Contact guidance in human dermal fibroblasts is modulated by population pressure

Nanocomposite Based on Bacterial Cellulose and Silver Nanoparticles Improve Wound Healing Without Exhibiting Toxic Effect

Wound healing is an important and complex process, containing a multifaceted process governed by sequential yet overlapping phases. Certain treatments can optimize local physiological conditions and improve wound healing. Silver nanoparticles (AgNP) are widely known for their antimicrobial activity. On the other hand, bacterial cellulose (BC) films have been used as a dressing that temporarily substitutes the skin, offering many advantages in optimizing wound healing, in addition to being highly biocompatible. Considering the promising activities of AgNP and BC films, the present study aimed to evaluate the wound healing activity in Wistar Hannover rats using a nanocomposite based on bacterial cellulose containing AgNP (AgBC). In a period of 21 days, its influence on the wound area, microbial growth, histopathological parameters, and collagen content were analyzed. In addition, toxicity indicators were assessed, such as weight gain, water consumption, and creatinine and alanine transaminase levels. After 14 days of injury, the animals treated with AgBC showed a significant increase in wound contraction. The treatment with AgBC significantly reduced the number of microbial colonies compared to other treatments in the first 48 h after the injury. At the end of the 21 experimental days, an average wound contraction rate greater than 97 % in relation to the initial area was observed, in addition to a significant increase in the amount of collagen fibers at the edge of the wounds, lower scores of necrosis, angiogenesis and inflammation, associated with no systemic toxicity. Therefore, it is concluded that the combination of preexisting products to form a new nanocomposite based on BC and AgNP amplified the biological activity of these products, increasing the effectiveness of wound healing and minimizing possible toxic effects of silver.

Recent advances in nanomedicines for regulation of macrophages in wound healing

Macrophages are essential immune cells and play a major role in the immune response as pro-inflammatory or anti-inflammatory agents depending on their plasticity and functions. Infiltration and activation of macrophages are usually involved in wound healing. Herein, we first described macrophage polarization and their critical functions in wound healing process. It is addressed how macrophages collaborate with other immune cells in the wound microenvironment. Targeting macrophages by manipulating or re-educating macrophages in inflammation using nanomedicines is a novel and feasible strategy for wound management. We discussed the design and physicochemical properties of nanomaterials and their functions for macrophages activation and anti-inflammatory signaling during wound therapy. The mechanism of action of the strategies and appropriate examples are also summarized to highlight the pros and cons of those approaches. Finally, the potential of nanomedicines to modulate macrophage polarization for skin regeneration is discussed.

The mechanics and dynamics of cancer cells sensing noisy 3D contact guidance

Contact guidance is a major physical cue that modulates cancer cell morphology and motility, and is directly linked to the prognosis of cancer patients. Under physiological conditions, particularly in the three-dimensional (3D) extracellular matrix (ECM), the disordered assembly of fibers presents a complex directional bias to the cells. It is unclear how cancer cells respond to these noncoherent contact guidance cues. Here we combine quantitative experiments, theoretical analysis, and computational modeling to study the morphological and migrational responses of breast cancer cells to 3D collagen ECM with varying degrees of fiber alignment. We quantify the strength of contact guidance using directional coherence of ECM fibers, and find that stronger contact guidance causes cells to polarize more strongly along the principal direction of the fibers. Interestingly, sensitivity to contact guidance is positively correlated with cell aspect ratio, with elongated cells responding more strongly to ECM alignment than rounded cells. Both experiments and simulations show that cell-ECM adhesions and actomyosin contractility modulate cell responses to contact guidance by inducing a population shift between rounded and elongated cells. We also find that cells rapidly change their morphology when navigating the ECM, and that ECM fiber coherence modulates cell transition rates between different morphological phenotypes. Taken together, we find that subcellular processes that integrate conflicting mechanical cues determine cell morphology, which predicts the polarization and migration dynamics of cancer cells in 3D ECM.

