon black nanoparticles induce endothelial damage through C-X-C chemokine receptor 3-mediated pathway

Oxidation of engineered nanomaterials during application in various industrial sectors can alter their toxicity. Oxidized nanomaterials also have widespread industrial and biomedical applications. In this study, we evaluated the cardiopulmonary hazard posed by these nanomaterials using oxidized carbon black (CB) nanoparticles (CBox) as a model particle. Particle surface chemistry was characterized by X-ray photo electron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR). Colloidal characterization and in vitro dosimetry modeling (particle kinetics, fate and transport modeling) were performed. Lung inflammation was assessed following oropharyngeal aspiration of CB or oxidized CBox particles (20 μg per mouse) in C57BL/6J mice. Toxicity and functional assays were also performed on murine macrophage (RAW 264.7) and endothelial cell lines (C166) with and without pharmacological inhibitors. Oxidant generation was assessed by electron paramagnetic resonance spectroscopy (EPR) and via flow cytometry. Endothelial toxicity was evaluated by quantifying pro-inflammatory mRNA expression, monolayer permeability, and wound closure. XPS and FTIR spectra indicated surface modifications, the appearance of new functionalities, and greater oxidative potential (both acellular and in vitro) of CBox particles. Treatment with CBox demonstrated greater in vivo inflammatory potentials (lavage neutrophil counts, secreted cytokine, and lung tissue mRNA expression) and air-blood barrier disruption (lavage proteins). Oxidant-dependent pro-inflammatory signaling in macrophages led to the production of CXCR3 ligands (CXCL9,10,11). Conditioned medium from CBox-treated macrophages induced significant elevation in endothelial cell pro-inflammatory mRNA expression, enhanced monolayer permeability and impairment of scratch healing in CXCR3 dependent manner. In summary, this study mechanistically demonstrated an increased biological potency of CBox particles and established the role of macrophage-released chemical mediators in endothelial damage.

Biotransformations and cytotoxicity of eleven graphene and inorganic two-dimensional nanomaterials using simulated digestions coupled with a triculture in vitro model of the human gastrointestinal epithelium

Background

Engineered nanomaterials (ENMs) have already made their way into myriad applications and products across multiple industries. However, the potential health risks of exposure to ENMs remain poorly understood. This is particularly true for the emerging class of ENMs know as 2-dimensional nanomaterials (2DNMs), with a thickness of one or a few layers of atoms arranged in a planar structure.

Methods

The present study assesses the biotransformations and in vitro cytotoxicity in the gastrointestinal tract of 11 2DNMs, namely graphene, graphene oxide (GO), partially reduced graphene oxide (prGO), reduced graphene oxide (rGO), hexagonal boron nitride (h-BN), molybdenum disulphide (MoS2), and tungsten disulphide (WS2). The evaluated pristine materials were either readily dispersed in water or dispersed with the use of a surfactant (Na-cholate or PF108). Materials dispersed in a fasting food model (FFM, water) were subjected to simulated 3-phase (oral, gastric, and small intestinal) digestion to replicate the biotransformations that would occur in the GIT after ingestion. A triculture model of small intestinal epithelium was used to assess the effects of the digested products (digestas) on epithelial layer integrity, cytotoxicity, viability, oxidative stress, and initiation of apoptosis.

Results

Physicochemical characterization of the 2DNMs in FFM dispersions and in small intestinal digestas revealed significant agglomeration by all materials during digestion, most prominently by graphene, which was likely caused by interactions with digestive proteins. Also, MoS2 had dissolved by ~75% by the end of simulated digestion. Other than a low but statistically significant increase in cytotoxicity observed with all inorganic materials and graphene dispersed in PF108, no adverse effects were observed in the exposed tricultures.

Conclusions

Our results suggest that occasional ingestion of small quantities of 2DNMs may not be highly cytotoxic in a physiologically relevant in vitro model of the intestinal epithelium. Still, their inflammatory or genotoxic potential after short- or long-term ingestion remains unclear and needs to be studied in future in vitro and in vivo studies. These would include studies of effects on co-ingested nutrient digestion and absorption, which have been documented for numerous ingested ENMs, as well as effects on the gut microbiome, which can have important health implications.

Challenges and Emerging Trends in Toner Waste Recycling: A Review

Toner waste is one of the major electronic waste materials posing serious environmental threat and health hazards. Globally, only about 20–30% of toner waste is recycled, while the remaining percentage is dumped in landfills. Recycling options are limited due to the desirably engineered durability of toners, ascribed to a complicated composition of chemicals, carbon black, and plastic particles, which in turn creates critical challenges in recycling. The World Health Organization has classified toner waste as class 2B carcinogen due to its potential health hazard. In this review, the existing challenges in toner waste recycling are discussed from the perspective of environmental, health, and feasibility aspects. In parallel, the challenges have been opening up alternative strategies to recycle toner wastes. Emerging trends in toner waste recycling include transformation of toner waste into value-added products, utilization as raw material for nanomaterial synthesis, generation of composite electrodes for power generation/storage devices, integration into construction materials, and development of microwave absorbing composites. Considering the enormous volume of toner waste generated globally every year, better recycling and transformation strategies are needed immediately. A circular economy could be established in the future by transforming the enormous toner waste into a resource for other applications. For an effective management of toner waste in the future, an integrated approach involving policies and legislations, infrastructure for collection and treatment, and financial planning among the stakeholders is needed in addition to technological innovations.

Heart healthy cities: genetics loads the gun but the environment pulls the trigger

The world's population is estimated to reach 10 billion by 2050 and 75% of this population will live in cities. Two-third of the European population already live in urban areas and this proportion continues to grow. Between 60% and 80% of the global energy use is consumed by urban areas, with 70% of the greenhouse gas emissions produced within urban areas. The World Health Organization states that city planning is now recognized as a critical part of a comprehensive solution to tackle adverse health outcomes. In the present review, we address non-communicable diseases with a focus on cardiovascular disease and the urbanization process in relation to environmental risk exposures including noise, air pollution, temperature, and outdoor light. The present review reports why heat islands develop in urban areas, and how greening of cities can improve public health, and address climate concerns, sustainability, and liveability. In addition, we discuss urban planning, transport interventions, and novel technologies to assess external environmental exposures, e.g. using digital technologies, to promote heart healthy cities in the future. Lastly, we highlight new paradigms of integrative thinking such as the exposome and planetary health, challenging the one-exposure-one-health-outcome association and expand our understanding of the totality of human environmental exposures.

