Quaternary ammonium surfactant structure determines selective toxicity towards bacteria: mechanisms of action and clinical implications in antibacterial prophylaxis

Naturally derived 3-aminoquinuclidine salts as new promising therapeutic agents

Quaternary ammonium compounds (QACs) are a biologically active group of chemicals with a wide range of different applications. Due to their strong antibacterial properties and broad spectrum of activity, they are commonly used as ingredients in antiseptics and disinfectants. In recent years, the spread of bacterial resistance to QACs, exacerbated by the spread of infectious diseases, has seriously threatened public health and endangered human lives. Recent trends in this field have suggested the development of a new generation of QACs, in parallel with the study of bacterial resistance mechanisms. In this work, we present a new series of quaternary 3-substituted quinuclidine compounds that exhibit potent activity across clinically relevant bacterial strains. Most of the derivatives had minimal inhibitory concentrations (MICs) in the low single-digit micromolar range. Notably, QApCl and QApBr were selected for further investigation due to their strong antibacterial activity and low toxicity to human cells along with their minimal potential to induce bacterial resistance. These compounds were also able to inhibit the formation of bacterial biofilms more effectively than commercial standard, eradicating the bacterial population within just 15 min of treatment. The candidates employ a membranolytic mode of action, which, in combination with the generation of reactive oxygen species (ROS), destabilizes the bacterial membrane. This treatment results in a loss of cell volume and alterations in surface morphology, ultimately leading to bacterial cell death. The prominent antibacterial potential of quaternary 3-aminoquinuclidines, as exemplified by QApCl and QApBr, paves the way for new trends in the development of novel generation of QACs.

Dose-dependent effects of sodium dodecyl sulfate and hydrogen peroxide treatments on methane emission from pig manure during storage

Mitigation of methane (CH4) emissions from slurry pits within pig barns can be achieved through treatment of residual slurry left after frequent flushing of the slurry pits. In this study, dosages of additives such as sodium dodecyl sulfate (SDS) and hydrogen peroxide (H2O2) were optimized to achieve reduction in CH4 emissions from residual pig slurry during storage. In addition, the effects on emissions when both the treatments were combined and the effects of SDS treatment on slurry acidified with sulfuric acid (H2SO4) were studied in order to reduce CH4 and ammonia (NH3) emissions from residual pig slurry storage. A maximum of 98% and 70% reduction in CH4 emissions were achieved with SDS and H2O2 treatments, respectively. The combination of SDS and H2O2 did not increase efficiency in reducing CH4 emissions compared to SDS treatment alone. Whereas the application of SDS to slurry acidified with H2SO4 (pH 6.2) increased the CH4 mitigation efficiency by 15-30% compared to treating slurry with only SDS. The combined treatment (SDS + H2SO4) reduced NH3 emissions by 20% compared to treating slurry with H2SO4 (pH 6.2) alone. Hereby, combined treatment (SDS + H2SO4) can reduce both CH4 and NH3 emissions, with a reduced amount of chemicals required for the treatment. Hence, application of SDS at concentrations <2 g kg-1 to acidified slurry is recommended to treat residual pig manure in pig barns.

Detergent Chemistry Modulates the Transgression of Planetary Boundaries including Antimicrobial Resistance and Drug Discovery

Detergent chemistry enables applications in the world today while harming safe operating spaces that humanity needs for survival. Aim of this review is to support a holistic thought process in the design of detergent chemistry. We harness the planetary boundary concept as a framework for literature survey to identify progresses and knowledge gaps in context with detergent chemistry and five planetary boundaries that are currently transgressed, i.e., climate, freshwater, land system, novel entities, biosphere integrity. Our survey unveils the status of three critical challenges to be addressed in the years to come, including (i) the implementation of a holistically, climate-friendly detergent industry; (ii) the alignment of materialistic and social aspects in creating technical solutions by means of sustainable chemistry; (iii) the development of detergents that serve the purpose of applications but do not harm the biosphere in their role as novel entities. Specifically, medically relevant case reports revealed that even the most sophisticated detergent design cannot sufficiently accelerate drug discovery to outperform the antibiotic resistance development that detergents simultaneously promote as novel entities. Safe operating spaces that humanity needs for its survival may be secured by directing future efforts beyond sustainable chemistry, resource efficiency, and net zero emission targets.

Cetyltrimethylammonium-chloride assisted in situ metabolic incorporation of nano-sized ROS-generating cascade-reaction containers in Gram-positive and Gram-negative peptidoglycan layers for the control of bacterially-induced sepsis

Cascade-reaction containers generating reactive oxygen species (ROS) as an alternative for antibiotic-based strategies for bacterial infection control, require endogenous oxygen-sources and ROS-generation close to or preferably inside target bacteria. Here, this is achieved by cetyltrimethylammonium-chloride (CTAC) assisted in situ metabolic labeling and incorporation of mesoporous SiO2-nanoparticles, dual-loaded with glucose-oxidase and Fe3O4-nanoparticles as cascade-reaction containers, inside bacterial cell walls. First, azide-functionalized d-alanine (D-Ala-N3) was inserted in cell wall peptidoglycan layers of growing Gram-positive pathogens. In Gram-negatives, this could only be achieved after outer lipid-membrane permeabilization, using a low concentration of CTAC. Low concentrations of CTAC had no adverse effect on in vitro blood clotting or hemolysis nor on the health of mice when blood-injected. Next, dibenzocyclooctyne-polyethylene-glycol modified, SiO2-nanoparticles were in situ click-reacted with d-Ala-N3 in bacterial cell wall peptidoglycan layers. Herewith, a two-step cascade-reaction is facilitated inside bacteria, in which glucose-oxidase generates H2O2 at endogenously-available glucose concentrations, while subsequently Fe3O4-nanoparticles catalyze generation of •OH from the H2O2 generated. Generation of •OH inside bacterial cell walls by dual-loaded mesoporous SiO2-nanoparticles yielded more effective in vitro killing of both planktonic Gram-positive and Gram-negative bacteria suspended in 10 % plasma than SiO2-nanoparticles solely loaded with glucose-oxidase. Gram-positive or Gram-negative bacterially induced sepsis in mice could be effectively treated by in situ pre-treatment with tail-vein injected CTAC and d-Ala-N3, followed by injection of dual-loaded cascade-reaction containers without using antibiotics. This makes in situ metabolic incorporation of cascade-reaction containers as described attractive for further investigation with respect to the control of other types of infections comprising planktonic bacteria. STATEMENT OF SIGNIFICANCE: In situ metabolic-incorporation of cascade-reaction-containers loaded with glucose-oxidase and Fe3O4 nanoparticles into bacterial cell-wall peptidoglycan is described, yielding ROS-generation from endogenous glucose, non-antibiotically killing bacteria before ROS inactivates. Hitherto, only Gram-positives could be metabolically-labeled, because Gram-negatives possess two lipid-membranes. The outer membrane impedes direct access to the peptidoglycan. This problem was solved by outer-membrane permeabilization using a quaternary-ammonium compound. Several studies on metabolic-labeling perform crucial labeling steps during bacterial-culturing that in real-life should be part of a treatment. In situ metabolic-incorporation as described, can be applied in well-plates during in vitro experiments or in the body as during in vivo animal experiments. Surprisingly, metabolic-incorporation proceeded unhampered in blood and a murine, bacterially-induced sepsis could be well treated.

