Effects of high hydrostatic pressure on bacterial cytoskeleton FtsZ polymers in vivo and in vitro

Genetic adaptations of sea anemone to hydrothermal environment

Hydrothermal vent habitats are characterized by high hydrostatic pressure, darkness, and the continuous release of toxic metal ions into the surrounding environment where sea anemones and other invertebrates thrive. Nevertheless, the understanding of metazoan metal ion tolerances and environmental adaptations remains limited. We assembled a chromosome-level genome for the vent sea anemone, Alvinactis idsseensis sp. nov. Comparative genomic analyses revealed gene family expansions and gene innovations in A. idsseensis sp. nov. as a response to high concentrations of metal ions. Impressively, the metal tolerance proteins MTPs is a unique evolutionary response to the high concentrations of Fe2+ and Mn2+ present in the environments of these anemones. We also found genes associated with high concentrations of polyunsaturated fatty acids that may respond to high hydrostatic pressure and found sensory and circadian rhythm-regulated genes that were essential for adaptations to darkness. Overall, our results provide insights into metazoan adaptation to metal ions, high pressure, and darkness in hydrothermal vents.

Pseudo-chromosome-length genome assembly for a deep-sea eel Ilyophis brunneus sheds light on the deep-sea adaptation

High hydrostatic pressure, low temperature, and scarce food supply are the major factors that limit the survival of vertebrates in extreme deep-sea environments. Here, we constructed a high-quality genome of the deep-sea Muddy arrowtooth eel (MAE, Ilyophis brunneus, captured below a depth of 3,500 m) by using Illumina, PacBio, and Hi-C sequencing. We compare it against those of shallow-water eel and other outgroups to explore the genetic basis that underlies the adaptive evolution to deep-sea biomes. The MAE genome was estimated to be 1.47 Gb and assembled into 14 pseudo-chromosomes. Phylogenetic analyses indicated that MAE diverged from its closely related shallow-sea species, European eel, ∼111.9 Mya and experienced a rapid evolution. The genome evolutionary analyses primarily revealed the following: (i) under high hydrostatic pressure, the positively selected gene TUBGCP3 and the expanded family MLC1 may improve the cytoskeleton stability; ACOX1 may enhance the fluidity of cell membrane and maintain transport activity; the expansion of ABCC12 gene family may enhance the integrity of DNA; (ii) positively selected HARS likely maintain the transcription ability at low temperatures; and (iii) energy metabolism under a food-limited environment may be increased by expanded and positively selected genes in AMPK and mTOR signaling pathways.

Morphological and molecular evolution of hadal amphipod’s eggs provides insights into embryogenesis under high hydrostatic pressure

Hadal zones are unique habitats characterized by high hydrostatic pressure (HHP) and scarce food supplies. The ability of eggs of species dwelling in hadal zones to develop into normal embryo under high hydrostatic pressure is an important evolutionary and developmental trait. However, the mechanisms underlying the development of eggs of hadal-dwelling species remain unknown due to the difficulty of sampling ovigerous females. Here, morphological and transcriptome analyses of eggs of the “supergiant” amphipod Alicella gigantea collected from the New Britain Trench were conducted. The morphology of A. gigantea eggs, including size, was assessed and the ultrastructure of the eggshell was investigated by scanning electron microscopy. Transcriptome sequencing and molecular adaptive evolution analysis of A. gigantea eggs showed that, as compared with shallow-water Gammarus species, genes exhibiting accelerated evolution and the positively selected genes were mostly related to pathways associated with “mitosis” and “chitin-based embryonic cuticle biosynthetic process”, suggesting that “normal mitosis maintenance” and “cuticle development and protection” are the two main adaptation strategies for survival of eggs in hadal environments. In addition, the concentration of trimethylamine oxide (TMAO), an important osmotic regulator, was significantly higher in the eggs of hadal amphipods as compared to those of shallow-water species, which might promote the eggs’ adaptation abilities. Morphological identification, evolutionary analysis, and the trimethylamine oxide concentration of A. gigantea eggs will facilitate a comprehensive overview of the piezophilic adaptation of embryos in hadal environments and provide a strategy to analyze embryogenesis under high hydrostatic pressure.

Characterizing the Piezosphere: The Effects of Decompression on Microbial Growth Dynamics

The extent to which the full diversity of the subsurface microbiome can be captured via cultivation is likely hindered by the inevitable loss of cellular viability from decompression during sampling, enrichment, and isolation. Furthermore, the pressure tolerance of previously isolated strains that span surface and subsurface ecosystems can shed light into microbial activity and pressure adaptation in these transition zones. However, assessments of the effects of elevated pressure on the physiology of piezotolerant and piezosensitive species may be biased by high-pressure enrichment techniques. Here, we compared two high-pressure cultivation techniques-one that requires decompression of the whole cultures during sampling and one that employs the previously described isobaric PUSH devices-to explore the effects of repeated decompression during incubations performed to characterize isolates from deep environments. Two model sulfate-reducing prokaryotes were used to test the effects of decompression/repressurization cycles on growth rates, cell yields, and pressure tolerance. The mesophilic bacterium Desulfovibrio salexigens was cultivated from 0.1 to 50 MPa, and the hyperthermophilic archaeon Archaeoglobus fulgidus was tested from 0.1 to 98 MPa. For both cultivation methods, D. salexigens showed exponential growth up to 20 MPa, but faster growth rates were observed for isobaric cultivation. Furthermore, at 30 MPa minor growth was observed in D. salexigens cultures only for isobaric conditions. Isobaric conditions also extended exponential growth of A. fulgidus to 60 MPa, compared to 50 MPa when cultures were decompressed during subsampling. For both strains, growth rates and cell yields decreased with increasing pressures, and the most pronounced effects of decompression were observed at the higher end of the pressure ranges. These results highlight that repeated decompression can have a significant negative impact on cell viability, suggesting that decompression tolerance may depend on habitat depth. Furthermore, sampling, enrichment, and cultivation in isobaric devices is critical not only to explore the portion of the deep biosphere that is sensitive to decompression, but also to better characterize the pressure limits and growth characteristics of piezotolerant and piezosensitive species that span surface and subsurface ecosystems.

