Development and characterization of a simple perfused oral microcosm

Use of natural peptide TP4 as a food preservative prevents contamination by fungal pathogens

Molecules of natural origin often possess useful biological activities. For instance, the natural peptide Tilapia Piscidin 4 (TP4) exhibits potent antimicrobial activity against a broad spectrum of pathogens. In this study, we explored the potential application of TP4 as a food preservative, asking whether it can prevent spoilage due to microbial contamination. A preliminary in silico analysis indicated that TP4 should interact strongly with fungal cell membrane components. Hence, we tested the activity of TP4 toward Candida albicans within fruit juice and found that the addition of TP4 could abolish fungal growth. We further determined that the peptide acts via a membranolytic mechanism and displays concentration-dependent killing efficiency. In addition, we showed that TP4 inhibited growth of Rhizopus oryzae in whole fruit (tomato) samples. Based on these findings, we conclude that TP4 should be further evaluated as a potentially safe and green solution to prevent food spoilage.

Arginine and sodium fluoride affect the microbial composition and reduce biofilm metabolism and enamel mineral loss in an oral microcosm model

OBJECTIVE

To assess the effects of arginine, with or without sodium fluoride (NaF; 1,450 ppm), on saliva-derived microcosm biofilms and enamel demineralization.

METHODS

Saliva-derived biofilms were grown on bovine enamel blocks in 0.2 % sucrose-containing modified McBain medium, according to six experimental groups: control (McBain 0.2 %); 2.5 % arginine; 8 % arginine; NaF; 2.5 % arginine with NaF; and 8 % arginine with NaF. After 5 days of growth, biofilm viability was assessed by colony-forming units counting, laser scanning confocal microscopy was used to determine biofilm vitality and extracellular polysaccharide (EPS) production, while biofilm metabolism was evaluated using the resazurin assay and lactic acid quantification. Demineralization was evaluated by measuring pH in the culture medium and calcium release. Data were analyzed by Kruskal-Wallis' and Dunn's tests (p < 0.05).

RESULTS

8 % arginine with NaF showed the strongest reduction in total streptococci and total microorganism counts, with no significant difference compared to arginine without NaF. Neither 2.5 % arginine alone nor NaF alone significantly reduced microbial counts compared to the control, although in combination, a reduction in all microbial groups was observed. Similar trends were found for biofilm vitality and EPS, and calcium released to the growth medium.

CONCLUSIONS

8 % Arginine, with or without NaF, exhibited the strongest antimicrobial activity and reduced enamel calcium loss. Also, NaF enhanced the effects of 2.5 % arginine, yielding similar results to 8 % arginine for most parameters analyzed.

CLINICAL SIGNIFICANCE

The results provided further evidence on how arginine, with or without NaF, affects oral microcosm biofilms and enamel mineral loss.

Investigating the association between nitrate dosing and nitrite generation by the human oral microbiota in continuous culture

The generation of nitrite by the oral microbiota is believed to contribute to healthy cardiovascular function, with oral nitrate reduction to nitrite associated with systemic blood pressure regulation. There is the potential to manipulate the composition or activities of the oral microbiota to a higher nitrate-reducing state through nitrate supplementation. The current study examined microbial community composition and enzymatic responses to nitrate supplementation in sessile oral microbiota grown in continuous culture. Nitrate reductase (NaR) activity and nitrite concentrations were not significantly different to tongue-derived inocula in model biofilms. These were generally dominated by Streptococcus spp., initially, and a single nitrate supplementation resulted in the increased relative abundance of the nitrate-reducing genera Veillonella, Neisseria, and Proteus spp. Nitrite concentrations increased concomitantly and continued to increase throughout oral microbiota development. Continuous nitrate supplementation, over a 7-day period, was similarly associated with an elevated abundance of nitrate-reducing taxa and increased nitrite concentration in the perfusate. In experiments in which the models were established in continuous low or high nitrate environments, there was an initial elevation in nitrate reductase, and nitrite concentrations reached a relatively constant concentration over time similar to the acute nitrate challenge with a similar expansion of Veillonella and Neisseria. In summary, we have investigated nitrate metabolism in continuous culture oral biofilms, showing that nitrate addition increases nitrate reductase activity and nitrite concentrations in oral microbiota with the expansion of putatively NaR-producing taxa.IMPORTANCEClinical evidence suggests that blood pressure regulation can be promoted by nitrite generated through the reduction of supplemental dietary nitrate by the oral microbiota. We have utilized oral microbiota models to investigate the mechanisms responsible, demonstrating that nitrate addition increases nitrate reductase activity and nitrite concentrations in oral microbiota with the expansion of nitrate-reducing taxa.

The effect of sex steroid hormones on the ecology of in vitro oral biofilms

Sex steroid hormones (SSH) such as oestrogen, progesterone and testosterone are cholesterol derived molecules that regulate various physiological processes. They are present in both blood and saliva, where they come in contact with oral tissues and oral microorganisms. Several studies have confirmed the effect of these hormones on different periodontal-disease-associated bacteria, using single-species models. Bacteria can metabolize SSH, use them as alternative for vitamin K and also use them to induce the expression of virulence factors. However, it is still unclear what the effects of SSH are on the oral microbiome. In this study, we investigated the effects of four SSH on commensal in vitro oral biofilms. Saliva-derived oral biofilms were grown in Mc Bain medium without serum or menadione using the Amsterdam Active-Attachment model. After initial attachment in absence of SSH, the biofilms were grown in medium containing either oestradiol, oestriol, progesterone or testosterone at a 100-fold physiological concentration. Menadione or ethanol were included as positive control and negative control, respectively. After 12 days with daily medium refreshments, biofilm formation, biofilm red fluorescence and microbial composition were determined. The supernatants were tested for proteolytic activity using the Fluorescence Resonance Energy Transfer Analysis (FRET). No significant differences were found in biofilm formation, red fluorescence or microbial composition in any of the tested groups. Samples grown in presence of progesterone and oestradiol showed proteolytic activity comparable to biofilms supplemented with menadione. In contrast, testosterone and oestriol showed a decreased proteolytic activity compared to biofilms grown in presence of menadione. None of the tested SSH had large effects on the ecology of in vitro oral biofilms, therefore a direct translation of our results into in vivo effects is not possible. Future experiments should include other host factors such as oral tissues, immune cells and combinations of SSH as present in saliva, in order to have a more accurate picture of the phenomena taking place in both males and females.

In-vitro polymicrobial oral biofilm model represents clinical microbial profile and disease progression during implant-related infections

AIM

Clinically relevant in-vitro biofilm models are essential and valuable tools for mechanistically dissecting the etiopathogenesis of infectious diseases and test new antimicrobial therapies. Thus, the aim of this study was to develop and test a clinically relevant in-vitro oral polymicrobial biofilm model that mimics implant-related infections in terms of microbial profile.

METHODS AND RESULTS

For this purpose, 24-well plate system was used to model oral biofilms, using three different microbial inoculums to grow in-vitro biofilms: (1) human saliva from periodontally healthy patients; (2) saliva as in inoculum 1 + Porphyromonas gingivalis strain; and (3) supra and subgingival biofilm collected from peri-implant sites of patients diagnosed with peri-implantitis. Biofilms were grown to represent the dynamic transition from an aerobic to anaerobic community profile. Subsequently, biofilms were collected after each phase and evaluated for microbiological composition, microbial counts, biofilm biomass, structure, and susceptibility to chlorhexidine (CHX). Results showed higher live cell count (P < .05) for biofilms developed from patients' biofilm inoculum, but biomass volume, dry weight, and microbiological composition were similar among groups (P > .05). Interestingly, according to the checkerboard DNA-DNA hybridization results, the biofilm developed from stimulated human saliva exhibited a microbial composition more similar to the clinical subgingival biofilm of patients with peri-implantitis, with proportions of the main pathogens closer to those found in the disease. In addition, biofilm developed using saliva as inoculum was shown to be susceptible to CHX with significant reduction in bacteria compared with biofilms without exposure to CHX (P < .05).

CONCLUSION

The findings suggested that the in-vitro polymicrobial biofilm developed from human saliva as inoculum is a suitable model and clinically relevant tool for mimicking the microbial composition of implant-related infections.

