Using Photocatalyst Metal Oxides as Antimicrobial Surface Coatings to Ensure Food Safety-Opportunities and Challenges

Green synthesis of tellurium-doped SnO2 nanoparticles with sulfurized g-C3 N4 : Insights into methylene blue photodegradation and antibacterial capability

The construction of SnO2 nanoparticles (NPs), specifically Te-doped SnO2 NPs, using a simple and economical co-precipitation technique has been thoroughly described in this work. NH3 served as the reducing agent in this procedure, whilst polyethylene glycol served as the capping agent. The primary goals of our work were to investigate the physicochemical properties of the synthesized SnO2 NPs and assess their potential use as antibacterial agents and photocatalysts. Scanning electron microscopy-energy dispersive X-ray, ultraviolet light, Fourier transform infrared spectroscopy, X-ray diffraction (XRD), and other analytical techniques were used to thoroughly analyze the NPs. Based on the full width at half maximum of the most noticeable peaks in the XRD spectrum, the Debye-Scherrer equation was used to calculate the crystallite sizes, which indicated the presence of a single tetragonal SnO2 phase. Particularly noteworthy was the exceptional photocatalytic activity of graphene-assisted Te-doped SnO2 NPs, achieving an impressive decomposition efficiency of up to 98% in the photo-oxidation of methylene blue. Furthermore, our investigation delved into the antibacterial attributes of the synthesized SnO2 NPs against Escherichia coli and Staphylococcus aureus, demonstrating inhibitory effects on both bacteria strains. This suggests potential applications for these NPs in various environmental and medical contexts.

Antiviral and Antibacterial 3D-Printed Products Functionalised with Poly(hexamethylene biguanide)

Infection prevention and public health are a vital concern worldwide, especially during pandemics such as COVID-19 and seasonal influenza. Frequent manual disinfection and use of chemical spray coatings at public facilities are the typical measures taken to protect people from coronaviruses and other pathogens. However, limitations of human resources and coating durability, as well as the safety of disinfectants used are the major concerns in society during a pandemic. Non-leachable antimicrobial agent poly(hexamethylene biguanide) (PHMB) was mixed into photocurable liquid resins to produce novel and tailor-made covers for public facilities via digital light processing, which is a popular 3D printing technique for satisfactory printing resolution. Potent efficacies of the 3D-printed plastics were achieved in standard antibacterial assessments against S. aureus, E. coli and K. pneumoniae. A total of 99.9% of Human coronavirus 229E was killed after being in contact with the 3D-printed samples (containing the promising PHMB formulation) for two hours. In an eight-week field test in Hong Kong Wetland Park, antibacterial performances of the specially designed 3D-printed covers analysed by environmental swabbing were also found to be satisfactory. With these remarkable outcomes, antimicrobial products prepared by digital light processing 3D printing can be regarded as a reliable solution to long-term infection prevention and control.

Photocatalytic Antimicrobials: Principles, Design Strategies, and Applications

Nowadays, the increasing emergence of antibiotic-resistant pathogenic microorganisms requires the search for alternative methods that do not cause drug resistance. Phototherapy strategies (PTs) based on the photoresponsive materials have become a new trend in the inactivation of pathogenic microorganisms due to their spatiotemporal controllability and negligible side effects. Among those phototherapy strategies, photocatalytic antimicrobial therapy (PCAT) has emerged as an effective and promising antimicrobial strategy in recent years. In the process of photocatalytic treatment, photocatalytic materials are excited by different wavelengths of lights to produce reactive oxygen species (ROS) or other toxic species for the killing of various pathogenic microbes, such as bacteria, viruses, fungi, parasites, and algae. Therefore, this review timely summarizes the latest progress in the PCAT field, with emphasis on the development of various photocatalytic antimicrobials (PCAMs), the underlying antimicrobial mechanisms, the design strategies, and the multiple practical antimicrobial applications in local infections therapy, personal protective equipment, water purification, antimicrobial coatings, wound dressings, food safety, antibacterial textiles, and air purification. Meanwhile, we also present the challenges and perspectives of widespread practical implementation of PCAT as antimicrobial therapeutics. We hope that as a result of this review, PCAT will flourish and become an effective weapon against pathogenic microorganisms and antibiotic resistance.

Strategies to control mycotoxins and toxigenic fungi contamination by nano-semiconductor in food and agro-food: a review

Mycotoxins are toxic secondary metabolites generated from toxigenic fungi in the contaminated food and agro-food, which have been regarded as a serious threat to the food safety and human health. Therefore, the control of mycotoxins and toxigenic fungi contamination is of great significance and has attracted the increasing attention of researchers. As we know, nano-semiconductors have many unique properties such as large surface area, structural stability, good biocompatibility, excellent photoelectrical properties, and low cost, which have been developed and applied in many research fields. Recently, nano-semiconductors have also been promisingly applied in mitigating or controlling mycotoxins and toxigenic fungi contaminations in food and agro-food. In this review, the type, occurrence, and toxicity of main mycotoxins in food and agro-food were introduced. Then, a variety of strategies to mitigate the mycotoxin contamination based on nano-semiconductors involving mycotoxins detection, inhibition of toxigenic fungi, and mycotoxins degradation were summarized. Finally, the outlook, opportunities, and challenges have prospected in the future for the mitigation of mycotoxins and toxigenic fungi based on nano-semiconductors.

Inactivation of Escherichia coli O157:H7, Salmonella Typhimurium, and Listeria monocytogenes on stainless steel by synergistic effects of tap water-based neutral electrolyzed water and lactic acid

Contaminated food contact surface is one of the most important transmission routes for foodborne pathogens. Stainless steel is one such food-contact surface that is widely used in food-processing environments. The present study aimed to evaluate the synergistic antimicrobial efficacy of a combination of tap water-based neutral electrolyzed water (TNEW) and lactic acid (LA) against the foodborne pathogens Escherichia coli O157:H7, Salmonella Typhimurium, and Listeria monocytogenes on stainless steel. The results revealed that simultaneous treatment with TNEW (ACC of 4.60 mg/L) and 0.1% LA (TNEW-LA) for 5 min resulted in 4.99-, 4.34-, and >5.4- log CFU/cm² reductions in E. coli O157:H7, S. Typhimurium, and L. monocytogenes on stainless steel, respectively. Of these, 4.00-, 3.57-, and >4.76-log CFU/cm² reductions in E. coli O157:H7, S. Typhimurium, and L. monocytogenes, respectively were exclusively attributed to the synergistic action of the combined treatments after factoring out the reductions due to individual treatments. Furthermore, five mechanistic investigations revealed that the key mechanisms underlying the synergistic antibacterial effect of TNEW-LA were reactive oxygen species (ROS) production, cell membrane damage resulting from membrane lipid oxidation, DNA damage, and inactivation of intracellular enzymes. Overall, our findings suggest that the TNEW-LA combination treatment could be effectively used in the sanitization of food processing environments, especially the food contact surfaces, to control major pathogens and enhance food safety.

