In vitro precultivation alleviates post-implantation inflammation and enhances development of tissue-engineered tubular cartilage

Precise Engineering of Growth Factor Presentation Using Extracellular Microenvironment-Mimicking Microfluidic Microparticles

One of the main challenges in tissue engineering is finding a way to deliver specific growth factors (GFs) with precise spatiotemporal control over their presentation. Here, we report a novel strategy for generating microscale carriers with enhanced affinity for high content loading suitable for the sustained and localized delivery of GFs. Our developed microparticles can be injected locally and sustainably release encapsulated growth factors for up to 28 days. Fine-tuning of particles' size, affinity, microstructures, and release kinetics is achieved using a microfluidic system along with bioconjugation techniques. We also describe an innovative 3D micromixer platform to control the formation of core-shell particles based on superaffinity using a polymer-peptide conjugate for further tuning of release kinetics and delayed degradation. Chitosan shells block the burst release of encapsulated GFs and enable their sustained delivery for up to 10 days. The matched release profiles and degradation provide the local tissues with biomimetic, developmental-biologic-compatible signals to maximize regenerative effects. The versatility of this approach is verified using three different therapeutic proteins, including human bone morphogenetic protein-2 (rhBMP-2), vascular endothelial growth factor (VEGF), and stromal cell-derived factor 1 (SDF-1α). As in vivo morphogenesis is typically driven by the combined action of several growth factors, the proposed technique can be developed to generate a library of GF-loaded particles with designated release profiles.

A cell-free tissue-engineered tracheal substitute with sequential cytokine release maintained airway opening in a rabbit tracheal full circumferential defect model

In this study, a cell-free tissue-engineered tracheal substitute was developed, which is based on a 3D-printed polycaprolactone scaffold coated with a gelatin-methacryloyl (GelMA) hydrogel, with transforming growth factor-β1 (TGF-β) and stromal cell-derived factor-1α (SDF-1) sequentially embedded, to facilitate cell recruitment and differentiation toward chondrocyte-phenotype. TGF-β was loaded onto polydopamine particles, and then encapsulated into the GelMA together with SDF-1, and called G/S/P@T, which was used to coat 3D-printed PCL scaffold to form the tracheal substitute. A rapid release of SDF-1 was observed during the first week, followed by a slow and sustained release of TGF-β for approximately four weeks. The tracheal substitute significantly promoted the recruitment of mesenchymal stromal cells (MSCs) or human bronchial epithelial cells in vitro, and enhanced the ability of MSCs to differentiate towards chondrocyte phenotype. Implantation of the tissue-engineered tracheal substitute with a rabbit tracheal anterior defect model improved regeneration of airway epithelium, recruitment of endogenous MSCs and expression of markers of chondrocytes at the tracheal defect site. Moreover, the tracheal substitute maintained airway opening for 4 weeks in a tracheal full circumferential defect model with airway epithelium coverage at the defect sites without granulation tissue accumulation in the tracheal lumen or underneath. The promising results suggest that this simple, cell-free tissue-engineered tracheal substitute can be used directly after tracheal defect removal and should be further developed towards clinical application.

Recent advances in modified poly (lactic acid) as tissue engineering materials

As an emerging science, tissue engineering and regenerative medicine focus on developing materials to replace, restore or improve organs or tissues and enhancing the cellular capacity to proliferate, migrate and differentiate into different cell types and specific tissues. Renewable resources have been used to develop new materials, resulting in attempts to produce various environmentally friendly biomaterials. Poly (lactic acid) (PLA) is a biopolymer known to be biodegradable and it is produced from the fermentation of carbohydrates. PLA can be combined with other polymers to produce new biomaterials with suitable physicochemical properties for tissue engineering applications. Here, the advances in modified PLA as tissue engineering materials are discussed in light of its drawbacks, such as biological inertness, low cell adhesion, and low degradation rate, and the efforts conducted to address these challenges toward the design of new enhanced alternative biomaterials.

The Immunosuppressive Niche Established with a Curcumin-Loaded Electrospun Nanofibrous Membrane Promotes Cartilage Regeneration in Immunocompetent Animals

Inflammatory cells mount an immune response against in vitro engineered cartilage implanted into immunocompetent animals, consequently limiting the usage of tissue-engineered cartilage to repair cartilage defects. In this study, curcumin (Cur)-an anti-inflammatory agent-was mixed with poly(lactic-co-glycolic acid) (PLGA) to develop a Cur/PLGA nanofibrous membrane with nanoscale pore size and anti-inflammatory properties. Fourier-transform infrared spectroscopy and high-performance liquid chromatography analyses confirmed the successful loading of Cur into the Cur/PLGA nanofibrous membrane. The results of the in vitro assay demonstrated the sustained release kinetics and enhanced stability of Cur in the Cur/PLGA nanofibrous membrane. Western blotting and enzyme-linked immunosorbent assay analyses revealed that the Cur/PLGA nanofibrous membrane significantly downregulated the expression of inflammatory cytokines (IL-1β, IL-6, and TNF-α). A chondrocyte suspension was seeded into a porous PLGA scaffold, and the loaded scaffold was cultured for 3 weeks in vitro to engineer cartilage tissues. The cartilage was packed with the in vitro engineered Cur/PLGA nanofibrous membrane and subcutaneously implanted into rats to generate an immunosuppressive niche. Compared with those in the PLGA-implanted and pure cartilage (without nanofibrous membrane package)-implanted groups, the cartilage was well preserved and the inflammatory response was suppressed in the Cur/PLGA-implanted group at weeks 2 and 4 post-implantation. Thus, this study demonstrated that packaging the cartilage with the Cur/PLGA nanofibrous membrane effectively generated an immunosuppressive niche to protect the cartilage against inflammatory invasion. These findings enable the clinical translation of tissue-engineered cartilage to repair cartilage defects.

