Green synthesis of zinc oxide nanoparticles using different plant extracts and their antibacterial activity against Xanthomonas oryzae pv. oryzae

Comparative investigation of tellurium-doped transition metal nanoparticles (Zn, Sn, Mn): Unveiling their superior photocatalytic and antibacterial activity

In this study, tellurium-doped and undoped metal oxide nanoparticles (NPs) (ZnO, Mn3O4, SnO2) are compared, and a practical method for their synthesis is presented. Nanocomposites were created using the coprecipitation process, and comparisons between the three material categories under study were made using a range of characterization methods. The produced materials were subjected to structural, morphological, elemental composition, and functional group analyses using XRD, FESEM in combination with EDS, and FTIR. The optical characteristics in terms of cutoff wavelength were evaluated using UV-visible spectroscopy. Catalyzing the breakdown of methylene blue (MB) dye, the isolated nanocomposites demonstrated very consistent behavior when utilized as catalysts. Regarding both doped and undoped ZnO NPs, the maximum percentage of degradation was found to be 98% when exposed to solar Escherichia coli and Staphylococcus aureus, which stand for gram-positive and gram-negative bacteria, respectively, and were chosen as model strains for both groups using the disk diffusion technique in the context of in vitro antibacterial testing. Doped and undoped ZnO NPs exhibited greater antibacterial efficacy, with significant inhibition zones measuring 31.5 and 37.8 mm, compared with other metal oxide NPs.

Termiticidal Effects and Morpho-Histological Alterations in the Subterranean Termite (Odontotermes formosanus) Induced by Biosynthesized Zinc Oxide, Titanium Dioxide, and Chitosan Nanoparticles

Recently, nanoparticles have been widely used in agricultural pest control as a secure substitute for pesticides. However, the effect of nanoparticles on controlling the subterranean termite Odontotermes formosanus (O. formosanus) has not been studied yet. Consequently, this study aimed to evaluate the effectiveness of some nanomaterials in controlling O. formosanus. The results showed that zinc oxide nanoparticles (ZnONPs), titanium dioxide nanoparticles (TiO2NPs), and chitosan nanoparticles (CsNPs) biosynthesized using the culture filtrate of Scedosporium apiospermum (S. apiospermum) had an effective role in controlling O. formosanus. Moreover, the mortality rate of O. formosanus after 48 h of treatment with ZnONPs, TiO2NPs, and CsNPs at a 1000 µg/mL concentration was 100%, 100%, and 97.67%, respectively. Furthermore, using ZnONPs, TiO2NPs, and CsNPs on O. formosanus resulted in morpho-histological variations in the normal structure, leading to its death. X-ray diffraction, UV-vis spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, dynamic light scattering, energy dispersive spectroscopy, and the Zeta potential were used to characterize the biosynthesis of ZnONPs, TiO2NPs, and CsNPs with strong activity against O. formosanus termites. Overall, the results of this investigation suggest that biosynthesized ZnONPs, TiO2NPs, and CsNPs have enormous potential for use as innovative, ecologically safe pesticides for O. formosanus control.

Suppression of Root Rot Fungal Diseases in Common Beans (Phaseolus vulgaris L.) through the Application of Biologically Synthesized Silver Nanoparticles

The biosynthesis of silver nanoparticles (AgNPs) using plant extracts has become a safe replacement for conventional chemical synthesis methods to fight plant pathogens. In this study, the antifungal activity of biosynthesized AgNPs was evaluated both in vitro and under greenhouse conditions against root rot fungi of common beans (Phaseolus vulgaris L.), including Macrophomina phaseolina, Pythium graminicola, Rhizoctonia solani, and Sclerotium rolfsii. Among the eleven biosynthesized AgNPs, those synthesized using Alhagi graecorum plant extract displayed the highest efficacy in suppressing those fungi. The findings showed that using AgNPs made with A. graecorum at a concentration of 100 μg/mL greatly slowed down the growth of mycelium for R. solani, P. graminicola, S. rolfsii, and M. phaseolina by 92.60%, 94.44%, 75.93%, and 79.63%, respectively. Additionally, the minimum inhibitory concentration (75 μg/mL) of AgNPs synthesized by A. graecorum was very effective against all of these fungi, lowering the pre-emergence damping-off, post-emergence damping-off, and disease percent and severity in vitro and greenhouse conditions. Additionally, the treatment with AgNPs led to increased root length, shoot length, fresh weight, dry weight, and vigor index of bean seedlings compared to the control group. The synthesis of nanoparticles using A. graecorum was confirmed using various physicochemical techniques, including UV spectroscopy, Fourier-transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) analysis. Collectively, the findings of this study highlight the potential of AgNPs as an effective and environmentally sustainable approach for controlling root rot fungi in beans.

Evaluation of Antimicrobial and Cytotoxic Activity of Nanoformulated Chamomile and Green Tea-Based Mouthwash: An In Vitro Study

Introduction Nanotechnology plays a significant role in the biomedical and dental fields, offering numerous benefits to humans. Particularly, nanoparticles synthesised through green methods involving herbal formulations present promising advantages. Zinc oxide nanoparticles (ZnONPs) demonstrate strong antibacterial properties. Utilising treatments incorporating chamomile tea and green tea may potentially reduce toxicity while enhancing antibacterial effectiveness against oral infections. This study aimed to develop a mouthwash containing ZnONPs, followed by an evaluation of both its cytotoxicity and antibacterial effectiveness. Materials and methods This study was conducted at Saveetha Dental College, Saveetha Institute of Medical and Technical Science, Chennai, India. In the synthesis of ZnONPs, a formulation consisting of chamomile tea and green tea was employed. Subsequently, these synthesised nanoparticles were used in the preparation of mouthwash. An antimicrobial test of the produced ZnONPs was carried out using the agar well diffusion technique for oral pathogens. For analysis of cytotoxicity, brine shrimps were used in an assay, and comparisons were made with a commercially available mouthwash. Results The antimicrobial properties were assessed, and the formulated mouthwash demonstrated a zone of inhibition of Staphylococcus aureus (20 mm), Enterococcus faecalis (11 mm), Streptococcus mutans (15 mm) and Candida albicans (13 mm), when the agar well diffusion assay was carried out. Furthermore, the formulated mouthwash exhibited lower cytotoxicity compared to the commercially available mouthwash when cytotoxicity was checked in brine shrimps. Conclusion In our study, the ZnONP synthesis with chamomile tea and green tea showed notable antibacterial and antifungal effects. In addition, lower toxicity was observed compared to the commercially available mouthwash. These findings suggest that mouthwash formulated with green-synthesis ZnONPs could serve as a viable alternative to synthetic mouthwash options. As a result, it is suggested that ZnONPs could be employed in mouthwash formulations at concentrations of 40 µL.

Green synthesis of nanomaterials by using plant extracts as reducing and capping agents

An alternative method to conventional synthesis is examined in this review by the use of plant extracts as reducing and capping agents. The use of plant extracts represents an economically viable and environmentally friendly alternative to conventional synthesis. In contrast to previous reviews, this review focuses on the synthesis of nano-compounds utilizing plant extracts, which lack comprehensive reports. In order to synthesize diverse nanostructures, researchers have discovered a sustainable and cost-effective method of harnessing functional groups in plant extracts. Each plant extract is discussed in detail, along with its potential applications, demonstrating the remarkable morphological diversity achieved by using these green synthesis approaches. A reduction and capping agent made from plant extracts is aligned with the principles of green chemistry and offers economic advantages as well as paving the way for industrial applications. In this review, it is discussed the significance of using plant extracts to synthesize nano-compounds, emphasizing their potential to shape the future of nanomaterials in a sustainable and ecologically friendly manner.

Algal macromolecular mediated synthesis of nanoparticles for their application against citrus canker for food security

Citrus canker is a disease of economic importance and there are limited biocontrol agents available to mitigate it in an integrated manner. This study was conducted to combat citrus canker disease using biologically active nanoparticles (Ag, Cu and ZnO and 300, 900, 1200, and 1500 ppm) synthesized from macromolecules extracted from alga, Oedogonium sp. The synthesis of the nanoparticles was confirmed by UV-Vis Spectroscopy, FTIR, SEM, XRD, and DLS Zeta sizer while their efficacy was tested against Xanthomonas citri by measuring zone of inhibition. Results indicated that Ag and Cu nanoparticles at 1200 ppm exhibit the highest activity against Xanthomonas citri, followed by ZnO at 1500 ppm. The minimum inhibitory concentrations (MIC) of Ag, Cu and ZnO NPs were 1, 2 and 10 mg mL-1, respectively while minimum bactericidal concentrations (MBC) were for Ag and Cu 2, 4 mg mL-1 and for ZnO NPs more then 10 mg mL-1, were required to kill the X. citri. Bacterial growth respectively. Macromolecules extracted from algal sources can produce nanoparticles with bactericidal potential, in the order of Ag > Cu > ZnO to mitigate citrus canker disease and ensuring sustainable food production amid the growing human population.

