Enhanced light-matter interaction in two-dimensional transition metal dichalcogenides

High Q Hybrid Mie-Plasmonic Resonances in van der Waals Nanoantennas on Gold Substrate

Dielectric nanoresonators have been shown to circumvent the heavy optical losses associated with plasmonic devices; however, they suffer from less confined resonances. By constructing a hybrid system of both dielectric and metallic materials, one can retain low losses, while achieving stronger mode confinement. Here, we use a high refractive index multilayer transition-metal dichalcogenide WS2 exfoliated on gold to fabricate and optically characterize a hybrid nanoantenna-on-gold system. We experimentally observe a hybridization of Mie resonances, Fabry-Perot modes, and surface plasmon-polaritons launched from the nanoantennas into the substrate. We measure the experimental quality factors of hybridized Mie-plasmonic (MP) modes to be up to 33 times that of standard Mie resonances in the nanoantennas on silica. We then tune the nanoantenna geometries to observe signatures of a supercavity mode with a further increased Q factor of over 260 in experiment. We show that this quasi-bound state in the continuum results from strong coupling between a Mie resonance and Fabry-Perot-plasmonic mode in the vicinity of the higher-order anapole condition. We further simulate WS2 nanoantennas on gold with a 5 nm thick hBN spacer in between. By placing a dipole within this spacer, we calculate the overall light extraction enhancement of over 107, resulting from the strong, subwavelength confinement of the incident light, a Purcell factor of over 700, and high directivity of the emitted light of up to 50%. We thus show that multilayer TMDs can be used to realize simple-to-fabricate, hybrid dielectric-on-metal nanophotonic devices granting access to high-Q, strongly confined, MP resonances, along with a large enhancement for emitters in the TMD-gold gap.

Chemical passivation of 2D transition metal dichalcogenides: strategies, mechanisms, and prospects for optoelectronic applications

The interest in obtaining high-quality monolayer transition metal dichalcogenides (TMDs) for optoelectronic device applications has been growing dramatically. However, the prevalence of defects and unwanted doping in these materials remain challenges, as they both limit optical properties and device performance. Surface chemical treatments of monolayer TMDs have been effective in improving their photoluminescence yield and charge transport properties. In this scenario, a systematic understanding of the underlying mechanism of chemical treatments will lead to a rational design of passivation strategies in future research, ultimately taking a step toward practical optoelectronic applications. We will therefore describe in this mini-review the strategies, progress, mechanisms, and prospects of chemical treatments to passivate and improve the optoelectronic properties of TMDs.

Active strong coupling of exciton and nanocavity based on GSST-WSe2 hybrid nanostructures

The strong coupling between optical resonance microcavity and matter excitations provides a practical path for controlling light-matter interactions. However, conventional microcavity, whose functions are fixed at the fabrication stage, dramatically limits the modulation of light-matter interactions. Here, we investigate the active strong coupling of resonance mode and exciton in GSST-WSe2 hybrid nanostructures. It is demonstrated that significant spectral splitting is observed in single nanostructures, tetramers, and metasurfaces. We further confirm the strong coupling by calculating the enhanced fluorescence spectra. The coupling effect between the excited resonance and exciton is dramatically modulated during the change of GSST from amorphous to crystalline, thus realizing the strong coupling switching. This switching property has been fully demonstrated in several systems mentioned earlier. Our work is significant in guiding the study of actively tunable strong light-matter interactions at the nanoscale.

Multilayer WS2 for low-power visible and near-infrared phototransistors

Mechanically exfoliated multilayer WS2 flakes are used as the channel of field effect transistors for low-power photodetection in the visible and near-infrared (NIR) spectral range. The electrical characterization as a function of the temperature reveals devices with n-type conduction and slightly different Schottky barriers at the drain and source contacts. The WS2 phototransistors can be operated in self-powered mode, yielding both a current and a voltage when exposed to light. The spectral photoresponse in the visible and the NIR ranges shows a high responsivity (4.5 μA/W) around 1250 nm, making the devices promising for telecommunication applications.

