Mechanical stretch inhibits adipogenesis and stimulates osteogenesis of adipose stem cells

Exploration of the miR-187-3p/CNR2 pathway in modulating osteoblast differentiation and treating postmenopausal osteoporosis through mechanical stress

This study aimed to explore how mechanical stress affects osteogenic differentiation via the miR-187-3p/CNR2 pathway. To conduct this study, 24 female C57BL/6 mice, aged 8 weeks, were used and divided into four groups. The Sham and OVX groups did not undergo treadmill exercise, while the Sham + EX and OVX + EX groups received a 8-week treadmill exercise. Post-training, bone marrow and fresh femur samples were collected for further analysis. Molecular biology analysis, histomorphology analysis, and micro-CT analysis were conducted on these samples. Moreover, primary osteoblasts were cultured under osteogenic conditions and divided into GM group and CTS group. The cells in the CTS group underwent a sinusoidal stretching regimen for either 3 or 7 days. The expression of early osteoblast markers (Runx2, OPN, and ALP) was measured to assess differentiation. The study findings revealed that mechanical stress has a regulatory impact on osteoblast differentiation. The expression of miR-187-3p was observed to decrease, facilitating osteogenic differentiation, while the expression of CNR2 increased significantly. These observations suggest that mechanical stress, miR-187-3p, and CNR2 play crucial roles in regulating osteogenic differentiation. Both in vivo and in vitro experiments have confirmed that mechanical stress downregulates miR-187-3p and upregulates CNR2, which leads to the restoration of distal femoral bone mass and enhancement of osteoblast differentiation. Therefore, mechanical stress promotes osteoblasts, resulting in improved osteoporosis through the miR-187-3p/CNR2 signaling pathway. These findings have broad prospect and provide molecular biology guidance for the basic research and clinical application of exercise in the prevention and treatment of PMOP.

Mechanobiology of Adipocytes

The growing obesity epidemic necessitates increased research on adipocyte and adipose tissue function and disease mechanisms that progress obesity. Historically, adipocytes were viewed simply as storage for excess energy. However, recent studies have demonstrated that adipocytes play a critical role in whole-body homeostasis, are involved in cell communication, experience forces in vivo, and respond to mechanical stimuli. Changes to the adipocyte mechanical microenvironment can affect function and, in some cases, contribute to disease. The aim of this review is to summarize the current literature on the mechanobiology of adipocytes. We reviewed over 100 papers on how mechanical stress is sensed by the adipocyte, the effects on cell behavior, and the use of cell culture scaffolds, particularly those with tunable stiffness, to study adipocyte behavior, adipose cell and tissue mechanical properties, and computational models. From our review, we conclude that adipocytes are responsive to mechanical stimuli, cell function and adipogenesis can be dictated by the mechanical environment, the measurement of mechanical properties is highly dependent on testing methods, and current modeling practices use many different approaches to recapitulate the complex behavior of adipocytes and adipose tissue. This review is intended to aid future studies by summarizing the current literature on adipocyte mechanobiology.

Engineering 3D-Printed Bioresorbable Scaffold to Improve Non-Vascularized Fat Grafting: A Proof-of-Concept Study

Autologous fat grafting is the gold standard for treatment in patients with soft-tissue defects. However, the technique has a major limitation of unpredictable fat resorption due to insufficient blood supply in the initial phase after transplantation. To overcome this problem, we investigated the capability of a medical-grade poly L-lactide-co-poly ε-caprolactone (PLCL) scaffold to support adipose tissue and vascular regeneration. Deploying FDM 3D-printing, we produced a bioresorbable porous scaffold with interconnected pore networks to facilitate nutrient and oxygen diffusion. The compressive modulus of printed scaffold mimicked the mechanical properties of native adipose tissue. In vitro assays demonstrated that PLCL scaffolds or their degradation products supported differentiation of preadipocytes into viable mature adipocytes under appropriate induction. Interestingly, the chorioallantoic membrane assay revealed vascular invasion inside the porous scaffold, which represented a guiding structure for ingrowing blood vessels. Then, lipoaspirate-seeded scaffolds were transplanted subcutaneously into the dorsal region of immunocompetent rats (n = 16) for 1 or 2 months. The volume of adipose tissue was maintained inside the scaffold over time. Histomorphometric evaluation discovered small- and normal-sized perilipin+ adipocytes (no hypertrophy) classically organized into lobular structures inside the scaffold. Adipose tissue was surrounded by discrete layers of fibrous connective tissue associated with CD68+ macrophage patches around the scaffold filaments. Adipocyte viability, assessed via TUNEL staining, was sustained by the presence of a high number of CD31-positive vessels inside the scaffold, confirming the CAM results. Overall, our study provides proof that 3D-printed PLCL scaffolds can be used to improve fat graft volume preservation and vascularization, paving the way for new therapeutic options for soft-tissue defects.

Long term observation of de novo adipogenesis using novel bioabsorbable implants with larger size in a porcine model

Introduction

The regeneration of adipose tissue in patients after breast cancer surgery would be desirable without the use of growth factors or cells to avoid potential recurrence and metastasis. We reported that prolate spheroidal-shaped poly-L-lactic acid (PLLA) mesh implants of approximately 18-mm polar diameter and 7.5-mm greatest equatorial diameter containing collagen sponge (CS) would be replaced by regenerated adipose tissue after implantation, thereby suggesting an innovative method for breast reconstruction. Our study aimed to evaluate the adipose tissue regeneration ability of implant aggregates in a porcine model.

Methods

We prepared implant aggregates consisting of thirty PLLA mesh implants containing CS packed in a woven poly (glycolic acid) bag. The implant aggregates were inserted under the mammary glands in the porcine abdomen for a year. Single and double groups were classified by inserting either one or two implant aggregates on each side of the abdomen, respectively.

Results

In both groups, the volume of the implant aggregates decreased over time, and the formation of adipose tissue peaked between 6 and 9 months. Histologically, the formation of adipose tissue was confirmed in the area that was in contact with native adipose tissue.

Conclusions

Our implant aggregates could induce the autologous adipose tissue after long term implantation in vivo, without the use of any growth factor or cell treatment, presenting a potential novel method of breast reconstruction.

Reciprocal Effect of Environmental Stimuli to Regulate the Adipogenesis and Osteogenesis Fate Decision in Bone Marrow-Derived Mesenchymal Stem Cells (BM-MSCs)

Mesenchymal stem cells derived from bone marrow (BM-MSCs) can differentiate into adipocytes and osteoblasts. Various external stimuli, including environmental contaminants, heavy metals, dietary, and physical factors, are shown to influence the fate decision of BM-MSCs toward adipogenesis or osteogenesis. The balance of osteogenesis and adipogenesis is critical for the maintenance of bone homeostasis, and the interruption of BM-MSCs lineage commitment is associated with human health issues, such as fracture, osteoporosis, osteopenia, and osteonecrosis. This review focuses on how external stimuli shift the fate of BM-MSCs towards adipogenesis or osteogenesis. Future studies are needed to understand the impact of these external stimuli on bone health and elucidate the underlying mechanisms of BM-MSCs differentiation. This knowledge will inform efforts to prevent bone-related diseases and develop therapeutic approaches to treat bone disorders associated with various pathological conditions.

