A systematic review of antibiotics and antibiotic resistance genes (ARGs) in mariculture wastewater: Antibiotics removal by microalgal-bacterial symbiotic system (MBSS), ARGs characterization on the metagenomic

Antibiotic residues in mariculture wastewater seriously affect the aquatic environment. Antibiotic Resistance Genes (ARGs) produced under antibiotic stress flow through the environment and eventually enter the human body, seriously affecting human health. Microalgal-bacterial symbiotic system (MBSS) can remove antibiotics from mariculture and reduce the flow of ARGs into the environment. This review encapsulates the present scenario of mariculture wastewater, the removal mechanism of MBSS for antibiotics, and the biomolecular information under metagenomic assay. When confronted with antibiotics, there was a notable augmentation in the extracellular polymeric substances (EPS) content within MBSS, along with a concurrent elevation in the proportion of protein (PN) constituents within the EPS, which limits the entry of antibiotics into the cellular interior. Quorum sensing stimulates the microorganisms to produce biological responses (DNA synthesis - for adhesion) through signaling. Oxidative stress promotes gene expression (coupling, conjugation) to enhance horizontal gene transfer (HGT) in MBSS. The microbial community under metagenomic detection is dominated by aerobic bacteria in the bacterial-microalgal system. Compared to aerobic bacteria, anaerobic bacteria had the significant advantage of decreasing the distribution of ARGs. Overall, MBSS exhibits remarkable efficacy in mitigating the challenges posed by antibiotics and resistant genes from mariculture wastewater.

Advances in microalgae-based carbon sequestration: Current status and future perspectives

The advancement in carbon dioxide (CO2) sequestration technology has received significant attention due to the adverse effects of CO2 on climate. The mitigation of the adverse effects of CO2 can be accomplished through its conversion into useful products or renewable fuels. In this regard, microalgae is a promising candidate due to its high photosynthesis efficiency, sustainability, and eco-friendly nature. Microalgae utilizes CO2 in the process of photosynthesis and generates biomass that can be utilized to produce various valuable products such as supplements, chemicals, cosmetics, biofuels, and other value-added products. However, at present microalgae cultivation is still restricted to producing value-added products due to high cultivation costs and lower CO2 sequestration efficiency of algal strains. Therefore, it is very crucial to develop novel techniques that can be cost-effective and enhance microalgal carbon sequestration efficiency. The main aim of the present manuscript is to explain how to optimize microalgal CO2 sequestration, integrate valuable product generation, and explore novel techniques like genetic manipulations, phytohormones, quantum dots, and AI tools to enhance the efficiency of CO2 sequestration. Additionally, this review provides an overview of the mass flow of different microalgae and their biorefinery, life cycle assessment (LCA) for achieving net-zero CO2 emissions, and the advantages, challenges, and future perspectives of current technologies. All of the reviewed approaches efficiently enhance microalgal CO2 sequestration and integrate value-added compound production, creating a green and economically profitable process.

Potential of hospital wastewater treatment using locally isolated Chlorella sp. LH2 from cocoon wastewater

Chlorella sp. is able to grow and transform inorganic and organic contaminants in wastewater to create biomass. In the present study, Chlorella sp. LH2 isolated from cocoon wastewater was able to thrive in hospital wastewater, then remove nutrients and eliminate E. coli ATCC 8739. The results indicated that optimal cultivation conditions of Chlorella sp. LH2 in hospital wastewater were pH of 8, light:dark cycle of 16:8 at 30oC. The inhibitory effect of chlorination on algae growth was accompanied with the chlorine concentration. BOD5:COD ratio of 0.77 indicated biodegradability of hospital wastewater. The untreated and treated wastewatee samples were collected to investigated the nutrient removal efficiency after 10 days. Untreated and treated results were192 ± 8.62 mg/l 23.91 ± 2.19 mg/l for BOD5; 245 ± 9.15 mg/l and 47.31 ± 5.71 mg/l for COD. The treated value met the required standards for hospital wastewater treatment. The removal efficiency total nitrogen and total phosphorus were 68.64% and 64.44% after 10 days, respectively. Elimination of E. coli ATCC 8739 after 7 days by Chlorella sp. LH2 was 88.92%. The results of this study suggest the nutrients and pathogens removal potential of Chlorella sp. LH2 in hospital wastewater for further practical applications.

Carbon neutrality in wastewater treatment plants: An integrated biotechnological-based solution for nutrients recovery, odour abatement and CO2 conversion in alternative energy drivers

Wastewater treatment plants play a crucial role in water security and sanitation, ensuring ecosystems balance and avoiding significant negative effects on humans and environment. However, they determine also negative pressures, including greenhouse gas and odourous emissions, which should be minimized to mitigate climate changes besides avoiding complaints. The research has been focused on the validation of an innovative integrated biological system for the sustainable treatment of complex gaseous emissions from wastewater treatment plants. The proposed system consists of a moving bed biofilm reactor coupled with an algal photobioreactor, with the dual objective of: i) reducing the inlet concentration of the odourous contaminants (in this case, hydrogen sulphide, toluene and p-xylene); ii) capturing and converting the carbon dioxide emissions produced by the degradation process into exploitable algal biomass. The first reactor promoted the degradation of chemical compounds up to 99.57% for an inlet load (IL) of 22.97 g m-3 d-1 while the second allowed the capture of the CO2 resulting from the degradation of gaseous compounds, with biofixation rate up to 81.55%. The absorbed CO2 was converted in valuable feedstocks, with a maximum algal biomass productivity in aPBR of 0.22 g L-1 d-1. Dairy wastewater has been used as alternative nutrient source for both reactors, with a view of reusing wastewater while cultivating biomass, framing the proposed technology in a context of a biorefinery within a circular economy perspective. The biomass produced in the algal photobioreactor was indeed characterized by a high lipid content, with a maximum percentage of lipids per dry weight biomass of 35%. The biomass can therefore be exploited for the production of alternative and clean energy carrier. The proposed biotechnology represents an effective tool for shifiting the conventional plants in carbon neutral platform for implementing principles of ecological transition while achieving high levels of environmental protection.