Wound Healing Activity of a Novel Formulation SKRIN via Induction of Cell Cycle Progression and Inhibition of PCNA-p21 Complex Interaction Leading to Cell Survival and Proliferation

The process of wound healing is a dynamic event that starts with inflammation, proliferation, and cell migration of various types of fibroblast cells. Therefore, identification of potential molecules which may increase the wound healing capacity of fibroblast cells is crucial. A novel hydroalcoholic formulation of belladonna (SKRIN), was developed and characterized by GC-MS/MS, DLS, TEM, and AFM and was found to contain atropine and scopolamine exhibit in aggregated nanosized particles. SKRIN-mediated fibroblast cell survival was elucidated in the presence of H₂O₂ by MTT and flow cytometry based assays. With an EC₅₀ of 4.41 μg/mL, SKRIN treatment showed significant increase in cell survival that was evident from a 1.11-fold increase (p < 0.0122) in the live cell population and 4.21-fold (p < 0.0001) and 2.59-fold (p < 0.0001) reductions in the early and late apoptotic cell populations, respectively. SKRIN-mediated wound healing was measured by cell scratch assay and cell cycle analysis. During the wound closure phenomenon, SKRIN increases repairing fibroblast cell proliferation by 1.24-fold (p = 0.0481) and increases the count of G2/M phase cells by 1.76-fold (p = 0.0002) which was confirmed by increased PCNA and reduced p21 protein expressions probably mediated by molecular interactions of PCNA-p21 complex with alkaloids present in SKRIN. Relative gene expression analysis further showed that SKRIN increases the PI3K, Akt, and NF-κB expression. Our data suggests that SKRIN exhibits wound healing property by increasing cell survival and repairing fibroblast proliferation via activation of the PI3K-Akt-NF-κB pathway probably mediated by inhibition of PCNA-p21 complex interaction.

Gene Expression Regulation and Secretory Activity of Mesenchymal Stem Cells upon In Vitro Contact with Microarc Calcium Phosphate Coating

The manufacture of biomaterial surfaces with desired physical and chemical properties that can directly induce osteogenic differentiation without the need for biochemical additives is an excellent strategy for controlling the behavior of mesenchymal stem cells (MSCs) in vivo. We studied the cellular and molecular reactions of MSCs to samples with a double-sided calcium phosphate (CaP) coating and an average roughness index (Ra) of 2.4-4.6 µm. The study aimed to evaluate the effect of a three-dimensional matrix on the relative mRNA expression levels of genes associated with the differentiation and maturation of MSCs toward osteogenesis (RUNX2, BMP2, BMP6, BGLAP, and ALPL) under conditions of distant interaction in vitro. Correlations were revealed between the mRNA expression of some osteogenic and cytokine/chemokine genes and the secretion of cytokines and chemokines that may potentiate the differentiation of cells into osteoblasts, which indicates the formation of humoral components of the extracellular matrix and the creation of conditions supporting the establishment of hematopoietic niches.

The relationship between substrate topography and stem cell differentiation in the musculoskeletal system

It is well known that biomaterial topography can exert a profound influence on various cellular functions such as migration, polarization, and adhesion. With the development and refinement of manufacturing technology, much research has recently been focused on substrate topography-induced cell differentiation, particularly in the field of tissue engineering. Even without biological and chemical stimuli, the differentiation of stem cells can also be initiated by various biomaterials with different topographic features. However, the underlying mechanisms of this biological phenomenon remain elusive. During the past few decades, many researchers have demonstrated that cells can sense the topography of materials through the assembly and polymerization of membrane proteins. Following the activation of RHO, TGF-b or FAK signaling pathways, cells can be induced into various differentiation states. But these signaling pathways often coincide with canonical mechanical transduction pathways, and no firm conclusion has been reached among researchers in this field on topography-specific signaling pathways. On the other hand, some substrate topographies are reported to have the ability to inhibit differentiation and maintain the 'stemness' of stem cells. In this review, we will summarize the role of topography in musculoskeletal system regeneration and explore possible topography-related signaling pathways involved in cell differentiation.

Investigation of wound healing process guided by nano-scale topographic patterns integrated within a microfluidic system

When living tissues are injured, they undergo a sequential process of homeostasis, inflammation, proliferation and maturation, which is called wound healing. The working mechanism of wound healing has not been wholly understood due to its complex environments with various mechanical and chemical factors. In this study, we propose a novel in vitro wound healing model using a microfluidic system that can manipulate the topography of the wound bed. The topography of the extracellular matrix (ECM) in the wound bed is one of the most important mechanical properties for rapid and effective wound healing. We focused our work on the topographical factor which is one of crucial mechanical cues in wound healing process by using various nano-patterns on the cell attachment surface. First, we analyzed the cell morphology and dynamic cellular behaviors of NIH-3T3 fibroblasts on the nano-patterned surface. Their morphology and dynamic behaviors were investigated for relevance with regard to the recovery function. Second, we developed a highly reproducible and inexpensive research platform for wound formation and the wound healing process by combining the nano-patterned surface and a microfluidic channel. The effect of topography on wound recovery performance was analyzed. This in vitro wound healing research platform will provide well-controlled topographic cue of wound bed and contribute to the study on the fundamental mechanism of wound healing.