Interplay between mechanics and signalling in regulating cell fate

Mechanical signalling affects multiple biological processes during development and in adult organisms, including cell fate transitions, cell migration, morphogenesis and immune responses. Here, we review recent insights into the mechanisms and functions of two main routes of mechanical signalling: outside-in mechanical signalling, such as mechanosensing of substrate properties or shear stresses; and mechanical signalling regulated by the physical properties of the cell surface itself. We discuss examples of how these two classes of mechanical signalling regulate stem cell function, as well as developmental processes in vivo. We also discuss how cell surface mechanics affects intracellular signalling and, in turn, how intracellular signalling controls cell surface mechanics, generating feedback into the regulation of mechanosensing. The cooperation between mechanosensing, intracellular signalling and cell surface mechanics has a profound impact on biological processes. We discuss here our understanding of how these three elements interact to regulate stem cell fate and development.

Additive manufactured macroporous chambers facilitate large volume soft tissue regeneration from adipose-derived extracellular matrix

Breast tissue engineering is a promising alternative intervention for breast reconstruction. Due to their low immunogenicity and well-preserved adipogenic microenvironment, decellularized adipose tissue (DAT) can potentially regenerate adipose tissue in vivo. However, the volume of adipose tissue regenerated from DAT can hardly satisfy the demand for breast reconstruction. Tissue engineering chamber (TEC) is an effective technique for generation of large adipose tissue volumes. However, TEC applications necessitate reoperation to remove non-degradable plastic chambers and harvest autologous tissue flaps, which prolongs the operation time and causes potential damage to donor sites. We improved the TEC strategy by combining bioresorbable polycaprolactone (PCL) chambers and decellularized adipose tissues (DAT). A miniaturized porous PCL chamber was fabricated based on scaling differences between human and rabbit chests, and basic fibroblast growth factor (bFGF)-loaded DAT successfully prepared. In rabbit models, a highly vascularized adipose tissue that nearly filled up the PCL chamber (5 mL) was generated de novo from 0.5 mL bFGF-loaded DAT. The newly formed tissue had significantly high expressions of adipogenic genes, compared to the endogenous adipose tissue. The concept described here can be exploited for breast tissue engineering. STATEMENT OF SIGNIFICANCE: Decellularized adipose tissue (DAT), which provides infiltrated cells adipogenic microenvironment, can potentially regenerate adipose tissue in vivo. Nevertheless, the volume of regenerated adipose tissue is insufficient to repair large sized tissue defect. Tissue engineering chamber (TEC) could provide a protective space for in situ regeneration of large volume tissue. Herein, a new strategy by combining biodegradable polycaprolactone chambers and basic fibroblast growth factor-loaded decellularized adipose tissue is proposed. In rabbit model, newly formed adipose tissue regenerated from DAT successfully filled the dome shaped chamber with ten folds higher volume than DAT, which is proportionally similar to women breast. This work highlighted the importance of adipogenic microenvironment and protective space for adipose tissue regeneration.

Preliminary report of de novo adipogenesis using novel bioabsorbable implants and image evaluation using a porcine model

Our bioabsorbable poly-l-lactic acid (PLLA) mesh implants containing collagen sponge are replaced with adipose tissue after implantation, and this is an innovative method for breast reconstruction. In this preliminary study, we investigated the formation of adipose tissue and evaluated the process via multimodal images in a porcine model using an implant aggregate to generate the larger adipose tissue. The implant aggregate consists of PLLA mesh implants containing collagen sponge and a poly-glycolic acid woven bag covering them. We inserted the implant aggregates under the porcine mammary glands. Magnetic resonance imaging (MRI), ultrasonography (USG), and 3-dimensional (3D) surface imaging and histological evaluations were performed to evaluate the formation of adipose tissue over time. The volume of the implant aggregate and the formed adipose tissue inside the implant aggregate could be evaluated over time via MRI. The space within the implant aggregate was not confirmed on USG due to the acoustic shadow of the PLLA threads. The change in volume was not confirmed precisely using 3D surface imaging. Histologically, the newly formed adipose tissue was confirmed on the skin side of the implant aggregate. This implant aggregate has the ability to regenerate adipose tissue, and MRI is an appropriate method for the evaluation of the volume of the implant aggregation and the formation of adipose tissue.

Icariin and Icariside II Reciprocally Stimulate Osteogenesis and Inhibit Adipogenesis of Multipotential Stromal Cells through ERK Signaling

Herba Epimedii is a famous Chinese herbal medicine for treating bone diseases. Icariin and icariside II, the main chemical constituents, have attracted great attention from scientists for their potential as antiosteoporosis agents. Our study aimed to evaluate their effects on the lineage commitment of multipotential stromal cells (MSCs). The osteogenesis and adipogenesis of MSCs were assessed by ALP activity, calcium deposition, and adipocyte formation. The expression profiles and levels of osteogenic and adipogenic specific genes were evaluated by cDNA microarray and quantitative real-time PCR. The involvement of extracellular signal-regulated kinase (ERK) signaling was studied by enzyme-linked immunosorbent assay. Icariin and icariside II significantly increased ALP activity and mineralization during osteogenic differentiation of MSCs. Runx2, Col1, and Bmp2 were upregulated in the presence of icariin and icariside II. Meanwhile, they downregulated Pparg, Adipsin, and Cebpb expression during adipogenic differentiation. cDNA microarray revealed 57 differentially expressed genes during lineage commitment of MSCs. In addition, icariin and icariside II enhanced the phosphorylation of ERK, and the above biological effects were blocked by ERK inhibitor U0126. Icariin and icariside II may drive the final lineage commitment of MSCs towards osteogenesis and inhibit adipogenesis through the ERK signaling pathway. Both of them exert multiple osteoprotective effects and deserve more attention for their medicinal and healthcare prospects.

Lamin A/C-Dependent Translocation of Megakaryoblastic Leukemia-1 and β-Catenin in Cyclic Strain-Induced Osteogenesis

Lamins are intermediate filaments that play a crucial role in sensing mechanical strain in the nucleus of cells. β-catenin and megakaryoblastic leukemia-1 (MKL1) are critical signaling molecules that need to be translocated to the nucleus for their transcription in response to mechanical strain that induces osteogenesis. However, the exact molecular mechanism behind the translocation of these molecules has not been fully investigated. This study used 10% cyclic strain to induce osteogenesis in the murine osteoblast precursor cell line (MC3T3). The translocation of β-catenin and MKL1 was studied by performing knockdown and overexpression of lamin A/C (LMNA). Cyclic strain increased the expression of osteogenic markers such as alkaline phosphatase (ALP), runt-related transcription factor 2 (RUNX2), and enhanced ALP staining after seven days of incubation. Resultantly, MKL1 and β-catenin were translocated in the nucleus from the cytoplasm during the stress-induced osteogenic process. Knockdown of LMNA decreased the accumulation of MKL1 and β-catenin in the nucleus, whereas overexpression of LMNA increased the translocation of these molecules. In conclusion, our study indicates that both MKL1 and β-catenin molecules are dependent on the expression of LMNA during strain-induced osteogenesis.