Cattle wastewater treatment using green microalga Coelastrella sp. KNUA068 as a promising bioenergy feedstock with enhanced biodiesel quality

Global water scarcity increased the demand for clean water, leading to attention on microalgae-based biological treatment for wastewater due to economic feasibility and sustainable biomass applications. This study isolated indigenous microalga Coelastrella sp. KNUA068 from a wastewater treatment plant, observed its admissible growth rate in diluted cattle wastewater (DCW), and used it for wastewater treatment analysis. The microalga showed high growth rates in indoor and outdoor cultivation with 100% DCW. In addition, the ammonia nitrogen and nitrate nitrogen removal rates of the microalga were 69.97 and 60.35%, respectively, in indoor cultivation, and 50.63 and 67.20%, respectively, in outdoor cultivation. Carotenoid content analysis revealed lutein as the highest productivity carotenoid, and zeaxanthin production was higher in outdoor cultivation. The biomass exhibited suitable biodiesel quality with a cetane number of 50.8 for high-quality biodiesel production. Coelastrella sp. KNUA068 demonstrates potential for bioenergy feedstock, carotenoid production, and wastewater treatment.

Mechanism of enhanced microalgal biomass and lipid accumulation through symbiosis between a highly succinic acid-producing strain of Escherichia coli SUC and Aurantiochytrium sp. SW1

Microalgae, known for rapid growth and lipid richness, hold potential in biofuels and high-value biomolecules. The symbiotic link with bacteria is crucial in large-scale open cultures. This study explores algal-bacterial interactions using a symbiotic model, evaluating acid-resistant Lactic acid bacteria (LAB), stress-resilient Bacillus subtilis and Bacillus licheniformis, and various Escherichia coli strains in the Aurantiochytrium sp. SW1 system. It was observed that E. coli SUC significantly enhanced the growth and lipid production of Aurantiochytrium sp. SW1 by increasing enzyme activity (NAD-IDH, NAD-ME, G6PDH) while maintaining sustained succinic acid release. Optimal co-culture conditions included temperature 28 °C, a 1:10 algae-to-bacteria ratio, and pH 8. Under these conditions, Aurantiochytrium sp. SW1 biomass increased 3.17-fold to 27.83 g/L, and total lipid content increased 2.63-fold to 4.87 g/L. These findings have implications for more efficient microalgal lipid production and large-scale cultivation.

Perspectives for Using CO2 as a Feedstock for Biomanufacturing of Fuels and Chemicals

Microbial cell factories offer an eco-friendly alternative for transforming raw materials into commercially valuable products because of their reduced carbon impact compared to conventional industrial procedures. These systems often depend on lignocellulosic feedstocks, mainly pentose and hexose sugars. One major hurdle when utilizing these sugars, especially glucose, is balancing carbon allocation to satisfy energy, cofactor, and other essential component needs for cellular proliferation while maintaining a robust yield. Nearly half or more of this carbon is inevitably lost as CO2 during the biosynthesis of regular metabolic necessities. This loss lowers the production yield and compromises the benefit of reducing greenhouse gas emissions-a fundamental advantage of biomanufacturing. This review paper posits the perspectives of using CO2 from the atmosphere, industrial wastes, or the exhausted gases generated in microbial fermentation as a feedstock for biomanufacturing. Achieving the carbon-neutral or -negative goals is addressed under two main strategies. The one-step strategy uses novel metabolic pathway design and engineering approaches to directly fix the CO2 toward the synthesis of the desired products. Due to the limitation of the yield and efficiency in one-step fixation, the two-step strategy aims to integrate firstly the electrochemical conversion of the exhausted CO2 into C1/C2 products such as formate, methanol, acetate, and ethanol, and a second fermentation process to utilize the CO2-derived C1/C2 chemicals or co-utilize C5/C6 sugars and C1/C2 chemicals for product formation. The potential and challenges of using CO2 as a feedstock for future biomanufacturing of fuels and chemicals are also discussed.

Realization process of microalgal biorefinery: The optional approach toward carbon net-zero emission

Increasing carbon dioxide (CO2) emission has already become a dire threat to the human race and Earth's ecology. Microalgae are recommended to be engineered as CO2 fixers in biorefinery, which play crucial roles in responding climate change and accelerating the transition to a sustainable future. This review sorted through each segment of microalgal biorefinery to explore the potential for its practical implementation and commercialization, offering valuable insights into research trends and identifies challenges that needed to be addressed in the development process. Firstly, the known mechanisms of microalgal photosynthetic CO2 fixation and the approaches for strain improvement were summarized. The significance of process regulation for strengthening fixation efficiency and augmenting competitiveness was emphasized, with a specific focus on CO2 and light optimization strategies. Thereafter, the massive potential of microalgal refineries for various bioresource production was discussed in detail, and the integration with contaminant reclamation was mentioned for economic and ecological benefits. Subsequently, economic and environmental impacts of microalgal biorefinery were evaluated via life cycle assessment (LCA) and techno-economic analysis (TEA) to lit up commercial feasibility. Finally, the current obstacles and future perspectives were discussed objectively to offer an impartial reference for future researchers and investors.

