A current global view of environmental and occupational cancers

Pan-cancer analysis of the interplay between mutational signatures and cellular signaling

Cancer is a multi-faceted disease with intricate relationships between mutagenic processes, alterations in cellular signaling, and the tissue microenvironment. To date, these processes have been largely studied in isolation. A systematic understanding of how they interact and influence each other is lacking. Here, we present a framework for systematically characterizing the interaction between pairs of mutational signatures and between signatures and signaling pathway alterations. We applied this framework to large-scale data from TCGA and PCAWG and identified multiple positive and negative interactions, both cross֊tissue and tissue֊specific, that provide new insights into the molecular routes observed in tumorigenesis and their respective drivers. This framework allows for a more fine-grained dissection of common and distinct etiology of mutational signatures. We further identified several interactions with both positive and negative impacts on patient survival, demonstrating their clinical relevance and potential for improving personalized cancer care.

Expression deregulation of genes related to DNA repair and lead toxicity in occupationally exposed industrial workers

OBJECTIVE

Globally millions of people working in various industries and are exposed to different toxins which may affect their genetic stability and DNA integrity. Present study was designed to estimate the expression variation of genes related to DNA repair (XRCC1, PARP1) and lead toxicity (ALAD) in exposed industrial workers.

METHODS

About 200 blood samples were collected from workers of brick kiln, welding, furniture and paint industry (50/industry) along with age and gender matched controls. mRNA expression of genes was measured using RT-PCR. Serum levels of total ROS, POD, TBAR activity was calculated. Blood lead levels were estimated by atomic absorption spectrometer.

RESULTS

Relative expression of XRCC1 and PARP1 gene was significantly (P < 0.001) upregulated, while ALAD gene expression was downregulated in exposed group compared to control. Expression of XRCC1 and PARP1 was increased (P < 0.001) in exposed workers with > 30 year age compared to control with > 30 year age. Same was observed when < 30 year age group of control and exposed was compared. Likewise, XRCC1 and PARP1 expression was increased (P < 0.001) in exposed workers with > 30 year age compared to workers with < 30 year age. Whereas, ALAD gene showed significant (P < 0.01) decrease in > 30 year age workers compared to control of same age and exposed with < 30 year of age. Relative expression of XRCC1 and PARP1 was increased (P < 0.001) in exposed smokers compared to exposed non-smokers and control smokers. Whereas, ALAD gene expression reduced (P < 0.001) significantly in both groups. Blood lead content was higher (P < 0.001) in exposed group compared to control. Strong correlation was observed between XRCC1, PARP1 and ALAD gene versus age, total exposure duration, exposure per day and lead deposition. ROS, TBARS and POD activity was higher (P < 0.01) in exposed group compared to control group.

CONCLUSION

Present study suggested deregulation of genes related to DNA repair and lead intoxication in exposed group compared to controls. Strong correlation was observed between selected genes and demographic parameters. Present results revealed altered activity of oxidative stress markers which would induce oxidative damage to DNA integrity and limit the function of repair enzymes.

Absolute telomere length in peripheral blood lymphocytes of workers exposed to construction environment

Construction environment is composed of various substances classified as carcinogens. Thus, workers exposed in this environment can be susceptible to genomic instability that can be evaluated by absolute telomere length (TL). In this work, we evaluated TL in construction workers compared to a non-exposed group performed by qPCR assay. The TL was evaluated in 59 men exposed to the construction environment (10 years of exposure) and 49 men non-exposed. Our data showed that individuals exposed to the construction environment exhibited a significantly lower TL in relation to non-exposed group (p = 0.009). Also, on the multiple linear regression model, we observed that TL was significantly influenced by the construction environment exposure (p ≤ 0.001). Additionally, the arsenic exposure is associated to a shortening telomere (p ≤ 0.001), and the lead exposure caused an increase in TL (p ≤ 0.001). Thus, our findings suggest a modulation in TL by construction environment exposure, mainly by arsenic and lead exposure.

Efficient Samarium-Grafted-C3N4-Doped α-MoO3 Used as a Dye Degrader and Antibacterial Agent: In Silico Molecular Docking Study

This study was used to evaluate the catalytic activity (CA) and bactericidal activity of α-MoO3 and Sm-g-C3N4-doped α-MoO3 composites prepared through an efficient, cost-effective coprecipitation route. Their characteristic studies verify the formation of α-MoO3 and its composites (3, 6, and 9 mL Sm-g-C3N4-doped α-MoO3), which showed high crystallinity, as confirmed by X-ray diffraction (XRD) analysis. The production of superoxide and hydroxyl radicals due to charge transfer through α-MoO3 and g-C3N4 eventually forms electrons in g-C3N4 and holes around α-MoO3. CA against Rhodamine B (RhB) in basic medium provides maximum results compared to acidic and neutral media. The bactericidal efficacy of the (9 mL) doped sample represents a greater inhibition zone of 6.10 mm against the negative bacterial strain Escherichia coli. Furthermore, in silico studies showed that the generated nanorods may inhibit DNA gyrase and dihydropteroate synthase (DHPS) enzymes.

Microbial Fuel Cell-Based Biosensors and Applications

The sustainable development of human society in today's high-tech world depends on some form of eco-friendly energy source because existing technologies cannot keep up with the rapid population expansion and the vast amounts of wastewater that result from human activity. A green technology called a microbial fuel cell (MFC) focuses on using biodegradable trash as a substrate to harness the power of bacteria to produce bioenergy. Production of bioenergy and wastewater treatment are the two main uses of MFC. MFCs have also been used in biosensors, water desalination, polluted soil remediation, and the manufacture of chemicals like methane and formate. MFC-based biosensors have gained a lot of attention in the last few decades due to their straightforward operating principle and long-term viability, with a wide range of applications including bioenergy production, treatment of industrial and domestic wastewater, biological oxygen demand, toxicity detection, microbial activity detection, and air quality monitoring, etc. This review focuses on several MFC types and their functions, including the detection of microbial activity.