An Injectable Platform of Engineered Cartilage Gel and Gelatin Methacrylate to Promote Cartilage Regeneration

Cell–hydrogel constructs are frequently used as injectable platforms for irregular cartilage regeneration. However, cell–hydrogel constructs have obvious disadvantages, such as long culture times, high probability of infection, and poor cartilage formation capacity, significantly limiting their clinical translation. In this study, we aimed to develop a novel injectable platform comprising engineered cartilage gel (ECG) and gelatin methacrylate (GelMA) to improve cartilage regeneration. We first prepared an ECG by cutting the in vitro engineered cartilage sheet into pieces. The chondrocytes and ECG were evenly encapsulated into GelMA to form Cell-GelMA and ECG-GelMA constructs. The ECG-GelMA construct exhibited preferred gel characteristics and superior biocompatibility compared with the Cell-GelMA construct counterpart. After subcutaneous implantation in nude mice and goat, both gross views and histological evaluations showed that the ECG-GelMA construct achieved more homogenous, stable, and mature cartilage regeneration than the Cell-GelMA construct. Immunological evaluations showed that ECG-GelMA had a mitigatory immunologic reaction than the Cell-GelMA construct. Overall, the results suggest that the ECG-GelMA is a promising injectable platform for cartilage regeneration that may advance clinical translation.

Tissue Engineering for Tracheal Replacement: Strategies and Challenges

The critical feature in trachea replacement is to provide a hollow cylindrical framework that is laterally stable and longitudinally flexible, facilitating cartilage and epithelial tissue formation. Despite advanced techniques and sources of materials used, most inherent challenges are related to the complexity of its anatomy. Limited blood supply leads to insufficient regenerative capacity for cartilage and epithelium. Natural and synthetic scaffolds, different types of cells, and growth factors are part of tissue engineering approaches with varying outcomes. Pre-vascularization remains one of the crucial factors to expedite the regenerative process in tracheal reconstruction. This review discusses the challenges and strategies used in tracheal tissue engineering, focusing on scaffold implantation in clinical and preclinical studies conducted in recent decades.

Subcutaneous Regeneration of Engineered Cartilage: A Comparison of Cell Sheets and Chondrocyte-Scaffold Constructs in a Porcine Model

BACKGROUND

Stable cartilage regeneration in immunocompetent large animals remains a bottleneck problem that restricts clinical application. The inflammation elicited by degradation products of scaffolds has a decisive influence on cartilage formation. Although prolonged preculture in vitro could form mature engineered cartilage and allow sufficient degradation of scaffolds, the inflammatory reaction was still observed. This study explored the feasibility of using chondrocyte sheet technology to regenerate stable cartilage in the subcutaneous environment with a pig model.

METHODS

Passage 1 chondrocytes were used to form cell sheets by high-density culture. As a control, chondrocytes were seeded onto polyglycolic acid/polylactic acid scaffolds for 6 and 12 weeks' in vitro preculture, respectively. Then, they were autologously implanted subcutaneously into pigs for 2, 8, and 24 weeks. Gross view, histologic staining, and biochemical and biomechanical characteristics were evaluated.

RESULTS

With prolonged culture in vitro, relatively homogeneous engineered cartilages were formed with less scaffold residue. However, the chondrocyte-polyglycolic acid/polylactic acid group still encountered severe inflammation and inferior cartilage formation at 2 and 8 weeks in vivo. The engineered cartilage with cell sheet technique exhibited a relatively more stable and mature tissue structure without obvious inflammatory response at 24 weeks in vivo, which was similar to the native auricular cartilage.

CONCLUSIONS

The chondrocyte sheet technique could successfully regenerate mature and stable engineered cartilages in pig models. It is possibly an effective method of repairing cartilage defects in the clinic that uses regenerated substitutes derived from autologous cell sheets.

Tissue Engineering for Mimics and Modulations of Immune Functions

In the field of regenerative medicine, advances in tissue engineering have surpassed the reconstruction of individual tissues or organs and begun to work towards engineering systemic factors such as immune objects and functions. The immune system plays a crucial role in protecting and regulating systemic functions in the human body. Engineered immune tissues and organs have shown potential in recovering dysfunctions and aplasia of the immune system and the evasion from immune-mediated inflammatory responses and rejection elicited by engineered implants from allogeneic or xenogeneic sources are also being pursued to facilitate clinical transplantation of tissue engineered grafts. Here, current progress in tissue engineering to mimic or modulate immune functions is reviewed and elaborated from two perspectives: 1) engineering of immune tissues and organs per se and 2) immune evasion of host immunoinflammatory rejection by tissue-engineered implants.

Long-segmental tracheal reconstruction in rabbits with pedicled Tissue-engineered trachea based on a 3D-printed scaffold

Long-segmental tracheal defects constitute an intractable clinical problem, due to the lack of satisfactory tracheal substitutes for surgical reconstruction. Tissue engineered artificial substitutes could represent a promising approach to tackle this challenge. In our current study, tissue-engineered trachea, based on a 3D-printed poly (l-lactic acid) (PLLA) scaffold with similar morphology to the native trachea of rabbits, was used for segmental tracheal reconstruction. The 3D-printed scaffolds were seeded with chondrocytes obtained from autologous auricula, dynamically pre-cultured in vitro for 2 weeks, and pre-vascularized in vivo for another 2 weeks to generate an integrated segmental trachea organoid unit. Then, segmental tracheal defects in rabbits were restored by transplanting the engineered tracheal substitute with pedicled muscular flaps. We found that the combination of in vitro pre-culture and in vivo pre-vascularization successfully generated a segmental tracheal substitute with bionic structure and mechanical properties similar to the native trachea of rabbits. Moreover, the stable blood supply provided by the pedicled muscular flaps facilitated the survival of chondrocytes and accelerated epithelialization, thereby improving the survival rate. The segmental trachea substitute engineered by a 3D-printed scaffold, in vitro pre-culture, and in vivo pre-vascularization enhanced survival in an early stage post-operation, presenting a promising approach for surgical reconstruction of long segmental tracheal defects. STATEMENT OF SIGNIFICANCE: We found that the combination of in vitro pre-culture and in vivo pre-vascularization successfully generated a segmental tracheal substitute with bionic structure and mechanical properties similar to the native trachea of rabbits. Moreover, the stable blood supply provided by the pedicled muscular flaps facilitated the survival of chondrocytes and accelerated epithelialization, thereby improving the survival rate of the rabbits. The segmental trachea substitute engineered by a 3D-printed scaffold, in vitro pre-culture, and in vivo pre-vascularization enhanced survival in an early stage post-operation, presenting a promising approach for surgical reconstruction of long segmental tracheal defects.