Milligrams to kilograms: making microbes work at scale

If biomanufacturing can become a sustainable route for producing chemicals, it will provide a critical step in reducing greenhouse gas emissions to fight climate change. However, efforts to industrialize microbial synthesis of chemicals have met with varied success, due, in part, to challenges in translating laboratory successes to industrial scale. With a particular focus on Escherichia coli, this review examines the lessons learned when studying microbial physiology and metabolism under conditions that simulate large-scale bioreactors and methods to minimize cellular waste through reduction of maintenance energy, optimizing the stress response and minimizing culture heterogeneity. With general strategies to overcome these challenges, biomanufacturing process scale-up could be de-risked and the time and cost of bringing promising syntheses to market could be reduced.

Mixotrophy, a more promising culture mode: Multi-faceted elaboration of carbon and energy metabolism mechanisms to optimize microalgae culture

Some mixotrophic microalgae appear to exceed the sum of photoautotrophy and heterotrophy in terms of biomass production. This paper mainly reviews the carbon and energy metabolism of microalgae to reveal the synergistic mechanisms of the mixotrophic mode from multiple aspects. It explains the shortcomings of photoautotrophic and heterotrophic growth, highlighting that the mixotrophic mode is not simply the sum of photoautotrophy and heterotrophy. Specifically, microalgae in mixotrophic mode can be divided into separate parts of photoautotrophic and heterotrophic cultures, and the synergistic parts of photoautotrophic culture enhance aerobic respiration and heterotrophic culture enhance the Calvin cycle. Additionally, this review argues that current deficiencies in mixotrophic culture can be improved by uncovering the synergistic mechanism of the mixotrophic mode, aiming to increase biomass growth and improve quality. This approach will enable the full utilization of advantagesin various fields, and provide research directions for future microalgal culture.

Acclimation-driven microalgal cultivation improved temperature and light stress tolerance, CO2 sequestration and metabolite regulation for bioenergy production

This study investigates temperature and light impact on the ability of Micractinium pusillum microalgae to mitigate CO2 and produce bioenergy in semi-continuous mode. Microalgae were exposed to temperatures (15, 25, and 35 °C) and light intensities (50, 350, and 650 μmol m-2 s-1), including two temperature cycles, 25 °C had the maximum growth rate, with no significant difference at 35 °C and light intensities of 350 and 650 μmol m-2 s-1. 15 °C temperature and 50 μmol m-2 s-1 light intensity reduced growth. Increased light intensity accelerated growth, CO2 utilization with carbon and bioenergy accumulation. Microalgae demonstrate rapid primary metabolic adjustment and acclimation reactions in response to changes in light and temperature conditions. Temperature correlated positively with carbon and nitrogen fixation, CO2 fixation, and carbon accumulation in the biomass, whereas there was no correlation found between light. In the temperature regime experiment, higher light intensity boosted nutrient and CO2 utilization, carbon buildup, and biomass bioenergy.

Transcriptional insights into Chlorella sp. ABC-001: a comparative study of carbon fixation and lipid synthesis under different CO2 conditions

BACKGROUND

Microalgae's low tolerance to high CO2 concentrations presents a significant challenge for its industrial application, especially when considering the utilization of industrial exhaust gas streams with high CO2 content-an economically and environmentally attractive option. Therefore, the objectives of this study were to investigate the metabolic changes in carbon fixation and lipid accumulation of microalgae under ambient air and high CO2 conditions, deepen our understanding of the molecular mechanisms driving these processes, and identify potential target genes for metabolic engineering in microalgae. To accomplish these goals, we conducted a transcriptomic analysis of the high CO2-tolerant strain, Chlorella sp. ABC-001, under two different carbon dioxide levels (ambient air and 10% CO2) and at various growth phases.

RESULTS

Cells cultivated with 10% CO2 exhibited significantly better growth and lipid accumulation rates, achieving up to 2.5-fold higher cell density and twice the lipid content by day 7. To understand the relationship between CO2 concentrations and phenotypes, transcriptomic analysis was conducted across different CO2 conditions and growth phases. According to the analysis of differentially expressed genes and gene ontology, Chlorella sp. ABC-001 exhibited the development of chloroplast organelles during the early exponential phase under high CO2 conditions, resulting in improved CO2 fixation and enhanced photosynthesis. Cobalamin-independent methionine synthase expression was also significantly elevated during the early growth stage, likely contributing to the methionine supply required for various metabolic activities and active proliferation. Conversely, the cells showed sustained repression of carbonic anhydrase and ferredoxin hydrogenase, involved in the carbon concentrating mechanism, throughout the cultivation period under high CO2 conditions. This study also delved into the transcriptomic profiles in the Calvin cycle, nitrogen reductase, and lipid synthesis. Particularly, Chlorella sp. ABC-001 showed high expression levels of genes involved in lipid synthesis, such as glycerol-3-phosphate dehydrogenase and phospholipid-diacylglycerol acyltransferase. These findings suggest potential targets for metabolic engineering aimed at enhancing lipid production in microalgae.

CONCLUSIONS

We expect that our findings will help understand the carbon concentrating mechanism, photosynthesis, nitrogen assimilation, and lipid accumulation metabolisms of green algae according to CO2 concentrations. This study also provides insights into systems metabolic engineering of microalgae for improved performance in the future.