Nickel oxide nanoparticles: A new generation nanoparticles to combat bacteria Xanthomonas oryzae pv. oryzae and enhance rice plant growth

Recently, nanotechnology is among the most promising technologies used in all areas of research. The production of metal nanoparticles using plant parts has received significant attention for its environmental friendliness and effectiveness. Therefore, we investigated the possible applications of biological synthesized nickel oxide nanoparticles (NiONPs). In this study, NiONPs were synthesized through biological method using an aqueous extract of saffron stigmas (Crocus sativus L). The structure, morphology, purity, and physicochemical properties of the obtained NPs were confirmed through Scanning/Transmission Electron Microscopy attached with Energy Dispersive Spectrum, X-ray Diffraction, and Fourier transform infrared. The spherically shaped NiONPs were found by Debye Scherer's formula to have a mean dimension of 41.19 nm. The application of NiONPs in vitro at 50, 100, and 200 μg/mL, respectively, produced a clear region of 2.0, 2.2, and 2.5 cm. Treatment of Xoo cell with NiONPs reduced the growth and biofilm formation, respectively, by 88.68% and 83.69% at 200 μg/mL. Adding 200 μg/mL NiONPs into Xoo cells produced a significant amount of ROS in comparison with the control. Bacterial apoptosis increased dramatically from 1.05% (control) to 99.80% (200 μg/mL NiONPs). When compared to the control, rice plants treated with 200 μg/mL NiONPs significantly improved growth characteristics and biomass. Interestingly, the proportion of diseased leaf area in infected plants with Xoo treated with NiONPs reduced to 22% from 74% in diseased plants. Taken together, NiONPs demonstrates its effectiveness as a promising tool as a nano-bactericide in managing bacterial infection caused by Xoo.

Recent advancements in sustainable synthesis of zinc oxide nanoparticles using various plant extracts for environmental remediation

The sustainable synthesis of zinc oxide nanoparticles (ZnO-NPs) using plant extracts has gained significant attention in recent years due to its eco-friendly nature and potential applications in numerous fields. This synthetic approach reduces the reliance on non-renewable resources and eliminates the need for hazardous chemicals, minimizing environmental pollution and human health risks. These ZnO-NPs can be used in environmental remediation applications, such as wastewater treatment or soil remediation, effectively removing pollutants and improving overall ecosystem health. These NPs possess a high surface area and band gap of 3.2 eV, can produce both OH° (hydroxide) and O2-° (superoxide) radicals for the generation of holes (h+) and electrons (e-), resulting in oxidation and reduction of the pollutants in their valence band (VB) and conduction band (CB) resulting in degradation of dyes (95-100% degradation of MB, MO, and RhB dyes), reduction and removal of heavy metal ions (Cu2+, Pb2+, Cr6+, etc.), degradation of pharmaceutical compounds (paracetamol, urea, fluoroquinolone (ciprofloxacin)) using photocatalysis. Here, we review an overview of various plant extracts used for the green synthesis of ZnO NPs and their potential applications in environmental remediation including photocatalysis, adsorption, and heavy metal remediation. This review summarizes the most recent studies and further research perspectives to explore their applications in various fields.

Copper oxide nanoparticles: an effective suppression tool against bacterial leaf blight of rice and its impacts on plants

BACKGROUND

To address the challenges of food security for the ever-increasing population, the emergence of nanotechnology provides an alternate technology of choice for the production of safer pesticides which serves as a substitute for conventional fertilizer. The antidrug resistance of Xanthomonas oryzae pv. oryzae (Xoo) and build-up of chemicals in the environment has made it necessary to find alternative safe techniques for effective disease management. Hence, in this study, copper oxide nanoparticles (CuONPs) were produced by green synthesis using a Hibiscus rosa-sinensis L. flower extract.

RESULTS

The characterization of CuONPs using ultraviolet-visible spectrophotometry, scanning electron microscopy with an energy-dispersive spectrum profile, Fourier transform infrared spectroscopy, and X-ray diffraction ascertained the presence of CuONPs, which were nanorods of 28.1 nm. CuONPs significantly obstructed the growth and biofilm development of Xoo by 79.65% and 79.17% respectively. The antibacterial mechanism of CuONPs was found to result from wounding the cell membrane, giving rise to an exodus of intracellular content and generation of oxidative reactive oxygen species that invariably inhibited Xoo respiration and growth. A toxicity study under greenhouse conditions revealed that CuONPs significantly increased growth variables and the biomass of rice, and reduced bacterial leaf blight. Application of CuONPs on Arabidopsis improved the chlorophyll fluorescence parameters; the ΦPSII was significantly increased by 152.05% in comparison to the control.

CONCLUSION

Altogether, these results suggest that CuONPs in low concentration (200.0 μg mL-1 ) are not toxic to plants and can serve as nano-fertilizers and nano-pesticides. © 2023 Society of Chemical Industry.

Zinc oxide nanoparticles functionalized with cinnamic acid for targeting dental pathogens receptor and modulating apoptotic genes in human oral epidermal carcinoma KB cells

BACKGROUND

Oral diseases are often attributed to dental pathogens such as S. aureus, S. mutans, E. faecalis, and C. albicans. In this research work, a novel approach was employed to combat these pathogens by preparing zinc oxide nanoparticles (ZnO NPs) capped with cinnamic acid (CA) plant compounds.

METHODS

The synthesized ZnO-CA NPs were characterized using SEM, FTIR, and XRD to validate their composition and structural features. The antioxidant activity of ZnO-CA NPs was confirmed using DPPH and ABTS free radical scavenging assays. The antimicrobial effects of ZnO-CA NPs were validated using a zone of inhibition assay against dental pathogens. Autodock tool was used to identify the interaction of cinnamic acid with dental pathogen receptors.

RESULTS

ZnO-CA NPs exhibited potent antioxidant activity in both DPPH and ABTS assays, suggesting their potential as powerful antioxidants. The minimal inhibitory concentration of ZnO-CA NPs against dental pathogens was found 25 µg/mL, indicating their effective antimicrobial properties. Further, ZnO-CA NPs showed better binding affinity and amino acid interaction with dental pathogen receptors. Also, the ZnO-CA NPs exhibited dose-dependent (5 µg/mL, 15 µg/mL, 25 µg/mL, and 50 µg/mL) anticancer activity against Human Oral Epidermal Carcinoma KB cells. The mechanism of action of apoptotic activity of ZnO-CA NPs on the KB cells was identified through the upregulation of BCL-2, BAX, and P53 genes.

CONCLUSIONS

This research establishes the potential utility of ZnO-CA NPs as a promising candidate for dental applications. The potent antioxidant, anticancer, and effective antimicrobial properties of ZnO-CA NPs make them a valuable option for combating dental pathogens.

A GH19 lysozyme and peptidase from Myoviridae cyanophages lacking the typical holin-endolysin system exhibit lytic activity

Most of the dsDNA cyanophages employ holin-endolysin lysis systems to damage the host cells. This study aimed to elucidate the lytic activity of ORF91 and ORF117 in the cyanophage MaMV-DH01, which lacked a conventional cholinesterase system. These two proteins contained Lyz-like superfamily domains and were annotated as a member of GH family 19 (named DHGH19) and peptidase (named DHpeptidase), respectively. Overexpression of DHGH19 in E. coli over a 5 h course demonstrated potent bactericidal activity, evident from significant growth inhibition, membrane damage, and leakage of intracellular enzymes of E. coli cells. However, the lytic activity of DHpeptidase was relatively weaker, exhibiting a bacteriostatic effect. It was important to highlight that the specific mutation of enzyme-catalyzed residues in DHGH19 (E122 and E131) showed that these were the essential amino acids for DHGH19 to exert its bactericidal activity. Furthermore, the lytic function of DHGH19 and DHpeptidase on cyanobacteria cells was confirmed by their overexpression in the cyanobacterium Synechocystis sp. PCC6803. Overall, this study provides novel insights into the lytic mechanism of Myoviridae cyanophage, offering potential alternatives for the development of GH19 and peptidase as new antibacterial agents in the future.

