Porosity of human mandibular condylar bone

Synergy between 3D-extruded electroconductive scaffolds and electrical stimulation to improve bone tissue engineering strategies

In this work, we propose a simple, reliable, and versatile strategy to create 3D electroconductive scaffolds suitable for bone tissue engineering (TE) applications with electrical stimulation (ES). The proposed scaffolds are made of 3D-extruded poly(ε-caprolactone) (PCL), subjected to alkaline treatment, and of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), anchored to PCL with one of two different crosslinkers: (3-glycidyloxypropyl)trimethoxysilane (GOPS) and divinyl sulfone (DVS). Both cross-linkers allowed the formation of a homogenous and continuous coating of PEDOT:PSS to PCL. We show that these PEDOT:PSS coatings are electroconductive (11.3-20.1 S cm-1), stable (up to 21 days in saline solution), and allow the immobilization of gelatin (Gel) to further improve bioactivity. In vitro mineralization of the corresponding 3D conductive scaffolds was greatly enhanced (GOPS(NaOH)-Gel - 3.1 fold, DVS(NaOH)-Gel - 2.0 fold) and cell colonization and proliferation were the highest for the DVS(NaOH)-Gel scaffold. In silico modelling of ES application in DVS(NaOH)-Gel scaffolds indicates that the electrical field distribution is homogeneous, which reduces the probability of formation of faradaic products. Osteogenic differentiation of human bone marrow derived mesenchymal stem/stromal cells (hBM-MSCs) was performed under ES. Importantly, our results clearly demonstrated a synergistic effect of scaffold electroconductivity and ES on the enhancement of MSC osteogenic differentiation, particularly on cell-secreted calcium deposition and the upregulation of osteogenic gene markers such as COL I, OC and CACNA1C. These scaffolds hold promise for future clinical applications, including manufacturing of personalized bone TE grafts for transplantation with enhanced maturation/functionality or bioelectronic devices.

Effect of using nano-particles of magnesium oxide and titanium dioxide to enhance physical and mechanical properties of hip joint bone cement

In this work, the effect of adding Magnesium Oxide (MgO) and Titanium Dioxide (TiO2) nanoparticles to enhance the properties of the bone cement used for hip prosthesis fixation. Related to previous work on enhanced bone cement properties utilizing MgO and TiO2, samples of composite bone cement were made using three different ratios (0.5%:1%, 1.5%:1.5%, and 1%:0.5%) w/w of MgO and TiO2 to determine the optimal enhancement ratio. Hardness, compression, and bending tests were calculated to check the mechanical properties of pure and composite bone cement. The surface structure was studied using Fourier transform infrared spectroscopy (FTIR) and Field emission scanning electron microscopy (FE-SEM). Setting temperature, porosity, and degradation were calculated for each specimen ratio to check values matched with the standard range of bone cement. The results demonstrate a slight decrease in porosity up to 2.2% and degradation up to 0.17% with NP-containing composites, as well as acceptable variations in FTIR and setting temperature. The compression strength increased by 2.8% and hardness strength increased by 1.89% on adding 0.5%w/w of MgO and 1.5%w/w TiO2 NPs. Bending strength increases by 0.35% on adding 1.5% w/w of MgO and 0.5% w/w TiO2 NPs, however, SEM scan shows remarkable improvement for surface structure.

Static Compressive Behavior and Failure Mechanism of Tantalum Scaffolds with Optimized Periodic Lattice Fabricated by Laser-Based Additive Manufacturing

Porous tantalum (Ta) scaffolds have been extensively used in the clinic for reconstructing bone tissues owing to their outstanding corrosion resistance, biocompatibility, osteointegration, osteoconductivity, and mechanical properties. Additive manufacturing (AM) has an advantage in fabricating patient-specific and anatomical-shape-matching bone implants with controllable and well-designed porous architectures through tissue engineering. The sharp angles of strut joints in porous structures can cause stress concentration, reducing mechanical properties of the structures. In this study, porous Ta scaffolds comprising rhombic dodecahedron lattice unit cells with optimized node radius and porosities of 65%, 75%, and 85% were designed and fabricated by AM. The porous architecture and microstructure were characterized. The compressive behavior and failure mechanism of the material were explored through experimental compression tests and finite element analysis (FEA). Morphological evaluations revealed that the Ta scaffolds are fully interconnected, and the struts are dense. No processing defects and fractures were observed on the surface of struts. The scaffolds exhibited compressive yield strength of 5.8-32.3 MPa and elastic modulus of 0.6-4.5 GPa, comparable to those of human cancellous and trabecular bone. The compressive stress-strain curves of all samples show ductile deformation behavior accompanied by a smooth plateau region. The AM-fabricated rhombic dodecahedron lattice Ta scaffolds exhibited excellent ductility and mechanical reliability and plastic failure due to bending deformation under compressive loading. Deformation and factures primarily occurred at the junctions of the rhombus-arranged struts in the longitudinal section. Moreover, the struts in the middle of the scaffolds underwent a larger deformation than those close to the loading ends. FEA revealed a smooth stress distribution on the rhombic dodecahedron lattice structure with optimized node radius and stress concentration at the junctions of rhombus-arranged struts in the longitudinal section, which is in good agreement with the experimental results. Thus, the AM-fabricated Ta scaffolds with optimized node radius are promising alternatives for bone repair and regeneration.

Microstructure and Biomechanical Properties in Selective Laser Melting of Porous Metal Implants

Two kinds of porous structure design strategies, ring-support (RS) and column-support (CS), are proposed for human implants. The accurate design of porosity is realized by adjusting the pore characteristics, such as strut diameter, pore diameter, and unit size. Porous specimens with porosity of 50%, 60%, 70%, and 80% were prepared by selective laser melting. The three-dimensional pore structure is basically consistent with the design characteristics, and the measured porosity is slightly lower than design value. The microstructure, microhardness, and friction and wear properties of the samples were studied. The results show that the performance along the scanning orientation is slightly better than that along the forming orientation. The compression and dynamic elastic modulus of porous specimens with different structures and porosities were analyzed. The CS porous with 60-80% porosity has suitable compressive strength and elastic modulus, which is close to that of human tissue, and effectively avoids the stress shielding phenomenon.

