Using extracellular polymeric substances (EPS)-producing cyanobacteria for the bioremediation of heavy metals: do cations compete for the EPS functional groups and also accumulate inside the cell?

Stripped: contribution of cyanobacterial extracellular polymeric substances to the adsorption of rare earth elements from aqueous solutions

The transformation of modern industries towards enhanced sustainability is facilitated by green technologies that rely extensively on rare earth elements (REEs) such as cerium (Ce), neodymium (Nd), terbium (Tb), and lanthanum (La). The occurrence of productive mining sites, e.g., is limited, and production is often costly and environmentally harmful. As a consequence of increased utilization, REEs enter our ecosystem as industrial process water or wastewater and become highly diluted. Once diluted, they can hardly be recovered by conventional techniques, but using cyanobacterial biomass in a biosorption-based process is a promising eco-friendly approach. Cyanobacteria can produce extracellular polymeric substances (EPS) that show high affinity to metal cations. However, the adsorption of REEs by EPS has not been part of extensive research. Thus, we evaluated the role of EPS in the biosorption of Ce, Nd, Tb, and La for three terrestrial, heterocystous cyanobacterial strains. We cultivated them under N-limited and non-limited conditions and extracted their EPS for compositional analyses. Subsequently, we investigated the metal uptake of a) the extracted EPS, b) the biomass extracted from EPS, and c) the intact biomass with EPS by comparing the amount of sorbed REEs. Maximum adsorption capacities for the tested REEs of extracted EPS were 123.9-138.2 mg g-1 for Komarekiella sp. 89.12, 133.1-137.4 mg g-1 for Desmonostoc muscorum 90.03, and 103.5-129.3 mg g-1 for Nostoc sp. 20.02. A comparison of extracted biomass with intact biomass showed that 16% (Komarekiella sp. 89.12), 28% (Desmonostoc muscorum 90.03), and 41% (Nostoc sp. 20.02) of REE adsorption was due to the biosorption of the extracellular EPS. The glucose- rich EPS (15%-43% relative concentration) of all three strains grown under nitrogen-limited conditions showed significantly higher biosorption rates for all REEs. We also found a significantly higher maximum adsorption capacity of all REEs for the extracted EPS compared to cells without EPS and untreated biomass, highlighting the important role of the EPS as a binding site for REEs in the biosorption process. EPS from cyanobacteria could thus be used as efficient biosorbents in future applications for REE recycling, e.g., industrial process water and wastewater streams.

Metal tolerance and biosorption capacities of bacterial strains isolated from an urban watershed

Rapid industrialization and urbanization have led to widespread metal contamination in aquatic ecosystems. This study explores the metal tolerance and biosorption characteristics of four bacterial strains (Serratia sp. L2, Raoultella sp. L30, Klebsiella sp. R3, and Klebsiella sp. R19) isolated from Saint Clair River sediments. These strains effectively removed various metal cations (As3+, Pb2+, Cu2+, Mn2+, Zn2+, Cd2+, Cr6+, and Ni2+) in single and multi-metal solutions. Minimum inhibitory concentration (MIC) assays revealed strain-specific variations in metal tolerance, with L2 and L30 exhibiting higher tolerance. Surprisingly, R3 and R19, despite lower tolerance, demonstrated superior metal removal efficiency, challenging the notion that tolerance dictates removal efficacy. In single-metal solutions, R3 and R19 excelled at extracting various metal ions, while competitive binding in multi-metal solutions hindered removal. However, R3 and R19 retained higher removal efficiencies, possibly due to enhanced flocculation activities facilitating metal-ion contact. Comprehensive Fourier-transform infrared (FTIR) analysis highlighted the strains' metal-binding capabilities, with novel peaks emerging after metal exposure, indicative of extracellular polymeric substance (EPS) production. Scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) confirmed metal accumulation on bacterial surfaces and within cytoplasmic regions and revealed morphological changes and metal adsorption patterns, emphasizing the strains' ability to adapt to metal stress. Scanning transmission microscopy (STEM) and EDX analysis uncovered metal accumulation within bacterial cells, underscoring the complexity of microbial-metal interactions. This study also confirms that the simultaneous presence of an aqueous solution may cause a mutual inhibition in the adsorption of each metal to the EPS resulting in reduced metal uptake, which emphasizes the need to select specific bacterial strains for a given metal-containing effluent. The differences in metal distribution patterns between Klebsiella sp. R19 and Raoultella sp. L30 suggest species-specific metal accumulation strategies driven by environmental conditions and metal availability. The heavy metal-removing capabilities and the ability to grow over a wide range of metal concentrations of the strains used in this study may offer an advantage to employ these organisms for metal remediation in bioreactors or in situ.

Biofilm-Mediated Heavy Metal Removal from Aqueous System by Multi-Metal-Resistant Bacterial Strain Bacillus sp. GH-s29

Worldwide ever-augmenting urbanization, modernization, and industrialization have contributed to the release of pernicious compounds and a variety of pollutants into the environment. The pollutants discharged due to industrialization are of global concern. Industrial waste and effluent are comprised of hazardous organic and inorganic chemicals including heavy metals which pose a significant threat to the environment and may bring about numerous diseases or abnormalities in human beings. This brings on greater urgency for remediation of these polluted soil and water using sustainable approaches and mechanisms. In the present research, a multi-metal-resistant, gram-positive, non-virulent bacterial strain Bacillus sp. GH-s29 was isolated from contaminated groundwater of Bhojpur district, Bihar, India. The strain had the potential to develop a biofilm that was able to remediate different heavy metals [arsenic, cadmium, and chromium] from individual and multi-heavy metal solutions. Maximum removal for As (V), Cd (II), and Cr (VI) from individual-metal and the multi-metal solution was observed to be 73.65%, 57.37%, 61.62%, and 48.92%, 28.7%, and 35.46%, respectively. SEM-EDX analysis revealed the sequestration of multi-heavy metals by bacterial biofilm. Further characterization by FTIR analysis ensured that the presence of negatively charged functional groups on the biofilm-EPS such as hydroxyl, phosphate, sulfate, and carboxyl helps in binding to the positively charged metal ions. Thus, Bacillus sp. GH-s29 proved to be an effective and economical alternative for different heavy metal remediation from contaminated sites.

Impact of dehydration on the physiochemical properties of Nostoc calcicola BOT1 and its untargeted metabolic profiling through UHPLC-HRMS

The global population growth has led to a higher demand for food production, necessitating improvements in agricultural productivity. However, abiotic and biotic stresses pose significant challenges, reducing crop yields and impacting economic and social welfare. Drought, in particular, severely constrains agriculture, resulting in unproductive soil, reduced farmland, and jeopardized food security. Recently, the role of cyanobacteria from soil biocrusts in rehabilitating degraded land has gained attention due to their ability to enhance soil fertility and prevent erosion. The present study focused on Nostoc calcicola BOT1, an aquatic, diazotrophic cyanobacterial strain collected from an agricultural field at Banaras Hindu University, Varanasi, India. The aim was to investigate the effects of different dehydration treatments, specifically air drying (AD) and desiccator drying (DD) at various time intervals, on the physicochemical properties of N. calcicola BOT1. The impact of dehydration was assessed by analyzing the photosynthetic efficiency, pigments, biomolecules (carbohydrates, lipids, proteins, osmoprotectants), stress biomarkers, and non-enzymatic antioxidants. Furthermore, an analysis of the metabolic profiles of 96-hour DD and control mats was conducted using UHPLC-HRMS. Notably, there was a significant decrease in amino acid levels, while phenolic content, fatty acids, and lipids increased. These changes in metabolic activity during dehydration highlighted the presence of metabolite pools that contribute to the physiological and biochemical adjustments of N. calcicola BOT1, mitigating the impact of dehydration to some extent. Overall, present study demonstrated the accumulation of biochemical and non-enzymatic antioxidants in dehydrated mats, which could be utilized to stabilize unfavorable environmental conditions. Additionally, the strain N. calcicola BOT1 holds promise as a biofertilizer for semi-arid regions.