Morphological Phenotypes, Cell Division, and Gene Expression of Escherichia coli under High Concentration of Sodium Sulfate

Sodium and sulfate ions are among the suggested abundant ions on Europa, a moon of Jupiter. In order to investigate the potential habitability of Europa, we study the effects of sodium sulfate (Na₂SO₄) on a non-halophilic bacterium by subjecting Escherichia coli (E. coli) to a wide range of Na₂SO₄ concentrations (0–1.0 m). We discover that, as the concentration of sodium sulfate increases, the biomass doubling time increases and the cell growth is completely inhibited at 1.0 m Na₂SO₄. Furthermore, we find that E. coli exhibits three distinct morphological phenotypes—(i) shortened, (ii) normal, and (iii) elongated/filamented cells at 0.6 m and 0.8 m Na₂SO₄. We have examined the expression of different genes involved in sodium and sulfate transport (nhaA, nhaB, cysZ, sbp), osmotically driven transport of water (aqpZ), sulfate metabolism (cysN), fatty acid production (fabA), and a global transcriptional regulator (osmZ). Our results suggest that the expression of these genes is not affected significantly at high concentrations of sodium sulfate in the exponential growth phase. Using our experimental data and the existing data in the literature, we show that the osmotic pressure difference may play a major role in determining the growth inhibition of E. coli and B. subtilis at high concentrations of salt.

Responses to the Hydrostatic Pressure of Surface and Subsurface Strains of Pseudothermotoga elfii Revealing the Piezophilic Nature of the Strain Originating From an Oil-Producing Well

Microorganisms living in deep-oil reservoirs face extreme conditions of elevated temperature and hydrostatic pressure. Within these microbial communities, members of the order Thermotogales are predominant. Among them, the genus Pseudothermotoga is widespread in oilfield-produced waters. The growth and cell phenotypes under hydrostatic pressures ranging from 0.1 to 50 MPa of two strains from the same species originating from subsurface, Pseudothermotoga elfii DSM9442 isolated from a deep African oil-producing well, and surface, P. elfii subsp. lettingae isolated from a thermophilic sulfate-reducing bioreactor, environments are reported for the first time. The data support evidence for the piezophilic nature of P. elfii DSM9442, with an optimal hydrostatic pressure for growth of 20 MPa and an upper limit of 40 MPa, and the piezotolerance of P. elfii subsp. lettingae with growth occurring up to 20 MPa only. Under the experimental conditions, both strains produce mostly acetate and propionate as volatile fatty acids with slight variations with respect to the hydrostatic pressure for P. elfii DSM9442. The data show that the metabolism of P. elfii DSM9442 is optimized when grown at 20 MPa, in agreement with its piezophilic nature. Both Pseudothermotoga strains form chained cells when the hydrostatic pressure increases, especially P. elfii DSM9442 for which 44% of cells is chained when grown at 40 MPa. The viability of the chained cells increases with the increase in the hydrostatic pressure, indicating that chain formation is a protective mechanism for P. elfii DSM9442.

Control of pathogenic and spoilage bacteria in meat and meat products by high pressure: Challenges and future perspectives

High-pressure processing is among the most widely used nonthermal intervention to reduce pathogenic and spoilage bacteria in meat and meat products. However, resistance of pathogenic bacteria strains in meats at the current maximum commercial equipment of 600 MPa questions the ability of inactivation by its application in meats. Pathogens including Escherichia coli, Listeria, and Salmonelle, and spoilage microbiota including lactic acid bacteria dominate in raw meat, ready-to-eat, and packaged meat products. Improved understanding on the mechanisms of the pressure resistance is needed for optimizing the conditions of pressure treatment to effectively decontaminate harmful bacteria. Effective control of the pressure-resistant pathogens and spoilage organisms in meats can be realized by the combination of high pressure with application of mild temperature and/or other hurdles including antimicrobial agents and/or competitive microbiota. This review summarized applications, mechanisms, and challenges of high pressure on meats from the perspective of microbiology, which are important for improving the understanding and optimizing the conditions of pressure treatment in the future.

Physiological, chemotaxonomic and genomic characterization of two novel piezotolerant bacteria of the family Marinifilaceae isolated from sulfidic waters of the Black Sea

Diversity analyses of microbial enrichments obtained from deep sulfidic water (2000 m) collected from the Black Sea indicated the presence of eleven novel putative lineages of bacteria affiliated to the family Marinifilaceae of the phylum Bacteroidetes. Pure cultures were obtained for four strains (i.e. M1P^T, M3P, A4^T and 44) of this family, which could be grouped into two different clades based on their 16S rRNA gene sequences. All four strains were Gram-negative, rod-shaped and facultative anaerobic bacteria. The genomes of all strains were sequenced and physiological analyses were performed. All strains utilized a wide range of carbon sources, which was supported by the presence of the pathways involved in carbon utilization encoded by their genomes. The strains were able to grow at elevated hydrostatic pressure (up to 50 MPa), which coincided with increased production of unsaturated and branched fatty acids, and a decrease in hydroxy fatty acids. Intact polar lipid analysis of all four strains showed the production of ornithine lipids, phosphatidylethanolamines and capnine lipids as major intact polar lipids (IPLs). Genes involved in hopanoid biosynthesis were also identified. However, bacteriohopanepolyols (BHPs) were not detected in the strains. Based on distinct physiological, chemotaxonomic, genotypic and phylogenetic differences compared to other members of the genera Ancylomarina and Labilibaculum, it was concluded that strains M1P^T and A4^T represented two novel species for which the names Ancylomarina euxinus sp. nov. and Labilibaculum euxinus sp. nov., respectively, are proposed.

Marine bacteria as source of antimicrobial compounds

The marine environment encompasses a huge biological diversity and can be considered as an underexplored location for prospecting bioactive molecules. In this review, the current state of art about antimicrobial molecules from marine bacteria has been summarized considering the main phylum and sources evolved in a marine environment. Considering the last two decades, we have found as most studied group of bacteria producers of substances with antimicrobial activity is the Firmicutes phylum, in particular strains of the Bacillus genus. The reason for that can be attributed to the difficult cultivation of typical Actinobacteria from a marine sediment, whose members are the major producers of antimicrobial substances in land environments. However, a reversed trend has been observed in recent years with an increasing number of reports settling on Actinobacteria. Great diversity of chemical structures have been identified, such as fijimicyns and lynamicyns from Actinomycetes and macrolactins produced by Bacillus.