Anomalous layer-dependent photoluminescence spectra of supertwisted spiral WS2

Twisted stacking of two-dimensional materials with broken inversion symmetry, such as spiral MoTe2 nanopyramids and supertwisted spiral WS2, emerge extremely strong second- and third-harmonic generation. Unlike well-studied nonlinear optical effects in these newly synthesized layered materials, photoluminescence (PL) spectra and exciton information involving their optoelectronic applications remain unknown. Here, we report layer- and power-dependent PL spectra of the supertwisted spiral WS2. The anomalous layer-dependent PL evolutions that PL intensity almost linearly increases with the rise of layer thickness have been determined. Furthermore, from the power-dependent spectra, we find the power exponents of the supertwisted spiral WS2 are smaller than 1, while those of the conventional multilayer WS2 are bigger than 1. These two abnormal phenomena indicate the enlarged interlayer spacing and the decoupling interlayer interaction in the supertwisted spiral WS2. These observations provide insight into PL features in the supertwisted spiral materials and may pave the way for further optoelectronic devices based on the twisted stacking materials.

Efficient monodisperse upconversion composite prepared using high-density local field and its dual-mode temperature sensing

Enhanced upconversion via plasmonics has considerable potential in biosensors and solar cells; however, conventional plasmonic configurations such as core-shell assemblies or nanoarray platforms still suffer from the compromise between the enhancement factor and monodispersity, which has failed to meet the requirement of the materials for the in vivo all-solution-prepared solar cells and biosensors. We herein report a monodisperse metal-dielectric-metal (MDM) type upconverted hybrid material with high efficiency. The lanthanide-doped upconversion nanoparticles (UCNPs) were sandwiched by two gold nanodisk mirrors, and the highly localized excitation field around the UCNPs together with the efficient coupling enhanced the upconversion. The upconversion intensity can then be effectively regulated and improved by three to four orders of magnitude. As per the measurement of the temperature-dependent fluorescence intensity and spectra shift, a dual-mode nanothermometer based on our proposed hybrid materials was demonstrated. This MDM-type upconverted hybrid material demonstrated the merits of high efficiency and monodispersity, which demonstrated promise in in vivo biosensors and solar cell fabrication techniques such as spin-coating and roll-to-roll.

Broadening spectral responses and achieving environmental stability in SnS2/Ag-NPs/HfO2 flexible phototransistors

Layered two-dimensional (2D) materials have gained popularity thanks to their atomically thin physique and strong coupling with light. Here, we investigated a wide band gap (≥ 2 eV) 2D material, i.e., tin disulfide (SnS2), and decorated it with silver nanoparticles, Ag-NPs, for broadband photodetection. Our results show that the SnS2/Ag-NPs devices exhibit broadband photodetection ranging from the ultraviolet to near-infrared (250-1050 nm) spectrum with decreased rise/decay times from 8/20 s to 7/16 s under 250 nm wavelength light compared to the bare SnS2 device. This is attributed to the localized surface plasmon resonance effect and the wide band gap of SnS2 crystal. Furthermore, the HfO2-passivated SnS2/Ag-NPs devices exhibited high photodetection performance in terms of photoresponsivity (∼12 500 A W-1), and external quantum efficiency (∼6 × 106%), which are significantly higher compared to those of bare SnS2. Importantly, after HfO2 passivation, the SnS2/Ag-NPs photodetector maintained the stable performance for several weeks with merely ∼5.7% reduction in photoresponsivity. Lastly, we fabricated a flexible SnS2/Ag-NPs photodetector, which shows excellent and stable performance under various bending curvatures (0, 20, and 10 mm), as it retains ∼80% of its photoresponsivity up to 500 bending cycles. Thus, our study provides a simple route to realize broadband and stable photoactivity in flexible 2D material-based devices.

