Toxicity and clearance of intratracheally administered multiwalled carbon nanotubes from murine lung

Application of stem cells in the study of developmental and functional toxicity of endodermal-derived organs caused by nanoparticles

Nanoparticles have unique properties that make them useful in biomedicine. However, their extensive use raises concerns about potential hazards to the body. Therefore, it is crucial to establish effective and robust toxicology models to evaluate the developmental and functional toxicity of nanoparticles on the body. This article discusses the use of stem cells to study the developmental and functional toxicity of organs of endodermal origin due to nanoparticles. The study discovered that various types of nanoparticles have varying effects on stem cells. The application of stem cell models can provide a possibility for studying the effects of nanoparticles on organ development and function, as they can more accurately reflect the toxic mechanisms of different types of nanoparticles. However, stem cell toxicology systems currently cannot fully reflect the effects of nanoparticles on entire organs. Therefore, the establishment of organoid models and other advanced assessment models is expected to address this issue.

Effects of Multiwall Carbon Nanotubes on Premature Kidney Aging: Biochemical and Histological Analysis

Carbon nanotubes (CNTs) have gained much attention due to their superb properties, which make them promising options for the reinforcing composite materials with desirable mechanical properties. However, little is known about the linkage between lung exposure to nanomaterials and kidney disease. In this study, we compared the effects on the kidneys and aging for two different types of multiwall carbon nanotubes (MWCNTs): pristine MWCNTs (PMWCNTs) and acid-treated MWCNTs (TMWCNTs), with TMWCNTs being the preferred form for use as a composite material due to its superior dispersion properties. We used tracheal instillation and maximum tolerated dose (MTD) for both types of CNTs. MTD was determined as a 10% weight loss dose in a 3-month subchronic study, and the appropriate dosage for 1-year exposure was 0.1 mg/mouse. Serum and kidney samples were analyzed using ELISA, Western blot, and immunohistochemistry after 6 months and 1 year of treatment. PMWCNT-administered mice showed the activation of pathways for inflammation, apoptosis, and insufficient autophagy, as well as decreased serum Klotho levels and increased serum levels of DKK-1, FGF-23, and sclerostin, while TMWCNTs did not. Our study suggests that lung exposure to PMWCNTs can induce premature kidney aging and highlights a possible toxic effect of using MWCNTs on the kidneys in the industrial field, further highlighting that dispersibility can affect the toxicity of the nanotubes.

Diverse Pathways of Engineered Nanoparticle-Induced NLRP3 Inflammasome Activation

With the rapid development of engineered nanomaterials (ENMs) in biomedical applications, their biocompatibility and cytotoxicity need to be evaluated properly. Recently, it has been demonstrated that inflammasome activation may be a vital contributing factor for the development of biological responses induced by ENMs. Among the inflammasome family, NLRP3 inflammasome has received the most attention because it directly interacts with ENMs to cause the inflammatory effects. However, the pathways that link ENMs to NLRP3 inflammasome have not been thoroughly summarized. Thus, we reviewed recent findings on the role of major ENMs properties in modulating NLRP3 inflammasome activation, both in vitro and in vivo, to provide a better understanding of the underlying mechanisms. In addition, the interactions between ENMs and NLRP3 inflammasome activation are summarized, which may advance our understanding of safer designs of nanomaterials and ENM-induced adverse health effects.

Mechanical Performance and Applications of CNTs Reinforced Polymer Composites-A Review

Developments in the synthesis and scalable manufacturing of carbon nanomaterials like carbon nanotubes (CNTs) have been widely used in the polymer material industry over the last few decades, resulting in a series of fascinating multifunctional composites used in fields ranging from portable electronic devices, entertainment and sports to the military, aerospace, and automotive sectors. CNTs offer good thermal and electrical properties, as well as a low density and a high Young's modulus, making them suitable nanofillers for polymer composites. As mechanical reinforcements for structural applications CNTs are unique due to their nano-dimensions and size, as well as their incredible strength. Although a large number of studies have been conducted on these novel materials, there have only been a few reviews published on their mechanical performance in polymer composites. As a result, in this review we have covered some of the key application factors as well as the mechanical properties of CNTs-reinforced polymer composites. Finally, the potential uses of CNTs hybridised with polymer composites reinforced with natural fibres such as kenaf fibre, oil palm empty fruit bunch (OPEFB) fibre, bamboo fibre, and sugar palm fibre have been highlighted.

Fabrication, Functionalization, and Application of Carbon Nanotube-Reinforced Polymer Composite: An Overview

A novel class of carbon nanotube (CNT)-based nanomaterials has been surging since 1991 due to their noticeable mechanical and electrical properties, as well as their good electron transport properties. This is evidence that the development of CNT-reinforced polymer composites could contribute in expanding many areas of use, from energy-related devices to structural components. As a promising material with a wide range of applications, their poor solubility in aqueous and organic solvents has hindered the utilizations of CNTs. The current state of research in CNTs-both single-wall carbon nanotubes (SWCNT) and multiwalled carbon nanotube (MWCNT)-reinforced polymer composites-was reviewed in the context of the presently employed covalent and non-covalent functionalization. As such, this overview intends to provide a critical assessment of a surging class of composite materials and unveil the successful development associated with CNT-incorporated polymer composites. The mechanisms related to the mechanical, thermal, and electrical performance of CNT-reinforced polymer composites is also discussed. It is vital to understand how the addition of CNTs in a polymer composite alters the microstructure at the micro- and nano-scale, as well as how these modifications influence overall structural behavior, not only in its as fabricated form but also its functionalization techniques. The technological superiority gained with CNT addition to polymer composites may be advantageous, but scientific values are here to be critically explored for reliable, sustainable, and structural reliability in different industrial needs.