Identification osteogenic signaling pathways following mechanical stimulation: A systematic review

INTRODUCTION

It has been shown that mechanical forces can induce or promote osteogenic differentiation as well as remodeling of the new created bone tissues. To apply this characteristic in bone tissue engineering, it is important to know which mechanical stimuli through which signaling pathway has a more significant impact on osteogenesis.

METHODS

In this systematic study, an electronic search was conducted using PubMed and Google Scholar databases. This study has been prepared and organized according to the preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines. Included studies were first categorized according to the in vivo and in vitro studies.

RESULTS

Six types of mechanical stresses were used in these articles and the most commonly used mechanical force and cell source were tension and bone marrow-derived mesenchymal stem cells (BMMSCs), respectively. These forces were able to trigger twelve signaling pathways in which Wnt pathway was so prominent.

CONCLUSION

1) Although specific signaling pathways are induced through specific mechanical forces, Wnt signaling pathways are predominantly activated by almost all types of force/stimulation, 2) All signaling pathways regulate expression of RUNX2, which is known as a master regulator of osteogenesis, 3) In Tension force, the mode of force administration, i.e, continuous or non-continuous tension is more important than the percentage of elongation.

A Preclinical Animal Model for the Study of Scaffold-Guided Breast Tissue Engineering

Scaffold-guided breast tissue engineering (SGBTE) has the potential to transform reconstructive breast surgery. Currently, there is a deficiency in clinically relevant animal models suitable for studying novel breast tissue engineering concepts. To date, only a small number of large animal studies have been conducted and characterization of these large animal models is poorly described in the literature. Addressing this gap in the literature, this publication comprehensively describes our original porcine model based on the current published literature and the experience gained from previous animal studies conducted by our research group. In a long-term experiment using our model, we investigated our SGBTE approach by implanting 60 additively manufactured bioresorbable scaffolds under the panniculus carnosus muscle along the flanks of 12 pigs over 12 months. Our model has the flexibility to compare multiple treatment modalities where we successfully investigated scaffolds filled with various treatments of immediate and delayed fat graft and augmentation with platelet rich plasma. No wound complications were observed using our animal model. We were able to grow clinically relevant volumes of soft tissue, which validates our model. Our preclinical large animal model is ideally suited to assess different scaffold or hydrogel-driven soft tissue regeneration strategies. Impact statement The ability to regenerate soft tissue through scaffold-guided tissue engineering concepts can transform breast reconstructive surgery. We describe an original preclinical large animal model to study controlled and reproducible scaffold-guided breast tissue engineering (SGBTE) concepts. This model features the flexibility to investigate multiple treatment conditions per animal, making it an efficient model. We have validated our model with a long-term experiment over 12 months, which exceeds other shorter published studies. Our SGBTE concept provides a more clinically relevant approach in terms of breast reconstruction. Future studies using this model will support the translation of SGBTE into clinical practice.

Mechanical loading and the control of stem cell behavior

OBJECTIVE

Mechanical stimulation regulates many cell responses. The present study describes the effects of different in vitro mechanical stimulation approaches on stem cell behavior.

DESIGN

The narrative review approach was performed. The articles published in English language that addressed the effects of mechanical force on stem cells were searched on Pubmed and Scopus database. The effects of extrinsic mechanical force on stem cell response was reviewed and discussed.

RESULTS

Cells sense mechanical stimuli by the function of mechanoreceptors and further transduce force stimulation into intracellular signaling. Cell responses to mechanical stimuli depend on several factors including type, magnitude, and duration. Further, similar mechanical stimuli exhibit distinct cell responses based on numerous factors including cell type and differentiation stage. Various mechanical applications modulate stemness maintenance and cell differentiation toward specific lineages.

CONCLUSIONS

Mechanical force application modulates stemness maintenance and differentiation. Modification of force regimens could be utilized to precisely control appropriate stem cell behavior toward specific applications.

The Role and Activation Mechanism of TAZ in Hierarchical Microgroove/Nanopore Topography-Mediated Regulation of Stem Cell Differentiation

Purpose

To investigate the role and activation mechanism of TAZ in periodontal ligament stem cells (PDLSCs) perceiving hierarchical microgroove/nanopore topography.

Materials and Methods

Titanium surface with hierarchical microgroove/nanopore topography fabricated by selective laser melting combined with alkali heat treatment (SLM-AHT) was used as experimental group, smooth titanium surface (Ti) and sandblasted, large-grit, acid-etched (SLA) titanium surface were employed as control groups. Alkaline phosphatase (ALP) activity assays, qRT-PCR, Western blotting, and immunofluorescence were carried out to evaluate the effect of SLM-AHT surface on PDLSC differentiation. Moreover, TAZ activation was investigated from the perspective of nuclear localization to transcriptional activity. TAZ knockdown PDLSCs were seeded on three titanium surfaces to detect osteogenesis- and adipogenesis-related gene expression levels. Immunofluorescence and Western blotting were employed to investigate the effect of the SLM-AHT surface on actin cytoskeletal polymerization and MAPK signaling pathway. Cytochalasin D and MAPK signaling pathway inhibitors were used to determine whether actin cytoskeletal polymerization and the MAPK signaling pathway were indispensable for TAZ activation.

Results

Our results showed that SLM-AHT surface had a greater potential to promote PDLSC osteogenic differentiation while inhibiting adipogenic differentiation than the other two groups. The nuclear localization and transcriptional activity of TAZ were strongly enhanced on the SLM-AHT surface. Moreover, after TAZ knockdown, the enhanced osteogenesis and decreased adipogenesis in SLM-AHT group could not be observed. In addition, SLM-AHT surface could promote actin cytoskeletal polymerization and upregulate p-ERK and p-p38 protein levels. After treatment with cytochalasin D and MAPK signaling pathway inhibitors, differences in the TAZ subcellular localization and transcriptional activity were no longer observed among the different titanium surfaces.

Conclusion

Our results demonstrated that actin cytoskeletal polymerization and MAPK signaling pathway activation triggered by SLM-AHT surface were essential for TAZ activation, which played a dominant role in SLM-AHT surface-induced stem cell fate decision.