Simultaneously Regulated Highly Polarized and Long-Lived Valley Excitons in WSe2/GaN Heterostructures

Interlayer excitons, with prolonged lifetimes and tunability, hold potential for advanced optoelectronics. Previous research on the interlayer excitons has been dominated by two-dimensional heterostructures. Here, we construct WSe2/GaN composite heterostructures, in which the doping concentration of GaN and the twist angle of bilayer WSe2 are employed as two ingredients for the manipulation of exciton behaviors and polarizations. The exciton energies in monolayer WSe2/GaN can be regulated continuously by the doping levels of the GaN substrate, and a remarkable increase in the valley polarizations is achieved. Especially in a heterostructure with 4°-twisted bilayer WSe2, a maximum polarization of 38.9% with a long lifetime is achieved for the interlayer exciton. Theoretical calculations reveal that the large polarization and long lifetime are attributed to the high exciton binding energy and large spin flipping energy during depolarization in bilayer WSe2/GaN. This work introduces a distinctive member of the interlayer exciton with a high degree of polarization and a long lifetime.

Enabling Waveguide Optics in Rhombohedral-Stacked Transition Metal Dichalcogenides with Laser-Patterned Grating Couplers

Waveguides play a key role in the implementation of on-chip optical elements and, therefore, lie at the heart of integrated photonics. To add the functionalities of layered materials to existing technologies, dedicated fabrication protocols are required. Here, we build on laser writing to pattern grating structures into bulk noncentrosymmetric transition metal dichalcogenides with grooves as sharp as 250 nm. Using thin flakes of 3R-MoS2 that act as waveguides for near-infrared light, we demonstrate the functionality of the grating couplers with two complementary experiments: first, nano-optical imaging is used to visualize transverse electric and magnetic modes, whose directional outcoupling is captured by finite element simulations. Second, waveguide second-harmonic generation is demonstrated by grating-coupling femtosecond pulses into the slabs in which the radiation partially undergoes frequency doubling throughout the propagation. Our work provides a straightforward strategy for laser patterning of van der Waals crystals, demonstrates the feasibility of compact frequency converters, and examines the tuning knobs that enable optimized coupling into layered waveguides.

Interaction-Induced ac Stark Shift of Exciton-Polaron Resonances

Laser-induced shift of atomic states due to the ac Stark effect has played a central role in cold-atom physics and facilitated their emergence as analog quantum simulators. Here, we explore this phenomenon in an atomically thin layer of semiconductor MoSe_{2}, which we embedded in a heterostructure enabling charge tunability. Shining an intense pump laser with a small detuning from the material resonances, we generate a large population of virtual collective excitations and achieve a regime where interactions with this background population are the leading contribution to the ac Stark shift. Using this technique we study how itinerant charges modify-and dramatically enhance-the interactions between optical excitations. In particular, our experiments show that the interaction between attractive polarons could be more than an order of magnitude stronger than those between bare excitons.

Probing optical anapoles with fast electron beams

Optical anapoles are intriguing charge-current distributions characterized by a strong suppression of electromagnetic radiation. They originate from the destructive interference of the radiation produced by electric and toroidal multipoles. Although anapoles in dielectric structures have been probed and mapped with a combination of near- and far-field optical techniques, their excitation using fast electron beams has not been explored so far. Here, we theoretically and experimentally analyze the excitation of optical anapoles in tungsten disulfide (WS2) nanodisks using Electron Energy Loss Spectroscopy (EELS) in Scanning Transmission Electron Microscopy (STEM). We observe prominent dips in the electron energy loss spectra and associate them with the excitation of optical anapoles and anapole-exciton hybrids. We are able to map the anapoles excited in the WS2 nanodisks with subnanometer resolution and find that their excitation can be controlled by placing the electron beam at different positions on the nanodisk. Considering current research on the anapole phenomenon, we envision EELS in STEM to become a useful tool for accessing optical anapoles appearing in a variety of dielectric nanoresonators.