Dual nanocarrier of chlorhexidine and fluconazole: Physicochemical characterization and effects on microcosm biofilms and oral keratinocytes

OBJECTIVES

This study assembled and characterized a dual nanocarrier of chlorhexidine (CHX) and fluconazole (FLZ), and evaluated its antibiofilm and cytotoxic effects.

METHODS

CHX and FLZ were added to iron oxide nanoparticles (IONPs) previously coated by chitosan (CS) and characterized by physical-chemical analyses. Biofilms from human saliva supplemented with Candida species were grown (72 h) on glass discs and treated (24 h) with IONPs-CS carrying CHX (at 39, 78, or 156 µg/mL) and FLZ (at 156, 312, or 624 µg/mL) in three growing associations. IONPs and CS alone, and 156 µg/mL CHX + 624 µg/mL FLZ (CHX156-FLZ624) were tested as controls. Next, microbiological analyses were performed. The viability of human oral keratinocytes (NOKsi lineage) was also determined (MTT reduction assay). Data were submitted to ANOVA or Kruskal-Wallis, followed by Fisher's LSD or Tukey's tests (α=0.05).

RESULTS

Nanocarriers with spherical-like shape and diameter around 6 nm were assembled, without compromising the crystalline property and stability of IONPs. Nanocarrier at the highest concentrations was the most effective in reducing colony-forming units of Streptococcus mutans, Lactobacillus spp., Candida albicans, and Candida glabrata. The other carriers and CHX156-FLZ624 showed similar antibiofilm effects, and significantly reduced lactic acid production (p<0.001). Also, a dose-dependent cytotoxic effect against oral keratinocytes was observed for the dual nanocarrier. IONPs-CS-CHX-FLZ and CHX-FLZ significantly reduced keratinocyte viability at CHX and FLZ concentrations ≥7.8 and 31.25 µg/mL, respectively (p<0.05).

CONCLUSION

The nanotherapy developed outperformed the effect of the combination CHX-FLZ on microcosm biofilms, without increasing the cytotoxic effect of the antimicrobials administered.

CLINICAL SIGNIFICANCE

The dual nanocarrier is a promising topically-applied therapy for the management of oral candidiasis considering that its higher antibiofilm effects allow the use of lower concentrations of antimicrobials than those found in commercial products.

Immediate and Sustained Root Caries Prevention of Fluoride Varnish Combined with Toothpastes

The aim of this study was to determine the immediate and sustained effect of a fluoride varnish and its combinations with toothpastes in preventing root caries development using a salivary microcosm in vitro model. Human root dentin specimens (n = 150) were randomly divided into 5 experimental protocols (n = 30): (1) Fluoride Varnish (V); (2) V followed by Paste One (V + PO); (3) V followed by Paste Plus (V + PP); (4) V followed by PO and PP (V + PO + PP); and (5) No treatment (control). One varnish layer was applied on the specimens (except for the control group) and kept for 18 h. Then, the varnish was removed and toothpaste treatments were initiated according to experimental groups. For the short-term incubation model (n = 15), the specimens were also immediately subjected to 7-day cariogenic challenge. For that, human saliva was used as bacterial inoculum and McBain artificial saliva containing 2% sucrose as growth medium. The other half of the specimens (n = 15) were used to study the varnish's sustained effect by long-term incubation (8 weeks) before cariogenic challenge. The protocols' anti-caries properties were evaluated by dentin porosity (rhodamine intensity; RI) and mineral density, while their anti-biofilm effects were evaluated using biofilm's biomass and viability assays. For short- and long-term incubation models, all experimental regimens resulted in statistically significant decreases (p < 0.05) in the RI (up to 180 μm and 120 μm, respectively) as well as higher mineral density compared to No treatment (p < 0.001). V + PO + PP and/or V + PO resulted in statistically lower RI compared to V for some depths (p < 0.05) in both models. There were changes in RI and mineral density within groups over time. All experimental treatments exhibited anti-biofilm effects. All prevention protocols exhibited immediate and sustained anti-caries effect against root caries development. The combination of a fluoride varnish with PO resulted in superior additional anti-caries effects.

Effects of Bio-Aging on Mechanical Properties and Microbial Behavior of Different Resin Composites

Under challenging oral environments, the overall performance of resin composites is affected by bio-aging. This study investigated the effects of saliva biofilm-induced bio-aging on the mechanical properties and microbial behavior of composites with different filler types. Microhybrid, nanohybrid, nano-filled and nano-filled flowable composites were bio-aged with saliva biofilm for 30 days. Surface morphology, roughness, mechanical and aesthetic properties were determined. A 48 h saliva biofilm model was used to evaluate the microbial behavior of different composites in vitro. Biofilm metabolic activity, lactic acid production and live/dead bacterial staining were tested. Six volunteers were selected to wear intra-oral appliances with composite slabs for 24 h and biofilms were collected and analyzed using 16S rRNA sequencing to assess the biofilm formation over those materials in situ. Although there were increasing trends, surface roughness, water resorption and material solubility had no significant changes for all groups after bio-aging (p > 0.05). There were no significant changes in elastic modulus for all groups after aging (p > 0.05). However, a decrease in flexural strength in all groups was observed (p < 0.05), except for the nanoflow composite group (p > 0.05). The Vickers hardness remained stable in all groups after aging (p > 0.05), except for the nano-filled group (p < 0.05). The nanoflow composite showed distinct color changes compared to the micro-hybrid group after aging (p < 0.05). Biofilm metabolic activity and lactic acid production in vitro increased slightly after bio-aging in all groups, but with no statistical significance (p > 0.05). The Shannon index diversity of biofilms in situ decreased after aging (p < 0.05), while no significant difference was shown in species composition at the genus level in all groups (p > 0.05). Resin composites with different sized fillers displayed a relatively stable mechanical performance and uncompromised microbial behavior both in vitro and in situ after 30 days of bio-aging. Based on the results, composites with different filler types can be selected flexibly according to clinical needs. However, a longer time for bio-aging is still needed to confirm the mechanical properties and microbial behaviors of composites in the long run.

Oxygen Availability on the Application of Antimicrobial Photodynamic Therapy against Multi-Species Biofilms

Methylene blue (MB)- or Curcumin (Cur)-based photodynamic therapy (PDT) has been used as an adjunctive treatment for periodontitis. Its actual clinical efficacy is still in question because the lack of oxygen in a deep periodontal pocket might reduce the PDT efficacy. We aim to investigate the effect of oxygen on PDT efficacy and to examine if the addition of hydrogen peroxide (HP) could improve PDT performance anaerobically. To this end, we cultured 48 h saliva-derived multi-species biofilms and treated the biofilms with 25 µM MB or 40 µM Cur, HP (0.001%, 0.01% and 0.1%), light (L-450 nm or L-660 nm), or combinations thereof under ambient air or strictly anaerobic conditions. MB- and Cur-PDTs significantly reduced biofilm viability in air but not under anaerobic conditions. HP at 0.1% significantly enhanced the killing efficacies of both MB- and Cur-PDTs anaerobically. The killing efficacy of Cur-PDT combined with 0.1% HP was higher anaerobically than in air. However, this was not the case for MB-PDT combined with 0.1% HP. In conclusion, this study demonstrated that the biofilm killing efficacies of MB- and Cur-PDTs diminished when there was no oxygen. HP at 0.1% can enhance the efficacy of PDT performed anaerobically, but the level of enhancement is photosensitizer-dependent.

MBRA-2: a Modified Chemostat System to Culture Biofilms

Culture-dependent approaches for investigating microbial ecology aim to model the nutrient content of specific environments by simplifying the system for high-resolution molecular analysis. These in vitro systems are enticing due to their increased throughput compared to animal models, flexibility in modulating nutrient content and community composition, scaling of culture volume to isolate biological molecules, and control of environmental parameters, such as temperature, humidity, and nutrient flow. However, different devices are used to investigate homogenous, planktonic microbial communities and heterogeneous biofilms. Here, we present the minibioreactor array 2 (MBRA-2) with media rails, a benchtop multireactor system derived from the MBRA system that enables researchers to use the same system to grow planktonic and biofilm cultures. We simplified flow through the system and reduced contamination, leakage, and time required for array assembly by designing and implementing a reusable media rail to replace the branched tubing traditionally used to convey media through chemostat arrays. Additionally, we altered the structure of the six-bioreactor strip to incorporate a removable lid to provide easy access to the bioreactor wells, enabling biofilm recovery and thorough cleaning for reuse. Using Pseudomonas aeruginosa, a model biofilm-producing organism, we show that the technical improvements of the MBRA-2 for biofilms growth does not disrupt the function of the bioreactor array. IMPORTANCE The MBRA-2 with media rails provides an accessible system for investigators to culture heterogenous, suspended biofilms under constant flow.