Comparison of osteogenic capability of 3D-printed bioceramic scaffolds and granules with different porosities for clinical translation

Pore parameters, structural stability, and filler morphology of artificial implants are key factors influencing the process of bone tissue repair. However, the extent to which each of these factors contributes to bone formation in the preparation of porous bioceramics is currently unclear, with the two often being coupled. Herein, we prepared magnesium-doped wollastonite (Mg-CSi) scaffolds with 57% and 70% porosity (57-S and 70-S) via a 3D printing technique. Meanwhile, the bioceramic granules (57-G and 70-G) with curved pore topography (IWP) were prepared by physically disrupting the 57-S and 70-S scaffolds, respectively, and compared for in vivo osteogenesis at 4, 10, and 16 weeks. The pore parameters and the mechanical and biodegradable properties of different porous bioceramics were characterized systematically. The four groups of porous scaffolds and granules were then implanted into a rabbit femoral defect model to evaluate the osteogenic behavior in vivo. 2D/3D reconstruction and histological analysis showed that significant bone tissue production was visible in the central zone of porous granule groups at the early stage but bone tissue ingrowth was slower in the porous scaffold groups. The bone tissue regeneration and reconstruction capacity were stronger after 10 weeks, and the porous architecture of the 57-S scaffold was maintained stably at 16 weeks. These experimental results demonstrated that the structure-collapsed porous bioceramic is favorable for early-stage osteoconduction and that the 3D topological scaffolds may provide more structural stability for bone tissue growth for a long-term stage. These findings provide new ideas for the selection of different types of porous bioceramics for clinical bone repair.

Porous metal implants: processing, properties, and challenges

Porous and functionally graded materials have seen extensive applications in modern biomedical devices-allowing for improved site-specific performance; their appreciable mechanical, corrosive, and biocompatible properties are highly sought after for lightweight and high-strength load-bearing orthopedic and dental implants. Examples of such porous materials are metals, ceramics, and polymers. Although, easy to manufacture and lightweight, porous polymers do not inherently exhibit the required mechanical strength for hard tissue repair or replacement. Alternatively, porous ceramics are brittle and do not possess the required fatigue resistance. On the other hand, porous biocompatible metals have shown tailorable strength, fatigue resistance, and toughness. Thereby, a significant interest in investigating the manufacturing challenges of porous metals has taken place in recent years. Past research has shown that once the advantages of porous metallic structures in the orthopedic implant industry have been realized, their biological and biomechanical compatibility-with the host bone-has been followed up with extensive methodical research. Various manufacturing methods for porous or functionally graded metals are discussed and compared in this review, specifically, how the manufacturing process influences microstructure, graded composition, porosity, biocompatibility, and mechanical properties. Most of the studies discussed in this review are related to porous structures for bone implant applications; however, the understanding of these investigations may also be extended to other devices beyond the biomedical field.

Relationship between CT-Derived Bone Mineral Density and UTE-MR-Derived Porosity Index in Equine Third Metacarpal and Metatarsal Bones

Fatigue-related subchondral bone injuries of the third metacarpal/metatarsal (McIII/MtIII) bones are common causes of wastage, and they are welfare concerns in racehorses. A better understanding of bone health and strength would improve animal welfare and be of benefit for the racing industry. The porosity index (PI) is an indirect measure of osseous pore size and number in bones, and it is therefore an interesting indicator of bone strength. MRI of compact bone using traditional methods, even with short echo times, fail to generate enough signal to assess bone architecture as water protons are tightly bound. Ultra-short echo time (UTE) sequences aim to increase the amount of signal detected in equine McIII/MtIII condyles. Cadaver specimens were imaged using a novel dual-echo UTE MRI technique, and PI was calculated and validated against quantitative CT-derived bone mineral density (BMD) measures. BMD and PI are inversely correlated in equine distal Mc/MtIII bone, with a weak mean r value of -0.29. There is a statistically significant difference in r values between the forelimbs and hindlimbs. Further work is needed to assess how correlation patterns behave in different areas of bone and to evaluate PI in horses with and without clinically relevant stress injuries.

Research progress of 3D printed poly (ether ether ketone) in the reconstruction of craniomaxillofacial bone defects

The clinical challenge of bone defects in the craniomaxillofacial region, which can lead to significant physiological dysfunction and psychological distress, persists due to the complex and unique anatomy of craniomaxillofacial bones. These critical-sized defects require the use of bone grafts or substitutes for effective reconstruction. However, current biomaterials and methods have specific limitations in meeting the clinical demands for structural reinforcement, mechanical support, exceptional biological performance, and aesthetically pleasing reconstruction of the facial structure. These drawbacks have led to a growing need for novel materials and technologies. The growing development of 3D printing can offer significant advantages to address these issues, as demonstrated by the fabrication of patient-specific bioactive constructs with controlled structural design for complex bone defects in medical applications using this technology. Poly (ether ether ketone) (PEEK), among a number of materials used, is gaining recognition as a feasible substitute for a customized structure that closely resembles natural bone. It has proven to be an excellent, conformable, and 3D-printable material with the potential to replace traditional autografts and titanium implants. However, its biological inertness poses certain limitations. Therefore, this review summarizes the distinctive features of craniomaxillofacial bones and current methods for bone reconstruction, and then focuses on the increasingly applied 3D printed PEEK constructs in this field and an update on the advanced modifications for improved mechanical properties, biological performance, and antibacterial capacity. Exploring the potential of 3D printed PEEK is expected to lead to more cost-effective, biocompatible, and personalized treatment of craniomaxillofacial bone defects in clinical applications.

Advances in additive manufacturing of polycaprolactone based scaffolds for bone regeneration

Critical sized bone defects are difficult to manage and currently available clinical/surgical strategies for treatment are not completely successful. Polycaprolactone (PCL) which is a biodegradable and biocompatible thermoplastic can be 3D printed using medical images into patient specific bone implants. The excellent mechanical properties and low immunogenicity of PCL makes it an ideal biomaterial candidate for 3D printing of bone implants. Though PCL suffers from the limitation of being bio-inert. Here we describe the use of PCL as a biomaterial for 3D printing for bone regeneration, and advances made in the field. The specific focus is on the different 3D printing techniques used for this purpose and various modification that can enhance bone regeneration following the development pathways. We further describe the effect of various scaffold characteristics on bone regeneration both in vitro and the translational assessment of these 3D printed PCL scaffolds in animal studies. The generated knowledge will help understand cell-material interactions of 3D printed PCL scaffolds, to further improve scaffold chemistry and design that can replicate bone developmental processes and can be translated clinically.

Mechanobiology-informed biomaterial and tissue engineering strategies for influencing skeletal stem and progenitor cell fate

Skeletal stem and progenitor cells (SSPCs) are the multi-potent, self-renewing cell lineages that form the hematopoietic environment and adventitial structures of the skeletal tissues. Skeletal tissues are responsible for a diverse range of physiological functions because of the extensive differentiation potential of SSPCs. The differentiation fates of SSPCs are shaped by the physical properties of their surrounding microenvironment and the mechanical loading forces exerted on them within the skeletal system. In this context, the present review first highlights important biomolecules involved with the mechanobiology of how SSPCs sense and transduce these physical signals. The review then shifts focus towards how the static and dynamic physical properties of microenvironments direct the biological fates of SSPCs, specifically within biomaterial and tissue engineering systems. Biomaterial constructs possess designable, quantifiable physical properties that enable the growth of cells in controlled physical environments both in-vitro and in-vivo. The utilization of biomaterials in tissue engineering systems provides a valuable platform for controllably directing the fates of SSPCs with physical signals as a tool for mechanobiology investigations and as a template for guiding skeletal tissue regeneration. It is paramount to study this mechanobiology and account for these mechanics-mediated behaviors to develop next-generation tissue engineering therapies that synergistically combine physical and chemical signals to direct cell fate. Ultimately, taking advantage of the evolved mechanobiology of SSPCs with customizable biomaterial constructs presents a powerful method to predictably guide bone and skeletal organ regeneration.