Initial contact guidance during cell spreading is contractility-independent

A wide variety of cell types exhibit substrate topography-based behavior, also known as contact guidance. However, the precise cellular mechanisms underlying this process are still unknown. In this study, we investigated contact guidance by studying the reaction of human endothelial cells (ECs) to well-defined microgroove topographies, both during and after initial cell spreading. As the cytoskeleton plays a major role in cellular adaptation to topographical features, two methods were used to perturb cytoskeletal structures. Inhibition of actomyosin contractility with the chemical inhibitor blebbistatatin demonstrated that initial contact guidance events are independent of traction force generation. However, cell alignment to the grooved substrate was altered at later time points, suggesting an initial 'passive' phase of contact guidance, followed by a contractility-dependent 'active' phase that relies on mechanosensitive feedback. The actin cytoskeleton was also perturbed in an indirect manner by culturing cells upside down, resulting in decreased levels of contact guidance and suggesting that a possible loss of contact between the actin cytoskeleton and the substrate could lead to cytoskeleton impairment. The process of contact guidance at the microscale was found to be primarily lamellipodia driven, as no bias in filopodia extension was observed on micron-scale grooves.

The modulation of stem cell behaviors by functionalized nanoceramic coatings on Ti-based implants

Nanoceramic coating on the surface of Ti-based metallic implants is a clinical potential option in orthopedic surgery. Stem cells have been found to have osteogenic capabilities. It is necessary to study the influences of functionalized nanoceramic coatings on the differentiation and proliferation of stem cells in vitro or in vivo. In this paper, we summarized the recent advance on the modulation of stem cells behaviors through controlling the properties of nanoceramic coatings, including surface chemistry, surface roughness and microporosity. In addition, mechanotransduction pathways have also been discussed to reveal the interaction mechanisms between the stem cells and ceramic coatings on Ti-based metals. In the final part, the osteoinduction and osteoconduction of ceramic coating have been also presented when it was used as carrier of BMPs in new bone formation.

•

The effects of basic physical properties like roughness, topography and porous stucture of ceramic coatings on the stem cells behaviors on Ti-based alloys have been reviewed together.

•

The chemical way to modulate the cell behaviors is also discussed in this review paper; and the related mechanotransduction pathways have been described in this paper.

Surface topography of hydroxyapatite promotes osteogenic differentiation of human bone marrow mesenchymal stem cells

Effective and safe induction of osteogenic differentiation is one of the key elements of bone tissue engineering. Surface topography of scaffold materials was recently found to promote osteogenic differentiation. Utilization of this topography may be a safer approach than traditional induction by growth factors or chemicals. The aim of this study is to investigate the enhancement of osteogenic differentiation by surface topography and its mechanism of action. Hydroxyapatite (HA) discs with average roughness (Ra) of surface topography ranging from 0.2 to 1.65 μm and mean distance between peaks (RSm) ranging from 89.7 to 18.6 μm were prepared, and human bone-marrow mesenchymal stem cells (hBMSCs) were cultured on these discs. Optimal osteogenic differentiation was observed on discs with surface topography characterized by Ra ranging from 0.77 to 1.09 μm and RSm ranging from 53.9 to 39.3 μm. On this surface configuration of HA, hBMSCs showed oriented attachment, F-actin arrangement, and a peak in the expression of Yes-associated protein (YAP) and PDZ binding motif (TAZ) (YAP/TAZ). These results indicated that the surface topography of HA promoted osteogenic differentiation of hBMSCs, possibly by increasing cell attachment and promoting the YAP/TAZ signaling pathway.