Regeneration of trachea graft with cartilage support, vascularization, and epithelization

The repair and functional reconstruction of long-segment tracheal defects is always a great challenge in the clinic. Finding an ideal substitute for tracheal transplantation is the only way to solve this problem. The current study proposed a series of novel strategies for constructing a bionic living trachea substitute. For the issue of tubular cartilage support, cartilage sheet technique based on high-density culture of chondrocytes was adopted to avoid the inflammatory reaction triggered by the materials and thus formed mature cartilage-like tissue in autologous goat model. For the issue of epithelialization, the autologous transplantation of oral mucosal epithelium was used to realize mucosa coverage of the constructed trachea lumen. Finally, the flat trapezius fascia flap with double blood supply was separated by microsurgical techniques to achieve stable pre-vascularization of both the regenerated cartilage and the grafted epithelium simultaneously. By integrating the above strategies, the vascularized and epithelialized tracheal substitute with tubular cartilage support was successfully constructed in a goat model. The reconstructed trachea possessed a multiple layer structure of muscle-cartilage-fascia-mucosa comparable to the native trachea, and thus might realize stable survival and long-term airway function maintenance, providing a promising tracheal substitute for the repair and permanent functional reconstruction of long-segment tracheal defects. STATEMENT OF SIGNIFICANCE: The repair of long-segment tracheal defects is always a great challenge in the clinic. Finding an ideal substitute for tracheal transplantation is the only way to solve this problem. In the current study, by technical integration of cartilage regeneration, microsurgery, and oral mucosa transplantation, a complex tracheal substitute with satisfactory vascularization, epithelialization, and tubular cartilage support was successfully constructed in a goat autologous model. The reconstructed trachea substitute possessed a multiple layer structure of muscle-cartilage-fascia-mucosa exactly similar to native trachea, and thus might realize stable survival and long-term airway function maintenance. The current study provides feasible strategies and ideal tracheal substitutes for permanent functional reconstruction of long-segmental trachea defects.

Chondrocyte Culture Parameters for Matrix-Assisted Autologous Chondrocyte Implantation Affect Catabolism and Inflammation in a Rabbit Model

Cartilage defects represent an increasing pathology among active individuals that affects the ability to contribute to sports and daily life. Cell therapy, such as autologous chondrocyte implantation (ACI), is a widespread option to treat larger cartilage defects still lacking standardization of in vitro cell culture parameters. We hypothesize that mRNA expression of cytokines and proteases before and after ACI is influenced by in vitro parameters: cell-passage, cell-density and membrane-holding time. Knee joint articular chondrocytes, harvested from rabbits (n = 60), were cultured/processed under varying conditions: after three different cell-passages (P1, P3, and P5), cells were seeded on 3D collagen matrices (approximately 25 mm³) at three different densities (2 × 10⁵/matrix, 1 × 10⁶/matrix, and 3 × 10⁶/matrix) combined with two different membrane-holding times (5 h and two weeks) prior autologous transplantation. Those combinations resulted in 18 different in vivo experimental groups. Two defects/knee/animal were created in the trochlear groove (defect dimension: ∅ 4 mm × 2 mm). Four identical cell-seeded matrices (CSM) were assembled and grouped in two pairs: One pair giving pre-operative in vitro data (CSM-i), the other pair was implanted in vivo and harvested 12 weeks post-implantation (CSM-e). CSMs were analyzed for TNF-α, IL-1β, MMP-1, and MMP-3 via qPCR. CSM-i showed higher expression of IL-1β, MMP-1, and MMP-3 compared to CSM-e. TNF-α expression was higher in CSM-e. Linearity between CSM-i and CSM-e values was found, except for TNF-α. IL-1β expression was higher in CSM-i at higher passage and longer membrane-holding time. IL-1β expression decreased with prolonged membrane-holding time in CSM-e. For TNF-α, the reverse was true. Lower cell-passages and lower membrane-holding time resulted in stronger TNF-α expression. Prolonged membrane-holding time resulted in increased MMP levels among CSM-i and CSM-e. Cellular density was of no significant effect. We demonstrated cytokine and MMP expression levels to be directly influenced by in vitro culture settings in ACI. Linearity of expression-patterns between CSM-i and CSM-e may predict ACI regeneration outcome in vivo. Cytokine/protease interaction within the regenerate tissue could be guided via adjusting in vitro culture parameters, of which membrane-holding time resulted the most relevant one.

Pre-culture of adipose-derived stem cells and heterologous acellular dermal matrix: paracrine functions promote post-implantation neovascularization and attenuate inflammatory response

Heterologous acellular dermal matrix (ADM) has good biocompatibility and sufficient strength for clinical use for the repair of defects, tissue filling, and resurfacing of deep wounds. However, ADM tissue has such a compact structure that it can easily result in delayed vascularization after implantation. Moreover, in spite of the low immunogenicity of heterologous ADM, it can still cause varying degrees of inflammation in the host. These two drawbacks limit the efficacy and scope of clinical applications for heterologous ADM. Adipose-derived stem cells (ADSCs) have multiple effects on promoting vascularization and regulating immunological responses through paracrine signaling. Pre-culturing heterologous ADM with ADSCs may address these problems; however, it is unknown if ADSCs can exert their paracrine functions within a heterologous ADM microenvironment. This study examined the effect of porcine ADM (PADM) on the paracrine function of rat ADSCs (rADSCs) and showed that the expression of genes associated with inflammatory regulation, pro-angiogenesis factors, and stemness increased when rADSCs were seeded on PADM compared to rADSCs seeded on microplates. This indicates that PADM can provide a beneficial microenvironment for ADSCs to exert their paracrine function. After pre-culture, in vivo implanted rADSC-PADM exhibited improved vascularization and mitigated inflammatory response compared to untreated PADM. This study is the first to report that ADM can provide a suitable microenvironment for ADSCs and that pre-culturing improved the ADM implantation quality in vivo. These results suggest that it could be possible to apply heterologous ADM more effectively and broadly for repair and reconstruction treatments.