Sulfonamide Per- and Polyfluoroalkyl Substances Can Impact Microorganisms Used in Aromatic Hydrocarbon and Trichloroethene Bioremediation

Per- and polyfluoroalkyl substances (PFASs) from aqueous film forming foams (AFFFs) can hinder bioremediation of co-contaminants such as trichloroethene (TCE) and benzene, toluene, ethylbenzene, and xylene (BTEX). Anaerobic dechlorination can require bioaugmentation of Dehalococcoides, and for BTEX, oxygen is often sparged to stimulate in situ aerobic biodegradation. We tested PFAS inhibition to TCE and BTEX bioremediation by exposing an anaerobic TCE-dechlorinating coculture, an aerobic BTEX-degrading enrichment culture, and an anaerobic toluene-degrading enrichment culture to n-dimethyl perfluorohexane sulfonamido amine (AmPr-FHxSA), perfluorohexane sulfonamide (FHxSA), perfluorohexanesulfonic acid (PFHxS), or nonfluorinated surfactant sodium dodecyl sulfate (SDS). The anaerobic TCE-dechlorinating coculture was resistant to individual PFAS exposures but was inhibited by >1000× diluted AFFF. FHxSA and AmPr-FHxSA inhibited the aerobic BTEX-degrading enrichment. The anaerobic toluene-degrading enrichment was not inhibited by AFFF or individual PFASs. Increases in amino acids in the anaerobic TCE-dechlorinating coculture compared to the control indicated stress response, whereas the BTEX culture exhibited lower concentrations of all amino acids upon exposure to most surfactants (both fluorinated and nonfluorinated) compared to the control. These data suggest the main mechanisms of microbial toxicity are related to interactions with cell membrane synthesis as well as protein stress signaling.

Effect of Organic Cation Adsorption on Ion-Transport Selectivity in a Cation-Permselective Nanopore Membrane

A key knowledge gap in the emerging field of nanofluidics concerns how the ionic composition and ion-transport properties of a nanoconfined solution differ from those of a contacting bulk solution. We and others have been using potentiometric concentration cells, where a nanopore or nanotube membrane separates salt solutions of differing concentrations to explore this issue. The membranes studied contained a fixed pore/tube wall anionic charge, which ideally would prohibit anions and salt from entering the pore/tube-confined solution. We have been investigating experimental conditions that allow for this ideally permselective cation state to be achieved. Results of potentiometric investigations of a polymeric nanopore membrane (10 ± 2 nm-diameter pores) with anionic charge due to carbonate are presented here. While studies of this type have been reported using alkaline metal and alkaline earth cations, there have been no analogous studies using organic cations. This paper uses a homologous series of tetraalkylammonium ions to address this knowledge gap. The key result is that, in contrast to the inorganic cations, the ideal cation-permselective state could not be obtained under any experimental conditions for the organic cations. We propose that this is because these hydrophobic cations adsorb onto the polymeric pore walls. This makes ideality impossible because each adsorbed alkylammonium must bring a charge-balancing anion, Cl-, with it into the nanopore solution. The alkylammonium adsorption that occurred was confirmed and quantified by using surface contact angle measurements.

Tetraalkylammonium salts (TAS) in solar energy applications - A review on in vitro and in vivo toxicity

Tetraalkylammonium salt (TAS) is an organic salt widely employed as a precursor, additive or electrolyte in solar cell applications, such as perovskite or dye-sensitized solar cells. Notably, Perovskite solar cells (PSCs) have garnered acclaim for their exceptional efficiency. However, PSCs have been associated with environmental and health concerns due to the presence of lead (Pb) content, the use of hazardous solvents, and the incorporation of TAS in their fabrication processes, which significantly contributes to environmental and human health toxicity. As a response, there is a growing trend towards transitioning to safer and biobased materials in PSC fabrication to address these concerns. However, the potential health hazards associated with TAS necessitate a thorough evaluation, considering the widespread use of this substance. Nevertheless, the overexploitation of TAS could potentially increase the disposal of TAS in the ecosystem, thus, posing a major health risk and severe pollution. Therefore, this review article presents a comprehensive discussion on the in vitro and in vivo toxicity assays of TAS as a potential material in solar energy applications, including cytotoxicity, genotoxicity, in vivo dermal, and systemic toxicity. In addition, this review emphasizes the toxicity of TAS compounds, particularly the linear tetraalkyl chain structures, and summarizes essential findings from past studies as a point of reference for the development of non-toxic and environmentally friendly TAS derivatives in future studies. The effects of the TAS alkyl chain length, polar head and hydrophobicity, cation and anion, and other properties are also included in this review.

Antibacterial and Anticandidal Activity of the Nanostructural Composite of a Spirothiazolidine-Derivative Assembled on Silver Nanoparticles

Our aims in this work are the preparation of an ionic liquid based on heterocyclic compounds with Ag nanoparticles and the investigation of its application as an antibacterial and anticandidal agent. These goals were achieved through the fabrication of an ionic liquid based on Ag nanoparticles with 5-Amino-3-(4-fluorophenyl)-N-hexadecyl-7-(4-methylphenyl)-2-H spiro[cyclohexane1,2'-[1,3]thiazolo [4,5-b]pyridine]-6-carbonitrile (P16). The nanostructure of the prepared ionic liquid was characterized using techniques such as FTIR, 1HNMR, 13CNMR, UV, SEM, and TEM. The biological activity of the prepared compound (P16) and its nanocomposites with Ag nanoparticles was tested using five clinical bacteria (Pseudomonas aeruginosa 249; Escherichia coli 141; Enterobacter cloacae 235; Staphylococcus epidermidis BC 161, and methicillin-resistant S. aureus 217), and three Candida species (Candida utilis ATCC 9255; C. tropicalis ATCC 1362, and C. albicans ATCC 20402). The FTIR, 1HNMR, and 13CNMR results confirmed the chemical structure of the synthesized P16 compound. The nanostructure of the prepared ionic liquid was determined based on data obtained from the UV, SEM, and TEM tests. The antibacterial and anticandidal results showed that the biological activity of the compound (P16) was enhanced after the formation of nanocomposite structures with Ag nanoparticles. Moreover, the biological activity of the compound itself (P16) and that of its nanocomposite structure with Ag nanoparticles was higher than that of ampicillin and amphotericin B, which were used as control drugs in this work.

Unraveling How Membrane Nanostructure Changes Impact the Eye Irritation of Nonionic Alkyl Ethoxylate Surfactants

Nonionic surfactants used in agri-spraying processes may cause varying degrees of corneal irritation when they come in direct contact with farmers' eyes, and the exact irritations are thought to be determined by how surfactants interact with corneal cell membranes. However, how nonionic surfactants interact with cell membranes at the molecular and nano levels remains largely unexplored. In this study, the interactions between nonionic surfactants (alkyl ethoxylate, C12Em) and lipid membranes were examined by membrane permeability measurement, quartz crystal microbalance with dissipation, dual polarization interferometry, confocal laser scanning microscopy, and neutron reflection, aiming to reveal complementary structural features at the molecular and nano levels. Apart from the extremely hydrophobic surfactant C12E2, all nonionic surfactants studied could penetrate the model cell membrane composed of a phosphocholine lipid bilayer. Nonionic surfactants with intermediate amphiphilicity (C12E6) rapidly fused into the lipid membrane and stimulated the formation of pores across the lipid bilayer, consistent with the cytoplasm leakage and fast cell necrosis observed from the cytotoxicity study of corneal cells. In comparison, while hydrophobic and hydrophilic surfactants [those with long and short ethoxylates (C12E4,12,23)] could cause mild structural alteration to the outer lipid layer of the membrane, these structural changes were insufficient to elicit large cytoplasmic leakage rapidly and instead cell death occurred over longer periods of time due to changes in the membrane permeability. These results reveal the strong link of surfactant-lipid membrane interactions to surfactant cytotoxicity and the association with amphiphilicity of nonionic surfactants.