Ecological influence by colonization of fluoride-resistant Streptococcus mutans in oral biofilm

Background

Dental caries is one of the oldest and most common infections in humans. Improved oral hygiene practices and the presence of fluoride in dentifrices and mouth rinses have greatly reduced the prevalence of dental caries. However, increased fluoride resistance in microbial communities is concerning. Here, we studied the effect of fluoride-resistant Streptococcus mutans (S. mutans) on oral microbial ecology and compare it with wild-type S. mutans in vitro.

Methods

Biofilm was evaluated for its polysaccharide content, scanning electron microscopy (SEM) imaging, acid-producing ability, and related lactic dehydrogenase (LDH), arginine deiminase (ADS), and urease enzymatic activity determination. Fluorescence in situ hybridization (FISH) and quantitative real-time polymerase chain reaction (qRT-PCR) were used to evaluate the S. mutans ratio within the biofilm. It was followed by 16S rRNA sequencing to define the oral microbial community.

Results

Fluoride-resistant S. mutans produced increased polysaccharides in presence of NaF (P < 0.05). The enzymatic activities related to both acid and base generation were less affected by the fluoride. In presence of 275 ppm NaF, the pH in the fluoride-resistant strain sample was lower than the wild type. We observed that with the biofilm development and accumulative fluoride concentration, the fluoride-resistant strain had positive relationships with other bacteria within the oral microbial community, which enhanced its colonization and survival. Compared to the wild type, fluoride-resistant strain significantly increased the diversity and difference of oral microbial community at the initial stage of biofilm formation (4 and 24 h) and at a low fluoride environment (0 and 275 ppm NaF) (P < 0.05). Kyoto Encyclopedia of Genes and Genomes (KEGG) analysis revealed that fluoride-resistant strain enhanced the metabolic pathways and glucose transfer.

Conclusions

Fluoride-resistant S. mutans affected the microecological balance of oral biofilm and its cariogenic properties in vitro, indicating its negative impact on fluoride's caries prevention effect.

The quorum quenching enzyme Aii20J modifies in vitro periodontal biofilm formation

Introduction

Recent studies have revealed the presence of N-acyl-homoserine lactones (AHLs) quorum sensing (QS) signals in the oral environment. Yet, their role in oral biofilm development remains scarcely investigated. The use of quorum quenching (QQ) strategies targeting AHLs has been described as efficient for the control of pathogenic biofilms. Here, we evaluate the use of a highly active AHL-targeting QQ enzyme, Aii20J, to modulate oral biofilm formation in vitro.

Methods

The effect of the QQ enzyme was studied in in vitro multispecies biofilms generated from oral samples taken from healthy donors and patients with periodontal disease. Subgingival samples were used as inocula, aiming to select members of the microbiota of the periodontal pocket niche in the in vitro biofilms. Biofilm formation abilities and microbial composition were studied upon treating the biofilms with the QQ enzyme Aii20J.

Results and Discussion

The addition of the enzyme resulted in significant biofilm mass reductions in 30 - 60% of the subgingival-derived biofilms, although standard AHLs could not be found in the supernatants of the cultured biofilms. Changes in biofilm mass were not accompanied by significant alterations of bacterial relative abundance at the genus level. The investigation of 125 oral supragingival metagenomes and a synthetic subgingival metagenome revealed a surprisingly high abundance and broad distribution of homologous of the AHL synthase HdtS and several protein families of AHL receptors, as well as an enormous presence of QQ enzymes, pointing to the existence of an intricate signaling network in oral biofilms that has been so far unreported, and should be further investigated. Together, our findings support the use of Aii20J to modulate polymicrobial biofilm formation without changing the microbiome structure of the biofilm. Results in this study suggest that AHLs or AHL-like molecules affect oral biofilm formation, encouraging the application of QQ strategies for oral health improvement, and reinforcing the importance of personalized approaches to oral biofilm control.

In vitro antimicrobial effects of chitosan on microcosm biofilms of oral candidiasis

OBJECTIVE

This study assessed the effects of chitosan (CS) on microcosm biofilms derived from saliva of patients with Candida-associated denture stomatitis.

METHODS

Five removable denture wearers with denture stomatitis were included in the study. The minimum inhibitory concentration (MIC) of CS against clinical isolates of Candida albicans was determined according to the broth microdilution method. Pooled saliva from the donors was used as an inoculum for the formation of biofilms, which were developed during 72 h on acrylic surfaces in the Amsterdam Active Attachment model. The biofilms were then treated with different concentrations of CS, and the antibiofilm effects were evaluated through the quantification of colony-forming units (CFUs), total biomass (TB), metabolic activity (MA), lactic acid production (LAP), and cell viability (by confocal laser scanning microscopy). Chlorhexidine, miconazole, and nystatin were tested as positive controls, while the negative control (NC) was the untreated biofilm. Data were analyzed by 1-way ANOVA and Fischer LSD's post hoc test (α=0.05).

RESULTS

MIC values of CS ranged from 500 to 800 µg/mL. For CFUs, 2500 µg/mL CS was the most effective treatment in reducing total anaerobes, mutans streptococci, and Lactobacillus spp., significantly differing from the controls. For C. albicans CFUs, CS and positive controls did not differ from each other but led to significant reductions compared to NC. Regarding TB, MA, LAP, and cell viability, 2500 µg/mL CS promoted the greatest reductions compared to NC.

CONCLUSION

CS has similar or superior effects to conventional active principles on important parameters of oral candidiasis microcosm biofilms.

CLINICAL RELEVANCE

The antibiofilm effects of CS show that this compound has great potential to improve the clinical condition of denture stomatitis patients, and formulations containing this natural polymer could be useful for controlling oral candidiasis.

Cymbopogon citratus Essential Oil Increases the Effect of Digluconate Chlorhexidine on Microcosm Biofilms

The aim of this study was to evaluate the effect of the Cymbopogon citratus essential oil and its association with chlorhexidine on cariogenic microcosm biofilm composition and acidogenicity. Minimum inhibitory and bactericide concentrations from the essential oil and chlorhexidine were determined by broth microdilution assay. Microcosms (polymicrobial) biofilms were produced on glass coverslips, using inoculum from human saliva in McBain culture medium (0.5% sucrose exposure for 6 h/day) for 3 days in 24-well plates. The biofilms were treated twice a day and their composition was evaluated by microorganism quantification. The acidogenicity was evaluated by measuring the pH of the spent culture medium in contact with the biofilm. Overall, the association of C. citratus and chlorhexidine reduced total bacterial counts and aciduric bacteria (maximum reduction of 3.55 log UFC/mL) in microcosm biofilms. This group also presented the lowest acidogenicity even when exposed to sucrose-containing medium. C. citratus essential oil increases the effect of digluconate chlorhexidine on microcosm biofilms. Based on these findings, this study can contribute to the development of new formulations that might allow for the use of mouthwashes for a shorter period, which may reduce undesirable effects and increase patient compliance to the treatment.

Variation in adhesion of Streptococcus mutans and Porphyromonas gingivalis in saliva-derived biofilms on raw materials of orthodontic brackets

Objective

To evaluate differences in the adhesion levels of the most common oral pathogens, Streptococcus mutans and Porphyromonas gingivalis, in human saliva-derived microcosm biofilms with respect to time and raw materials of orthodontic brackets.

Methods

The samples were classified into three groups of bracket materials 1) monocrystalline alumina ceramic (CR), 2) stainless steel metal (SS), and 3) polycarbonate plastic (PL), and a hydroxyapatite (HA) group was used to mimic the enamel surface. Saliva was collected from a healthy donor, and saliva-derived biofilms were grown on each sample. A real-time polymerase chain reaction was performed to quantitatively evaluate differences in the attachment levels of total bacteria, S. mutans and P. gingivalis at days 1 and 4.