Effectiveness and Durability of a Quaternary Ammonium Compounds-Based Surface Coating to Reduce Surface Contamination

Foodborne diseases are of major concern as they have a significant impact on public health, both socially and economically. The occurrence of cross-contamination of food in household kitchens is a serious threat and the adoption of safe food practices is of paramount importance. This work aimed to study the effectiveness and durability of a commercial quaternary ammonium compound-based surface coating which, according to the manufacturer, retains its antimicrobial activity for 30 days, and is suitable for all types of hard surfaces for the prevention and/or control of cross-contamination. For that, its antimicrobial efficacy, killing contact time and durability on three different surfaces-polyvinyl chloride, glass, and stainless-steel-against three pathogens-Escherichia coli ATCC 25922, Acinetobacter baumannii ESB260 and Listeria monocytogenes Scott A-were tested according to the current antimicrobial treated surfaces efficacy test (ISO22196:2011). The results showed that the antimicrobial coating was effective against all pathogens with a reduction of >5.0 log CFU/cm² in less than one minute for the three surfaces, but its durability was less than one week on all surfaces cleaned in the usual manner. Additionally, trace amounts (≤0.2 mg/kg) of the antimicrobial coating, which may migrate into food when contacting the surface, did not show cytotoxicity to human colorectal adenocarcinoma cells. The suggested antimicrobial coating has the potential to significantly reduce surface contamination, ensure surface disinfection and reduce the likelihood of cross-contamination in domestic kitchens, although it is less durable than suggested. The use of this technology in household settings is an attractive complement to the existing cleaning protocols and solutions that are already in place.

Nano-biotechnology in tumour and cancerous disease: A perspective review

In recent years, drug manufacturers and researchers have begun to consider the nanobiotechnology approach to improve the drug delivery system for tumour and cancer diseases. In this article, we review current strategies to improve tumour and cancer drug delivery, which mainly focuses on sustaining biocompatibility, biodistribution, and active targeting. The conventional therapy using cornerstone drugs such as fludarabine, cisplatin etoposide, and paclitaxel has its own challenges especially not being able to discriminate between tumour versus normal cells which eventually led to toxicity and side effects in the patients. In contrast to the conventional approach, nanoparticle-based drug delivery provides target-specific delivery and controlled release of the drug, which provides a better therapeutic window for treatment options by focusing on the eradication of diseased cells via active targeting and sparing normal cells via passive targeting. Additionally, treatment of tumours associated with the brain is hampered by the impermeability of the blood-brain barriers to the drugs, which eventually led to poor survival in the patients. Nanoparticle-based therapy offers superior delivery of drugs to the target by breaching the blood-brain barriers. Herein, we provide an overview of the properties of nanoparticles that are crucial for nanotechnology applications. We address the potential future applications of nanobiotechnology targeting specific or desired areas. In particular, the use of nanomaterials, biostructures, and drug delivery methods for the targeted treatment of tumours and cancer are explored.

Antimicrobial materials for endotracheal tubes: A review on the last two decades of technological progress

Ventilator-associated pneumonia (VAP) is an unresolved problem in nosocomial settings, remaining consistently associated with a lack of treatment, high mortality, and prolonged hospital stay. The endotracheal tube (ETT) is the major culprit for VAP development owing to its early surface microbial colonization and biofilm formation by multiple pathogens, both critical events for VAP pathogenesis and relapses. To combat this matter, gradual research on antimicrobial ETT surface coating/modification approaches has been made. This review provides an overview of the relevance and implications of the ETT bioburden for VAP pathogenesis and how technological research on antimicrobial materials for ETTs has evolved. Firstly, certain main VAP attributes (definition/categorization; outcomes; economic impact) were outlined, highlighting the issues in defining/diagnosing VAP that often difficult VAP early- and late-onset differentiation, and that generate misinterpretations in VAP surveillance and discrepant outcomes. The central role of the ETT microbial colonization and subsequent biofilm formation as fundamental contributors to VAP pathogenesis was then underscored, in parallel with the uncovering of the polymicrobial ecosystem of VAP-related infections. Secondly, the latest technological developments (reported since 2002) on materials able to endow the ETT surface with active antimicrobial and/or passive antifouling properties were annotated, being further subject to critical scrutiny concerning their potentialities and/or constraints in reducing ETT bioburden and the risk of VAP while retaining/improving the safety of use. Taking those gaps/challenges into consideration, we discussed potential avenues that may assist upcoming advances in the field to tackle VAP rampant rates and improve patient care. STATEMENT OF SIGNIFICANCE: The use of the endotracheal tube (ETT) in patients requiring mechanical ventilation is associated with the development of ventilator-associated pneumonia (VAP). Its rapid surface colonization and biofilm formation are critical events for VAP pathogenesis and relapses. This review provides a comprehensive overview on the relevance/implications of the ETT biofilm in VAP, and on how research on antimicrobial ETT surface coating/modification technology has evolved over the last two decades. Despite significant technological advances, the limited number of gathered reports (46), highlights difficulty in overcoming certain hurdles associated with VAP (e.g., persistent colonization/biofilm formation; mechanical ventilation duration; hospital length of stay; VAP occurrence), which makes this an evolving, complex, and challenging matter. Challenges and opportunities in the field are discussed.

Antibacterial features of material surface: strong enough to serve as antibiotics?

Bacteria are small but need big efforts to control. The use of antibiotics not only produces superbugs that are increasingly difficult to inactivate, but also raises environmental concerns with the growing consumption. It is now believed that the antibacterial task can count on some physiochemical features of material surfaces, which can be anti-adhesive or bactericidal without releasing toxicants. It is necessary to evaluate to what extent can we rely on the surface design since the actual application scenarios will need the antibacterial performance to be sharp, robust, environmentally friendly, and long-lasting. Herein, we review the recent laboratory advances that have been classified based on the specific surface features, including hydrophobicity, charge potential, micromorphology, stiffness and viscosity, and photoactivity, and the antibacterial mechanisms of each feature are included to provide a basic rationale for future design. The significance of anti-biofilms is also introduced, given the big role of biofilms in bacteria-caused damage. A perspective on the potential wide application of antibacterial surface features as a substitute or supplement to antibiotics is then discussed. Surface design is no doubt a solution worthy to explore, and future success will be a result of further progress in multiple directions, including mechanism study and material preparation.

Anodic TiO2 Nanotube Layers for Wastewater and Air Treatments: Assessment of Performance Using Sulfamethoxazole Degradation and N2O Reduction

The preparation of anodic TiO₂ nanotube layers has been performed using electrochemical anodization of Ti foil for 4 h at different voltages (from 0 V to 80 V). In addition, a TiO₂ thin layer has been also prepared using the sol-gel method. All the photocatalysts have been characterized by XRD, SEM, and DRS to investigate the crystalline phase composition, the surface morphology, and the optical properties, respectively. The performance of the photocatalyst has been assessed in versatile photocatalytic reactions including the reduction of N₂O gas and the oxidation of aqueous sulfamethoxazole. Due to their high specific surface area and excellent charge carriers transport, anodic TiO₂ nanotube layers have exhibited the highest N₂O conversion rate (up to 10% after 22 h) and the highest degradation extent of sulfamethoxazole (about 65% after 4 h) under UVA light. The degradation mechanism of sulfamethoxazole has been investigated by analyzing its transformation products by LC-MS and the predominant role of hydroxyl radicals has been confirmed. Finally, the efficiency of the anodic TiO₂ nanotube layer has been tested in real wastewater reaching up to 45% of sulfamethoxazole degradation after 4 h.