Cell Alignment Driven by Mechanically Induced Collagen Fiber Alignment in Collagen/Alginate Coatings

For many years it has been a major challenge to regenerate damaged tissues using synthetic or natural materials. To favor the healing processes after tendon, cornea, muscle, or brain injuries, aligned collagen-based architectures are of utmost interest. In this study, we define a novel aligned coating based on a collagen/alginate (COL/ALG) multilayer film. The coating exhibiting a nanofibrillar structure is cross-linked with genipin for stability in physiological conditions. By stretching COL/ALG-coated polydimethylsiloxane substrates, we developed a versatile method to align the collagen fibrils of the polymeric coating. Assays on cell morphology and alignment were performed to investigate the properties of these films. Microscopic assessments revealed that cells align with the stretched collagen fibrils of the coating. The degree of alignment is tuned by the stretching rate (i.e., the strain) of the COL/ALG-coated elastic substrate. Such coatings are of great interest for strategies that require aligned nanofibrillar biological material as a substrate for tissue engineering.

Myoblast alignment on 2D wavy patterns: dependence on feature characteristics and cell-cell interaction

In this study, we investigate the effects of micron-scale surface patterns on the alignment of individual cells and groups of cells. Using a simple replication molding process we produce a number of micron-scale periodic wavy patterns with different pitch and depth. We observe C2C12 cells as they grow to confluence on these patterns and find that, for some geometries, cell-cell interaction leads to global alignment in a confluent culture when individual cells would not align on the same pattern. Three types of alignment behavior are thus defined: no alignment, immediate alignment, and alignment upon confluence. To further characterize this response, we introduce a non-dimensional parameter that describes the aligning power of a periodic pattern based on its geometry. The three types of alignment behavior can be distinguished by the value of the alignment parameter, and we identify values at which the transitions in alignment behavior occur. Applying this parameter to data from the current and several earlier studies reveals that the parameter successfully describes substrate aligning power over a wide range of length scales for both wavy and grooved features.

Cell-material interactions revealed via material techniques of surface patterning

Cell-material interactions constitute a key fundamental topic in biomaterials study. Various cell cues and matrix cues as well as soluble factors regulate cell behaviors on materials. These factors are coupled with each other as usual, and thus it is very difficult to unambiguously elucidate the role of each regulator. The recently developed material techniques of surface patterning afford unique ways to reveal the underlying science. This paper reviews the pertinent material techniques to fabricate patterns of microscale and nanoscale resolutions, and corresponding cell studies. Some issues are emphasized, such as cell localization on patterned surfaces of chemical contrast, and effects of cell shape, cell size, cell-cell contact, and seeding density on differentiation of stem cells. Material cues to regulate cell adhesion, cell differentiation and other cell events are further summed up. Effects of some physical properties, such as surface topography and matrix stiffness, on cell behaviors are also discussed; nanoscaled features of substrate surfaces to regulate cell fate are summarized as well. The pertinent work sheds new insight into the cell-material interactions, and is stimulating for biomaterial design in regenerative medicine, tissue engineering, and high-throughput detection, diagnosis, and drug screening.

Cell self-patterning on uniform PDMS-surfaces with controlled mechanical cues

The exploitation of cell-instructive scaffolds with uniform physical/chemical surfaces and controlled stiffness will be greatly useful in tissue engineering applications to resemble the extracellular matrix (ECM) or topographical appearance of native tissues. We herein describe a versatile and straightforward method to assemble a polydimethylsiloxane (PDMS)-composite structure in which a uniformly laminin-coated membrane is placed on top of a micropatterned substrate that applies a stiffness gradient. This 'double-sheet' structure provides soft or stiff microdomains that guide the self-patterning of different cell types [e.g. chronic myeloid leukemia (KU812), cervix carcinoma (HeLa), NIH 3T3 and BJ], thereby stimulating their cytoskeletal remodeling. More interestingly, we used these uniform PDMS surfaces with patterned rigidity for obtaining co-cultures of tumor blood cells (KU812) and adherent fibroblasts (NIH 3T3) with spatially-controlled distribution. Thus, beyond single-cell stiffening and mechanosensing, these surfaces should also be used as simple and feasible co-culture systems for mimicking and dissecting the bidirectional interactions between blood cells and specific stromal elements of their in vivo microenvironment.