Novel chiral Schiff base Palladium(II), Nickel(II), Copper(II) and Iron(II) complexes: Synthesis, characterization, anticancer activity and molecular docking studies

In this study, two chiral Schiff base ligands (L1 and L2) were synthesized from the condensation reaction of (S)-2-amino-3-phenyl-1-propanol with 2-hydroxybenzaldehyde and 2-hydroxy-1-naphthaldehyde as metal precursors for the preparation of transition metal complexes with Pd(II), Fe(II), Ni(II) and Cu(II). The compounds were characterized by using X-ray (for L1-Pd(II)), NMR, FT-IR, UV-Vis, magnetic susceptibility, molar conductivity, and elemental analysis. The in vitro cytotoxic effects of ligands (L1 and L2) and their metal complexes on colon cancer cells (DLD-1), breast cancer cells (MDA-MB-231) and healthy lung human cell lines were investigated by using the 3-(4,5-dimethylthiazol-2-yl)-2,5‑diphenyl tetrazolium bromide (MTT) assay. Among the synthesized compounds, L1-Pd(II) was particularly found to be the most potent anticancer drug candidate in this series with IC50 values of 4.07, and 9.97 µM in DLD-1 and MDA-MB-231 cell lines, respectively. In addition, molecular docking results indicate that Glu122, Asn103, Ala104, Lys126, Phe114, Leu123, and Lys126 amino acids are the binding site of the colon cancer antigen protein, in which the most active complex, L1-Pd(II) can inhibit the current target.

Recent developments in MOF and MOF based composite as potential adsorbents for removal of aqueous environmental contaminants

With the growth of globalization which has been the primary cause of water pollution, it is utmost necessary for us living being to have access to clean water for the purpose of drinking, washing and various other useful applications. With the purpose of future security and to restore our ecological balance, it is essential to give much significance towards the removal of unwanted toxic contaminants from our water resources. In this regard adsorptive removal of toxic pollutants from wastewater with porous adsorbent is regarded as one of the most promising way for water decontamination process. Metal organic frameworks (MOFs) comprising of uniformly arranged pores, abundant active sites and containing an easily tunable structure has aroused as a promising material for adsorbent to remove the unwanted contaminants from water sources. The adsorption of pollutants by the different MOFs surface are driven by various interactions including π-π, acid-base, electrostatic and H-bonding etc. On the other hand, the removal of various contaminants by MOFs is influenced by various factors including pH, temperature and initial concentration. In this review we will specifically discuss the adsorptive removal of different organic and inorganic pollutants present in our water systems with the use of MOFs as adsorbent along with the various factors and interaction mechanism manipulating the adsorption behaviour.

Solar Boosting Pollutant Removal plus Hydrogen Production by Lifting-Heat and Lowering-Potential Chemical Synergy

Solar-boosted oxidation plus hydrogen production for pollutant removal in wastewater, driven by a high thermal and low-potential electrochemical combination, is facilitated and demonstrated from theory to experiments. One sun fully offers both thermal and electrical energy powered thermo- and electrochemistry for pollutant oxidation. Solar thermal action provides high temperatures for the activation of the pollutant molecules to gear up for solar-driven electrochemical oxidation. Taking wastewater containing phenol as an example, the cyclic voltammetry (CV) curves display two redox processes at less than 100 °C, while only one redox process of single oxidation of phenol appears at more than 100 °C. The oxidation of phenol is accompanied by an efficient evolution of hydrogen, in which the yield of 0.627 mL at 30 °C is increased to 2.294 mL at 210 °C. The phenol removal is enhanced to 80.50% at 210 °C. Tracking the reaction progress shows that small molecular organic acids are detected as the only intermediate at the high temperatures, which suggests the easy realization of full mineralization. The kinetic reaction of the phenol oxidation is fitted to the first order with an increase of the rate constant of 10 times compared with that at low temperatures. Solar engineering of oxidation of organic pollutants not only solves the issue of energy demand for the tough wastewater treatment but also realizes fast and efficient oxidation of organic pollutants. This study opens up new avenues to achieve solar wastewater treatment and simultaneous hydrogen production.

Cobalt-induced oxidative stress contributes to alveolar/bronchiolar carcinogenesis in B6C3F1/N mice

Rodent alveolar/bronchiolar carcinomas (ABC) that arise either spontaneously or due to chemical exposure are similar to a subtype of lung adenocarcinomas in humans. B6C3F1/N mice and F344/NTac rats exposed to cobalt metal dust (CMD) by inhalation developed ABCs in a dose dependent manner. In CMD-exposed mice, the incidence of Kras mutations in ABCs was 67% with 80% of those being G to T transversions on codon 12 suggesting a role of oxidative stress in the pathogenesis. In vitro studies, such as DMPO (5,5-dimethyl-1-pyrroline N-oxide) immune-spin trapping assay, and dihydroethidium (DHE) fluorescence assay on A549 and BEAS-2B cells demonstrated increased oxidative stress due to cobalt exposure. In addition, significantly increased 8-oxo-dG adducts were demonstrated by immunohistochemistry in lungs from mice exposed to CMD for 90 days. Furthermore, transcriptomic analysis on ABCs arising spontaneously or due to chronic CMD-exposure demonstrated significant alterations in canonical pathways related to MAPK signaling (IL-8, ErbB, Integrin, and PAK pathway) and oxidative stress (PI3K/AKT and Melatonin pathway) in ABCs from CMD-exposed mice. Oxidative stress can stimulate PI3K/AKT and MAPK signaling pathways. Nox4 was significantly upregulated only in CMD-exposed ABCs and NOX4 activation of PI3K/AKT can lead to increased ROS levels in human cancer cells. The gene encoding Ereg was markedly up-regulated in CMD-exposed mice. Oncogenic KRAS mutations have been shown to induce EREG overexpression. Collectively, all these data suggest that oxidative stress plays a significant role in CMD-induced pulmonary carcinogenesis in rodents and these findings may also be relevant in the context of human lung cancers.