More serious autophagy can be induced by ZnO nanoparticles than single-walled carbon nanotubes in rat tracheal epithelial cells

Metal oxide nanoparticles and carbon nanoparticles, as common nanoparticles (NPs), can cause autophagy in certain cells, which will lead to biohealth risk issues. This study determined the difference in autophagy induced by zinc oxide nanoparticles (ZnO NPs) and single-walled carbon nanotubes (SWCNTs) in respiratory epithelial cells. ICP-OES results showed that NPs uptake as well as the intercellular contents of particles affected cytotoxicity in a dose-dependent manner. ZnO NPs-30 nm had a distinct green dot structure representing autophagy, the SWCNTs exposure group had a few green light spots at a concentration of 10 μg/L. The ROS content of the ZnO NP-30 nm exposure group had the greatest increase at a concentration of 1000 μg/L, which was 2.5 times higher than that of the control, the SWCNTs exposure group showed a 2.2-fold increase. A slight downregulation of p-mTOR was detected, and the ZnO NPs-30 nm treatment group had the significant downregulation rate. The gene and protein expression levels of Beclin-1 and LC3B were upregulated as the exposure concentration increased. The protein expression of Beclin-1 and LC3B in the 1000 μg/L ZnO NPs-30 nm exposure group were 5.21 times and 4.12 times that of the control, respectively. The mRNA expression of Beclin-1 and LC3B in the 1000 μg/L ZnO NPs-30 nm exposure group were 5.04 times and 3.61 times that of the control, respectively. At any concentration, the effect of ZnO NPs-30 nm was greater than that of the SWCNTs. Interaction and crosstalk analysis showed that exposure to ZnO NPs-30 nm caused autophagy through the aggregation of undegraded autophagosomes, whereas SWCNTs exposure induced diminished intercellular oxidative stress to inhibit autophagy. Therefore, this study demonstrated that the effects of autophagy induced by ZnO NPs-30 nm and SWCNTs were different. The health risks of ZnO-30 nm NPs are higher than those of SWCNTs.

Pleural translocation and lesions by pulmonary exposed multi-walled carbon nanotubes

Carbon nanotubes (CNTs) are recently developed tubular nanomaterials, with diameters ranging from a few nanometers to tens of nanometers, and the length reaching up to several micrometers. They can be either single-walled carbon nanotubes (SWCNTs) or multi-walled carbon nanotubes (MWCNTs). Due to their nano-scaled structure, CNTs have a unique set of mechanical, electrical, and chemical properties that make them useful in information technologies, optoelectronics, energy technologies, material sciences, medical technologies, and other fields. However, with the wide application and increasing production of CNTs, their potential risks have led to concerns regarding their impact on environment and health. The shape of some types of CNTs is similar to asbestos fibers, which suggests that these CNTs may cause characteristic pleural diseases similar to those found in asbestos-exposed humans, such as pleural plaques and malignant mesothelioma. Experimental data indicate that CNTs can induce lung and pleural lesions, inflammation, pleural fibrosis, lung tumors, and malignant mesothelioma upon inhalation in the experimental animals. In this review, we focus on the potential of MWCNTs to induce diseases similar to those by asbestos, molecular and cellular mechanisms associated with these diseases, and we discuss a method for evaluating the pleural toxicity of MWCNTs.

Cytotoxicity and genotoxicity of MWCNT-7 and crocidolite: assessment in alveolar epithelial cells versus their coculture with monocyte-derived macrophages

In the past years, several in vitro studies have addressed the pulmonary toxicity of multi-walled carbon nanotubes (MWCNT) and compared it with that caused by asbestos fibers, but their conclusions have been somewhat inconsistent and difficult to extrapolate to in vivo. Since cell coculture models were proposed to better represent the in vivo conditions than conventional monocultures, this work intended to compare the cytotoxicity and genotoxicity of MWCNT-7 (Mitsui-7) and crocidolite using A549 cells grown in a conventional monoculture or in coculture with THP-1 macrophages. Although a decrease in A549 viability was noted following exposure to a concentration range of MWCNT-7 and crocidolite, no viability change occurred in similarly exposed cocultures. Early events indicating epithelial to mesenchymal transition (EMT) were observed which could explain apoptosis resistance. The comet assay results were similar between the two models, being positive and negative for crocidolite and MWCNT-7, respectively. An increase in the micronucleus frequency was detected in the cocultured A549-treated cells with both materials, but not in the monoculture. On the other hand, exposure of A549 monocultures to MWCNT-7 induced a highly significant increase in nucleoplasmic bridges in which those were found embedded. Our overall results demonstrate that (i) both materials are cytotoxic and genotoxic, (ii) the presence of THP-1 macrophages upholds the viability of A549 cells and increases the aneugenic/clastogenic effects of both materials probably through EMT, and (iii) MWCNT-7 induces the formation of nucleoplasmic bridges in A549 cells.

Carbon nanotubes: An effective platform for biomedical electronics

Cylindrical fullerenes (or carbon nanotubes (CNTs)) have been extensively investigated as potential sensor platforms due to effective and practical manipulation of their physical and chemical properties by functionalization/doping with chemical groups suitable for novel nanocarrier systems. CNTs play a significant role in biomedical applications due to rapid development of synthetic methods, structural integration, surface area-controlled heteroatom doping, and electrical conductivity. This review article comprehensively summarized recent trends in biomedical science and technologies utilizing a promising nanomaterial of CNTs in disease diagnosis and therapeutics, based on their biocompatibility and significance in drug delivery, implants, and bio imaging. Biocompatibility of CNTs is essential for designing effective and practical electronic applications in the biomedical field particularly due to their growing potential in the delivery of anticancer agents. Furthermore, functionalized CNTs have been shown to exhibit advanced electrochemical properties, responsible for functioning of numerous oxidase and dehydrogenase based amperometric biosensors. Finally, faster signal transduction by CNTs allows charge transfer between underlying electrode and redox centres of biomolecules (enzymes).

Cellular Uptake and Delivery-Dependent Effects of Tb3+-Doped Hydroxyapatite Nanorods

With the increasing interest in hydroxyapatite (HA) nanostructures for use in biomedicine, the systematic evaluation of their potential effects on biological systems is becoming critically important. In this work, we report the in vitro cellular uptake, in vivo tissue distributions and toxicity of Tb3+-doped HA (HA-Tb) after short-, intermediate-, and long-term exposure. Transmission electron microscopy analysis indicated that HA-Tb was taken up by cells via vesicle endocytosis. Cell proliferation and cytotoxicity assay, combined with confocal laser scanning microscopy, indicated excellent cell viability with no changes in cell morphology at the examined doses. Three HA-Tb delivery methods (intraperitoneal, intragastric, and intravenous) resulted in similar time-dependent tissue distributions, while intraperitoneal injection produced the highest bioavailability. HA-Tb initially accumulated in livers and intestines of rats (4 h to one day after administration), then became increasingly distributed in the kidney and bladder (seven days), and finally decreased in all tissues after 30 to 90 days. No histopathological abnormalities or lesions related to treatment with HA-Tb were observed. These results suggest that HA-Tb has minimal in vitro and in vivo toxicity, regardless of the delivery mode, time, and dose. The findings provide a foundation for the design and development of HA for biological applications.