ZnO-based antimicrobial coatings for biomedical applications

Rapid transmission of infectious microorganisms such as viruses and bacteria through person-to-person contact has contributed significantly to global health issues. The high survivability of these microorganisms on the material surface enumerates their transmissibility to the susceptible patient. The antimicrobial coating has emerged as one of the most interesting technologies to prevent growth and subsequently kill disease-causing microorganisms. It offers an effective solution a non-invasive, low-cost, easy-in-use, side-effect-free, and environmentally friendly method to prevent nosocomial infection. Among antimicrobial coating, zinc oxide (ZnO) stands as one of the excellent materials owing to zero toxicity, high biocompatibility to human organs, good stability, high abundancy, affordability, and high photocatalytic performance to kill various infectious pathogens. Therefore, this review provides the latest research progress on advanced applications of ZnO nanostructure-based antibacterial coatings for medical devices, biomedical applications, and health care facilities. Finally, future challenges and clinical practices of ZnO-based antibacterial coating are addressed.

Surface Inactivation of Human Coronavirus by MACOMA™ UVA-TiO2 Coupled Photocatalytic Disinfection System

There is an immense healthcare challenge and financial pressure due to the COVID-19 pandemic caused by a newly identified human coronavirus, SARS-CoV-2. Effective COVID-19 prevention efforts in healthcare, home, and community settings highlight the need for rapid, efficient, and no-contact SARS-CoV-2 inactivation strategies. Here, we examined the photocatalytic and virucidal activity of the MACOMA™ TiO2 photocatalytic film activated by an UVA-LED-12V-367 nm (MA-717836-1) lamp against the HCoV-OC43, a member of the beta coronaviruses family, like SARS-CoV-2, using quantitative RT-qPCR and virus infectivity assays. The UVA radiation-responsive TiO2 film accelerated virus inactivation (decreased viral titer) compared to the uncoated glass surface when placed at a vertical distance of 1.2 feet (~14 inches) from virus samples for 10, 30, and 60 min. UVA-LED exposure for both 10 and 30 min effectively reduced the viral RNA copies and the infectious virus in samples on TiO2-coated surfaces compared to the control surfaces. Importantly, a 60 min exposure of samples on the TiO2 completely eliminated HCoV-OC43. These results confirmed that the MACOMA™ UVA/TiO2-based disinfection system provides a rapid and complete surface inactivation of tested human coronavirus in a human-safe manner and has great potential for limiting the virus spread in poorly ventilated as well as high-traffic public places.

Visible-Light Active Flexible and Durable Photocatalytic Antibacterial Ethylene-co-vinyl Acetate-Ag/AgCl/α-Fe2O3 Composite Coating

When particles are mixed in polymer, particle surfaces become passivated by polymer matrix, leading to significantly reduced photocatalytic and, thus, also reduced antibacterial activity, as the catalytic particles become isolated from the outer environment and microorganisms reaching the surface. Herein, we demonstrate a facile and rapid approach for coating preparation at room temperature, yielding good adhesion of particles in combination with the particles’ interface location. Flexible ethylene-co-vinyl acetate Ag/AgCl/α-Fe₂O₃ composite coatings were prepared by the spin-coating method. The synthesized photocatalytically active coating surface exhibited a distinct and rapid inhibition of bacterial growth, with at least a 7-log reduction of gram-positive bacteria Staphylococcus aureus viability after 30 min of visible-light illumination. We also analyzed the shedding of the Ag-ions and reactive oxygen species production from the composite coating and showed that reactive oxygen species played the main role in the photocatalytic bacterial inactivation, destroying the bacteria cell as proven by the Confocal Laser Scanning Microscopy.

Zinc associated nanomaterials and their intervention in emerging respiratory viruses: Journey to the field of biomedicine and biomaterials

Respiratory viruses represent a severe public health risk worldwide, and the research contribution to tackle the current pandemic caused by the SARS-CoV-2 is one of the main targets among the scientific community. In this regard, experts from different fields have gathered to confront this catastrophic pandemic. This review illustrates how nanotechnology intervention could be valuable in solving this difficult situation, and the state of the art of Zn-based nanostructures are discussed in detail. For virus detection, learning from the experience of other respiratory viruses such as influenza, the potential use of Zn nanomaterials as suitable sensing platforms to recognize the S1 spike protein in SARS-CoV-2 are shown. Furthermore, a discussion about the antiviral mechanisms reported for ZnO nanostructures is included, which can help develop surface disinfectants and protective coatings. At the same time, the properties of Zn-based materials as supplements for reducing viral activity and the recovery of infected patients are illustrated. Within the scope of noble adjuvants to improve the immune response, the ZnO NPs properties as immunomodulators are explained, and potential prototypes of nanoengineered particles with metallic cations (like Zn2+) are suggested. Therefore, using Zn-associated nanomaterials from detection to disinfection, supplementation, and immunomodulation opens a wide area of opportunities to combat these emerging respiratory viruses. Finally, the attractive properties of these nanomaterials can be extrapolated to new clinical challenges.

Current perspective in metal oxide based photocatalysts for virus disinfection: A review

Nanotechnology holds huge potential for the prevention of various viral outbreaks that have increased at a disquieting rate over the past decades. Metal oxide nanomaterials with oxidative capability are the effective materials that provide platforms as well as tools for the well understanding of the mechanism, its detection, and treatment of various viral diseases like measles, influenza, herpes, ebola, current COVID-19 etc. In this inclusive review, we survey various previous research articles on different notable photoactive transition metal oxides that possess enough potential to act as antiviral agents for the deactivation of harmful viruses. We investigated and highlighted the plausible photocatalytic oxidative mechanism of photoactive transition metal oxides in degrading viral coatings, genomic RNA using suitable free radical generation. The key finding of the present review article including the discovery of a vision on the suitable photocatalytic transition metal oxides that have been proven to be excellent against harmful viruses and consequently combatting deadly CoV-2 in the environment. This review intends to provide conclusive remarks and a realistic outlook on other advanced photocatalytic metal oxides as a potential solution in battling other similar upcoming pandemics.

Enhanced Photocatalytic and Photokilling Activities of Cu-Doped TiO2 Nanoparticles

In this work, metal-doped titanium dioxide (TiO₂) was synthesised with the aim of improving photocatalytic degradation and antimicrobial activities; TiO₂ was doped with copper (Cu) ranging from 0.1 to 1.0 wt%. The physical and chemical properties of the Cu-doped TiO₂ nanoparticles were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), the Brunauer–Emmett–Teller method (BET) and diffuse reflection spectroscopy (DRS). The results revealed that the anatase phase of TiO₂ was maintained well in all the Cu-doped TiO₂ samples. No significant difference in the particle sizes or the specific surface areas was caused by increasing Cu doping. However, the band gap decreased continuously from 3.20 eV for undoped TiO₂ to 3.12 eV for 1.0 wt.% Cu-doped TiO₂. In addition, the 0.1 wt.% Cu-doped TiO₂ displayed a much greater photocatalytic degradation of methylene blue (MB) and excellent antibacterial ability for Escherichia coli (E. coli) compared to undoped TiO₂. On the other hand, the high Cu doping levels had negative impacts on the surface charge of nanoparticles and charge transfer for OH• generation, resulting in decreasing MB degradation and E. coli photokilling for 1.0 wt.% Cu-doped TiO₂.