Porous decellularized trachea scaffold prepared by a laser micropore technique

Rapid development of tissue engineering technology provides new methods for tracheal cartilage regeneration. However, the current lack of an ideal scaffold makes engineering of trachea cartilage tissue into a three-dimensional (3-D) tubular structure a great challenge. Although a decellularized trachea matrix (DTM) has become a recognized scaffold for trachea cartilage regeneration, it is difficult for cells to detach from or penetrate the matrix because of its non-porous structure. To tackle these problems, a laser micropore technique (LMT) was applied in the current study to enhance trachea sample porosity, and facilitate decellularizing treatment and cell ingrowth. Furthermore, after optimizing LMT and decellularizing treatment parameters, LMT-treated DTM (LDTM) retained its natural tubular structure with only minor extracellular matrix damage. Moreover, compared with DTM, the current study showed that LDTM significantly improved the adherence rate of cells with perfect cell biocompatibility. Moreover, the optimal implantation cell density for chondrogenesis with LDTM was determined to be 1 × 10⁸ cells/ml. Collectively, the results suggest that the novel LDTM is an ideal scaffold for trachea tissue engineering.

In Vitro Regeneration of Patient-specific Ear-shaped Cartilage and Its First Clinical Application for Auricular Reconstruction

Microtia is a congenital external ear malformation that can seriously influence the psychological and physiological well-being of affected children. The successful regeneration of human ear-shaped cartilage using a tissue engineering approach in a nude mouse represents a promising approach for auricular reconstruction. However, owing to technical issues in cell source, shape control, mechanical strength, biosafety, and long-term stability of the regenerated cartilage, human tissue engineered ear-shaped cartilage is yet to be applied clinically. Using expanded microtia chondrocytes, compound biodegradable scaffold, and in vitro culture technique, we engineered patient-specific ear-shaped cartilage in vitro. Moreover, the cartilage was used for auricle reconstruction of five microtia patients and achieved satisfactory aesthetical outcome with mature cartilage formation during 2.5years follow-up in the first conducted case. Different surgical procedures were also employed to find the optimal approach for handling tissue engineered grafts. In conclusion, the results represent a significant breakthrough in clinical translation of tissue engineered human ear-shaped cartilage given the established in vitro engineering technique and suitable surgical procedure. This study was registered in Chinese Clinical Trial Registry (ChiCTR-ICN-14005469).

In Vitro Regeneration of Patient-specific Ear-shaped Cartilage and Its First Clinical Application for Auricular Reconstruction

Microtia is a congenital external ear malformation that can seriously influence the psychological and physiological well-being of affected children. The successful regeneration of human ear-shaped cartilage using a tissue engineering approach in a nude mouse represents a promising approach for auricular reconstruction. However, owing to technical issues in cell source, shape control, mechanical strength, biosafety, and long-term stability of the regenerated cartilage, human tissue engineered ear-shaped cartilage is yet to be applied clinically. Using expanded microtia chondrocytes, compound biodegradable scaffold, and in vitro culture technique, we engineered patient-specific ear-shaped cartilage in vitro. Moreover, the cartilage was used for auricle reconstruction of five microtia patients and achieved satisfactory aesthetical outcome with mature cartilage formation during 2.5 years follow-up in the first conducted case. Different surgical procedures were also employed to find the optimal approach for handling tissue engineered grafts. In conclusion, the results represent a significant breakthrough in clinical translation of tissue engineered human ear-shaped cartilage given the established in vitro engineering technique and suitable surgical procedure.

This study was registered in Chinese Clinical Trial Registry (ChiCTR-ICN-14005469).

•

Patient-specific ear-shaped cartilage was engineered in vitro using expanded MCs and compound biodegradable scaffold.

•

The first microtia case treated with the tissue engineered ear-shaped cartilage was follow-up for 2.5 years.

•

Other four cases with similar and different surgical procedures were also presented.

Microtia is a congenital external ear malformation that can seriously influence the psychological and physiological well-being of affected children. Using expanded microtia chondrocytes, compound biodegradable scaffold, and in vitro culture technique, we engineered patient-specific ear-shaped cartilage in vitro, and performed a pilot clinical trial of auricle reconstruction using the engineered ear cartilage on five patients. Satisfactory aesthetical outcome with mature cartilage formation was achieved with the longest follow-up of 2.5 years.

Cell yield, chondrogenic potential, and regenerated cartilage type of chondrocytes derived from ear, nasoseptal, and costal cartilage

Functional reconstruction of large cartilage defects in subcutaneous sites remains clinically challenging because of limited donor cartilage. Tissue engineering is a promising and widely accepted strategy for cartilage regeneration. To date, however, this strategy has not achieved a significant breakthrough in clinical translation owing to a lack of detailed preclinical data on cell yield and functionality of clinically applicable chondrocytes. To address this issue, the current study investigated the initial cell yield, proliferative potential, chondrogenic capacity, and regenerated cartilage type of human chondrocytes derived from auricular, nasoseptal, and costal cartilage using a scaffold-free cartilage regeneration model (cartilage sheet). Chondrocytes from all sources exhibited high sensitivity to basic fibroblast growth factor within 8 passages. Nasoseptal chondrocytes presented the strongest proliferation rate, whereas auricular chondrocytes obtained the highest total cell amount using comparable cartilage sample weights. Importantly, all chondrocytes at fifth passage showed strong chondrogenic capacity both in vitro and in the subcutaneous environment of nude mice. Although some significant differences in histological structure, cartilage matrix content and cartilage type specific proteins were observed between the in vitro engineered cartilage and original tissue; the in vivo regenerated cartilage showed mature cartilage features with high similarity to their original native tissue, except for minor matrix changes influenced by the in vivo environment. The current study provides detailed preclinical data for choice of chondrocyte source and thus promotes the clinical translation of cartilage regeneration approach.