Ambient PM2.5 species and ultrafine particle exposure and their differential metabolomic signatures

BACKGROUND

The metabolomic signatures of short- and long-term exposure to PM_2.5 have been reported and linked to inflammation and oxidative stress. However, little is known about the relative contribution of the specific PM_2.5 species (hence sources) that drive these metabolomic signatures.

OBJECTIVES

We aimed to determine the relative contribution of the different species of PM_2.5 exposure to the perturbed metabolic pathways related to changes in the plasma metabolome.

METHODS

We performed mass-spectrometry based metabolomic profiling of plasma samples among men from the Normative Aging Study to identify metabolic pathways associated with PM_2.5 species. The exposure windows included short-term (one, seven-, and thirty-day moving average) and long-term (one year moving average). We used linear mixed-effect regression with subject-specific intercepts while simultaneously adjusting for PM_2.5, NO₂, O₃, temperature, relative humidity, and covariates and correcting for multiple testing. We also used independent component analysis (ICA) to examine the relative contribution of patterns of PM_2.5 species.

RESULTS

Between 2000 and 2016, 456 men provided 648 blood samples, in which 1158 metabolites were quantified. We chose 305 metabolites for the short-term and 288 metabolites for the long-term exposure in this analysis that were significantly associated (p-value < 0.01) with PM_2.5 to include in our PM_2.5 species analysis. On average, men were 75.0 years old and their body mass index was 27.7 kg/m². Only 3% were current smokers. In the adjusted models, ultrafine particles (UFPs) were the most significant species of short-term PM_2.5 exposure followed by nickel, vanadium, potassium, silicon, and aluminum. Black carbon, vanadium, zinc, nickel, iron, copper, and selenium were the significant species of long-term PM_2.5 exposure. We identified several metabolic pathways perturbed with PM_2.5 species including glycerophospholipid, sphingolipid, and glutathione. These pathways are involved in inflammation, oxidative stress, immunity, and nucleic acid damage and repair. Results were overlapped with the ICA.

CONCLUSIONS

We identified several significant perturbed plasma metabolites and metabolic pathways associated with exposure to PM_2.5 species. These species are associated with traffic, fuel oil, and wood smoke. This is the largest study to report a metabolomic signature of PM_2.5 species' exposure and the first to use ICA.

Release and cytotoxicity screening of the printer emissions of a CdTe quantum dots-based fluorescent ink

The fluorescent properties of cadmium telluride (CdTe) containing quantum dots (QDs) have led to novel products and applications in the ink and pigment industry. The toxic effects of the emissions associated to the use of printing ink containing CdTe QDs might differ from those of conventional formulations which do not integrate nanoparticles, as CdTe QDs might be emitted. Within this work, the airborne emissions of a water-soluble fluorescent ink containing polyethylene glycol (PEG)-coated CdTe QDs of 3-5 nm diameter have been characterized and studied under controlled conditions during household inkjet printing in a scenario simulating the use phase. Subsequently, the cytotoxicological potential of atomized CdTe QDs ink in an acute exposure regimen simulating an accidental, worse-case scenario has been evaluated in vitro at the air-liquid interface (ALI) using the pulmonary cell line BEAS-2B. Endpoints screened included cell viability, oxidative stress and inflammatory effects. We have observed that CdTe QDs ink at 54.7 ng/mL decreased cell viability by 25.6 % when compared with clean air after 1h of exposure; a concentration about 65 times higher was needed to observe a similar effect in submerged conditions. However, we did not observe oxidative stress or inflammatory effects. The present study integrates the development of scenarios simulating the use phase of nano-additivated inks and the direct cell exposure for in vitro effects assessment, thus implementing a life-cycle oriented approach in the assessment of the toxicity of CdTe QDs.

Identification and visualisation of microplastics / nanoplastics by Raman imaging (iii): algorithm to cross-check multi-images

We recently developed the Raman mapping image to visualise and identify microplastics / nanoplastics (Fang et al. 2020, Sobhani et al. 2020). However, when the Raman signal is low and weak, the mapping uncertainty from the individual Raman peak intensity increases and may lead to images with false positive or negative features. For real samples, even the Raman signal is high, a low signal-noise ratio still occurs and leads to the mapping uncertainty due to the high spectrum background when: the target plastic is dispersed within another material with interfering Raman peaks; materials are present that exhibit broad Raman peaks; or, materials are present that fluoresce when exposed to the excitation laser. In this study, in order to increase the mapping certainty, we advance the algorithm to combine and merge multi-images that have been simultaneously mapped at the different characteristic peaks from the Raman spectra, akin imaging via different mapping channels simultaneously. These multi-images are merged into one image via algorithms, including colour off-setting to collect signal with a higher ratio of signal-noise, logic-OR to pick up more signal, logic-AND to eliminate noise, and logic-SUBTRACT to remove image background. Specifically, two or more Raman images can act as "parent images", to merge and generate a "daughter image" via a selected algorithm, to a "granddaughter image" via a further selected algorithm, and to an "offspring image" etc. More interestingly, to validate this algorithm approach, we analyse microplastics / nanoplastics that might be generated by a laser printer in our office or home. Depending on the toner and the printer, we might print and generate millions of microplastics and nanoplastics when we print a single A4 document.

