Medium-chain-length polyhydroxyalkanoate production by newly isolated Pseudomonas sp. TN301 from a wide range of polyaromatic and monoaromatic hydrocarbons

Exploring polyhydroxyalkanoates biosynthesis using hydrocarbons as carbon source: a comprehensive review

Environmental pollution caused by petrochemical hydrocarbons (HC) and plastic waste is a pressing global challenge. However, there is a promising solution in the form of bacteria that possess the ability to degrade HC, making them valuable tools for remediating contaminated environments and effluents. Moreover, some of these bacteria offer far-reaching potential beyond bioremediation, as they can also be utilized to produce polyhydroxyalkanoates (PHAs), a common type of bioplastics. The accumulation of PHAs in bacterial cells is facilitated in environments with high C/N or C/P ratio, which are often found in HC-contaminated environments and effluents. Consequently, some HC-degrading bacteria can be employed to simultaneously produce PHAs and conduct biodegradation processes. Although bacterial bioplastic production has been thoroughly studied, production costs are still too high compared to petroleum-derived plastics. This article aims to provide a comprehensive review of recent scientific advancements concerning the capacity of HC-degrading bacteria to produce PHAs. It will delve into the microbial strains involved and the types of bioplastics generated, as well as the primary pathways for HC biodegradation and PHAs production. In essence, we propose the potential utilization of HC-degrading bacteria as a versatile tool to tackle two major environmental challenges: HC pollution and the accumulation of plastic waste. Through a comprehensive analysis of strengths and weaknesses in this aspect, this review aims to pave the way for future research in this area, with the goal of facilitating and promoting investigation in a field where obtaining PHAs from HC remains a costly and challenging process.

Characterization of a New Pseudomonas Putida Strain Ch2, a Degrader of Toxic Anthropogenic Compounds Epsilon-Caprolactam and Glyphosate

In this work, a new Ch2 strain was isolated from soils polluted by agrochemical production wastes. This strain has a unique ability to utilize toxic synthetic compounds such as epsilon-caprolactam (CAP) as a sole carbon and energy source and the herbicide glyphosate (GP) as a sole source of phosphorus. Analysis of the nucleotide sequence of the 16S rRNA gene of Ch2 revealed that the strain belongs to the species Pseudomonas putida. This strain grew in the mineral medium containing CAP in a concentration range of 0.5 to 5.0 g/L and utilized 6-aminohexanoic acid and adipic acid, which are the intermediate products of CAP catabolism. The ability of strain Ch2 to degrade CAP is determined by a conjugative megaplasmid that is 550 kb in size. When strain Ch2 is cultured in a mineral medium containing GP (500 mg/L), more intensive utilization of the herbicide occurs in the phase of active growth. In the phase of declining growth, there is an accumulation of aminomethylphosphonic acid, which indicates that the C-N bond is the first site cleaved during GP degradation (glyphosate oxidoreductase pathway). Culture growth in the presence of GP during the early step of its degradation is accompanied by unique substrate-dependent changes in the cytoplasm, including the formation of vesicles of cytoplasmic membrane consisting of specific electron-dense content. There is a debate about whether these membrane formations are analogous to metabolosomes, where the primary degradation of the herbicide can take place. The studied strain is notable for its ability to produce polyhydroxyalkanoates (PHAs) when grown in mineral medium containing GP. At the beginning of the stationary growth phase, it was shown that, the amount and size of PHA inclusions in the cells drastically increased; they filled almost the entire volume of cell cytoplasm. The obtained results show that the strain P. putida Ch2 can be successfully used for the PHAs’ production. Moreover, the ability of P. putida Ch2 to degrade CAP and GP determines the prospects of its application for the biological cleanup of CAP production wastes and in situ bioremediation of soil polluted with GP.