Vascular Endothelial Growth Factor Sequestration Enhances In Vivo Cartilage Formation

Autologous chondrocyte transplantation for cartilage repair still has unsatisfactory clinical outcomes because of inter-donor variability and poor cartilage quality formation. Re-differentiation of monolayer-expanded human chondrocytes is not easy in the absence of potent morphogens. The Vascular Endothelial Growth Factor (VEGF) plays a master role in angiogenesis and in negatively regulating cartilage growth by stimulating vascular invasion and ossification. Therefore, we hypothesized that its sole microenvironmental blockade by either VEGF sequestration by soluble VEGF receptor-2 (Flk-1) or by antiangiogenic hyperbranched peptides could improve chondrogenesis of expanded human nasal chondrocytes (NC) freshly seeded on collagen scaffolds. Chondrogenesis of several NC donors was assessed either in vitro or ectopically in nude mice. VEGF blockade appeared not to affect NC in vitro differentiation, whereas it efficiently inhibited blood vessel ingrowth in vivo. After 8 weeks, in vivo glycosaminoglycan deposition was approximately two-fold higher when antiangiogenic approaches were used, as compared to the control group. Our data indicates that the inhibition of VEGF signaling, independently of the specific implementation mode, has profound effects on in vivo NC chondrogenesis, even in the absence of chondroinductive signals during prior culture or at the implantation site.

Tissue engineering of a composite trachea construct using autologous rabbit chondrocytes

The repair of large tracheal segmental defects remains an unsolved problem. The goal of this study is to apply tissue engineering principles for the fabrication of large segmental trachea replacements. Engineered tracheal replacements composed of autologous cells (neotracheas) were tested in a New Zealand White rabbit model. Neotracheas were formed in the rabbit neck by wrapping a silicone tube with consecutive layers of skin epithelium, platysma muscle, and an engineered cartilage sheet and allowing the construct to mature for 8-12 weeks. In total, 28 rabbits were implanted and the neotracheas assessed for tissue morphology. In 11 cases, neotracheas deemed sufficiently strong were used to repair segmental tracheal defects. Initially, the success rate of producing structurally sound neotracheas was impeded by physical disruption of the cartilage sheets during animal handling, but by the end of the study, 15 of 18 neotracheas (83.3%) were structurally sound. Of the 15 structurally sound neotracheas, 11 were used for segmental reconstruction and were left in place for up to 21 days. Histological examination showed the presence of variable amounts of viable epithelium, a vascularized platysma flap, and a layer of safranin O-positive cartilage along with evidence of endochondral ossification. Rabbits that had undergone segmental reconstruction showed good tracheal integration, had a viable epithelium with vascular support, and the cartilage was sufficiently strong to maintain a lumen when palpated. The results demonstrated that viable, trilayered, scaffold-free neotracheas could be constructed from autologous cells and could be integrated into native trachea to repair a segmental defect.

Stable subcutaneous cartilage regeneration of bone marrow stromal cells directed by chondrocyte sheet

In vivo niche plays an important role in regulating differentiation fate of stem cells. Due to lack of proper chondrogenic niche, stable cartilage regeneration of bone marrow stromal cells (BMSCs) in subcutaneous environments is always a great challenge. This study explored the feasibility that chondrocyte sheet created chondrogenic niche retained chondrogenic phenotype of BMSC engineered cartilage (BEC) in subcutaneous environments. Porcine BMSCs were seeded into biodegradable scaffolds followed by 4weeks of chondrogenic induction in vitro to form BEC, which were wrapped with chondrocyte sheets (Sheet group), acellular small intestinal submucosa (SIS, SIS group), or nothing (Blank group) respectively and then implanted subcutaneously into nude mice to trace the maintenance of chondrogenic phenotype. The results showed that all the constructs in Sheet group displayed typical cartilaginous features with abundant lacunae and cartilage specific matrices deposition. These samples became more mature with prolonged in vivo implantation, and few signs of ossification were observed at all time points except for one sample that had not been wrapped completely. Cell labeling results in Sheet group further revealed that the implanted BEC directly participated in cartilage formation. Samples in both SIS and Blank groups mainly showed ossified tissue at all time points with partial fibrogenesis in a few samples. These results suggested that chondrocyte sheet could create a chondrogenic niche for retaining chondrogenic phenotype of BEC in subcutaneous environment and thus provide a novel research model for stable ectopic cartilage regeneration based on stem cells.

STATEMENT OF SIGNIFICANCE

In vivo niche plays an important role in directing differentiation fate of stem cells. Due to lack of proper chondrogenic niche, stable cartilage regeneration of bone marrow stromal cells (BMSCs) in subcutaneous environments is always a great challenge. The current study demonstrated that chondrocyte sheet generated by high-density culture of chondrocytes in vitro could cearte a chondrogenic niche in subcutaneous environment and efficiently retain the chondrogenic phenotype of in vitro BMSC engineered cartilage (vitro-BEC). Furthermore, cell tracing results revealed that the regenerated cartilage mainly derived from the implanted vitro-BEC. The current study not only proposes a novel research model for microenvironment simulation but also provides a useful strategy for stable ectopic cartilage regeneration of stem cells.

Reconstruction of defects of the trachea

The trachea has a complex anatomy to fulfill its tasks. Its unique fibro-cartilaginous structure maintains an open conduit during respiration, and provides vertical elasticity for deglutition, mobility of the neck and speech. Blood vessels pierce the intercartilaginous ligaments to perfuse the ciliated epithelium, which ensures effective mucociliary clearance. Removal of a tracheal segment affected by benign or malignant disease requires airtight restoration of the continuity of the tube. When direct approximation of both tracheal ends is no longer feasible, a reconstruction is needed. This may occur in recurrent short-segment defects in a scarred environment, or in defects comprising more than half the length of the trachea. The resulting gap must be filled with vascularized tissue that restores the mucosal lining and supports the semi-rigid, semi-flexible framework of the trachea. For long-segment or circular defects, restoration of this unique biomechanical profile becomes even more important. Due to the inherent difficulty of creating such a tube, a tracheostomy or palliative stenting are often preferred over permanent reconstruction. To significantly improve and sustain quality of life of these patients, surgeons proposed innovative strategies for complex tracheal repair. In this review, we provide an overview of current clinical applications of tracheal repair using autologous and allogenic tissues. We look at recent advances in the field of tissue engineering, and the areas for improvement of these first human applications. Lastly, we highlight the focus of our research, in an effort to contribute to the development of optimized tracheal reconstructive techniques.