Ribosome Reconstruction during Recovery from High-Hydrostatic-Pressure-Induced Injury in Bacillus subtilis

Vegetative cells of Bacillus subtilis can recover from injury after high-hydrostatic-pressure (HHP) treatment at 250 MPa. DNA microarray analysis revealed that substantial numbers of ribosomal genes and translation-related genes (e.g., translation initiation factors) were upregulated during the growth arrest phase after HHP treatment. The transcript levels of cold shock-responsive genes, whose products play key roles in efficient translation, and heat shock-responsive genes, whose products mediate correct protein folding or degrade misfolded proteins, were also upregulated. In contrast, the transcript level of hpf, whose product (Hpf) is involved in ribosome inactivation through the dimerization of 70S ribosomes, was downregulated during the growth arrest phase. Sucrose density gradient sedimentation analysis revealed that ribosomes were dissociated in a pressure-dependent manner and then reconstructed. We also found that cell growth after HHP-induced injury was apparently inhibited by the addition of Mn2+ or Zn2+ to the recovery medium. Ribosome reconstruction in the HHP-injured cells was also significantly delayed in the presence of Mn2+ or Zn2+ Moreover, Zn2+, but not Mn2+, promoted dimer formation of 70S ribosomes in the HHP-injured cells. Disruption of the hpf gene suppressed the Zn2+-dependent accumulation of ribosome dimers, partially relieving the inhibitory effect of Zn2+ on the growth recovery of HHP-treated cells. In contrast, it was likely that Mn2+ prevented ribosome reconstruction without stimulating ribosome dimerization. Our results suggested that both Mn2+ and Zn2+ can prevent ribosome reconstruction, thereby delaying the growth recovery of HHP-injured B. subtilis cells.IMPORTANCE HHP treatment is used as a nonthermal processing technology in the food industry to inactivate bacteria while retaining high quality of foods under suppressed chemical reactions. However, some populations of bacterial cells may survive the inactivation. Although the survivors are in a transient nongrowing state due to HHP-induced injury, they can recover from the injury and then start growing, depending on the postprocessing conditions. The recovery process in terms of cellular components after the injury remains unclear. Transcriptome analysis using vegetative cells of Bacillus subtilis revealed that the translational machinery can preferentially be reconstructed after HHP treatment. We found that both Mn2+ and Zn2+ prolonged the growth-arrested stage of HHP-injured cells by delaying ribosome reconstruction. It is likely that ribosome reconstruction is crucial for the recovery of growth ability in HHP-injured cells. This study provides further understanding of the recovery process in HHP-injured B. subtilis cells.

Thickness of Polyelectrolyte Layers of Separately Confined Bacteria Alters Key Physiological Parameters on a Single Cell Level

Confinement of bacterial cells in a matrix or in capsules is an integral part of many biotechnological applications. Here, the well-known layer-by-layer method of deposition of a polyelectrolyte film a few nanometers in thickness to confine separated bacterial cells in permeable and physically durable shells has been examined. Due to the physical properties of such a confinement, we found that this method enables investigation of effects of physical barriers against mass gain and cell division. Using the method of time-lapse confocal microscopy, we observed a prolonged lag phase, dependent on the number of polyelectrolyte layers. In the confinement, both the GFP fluorescent signal from the leaking T7 promoter and the cell size were increased by factors of more than five and two, respectively. This creates a paradigm shift that enables use of mechanical entrapment for control of bacterial cell physiology and opens possibilities of controlling the division rate as well as gene expression. These effects can be attributed to the perturbation of the sensing of the cell size, which results in disproportional synthesis of a cell envelope impinging the intracellular material and compels cells to grow rapidly. In addition, the charged surface of cells enables prolonged intercellular physical interaction and results in spherically shaped microcolonies.

On the Origin of Microtubules' High-Pressure Sensitivity

For over 50 years, it has been known that the mitosis of eukaryotic cells is inhibited already at high hydrostatic pressure conditions of 30 MPa. This effect has been attributed to the disorganization of microtubules, the main component of the spindle apparatus. However, the structural details of the depolymerization and the origin of the pressure sensitivity have remained elusive. It has also been a puzzle how complex organisms could still successfully inhabit extreme high-pressure environments such as those encountered in the depth of oceans. We studied the pressure stability of microtubules at different structural levels and for distinct dynamic states using high-pressure Fourier-transform infrared spectroscopy and Synchrotron small-angle x-ray scattering. We show that microtubules are hardly stable under abyssal conditions, where pressures up to 100 MPa are reached. This high-pressure sensitivity can be mainly attributed to the internal voids and packing defects in the microtubules. In particular, we show that lateral and longitudinal contacts feature different pressure stabilities, and they define also the pressure stability of tubulin bundles. The intactness of both contact types is necessary for the functionality of microtubules in vivo. Despite being known to dynamically stabilize microtubules and prevent their depolymerization, we found that the anti-cancer drug taxol and the accessory protein MAP2c decrease the pressure stability of microtubule protofilaments. Moreover, we demonstrate that the cellular environment itself is a crowded place and accessory proteins can increase the pressure stability of microtubules and accelerate their otherwise highly pressure-sensitive de novo formation.

Mild hydrostatic pressure triggers oxidative responses in Escherichia coli

Hydrostatic pressure is an important physical stimulus which can cause various responses in bacterial cells. The survival and cellular processes of Escherichia coli under hydrostatic pressures between 10 MPa and 110 MPa have been studied. However, understanding bacterial responses to moderately elevated pressure of up to 10 MPa is useful for a range of different applications including for example in smart and responsive materials. In this study, the genetic responses of E. coli K-12 MG1655 to 1 MPa pressure was examined using transcriptomic analysis by RNA-Seq. The results show that 101 genes were differentially expressed under 1 MPa pressure in E. coli cells, with 85 of them up-regulated. The analysis suggested that some genes were over expressed to adapt the increase of oxygen levels in our system, and several functional categories are involved including oxidative stress responses, Fe-S cluster assembly and iron acquisition. Two differentially expressed genes azuC and entC were further investigated using RT-qPCR, and GFP reported strains of those two genes were created, AG1319 (P_azuCazuC-msfgfp) and AG1321 (P_entCentC-msfgfp). A linear response of azuC expression was observed between 0 MPa to 1 MPa by monitoring the fluorescence signal of strain AG1319 (P_azuCazuC-msfgfp). This study is the first report to demonstrate the genetic response of bacterial cells under 1 MPa hydrostatic pressure, and provides preliminary data for creating pressure sensing bacterial strains for a wide range of applications.