Novel prism shaped C3N4-doped Fe@Co3O4 nanocomposites and their dye degradation and bactericidal potential with molecular docking study

Novel prism shaped C₃N₄-doped Fe@Co₃O₄ nanocomposites were fabricated via a co-precipitation route for effective removal of organic pollutants from water and for bactericidal applications. Doping of C₃N₄ in the heterojunction significantly enhanced the photocatalytic and sonocatalytic activity against methylene blue ciprofloxacin (MBCF) dye. The main purpose of doping Fe atoms in the cobalt lattice was to generate crystal and surface defects. Moreover, the optimum doping amount of C₃N₄ for maximum degradation performance was evaluated. A detailed examination of the prepared nanocomposites was carried out systematically using various characterization tools for better understanding. HR-TEM images revealed the formation of novel prism shaped structures that exhibited outstanding degradation of the organic dye in water. Significant bactericidal potential was also observed for the synthesized nanocomposites against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria. In silico, molecular docking studies against β-lactamase, DHFR and FabI enzymes served to elucidate the mechanism governing the bactericidal activity of the as-synthesized nanoparticles (NPs). Furthermore, a scavenging study by DPPH (2,2-diphenyl-1-picrylhydrazyl) assay and COD (chemical oxygen demand) analysis was performed in order to evaluate active species and the anti-oxidant potential of prepared composites.

This study provides new insights into the use of cobalt-based heterojunction photocatalysts for dye degradation and antibacterial applications (a) synthesis mechanism of C₃N₄ (b) schematic of synthesis route adopted for fabrication of nanocomposites.

The role of autophagy in metal-induced urogenital carcinogenesis

Environmental and/or occupational exposure to metals such as Arsenic (As), Cadmium (Cd), and Chromium (Cr) have been shown to induce carcinogenesis in various organs, including the urogenital system. However, the mechanisms responsible for metal-induced carcinogenesis remain elusive. We and others have shown that metals are potent inducers of autophagy, which has been suggested to be an adaptive stress response to allow metal-exposed cells to survive in hostile environments. Albeit few, recent experimental studies have shown that As and Cd promote tumorigenesis via autophagy and that inhibition of autophagic signaling suppressed metal-induced carcinogenesis. In light of the newly emerging role of autophagic involvement in metal-induced carcinogenesis, the present review focuses explicitly on the mechanistic role of autophagy and potential signaling pathways involved in As-, Cd-, and Cr-induced urogenital carcinogenesis.

Epidemiological Research on Occupational and Environmental Carcinogens

The cancer risk associated with exposure to environmental and occupational carcinogens such as asbestos, benzene, radiation, or lifestyle carcinogens such as cigarette smoking depends on the entire history of exposure to the carcinogen, including the age of exposure and the time-varying intensity of exposure [...].

Hawk-Seq™ differentiates between various mutations in Salmonella typhimurium TA100 strain caused by exposure to Ames test-positive mutagens

A precise understanding of differences in genomic mutations according to the mutagenic mechanisms detected in mutagenicity data is required to evaluate the carcinogenicity of environmental mutagens. Recently, we developed a highly accurate genome sequencing method, ‘Hawk-Seq™’, that enables the detection of mutagen-induced genome-wide mutations. However, its applicability to detect various mutagens and identify differences in mutational profiles is not well understood. Thus, we evaluated DNA samples from Salmonella typhimurium TA100 exposed to 11 mutagens, including alkylating agents, aldehydes, an aromatic nitro compound, epoxides, aromatic amines and polycyclic aromatic hydrocarbons (PAHs). We extensively analysed mutagen-induced mutational profiles and studied their association with the mechanisms of mutagens. Hawk-Seq™ sensitively detected mutations induced by all 11 mutagens, including one that increased the number of revertants by approximately 2-fold in the Ames test. Although the sensitivity for less water-soluble mutagens was relatively low, we increased the sensitivity to obtain high-resolution spectra by modifying the exposure protocol. Moreover, two epoxides indicated similar 6- or 96-dimensional mutational patterns; likewise, three S_N1-type alkylating agents indicated similar mutational patterns, suggesting that the mutational patterns are compound category specific. Meanwhile, an S_N2 type alkylating agent exhibited unique mutational patterns compared to those of the S_N1 type alkylating agents. Although the mutational patterns induced by aldehydes, the aromatic nitro compound, aromatic amines and PAHs did not differ substantially from each other, the maximum total base substitution frequencies (MTSFs) were similar among mutagens in the same structural groups. Furthermore, the MTSF was found to be associated with the carcinogenic potency of some direct-acting mutagens. These results indicate that our method can generate high-resolution mutational profiles to identify characteristic features of each mutagen. The detailed mutational data obtained by Hawk-Seq™ can provide useful information regarding mutagenic mechanisms and help identify its association with the carcinogenicity of mutagens without requiring carcinogenicity data.

Occupational and Environmental Carcinogenesis

Occupational carcinogens have been shown to cause a considerable disease burden at a national and global level [...].

Synthesis, characterization, and evaluation of a selective molecularly imprinted polymer for quantification of the textile dye acid violet 19 in real water samples

A molecularly imprinted polymer (MIP) was developed for the determination of acid violet 19 (AV19) dye. The MIP was synthesized by polymerization using 1-vinyl imidazole (functional monomer) and 2,2'-azobis(2-methylpropionitrile) as the radical initiator. The functional monomer was previously selected by computational simulations. The MIP adsorption data could be fitted using the Langmuir model obtained a Q_m value of 6.93 mg g^-1 and 2.84 mg g^-1 for the corresponding non-imprinted polymer (NIP) and the process followed pseudo-second-order kinetics (k₂ 0.2416 mg g^-1 min^-1 MIP). The BET specific surface areas were 229.6 m² g^-1 and 28.6 m² g^-1, to MIP and NIP, respectively. Analyses showed that the material provided excellent selectivity towards acid violet 19 (AV19) when compared to other analytes including Acid Violet 17 (AV17), Tartrazine (TZ), Acid Red 14 (AR14), Patent blue-VF (PBV), Sunset yellow FCF (SY) and Acid Red 1 (AR1). The calculated K_d value for the MIP was 0.116 L g^-1 and the imprinting factor was 2.89. This alternative and effective material for the enrichment, extraction, and determination of acid violet 19 presents in complex real samples was applied using two different rivers water and industrial effluent, with excellent recoveries values ranging between 85% up to 99%.