Biogeochemical properties of blue carbon sediments influence the distribution and monomer composition of bacterial polyhydroxyalkanoates (PHA)

Coastal wetlands are highly efficient 'blue carbon' sinks which contribute to mitigating climate change through the long-term removal of atmospheric CO₂ and capture of carbon (C). Microorganisms are integral to C sequestration in blue carbon sediments and face a myriad of natural and anthropogenic pressures yet their adaptive responses are poorly understood. One such response in bacteria is the alteration of biomass lipids, specifically through the accumulation of polyhydroxyalkanoates (PHAs) and alteration of membrane phospholipid fatty acids (PLFA). PHAs are highly reduced bacterial storage polymers that increase bacterial fitness in changing environments. In this study, we investigated the distribution of microbial PHA, PLFA profiles, community structure and response to changes in sediment geochemistry along an elevation gradient from intertidal to vegetated supratidal sediments. We found highest PHA accumulation, monomer diversity and expression of lipid stress indices in elevated and vegetated sediments where C, nitrogen (N), PAH and heavy metals increased, and pH was significantly lower. This was accompanied by a reduction in bacterial diversity and a shift to higher abundances of microbial community members favouring complex C degradation. Results presented here describe a connection between bacterial PHA accumulation, membrane lipid adaptation, microbial community composition and polluted C rich sediments.

GRAPHICAL ABSTRACT

Geochemical, microbiological and polyhydroxyalkanoate (PHA) gradient in a blue carbon zone.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s10533-022-01008-5.

Enhanced biodegradation and valorization of drilling wastewater via simultaneous production of biosurfactants and polyhydroxyalkanoates by Pseudomonas citronellolis SJTE-3

Pseudomonas citronellolis SJTE-3 was isolated as a highly efficient microorganism for biodegradation and valorization of drilling fluids (DF) wastewater. The strain metabolised DF and oily mud exhibiting up to 93%, 86%, 85% and 88% of chemical oxygen demand (COD), n-dodecane, n-tetradecane and naphthalene removal efficiency respectively. Enhanced bioconversion was enabled through production of biosurfactants that reduced the surface tension of water by 53% and resulted in 43.3% emulsification index (E24), while synthesizing 24% of dry cell weight (DCW) as medium-chain-length polyhydroxyalkanoates (PHA). Expression from the main pathways for alkanes and naphthalene biodegradation as well as biosurfactants and PHA biosynthesis revealed that although the alkanes and naphthalene biodegradation routes were actively expressed even at stationary phase, PHA production was stimulated at late stationary phase and putisolvin could comprise the biosurfactant synthesized. The bioconversion of toxic petrochemical residues to added-value thermoelastomers and biosurfactants indicate the high industrial significance of P. citronellolis SJTE-3.

Tailor-Made Polyhydroxyalkanoates by Reconstructing Pseudomonas Entomophila

Microbial polyhydroxyalkanoates (PHA) containing short- and medium/long-chain-length monomers, abbreviated as SCL-co-MCL/LCL PHAs, generate suitable thermal and mechanical properties. However, SCL-co-MCL/LCL PHAs with carbon chain longer than nine are difficult to synthesize due to the low specificity of PHA synthase PhaC and the lack of either SCL- or MCL/LCL monomer precursor fluxes. This study succeeds in reprogramming a β-oxidation weakened Pseudomonas entomophila containing synthesis pathways of SCL 3-hydroxybutyryl-CoA (3HB) from glucose and MCL/LCL 3-hydroxyalkanoyl-CoA from fatty acids with carbon chain lengths from 9 to 18, respectively, that are polymerized under a low specificity PhaC_61-3 to form P(3HB-co-MCL/LCL 3HA) copolymers. Through rational flux-tuning approaches, the optimized recombinant P. entomophila accumulates 55 wt% poly-3-hydroxybutyrate in 8.4 g L^-1 cell dry weight. Combined with weakened β-oxidation, a series of novel P(3HB-co-MCL/LCL 3HA) copolymers with over 60 wt% PHA in 9 g L^-1 cell dry weight have been synthesized for the first time. P. entomophila has become a high-performing platform to generate tailor-made new SCL-co-MCL/LCL PHAs.