De novo transcriptome assembly and positive selection analysis of an individual deep-sea fish

Background

High hydrostatic pressure and low temperatures make the deep sea a harsh environment for life forms. Actin organization and microtubules assembly, which are essential for intracellular transport and cell motility, can be disrupted by high hydrostatic pressure. High hydrostatic pressure can also damage DNA. Nucleic acids exposed to low temperatures can form secondary structures that hinder genetic information processing. To study how deep-sea creatures adapt to such a hostile environment, one of the most straightforward ways is to sequence and compare their genes with those of their shallow-water relatives.

Results

We captured an individual of the fish species Aldrovandia affinis, which is a typical deep-sea inhabitant, from the Okinawa Trough at a depth of 1550 m using a remotely operated vehicle (ROV). We sequenced its transcriptome and analyzed its molecular adaptation. We obtained 27,633 protein coding sequences using an Illumina platform and compared them with those of several shallow-water fish species. Analysis of 4918 single-copy orthologs identified 138 positively selected genes in A. affinis, including genes involved in microtubule regulation. Particularly, functional domains related to cold shock as well as DNA repair are exposed to positive selection pressure in both deep-sea fish and hadal amphipod.

Conclusions

Overall, we have identified a set of positively selected genes related to cytoskeleton structures, DNA repair and genetic information processing, which shed light on molecular adaptation to the deep sea. These results suggest that amino acid substitutions of these positively selected genes may contribute crucially to the adaptation of deep-sea animals. Additionally, we provide a high-quality transcriptome of a deep-sea fish for future deep-sea studies.

Electronic supplementary material

The online version of this article (10.1186/s12864-018-4720-z) contains supplementary material, which is available to authorized users.

Dynamics of phenotypic switching of bacterial cells with temporal fluctuations in pressure

Phenotypic switching is one of the mechanisms by which bacteria thrive in ever changing environmental conditions around them. Earlier studies have shown that the application of steady high hydrostatic pressure leads to stochastic switching of mesophilic bacteria from a cellular phenotype having a normal cell cycle to another phenotype lacking cell division. Here, we have studied the dynamics of this phenotypic switching with fluctuating periodic pressure using a set of experiments and a theoretical model. Our results suggest that the phenotypic switching rate from high-pressure phenotype to low-pressure phenotype in the reversible regime is larger as compared to the switching rate from low-pressure phenotype to high-pressure phenotype. Furthermore, we find that even though the cell division and elongation are presumably regulated by a large number of genes the underlying physics of the dynamics of stochastic switching at high pressure is captured reasonably well by a simple two-state model.

Characterization of high hydrostatic pressure-injured Bacillus subtilis cells

High hydrostatic pressure (HHP) affects various cellular processes. Using a sporulation-deficient Bacillus subtilis strain, we characterized the properties of vegetative cells subjected to HHP. When stationary-phase cells were exposed to 250 MPa of HHP for 10 min at 25 °C, approximately 50% of cells were viable, although they exhibited a prolonged growth lag. The HHP-injured cells autolyzed in the presence of NaCl or KCl (at concentrations ≥100 mM). Superoxide dismutase slightly protected the viability of HHP-treated cells, whereas vegetative catalases had no effect. Thus, unlike HHP-injured Escherichia coli, oxidative stress only slightly affected vegetative B. subtilis subjected to HHP.

Impact of high hydrostatic pressure on bacterial proteostasis

High hydrostatic pressure (HHP) is an important factor that limits microbial growth in deep-sea ecosystems to specifically adapted piezophiles. Furthermore, HHP treatment is used as a novel food preservation technique because of its ability to inactivate pathogenic and spoilage bacteria while minimizing the loss of food quality. Disruption of protein homeostasis (i.e. proteostasis) as a result of HHP-induced conformational changes in ribosomes and proteins has been considered as one of the limiting factors for both microbial growth and survival under HHP conditions. This work therefore reviews the effects of sublethal (≤100MPa) and lethal (>100MPa) pressures on protein synthesis, structure, and functionality in bacteria. Furthermore, current understanding on the mechanisms adopted by piezophiles to maintain proteostasis in HHP environments and responses developed by atmospheric-adapted bacteria to protect or restore proteostasis after HHP exposure are discussed.

Challenging Oil Bioremediation at Deep-Sea Hydrostatic Pressure

The Deepwater Horizon accident has brought oil contamination of deep-sea environments to worldwide attention. The risk for new deep-sea spills is not expected to decrease in the future, as political pressure mounts to access deep-water fossil reserves, and poorly tested technologies are used to access oil. This also applies to the response to oil-contamination events, with bioremediation the only (bio)technology presently available to combat deep-sea spills. Many questions about the fate of petroleum-hydrocarbons within deep-sea environments remain unanswered, as well as the main constraints limiting bioremediation under increased hydrostatic pressures and low temperatures. The microbial pathways fueling oil bioassimilation are unclear, and the mild upregulation observed for beta-oxidation-related genes in both water and sediments contrasts with the high amount of alkanes present in the spilled oil. The fate of solid alkanes (tar), hydrocarbon degradation rates and the reason why the most predominant hydrocarbonoclastic genera were not enriched at deep-sea despite being present at hydrocarbon seeps at the Gulf of Mexico have been largely overlooked. This mini-review aims at highlighting the missing information in the field, proposing a holistic approach where in situ and ex situ studies are integrated to reveal the principal mechanisms accounting for deep-sea oil bioremediation.