Microbial Fuel Cell-Based Biosensors

The microbial fuel cell (MFC) is a promising environmental biotechnology that has been proposed mainly for power production and wastewater treatment. Though small power output constrains its application for directly operating most electrical devices, great progress in its chemical, electrochemical, and microbiological aspects has expanded the applications of MFCs into other areas such as the generation of chemicals (e.g., formate or methane), bioremediation of contaminated soils, water desalination, and biosensors. In recent decades, MFC-based biosensors have drawn increasing attention because of their simplicity and sustainability, with applications ranging from the monitoring of water quality (e.g., biochemical oxygen demand (BOD), toxicants) to the detection of air quality (e.g., carbon monoxide, formaldehyde). In this review, we summarize the status quo of MFC-based biosensors, putting emphasis on BOD and toxicity detection. Furthermore, this review covers other applications of MFC-based biosensors, such as DO and microbial activity. Further, challenges and prospects of MFC-based biosensors are briefly discussed.

Microbial Fuel Cell-Based Biosensors

The microbial fuel cell (MFC) is a promising environmental biotechnology that has been proposed mainly for power production and wastewater treatment. Though small power output constrains its application for directly operating most electrical devices, great progress in its chemical, electrochemical, and microbiological aspects has expanded the applications of MFCs into other areas such as the generation of chemicals (e.g., formate or methane), bioremediation of contaminated soils, water desalination, and biosensors. In recent decades, MFC-based biosensors have drawn increasing attention because of their simplicity and sustainability, with applications ranging from the monitoring of water quality (e.g., biochemical oxygen demand (BOD), toxicants) to the detection of air quality (e.g., carbon monoxide, formaldehyde). In this review, we summarize the status quo of MFC-based biosensors, putting emphasis on BOD and toxicity detection. Furthermore, this review covers other applications of MFC-based biosensors, such as DO and microbial activity. Further, challenges and prospects of MFC-based biosensors are briefly discussed.

A Compendium of Mutational Signatures of Environmental Agents

Whole-genome-sequencing (WGS) of human tumors has revealed distinct mutation patterns that hint at the causative origins of cancer. We examined mutational signatures in 324 WGS human-induced pluripotent stem cells exposed to 79 known or suspected environmental carcinogens. Forty-one yielded characteristic substitution mutational signatures. Some were similar to signatures found in human tumors. Additionally, six agents produced double-substitution signatures and eight produced indel signatures. Investigating mutation asymmetries across genome topography revealed fully functional mismatch and transcription-coupled repair pathways. DNA damage induced by environmental mutagens can be resolved by disparate repair and/or replicative pathways, resulting in an assortment of signature outcomes even for a single agent. This compendium of experimentally induced mutational signatures permits further exploration of roles of environmental agents in cancer etiology and underscores how human stem cell DNA is directly vulnerable to environmental agents. VIDEO ABSTRACT.

Big Data in occupational medicine: the convergence of -omics sciences, participatory research and e-health

Background:

New occupational hazards and risks are emerging in our progressively globalized society, in which ageing, migration, wild urbanization and rapid economic growth have led to unprecedented biological, chemical and physical exposures, linked to novel technologies, products and duty cycles. A focus shift from worker health to worker/citizen and community health is crucial. One of the major revolutions of the last decades is the computerization and digitization of the work process, the so-called “work 4.0”, and of the workplace.

Objectives:

To explore the roles and implications of Big Data in the new occupational medicine settings.

Methods:

Comprehensive literature search.

Results:

Big Data are characterized by volume, variety, veracity, velocity, and value. They come both from wet-lab techniques (“molecular Big Data”) and computational infrastructures, including databases, sensors and smart devices (“computational Big Data” and “digital Big Data”).

Conclusions:

In the light of novel hazards and thanks to new analytical approaches, molecular and digital underpinnings become extremely important in occupational medicine. Computational and digital tools can enable us to uncover new relationships between exposures and work-related diseases; to monitor the public reaction to novel risk factors associated to occupational diseases; to identify exposure-related changes in disease natural history; and to evaluate preventive workplace practices and legislative measures adopted for workplace health and safety.

Evaluation of DNA Methylation Changes and Micronuclei in Workers Exposed to a Construction Environment

Methylation levels in tumor-suppressor genes and repetitive sequences have previously been used to study the relationship between environmental air pollution and epigenetic changes related to cancer. In this study, we measured the methylation profiles of the promoter regions CDKN2A, MLH1 and APC and the repetitive sequence LINE-1 in 59 workers exposed to the construction environment and in 49 unexposed workers. We also evaluated the micronuclei frequency and levels of trace elements in the blood of all workers. We evaluated of levels of particulate matter and polycyclic aromatic hydrocarbons (PAHs) at the construction site to characterize the environmental exposure. Our findings demonstrated that exposed workers exhibited significantly higher average levels of promoter methylation of CDKN2A, APC, and MLH1 genes and increased hypomethylation of the LINE-1 in comparison to unexposed workers (all p < 0.05). A higher frequency of micronuclei was observed in the exposed group (2 ± 2) compared to the unexposed group (1 ± 1) with p < 0.001. High levels of particulate matter (51⁻841 μg/m³) and some PAHs were found in samples from the construction environment. In summary, we provide evidence of increased DNA damage and altered DNA methylation of exposed workers, suggesting that genomic approaches to biomonitoring may be an effective way of estimating future cancer risk for construction workers.