Repair of osteochondral defects with in vitro engineered cartilage based on autologous bone marrow stromal cells in a swine model

Functional reconstruction of large osteochondral defects is always a major challenge in articular surgery. Some studies have reported the feasibility of repairing articular osteochondral defects using bone marrow stromal cells (BMSCs) and biodegradable scaffolds. However, no significant breakthroughs have been achieved in clinical translation due to the instability of in vivo cartilage regeneration based on direct cell-scaffold construct implantation. To overcome the disadvantages of direct cell-scaffold construct implantation, the current study proposed an in vitro cartilage regeneration strategy, providing relatively mature cartilage-like tissue with superior mechanical properties. Our strategy involved in vitro cartilage engineering, repair of osteochondral defects, and evaluation of in vivo repair efficacy. The results demonstrated that BMSC engineered cartilage in vitro (BEC-vitro) presented a time-depended maturation process. The implantation of BEC-vitro alone could successfully realize tissue-specific repair of osteochondral defects with both cartilage and subchondral bone. Furthermore, the maturity level of BEC-vitro had significant influence on the repaired results. These results indicated that in vitro cartilage regeneration using BMSCs is a promising strategy for functional reconstruction of osteochondral defect, thus promoting the clinical translation of cartilage regeneration techniques incorporating BMSCs.

Prolonged in vitro precultivation alleviates post-implantation inflammation and promotes stable subcutaneous cartilage formation in a goat model

Synthetic biodegradable scaffolds such as polylactic acid coated polyglycolic acid (PLA-PGA) are especially suitable for engineering shaped cartilage such as auricle, but they induce a serious inflammatory reaction particularly in the immunologically aggressive subcutaneous site, leading to resorption of the engineered autologous cartilage. Our previous study in a rabbit model has demonstrated 2 weeks of in vitro precultivation could significantly alleviate the post-implantation inflammation induced by PLA-PGA engineered cartilaginous grafts, but reproduction of this result failed in a preclinical goat model. The aims of the current study were to investigate whether prolonged in vitro precultivation could form a mature cartilaginous graft to resist the acute host response and promote stable subcutaneous cartilage formation in a preclinical goat model. Goat chondrocytes were seeded onto PLA-PGA scaffolds, in vitro precultivated for 2, 4, 8, and 12 weeks, and then implanted subcutaneously in autologous goats for 1 and 8 weeks. The in vitro engineered cartilage (vitro-EC) was examined histologically (hematoxylin and eosin, safranin-O, collagen II). The 1 week explants were examined histologically and stained for CD3, CD68, collagen I, and apoptosis. The 8 week explants were evaluated by histology, wet weight, volume, glycosaminoglycan (GAG) quantification and Young's modulus. With prolonged in vitro time, the quality of vitro-EC improved and the amount of scaffold residue decreased; more pronounced cartilage formation with fewer immune cells (CD3 and CD68 positive), apoptotic cells, and less collagen I expression were observed in explants that had been in vitro precultivated for a longer period. The subcutaneously regenerated neocartilage became more mature after prolonged implantation. These results suggested that prolonged in vitro precultivation allowed formation of a mature cartilaginous graft to resist the acute host response and promoted stable subcutaneous cartilage formation in autologous goats. These findings may provide useful reference for engineering auricle, trachea, nose, and eyelid shaped cartilage, for example.

Cartilage Repair in the Inflamed Joint: Considerations for Biological Augmentation Toward Tissue Regeneration

Cartilage repair/regeneration procedures (e.g., microfracture, autologous chondrocyte implantation [ACI]) typically result in a satisfactory outcome in selected patients. However, the vast majority of patients with chronic symptoms and, in general, a more diseased joint, do not benefit from these surgical techniques. The aims of this work were to (1) review factors negatively influencing the joint environment; (2) review current adjuvant therapies that can be used to improve results of cartilage repair/regeneration procedures in patients with more diseased joints, (3) outline future lines of research and promising experimental approaches. Chronicity of symptoms and advancing patient age appear to be the most relevant factors negatively affecting clinical outcome of cartilage repair/regeneration. Preliminary experience with hyaluronic acid, platelet-rich plasma, and mesenchymal stem cell has been positive but there is no strong evidence supporting the use of these products and this requires further assessment with high-quality, prospective clinical trials. The use of a Tissue Therapy strategy, based on more mature engineered tissues, holds promise to tackle limitations of standard ACI procedures. Current research has highlighted the need for more targeted therapies, and (1) induction of tolerance with granulocyte colony-stimulating factor (G-CSF) or by preventing IL-6 downregulation; (2) combined IL-4 and IL-10 local release; and (3) selective activation of the prostaglandin E2 (PGE2) signaling appear to be the most promising innovative strategies. For older patients and for those with chronic symptoms, adjuvant therapies are needed in combination with microfracture and ACI.

Ear-Shaped Stable Auricular Cartilage Engineered from Extensively Expanded Chondrocytes in an Immunocompetent Experimental Animal Model