Saponins from stems and leaves of Panax ginseng prevent obesity via regulating thermogenesis, lipogenesis and lipolysis in high-fat diet-induced obese C57BL/6 mice

In this study, high-fat diet (HFD)-induced obesity in mouse model was used to evaluate the dietary effect of saponins from stems and leaves of Panax ginseng (SLG), and to explore its mechanism of action in producing anti-obesity effects. The results indicate that SLG showed significant anti-obesity effects in diet-induced obese mice, represented by decreased serum levels of free fatty acids (FFA), total cholesterol (TC), triglycerides (TG), low-density lipoprotein (LDL)-cholesterol, glucose, leptin and insulin, as well as a reduction in overall body and liver weight, epididymal adipose tissue weight, and food efficiency, and inhibition of abnormal increases in acyl carnitine levels normally caused by an HFD. Additionally, the down-regulated expression of PPARγ, FAS, CD36, FATP2 and up-regulated expression of CPT-1, UCP-2, PPARα, HSL, and ATGL in liver tissue was induced by SLG. In addition, the SLG groups showed decreased PPARγ, aP2 and leptin mRNA levels and increased expression of PPARα, PGC-1α, UCP-1 and UCP-3 genes in adipose tissues, compared with the HFD group. In short, SLG may play a key role in producing anti-obesity effects in mice fed an HFD, and its mechanism may be related to regulation of thermogenesis, lipogenesis and lipolysis.

Nanomedicine

Nanomedicine, an offshoot of nanotechnology, is considered as one of the most promising technologies of the 21st century. Due to their minute size, nanomedicines can easily target difficult-to-reach sites with improved solubility and bioavailability and reduced adverse effects. They also act as versatile delivery systems, carrying both chemotherapeutics and imaging agents to targeted sites. Hence, nanomedicine can be used to achieve the same therapeutic effect at smaller doses than their conventional counterparts and can offer impressive resolutions for various life-threatening diseases. Although certain issues have been raised about the potential toxicities of nanomaterials, it is anticipated that the advances in nanomedicine will furnish clarifications to many of modern medicine's unsolved problems. This chapter aims to provide a comprehensive and contemporary survey of various nanomedicine products along with the major risks and side effects associated with the nanoparticles.

Effects of feeding a diet containing Gymnema sylvestre extract: Attenuating progression of obesity in C57BL/6J mice

OBJECTIVE

To investigate the effect of Gymnema sylvestre extract (GS) on initial anti-obesity, liver injury, and glucose homeostasis induced by a high-fat diet (HFD).

METHODS

The dry powder of GS was extracted with methanol, and gymnemic acid was identified by high performance liquid chromatography as deacyl gymnemic acid. Male C57BL/6J mice that fed on either a normal diet, normal diet containing 1 g/kg GS (CON+GS), HFD, or HFD containing 1.0 g/kg GS (HFD + GS) for 4 weeks were used to test the initial anti-obesity effect of GS. Body weight gain and food intake, and serum levels about lipid and liver injury markers were measured. Histopathology of adipose tissue and liver stained with hematoxylin and eosin (H&E) and oil-red O were analyzed. After 4 weeks of GS extract feeding, intraperitoneal glucose tolerance test (IPGTT) was performed.

RESULTS

The methanol extracts of GS exerted significant anti-obesity effects in HFD + GS group. They decreased body weight gain, a lower food and energy efficiency ratio, and showed lower serum levels of total cholesterol (TC), triglyceride (TG), low-density lipoprotein (LDL)-cholesterol, very-low density lipoprotein (VLDL)-cholesterol and leptin compared with the HFD group. The decreases of abdominal as well as epididymal fat weight and adipocyte hypertrophy, lipid droplets in liver, and serum levels of aspartate aminotransferase (AST) and alanine transaminase (ALT) were also observed. The CON + GS group showed an effect of glucose homeostasis compared to the CON group.

CONCLUSIONS

This study shows that GS provide the possibility as a key role in an initial anti-obesity effects feeding with a HFD.

Inhalation Exposure to Carbon Nanotubes (CNT) and Carbon Nanofibers (CNF): Methodology and Dosimetry

Carbon nanotubes (CNT) and nanofibers (CNF) are used increasingly in a broad array of commercial products. Given current understandings, the most significant life-cycle exposures to CNT/CNF occur from inhalation when they become airborne at different stages of their life cycle, including workplace, use, and disposal. Increasing awareness of the importance of physicochemical properties as determinants of toxicity of CNT/CNF and existing difficulties in interpreting results of mostly acute rodent inhalation studies to date necessitate a reexamination of standardized inhalation testing guidelines. The current literature on pulmonary exposure to CNT/CNF and associated effects is summarized; recommendations and conclusions are provided that address test guideline modifications for rodent inhalation studies that will improve dosimetric extrapolation modeling for hazard and risk characterization based on the analysis of exposure-dose-response relationships. Several physicochemical parameters for CNT/CNF, including shape, state of agglomeration/aggregation, surface properties, impurities, and density, influence toxicity. This requires an evaluation of the correlation between structure and pulmonary responses. Inhalation, using whole-body exposures of rodents, is recommended for acute to chronic pulmonary exposure studies. Dry powder generator methods for producing CNT/CNF aerosols are preferred, and specific instrumentation to measure mass, particle size and number distribution, and morphology in the exposure chambers are identified. Methods are discussed for establishing experimental exposure concentrations that correlate with realistic human exposures, such that unrealistically high experimental concentrations need to be identified that induce effects under mechanisms that are not relevant for workplace exposures. Recommendations for anchoring data to results seen for positive and negative benchmark materials are included, as well as periods for postexposure observation. A minimum data set of specific bronchoalveolar lavage parameters is recommended. Retained lung burden data need to be gathered such that exposure-dose-response correlations may be analyzed and potency comparisons between materials and mammalian species are obtained considering dose metric parameters for interpretation of results. Finally, a list of research needs is presented to fill data gaps for further improving design, analysis, and interpretation and extrapolation of results of rodent inhalation studies to refine meaningful risk assessments for humans.