Synthesis and Investigation of Antibacterial Activity of Thin Films Based on TiO2-Ag and SiO2-Ag with Potential Applications in Medical Environment

Multiple antibiotic resistance has now become a major obstacle to the treatment of infectious diseases. In this context, the application of nanotechnology in medicine is a promising alternative for the prevention of infections with multidrug-resistant germs. The use of silver as a powerful antibacterial agent has attracted much interest. TiO2 and SiO2 thin films enhanced with Ag particles have been developed with the aim of maintaining the transparency of the polymer films. Antibacterial activity was evaluated for a Gram-negative species-Escherichia coli-in concentrations of 105 and 104 CFU/mL in different conditions-activation by UV irradiation, single layer and double layer. Increased antibacterial efficacy of TiO2-deposited foil was found for the tests that had been exposed to UV activation. In the case of bilayer tests, the efficiency was higher compared to those in a single layer, as the contact surface between the films and the bacterial suspension increased. Films can be used as a potential method to limit bacterial growth on hospital surfaces, such as telephone screens and medical equipment, given their optimized characteristics and proven antibacterial efficacy.

Enhanced antibacterial properties on superhydrophobic micro-nano structured titanium surface

Micro/nano scale surface modifications of titanium based orthopedic and cardiovascular implants has shown to augment biocompatibility. However, bacterial infection remains a serious concern for implant failure, aggravated by increasing antibiotic resistance and over usage of antibiotics. Bacteria cell adhesion on implant surface leads to colonization and biofilm formation resulting in morbidity and mortality. Hence, there is a need to develop new implant surfaces with high antibacterial properties. Recent developments have shown that superhydrophobic surfaces prevent protein and bacteria cell adhesion. In this study, a thermochemical treatment was used modify the surface properties for high efficacy antibacterial activity on titanium surface. The modification led to a micro-nano surface topography and upon modification with polyethylene glycol (PEG) and silane the surfaces were superhydrophilic and superhydrophobic, respectively. The modified surfaces were characterized for morphology, wettability, chemistry, corrosion resistance and surface charge. The antibacterial capability was characterized with Staphylococcus aureus and Escherichia coli by evaluating the bacteria cell inhibition, adhesion kinetics, and biofilm formation. The results indicated that the superhydrophobic micro-nano structured titanium surface reduced bacteria cell adhesion significantly (>90%) and prevented biofilm formation compared to the unmodified titanium surface after 24 h of incubation.

Insight on Photocatalytic and Photoinduced Antimicrobial Properties of ZnO Thin Films Deposited by HiPIMS through Thermal Oxidation

Zinc oxide thin films have been developed through thermal oxidation of Zinc thin films grown by high impulse power magnetron sputtering (HiPIMS). The influence of various sputtering power on thin film structural, morphological, photocatalytic, and antimicrobial properties was investigated. X-ray diffraction (XRD) analysis confirmed that the crystalline phase of ZnO thin films consists of a hexagonal wurtzite structure. Increasing the sputtering power will lead to intrinsic stress on thin films that promote whisker formation. In this study, whiskers were successfully developed on the thin films without precursors/catalysts and not thermally treated over the Zn melting point. This finding showed that the film phase structure and morphology are significantly affected by sputtering power. It was found that ZnO thin films exhibit high photocatalytic performance under UV irradiation (89.91%) of methylene blue after 300 min of irradiation. The antimicrobial activity on ZnO thin films showed significant inhibition activity (p < 0.05) against E. coli, S. aureus, and C. albicans. However, the whisker formation on ZnO thin films is not accessible to enhance photocatalytic and antimicrobial activity. This study demonstrates that the HiPIMS method through the thermal oxidation process can promote a good performance of ZnO thin films as photocatalyst and antimicrobial agents.

Insight into the Photocatalytic Activity of Cobalt-Based Metal–Organic Frameworks and Their Composites

Nowadays, materials with great potential for environmental protection are being sought. Metal–organic frameworks, in particular those with cobalt species as active sites, have drawn considerable interest due to their excellent properties. This review focuses on describing cobalt-based MOFs in the context of light-triggered processes, including dye degradation, water oxidation and splitting, carbon dioxide reduction, in addition to the oxidation of organic compounds. With the use of Co-based MOFs (e.g., ZIF-67, Co-MOF-74) as photocatalysts in these reactions, even over 90% degradation efficiencies of various dyes (e.g., methylene blue) can be achieved. Co-based MOFs also show high TOF/TON values in water splitting processes and CO2-to-CO conversion. Additionally, the majority of alcohols may be converted to aldehydes with efficiencies exceeding 90% and high selectivity. Since Co-based MOFs are effective photocatalysts, they can be applied in the elimination of toxic contaminants that endanger the environment.

Chitosan-based nanocomposite films incorporated with NiO nanoparticles: Physicochemical, photocatalytic and antimicrobial properties

The aim of this research was to fabricate active nanocomposite films by incorporation of nickel oxide nanoparticles (NiONPs) (3, 6 and 9% w/w) into the chitosan-based films. The NiONPs were synthesized by solution combustion method and the films were prepared by solvent casting method. The formation of new interactions and increasing of films' crystallinity were confirmed by FT-IR and XRD analyses. Uniform dispersion of NiONPs at lower concentrations and their aggregation at level of 9% was confirmed by FE-SEM observations. Water barrier properties, tensile strength, thermal properties and surface hydrophobicity of films enhanced by addition of 6% NiONPs. Photocatalytic activity of nanocomposites was confirmed by absorption of 72% of methyl orange during 270 min under UV irradiation. The nanocomposite films exhibited good antibacterial activity against gram-positive (S. aureus) and gram-negative (S. typhimurium) bacteria. Therefore, the chitosan-NiONPs nanocomposite films could be used for active food packaging applications and photodecolorization purposes.