Removal of Arsenic(III) from Aqueous Solution Using Metal Organic Framework-Graphene Oxide Nanocomposite

MIL-53(Al)-graphene oxide (GO) nanocomposites of different GO to MIL-53(Al) mass ratios (1% to 25% GO) were synthesized and tested for removal of arsenite (As(III)), which is a well-known groundwater contaminant. The properties of MIL-53(Al)-GO nanocomposites were characterized using X-ray Diffraction (XRD), Fourier Transform Infrared (FT-IR) Spectroscopy, Brunauer-Emmett-Teller (BET) surface area measurements, and Scanning Electron Microscopy (SEM). Batch experiments were performed on MIL-53(Al)-GO nanocomposites for As(III) adsorption in aqueous solutions to investigate adsorption kinetics and isotherm behavior under varying environmental conditions. The effects of solution pH (2 to 11), initial As(III) concentrations (10–110 mg/L), adsorbent dosage (0.2–3.0 g/L), and temperature (298–318 K) on As(III) adsorption were investigated. MIL-53(Al)-GO nanocomposites showed higher adsorption of As(III) than pristine MIL-53(Al) and GO individually. As (III) removal was optimized at a ratio of 3% GO in the MIL-53(Al)-GO nanocomposite, with an adsorption capacity of 65 mg/g. The adsorption kinetics and isotherms followed pseudo-second-order and Langmuir isotherm models, respectively. Overall, these results suggest that MIL-53(Al)-GO nanocomposite holds a significant promise for use in the remediation of As (III) from groundwater and other aqueous solutions.

STAT3, a Hub Protein of Cellular Signaling Pathways, Is Triggered by β-Hexaclorocyclohexane

BACKGROUND

Organochlorine pesticides (OCPs) are widely distributed in the environment and their toxicity is mostly associated with the molecular mechanisms of endocrine disruption. Among OCPs, particular attention was focused on the effects of β-hexaclorocyclohexane (β-HCH), a widely common pollutant. A detailed epidemiological study carried out on exposed population in the "Valle del Sacco" found correlations between the incidence of a wide range of diseases and the occurrence of β-HCH contamination. Taking into account the pleiotropic role of the protein signal transducer and activator of transcription 3 (STAT3), its function as a hub protein in cellular signaling pathways triggered by β-HCH was investigated in different cell lines corresponding to tissues that are especially vulnerable to damage by environmental pollutants.

MATERIALS AND METHODS

Human prostate cancer (LNCaP), human breast cancer (MCF-7 and MDA-MB 468), and human hepatoma (HepG2) cell lines were treated with 10 μM β-HCH in the presence or absence of specific inhibitors for different receptors. All samples were subjected to analysis by immunoblotting and RT-qPCR.

RESULTS AND CONCLUSIONS

The preliminary results allow us to hypothesize the involvement of STAT3, through both its canonical and non-canonical pathways, in response to β-HCH. Moreover, we ascertained the role of STAT3 as a master regulator of energy metabolism via the altered expression and localization of HIF-1α and PKM2, respectively, resulting in a Warburg-like effect.

Dual Roles of Oxidative Stress in Metal Carcinogenesis

It has been well established that environmental and occupational exposure to heavy metal causes cancer in several organs. Although the exact mechanism of heavy metal carcinogenesis remains elusive, metal-generated reactive oxygen species (ROS) are essential. ROS can play two roles in metal carcinogenesis; two stages in the process of metal carcinogenesis differ in the amounts of ROS activating a dual redox-mediated mechanism. In the early stage of metal carcinogenesis, ROS acts in an oncogenic role. However, in the late stage of metal carcinogenesis, ROS plays an antioncogenic role. Similarly, NF-E2-related factor 2 (Nrf2) also has two different roles, which makes it a key molecule for separating metal carcinogenesis into two different stages. In the early stage, inducible Nrf2 fights against elevated ROS to decrease cell transformation by its antioxidant protection property. In the late stage, constitutively activated Nrf2 manipulates reduced ROS to perform a comfortable environment for apoptosis resistance through an oncogenic role. Interestingly, a cunning carcinogenic mechanism takes advantage of the dual role of Nrf2 to implement the dual role of ROS through a series of redox adaption mechanisms. In this review, we discuss the paradox in the rationales behind the two opposite ROS roles and focus on their potential pharmacological application. The dual role of ROS represents a 'double-edged sword' with many possible novel ROS-mediated strategies in cancer therapy in metal carcinogenesis.

Prognostication of Survival Outcomes in Patients Diagnosed with Glioblastoma

OBJECTIVE

Glioblastoma multiforme (GBM) is an aggressive primary brain tumor with dismal survival. This study aims to examine the prognostic value of primary tumor sites and race on survival outcomes.

METHODS

Patient data obtained from the Scott and White Hospital Brain Tumor Registry (1976-2013) were stratified according to sex, age, race, primary tumor site, vital status, and survival.

RESULTS

Of the 645 patients, 580 (89.9%) were diagnosed with GBM not otherwise specified (GBM NOS), 57 (8.8%) with GBM, and 8 (1.2%) with giant-cell GBM. Most were male (53.5%), aged 50 years or older (78.7%). The white population had the highest GBM prevalence (87.1%) and the lowest overall survival versus all other race groups (6.6% vs. 30.1%; P < 0.01). The black population had a relatively low prevalence of GBM (5.9%) and the greatest overall survival versus all others (47.4% vs. 7.3%; P < 0.01). Primary tumor sites located in the temporal (25.8% vs. 20.2%; P = 0.03), occipital (8.1% vs. 2.9%; P = 0.05), and parietal lobes (24.2% vs. 20.8%; P = 0.05) had a greater occurrence in surviving individuals. The overall survival for men versus women was (62.9% vs. 37.1%; P = 0.12).

CONCLUSIONS

Black racial background and temporal, occipital, or parietal primary tumor sites are suggestive of positive survival outcomes. Conversely, white racial background with primary tumor sites in the brain overlapping and NOS areas seem to be associated with negative outcomes and decreased survival. Thus, racial background and primary tumor site may be useful prognostic factors in patients with GBM.