Response of human corneal fibroblasts on silk film surface patterns

Transparent, biodegradable, mechanically robust, and surface-patterned silk films were evaluated for the effect of surface morphology on human corneal fibroblast (hCF) cell proliferation, orientation, and ECM deposition and alignment. A series of dimensionally different surface groove patterns were prepared from optically graded glass substrates followed by casting poly(dimethylsiloxane) (PDMS) replica molds. The features on the patterned silk films showed an array of asymmetric triangles and displayed 37-342 nm depths and 445-3 582 nm widths. hCF DNA content on all patterned films were not significantly different from that on flat silk films after 4 d in culture. However, the depth and width of the grooves influenced cell alignment, while the depth differences affected cell orientation; overall, deeper and narrower grooves induced more hCF orientation. Over 14 d in culture, cell layers and actin filament organization demonstrated that confluent hCFs and their cytoskeletal filaments were oriented along the direction of the silk film patterned groove axis. Collagen type V and proteoglycans (decorin and biglycan), important markers of corneal stromal tissue, were highly expressed with alignment. Understanding corneal stromal fibroblast responses to surface features on a protein-based biomaterial applicable in vivo for corneal repair potential suggests options to improve corneal tissue mimics. Further, the approaches provide fundamental biomaterial designs useful for bioengineering oriented tissue layers, an endemic feature in most biological tissue structures that lead to critical tissue functions.

Engineering substrate topography at the micro- and nanoscale to control cell function

The interaction of mammalian cells with nanoscale topography has proven to be an important signaling modality in controlling cell function. Naturally occurring nanotopographic structures within the extracellular matrix present surrounding cells with mechanotransductive cues that influence local migration, cell polarization, and other functions. Synthetically nanofabricated topography can also influence cell morphology, alignment, adhesion, migration, proliferation, and cytoskeleton organization. We review the use of in vitro synthetic cell-nanotopography interactions to control cell behavior and influence complex cellular processes, including stem-cell differentiation and tissue organization. Future challenges and opportunities in cell-nanotopography engineering are also discussed, including the elucidation of mechanisms and applications in tissue engineering.

Adhesion formation of primary human osteoblasts and the functional response of mesenchymal stem cells to 330nm deep microgrooves

The surface microtexture of an orthopaedic device can regulate cellular adhesion, a process fundamental in the initiation of osteoinduction and osteogenesis. Advances in fabrication techniques have evolved to include the field of surface modification; in particular, nanotechnology has allowed for the development of experimental nanoscale substrates for investigation into cell nanofeature interactions. Here primary human osteoblasts (HOBs) were cultured on ordered nanoscale groove/ridge arrays fabricated by photolithography. Grooves were 330nm deep and either 10, 25 or 100microm in width. Adhesion subtypes in HOBs were quantified by immunofluorescent microscopy and cell-substrate interactions were investigated via immunocytochemistry with scanning electron microscopy. To further investigate the effects of these substrates on cellular function, 1.7K gene microarray analysis was used to establish gene regulation profiles of mesenchymal stem cells cultured on these nanotopographies. Nanotopographies significantly affected the formation of focal complexes (FXs), focal adhesions (FAs) and supermature adhesions (SMAs). Planar control substrates induced widespread adhesion formation; 100microm wide groove/ridge arrays did not significantly affect adhesion formation yet induced upregulation of genes involved in skeletal development and increased osteospecific function; 25microm wide groove/ridge arrays were associated with a reduction in SMA and an increase in FX formation; and 10microm wide groove/ridge arrays significantly reduced osteoblast adhesion and induced an interplay of up- and downregulation of gene expression. This study indicates that groove/ridge topographies are important modulators of both cellular adhesion and osteospecific function and, critically, that groove/ridge width is important in determining cellular response.

Imaging of the cell surface interface using objective coupled widefield surface plasmon microscopy

We report on the development and on the first use of the widefield surface plasmon (WSPR) microscope in the examination of the cell surface interface at submicron lateral resolutions. The microscope is Kohler illuminated and uses either a 1.45 numerical aperture (NA) oil immersion lens, or a 1.65 NA oil immersion lens to excite surface plasmons at the interface between a thin gold layer and a glass or sapphire cover slip. Like all surface plasmon microscope systems the WSPR has been proven in previous studies to also be capable of nanometric z-scale resolutions. In this study we used the system to image the interface between HaCaT cells and the gold layer. Imaging was performed in air using fixed samples and the 1.45 NA objective based system and also using live cells in culture media using the 1.65 NA based system. Imaging in air enabled the visualisation of high resolution and high-contrast submicron features identified by vinculin immunostaining as component of focal contacts and focal adhesions. In comparison, imaging in fluid enabled cell surface interfacial interactions to be tracked by time-lapse video WSPR microscopy. Our results indicate that the cell surface interface and thus cell signalling mechanisms may be readily interrogated in live cells without the use of labelling techniques.