Green Physical Modification of Polypropylene Fabrics by Cross-Linking Chitosan with Tannic Acid and Postmodification by Quaternary Ammonium Grafting to Improve Antibacterial Activity

A green cross-linking and straightforward method to physically trap inert fibers in a network of chitosan was implemented. The cross-linking reaction involved a biosourced and biocompatible cross-linker [tannic acid (TA)] and mild conditions in water (pH = 8.5, O2 bubbling, 60 °C, 3 h). The steric hindrance of TA led to a low but effective cross-linking rate leaving parts of primary amines of chitosan available for postmodification such as the grafting of quaternary ammoniums for antibacterial purposes. Fabric's coatings were characterized by scanning electron microscopy coupled with energy-dispersive X-ray, infrared spectroscopy, and weight gain measurements. This allowed the optimization of process conditions. No significant antioxidant activity was observed on fabrics coated with chitosan cross-linked with TA, confirming the low cross-linking rate. This low cross-linking rate allowed grafting of quaternary ammoniums for antibacterial purposes, but it is possible to consider grafting other active molecules. Biological assays were conducted on this coating to assess its antibacterial properties. Reduction of bacterial colonization on both Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative), two of the major strains responsible for nosocomial infections, confirmed the potential of the coating for antibacterial purposes. This study displays a simple and ecofriendly process to coat inert fabrics with a chitosan network containing reactive functions (primary amines) available for grafting active molecules for various purposes.

In vitro screening of imidazolium and pyrrolidinium based ionic liquids toxicity on subcellular fractions of the Mediterranean mussel Mytilus galloprovincialis

Ionic liquids (ILs) have been considered eco-friendly alternatives to conventional organic solvents. However, several studies have reported that ILs exert toxicity towards aquatic invertebrates. Applying in vitro methodology, the aim of the present study was to evaluate the potential effect of three ILs on the biochemical performance of exposed Mytilus galloprovincialis digestive gland and gills cellular fractions. Carboxylesterase might be involved in the derived toxicity mechanism of ILs as activity levels increased significantly in digestive gland exposed fractions. This group of ILs did not seem to induce genotoxicity, except in gills cellular fractions exposed to 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. In the literature, in vitro methodology has been suggested as an important complement to animal testing and in silico studies. The present research underlines its efficacy as a quick pre-screening before in vivo testing, particularly with heterogenic groups of substances with high variability in composition, such as ILs and deep eutectic solvents.

Quaternary Ammonium Compounds: A Chemical Class of Emerging Concern

Quaternary ammonium compounds (QACs), a large class of chemicals that includes high production volume substances, have been used for decades as antimicrobials, preservatives, and antistatic agents and for other functions in cleaning, disinfecting, personal care products, and durable consumer goods. QAC use has accelerated in response to the COVID-19 pandemic and the banning of 19 antimicrobials from several personal care products by the US Food and Drug Administration in 2016. Studies conducted before and after the onset of the pandemic indicate increased human exposure to QACs. Environmental releases of these chemicals have also increased. Emerging information on adverse environmental and human health impacts of QACs is motivating a reconsideration of the risks and benefits across the life cycle of their production, use, and disposal. This work presents a critical review of the literature and scientific perspective developed by a multidisciplinary, multi-institutional team of authors from academia, governmental, and nonprofit organizations. The review evaluates currently available information on the ecological and human health profile of QACs and identifies multiple areas of potential concern. Adverse ecological effects include acute and chronic toxicity to susceptible aquatic organisms, with concentrations of some QACs approaching levels of concern. Suspected or known adverse health outcomes include dermal and respiratory effects, developmental and reproductive toxicity, disruption of metabolic function such as lipid homeostasis, and impairment of mitochondrial function. QACs' role in antimicrobial resistance has also been demonstrated. In the US regulatory system, how a QAC is managed depends on how it is used, for example in pesticides or personal care products. This can result in the same QACs receiving different degrees of scrutiny depending on the use and the agency regulating it. Further, the US Environmental Protection Agency's current method of grouping QACs based on structure, first proposed in 1988, is insufficient to address the wide range of QAC chemistries, potential toxicities, and exposure scenarios. Consequently, exposures to common mixtures of QACs and from multiple sources remain largely unassessed. Some restrictions on the use of QACs have been implemented in the US and elsewhere, primarily focused on personal care products. Assessing the risks posed by QACs is hampered by their vast structural diversity and a lack of quantitative data on exposure and toxicity for the majority of these compounds. This review identifies important data gaps and provides research and policy recommendations for preserving the utility of QAC chemistries while also seeking to limit adverse environmental and human health effects.

Evaluation of a novel porous antimicrobial media for industrial and HVAC water biocontrol

A novel treatment method, consisting of pea-gravel with a marine coating supplemented with alkyldimethylbenzylammonium chloride (ADBAC or benzalkonium chloride), has been examined for its antimicrobial performance and coating stability in aqueous environments. Initial column studies examining the porous media's ability to reduce bacterial loads in heating, ventilation, and air conditioning (HVAC) water found average reductions of 94% from pre-flush levels (10⁶ colony forming unit (CFU)/mL) when assessed with R2A spread plates and 83% reductions with SimPlates. There was no observed statistical difference between the average of pre- and post-flush waters from four tests of the media without ADBAC. Taxonomic identification, by 16S rRNA gene sequencing, of colonies drawn from pre- and post-ABDAC R2A plates showed similarities with taxa observed in high frequency from prior cultivation-independent surveys of other cooling tower systems. With this proof of concept, two versions of the media were evaluated for potential coating components released during aqueous exposure. Neither released measurable volatile organic compounds (VOC) components, but one did release bisphenol A and ABDAC compounds. Subsequent column tests of the more durable coating were conducted using cultures of interest in industrial water and demonstrated significant reductions in neutralized post-column Enterococcus faecalis samples and near complete loss of Legionella pneumophila in non-neutralized fluids, but lower reductions in Pseudomonas aeruginosa.

Bolaamphiphile Analogues of 12-bis-THA Cl2 Are Potent Antimicrobial Therapeutics with Distinct Mechanisms of Action against Bacterial, Mycobacterial, and Fungal Pathogens

12-Bis-THA Cl2 [12,12'-(dodecane-1,12-diyl)-bis-(9-amino-1,2,3,4-tetrahydroacridinium) chloride] is a cationic bolalipid adapted from dequalinium chloride (DQC), a bactericidal anti-infective indicated for bacterial vaginosis (BV). Here, we used a structure-activity-relationship study to show that the factors that determine effective killing of bacterial, fungal, and mycobacterial pathogens differ, to generate new analogues with a broader spectrum of activity, and to identify synergistic relationships, most notably with aminoglycosides against Acinetobacter baumannii and Pseudomonas aeruginosa, where the bactericidal killing rate was substantially increased. Like DQC, 12-bis-THA Cl2 and its analogues accumulate within bacteria and fungi. More hydrophobic analogues with larger headgroups show reduced potential for DNA binding but increased and broader spectrum antibacterial activity. In contrast, analogues with less bulky headgroups and stronger DNA binding affinity were more active against Candida spp. Shortening the interconnecting chain, from the most lipophilic twelve-carbon chain to six, improved the selectivity index against Mycobacterium tuberculosis in vitro, but only the longer chain analogue was therapeutic in a Galleria mellonella infection model, with the shorter chain analogue exacerbating the infection. In vivo therapy of Escherichia coli ATCC 25922 and epidemic methicillin-resistant Staphylococcus aureus 15 (EMRSA-15) infections in Galleria mellonella was also achieved with longer-chain analogues, as was therapy for an A. baumannii 17978 burn wound infection with a synergistic combination of bolaamphiphile and gentamicin. The present study shows how this class of bolalipids may be adapted further to enable a wider range of potential applications. IMPORTANCE While we face an acute threat from antibiotic resistant bacteria and a lack of new classes of antibiotic, there are many effective antimicrobials which have limited application due to concerns regarding their toxicity and which could be more useful if such risks are reduced or eliminated. We modified a bolalipid antiseptic used in throat lozenges to see if it could be made more effective against some of the highest-priority bacteria and less toxic. We found that structural modifications that rendered the lipid more toxic against human cells made it less toxic in infection models and we could effectively treat caterpillars infected with either Mycobacterium tuberculosis, methicillin resistant Staphylococcus aureus, or Acinetobacter baumannii. The study provides a rationale for further adaptation toward diversifying the range of indications in which this class of antimicrobial may be used.