Analysis of individuals with leukemia: cancer surveillance system limitations

Cancer is the second leading cause of death in the world with great impact on public health and leukemia is a hematological cancer directly related to different exposures at work. This study aimed to describe the occupational profile of individuals diagnosed with leukemia. This is a cross-sectional study of cases registered between 2007 and 2011 in the Integrador RHC database. Individuals from 26 Brazilian states, aged 20 years or older, were included. Of the 7,807 cases of leukemia, Minas Gerais recorded the highest occurrence (1,351). Only 52% of the cases had information on occupation. Occupations with the greatest number of cases of leukemia were agricultural, forestry and fishing workers; services, stores and markets vendors; and workers in the production of industrial goods and services. These occupations are exposed to substances considered by literature as carcinogenic agents to humans. There was a high underreporting of occupational data, compromising the quality of information and, therefore, the effectiveness of the Brazilian health surveillance system. The RHC also does not provide information about the agent used during the working day, the exposure time during working life and data from previous occupations.

The gender difference and mortality-to-incidence ratio relate to health care disparities in bladder cancer: National estimates from 33 countries

The variation in the mortality-to-incidence ratio (MIR) between countries and genders reflects the complex etiology and intervention of bladder cancer. In this study, we investigated the MIR variation between genders and health care disparities among countries. Cancer incidence and mortality were obtained from the GLOBOCAN 2012 database. The ranking and the total expenditure on health of countries were obtained from the World Health Organization. Linear regression was used to estimate the significance between variables. We estimated the role of MIRs from 33 countries. Bladder cancer incidence and mortality rates were higher in more developed regions, Europe, and the Americas. The MIRs were higher in less developed regions. Analysis according to country revealed Germany to have the lowest MIR. High relative MIRs (female MIR/male MIR) for bladder cancer were noted in many developed countries. A correlation between MIR and health care disparities among countries was indicated by a significant association between the World Health Organization ranking and total expenditure on health/GDP with the MIR and relative MIR. Low bladder cancer MIR is prone to be more prevalent in countries with good health care system.

Bio-Engineered Graphene-Based Cage for Efficient Local Enrichment and Biodegradation of Aqueous Organic Wastes

Microorganism immobilization has attracted great attention as a traditional method to overcome aqueous organic wastes containing N, N-dimethylformamide (DMF). In this approach, graphene oxide was modified with functional polymer firstly to obtain micro-composites material (PGO), and then the prepared composites were deposited on the surface of copper mesh (CM) to block the meshes and CM@PGO was achieved. Moreover, cage-shaped model was designed based on CM@PGO and P. denitrificans was packed inside the cage for batch experiments. This strategy could enrich the local concentration of DMF due to the formation of hydrogen bonds with the oxygen-containing groups from PGO and the character of bacteria in captivity could also contribute to the process of degradation. Results showed that the approach could remove DMF more efficiently about 15% compared with free microorganism and presented excellent cycling performance. Meantime, physical adsorption and chemical adsorption were both contributed to the process of PGO adsorption, and the adsorption isotherm fits Langmuir model well, furthermore, the theoretical maximum of adsorption ability calculated through Langmuir model is 95 mg/g. In other words, this cage-shaped CM@PGO provided a facile platform for treating various wastewaters by altering the species of packed microorganisms, which exhibited considerable prospects for wastewater treatment.

Metallothionein and Glutathione Content as Biomarkers of Metal Pollution in Mussels and Local Fishermen in Abu Qir Bay, Egypt

BACKGROUND

When heavy metals accumulate in air, soil, and water, the risk of human exposure increases among industrial workers, as well as in people living near polluted areas. Heavy metals adversely affect a variety of bodily systems such as the cardiovascular, respiratory, endocrine, immune, and reproductive systems. In addition, long-term exposure and accumulation of heavy metals in the body may disturb oxidative stress genes and thus increase the susceptibility to various diseases.

OBJECTIVES

The aim of this study is to estimate the metallothionein concentration in both mussel samples from Abu Qir Bay, Egypt and the blood of local fishermen as a biomarker of exposure to metal pollution.

METHODS

Levels of metallothionein and heavy metals were measured in mussels. Blood levels of metallothionein and heavy metals of local fishermen were measured and compared with a control group. The effect of heavy metal exposure on oxidative stress status was investigated through the determination of malondialdehyde (MDA), catalase and glutathione content.

RESULTS

The results of this study showed high concentrations of metallothionein in mussels and in fishermen's blood, accompanied by high concentrations of metals such as cadmium (Cd), copper (Cu), lead (Pb), chromium (Cr), and zinc (Zn). At the same time, a significant decrease in glutathione content and catalase enzyme activity was associated with a significant increase in the malondialdehyde concentrations in sera of fishermen.

CONCLUSIONS

The present study found that the El Maadiya region is polluted with heavy metals, inducing oxidative stress in fishermen in the vicinity. These results reveal the necessity of further environmental monitoring in the study area in order to evaluate other types of pollutants and their effects on human health.

Evaluation of DNA damage and DNA repair capacity in occupationally lead-exposed workers

Occupational lead (Pb) exposure remains a significant concern for workers in Turkey. Health hazards of Pb exposure have been investigated in various test systems, but results regarding its potential genotoxic effects on exposed populations are contradictory. In this study, a control group and an exposed group were studied, each consisting of 25 male subjects. Blood lead levels (BLLs) were estimated by graphite furnace atomic absorption spectrometry. Genotoxic effects of Pb exposure were studied in leukocytes by comet and challenge assays. The effect of Pb exposure to DNA repair capacity was evaluated following in vitro hydrogen peroxide exposure. Pb-exposed workers had significantly higher BLLs than the control group ( p < 0.01). DNA damage in exposed workers had a significantly higher percentage of DNA in tail than the control group ( p < 0.05). In the challenge assay, it was found that the mean DNA% repair capacity was significantly decreased in Pb-exposed workers ( p < 0.01). The results indicated that occupational Pb exposure is associated with DNA damage and causes decrease in DNA% repair capacity, indicating a potential health concern for occupationally Pb-exposed populations.