Transcriptome analysis of beer-spoiling Lactobacillus brevis BSO 464 during growth in degassed and gassed beer

Lactobacillus brevis BSO 464 (Lb464) is a beer-spoilage-related (BSR) isolate of interest given its unique physiological attributes; specifically, it is highly hop-tolerant and exhibits very rapid growth in pressurized/gassed beer. RNA sequencing was performed on Lb464 grown in pressurized and non-pressurized beer to determine important genetic mechanisms for growth in these environments. The data generated were compared against data in a previous transcriptional study of another lactic acid bacterium (LAB) during growth in beer, namely, Pediococcus claussenii ATCC BAA-344(T) (Pc344). Results revealed that the most important genetic elements for Lb464 growth in beer are related to biogenic amine metabolism, membrane transport and fortification, nutrient scavenging, and efficient transcriptional regulation. Comparison with the previous transcriptional study of Pc344 indicated that the total coding capacity (plasmid profile and genome size) of a LAB isolate allows for beer-spoilage virulence and adaptation to different beer environments, i.e., the ability to grow in degassed beer (during production) or gassed beer (packaged product). Further, differences in gene expression of Lb464 and Pc344 during mid-exponential growth in beer may dictate how rapidly each isolate exhausts particular carbon sources during. The presence of headspace pressure/dissolved CO2 was found to drive Lb464 transcription during mid-exponential growth in beer towards increasing cell wall and membrane modification, transport, osmoregulation, and DNA metabolism and transposition events. This transcriptional activity resembles transcriptional patterns or signatures observed in a viable, but non-culturable state established by non-related organisms, suggesting that Lb464 overall uses complex cellular regulation to maintain cell division and growth in the stressful beer environment. Additionally, increased expression of several hypothetical proteins, the hop-tolerance gene horC, and DNA repair and recombination genes from plasmids pLb464-2, -4, and -8 were observed in the gassed beer environment. Thus, plasmids can harbor genes with specific (gassed) beer growth advantages, and confirm that plasmid transfer and acquisition as important activities for adaptation to the beer environment.

A novel fluorescent protein from the deep-sea anemone Cribrinopsis japonica (Anthozoa: Actiniaria)

A fluorescent protein was identified and cloned from the deep-sea anemone Cribrinopsis japonica. Bioluminescence and fluorescence expression were examined by direct observations of live specimens and RNA-Seq analysis. Both approaches revealed a novel green fluorescent protein in the tentacles of the anemone, but bioluminescence was not observed. Behavioural observations revealed that a blue light excited the fluorescence in the tentacles, and initiated a behavioural response whereby the fluorescent tentacles became fully exposed to the blue light. The excitation and emission peaks of C. japonica’s fluorescent protein were at 500 and 510 nm, respectively, which were greener than those reported in homologs. Furthermore, this protein was highly tolerant of increased temperatures and repeated freeze–thaw treatments. The current study presents an example of fluorescence in a deep-sea cnidarian, demonstrating that fluorescent proteins could have important roles, regardless of the presence or absence of strong sunlight. It also demonstrates that this deep-sea fluorescent protein has unique characteristics, including high stability, perhaps as an adaptation to the extreme environment.

Temperature and pressure adaptation of a sulfate reducer from the deep subsurface

Microbial life in deep marine subsurface faces increasing temperatures and hydrostatic pressure with depth. In this study, we have examined growth characteristics and temperature-related adaptation of the Desulfovibrio indonesiensis strain P23 to the in situ pressure of 30 MPa. The strain originates from the deep subsurface of the eastern flank of the Juan de Fuca Ridge (IODP Site U1301). The organism was isolated at 20°C and atmospheric pressure from ~61°C-warm sediments approximately 5 m above the sediment-basement interface. In comparison to standard laboratory conditions (20°C and 0.1 MPa), faster growth was recorded when incubated at in situ pressure and high temperature (45°C), while cell filamentation was induced by further compression. The maximum growth temperature shifted from 48°C at atmospheric pressure to 50°C under high-pressure conditions. Complementary cellular lipid analyses revealed a two-step response of membrane viscosity to increasing temperature with an exchange of unsaturated by saturated fatty acids and subsequent change from branched to unbranched alkyl moieties. While temperature had a stronger effect on the degree of fatty acid saturation and restructuring of main phospholipids, pressure mainly affected branching and length of side chains. The simultaneous decrease of temperature and pressure to ambient laboratory conditions allowed the cultivation of our moderately thermophilic strain. This may in turn be one key to a successful isolation of microorganisms from the deep subsurface adapted to high temperature and pressure.

Bacterial growth and form under mechanical compression

A combination of physical and chemical processes is involved in determining the bacterial cell shape. In standard medium, Escherichia coli cells are rod-shaped, and maintain a constant diameter during exponential growth. Here, we demonstrate that by applying compressive forces to growing E. coli, cells no longer retain their rod-like shapes but grow and divide with a flat pancake-like geometry. The deformation is reversible: deformed cells can recover back to rod-like shapes in several generations after compressive forces are removed. During compression, the cell elongation rate, proliferation rate, DNA replication rate, and protein synthesis are not significantly altered from those of the normal rod-shaped cells. Quantifying the rate of cell wall growth under compression reveals that the cell wall growth rate depends on the local cell curvature. MreB not only influences the rate of cell wall growth, but also influences how the growth rate scales with cell geometry. The result is consistent with predictions of a mechanochemical model, and suggests an active mechanical role for MreB during cell wall growth. The developed compressive device is also useful for studying a variety of cells in unique geometries.

Adaptive laboratory evolution of Escherichia coli K-12 MG1655 for growth at high hydrostatic pressure

Much of microbial life on Earth grows and reproduces under the elevated hydrostatic pressure conditions that exist in deep-ocean and deep-subsurface environments. In this study adaptive laboratory evolution (ALE) experiments were conducted to investigate the possible modification of the piezosensitive Escherichia coli for improved growth at high pressure. After approximately 500 generations of selection, a strain was isolated that acquired the ability to grow at pressure non-permissive for the parental strain. Remarkably, this strain displayed growth properties and changes in the proportion and regulation of unsaturated fatty acids that indicated the acquisition of multiple piezotolerant properties. These changes developed concomitantly with a change in the gene encoding the acyl carrier protein, which is required for fatty acid synthesis.

High-Pressure Microscopy for Studying Molecular Motors

Movement is a fundamental characteristic of all living things. This biogenic function is carried out by various nanometer-sized molecular machines. Molecular motor is a typical molecular machinery in which the characteristic features of proteins are integrated; these include enzymatic activity, energy conversion, molecular recognition and self-assembly. These biologically important reactions occur with the association of water molecules that surround the motors. Applied pressures can alter the intermolecular interactions between the motors and water. In this chapter we describe the development of a high-pressure microscope and a new motility assay that enables the visualization of the motility of molecular motors under conditions of high-pressure. Our results demonstrate that applied pressure dynamically changes the motility of molecular motors such as kinesin, F1-ATPase and bacterial flagellar motors.