A review on microalgal-bacterial co-culture: The multifaceted role of beneficial bacteria towards enhancement of microalgal metabolite production

Mass microalgal-bacterial co-cultures have come to the fore of applied physiological research, in particularly for the optimization of high-value metabolite from microalgae. These co-cultures rely on the existence of a phycosphere which harbors unique cross-kingdom associations that are a prerequisite for the cooperative interactions. However, detailed mechanisms underpinning the beneficial bacterial effects onto microalgal growth and metabolic production are rather limited at the moment. Hence, the main purpose of this review is to shed light on how bacteria fuels microalgal metabolism or vice versa during mutualistic interactions, building upon the phycosphere which is a hotspot for chemical exchange. Nutrients exchange and signal transduction between two not only increase the algal productivity, but also facilitate in the degradation of bio-products and elevate the host defense ability. Main chemical mediators such as photosynthetic oxygen, N-acyl-homoserine lactone, siderophore and vitamin B12 were identified to elucidate beneficial cascading effects from the bacteria towards microalgal metabolites. In terms of applications, the enhancement of soluble microalgal metabolites is often associated with bacteria-mediated cell autolysis while bacterial bio-flocculants can aid in microalgal biomass harvesting. In addition, this review goes in depth into the discussion on enzyme-based communication via metabolic engineering such as gene modification, cellular metabolic pathway fine-tuning, over expression of target enzymes, and diversion of flux toward key metabolites. Furthermore, possible challenges and recommendations aimed at stimulating microalgal metabolite production are outlined. As more evidence emerges regarding the multifaceted role of beneficial bacteria, it will be crucial to incorporate these findings into the development of algal biotechnology.

Production of sustainable biofuels from microalgae with CO2 bio-sequestration and life cycle assessment

Due to anthropogenic emissions, there is an increase in the concentration of carbon dioxide (CO₂) in the atmosphere. Microalgae are versatile, universal, and photosynthetic microorganisms present in nature. Biological CO₂ sequestration using microalgae is a novel concept in CO₂ mitigation strategies. In the current review, the difference between carbon capture and storage (CCS), carbon capture utilization and storage (CCUS), and carbon capture and utilization (CCU) is clarified. The current status of CO₂ sequestration techniques is discussed, including various methods and a comparative analysis of abiotic and biotic sequestration. Particular focus is given to sequestration methods associated with microalgae, including advantages of CO₂ bio-sequestration using microalgae, a summary of microalgae species that tolerate high CO₂ concentrations, biochemistry of microalgal CO₂ biofixation, and elements influencing the microalgal CO₂ sequestration. In addition, this review highlights and summarizes the research efforts made on the production of various biofuels using microalgae. Notably, Chlorella sp. is found to be the most beneficial microalgae, with a sizeable hydrogen (H₂) generation capability ranging from 6.1 to 31.2 mL H₂/g microalgae, as well as the species of C. salina, C. fusca, Parachlorella kessleri, C. homosphaera, C. vacuolate, C. pyrenoidosa, C. sorokiniana, C. lewinii, and C. protothecoides. Lastly, the technical feasibility and life cycle analysis are analyzed. This comprehensive review will pave the way for promoting more aggressive research on microalgae-based CO₂ sequestration.

Energy metabolism and intracellular pH regulation reveal different physiological acclimation mechanisms of Chlorella strains to high concentrations of CO2

The intolerance of high CO₂ in the exhaust gas is the "bottleneck" limiting the wide application of microalgae for CO₂ biosequestration. Around this topic, we selected high-CO₂-tolerant (LAMB 33 and 31) and nontolerant (LAMB 122) Chlorella strains to study their different energy metabolisms and cytoplasmic pH regulations in response to high CO₂. Under 40 % CO₂, LAMB 33 and 31 both showed elevated ATP synthesis, accelerated ATP consumption and fast cytoplasmic pH regulation while exhibiting different acclimating strategies therein: chloroplast acclimations were reflected by high chlorophyll contents in 33 but photosystem transitions in 31; faster mitochondrial acclimations occurred in 33 than in 31; cellular organic carbon mainly flowed to monosaccharide synthesis for 33 but to monosaccharide and protein synthesis for 31; and cytoplasmic pH regulation was attributed to V-ATPase in 31 but not in 33. All the above metabolic processes gradually collapsed in 122, leading to growth inhibition. Our study identified different metabolic acclimation strategies among Chlorella strains to high CO₂ and provided new traits for breeding microalgae for CO₂ biosequestration.

Removal of carbamazepine, venlafaxine and iohexol from wastewater effluent using coupled microalgal-bacterial biofilm

We evaluated the removal capacity of a coupled microalgal-bacterial biofilm (CMBB) to eliminate three recalcitrant pharmaceuticals. The CMBB's efficiency, operating at different biofilm concentrations, with or without light, was compared and analyzed to correlate these parameters to pharmaceutical removal and their effect on the microorganism community. Removal rates changed with changing pharmaceutical and biofilm concentrations: higher biofilm concentrations presented higher removal. Removal of 82-94% venlafaxine and 18-51% carbamazepine was obtained with 5 days of CMBB treatment. No iohexol removal was observed. Light, microorganism composition, and dissolved oxygen concentration are essential parameters governing the removal of pharmaceuticals and ammonia. Chlorophyll concentration increased with time, even in the dark. Three bacterial phyla were dominant: Proteobacteria, Bacteroidetes and Firmicutes. The dominant eukaryotic supergroups were Archaeplastida, Excavata and SAR. A study of the microorganisms' community indicated that not only do the species in the biofilm play an important role; environment, concentration and interactions among them are also important. CMBB has the potential to provide low-cost and sustainable treatment for wastewater and recalcitrant pharmaceutical removal. The microenvironments on the biofilm created by the microalgae and bacteria improved treatment efficiency.