Lasing Effect in Symmetrical van der Waals Heterostructured Metasurfaces Due to Lattice-Induced Multipole Coupling

New practical ways to reach the lasing effect in symmetrical metasurfaces have been developed and theoretically demonstrated. Our approach is based on excitation of the resonance of an octupole quasi-trapped mode (OQTM) in heterostructured symmetrical metasurfaces composed of monolithic disk-shaped van der Waals meta-atoms featured by thin photoluminescent layers and placed on a substrate. We revealed that the coincidence of the photoluminescence spectrum maximum of these layers with the wavelength of high-quality OQTM resonance leads to the lasing effect. Based on the solution of laser rate equations and direct full-wave simulation, it was shown that lasing is normally oriented to the metasurface plane and occurs from the entire area of metasurface consisting of MoS2/hBN/MoTe2 disks with line width of generated emission of only about 1.4 nm near the wavelength 1140 nm. This opens up new practical possibilities for creating surface emitting laser devices in subwavelength material systems.

Pushing Optical Virus Detection to a Single Particle through a High-Q Quasi-bound State in the Continuum in an All-dielectric Metasurface

Bound states in the continuum (BICs) have emerged as a powerful platform for boosting light-matter interactions because they provide an alternative way of realizing optical resonances with ultrahigh quality factors, accompanied by extreme field confinement. In this work, we realized an optical biosensor by harnessing a quasi-BIC (qBIC) supported by an all-dielectric metasurface with broken symmetry, whose unit cell is composed of a silicon cuboid with two asymmetric air holes. Thanks to the excellent field confinement within the air gap of a metasurface enabled by such a high-Q qBIC, the figure of merit (FOM) of the biosensor is up to 2136.35 RIU-1. Futhermore, we demonstrated that such a high-Q metasurface can push the detection limit to a few virus particles. Our results may find exciting applications in extreme biochemical sensing like COVID-19 with ultralow concentrations.

Toroidal Dipole BIC-Driven Highly Robust Perfect Absorption with a Graphene-Loaded Metasurface

Achieving perfect absorption in few-layer two-dimensional (2D) materials plays a crucial role in applications such as optoelectronics and sensing. However, the underlying mechanisms of all reported works imply a strongly inherent dependence of the central wavelength on the structural parameters. Here, we propose a structure-parameter-deviation immune method for achieving perfect absorption at any desired wavelength by harnessing the toroidal dipole-bound state in the continuum (TD BIC). We experimentally demonstrate the versatile design with a monolayer-graphene-loaded compound grating structure. Such a TD BIC built upon the TE31 mode allows for the transition from BIC to quasi-BIC without breaking the structural symmetry, enabling the stable resonance wavelength while tailoring the quality factors via variation of the gap distance. Comparison with traditional literature further reveals the superiority of our method in realizing highly robust perfect absorption, with a wavelength stability ratio of >15. Remarkably, this approach can be straightforwardly applied to other 2D materials.

Strong coupling of excitons and electric/magnetic toroidal dipole modes in perovskite metasurfaces

Effective manipulation of the interactions between light and matter is crucial for the advancement of various high-performance optoelectronic devices. It is noted that the toroidal dipole resonance refers to an electromagnetic excitation that exists beyond the conventional understanding of electric and magnetic multipoles, which shows great potential for enhancing light-matter interactions. In this work, we investigate the strong coupling properties of electric toroidal dipole (ETD) and magnetic toroidal dipole (MTD) with excitons in (PEA)2PbI4 perovskite metasurfaces. The nanostructure consists of two identical nanobars on a SiO2 substrate, which support ETD and MTD responses. The strong coupling between ETD/MTD modes and perovskite excitons is achieved when adjusting oscillator strength f0, which can be charactered by the clearly anti-crossing behavior appeared in the transmission spectra. The Rabi splitting can be readily tuned by controlling f0. When f0 increases to 1.0, their Rabi splitting values reach as high as 371 meV and 300 meV, respectively. The proposed strong coupling between excitons and ETD/MTDs paves the way for large-scale, low-cost integrated polaritonic devices operating at room temperature.