Analysis of the influence of surgical robot drilling parameters on the temperature of skull drilling based on Box-Behnken design

It is easy to cause thermal damage to the bone tissue when the surgical robot performs skull drilling to remove bone flaps, due to the large diameter of the drill bit, the large heat-generating area, and the long drilling time. Therefore, in order to reduce the thermal damage during the robot-assisted skull drilling process, the relationship between the drilling parameters and the drilling temperature during the skull drilling was studied in this paper. Firstly, a dynamic numerical simulation model of the skull drilling process was established by ABAQUS, and a temperature simulation plan for skull drilling was designed based on the Box-Behnken method. Then according to the simulation results, a quadratic regression model of drill diameter, feed rate, drill speed, and drilling temperature was established by using the multiple regression method. By analyzing the regression model, the influence of drilling parameters on the drilling temperature was clarified. Finally, the bone drilling experiment was carried out, and the error percentage was lower than 10.5% through the experiment to verify the reliability of the conclusion, and a safety strategy was proposed to ensure the safety of the surgical drilling process based on this experiment.

Porous surface with fusion peptides embedded in strontium titanate nanotubes elevates osteogenic and antibacterial activity of additively manufactured titanium alloy

It is still a big challenge in orthopedics to treat infected bone defects properly using medical metals. The use of three-dimensional (3D) scaffold materials that simultaneously mimic the skeletal hierarchy and induce sustainable osteogenic and antibacterial functions are a promising solution with an increasing appeal. In this study, we first designed a bifunctional fusion peptide (HHC36-RGD, HR) by linking antimicrobial peptide (HHC36) and arginine-glycine-aspartate (RGD) peptide via 6-aminohexanoic acid. Then the 3D scaffold was fabricated by additive manufacturing, and the strontium titanate nanotube structure (3D-STN) was constructed on its surface. Finally, the HR was anchored to the 3D-STN with the aid of polydopamine (PDA, P), forming the 3D-STN-P-HR scaffold. The results showed that the scaffold exhibited an ordered 3D porous structure, and that the surface was covered by a dense HHC36-RGD layer. Expectedly, the adsorption of PDA effectively slowed down the release of HR. Moreover, the functionalized scaffold had a significant inhibitory effect on Staphylococcus aureus and Escherichia coli, and its antibacterial rate could reach more than 95%. The results of in vitro cell culture experiments demonstrated that the 3D-STN-P-HR scaffold possessed excellent cytocompatibility and could promote the transcription of osteogenic differentiation-related genes and the expression of related proteins. In conclusion, the functionally modified 3D porous titanium alloy scaffold (3D-STN-P-HR) has a balanced antibacterial and osteogenic function, which bodes well for future potential in the customized functional reconstruction of complex-shaped infected bone defects.

An Investigation into the Potential of Turning Induced Deformation Technique for Developing Porous Magnesium and Mg-SiO2 Nanocomposite

A new and novel method of synthesising porous Mg materials has been explored utilising a variant of a processing method previously used for the synthesis of dense Mg materials, namely the turning-induced deformation (TID) method combined with sintering. It was found that the Mg materials synthesised possessed comparable properties to previously-synthesised porous Mg materials in the literature while subsequent sintering resulted in a more consistent mechanical response, with microwave sintering showing the most promise. The materials were also found to possess mechanical response within the range of the human cancellous bone, and when reinforced with biocompatible silica nanoparticles, presented the most optimal combination of mechanical properties for potential use as biodegradable implants due to most similarity with cancellous bone properties.

A novel peptide isolated from Catla skin collagen acts as a self-assembling scaffold promoting nucleation of calcium-deficient hydroxyapatite nanocrystals

Catla collagen hydrolysate (CH) was fractionated by chromatography and each fraction was subjected to HA nucleation, with the resultant HA-fraction composites being scored based on the structural and functional group of the HA formed. The process was repeated till a single peptide with augmented HA nucleation capacity was obtained. The peptide (4.6 kDa), exhibited high solubility, existed in polyproline-II conformation and displayed a dynamic yet stable hierarchical self-assembling property. The 3D modelling of the peptide revealed multiple calcium and phosphate binding sites and a high propensity to self-assemble. Structural analysis of the peptide-HA crystals revealed characteristic diffraction planes of HA with mineralization following the (002) plane, retention of the self-assembled hierarchy of the peptide and intense ionic interactions between carboxyl groups and calcium. The peptide-HA composite crystals were mostly of 25-40 nm dimensions and displayed 79% mineralization, 92% crystallinity, 39.25% porosity, 12GPa Young's modulus and enhanced stability in physiological pH. Cells grown on peptide-HA depicted faster proliferation rates and higher levels of osteogenic markers. It was concluded that the prerequisite for HA nucleation by a peptide included: a conserved sequence with a unique charge topology allowing calcium chelation and its ability to form a dynamic self-assembled hierarchy for crystal propagation.

A dual osteoconductive-osteoprotective implantable device for vertical alveolar ridge augmentation

Repair of large oral bone defects such as vertical alveolar ridge augmentation could benefit from the rapidly developing additive manufacturing technology used to create personalized osteoconductive devices made from porous tricalcium phosphate/hydroxyapatite (TCP/HA)-based bioceramics. These devices can be also used as hydrogel carriers to improve their osteogenic potential. However, the TCP/HA constructs are prone to brittle fracture, therefore their use in clinical situations is difficult. As a solution, we propose the protection of this osteoconductive multi-material (herein called “core”) with a shape-matched “cover” made from biocompatible poly-ɛ-caprolactone (PCL), which is a ductile, and thus more resistant polymeric material. In this report, we present a workflow starting from patient-specific medical scan in Digital Imaging and Communications in Medicine (DICOM) format files, up to the design and 3D printing of a hydrogel-loaded porous TCP/HA core and of its corresponding PCL cover. This cover could also facilitate the anchoring of the device to the patient's defect site via fixing screws. The large, linearly aligned pores in the TCP/HA bioceramic core, their sizes, and their filling with an alginate hydrogel were analyzed by micro-CT. Moreover, we created a finite element analysis (FEA) model of this dual-function device, which permits the simulation of its mechanical behavior in various anticipated clinical situations, as well as optimization before surgery. In conclusion, we designed and 3D-printed a novel, structurally complex multi-material osteoconductive-osteoprotective device with anticipated mechanical properties suitable for large-defect oral bone regeneration.