Chronic upper airway and systemic inflammation from copier emitted particles in healthy operators at six Singaporean workplaces

Toner-based printing equipment (TPE), including laser printers and photocopiers, utilize several engineered nanomaterials (ENMs) to improve toner performance. Operation of TPE, which rarely employ any exposure controls, generates high exposures to nanoparticles that contain ENMs and complex organics. Epidemiological literature in copier operators documents respiratory effects, including nasal blockage, cough, excessive sputum, and breathing difficulties, cardiovascular effects, oxidative stress, and inflammation. However, epidemiological studies in humans with adequate exposure assessment and dose-response analysis are lacking. We present herein the analysis of the upper airway and systemic inflammation in plasma of 19 healthy copier operators at six Singapore workplaces. We employed a repeated panel design (four biomarker measurements over two weeks) combined with a multi-marker approach (14 inflammatory cytokines in plasma and nasal lavage (NL)), and comprehensive exposure assessment using four distinct exposure metrics. We investigated spatial and temporal patterns of markers of upper airway and systemic inflammation and their association with various exposure metrics. Several inflammatory markers, namely fractalkine, IL-1β, and IL-1α in NL, and fractalkine, IL-1β, TNF-α, and IFN-γ in plasma, were strongly and positively associated with at least one exposure metric, whereas GM-CSF was negatively associated. The inflammation score was also strongly associated with TPE nanoparticle exposures. Exposure to TPE emissions induced moderate upper airway inflammation and stronger systemic inflammation in these healthy operators, characterized by upregulation of at least IL-1β, fractalkine, TNF-α and IFN-γ. Proinflammatory cytokines TNF-α, IFN-γ and IL-1β play an important role in orchestrating inflammatory responses in various clinical conditions, including cardiovascular and autoimmune disease, and likely trigger activation of endothelial cells, leading to overexpression of fractalkine, a chemokine that is involved in and associated with multiple disorders, including atherosclerosis and vascular disease. Future larger-scale epidemiological studies in these workers and consumers exposed chronically to TPE nanoparticle emissions and proactive interventions to reduce or eliminate TPE exposures are recommended.

High-Throughput Screening Platform for Nanoparticle-Mediated Alterations of DNA Repair Capacity

The potential genotoxic effects of engineered nanomaterials (ENMs) may occur through the induction of DNA damage or the disruption of DNA repair processes. Inefficient DNA repair may lead to the accumulation of DNA lesions and has been linked to various diseases, including cancer. Most studies so far have focused on understanding the nanogenotoxicity of ENM-induced damages to DNA, whereas the effects on DNA repair have been widely overlooked. The recently developed fluorescence multiplex-host-cell reactivation (FM-HCR) assay allows for the direct quantification of multiple DNA repair pathways in living cells and offers a great opportunity to address this methodological gap. Herein an FM-HCR-based method is developed to screen the impact of ENMs on six major DNA repair pathways using suspended or adherent cells. The sensitivity and efficiency of this DNA repair screening method were demonstrated in case studies using primary human small airway epithelial cells and TK6 cells exposed to various model ENMs (CuO, ZnO, and Ga2O3) at subcytotoxic doses. It was shown that ENMs may inhibit nucleotide-excision repair, base-excision repair, and the repair of oxidative damage by DNA glycosylases in TK6 cells, even in the absence of significant genomic DNA damage. It is of note that the DNA repair capacity was increased by some ENMs, whereas it was suppressed by others. Overall, this method can be part of a multitier, in vitro hazard assessment of ENMs as a functional, high-throughput platform that provides insights into the interplay of the properties of ENMs, the DNA repair efficiency, and the genomic stability.

Health effects of occupational exposure to printer emissions on workers in China: Cardiopulmonary function change

Printers emitted nanoparticles (NPs), ozone (O₃) and volatile organic chemicals (VOCs) during operation that elicited adverse effects on indoor air quality of the printing room, which may affect the health of exposed workers. The aim of this work was to explore the health effects of occupational exposure to printer emissions on workers, especially cardiovascular and lung function. We sampled particles in the print shop for characterization, including particle size distribution and elemental composition, and measured PM₁ number concentrations in print shops and other workplaces. We assessed blood pressure, heart rate and pulmonary function in 53 printing room workers and 54 controls in Beijing, China. Multiple linear regression analysis were used to examine health effects of exposure to printer emissions. The PM₁ number concentration in the print shop was more than 2 times that of the control group. Compared with controls, the exposed workers with lower education and income had heavier workload with a median of 7 days per week and 12 h per day on working days, and presented cardiopulmonary function injury with increased the diastolic blood pressure (DBP), systolic blood pressure (SBP), and mean arterial pressure (MAP). The most significant changes of cardiopulmonary function were found in exposed workers with more than 10 years of working age. Multiple linear regression also showed printer emissions exposure was associated with increased SBP and MAP, while decreased lung function indices. This study found changes in the cardiopulmonary function of staff members exposed to printer emissions, which prompted the necessity and urgency of improving the environment of printing rooms and protecting the health of exposed workers.

Pilot deep RNA sequencing of worker blood samples from Singapore printing industry for occupational risk assessment

Several engineered nanomaterials (ENMs) are used in toner-based printing equipment (TPE) including laser printers and photocopiers to improve toner performance. High concentration of airborne nanoparticles due to TPE emissions has been documented in copy centers and chamber studies. Recent animal inhalation studies by our group suggested exposure to laser printer-emitted nanoparticles (PEPs) increased cardiovascular risk by impairing ventricular performance and inducing hypertension and arrhythmia, consistent with global transcriptomic and metabolomic profiling results. There has been no genome-wide transcriptomic analysis of workers exposed to TPE emissions to systematically assess the occupational exposure health risks. In this pilot study, deep RNA sequencing of blood samples of workers in two printing companies in Singapore was performed. The genome-scale analysis of the blood samples from TPE exposed workers revealed perturbed transcriptional activities related to inflammatory and immune responses, metabolism, cardiovascular impairment, neurological diseases, oxidative stress, physical morphogenesis/deformation, and cancer, when compared with the control peers (office workers). Many of these disease risks associated with particle inhalation exposures in such work environments were consistent with the observation from the PEPs rat inhalation studies. In particular, the cell adhesion molecules (CAMs) was a top significantly perturbed pathway in blood samples from exposed workers compared with the office workers in both companies. The protein expression of sICAM was verified in plasma of exposed workers, showing a positive correlation with daily average nanoparticle concentration in indoor air measured in these two companies. Larger scale genomic and molecular epidemiology studies in copier operators are warranted in order to assess potential risks from such particulate matter exposures.