A fluorescently labelled quaternary ammonium compound (NBD-DDA) to study resistance mechanisms in bacteria

Quaternary ammonium compounds (QACs) are widely used as active agents in disinfectants, antiseptics, and preservatives. Despite being in use since the 1940s, there remain multiple open questions regarding their detailed mode-of-action and the mechanisms, including phenotypic heterogeneity, that can make bacteria less susceptible to QACs. To facilitate studies on resistance mechanisms towards QACs, we synthesized a fluorescent quaternary ammonium compound, namely N-dodecyl-N,N-dimethyl-[2-[(4-nitro-2,1,3-benzoxadiazol-7-yl)amino]ethyl]azanium-iodide (NBD-DDA). NBD-DDA is readily detected by flow cytometry and fluorescence microscopy with standard GFP/FITC-settings, making it suitable for molecular and single-cell studies. As a proof-of-concept, NBD-DDA was then used to investigate resistance mechanisms which can be heterogeneous among individual bacterial cells. Our results reveal that the antimicrobial activity of NBD-DDA against Escherichia coli, Staphylococcus aureus and Pseudomonas aeruginosa is comparable to that of benzalkonium chloride (BAC), a widely used QAC, and benzyl-dimethyl-dodecylammonium chloride (BAC₁₂), a mono-constituent BAC with alkyl-chain length of 12 and high structural similarity to NBD-DDA. Characteristic time-kill kinetics and increased tolerance of a BAC tolerant E. coli strain against NBD-DDA suggest that the mode of action of NBD-DDA is similar to that of BAC. As revealed by confocal laser scanning microscopy (CLSM), NBD-DDA is preferentially localized to the cell envelope of E. coli, which is a primary target of BAC and other QACs. Leveraging these findings and NBD-DDA's fluorescent properties, we show that reduced cellular accumulation is responsible for the evolved BAC tolerance in the BAC tolerant E. coli strain and that NBD-DDA is subject to efflux mediated by TolC. Overall, NBD-DDA's antimicrobial activity, its fluorescent properties, and its ease of detection render it a powerful tool to study resistance mechanisms of QACs in bacteria and highlight its potential to gain detailed insights into its mode-of-action.

Modified Compositions of Micelle–Clay and Liposome–Clay Composites for Optimal Removal from Water of Bacteria and Hydrophobic Neutral Chemicals

The efficiency in water treatment by granulated complexes formed from the clay bentonite with (i) micelles of the cations of octadecyltrimethyl-ammonium (ODTMA) or (ii) liposomes of didodecyldimethyl-ammonium (DDAB) was investigated. The bentonite–ODTMA complexes were synthesized in three variations: I. mass ratio of 68/32, which resulted in an excess of positive charge of half of the clay cation exchange capacity and is denoted “ordinary”; II. complexes having higher loads of ODTMA, denoted “enriched”; and III. “neutral”. These variations were designed to optimize the efficiency and reduce the costs of water treatment. “Ordinary” and “neutral” complexes of DDAB were also synthesized. The “ordinary” complex of ODTMA was shown to be efficient in the removal of anionic/hydrophobic molecules and bacteria. The “enriched” complexes were more active in removal of bacteria from water by filtration due to the higher release of free ODTMA cations, which causes biostatic/biocidal effects. The corresponding “ordinary” and “neutral” complexes of ODTMA and DDAB yielded the same efficiency in removal from water of the neutral and hydrophobic herbicides, S-metolachlor (i) and alachlor (ii), respectively. Model calculations, which considered sorption/desorption and convection yielded simulations and predictions of filtration results of the herbicides. The neutral complexes are advantageous since their production saves about 1/3 of the amount of ODTMA or DDAB, which constitutes the expensive component in the respective composite.

Assessing the risk of resistance to cationic biocides incorporating realism-based and biophysical approaches

The control of microorganisms is a key objective in disease prevention and in medical, industrial, domestic, and food-production environments. Whilst the effectiveness of biocides in these contexts is well-evidenced, debate continues about the resistance risks associated with their use. This has driven an increased regulatory burden, which in turn could result in a reduction of both the deployment of current biocides and the development of new compounds and formulas. Efforts to balance risk and benefit are therefore of critical importance and should be underpinned by realistic methods and a multi-disciplinary approach, and through objective and critical analyses of the literature. The current literature on this topic can be difficult to navigate. Much of the evidence for potential issues of resistance generation by biocides is based on either correlation analysis of isolated bacteria, where reports of treatment failure are generally uncommon, or laboratory studies that do not necessarily represent real biocide applications. This is complicated by inconsistencies in the definition of the term resistance. Similar uncertainties also apply to cross-resistance between biocides and antibiotics. Risk assessment studies that can better inform practice are required. The resulting knowledge can be utilised by multiple stakeholders including those tasked with new product development, regulatory authorities, clinical practitioners, and the public. This review considers current evidence for resistance and cross-resistance and outlines efforts to increase realism in risk assessment. This is done in the background of the discussion of the mode of application of biocides and the demonstrable benefits as well as the potential risks.

Preparation of Antimicrobial Coatings from Cross-Linked Copolymers Containing Quaternary Dodecyl-Ammonium Compounds

One of the concerns today’s societies face is the development of resistant pathogenic microorganisms. The need to tackle this problem has driven the development of innovative antimicrobial materials capable of killing or inhibiting the growth of microorganisms. The present study investigates the dependence of the antimicrobial activity and solubility properties on the hydrophilicity/hydrophobicity ratio of antimicrobial coatings based on quaternary ammonium compounds. In this line, suitable hydrophilic and hydrophobic structural units were selected for synthesizing the antimicrobial copolymers poly(4-vinylbenzyl dimethyldodecylammonium chloride-co-acrylic acid), P(VBCDDA-co-AA20) and poly(dodecyltrimethylammonium 4-styrene sulfonate-co-glycidyl methacrylate), P(SSAmC₁₂-co-GMA20), bearing an alkyl chain of 12 carbons either through covalent bonding or through electrostatic interaction. The cross-linking reaction of the carboxylic group of acrylic acid (AA) with the epoxide group of glycidyl methacrylate (GMA) of these two series of reactive antimicrobial copolymers was explored in blends, obtained through solution casting after curing at various temperatures. The release of the final products in pure water and NaCl 1 M solutions (as analyzed by gravimetry and total organic carbon, TOC/total nitrogen, TN analyses), could be controlled by the coating composition. The cross-linked polymeric membranes of composition 60/40 w/w % ratios led to 97.8 and 99.7% mortality for Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), respectively, whereas the coating 20/80 w/w % resulted in 96.6 and 99.8% cell reduction. Despite the decrease in hydrophobicity (from a 16- to a 12-carbon alkyl chain), the new materials maintained the killing efficacy, while at the same time resulting in increased release to the aqueous solution.

Antiviral and antibacterial activity of hand sanitizer and surface disinfectant formulations

Emergent diseases caused by viral and bacterial infections have proven to be a current and future challenge. The occurrence of these diseases is usually accompanied by the lack of vaccines and dedicated therapies leaving prevention as the best strategy to adopt. In that context, and apart from confinement and physical distancing measures, an increase in hygiene actions, namely hand and surface cleaning and disinfection can reduce the infection spread originated from our day-to-day routines. However, during crisis situations the high disinfectants demand can very likely lead to having them running out of stock. This impels many individuals and companies to produce their own disinfectants. Here, we explore the main components of a disinfection formulation, both for hand-rub and surface cleaning. Alcohol and non-alcohol based formulations are described, including the possibility to fine tune the properties of the final product in order to increase public acceptance while maintaining product efficacy. The action mechanisms of the main active principles are also described conjugating information from experimental and theoretical data. Overall, the main aspects to develop a disinfectant formulation are addressed, as well as their function, helping formulation developers to better understand the impact of their choices.