Prevention and Early Detection of Occupational Cancers - a View of Information Technology Solutions

Thousands of people die each year from cancer due to occupational causes. To reduce cancer in workers, preventive strategies should be used in the high-risk workplace. The effective prevention of occupational cancer requires knowledge of carcinogen agents. Like other areas of healthcare industry, occupational health has been affected by information technology solutions to improve prevention, early detection, treatment and finally the efficiency and cost effectiveness of the healthcare system. Information technology solutions are thus an important issue in the healthcare field. Information about occupational cancer in information systems is important for policy makers, managers, physicians, patients and researchers; because examples that include high quality data about occupational cancer patients and occupational cancer causes are able to determine the worker groups which require special attention. As a result exposed workers who are vulnerable can undergo screening and be considered for preventive interventions.

Progress and prospects of reactive oxygen species in metal carcinogenesis

Carcinogenesis induced by environmental metal exposure is a major public health concern. The exact mechanisms underlying metal carcinogenesis remain elusive. In the past few decades, the relationship between metal induced generation of reactive oxygen species (ROS) and the mechanism of metal carcinogenesis has been established. The carcinogenic process is a very complex one. In the early stage of metal carcinogenesis or cell transformation high levels of ROS are oncogenic by causing DNA damage, genetic instability, epigenetic alteration, and metabolic reprogramming, leading to malignant transformation. In the second stage of metal carcinogenesis or the cancer development of metal-transformed cells, low levels of ROS are carcinogenic by promoting apoptosis resistance. The metal-transformed cells have the property of autophagy deficiency, resulting in accumulation of p62 and constitutive activation of Nrf2, and leading to higher levels of antioxidants, decreased levels of ROS, apoptosis resistance, inflammation, and angiogenesis. This review summarizes the most recent development in the field of metal carcinogenesis with emphasis on the difference in cellular events between early (cell transformation) and late (after cell transformation) stages of metal carcinogenesis.

Cancer Stem-Like Cells Accumulated in Nickel-Induced Malignant Transformation

Nickel compounds are known as human carcinogens. Chronic environmental exposure to nickel is a worldwide health concern. Although the mechanisms of nickel-induced carcinogenesis are not well understood, recent studies suggest that stem cells/cancer stem cells are likely important targets. This study examines the role of cancer stem cells in nickel-induced cell transformation. The nontransformed human bronchial epithelial cell line (Beas-2B) was chronically exposed to nickel chloride for 12 months to induce cell transformation. Nickel induced Beas-2B cell transformation, and cancer stem-like cells were enriched in nickel-transformed cell (BNiT) population. The BNiT cancer stem-like cells demonstrated enhanced self-renewal and distinctive differentiation properties. In vivo tumorigenesis studies show that BNiT cancer stem-like cells possess a high tumor-initiating capability. It was also demonstrated that superoxide dismutase 1 was involved in the accumulation of cancer stem-like cells; the regulation of superoxide dismutase 1 expression was different in transformed stem-like cells and nontransformed. Overall, the accumulation of stem-like cells and their enhanced stemness functions contribute to nickel-induced tumorigenesis. Our study provides additional insight into the mechanisms by which metals or other chemicals can induce carcinogenesis.

An aquaporin PvTIP4;1 from Pteris vittata may mediate arsenite uptake

The fern Pteris vittata is an arsenic hyperaccumulator. The genes involved in arsenite (As(III)) transport are not yet clear. Here, we describe the isolation and characterization of a new P. vittata aquaporin gene, PvTIP4;1, which may mediate As(III) uptake. PvTIP4;1 was identified from yeast functional complement cDNA library of P. vittata. Arsenic toxicity and accumulating activities of PvTIP4;1 were analyzed in Saccharomyces cerevisiae and Arabidopsis. Subcellular localization of PvTIP4;1-GFP fusion protein in P. vittata protoplast and callus was conducted. The tissue expression of PvTIP4;1 was investigated by quantitative real-time PCR. Site-directed mutagenesis of the PvTIP4;1 aromatic/arginine (Ar/R) domain was studied. Heterologous expression in yeast demonstrates that PvTIP4;1 was able to facilitate As(III) diffusion. Transgenic Arabidopsis showed that PvTIP4;1 increases arsenic accumulation and induces arsenic sensitivity. Images and FM4-64 staining suggest that PvTIP4;1 localizes to the plasma membrane in P. vittata cells. A tissue location study shows that PvTIP4;1 transcripts are mainly expressed in roots. Site-directed mutation in yeast further proved that the cysteine at the LE1 position of PvTIP4;1 Ar/R domain is a functional site. PvTIP4;1 is a new represented tonoplast intrinsic protein (TIP) aquaporin from P. vittata and the function and location results imply that PvTIP4;1 may be involved in As(III) uptake.

Occupational and environmental exposures and cancers in developing countries

BACKGROUND

Over the past few decades, there has been a decline in cancers attributable to environmental and occupational carcinogens of asbestos, arsenic, and indoor and outdoor air pollution in high-income countries. For low- to middle-income countries (LMICs), however, these exposures are likely to increase as industrialization expands and populations grow.

OBJECTIVE

The aim of this study was to review the evidence on the cancer risks and burdens of selected environmental and occupational exposures in less-developed economies.

FINDINGS

A causal association has been established between asbestos exposure and mesothelioma and lung cancer. For arsenic exposure, there is strong evidence of bladder, skin, lung, liver, and kidney cancer effects. Women are at the highest risk for lung cancer due to indoor air pollution exposure; however, the carcinogenic effect on the risk for cancer in children has not been studied in these countries. Cancer risks associated with ambient air pollution remain the least studied in LMICs, although reported exposures are higher than World Health Organization, European, and US standards. Although some associations between lung cancer and ambient air pollutants have been reported, studies in LMICs are weak or subject to exposure misclassification. For pulmonary cancers, tobacco smoking and respiratory diseases have a positive synergistic effect on cancer risks.

CONCLUSIONS

A precise quantification of the burden of human cancer attributable to environmental and occupational exposures in LMICs is uncertain. Although the prevalence of carcinogenic exposures has been reported to be high in many such countries, the effects of the exposures have not been studied due to varying country-specific limitations, some of which include lack of resources and government support.