Excitons Enabled Topological Phase Singularity in a Single Atomic Layer

The nontrivial and rigorous Heaviside phase jump behavior of phase singularities (PSs) empowers exotic topological modes and widely divergent nature compared to neighboring points, which has attracted great attention in condensed matter physics as well as applications in photonics and ultrasensitive sensors. Here we demonstrate the universal existence of a family of topologically protected PSs generated from exciton resonances of single-atom layers. We obtain the PSs by coating the transition metal dichalcogenide (TMDC) monolayers on a nonabsorptive semi-infinite substrate without surface plasmon effect or other assisted resonators, which exploits the benefits of both exciton-dominated enhancement and peculiarities of the singular phase. We show that a refractive indices matched transparent substrate enables TMDC monolayers to exhibit topologically protected zero reflection accompanied by a perfect Heaviside π-phase jump at strong light adsorptions, which can be utilized to radically reduce the thickness of PS-based devices to a single atomic layer. By using the TMDC monolayer-based PSs for refractive index biosensors, we demonstrate its superior phase sensitivity at a level of 104 degrees per refractive index unit and detection of bioactive bacteria, respectively, which is comparable to the cutting-edge surface plasmon and Fabry-Perot resonance sensors. Our proof-of-concept results offer experimental and theoretical insights into a single atomic playground for flat singular optics and label-free biosensing technologies.

Magnetically controlled assembly: a new approach to organic integrated photonics

Hierarchical self-assembly of organic molecules or assemblies is of great importance for organic photonics to move from fundamental research to integrated and practical applications. Magnetic fields with the advantages of high controllability, non-contact manipulation, and instantaneous response have emerged as an elegant way to prepare organic hierarchical nanostructures. In this perspective, we outline the development history of organic photonic materials and highlight the importance of organic hierarchical nanostructures for a wide range of applications, including microlasers, optical displays, information encoding, sensing, and beyond. Then, we will discuss recent advances in magnetically controlled assembly for creating organic hierarchical nanostructures, with a particular focus on their potential for enabling the development of integrated photonic devices with unprecedented functionality and performance. Finally, we present several perspectives on the further development of magnetically controlled assembly strategies from the perspective of performance optimization and functional design of organic integrated photonics.

Optical Printing of Silicon Nanoparticles as Strain-Driven Nanopixels

Silicon nanoparticles (Si NPs) supporting Mie resonances exhibit vivid structural colors on the subwavelength scale. For future wearable devices, next generation Si-based optical units need to be dynamic and stretchable for display, sensing, or signal processing required by human-computer interaction. Here, by utilizing the distance-sensitive electromagnetic coupling of Mie resonances, we maximize the active tuning effect of Si NP-based structures including dimers, oligomers, and NPs on WS2, which we called Si nanopixels. Through the optical tweezers-assisted printing of Si nanopixels, patterns can be formed on arbitrary flexible substrates. The strain-sensitive tuning of scattering spectra indicates their promising application on strain sensing of various stretchable substrates via a simple "spray and test" process. In the case of Si nanopixels on polydimethylsiloxane (PDMS), local strains around 1% can be detected by a scattering measurement. Moreover, we demonstrate that the scattering intensity variation of Si nanopixels printed on wrinkled tungsten disulfide (WS2) is pixel-dependent and wavelength-dependent. This property facilitates the application of information encryption, and we demonstrate that three barcodes can be independently encoded into the R, G, and B scattering channels through ternary logic represented by the strain-tuning effects of scattering.