A comprehensive review of the antibacterial activity of dimethylaminohexadecyl methacrylate (DMAHDM) and its influence on mechanical properties of resin-based dental materials

The repetitive restorative cycle should be avoided, aiming at the smallest number of restorations' replacements to ensure greater tooth longevity. Antibacterial materials associated with the control of caries etiological factors can help improve restoration's durability. This review aimed to analyze the results of in vitro studies that added Dimethylaminohexadecyl methacrylate (DMAHDM), an antibacterial monomer, to restorative materials. The PubMed, SCOPUS, Web of Science, and Biblioteca Virtual em Saúde databases were screened for studies published between 2015 and 2020. After full-text reading, 24 articles were included in the final sample. DMAHDM has demonstrated antibacterial efficacy against several bacteria related to dental caries and periodontal diseases, causing a transition in the biofilm balance without inducing resistance. When DMAHDM was included in acrylic resin, the material cytotoxicity increased, and changes in mechanical properties were observed. In contrast, resin composites had their mechanical properties maintained in most studies; however, toxicity was not examined. The association between DMAHDM and 2-methacryloyloxyethyl phosphorylcholine or silver nanoparticles improved the antibacterial effect. Besides, the association with nanoparticles of amorphous calcium phosphate or nanoparticles of calcium fluoride can provide remineralization capacity. There is a lack of information on the cytotoxicity and bacteria resistance induction, and further studies are needed to address this.

The Synthesis and Evaluation of Aminocoumarin Peptidomimetics as Cytotoxic Agents on Model Bacterial E. coli Strains

This work presents the successful synthesis of a library of novel peptidomimetics via Ugi multicomponent reaction. Most of these peptidomimetics contain differently substituted aminocoumarin; 7-amino-4-methylcoumarin and 7-amino-4-(trifluoromethyl) coumarin. Inspired by the biological properties of coumarin derivatives and peptidomimetics, we proposed the synthesis of coumarin incorporated peptidomimetics. We studied the potential of synthesized compounds as antimicrobial drugs on model E. coli bacterial strains (k12 and R2–R4). To highlight the importance of coumarin in antimicrobial resistance, we also synthesized the structurally similar peptidomimetics, using benzylamine. Preliminary cellular studies suggest that the compounds with coumarin derivatives have more potential as antimicrobial agents compared to the compounds without coumarin. We also analyzed the effect of aldehyde, free acid group and ester group on the course of their antimicrobial properties.

The Use of Catalytic Amounts of Selected Cationic Surfactants in the Design of New Synergistic Preservative Solutions

Preservation using combinations of antibacterial molecules has several advantages, such as reducing the level of usage and broadening their antimicrobial spectrum. More specifically, the use of quaternary ammonium surfactants (QAS)—which are profusely used in hair care products and some are known as efficient antimicrobial agents—is limited due to some potential cytotoxicity concerns. This study shows that the concentration of some widely used cosmetic preservatives can be decreased when combined with very small quantities of QAS, i.e., Polyquaternium-80 (P-80) and/or Didecyldimethylammonium chloride (DDAC). The antimicrobial activity of their mixtures was first evaluated by determining the minimum inhibitory concentration (MIC) before and after the addition of QAS. Following up on this finding and targeting an ultimate consumer friendly antimicrobial blend, yet with optimal safety, we chose to utilize the food-grade preservative Maltol as the main natural origin antimicrobial agent mixed with minimum concentrations of QAS to improve its moderate antimicrobial properties. The preservatives were tested for MIC values, challenge tests and synergy using the fractional inhibitory concentration index (FICI). The antimicrobial efficacy of Maltol was found to be synergistically improved by introducing catalytic amounts of P-80 and/or DDAC.

Biological activity of quaternary ammonium salts and resistance of microorganisms to these compounds

Quaternary ammonium salts (QASs) are ubiquitous in nature, being found in organisms ranging from microorganisms to vertebrates (e.g., glycine betaine, carnitine) where they have important cellular functions. QASs are also obtained by chemical synthesis. These compounds, due to their diverse chemical structure (e.g. monomeric QAS or gemini) and their biological properties, are widely used in medicine (as disinfectants, drugs, and DNA carriers), industry, environmental protection and agriculture (as preservatives, biocides, herbicides and fungicides). Discussed chemical compounds reduce the adhesion of microorganisms to various biotic and abiotic surfaces and cause the eradication of biofilms produced by pathogenic microorganisms. The properties of these chemicals depend on their chemical structure (length of the alkyl chain, linker and counterion), which has a direct impact on the physicochemical and biological activity of these compounds. QASs by incorporation into the membranes, inhibit the activity of proteins (H⁺-ATPase) and disrupt the transport of substances to the cell. Moreover, in the presence of QASs, changes in lipid composition (qualitative and quantitative) of plasma membrane are observed. The widespread use of disinfectants in commercial products can induce resistance in microorganisms to these surfactants and even to antibiotics. In this article we discuss the biological activity of QASs as cationic surfactants against microorganisms and their resistance to these compounds.

Thiacalixarene based quaternary ammonium salts as promising antibacterial agents

The search for new antibacterial and antiseptic drugs is an urgent problem due to the resistance of microorganisms to existing drugs. In this work, for the first time, the design of antibacterial and bactericidal agents based on quaternary ammonium compounds on thiacalixarene macrocyclic platform was proposed and implemented. A series of tetrasubstituted quaternary ammonium salts with different nature and length of the substituent (-N⁺(CH₃)₂R, R = CH₂Ph, C_nH_2n+1, n = 1, 4, 8, 10) based on p-tert-butylthiacalix[4]arene in cone and 1,3-alternate conformations was obtained with excellent yields. The obtained compounds have a high antibacterial effect against Gram-positive (S. aureus, S. epidermidis, B. subtilis) bacteria comparable with commercial antiseptics chlorhexidine, miramistin and benzalkonium chloride. It was found that quaternary ammonium derivatives of thiacalix[4]arene in 1,3-alternate conformation more effectively inhibit the growth of the tested bacterial strains in comparison with compounds in cone conformation. Cytotoxicity studies on human skin fibroblast (HSF) cells demonstrated that all compounds were less toxic compared to reference drugs. The different type of interaction of the studied compounds with model DPPC lipid membranes explains different antibacterial activity and cytotoxicity of compounds. The compounds in cone conformation are adsorbed on the DPPC vesicles membrane surface, while the incorporation of lipophilic alkyl fragments of macrocycles in 1,3-alternate conformation into the membrane leads to "clumping" of DPPC vesicles. It was shown the saving of antibacterial activity of thiacalixarene derivatives in 1,3-alternate conformation on Gram-positive clinical strains. The obtained results allow viewing the described thiacalixarene based quaternary ammonium compounds as promising molecules in the development of the new antibacterial agents.

Applications of Chemically Modified Clay Minerals and Clays to Water Purification and Slow Release Formulations of Herbicides

This review deals with modification of montmorillonite and other clay-minerals and clays by interacting them with organic cations, for producing slow release formulations of herbicides, and efficient removal of pollutants from water by filtration. Elaboration is on incorporating initially the organic cations in micelles and liposomes, then producing complexes denoted micelle- or liposome-clay nano-particles. The material characteristics (XRD, Freeze-fracture electron microscopy, adsorption) of the micelle– or liposome–clay complexes are different from those of a complex of the same composition (organo-clay), which is formed by interaction of monomers of the surfactant with the clay-mineral, or clay. The resulting complexes have a large surface area per weight; they include large hydrophobic parts and (in many cases) have excess of a positive charge. The organo-clays formed by preadsorbing organic cations with long alkyl chains were also addressed for adsorption and slow release of herbicides. Another examined approach includes “adsorptive” clays modified by small quaternary cations, in which the adsorbed organic cation may open the clay layers, and consequently yield a high exposure of the siloxane surface for adsorption of organic compounds. Small scale and field experiments demonstrated that slow release formulations of herbicides prepared by the new complexes enabled reduced contamination of ground water due to leaching, and exhibited enhanced herbicidal activity. Pollutants removed efficiently from water by the new complexes include (i) hydrophobic and anionic organic molecules, such as herbicides, dissolved organic matter; pharmaceuticals, such as antibiotics and non-steroidal drugs; (ii) inorganic anions, e.g., perchlorate and (iii) microorganisms, such as bacteria, including cyanobacteria (and their toxins). Model calculations of adsorption and kinetics of filtration, and estimation of capacities accompany the survey of results and their discussion.