Instillation versus inhalation of multiwalled carbon nanotubes: exposure-related health effects, clearance, and the role of particle characteristics

Inhaled multiwalled carbon nanotubes (MWCNTs) may cause adverse pulmonary responses due to their nanoscale, fibrous morphology and/or biopersistance. This study tested multiple factors (dose, time, physicochemical characteristics, and administration method) shown to affect MWCNT toxicity with the hypothesis that these factors will influence significantly different responses upon MWCNT exposure. The study is unique in that (1) multiple administration methods were tested using particles from the same stock; (2) bulk MWCNT formulations had few differences (metal content, surface area/functionalization); and (3) MWCNT retention was quantified using a specialized approach for measuring unlabeled MWCNTs in rodent lungs. Male Sprague-Dawley rats were exposed to original (O), purified (P), and carboxylic acid functionalized (F) MWCNTs via intratracheal instillation and inhalation. Blood, bronchoalveolar lavage fluid (BALF), and lung tissues were collected at postexposure days 1 and 21 for quantifying biological responses and MWCNTs in lung tissues by programmed thermal analysis. At day 1, MWCNT instillation produced significant BALF neutrophilia and MWCNT-positive macrophages. Instilled O- and P-MWCNTs produced significant inflammation in lung tissues, which resolved by day 21 despite MWCNT retention. MWCNT inhalation produced no BALF neutrophilia and no significant histopathology past day 1. However, on days 1 and 21 postinhalation of nebulized MWCNTs, significantly increased numbers of MWCNT-positive macrophages were observed in BALF. Results suggest (1) MWCNTs produce transient inflammation if any despite persistence in the lungs; (2) instilled O-MWCNTs cause more inflammation than P- or F-MWCNTs; and (3) MWCNT suspension media produce strikingly different effects on physicochemical particle characteristics and pulmonary responses.

Identifying contact-mediated, localized toxic effects of MWCNT aggregates on epithelial monolayers: a single-cell monitoring toxicity assay

Aggregates of multiwalled carbon nanotubes (MWCNT) impair the barrier properties of human airway cell monolayers. To resolve the mechanism of the barrier alteration, monolayers of Calu-3 human airway epithelial cells were exposed to aggregated MWCNT. At the cell-population level, trans-epithelial electrical resistance (TEER) was used as an indicator of barrier competence, caspase activity was assessed with standard biochemical assays, and cell viability was investigated by biochemical techniques and high-throughput screening (HTS) technique based on automated epifluorescence microscopy. At cell level, the response to MWCNT was investigated with confocal microscopy, by evaluating cell death (calcein/propidium iodide (PI)), proliferation (Ki-67), and apoptosis (caspase activity). At the cell-population level, exposure to aggregated MWCNT caused a decrease in TEER, which was not associated with a decrease in cell viability or onset of apoptosis even after an 8-d exposure. In contrast, confocal imaging demonstrated contact with MWCNT aggregates triggered cell death after 24 h of exposure. In the presence of a natural surfactant, both TEER decrease and contact-mediated toxicity were mitigated. With confocal imaging, increased proliferation and apoptosis were detected in Calu-3 cells next to the aggregates. Contact-mediated cytotoxicity was recorded in two additional cell lines (BEAS-2B and A549) derived from human airways. Similar results were confirmed by adopting two additional MWCNT preparations with different physico-chemical features. This indicates MWCNT caused localized damage to airway epithelial monolayers in vitro and altered the apoptotic and proliferative rate of epithelial cells in close proximity to the aggregates. These findings provide evidence on the pathway by which MWCNT aggregates impair airway barrier function, and support the use of imaging techniques as a possible regulatory-decision supporting tool to identify effects of aggregated nanomaterials not readily detected at cell population level.

Impact of carbon nanotubes and graphene on immune cells

It has been recently proposed that nanomaterials, alone or in concert with their specific biomolecular conjugates, can be used to directly modulate the immune system, therefore offering a new tool for the enhancement of immune-based therapies against infectious disease and cancer. Here, we revised the publications on the impact of functionalized carbon nanotubes (f-CNTs), graphene and carbon nanohorns on immune cells. Whereas f-CNTs are the nanomaterial most widely investigated, we noticed a progressive increase of studies focusing on graphene in the last couple of years. The majority of the works (56%) have been carried out on macrophages, following by lymphocytes (30% of the studies). In the case of lymphocytes, T cells were the most investigated (22%) followed by monocytes and dendritic cells (7%), mixed cell populations (peripheral blood mononuclear cells, 6%), and B and natural killer (NK) cells (1%). Most of the studies focused on toxicity and biocompatibility, while mechanistic insights on the effect of carbon nanotubes on immune cells are generally lacking. Only very recently high-throughput gene-expression analyses have shed new lights on unrecognized effects of carbon nanomaterials on the immune system. These investigations have demonstrated that some f-CNTs can directly elicitate specific inflammatory pathways. The interaction of graphene with the immune system is still at a very early stage of investigation. This comprehensive state of the art on biocompatible f-CNTs and graphene on immune cells provides a useful compass to guide future researches on immunological applications of carbon nanomaterials in medicine.

Vascular Tissue Contractility Changes Following Late Gestational Exposure to Multi-Walled Carbon Nanotubes or their Dispersing Vehicle in Sprague Dawley Rats

Multi-walled carbon nanotubes (MWCNTs) are increasingly used in industry and in nanomedicine raising safety concerns, especially during unique life-stages such as pregnancy. We hypothesized that MWCNT exposure during pregnancy will increase vascular tissue contractile responses by increasing Rho kinase signaling. Pregnant (17-19 gestational days) and non-pregnant Sprague Dawley rats were exposed to 100 μg/kg of MWCNTs by intratracheal instillation or intravenous administration. Vasoactive responses of uterine, mesenteric, aortic and umbilical vessels were studied 24 hours post-exposure by wire myography. The contractile responses of the vessel segments were different between the pregnant and non-pregnant rats, following MWCNT exposure. Maximum stress generation in the uterine artery segments from the pregnant rats following pulmonary MWCNT exposure was increased in response to angiotensin II by 4.9 mN/mm² (+118%), as compared to the naïve response and by 2.6 mN/mm² (+40.7%) as compared to the vehicle exposed group. Following MWCNT exposure, serotonin induced approximately 4 mN/mm² increase in stress generation of the mesenteric artery from both pregnant and non-pregnant rats as compared to the vehicle response. A significant contribution of the dispersion medium was identified as inducing changes in the contractile properties following both pulmonary and intravenous exposure to MWCNTs. Wire myographic studies in the presence of a Rho kinase inhibitor and RhoA and Rho kinase mRNA/protein expression of rat aortic endothelial cells were unaltered following exposure to MWCNTs, suggesting absent/minimal contribution of Rho kinase to the enhanced contractile responses following MWCNT exposure. The reactivity of the umbilical vein was not changed; however, mean fetal weight gain was reduced with dispersion media and MWCNT exposure by both routes. These results suggest a susceptibility of the vasculature during gestation to MWCNT and their dispersion media-induced vasoconstriction, predisposing reduced fetal growth during pregnancy.