A Bioinspired Orthopedic Biomaterial with Tunable Mechanical Properties Based on Sintered Titanium Fibers

Inadequate mechanical compliance of orthopedic implants can result in excessive strain of the bone interface, and ultimately, aseptic loosening. It is hypothesized that a fiber-based biometal with adjustable anisotropic mechanical properties can reduce interface strain, facilitate continuous remodeling, and improve implant survival under complex loads. The biometal is based on strategically layered sintered titanium fibers. Six different topologies are manufactured. Specimens are tested under compression in three orthogonal axes under 3-point bending and torsion until failure. Biocompatibility testing involves murine osteoblasts. Osseointegration is investigated by micro-computed tomography and histomorphometry after implantation in a metaphyseal trepanation model in sheep. The material demonstrates compressive yield strengths of up to 50 MPa and anisotropy correlating closely with fiber layout. Samples with 75% porosity are both stronger and stiffer than those with 85% porosity. The highest bending modulus is found in samples with parallel fiber orientation, while the highest shear modulus is found in cross-ply layouts. Cell metabolism and morphology indicate uncompromised biocompatibility. Implants demonstrate robust circumferential osseointegration in vivo after 8 weeks. The biometal introduced in this study demonstrates anisotropic mechanical properties similar to bone, and excellent osteoconductivity and feasibility as an orthopedic implant material.

Extraction of Hydroxyapatite from Camel Bone for Bone Tissue Engineering Application

Waste tissues such as mammalian bone are a valuable source from which to extract hydroxyapatite. Camel bone-based hydroxyapatite (CBHA) was extracted from the femur of camel bones using a defatting and deproteinization procedure. The extracted CBHA was mechanically, chemically, physically, morphologically and structurally characterized. Fourier-Transform Infra-Red (FTIR) spectra, Micro-Raman, and X-ray diffraction analysis confirmed successful extraction of hydroxyapatite. The mechanical properties of the CBHA scaffold were measured using a Universal Instron compression tester. Scanning electron microscopy showed the presence of a characteristic interconnected porous architecture with pore diameter ranging from 50-600 µm and micro-computer tomography (Micro-CT) analysis identified a mean porosity of 73.93. Thermogravimetric analysis showed that the CBHA was stable up to 1000 °C and lost only 1.435% of its weight. Inductively coupled plasma-mass spectrometry (ICP-MS) and Energy-dispersive-X-ray (EDX) analysis demonstrated the presence of significant amounts of calcium and phosphorus and trace ions of sodium, magnesium, zinc, lead and strontium. Following 21 days of incubation in simulated body fluid (SBF), the pH fluctuated between 10-10.45 and a gradual increase in weight loss was observed. In conclusion, the extracted CBHA is a promising material for future use in bone tissue regeneration applications.

Preparation and Characterization of Porous Poly(Lactic Acid)/Poly(Butylene Adipate-Co-Terephthalate) (PLA/PBAT) Scaffold with Polydopamine-Assisted Biomineralization for Bone Regeneration

The development of scaffolds that simultaneously provide porous architectures and osteogenic properties is the major challenge in tissue engineering. Herein, a scaffold with high porosity and well interconnected networks, namely poly(lactic acid)/poly(butylene adipate-co-terephthalate) (PLA/PBAT), was fabricated using the gas foaming/ammonium bicarbonate particulate leaching technique. Mussel-inspired polydopamine (PDA)-assisted biomineralization generated by two-step simple soaking in dopamine solution and 10× SBF-like solution was performed to improve the material's osteogenicity. Highly porous scaffolds available in less organized opened cell structures with diameters ranging from 10 µm to 100 µm and 200 µm to 500 µm were successfully prepared. The well interconnected porous architectures were observed through the whole thickness of the scaffold. The even deposition of the organic-inorganic bioactive mineralized layer composed of PDA and nano-scale hydroxyapatite (HA) crystals on the scaffold surface was evidenced by scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDX), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The developed scaffold exhibited high total porosity (84.17 ± 1.29%), a lower surface contact angle (θ = 45.7 ± 5.9°), lower material degradation rate (7.63 ± 2.56%), and a high level of material biocompatibility. The MTT assay and Alizarin Red S staining (ARS) confirmed its osteogenic enhancement property toward human osteoblast-like cells (MG-63). These results clarified that the developed porous PLA/PBAT scaffold with PDA-assisted biomineralization exhibited good potential for application as a biomaterial for bone tissue regeneration and hard tissue engineering.

Evaluation of Mechanical Properties of Porous Chitosan/Gelatin/Polycaprolactone Bone Scaffold Prepared by Microwave Foaming Method

Bone tissue may suffer from bone injury and bone defects due to accidents or diseases. Since the demand for autologous bone and allograft tissue far exceeds the supply, bone scaffolds have taken the lead. The use of bone scaffolds is one of the measures to help heal or regenerate bone tissue. Therefore, a new bone scaffold was proposed in this study, which has a simpler preparation process and stronger performance. This study proposes bone scaffolds with an attempt to use polymers that are synthesized separately with three types of minerals as the filler using the microwave foaming method as follows. A 0.1 wt% of montmorillonite (MMT), zinc oxide (ZnO), or titanium dioxide (TiO₂) is added to chitosan (CS)/gelatin mixtures, respectively, after which sodium bicarbonate is added as a foaming agent, thereby forming porous gels. The polymer synthesized from three minerals was used as filler. The following microwave foaming method was adopted: 0.1 wt% MMT, ZnO, or TiO₂ was added to the CS/gelatin mixture, and then sodium bicarbonate was added as a foaming agent to form a porous gel. Next, porous gels and polycaprolactone were combined in a self-made mold in order to form bone scaffolds. A stereo microscope is used to observe the morphology of bone scaffolds, after which the pore size analysis, pore connectivity, swell property, porosity, and compressive strength are tested, examining the effects of the mineral type on bone scaffolds. The test results indicate that with MMT being the filler and sodium bicarbonate being the foaming agent, the resulting bone scaffolds yield a porous structure with a pore size between 120 μm and 370 μm. Besides, the incorporation of polycaprolactone also provides samples of 1MCG-P, 2MCG-P, and 5MCG-P with a certain compressive strength of 150–170 MPa. To sum up, the test results substantiate that a combination of the microwave foaming method and MMT generates a porous structure for bone scaffolds (1MCG-P, 2MCG-P, and 5MCG-P), involving a porosity of 38%, an inter-connected porous structure, and the compressive strength that exceeds 150 MPa.