Comparative Proteomics of Marinobacter sp. TT1 Reveals Corexit Impacts on Hydrocarbon Metabolism, Chemotactic Motility, and Biofilm Formation

The application of chemical dispersants during marine oil spills can affect the community composition and activity of marine microorganisms. Several studies have indicated that certain marine hydrocarbon-degrading bacteria, such as Marinobacter spp., can be inhibited by chemical dispersants, resulting in lower abundances and/or reduced biodegradation rates. However, a major knowledge gap exists regarding the mechanisms underlying these physiological effects. Here, we performed comparative proteomics of the Deepwater Horizon isolate Marinobacter sp. TT1 grown under different conditions. Strain TT1 received different carbon sources (pyruvate vs. n-hexadecane) with and without added dispersant (Corexit EC9500A). Additional treatments contained crude oil in the form of a water-accommodated fraction (WAF) or chemically-enhanced WAF (CEWAF; with Corexit). For the first time, we identified the proteins associated with alkane metabolism and alginate biosynthesis in strain TT1, report on its potential for aromatic hydrocarbon biodegradation and present a protein-based proposed metabolism of Corexit components as carbon substrates. Our findings revealed that Corexit exposure affects hydrocarbon metabolism, chemotactic motility, biofilm formation, and induces solvent tolerance mechanisms, like efflux pumps, in strain TT1. This study provides novel insights into dispersant impacts on microbial hydrocarbon degraders that should be taken into consideration for future oil spill response actions.

Screening and Matching Amphiphilic Cationic Polymers for Efficient Antibiosis

The amphiphilic cationic polymers that mimic antimicrobial peptides have received increasing attention due to their excellent antibacterial activity. However, the relationship between the structure of cationic polymers and its antibacterial effect remains unclear. In our current work, a series of PEG blocked amphiphilic cationic polymers composed of hydrophobic alkyl-modified and quaternary ammonium salt (QAS) moieties have been prepared. The structure-antibacterial activity relationship of these cationic polymers was investigated against E. coli and S. aureus, including PEGylation, random structure, molecular weights, and the content and lengths of the hydrophobic alkyl side chains. The results indicated that PEGylated random amphiphilic cationic copolymer (mPB₃₅/T₅₇) showed stronger antibacterial activity and better biocompatibility than the random copolymer without PEG (PB₃₃/T₅₆). Furthermore, mPB₃₅/T₅₇ with appropriate mole fraction of alkyl side chains (f_alkyl = 0.38), degree of polymerization (DP = 92), and four-carbon hydrophobic alkyl moieties was found to have the optimal structure that revealed the best antibacterial activities against both E. coli (MIC = 8 μg/mL, selectivity > 250) and S. aureus (MIC = 4 μg/mL, selectivity > 500). More importantly, mPB₃₅/T₅₇ could effectively eradicate E. coli biofilms by killing the bacteria embedded in the biofilms. Therefore, the structure of mPB₃₅/T₅₇ provided valuable information for improving the antibacterial activity of cationic polymers.

The structure - Activity correlation in the family of dicationic imidazolium surfactants: Antimicrobial properties and cytotoxic effect

BACKGROUND

The development of new effective microbicide surfactants and the search for the structure-biological activity relationship is an important and promising problem. Surfactants containing imidazolium fragment attract attention of researchers in the field of chemotherapy, because these compounds often exhibit high antimicrobial activity. The aim of this work is to identify the newly synthesized surfactants from the viewpoint of their potential usefulness in pharmacology and medicine. For this purpose, a detailed study of antimicrobial, hemolytic and cytotoxic activity of dicationic alkylimidazolium surfactants of the m-s-m (Im) series with a variable length of a hydrocarbon tail (m = 10, 12) and a spacer fragment (s = 2, 3, 4) was carried out.

METHODS

Aggregation of surfactants in solutions was estimated by tensiometry and conductivity. Antimicrobial activity was determined by the serial dilution technique. Cytotoxic effects of the test compounds on human cancer and normal cells were estimated by means of the multifunctional Cytell Cell Imaging system. Cell Apoptosis Analysis was made by flow cytometry.

RESULTS

The test compounds show high antimicrobial activity against a wide range of test microorganisms and do not possess high hemolytic activity. Importantly, some of them display a bactericidal activity comparable to ciprofloxacin fluoroquinolone antibiotic against Gram-positive bacteria, including methicillin-resistant strains of S. aureus (MRSA). The cytotoxicity of the compounds against normal and tumor human cell lines has been tested as well, with cytotoxic effect and selectivity strongly controlled by structural factor and kind of cell line. Superior results were revealed for compound 10-4-10 (Im) in the case of HuTu 80 cell line (duodenal adenocarcinoma), for which IC₅₀ value at the level of doxorubicin and a markedly higher selectivity index (SI 7.5) were demonstrated. Flow cytometry assay shows apoptosis-inducing effect of this compound on HuTu 80 cells, through significant changes in the potential of mitochondrial membrane.

MAJOR CONCLUSIONS

Antibacterial properties are shown to be controlled by alkyl chain length, with the highest activity demonstrated by surfactants with decyl tail, with the length of the spacer fragment showing practically no effect. The results indicate that the mechanism of cytotoxic effect of the compounds can be associated with the induction of apoptosis via the mitochondrial pathway.

GENERAL SIGNIFICANCE

Selectivity against pathogenic microorganisms and low toxicity against eukaryotic cells allow considering dicationic imidazolium surfactants as new effective antimicrobial agents. At the same time, high selectivity against some cancer cell lines indicates the prospect of their using as components of new anticancer drugs.

Structure and Antiparasitic Activity Relationship of Alkylphosphocholine Analogues against Leishmania donovani

Miltefosine (Milt) is the only oral treatment for visceral leishmaniasis (VL) but its use is associated with adverse effects, e.g., teratogenicity, vomiting, diarrhoea. Understanding how its chemical structure induces cytotoxicity, whilst not compromising its anti-parasitic efficacy, could identify more effective compounds. Therefore, we systemically modified the compound’s head, tail and linker tested the in vitro activity of three alkylphosphocholines (APC) series against Leishmania donovani strains with different sensitivities to antimony. The analogue, APC12, with an alkyl carbon chain of 12 atoms, was also tested for anti-leishmanial in vivo activity in a murine VL model. All APCs produced had anti-leishmanial activity in the micromolar range (IC₅₀ and IC₉₀, 0.46– > 82.21 µM and 4.14–739.89 µM; 0.01– > 8.02 µM and 0.09–72.18 µM, respectively, against promastigotes and intracellular amastigotes). The analogue, APC12 was the most active, was 4–10 fold more effective than the parent Milt molecule (APC16), irrespective of the strain’s sensitivity to antimony. Intravenous administration of 40 mg/kg APC12 to L. donovani infected BALB/c mice reduced liver and spleen parasite burdens by 60 ± 11% and 60 ± 19%, respectively, while oral administration reduced parasite load in the bone marrow by 54 ± 34%. These studies confirm that it is possible to alter the Milt structure and produce more active anti-leishmanial compounds.