Results

Adhesion of S. mutans and P. gingivalis to CR and HA was higher than the other bracket materials (SS = PL < CR = HA). Total bacteria demonstrated higher adhesion to HA than to bracket materials, but no significant differences in adhesion were observed among the bracket materials (CR = SS = PL < HA). From days 1 to 4, the adhesion of P. gingivalis decreased, while that of S. mutans and total bacteria increased, regardless of material type.

Conclusions

The higher adhesion of oral pathogens, such as S. mutans and P. gingivalis to CR suggests that the use of CR brackets possibly facilitates gingival inflammation and enamel decalcification during orthodontic treatment.

Effects of sodium hexametaphosphate microparticles or nanoparticles on the growth of saliva-derived microcosm biofilms

OBJECTIVES

This study evaluated the effects of sodium hexametaphosphate microparticles (HMPmicro) or nanoparticles (HMPnano) on the growth of saliva-derived microcosm biofilms MATERIALS AND METHODS: Saliva-derived biofilms were formed on glass coverslips for 24 h. Thereafter, Streptococcus mutans (C180-2) was incorporated or not into the biofilms. From that time point onwards, solutions containing 0.2% HMPmicro or HMPnano, combined or not with 220 ppm F, were constantly present in the culture medium. In addition, 220 ppm F alone (220F) and McBain medium without any compound were also tested as positive and negative controls (CTL), respectively. After 96 h, the biofilms were plated on anaerobic blood agar or sucrose agar bacitracin for total and S. mutans CFU-counting, respectively. Biofilms' lactic acid production was analysed spectrophotometrically. Data were submitted to ANOVA or Kruskal-Wallis' tests, followed by Student-Newman-Keuls' test (p<0.05; n=12).

RESULTS

HMPmicro or HMPnano led to significantly lower lactic acid production, and significant reductions in total CFU-counting in microcosm biofilms, supplemented or not with S. mutans, in comparison to both controls, with significant differences between 220F and CTL. No significant differences were observed among the groups treated with HMPmicro or HMPnano (with or without F). The same trend was seen for S. mutans CFU-counting, in biofilms supplemented with S. mutans.

CONCLUSIONS

HMP significantly reduced total and S. mutans CFU counts, as well as lactic acid production by saliva-derived microcosm biofilms.

CLINICAL RELEVANCE

These findings in saliva-derived microcosm biofilms suggest that HMP stands as a promising alternative for the control of cariogenic biofilms.

[Analysis of etiological characteristics and establishment of prediction model of postoperative infections in patients undergoing oral squamous cell carcinoma surgery with free flap reconstruction]

OBJECTIVE

To investigate the characteristics of pathogen infection and to establish a prediction model of infections in oral squamous cell carcinoma patients undergoing surgery with free flap reconstruction.

METHODS

The retrospective cohort study consisted of 1 596 patients undergoing tumor resection and free flap reconstruction for oral squamous cell carcinoma from January 2018 to December 2020. According to the postoperative infection, the patients were divided into the infected group (n=154) and non-infected group (n=1 442). The characteristics of pathogens were analyzed in the infected patients. The primary outcome variable was postoperative infection, and Logistic regression was used to determine risk factors of the infection. The prediction model was established and the discriminatory accuracy of the model was evaluated using receiver operating characteristic (ROC) curve.

RESULTS

Totally 154 cases were infected in the 1 596 cases undergoing surgery with free flap reconstruction, and the infection rate was 9.65%. The most frequent sites of infection were the surgical wound and respiratory tract. A total of 268 pathogens were isolated and cultured, including 240 strains of Gram-negative bacteria, accounting for 89.55%, mainly Pseudomonas aeruginosa and Klebsiella pneumoniae; 23 strains of Gram-positive bacteria, accounting for 8.58%, mainly Enterococcus faecalis and Staphylococcus aureus; and 5 strains of fungi, accounting for 1.87%. The isolated Pseudomonas aeruginosa had high resistant rate to imipenem and meropenem, and was sensitive to antibiotics, such as ciprofloxacin. The isolated Staphylococcus aureus had high resistant rate to erythromycin and clindamycin, and was sensitive to vancomycin. According to the multivariate Logistic analysis, four independent variables were significantly associated with an increased risk of postoperative infection (P < 0.05): clinical N category≥1, the American Society of Anesthesiologists (ASA) grade ≥2, tracheotomy and length of hospital stay >13 d. The prediction model was established based on these factors and the expression of the risk prediction model was as follows: predicted probability value P=1/(1+e^-a), a=-0.803+0.674×(clinical N category ≥1)+0.518×(the ASA grade ≥2)+0.918×(tracheotomy)+1.581×(length of hospital stay >13 d), Hosmer-Lemeshow χ²=10.647, P=0.223, the degree of fitting of the model was good. The area under the ROC curve was 0.818 and 95%CI of the model for predicting infection was 0.789-0.846.

CONCLUSION

Oral squamous cell carcinoma patients undergoing surgery with free flap reconstruction are prone to have a high incidence of postoperative infection and Gram-negative bacteria are the main pathogens causing an infection. The established prediction model is of good predictive effect. Rational antimicrobial use coupled with awareness of infection control measures is paramount to reduce the incidence of postoperative infection in the oral squamous cell carcinoma patients undergoing surgery with free flap reconstruction.

In vitro model systems for exploring oral biofilms: From single-species populations to complex multi-species communities

Numerous in vitro biofilm model systems are available to study oral biofilms. Over the past several decades, increased understanding of oral biology and advances in technology have facilitated more accurate simulation of intraoral conditions and have allowed for the increased generalizability of in vitro oral biofilm studies. The integration of contemporary systems with confocal microscopy and 16S rRNA community profiling has enhanced the capabilities of in vitro biofilm model systems to quantify biofilm architecture and analyse microbial community composition. In this review, we describe several model systems relevant to modern in vitro oral biofilm studies: the constant depth film fermenter, Sorbarod perfusion system, drip-flow reactor, modified Robbins device, flowcells and microfluidic systems. We highlight how combining these systems with confocal microscopy and community composition analysis tools aids exploration of oral biofilm development under different conditions and in response to antimicrobial/anti-biofilm agents. The review closes with a discussion of future directions for the field of in vitro oral biofilm imaging and analysis.

Mucoadhesive controlled-release formulations containing morin for the control of oral biofilms

This study aimed to evaluate the antimicrobial and anti-biofilm activity of morin on polymicrobial biofilms and its cytotoxicity in controlled-release films and tablets based on gellan gum. Polymicrobial biofilms were formed from saliva for 48 h under an intermittent exposure regime to 1% sucrose and in contact with films or tablets of gellan gum containing 2 mg of morin each. Acidogenicity, bacterial viability, dry weight and insoluble extracellular polysaccharides from biofilms were evaluated. The cytotoxicity of morin was evaluated in oral keratinocytes. Morin released from the systems reduced the viability of all the microbial groups evaluated, as well as the dry weight and insoluble polysaccharide concentration in the matrix and promoted the control of acidogenicity when compared with the control group without the substance. Morin was cytotoxic only at the highest concentration evaluated. In conclusion, morin is an effective agent and shows antimicrobial and anti-biofilm activity against polymicrobial biofilms.

Novel calcium phosphate ion-rechargeable and antibacterial adhesive to inhibit dental caries

OBJECTIVES

This study aimed to develop an antibacterial and calcium (Ca) and phosphate (P) rechargeable adhesive and investigate the effects of dimethylaminododecyl methacrylate (DMAHDM) and nanoparticles of amorphous calcium phosphate (NACP) on dentin bonding, biofilm response, and repeated Ca and P ion recharge and re-release capability for the first time.

MATERIALS AND METHODS

Pyromellitic glycerol dimethacrylate (PMGDM), ethoxylated bisphenol A dimethacrylate (EBPADMA), 2-hydroxyethyl methacrylate (HEMA), and bisphenol A glycidyl dimethacrylate (BisGMA) formed the adhesive (PEHB). Three groups were tested: (1) Scotchbond (SBMP, 3 M) control, (2) PEHB + 30% NACP, and (3) PEHB + 30% NACP + 5% DMAHDM. Specimens were tested for dentin shear bond strength, and Ca and P ion release, recharge, and re-release. Biofilm lactic acid production and colony-forming units (CFU) on resins were analyzed.