High hydrostatic pressure: a probing tool and a necessary parameter in biophysical chemistry

High pressures extending up to several thousands of atmospheres provide extreme conditions for biological organisms to survive. Recent studies are investigating the survival mechanisms and biological function of microorganisms under natural and laboratory conditions extending into the GigaPascal range, with applications to understanding the Earth's deep biosphere and food technology. High pressure has also emerged as a useful tool and physical parameter for probing changes in the structure and functional properties of biologically important macromolecules and polymers encountered in soft matter science. Here we highlight some areas of current interest in high pressure biophysics and physical chemistry that are emerging at the frontier of this cross-disciplinary field.

Salt-induced self-assembly of bacteria on nanowire arrays

Studying bacteria-nanostructure interactions is crucial to gaining controllable interfacing of biotic and abiotic components in advanced biotechnologies. For bioelectrochemical systems, tunable cell-electrode architectures offer a path toward improving performance and discovering emergent properties. As such, Sporomusa ovata cells cultured on vertical silicon nanowire arrays formed filamentous cells and aligned parallel to the nanowires when grown in increasing ionic concentrations. Here, we propose a model describing the kinetic and the thermodynamic driving forces of bacteria-nanowire interactions.

Effects of high hydrostatic pressure on coastal bacterial community abundance and diversity

Hydrostatic pressure is an important parameter influencing the distribution of microbial life in the ocean. In this study, the response of marine bacterial populations from surface waters to pressures representative of those under deep-sea conditions was examined. Southern California coastal seawater collected 5 m below the sea surface was incubated in microcosms, using a range of temperatures (16 to 3°C) and hydrostatic pressure conditions (0.1 to 80 MPa). Cell abundance decreased in response to pressure, while diversity increased. The morphology of the community also changed with pressurization to a predominant morphotype of small cocci. The pressure-induced community changes included an increase in the relative abundance of Alphaproteobacteria, Gammaproteobacteria, Actinobacteria, and Flavobacteria largely at the expense of Epsilonproteobacteria. Culturable high-pressure-surviving bacteria were obtained and found to be phylogenetically similar to isolates from cold and/or deep-sea environments. These results provide novel insights into the response of surface water bacteria to changes in hydrostatic pressure.

Complete cell killing by applying high hydrostatic pressure for acellular vascular graft preparation

Pressure treatment has been developed in tissue engineering application. Although the tissue scaffold prepared by a ultrahydrostatic pressure treatment has been reported, an excessive pressure has a potential to disrupt a structure of extracellular matrix through protein denaturation. It is important to understand the suitable low-pressure condition and mechanisms for cell killing. In this study, cellular morphology, mitochondria activity, and membrane permeability of mammalian cells with various pressure treatments were investigated with in vitro models. When the cells were treated with a pressure of 100 MPa for 10 min, cell morphology and adherence were the same as an untreated cells. Dehydrogenase activity in mitochondria was almost the same as untreated cells. On the other hand, when the cells were treated with the pressure of more than 200 MPa, the cells did not adhere, and the dehydrogenase activity was completely suppressed. However, green fluorescence was observed in the live/dead staining images, and the cells were completely stained as red after above 500 MPa. That is, membrane permeability was disturbed with the pressure treatment of above 500 MPa. These results indicated that the pressure of 200 MPa for 10 min was enough to induce cell killing through inactivation of mitochondria activity.

Pressure and temperature dependence of growth and morphology of Escherichia coli: experiments and stochastic model

We have investigated the growth of Escherichia coli, a mesophilic bacterium, as a function of pressure (P) and temperature (T). Escherichia coli can grow and divide in a wide range of pressure (1-400 atm) and temperature (23-40°C). For T > 30°C, the doubling time of E. coli increases exponentially with pressure and exhibits a departure from exponential behavior at pressures between 250 and 400 atm for all the temperatures studied in our experiments. The sharp change in doubling time is followed by a sharp change in phenotypic transition of E. coli at high pressures where bacterial cells switch to an elongating cell type. We propose a model that this phenotypic change in bacteria at high pressures is an irreversible stochastic process, whereas the switching probability to elongating cell type increases with increasing pressure. The model fits well the experimental data. We discuss our experimental results in the light of structural and thus functional changes in proteins and membranes.

Determination of extremely high pressure tolerance of brine shrimp larvae by using a new pressure chamber system

Hydrostatic pressure is the only one of a range of environmental parameters (water temperature, salinity, light availability, and so on) that increases in proportion with depth. Pressure tolerance is therefore essential to understand the foundation of populations and current diversity of faunal compositions at various depths. In the present study, we used a newly developed pressure chamber system to examine changes in larval activity of the salt-lake crustacean, Artemia franciscana, in response to a range of hydrostatic pressures. We showed that A. franciscana larvae were able to survive for a short period at pressures of ≤ 60 MPa (approximately equal to the pressure of 6000 m deep). At a pressure of > 20 MPa, larval motor ability was suppressed, but not lost. Meanwhile, at a pressure of > 40 MPa, some of the larval motor ability was lost without recovery after decompression. For all experiments, discordance of movement and timing between right and left appendages, was observed at pressures of > 20 MPa. Our results indicate that the limit of pressure for sustaining active behavior of A. franciscana larvae is ∼20 MPa, whereas the limit of pressure for survival is within the range 30-60 MPa. Thus, members of the genus Artemia possess the ability to resist a higher range of pressures than their natural habitat depth. Our findings demonstrated an example of an organism capable of invading deeper environment in terms of physical pressure tolerance, and indicate the need and importance of pressure study as an experimental method.

Genes required for growth at high hydrostatic pressure in Escherichia coli K-12 identified by genome-wide screening

Despite the fact that much of the global microbial biosphere is believed to exist in high pressure environments, the effects of hydrostatic pressure on microbial physiology remain poorly understood. We use a genome-wide screening approach, combined with a novel high-throughput high-pressure cell culture method, to investigate the effects of hydrostatic pressure on microbial physiology in vivo. The Keio collection of single-gene deletion mutants in Escherichia coli K-12 was screened for growth at a range of pressures from 0.1 MPa to 60 MPa. This led to the identification of 6 genes, rodZ, holC, priA, dnaT, dedD and tatC, whose products were required for growth at 30 MPa and a further 3 genes, tolB, rffT and iscS, whose products were required for growth at 40 MPa. Our results support the view that the effects of pressure on cell physiology are pleiotropic, with DNA replication, cell division, the cytoskeleton and cell envelope physiology all being potential failure points for cell physiology during growth at elevated pressure.