Incorporation of Antimicrobial Bio-Based Carriers onto Poly(vinyl alcohol-co-ethylene) Surface for Enhanced Antimicrobial Activity

A biobased rechargeable antimicrobial modification approach was developed using a covalent immobilization of food grade yeast cell wall particles on a model plastic film. We demonstrate the applications of this modification approach on poly(vinyl alcohol-co-ethylene) surface to inactivate inoculated bacteria with or without the presence of organic content, reducing the cross-contamination between food contact surface and model fresh produce, and inhibiting the growth of biofilms on the film surface. These biobased cell wall particle modified plastic films can enhance the binding of chlorine to the plastic surface in the form of N-halamine, extend the stability of chlorine against high organic content and ambient storage, and improve the rechargeability of the plastic films. Upon charging with chlorine, these modified plastic films inactivated 5 log of model Gram-negative bacteria (Escherichia coli O157:H7) and Gram-positive bacteria (Listeria innocua used as a surrogate of pathogenic Listeria monocytogenes) within 2 min of surface inoculation in water and within 20 min in an organic-rich aqueous environment. The modified plastic films prevented the transfer of bacteria and eliminated cross-contamination from the contaminated films to a spinach leaf surface, while 3 log CFU/leaf of bacteria were transferred from a contaminated native film to a noninoculated spinach surface. In addition, these modified plastic films reduced the adhesion of L. innocua cells by 2.7-3.6 log CFU/cm² compared with control films during extended incubation for biofilm formation. Overall, this study demonstrates the feasibility of this biobased food grade modification approach to reduce microbial contamination and improve produce safety in the food processing industry.

pH-Triggered nanoreactors as oxidative stress amplifiers for combating multidrug-resistant biofilms

Developing radical oxygen species (ROS)-generating nanoreactors as new "antibiotics" is a promising strategy for the treatment of multidrug-resistant (MDR) biofilm infections. Herein, we designed and fabricated silver nanoparticle-decorated calcium peroxide (CaO2) nanoreactors (CPA) for combating MDR biofilms. CPA could locally boost ROS production as oxidative stress amplifiers in a pH-triggered and self-catalytic manner in acidic biofilms, where H2O2 was released by the hydrolysis of CaO2 and sequentially catalyzed by Ag NPs in situ to generate O2˙-, thereby efficiently disrupting mature biofilms and killing bacteria.

da Costa Filho B, Espíndola JC, Piazza D, J. P. Vilar V, A. Lansarin M. ZnO Polymeric Composite Films for n-Decane Removal from Air Streams in a Continuous Flow NETmix Photoreactor under UVA Light

Polymeric composite films have been explored for many photocatalytic applications, from water treatment to self-cleaning devices. Their properties, namely, thickness and porosity, are controlled mainly by the preparation conditions. However, little has been discussed on the effect of thickness and porosity of polymeric composite films for photocatalytic processes, especially in gas phase. In the present study, different preparation treatments of ZnO-based polymeric composite films and their effects on its performance and stability were investigated. The polymeric composites were prepared by solution mixing followed by non-solvent induced phase separation (NIPS), using poly(vinylidene fluoride) (PVDF) as the matrix and ZnO-based photocatalysts. Different wet thickness, photocatalyst mass, and treatments (e.g., using or not pore-forming agent and compatibilizer) were assessed. A low ZnO/PVDF ratio and higher wet thickness, together with the use of pore-forming agent and compatibilizer, proved to be a good strategy for increasing photocatalytic efficiency given the low agglomerate formation and high polymer transmittance. Nonetheless, the composites exhibited deactivation after several minutes of exposure. Characterization by XRD, FTIR-ATR, and SEM were carried out to further investigate the polymeric film treatments and stability. ZnO film was most likely deactivated due to zinc carbonate formation intensified by the polymer presence.

Activity Enhancement of P25 Titanium Dioxide by Zinc Oxide for Photocatalytic Phenol Degradation

As a benchmark photocatalyst, P25 titanium dioxide (TiO2) nanomaterial has been widely reported for its remarkable photocatalytic activity under ultraviolet (UV) irradiation. However, approaches to further improve the photocatalytic activity of the P25 TiO2 are still required. In the present work, we reported the activity enhancement of the P25 TiO2 up to more than five times higher rate constant for phenol degradation when the P25 TiO2 was coupled with zinc oxide (ZnO). The composites were prepared by a physical mixing method of P25 TiO2 and ZnO with various weight ratios of 1:0.5, 1:1, and 1:2. The composite materials were then characterized using X-ray diffraction (XRD), diffuse-reflectance ultraviolet-visible (DR UV-vis), Fourier transform infrared (FTIR), and fluorescence spectroscopies. All the composites gave better activity than the P25 TiO2, in which the TiO2/ZnO 1:1 composite material exhibited the highest first-order reaction rate constant (0.43 h−1). This remarkable enhanced degradation rate was much higher than that of the unmodified TiO2 (0.08 h−1) and ZnO (0.13 h-1). The fluorescence study revealed that the electron-hole recombination on the P25 TiO2 could be suppressed by the ZnO, which would be the reason for such activity enhancement. A study on the effect of the scavenger showed that the hydroxyl radicals played a crucial role in the photocatalytic phenol degradation. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

The Composites of PCL and Tetranuclear Titanium(IV)-oxo Complexes as Materials Exhibiting the Photocatalytic and the Antimicrobial Activity

Excessive misuse of antibiotics and antimicrobials has led to a spread of microorganisms resistant to most currently used agents. The resulting global threats has driven the search for new materials with optimal antimicrobial activity and their application in various areas of our lives. In our research, we focused on the formation of composite materials produced by the dispersion of titanium(IV)-oxo complexes (TOCs) in poly(ε-caprolactone) (PCL) matrix, which exhibit optimal antimicrobial activity. TOCs, of the general formula [Ti₄O₂(OⁱBu)₁₀(O₂CR’)₂] (R’ = PhNH₂ (1), C₁₃H₉ (2)) were synthesized as a result of the direct reaction of titanium(IV) isobutoxide and 4-aminobenzoic acid or 9-fluorenecarboxylic acid. The microcrystalline powders of (1) and (2), whose structures were confirmed by infrared (IR) and Raman spectroscopy, were dispersed in PCL matrixes. In this way, the composites PCL + nTOCs (n = 5 and 20 wt.%) were produced. The structure and physicochemical properties were determined on the basis of Raman microscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), electron paramagnetic resonance spectroscopy (EPR), and UV–Vis diffuse reflectance spectroscopy (DRS). The degree of TOCs distribution in the polymer matrix was monitored by scanning electron microscopy (SEM). The addition of TOCs micro grains into the PCL matrix only slightly changed the thermal and mechanical properties of the composite compared to the pure PCL. Among the investigated PCL + TOCs systems, promising antibacterial properties were confirmed for samples of PCL + n(2) (n = 5, 20 wt.%) composites, which simultaneously revealed the best photocatalytic activity in the visible range.

Effect of the Photocatalyst under Visible Light Irradiation in SARS-CoV-2 Stability on an Abiotic Surface

There is a worldwide attempt to develop prevention strategies against SARS-CoV-2 transmission. Here we examined the effectiveness of tungsten trioxide (WO₃)-based visible light-responsive photocatalyst on the inactivation of SARS-CoV-2 under different temperatures and exposure durations. The viral titer on the photocatalyst-coated glass slides decreased from 5.93 ± 0.38 logTCID₅₀ /mL to 3.05 ±. 25 logTCID₅₀/mL after exposure to 3,000 lux of the visible light irradiation for 6h at 20℃. On the other hand, lighting without the photocatalyst, or the photocatalyst-coat without lighting retained viral stability. Immunoblotting and electron microscopic analyses showed the reduced amounts of spike protein on the viral surface after the photocatalyst treatment. Our data suggest a possible implication of the photocatalyst on the decontamination of SARS-CoV-2 in indoor environments, thereby preventing indirect viral spread.