Interlink between ExoD (Alr2882), exopolysaccharide synthesis and metal tolerance in Nostoc sp. strain PCC 7120: Insight into its role, paralogs and evolution

Exopolysaccharides (EPS) produced by bacterial species are an important component of bacteria's survival strategy. Synthesis of EPS, principal component of extracellular polymeric substance, occurs through multiple pathways involving multitude of genes. While stress-induced concomitant increase in exoD transcript levels and EPS content have been shown earlier, experimental evidence for direct correlation is lacking. In the present study, role of ExoD in Nostoc sp. strain PCC 7120 was evaluated by generating a recombinant Nostoc strain AnexoD⁺, wherein the ExoD (Alr2882) protein was constitutively overexpressed. AnexoD⁺ exhibited higher EPS production, propensity for formation of biofilms and tolerance to Cd stress compared to vector control AnpAM cells. Both Alr2882 and its paralog All1787 exhibited 5 transmembrane domains, with only All1787 predicted to interact with several proteins in polysaccharide synthesis. Phylogenetic analysis of orthologs of these proteins across cyanobacteria indicated that the two paralogs Alr2882 and All1787 and their corresponding orthologs arose divergently during evolution, and could have distinct roles to perform in the biosynthesis of EPS. This study has thrown open the possibility of engineering overproduction of EPS and inducing biofilm formation through genetic manipulation of EPS biosynthesis genes in cyanobacteria, thus building a cost-effective green platform for large scale production of EPS.

Prospects of a hot spring-originated novel cyanobacterium, Scytonema ambikapurensis, for wastewater treatment and exopolysaccharide-enriched biomass production

The present work performs the polyphasic characterization of a novel cyanobacterial species Scytonema ambikapurensis isolated from an Indian hot spring and evaluates its wastewater bioremediation potential. While the physicochemical analyses of the wastewater indicated high load of nutrients and metals, the wastewater bioremediation experiment performed using the test cyanobacterium denoted the removal of 70 and 86% phosphate, 49 and 66% sulfate, 96 and 98% nitrate, 91 and 92% nitrite, 95 and 96% ammonia, 66 and 72% chloride, 79 and 81% zinc, 68 and 80% nickel, 81 and 90% calcium, and 80 and 90% potassium from the autoclaved and un-autoclaved wastewater, respectively, after 20 days of culturing. The kinetics study of zinc and nickel removal from wastewater revealed that the cyanobacterium employed sequential biosorption (by following pseudo-second-order kinetics model) and bioaccumulation methods to remove these two metals. The quality of the autoclaved and un-autoclaved wastewater was further improved by the cyanobacterium through reduction of hardness by 74 and 81%, respectively. In wastewater, the cyanobacterium not only enhanced its biomass, chlorophyll and carbohydrate contents, but also produced small amount of released and high capsular exopolysaccharide (EPS). The FTIR and TGA analyses of capsular EPS unraveled that it was a negatively charged sulfated biomolecule having thermostability up to 240 °C, which suggested its possible use as excellent emulsifying, viscosifying, and biosorption agent. The credibility of this EPS as biosorption agent was ascertained by evaluating its metal chelating ability. Finally, the experimental data denoting the ability of S. ambikapurensis to bioremediate wastewater and simultaneously produce EPS was statistically validated by PCA1-pollutant removal model and the PCA2-cellular constituent model, respectively. Briefly, the study discloses that the cyanobacterium has huge biotechnological and industrial importance as it bioremediates wastewater and simultaneously produces thermostable exopolysaccharide.

Mucus increases cell iron uptake to impact the release of pro-inflammatory mediators after particle exposure

We tested the hypothesis that (1) mucus production can be included in the cell response to iron deficiency; (2) mucus binds iron and increases cell metal uptake; and subsequently (3) mucus impacts the inflammatory response to particle exposure. Using quantitative PCR, RNA for both MUC5B and MUC5AC in normal human bronchial epithelial (NHBE) cells decreased following exposures to ferric ammonium citrate (FAC). Incubation of mucus-containing material collected from the apical surface of NHBE cells grown at air-liquid interface (NHBE-MUC) and a commercially available mucin from porcine stomach (PORC-MUC) with iron demonstrated an in vitro capacity to bind metal. Inclusion of either NHBE-MUC or PORC-MUC in incubations of both BEAS-2B cells and THP1 cells increased iron uptake. Exposure to sugar acids (N-acetyl neuraminic acid, sodium alginate, sodium guluronate, and sodium hyaluronate) similarly increased cell iron uptake. Finally, increased metal transport associated with mucus was associated with a decreased release of interleukin-6 and -8, an anti-inflammatory effect, following silica exposure. We conclude that mucus production can be involved in the response to a functional iron deficiency following particle exposure and mucus can bind metal, increase cell uptake to subsequently diminish or reverse a functional iron deficiency and inflammatory response following particle exposure.

Characterization of bioemulsifying EPS from Halobacillus trueperi MXM-16, a halophilic adhered bacterial isolate from the mangrove ecosystem

Exopolymeric substances (EPS) produced by bacterial cells play a crucial role in the interaction of the cells with the surrounding environment. Halobacillus trueperi manxer mangrove-16, an adhered bacterial isolate from the mangrove ecosystem was found to produce EPS that was observed by Alcian blue staining and congo red-coomassie blue agar. The EPS of the bacterial isolate exhibited emulsifying properties. Purification of the EPS by dialysis showed an emulsification index of 80% with hexadecane. Qualitative analysis and Fourier's Infrared spectroscopy (FTIR) revealed that the EPS was a glycoprotein in nature. The EPS showed no surface-active properties. Further exploration of the potential of the EPS interaction with metal solutions showed the ability of the bioemulsifier to cause precipitation in the metal solutions and particularly change the color of the Chromium (VI) solution. The scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDS) of the cells and EPS particularly indicated the interaction of the EPS with the (Fe⁰ ) zerovalent iron nanoparticles and its effect on the cells and EPS of the bacteria. It is therefore concluded that the EPS is a crucial component that anchors the bacteria to particulate matter in the mangrove ecosystem and also plays an important role in interaction with metals and hydrocarbons.

Interrelating EPS, soluble microbial products and metal solubility in a methanogenic consortium stressed by nickel and cobalt

The relationships between extracellular polymeric substances (EPS), soluble microbial product production, metal solubility, and methanogenic activity were investigated. The individual, and joint, toxic effects of nickel and cobalt on methanogenic consortia fed with glucose as model substrate were studied using biomethane potential assays. Cobalt was found to be less toxic to methanogens than nickel at each concentration tested, and the combined effects of Ni and Co on methane production in the bimetal experiment was higher than the sum of the effects of each metal alone. The protein content of EPS, and extracellular soluble protein fractions, decreased with increasing concentrations of total metals. Meanwhile, no significant change in response to metal stress was apparent for carbohydrate content of EPS or extracellular soluble carbohydrate. Decreasing protein content of EPS was accompanied by reduced methanogenic activity and an increase in the soluble metal fraction. The strong associations observed between these variables could be due to the critical role of EPS in protecting microbial cells against nickel and cobalt stress, possibly by capturing metal cations through their functional groups, thus reducing metal availability to the microbial cells in the methanogenic consortia underpinning the anaerobic digestion process.

Microbialites show a distinct cyanobacterial phylogenetic structure and functional redundancy in Bacalar lagoon and Cenote Azul sinkhole, Yucatan peninsula, Mexico

Cyanobacterial components of microbialites from two geographically close systems, the Bacalar lagoon (BL) and the Cenote Azul sinkhole (CA) in Quintana Roo, Mexico, were characterized. BL and CA systems were studied along a longitudinal gradient (north to south) and a depth gradient (5 to 30 m), respectively. Microscopic observations, 16S rRNA amplicon sequencing, and shotgun metagenomics were used to characterize Cyanobacteria. Both systems showed similar metabolic/functional profiles but harbored completely different cyanobacterial taxa. BL was dominated by Nostocales, including a population of previously undescribed Chakia sp., while CA was dominated by an unknown taxon of Chroococcales, comprising 70% of relative abundance through all depths. Interestingly, cyanobacterial assemblages in microbialites exhibited phylogenetic overdispersion in most of the BL sites, while CA sites exhibited phylogenetic clustering, these differences were attributed to depth/light conditions and possibly different times of geological formation for BL and CA systems.

Metal removal capability of two cyanobacterial species in autotrophic and mixotrophic mode of nutrition

Background

Cyanobacteria are ecologically significant prokaryotes that can be found in heavy metals contaminated environments. As their photosynthetic machinery imposes high demands for metals, homeostasis of these micronutrients has been extensively considered in cyanobacteria. Recently, most studies have been focused on different habitats using microalgae leads to a remarkable reduction of an array of organic and inorganic nutrients, but what takes place in the extracellular environment when cells are exposed to external supplementation with heavy metals remains largely unknown.

Methods

Here, extracellular polymeric substances (EPS) production in strains Nostoc sp. N27P72 and Nostoc sp. FB71 was isolated from different habitats and thenthe results were compared and reported.