Coumarin Derivatives as New Toxic Compounds to Selected K12, R1-R4 E. coli Strains

Coumarins are natural compounds that were detected in 80 species of plants. They have numerous applications including the medical, food, tobacco, perfumery, and spirit industries. They show anti-swelling and diastolic effects. However, excess consumption of coumarins may adversely affect our health, because they are easily absorbed from the intestines into the lymph and blood, causing cirrhosis of the liver. Peptidomimetics are molecules whose structure and function are similar to those of peptides. They are an important group of compounds with biological, microbiological, anti-inflammatory, and anti-cancer properties. Therefore, studies on new peptidomimetics, which load the effect of native peptides, whose half-life in the body is much longer due to structural modifications, are extremely important. A preliminary study of coumarin analogues and its derivatives as new potential antimicrobial drugs containing carboxylic acid or ester was performed to determine their basic structure related to their biological features against various types of Gram-stained bacteria by lipopolysaccharide (LPS). We hypothesized that the toxicity (antibacterial activity) of coumarin derivatives is dependent on the of LPS in bacteria and nature and position of the substituent which may be carboxylic acid, hydroxyl groups, or esters. In order to verify this hypothesis, we used K12 (smooth) and R1–R4 (rough) Escherichia coli strains which are characterized by differences in the type of LPS, especially in the O-antigen region, the outermost LPS layer. In our work, we synthesized 17 peptidomimetics containing a coumarin scaffold and checked their influence on K12 and R1–R4 E. coli strains possessing smooth and rough LPS. We also measured the damage of plasmid DNA caused by target compounds. The results of our studies clearly support the conclusion that coumarin peptidomimetics are antagonistic compounds to many of the currently used antibiotics. The high biological activity of the selected coumarin peptidomimetic was associated with identification of the so-called magic methyl groups, which substantially change the biochemical properties of target compounds. Investigating the effects of these compounds is particularly important in the era of increasingly common resistance in bacteria.

Effect of dipole moment on amphiphile solubility and partition into liquid ordered and liquid disordered phases in lipid bilayers

Association of amphiphiles with biomembranes is important for their availability at specific locations in organisms and cells, being critical for their biological function. A prominent role is usually attributed to the hydrophobic effect, and to electrostatic interactions between charged amphiphiles and lipids. This work explores a closely related and complementary aspect, namely the contribution made by dipole moments to the strength of the interactions established. Two xanthene amphiphiles with opposite relative orientations of their dipole and amphiphilic moments have been selected (Rhodamine-C₁₄ and Carboxyfluorescein-C₁₄). The membranes studied have distinct lipid compositions, representing typical cell membrane pools, ranging from internal membranes to the outer and inner leaflet of the plasma membrane. A comprehensive study is reported, including the affinity of the amphiphiles for the different membranes, the stability of the amphiphiles as monomers and their tendency to form small clusters, as well as their transverse location in the membrane. The orientation of the amphiphile dipole moment, which determines whether its interaction with the membrane dipole potential is repulsive or attractive, is found to exert a large influence on the association of the amphiphile with ordered lipid membranes. These interactions are also responsible for the formation of small clusters or stabilization of amphiphile monomers in the membrane. The results obtained allow understanding the prevalence of protein lipidation at the N-terminal for efficient targeting to the plasma membrane, as well as the tendency of GPI-anchored proteins (usually lipidated at the C-terminal) to form small clusters in the membrane ordered domains.

Development of chimeric peptides to facilitate the neutralisation of lipopolysaccharides during bactericidal targeting of multidrug-resistant Escherichia coli

Pathogenic Escherichia coli can cause fatal diarrheal diseases in both animals and humans. However, no antibiotics or antimicrobial peptides (AMPs) can adequately kill resistant bacteria and clear bacterial endotoxin, lipopolysaccharide (LPS) which leads to inflammation and sepsis. Here, the LPS-targeted smart chimeric peptides (SCPs)-A6 and G6 are generated by connecting LPS-targeting peptide-LBP14 and killing domain-N6 via different linkers. Rigid and flexible linkers retain the independent biological activities from each component. SCPs-A6 and G6 exert low toxicity and no bacterial resistance, and they more rapidly kill multiple-drug-resistant E. coli and more effectively neutralize LPS toxicity than N6 alone. The SCPs can enhance mouse survival more effectively than N6 or polymyxin B and alleviate lung injuries by blocking mitogen-activated protein kinase and nuclear factor kappa-B p65 activation. These findings uniquely show that SCPs-A6 and G6 may be promising dual-function candidates as improved antibacterial and anti-endotoxin agents to treat bacterial infection and sepsis.

Wang ZL and Wang XM design bactericidal peptides in which an antimicrobial domain is fused to a domain that facilitates the neutralisation of lipoplysaccaride (LPS) to prevent inflammation associated with the targeting of Gram-negative bacteria. They characterise their properties and structures, and show their efficiency in vitro and in vivo.

Impacts of Organomodified Nanoclays and Their Incinerated Byproducts on Bronchial Cell Monolayer Integrity

Incorporation of engineered nanomaterials (ENMs) into nanocomposites using advanced manufacturing strategies is set to revolutionize diverse technologies. Of these, organomodified nanoclays (ONCs; i.e., smectite clays with different organic coatings) act as nanofillers in applications ranging from automotive to aerospace and biomedical systems. Recent toxicological evaluations increased awareness that exposure to ONC can occur along their entire life cycle, namely, during synthesis, handling, use, manipulation, and disposal. Compared to other ENMs, however, little information exists describing which physicochemical properties contribute to induced health risk. This study conducted high content screening on bronchial epithelial cell monolayers for coupled high-throughput in vitro assessment strategies aimed to evaluate acute toxicity of a library of ONCs (all of prevalent use) prior to and after simulated disposal by incineration. Coating-, incineration status-, and time-dependent effects were considered to determine changes in the pulmonary monolayer integrity, cell transepithelial resistance, apoptosis, and cell metabolism. Results showed that after exposure to each ONC at its half-maximal inhibitory concentration (IC₅₀) there is a material-induced toxicity effect with pristine nanoclay, for instance, displaying acute loss of monolayer coverage, resistance, and metabolism, coupled with increased number of apoptotic cells. Conversely, the other three ONCs tested displayed little loss of monolayer integrity; however, they exhibited differential coating-dependent increased apoptosis and up to 40-45% initial reduction in cell metabolism. Moreover, incinerated byproducts of ONCs exhibited significant loss of monolayer coverage and integrity, increased necrosis, with little evidence of monolayer re-establishment. These findings indicate that characteristics of organic coating type largely determine the mechanism of cytotoxicity and the ability of the monolayer to recover. Use of high content screening coupled with traditional in vitro assays proves to serve as a rapid pulmonary toxicity assessment tool to help define prevention by targeted physicochemical material properties design strategies.

Ionic liquids strongly affect the interaction of bacteria with magnesium oxide and silica nanoparticles

Quaternary ammonium theophylline-based ionic liquids and imidazolium-based ionic liquids, magnesium oxide and silica nanoparticles were used in order to investigate the interaction with Gram negative Escherichia coli and Gram positive Bacillus cereus. The changes of bacterial sensitivity to both nanoparticles (NPs) and ionic liquids (ILs) were examined. In order to assess the impact of ILs on the interaction of nanoparticles with bacteria, respirometric analysis, activity of dehydrogenases, peroxidase analyses as well as scanning and fluorescence microscopy examinations were conducted. The interactions of ILs with nanoparticles based on adsorption and sedimentation tests were also investigated in order to assess how the ILs affect the agglomeration of NPs. It was assumed, as the main hypothesis of the present studies, that the differences in sensitivity of bacteria to combined ILs and NPs can be observed, even if the concentration of both compounds are below the minimum inhibitory concentration (MIC). The results indicated that ILs strongly affected the sensitivity of bacteria to nanoparticles however, the changes of sensitivity depended on the surface characteristics of the nanoparticles. The presence of ILs at non-lethal concentrations caused an increase of bacterial sensitivity to MgO nanoparticles. Notably, the sensitivity of Gram positive bacteria increased significantly when ILs were present. This was an important observation because the toxicity of nanoparticles toward Gram positive bacteria is usually lower than their toxicity toward Gram negative bacteria. Using silica nanoparticles, the presence of ionic liquids caused the adsorption of bacteria onto the surface of nanoparticle agglomerates. In conclusion, two opposing effects have been observed. On the one hand, the toxicity of MgO NPs in the presence of ILs has increased. On the other hand, the presence of silica nanoparticles caused a decreased sensitivity of both types of bacteria toward ILs. Our studies indicate potentially useful processes in many environmantal protection technologies like water treatment where flocculation and disinfection are extremely needed.