Multiphysics simulation of a compression-perfusion combined bioreactor to predict the mechanical microenvironment during bone metastatic breast cancer loading experiments

Incurable breast cancer bone metastasis causes widespread bone loss, resulting in fragility, pain, increased fracture risk, and ultimately increased patient mortality. Increased mechanical signals in the skeleton are anabolic and protect against bone loss, and they may also do so during osteolytic bone metastasis. Skeletal mechanical signals include interdependent tissue deformations and interstitial fluid flow, but how metastatic tumor cells respond to each of these individual signals remains underinvestigated, a barrier to translation to the clinic. To delineate their respective roles, we report computed estimates of the internal mechanical field of a bone mimetic scaffold undergoing combinations of high and low compression and perfusion using multiphysics simulations. Simulations were conducted in advance of multimodal loading bioreactor experiments with bone metastatic breast cancer cells to ensure that mechanical stimuli occurring internally were physiological and anabolic. Our results show that mechanical stimuli throughout the scaffold were within the anabolic range of bone cells in all loading configurations, were homogenously distributed throughout, and that combined high magnitude compression and perfusion synergized to produce the largest wall shear stresses within the scaffold. These simulations, when combined with experiments, will shed light on how increased mechanical loading in the skeleton may confer anti-tumorigenic effects during metastasis.

Blood pressure changes PVAT function and transcriptome: use of the mid-thoracic aorta coarcted rat

Perivascular adipose tissue (PVAT) modifies the contractile function of the vessel it surrounds (outside-in signaling). Little work points to the vessel actively affecting its surrounding PVAT. We hypothesized that inside-out arterial signaling to PVAT would be evidenced by the response of PVAT to changes in tangential vascular wall stress. Rats coarcted in the mid-thoracic aorta created PVAT tissues that would exemplify pressure-dependent changes (above vs. below coarctation); a sham rat was used as a control. Radiotelemetry revealed a ∼20 mmHg systolic pressure gradient across the coarctation 4 wk after surgery. Four measures (histochemical, adipocyte progenitor proliferation and differentiation, isometric tone, and bulk mRNA sequencing) were used to compare PVAT above versus below the ligature in sham and coarcted rats. Neither aortic collagen deposition in PVAT nor arterial media/radius ratio above coarctation was increased versus below segments. However, differentiated adipocytes derived from PVAT above the coarctation accumulated substantially less triglycerides versus those below; their relative proliferation rate as adipogenic precursors was not different. Functionally, the ability of PVAT to assist stress relaxation of isolated aorta was reduced in rings above versus below the coarctation. Transcriptomic analyses revealed that the coarctation resulted in more differentially expressed genes (DEGs) between PVAT above versus below when compared with sham samples from the same locations. A majority of DEGs were in PVAT below the coarctation and were enriched in neuronal/synaptic terms. These findings provide initial evidence that signaling from the vascular wall, as stimulated by a pressure change, influences the function and transcriptional profile of its PVAT.NEW & NOTEWORTHY A mid-thoracic aorta coarcted rat was created to generate a stable pressure difference above versus below the coarctation ligature. This study determined that the PVAT around the thoracic aorta exposed to a higher pressure has a significantly reduced ability to assist stress relaxation versus that below the ligature and appears to retain the ability to be anticontractile. At the same time, the PVAT around the thoracic aorta exposed to higher pressure had a reduced adipogenic potential versus that below the ligature. Transcriptomics analyses indicated that PVAT below the coarctation showed the greatest number of DEGs with an increased profile of the synaptic neurotransmitter gene network.

Molecular and Mechanobiological Pathways Related to the Physiopathology of FPLD2

Laminopathies are rare and heterogeneous diseases affecting one to almost all tissues, as in Progeria, and sharing certain features such as metabolic disorders and a predisposition to atherosclerotic cardiovascular diseases. These two features are the main characteristics of the adipose tissue-specific laminopathy called familial partial lipodystrophy type 2 (FPLD2). The only gene that is involved in FPLD2 physiopathology is the LMNA gene, with at least 20 mutations that are considered pathogenic. LMNA encodes the type V intermediate filament lamin A/C, which is incorporated into the lamina meshwork lining the inner membrane of the nuclear envelope. Lamin A/C is involved in the regulation of cellular mechanical properties through the control of nuclear rigidity and deformability, gene modulation and chromatin organization. While recent studies have described new potential signaling pathways dependent on lamin A/C and associated with FPLD2 physiopathology, the whole picture of how the syndrome develops remains unknown. In this review, we summarize the signaling pathways involving lamin A/C that are associated with the progression of FPLD2. We also explore the links between alterations of the cellular mechanical properties and FPLD2 physiopathology. Finally, we introduce potential tools based on the exploration of cellular mechanical properties that could be redirected for FPLD2 diagnosis.

Differential Expression of Bipotent Commitment-Related Genes in Multipotent Mesenchymal Stromal Cells at Different O2 Levels

The transcriptomic profile associated with osteo- and adipogenic differentiation in growth-arrested multipotent mesenchymal stromal cells (MSCs) from human adipose tissue was analyzed in vitro at 20% (standard laboratory) and 5% (tissue-related) O₂ levels. Compared with day 7, at 5% O₂ on day 14 spontaneous upregulation of osteo- (RUNX2, SP7, BGLAP, and SPP1) and adipogenic differentiation (CEBPA, PPARG, and ADIPOQ) genes in MSCs was observed (p < 0.05). Thus, upon expansion under tissue-related O₂, MSCs demonstrated a bipotent transcriptomic profile, which may contribute to the improvement of their hematopoiesis-supportive function.

Recent Advance in Source, Property, Differentiation, and Applications of Infrapatellar Fat Pad Adipose-Derived Stem Cells

Infrapatellar fat pad (IPFP) can be easily obtained during knee surgery, which avoids the damage to patients for obtaining IPFP. Infrapatellar fat pad adipose-derived stem cells (IPFP-ASCs) are also called infrapatellar fat pad mesenchymal stem cells (IPFP-MSCs) because the morphology of IPFP-ASCs is similar to that of bone marrow mesenchymal stem cells (BM-MSCs). IPFP-ASCs are attracting more and more attention due to their characteristics suitable to regenerative medicine such as strong proliferation and differentiation, anti-inflammation, antiaging, secreting cytokines, multipotential capacity, and 3D culture. IPFP-ASCs can repair articular cartilage and relieve the pain caused by osteoarthritis, so most of IPFP-related review articles focus on osteoarthritis. This article reviews the anatomy and function of IPFP, as well as the discovery, amplification, multipotential capacity, and application of IPFP-ASCs in order to explain why IPFP-ASC is a superior stem cell source in regenerative medicine.

Improving the Retention Rate of Fat Grafts in Recipient Areas via Botulinum Toxin A Treatment

BACKGROUND

Improving the retention rate of transplanted fat is, currently, of great concern. Partial immobilization, angiogenesis, and adipose tissue-derived stem cells, all proven to be influenced by botulinum toxin A (BTX-A), are significant in fat graft retention.

OBJECTIVES

The authors sought to determine the impact of BTX-A on fat grafts.

METHODS

Our study included 12 Sprague Dawley rats and each rat's hind limbs were randomly designated as the BTX-A side and control side. We injected 0.2 mL of BTX-A-treated fat into the quadriceps femoris and subcutaneous space of the BTX-A sides. This was also done for the control sides but with untreated fat. We performed electroneuromyography of recipient muscles at 1 week post-operation. The rats were euthanized at 12 weeks post-operation and we observed the fat retention rate, the fat's histologic characteristics, and the density of vessels and mature adipocytes.