Preparation of a Herbal Mouthwash With Lemongrass and Mint-Mediated Zinc Oxide Nanoparticles and Evaluation of Its Antimicrobial and Cytotoxic Properties

Introduction Nanotechnology holds considerable importance in biomedical and dental applications. Nanoparticles synthesized using green synthesis methods with herbal formulations offer various benefits to humans. Zinc oxide nanoparticles (ZnONPs), being semiconductors, exhibit potent antibacterial properties. Notably, treatments utilizing lemongrass and mint ensure potentially lower toxicity and antibacterial qualities for oral infections. The goal of the study is to prepare a mouthwash mediated by ZnONPs and assess its cytotoxic potential and antibacterial efficacy. Materials and methods A lemongrass and mint formulation was used in the synthesis of ZnONPs, and the mouthwash was prepared using the synthesized nanoparticles. The produced ZnONPs were tested for their antimicrobial activity using agar well diffusion technique against oral pathogens, and the ZnONPs-mediated mouthwash was evaluated for its cytotoxic effect using the brine shrimp lethality assay and compared to commercial mouthwash.  Results The green-synthesized ZnONPs were initially confirmed using a UV-visible spectrophotometer and exhibited a maximum peak at 362 nm. The antimicrobial activity was tested for the synthesized ZnONPs against oral pathogens, which showed a maximum zone of inhibition of 22 mm in Enterococcus faecalis and 23 mm in Candida albicans, as estimated by the agar well diffusion technique. Additionally, ZnONPs-based herbal mouthwash demonstrated lower cytotoxicity than the commercial mouthwash in the brine shrimp lethality assay. Conclusion In the current study, lemongrass and mint-mediated ZnONPs demonstrated an effective antibacterial activity against E. faecalis and antifungal activity against C. albicans. Furthermore, the cytotoxic effect tested using the brine shrimp lethality assay for ZnONPs-mediated mouthwash demonstrated lower toxicity as compared to the commercial mouthwash. This suggests that the green-synthesized ZnONPs-based mouthwash could be used as an alternative to synthetic mouthwash.

Marine-derived κ-carrageenan-coated zinc oxide nanoparticles for targeted drug delivery and apoptosis induction in oral cancer

BACKGROUND

Kappaphycus alvarezii, a marine red algae species, has gained significant attention in recent years due to its versatile bioactive compounds. Among these, κ-carrageenan (CR), a sulfated polysaccharide, exhibits remarkable antimicrobial properties. This study emphasizes the synergism attained by functionalizing zinc oxide nanoparticles (ZnO NPs) with CR, thereby enhancing its antimicrobial efficacy and target specificity against dental pathogens.

METHODS

In this study, we synthesized ZnO-CR NPs and characterized them using SEM, FTIR, and XRD techniques to authenticate their composition and structural attributes. Moreover, our investigation revealed that ZnO-CR NPs possess better free radical scavenging capabilities, as evidenced by their effective activity in the DPPH and ABTS assay.

RESULTS

The antimicrobial properties of ZnO-CR NPs were systematically assessed using a zone of inhibition assay against dental pathogens of S. aureus, S. mutans, E. faecalis, and C. albicans, demonstrating their substantial inhibitory effects at a minimal concentration of 50 μg/mL. We elucidated the interaction between CR and the receptors of dental pathogens to further understand their mechanism of action. The ZnO-CR NPs demonstrated a dose-dependent anticancer effect at concentrations of 5 μg/mL, 25 μg/mL, 50 μg/mL, and 100 μg/mL on KB cells, a type of Human Oral Epidermal Carcinoma. The mechanism by which ZnO-CA NPs induced apoptosis in KB cells was determined by observing an increase in the expression of the BCL-2, BAX, and P53 genes.

CONCLUSION

Our findings unveil the promising potential of ZnO-CR NPs as a candidate with significant utility in dental applications. The demonstrated biocompatibility, potent antioxidant and antiapoptotic activity, along with impressive antimicrobial efficacy position these NPs as a valuable resource in the ongoing fight against dental pathogens and oral cancer.

Mitigating Global Challenges: Harnessing Green Synthesized Nanomaterials for Sustainable Crop Production Systems

Green nanotechnology, an emerging field, offers economic and social benefits while minimizing environmental impact. Nanoparticles, pivotal in medicine, pharmaceuticals, and agriculture, are now sourced from green plants and microorganisms, overcoming limitations of chemically synthesized ones. In agriculture, these green-made nanoparticles find use in fertilizers, insecticides, pesticides, and fungicides. Nanofertilizers curtail mineral losses, bolster yields, and foster agricultural progress. Their biological production, preferred for environmental friendliness and high purity, is cost-effective and efficient. Biosensors aid early disease detection, ensuring food security and sustainable farming by reducing excessive pesticide use. This eco-friendly approach harnesses natural phytochemicals to boost crop productivity. This review highlights recent strides in green nanotechnology, showcasing how green-synthesized nanomaterials elevate crop quality, combat plant pathogens, and manage diseases and stress. These advancements pave the way for sustainable crop production systems in the future.

Anti-cancer Activity of Biogenic Nat-ZnO Nanoparticles Synthesized Using Nyctanthes arbor-tristis (Nat) Flower Extract

Inorganic nanoparticles (NPs) have played an important role as nano-drug delivery systems during cancer therapy in recent years. These NPs can carry cancer therapeutic agents. Due to this, they are considered a promising ancillary to traditional cancer therapies. Among inorganic NPs, Zinc Oxide (ZnO) NPs have been extensively utilized in cellular imaging, gene/drug delivery, anti-microbial, and anti-cancerous applications. In this study, a rapid and cost-effective method was used to synthesize Nat-ZnO NPs using the floral extract of the Nyctanthes arbor-tristis (Nat) plant. Nat-ZnO NPs were physicochemically characterized and tested further on in vitro cancer models. The average hydrodynamic diameter (Zaverage) and the net surface charge of Nat-ZnO NPs were 372.5 ± 70.38 d.nm and -7.03 ± 0.55 mV, respectively. Nat-ZnO NPs exhibited a crystalline nature. HR-TEM analysis showed the triangular shape of NPs. Furthermore, Nat-ZnO NPs were also found to be biocompatible and hemocompatible when tested on mouse fibroblast cells and RBCs. Later, the anti-cancer activity of Nat-ZnO NPs was tested on lung and cervical cancer cells. These NPs displayed potent anti-cancer activity and induced programmed cell death in cancer cells.

Unraveling the plethora of toxicological implications of nanoparticles on living organisms and recent insights into different remediation strategies: A comprehensive review

Increased use of nanoscale particles have benefited many industries, including medicine, electronics, and environmental cleaning. These particles provide higher material performance, greater reactivity, and improved drug delivery. However, the main concern is the generation of nanowastes that can spread in different environmental matrices, posing threat to our environment and human health. Nanoparticles (NPs) have the potential to enter the food chain through a variety of pathways, including agriculture, food processing, packaging, and environmental contamination. These particles can negatively impact plant and animal physiology and growth. Due to the assessment of their environmental damage, nanoparticles are the particles of size between 1 and 100 nm that is the recent topic to be discussed. Nanoparticles' absorption, distribution, and toxicity to plants and animals can all be significantly influenced by their size, shape, and surface chemistry. Due to their absorptive capacity and potential to combine with other harmful substances, they can alter the metabolic pathways of living organisms. Nevertheless, despite the continuous research and availability of data, there are still knowledge gaps related to the ecotoxicology, prevalence and workable ways to address the impact of nanoparticles. This review focuses on the impact of nanoparticles on different organisms and the application of advanced techniques to remediate ecosystems using hyperaccumulator plant species. Future considerations are explored around nano-phytoremediation, as an eco-friendly, convenient and cost effective technology that can be applied at field scales.

Improved Persistence of Bacteriophage Formulation with Nano N-Acetylcysteine-Zinc Sulfide and Tomato Bacterial Spot Disease Control

Bacteriophages are biocontrol agents used to manage bacterial diseases. They have long been used against plant pathogenic bacteria; however, several factors impede their use as a reliable disease management strategy. Short-lived persistence on plant surfaces under field conditions results mainly from rapid degradation by exposure to ultraviolet (UV) light. Currently, there are no effective commercial formulations that protect phages from UV. The phage ΦXp06-02-1, which lyses strains of the tomato bacterial spot pathogen Xanthomonas perforans, was mixed with different concentrations of the nanomaterial N-acetylcysteine surface-coated manganese-doped zinc sulfide (NAC-ZnS; 3.5 nm). In vitro, NAC-ZnS at 10,000 μg/ml formulated phage, when exposed to UV for 1 min, provided statistically equivalent plaque-forming unit (PFU) recovery as phages that were not exposed to UV. NAC-ZnS had no negative effect on the phage's ability to lyse bacterial cells under in vitro conditions. NAC-ZnS reduced phage degradation over time in comparison with the nontreated control, whereas N-acetylcysteine-zinc oxide (NAC-ZnO) had no effect. In fluorescent light, without UV exposure, NAC-ZnO-formulated phages were more infective than NAC-ZnS-formulated phages. The nanomaterial-phage mixture did not cause any phytotoxicity when applied to tomato plants. Following exposure to sunlight, the NAC-ZnS formulation improved phage persistence in the phyllosphere by 15 times compared with nonformulated phages. NAC-ZnO-formulated phage populations were undetectable within 32 h, whereas NAC-ZnS-formulated phage populations were detected at 103 PFU/g. At 4 h of sunlight exposure, NAC-ZnS-formulated phages at 1,000 μg/ml significantly reduced tomato bacterial spot disease severity by 16.4% compared with nonformulated phages. These results suggest that NAC-ZnS can be used to improve the efficacy of phages for bacterial diseases.