Potential toxicity of differential functionalized multiwalled carbon nanotubes (MWCNT) in human cell line (BEAS2B) and Caenorhabditis elegans

The aim of this study was to evaluate in vitro (human bronchial epithelial cells, BEAS2B cells) and in vivo (the nematode Caenorhabditis elegans, C. elegans) toxicity outcomes following exposure to pristine as well as surface-functionalized multiwalled carbon nanotubes (MWCNT) following hydroxylation-oxygenation (O(+)), amination (NH2), or carboxylation (COOH) of the carbon nanotubes (CNT). Cell viability and proliferation were measured by Ez-Cytox, trypan blue exclusion, and colony formation assays. The genotoxic potential of the MWCNT was determined by using the alkaline comet assay. In addition, survival and reproduction were used as endpoints for detection of toxicity of MWCNT in C. elegans. The carboxylated (COOH)-MWCNT was found most toxic as evidenced by cytotoxic and genotoxic among all tested compounds. The order of sensitivity was COOH > O(+) > NH2 > pristine. There were almost no marked changes in survival following exposure of C. elegans to MWCNT. It is of interest that only pristine MWCNT exerted significant reduction in reproductive capacity of C. elegans. Surface functionalization significantly influenced the bioactivity of MWCNT, which displayed species as well as target-organ specificity. The mechanisms underlying these specific modes of nano-biological interactions need to be elucidated.

Size-dependent effect of zinc oxide on toxicity and inflammatory potential of human monocytes

With the rapid development of nanomedicines, it is important to understand their potential immunotoxicity. Zinc oxide (ZnO) nanoparticles have several applications in the pharmaceutical and biomedicine industries. This study investigates the effect of particles size (nano and micro) of ZnO on viability, phagocytosis, and cytokine induction in human monocytes, THP-1 cells, a model of the innate immune system. Cells were incubated with nano (approximately 100 nm) and micro (approximately 5 μm) sized ZnO particles in a concentration range of 10-100 μg/ml. The parameters measured included the MTT assay, phagocytosis assay, enzyme-linked immunosorbent assay (ELISA), gene expression, and DNA analysis. ZnO particles significantly decreased cell viability in a size- and concentration-dependent manner associated with significant alterations in phagocytic capacity of monocytes. Exposure of THP-1 cells to both sizes of ZnO stimulated and increased release of proinflammatory cytokines interleukin (IL)-1β, tumor necrosis factor (TNF)-α, and IL-6, as well as chemokine IL-8, and upregulated the expression of monocyte chemoattractant protein-1 and cyclooxygenase-2 genes. However, ZnO particles did not markedly affect monocytes DNA. Collectively, these results suggest higher propensity of nano ZnO particles in inducing cytotoxicity and inflammation in human monocytes regardless of micro size, and caution needs to be taken concerning their biological application.

Helical carbon nanotubes enhance the early immune response and inhibit macrophage-mediated phagocytosis of Pseudomonas aeruginosa

Aerosolized or aspirated manufactured carbon nanotubes have been shown to be cytotoxic, cause pulmonary lesions, and demonstrate immunomodulatory properties. CD-1 mice were used to assess pulmonary toxicity of helical carbon nanotubes (HCNTs) and alterations of the immune response to subsequent infection by Pseudomonas aeruginosa in mice. HCNTs provoked a mild inflammatory response following either a single exposure or 2X/week for three weeks (multiple exposures) but were not significantly toxic. Administering HCNTs 2X/week for three weeks resulted in pulmonary lesions including granulomas and goblet cell hyperplasia. Mice exposed to HCNTs and subsequently infected by P. aeruginosa demonstrated an enhanced inflammatory response to P. aeruginosa and phagocytosis by alveolar macrophages was inhibited. However, clearance of P. aeruginosa was not affected. HCNT exposed mice depleted of neutrophils were more effective in clearing P. aeruginosa compared to neutrophil-depleted control mice, accompanied by an influx of macrophages. Depletion of systemic macrophages resulted in slightly inhibited bacterial clearance by HCNT treated mice. Our data indicate that pulmonary exposure to HCNTs results in lesions similar to those caused by other nanotubes and pre-exposure to HCNTs inhibit alveolar macrophage phagocytosis of P. aeruginosa. However, clearance was not affected as exposure to HCNTs primed the immune system for an enhanced inflammatory response to pulmonary infection consisting of an influx of neutrophils and macrophages.

Quantification of carbon nanomaterials in vivo

A diverse array of carbon nanomaterials (NMs), including fullerene, carbon nanotubes (CNTs), graphene, nanodiamonds, and carbon nanoparticles, have been discovered and widely applied in a variety of industries. Carbon NMs have been detected in the environment and have a strong possibility of entering the human body. The safety of carbon NMs has thus become a serious concern in academia and society. To achieve strict biosafety assessments, researchers need to fully understand the effects and fates of NMs in the human body, including information about absorption, distribution, metabolism, excretion, and toxicity (ADME/T). To acquire the ADME data, researchers must quantify NMs, but carbon NMs are very difficult to quantify in vivo. The carbon background in a typical biological system is high, particularly compared with the much lower concentration of carbon NMs. Moreover, carbon NMs lack a specific detection signal. Therefore, isotopic labeling, with its high sensitivity and specificity, is the first choice to quantify carbon NMs in vivo. Previously, researchers have used many isotopes, including ¹³C, ¹⁴C, ¹²⁵I, ¹³¹I, ³H, ⁶⁴Cu, ¹¹¹In, ⁸⁶Y, 99mTc, and ⁶⁷Ga, to label carbon NMs. We used these isotopic labeling methods to study the ADME of carbon NMs via different exposure pathways in animal models. Except for the metabolism of carbon NMs, which has seldom been investigated, significant amounts of data have been reported on the in vivo absorption, distribution, excretion, and toxicity of carbon NMs, which have revealed characteristic behaviors of carbon NMs, such as reticuloendothelial system (RES) capture. However, the complexity of the biological systems and diverse preparation and functionalization of the same carbon NMs have led to inconsistent results across different studies. Therefore, the data obtained so far have not provided a compatible and systematic profile of biosafety. Further efforts are needed to address these problems. In this Account, we review the in vivo quantification methods of carbon NMs, focusing on isotopic labeling and tracing methods, and summarize the related labeling, purification, bio-sampling, and detection of carbon NMs. We also address the advantages, applicable situations, and limits of various labeling and tracing methods and propose guidelines for choosing suitable labeling methods. A collective analysis of the ADME information on various carbon NMs in vivo would provide general principles for understanding the fate of carbon NMs and the effects of chemical functionalization and aggregation of carbon NMs on their ADME/T in vivo and their implications in nanotoxicology and biosafety evaluations.