Result

Cultures of both strains, supplemented separately with either glucose, sucrose, lactose, or maltose showed that production of EPS and cell dry weight were boosted by maltose supplementation. The production of EPS (9.1 ± 0.05 μg/ml) and increase in cell dry weight (1.01 ± 0.06 g/l) were comparatively high in Nostoc sp. N27P72 which was isolated from lime stones.The cultures were evaluated for their ability to remove Cu (II), Cr (III), and Ni (II) in culture media with and without maltose. The crude EPS showed metal adsorption capacity assuming the order Ni (II) > Cu (II) > Cr (III) from the metal-binding experiments.Nickel was preferentially biosorbed with a maximal uptake of 188.8 ± 0.14 mg (g cell dry wt) ⁻¹ crude EPS. We found that using maltose as a carbon source can increase the production of EPS, protein, and carbohydrates content and it could be a significant reason for the high ability of metal absorbance. FT-IR spectroscopy revealed that the treatment with Ni can change the functional groups and glycoside linkages in both strains. Results of Gas Chromatography-Mass Spectrometry (GC–MS) were used to determine the biochemical composition of Nostoc sp. N27P72, showed that strong Ni (II) removal capability could be associated with the high silicon containing heterocyclic compound and aromatic diacid compounds content.

Conclusion

The results of this studyindicatede that strains Nostoc sp. N27P72 can be a good candidate for the commercial production of EPS and might be utilized in bioremediation field as an alternative to synthetic and abiotic flocculants.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12866-022-02471-8.

Mixotrophic conditions can be used to optimize the biosorption controllable factors for the maximum metal removal efficiency.

Different habitats (lime stones of Khuzestan province and fresh water of of Golestan province) can effect the uptake of heavy metal by two Nostoc species (Nostoc sp. N27P72 and Nostoc sp. FB71).

Modification of culture media can maximize the uptake capacity of the heavy metal ions by two Nostoc species.

Genomic and proteomic insights into the heavy metal bioremediation by cyanobacteria

Heavy metals (HMs) pose a global ecological threat due to their toxic effects on aquatic and terrestrial life. Effective remediation of HMs from the environment can help to restore soil's fertility and ecological vigor, one of the key Sustainable Development Goals (SDG) set by the United Nations. The cyanobacteria have emerged as a potential option for bioremediation of HMs due to their unique adaptations and robust metabolic machineries. Generally, cyanobacteria deploy multifarious mechanisms such as biosorption, bioaccumulation, activation of metal transporters, biotransformation and induction of detoxifying enzymes to sequester and minimize the toxic effects of heavy metals. Therefore, understanding the physiological responses and regulation of adaptation mechanisms at molecular level is necessary to unravel the candidate genes and proteins which can be manipulated to improve the bioremediation efficiency of cyanobacteria. Chaperons, cellular metabolites (extracellular polymers, biosurfactants), transcriptional regulators, metal transporters, phytochelatins and metallothioneins are some of the potential targets for strain engineering. In the present review, we have discussed the potential of cyanobacteria for HM bioremediation and provided a deeper insight into their genomic and proteomic regulation of various tolerance mechanisms. These approaches might pave new possibilities of implementing genetic engineering strategies for improving bioremediation efficiency with a future perspective.

Cigarette Smoke Particle-Induced Lung Injury and Iron Homeostasis

It is proposed that the mechanistic basis for non-neoplastic lung injury with cigarette smoking is a disruption of iron homeostasis in cells after exposure to cigarette smoke particle (CSP). Following the complexation and sequestration of intracellular iron by CSP, the host response (eg, inflammation, mucus production, and fibrosis) attempts to reverse a functional metal deficiency. Clinical manifestations of this response can present as respiratory bronchiolitis, desquamative interstitial pneumonitis, pulmonary Langerhans’ cell histiocytosis, asthma, pulmonary hypertension, chronic bronchitis, and pulmonary fibrosis. If the response is unsuccessful, the functional deficiency of iron progresses to irreversible cell death evident in emphysema and bronchiectasis. The subsequent clinical and pathological presentation is a continuum of lung injuries, which overlap and coexist with one another. Designating these non-neoplastic lung injuries after smoking as distinct disease processes fails to recognize shared relationships to each other and ultimately to CSP, as well as the common mechanistic pathway (ie, disruption of iron homeostasis).

Formation of silver nanoparticles in aquatic environments facilitated by algal extracellular polymeric substances: Importance of chloride ions and light

Natural conversion of metal species is an important source for nanoscale metal particles in the aquatic environment, and it could affect their fate and toxicity. Extracellular polymeric substances (EPSs) are ubiquitous and abundant in the aquatic environment, thus likely can reduce metal ions to nanoscale particles. However, the effect of natural inorganic ligand and light on this process has not been well investigated. In this work, Ag⁺ was readily reduced to silver nanoparticles (AgNPs, around 15 nm in size) by the EPS collected from Chlorella pyrenoidosa. AgNPs could be generated in the dark environment but at a slow rate. Visible light accelerated the photoreduction. The reaction mechanism probed by Fourier transform infrared spectroscopy and three-dimensional excitation-emission matrix spectrometry demonstrated that the reduction in Ag⁺ was attributed to the protein and polysaccharides in the EPS. The presence of chloride ions (Cl^-) largely shortened the duration of photoreduction. Scanning electron microscopy results indicated that with the aid of EPS, the AgCl nanocrystal was converted to core-shell structure, with dot-like nano Ag acting as the shell and the AgCl nanocrystal acting as the core. Size and morphological changes were observed on transmission electron microscopy. This study adds new knowledge of the joint effect of light exposure, Cl^-, and EPS on the formation of AgNPs from Ag⁺ and advances the understanding of the natural formation mechanism of AgNPs.

Multifaceted roles of microalgae in the application of wastewater biotreatment: A review

Microalgae have become imperative for biological wastewater treatment. Its capability in biological purification of wastewaters from different origins while utilizing wastewater as the substrate for growth has manifest great potentials as a sustainable and economical wastewater treatment method. The wastewater grown microalgae have also been remarked in research to be a significant source of value-added bioproducts and biomaterial. This paper highlights the multifaceted roles of microalgae in wastewater treatment from the extent of microalgal bioremediation function to environmental amelioration with the involvement of microalgal biomass productivity and carbon dioxide fixation. Besides, the uptake mechanism of microalgae in wastewater treatment was discussed in detail with illustrations for a comprehensive understanding of the removal process of undesirable substances. The performance of different microalgae species in the uptake of various substances was studied and summarized in this review. The correlation of microalgal treatment efficacy with various algal strain types and the bioreactors harnessed for cultivation systems was also discussed. Studies on the alternatives to conventional wastewater treatment processes and the integration of microalgae with accordant wastewater treatment methods are presented. Current research on the biological and technical approaches for the modification of algae-based wastewater system and the maximization of biomass production is also reviewed and discussed. The last portion of the review is dedicated to the assertion of challenges and future perspectives on the development of microalgae-based wastewater treatment technology. This review serves as a useful and informative reference for readers regarding the multifaceted roles of microalgae in the application of wastewater biotreatment with detailed discussion on the uptake mechanism.

Biochemical characterization of Nostoc sp. exopolysaccharides and evaluation of potential use in wound healing

Exopolysaccharides (EPS) produced by cyanobacteria are complex biomolecules of anionic nature with potential biomedical applications. In this study, the EPS produced by the Nostoc sp. strains PCC7936 and PCC7413 were characterized and evaluated as a biomaterial for new wound dressings. The addition of acetate ions to the culture medium slightly stimulated EPS production, achieving 1463.1 ± 16.0 mgL^-1 (PCC7413) and 1372.1 ± 29.0 mgL^-1 (PCC7936). Both EPS presented nine monosaccharide residues and a MW > 1000 kDa. The acetate addition changed the monosaccharide molar percentages. FTIR and DLS results confirmed the anionic nature and the presence of sulfate groups in both EPS, which are determinant features for biomedical applications. Both EPS at 1%(w/v) formed gels in the presence of 0.4%(w/v) FeCl₃. Results obtained for MTT assay and wound healing in vitro scratch assay revealed hydrogels biocompatibility and ability to promote fibroblast migration and proliferation that was greater in PCC7936. The Nostoc EPS hydrogels presented promising properties to be applied in the treatment of skin injuries.