Green synthesis of zinc oxide nanoparticles using novel bacterium strain (Bacillus subtilis NH1-8) and their in vitro antibacterial and antibiofilm activities against Salmonellatyphimurium

Zinc oxide nanoparticles (ZnO NPs) are used in a range of applications, including food packaging, preservation, and storage. In the current investigation, extracellular green synthesis of ZnO NPs through an simple, eco-friendly, and rapid approach using a novel bacterial strain (Bacillus subtilis NH1-8) was studied. To assess the morphological, optical, and structural properties of ZnO NPs, transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), scanning electron microscopy (SEM), fourier transform infrared (FTIR) spectroscopy, ultraviolet-visible (UV-vis) spectroscopy, and X-ray diffraction (XRD) techniques were carried out. In addition, disk diffusion, minimum bactericidal concentration (MBC), and minimum inhibitory concentration (MIC) methods were performed to determine the antibacterial activity of ZnO NPs. The average size of biosynthesized ZnO NPs was 39 nm, exhibiting semi-spherical, which was confirmed by TEM analyses. The UV-vis spectroscopy exhibited the absorption peak at 200-800nm. The ZnO NPs have shown effective antimicrobial and antibiofilm activities against S. typhimurium. Thus, biosynthesized ZnO NPs could be exploited as a breakthrough technology in the surface coating of food containers and cans to minimize contamination by S. typhimurium.

Dynamic interplay between nano-enabled agrochemicals and the plant-associated microbiome

The plant-associated microbiome is known to be a critical component for crop growth, nutrient acquisition, resistance to pathogens, and abiotic stress tolerance. Conventional approaches have been attempted to manipulate the plant-soil microbiome to improve plant performance; however, several issues have arisen, such as collateral negative impacts on microbiota composition. The lack of reliability and robustness of conventional techniques warrants efforts to develop novel alternative strategies. Nano-enabled approaches have emerged as promising platforms for enhancing agricultural sustainability and global food security. Specifically, the use of engineered nanomaterials (ENMs) as nanoscale agrochemicals has great potential to modulate the plant-associated microbiome. We review the dynamic interplay between nano-agrochemicals and the plant-associated microbiome for the safe development and use of nano-enabled microbiome engineering.

Development and Evaluation of Zinc and Iron Nanoparticles Functionalized with Plant Growth-Promoting Rhizobacteria (PGPR) and Microalgae for Their Application as Bio-Nanofertilizers

Micronutrient deficiencies are widespread and growing global concerns. Nanoscale nutrients present higher absorption rates and improved nutrient availability and nutrient use efficiency. Co-application of nanofertilizers (NFs) with biological agents or organic compounds increases NF biocompatibility, stability, and efficacy. This study aimed to develop and evaluate zinc and iron bio-nanofertilizers formulated with plant growth-promoting rhizobacteria (PGPR) and microalgae. Nanoparticles (NPs) were synthesized with the co-precipitation method and functionalized with Pseudomonas species and Spirulina platensis preparation. NPs were characterized and evaluated on seed germination, soil microbial growth, and early plant response under seedbed conditions. NPs corresponded to zinc oxide (ZnO; 77 nm) and maghemite (γ-Fe2O3; 68 nm). Functionalized nanoparticles showed larger sizes, around 145-233 nm. The seedling vigor index of tomato and maize was significantly increased (32.9-46.1%) by bacteria-functionalized ZnO- and γ-Fe2O3-NPs at 75 ppm. NFs at 250 and 75 ppm significantly increased bacterial growth. NFs also improved early plant growth by increasing plant height (14-44%), leaf diameter (22-47%), and fresh weight (46-119%) in broccoli and radish, which were mainly influenced by bacteria capped ZnO- and γ-Fe2O3-NPs at 250 ppm. Beneficial effects on plant growth can be attributed to the synergistic interaction of the biological components and the zinc and iron NPs in the bio-nanofertilizers.

Bio-functionalized nickel-silica nanoparticles suppress bacterial leaf blight disease in rice (Oryza sativa L.)

Introduction

Bacterial leaf blight (BLB) caused by Xanthomonas oryzae pv. oryzae (Xoo) is one of the most devastative diseases that threatens rice plants worldwide. Biosynthesized nanoparticle (NP) composite compounds have attracted attention as environmentally safe materials that possess antibacterial activity that could be used in managing plant diseases.

Methods

During this study, a nanocomposite of two important elements, nickel and silicon, was biosynthesized using extraction of saffron stigmas (Crocus sativus L.). Characterization of obtained nickel-silicon dioxide (Ni-SiO2) nanocomposite was investigated using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Transmission/Scanning electron microscopy (TEM/SEM), and energy-dispersive spectrum (EDS). Antibacterial activities of the biosynthesized Ni-SiO2 nanocomposite against Xoo were tested by measuring bacterial growth, biofilm formation, and dead Xoo cells.

Results and discussions

The bacterial growth (OD600) and biofilm formation (OD570) of Xoo treated with distilled water (control) was found to be 1.21 and 1.11, respectively. Treatment with Ni-SiO2 NPs composite, respectively, reduced the growth and biofilm formation by 89.07% and 80.40% at 200 μg/ml. The impact of obtained Ni-SiO2 nanocomposite at a concentration of 200 μg/ml was assayed on infected rice plants. Treatment of rice seedlings with Ni-SiO2 NPs composite only had a plant height of 64.8 cm while seedlings treated with distilled water reached a height of 45.20 cm. Notably, Xoo-infected seedlings treated with Ni-SiO2 NPs composite had a plant height of 57.10 cm. Furthermore, Ni-SiO2 NPs composite sprayed on inoculated seedlings had a decrease in disease leaf area from 43.83% in non-treated infected seedlings to 13.06% in treated seedlings. The FTIR spectra of biosynthesized Ni-SiO2 nanocomposite using saffron stigma extract showed different bands at 3,406, 1,643, 1,103, 600, and 470 cm-1. No impurities were found in the synthesized composite. Spherically shaped NPs were observed by using TEM and SEM. EDS revealed that Ni-SiO2 nanoparticles (NPs) have 13.26% Ni, 29.62% Si, and 57.11% O. Xoo treated with 200 µg/ml of Ni-SiO2 NPs composite drastically increased the apoptosis of bacterial cells to 99.61% in comparison with 2.23% recorded for the control.

Conclusions

The application of Ni-SiO2 NPs significantly improved the vitality of rice plants and reduced the severity of BLB.

Bacteriophage-mediated biosynthesis of MnO2NPs and MgONPs and their role in the protection of plants from bacterial pathogens

Introduction

Xanthomonas oryzae pv. oryzae (Xoo) is the plant pathogen of Bacterial Leaf Blight (BLB), which causes yield loss in rice.

Methods

In this study, the lysate of Xoo bacteriophage X3 was used to mediate the bio-synthesis of MgO and MnO₂. The physiochemical features of MgONPs and MnO₂NPs were observed via Ultraviolet - Visible spectroscopy (UV-Vis), X-ray diffraction (XRD), Transmission/Scanning electron microscopy (TEM/SEM), Energy dispersive spectrum (EDS), and Fourier-transform infrared spectrum (FTIR). The impact of nanoparticles on plant growth and bacterial leaf blight disease were evaluated. Chlorophyll fluorescence was used to determine whether the nanoparticles application were toxic to the plants.