RESULTS

The four groups had similar dentin shear bond strengths (p > 0.1). Adhesive with DMAHDM showed significant decrease in metabolic activity, lactic acid production, and biofilm CFU (p < 0.05). The adhesives containing NACP released high levels of Ca and P ions initially and after being recharged.

CONCLUSION

This study developed the first Ca and P ion-rechargeable and antibacterial adhesive, achieving strong antibacterial activity and Ca and P ion recharge and re-release for long-term remineralization.

CLINICAL RELEVANCE

Considering the restoration-tooth bonded interface being the weak link and recurrent caries at the margins being the primary reason for restoration failures, this novel calcium phosphate-rechargeable and antibacterial adhesive is promising for a wide range of tooth-restoration applications to inhibit caries.

Establishment of novel in vitro culture system with the ability to reproduce oral biofilm formation on dental materials

Intensive research has been conducted with the aim of developing dental restorative/prosthetic materials with antibacterial and anti-biofilm effects that contribute to controlling bacterial infection in the oral cavity. In situ evaluations were performed to assess the clinical efficacy of these materials by exposing them to oral environments. However, it is difficult to recruit many participants to collect sufficient amount of data for scientific analysis. This study aimed to assemble an original flow-cell type bioreactor equipped with two flow routes and assess its usefulness by evaluating the ability to reproduce in situ oral biofilms formed on restorative materials. A drop of bacterial suspension collected from human saliva and 0.2% sucrose solution was introduced into the assembled bioreactor while maintaining the incubation conditions. The bioreactor was able to mimic the number of bacterial cells, live/dead bacterial volume, and volume fraction of live bacteria in the in situ oral biofilm formed on the surface of restorative materials. The usefulness of the established culture system was further validated by a clear demonstration of the anti-biofilm effects of a glass-ionomer cement incorporating zinc-releasing glasses when evaluated by this system.

Influence of caries activity and number of saliva donors: mineral and microbiological responses in a microcosm biofilm model

Objective

this study evaluated the mineral and microbiological response of biofilms originating from different types of saliva inoculum with distinct levels of caries activity.

Methodology

the biofilms grown over enamel specimens originated from saliva collected from a single donor or five donors with two distinct levels of caries activity (caries-active and caries-free) or from pooling saliva from ten donors (five caries-active and five caries-free). The percentage surface hardness change (%SHC) and microbiological counts served as outcome variables.

Results

the caries activity of donors did not affect the %SHC values. Inoculum from five donors compared to a single donor showed higher %SHC values (p=0.019). Higher lactobacilli counts were observed when saliva from caries-active donors was used as the inoculum (p=0.017). Pooled saliva from both caries activity levels showed higher mutans streptococci counts (p<0.017).

Conclusion

Overall, pooled saliva increased the mineral response of the derived biofilms, but all the inoculum conditions formed cariogenic biofilms and caries lesions independently of caries activity.

Effects of Antifungal Carriers Based on Chitosan-Coated Iron Oxide Nanoparticles on Microcosm Biofilms

Resistance of Candida species to conventional therapies has motivated the development of antifungal nanocarriers based on iron oxide nanoparticles (IONPs) coated with chitosan (CS). This study evaluates the effects of IONPs-CS as carriers of miconazole (MCZ) or fluconazole (FLZ) on microcosm biofilms. Pooled saliva from two healthy volunteers supplemented with C. albicans and C. glabrata was the inoculum for biofilm formation. Biofilms were formed for 96 h on coverslips using the Amsterdam Active Attachment model, followed by 24 h treatment with nanocarriers containing different concentrations of each antifungal (78 and 156 µg/mL). MCZ or FLZ (156 µg/mL), and untreated biofilms were considered as controls. Anti-biofilm effects were evaluated by enumeration of colony-forming units (CFUs), composition of the extracellular matrix, lactic acid production, and structure and live/dead biofilm cells (confocal laser scanning microscopy-CLSM). Data were analyzed by one-way ANOVA and Fisher LSD's test (α = 0.05). IONPs-CS carrying MCZ or FLZ were the most effective treatments in reducing CFUs compared to either an antifungal agent alone for C. albicans and MCZ for C. glabrata. Significant reductions in mutans streptococci and Lactobacillus spp. were shown, though mainly for the MCZ nanocarrier. Antifungals and their nanocarriers also showed significantly higher proportions of dead cells compared to untreated biofilm by CLSM (p < 0.001), and promoted significant reductions in lactic acid, while simultaneously showing increases in some components of the extracellular matrix. These findings reinforce the use of nanocarriers as effective alternatives to fight oral fungal infections.

Antibiofilm coatings based on protein-engineered polymers and antimicrobial peptides for preventing implant-associated infections

Implant-associated infections (IAIs) are one of the leading concerns in orthopedics and dentistry as they commonly lead to implant failure. The presence of biofilms and, increasingly frequently, drug-resistant bacteria further impairs the efficacy of conventional antibiotics. Immobilization of antimicrobial peptides (AMPs) on implant surfaces is a promising alternative to antibiotics for prevention of IAIs. In addition, the use of functional linkers for the AMP tethering enables to increase the antimicrobial potential and the bioactivities of the coating. In this study, an extracellular-matrix-mimicking system based on elastin-like recombinamers (ELRs) has been developed for the covalent anchoring of AMPs and investigated for use as a hybrid antibiofilm coating. A drip-flow biofilm reactor was used to simulate in vivo environmental dynamic conditions, thus showing that the presence of the AMPs in the hybrid coatings provided strong antibiofilm activity against monospecies and microcosm biofilm models of clinical relevance. These results, together with an excellent cytocompatibility towards primary gingival fibroblasts, encourage the use of ELRs as multivalent platforms for AMPs and open up a wide range of possibilities in the biofabrication of advanced coatings combining the antibiofilm potential of AMPs and the outstanding tunability and biomechanical properties of the ELRs.

Establishment of microcosm biofilm models that reproduce a cariogenic diet intake

Biofilms were developed from human saliva on bovine enamel discs in four experimental conditions to investigate dental caries development: feast and famine (M1), abundance and scarcity (M2), three meals daily (M3), and three meals plus two snacks daily (M4). The main difference between these models was the diet for microbial growth. The evaluations included verifying the pH of the spent culture media and analyzing the enamel discs for demineralization (microhardness and roughness) and biofilms (biomass, viable populations of mutans streptococci, and total microbiota). Two major behaviors were observed: M1 and M2 promoted an acidic environment, while M3 and M4 maintained pH values closer to neutral. The demineralization process was slower in the neutral groups but more pronounced in M3, while a greater increase in microbiota and biomass was observed over time for both neutral groups. Thus, the M3 model was better at mimicking the oral environment that leads to demineralization.

The role of sodium alginate and gellan gum in the design of new drug delivery systems intended for antibiofilm activity of morin

The use of controlled drug delivery systems represents an alternative and promising strategy for the use of antimicrobials in the oral cavity. Microparticles, films and oral tablets based on alginate and gellan gum were developed also as a strategy to overcome the low aqueous solubility of morin. The systems were characterized in terms of morphological characteristics, mucoadhesion and in vitro drug release. Antibiofilm activity was analyzed for acidogenicity, microbial viability and the composition of the extracellular matrix of single-species biofilms. Scanning Electron Microscopy demonstrated that the microparticles were spherical, rough and compact. The film and the tablet presented smooth and continuous surface and in the inner of the tablet was porous. These systems were more mucoadhesive compared to the microparticles. The in vitro morin release profiles in artificial saliva demonstrated that the microparticles controlled the release better (39.6%), followed by the film (41.1%) and the tablet (91.4%) after 20 h of testing. The morin released from the systems reduced the acidogenicity, microbial viability, concentration of insoluble extracellular polysaccharides and dry weight of biofilms, when compared to the control group. The findings of this study showed that the morin has antibiofilm activity against cariogenic microorganisms.

Characterization of polymicrobial biofilms obtained from saliva or carious lesions in dentin

This study aimed to compare the formation of polymicrobial biofilms using carious dentin or saliva as inoculum for application in in vitro microbiological studies on caries research. For biofilm growth, combined samples of infected dentin or saliva from three donors were used. The biofilms were grown on glass coverslips, under a regimen of intermittent exposure (6 h day^-1) to 1% sucrose for 4 days. Total bacterial loads, as well as specific aciduric bacteria and mutans streptococci loads were quantified and correlated with biofilm acidogenicity and susceptibility to chlorhexidine. The data were evaluated using the Student's-t, Mann Whitney and Kruskal-Wallis tests. The two biofilms showed similar microbial loads (total bacteria, aciduric bacteria and mutans streptococci) on day 4, and high acidogenicity after 48 h and were susceptible to chlorhexidine at different time intervals. In conclusion, both dentin and saliva can be used as an inoculum in in vitro studies of processes related to biofilm formation.