Mitigation of zinc toxicity through differential strategies in two species of the cyanobacterium Anabaena isolated from zinc polluted paddy field

The present study describes the physiological and biochemical mechanisms of zinc tolerance in two heterocytous cyanobacteria i.e. Anabaena doliolum and Anabaena oryzae, treated with their respective LC₅₀ concentrations of zinc (3 and 4.5 mg L^-1) for eight days. The feedbacks were examined in terms of growth, metabolism, zinc exclusion, zinc accumulation, oxidative stress, antioxidants and metallothionein contents. Although the growth and metabolic activities were reduced in both the cyanobacterium, maximum adversity was noticed in A. doliolum. The higher order of abnormalities in A. doliolum was attributed to excessive accumulation of zinc and enhanced reactive oxygen species (ROS) production. However, the comparatively higher growth and metabolic activities of A. oryzae were ascribed to the lower accumulation of zinc as a result of released polysaccharides mediated zinc exclusion, synthesis of zinc chelating metallothioneins and subsequent less production of ROS. The oxidative stress and macromolecular damages were prominent in both the cyanobacterium but the condition was much harsher in A. doliolum which may be explained by its comparatively low antioxidative enzyme activities (SOD, APX and GR) and smaller amount of ascorbate-glutathione-tocopherol contents than that of A. oryzae. However, sustenance of 50% growth by A. doliolum under zinc stress despite severe cellular damages was attributed to the enhanced synthesis of phenolics, flavonoids, and proline. Thus, differential zinc tolerance in A. doliolum and A. oryzae is possibly the outcome of their distinct mitigation strategies. Although the two test organisms followed pseudo second order kinetics model during zinc biosorption yet they exhibited differential zinc biosorption capacity. The cyanobacterium A. oryzae was found to be more efficient in removing zinc as compared to A. doliolum and this efficiency makes A. oryzae a promising candidate for the phycoremediation of zinc polluted environments.

Microalgal-based biopolymer for nano- and microplastic removal: a possible biosolution for wastewater treatment

The increasing water pollution caused by the presence of nano- and microplastics has shown a need to pursue solutions to remediate this problem. In this work, an extracellular polymeric substance (EPS) producing freshwater Cyanothece sp. strain was exposed to nano- and microplastics. The bioflocculant capacity of the biopolymer produced was evaluated. The influence of different concentrations (1 and 10 mg L^-1) of polystyrene nano- and microplastics in the extracellular carbohydrates and in the EPS production was studied. The presence of nano- and microplastics induced a negative effect on the microalgal growth (of up to 47%). The results show that the EPS produced by Cyanothece sp. exhibits high bioflocculant activity in low concentrations. Also, the EPS displayed very favourable characteristics for aggregation, as the aggregates were confirmed to consist of microalga, EPS and both the nano- and microplastics. These results highlight the potential of the microalgal-based biopolymers to replace hazardous synthetic flocculants used in wastewater treatment, while aggregating and flocculating nano- and microplastics, demonstrating to be a multi-purposed, compelling, biocompatible solution to nano- and microplastic pollution.

Anti-Inflammatory Activity of Exopolysaccharides from Phormidium sp. ETS05, the Most Abundant Cyanobacterium of the Therapeutic Euganean Thermal Muds, Using the Zebrafish Model

The Euganean Thermal District (Italy) represents the oldest and largest thermal center in Europe, and its therapeutic mud is considered a unique product whose beneficial effects have been documented since Ancient Roman times. Mud properties depend on the heat and electrolytes of the thermal water, as well as on the bioactive molecules produced by its biotic component, mainly represented by cyanobacteria. The investigation of the healing effects of compounds produced by the Euganean cyanobacteria represents an important goal for scientific validation of Euganean mud therapies and for the discovering of new health beneficial biomolecules. In this work, we evaluated the therapeutic potential of exopolysaccharides (EPS) produced by Phormidium sp. ETS05, the most abundant cyanobacterium of the Euganean mud. Specifically, Phormidium EPS resulted in exerting anti-inflammatory and pro-resolution activities in chemical and injury-induced zebrafish inflammation models as demonstrated using specific transgenic zebrafish lines and morphometric and expression analyses. Moreover, in vivo and in vitro tests showed no toxicity at all for the EPS concentrations tested. The results suggest that these EPS, with their combined anti-inflammatory and pro-resolution activities, could be one of the most important therapeutic molecules present in the Euganean mud and confirm the potential of these treatments for chronic inflammatory disease recovery.

Bioproduct Potential of Outdoor Cultures of Tolypothrix sp.: Effect of Carbon Dioxide and Metal-Rich Wastewater

Rising CO2 levels, associated climatic instability, freshwater scarcity and diminishing arable land exacerbate the challenge to maintain food security for the fast growing human population. Although coal-fired power plants generate large amounts of CO2 emissions and wastewater, containing environmentally unsafe concentrations of metals, they ensure energy security. Nitrogen (N2)-fixation by cyanobacteria eliminate nitrogen fertilization costs, making them promising candidates for remediation of waste CO2 and metals from macronutrient-poor ash dam water and the biomass is suitable for phycocyanin and biofertilizer product development. Here, the effects of CO2 and metal mixtures on growth, bioproduct and metal removal potential were investigated for the self-flocculating, N2-fixing freshwater cyanobacterium Tolypothrix sp. Tolypothrix sp. was grown outdoors in simulated ash dam wastewater (SADW) in 500 L vertical bag suspension cultures and as biofilms in modified algal-turf scrubbers. The cultivation systems were aerated with air containing either 15% CO2 (v/v) or not. CO2-fertilization resulted in ∼1.25- and 1.45-fold higher biomass productivities and ∼40 and 27% increased phycocyanin and phycoerythrin contents for biofilm and suspension cultures, respectively. CO2 had no effect on removal of Al, As, Cu, Fe, Sr, and Zn, while Mo removal increased by 37% in both systems. In contrast, Ni removal was reduced in biofilm systems, while Se removal increased by 73% in suspension cultures. Based on biomass yields and biochemical data obtained, net present value (NPV) and sensitivities analyses used four bioproduct scenarios: (1) phycocyanin sole product, (2) biofertilizer sole product, (3) 50% phycocyanin and 50% biofertilizer, and (4) 100% phycocyanin and 100% biofertilizer (residual biomass) for power station co-located and not co-located 10 ha facilities over a 20-year period. Economic feasibility for the production of food-grade phycocyanin either as a sole product or with co-production of biofertilizer was demonstrated for CO2-enriched vertical and raceway suspension cultures raised without nitrogen-fertilization and co-location with power stations significantly increased profit margins.

Strategies to Obtain Designer Polymers Based on Cyanobacterial Extracellular Polymeric Substances (EPS)

Biopolymers derived from polysaccharides are a sustainable and environmentally friendly alternative to the synthetic counterparts available in the market. Due to their distinctive properties, the cyanobacterial extracellular polymeric substances (EPS), mainly composed of heteropolysaccharides, emerge as a valid alternative to address several biotechnological and biomedical challenges. Nevertheless, biotechnological/biomedical applications based on cyanobacterial EPS have only recently started to emerge. For the successful exploitation of cyanobacterial EPS, it is important to strategically design the polymers, either by genetic engineering of the producing strains or by chemical modification of the polymers. This requires a better understanding of the EPS biosynthetic pathways and their relationship with central metabolism, as well as to exploit the available polymer functionalization chemistries. Considering all this, we provide an overview of the characteristics and biological activities of cyanobacterial EPS, discuss the challenges and opportunities to improve the amount and/or characteristics of the polymers, and report the most relevant advances on the use of cyanobacterial EPS as scaffolds, coatings, and vehicles for drug delivery.

Physiological and thylakoid ultrastructural changes in cyanobacteria in response to toxic manganese concentrations

In this study, two cyanobacterial strains (morphologically identified as Microcystis novacekii BA005 and Nostoc paludosum BA033) were exposed to different Mn concentrations: 7.0, 10.5, 15.7, 23.6 and 35.4 mg L^-1 for BA005; and 15.0, 22.5, 33.7, 50.6, and 76.0 mg L^-1 for BA033. Manganese toxicity was assessed by growth rate inhibition (EC₅₀), chlorophyll a content, quantification of Mn accumulation in biomass and monitoring morphological and ultrastructural effects. The Mn EC₅₀ values were 16 mg L^-1 for BA005 and 39 mg L^-1 for BA033, respectively. Reduction of chlorophyll a contents and ultrastructural changes were observed in cells exposed to Mn concentrations greater than 23.6 and 33.7 mg L^-1 for BA005 and BA033. Damage to intrathylakoid spaces, increased amounts of polyphosphate granules and an increased number of carboxysomes were observed in both strains. In the context of the potential application of these strains in bioremediation approaches, BA005 was able to remove Mn almost completely from aqueous medium after 96 h exposure to an initial concentration of 10.5 mg L^-1, and BA033 was capable of removing 38% when exposed to initial Mn concentration of 22.5 mg L^-1. Our data shed light on how these cyanobacterial strains respond to Mn stress, as well as supporting their utility as organisms for monitoring Mn toxicity in industrial wastes and potential bioremediation application.