RESULTS

The amplitudes of electroneuromyography were smaller for the BTX-A sides than the control sides. For intramuscularly injected fat, the BTX-A sides had better retention rates and histologic characteristics and a higher density of vessels and mature adipocytes than the control sides. For subcutaneously injected fat, the BTX-A sides had better histologic characteristics and a higher density of vessels and mature adipocytes than the control sides, but the retention rates were not significantly different between the 2 sides.

CONCLUSIONS

Injecting BTX-A-treated fat grafts can immobilize the surrounding muscles. BTX-A can improve the density of vessels and mature adipocytes, histologic characteristics of fat grafts, and retention rate of fat grafts transplanted into muscles.

Adenosine Triphosphate Release and P2 Receptor Signaling in Piezo1 Channel-Dependent Mechanoregulation

Organs and tissues and their constituent cells are physiologically submitted to diverse types of mechanical forces or stress, one common sequence of which is release of intracellular ATP into extracellular space. Extracellular ATP is a well-established autocrine or paracrine signaling molecule that regulates multiple cell functions and mediates cell-to-cell communications via activating the purinergic P2 receptors, more specifically, ligand-gated ion channel P2X receptors and some of the G-protein-coupled P2Y receptors. The molecular mechanisms that sense mechanical and transduce forces to trigger ATP release are poorly understood. The Piezo1, a newly identified mechanosensing ion channel, shows widespread expression and confers mechanosensitivity in many different types of cells. In this mini-review, we briefly introduce the Piezo1 channel and discuss the evidence that supports its important role in the mechanoregulation of diverse cell functions and, more specifically, critical engagement of ATP release and subsequent P2 receptor activation in Piezo1 channel-dependent mechanoregulation. Such ATP release-mediated coupling of the Piezo1 channel and P2 receptors may serve a signaling mechanism that is more common than we currently understand in transducing mechanical information to regulation of the attendant cell functions in various organs and tissues.

Three-Dimensionally Printed Breast Reconstruction Devices Facilitate Nanostructure Surface-Guided Healthy Lipogenesis

Significant fat loss is common in silicon implantation with autologous lipofilling, the most popular type of breast surgery. To overcome this, a 3D-printed fat carrier with well-defined 200 μm radial string and spoke structure was developed, followed by an electrospun nanofiber coating on the entire device surface to promote fat adhesion. This device enhanced the mechanical properties comparably to commercial acellular dermal matrix for in vitro adipogenic differentiation of adipose-derived stem cells, implantation compatibility without foreign body responses, and maintenance of healthy lipid droplet structures. These results show the promising potential of this device to facilitate surface-guided lipogenesis in composite breast reconstruction surgery.

Cyclic tensile stress promotes osteogenic differentiation of adipose stem cells via ERK and p38 pathways

The present study aimed to elucidate whether extracellular signal-regulated kinases 1/2 (ERK1/2) and p38 mitogen-activated protein kinases pathways participate in the transduction of mechanical stretch exerted on adipose stem cells (ASCs) into intracellular osteogenic signals, and if so whether both pathways have time-dependent feature. Rat ASCs were cultured in osteogenic medium for 72 h and assigned into three sets, namely ERK1/2 inhibitor treated set, p38 inhibitor treated set, and the control set. After inhibitor treatment, all cells were subjected to cyclic stretch(2000 με, 1 Hz) on a four-point bending mechanical loading device. Protein and mRNA samples were acquired at six time points: 0, 15 min, 30 min, 1 h, 2 h and 6 h. Western blot showed phosphorylation level of ERK1/2 was elevated by cyclic tensile stress at all time points, while p38 at 15 min, 30 min and 1 h, and the elevation can be completely blocked by corresponding inhibitors. The treatment by ERK1/2 inhibitor was shown to antagonize the up-regulation of osteogenic genes bone morphogenetic protein 2 (BMP-2) and runt-related transcription factor 2 (Runx2) by mechanical stretch at 15 min and 6 h, whereas p38 inhibitor took effect at 15 min only. The results suggested both ERK and p38 could be positive mediators of stretch-induced osteogenic differentiation of ASCs, and ERK stimulate the stretch-induced osteogenic differentiation at both early and late stages while p38 responds to mechanical stretch in a more rapid fashion.

Mechanical stretch and chronotherapeutic techniques for progenitor cell transplantation and biomaterials

In the body, mesenchymal progenitor cells are subjected to a substantial amount external force from different mechanical stresses, each potentially influences their behaviour and maintenance differentially. Tensile stress, or compression loading are just two of these forces, and here we examine the role of cyclical or dynamic mechanical loading on progenitor cell proliferation and differentiation, as well as on other cellular processes including cell morphology, apoptosis and matrix mineralisation. Moreover, we also examine how mechanical stretch can be used to optimise and ready biomaterials before their implantation, and examine the role of the circadian rhythm, the body's innate time keeping system, on biomaterial delivery and acceptance. Finally, we also investigate the effect of mechanical stretch on the circadian rhythm of progenitor cells, as research suggests that mechanical stimulation may be sufficient in itself to synchronise the circadian rhythm of human adult progenitor cells alone, and has also been linked to progenitor cell function. If proven correct, this could offer a novel, non-intrusive method by which human adult progenitor cells may be activated or preconditioned, being readied for differentiation, so that they may be more successfully integrated within a host body, thereby improving tissue engineering techniques and the efficacy of cellular therapies.

Improvement in the Retention Rate of Transplanted Fat in Muscle by Denervation

BACKGROUND

Improvement in the retention rate of transplanted fat is currently a topic of interest. The retention of transplanted fat relies heavily on the reestablishment of blood supply and the function of the adipose-derived stem cells (ADSCs), which may both be impeded by mechanical force. However, the effect of mechanical force on the retention of adipose implants remains unclear.

OBJECTIVES

This study aimed to evaluate the effectiveness of immobilization on fat retention rate.

METHODS

Immobilization was carried out by denervation of the hind limb of rats to reduce the mechanical force. Sprague-Dawley (SD) rats were used, and the two hind limbs were assigned at random to the immobilization side and the control side. On average, 0.4 mL of fat was injected into the bilateral muscle and subcutaneous space of the hind limb, and 6 rats were sacrificed at each time point. The outcome measures included the retention rate, the histologic evaluation, and the density of new vessels and proliferative ADSCs.

RESULTS

For the muscle fat, the retention rate improved, and more proliferative ADSCs and new vessels were found in the immobilization group. The histologic evaluation between the two sides was of no statistical significance. For the fat in the subcutaneous space, no statistical difference was observed in all the outcome measures between the two sides.

CONCLUSIONS

Regional immobilization of the recipient site by denervation can improve the retention of the fat graft in muscles owing to improved density of the new vessels and proliferative ADSCs.