Development of a multispecies periodontal biofilm model within a stirred bioreactor

The objective of this work was to develop a subgingival biofilm model using a stirred bioreactor. Discs of bovine teeth were adapted to a stirred bioreactor filled with a culture medium containing bacterial species associated with periodontal health or disease. After anaerobic incubation, the biofilms growing on the substratum surfaces were collected and analyzed. The mean number of Colony-forming Units (CFUs) varied, but with no difference between 3 and 7 days of biofilm formation (p > 0.05). Scanning Electron Microscopy (SEM) analysis showed a uniform biofilm layer covering the cement layer of the root surface containing bacteria with diverse morphology. In checkerboard DNA-DNA hybridization, bacterial species were identified in both biofilms. In conclusion, a subgingival biofilm model was developed using a stirred bioreactor, allowing the in vitro reproduction of complex microbial communities. This is an advanced model that may be useful to mimic complex clinical periodontal biofilms.

Short-Chain N-Acylhomoserine Lactone Quorum-Sensing Molecules Promote Periodontal Pathogens in In Vitro Oral Biofilms

Acylhomoserine lactones (AHLs), the quorum-sensing (QS) signals produced by a range of Gram-negative bacteria, are involved in biofilm formation in many pathogenic and environmental bacteria. Nevertheless, the current paradigm excludes a role of AHLs in dental plaque formation, while other QS signals, such as AI-2 and autoinducer peptides, have been demonstrated to play an important role in biofilm formation and virulence-related gene expression in oral pathogens. In the present work, we have explored the effect of externally added AHLs on in vitro oral biofilm models for commensal, cariogenic, and periodontal dental plaque. While little effect on bacterial growth was observed, some AHLs specifically affected the lactic acid production and protease activity of the biofilms. Most importantly, the analysis of bacterial diversity in the biofilms showed that the addition of C₆-homoserine lactone (C₆-HSL) results in a shift toward a periodontal bacterial composition profile by increasing the relative presence of the orange-complex bacteria Peptostreptococcus and Prevotella These results point to a relevant role of AHL-mediated QS in dental plaque formation and might be involved in the development of dysbiosis, the mechanism of which should be further investigated. This finding potentially opens new opportunities for the prevention or treatment of the periodontal disease.IMPORTANCE Dental plaque is omnipresent in healthy oral cavities and part of our commensal microbial colonization. At the same time, dental plaque is the cause of the most common human diseases, caries and gum disease. Dental plaque consists of billions of microbes attached to the surface of your teeth. Communication among these microbes is pivotal for development of these complex communities yet poorly studied in dental plaque. In the present study, we show that a specific communication molecule induces changes within the community related to the development of gum disease. This finding suggests that interfering with microbial communication may represent an interesting novel strategy to prevent gum disease that should be further investigated.

Lipidomic profiling of non-mineralized dental plaque and biofilm by untargeted UHPLC-QTOF-MS/MS and SWATH acquisition

Dental plaque is a structurally organized biofilm which consists of diverse microbial colonies and extracellular matrix. Its composition may change when pathogenic microorganisms become dominating. Therefore, dental biofilm or plaque has been frequently investigated in the context of oral health and disease. Furthermore, its potential as an alternative matrix for analytical purposes has also been recognized in other disciplines like archeology, food sciences, and forensics. Thus, a careful in-depth characterization of dental plaque is worthwhile. Most of the conducted studies focused on the screening of microbial populations in dental plaque. Their lipid membranes, on the other hand, may significantly impact substance (metabolite) exchange within microbial colonies as well as xenobiotics uptake and incorporation into teeth. Under this umbrella, a comprehensive lipidomic profiling for determination of lipid compositions of in vivo dental plaque samples and of in vitro cultivated biofilm as surrogate matrix to be used for analytical purposes has been performed in this work. An untargeted lipidomics workflow utilizing a ultra-high-performance liquid chromatography (UHPLC)-quadrupole-time-of-flight (QTOF) platform together with comprehensive SWATH (sequential window acquisition of all theoretical fragment ion mass spectra) acquisition and compatible software (MS-DIAL) that comprises a vast lipid library has been adopted to establish an extensive lipidomic fingerprint of dental plaque. The main lipid components in dental plaque were identified as triacylglycerols, followed by cholesterol, cholesteryl esters as well as diacylglycerols, and various phospholipid classes. In vivo plaque is a rare matrix which is usually available in very low amounts. When higher quantities for specific research assays are required, efficient ways to produce an appropriate surrogate matrix are mandatory. A potential surrogate matrix substituting dental plaque was prepared by cultivation of in vitro biofilm from saliva and similarities and differences in the lipidomics profile to in vivo plaque were mapped by statistical evaluation post-analysis. It was discovered that most lipid classes were highly elevated in the in vitro biofilm samples, in particular diacylglycerols, phosphatidylglycerols, and phosphatidylethanolamines (PEs). Furthermore, an overall shift from even-chain lipid species to odd-chain lipids was observed in the cultivated biofilms. On the other hand, even-chain phosphatidylcholines (PCs), lysoPCs, cholesteryl esters, and cholesterol-sulfate were shown to be specifically increased in plaque samples.

Novel Dental Poly (Methyl Methacrylate) Containing Phytoncide for Antifungal Effect and Inhibition of Oral Multispecies Biofilm

Despite the many advantages of poly (methyl methacrylate) (PMMA) as a dental polymer, its antifungal and antibacterial effects remain limited. Here, phytoncide was incorporated into PMMA to inhibit fungal and biofilm accumulation without impairing the basic and biological properties of PMMA. A variable amount of phytoncide (0 wt % to 5 wt %) was incorporated into PMMA, and the basic material properties of microhardness, flexural strength and gloss were evaluated. In addition, cell viability was confirmed by MTT assay. This MTT assay measures cell viability via metabolic activity, and the color intensity of the formazan correlates viable cells. The fungal adhesion and viability on the PMMA surfaces were evaluated using Candida albicans (a pathogenic yeast). Finally, the thickness of saliva-derived biofilm was estimated. The flexural strength of PMMA decreased with increasing phytoncide contents, whereas there were no significant differences in the microhardness and gloss (p > 0.05) and the cell viability (p > 0.05) between the control and the phytoncide-incorporated PMMA samples. The amounts of adherent Candida albicans colony-forming unit (CFU) counts, and saliva-derived biofilm thickness were significantly lower in the phytoncide-incorporated PMMA compared to the control (p < 0.05). Hence, it was concluded that the incorporation of appropriate amounts of phytoncide in PMMA demonstrated antifungal effects while maintaining the properties, which could be a possible use in dentistry application such as denture base resin.

Multifunctional antibacterial dental sealants suppress biofilms derived from children at high risk of caries

Dental sealant containing antibacterial and bioactive agents decreased biofilm formation due to the saliva of children at low and high risk of caries.

Novel Poly(Methyl Methacrylate) Containing Nanodiamond to Improve the Mechanical Properties and Fungal Resistance

Herein we evaluate the effect of nanodiamond (ND) incorporation on the mechanical properties of poly(methyl methacrylate) (PMMA) nanocomposite. Three quantities of ND (0.1, 0.3, and 0.5 wt.%) were tested against the control and zirconium oxide nanoparticles (ZrO). Flexural strength and elastic modulus were measured using a three-point bending test, surface hardness was evaluated using the Vickers hardness test, and surface roughness was evaluated using atomic force microscopy (AFM), while fungal adhesion and viability were studied using Candida albicans. Samples were also analyzed for biofilm thickness and biomass in a saliva-derived biofilm model. All groups of ND-PMMA nanocomposites had significantly greater mean flexural strengths and statistically improved elastic modulus, compared to the control and ZrO groups (P < 0.001). The Vickers hardness values significantly increased compared to the control group (P < 0.001) with 0.3% and 0.5% ND. ND addition also gave significant reduction in fungal adhesion and viability (P < 0.001) compared to the control group. Finally, salivary biofilm formation was markedly reduced compared to the ZrO group. Hence, the incorporation of 0.1–0.5 wt.% ND with auto- polymerized PMMA resin significantly improved the flexural strength, elastic modulus, and surface hardness, and provided considerable fungal resistance.