Influence of C/N ratios on treatment performance and biomass production during co-culture of microalgae and activated sludge

Novel phycosphere associated bacteria processes are being regarded as a potential and cost-effective strategy for controlling anthropogenic contaminants in wastewater treatment. However, the underlying concern with the process is its vulnerability to improper organic or nutrient intake. This study established a synergistic interaction between microalgae and activated sludge in a three-photobioreactor system (without external aeration) to understand how pollutants could be mitigated whilst simultaneously yielding biomass under different C/N ratios of 1:1, 5:1 and 10:1. The result showed that the superior biomass productivity was facilitated at a C/N ratio of 5:1 (106 mg L^-1 d^-1), and the high degradation rate constants (k_COD = 0.25 d^-1, k_TN = 0.29 d^-1, k_TP = 0.35 d^-1) was approximated using a first-order kinetic model. The removal of pollutants was remarkably high, exceeding 90% (COD), 93% (TN), and 96% (TP). Nevertheless, the C/N ratio of 1:1 resulted in a threefold drop in biomass-specific growth rate (μ = 0.07 d^-1). Microalgal assimilation, followed by bacterial denitrification, is the major pathway of removing total nitrogen when the C/N ratio exceeds 5:1. Activated sludge plays an important role in improving microalgae tolerance to high concentration of ammonia nitrogen and boosting nitrification (light phase) and denitrification (dark phase). The use of phycosphere associated bacteria could be a promising strategy for controlling nutrients pollution and other environmental considerations in wastewater.

Bioenergy, Biofuels, Lipids and Pigments—Research Trends in the Use of Microalgae Grown in Photobioreactors

This scientometric review and bibliometric analysis aimed to characterize trends in scientific research related to algae, photobioreactors and astaxanthin. Scientific articles published between 1995 and 2020 in the Web of Science and Scopus bibliographic databases were analyzed. The article presents the number of scientific articles in particular years and according to the publication type (e.g., articles, reviews and books). The most productive authors were selected in terms of the number of publications, the number of citations, the impact factor, affiliated research units and individual countries. Based on the number of keyword occurrences and a content analysis of 367 publications, seven leading areas of scientific interest (clusters) were identified: (1) techno-economic profitability of biofuels, bioenergy and pigment production in microalgae biorefineries, (2) the impact of the construction of photobioreactors and process parameters on the efficiency of microalgae cultivation, (3) strategies for increasing the amount of obtained lipids and obtaining biodiesel in Chlorella microalgae cultivation, (4) the production of astaxanthin on an industrial scale using Haematococcus microalgae, (5) the productivity of biomass and the use of alternative carbon sources in microalgae culture, (6) the effect of light and carbon dioxide conversion on biomass yield and (7) heterotrophy. Analysis revealed that topics closely related to bioenergy production and biofuels played a dominant role in scientific research. This publication indicates the directions and topics for future scientific research that should be carried out to successfully implement economically viable technology based on microalgae on an industrial scale.

A parametric logistic equation with light flux and medium concentration for cultivation planning of microalgae

Microalgae are considered to be promising producers of bioactive chemicals, feeds and fuels from carbon dioxide by photosynthesis. Thus, the prediction of microalgal growth profiles is important for the planning of cost-effective and sustainable cultivation–harvest cycles. This paper proposes a mathematical model capable of predicting the effect of light flux into culture and medium concentration on the growth profiles of microalgae by incorporating these growth-limiting factors into a logistic equation. The specific form of the equation is derived based on the experimentally measured growth profiles of Monoraphidium sp., a microalgal strain isolated by the authors, under 16 conditions consisting of combinations of incident light fluxes into culture and initial medium concentrations. Using a cross-validation method, it is shown that the proposed model has the ability to predict necessary incident light flux into culture and initial medium concentration for harvesting target biomass at a target time. Finally, model-guided cultivation planning is performed and is evaluated by comparing the result with experimental data.

Determination of photoautotrophic growth and inhibition kinetics by the Monod and the Aiba models and bioenergetics of local microalgae strain

The usage of fossil fuels results in a high amount of greenhouse gas (GHG) emissions and renewable green energy requirements entail saving ecological balance. Therefore, microalgae cultivation is widespread as a suitable raw material to produce renewable and sustainable fuel. Mathematical models are useful tools for the estimation of different conditions of a system. In this study, mathematical models were developed for monitoring the cultivation of local species of microalgae based on the chlorophyll-a and biomass concentration. Coefficients that were calculated from the Monod kinetic model were μmax; 0.03 day^-1, K_S, C_i; 0.53 mM with an R² value of 0.93 and from the Aiba inhibition kinetic model was μmax and K_S, C_i 1.48 day^-1 and 0.08 mM with an R² value of 0,73. According to the literature, there was no model was developed for the determination of kinetic coefficients based on chlorophyll-a production due to the inorganic carbon consumption. While both growth and inhibition models were developed for the inorganic carbon consumption, chlorophyll-a concentration was used for the growth model and biomass concentration was used for the inhibition model which caused and directly affected by the decrease of light penetration. The maximum biomass and chlorophyll-a concentrations were found as 1.2 g/L and 27.8 mg/L respectively with 10.24 mg/L. day^-1 nitrogen and 1.19 mg/L.day^-1 phosphorus uptake rate.