Results

An absorption peak of 215 and 230 nm for MgO and MnO₂, respectively, confirmed nanoparticle formation via UV-Vis. The crystalline nature of the nanoparticles was detected by the analysis of XRD. Bacteriological tests indicated that MgONPs and MnO₂NPs sized 12.5 and 9.8 nm, respectively, had strong in vitro antibacterial effects on rice bacterial blight pathogen, Xoo. MnO₂NPs were found to have the most significant antagonist effect on nutrient agar plates, while MgONPs had the most significant impact on bacterial growth in nutrient broth and on cellular efflux. Furthermore, no toxicity to plants was observed for MgONPs and MnO₂NPs, indeed, MgONPs at 200 μg/mL significantly increased the quantum efficiency of PSII photochemistry on the model plant, Arabidopsis, in light (ΦPSII) compared to other interactions. Additionally, significant suppression of BLB was noted in rice seedlings amended with the synthesized MgONPs and MnO₂NPs. MnO₂NPs showed promotion of plant growth in the presence of Xoo compared to MgONPs.

Conclusion

An effective alternative for the biological production of MgONPs and MnO₂NPs was reported, which serves as an effective substitute to control plant bacterial disease with no phytotoxic effect.

Transcriptomic and proteomic profiling reveals toxicity and molecular action mechanisms of bioengineered chitosan‑iron nanocomposites against Xanthomonas oryzae pv. oryzae

Bacterial leaf blight (BLB) pathogen, Xanthomonas oryzae pv. oryzae (Xoo) is the most devastating bacterial pathogen, which jeopardizes the sustainable rice (Oryza sativa L.) production system. The use of antibiotics and conventional pesticides has become ineffective due to increased pathogen resistance and associated ecotoxicological concerns. Thus, the development of effective and sustainable antimicrobial agents for plant disease management is inevitable. Here, we investigated the toxicity and molecular action mechanisms of bioengineered chitosan‑iron nanocomposites (BNCs) against Xoo using transcriptomic and proteomic approaches. The transcriptomic and proteomics analyses revealed molecular antibacterial mechanisms of BNCs against Xoo. Transcriptomic data revealed that various processes related to cell membrane biosynthesis, antioxidant stress, DNA damage, flagellar biosynthesis and transcriptional regulator were impaired upon BNCs exposure, which clearly showing the interaction of BNCs to Xoo pathogen. Similarly, proteomic profiling showed that BNCs treatment significantly altered the levels of functional proteins involved in the integral component of the cell membrane, catalase activity, oxidation-reduction process and metabolic process in Xoo, which is consistent with the results of the transcriptomic analysis. Overall, this study suggested that BNCs has great potential to serve as an eco-friendly, sustainable, and non-toxic alternative to traditional agrichemicals to control the BLB disease in rice.

Recent progress on plant extract-mediated biosynthesis of ZnO-based nanocatalysts for environmental remediation: Challenges and future outlooks

The plant extract mediated green synthesis of nanomaterials has attracts enormous interest due to its cost-effectiveness, greener, and environmentally friendly. It is also considered as an alternative and facile method in which the phytochemicals can be used as a natural capping and reducing agents and helped to produce nanomaterials with high surface area, different sizes, and shapes. One of the materials fabricated using green methods is zinc oxide (ZnO) semiconductor due to its enormous applications in different field areas. In this review, an overview of recent progress on green synthesized ZnO-based catalysts and various modification methods for the purpose of enhancing the catalytic activity of ZnO and the corresponding structural-activity and interactions towards the removal of pollutants are highlighted. Particularly, the plant extract mediated ZnO-based photocatalysts application for the removal of pollutants via photocatalytic degradation, reduction reaction, and adsorption mechanism are demonstrated. Besides, the opportunities, challenges, and future outlooks of ZnO-based materials for environmental remediation with green and sustainable methods are also included. We believe that this review is a timely and comprehensive review on the recent progress related to plant extract mediated ZnO-based nanocatalysts synthesis and applications for environmental remediation.

Nanobiotechnology in crop stress management: an overview of novel applications

Agricultural crops are subject to a variety of biotic and abiotic stresses that adversely affect growth and reduce the yield of crop plantss. Traditional crop stress management approaches are not capable of fulfilling the food demand of the human population which is projected to reach 10 billion by 2050. Nanobiotechnology is the application of nanotechnology in biological fields and has emerged as a sustainable approach to enhancing agricultural productivity by alleviating various plant stresses. This article reviews innovations in nanobiotechnology and its role in promoting plant growth and enhancing plant resistance/tolerance against biotic and abiotic stresses and the underlying mechanisms. Nanoparticles, synthesized through various approaches (physical, chemical and biological), induce plant resistance against these stresses by strengthening the physical barriers, improving plant photosynthesis and activating plant defense mechanisms. The nanoparticles can also upregulate the expression of stress-related genes by increasing anti-stress compounds and activating the expression of defense-related genes. The unique physico-chemical characteristics of nanoparticles enhance biochemical activity and effectiveness to cause diverse impacts on plants. Molecular mechanisms of nanobiotechnology-induced tolerance to abiotic and biotic stresses have also been highlighted. Further research is needed on efficient synthesis methods, optimization of nanoparticle dosages, application techniques and integration with other technologies, and a better understanding of their fate in agricultural systems.

In vitro genotoxicity assessment of biosynthesized zinc oxide nanoparticles

There are various studies on the toxicological potentials of conventionally synthesized zinc oxide (ZnO) nanoparticles, which are useful tools for many medical applications. However, knowledge about the biologically synthesized ones is still limited. In this study, the potential of producing ZnO nanoparticles via a green synthesis method, which enables safer, environmentally, economical and controlled production by using the Symphoricarpos albus L. plant, was investigated. For this purpose, aqueous extract was obtained from the fruits of the plant and reacted with zinc nitrate precursor. Characterization of the synthesized product was carried out by SEM and EDAX analyzes. In addition, the biosafety of the product was also investigated by using the Ames/Salmonella, E. coli WP2, Yeast DEL, seed germination, and RAPD test systems. The results obtained from SEM studies showed that spherical nanoparticles with an average diameter of 30 nm were synthesized as a result of the reaction. EDAX findings confirmed that these nanoparticles were composed of Zn and O elements. On the other hand, according to the findings of the biocompatibility tests, the synthesized nanoparticle did not show any toxic and genotoxic effects up to a concentration of 640 μg/ml in any of the test systems. Accordingly, considering the findings of our study, it was concluded that the aqueous extract of S. albus fruits can be used for the green synthesis of ZnO nanoparticles, the products obtained successfully passed the biocompatibility tests in our study, and additionally, more comprehensive biocompatibility tests should be performed before industrial scale production.

Cobalt oxide nanoparticles: An effective growth promoter of Arabidopsis plants and nano-pesticide against bacterial leaf blight pathogen in rice

Recently, the application of cobalt oxide nanoparticles (Co₃O₄NPs) has gained popularity owing to its magnetic, catalytic, optical, antimicrobial, and biomedical properties. However, studies on its use as a crop protection agent and its effect on photosynthetic apparatus are yet to be reported. Here, Co₃O₄NPs were first green synthesized using Hibiscus rosa-sinensis flower extract and were characterized using UV-Vis spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction (XRD), transmission/scanning electron microscopy methods. Formation of the Co₃O₄NPs was attested based on surface plasmon resonance at 210 nm. XRD assay showed that the samples were crystalline having a mean size of 34.9 nm. The Co₃O₄NPs at 200 µg/ml inhibited the growth (OD₆₀₀ = 1.28) and biofilm formation (OD₅₇₀ = 1.37) of Xanthomonas oryzae pv. oryzae (Xoo) respectively, by 72.87% and 79.65%. Rice plants inoculated with Xoo had disease leaf area percentage (DLA %) of 57.25% which was significantly reduced to 11.09% on infected plants treated with 200 µg/ml Co₃O₄NPs. Also, plants treated with 200 µg/ml Co₃O₄NPs only had significant increment in shoot length, root length, fresh weight, and dry weight in comparison to plants treated with double distilled water. The application of 200 µg/ml Co₃O₄NPs on the Arabidopsis plant significantly increased the photochemical efficacy of PSII (ΦPSII) and photochemical quenching (qP) respectively, by 149.10% and 125.00% compared to the control while the non-photochemical energy dissipation (ΦNPQ) was significantly lowered in comparison to control. In summary, it can be inferred that Co₃O₄NPs can be a useful agent in the management of bacterial phytopathogen diseases.