Advancement of engineered ear in clinical practice is limited by several challenges. The complex, largely unsupported, three-dimensional auricular neocartilage structure is difficult to maintain. Neocartilage formation is challenging in an immunocompetent host due to active inflammatory and immunological responses. The large number of autologous chondrogenic cells required for engineering an adult human-sized ear presents an additional challenge because primary chondrocytes rapidly dedifferentiate during in vitro culture. The objective of this study was to engineer a stable, human ear-shaped cartilage in an immunocompetent animal model using expanded chondrocytes. The impact of basic fibroblast growth factor (bFGF) supplementation on achieving clinically relevant expansion of primary sheep chondrocytes by in vitro culture was determined. Chondrocytes expanded in standard medium were either combined with cryopreserved, primary passage 0 chondrocytes at the time of scaffold seeding or used alone as control. Disk and human ear-shaped scaffolds were made from porous collagen; ear scaffolds had an embedded, supporting titanium wire framework. Autologous chondrocyte-seeded scaffolds were implanted subcutaneously in sheep after 2 weeks of in vitro incubation. The quality of the resulting neocartilage and its stability and retention of the original ear size and shape were evaluated at 6, 12, and 20 weeks postimplantation. Neocartilage produced from chondrocytes that were expanded in the presence of bFGF was superior, and its quality improved with increased implantation time. In addition to characteristic morphological cartilage features, its glycosaminoglycan content was high and marked elastin fiber formation was present. The overall shape of engineered ears was preserved at 20 weeks postimplantation, and the dimensional changes did not exceed 10%. The wire frame within the engineered ear was able to withstand mechanical forces during wound healing and neocartilage maturation and prevented shrinkage and distortion. This is the first demonstration of a stable, ear-shaped elastic cartilage engineered from auricular chondrocytes that underwent clinical-scale expansion in an immunocompetent animal over an extended period of time.

Tissue engineered scaffolds for an effective healing and regeneration: reviewing orthotopic studies

It is commonly stated that tissue engineering is the most promising approach to treat or replace failing tissues/organs. For this aim, a specific strategy should be planned including proper selection of biomaterials, fabrication techniques, cell lines, and signaling cues. A great effort has been pursued to develop suitable scaffolds for the restoration of a variety of tissues and a huge number of protocols ranging from in vitro to in vivo studies, the latter further differentiating into several procedures depending on the type of implantation (i.e., subcutaneous or orthotopic) and the model adopted (i.e., animal or human), have been developed. All together, the published reports demonstrate that the proposed tissue engineering approaches spread toward multiple directions. The critical review of this scenario might suggest, at the same time, that a limited number of studies gave a real improvement to the field, especially referring to in vivo investigations. In this regard, the present paper aims to review the results of in vivo tissue engineering experimentations, focusing on the role of the scaffold and its specificity with respect to the tissue to be regenerated, in order to verify whether an extracellular matrix-like device, as usually stated, could promote an expected positive outcome.

Tissue-engineered tracheal reconstruction using three-dimensionally printed artificial tracheal graft: preliminary report

Three-dimensional printing has come into the spotlight in the realm of tissue engineering. We intended to evaluate the plausibility of 3D-printed (3DP) scaffold coated with mesenchymal stem cells (MSCs) seeded in fibrin for the repair of partial tracheal defects. MSCs from rabbit bone marrow were expanded and cultured. A half-pipe-shaped 3DP polycaprolactone scaffold was coated with the MSCs seeded in fibrin. The half-pipe tracheal graft was implanted on a 10 × 10-mm artificial tracheal defect in four rabbits. Four and eight weeks after the operation, the reconstructed sites were evaluated bronchoscopically, radiologically, histologically, and functionally. None of the four rabbits showed any sign of respiratory distress. Endoscopic examination and computed tomography showed successful reconstruction of trachea without any collapse or blockage. The replaced tracheas were completely covered with regenerated respiratory mucosa. Histologic analysis showed that the implanted 3DP tracheal grafts were successfully integrated with the adjacent trachea without disruption or granulation tissue formation. Neo-cartilage formation inside the implanted graft was sufficient to maintain the patency of the reconstructed trachea. Scanning electron microscope examination confirmed the regeneration of the cilia, and beating frequency of regenerated cilia was not different from those of the normal adjacent mucosa. The shape and function of reconstructed trachea using 3DP scaffold coated with MSCs seeded in fibrin were restored successfully without any graft rejection.

Successful creation of tissue-engineered autologous auricular cartilage in an immunocompetent large animal model

Tissue-engineered cartilage has historically been an attractive alternative treatment option for auricular reconstruction. However, the ability to reliably generate autologous auricular neocartilage in an immunocompetent preclinical model should first be established. The objectives of this study were to demonstrate engineered autologous auricular cartilage in the immunologically aggressive subcutaneous environment of an immunocompetent animal model, and to determine the impact of in vitro culture duration of chondrocyte-seeded constructs on the quality of neocartilage maturation in vivo. Auricular cartilage was harvested from eight adult sheep; chondrocytes were isolated, expanded in vitro, and seeded onto fibrous collagen scaffolds. Constructs were cultured in vitro for 2, 6, and 12 weeks, and then implanted autologously in sheep and in control nude mice for 6 and 12 weeks. Explanted tissue was stained with hematoxylin and eosin, safranin O, toluidine blue, collagen type II, and elastin. DNA and glycosaminoglycans (GAGs) were quantified. The quality of cartilage engineered in sheep decreased with prolonged in vitro culture time. Superior cartilage formation was demonstrated after 2 weeks of in vitro culture; the neocartilage quality improved with increased implantation time. In nude mice, neocartilage resembled native sheep auricular cartilage regardless of the in vitro culture length, with the exception of elastin expression. The DNA quantification was similar in all engineered and native cartilage (p>0.1). All cartilage engineered in sheep had significantly less GAG than native cartilage (p<0.02); significantly more GAG was observed with increased implantation time (p<0.02). In mice, the GAG content was similar to that of native cartilage and became significantly higher with increased in vitro or in vivo durations (p<0.02). Autologous auricular cartilage was successfully engineered in the subcutaneous environment of an ovine model using expanded chondrocytes seeded on a fibrous collagen scaffold after a 2-week in vitro culture period.

Are synthetic scaffolds suitable for the development of clinical tissue-engineered tubular organs?

Transplantation of tissues and organs is currently the only available treatment for patients with end-stage diseases. However, its feasibility is limited by the chronic shortage of suitable donors, the need for life-long immunosuppression, and by socioeconomical and religious concerns. Recently, tissue engineering has garnered interest as a means to generate cell-seeded three-dimensional scaffolds that could replace diseased organs without requiring immunosuppression. Using a regenerative approach, scaffolds made by synthetic, nonimmunogenic, and biocompatible materials have been developed and successfully clinically implanted. This strategy, based on a viable and ready-to-use bioengineered scaffold, able to promote novel tissue formation, favoring cell adhesion and proliferation, could become a reliable alternative to allotransplatation in the next future. In this article, tissue-engineered synthetic substitutes for tubular organs (such as trachea, esophagus, bile ducts, and bowel) are reviewed, including a discussion on their morphological and functional properties.