Sources, Extraction and Biomedical Properties of Polysaccharides

In the recent era, bioactive compounds from plants have received great attention because of their vital health-related activities, such as antimicrobial activity, antioxidant activity, anticoagulant activity, anti-diabetic activity, UV protection, antiviral activity, hypoglycemia, etc. Previous studies have already shown that polysaccharides found in plants are not likely to be toxic. Based on these inspirational comments, most research focused on the isolation, identification, and bioactivities of polysaccharides. A large number of biologically active polysaccharides have been isolated with varying structural and biological activities. In this review, a comprehensive summary is provided of the recent developments in the physical and chemical properties as well as biological activities of polysaccharides from a number of important natural sources, such as wheat bran, orange peel, barely, fungi, algae, lichen, etc. This review also focused on biomedical applications of polysaccharides. The contents presented in this review will be useful as a reference for future research as well as for the extraction and application of these bioactive polysaccharides as a therapeutic agent.

Taxonomic resolution of the genus Cyanothece (Chroococcales, Cyanobacteria), with a treatment on Gloeothece and three new genera, Crocosphaera, Rippkaea, and Zehria

The systematics of single-celled cyanobacteria represents a major challenge due to morphological convergence and application of various taxonomic concepts. The genus Cyanothece is one of the most problematic cases, as the name has been applied to oval-shaped coccoid cyanobacteria lacking sheaths with little regard to their phylogenetic position and details of morphology and ultrastructure. Hereby we analyze an extensive set of complementary genetic and phenotypic evidence to disentangle the relationships among these cyanobacteria. We provide diagnostic characters to separate the known genera Cyanothece, Gloeothece, and Aphanothece, and provide a valid description for Crocosphaera gen. nov. We describe two new genera, Rippkaea and Zehria, to characterize two distinct phylogenetic lineages outside the previously known genera. We further describe 13 new species in total including Cyanothece svehlovae, Gloeothece aequatorialis, G. aurea, G. bryophila, G. citriformis, G. reniformis, Gloeothece tonkinensis, G. verrucosa, Crocosphaera watsonii, C. subtropica, C. chwakensis, Rippkaea orientalis, and Zehria floridana to recognize the intrageneric diversity as rendered by polyphasic analysis. We discuss the close relationship of free-living cyanobacteria from the Crocosphaera lineage to nitrogen-fixing endosymbionts of marine algae. The current study includes several experimental strains (Crocosphaera and "Cyanothece") important for the study of diazotrophy and the global oceanic nitrogen cycle, and provides evidence suggesting ancestral N₂ -fixing capability in the chroococcalean lineage.

Halomonas Rhizobacteria of Avicennia marina of Indian Sundarbans Promote Rice Growth Under Saline and Heavy Metal Stresses Through Exopolysaccharide Production

The Halomonas species isolated from the rhizosphere of the true mangrove Avicennia marina of Indian Sundarbans showed enhanced rice growth promotion under combined stress of salt and arsenic in pot assay. Interestingly, under abiotic stress conditions, Halomonas sp. Exo1 was observed as an efficient producer of exopolysaccharide. The study revealed that salt triggered exopolysaccharide production, which in turn, increased osmotic tolerance of the strain. Again, like salt, presence of arsenic also caused increased exopolysaccharide production that in turn sequestered arsenic showing a positive feedback mechanism. To understand the role of exopolysaccharide in salt and arsenic biosorption, purified exopolysaccharide mediated salt and arsenic sequestration were studied both under in vivo and in vitro conditions and the substrate binding properties were characterized through FT-IR and SEM-EDX analyses. Finally, observation of enhanced plant growth in pot assay in the presence of the strain and pure exopolysaccharide separately, confirmed direct role of exopolysaccharide in plant growth promotion.

Alterations in the proteomic composition of Serratia marcescens in response to manganese (II)

Background

Proteomics is an important tool for the investigation of dynamic physiological responses of microbes under heavy metal stress. To gain insight into how bacteria respond to manganese (II) and identify the proteins involved in Mn (II) oxidation, the shotgun proteomics approach was applied to a potential Mn (II)-oxidizing Serratia marcescens strain cultivated in the absence and presence of Mn (II).

Results

The LG1 strain, which grew equally well in the two conditions, was found to express a set of proteins related to cellular processes vital for survival, as well as proteins involved in adaptation and tolerance to Mn (II). The multicopper oxidase CueO was identified, indicating its probable participation in the Mn (II) bio-oxidation; however, its expression was not modulated by the presence of Mn (II). A set of proteins related to cell and metabolic processes vital to the cells were downregulated in the presence of Mn (II), while cell membrane-related proteins involved in the maintenance of cell integrity and survival under stress were upregulated under this condition.

Conclusions

These findings indicate that the LG1 strain may be applied successfully in the bioremediation of Mn (II), and the shotgun approach provides an efficient means for obtaining the total proteome of this species.

Effects of Phosphorus in Growth Media on Biomineralization and Cell Surface Properties of Marine Cyanobacteria Synechococcus

Through geological time, cyanobacterial picoplankton have impacted the global carbon cycle by sequestrating CO2 and forming authigenic carbonate minerals. Various studies have emphasized the cyanobacterial cell envelopes as nucleation sites for calcium carbonate formation. Little is known, however, about how environmental conditions (e.g., nutrient content) trigger a cell surface and its properties and, consequently, influence biomineralization. Our study aims to understand how phosphorus (P) concentration impacts the properties of cell surfaces and cell–mineral interactions. Changes to the surface properties of marine Synechococcus strains grown under various P conditions were characterized by potentiometric titrations, X-ray photoelectron spectroscopy (XPS), and tip-enhanced Raman spectroscopy (TERS). Biomineralization experiments were performed using cyanobacterial cells, which were grown under different P concentrations and exposed to solutions slightly oversaturated with respect to calcium carbonate. We observed the changes induced by different P conditions in the macromolecular composition of the cyanobacteria cell envelope and its consequences for biomineralization. The modified properties of cell surfaces were linked to carbonate precipitation rates and mineral morphology from biomineralization experiments. Our analysis shows that the increase of phosphoryl groups and surface charge, as well as the relative proportion of polysaccharides and proteins, can impact carbonate precipitation by picocyanobacteria.

Morphophysiological and transcriptome analysis reveals a multiline defense system enabling cyanobacterium Leptolyngbya strain JSC-1 to withstand iron induced oxidative stress

Iron intoxications induce severe oxidative stress by producing reactive oxygen species (ROS) in cyanobacteria, leading to membrane lipid peroxidation, altered morphology, impaired photosynthesis and other oxidative stress injuries. Given these stresses, mitigation of ROS is a prerequisite for all aerobic organisms. Study of siderophilic cyanobacterium Leptolyngbya strain JSC-1 inhabiting iron-rich hot springs may provide insight into the mechanism of iron homeostasis and alleviation of oxidative stress. In this study, we investigated the morphophysiological and molecular mechanisms enabling this cyanobacterium to cope with iron-induced oxidative stress. Strain JSC-1 biomineralized extracellular iron via an exopolymeric sheath (acting as a first line of defense) and intracellular iron via polyphosphate inclusions (second line of defense), thus minimizing the burden of free ferric ions. Physiological parameters, SOD, CAT and POD activities, bacterioferritin and total protein contents fluctuated in response to iron elevation, displaying a third line of defense to mitigate ROS. Differential gene expression analysis of JSC-1 indicated up-regulation of 94 and 125 genes and down-regulation of 89 and 183 genes at low (4 μM) and high (400 μM) iron concentration, respectively. The differentially expressed genes (DEGs) were enriched in 100 KEGG pathways and were found to be involved in lipopolysaccharide and fatty acid biosynthesis, starch, sucrose, chlorophyll and other metabolic pathways. Together with metabolic reprogramming (fourth line of defense), JSC-1 established a unique multiline defense system that allows JSC-1 to withstand severe oxidative stress. These findings also provide insight into potential survival strategies of ancient microorganisms inhabiting similar environment present in early earth history.