Ultrahigh-Q guided mode resonances in an All-dielectric metasurface

High quality(Q) factor optical resonators are indispensable for many photonic devices. While very large Q-factors can be obtained theoretically in guided-mode settings, free-space implementations suffer from various limitations on the narrowest linewidth in real experiments. Here, we propose a simple strategy to enable ultrahigh-Q guided-mode resonances by introducing a patterned perturbation layer on top of a multilayer-waveguide system. We demonstrate that the associated Q-factors are inversely proportional to the perturbation squared while the resonant wavelength can be tuned through material or structural parameters. We experimentally demonstrate such high-Q resonances at telecom wavelengths by patterning a low-index layer on top of a 220 nm silicon on insulator substrate. The measurements show Q-factors up to 2.39 × 10⁵, comparable to the largest Q-factor obtained by topological engineering, while the resonant wavelength is tuned by varying the lattice constant of the top perturbation layer. Our results hold great promise for exciting applications like sensors and filters.

Topological Metamaterials

The topological properties of an object, associated with an integer called the topological invariant, are global features that cannot change continuously but only through abrupt variations, hence granting them intrinsic robustness. Engineered metamaterials (MMs) can be tailored to support highly nontrivial topological properties of their band structure, relative to their electronic, electromagnetic, acoustic and mechanical response, representing one of the major breakthroughs in physics over the past decade. Here, we review the foundations and the latest advances of topological photonic and phononic MMs, whose nontrivial wave interactions have become of great interest to a broad range of science disciplines, such as classical and quantum chemistry. We first introduce the basic concepts, including the notion of topological charge and geometric phase. We then discuss the topology of natural electronic materials, before reviewing their photonic/phononic topological MM analogues, including 2D topological MMs with and without time-reversal symmetry, Floquet topological insulators, 3D, higher-order, non-Hermitian and nonlinear topological MMs. We also discuss the topological aspects of scattering anomalies, chemical reactions and polaritons. This work aims at connecting the recent advances of topological concepts throughout a broad range of scientific areas and it highlights opportunities offered by topological MMs for the chemistry community and beyond.

Van der Waals Heterostructures With Built-In Mie Resonances For Polarization-Sensitive Photodetection

Few-layer transition metal dichalcogenides (TMDs) and their combination as van der Waals heterostructures provide a promising platform for high-performance optoelectronic devices. However, the ultrathin thickness of TMD flakes limits efficient light trapping and absorption, which triggers the hybrid construction with optical resonant cavities for enhanced light absorption. The optical structure enriched photodetectors can also be wavelength- and polarization-sensitive but require complicated fabrication. Herein, a new-type TMD-based photodetector embedded with nanoslits is proposed to enhance light trapping. Taking ReS₂ as an example, strong anisotropic Mie-type optical responses arising from the intrinsic in-plane anisotropy and nanoslit-enhanced anisotropy are discovered. Owing to the nanoslit-enhanced optical resonances and band engineering, excellent photodetection performances are demonstrated with high responsivity of 27 A W^-1 and short rise/decay times of 3.7/3.7 ms. More importantly, through controlling the angle between the nanoslit orientation and the polarization direction to excite different resonant modes, polarization-sensitive photodetectors with anisotropy ratios from 5.9 to 12.6 can be achieved, representing one of the most polarization-sensitive TMD-based photodetectors. The depth and orientation of nanoslits are demonstrated crucial for optimizing the anisotropy ratio. The findings bring an effective scheme to construct high-performance and polarization-sensitive photodetectors.

Planar Optical Cavities Hybridized with Low-Dimensional Light-Emitting Materials

Low-dimensional light-emitting materials have been actively investigated due to their unprecedented optical and optoelectronic properties that are not observed in their bulk forms. However, the emission from low-dimensional light-emitting materials is generally weak and difficult to use in nanophotonic devices without being amplified and engineered by optical cavities. Along with studies on various planar optical cavities over the last decade, the physics of cavity-emitter interactions as well as various integration methods are investigated deeply. These integrations not only enhance the light-matter interaction of the emitters, but also provide opportunities for realizing nanophotonic devices based on the new physics allowed by low-dimensional emitters. In this review, the fundamentals, strengths and weaknesses of various planar optical resonators are first provided. Then, commonly used low-dimensional light-emitting materials such as 0D emitters (quantum dots and upconversion nanoparticles) and 2D emitters (transition-metal dichalcogenide and hexagonal boron nitride) are discussed. The integration of these emitters and cavities and the expect interplay between them are explained in the following chapters. Finally, a comprehensive discussion and outlook of nanoscale cavity-emitter integrated systems is provided.