A Novel Dental Sealant Containing Dimethylaminohexadecyl Methacrylate Suppresses the Cariogenic Pathogenicity of Streptococcus mutans Biofilms

Cariogenic oral biofilms are strongly linked to dental caries around dental sealants. Quaternary ammonium monomers copolymerized with dental resin systems have been increasingly explored for modulation of biofilm growth. Here, we investigated the effect of dimethylaminohexadecyl methacrylate (DMAHDM) on the cariogenic pathogenicity of Streptococcus mutans (S. mutans) biofilms. DMAHDM at 5 mass% was incorporated into a parental formulation containing 20 mass% nanoparticles of amorphous calcium phosphate (NACP). S. mutans biofilms were grown on the formulations, and biofilm inhibition and virulence properties were assessed. The tolerances to acid stress and hydrogen peroxide stress were also evaluated. Our findings suggest that incorporating 5% DMAHDM into 20% NACP-containing sealants (1) imparts a detrimental biological effect on S. mutans by reducing colony-forming unit counts, metabolic activity and exopolysaccharide synthesis; and (2) reduces overall acid production and tolerance to oxygen stress, two major virulence factors of this microorganism. These results provide a perspective on the value of integrating bioactive restorative materials with traditional caries management approaches in clinical practice. Contact-killing strategies via dental materials aiming to prevent or at least reduce high numbers of cariogenic bacteria may be a promising approach to decrease caries in patients at high risk.

Enhancement and Mechanism of a Lignin Amphoteric Surfactant on the Production of Cellulosic Ethanol from a High-Solid Corncob Residue

A lignin amphoteric surfactant and betaine could enhance the enzymatic hydrolysis of lignocellulose and recover cellulase. The effects of lignosulfonate quaternary ammonium salt (SLQA) and dodecyl dimethyl betaine (BS12) on enzymatic hydrolysis digestibility, ethanol yield, yeast cell viability, and other properties of high-solid enzymatic hydrolysis and fermentation of a corncob residue were studied in this research. The results suggested that SLQA and 1 g/L BS12 effectively improved the ethanol yield through enhancing enzymatic hydrolysis. SLQA had no significant effect on the yeast cell membrane and glucose fermentation. However, 5 g/L BS12 reduced the ethanol yield as a result of the fact that 5 g/L BS12 damaged the yeast cell membrane and inhibited the conversion of glucose to ethanol. Our research also suggested that 1 g/L BS12 enhanced the ethanol yield of corncob residue fermentation, which was attributed to the fact that lignin in the corncob adsorbed BS12 and decreased its concentration in solution to a safe level for the yeast.

New Polymeric Films with Antibacterial Activity Obtained by UV-induced Copolymerization of Acryloyloxyalkyltriethylammonium Salts with 2-Hydroethyl Methacrylate

New polymeric films with antibacterial activity have been prepared, by simple UV-induced copolymerization of readily available ω-(acryloyloxy)-N,N,N-triethylalcan-1-aminium bromides (or acryloyloxyalkyltriethylammonium bromides, AATEABs) with commercially available 2-hydroethyl methacrylate (HEMA), at different relative amounts. In particular, the antibacterial activity of polymeric films derived from 11-(acryloyloxy)-N,N,N-triethylundecan-1-aminium bromide (or acryloyloxyundecyltriethylammonium bromide, AUTEAB; bearing a C-11 alkyl chain linker between the acrylate polymerization function and the quaternary ammonium moiety) and 12-(acryloyloxy)-N,N,N-triethyldodecan-1-aminium bromide (or acryloyldodecyltriethylammonium bromide, ADTEB, bearing a C-12 alkyl chain linker) has been assessed against Gram-negative Escherichia Coli and Gram-positive Staphylococcus aureus cells. The results obtained have shown a clear concentration-dependent activity against both bacterial strains, the films obtained from homopolymerization of pure AUTEAB and ADTEAB being the most effective. Moreover, ADTEAB-based films showed a higher antibacterial activity with respect to the AUTEAB-based ones. Interestingly, however, both types of films presented a significant activity not only toward Gram-positive S. aureus, but also toward Gram-negative E. Coli cells.

Preparation and Evaluation of Antimicrobial Hyperbranched Emulsifiers for Waterborne Coatings

Nosocomial infections are a major problem in medical health care. To solve this problem, a series of antimicrobial waterborne paints were prepared by using antimicrobial hyperbranched (HB) emulsifiers. The HB-emulsifiers were prepared by polymerizing AB₂ monomers obtained in a one-step reaction of bis(hexamethylene)triamine and carbonyl biscaprolactam. The blocked isocyanate end groups (B groups) of the HB-polymer were utilized to introduce tertiary amino groups through the reaction with compounds comprising either a hydroxyl or a primary amino group and a tertiary amino group. Quaternization of the tertiary amines with 6 different alkyl bromides resulted in 12 amphiphilic cationic species. The 12 emulsifiers showed the successful inhibition and killing of 8 bacterial and 2 fungal strains. The killing efficacy increased with increasing alkyl chain length. The octyl-functionalized compound was chosen for suspension polymerizations because of the good compromise between killing and emulsifying properties. With this emulsifier, aqueous poly(methacrylate) suspensions were prepared, which were stable and had excellent killing properties.

Structure-function relationships of nonviral gene vectors: Lessons from antimicrobial polymers

In recent years, substantial advances have been achieved in the design and synthesis of nonviral gene vectors. However, lack of effective and biocompatible vectors still remains a major challenge that hinders their application in clinical settings. In the past decade, there has been a rapid expansion of cationic antimicrobial polymers, due to their potent, rapid, and broad-spectrum biocidal activity against resistant microbes, and biocompatible features. Given that antimicrobial polymers share common features with nonviral gene vectors in various aspects, such as membrane affinity, functional groups, physicochemical characteristics, and unique macromolecular architectures, these polymers may provide us with inspirations to overcome challenges in the design of novel vectors toward more safe and efficient gene delivery in clinic. Building off these observations, we provide here an overview of the structure-function relationships of polymers for both antimicrobial applications and gene delivery by elaborating some key structural parameters, including functional groups, charge density, hydrophobic/hydrophilic balance, MW, and macromolecular architectures. By borrowing a leaf from antimicrobial agents, great advancement in the development of newer nonviral gene vectors with high transfection efficiency and biocompatibility will be more promising. STATEMENT OF SIGNIFICANCE: The development of gene delivery is still in the preclinical stage for the lack of effective and biocompatible vectors. Given that antimicrobial polymers share common features with gene vectors in various aspects, such as membrane affinity, functional groups, physicochemical characteristics, and unique macromolecular architectures, these polymers may provide us with inspirations to overcome challenges in the design of novel vectors toward more safe and efficient gene delivery in clinic. In this review, we systematically summarized the structure-function relationships of antimicrobial polymers and gene vectors, with which the design of more advanced nonviral gene vectors is anticipated to be further boosted in the future.

Exploring the Antimicrobial Action of Quaternary Amines against Acinetobacter baumannii

Quaternary amine compounds (QAC) are potent antimicrobials used to prevent the spread of pathogenic bacteria. While they are known for their membrane-damaging properties, QAC action has been suggested to extend beyond the surface to intracellular targets. Here we characterize the range of action of the QAC biocide benzalkonium chloride (BZK) against the bacterial pathogen Acinetobacter baumannii At high concentrations, BZK acts through membrane disruption, but at low concentrations we show that wide-spread protein aggregation is associated with BZK-induced cell death. Resistance to BZK is found to develop through ribosomal protein mutations that protect A. baumannii against BZK-induced protein aggregation. The multifunctional impact of BZK led us to discover that alternative QAC structures, with low human toxicity, retain potent action against multidrug-resistant A. baumannii, Staphylococcus aureus, and Clostridium difficile and present opportunities for their development as antibiotics.IMPORTANCE Quaternary amine compounds (QACs) are widely used to prevent the spread of bacterial pathogens, but our understanding of their mode of action is incomplete. Here we describe disruption of bacterial proteostasis as an unrecognized action of QAC antimicrobial action and uncover the potential of diverse QAC structures to act as multitarget antibiotics.