The effect of equiaxial stretching on the osteogenic differentiation and mechanical properties of human adipose stem cells

Although mechanical cues are known to affect stem cell fate and mechanobiology, the significance of such stimuli on the osteogenic differentiation of human adipose stem cells (hASCs) remains unclear. In this study, we investigated the effect of long-term mechanical stimulation on the attachment, osteogenic differentiation and mechanical properties of hASCs. Tailor-made, pneumatic cell stretching devices were used to expose hASCs to cyclic equiaxial stretching in osteogenic medium. Cell attachment and focal adhesions were visualised using immunocytochemical vinculin staining on days 3 and 6, and the proliferation and alkaline phosphatase activity, as a sign of early osteogenic differentiation, were analysed on days 0, 6 and 10. Furthermore, the mechanical properties of hASCs, in terms of apparent Young's modulus and normalised contractility, were obtained using a combination of atomic force microscopy based indentation and computational approaches. Our results indicated that cyclic equiaxial stretching delayed proliferation and promoted osteogenic differentiation of hASCs. Stretching also reduced cell size and intensified focal adhesions and actin cytoskeleton. Moreover, cell stiffening was observed during osteogenic differentiation and especially under mechanical stimulation. These results suggest that cyclic equiaxial stretching modifies cell morphology, focal adhesion formation and mechanical properties of hASCs. This could be exploited to enhance osteogenic differentiation.

Inhibition of PDGFR signaling prevents muscular fatty infiltration after rotator cuff tear in mice

Fatty infiltration in muscle is often observed in patients with sizable rotator cuff tear (RCT) and is thought to be an irreversible event that significantly compromises muscle plasticity and contraction strength. These changes in the mechanical properties of the affected muscle render surgical repair of RCT highly formidable. Therefore, it is important to learn more about the pathology of fatty infiltration to prevent this undesired condition. In the present study, we aimed to generate a mouse model that can reliably recapitulate some of the important characteristics of muscular fatty infiltration after RCT in humans. We found that fatty infiltration can be efficiently induced by a combination of the following procedures: denervation of the suprascapular nerve, transection of the rotator cuff tendon, and resection of the humeral head. Using this model, we found that platelet-derived growth factor receptor-α (PDGFRα)-positive mesenchymal stem cells are induced after this intervention and that inhibition of PDGFR signaling by imatinib treatment can significantly suppress fatty infiltration. Taken together, the present study presents a reliable fatty infiltration mouse model and suggests a key role for PDGFRα-positive mesenchymal stem cells in the process of fatty infiltration after RCT in humans.

Low-intensity pulsed ultrasound upregulates pro-myelination indicators of Schwann cells enhanced by co-culture with adipose-derived stem cells

OBJECTIVES

Peripheral nerve injuries are a common occurrence, resulting in considerable patient suffering; it also represents a major economic burden on society. To improve treatment options following peripheral nerve injuries, scientists aim to find a way to promote Schwann cell (SC) myelination to help nerves to carry out their functions effectively. In this study, we investigated myelination ability of SCs, regulated by co-culture with adipose-derived stem cells (ASCs) or low-intensity pulsed ultrasound (LIPUS), and synergistic effects of combined treatments.

MATERIALS AND METHODS

Schwann cells were co-cultured with or without ASCs, and either left untreated or treated with LIPUS for 10 min/d for 1, 4 or 7 days. Effects of LIPUS and ASC co-culture on pro-myelination indicators of SCs were analysed by real-time PCR (RT-PCR), Western blotting and immunofluorescence staining (IF).

RESULTS

Our results indicate that ASC-SC co-culture and LIPUS, together or individually, promoted mRNA levels of epidermal growth factor receptor 3 (EGFR3/ErbB3), neuregulin1 (NRG1), early growth response protein 2 (Egr2/Krox20) and myelin basic protein (MBP), with corresponding increases in protein levels of ErbB3, NRG1 and Krox20. Interestingly, combination of ASC-SC co-culture and LIPUS displayed the most remarkable effects.

CONCLUSION

We demonstrated that ASCs upregulated pro-myelination indicators of SCs by indirect contact (through co-culture) and that effects could be potentiated by LIPUS. We conclude that LIPUS, as a mechanical stress, may have potential in nerve regeneration with potential clinical relevance.

Transformation of Breast Reconstruction via Additive Biomanufacturing

Adipose tissue engineering offers a promising alternative to current breast reconstruction options. However, the conventional approach of using a scaffold in combination with adipose-derived precursor cells poses several problems in terms of scalability and hence clinical feasibility. Following the body-as-a-bioreactor approach, this study proposes a unique concept of delayed fat injection into an additive biomanufactured and custom-made scaffold. Three study groups were evaluated: Empty scaffold, Scaffold containing 4 cm³ lipoaspirate and Empty scaffold +2-week prevascularisation period. In group 3, of prevascularisation, 4 cm³ of lipoaspirate was injected into scaffolds after 2 weeks. Using a well-characterised additive biomanufacturing technology platform, patient-specific scaffolds made of medical-grade-polycaprolactone were designed and fabricated. Scaffolds were implanted in subglandular pockets in immunocompetent minipigs (n = 4) for 24-weeks. Angiogenesis and adipose tissue regeneration were observed in all constructs. Histological evaluation showed that the prevascularisation + lipoaspirate group had the highest relative area of adipose tissue (47.32% ± 4.12) which was significantly higher than both lipoaspirate-only (39.67% ± 2.04) and empty control group (8.31% ± 8.94) and similar to native breast tissue (44.97% ± 14.12). This large preclinical animal study provides proof-of-principle that the clinically applicable prevascularisation and delayed fat-injection techniques can be used for regeneration of large volumes of adipose tissue.

Mechanoresponsive musculoskeletal tissue differentiation of adipose-derived stem cells

Musculoskeletal tissues are constantly under mechanical strains within their microenvironment. Yet, little is understood about the effect of in vivo mechanical milieu strains on cell development and function. Thus, this review article outlines the in vivo mechanical environment of bone, muscle, cartilage, tendon, and ligaments, and tabulates the mechanical strain and stress in these tissues during physiological condition, vigorous, and moderate activities. This review article further discusses the principles of mechanical loading platforms to create physiologically relevant mechanical milieu in vitro for musculoskeletal tissue regeneration. A special emphasis is placed on adipose-derived stem cells (ADSCs) as an emerging valuable tool for regenerative musculoskeletal tissue engineering, as they are easily isolated, expanded, and able to differentiate into any musculoskeletal tissue. Finally, it highlights the current state-of-the art in ADSCs-guided musculoskeletal tissue regeneration under mechanical loading.

The increasingly complex regulation of adipocyte differentiation

Adipose (AD) tissue development and function relies on the ability of adipocytes to proliferate and differentiate into lipid-containing cells that also have endocrine function. Research suggests that certain conditions can induce AD tissue stem cells to differentiate into various cell types and that the microenvironment of the cell, including the extracellular matrix (ECM), is essential in maintaining cell and tissue function. This review provides an overview of factors involved in the proliferation and differentiation of adipocytes. A brief review of the numerous factors that influence PPARγ, the transcription factor thought to be the master regulator of adipocyte differentiation, provides context of established pathways that regulate adipogenesis. Thought provoking findings from research with hypoxia that is supported by earlier research that vascular development is related to adipogenesis are reviewed. Finally, our understanding of the critical role of the ECM and environment in adipogenesis is discussed and compared with studies that suggest that adipocytes may dedifferentiate and can convert into other cell types.