Temperature Changes during Implant Osteotomy Preparations in Human Cadaver Tibiae Comparing MIS® Straight Drills with Densah® Burs

(1) Background: Several studies showed a sustained temperature of 47 °C or 50 °C for one minute resulted in vascular stasis and bone resorption with only limited bone regrowth over a 3-4-week healing period. The purpose of the present study was to evaluate the temperature changes (ΔΤ) that occur during the preparation of dental implant osteotomies using MIS^® straight drills versus Densah^® burs in a clockwise (cutting) drilling protocol. (2) Methods: Two hundred forty (240) osteotomies of two different systems' drills were prepared at 6 mm depth at 800, 1000, and 1200 revolutions per minute (RPM), in fresh, unembalmed tibiae, obtained by a female cadaver. ΔΤ was calculated by subtracting the baseline temperature on the tibial surface, from the maximum temperature-inside the osteotomy (ΔT = T_max - T_base). The variables were evaluated both for their individual and for their synergistic effect on ΔΤ with the use of one-, two-, three- and four-way interactions; (3) Results: An independent and a three-way interaction (drill design, drill width, and RPM) was found in all three RPM for the Densah^® burs and at 1000 RPM for the MIS^® straight drills. As Densah^® burs diameter increased, ΔΤ decreased. The aforementioned pattern was seen only at 1000 RPM for the MIS^® straight drills. The usage of drills 20 times more than the implant manufacturers' recommendation did not significantly affect the ΔΤ. A stereoscopic examination of the specimens confirmed the findings. (4) Conclusions: The independent and synergistic effect of drills' diameter, design and RPM had a significant effect on ΔΤ in human tibiae, which never exceeded the critical threshold of 47 °C.

Three-dimensional radiological anatomy of condyle trabecular bone based on a Volume-of-Interest analysis

OBJECTIVES

Three-dimensional radiological anatomic characteristics of condyle trabeculae was obtained quantitatively based on a volume-of-interest (VOI) analysis.

METHODS

Nine human mandibular condyle specimens were scanned by micro-computed tomography (micro-CT). A total of 34 VOIs were selected from each condyle specimen, which were divided into six layers and four parts to analyze the morphological characteristics of trabeculae based on cylindrical VOIs with a diameter and height of 2 mm. One-way analysis of variance was used to compare the regional differences of morphological parameters among each layer and part.

RESULTS

Values for bone mineral density, bone volume/total volume, trabecular thickness, and trabecular bone number were greater in the anterior part compared with the posterior part; and the lateral part was larger than the medial part in the first, second, and third layers, while the medial part was larger in the fourth and fifth layers; these values in the first and sixth layers were much larger, while those in the third and fourth layers were smaller. Bone surface area/bone volume, trabecular spacing, and trabecular bone pattern factor were larger in the posterior part than in the anterior part; and the lateral part was larger than the medial part in the fourth and fifth layers, while the medial part was larger in the first and second layers.

CONCLUSIONS

The morphological distribution of VOIs was anisotropic within trabecular bone of human mandibular condyles. The upper and lower ends of trabecular bone were much more compact, with higher bone density, trabecular thickness, and trabecular number than in the middle layers.

Ceramic Scaffolds for Bone Augmentation: Design and Characterization with SEM and Confocal Microscopy

Bone scaffolds must fulfil numerous and sometimes contradictory characteristics: biocompatibility, bioactivity, high porosity, and appropriate mechanical strength. To tackle some of these issues, this study has several aims for the development of such scaffolds for dentistry applications: (i) to utilize appropriate materials (ceramics and sponges) and to introduce a novel, potentially performant ceramic material; (ii) to characterize the obtained scaffolds by using a range of methods; (iii) to compare and to correlate the assessment results with the scope to validate them reciprocally. There are two commercially available dental ceramics (i.e., Ceramco iC Natural Enamel (E) and Ceramco iC Natural Dentine (D), (DeguDent GmbH, Hanau-Wolfgang, Deutschland)) that are considered, as well as a new-developed porcelain (ceramic C). To obtain porous structures of scaffolds, each ceramic is introduced in two different sponges: a denser one, green (G) and a less dense one, blue (B). A total of 60 samples are manufactured and divided in six study groups, obtained by combining the above materials: GE, BE, GD, BD, GC, and BC (where the first letter represents the sponge type and the second one the utilized ceramic). Several methods are applied to characterize their chemical composition, as well as their macro- and micro-porosity: X-ray Diffraction (XRD), apparent porosity measurements, scanning electronic microscopy (SEM), and confocal microscopy (CM). The latter two methods image the inner (porous) and the outer/cortical (denser) areas of the samples. The results show a good porosity (i.e., dimensions and uniformity of pores) of around 65% for the final group BC, with satisfactory values of around 51% for BD and GC. A certain correlation is made between SEM, CM, and the apparent porosity results. The biocompatibility of the new ceramic C is demonstrated. Finally, a necessary trade-off is made with the mechanical strength of the obtained scaffolds, which was also evaluated. From this point of view, Group BD has the highest compressive strength of around 4 MPa, while Group BC comes second, with around 2 MPa. This trade-off between porosity and mechanical strength suggests a choice between Groups BC and BD, which are the best with regard to the porosity and mechanical strength criterium, respectively.

Micro-computed tomography evaluation of bone architecture in various forms of unilateral condylar hyperplasia

Condylar hyperplasia is one of the causes of facial asymmetry and malocclusion, characterized by enlargement of the lower jaw due to excessive condyle growth activity. The aim of this study was to use micro-computed tomography (micro-CT) to evaluate the bone architecture of the condylar head and determine whether there are differences between patients with various forms of unilateral condylar hyperplasia (UCH): hemimandibular hyperplasia, elongation, and mixed form. The cohort consisted of 28 patients with a mean age of 21.9 years. All patients underwent surgical treatment (condylar shaving) for active pathological growth activity. The portion of the condylar head removed was imaged by micro-CT and subsequently evaluated. Micro-CT imaging and semiquantitative and quantitative evaluation of the bone structure (percentage bone volume, surface density, trabecular thickness, trabecular separation, degree of anisotropy, and porosity of the subchondral bone) did not reveal significant differences between the individual types of condylar hyperplasia (P > 0.05). There were no significant differences in bone structure between the anterior and posterior portions of the condylar head. No statistically significant differences between individual groups of UCH were found in the micro-CT evaluation of the condylar head bone architecture.