Microbial cell factories for the production of polyhydroxyalkanoates

Pollution caused by persistent petro-plastics is the most pressing problem currently, with 8 million tons of plastic waste dumped annually in the oceans. Plastic waste management is not systematized in many countries, because it is laborious and expensive with secondary pollution hazards. Bioplastics, synthesized by microorganisms, are viable alternatives to petrochemical-based thermoplastics due to their biodegradable nature. Polyhydroxyalkanoates (PHAs) are a structurally and functionally diverse group of storage polymers synthesized by many microorganisms, including bacteria and Archaea. Some of the most important PHA accumulating bacteria include Cupriavidus necator, Burkholderia sacchari, Pseudomonas sp., Bacillus sp., recombinant Escherichia coli, and certain halophilic extremophiles. PHAs are synthesized by specialized PHA polymerases with assorted monomers derived from the cellular metabolite pool. In the natural cycle of cellular growth, PHAs are depolymerized by the native host for carbon and energy. The presence of these microbial PHA depolymerases in natural niches is responsible for the degradation of bioplastics. Polyhydroxybutyrate (PHB) is the most common PHA with desirable thermoplastic-like properties. PHAs have widespread applications in various industries including biomedicine, fine chemicals production, drug delivery, packaging, and agriculture. This review provides the updated knowledge on the metabolic pathways for PHAs synthesis in bacteria, and the major microbial hosts for PHAs production. Yeasts are presented as a potential candidate for industrial PHAs production, with their high amenability to genetic engineering and the availability of industrial-scale technology. The major bottlenecks in the commercialization of PHAs as an alternative for plastics and future perspectives are also critically discussed.

Enhancing the degradation of mixed polycyclic aromatic hydrocarbon and medium-chain-length polyhydroxyalkanoate production by mixed bacterial cultures using modified repeated batch fermentation

AIMS

To increase the biodegradation of phenanthrene (PHE), pyrene (PYR) and fluoranthene (FLU) through mixed cultures of polycyclic aromatic hydrocarbon (PAH)-degrading bacteria, using modified repeated batch fermentation.

METHODS AND RESULTS

Novel bacterial strains of Pseudomonas putida, Pseudomonas sp. and Ralstonia eutropha were cultivated and the biodegradation and conversion of mixed PAH to medium-chain-length polyhydroxyalkanoates (MCL-PHA) was determined. The highest degradation of PAH (100%) and PHA production (50·0%) was obtained in medium containing 30 mmol l^-1 of mixed PAH after three cycles of repeated batch fermentation. The concentration of PAH in the reactor was increased from 30 to 90 mmol l^-1 with repeated additions of PAH, and bacteria were able to produce PHA at 40% of cell dry mass. The MCL-PHA were identified by gas chromatography/mass spectroscopy, with the 3-hydroxydecanoate (3-HD) monomer higher than 75 mol.%.

CONCLUSIONS

This study demonstrated that the biodegradation of PHE, PYR and FLU was enhanced by modified repeated batch fermentation using a mixed culture of bacteria. In addition, this fermentation strategy also increased the production of PHA, with an increase in monomer composition.

SIGNIFICANCE AND IMPACT OF THE STUDY

This was the first study to describe the enhancement of the degradation of mixed solutions of PHE, PYR and FLU, and PHA production, using novel mixed bacterial cultures and modified repeated batch fermentation. The MCL-PHA formed had uniquely high 3-HD content.

The Degradation of Phenanthrene, Pyrene, and Fluoranthene and Its Conversion into Medium-Chain-Length Polyhydroxyalkanoate by Novel Polycyclic Aromatic Hydrocarbon-Degrading Bacteria

Screening of high-efficient polycyclic aromatic hydrocarbon (PAH)-degrading bacteria is important due to environmental contamination by PAHs. In this study, sediment contaminated with phenanthrene (Phe), pyrene (Pyr), and fluoranthene (Fluo) was used as a source of bacteria. The ability of these isolated bacteria to convert PAHs into valuable products was determined. Based on a primary screening, 20 bacterial isolates were obtained; however, only three strains showed a good PAH-degrading ability, and were identified as Pseudomonas aeruginosa, Pseudomonas sp., and Ralstonia sp. PAH-degrading genes were detected in all isolates. Notably, all selected strains could degrade PAHs using the ortho or meta cleavage pathways due to the presence of catechol dioxygenase genes. The ability of isolated strains to convert PAHs into polyhydroxyalkanoate (PHA) was also evaluated in both single and mixed cultures. Single cultures of P. aeruginosa PAH-P02 showed 100% degradation of PAHs, with the highest biomass (1.27 ± 0.02 g l^-1) and PHA content (38.20 ± 1.92% dry cell weight). However, degradative ability and PHA production were decreased when mixtures of PAHs were used. This study showed that P. aeruginosa, Pseudomonas sp., and Ralstonia sp. were able to degrade PAHs and convert them into medium-chain-length (mcl)-PHA. A high content of 3-hydroxydecanoate (3HD, C10) was observed in this study. The formation of mcl-PHA with high 3HD content from Pyr and Fluo, and the assessment of mixed cultures converting PAHs to mcl-PHA, were novel contributions.