Antioxidant Activity as an Indicator of the Efficiency of Plant Extract-Mediated Synthesis of Zinc Oxide Nanoparticles

The green synthesis of zinc oxide nanoparticles (ZnO NPs) using a diverse range of plant species has been extensively reported. Despite the success achieved by biogenic synthesis, there are problems with the control and prediction of the properties of ZnO NPs, due to phytochemical diversity between plant species. In this sense, the main objective of our work was to investigate the effect of the antioxidant activity (AA) of plant extracts on the physicochemical characteristics of ZnO NPs (production yield, chemical composition, polydispersity index (PDI), surface charge (ζ-potential) and average particle size). In order to accomplish this objective, four plant extract with different antioxidant activities were used: Galega officinalis, Buddleja globosa, Eucalyptus globulus, and Aristotelia chilensis. Phytochemical screening, quantitative analysis of phenolic compounds and antioxidant activity determination of the different extracts were carried out. Chemical species such as catechin, malvidin, quercetin, caffeic acid, and ellagic acid were the dominant components, found in the extracts studied. The A. chilensis extract showed the highest value of total phenolic compounds (TPC) and AA, followed by E. globulus, B. globosa and G. officinalis. Zetasizer, Fourier-transform infrared (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA) data show that plant extracts with lower AA leads to a decrease in the yield of ZnO NPs and an increase in the amount of residual organic extract that remains on the particles. The latter caused an increase in the average particle size, PDI and ζ-potential as a consequence of agglomeration and particle coarsening. Our result suggest that it is possible to use the AA as an indicator of the potential reducing capacity of plant extracts. In this way it is possible to guarantee the reproducibility of the synthesis process as well as ensure the formation of ZnO NPs with desired characteristics.

Biosynthesis of silver nanoparticles using Pseudomonas canadensis, and its antivirulence effects against Pseudomonas tolaasii, mushroom brown blotch agent

This study reports the biosynthesis of silver nanoparticles (AgNPs) using a Pseudomonas canadensis Ma1 strain isolated from wild-growing mushrooms. Freshly prepared cells of P. canadensis Ma1 incubated at 26-28 °C with a silver nitrate solution changed to a yellowish brown color, indicating the formation of AgNPs, which was confirmed by UV-Vis spectroscopy, scanning electron microscopy (SEM), and X-ray diffraction. SEM analysis showed spherical nanoparticles with a distributed size mainly between 21 and 52 nm, and the XRD pattern revealed the crystalline nature of AgNPs. Also, it provides an evaluation of the antimicrobial activity of the biosynthesized AgNPs against Pseudomonas tolaasii Pt18, the causal agent of mushroom brown blotch disease. AgNPs were found to be bioactive at 7.8 μg/ml showing a minimum inhibitory concentration (MIC) effect against P. tolaasii Pt18 strain. AgNPs at the MIC level significantly reduced virulence traits of P. tolaasii Pt18 such as detoxification of tolaasin, various motility behavior, chemotaxis, and biofilm formation which is important for pathogenicity. Scanning electron microscopy (SEM) revealed that bacterial cells treated with AgNPs showed a significant structural abnormality. Results showed that AgNPs reduced brown blotch symptoms in vivo. This research demonstrates the first helpful use of biosynthesized AgNPs as a bactericidal agent against P. tolaasii.

Scaling-up strategies for controllable biosynthetic ZnO NPs using cell free-extract of endophytic Streptomyces albus: characterization, statistical optimization, and biomedical activities evaluation

In this study, we identified a suitable precursor and good cellular compartmentalization for enhancing bioactive metabolites to produce biosynthetic zinc oxide nanoparticles (ZnO NPs). An effective medium for cultivating endophytic Streptomyces albus strain E56 was selected using several optimized approaches in order to maximize the yield of biosynthetic ZnO NPs. The highest biosynthetic ZnO NPs yield (4.63 g/L) was obtained when pipetting the mixed cell-free fractions with 100 mM of zinc sulfate as a precursor. The generation of biosynthetic ZnO NPs was quickly verified using a colored solution (white color) and UV-Visible spectroscopy (maximum peak, at 320 nm). On a small scale, the Taguchi method was applied to improve the culture medium for culturing the strain E56. As a result, its cell-dry weight was 3.85 times that of the control condition. And then the biosynthesis of ZnO NPs (7.59 g/L) was increased by 1.6 times. Furthermore, by using the Plackett-Burman design to improve the utilized biogenesis pathway, the biosynthesis of ZnO NPs (18.76 g/L) was increased by 4.3 times. To find the best growth production line, we used batch and fed batch fermentation modes to gradually scale up biomass output. All kinetics of studied cell growth were evaluated during fed-batch fermentation as follows: biomass yield was 271.45 g/L, yield coefficient was 94.25 g/g, and ZnO NPs yield was 345.32 g/L. In vitro, the effects of various dosages of the controllable biosynthetic ZnO NPs as antimicrobial and anticancer agents were also investigated. The treatments with controllable biosynthetic ZnO NPs had a significant impact on all the examined multidrug-resistant human pathogens as well as cancer cells.

Novel biosynthesis of MnO NPs using Mycoendophyte: industrial bioprocessing strategies and scaling-up production with its evaluation as anti-phytopathogenic agents

This report provides the first description of the myco-synthesis of rod-shaped MnO NPs with an average crystallite size of ~ 35 nm, employing extracellular bioactive metabolites of endophytic Trichoderma virens strain EG92 as capping/reducing agents and MnCl₂·4H₂O as a parent component. The wheat bran medium was chosen to grow endophytic strain EG92, which produced a variety of bioactive metabolites in extracellular fraction, which increases the yield of MnO NPs to 9.53 g/l. The whole medium and fungal growth conditions that influenced biomass generation were optimized as successive statistical optimization approaches (Plackett-Burman and Box-Behnken designs). The production improvements were achieved at pH 5.5, WBE (35%), and inoculum size (10%), which increased X_max to twelve-folds (89.63 g/l); thereby, P_max increased to eight-folds (82.93 g/l). After 162 h, X_max (145.63 g/l) and P_max (99.52 g/l) on the side of µ_max and Y_X/S were determined as 0.084 and 7.65, respectively. Via Taguchi experimental design, fungus-fabricated MnO NPs reaction was improved by adding 0.25 M of MnCl₂·4H₂O to 100% of fungal extract (reducing/capping agents) and adjusting the reaction pH adjusted to ~ 5. This reaction was incubated at 60 °C for 5 h before adding 20% fungal extract (stabilizing agent). Also, P_max was raised 40-fold (395.36 g/l) over the BC. Our myco-synthesized MnO NPs exhibit faster and more precise antagonistic actions against phytopathogenic bacteria than fungi; they could be employed as an alternative and promised nano-bio-pesticide to manage a variety of different types of disease-pathogens in the future.

Antibacterial and Anti-Inflammatory Properties of ZnO Nanoparticles Synthesized by a Green Method Using Sargassum Extracts

The present work shows the synthesis of ZnO nanoparticles through a green method, using sargassum extracts, which provide the reducing and stabilizing compounds. The conditions of the medium in which the reaction was carried out was evaluated, that is, magnetic stirring, ultrasound assisted, and resting condition. UV-Vis, FTIR spectroscopy, and X-ray diffraction results confirmed the synthesis of ZnO with nanometric crystal size. The scanning electron microscopy analysis showed that the morphology and size of the particles depends on the synthesis condition used. It obtained particles between 20 and 200 nm in the sample without agitation, while the samples with stirring and ultrasound were 80 nm and 100 nm, respectively. ZnO nanoparticles showed antibacterial activity against Gram-positive S. aureus and Gram-negative P. aeruginosa. A quantitative analysis was performed by varying the concentration of ZnO nanoparticles. In all cases, the antibacterial activity against Gram-positives was greater than against Gram-negatives. Ultrasound-assisted ZnO nanoparticles showed the highest activity, around 99% and 80% for S. aureus and P. aeruginosa, respectively. Similar results were obtained in the study of the anti-inflammatory activity of ZnO nanoparticles; the ultrasound-assisted sample exhibited the highest percentage (93%), even above that shown by diclofenac, which was used as a reference. Therefore, the ZnO nanoparticles synthesized with sargassum extracts have properties that can be used safely and efficiently in the field of biomedicine.