Review of the characteristics and possible health effects of particles emitted from laser printing devices

Many studies have shown that the use of laser printing devices (LPDs) contributes to the release of particles into the indoor environment. However, after more than two decades of research, the physicochemical properties of LPD-emitted particles and the possible health effects from exposure to particles are still heavily debated. We therefore carried out a critical review of the published studies around emissions and health effects of LPD-emitted particles, aiming at elucidating the nature of these particles and their potential health risks. Realizing the varying methodologies of the studies, a classification of the reviewed studies is adopted, resulting in three categories of emission studies (chamber experiment, office/room measurement, and photocopy shop measurement), and three types of health studies (in vitro/animal studies, human studies in the real world, and human studies in controlled settings). The strengths and limitations of each type of study are discussed in-depth, which in turn helps to understand the cause of divergent results. Overall, LPD-emitted particles are mainly condensed or secondary-formed semi-volatile organic compounds (SVOCs), while solid toner particles account for a very small fraction. The health risk from exposure to LPD-emitted particles is small compared with the health risk from exposure to ambient particles.

Inflammation Increases Susceptibility of Human Small Airway Epithelial Cells to Pneumonic Nanotoxicity

Exposure to inhaled anthropogenic nanomaterials (NM) with dimension <100 nm has been implicated in numerous adverse respiratory outcomes. Although studies have identified key NM physiochemical determinants of pneumonic nanotoxicity, the complex interactive and cumulative effects of NM exposure, especially in individuals with preexisting inflammatory respiratory diseases, remain unclear. Herein, the susceptibility of primary human small airway epithelial cells (SAEC) exposed to a panel of reference NM, namely, CuO, ZnO, mild steel welding fume (MSWF), and nanofractions of copier center particles (Nano-CCP), is examined in normal and tumor necrosis factor alpha (TNF-α)-induced inflamed SAEC. Compared to normal SAEC, inflamed cells display an increased susceptibility to NM-induced cytotoxicity by 15-70% due to a higher basal level of intracellular reactive oxygen species (ROS). Among the NM screened, ZnO, CuO, and Nano-CCP are observed to trigger an overcompensatory response in normal SAEC, resulting in an increased tolerance against subsequent oxidative insults. However, the inflamed SAEC fails to adapt to the NM exposure due to an impaired nuclear factor erythroid 2-related factor 2 (Nrf2)-mediated cytoprotective response. The findings reveal that susceptibility to pulmonary nanotoxicity is highly dependent on the interplay between NM properties and inflammation of the alveolar milieu.

Occupational Inhalation Exposures to Nanoparticles at Six Singapore Printing Centers

Laser printers emit high levels of nanoparticles (PM_0.1) during operation. Although it is well established that toners contain multiple engineered nanomaterials (ENMs), little is known about inhalation exposures to these nanoparticles and work practices in printing centers. In this report, we present a comprehensive inhalation exposure assessment of indoor microenvironments at six commercial printing centers in Singapore, the first such assessment outside of the United States, using real-time personal and stationary monitors, time-integrated instrumentation, and multiple analytical methods. Extensive presence of ENMs, including titanium dioxide, iron oxide, and silica, was detected in toners and in airborne particles collected from all six centers studied. We document high transient exposures to emitted nanoparticles (peaks of ∼500 000 particles/cm³, lung-deposited surface area of up to 220 μm²/cm³, and PM_0.1 up to 16 μg/m³) with complex PM_0.1 chemistry that included 40-60 wt % organic carbon, 10-15 wt % elemental carbon, and 14 wt % trace elements. We also record 271.6-474.9 pmol/mg of Environmental Protection Agency-priority polycyclic aromatic hydrocarbons. These findings highlight the potentially high occupational inhalation exposures to nanoparticles with complex compositions resulting from widespread usage of nano-enabled toners in the printing industry, as well as inadequate ENM-specific exposure control measures in these settings.

Inhalation of printer-emitted particles impairs cardiac conduction, hemodynamics, and autonomic regulation and induces arrhythmia and electrical remodeling in rats

BACKGROUND

Using engineered nanomaterial-based toners, laser printers generate aerosols with alarming levels of nanoparticles that bear high bioactivity and potential health risks. Yet, the cardiac impacts of printer-emitted particles (PEPs) are unknown. Inhalation of particulate matter (PM) promotes cardiovascular morbidity and mortality, and ultra-fine particulates (< 0.1 μm aerodynamic diameter) may bear toxicity unique from larger particles. Toxicological studies suggest that PM impairs left ventricular (LV) performance; however, such investigations have heretofore required animal restraint, anesthesia, or ex vivo preparations that can confound physiologic endpoints and/or prohibit LV mechanical assessments during exposure. To assess the acute and chronic effects of PEPs on cardiac physiology, male Sprague Dawley rats were exposed to PEPs (21 days, 5 h/day) while monitoring LV pressure (LVP) and electrocardiogram (ECG) via conscious telemetry, analyzing LVP and heart rate variability (HRV) in four-day increments from exposure days 1 to 21, as well as ECG and baroreflex sensitivity. At 2, 35, and 70 days after PEPs exposure ceased, rats received stress tests.