Toxic effects of formaldehyde on the urinary system

Formaldehyde is a chemical substance with a pungent odor that is highly soluble in water and occurs naturally in organisms. Formaldehyde, when taken into organisms, is metabolized into formic acid in the liver and erythrocytes and is then excreted, either with the urine and feces or via the respiratory system. Form-aldehyde is widely used in the industrial and medical fields, and employees in these sectors are frequently exposed to it. Anatomists and medical students are affected by formaldehyde gas during dissection lessons. Because full protection from formaldehyde is impossible for employees in industrial plants using this chemical and for workers in laboratory conditions, several measures can be implemented to prevent and/or reduce the toxic effects of formaldehyde. In this review, we aimed to identify the toxic effects of formaldehyde on the urinary system.

Additive Synergism between Asbestos and Smoking in Lung Cancer Risk: A Systematic Review and Meta-Analysis

Smoking and asbestos exposure are important risks for lung cancer. Several epidemiological studies have linked asbestos exposure and smoking to lung cancer. To reconcile and unify these results, we conducted a systematic review and meta-analysis to provide a quantitative estimate of the increased risk of lung cancer associated with asbestos exposure and cigarette smoking and to classify their interaction. Five electronic databases were searched from inception to May, 2015 for observational studies on lung cancer. All case-control (N = 10) and cohort (N = 7) studies were included in the analysis. We calculated pooled odds ratios (ORs), relative risks (RRs) and 95% confidence intervals (CIs) using a random-effects model for the association of asbestos exposure and smoking with lung cancer. Lung cancer patients who were not exposed to asbestos and non-smoking (A-S-) were compared with; (i) asbestos-exposed and non-smoking (A+S-), (ii) non-exposure to asbestos and smoking (A-S+), and (iii) asbestos-exposed and smoking (A+S+). Our meta-analysis showed a significant difference in risk of developing lung cancer among asbestos exposed and/or smoking workers compared to controls (A-S-), odds ratios for the disease (95% CI) were (i) 1.70 (A+S-, 1.31-2.21), (ii) 5.65; (A-S+, 3.38-9.42), (iii) 8.70 (A+S+, 5.8-13.10). The additive interaction index of synergy was 1.44 (95% CI = 1.26-1.77) and the multiplicative index = 0.91 (95% CI = 0.63-1.30). Corresponding values for cohort studies were 1.11 (95% CI = 1.00-1.28) and 0.51 (95% CI = 0.31-0.85). Our results point to an additive synergism for lung cancer with co-exposure of asbestos and cigarette smoking. Assessments of industrial health risks should take smoking and other airborne health risks when setting occupational asbestos exposure limits.

Wood dust exposure induces cell transformation through EGFR-mediated OGG1 inhibition

A high risk of neoplastic transformation of nasal and paranasal sinuses mucosa is related to the occupational exposure to wood dust. However, the role of occupational exposures in the aetiology of the airway cancers remains largely unknown. Here, an in vitro model was performed to investigate the carcinogenic effect of wood dusts. Human bronchial epithelial cells were incubated with hard and soft wood dusts and the DNA damage and response to DNA damage evaluated. Wood dust exposure induced accumulation of oxidised DNA bases, which was associated with a delay in DNA repair activity. By exposing cells to wood dust at a prolonged time, wood dust-initiated cells were obtained. Initiated-cells were able to form colonies in soft agar, and to induce blood vessel formation. These cells showed extensive autophagy, reduced DNA repair, which was associated with reduced OGG1 expression and oxidised DNA base accumulation. These events were found related to the activation of EGFR/AKT/mTOR pathway, through phosphorylation and subsequent inactivation of tuberin. The persistence in the tissue of wood dusts, their repetitious binding with EGFR may continually trigger the activation switch, leading to chronic down-regulation of genes involved in DNA repair, leading to cell transformation and proliferation.

Increased cytogenetic abnormalities in exfoliated oral mucosal cells of South Indian foundry workers

Biomonitoring offers a valuable tool to estimate the genetic risk as of exposure to genotoxic agents. Here, we intend to assess the potential cytogenetic damage related with occupational exposure to polycyclic aromatic hydrocarbons by evaluating the genetic damages in exfoliated buccal epithelial cells of foundry workers via counting micronucleus (MNs) and other nuclear abnormalities (NAs). This was a cross-sectional study and all study subjects were male . Exfoliated buccal mucosal cells were obtained from 100 subjects involved in either foundry molding or melting processes, and 100 controls matched for sex, age, and smoking from the area of Coimbatore city, Southern India. For each individual, 2000 exfoliated buccal cells were analyzed. Significantly, there was a higher frequency of MN in the exposed workers than in the controls (P < 0.05). Smoking was associated with the increased frequencies of micronuclei and NAs in the buccal epithelium of both the control and the exposed groups. Smoking represented significant factors in terms of increasing the production of MN when the control and the exposed groups were compared (P < 0.05). The results specify that buccal cells of foundry workers display increased levels of genotoxicity and these biomarker responses may be related to the increased cancer risk. These results conclude that the studied individuals are at a risk group and they require periodical biological monitoring and proper care which is essential for them.

Conventional to Nano-Green Adsorbents for Water Pollution Management - A Review

Pure and clean water is a must for living a healthy life. However, the increasing influence of urbanization, industrialization, domestic and agricultural activities, is continuously adding both conventional and newly emerging pollutants to the earth's water bodies, seriously affecting both the terrestrial and aquatic flora and fauna. Thus water pollution has become a major issue in the global perspectives. In the last few decades, numerous methods, such as chemical precipitation, filtration, oxidation, ion exchange treatment and adsorption have been proposed for the purification of contaminated water. Among these methods, adsorption has taken an important position in water purification technology. This is because of its ease of operations, cost-effective maintenance, and availability of adsorbents in various forms with high surface area, porous structure and specific surface reactivity. Instead of having many attractive properties, many adsorbents have failed to achieve a good acceptability at commercial levels. In the recent years, nanotechnology approaches have introduced nanoadsorbent which is capable of removing water pollutants more efficiently. In this review, various water treatment techniques with their shortcomings followed by efficiency of adsorption and nanoadsorbent for pollutant removal are discussed with green chemistry perspectives.