High pCO2-induced exopolysaccharide-rich ballasted aggregates of planktonic cyanobacteria could explain Paleoproterozoic carbon burial

The contribution of planktonic cyanobacteria to burial of organic carbon in deep-sea sediments before the emergence of eukaryotic predators ~1.5 Ga has been considered negligible owing to the slow sinking speed of their small cells. However, global, highly positive excursion in carbon isotope values of inorganic carbonates ~2.22-2.06 Ga implies massive organic matter burial that had to be linked to oceanic cyanobacteria. Here to elucidate that link, we experiment with unicellular planktonic cyanobacteria acclimated to high partial CO2 pressure (pCO2) representative of the early Paleoproterozoic. We find that high pCO2 boosts generation of acidic extracellular polysaccharides (EPS) that adsorb Ca and Mg cations, support mineralization, and aggregate cells to form ballasted particles. The down flux of such self-assembled cyanobacterial aggregates would decouple the oxygenic photosynthesis from oxidative respiration at the ocean scale, drive export of organic matter from surface to deep ocean and sustain oxygenation of the planetary surface.

Effects of Pb Smelting on the Soil Bacterial Community near a Secondary Lead Plant

Secondary lead smelting is a widespread industrial activity which has exacerbated Pb or Cd contamination of soil and water across the world. Soil physicochemical properties, soil enzyme activities, heavy metal concentrations, and bacterial diversity near a secondary lead plant in Xuzhou, China were examined in this study. The results showed that secondary lead smelting activities influenced nearby soils. Soil acidification decreased one order of magnitude, with a mean value of 7.3. Soil organic matter also showed a downward trend, while potassium and nitrogen appeared to accumulate. Soil urease and protease activity increased in samples with greater heavy metal pollution, but overall the soil microbial biodiversity decreased. Soil heavy metal concentration-especially Pb and Cd-greatly exceeded the concentrations of Chinese Environmental Quality Standard for Soils (GB 15618-1995). Some environmental factors-such as pH, organic matter, enzyme activity, and the concentration of heavy metals-significantly affected bacterial diversity: compared with the control site, the Chao1 estimator decreased about 50%, while the Shannon diversity index dropped approximately 20%. Moreover, some genera have significant relationships with heavy metal concentration-such as Ramlibacter with Zn and Steroidobacter with Cd-which might act as bio-indicators for soil remediation. These results will provide a new insight in the future for reclaiming soil contaminants caused by secondary lead smelting.

Heavy Metal Stress and Its Consequences on Exopolysaccharide (EPS)-Producing Pantoea agglomerans

Currently, the heavy metal pollution is of grave concern, and the part of microorganism for metal bioremediation should take into account as an efficient and economic strategy. On this framework, the heavy metal stress consequences on exopolysaccharide (EPS)-producing agricultural isolate, Pantoea agglomerans, were studied. The EPS production is a protective response to stress to survive and grow in the metal-contaminated environment. P. agglomerans show tolerance and mucoid growth in the presence of heavy metals, i.e., mercury, copper, silver, arsenic, lead, chromium, and cadmium. EDX first confirmed the metal accumulation and further, FTIR determined the functional groups involved in metal binding. The ICP-AES identified the location of cell-bound and intracellular metal accumulation. Metal deposition on cell surface has released more Ca²⁺. The effect on bacterial morphology investigated with SEM and TEM revealed the sites of metal accumulation, as well as possible structural changes. Each heavy metal caused distinct change and accumulated on cell-bound EPS with some intracellular deposits. The metal stress caused a decrease in total protein content and increased in total carbohydrate with a boost in EPS. Thus, the performance of P. agglomerans under metal stress indicated a potential candidate for metal bioremediation. Graphical Abstract ᅟ.

In vivo exposure of the marine sponge Chondrilla nucula Schmidt, 1862 to cadmium (Cd), copper (Cu) and lead (Pb) and its potential use for bioremediation purposes

The study aimed to test the cadmium (Cd), copper (Cu) and lead (Pb) bioaccumulation capacity of the marine sponge Chondrilla nucula and to measure the expression of metallothioneins (MTs) by a western blotting assay to explore metal tolerance and its potential use as a bioremediator in contaminated coastal areas. C. nucula was sampled in a protected marine area in order to perform experiments on organisms living in a healthy environment. Under laboratory conditions, the sponges were exposed to increasing concentrations of Cd, Cu and Pb in tanks filled with artificial seawater set up for the experiments. For each metal, three waterborne concentrations (mgL^-1) of Cd (0.02-0.04-0.08), Cu (0.1-0.2-0.4) and Pb (0.2-0.4-0.8) were considered separately. SPSS 20.0 was used for statistical analysis. Significant differences in bioaccumulation across levels of each metal were highlighted. Moreover, the amount accumulated in sponges increased proportionately with increasing levels of exposure for each metal as well as MT expression after Cd and Pb exposure. The results demonstrate the efficiency of C. nucula in accumulating high levels of Cu, but a low tolerance to progressively higher concentrations for Cd and Pb. The study suggests the suitability of the use of this species in bioremediation plans for moderately contaminated environments. However, the biological response in the field should be verified by the use of transplanted organisms from a control site to a polluted site.

Cyanobacterial diversity held in microbial biological resource centers as a biotechnological asset: the case study of the newly established LEGE culture collection

Cyanobacteria are a well-known source of bioproducts which renders culturable strains a valuable resource for biotechnology purposes. We describe here the establishment of a cyanobacterial culture collection (CC) and present the first version of the strain catalog and its online database (http://lege.ciimar.up.pt/). The LEGE CC holds 386 strains, mainly collected in coastal (48%), estuarine (11%), and fresh (34%) water bodies, for the most part from Portugal (84%). By following the most recent taxonomic classification, LEGE CC strains were classified into at least 46 genera from six orders (41% belong to the Synechococcales), several of them are unique among the phylogenetic diversity of the cyanobacteria. For all strains, primary data were obtained and secondary data were surveyed and reviewed, which can be reached through the strain sheets either in the catalog or in the online database. An overview on the notable biodiversity of LEGE CC strains is showcased, including a searchable phylogenetic tree and images for all strains. With this work, 80% of the LEGE CC strains have now their 16S rRNA gene sequences deposited in GenBank. Also, based in primary data, it is demonstrated that several LEGE CC strains are a promising source of extracellular polymeric substances (EPS). Through a review of previously published data, it is exposed that LEGE CC strains have the potential or actual capacity to produce a variety of biotechnologically interesting compounds, including common cyanotoxins or unprecedented bioactive molecules. Phylogenetic diversity of LEGE CC strains does not entirely reflect chemodiversity. Further bioprospecting should, therefore, account for strain specificity of the valuable cyanobacterial holdings of LEGE CC.

Testing of two different strains of green microalgae for Cu and Ni removal from aqueous media

The concentration of metal ions in aqueous media is a major environmental problem due to their persistence and non-biodegradability that poses hazards to the ecosystem and human health. In this study, the effect of Cu and Ni on the growth of two green microalgal strains, Chlorella vulgaris and Desmodesmus sp., was evaluated along with the removal capacity from single metal solutions (12days exposure; metal concentration range: 1.9-11.9mgL^-1). Microalgal growth showed to decrease at increasing metal concentrations, but promising metal removal efficiencies were recorded: up to 43% and 39% for Cu by Desmodesmus sp. and C. vulgaris, respectively, with a sorption capacity of 33.4mggDW^-1 for Desmodesmus sp. As for Ni, at the concentration of 5.7mgL^-1, the removal efficiency reached 32% for C. vulgaris and 39% for Desmodesmus sp. In addition, Desmodesmus sp. growth and metal removal were evaluated employing bimetallic solutions. In these tests, the removal efficiency for Cu was higher than that of Ni for all the mix solutions tested with a maximum of 95%, while Ni-removal reached 90% only for the lowest concentrations tested. Results revealed that the biosorption of both metals reached maximum removal levels within the fourth day of incubation (with metal uptakes of 67mgCugDW^-1 and 37mgNigDW^-1). Intracellular bioaccumulation of metals in Desmodesmus sp. was evaluated by confocal laser scanning microscopy after DAPI staining of cells exposed or not to Cu during their growth. Imaging suggested that Cu is sequestered in polyphosphate bodies within the cells, as observable also in phosphorus deprived cultures. Our results indicate the potential of employing green microalgae for bioremediation of metal-polluted waters, due to their ability to grow in the presence of high metal concentrations and to remove them efficiently.