Performance of innovative nanomaterials for bone remains consolidation and effect on 14C dating and on palaeogenetic analysis

An innovative protocol for the consolidation of ancient bone remains based on the use of nanometric HydroxyAPatite (HAP) was set up and tested through a multidisciplinary approach. A new protocol for the synthesis of HAP nanoparticles was developed, and the composition of the obtained nanomaterial was investigated through Fourier Transform Infrared Spectroscopy (FTIR) and X-Ray Diffraction (XRD); sizes, shape and morphology of the synthesized particles were studied by Scanning Electron Microscopy (SEM). The consolidation performance was evaluated by testing the new nanomaterial on degraded ancient bone findings. An increase of the mineral density and of the micro-hardness of the bone were observed. The new consolidation method was also tested to assess possible effects on the palaeogenetic analysis and radiocarbon dating on the treated bones. The consolidation treatment does not introduce any contaminations that could affect radiocarbon dating and has no general detrimental impact on the genetic characterization of the skeletal remains. This consolidation procedure represents a more compatible conservation tool with respect to traditional procedures: it has been shown that the treatment is effective, easily-applicable and compatible with post-consolidation analysis.

A biological nanofoam: The wall of coniferous bisaccate pollen

The outer layer of the pollen grain, the exine, plays a key role in the survival of terrestrial plant life. However, the exine structure in different groups of plants remains enigmatic. Here, modern and fossil coniferous bisaccate pollen were examined to investigate the detailed three-dimensional structure and properties of the pollen wall. X-ray nanotomography and volume electron microscopy are used to provide high-resolution imagery, revealing a solid nanofoam structure. Atomic force microscopy measurements were used to compare the pollen wall with other natural and synthetic foams and to demonstrate that the mechanical properties of the wall in this type of pollen are retained for millions of years in fossil specimens. The microscopic structure of this robust biological material has potential applications in materials sciences and also contributes to our understanding of the evolutionary success of conifers and other plants over geological time.

The effect of low intensity pulsed ultrasound on mandibular condylar growth in young adult rats

There is a need for more effective methods to enhance mandibular growth in young adults with mandibular deficiency. Previous studies suggest that low intensity pulsed ultrasound (LIPUS) can enhance mandibular growth in growing individuals. This study aimed to evaluate the potential growth changes of the mandible following 4-week LIPUS application in young adult rats. Nineteen ≈120-day-old female rats were allocated to experimental (n = 10) and control (n = 9) groups. The animals in the experimental group were treated with LIPUS to their temporomandibular joints (TMJs) bilaterally, 20 min each day for 28 consecutive days. Animals were then euthanized; gross morphological evaluation was performed on 2D photographs and 3D virtual models of hemi-mandibles, and microstructural assessment was done for the mandibular condyle (MC). Evaluation of mineralization and microarchitecture properties of subchondral cancellous bone was performed by micro-computed tomography (μCT) scanning. Qualitative and histomorphometric analysis was done on condylar cartilage and subchondral bone following Alcian Blue/PAS and Goldner's Trichrome staining. Vital flourochrome (calcein green) labeling was also utilized to determine the amount of endochondral bone growth. Gross morphological evaluations showed a slight statistically non-significant increase especially in the main condylar growth direction in the LIPUS group. Moreover, 3D evaluation depicted an enhanced periosteal bone apposition at the site of LIPUS application. Microstructural analysis revealed that LIPUS stimulates both chondrogenesis and osteogenesis and enhances endochondral bone formation in young adult rat MC. Furthermore, the effect of LIPUS on osteogenic cells of subchondral cancellous bone was notable. To conclude, LIPUS can enhance young adult rats' MC residual growth potential.

Biomaterials and osteoradionecrosis of the jaw: Review of the literature according to the SWiM methodology

OBJECTIVES

To systematically present and interpret the current literature on research and treatment perspectives for mandibular osteoradionecrosis (mORN) in the field of biomaterials.

MATERIAL AND METHODS

A systematic review of the literature using the "Synthesis without meta-analysis" (SWiM) methodology was performed on PubMed, Embase and Cochrane, focusing on the implantation of synthetic biomaterials for bone reconstruction in mORN in humans and/or animal models. The primary endpoints were the composition, efficacy on mORN and tolerance of the implanted synthetic biomaterials.

RESULTS

Forty-seven references were obtained and evaluated in full-text by two assessors. Ten (8 in humans and 2 in animal models) met the eligibility criteria and were included for analysis. Materials most often comprised support plates or metal mesh (5 of 10 cases) in combination with grafts or synthetic materials (phosphocalcic ceramics, glutaraldehyde). Other ceramic/polymer composites were also implanted. In half of the selected reports, active compounds (molecules, growth factors, lysates) and/or cells were associated with the reconstruction material. The number of articles referring to implantation of biomaterials for the treatment of mORN was small, and the properties of the implanted biomaterials were generally poorly described, thus limiting a thorough understanding of their role.

CONCLUSION

In preventing the morbidity associated with some reconstructive surgeries, basic research has benefitted from recent advances in tissue engineering and biomaterials to repair limited bone loss.

Design, evaluation, and optimization of 3D printed truss scaffolds for bone tissue engineering

One of tissue engineering's main goals is to fabricate three-dimensional (3D) scaffolds with interconnected pores to reconstruct and regenerate damaged or deformed tissues and organs. In this regard, 3D printing is a promising technique for the fabrication of tissue scaffolds, which can precisely make predetermined and complicated architectures. This study aims to investigate and optimize the physical, mechanical, and biological properties of 3D truss architecture tissue scaffolds with different pore geometries. The mechanical properties of poly (methyl methacrylate) scaffolds are analysed experimentally and numerically. Furthermore, the mechanical and physical properties of scaffolds are optimized with response surface methodology (RSM), and cell adhesion of the 3D truss scaffold studies. Results demonstrate that mechanical properties of the simple and gradient scaffolds have different mechanical behaviors that are strongly correlated with pore size and their architectures, rather than merely the values of the porosity. It is also observed that the RSM technique can enable designers to enhance mechanical and physical properties of scaffolds at low cost. Moreover, the results of biological behaviour can endorse the reliability of 3D truss architecture in bone tissue engineering.

Study on mechanical properties and permeability of elliptical porous scaffold based on the SLM manufactured medical Ti6Al4V

In this paper, we take the elliptical pore structure which is similar to the microstructure of cancellous bone as the research object, four groups of bone scaffolds were designed from the perspective of pore size, porosity and pore distribution. The size of the all scaffolds were uniformly designed as 10 × 10 × 12 mm. Four groups of model samples were prepared by selective laser melting (SLM) and Ti6Al4V materials. The statics performance of the scaffolds was comprehensively evaluated by mechanical compression simulation and mechanical compression test, the manufacturing error of the scaffold samples were evaluated by scanning electron microscope (SEM), and the permeability of the scaffolds were predicted and evaluated by simulation analysis of computational fluid dynamics (CFD). The results show that the different distribution of porosity, pore size and pores of the elliptical scaffold have a certain influence on the mechanical properties and permeability of the scaffold, and the reasonable size and angle distribution of the elliptical pore can match the mechanical properties and permeability of the elliptical pore scaffold with human cancellous bone, which has great potential for research and application in the field of artificial bone scaffold.