Surface Chemical Gradient Affects the Differentiation of Human Adipose-Derived Stem Cells via ERK1/2 Signaling Pathway

To understand the role of surface chemistry on cell behavior and the associated molecular mechanisms, we developed and utilized a surface chemical gradient of amine functional groups by carefully adjusting the gas composition of 1,7-octadiene (OD) and allylamine (AA) of the plasma phase above a moving substrate. The chemical gradient surface used in the present work shows an increasing N/C ratio and wettability from the OD side toward the AA side with no change in surface topography. Under standard culture conditions (with serum), human adipose-derived stem cells (hASCs) adhesion and spreading area increased toward the AA side of the gradient. However, there were no differences in cell behavior in the absence of serum. These results, supported by the trends in proteins adsorption on the gradient surface, demonstrated that surface chemistry affects the response of hASCs through cell-adhesive serum proteins, rather than interacting directly with the cells. The expression of p-ERK and the osteogenic differentiation increased toward the AA side of the gradient, while adipogenic differentiation decreased in the same direction; however, when the activation of ERK1/2 was blocked by PD98059, the levels of osteogenic or adipogenic differentiation on different regions of the chemical gradient were the same. This indicates that ERK1/2 may be an important downstream signaling pathway of surface chemistry directed stem cell fate.

Polymodal Transient Receptor Potential Vanilloid (TRPV) Ion Channels in Chondrogenic Cells

Mature and developing chondrocytes exist in a microenvironment where mechanical load, changes of temperature, osmolarity and acidic pH may influence cellular metabolism. Polymodal Transient Receptor Potential Vanilloid (TRPV) receptors are environmental sensors mediating responses through activation of linked intracellular signalling pathways. In chondrogenic high density cultures established from limb buds of chicken and mouse embryos, we identified TRPV1, TRPV2, TRPV3, TRPV4 and TRPV6 mRNA expression with RT-PCR. In both cultures, a switch in the expression pattern of TRPVs was observed during cartilage formation. The inhibition of TRPVs with the non-selective calcium channel blocker ruthenium red diminished chondrogenesis and caused significant inhibition of proliferation. Incubating cell cultures at 41 °C elevated the expression of TRPV1, and increased cartilage matrix production. When chondrogenic cells were exposed to mechanical load at the time of their differentiation into matrix producing chondrocytes, we detected increased mRNA levels of TRPV3. Our results demonstrate that developing chondrocytes express a full palette of TRPV channels and the switch in the expression pattern suggests differentiation stage-dependent roles of TRPVs during cartilage formation. As TRPV1 and TRPV3 expression was altered by thermal and mechanical stimuli, respectively, these are candidate channels that contribute to the transduction of environmental stimuli in chondrogenic cells.

Cyclic mechanical stress modulates neurotrophic and myelinating gene expression of Schwann cells

OBJECTIVES

This study aimed to investigate the response of Schwann cells to cyclic compressive and tensile stresses of different durations of stimulation.

MATERIALS AND METHODS

RSC96 cells were subjected to cyclic tensile stress or compressive stress; for either, cells in five groups were treated for 0, 1, 2, 24 and 48 h respectively. Enzyme-linked immunosorbent assay was conducted to detect secretion of nerve growth factor (NGF), brain-derived neurotrophic factor (BDNF), neurotrophin-3 and neurotrophin-4 in the culture medium. Real-time PCR was conducted to quantify mRNA expression of neurotrophins including NGF, BDNF, neurotrophin-3 and neurotrophin-4, and myelin-related genes including Sox10, Krox20, neuregulin 1, NCAM, N-cadherin, P0, MAG and MBP. Immunofluorescent staining was performed to visualize Krox20 and F-actin in the tensile groups.

RESULTS

Within 24 h, cells treated with cyclic tensile stress expressed and secreted significantly more BDNF, while cyclic compression down-regulated BDNF expression. Cells treated with both tensile and compressive stress down-regulated expression of NRG1, NCAM, Krox20 and Sox10 at all time points. Expression of N-cadherin was not affected by either stretch or compression. F-actin was down-regulated by tensile stress.

CONCLUSIONS

Both tensile and compressive loading down-regulated expression of several important myelin-related Schwann cells genes and thus facilitated demyelination. Tensile stress meanwhile promoted secretion of BDNF by Schwann cells within 24 h, which may contribute to maintenance and repair of damaged axons. These effects of mechanical stress might have been mediated by the actin cytoskeleton.

Comparison of Effects of Mechanical Stretching on Osteogenic Potential of ASCs and BMSCs

Mechanical forces play critical roles in the development and remodeling processes of bone. As an alternative cell source for bone engineering, adipose-derived stem cells (ASCs) should be fully investigated for their responses to mechanical stress. Similarly, the osteogenic potential, stimulated by mechanical stress, should be compared with bone marrow stromal cells (BMSCs), which have been clinically used for bone tissue engineering. In this study, ASCs and BMSCs were osteogenic-induced for 48 hours, and then subjected to uniaxial mechanical stretching for 2 or 6 hours. Cell orientation, osteogenic regulatory genes, osteogenic genes and ALP activities were measured and compared between ASCs and BMSCs. ASCs could align in a perpendicular way to the direction of stretching stress, while BMSCs did not present a specific alignment. Both 2 and 6 hours mechanical stretching could enhance the mRNA expression of Osx and Runx2 in BMSCs and ASCs, while OCN mRNA only increased in ASCs after 6 hours mechanical loading. Mechanical stretching enhanced the BMP-2 mRNA expression in ASCs, while only after 6 hours of mechanical loading significantly increased the BMP-2 gene expression in BMSCs. Significant differences only exist between ASCs and BMSCs loaded at 2 hours of mechanical stretching. It is concluded that ASCs are more rapid responders to mechanical stress, and have greater potential than BMSCs in osteogenesis when stimulated by mechanical stretching, indicating their usefulness for bone study in a rat model.

Enhancement of tenogenic differentiation of human adipose stem cells by tendon-derived extracellular matrix

Mesenchymal stem cells (MSCs) have gained increasing research interest for their potential in improving healing and regeneration of injured tendon tissues. Developing functional three-dimensional (3D) scaffolds to promote MSC proliferation and differentiation is a critical requirement in tendon tissue engineering. Tendon extracellular matrix has been shown to maintain the tenogenic potential of tendon stem cells and stimulate tenogenesis of human adipose stem cells (hASCs) in 2D culture. This study aims at characterizing the biological composition of urea-extracted fraction of tendon ECM (tECM) and its tenogenic effect on hASCs cultured in a 3D collagen scaffold under uniaxial tension. The tECM obtained was cell-free and rich in ECM proteins. hASCs seeded in tECM-supplemented scaffold exhibited significantly increased proliferation and tenogenic differentiation. The presence of tECM also greatly suppressed the osteogenic differentiation of hASCs triggered by uniaxial tension. In addition, tECM-supplemented constructs displayed enhanced mechanical strength, accompanied by reduced expression and activity of MMPs in the seeded hASCs, indicating a regulatory activity of tECM in cell-mediated scaffold remodeling. These findings support the utility of tECM in creating bio-functional scaffolds for tendon tissue engineering.