Intraoral appliances for in situ oral biofilm growth: a systematic review

Background: Oral biofilms are the root cause of major oral diseases. As in vitro biofilms are not representative of the intraoral milieu, various devices have been manufactured over the years to develop Appliance Grown Oral Biofilm (AGOB). Objective: To review various intraoral appliances used to develop AGOB for microbiological analysis, and to judge the optimal means for such analyses. Design: Four databases (PubMed, Science Direct, Scopus and Medline) were searched by two independent reviewers, and articles featuring the key words 'device' OR 'splint' OR 'appliance'; 'Oral biofilm' OR 'dental plaque'; 'in vivo' OR 'in situ'; 'Microbiology' OR 'Bacteria' OR 'microbiome'; were included. The standard Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) were adopted for data gathering. Results: Of the 517 articles which met the initial inclusion criteria, 24 were deemed eligible for review. The age of the AGOB, sampled at various intervals, ranged from 30 min to 28 days. The most commonly used microbiome analytical methods were fluorescence microscopy, total cell count using conventional, and molecular tools including Next Generation Sequencing (NGS) platforms. Conclusions: No uniformly superior method for collecting AGOB could be discerned. NGS platforms are preferable for AGOB analyses.

Bioactive resin-based composite with surface pre-reacted glass-ionomer filler and zwitterionic material to prevent the formation of multi-species biofilm

OBJECTIVE

This study evaluated the synergetic effect between surface pre-reacted glass-ionomer (SPRG) filler and 2-methacryloyloxyethyl phosphorylcholine (MPC), for inhibiting multi-species biofilm formation, while maintaining or even improving the original beneficial features of SPRG-filled resin-based composite (RBC).

METHODS

MPC (1.5-10wt%) was incorporated into commercial SPRG-filled RBC. Then, the inherent properties of RBC, and ion release and acid-neutralising properties associated with SPRG were investigated. Further, protein adsorptions and bacterial adhesion and viability on the SPRG-filled RBC surfaces were studied using four kinds of oral bacteria; Streptococcus mutans, Actinomyces naeslundii, Veillonella parvula, and Porphyromonas gingivalis. Finally, the thickness and biomass of the human saliva-derived biofilm model cultured on test and control samples were analysed.

RESULTS

Addition of MPC content resulted in decreased flexural strength and wettability of SPRG-filled RBC. SPRG-filled RBC released significantly higher amounts of multiple ions as contents of MPC increased. Meanwhile, SPRG-filled RBC with 5-wt% MPC significantly improved acid-neutralising properties than those of other test and control samples (P<0.001). SPRG-filled RBC with 3wt% MPC significantly reduced the amount of adsorbed bovine serum albumin and proteins from the brain heart infusion medium as compared to the control (P<0.01). A similar trend was observed in the attachment of four types of bacteria and multi-species biofilm (P<0.01).

SIGNIFICANCE

Despite limitation in terms of deteriorations of some physical properties, addition of 3% MPC to SPRG-filled RBC leads to inhibition of the attachment of multi-species bacteria on its surface, as well as inhibition of biofilm growth. Moreover, the original important bioactive features of SPRG-filled RBC such as ion release and acid neutralisations are either maintained or improved upon adding MPC.

Casein Phosphopeptide-Amorphous Calcium Phosphate Attenuates Virulence and Modulates Microbial Ecology of Saliva-Derived Polymicrobial Biofilms

BACKGROUND

Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) acts as a salivary biomimetic that provides bioavailable calcium and phosphate ions to augment fluoride-mediated remineralisation of early caries lesions. However, there are indications that it may also have beneficial ecological effects on the oral microbiome.

OBJECTIVE

This in vitro study investigated whether CPP-ACP could influence microbial counts, acidogenicity, and the relative abundance of specific caries- and health-associated bacterial -species in polymicrobial biofilms.

METHODS

Saliva-derived polymicrobial biofilms were grown for 96 h in a cariogenic environment and treated every 12 h with 2% CPP-ACP or vehicle control. Colony forming units (CFUs) and acidogenicity were estimated from the treated biofilms. Microbial ecological effects of CPP-ACP were assessed based on the relative abundance of 14 specific caries- and health-associated -bacterial species using a real-time quantitative PCR assay. -Results: CPP-ACP-treated biofilms showed relatively modest, but significant, reductions in microbial CFUs (21% reduction, p = 0.008) and acidogenicity (33% reduction, p < 0.001), compared to the control-treated biofilms. The CPP-ACP treated biofilms also exhibited significantly lower bacterial loads of cariogenic Scardovia wiggsiae (fold change 0.017, p < 0.001) and Prevotella denticola(fold change 0.005, p < 0.001), and higher bacterial loads of commensal Streptococcus sanguinis(fold change 30.22, p < 0.001), S. mitis/oralis(fold change 9.66, p = 0.012), and S. salivarius/thermophilus(fold change 89.35, p < 0.001) than the control-treated biofilms.

CONCLUSIONS

The results indicate that CPP-ACP has virulence-attenuating attributes that can influence a beneficial microbial ecological change in the biofilm.

Visualization and Quantification of the Oral Hygiene Effects of Brushing, Dentifrice Use, and Brush Wear Using a Tooth Brushing Simulator

Approaches that reproduce dental hygiene regimens under controlled conditions have applications in preclinical research. We have applied standardized, reproducible brushing regimes to typodonts coated in simulated or biological plaques to assess the effects on tooth cleaning of toothbrush/dentifrice regimens. Replicated typodonts were coated with Occlude^TM or Glogerm^TM indicators to simulate plaque, and brushed reproducibly using a mechanical brushing simulator to compare the cleaning of occlusal surfaces before and after brushing with water or a dentifrice. An in vitro model using salivary inocula to cultivate oral biofilms on typodont surfaces was then developed to evaluate removal of disclosed plaque by new toothbrushes in comparison to toothbrushes with wear equivalent to 3 months of use. Analyses of typodonts brushed under controlled conditions significantly (p < 0.01) distinguished between brushed and unbrushed surfaces and between the use of water vs. dentifrice for the removal of simulated interproximal plaque (p < 0.05). New toothbrushes removed significantly (p < 0.05) more biological plaque from typodont surfaces than brushes that had been worn by repeated brushing. Through controlled and defined brushing of typodonts with simulated and biological plaques, the effectiveness of dental hygiene regimens was compared under reproducible conditions. Data indicate that the cleaning effectiveness of brushing was augmented by the addition of dentifrice and that new brushes were significantly more effective than brushes with substantial wear from previous use. Whilst we have focussed on the occlusal surfaces of molars and worn brushes, the method could be applied to a range of other tooth surfaces and oral hygiene regimens.

Current Status of In Vitro Models and Assays for Susceptibility Testing for Wound Biofilm Infections

Biofilm infections have gained recognition as an important therapeutic challenge in the last several decades due to their relationship with the chronicity of infectious diseases. Studies of novel therapeutic treatments targeting infections require the development and use of models to mimic the formation and characteristics of biofilms within host tissues. Due to the diversity of reported in vitro models and lack of consensus, this review aims to provide a summary of in vitro models currently used in research. In particular, we review the various reported in vitro models of Pseudomonas aeruginosa biofilms due to its high clinical impact in chronic wounds and in other chronic infections. We assess advances in in vitro models that incorporate relevant multispecies biofilms found in infected wounds, such as P. aeruginosa with Staphylococcus aureus, and additional elements such as mammalian cells, simulating fluids, and tissue explants in an attempt to better represent the physiological conditions found at an infection site. It is hoped this review will aid researchers in the field to make appropriate choices in their proposed studies with regards to in vitro models and methods.

Effect of polyphenol-rich cranberry extracts on cariogenic biofilm properties and microbial composition of polymicrobial biofilms

OBJECTIVE

To investigate the effect of cranberry extracts on saliva-derived polymicrobial biofilms with regards to biofilm biomass, acidogenicity, exopolysaccharide (EPS)/microbial biovolumes, colony forming unit (CFU) counts, and the relative abundance of specific caries- and health-associated bacteria.