Zn(II)-tetracarboxy-phthalocyanine-Sensitized TiO2 Thin Films as Antimicrobial Agents under Visible Irradiation: a Combined DFT and Experimental Study

In this article, we studied the antimicrobial activity of TiO2 sensitized by the Zn(II)-tetracarboxy-phthalocyanine (TcPcZn) complex using TiO2-Degussa P25 as a semiconductor source. The TiO2 thin films were deposited by the doctor blade method and were sensitized by the chemisorption process. The obtained compounds were characterized using Fourier transform infrared spectroscopy, UV-vis spectrophotometry, Raman spectroscopy, diffuse reflectance spectroscopy, and scanning electron microscopy. Furthermore, we studied the stability of the adsorbed sensitizer on the semiconductor surface by using the density functional theory (DFT). Additionally, we determined the antimicrobial activity of TcPcZn-TiO2 against methicillin-resistant Staphylococcus aureus (MRSA). The Raman and optical results confirmed the sensitizing process. The TcPcZn-TiO2 thin films showed radiation absorption in the visible range of the electromagnetic spectrum (600-750 nm), and the dye anchored on the TiO2 surface had a band gap of 1.58 eV. The DFT study showed that TcPcZn supported on any phase of Degussa P25 is stable, making them suitable to act as catalysts in the proposed reactions. Finally, the TcPcZn-TiO2 thin films reached 76.5% of inhibition activity against MRSA.

Antimicrobial-coated films as food packaging: A review

Antimicrobial food packaging involves packaging the foods with antimicrobials to protect them from harmful microorganisms. In general, antimicrobials can be integrated with packaging materials via direct incorporation of antimicrobial agents into polymers or application of antimicrobial coating onto polymer surfaces. The former option is generally achieved through thermal film-making technology such as compression molding or film extrusion, which is primarily suitable for heat-stable antimicrobials. As a nonthermal technology, surface coating is more promising compared to molding or extrusion for manufacturing food packaging containing heat-sensitive antimicrobials. In addition, it also has advantages over direct incorporation to preserve the packaging materials' bulk properties (e.g., mechanical and physical properties) and minimize the amount of antimicrobials to reach sufficient efficacy. Herein, antimicrobial food packaging films achieved through surface coating is explored and discussed. The two components (i.e., film substrate and antimicrobials) consisting of the antimicrobial-coated films are reviewed as plastic/biopolymer films; and synthetic/naturally occurring antimicrobials. Furthermore, special emphasis is given to different coating technologies to deposit antimicrobials onto film substrate. Laboratory coating techniques (e.g., knife coating, bar coating, and spray coating) commonly applied in academic research are introduced briefly, and scalable coating methods (i.e., electrospinning/spraying, gravure roll coating, flexography coating) that have the potential to bring laboratory-developed antimicrobial-coated films to an industrial level are explained in detail. The migration profile, advantages/drawbacks of antimicrobial-coated films for food applications, and quantitative analyses of the reviewed antimicrobial-coated films from different aspects are also covered in this review. A conclusion is made with a discussion of the challenges that remain in bringing the production of antimicrobial-coated films to an industrial level.

Recent developments in antimicrobial and antifouling coatings to reduce or prevent contamination and cross-contamination of food contact surfaces by bacteria

Illness as the result of ingesting bacterially contaminated foodstuffs represents a significant annual loss of human quality of life and economic impact globally. Significant research investment has recently been made in developing new materials that can be used to construct food contacting tools and surfaces that might minimize the risk of cross-contamination of bacteria from one food item to another. This is done to mitigate the spread of bacterial contamination and resultant foodborne illness. Internet-based literature search tools such as Web of Science, Google Scholar, and Scopus were utilized to investigate publishing trends within the last 10 years related to the development of antimicrobial and antifouling surfaces with potential use in food processing applications. Technologies investigated were categorized into four major groups: antimicrobial agent-releasing coatings, contact-based antimicrobial coatings, superhydrophobic antifouling coatings, and repulsion-based antifouling coatings. The advantages for each group and technical challenges remaining before wide-scale implementation were compared. A diverse array of emerging antimicrobial and antifouling technologies were identified, designed to suit a wide range of food contact applications. Although each poses distinct and promising advantages, significant further research investment will likely be required to reliably produce effective materials economically and safely enough to equip large-scale operations such as farms, food processing facilities, and kitchens.

BiOClBr-coated fabrics with enhanced antimicrobial properties under ambient light

This study demonstrates the fabrication of ambient light enabled antimicrobial functional fabrics by coating flower-like bismuth oxyhalide i.e. BiOCl_0.875Br_0.125, with the use of poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA) as binders for improved coating robustness and durability. The uniformity of the microparticles was ensured with simultaneous probe sonication during the stages of crystal nucleation and growth. The polymeric binders not only strongly anchor the particle on the fabric, but also serve as an ultra-thin protective layer on the BiOClBr that mitigates bismuth leaching. The efficacy of inhibiting bacteria was investigated over the BiOClBr-coated fabrics i.e. cotton and polyester, and the results showed that the coated fabrics could effectively inhibit both Gram-positive and Gram-negative bacteria, i.e. S. aureus and E. coli. In comparison with fabrics coated with other photocatalytic materials including bismuth oxide (Bi₂O₃) and zinc oxide (ZnO), an exceptionally better antimicrobial efficacy was observed for BiOClBr-coated fabrics. The BiOClBr-coated cotton showed ∼5.0 and ∼6.8 times higher disinfection efficacy towards E. coli compared to that of ZnO and Bi₂O₃-coated cotton with the same particle weight percentage, respectively. Further elucidation of the probable mechanism by BiOClBr-coated fabrics is related to the excess amount of reactive oxygen species (ROS). Overall, BiOClBr has been shown to be a promising material to fabricate cost-effective antimicrobial functional surfaces for both environmental and biomedical applications e.g. protective laboratory and factory clothing.

Biocide mechanism of highly efficient and stable antimicrobial surfaces based on zinc oxide-reduced graphene oxide photocatalytic coatings

Highly efficient photoactive antimicrobial coatings were obtained using zinc oxide-reduced graphene oxide nanocomposites (ZnO-rGO). Their remarkable antibacterial activity and high stability demonstrated their potential use for photoactive biocide surfaces. The ZnO-rGO nanocomposites were prepared by the sol-gel technique to create photocatalytic surfaces by spin-coating. The coatings were deeply characterised and several tests were performed to assess the antibacterial mechanisms. rGO was homogeneously distributed as thin sheets decorated with ZnO nanoparticles. The surface roughness and the hydrophobicity increased with the incorporation of graphene. The ZnO-rGO coatings exhibited high activity against the Gram-positive bacterium Staphylococcus aureus. The 1 wt% rGO coated surfaces showed the highest antibacterial effect in only a few minutes of illumination with up to 5-log reduction in colony forming units, which remained essentially free of bacterial colonization and biofilm formation. We demonstrated that these coatings impaired the bacterial cells due to cell membrane damage and intracellular oxidative stress produced by the photogenerated reactive-oxygen species (ROS). The enhancement of the ZnO photocatalytic performance upon rGO incorporation is due to the increased detected generation of hydroxyl radicals, attributed to the reduction of electron-hole pair recombination. This intimate contact between both components also conveyed stability against zinc leaching and improved the coating adhesion.