Enhancement of protein production using synthetic brewery wastewater by Haematococcus pluvialis

Microalgae is a sustainable protein source that has been widely applied in animal feeds, functional foods, pharmaceutical, and cosmeceutical industries. Waste products could be a potential cost-saving and nutrient-rich substrate in the cultivation of microalgae for protein production. This study aims to investigate the cultivation condition of Haematococcus pluvialis for protein synthesis using synthetic brewery wastewater (BW). H. pluvialis was cultivated in the Bold's Basal Medium (BBM) mixed with synthetic BW at different concentrations. Various cultivation conditions including brewer's spent grain hydrolysate (BSGH) concentrations, pH, and light sources were studied. The molecular weight, amino acids profile and antioxidant activity of synthesized protein were determined. Fed-batch cultivation using different percentages of fresh medium replacement for enhancing protein production was investigated. The 20% fed-batch cultivation reached 27 ×10⁵ ± 0.42 cells/mL, and 4-fold of the protein content of 64.93 ± 5.30% of dry weight was recorded on day-13. Seven essential amino acids (lysine, threonine, histidine, phenylalanine, isoleucine, leucine, methionine) were produced in fed-batch cultivation. Red LED obtained the highest DPPH radical scavenging activity of 27.47 ± 0.98%. The findings suggested that BW is a promising substrate in the cultivation of H. pluvialis to commercially produce protein for numerous industrial applications.

Microalgae potential in the capture of CO2 emission

In a perspective projected to reduce the atmospheric concentration of greenhouse gases, in which carbon dioxide is the master, the use of microalgae is an effective and decisive response. The review describes the bio circularity of the process of abatement of carbon dioxide through biofixation in algal biomass, highlighting the potential of its reuse in the production of high value-added products.

Production, isolation and characterization of C-phycocyanin from a new halo-tolerant Cyanobacterium aponinum using seawater

A halo-tolerant Cyanobacterium aponinum PCC 10605 was applied for the first time to produce high-level C-phycocyanin (C-PC). Combined with chemical extraction with sodium phosphate buffer and physical treatment using high pressure homogenization, a higher titer of C-PC was achieved. The culture conditions were optimized by mixing nitrate and ammonia ions, 2% carbon dioxide, and conditional light intensity. Thus, strain PCC10605 produced the highest titer C-PC of 0.652 g/g-DCW in the N1A2 medium with 10% light intensity and 16:8 light-period on day 7. PCC10605 accumulated 0.51 g-CPC/g-DCW at 20 g/L NaCl, while it grew normally in seawater with 30 g/L salinity, thus confirmed that PCC10605 was halo-tolerant strain. Besides, PCC10605 survived in 0.12 g/L phosphate medium that has never been reported. Finally, the purified C-PC exhibited DPPH, superoxide scavenging activity and antibacterial activity, which displayed 87.6%, and 18.7% removal of free radical, and 1.98 cm of inhibition zone for Escherichia coli.

Effects of cultivation conditions on Chlorella vulgaris and Desmodesmus sp. grown in sugarcane agro-industry residues

Large-scale microalgae cultivation is often associated with high costs, and nutrients account for a significant part. However, the use of cheaper nutrients, carbon, and water sources could reduce expenses. This study aims to produce Chlorella vulgaris and Desmodesmus sp. cultivated in sugarcane biorefinery residues bagasse and vinasse. A biofertilizer from bagasse biochar was produced and characterized, and a pre-treatment by filtration was performed on vinasse. The effects of varying growth conditions (antibiotic, vinasse, and biofertilizer concentrations; air flowrate; pH; light intensity; and photoperiod) were discussed based on the results of a Plackett-Burman design. The highest cell density was achieved by Desmodesmus sp. (46·10⁶ cells mL^-1 from an initial 6.5·10⁶ cells mL^-1) using vinasse (20%) and biofertilizer (1 g L^-1). Specific metabolite accumulation was also observed. Under stress conditions, 21.3% lipids and 51.0% carbohydrates were obtained for two different cultivations. Using 1 g L^-1 of biofertilizer, biomass composition had 74.8% proteins.

Augmented CO2 tolerance by expressing a single H+-pump enables microalgal valorization of industrial flue gas

Microalgae can accumulate various carbon-neutral products, but their real-world applications are hindered by their CO2 susceptibility. Herein, the transcriptomic changes in a model microalga, Chlamydomonas reinhardtii, in a high-CO2 milieu (20%) are evaluated. The primary toxicity mechanism consists of aberrantly low expression of plasma membrane H+-ATPases (PMAs) accompanied by intracellular acidification. Our results demonstrate that the expression of a universally expressible PMA in wild-type strains makes them capable of not only thriving in acidity levels that they usually cannot survive but also exhibiting 3.2-fold increased photoautotrophic production against high CO2 via maintenance of a higher cytoplasmic pH. A proof-of-concept experiment involving cultivation with toxic flue gas (13 vol% CO2, 20 ppm NOX, and 32 ppm SOX) shows that the production of CO2-based bioproducts by the strain is doubled compared with that by the wild-type, implying that this strategy potentially enables the microalgal valorization of CO2 in industrial exhaust.

Enhanced biomass production through a repeated sequential auto-and heterotrophic culture mode in Chlorella protothecoides

A repeated sequential auto-and heterotrophic (RSAH) culture mode was designed to enhancebiomass ofChlorella protothecoides. Based on the result that the photosynthesis system may receive damage if the light period is more than 16 h, autotrophy was applied in the 16 h of the light cycle and mixotrophy using acetic acid and glucose in the 8 h of dark cycle. In the dark cycle, an organic carbon source was added according to the Monod equation to maintain activation of the TCA cycle and organic carbon source-to-cell conversion. When acetic acid and glucose were used as organic carbon sources, this culture method was found to be 32.3% and 12.6% higher in biomass, 2.59 and 2.67 times higher in the organic carbon source-to-cell conversion factor, and 2.17 and 2.32 times higher in ATP/ADP ratio, respectively, compared to mixotrophy. Through this new culture method, economic feasibility and carbon reduction capabilities in large-scale cultures can be achieved.