Induction of rice mutations by high hydrostatic pressure

High hydrostatic pressure (HHP) is an extreme thermo-physical factor that affects the synthesis of DNA, RNA and proteins and induces mutagenesis in microorganisms. Our previous studies showed that exposure to 25-100 MPa HHP for 12 h retarded the germination and affected the viability of rice (Oryza sativa L.) seeds, increased the tolerance of rice plants to cold stress and altered gene expression patterns in germinating rice seeds. However, the mutagenic effect of HHP on rice remains unknown. In this study, exposure to 25, 50, 75 or 100 MPa for 12 h HHP could efficiently induce variation in rice plants. Furthermore, presoaking time and HHP strength during HHP treatment affected the efficiency of mutation. In addition, the Comet assay revealed that exposure to 25-100 MPa HHP for 12 h induced DNA strand breakage in germinating seeds and may have been the source of mutations. Our results suggest that HHP is a promising physical mutagen in rice breeding.

High hydrostatic pressure induces counterclockwise to clockwise reversals of the Escherichia coli flagellar motor

The bacterial flagellar motor is a reversible rotary machine that rotates a left-handed helical filament, allowing bacteria to swim toward a more favorable environment. The direction of rotation reverses from counterclockwise (CCW) to clockwise (CW), and vice versa, in response to input from the chemotaxis signaling circuit. CW rotation is normally caused by binding of the phosphorylated response regulator CheY (CheY-P), and strains lacking CheY are typically locked in CCW rotation. The detailed mechanism of switching remains unresolved because it is technically difficult to regulate the level of CheY-P within the concentration range that produces flagellar reversals. Here, we demonstrate that high hydrostatic pressure can induce CW rotation even in the absence of CheY-P. The rotation of single flagellar motors in Escherichia coli cells with the cheY gene deleted was monitored at various pressures and temperatures. Application of >120 MPa pressure induced a reversal from CCW to CW at 20°C, although at that temperature, no motor rotated CW at ambient pressure (0.1 MPa). At lower temperatures, pressure-induced changes in direction were observed at pressures of <120 MPa. CW rotation increased with pressure in a sigmoidal fashion, as it does in response to increasing concentrations of CheY-P. Application of pressure generally promotes the formation of clusters of ordered water molecules on the surfaces of proteins. It is possible that hydration of the switch complex at high pressure induces structural changes similar to those caused by the binding of CheY-P.

Microscopic analysis of bacterial motility at high pressure

The bacterial flagellar motor is a molecular machine that converts an ion flux to the rotation of a helical flagellar filament. Counterclockwise rotation of the filaments allows them to join in a bundle and propel the cell forward. Loss of motility can be caused by environmental factors such as temperature, pH, and solvation. Hydrostatic pressure is also a physical inhibitor of bacterial motility, but the detailed mechanism of this inhibition is still unknown. Here, we developed a high-pressure microscope that enables us to acquire high-resolution microscopic images, regardless of applied pressures. We also characterized the pressure dependence of the motility of swimming Escherichia coli cells and the rotation of single flagellar motors. The fraction and speed of swimming cells decreased with increased pressure. At 80 MPa, all cells stopped swimming and simply diffused in solution. After the release of pressure, most cells immediately recovered their initial motility. Direct observation of the motility of single flagellar motors revealed that at 80 MPa, the motors generate torque that should be sufficient to join rotating filaments in a bundle. The discrepancy in the behavior of free swimming cells and individual motors could be due to the applied pressure inhibiting the formation of rotating filament bundles that can propel the cell body in an aqueous environment.

Bacterial motility measured by a miniature chamber for high-pressure microscopy

Hydrostatic pressure is one of the physical stimuli that characterize the environment of living matter. Many microorganisms thrive under high pressure and may even physically or geochemically require this extreme environmental condition. In contrast, application of pressure is detrimental to most life on Earth; especially to living organisms under ambient pressure conditions. To study the mechanism of how living things adapt to high-pressure conditions, it is necessary to monitor directly the organism of interest under various pressure conditions. Here, we report a miniature chamber for high-pressure microscopy. The chamber was equipped with a built-in separator, in which water pressure was properly transduced to that of the sample solution. The apparatus developed could apply pressure up to 150 MPa, and enabled us to acquire bright-field and epifluorescence images at various pressures and temperatures. We demonstrated that the application of pressure acted directly and reversibly on the swimming motility of Escherichia coli cells. The present technique should be applicable to a wide range of dynamic biological processes that depend on applied pressures.

Microbial growth at hyperaccelerations up to 403,627 x g

It is well known that prokaryotic life can withstand extremes of temperature, pH, pressure, and radiation. Little is known about the proliferation of prokaryotic life under conditions of hyperacceleration attributable to extreme gravity, however. We found that living organisms can be surprisingly proliferative during hyperacceleration. In tests reported here, a variety of microorganisms, including Gram-negative Escherichia coli, Paracoccus denitrificans, and Shewanella amazonensis; Gram-positive Lactobacillus delbrueckii; and eukaryotic Saccharomyces cerevisiae, were cultured while being subjected to hyperaccelerative conditions. We observed and quantified robust cellular growth in these cultures across a wide range of hyperacceleration values. Most notably, the organisms P. denitrificans and E. coli were able to proliferate even at 403,627 × g. Analysis shows that the small size of prokaryotic cells is essential for their proliferation under conditions of hyperacceleration. Our results indicate that microorganisms cannot only survive during hyperacceleration but can display such robust proliferative behavior that the habitability of extraterrestrial environments must not be limited by gravity.