RESULTS

On day 21 of exposure, PEPs significantly (P < 0.05 vs. Air) increased LV end systolic pressure (LVESP, + 18 mmHg) and rate-pressure-product (+ 19%), and decreased HRV indicating sympathetic dominance (root means squared of successive differences [RMSSD], - 21%). Overall, PEPs decreased LV ejection time (- 9%), relaxation time (- 3%), tau (- 5%), RMSSD (- 21%), and P-wave duration (- 9%). PEPs increased QTc interval (+ 5%) and low:high frequency HRV (+ 24%; all P < 0.05 vs. Air), while tending to decrease baroreflex sensitivity and contractility index (- 15% and - 3%, P < 0.10 vs. Air). Relative to Air, at both 2 and 35 days after PEPs, ventricular arrhythmias increased, and at 70 days post-exposure LVESP increased. PEPs impaired ventricular repolarization at 2 and 35 days post-exposure, but only during stress tests. At 72 days post-exposure, PEPs increased urinary dopamine 5-fold and protein expression of ventricular repolarizing channels, Kv1.5, Kv4.2, and Kv7.1, by 50%.

CONCLUSIONS

Our findings suggest exposure to PEPs increases cardiovascular risk by augmenting sympathetic influence, impairing ventricular performance and repolarization, and inducing hypertension and arrhythmia. PEPs may present significant health risks through adverse cardiovascular effects, especially in occupational settings, among susceptible individuals, and with long-term exposure.

Prediction of protein corona on nanomaterials by machine learning using novel descriptors

Effective in silico methods to predict protein corona compositions on engineered nanomaterials (ENMs) could help elucidate the biological outcomes of ENMs in biosystems without the need for conducting lengthy experiments for corona characterization. However, the physicochemical properties of ENMs, used as the descriptors in current modeling methods, are insufficient to represent the complex interactions between ENMs and proteins. Herein, we utilized the fluorescence change (FC) from fluorescamine labeling on a protein, with or without the presence of the ENM, as a novel descriptor of the ENM to build machine learning models for corona formation. FCs were significantly correlated with the abundance of the corresponding proteins in the corona on diverse classes of ENMs, including metal and metal oxides, nanocellulose, and 2D ENMs. Prediction models established by the random forest algorithm using FCs as the ENM descriptors showed better performance than the conventional descriptors, such as ENM size and surface charge, in the prediction of corona formation. Moreover, they were able to predict protein corona formation on ENMs with very heterogeneous properties. We believe this novel descriptor can improve in silico studies of corona formation, leading to a better understanding on the protein adsorption behaviors of diverse ENMs in different biological matrices. Such information is essential for gaining a comprehensive view of how ENMs interact with biological systems in ENM safety and sustainability assessments.

Integrated Transcriptomics, Metabolomics, and Lipidomics Profiling in Rat Lung, Blood, and Serum for Assessment of Laser Printer-Emitted Nanoparticle Inhalation Exposure-Induced Disease Risks

Laser printer-emitted nanoparticles (PEPs) generated from toners during printing represent one of the most common types of life cycle released particulate matter from nano-enabled products. Toxicological assessment of PEPs is therefore important for occupational and consumer health protection. Our group recently reported exposure to PEPs induces adverse cardiovascular responses including hypertension and arrythmia via monitoring left ventricular pressure and electrocardiogram in rats. This study employed genome-wide mRNA and miRNA profiling in rat lung and blood integrated with metabolomics and lipidomics profiling in rat serum to identify biomarkers for assessing PEPs-induced disease risks. Whole-body inhalation of PEPs perturbed transcriptional activities associated with cardiovascular dysfunction, metabolic syndrome, and neural disorders at every observed time point in both rat lung and blood during the 21 days of exposure. Furthermore, the systematic analysis revealed PEPs-induced transcriptomic changes linking to other disease risks in rats, including diabetes, congenital defects, auto-recessive disorders, physical deformation, and carcinogenesis. The results were also confirmed with global metabolomics profiling in rat serum. Among the validated metabolites and lipids, linoleic acid, arachidonic acid, docosahexanoic acid, and histidine showed significant variation in PEPs-exposed rat serum. Overall, the identified PEPs-induced dysregulated genes, molecular pathways and functions, and miRNA-mediated transcriptional activities provide important insights into the disease mechanisms. The discovered important mRNAs, miRNAs, lipids and metabolites may serve as candidate biomarkers for future occupational and medical surveillance studies. To the best of our knowledge, this is the first study systematically integrating in vivo, transcriptomics, metabolomics, and lipidomics to assess PEPs inhalation exposure-induced disease risks using a rat model.

Comprehensive Assessment of Short-Lived ROS and H2O2 in Laser Printer Emissions: Assessing the Relative Contribution of Metal Oxides and Organic Constituents

Inhalation exposure to nanoparticles from toner-based laser printer and photocopier emissions (LPEs) induces airway inflammation and systemic oxidative stress, cytotoxicity, and genotoxicity (such as DNA damage). Recent evidence from human and in vitro studies suggests a strong role for oxidative stress caused by free radicals, such as reactive oxygen species (ROS), in the toxicity of laser printer emissions. However, the amount of ROS generated from laser printer nanoparticle emissions and the relative contribution of various fractions (vapors, organics, metals, and metal oxides) have not been investigated to-date. In this study, we aim to quantify short-lived ROS and H₂O₂ laser printer emissions, as well as the relative contribution of various fractions of LPEs in ROS generation. An aerosol chamber with HEPA filtered air was used to generate LPE emissions from one representative printer. In separate experiments, size fractionated LPEs were collected on filters (particles) or impingers (particles and vapors). The nanoscale fraction of LPEs (PM_0.1) was further separated into the organic fraction and inorganic (transition metals/metal oxides) following a sequence of extraction with solvents and centrifugation. The short-lived ROS and H₂O₂ generated from each fraction were quantified with an acellular Trolox-based liquid chromatography-electrospray-tandem mass spectrometry (LC-ESI-MS/MS) method recently developed in our lab. The particulate fraction of LPEs PM_0.1 generated 2.68 times more total ROS (sum of short-lived ROS and H₂O₂) than the vapor fraction. In tested LPEs, transition metal oxides, which constituted 3% by mass, produced 69× and 202× times more short-lived ROS and H₂O₂, respectively, on a mass basis, than the organic fraction. Furthermore, fresh PM_0.1 generated 282× and 32× times more short-lived ROS and H₂O₂, respectively, than aged and processed PM_0.1. We conclude that transition metal oxides, albeit a minor constituent of the LPE PM_0.1 emissions, are the species responsible for the majority of acellular ROS in this printer. A larger range of printers should be tested in the future. Because transition metal oxides in toners originate primarily from engineering nanomaterials (ENMs) in printer toner powder, reformulation of toner powders to contain less of these ROS active metals is recommended.