Effect of multi-walled carbon nanotube surface modification on bioactivity in the C57BL/6 mouse model

The current study tests the hypothesis that multi-walled carbon nanotubes (MWCNT) with different surface chemistries exhibit different bioactivity profiles in vivo. In addition, the study examined the potential contribution of the NLRP3 inflammasome in MWCNT-induced lung pathology. Unmodified (BMWCNT) and MWCNT that were surface functionalised with -COOH (FMWCNT), were instilled into C57BL/6 mice. The mice were then examined for biomarkers of inflammation and injury, as well as examined histologically for development of pulmonary disease as a function of dose and time. Biomarkers for pulmonary inflammation included cytokines, mediators and the presence of inflammatory cells (IL-1β, IL-18, IL-33, cathepsin B and neutrophils) and markers of injury (albumin and lactate dehydrogenase). The results show that surface modification by the addition of the -COOH group to the MWCNT, significantly reduced the bioactivity and pathogenicity. The results of this study also suggest that in vivo pathogenicity of the BMWCNT and FMWCNT correlates with activation of the NLRP3 inflammasome in the lung.

Nanotechnology: toxicologic pathology

Nanotechnology involves technology, science, and engineering in dimensions less than 100 nm. A virtually infinite number of potential nanoscale products can be produced from many different molecules and their combinations. The exponentially increasing number of nanoscale products will solve critical needs in engineering, science, and medicine. However, the virtually infinite number of potential nanotechnology products is a challenge for toxicologic pathologists. Because of their size, nanoparticulates can have therapeutic and toxic effects distinct from micron-sized particulates of the same composition. In the nanoscale, distinct intercellular and intracellular translocation pathways may provide a different distribution than that obtained by micron-sized particulates. Nanoparticulates interact with subcellular structures including microtubules, actin filaments, centrosomes, and chromatin; interactions that may be facilitated in the nanoscale. Features that distinguish nanoparticulates from fine particulates include increased surface area per unit mass and quantum effects. In addition, some nanotechnology products, including the fullerenes, have a novel and reactive surface. Augmented microscopic procedures including enhanced dark-field imaging, immunofluorescence, field-emission scanning electron microscopy, transmission electron microscopy, and confocal microscopy are useful when evaluating nanoparticulate toxicologic pathology. Thus, the pathology assessment is facilitated by understanding the unique features at the nanoscale and the tools that can assist in evaluating nanotoxicology studies.

Differential toxic responses between pristine and functionalized multiwall nanotubes involve induction of autophagy accumulation in murine lung

Carbon nanotubes (CNT) are becoming commonly used in industrial applications. However, the toxicity associated with this material remains to be established. The aim of this study was to investigate the potential toxic mechanisms associated with multiwall carbon nanotubes (MWCNT) in normal mouse lung. A total of 100 μg of two types of MWCNT, namely, pristine MWCNT (PMWCNT) and acid-treated-MWCNT (TMWCNT), was administered to male C57BL/6 mice via intratracheal (IT) instillation for a period of 6 mo. Our results indicated that PMWCNT induced pulmonary autophagy accumulation and resulted in more potent tumorigenic effects compared to TMWCNT. Accordingly, MWCNT may exert differential toxicity attributed to various physicochemical properties. Data emphasize the need for careful regulation of production and use of CNT.

The role of iron impurities in the toxic effects exerted by short multiwalled carbon nanotubes (MWCNT) in murine alveolar macrophages

Lung toxicity mediated by multiwalled carbon nanotubes (MWCNT) has been widely demonstrated and recently associated with induction of carcinogenic asbestos-like effects, but the chemical features that drive this toxic effect have still not been well elucidated. The presence of metals as trace contaminants during MWCNT preparation, in particular iron (Fe) impurities, plays an important role in determining a different cellular response to MWCNT. Our goal was to clarify the mechanisms underlying MWCNT-induced toxicity with correlation to the presence of Fe impurities by exposing murine alveolar macrophages to two different MWCNT samples, which differed only in the presence or absence of Fe. Data showed that only Fe-rich MWCNT were significantly cytotoxic and genotoxic and induced a potent cellular oxidative stress, while Fe-free MWCNT did not exert any of these adverse effects. These results confirm that Fe content represents an important key constituent in promoting MWCNT-induced toxicity, and this needs to be taken into consideration when planning new, safer preparation routes.

Multi-walled carbon nanotube-induced inflammatory response and oxidative stress in a dynamic cell growth environment

BACKGROUND

Rapid increase in multi-walled carbon nanotube (MWCNT) production for their industrial and biomedical applications has led to concerns over the effects of MWCNTs on human health and the environment. Both animal and in vitro studies have provided important findings about MWCNT-induced effects on the lung cells or tissues. In vitro studies have provided a considerable amount of fundamental information on MWCNT-induced effects on the specific lung cells. However, the cell culture systems used in those studies were limited by the absence of dynamic nature of lung tissues. We hypothesized that MWCNT-induced cellular responses such as proliferation, inflammation, and oxidative stress under dynamic cell growth environment may differ from those under static cell growth environment.

RESULTS

In this study, we used a dynamic cell growth condition to mimic mechanically dynamic environment of the lung and characterized interleukin 8 (IL-8), reactive oxygen species (ROS), glutathione (GSH), and cell proliferation for three days following exposure of MWCNTs at different concentrations (5, 10, and 20 μg/ml) to A549 cell monolayer under both static and dynamic cell growth conditions. Our results demonstrated the distinct differences in the levels of inflammatory response and oxidative stress between static and dynamic cell growth conditions.