Mechanical compressive force inhibits adipogenesis of adipose stem cells

OBJECTIVE

The aim of this study was to investigate effects of mechanical compressive force on differentiation of adipose-derived stem cells (ASCs) in vitro.

MATERIALS AND METHODS

Mice ASCs were treated with compressive force (2000 με, 1 Hz) for 2 or 6 h after adipogenic induction for 3 days, then oil red O staining was used to examine oil droplet-filled cells. Adipogenic genes, PPAR-γ1 and APN, were examined by real-time PCR and immunofluorescence (IF) staining was performed to test expression of de-PPAR-γ and ph-PPAR-γ at the protein level.

RESULTS

Our data showed that mechanical compressive force reduced numbers of oil droplet-filled cells, and down-regulated mRNA levels of both PPAR-γ1 and APN and protein level of PPAR-γ, in ASCs.

CONCLUSIONS

In culture medium containing adipogenic stimuli, mechanical compressive force inhibited adipogenesis of ASCs.

Osteogenic differentiation of adipose-derived stem cells prompted by low-intensity pulsed ultrasound

OBJECTIVES

Based on in vivo studies, low-intensity pulsed ultrasound (LIPUS) stimulation has been widely used in the clinic for advancing bone growth during healing of non-union alignment, fractures and other osseous defects. In this study, we have investigated osteogenic differentiation of adipose stem cells (ASCs) regulated by LIPUS, and also in a preliminarily manner, we have discussed diverse effects of different duty ratio parameters.

MATERIALS AND METHODS

Mouse adipose stem cells were isolated and osteogenically induced. Then they were treated with LIPUS for 10 min/day for 3 days, 5 days and 7 days, respectively. Finally, effects of LIPUS on osteogenic differentiation of the ASCs were analysed by real-time PCR, western blotting and immunofluorescence.

RESULTS

Our data indicated that LIPUS promoted mRNA levels of runt-related transcription factor 2, osteopontin and osterix in the presence of osteo-induction medium; moreover, protein levels of runt-related transcription factor 2 and osteopontin were upregulated.

CONCLUSIONS

We successfully demonstrated that LIPUS enhanced osteogenesis of ASCs, specially at the duty ratio of 20%.

Osteogenesis of Adipose-Derived Stem Cells

Current treatment options for skeletal repair, including immobilization, rigid fixation, alloplastic materials and bone grafts, have significant limitations. Bone tissue engineering offers a promising method for the repair of bone deficieny caused by fractures, bone loss and tumors. The use of adipose derived stem cells (ASCs) has received attention because of the self-renewal ability, high proliferative capacity and potential of osteogenic differentiation in vitro and in vivo studies of bone regeneration. Although cell therapies using ASCs are widely promising in various clinical fields, no large human clinical trials exist for bone tissue engineering. The aim of this review is to introduce how they are harvested, examine the characterization of ASCs, to review the mechanisms of osteogenic differentiation, to analyze the effect of mechanical and chemical stimuli on ASC osteodifferentiation, to summarize the current knowledge about usage of ASC in vivo studies and clinical trials, and finally to conclude with a general summary of the field and comments on its future direction.

Mechanical input restrains PPARγ2 expression and action to preserve mesenchymal stem cell multipotentiality

Exercise-generated signals are pro-osteogenic and anti-adipogenic within the marrow. In vitro studies indicate that mechanical signals directly block adipogenic differentiation through activation of β-catenin and by limiting PPARγ2 expression. Whether mechanically generated β-catenin can inhibit adipogenesis during PPARγ transactivation is unknown. We evaluated the ability of mechanical signals to limit adipogenesis in marrow derived mesenchymal stem cells (mdMSC) distal to activation of PPARγ. First, we established that mdMSC attained an adipogenic phenotype within 2-4 days in the presence of rosiglitazone (1-25 μM) and that β-catenin activation via GSK3β inhibition interfered with this process. Similarly, mechanical strain (3600 cycles, 2% strain daily) inhibited adipogenesis at 3 days, preventing rosiglitazone-induced PPARγ upregulation as well as aP2 and adiponectin protein expression. To assess whether a reduction in PPARγ expression was necessary for anti-adipogenic action, PPARγ2 was overexpressed: both mechanical strain and GSK3β inhibition prevented expression of aP2 and adiponectin proteins despite abundant PPARγ2 and its ligand. To understand the fate of single cells experiencing mechanical strain we generated mdMSC from aP2-GFP reporter expressing mice. Rosiglitazone treatment for 3 days induced GFP expression in more than 80% of cells. Sorting by GFP expression revealed that the highest 20% of aP2-GFP expressing cells was responsible for the majority of adipogenic protein expression. This highly expressing GFP fraction had a reduced ability to respond to an osteogenic stimulus: BMP-2 treatment increased osterix by 12-fold in contrast to the 42-fold increase in osterix expression that resulted from BMP-2 treatment of the bottom 75% of GFP expressing cells. This suggested that highly expressing aP2-GFP cells represented more terminally differentiated adipocytes, with reduced multipotentiality. Application of mechanical strain to aP2-GFP mdMSC treated with rosiglitazone caused a two-fold decrease in the size of the upper cell fraction, suggesting that mechanical strain preserved MSC in a multipotent state. Our data show that mechanical strain restricts adipogenesis both by limiting PPARγ2 expression and by preventing PPARγ action, protecting the potential of MSC to enter other lineages.

Subclinical Indication of Linkage Between Markers of Skeletal and Cardiovascular Properties

Little is known about early coincidental changes in bone and vascular properties, particularly in the context of skeletal anabolism (puberty) versus relative equilibrium (young adulthood). We aimed to determine if subclinical markers of vascular function were associated with bone mineral content (BMC) and to evaluate the contribution of systemic factors in healthy females ages 14-42 years. Endothelial function was assessed by flow mediated dilatation (FMD), arterial stiffness by pulse wave velocity (PWV) and augmentation index (AIx), blood pressure (BP) by sphygmomanometer, BMC by DXA, and systemic factors by fasting blood draw. General linear models controlled for age, race and height indicated a positive association between systolic BP (SBP) and BMC independent of systemic factors. When stratified by age using 19 years as a cut-point, there was an inverse relationship between AIx75 in adolescents with insulin (P<0.10) or inflammatory markers (P<0.10) in statistical models. Conversely, there was a positive relationship between BMC and both PWV and AIx75 in young adults (P<0.05). The link between bone and the vasculature may be life stage-dependent. In the context of a less dynamic microenvironment in young adult females, metabolic factors appear to moderate less of an effect of hemodynamic properties on the skeleton relative to adolescents.