The Removal of Meat Exudate and Escherichia coli from Stainless Steel and Titanium Surfaces with Irregular and Regular Linear Topographies

Bacterial retention and organic fouling on meat preparation surfaces can be influenced by several factors. Surfaces with linear topographies and defined chemistries were used to determine how the orientation of the surface features affected cleaning efficacy. Fine polished (irregular linear) stainless steel (FPSS), titanium coated fine polished (irregular linear) stainless steel (TiFP), and topographically regular, linear titanium coated surfaces (RG) were fouled with Escherichia coli mixed with a meat exudate (which was utilised as a conditioning film). Surfaces were cleaned along or perpendicular to the linear features for one, five, or ten wipes. The bacteria were most easily removed from the titanium coated and regular featured surfaces. The direction of cleaning (along or perpendicular to the surface features) did not influence the amount of bacteria retained, but meat extract was more easily removed from the surfaces when cleaned in the direction along the linear surface features. Following ten cleans, there was no significant difference in the amount of cells or meat exudate retained on the surfaces cleaned in either direction. This study demonstrated that for the E. coli cells, the TiFP and RG surfaces were easiest to clean. However, the direction of the clean was important for the removal of the meat exudate from the surfaces.

Antibacterial and Antiviral Functional Materials: Chemistry and Biological Activity toward Tackling COVID-19-like Pandemics

The ongoing worldwide pandemic due to COVID-19 has created awareness toward ensuring best practices to avoid the spread of microorganisms. In this regard, the research on creating a surface which destroys or inhibits the adherence of microbial/viral entities has gained renewed interest. Although many research reports are available on the antibacterial materials or coatings, there is a relatively small amount of data available on the use of antiviral materials. However, with more research geared toward this area, new information is being added to the literature every day. The combination of antibacterial and antiviral chemical entities represents a potentially path-breaking intervention to mitigate the spread of disease-causing agents. In this review, we have surveyed antibacterial and antiviral materials of various classes such as small-molecule organics, synthetic and biodegradable polymers, silver, TiO2, and copper-derived chemicals. The surface protection mechanisms of the materials against the pathogen colonies are discussed in detail, which highlights the key differences that could determine the parameters that would govern the future development of advanced antibacterial and antiviral materials and surfaces.

SARS-CoV-2 in environmental perspective: Occurrence, persistence, surveillance, inactivation and challenges

The unprecedented global spread of the severe acute respiratory syndrome (SARS) caused by SARS-CoV-2 is depicting the distressing pandemic consequence on human health, economy as well as ecosystem services. So far novel coronavirus (CoV) outbreaks were associated with SARS-CoV-2 (2019), middle east respiratory syndrome coronavirus (MERS-CoV, 2012), and SARS-CoV-1 (2003) events. CoV relates to the enveloped family of Betacoronavirus (βCoV) with positive-sense single-stranded RNA (+ssRNA). Knowing well the persistence, transmission, and spread of SARS-CoV-2 through proximity, the faecal-oral route is now emerging as a major environmental concern to community transmission. The replication and persistence of CoV in the gastrointestinal (GI) tract and shedding through stools is indicating a potential transmission route to the environment settings. Despite of the evidence, based on fewer reports on SARS-CoV-2 occurrence and persistence in wastewater/sewage/water, the transmission of the infective virus to the community is yet to be established. In this realm, this communication attempted to review the possible influx route of the enteric enveloped viral transmission in the environmental settings with reference to its occurrence, persistence, detection, and inactivation based on the published literature so far. The possibilities of airborne transmission through enteric virus-laden aerosols, environmental factors that may influence the viral transmission, and disinfection methods (conventional and emerging) as well as the inactivation mechanism with reference to the enveloped virus were reviewed. The need for wastewater epidemiology (WBE) studies for surveillance as well as for early warning signal was elaborated. This communication will provide a basis to understand the SARS-CoV-2 as well as other viruses in the context of the environmental engineering perspective to design effective strategies to counter the enteric virus transmission and also serves as a working paper for researchers, policy makers and regulators.

Multifunctional application of PVA-aided Zn-Fe-Mn coupled oxide nanocomposite

Zinc oxide (ZnO) is a fascinating semiconductor material with many applications such as adsorption, photocatalysis, sensor, and antibacterial activities. By using a poly (vinyl alcohol) (PVA) polymer as a capping agent and metal oxides (iron and manganese) as a couple, the porous PVA-aided Zn/Fe/Mn ternary oxide nanocomposite material (PTMO-NCM) was synthesized. The thermal, optical, crystallinity, chemical bonding, porosity, morphological, charge transfer properties of the synthesized materials were confirmed by DTG/DSC, UV-Vis-DRS, XRD, FT-IR, BET, SEM-EDAX/TEM-HRTEM-SAED, and CV/EIS/amperometric analytical techniques, respectively. The PTMO-NCM showed an enhanced surface area and charge transfer capability, compared to ZnO. Using the XRD pattern and TEM image analysis, the crystalline size of the materials was confirmed to be in the nanometer range. The porosity and superior charge transfer capabilities of the PTMO-NCM were confirmed from the BET, HRTEM (IFFT)/SAED, and CV/EIS analysis. The adsorption kinetics (adsorption reaction/adsorption diffusion) and adsorption isotherm test confirmed the presence of a chemisorption type of adsorbate/methylene blue dye-adsorbent/PTMO-NCM interaction. The photocatalytic performance was tested on the Congo red and Acid Orange-8 dyes. The superior ascorbic acid sensing capability of the material was understood from CV and amperometric analysis. The noble antibacterial activities of the material were also confirmed on both gram-negative and gram-positive bacteria.

Polyetheretherketone and Its Composites for Bone Replacement and Regeneration

In this article, recent advances in the development, preparation, biocompatibility and mechanical properties of polyetheretherketone (PEEK) and its composites for hard and soft tissue engineering are reviewed. PEEK has been widely employed for fabricating spinal fusions due to its radiolucency, chemical stability and superior sterilization resistance at high temperatures. PEEK can also be tailored into patient-specific implants for treating orbital and craniofacial defects in combination with additive manufacturing process. However, PEEK is bioinert, lacking osseointegration after implantation. Accordingly, several approaches including surface roughening, thin film coating technology, and addition of bioactive hydroxyapatite (HA) micro-/nanofillers have been adopted to improve osseointegration performance. The elastic modulus of PEEK is 3.7-4.0 GPa, being considerably lower than that of human cortical bone ranging from 7-30 GPa. Thus, PEEK is not stiff enough to sustain applied stress in load-bearing orthopedic implants. Therefore, HA micro-/nanofillers, continuous and discontinuous carbon fibers are incorporated into PEEK for enhancing its stiffness for load-bearing applications. Among these, carbon fibers are more effective than HA micro-/nanofillers in providing additional stiffness and load-bearing capabilities. In particular, the tensile properties of PEEK composite with 30wt% short carbon fibers resemble those of cortical bone. Hydrophobic PEEK shows no degradation behavior, thus hampering its use for making porous bone scaffolds. PEEK can be blended with hydrophilic polymers such as polyglycolic acid and polyvinyl alcohol to produce biodegradable scaffolds for bone tissue engineering applications.