Bacterial community analysis of anoxic/aeration (A/O) system in a combined process for gibberellin wastewater treatment

Gibberellin wastewater cannot be directly discharged without treatment due to its high concentrations of sulfate and organic compounds and strong acidity. Therefore, multi-stage anaerobic bioreactor + micro-aerobic+ anoxic/aeration (A/O) + biological contact oxidation combined processes are used to treat gibberellin wastewater. However, knowledge of the treatment effects of the A/O process and bacterial community structure in the aeration tank reactors of such systems is sparse. Therefore, this study was conducted to investigate the treatment effects and operation of the A/O process on gibberellin wastewater, as well as changes in the bacterial community structure of activated sludge in the aeration tank during treatment. Moreover, removal was examined based on evaluation of effluent after A/O treatment. Although influent chemical oxygen demand (COD), NH₃-N and total phosphorus (TP) fluctuated, effluent COD, NH₃-N and TP remained stable. Moreover, average COD, NH₃-N and TP removal efficiency were 68.41%, 93.67% and 45.82%, respectively, during the A/O process. At the phylum level, Proteobacteria was the dominant phylum in all samples, followed by Chloroflexi, Bacteroidetes and Actinobacteria. Proteobacteria played an important role in the removal of organic matter. Chloroflexi was found to be responsible for the degradation of carbohydrates and Bacteroidetes also had been found to be responsible for the degradation of complex organic matters. Actinobacteria are able to degrade a variety of environmental chemicals. Additionally, Anaerolineaceae_uncultured was the major genus in samples collected on May 25, 2015, while Novosphingobium and Nitrospira were dominant in most samples. Nitrosomonas are regarded as the dominant ammonia-oxidizing bacteria, while Nitrospira are the main nitrite-oxidizing bacteria. Bacterial community structure varied considerably with time, and a partial Mantel test showed a highly significant positive correlation between bacterial community structure and DO. The bacterial community structure was also positively correlated with temperature and SO₄^2-.

Photo-flocculation of microbial mat extracellular polymeric substances and their transformation into transparent exopolymer particles: Chemical and spectroscopic evidences

Upon exposure to sunlight extracellular polymeric substances (EPS) were partially transformed into transparent exopolymer particles (TEP) and unstable flocs of different sizes without the addition of any precursors. Parallel factor (PARAFAC) modelling of the sample fluorescence spectra identified humic-like and protein-like or tyrosine-like components in both untreated and irradiated EPS samples. After 58 hours of solar irradiation, humic-like substances were entirely decomposed, while the regenerated protein-like substance from EPS was the key component in the irradiated samples. Degradation and reformation of EPS occurred which was confirmed by the results of size exclusion chromatography, dissolved organic carbon, total protein and total polysaccharide analyses. Irradiated EPS was composed of -COOH or C = O (amide I band) and -NH and -CN (amide II band), while Fourier transform infrared spectroscopy (FTIR) of TEP revealed more acidic -COOH and -C-O groups, indicating typical acidic protein-like TEP. The regenerated protein-like substances could form complexes with free metals originating from degraded EPS in irradiated samples, which could be responsible for the formation of TEP/floc in the aqueous media. These results suggest that TEP/floc formation from EPS could occur by a complexation mechanism between dissolved organic matter and metals, thereby causing ionic charge neutralisation upon sunlight exposure.

Bio-rescue of marine environments: On the track of microbially-based metal/metalloid remediation

The recent awareness of the huge relevance of marine resources and ecological services is driving regulatory demands for their protection from overwhelming contaminants, such as metals/metalloids. These contaminants enter and accumulate in different marine niches, hence deeply compromising their quality and integrity. Bioremediation has been flourishing to counteract metal/metalloid impacts, since it provides cost-effective and sustainable options by relying on ecology-based technologies. The potential of marine microbes for metal/metalloid bioremediation is the core of many studies, due to their high plasticity to overcome successive environmental hurdles. However, any thorough review on the advances of metal/metalloid bioremediation in marine environments was so far unveiled. This review is designed to (i) outline the characteristics and potential of marine microbes for metal/metalloid bioremediation, (ii) describe the underlying pathways of resistance and detoxification, as well as useful methodologies for their characterization, (iii) identify major bottlenecks on metal/metalloid bioremediation with marine microbes, (iv) present alternative strategies based on microbial consortia and engineered microbes for enhanced bioremediation, and (v) propose key research avenues to keep pace with a changing society, science and economy in a sustainable manner.

Heavy metals removal from wastewater using extracellular polymeric substances produced by Cloacibacterium normanense in wastewater sludge supplemented with crude glycerol and study of extracellular polymeric substances extraction by different methods

Extracellular polymeric substances synthesis by Cloacibacterium was affected by different concentrations of glycerol in the medium. The concentration of EPS in 72h fermentation was increased from 13g/L with no external carbon supplementation to 21.3±0.7g/L with 2% (w/v) crude glycerol addition. Physical and chemical extraction methods (heating, centrifugation and ethylene diamine tetra-acetic acid (EDTA)) were used in this study and their performance to extract EPS was compared. A significant variation in concentration of extracted B-EPS (broth-EPS) by heating (20.8±0.5g/L) and centrifugation (21.3±0.7g/L) extraction methods was not observed. However, in case of extraction with EDTA (5g/L), the B-EPS concentration extracted was 25.5±0.9g/L, which exhibited high flocculation activity of 95.3±0.5% at optimum dose of 23.1mgB-EPS/gkaolin. Moreover, Ni removal efficiency of 80% from primary treated wastewater was achieved using 35mg/L of B-EPS extracted by centrifugation method.

Released polysaccharides (RPS) from Cyanothece sp. CCY 0110 as biosorbent for heavy metals bioremediation: interactions between metals and RPS binding sites

Bioremediation of heavy metals using microorganisms can be advantageous compared to conventional physicochemical methods due to the use of renewable resources and efficiencies of removal particularly cations at low concentrations. In this context, cyanobacteria/cyanobacterial extracellular polymeric substances (EPS) emerge as a valid alternative due to the anionic nature and particular composition of these polymers. In this work, various culture fractions of the unicellular cyanobacterium Cyanothece sp. CCY 0110 were employed in bioremoval assays using three of the most common heavy metal pollutants in water bodies-copper, cadmium, and lead-separately or in combined systems. Our study showed that the released polysaccharides (RPS) were the most efficient fraction, removing the metal(s) by biosorption. Therefore, this polymer was subsequently used to evaluate the interactions between the metals/RPS binding sites using SEM-EDX, ICP-OES, and FTIR. Acid and basic pretreatments applied to the polymer further improve the process efficiency, and the exposure to an alkaline solution seems to alter the RPS conformation. The differences observed in the specific metal bioremoval seem to be mainly due to the RPS organic functional groups available, mainly carboxyl and hydroxyl, than to an ion exchange mechanism. Considering that Cyanothece is a highly efficient RPS-producer and that RPS can be easily separated from the culture, immobilized or confined, this polymer can be advantageous for the establishment/improvement of heavy metal removal systems.

Biosafety of biotechnologically important microalgae: intrinsic suicide switch implementation in cyanobacterium Synechocystis sp. PCC 6803

In recent years, photosynthetic autotrophic cyanobacteria have attracted interest for biotechnological applications for sustainable production of valuable metabolites. Although biosafety issues can have a great impact on public acceptance of cyanobacterial biotechnology, biosafety of genetically modified cyanobacteria has remained largely unexplored. We set out to incorporate biocontainment systems in the model cyanobacterium Synechocystis sp. PCC 6803. Plasmid-encoded safeguards were constructed using the nonspecific nuclease NucA from Anabaena combined with different metal-ion inducible promoters. In this manner, conditional lethality was dependent on intracellular DNA degradation for regulated autokilling as well as preclusion of horizontal gene transfer. In cells carrying the suicide switch comprising the nucA gene fused to a variant of the copM promoter, efficient inducible autokilling was elicited. Parallel to nuclease-based safeguards, cyanobacterial toxin/antitoxin (TA) modules were examined in biosafety switches. Rewiring of Synechocystis TA pairs ssr1114/slr0664 and slr6101/slr6100 for conditional lethality using metal-ion responsive promoters resulted in reduced growth, rather than cell killing, suggesting cells could cope with elevated toxin levels. Overall, promoter properties and translation efficiency influenced the efficacy of biocontainment systems. Several metal-ion promoters were tested in the context of safeguards, and selected promoters, including a nrsB variant, were characterized by beta-galactosidase reporter assay.

Summary: Biosafety of biotechnologically important microalgae was addressed by suicide switch implementation in cyanobacterium Synechocystis sp. PCC 6803. This is the first report of biocontainment safeguards in cyanobacteria.