Investigations of Optical Functions and Optical Transitions of 2D Semiconductors by Spectroscopic Ellipsometry and DFT

Optical functions and transitions are essential for a material to reveal the light-matter interactions and promote its applications. Here, we propose a quantitative strategy to systematically identify the critical point (CP) optical transitions of 2D semiconductors by combining the spectroscopic ellipsometry (SE) and DFT calculations. Optical functions and CPs are determined by SE, and connected to DFT band structure and projected density of states via equal-energy and equal-momentum lines. The combination of SE and DFT provides a powerful tool to investigate the CP optical transitions, including the transition energies and positions in Brillouin zone (BZ), and the involved energy bands and carries. As an example, the single-crystal monolayer WS₂ is investigated by the proposed method. Results indicate that six excitonic-type CPs can be quantitatively distinguished in optical function of the monolayer WS₂ over the spectral range of 245-1000 nm. These CPs are identified as direct optical transitions from three highest valence bands to three lowest conduction bands at high symmetry points in BZ contributed by electrons in S-3p and W-5d orbitals. Results and discussion on the monolayer WS₂ demonstrate the effectiveness and advantages of the proposed method, which is general and can be easily extended to other materials.

Optical Introduction and Manipulation of Plasmon-Exciton-Trion Coupling in a Si/WS2/Au Nanocavity

Strong plasmon-exciton coupling, which has potential applications in nanophotonics, plasmonics, and quantum electrodynamics, has been successfully demonstrated by using metallic nanocavities and two-dimensional materials. Dynamical control of plasmon-exciton coupling strength, especially by using optical methods, remains a big challenge although it is highly desirable. Here, we report the optical introduction and manipulation of plasmon-exciton-trion coupling realized in a dielectric-metal hybrid nanocavity, which is composed of a silicon (Si) nanoparticle and a thin gold (Au) film, with an embedded tungsten disulfide (WS₂) monolayer. We employ scattering and photoluminescence spectra to characterize the coupling strength between plasmons and excitons in Si/WS₂/Au nanocavities constructed by using Si nanoparticles with different diameters. We enhance the plasmon-exciton and plasmon-trion coupling strength by injecting excitons and trions into the WS₂ monolayer with a 488 nm laser beam. It is revealed that the emission intensities of excitons and trions with respect to the reference WS₂ monolayer can be modified through the change in the coupling strength induced by the laser light. Interestingly, the coupling strength between the plasmons and the excitons/trions can be manipulated from weak to strong coupling regime by simply increasing the laser power, which is clearly resolved in the scattering spectra of Si/WS₂/Au nanocavities. More importantly, the plasmon-exciton-trion coupling induced by the laser light is confirmed by the energy exchange between excitons and trions. Our findings indicate the possibility for optically manipulating plasmon-exciton interaction and suggest the practical applications of dielectric-metal hybrid nanocavities in nanoscale plasmonic devices.

Superacid Treatment on Transition Metal Dichalcogenides

Superacids are strong acids with an acidity higher than pure sulfuric acid. Recently, superacid treatment of monolayer transition metal dichalcogenide (TMDC) flakes, such as MoS2 and WS2, has shown a dramatic enhancement of optical properties, such as photoluminescence (PL) intensity. The superacid molecule is bis(trifluoromethane)sulfonimide (TFSI). In this review paper, we summarize and discuss the recent works and the current understanding of the TFSI treatment, and finally, we describe the outlook of the treatment on monolayer TMDCs.