Adverse Effects of Fine-Particle Exposure on Joints and Their Surrounding Cells and Microenvironment

Current understanding of the health risks and adverse effects upon exposure to fine particles is premised on the direct association of particles with target organs, particularly the lung; however, fine-particle exposure has also been found to have detrimental effects on sealed cavities distant to the portal-of-entry, such as joints. Moreover, the fundamental toxicological issues have been ascribed to the direct toxic mechanisms, in particular, oxidative stress and proinflammatory responses, without exploring the indirect mechanisms, such as compensated, adaptive, and secondary effects. In this Review, we recapitulate the current findings regarding the detrimental effects of fine-particle exposure on joints, the surrounding cells, and microenvironment, as well as their deteriorating impact on the progression of arthritis. We also elaborate the likely molecular mechanisms underlying the particle-induced detrimental influence on joints, not limited to direct toxicity, but also considering the other indirect mechanisms. Because of the similarities between fine air particles and engineered nanomaterials, we compare the toxicities of engineered nanomaterials to those of fine air particles. Arthritis and joint injuries are prevalent, particularly in the elderly population. Considering the severity of global exposure to fine particles and limited studies assessing the detrimental effects of fine-particle exposure on joints and arthritis, this Review aims to appeal to a broad interest and to promote more research efforts in this field.

Assessing the chronic respiratory health risk associated with inhalation exposure to powdered toner for printing in actual working conditions: a cohort study on occupationally exposed workers over 10 years

BACKGROUND

Little epidemiological evidence exists regarding the chronic respiratory effects of inhaled powdered toner exposure in humans, although several case reports have suggested the existence of lung disorders that might be related to exposure to toner dust.

OBJECTIVE

We aimed to estimate the chronic health risk to humans associated with routine toner dust exposure in copier industry workers under current actual work conditions.

DESIGN

A prospective observational cohort study of occupational population.

METHODS

Changes in chest radiogram, spirometry measurements and serum and urine biomarkers of biomedical responses to extrinsic stress, as well as subjective symptoms were longitudinally observed for up to 10 years in Japanese copier industry workers responsible for the manufacturing, maintenance or recycling of powdered toner or toner-using machines. A total of 694 subjects who did not change their work category during the follow-up and were free from chronic respiratory diseases at the baseline survey provided reliable results on at least three survey occasions during 3 years or more of follow-up.

RESULTS

Typical fibrosis findings associated with pneumoconiosis was not observed on chest radiograms. No significant differences associated with toner exposure were noted in the frequency of new incidence of either non-specific findings on chest radiogram or serum fibrosis biomarkers (sialylated carbohydrate antigen KL-6 and surfactant protein D). However, the exposed subjects tended to show increases in the frequency of respiratory symptoms and reduced spirometry results during the follow-up compared with the control group, although significant differences were only seen in chronic cough.

CONCLUSIONS

Under the current reasonably controlled work environmental conditions, lung fibrotic changes caused by inhaled dust exposure, including powdered toner, appear to be relatively uncommon; however, non-specific temporal irritation causing subjective symptoms and inflammatory responses might exist.

Deep Airway Inflammation and Respiratory Disorders in Nanocomposite Workers

Thousands of researchers and workers worldwide are employed in nanocomposites manufacturing, yet little is known about their respiratory health. Aerosol exposures were characterized using real time and integrated instruments. Aerosol mass concentration ranged from 0.120 mg/m³ to 1.840 mg/m³ during nanocomposite machining processes; median particle number concentration ranged from 4.8 × 10⁴ to 5.4 × 10⁵ particles/cm³. The proportion of nanoparticles varied by process from 40 to 95%. Twenty employees, working in nanocomposite materials research were examined pre-shift and post-shift using spirometry and fractional exhaled nitric oxide (FeNO) in parallel with 21 controls. Pro-inflammatory leukotrienes (LT) type B4, C4, D4, and E4; tumor necrosis factor (TNF); interleukins; and anti-inflammatory lipoxins (LXA4 and LXB4) were analyzed in their exhaled breath condensate (EBC). Chronic bronchitis was present in 20% of researchers, but not in controls. A significant decrease in forced expiratory volume in 1 s (FEV1) and FEV1/forced vital capacity (FVC) was found in researchers post-shift (p ˂ 0.05). Post-shift EBC samples were higher for TNF (p ˂ 0.001), LTB4 (p ˂ 0.001), and LTE4 (p ˂ 0.01) compared with controls. Nanocomposites production was associated with LTB4 (p ˂ 0.001), LTE4 (p ˂ 0.05), and TNF (p ˂ 0.001), in addition to pre-shift LTD4 and LXB4 (both p ˂ 0.05). Spirometry documented minor, but significant, post-shift lung impairment. TNF and LTB4 were the most robust markers of biological effects. Proper ventilation and respiratory protection are required during nanocomposites processing.