Capsular polysaccharides facilitate enhanced iron acquisition by the colonial cyanobacterium Microcystis sp. isolated from a freshwater lake

Microcystis sp., especially in its colonial form, is a common dominant species during cyanobacterial blooms in many iron-deficient water bodies. It is still not entirely clear, however, how the colonial forms of Microcystis acclimate to iron-deficient habitats, and the responses of unicellular and colonial forms to iron-replete and iron-deficient conditions were examined here. Growth rates and levels of photosynthetic pigments declined to a greater extent in cultures of unicellular Microcystis than in cultures of the colonial form in response to decreasing iron concentrations, resulting in the impaired photosynthetic performance of unicellular Microcystis as compared to colonial forms as measured by variable fluorescence and photosynthetic oxygen evolution. These results indicate that the light-harvesting ability and photosynthetic capacity of colonial Microcystis was less affected by iron deficiency than the unicellular form. The carotenoid contents and nonphotochemical quenching of colonial Microcystis were less reduced than those of the unicellular form under decreasing iron concentrations, indicating that the colonial morphology enhanced photoprotection and acclimation to iron-deficient conditions. Furthermore, large amounts of iron were detected in the capsular polysaccharides (CPS) of the colonies, and more iron was found to be attached to the colonial Microcystis CPS under decreasing iron conditions as compared to unicellular cultures. These results demonstrated that colonial Microcystis can acclimate to iron deficiencies better than the unicellular form, and that CPS plays an important role in their acclimation advantage in iron-deficient waters.

Metal removal and reduction potential of an exopolysaccharide produced by Arctic psychrotrophic bacterium Pseudomonas sp. PAMC 28620

Metal reducing potential of an exopolysaccharide (EPS) produced by Arctic glacier soil bacteriumPseudomonassp. PAMC 28620.

Development of a Laboratory Model of a Phototroph-Heterotroph Mixed-Species Biofilm at the Stone/Air Interface

Recent scientific investigations have shed light on the ecological importance and physiological complexity of subaerial biofilms (SABs) inhabiting lithic surfaces. In the field of sustainable cultural heritage (CH) preservation, mechanistic approaches aimed at investigation of the spatiotemporal patterns of interactions between the biofilm, the stone, and the atmosphere are of outstanding importance. However, these interactions have proven difficult to explore with field experiments due to the inaccessibility of samples, the complexity of the ecosystem under investigation and the temporal resolution of the experiments. To overcome these limitations, we aimed at developing a unifying methodology to reproduce a fast-growing, phototroph-heterotroph mixed species biofilm at the stone/air interface. Our experiments underscore the ability of the dual-species SAB model to capture functional traits characteristic of biofilms inhabiting lithic substrate such as: (i) microcolonies of aggregated bacteria; (ii) network like structure following surface topography; (iii) cooperation between phototrophs and heterotrophs and cross feeding processes; (iv) ability to change the chemical parameters that characterize the microhabitats; (v) survival under desiccation and (vi) biocide tolerance. With its advantages in control, replication, range of different experimental scenarios and matches with the real ecosystem, the developed model system is a powerful tool to advance our mechanistic understanding of the stone-biofilm-atmosphere interplay in different environments.

Slr2019, lipid A transporter homolog, is essential for acidic tolerance in Synechocystis sp. PCC6803

Living organisms must defend themselves against various environmental stresses. Extracellular polysaccharide-producing cells exhibit enhanced tolerance toward adverse environmental stress. In Synechocystis sp. PCC6803 (Synechocystis), lipopolysaccharide (LPS) may play a role in this protection. To examine the relationship between stress tolerance of Synechocystis and LPS, we focused on Slr2019 because Slr2019 is homologous to MsbA in Escherichia coli, which is related to LPS synthesis. First, to obtain a defective mutant of LPS, we constructed the slr2019 insertion mutant (slr2019) strain. Sodium deoxycholate-polyacrylamide gel electrophoresis indicated that slr2019 strain did not synthesize normal LPS. Second, to clarify the participation of LPS in acid tolerance, wild type (WT) and slr2019 strain were grown under acid stress; slr2019 strain growth was significantly weaker than WT growth. Third, to examine influences on stress tolerance, slr2019 strain was grown under various stresses. Under salinity and temperature stress, slr2019 strain grew significantly slower than WT. To confirm cell morphology, cell shape and envelope of slr2019 strain were observed by transmission electron microscopy; slr2019 cells contained more electron-transparent bodies than WT cells. Finally, to confirm whether electron-transparent bodies are poly-3-hydroxybutyrate (PHB), slr2019 strain was stained with Nile Blue A, a PHB detector, and observed by fluorescence microscopy. The PHB granule content ratio of WT and slr2019 strain grown at BG-11 pH 8.0 was each 7.18 and 8.41 %. At pH 6.0, the PHB granule content ratio of WT and slr2019 strain was 2.99 and 2.60 %. However, the PHB granule content ratio of WT and slr2019 strain grown at BG-11N-reduced was 10.82 and 0.56 %. Because slr2019 strain significantly decreased PHB under BG-11N-reduced compared with WT, LPS synthesis may be related to PHB under particular conditions. These results indicated that Slr2019 is necessary for Synechocystis survival in various stresses.

Illumina MiSeq sequencing investigation on the contrasting soil bacterial community structures in different iron mining areas

Mine activities leaked heavy metals into surrounding soil and may affected indigenous microbial communities. In the present study, the diversity and composition of the bacterial community in soil collected from three regions which have different pollution degree, heavy pollution, moderate pollution, and non-pollution, within the catchment of Chao River in Beijing City, were compared using the Illumina MiSeq sequencing technique. Rarefaction results showed that the polluted area had significant higher bacterial alpha diversity than those from unpolluted area. Principal component analysis (PCA) showed that microbial communities in the polluted areas had significant differences compared with the unpolluted area. Moreover, PCA at phylum level and Matastats results demonstrated that communities in locations shared similar phyla diversity, indicating that the bacterial community changes under metal pollution were not reflected on phyla structure. At genus level, the relative abundance of dominant genera changed in sites with degrees of pollution. Genera Bradyrhizobium, Rhodanobacter, Reyranella, and Rhizomicrobium significantly decreased with increasing pollution degree, and their dominance decreased, whereas several genera (e.g., Steroidobacter, Massilia, Arthrobacter, Flavisolibacter, and Roseiflexus) increased and became new dominant genera in the heavily metal-polluted area. The potential resistant bacteria, found within the genera of Thiobacillus, Pseudomonas, Arthrobacter, Microcoleus, Leptolyngbya, and Rhodobacter, are less than 2.0 % in the indigenous bacterial communities, which play an important role in soil ecosystem. This effort to profile the background diversity may set the first stage for better understanding the mechanism underlying the community structure changes under in situ mild heavy metal pollution.

Role of Geitlerinema sp. DE2011 and Scenedesmus sp. DE2009 as Bioindicators and Immobilizers of Chromium in a Contaminated Natural Environment

The aim of this work was to study the potential of the two phototrophic microorganisms, both isolated from Ebro Delta microbial mats, to be used as bioindicators and immobilizers of chromium. The results obtained indicated that (i) the Minimum Metal Concentration (MMC) significantly affecting Chlorophyll a intensity in Geitlerinema sp. DE2011 and Scenedesmus sp. DE2009 was 0.25 µM and 0.75 µM, respectively, these values being lower than those established by current legislation, and (ii) Scenedesmus sp. DE2009 was able to immobilize chromium externally in extracellular polymeric substances (EPS) and intracellularly in polyphosphate (PP) inclusions. Additionally, this microorganism maintained high viability, including at 500 µM. Based on these results, we postulate that Geitlerinema sp. DE2011 and Scenedesmus sp. DE2009 are good chromium-indicators of cytotoxicity and, further, that Scenedesmus sp. DE2009 plays an important role in immobilizing this metal in a contaminated natural environment.

Influence of biofilms on heavy metal immobilization in sustainable urban drainage systems (SuDS)

This paper physically and numerically models the influence of biofilms on heavy metal removal in a gravel filter. Experimental flow columns were constructed to determine the removal of Cu, Pb and Zn by gabbro and dolomite gravel lithologies with and without natural biofilm from sustainable urban drainage systems (SuDS). Breakthrough experiments showed that, whilst abiotic gravel filters removed up to 51% of metals, those with biofilms enhanced heavy metal removal by up to a further 29%, with Cu removal illustrating the greatest response to biofilm growth. An advection-diffusion equation successfully modelled metal tracer transport within biofilm columns. This model yielded a permanent loss term (k) for metal tracers of between 0.01 and 1.05, correlating well with measured data from breakthrough experiments. Additional 16S rRNA clone library analysis of the biofilm indicated strong sensitivity of bacterial community composition to the lithology of the filter medium, with gabbro filters displaying Proteobacteria dominance (54%) and dolomite columns showing Cyanobacteria dominance (47%).