Perfect Photon Indistinguishability from a Set of Dissipative Quantum Emitters

Single photon sources (SPS) based on semiconductor quantum dot (QD) platforms are restricted to low temperature (T) operation due to the presence of strong dephasing processes. Although the integration of QD in optical cavities provides an enhancement of its emission properties, the technical requirements for maintaining high indistinguishability (I) at high T are still beyond the state of the art. Recently, new theoretical approaches have shown promising results by implementing two-dipole-coupled-emitter systems. Here, we propose a platform based on an optimized five-dipole-coupled-emitter system coupled to a cavity which enables perfect I at high T. Within our scheme the realization of perfect I single photon emission with dissipative QDs is possible using well established photonic platforms. For the optimization procedure we have developed a novel machine-learning approach which provides a significant computational-time reduction for high demanding optimization algorithms. Our strategy opens up interesting possibilities for the optimization of different photonic structures for quantum information applications, such as the reduction of quantum decoherence in clusters of coupled two-level quantum systems.

Inducing Strong Light-Matter Coupling and Optical Anisotropy in Monolayer MoS2 with High Refractive Index Nanowire

Mixed-dimensional heterostructures combine the merits of materials of different dimensions; therefore, they represent an advantageous scenario for numerous technological advances. Such an approach can be exploited to tune the physical properties of two-dimensional (2D) layered materials to create unprecedented possibilities for anisotropic and high-performance photonic and optoelectronic devices. Here, we report a new strategy to engineer the light-matter interaction and symmetry of monolayer MoS₂ by integrating it with one-dimensional (1D) AlGaAs nanowire (NW). Our results show that the photoluminescence (PL) intensity of MoS₂ increases strongly in the mixed-dimensional structure because of electromagnetic field confinement in the 1D high refractive index semiconducting NW. Interestingly, the 1D NW breaks the 3-fold rotational symmetry of MoS₂, which leads to a strong optical anisotropy of up to ∼60%. Our mixed-dimensional heterostructure-based phototransistors benefit from this and exhibit an improved optoelectronic device performance with marked anisotropic photoresponse behavior. Compared with bare MoS₂ devices, our MoS₂/NW devices show ∼5 times enhanced detectivity and ∼3 times higher photoresponsivity. Our results of engineering light-matter interaction and symmetry breaking provide a simple route to induce enhanced and anisotropic functionalities in 2D materials.

Numerical Optimization of a Nanophotonic Cavity by Machine Learning for Near-Unity Photon Indistinguishability at Room Temperature

Room-temperature (RT), on-chip deterministic generation of indistinguishable photons coupled to photonic integrated circuits is key for quantum photonic applications. Nevertheless, high indistinguishability (I) at RT is difficult to obtain due to the intrinsic dephasing of most deterministic single-photon sources (SPS). Here, we present a numerical demonstration of the design and optimization of a hybrid slot-Bragg nanophotonic cavity that achieves a theoretical near-unity I and a high coupling efficiency (β) at RT for a variety of single-photon emitters. Our numerical simulations predict modal volumes in the order of 10^-3(λ/2n)³, allowing for strong coupling of quantum photonic emitters that can be heterogeneously integrated. We show that high I and β should be possible by fine-tuning the quality factor (Q) depending on the intrinsic properties of the single-photon emitter. Furthermore, we perform a machine learning optimization based on the combination of a deep neural network and a genetic algorithm (GA) to further decrease the modal volume by almost 3 times while relaxing the tight dimensions of the slot width required for strong coupling. The optimized device has a slot width of 20 nm. The design requires fabrication resolution in the limit of the current state-of-the-art technology. Also, the condition for high I and β requires a positioning accuracy of the quantum emitter at the nanometer level. Although the proposal is not a scalable technology, it can be suitable for experimental demonstration of single-photon operation.