Phyto-assisted synthesis of zinc oxide nanoparticles for developing antibiofilm surface coatings on central venous catheters

Medical devices such as Central Venous Catheters (CVCs), are routinely used in intensive and critical care settings. In the present scenario, incidences of Catheter-Related Blood Stream Infections (CRBSIs) pose a serious challenge. Despite considerable advancements in the antimicrobial therapy and material design of CVCs, clinicians continue to struggle with infection-related complications. These complications are often due colonization of bacteria on the surface of the medical devices, termed as biofilms, leading to infections. Biofilm formation is recognized as a critical virulence trait rendering infections chronic and difficult to treat even with 1,000x, the minimum inhibitory concentration (MIC) of antibiotics. Therefore, non-antibiotic-based solutions that prevent bacterial adhesion on medical devices are warranted. In our study, we report a novel and simple method to synthesize zinc oxide (ZnO) nanoparticles using ethanolic plant extracts of Eupatorium odoratum. We investigated its physio-chemical characteristics using Field Emission- Scanning Electron Microscopy and Energy dispersive X-Ray analysis, X-Ray Diffraction (XRD), Photoluminescence Spectroscopy, UV-Visible and Diffuse Reflectance spectroscopy, and Dynamic Light Scattering characterization methods. Hexagonal phase with wurtzite structure was confirmed using XRD with particle size of ∼50 nm. ZnO nanoparticles showed a band gap 3.25 eV. Photoluminescence spectra showed prominent peak corresponding to defects formed in the synthesized ZnO nanoparticles. Clinically relevant bacterial strains, viz., Proteus aeruginosa PAO1, Escherichia coli MTCC 119 and Staphylococcus aureus MTCC 7443 were treated with different concentrations of ZnO NPs. A concentration dependent increase in killing efficacy was observed with 99.99% killing at 500 μg/mL. Further, we coated the commercial CVCs using green synthesized ZnO NPs and evaluated it is in vitro antibiofilm efficacy using previously optimized in situ continuous flow model. The hydrophilic functionalized interface of CVC prevents biofilm formation by P. aeruginosa, E. coli and S. aureus. Based on our findings, we propose ZnO nanoparticles as a promising non-antibiotic-based preventive solutions to reduce the risk of central venous catheter-associated infections.

Eco-friendly Synthesis and Characterization of Silver Nanoparticles using Juglans regia Extract and their Anti-Trichomonas vaginalis, Anticancer, and Antimicrobial Effects

BACKGROUND

Green synthesis is an efficient and eco-friendly method that has been used frequently in silver nanoparticle production in recent years. This method facilitates the production of nanoparticles using various organisms, such as plants, and is also cheaper and easier to apply than the other techniques.

AIMS

This study aims to find possible mechanisms and pharmacological effects of cubic silver nanoparticles (AgNPs).

OBJECTIVES

This study characterizes cubic AgNPs and describes in detail their anticancer, antimicrobial, and anti- Trichomonas vaginalis abilities.

METHODS

Silver nanoparticles were produced by green synthesis using Juglans regia (walnut) leaf aqueous extract. We validated the formation of AgNPs by UV-vis spectroscopy, FTIR analysis, and SEM micrographs. To determine the pharmacological effects of the AgNPs, we conducted anti-cancer, anti-bacterial, and anti-parasitic activity experiments.

RESULTS

Cytotoxicity data revealed that AgNPs have cellular inhibitory properties on cancerous MCF7 (breast), HeLa (cervix), C6 (glioma), and HT29 (colorectal) cell lines. Similar results are also obtained with anti-bacterial and anti- Trichomonas vaginalis activity experiments. At certain concentrations, AgNPs displayed stronger anti-bacterial activities than the sulbactam/cefoperazone antibiotic combination in five bacteria species. Furthermore, the 12-h AgNPs treatment exhibited satisfactory anti-Trichomonas vaginalis activity similar to the FDA-approved metronidazole.

CONCLUSION

Consequently, AgNPs produced by the green synthesis method by Juglans regia leaves showed remarkable anti-carcinogenic, anti-bacterial, and anti-trichomonas vaginalis activities. We propose the potential usefulness of green synthesized AgNPs as therapeutics.

Application and mechanisms of metal-based nanoparticles in the control of bacterial and fungal crop diseases

Nanotechnology is a young branch of the discipline generated by nanomaterials. Its development has greatly contributed to technological progress and product innovation in the field of agriculture. The antimicrobial properties of nanoparticles (NPs) can be used to develop nanopesticides for plant protection. Plant diseases caused by bacterial and fungal infestations are the main types of crop diseases. Once infected, they will seriously threaten crop growth, reduce yield and quality, and affect food safety, posing a health risk to humans. We reviewed the application of metal-based nanoparticles in inhibiting plant pathogenic bacteria and fungi, and discuss the antibacterial mechanisms of metal-based nanoparticles from two aspects: the direct interaction between nanoparticles and pathogens, and the indirect effects of inducing plant resilience to disease. © 2022 Society of Chemical Industry.

Metallic and non-metallic nanoparticles from plant, animal, and fisheries wastes: potential and valorization for application in agriculture

Global agriculture is facing tremendous challenges due to climate change. The most predominant amongst these challenges are abiotic and biotic stresses caused by increased incidences of temperature extremes, drought, unseasonal flooding, and pathogens. These threats, mostly due to anthropogenic activities, resulted in severe challenges to crop and livestock production leading to substantial economic losses. It is essential to develop environmentally viable and cost-effective green processes to alleviate these stresses in the crops, livestock, and fisheries. The application of nanomaterials in farming practice to minimize nutrient losses, pest management, and enhance stress resistance capacity is of supreme importance. This paper explores innovative methods for synthesizing metallic and non-metallic nanoparticles using plants, animals, and fisheries wastes and their valorization to mitigate abiotic and biotic stresses and input use efficiency in climate-smart and stress-resilient agriculture including crop plants, livestock, and fisheries.

Screening of four accelerated synthesized techniques in green fabrication of ZnO nanoparticles using Willow leaf extract

Using hydro-alcoholic extract of Willow leaf, zinc oxide nanoparticles (ZnO NPs) were synthesized via four accelerated different heating methods namely, Bain-Marie heating (40 °C for 2 h), Conventional heating with stirrer (80 °C for 2 h), hydrothermal autoclave (1.5 atm and 121 °C for 15 min) and microwave irradiation (800 W and 160 °C for 3 min). Calcination process was finally completed on the obtained colloidal solutions in a furnace (350 °C for 2 h). The characteristics of the resulted ZnO NPs including particle size, grain size, crystallinity, specific surface area, morphology, photocatalytic, antioxidant bactericidal activities were estimated using X-ray diffractometry, scanning electron microscopy and Ultraviolet-visible spectroscopy techniques. Attained results indicated that among four different utilized synthetic methods, the fabricated ZnO NPs via Bain-Marie heating, had desired physico-chemical characteristics and bactericidal effect including small particle size (70 nm), high specific area (284 m2/gr), antioxidant activity (28.5%), photocatalytic activity (degradation of 50% of Methylene Blue), and bactericidal effects against Escherichia coli (clear zone diameter of 1.4 ± 0.1 cm) and Staphylococcus aureus (1.3 ± 0.1 cm).

Recent progress in bio-mediated synthesis and applications of engineered nanomaterials for sustainable agriculture

The ever-increasing demand for agricultural food products, medicine, and other commercial sectors requires new technologies for agricultural practices and promoting the optimum utilization of natural resources. The application of engineered nanomaterials (ENMs) enhance the biomass production and yield of food crop while resisting harmful environmental stresses. Bio-mediated synthesis of ENMs are time-efficient, low-cost, environmentally friendly, green technology. The precedence of using a bio-mediated route over conventional precursors for ENM synthesis is non-toxic and readily available. It possesses many active agents that can facilitate the reduction and stabilization processes during nanoparticle formation. This review presents recent developments in bio-mediated ENMs and green synthesis techniques using plants, algae, fungi, and bacteria, including significant contributions to identifying major ENM applications in agriculture with potential impacts on sustainability, such as the role of different ENMs in agriculture and their impact on different plant species. The review also covers the advantages and disadvantages of different ENMs and potential future research in this field.

Antimicrobial activity of the biologically synthesized zinc oxide nanoparticles against important rice pathogens

Global rice production is seriously affected by many abiotic and biotic factors. Among the aggressive rice pathogens, Xanthomonas oryzae pv. oryzae (X. o. pv. oryzae), Bipolaris oryzae (B. oryzae) and Sphaerulina oryzina (S. oryzina) cause bacterial leaf blight, brown leaf spot and narrow brown leaf spot diseases, respectively. The objective of this study was to evaluate the efficacy of biogenic zinc oxide nanoparticles (ZnO NPs) as antimicrobial agent to control rice pathogens. This is the first report of antifungal activity evaluation of ZnO NPs against B. oryzae and S. oryzina. A pre-characterized bacterial strain Escherichia sp. SINT7 was bio-prospected for synthesis of green ZnO NPs. The NPs were confirmed by a characteristic peak measured at 360.96 nm through UV-Vis spectroscopy. Further, the NPs were characterized to elucidate the surface capping molecules, crystallite structure and morphology by various spectroscopic and imaging techniques, which confirmed the spherical shape of NPs with size ranging from 13.07 to 22.25 nm. In vitro studies against X. o. pv. oryzae pathogen depicted the substantial antibacterial activity (up to 25.7 mm inhibition zone at 20 μg/ml NPs concentration). Similarly, ZnO NPs reduced the mycelial growth of B. oryzae and S. oryzina up to 72.68 and 95.78%, respectively at 50 μg/ml concentration on potato dextrose agar plates, while the mycelial biomass reduction was found to be 64.66 and 68. 49% for B. oryzae and S. oryzina, respectively on potato dextrose broth media as compared to control without the addition of NPs. The green ZnO NPs also significantly reduced the fungal spore germination and a disintegration of fungal hyphae for both fungal strains was observed under the microscope as a result of NPs treatment. Hence, it was concluded that biologically synthesized ZnO NPs are potential antimicrobials and could be compared in greenhouse pathogenicity assays with commercial pesticides to control rice pathogens.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12298-022-01251-y.