CONCLUSIONS

In conclusion, the dynamic cell growth system used in this study provided important changes in cellular responses that were not found in the static cell growth system and were similar to animal studies. The dynamic cell growth system can be considered as a viable alternative to in vivo test system in combination with existing in vitro static cell growth systems to evaluate the effect of MWCNTs on cellular responses in the respiratory system.

Impairment of coronary arteriolar endothelium-dependent dilation after multi-walled carbon nanotube inhalation: a time-course study

Engineered nanomaterials have been developed for widespread applications due to many highly unique and desirable characteristics. The purpose of this study was to assess pulmonary inflammation and subepicardial arteriolar reactivity in response to multi-walled carbon nanotube (MWCNT) inhalation and evaluate the time course of vascular alterations. Rats were exposed to MWCNT aerosols producing pulmonary deposition. Pulmonary inflammation via bronchoalveolar lavage and MWCNT translocation from the lungs to systemic organs was evident 24 h post-inhalation. Coronary arterioles were evaluated 24-168 h post-exposure to determine microvascular response to changes in transmural pressure, endothelium-dependent and -independent reactivity. Myogenic responsiveness, vascular smooth muscle reactivity to nitric oxide, and α-adrenergic responses all remained intact. However, a severe impact on endothelium-dependent dilation was observed within 24 h after MWCNT inhalation, a condition which improved, but did not fully return to control after 168 h. In conclusion, results indicate that MWCNT inhalation not only leads to pulmonary inflammation and cytotoxicity at low lung burdens, but also a low level of particle translocation to systemic organs. MWCNT inhalation also leads to impairments of endothelium-dependent dilation in the coronary microcirculation within 24 h, a condition which does not fully dissipate within 168 h. The innovations within the field of nanotechnology, while exciting and novel, can only reach their full potential if toxicity is first properly assessed.

Multi-walled carbon nanotube directed gene and protein expression in cultured human aortic endothelial cells is influenced by suspension medium

The use and production of multi-walled carbon nanotubes (MWCNTs) have significantly increased over the last decade due to their versatility in numerous applications. Their unique physical and chemical properties make them desirable for various biomedical applications, but the same properties also raise concerns about their safety to human health, particularly at the cellular level. The vascular endothelium could be exposed to nanomaterials either by direct intravenous administration in nanomedicine or by translocation following inhalational exposure in an occupational setting. We hypothesized that direct exposure to MWCNTs will increase the expression of inflammatory markers in human aortic endothelial cells (HAEC). We also investigated the effect of the route of exposure on activation by changing the suspension medium of the MWCNTs. HAEC were treated in vitro with MWCNTs (1 or 10 μg/cm(2)) suspended in either cell culture medium [(M)-MWCNTs] or 10% clinical grade pulmonary surfactant [(S)-MWCNTs]. The zeta potential of the (S)-MWCNTs was significantly more negative than the (M)-MWCNTs suggesting a more stable suspension. Treatment of HAEC with (S)-MWCNTs; as compared to (M)-MWCNTs resulted in a significantly higher up-regulation of mRNA transcripts for cell adhesion molecules VCAM1, SELE, ICAM1 and the chemokine CCL2. Time dependent changes in VCAM1 and CCL2 protein levels were confirmed by immunofluorescence, flow cytometry and ELISA. A label free quantitative mass spectrometry proteomic analysis was utilized to compare protein expression patterns between the two suspensions of MWCNTs. We identified significant expression changes in >200 unique proteins in MWCNT treated HAEC. However, the two suspensions of MWCNTs resulted in different protein expression patterns with the eIF2 pathway as the only common pathway identified between the two suspensions. These data suggest that direct exposure to MWCNTs induces acute inflammatory and protein expression changes in HAEC, which is influenced by the type of media used for suspension of MWCNTs and their resulting zeta potential.

Multiwalled carbon nanotube-induced gene signatures in the mouse lung: potential predictive value for human lung cancer risk and prognosis

Concerns over the potential for multiwalled carbon nanotubes (MWCNT) to induce lung carcinogenesis have emerged. This study sought to (1) identify gene expression signatures in the mouse lungs following pharyngeal aspiration of well-dispersed MWCNT and (2) determine if these genes were associated with human lung cancer risk and progression. Genome-wide mRNA expression profiles were analyzed in mouse lungs (n = 160) exposed to 0, 10, 20, 40, or 80 μg of MWCNT by pharyngeal aspiration at 1, 7, 28, and 56 d postexposure. By using pairwise statistical analysis of microarray (SAM) and linear modeling, 24 genes were selected, which have significant changes in at least two time points, have a more than 1.5-fold change at all doses, and are significant in the linear model for the dose or the interaction of time and dose. Additionally, a 38-gene set was identified as related to cancer from 330 genes differentially expressed at d 56 postexposure in functional pathway analysis. Using the expression profiles of the cancer-related gene set in 8 mice at d 56 postexposure to 10 μg of MWCNT, a nearest centroid classification accurately predicts human lung cancer survival with a significant hazard ratio in training set (n = 256) and test set (n = 186). Furthermore, both gene signatures were associated with human lung cancer risk (n = 164) with significant odds ratios. These results may lead to development of a surveillance approach for early detection of lung cancer and prognosis associated with MWCNT in the workplace.

The primacy of physicochemical characterization of nanomaterials for reliable toxicity assessment: a review of the zebrafish nanotoxicology model

Engineered nanomaterials (ENMs) have become increasingly prevalent in the past two decades in academic, medical, commercial, and industrial settings. The unique properties imbued with nanoparticles, as the physiochemical properties change from the bulk material to the surface atoms, present unique and often challenging characteristics that larger macromolecules do not possess. While nanoparticle characteristics are indeed exciting for unique chemistries, surface properties, and diverse applications, reports of toxicity and environmental impacts have tempered this enthusiasm and given cause for an exponential increase for concomitant nanotoxicology assessment. Currently, nanotoxicology is a steadily growing with new literature and studies being published more frequently than ever before; however, the literature reveals clear, inconsistent trends in nanotoxicological assessment. At the heart of this issue are several key problems including the lack of validated testing protocols and models, further compounded by inadequate physicochemical characterization of the nanomaterials in question and the seminal feedback loop of chemistry to biology back to chemistry. Zebrafish (Danio rerio) are emerging as a strong nanotoxicity model of choice for ease of use, optical transparency, cost, and high degree of genomic homology to humans. This review attempts to amass all contemporary nanotoxicology studies done with the zebrafish and present as much relevant information on physicochemical characteristics as possible. While this report is primarily a physicochemical summary of nanotoxicity studies, we wish to strongly emphasize that for the proper evolution of nanotoxicology, there must be a strong marriage between the physical and biological sciences. More often than not, nanotoxicology studies are reported by groups dominated by one discipline or the other. Regardless of the starting point, nanotoxicology must be seen as an iterative process between chemistry and biology. It is our sincere hope that the future will introduce a paradigm shift in the approach to nanotoxicology with multidisciplinary groups for data analysis to produce predictive and correlative models for the end goal of rapid preclinical development of new therapeutics into the clinic or insertion into environmental protection.