Supporting Simultaneous Air Revitalization and Thermal Control in a Crewed Habitat With Temperate Chlorella vulgaris and Eurythermic Antarctic Chlorophyta

Including a multifunctional, bioregenerative algal photobioreactor for simultaneous air revitalization and thermal control may aid in carbon loop closure for long-duration surface habitats. However, using water-based algal media as a cabin heat sink may expose the contained culture to a dynamic, low temperature environment. Including psychrotolerant microalgae, native to these temperature regimes, in the photobioreactor may contribute to system stability. This paper assesses the impact of a cycled temperature environment, reflective of spacecraft thermal loops, to the oxygen provision capability of temperate Chlorella vulgaris and eurythermic Antarctic Chlorophyta. The tested 28-min temperature cycles reflected the internal thermal control loops of the International Space Station (C. vulgaris, 9-27°C; Chlorophyta-Ant, 4-14°C) and included a constant temperature control (10°C). Both sample types of the cycled temperature condition concluded with increased oxygen production rates (C. vulgaris; initial: 0.013 mgO₂ L^-1, final: 3.15 mgO₂ L^-1 and Chlorophyta-Ant; initial: 0.653 mgO₂ L^-1, final: 1.03 mgO₂ L^-1) and culture growth, suggesting environmental acclimation. Antarctic sample conditions exhibited increases or sustainment of oxygen production rates normalized by biomass dry weight, while both C. vulgaris sample conditions decreased oxygen production per biomass. However, even with the temperature-induced reduction, cycled temperature C. vulgaris had a significantly higher normalized oxygen production rate than Antarctic Chlorophyta. Chlorophyll fluorometry measurements showed that the cycled temperature conditions did not overly stress both sample types (F_V/F_M: 0.6-0.75), but the Antarctic Chlorophyta sample had significantly higher fluorometry readings than its C. vulgaris counterpart (F = 6.26, P < 0.05). The steady state C. vulgaris condition had significantly lower fluorometry readings than all other conditions (F_V/F_M: 0.34), suggesting a stressed culture. This study compares the results to similar experiments conducted in steady state or diurnally cycled temperature conditions. Recommendations for surface system implementation are based off the presented results. The preliminary findings imply that both C. vulgaris and Antarctic Chlorophyta can withstand the dynamic temperature environment reflective of a thermal control loop and these data can be used for future design models.

Effects of stepwise changes in dissolved carbon dioxide concentrations on metabolic activity in Chlorella for spaceflight applications

This paper assesses the impacts to the growth rate, health, oxygen production, and carbon dioxide fixation and nitrogen assimilation of Chlorella vulgaris while sparging the culture with various influent concentrations of carbon dioxide. Selected concentrations reflect a cabin environment with one crew member (0.12% v/v) and four crew members (0.45% v/v). Stepwise, sustained changes in influent carbon dioxide concentration on day four of the eight-day experiments simulated a dynamic crew size, reflective of a planetary surface mission. Control experiments used constant influent concentrations across eight days. Significant changes in growth rate (0.12%-to-0.45%: 57% increase; 0.45%-to-0.12%: 59% reduction) suggest a positive correlation between metabolic activity of C. vulgaris and environmental carbon dioxide concentration. Statistical tests illustrate that algae are more sensitive to reductions in influent carbon dioxide. No specific correlation of the nitrogen assimilation rate to influent carbon dioxide, suggesting a nitrogen-limited or irradiance-limited system. Photosynthetic yield results (0.59-0.72) indicate that the culture was minimally stressed in all tested conditions. This paper compares these results to findings of published, steady-state experiments conducted under similar carbon dioxide environments. The findings presented here imply that a sufficient volume of C. vulgaris, with nutrient supplementation or biomass harvesting, could support the respiratory requirements of a long duration human mission with a dynamic cabin environment and these data can be used in future dynamic models.

Co-Cultivation of Leptolyngbya tenuis (Cyanobacteria) and Chlorella ellipsoidea (Green alga) for Biodiesel Production, Carbon Sequestration, and Cadmium Accumulation

The co-cultivation approach using cyanobacteria-Leptolyngbya tenuis and green alga-Chlorella ellipsoidea demonstrated in the present study showed additive and synergistic effects on biomass yield, biomass productivity, lipid yield, lipid productivity, CO₂ fixation, and cadmium bioremediation efficiency. The results of co-culture in batch mode revealed about 2-3 times increase in biomass and two times increase in total lipid, when compared to the pure culture batches. The results revealed that co-cultures exhibited significantly high CO₂ fixation rate of 2.63  ±  0.09 g/L/d, which is 1.5-2 times better than monocultures (P < 0.05). To explore the bioaccumulation of cadmium by co-cultures and pure cultures, different concentrations of cadmium nitrate was used in flask trials. Cadmium accumulation was observed in the order: co-culture (74%, 0.37 mg/L) > Chlorella (58%, 0.29 mg/L) > Leptolyngbya (50%, 0.25 mg/L) (P < 0.05). In addition, fatty acid composition, CHNS analysis, biodiesel characterization, and biochemical compositions were also determined using co-culture method. The maximum biomass yield, productivity, lipid content, and CO₂ fixation rate in cadmium induced co-culture were 3.95  ±  0.13 g/L, 258.88  ±  15.75 mg/L/d, 41.43  ±  0.71%, and 3.21  ±  0.20 g/L/d, respectively which is 1.2, 1.3, 2.3, and 1.2 times higher than the control (P < 0.05). Cadmium induced changes in growth and lipid yield using co-culture suggests cost-effective and eco-friendly production of biodiesel and carbon mitigation.