Engineered Zn-based nano-pesticides as an opportunity for treatment of phytopathogens in agriculture

People's desire for food has never slowed, despite the deterioration of the global agricultural environment and the threat to food security. People rely on agrochemicals to ensure normal crop growth and to relieve the existing demand pressure. Phytopathogens have acquired resistance to traditional pesticides as a result of pesticdes' abuse. Compared with traditional formulations, nano-pesticides have superior antimicrobial performance and are environmentally friendly. Zn-based nanoparticles (NPs) have shown their potential as strong antipathogen activity. However, their full potential has not been demonstrated yet. Here, we analyzed the prerequisites for the use of Zn-based NPs as nano-pesticides in agriculture including both intrinsic properties of the materials and environmental conditions. We also summarized the mechanisms of Zn-based NPs against phytopathogens including direct and indirect strategies to alleviate plant disease stress. Finally, the current challenges and future directions are highlighted to advance our understanding of this field and guide future studies.

Biogenic Synthesis of ZnO Nanoparticles and Their Application as Bioactive Agents: A Critical Overview

Zinc oxide is a safe material for humans, with high biocompatibility and negligible cytotoxicity. Interestingly, it shows exceptional antimicrobial activity against bacteria, viruses, fungi, etc., especially when reduced to the nanometer size. As it is easily understandable, thanks to its properties, it is at the forefront of safe antimicrobials in this pandemic era. Besides, in the view of the 2022 European Green Deal announced by the European Commission, even science and nanotechnology are moving towards “greener” approaches to the synthesis of nanoparticles. Among them, biogenic ZnO nanoparticles have been extensively studied for their biological applications and environmental remediation. Plants, algae, fungi, yeast, etc., (which are composed of naturally occurring biomolecules) play, in biogenic processes, an active role in the formation of nanoparticles with distinct shapes and sizes. The present review targets the biogenic synthesis of ZnO nanoparticles, with a specific focus on their bioactive properties and antimicrobial application.

Plants and rhizospheric environment: Affected by zinc oxide nanoparticles (ZnO NPs). A review

Nowadays, there are many critical concerns in the agricultural sector, including reduced productivity of plants due to various environmental factors. Hence, a continuous innovation of existing technologies is necessary. Among the available technologies for sustainable agriculture, nanotechnology is one of the more promising technologies and has a great scope for development in agriculture. Zinc oxide nanoparticles (ZnO NPs) have attracted much attention due to their good properties and can be put into agriculture as nano-fertilizers, nano-growth regulators and nano-pesticides, although much remains to be explored about their mechanisms. Here, we review the literature on the interaction of ZnO NPs with plants through (i) uptake and transport pathways of ZnO NPs in plants. (ii) The mechanisms involved in improving growth, development and resistance. (iii) their effects on the rhizospheric environment. (iv) The toxic effects and mechanisms in plants. Our major conclusions are as follows: (1) they can be absorbed by the plant through the roots and leaves, with subsequent transformation. (2) moderate application can promote plant growth and mitigate stress, while excessive application can produce toxic effects. (3) the effects of them on the rhizospheric environment cannot be ignored. This study may provide a reference for the safe and effective use of ZnO NPs in agricultural production.

Green Approaches, Potentials, and Applications of Zinc Oxide Nanoparticles in Surface Coatings and Films

Interest in the use of zinc oxide nanoparticles (ZnO NPs) in surface coatings and films has increased as its incorporation can significantly improve the mechanical and antimicrobial properties of coatings and film solutions. In an effort to produce green or eco-friendly products, the potential use of ZnO NPs biosynthesized from natural resources to replace conventional petroleum-derived polymers has been investigated. This review provides an insight into the growing trend of incorporating ZnO NPs into synthetic or semi-synthetic or bio-based polymeric materials via different synthesis methods as well as its characteristics and potential applications in surface coatings and films. The antimicrobial potential of ZnO NPs to inhibit the growth of various types of microorganisms as well as its use in surface coatings or films to impart antimicrobial activities that prevent the spread of microorganisms, especially the COVID-19 virus, was also discussed.

Nanotechnological Interventions in Agriculture

Agriculture is an important sector that plays an important role in providing food to both humans and animals. In addition, this sector plays an important role in the world economy. Changes in climatic conditions and biotic and abiotic stresses cause significant damage to agricultural production around the world. Therefore, the development of sustainable agricultural techniques is becoming increasingly important keeping in view the growing population and its demands. Nanotechnology provides important tools to different industrial sectors, and nowadays, the use of nanotechnology is focused on achieving a sustainable agricultural system. Great attention has been given to the development and optimization of nanomaterials and their application in the agriculture sector to improve plant growth and development, plant health and protection and overall performance in terms of morphological and physiological activities. The present communication provides up-to-date information on nanotechnological interventions in the agriculture sector. The present review deals with nanoparticles, their types and the role of nanotechnology in plant growth, development, pathogen detection and crop protection, its role in the delivery of genetic material, plant growth regulators and agrochemicals and its role in genetic engineering. Moreover, the role of nanotechnology in stress management is also discussed. Our aim in this review is to aid researchers to learn quickly how to use plant nanotechnology for improving agricultural production.

Green Synthesis and Characterization of ZnO Nanoparticles Using Pelargonium odoratissimum (L.) Aqueous Leaf Extract and Their Antioxidant, Antibacterial and Anti-inflammatory Activities

Nanoparticles (NPs) exhibit distinct features compared to traditional physico-chemical synthesis and they have many applications in a wide range of fields of life sciences such as surface coating agents, catalysts, food packaging, corrosion protection, environmental remediation, electronics, biomedical and antimicrobial. Green-synthesized metal NPs, mainly from plant sources, have gained a lot of attention due to their intrinsic characteristics like eco-friendliness, rapidity and cost-effectiveness. In this study, zinc oxide (ZnO) NPs have been synthesized employing an aqueous leaf extract of Pelargonium odoratissimum (L.) as a reducing agent; subsequently, the biosynthesized ZnO NPs were characterized by ultraviolet-visible spectroscopy (UV-Vis), dynamic light scattering (DLS), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and energy-dispersive X-ray spectroscopy (EDX), high-resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED). Moreover, aqueous plant leaf extract was subjected to both qualitative and quantitative analysis. Antioxidant activity of ZnO NPs was assessed by DPPH assay, with varying concentrations of ZnO NPs, which revealed scavenging activity with IC₅₀ = 28.11 μg mL⁻¹. Furthermore, the anti-bacterial efficacy of the green synthesized ZnO NPs against four foodborne pathogenic bacterial strains was examined using the disk diffusion assay, and Staphylococcus aureus (ATCC 8095), Pseudomonas aeruginosa (ATCC10662) and Escherichia coli (ATCC 25922) were found to be the most sensitive against biosynthesized ZnO NPs, whereas the least sensitivity was shown by Bacillus cereus (ATCC 13753). The anti-inflammatory effect was also evaluated for both ZnO NPs and the aqueous leaf extract of P. odoratissimum through the human red blood cells (HRBC) membrane stabilization method (MSM) in vitro models which includes hypotonicity-induced hemolysis. A maximum membrane stabilization of ZnO NPs was found to be 95.6% at a dose of 1000 μg mL⁻¹ compared with the standard indomethacin. The results demonstrated that leaf extract of P. odoratissimum is suitable for synthesizing ZnO NPs, with antioxidant, antibacterial as well as superior anti-inflammatory activity by improving the membrane stability of lysosome cells, which have physiological properties similar to erythrocyte membrane cells and have no hemolytic activity. Overall, this study provides biosynthesized ZnO NPs that can be used as a safe alternative to synthetic substances as well as a potential candidate for antioxidants, antibacterial and anti-inflammatory uses in the biomedical and pharmaceutical industries.