Synthesis, Antimicrobial Activity, and Photocatalytic Performance of Ce Doped SnO2 Nanoparticles

This work represented the synthesis of Ce doped SnO2 nanoparticles by a wet chemical method and was characterized by various characterization techniques. PXRD confirmed the presence of the rutile phase for Ce doped SnO2 nanoparticles. SEM image and elemental mapping showed agglomerated irregular shaped particles and uniform distribution of 5% Ce ions within the SnO2 lattice, respectively. Ce doped SnO2 nanoparticles showed antimicrobial activity against E. coli and prevented the growth of bacteria. The nanoparticles were found photocatalytic active and photocatalytic behavior was elucidated by the degradation of Malachite Green dye under UV light irradiation.

Review on heterogeneous photocatalytic disinfection of waterborne, airborne, and foodborne viruses: Can we win against pathogenic viruses?

Microbial pathogenic contaminations have world widely represented a serious health hazard to humans. Viruses, as a member of microbial contaminants, seriously threaten human health due to their high environmental resistance, having small sizes, and causing an extensive range of diseases. Therefore, selecting an appropriate technology to remove viral contaminants from the air, water, and foods is of prominent significance. Traditional methods for viral disinfection have not proven to be highly practical and effective because they need high energy resources and operational expenses. In recent years, semiconductor-based photocatalysis has attracted more attention in the field of microorganism inactivation due to its outstanding performance and mild reaction conditions. Therefore, this review primarily concentrates on the recent development in viral inactivation/disinfection by heterogeneous photocatalysts. Moreover, the photocatalytic viral inactivation of waterborne, airborne, and foodborne viruses is discussed. Given the appealing merits of heterogeneous photocatalytic disinfection of viruses, there is no doubt that this technology will be an impressively active research field and a source of comfort and confidence to humans in battling against viruses.

Bactericidal Activity of TiO2 Nanotube Thin Films on Si by Photocatalytic Generation of Active Oxygen Species

The photocatalytic bactericidal activity of titanium dioxide (TiO₂) thin films has been extensively studied. In this study, we investigated the bactericidal activities of TiO₂ nanotube (NT) thin films using Escherichia coli and Staphylococcus aureus cells as the model bacteria. Metallic titanium (Ti) thin films were anodized on a silicon (Si) wafer substrate to form TiO₂ NT thin films. To evaluate the bactericidal activity of the TiO₂ NT thin films, bacteria on the TiO₂ NT thin films were irradiated with near-ultraviolet light (UV-A) at a wavelength of 365 nm. The bactericidal activity was estimated by the survival rate derived from the number of live cells, which form colonies on the cell culture medium. We demonstrated that the survival rate of the two types of bacteria investigated in this study was significantly reduced by UV light irradiation and that there was a difference in the temporal change in the survival rate between the two types of bacteria. Furthermore, we investigated the generation of reactive oxygen species (ROSs) by UV light irradiation of TiO₂ NT thin films using electron spin resonance spectroscopy and fluorescence analysis. We found that the main ROS generated on the surface of the TiO₂ NT film was the hydroxyl radical, OH^•. In addition, the generation of ROSs increased with an increase in the UV irradiation time. We proposed a kinetic model that reproduces the dependence of bacterial viability on the UV light irradiation time by considering the temporal change in the amount of ROSs generated by UV light irradiation. A comparison of the calculated and experimental results revealed that the bactericidal effect consisted of the direct photolysis of bacteria and the photocatalysis via the generation of hydroxyl radicals, with the latter exhibiting a stronger bactericidal effect than the former.

A Review on Enhancing the Antibacterial Activity of ZnO: Mechanisms and Microscopic Investigation

Metal oxide nanomaterials are one of the preferences as antibacterial active materials. Due to its distinctive electronic configuration and suitable properties, ZnO is one of the novel antibacterial active materials. Nowadays, researchers are making a serious effort to improve the antibacterial activities of ZnO by forming a composite with the same/different bandgap semiconductor materials and doping of ions. Applying capping agents such as polymers and plant extract that control the morphology and size of the nanomaterials and optimizing different conditions also enhance the antibacterial activity. Forming a nanocomposite and doping reduces the electron/hole recombination, increases the surface area to volume ratio, and also improves the stability towards dissolution and corrosion. The release of antimicrobial ions, electrostatic interaction, reactive oxygen species (ROS) generations are the crucial antibacterial activity mechanism. This review also presents a detailed discussion of the antibacterial activity improvement of ZnO by forming a composite, doping, and optimizing different conditions. The morphological analysis using scanning electron microscopy, field emission-scanning electron microscopy, field-emission transmission electron microscopy, fluorescence microscopy, and confocal microscopy can confirm the antibacterial activity and also supports for developing a satisfactory mechanism. Graphical abstract showing the metal oxides antibacterial mechanism and the fluorescence and scanning electron microscopic images.

Photocatalytic activity and water purification performance of in situ and ex situ synthesized bacterial cellulose-CuO nanohybrids

The aim of this research was synthesizing of bacterial cellulose (BC) nanohybrids by incorporation of CuO-NPs and evaluation of their ability in the removing of microbial, heavy metals, and dyes pollutants from water. CuO-BC nanohybrids were synthesized by two in situ (sonochemical and precipitation) methods and compared with ex situ synthesized nanohybrid. FE-SEM images revealed that the growth of CuO-NPs in the sonochemically synthesized in situ substrate is better. The ex situ nanohybrid had the highest loading capacity (27.17 μg/cm² ) but the migration of CuO-NPs from this substrate was higher than in situ ones. According to antimicrobial tests, 80% and 90% of initial population of E. coli and S. aureus, respectively, were removed after 6 hr contact of substrates with water. The potential of the substrates in the adsorption of lead and arsenic was about 60% after 24 hr. About 75% of methylene blue and methyl orange dyes were adsorbed into substrates after 6 hr. CuO doped substrates had the photocatalytic activity and caused to decrease the oxygen content about 4%-7% during 6 hr. In general, the reusability of ex situ synthesized substrate was lower than in situ nanohybrids. Sonochemically synthesized substrate was suggested as the best nanohybrid for water purification applications in terms of morphological properties and reusability. PRACTITIONER POINTS: CuO-BC nanohybrids were prepared by in-situ and ex-situ methods. Well distribution of NPs and slower release was achieved by in-situ methods. Antimicrobial and photocatalytic activity of ex-situ nanohybrid was higher than in-situ ones. Dyes and heavy metals were removed successfully with nanohybrid substrates. Sonochemical in-situ nanohybrid exhibited the best water purification performance.