In-situ analysis of the hydration ability of bone graft material using a synchrotron radiation X-ray micro-CT

The conventional micro-computed tomography (μCT) is a non-destructive imaging technique used for obtaining 2D and 3D information for scaffolds. The main composition and internal structure are important in mimicking and designing the characteristics of natural bone. This study was three-dimensional evaluating the external or internal structures and the hydration effects of bone graft materials by using the in-situ image technique. Synchrotron radiation micro-computed tomography (SR-μCT) was used to extract information on the geometry of two biphasic calcium phosphates (BCP) with identical chemicals and different micro-macro porosity, pore size distribution, and pore interconnection pathways. Volume analysis by hydration was used to measure the two bone graft materials at 0, 5, and 10-min intervals. The SR-μCT image was achieved with information regarding the internal pore structure and hydration effects evaluated under 3D visualization. Both types of bone graft materials showed structures suitable for tissue engineering applications. The SR-μCT in-situ techniques with 3D information provided a detailed view of the structures. Thus, SR-μCT could be an available, unbiased 3D alternative to in-situ analysis.

Effect of multiple injections of botulinum toxin into painful masticatory muscles on bone density in the temporomandibular complex

Background

Adverse effects of masticatory muscle injections of Botulinum Toxin (Btx) have been noted in animal and, less dramatically, human studies.

Objective

Among women treated in multiple community‐based private practices, to compare TMJ bone density and mandibular condylar volume between patients with myofascial TMJD receiving multiple masticatory muscle Btx treatments and similarly diagnosed women not receiving such treatment.

Methods

Cohorts consisted of women whose treatment charts indicated a diagnosis of myofascial TMJD: 35 received at least 2 Btx treatment cycles; 44 received none. Bone density at pre‐specified regions of interest (ROI) was defined by grey scale values from Cone Beam CT, adjusting for a fixed density phantom included in each scan. Mean bone density and mandibular condyle volume were compared between groups. Dose‐response effects were tested within the Btx‐exposed group.

Results

The mean density of primary and secondary ROIs was similar between exposure groups, as was condylar volume. Among Btx‐exposed women, increasing dose of Btx to the temporalis muscle was inversely proportional to the density of the trabecular area of the mandible body. Many Btx‐exposed women received smaller doses of Btx to the masseter muscles than in most TMJD Btx clinical trials.

Conclusion

Masticatory muscle injections of Btx failed to produce clinically significant TMJ bone‐related changes. Should Btx receive regulatory approval for treatment of myofascial TMJD, a phase IV study is recommended to evaluate potential adverse effects of Btx on bone and muscle when administered at higher doses and/or for more treatment cycles.

"Variances" and "in-variances" in hierarchical porosity and composition, across femoral tissues from cow, horse, ostrich, emu, pig, rabbit, and frog

It is very well known that bone is a hierarchically organized material produced by bone cells residing in the fluid environments filling (larger) vascular pores and (smaller) lacunar pores. The extracellular space consists of hydroxyapatite crystals, collagen type I molecules, and water with non-collageneous organics. It is less known to which extent the associated quantities (mineral, organic, and water concentrations; vascular, lacunar, and extracellular porosities) vary across species, organs, and ages. We here investigate the aforementioned quantities across femoral shaft tissues from cow, horse, emu, frog, ostrich, pig, and rabbit; by means of light microscopy and dehydration-demineralization tests; thereby revealing interesting invariances: The extracellular volume fractions of organic matter turn out to be similar across all tested non-amphibian tissues; as do the extracellular volume fractions of hydroxyapatite across all tested mammals. Hence, the chemical composition of the femoral extracellular bone matrix is remarkably "invariant" across differently aged mammals; while the water content shows significant variations, as does the partitions of water between the different pore spaces. The latter exhibit strikingly varying morphologies as well. This finding adds to the ample "universal patterns" in the sense of evolutionary developmental biology; and it provides interesting design requirements for the development of novel biomimetic tissue engineering solutions.

Development and Characterization of a Biocomposite Material from Chitosan and New Zealand-Sourced Bovine-Derived Hydroxyapatite for Bone Regeneration

A biocomposite scaffold was developed using chitosan (CS) and bovine-derived hydroxyapatite (BHA). The prepared CS-BHA biocomposite scaffold was characterized for its physiochemical and biological properties and compared against control BHA scaffolds to evaluate the effects of CS. Energy-dispersive X-ray analysis confirmed the elemental composition of the CS-BHA scaffold, which presented peaks for C and O from CS and Ca and P along with trace elements in the bovine bone such as Na, Mg, and Cl. Fourier transform infrared spectroscopy confirmed the presence of phosphate, hydroxyl, carbonate, and amide functional groups attributed to the CS and BHA present in the biocomposite scaffolds. The CS-BHA scaffolds demonstrated an interconnected porous structure with pore sizes ranging from 60 to 600 μm and a total porosity of ∼64-75%, as revealed by scanning electron microscopy and micro-CT analyses, respectively. Furthermore, thermogravimetric analysis revealed that the CS-BHA scaffold lost 70% of its weight when heated up to 1000 °C, which is characteristic of CS phase decomposition in the biocomposite. In vitro studies demonstrated that the CS-BHA scaffolds were biocompatible toward Saos-2 osteoblast-like cells, showing high cell viability and a significant increase in cell proliferation across the measured timepoints compared to the controls.

Effect of total edentulism on the internal bone structure of mandibular condyle: a preliminary study

OBJECTIVE

The aim of this study was to assess the internal structure of the mandibular condyles in patients with total edentulism by applying fractal analysis on cone-beam computed tomography (CBCT) images and compare with dentate subjects.

METHODS

A total of 136 mandibular condyles were assessed. All CBCT images were prepared with 0.25-mm slice thickness and maximum magnification. A 64 × 64 pixel region of interest (ROI) within the trabecular bone in the center of the condyle was selected. Fractal analysis was performed using White and Rudolph's box-counting method.

RESULTS

Control and study groups were age and gender-matched. The mean fractal dimension (FD) value of the study group was significantly lower compared to the control group (p < 0.01). In the study group, the mean FD value of the females was significantly lower than males (p = 0.01). For the control group, there was no significant difference between the genders for FD (p = 0.11). There was no significant difference between the age subgroups of the female study group and the male control group for FD (p = 0.22, p = 0.33). The mean FD value of the younger age subgroup was significantly higher compared to the older age subgroup in the female control and male study group (p = 0.03, p = 0.01).

CONCLUSION

The internal bone structure of mandibular condyles in edentulous patients was found to be affected by edentulism. Fractal analysis can be used as an effective method for assessing temporomandibular joint health.