Scaffold-based delivery of a clinically relevant anti-angiogenic drug promotes the formation of in vivo stable cartilage

Standard cartilage tissue engineering approaches, for example, matrix-induced autologous chondrocyte implantation (MACI), consist of the implantation of cell-based constructs whose survival and further development first depend on the degree of graft maturity at the time of surgery (e.g., matrix production) and, subsequently, on initial host reaction. Indeed, blood vessel ingrowth and macrophage migration within the implant may endanger graft stability of immature constructs; so, control of angiogenesis was proposed as an adjuvant of cellular therapy for the treatment of cartilage defects. In this study, we hypothesized that engineered constructs with no in vitro precultivation, but functionalized to block angiogenesis right on implantation, might result in better survival, as well as superior long-term cartilaginous quality. Here, we propose a clinically compatible fibrin/hyaluronan scaffold seeded with nasal chondrocytes (NC) and functionalized with an FDA-approved anti-angiogenic drug (bevacizumab; Avastin(®)), which sequestrates vascular endothelial growth factor from the surrounding environment. Our results show that the sustained bevacizumab release from NC-loaded scaffolds after subcutaneous implantation in nude mice efficiently blocked host vessels ingrowth (five times lower CD31(+) cells infiltration vs. control group, at 3 weeks after implant), and enhanced constructs survival rate (75% vs. 18% for the control, at 6 weeks after implant). In vitro assays, developed to elucidate the role of specific construct components in the in vivo remodeling, allowed to determine that fibrin degradation products enhanced the in vitro endothelial cell proliferation, as well as the macrophage migration; whereas the presence of bevacizumab was capable of counteracting these effects. The proposed pharmacological control of angiogenesis by a therapeutic drug released from a scaffold might enhance cartilage regeneration by MACI approaches, possibly allowing it to bypass the complex and costly phase of graft preculture to gain increased functionality.

Long-term functional reconstruction of segmental tracheal defect by pedicled tissue-engineered trachea in rabbits

Due to lack of satisfactory tracheal substitutes, reconstruction of long segmental tracheal defects (>6 cm) is always a major challenge in trachea surgery. Tissue-engineered trachea (TET) provides a promising approach to address this challenge, but no breakthrough has been achieved yet in repairing segmental tracheal defect. The longest survival time only reached 60 days. The leading reasons for the failure of segmental tracheal defect reconstruction were mainly related to airway stenosis (caused by the overgrowth of granulation tissue), airway collapse (caused by cartilage softening) and mucous impaction (mainly caused by lack of epithelium). To address these problems, the current study proposed an improved strategy, which involved in vitro pre-culture, in vivo maturation, and pre-vascularization of TET grafts as well as the use of silicone stent. The results demonstrated that the two-step strategy of in vitro pre-culture plus in vivo implantation could successfully regenerate tubular cartilage with a mechanical strength similar to native trachea in immunocompetent animals. The use of silicone stents effectively depressed granulation overgrowth, prevented airway stenosis, and thus dramatically enhanced the survival rate at the early stage post-operation. Most importantly, through intramuscular implantation and transplantation with pedicled muscular flap, the TET grafts established stable blood supply, which guaranteed maintenance of tubular cartilage structure and function, accelerated epithelialization of TET grafts, and thus realized long-term functional reconstruction of segmental tracheal defects. The integration of all these improved strategies finally realized long-term survival of animals: 60% of rabbits survived over 6 months. The current improved strategy provided a promising approach for long-term functional reconstruction of long segmental tracheal defect.

Perichondrium directed cartilage formation in silk fibroin and chitosan blend scaffolds for tracheal transplantation

The purpose of this study was to investigate the potential of silk fibroin and chitosan blend (SFCS) biological scaffolds for the purpose of cartilage tissue engineering with applications in tracheal tissue reconstruction. The capability of these scaffolds as cell carrier systems for chondrocytes was determined in vitro and cartilage generation in vivo on engineered chondrocyte-scaffold constructs with and without a perichondrium wrapping was tested in an in vivo nude mouse model. SFCS scaffolds supported chondrocyte adhesion, proliferation, and differentiation, determined as features of the cells based on the spherical cell morphology, increased accumulation of glycosaminoglycans, and increased collagen type II deposition with time within the scaffold framework. Perichondrium wrapping significantly (P<0.001) improved chondrogenesis within the cell-scaffold constructs in vivo. In vivo implantation for 6weeks did not generate cartilage structures resembling native trachea, although cartilage-like structures were present. The mechanical properties of the regenerated tissue increased due to the deposition of chondrogenic matrix within the SFCS scaffold structural framework of the trachea. The support of chondrogenesis by the SFCS tubular scaffold construct resulted in a mechanically sound structure and thus is a step towards an engineered trachea that could potentially support the growth of an epithelial lining resulting in a tracheal transplant with properties resembling those of the fully functional native trachea.

Tissue engineering of cartilage, tendon and bone

Tissue engineering aims to produce a functional tissue replacement to repair defects. Tissue reconstruction is an essential step toward the clinical application of engineered tissues. Significant progress has recently been achieved in this field. In our laboratory, we focus on construction of cartilage, tendon and bone. The purpose of this review was to summarize the advances in the engineering of these three tissues, particularly focusing on tissue regeneration and defect repair in our laboratory. In cartilage engineering, articular cartilage was reconstructed and defects were repaired in animal models. More sophisticated tissues, such as cartilage in the ear and trachea, were reconstructed both in vitro and in vivo with specific shapes and sizes. Engineered tendon was generated in vitro and in vivo in many animal models with tenocytes or dermal fibroblasts in combination with appropriate mechanical loading. Cranial and limb bone defects were also successfully regenerated and repaired in large animals. Based on sophisticated animal studies, several clinical trials of engineered bone have been launched with promising preliminary results, displaying the high potential for clinical application.