Magnetic nanoparticles: an update of application for drug delivery and possible toxic effects

Magnetic nanoparticles (MNPs) represent a subclass within the overall category of nanomaterials and are widely used in many applications, particularly in the biomedical sciences such as targeted delivery of drugs or genes, in magnetic resonance imaging, and in hyperthermia (treating tumors with heat). Although the potential benefits of MNPs are considerable, there is a distinct need to identify any potential toxicity associated with these MNPs. The potential of MNPs in drug delivery stems from the intrinsic properties of the magnetic core combined with their drug loading capability and the biomedical properties of MNPs generated by different surface coatings. These surface modifications alter the particokinetics and toxicity of MNPs by changing protein-MNP or cell-MNP interactions. This review contains current advances in MNPs for drug delivery and their possible organ toxicities associated with disturbance in body iron homeostasis. The importance of protein-MNP interactions and various safety considerations relating to MNP exposure are also addressed.

Biological toxicity and inflammatory response of semi-single-walled carbon nanotubes

The toxicological studies on carbon nanotubes (CNTs) have been urgently needed from the emerging diverse applications of CNTs. Physicochemical properties such as shape, diameter, conductance, surface charge and surface chemistry of CNTs gained during manufacturing processes play a key role in the toxicity. In this study, we separated the semi-conductive components of SWCNTs (semi-SWCNTs) and evaluated the toxicity on days 1, 7, 14 and 28 after intratracheal instillation in order to determine the role of conductance. Exposure to semi-SWCNTs significantly increased the growth of mice and significantly decreased the relative ratio of brain weight to body weight. Recruitment of monocytes into the bloodstream increased in a time-dependent manner, and significant hematological changes were observed 28 days after exposure. In the bronchoalveolar lavage (BAL) fluid, secretion of Th2-type cytokines, particularly IL-10, was more predominant than Th1-type cytokines, and expression of regulated on activation normal T cell expressed and secreted (RANTES), p53, transforming growth factor (TGF)-β, and inducible nitric oxide synthase (iNOS) increased in a time-dependent manner. Fibrotic histopathological changes peaked on day 7 and decreased 14 days after exposure. Expression of cyclooxygenase-2 (COX-2), mesothelin, and phosphorylated signal transducer and activator of transcription 3 (pSTAT3) also peaked on day 7, while that of TGF-β peaked on days 7 and 14. Secretion of histamine in BAL fluid decreased in a time-dependent manner. Consequently, we suggest that the brain is the target organ of semi-SWCNTs brought into the lung, and conductance as well as length may be critical factors affecting the intensity and duration of the inflammatory response following SWCNT exposure.

Multi-walled carbon nanotube-induced gene expression in the mouse lung: association with lung pathology

Due to the fibrous shape and durability of multi-walled carbon nanotubes (MWCNT), concerns regarding their potential for producing environmental and human health risks, including carcinogenesis, have been raised. This study sought to investigate how previously identified lung cancer prognostic biomarkers and the related cancer signaling pathways are affected in the mouse lung following pharyngeal aspiration of well-dispersed MWCNT. A total of 63 identified lung cancer prognostic biomarker genes and major signaling biomarker genes were analyzed in mouse lungs (n=80) exposed to 0, 10, 20, 40, or 80μg of MWCNT by pharyngeal aspiration at 7 and 56days post-exposure using quantitative PCR assays. At 7 and 56days post-exposure, a set of 7 genes and a set of 11 genes, respectively, showed differential expression in the lungs of mice exposed to MWCNT vs. the control group. Additionally, these significant genes could separate the control group from the treated group over the time series in a hierarchical gene clustering analysis. Furthermore, 4 genes from these two sets of significant genes, coiled-coil domain containing-99 (Ccdc99), muscle segment homeobox gene-2 (Msx2), nitric oxide synthase-2 (Nos2), and wingless-type inhibitory factor-1 (Wif1), showed significant mRNA expression perturbations at both time points. It was also found that the expression changes of these 4 overlapping genes at 7days post-exposure were attenuated at 56days post-exposure. Ingenuity Pathway Analysis (IPA) found that several carcinogenic-related signaling pathways and carcinogenesis itself were associated with both the 7 and 11 gene signatures. Taken together, this study identifies that MWCNT exposure affects a subset of lung cancer biomarkers in mouse lungs.

Toxicology of nanomaterials used in nanomedicine

With the development of nanotechnology, nanomaterials are being widely used in many industries as well as in medicine and pharmacology. Despite the many proposed advantages of nanomaterials, increasing concerns have been expressed on their potential adverse human health effects. In recent years, application of nanotechnology in medicine has been defined as nanomedicine. Techniques in nanomedicine make it possible to deliver therapeutic agents into targeted specific cells, cellular compartments, tissues, and organs by using nanoparticulate carriers. Because nanoparticles possess different physicochemical properties than their fine-sized analogues due to their extremely small size and large surface area, they need to be evaluated separately for toxicity and adverse health effects. In addition, in the field of nanomedicine, intravenous and subcutaneous injections of nanoparticulate carriers deliver exogenous nanoparticles directly into the human body without passing through the normal absorption process. These nanoparticulate carriers themselves may be responsible for toxicity and interaction with biological macromolecules within the human body. Second, insoluble nanoparticulate carriers may accumulate in human tissues or organs. Therefore, it is necessary to address the potential health and safety implications of nanomaterials used in nanomedicine. Toxicological studies for biosafety evaluation of these nanomaterials will be important for the continuous development of nanomedical science. This review summarizes the current knowledge on toxicology of nanomaterials, particularly on those used in nanomedicine.