Markers of Oxidative Stress in the Exhaled Breath Condensate of Workers Handling Nanocomposites

Researchers in nanocomposite processing may inhale a variety of chemical agents, including nanoparticles. This study investigated airway oxidative stress status in the exhaled breath condensate (EBC). Nineteen employees (42.4 ± 11.4 y/o), working in nanocomposites research for 18.0 ± 10.3 years were examined pre-shift and post-shift on a random workday, together with nineteen controls (45.5 ± 11.7 y/o). Panels of oxidative stress biomarkers derived from lipids, nucleic acids, and proteins were analyzed in the EBC. Aerosol exposures were monitored during three major nanoparticle generation operations: smelting and welding (workshop 1) and nanocomposite machining (workshop 2) using a suite of real-time and integrated instruments. Mass concentrations during these operations were 0.120, 1.840, and 0.804 mg/m³, respectively. Median particle number concentrations were 4.8 × 10⁴, 1.3 × 10⁵, and 5.4 × 10⁵ particles/cm³, respectively. Nanoparticles accounted for 95, 40, and 61%, respectively, with prevailing Fe and Mn. All markers of nucleic acid and protein oxidation, malondialdehyde, and aldehydes C₆⁻C13 were elevated, already in the pre-shift samples relative to controls in both workshops. Significant post-shift elevations were documented in lipid oxidation markers. Significant associations were found between working in nanocomposite synthesis and EBC biomarkers. More research is needed to understand the contribution of nanoparticles from nanocomposite processing in inducing oxidative stress, relative to other co-exposures generated during welding, smelting, and secondary oxidation processes, in these workshops.

Ingested engineered nanomaterials: state of science in nanotoxicity testing and future research needs

BACKGROUND

Engineered nanomaterials (ENM) are used extensively in food products to fulfill a number of roles, including enhancement of color and texture, for nutritional fortification, enhanced bioavailability, improved barrier properties of packaging, and enhanced food preservation. Safety assessment of ingested engineered nanomaterials (iENM) has gained interest in the nanotoxicology community in recent years. A variety of test systems and approaches have been used for such evaluations, with in vitro monoculture cell models being the most common test systems, owing to their low cost and ease-of-use. The goal of this review is to systematically assess the current state of science in toxicological testing of iENM, with particular emphasis on model test systems, their physiological relevance, methodological strengths and challenges, realistic doses (ranges and rates), and then to identify future research needs and priorities based on these assessments.

METHODS

Extensive searches were conducted in Google Scholar, PubMed and Web of Science to identify peer-reviewed literature on safety assessment of iENM over the last decade, using keywords such as "nanoparticle", "food", "toxicity", and combinations thereof. Relevant literature was assessed based on a set of criteria that included the relevance of nanomaterials tested; ENM physicochemical and morphological characterization; dispersion and dosimetry in an in vitro system; dose ranges employed, the rationale and dose realism; dissolution behavior of iENM; endpoints tested, and the main findings of each study. Observations were entered into an excel spreadsheet, transferred to Origin, from where summary statistics were calculated to assess patterns, trends, and research gaps.

RESULTS

A total of 650 peer-reviewed publications were identified from 2007 to 2017, of which 39 were deemed relevant. Only 21% of the studies used food grade nanomaterials for testing; adequate physicochemical and morphological characterization was performed in 53% of the studies. All in vitro studies lacked dosimetry and 60% of them did not provide a rationale for the doses tested and their relevance. Only 12% of the studies attempted to consider the dissolution kinetics of nanomaterials. Moreover, only 1 study attempted to prepare and characterize standardized nanoparticle dispersions.

CONCLUSION

We identified 5 clusters of factors deemed relevant to nanotoxicology of food-grade iENM: (i) using food-grade nanomaterials for toxicity testing; (ii) performing comprehensive physicochemical and morphological characterization of iENM in the dry state, (iii) establishing standard NP dispersions and their characterization in cell culture medium, (iv) employing realistic dose ranges and standardized in vitro dosimetry models, and (v) investigating dissolution kinetics and biotransformation behavior of iENM in synthetic media representative of the gastrointestinal (GI) tract fluids, including analyses in a fasted state and in the presence of a food matrix. We discussed how these factors, when not considered thoughtfully, could influence the results and generalizability of in vitro and in vivo testing. We conclude with a set of recommendations to guide future iENM toxicity studies and to develop/adopt more relevant in vitro model systems representative of in vivo animal and human iENM exposure scenarios.

Acute health effects of desktop 3D printing (fused deposition modeling) using acrylonitrile butadiene styrene and polylactic acid materials: An experimental exposure study in human volunteers

3D printers are increasingly run at home. Nanoparticle emissions from those printers have been reported, which raises the question whether adverse health effects from ultrafine particles (UFP) can be elicited by 3D printers. We exposed 26 healthy adults in a single-blinded, randomized, cross-over design to emissions of a desktop 3D printer using fused deposition modeling (FDM) for 1 hour (high UFP-emitting acrylonitrile butadiene styrene [ABS] vs low-emitting polylactic acid [PLA]). Before and after exposures, cytokines (IL-1β, IL-6, TNF-α, INF-γ) and ECP in nasal secretions, exhaled nitric oxide (FeNO), urinary 8-isoprostaglandin F_2α (8-iso PGF_2α ), and self-reported symptoms were assessed. The exposures had no significant differential effect on 8-iso PGF_2α and nasal biomarkers. However, there was a difference (P < .05) in the time course of FeNO, with higher levels after ABS exposure. Moreover, indisposition and odor nuisance were increased for ABS exposure. These data suggest that 1 hour of exposure to 3D printer emissions had no acute effect on inflammatory markers in nasal secretions and urine. The slight relative increase in FeNO after ABS printing compared to PLA might be due to eosinophilic inflammation from inhaled UFP particles. This possibility should be investigated in further studies using additional biomarkers and longer observation periods.

Assessment of the inhalation risks associated with working in printing rooms: a study on the staff of eight printing rooms in Beijing, China

The concentration of pollution directly determines the occupational health risk, and the exposure time is an important influencing factor. We evaluated the inhalation risks of working in a printing room. Eight units with centralized printing rooms were randomly selected. Formaldehyde, ozone, benzene, toluene, xylene, and fine particulate matter were detected by spectrophotometry, gas chromatography, and direct reading instruments, respectively. The U.S. EPA inhalation risk assessment model was used to assess cancer and non-cancer risks. The formaldehyde inhalation cancer risk value was 1.35-3.45 × 10^-6, which is greater than the limit of 1 × 10^-6, suggesting a risk of squamous cell carcinoma. The benzene inhalation cancer risk in five of the rooms was 1.09-4.65 × 10^-6, which is greater than the limit of 1 × 10^-6, suggesting a risk of leukemia. In terms of non-cancer risk, in five of the rooms, the hazard quotient (HQ) was > 1 (range 1.99-4.69) due to benzene pollution, suggesting a risk of reduced lymphocyte count. In one room, due to benzene and xylene pollution, the HQ was > 1, suggesting a risk of lymphocyte count drop and motor coordination impairment. Collectively, the study concludes that staff members of printing rooms are exposed to both cancer and non-cancer occupational health risks.