Co-culture of microalgae-activated sludge for wastewater treatment and biomass production: Exploring their role under different inoculation ratios

In this study, mixed culture (microalgae:activated sludge) of a photobioreactor (PBR) were investigated at different inoculation ratios (1:0, 9:1, 3:1, 1:1, 0:1 wt/wt). This work was not only to determine the optimal ratio for pollutant remediation and biomass production but also to explore the role of microorganisms in the co-culture system. The results showed high total biomass concentrations were obtained from 1:0 and 3:1 ratio being values of 1.06, 1.12 g L^-1, respectively. Microalgae played a dominant role in nitrogen removal via biological assimilation while activated sludge was responsible for improving COD removal. Compared with the single culture of microalgae, the symbiosis between microalgae and bacteria occurred at 3:1 and 1:1 ratio facilitated a higher COD removal by 37.5-45.7 %. In general, combined assessment based on treatment performance and biomass productivity facilitated to select an optimal ratio of 3:1 for the operation of the co-culture PBR.

Optimised spectral effects of programmable LED arrays (PLA)s on bioelectricity generation from algal-biophotovoltaic devices

The biophotovoltaic cell (BPV) is deemed to be a potent green energy device as it demonstrates the generation of renewable energy from microalgae; however, inadequate electron generation from microalgae is a significant impediment for functional employment of these cells. The photosynthetic process is not only affected by the temperature, CO₂ concentration and light intensity but also the spectrum of light. Thus, a detailed understanding of the influences of light spectrum is essential. Accordingly, we developed spectrally optimized light using programmable LED arrays (PLA)s to study the effect on algae growth and bioelectricity generation. Chlorella is a green microalga and contains chlorophyll-a (chl-a), which is the major light harvesting pigment that absorbs light in the blue and red spectrum. In this study, Chlorella is grown under a PLA which can optimally simulate the absorption spectrum of the pigments in Chlorella. This experiment investigated the growth, photosynthetic performance and bioelectricity generation of Chlorella when exposed to an optimally-tuned light spectrum. The algal BPV performed better under PLA with a peak power output of 0.581 mW m⁻² for immobilized BPV device on day 8, which is an increase of 188% compared to operation under a conventional white LED light source. The photosynthetic performance, as measured using pulse amplitude modulation (PAM) fluorometry, showed that the optimized spectrum from the PLA gave an increase of 72% in the rETRmax value (190.5 μmol electrons m⁻² s⁻¹), compared with the conventional white light source. Highest algal biomass (1100 mg L⁻¹) was achieved in the immobilized system on day eight, which translates to a carbon fixation of 550 mg carbon L⁻¹. When artificial light is used for the BPV system, it should be optimized with the light spectrum and intensity best suited to the absorption capability of the pigments in the cells. Optimum artificial light source with algal BPV device can be integrated into a power management system for low power application (eg. environment sensor for indoor agriculture system).

Biomitigation of CO2 from flue gas by Scenedesmus obtusiusculus AT-UAM using a hybrid photobioreactor coupled to a biomass recovery stage by electro-coagulation-flotation

The microalga Scenedesmus obtusiusculus AT-UAM efficiently captured CO₂ from two flue gas streams in a hybrid photobioreactor located in a greenhouse. Uptake rates of CO₂, NO, and SO₂ from a formulated gas stream were 160.7 mg L^-1 day^-1, 0.73 mg L^-1 day^-1, and 1.56 mg L^-1 day^-1, respectively, with removal efficiencies of 100% for all gases. Exhaust gases of a motor generator were also removed with uptake rates of 111.4 mg L^-1 day^-1, 0.42 mg L^-1 day^-1, and 0.98 mg L^-1 day^-1, obtaining removal efficiencies of 77%, 71%, and 53% for CO₂, NO_x, and SO₂, respectively. On average, 61% of the CO₂ from both flue gas streams was assimilated as microalgal biomass. The maximum CO₂ uptake rate of 182 mg L^-1 day^-1 was achieved for formulated flue gas flow rate above 100 mL min^-1. The biomass recovery of 88% was achieved using a 20-L electro-coagulation-flotation chamber coupled to a settler with a low specific power consumption of 0.27 kWh kg^-1. The photobioreactor was operated for almost 7 months without contamination of invasive species or a decrease in the activity. It is a very encouraging result for long-term operation in flue gas treatment.

Physical and biological fixation of CO2 with polymeric nanofibers in outdoor cultivations of Chlorella fusca LEB 111

The objective of this study was to cultivate Chlorella fusca LEB 111 with nanofibers indoors and outdoors to verify the effect on CO₂ biofixation and macromolecule production. The microalgae were cultured with 10% (w v^-1) polyacrylonitrile (PAN)/dimethylformamide (DMF) nanofibers containing 4% (w v^-1) iron oxide nanoparticles (NPsFe₂O₃), which were added to the cultivations at concentrations of 0, 0.1, 0.3 and 0.5 g L^-1. The CO₂ biofixation was higher in outdoor assays (270.6 and 310.9 mg L^-1 d^-1) than in indoor assays (124.6 and 131 mg L^-1 d^-1) with 0.1 and 0.3 g L^-1 nanofibers, respectively. The outdoor assays with 0.3 g L^-1 nanofibers had 10.9% greater lipid production than the assays without nanofibers. Thus, this first study of outdoor cultivations with nanofibers as physical adsorbents of CO₂ showed the effect of nanostructures in maximizing gas biofixation and producing biomolecules that can be used to obtain bioproducts.