METHODS

Saliva-derived polymicrobial biofilms were grown for 96 h in a cariogenic environment and treated for 2 min every 12 h over the entire biofilm growth period with 500 μg/mL cranberry extract or vehicle control. The effect of the cranberry extract on biofilm behaviour was evaluated using different assays and its influence on key cariogenic and health-associated bacterial populations was assessed with a microarray real-time quantitative PCR method.

RESULTS

Cranberry-treated biofilms showed significant drops in biomass (38% reduction, P <  0.001), acidogenicity (44% reduction, P <  0.001), EPS/microbial biovolume ratios (P =  0.033), and CFU counts (51% reduction, P =  0.001). Furthermore, the cranberry extracts effected a significantly lower relative abundance of caries-associated Streptococcus sobrinus (fold change 0.004, P =  0.002) and Provotella denticola (0.002, P <  0.001), and a significantly higher relative abundance of the health-associated Streptococcus sanguinis (fold change 90.715, P =  0.001).

CONCLUSIONS

The cranberry extract lowered biofilm biomass, acidogenicity, EPS/microbial biovolumes, CFU counts, and modulated a beneficial microbial ecological change in saliva-derived polymicrobial biofilms.

Novel rechargeable calcium phosphate nanoparticle-filled dental cement

The objectives were to develop a novel rechargeable cement containing amorphous calcium-phosphate nanoparticles (nanoACP) to suppress tooth decay. Five cements were made with: (1) 60% glass particles (experimental control); (2) 40% glass+20% nanoACP; (3) 30% glass+30% nanoACP; (4) 20% glass+40% nanoACP; (5) 10% glass+50% nanoACP. Groups 1-4 had enamel bond strengths similar to Transbond XT (3M) and Vitremer (3M) (p>0.1). The nanoACP cement had calcium and phosphate ion release which increased with increasing nanoACP fillers. The recharged cement had substantial ion re-release continuously for 14 days after a single recharge. Ion re-release did not decrease with increasing recharge/re-release cycles. Groups 3-5 maintained a safe pH of medium (>5.5); however, control cements had cariogenic pH of medium (<4.5) due to biofilm acid. Therefore, nanoACP cement (1) had good bond strength to enamel, (2) possessed calcium and phosphate ion recharge/re-release capability, and (3) raised biofilm pH to a safe level to inhibit caries.

Protein-repellent nanocomposite with rechargeable calcium and phosphate for long-term ion release

OBJECTIVE

There has been no report on the effect of incorporating protein repellent 2-methacryloyloxyethyl phosphorylcholine (MPC) into a composite containing nanoparticles of amorphous calcium phosphate (NACP) on calcium (Ca) and phosphate (P) ion rechargeability. The objectives of this study were to develop a Ca and P ion-rechargeable and protein-repellent composite for the first time, and investigate the effects of MPC and NACP on mechanical properties, protein-repellency, anti-biofilm effects, and Ca and P ion recharge and re-release.

METHODS

NACP were synthesized using a spray-drying technique. The resin contained ethoxylated bisphenol A dimethacrylate (EBPADMA) and pyromellitic glycerol dimethacrylate (PMGDM). Three NACP composites were made with 0 (control), 1.5%, and 3% of MPC. NACP (20%) and glass particles (50%) were also added into the resin. Protein adsorption was measured using a micro-bicinchoninic acid (BCA) method. A human saliva microcosm biofilm model was used to determine biofilm metabolic activity, lactic acid, and colony-forming units (CFU). Ca and P ion recharge and re-release were measured using a spectrophotometric method.

RESULTS

Flexural strengths and moduli of CaP-rechargeable composites matched those of a commercial composite without CaP rechargeability (p>0.1). Adding 1.5% and 3% MPC reduced protein adsorption to 1/3 and 1/5, respectively, that of commercial composite (p<0.05). Adding 3% MPC suppressed biofilm metabolic activity and lactic acid production, and reduced biofilm CFU by nearly 2 logs. All three NACP composites had excellent ion rechargeability and higher levels of ion re-releases. One recharge yielded continuous ion release for 21 days. The release was maintained at the same level with increasing number of recharge cycles, indicating long-term ion release. Incorporation of MPC did not compromise the CaP ion rechargeability.

SIGNIFICANCE

Incorporating 3% MPC into NACP nanocomposite greatly reduced protein adsorption, biofilm growth and lactic acid, decreasing biofilm CFU by nearly 2 logs, without compromising Ca and P recharge. This protein-repellent NACP-MPC rechargeable composite with long-term remineralization is promising for tooth restorations to inhibit secondary caries.

Curcumin-mediated antimicrobial photodynamic therapy reduces the viability and vitality of infected dentin caries microcosms

BACKGROUND

To our knowledge, there is a lack of evidence on the effect of Antimicrobial Photodynamic Therapy (aPDT) by the application of curcumin against complex biofilms of dental caries lesions. This study aimed to evaluate the viability, vitality, and acid metabolism of infected dentin caries microcosms treated with curcumin-mediated aPDT.

METHODS

After microcosm biofilms growing anaerobically on bovine dentin disks immersed in McBain medium with 1% sucrose at 37 °C for 5 days, the biofilms were treated by the association of DMSO water solution or 600 μmol L^-1 curcumin with 0, 37.5 or 75 J cm^-2 blue LED (455 nm). Then, the colony-forming units (CFU) counts of total microorganisms, total streptococci, mutans streptococci, and total lactobacilli were determined by plating. The lactic acid concentration was analyzed by enzymatic spectrophotometry method, while the vitality of intact biofilms was evaluated by confocal laser scanning microscope (CLSM). Statistical analysis was performed by Kruskal Wallis and post-hoc Dunn's tests (P < 0.05).

RESULTS

Curcumin alone did not affect the viability of microorganisms and the vitality of intact biofilms. However, 75 J cm^-2 LED alone decreased the total microorganisms and total lactobacilli counts. The combination of curcumin and LED reduced significantly the counts of all microorganism groups and the vitality of intact biofilms. Differences were not observed between the lactic acid concentrations of distinct groups.

CONCLUSIONS

Therefore, curcumin-mediated aPDT was effective in reducing the viability and the vitality of infected dentin caries microcosms, without interfering in their acidogenicity.

Protein-repelling adhesive resin containing calcium phosphate nanoparticles with repeated ion-recharge and re-releases

OBJECTIVES

The objectives were to develop a calcium (Ca) and phosphate (P) ion-rechargeable and protein-repellent adhesive containing nanoparticles of amorphous calcium phosphate (NACP) and 2-methacryloyloxyethyl phosphorylcholine (MPC), and investigate the MPC effects on ion recharge and re-releases for the first time.

METHODS

Pyromellitic glycerol dimethacrylate and ethoxylated bisphenol-A dimethacrylate were used to fabricate adhesive PEHB. Six adhesives were tested: (1) Scotchbond (SBMP); (2) PEHB, (3) PEHB + 20%NACP; (4) PEHB + 30%NACP; (5) PEHB + 20%NACP+3%MPC; (6) PEHB + 30%NACP+3%MPC. Dentin shear bond strength, Ca/P ion release, recharge and re-release, and protein adsorption were measured. A microcosm biofilm model was tested for lactic-acid production and colony-forming units (CFU).

RESULTS

Adding NACP + MPC did not negatively affect dentin bond strength (p > 0.1). With increasing the number of recharge/re-release cycles, the Ca/P ion re-release reached similarly higher levels (p > 0.1), indicating long-term remineralization capability. One recharge enabled the adhesives to have continued re-releases for 21 days. Incorporation of 3% MPC yielded 10-fold decrease in protein adsorption, and 1-2 log decrease in biofilm CFU.

CONCLUSIONS

The new rechargeable adhesive with MPC + 30%NACP greatly reduced protein adsorption, biofilm growth and lactic acid. Incorporation of MPC did not compromise the excellent Ca/P ion release, rechargeability, and dentin bond strength.

CLINICAL SIGNIFICANCE

Novel bioactive adhesive containing MPC + NACP is promising to repel proteins and bacteria, and inhibit secondary caries at the restoration margins. The method of NACP + MPC to combine CaP-recharge and protein-repellency is applicable to the development of a new generation of materials including composites and cements to suppress oral biofilms and plaque formation and protect tooth structures.