The impact of nanomaterial characteristics on inhalation toxicity

During the last few decades, nanotechnology has evolved into a success story, apparent from a steadily increasing number of scientific publications as well as a large number of applications based on engineered nanomaterials (ENMs). Its widespread uses suggest a high relevance for consumers, workers and the environment, hence justifying intensive investigations into ENM-related adverse effects as a prerequisite for nano-specific regulations. In particular, the inhalation of airborne ENMs, being assumed to represent the most hazardous type of human exposure to these kinds of particles, needs to be scrutinized. Due to an increased awareness of possible health effects, which have already been seen in the case of ultrafine particles (UFPs), research and regulatory measures have set in to identify and address toxic implications following their almost ubiquitous occurrence. Although ENM properties differ from those of the respective bulk materials, the available assessment protocols are often designed for the latter. Despite the large benefit ensuing from the application of nanotechnology, many issues related to ENM behavior and adverse effects are not fully understood or should be examined anew. The traditional hypothesis that ENMs exhibit different or additional hazards due to their "nano" size has been challenged in recent years and ENM categorization according to their properties and toxicity mechanisms has been proposed instead. This review summarizes the toxicological effects of inhaled ENMs identified to date, elucidating the modes of action which provoke different mechanisms in the respiratory tract and their resulting effects. By linking particular mechanisms and adverse effects to ENM properties, grouping of ENMs based on toxicity-related properties is supposed to facilitate toxicological risk assessment. As intensive studies are still required to identify these "ENM classes", the need for alternatives to animal studies is evident and advances in cell-based test systems for pulmonary research are presented here. We hope to encourage the ongoing discussion about ENM risks and to advocate the further development and practice of suitable testing and grouping methods.

Effective delivery of sonication energy to fast settling and agglomerating nanomaterial suspensions for cellular studies: Implications for stability, particle kinetics, dosimetry and toxicity

Typical in vitro assays used for high throughput toxicological screening and measuring nano-bio interactions are conducted by pipetting suspensions of engineered nanomaterials (ENMs) dispersed in nutrient-rich culture media directly onto cells. In order to achieve fairly monodisperse and stable suspensions of small agglomerates, ultrasonic energy is usually applied to break apart large agglomerates that can form upon suspension in liquid. Lack of standardized protocols and methods for delivering sonication energy can introduce variability in the ENM suspension properties (e.g. agglomerate size, polydispersity, suspension stability over time), and holds significant implications for in vitro dosimetry, toxicity, and other nano-bio interactions. Careful assessment of particle transformations during dispersion preparation and sonication is therefore critical for accurate interpretation of in vitro toxicity studies. In this short communication, the difficulties of preparing stable suspensions of rapidly settling ENMs are presented. Furthermore, methods to optimize the delivery of the critical sonication energy required to break large agglomerates and prepare stable, fairly monodispersed suspensions of fast settling ENMs are presented. A methodology for the efficient delivery of sonication energy in a discrete manner is presented and validated using various rapidly agglomerating and settling ENMs. The implications of continuous vs. discrete sonication on average hydrodynamic diameter, and polydispersity was also assessed for both fast and slow settling ENMs. For the rapidly agglomerating and settling ENMs (Ag15%/SiO2, Ag and CeO2), the proposed discrete sonication achieved a significant reduction in the agglomerate diameter and polydispersity. In contrast, the relatively slow agglomerating and settling Fe2O3 suspension did not exhibit statistically significant differences in average hydrodynamic diameter or polydispersity between the continuous and discrete sonication approaches. Our results highlight the importance of using the proposed material-specific discrete sonication method to effectively deliver the critical sonication energy necessary to reproducibly achieve stable and fairly monodispersed suspensions that are suitable for in vitro toxicity testing.

Neglected nano-effects of nanoparticles in the interpretation of their toxicity

Considering the traditional mass, concentration, or surface area of nanoparticles can affect the conclusions drawn from cell viability tests about the toxicity of nanoparticles.

Synergistic effects of engineered nanoparticles and organics released from laser printers using nano-enabled toners: potential health implications from exposures to the emitted organic aerosol

Recent studies have shown that engineered nanoparticles (ENPs) are incorporated into toner powder used in printing equipment and released during their use. Thus, understanding the functional and structural composition and potential synergistic effects of this complex aerosol and released gaseous co-pollutants is critical in assessing their potential toxicological implications and risks. In this study, toner powder and PEPs were thoroughly examined for functional and molecular composition of the organic fraction and the concentration profile of 16 Environmental Protection Agency (EPA)-priority polycyclic aromatic hydrocarbons (PAH) using state of the art analytical methods. Results show significant differences in abundance of non-exchangeable organic hydrogen of toner powder and PEPs, with a stronger aromatic spectral signature in PEPs. Changes in structural composition of PEPs are indicative of radical additions and free-radical polymerization favored by catalytic reactions, resulting in formation of functionalized organic species. Particularly, accumulation of aromatic carbons with strong styrene-like molecular signatures on PEPs is associated with formation of semivolatile heavier aromatic species (i.e., PAHs). Further, the transformation of low molecular weight PAHs in the toner powder to high molecular weight PAHs in PEPs was documented and quantified. This may be a result of synergistic effects from catalytic metal/metal oxide ENPs incorporated into the toner and the presence/release of semi-volatile organic species (SVOCs). The presence of known carcinogenic PAHs on PEPs raises public health concerns and warrants further toxicological assessment.