Stimulation of anaerobic biofilm development in the presence of low concentrations of toxic aromatic pollutants

The main aim of this work was to stimulate biofilm formation in the presence of wastewater containing aromatic compounds with different toxicities (EC₅₀). The results indicated that wastewater with an EC₅₀ value >85% accelerates the attachment of bacteria onto the bio-carriers because the toxic wastewater stimulates the production of extracellular polymeric substances (EPS) from the seed sludge. In order to understand the role of EPS on biofilm development, experiments were conducted using the seed sludge, from which the soluble, loosely bound, and tightly bound EPS were removed. The soluble EPS fraction was determined to be crucial for biofilm development. Firmicutes bacterium and Clostridium chromoreductans survived and were enriched in the formed biofilms in our study, which can resist toxic aromatics.

Engineering a bzd cassette for the anaerobic bioconversion of aromatic compounds

Microorganisms able to degrade aromatic contaminants constitute potential valuable biocatalysts to deal with a significant reusable carbon fraction suitable for eco‐efficient valorization processes. Metabolic engineering of anaerobic pathways for degradation and recycling of aromatic compounds is an almost unexplored field. In this work, we present the construction of a functional bzd cassette encoding the benzoyl‐CoA central pathway for the anaerobic degradation of benzoate. The bzd cassette has been used to expand the ability of some denitrifying bacteria to use benzoate as sole carbon source under anaerobic conditions, and it paves the way for future pathway engineering of efficient anaerobic biodegraders of aromatic compounds whose degradation generates benzoyl‐CoA as central intermediate. Moreover, a recombinant Azoarcus sp. CIB strain harbouring the bzd cassette was shown to behave as a valuable biocatalyst for anaerobic toluene valorization towards the synthesis of poly‐3‐hydroxybutyrate (PHB), a biodegradable and biocompatible polyester of increasing biotechnological interest as a sustainable alternative to classical oil‐derived polymers.

Recent Advances and Challenges towards Sustainable Polyhydroxyalkanoate (PHA) Production

Sustainable biofuels, biomaterials, and fine chemicals production is a critical matter that research teams around the globe are focusing on nowadays. Polyhydroxyalkanoates represent one of the biomaterials of the future due to their physicochemical properties, biodegradability, and biocompatibility. Designing efficient and economic bioprocesses, combined with the respective social and environmental benefits, has brought together scientists from different backgrounds highlighting the multidisciplinary character of such a venture. In the current review, challenges and opportunities regarding polyhydroxyalkanoate production are presented and discussed, covering key steps of their overall production process by applying pure and mixed culture biotechnology, from raw bioprocess development to downstream processing.

Carbon-rich wastes as feedstocks for biodegradable polymer (polyhydroxyalkanoate) production using bacteria

Research into the production of biodegradable polymers has been driven by vision for the most part from changes in policy, in Europe and America. These policies have their origins in the Brundtland Report of 1987, which provides a platform for a more sustainable society. Biodegradable polymers are part of the emerging portfolio of renewable raw materials seeking to deliver environmental, social, and economic benefits. Polyhydroxyalkanoates (PHAs) are naturally-occurring biodegradable-polyesters accumulated by bacteria usually in response to inorganic nutrient limitation in the presence of excess carbon. Most of the early research into PHA accumulation and technology development for industrial-scale production was undertaken using virgin starting materials. For example, polyhydroxybutyrate and copolymers such as polyhydroxybutyrate-co-valerate are produced today at industrial scale from corn-derived glucose. However, in recent years, research has been undertaken to convert domestic and industrial wastes to PHA. These wastes in today's context are residuals seen by a growing body of stakeholders as platform resources for a biobased society. In the present review, we consider residuals from food, plastic, forest and lignocellulosic, and biodiesel manufacturing (glycerol). Thus, this review seeks to gain perspective of opportunities from literature reporting the production of PHA from carbon-rich residuals as feedstocks. A discussion on approaches and context for PHA production with reference to pure- and mixed-culture technologies is provided. Literature reports advocate results of the promise of waste conversion to PHA. However, the vast majority of studies on waste to PHA is at laboratory scale. The questions of surmounting the technical and political hurdles to industrialization are generally left unanswered. There are a limited number of studies that have progressed into fermentors and a dearth of pilot-scale demonstration. A number of fermentation studies show that biomass and PHA productivity can be increased, and sometimes dramatically, in a fermentor. The relevant application-specific properties of the polymers from the wastes studied and the effect of altered-waste composition on polymer properties are generally not well reported and would greatly benefit the progress of the research as high productivity is of limited value without the context of requisite case-specific polymer properties. The proposed use of a waste residual is advantageous from a life cycle viewpoint as it removes the direct or indirect effect of PHA production on land usage and food production. However, the question, of how economic drivers will promote or hinder advancements to demonstration scale, when wastes generally become understood as resources for a biobased society, hangs today in the balance due to a lack of shared vision and the legacy of mistakes made with first generation bioproducts.