Favourable effects of eicosapentaenoic acid on the late step of the cell division in a piezophilic bacterium, Shewanella violacea DSS12, at high-hydrostatic pressures

Shewanella violacea DSS12, a deep-sea bacterium, produces eicosapentaenoic acid (EPA) as a component of membrane phospholipids. Although various isolates from the deep sea, such as Photobacterium profundum SS9, Colwellia psychrerythraea 34H and various Shewanella strains, produce EPA- or docosahexaenoic acid-containing phospholipids, the physiological role of these polyunsaturated fatty acids remains unclear. In this article, we illustrate the physiological importance of EPA for high-pressure adaptation in strain DSS12 with the help of an EPA-deficient mutant (DSS12(pfaA)). DSS12(pfaA) showed significant growth retardation at 30 MPa, but not at 0.1 MPa. We also found that DSS12(pfaA) grown at 30 MPa forms filamentous cells. When an EPA-containing phospholipid (sn-1-oleoly-sn-2-eicosapentaenoyl phosphatidylethanolamine) was supplemented, the growth retardation and the morphological defect of DSS12(pfaA) were suppressed, indicating that the externally added EPA-containing phospholipid compensated for the loss of endogenous EPA. In contrast, the addition of an oleic acid-containing phospholipid (sn-1,2-dioleoyl phosphatidylethanolamine) did not affect the growth and the morphology of the cells. Immunofluorescent microscopic analysis with anti-FtsZ antibody revealed a number of Z-rings and separated nucleoids in DSS12(pfaA) grown at 30 MPa. These results demonstrate the physiological importance of EPA for the later step of Z-ring formation of S. violacea DSS12 under high-pressure conditions.

Novel listerial genetic loci conferring enhanced barotolerance in Escherichia coli

AIMS

To identify Listeria monocytogenes genes with a role in high-pressure (HP) resistance.

METHODS AND RESULTS

A L. monocytogenes genomic library constructed in an Escherichia coli background was screened for loci conferring increased HP resistance. Pressure treatments at 400 megapascals for 5 min in Luria-Bertani (LB) agar were used to screen for increased resistance to pressure. Colonies arising on the treated agar plates were isolated, the plasmid extracted and the inserts sequenced to identify the genetic loci conferring HP resistance. Seven different genetic regions were identified, which encoded proteins similar to an inorganic polyphosphate/ATP-NAD kinase, the septation ring formation regulator EzrA, flagellar motor proteins MotA and MotB, proteins similar to the quorum sensing Agr system from Staphylococcus (AgrA, AgrC and AgrD), proteins similar to a transcription regulator (RpiR family) and a fructose phosphotransferase system, proteins of unknown function, and a Fur regulator. Of the seven loci confirmed, three (EzrA, MotA/B and the Agr system) maintained significantly reproducible HP tolerance when expressed in a different E. coli background.

CONCLUSIONS

Novel genetic loci from the L. monocytogenes genome confer increased HP resistance when heterologously expressed in an E. coli background.

SIGNIFICANCE AND IMPACT OF THE STUDY

Molecular and functional approaches to the screening of genetic elements linked to HP resistance provide greater insights into microbial inactivation and/or survival mechanisms when using HP as a means of controlling/eliminating bacterial growth. This information will ultimately have significant implications for the use of HP processing in the food industry, in terms of both food quality and safety.

A multipurpose modular system for high-resolution microscopy at high hydrostatic pressure

We have developed a modular system for high-resolution microscopy at high hydrostatic pressure. The system consists of a pressurized cell of volume approximately 100 microl, a temperature controlled holder, a ram, and a piston. We have made each of these components in several versions which can be interchanged to allow a wide range of applications. Here, we report two pressure cells with pressure ranges 0.1-700 MPa and 0.1-100 MPa, which can be combined with hollow or solid rams and pistons. Our system is designed to work with fluorescent samples (using a confocal or epifluorescence microscope), but also allows for transmitted light microscopy via the hollow ram and piston. The system allows precise control of pressure and temperature (-20 to 70 degrees C), as well as rapid pressure quenching. We demonstrate its performance and versatility with two applications: time-resolved imaging of colloidal phase transitions caused by pressure changes between 0.1 and 100 MPa, and imaging the growth of Escherichia coli bacteria at 50 MPa. We also show that the isotropic-nematic phase transition of pentyl-cyanobiphenyl (5CB) liquid crystal provides a simple, convenient, and accurate method for calibrating pressure in the range 0.1-200 MPa.

Introduction to high-pressure bioscience and biotechnology

The manipulation of biological materials using elevated pressure is providing an ever-growing number of opportunities in both the applied and basic sciences. Manipulation of pressure is a useful parameter for enhancing food quality and shelf life; inactivating microbes, viruses, prions, and deleterious enzymes; affecting recombinant protein production; controlling DNA hybridization; and improving vaccine preparation. In biophysics and biochemistry, pressure is used as a tool to study intermediates in protein folding, enzyme kinetics, macromolecular interactions, amyloid fibrous protein aggregation, lipid structural changes, and to discern the role of solvation and void volumes in these processes. Biologists, including many microbiologists, examine the utility and basis of pressure inactivation of cells and cellular processes, and conversely seek to discover how deep-sea life has evolved a preference for high-pressure environments. This introduction and the papers that follow provide information on the nature and promise of the highly interdisciplinary field of high-pressure bioscience and biotechnology (HPBB).

Viability and cellulose synthesizing ability of Gluconacetobacter xylinus cells under high-hydrostatic pressure

The effect of pressure on viability and the synthesis of bacterial cellulose (BC) by Gluconacetobacter xylinus ATCC53582 were investigated. G. xylinus was statically cultivated in a pressurized vessel under 0.1, 30, 60, and 100 MPa at 25 degrees C for 6 days. G. xylinus cells remained viable and retained cellulose producing ability under all the conditions tested, though the production of cellulose decreased with increasing the pressure. The BCs produced at each pressure condition were analyzed by field emission scanning electron microscopy (FE-SEM) and Fourier Transform Infrared (FT-IR). FE-SEM revealed that the widths of BC fibers produced under high pressure decreased as compared with those produced under the atmospheric pressure. By FT-IR, all the BCs were found to be of Cellulose type I, as the same as typical native cellulose. Our findings evidently showed that G. xylinus possessed a piezotolerant (barotolerant) feature adapting to 100 MPa without losing its BC producing ability. This was the first attempt in synthesizing BC with G. xylinus under elevated pressure of 100 MPa, which corresponded to the deep sea at 10,000 m.

Prokaryotic lifestyles in deep sea habitats

Gradients of physicochemical factors influence the growth and survival of life in deep-sea environments. Insights into the characteristics of deep marine prokaryotes has greatly benefited from recent progress in whole genome and metagenome sequence analyses. Here we review the current state-of-the-art of deep-sea microbial genomics. Ongoing and future genome-enabled studies will allow for a better understanding of deep-sea evolution, physiology, biochemistry, community structure and nutrient cycling.