Bioconversion of styrene to poly(hydroxyalkanoate) (PHA) by the new bacterial strain Pseudomonas putida NBUS12

Styrene is a toxic pollutant commonly found in waste effluents from plastic processing industries. We herein identified and characterized microorganisms for bioconversion of the organic eco-pollutant styrene into a valuable biopolymer medium-chain-length poly(hydroxyalkanoate) (mcl-PHA). Twelve newly-isolated styrene-degrading Pseudomonads were obtained and partial phaC genes were detected by PCR in these isolates. These isolates assimilated styrene to produce mcl-PHA, forming PHA contents between 0.05±0.00 and 23.10±3.25% cell dry mass (% CDM). The best-performing isolate was identified as Pseudomonas putida NBUS12. A genetic analysis of 16S rDNA and phaZ genes revealed P. putida NBUS12 as a genetically-distinct strain from existing phenotypically-similar bacterial strains. This bacterium achieved a final biomass of 1.28±0.10 g L⁻¹ and PHA content of 32.49±2.40% CDM. The extracted polymer was mainly comprised of 3-hydroxyhexanoate (C₆ ), 3-hydroxyoctanoate (C₈ ), 3-hydroxydecanoate (C₁₀ ), 3-hydroxydodecanoate (C₁₂ ), and 3-hydroxytetradecanoate (C₁₄ ) monomers at a ratio of 2:42:1257:17:1. These results collectively suggested that P. putida NBUS12 is a promising candidate for the biotechnological conversion of styrene into mcl-PHA.

Microbial diversity, community composition and metabolic potential in hydrocarbon contaminated oily sludge: prospects for in situ bioremediation

Microbial community composition and metabolic potential have been explored in petroleum-hydrocarbon-contaminated sludge of an oil storage facility. Culture-independent clone library-based 16S rRNA gene analyses revealed that the bacterial community within the sludge was dominated by the members of β-Proteobacteria (35%), followed by Firmicutes (13%), δ-Proteobacteria (11%), Bacteroidetes (10%), Acidobacteria (6%), α-Proteobacteria (3%), Lentisphaerae (2%), Spirochaetes (2%), and unclassified bacteria (5%), whereas the archaeal community was composed of Thermoprotei (54%), Methanocellales (33%), Methanosarcinales/Methanosaeta (8%) and Methanoculleus (1%) members. Methyl coenzyme M reductase A (mcrA) gene (a functional biomarker) analyses also revealed predominance of hydrogenotrophic, methanogenic Archaea (Methanocellales, Methanobacteriales and Methanoculleus members) over acetoclastic methanogens (Methanosarcinales members). In order to explore the cultivable bacterial population, a total of 28 resident strains were identified and characterized in terms of their physiological and metabolic capabilities. Most of these could be taxonomically affiliated to the members of the genera Bacillus, Paenibacillus, Micrococcus, Brachybacterium, Aerococcus, and Zimmermannella, while two strains were identified as Pseudomonas and Pseudoxanthomonas. Metabolic profiling exhibited that majority of these isolates were capable of growing in presence of a variety of petroleum hydrocarbons as sole source of carbon, tolerating different heavy metals at higher concentrations (≥1 mM) and producing biosurfactant during growth. Many strains could grow under a wide range of pH, temperature, or salinity as well as under anaerobic conditions in the presence of different electron acceptors and donors in the growth medium. Correlation between the isolates and their metabolic properties was estimated by the unweighted pair group method with arithmetic mean (UPGMA) analysis. Overall observation indicated the presence of diverse groups of microorganisms including hydrocarbonoclastic, nitrate reducing, sulphate reducing, fermentative, syntrophic, methanogenic and methane-oxidizing bacteria and Archaea within the sludge community, which can be exploited for in situ bioremediation of the oily sludge.