Elastic Modulus of Woven Bone: Correlation with Evolution of Porosity and X-ray Greyscale

The woven bone created during the healing of bone regeneration processes is characterized as being extremely inhomogeneous and having a variable stiffness that increases with time. Therefore, it is important to study how the mechanical properties of woven bone are dependent on its microarchitecture and especially on its porosity and mineral content. The porosity and the x-ray greyscale of specimens taken from bone transport studies in sheep were assessed by means of ex vivo imaging. Our study demonstrates that the porosity of the woven bone in the distraction area diminishes during the healing process from 73.3% 35 days after surgery to 31.9% 525 days after surgery. In addition, the woven bone's porosity is negatively correlated with its Young's modulus. The x-ray greyscale, was measured as an indicator of the level of mineralization of the woven bone. Greyscale index has been demonstrated to be inversely proportional to porosity and to increase to up to 60-80% of the level in cortical bone. The results of this study may contribute to the development of micromechanical models of woven bone and improvements in in silico modelling.

A review on computer-aided design and manufacturing of patient-specific maxillofacial implants

Introduction: Various prefabricated maxillofacial implants are used in the clinical routine for the surgical treatment of patients. In addition to these prefabricated implants, customized CAD/CAM implants become increasingly important for a more precise replacement of damaged anatomical structures. This paper reviews the design and manufacturing of patient-specific implants for the maxillofacial area.Areas covered: The contribution of this publication is to give a state-of-the-art overview in the usage of customized facial implants. Moreover, it provides future perspectives, including 3D printing technologies, for the manufacturing of patient-individual facial implants that are based on patient's data acquisitions, like Computed Tomography (CT) or Magnetic Resonance Imaging (MRI).Expert opinion: The main target of this review is to present various designing software and 3D manufacturing technologies that have been applied to fabricate facial implants. In doing so, different CAD designing software's are discussed, which are based on various methods and have been implemented and evaluated by researchers. Finally, recent 3D printing technologies that have been applied to manufacture patient-individual implants will be introduced and discussed.

A step toward engineering thick tissues: Distributing microfibers within 3D printed frames

Microfiber mats for tissue engineering scaffolds support cell growth, but are limited by poor cell infiltration and nutrient transport. Three-dimensional printing, specifically fused deposition modeling (FDM), can rapidly produce customized constructs, but macroscopic porosity resulting from low resolution reduces cell seeding efficiency and prevents the formation of continuous cell networks. Here we describe the fabrication of hierarchical scaffolds that integrate a fibrous microenvironment with the open macropore structure of FDM. Biodegradable tyrosine-derived polycarbonate microfibers were airbrushed iteratively between layers of 3D printed support structure following optimization. Confocal imaging showed layers of airbrushed fiber mats supported human dermal fibroblast growth and extracellular matrix development throughout the scaffold. When implanted subcutaneously, hierarchical scaffolds facilitated greater cell infiltration and tissue formation than airbrushed fiber mats. Fibronectin matrix assembled in vitro throughout the hierarchical scaffold survived decellularization and provided a hybrid substrate for recellularization with mesenchymal stromal cells. These results demonstrate that by combining FDM and airbrushing techniques we can engineer customizable hierarchical scaffolds for thick tissues that support increased cell growth and infiltration.

Polycaprolactone as biomaterial for bone scaffolds: Review of literature

Bone tissue engineering using polymer based scaffolds have been studied a lot in last decades. Considering the qualities of all the polymers desired to be used as scaffolds, Polycaprolactone (PCL) polyester apart from being biocompatible and biodegradable qualifies to an appreciable level due its easy availability, cost efficacy and suitability for modification. Its adjustable physio-chemical state, biological properties and mechanical strength renders it to withstand physical, chemical and mechanical, insults without significant loss of its properties. This review aims to critically analyse the efficacy of PCL as a biomaterial for bone scaffolds.

Functionalization of Silk Fibers by PDGF and Bioceramics for Bone Tissue Regeneration

Bone regeneration is a complex, well-organized physiological process of bone formation observed during normal fracture healing and involved in continuous remodeling throughout adult life. An ideal medical device for bone regeneration requires interconnected pores within the device to allow for penetration of blood vessels and cells, enabling material biodegradation and bone ingrowth. Additional mandatory characteristics include an excellent resorption rate, a 3D structure similar to natural bone, biocompatibility, and customizability to multiple patient-specific geometries combined with adequate mechanical strength. Therefore, endless silk fibers were spun from native silk solution isolated from silkworm larvae and functionalized with osteoconductive bioceramic materials. In addition, transgenic silkworms were generated to functionalize silk proteins with human platelet-derived growth factor (hPDGF). Both, PDGF-silk and bioceramic modified silk were then assembled into 3D textile implants using an additive manufacturing approach. Textile implants were characterized in terms of porosity, compressive strength, and cyclic load. In addition, osteogenic differentiation of mesenchymal stem cells was evaluated. Silk fiber-based 3D textile implants showed good cytocompatibility and stem cells cultured on bioceramic material functionalized silk implants were differentiating into bone cells. Thus, functionalized 3D interconnected porous textile scaffolds were shown to be promising biomaterials for bone regeneration.

Relationship between mandibular condyle and articular eminence cortication with mandibular cortical index on cone-beam CT

PURPOSE

Mandibular condyle development can be evaluated with radiographic evaluation of subchondral cortical bone. The aim of this study is to investigate mandibular condyle cortication (MCC), articular eminence cortication (AEC) and mandibular cortical index (MCI) according to age and gender on CBCT, and relationship between each other.

METHODS

CBCT scans of 520 patients (312 male and 208 female, age range 7-84) were retrospectively investigated to evaluate MCC, AEC and MCI. MCC and AEC were examined in sagittal section and MCI in panoramic reformatted image. MCC and AEC were classified as Type I, Type II and Type III according to density difference between the cortical bone enclosing condyle and articular eminence. Categorical variables were tested by Chi square.

RESULTS

When MCC, AEC and MCI were compared, a significant relationship was detected (p < 0.05). According to age, there was a significant difference between MCC, MCI and AEC types with each other (p < 0.05). No significant discrepancy was found between gender and MCC, AEC and MCI (p > 0.05).

CONCLUSIONS

This study evaluated the distribution of MCC, AEC, MCI according to age and gender and detected that these cortications were correlated. This result may be caused by anatomical proximity bone components and functional stimuli. Knowledge of these cortications can be important for accurate diagnosis of TMJ disorders and may also be helpful for prediction of osteoporotic changes.

Tissue Engineering for the Temporomandibular Joint

Tissue engineering potentially offers new treatments for disorders of the temporomandibular joint which frequently afflict patients. Damage or disease in this area adversely affects masticatory function and speaking, reducing patients' quality of life. Effective treatment options for patients suffering from severe temporomandibular joint disorders are in high demand because surgical options are restricted to removal of damaged tissue or complete replacement of the joint with prosthetics. Tissue engineering approaches for the temporomandibular joint are a promising alternative to the limited clinical treatment options. However, tissue engineering is still a developing field and only in its formative years for the temporomandibular joint. This review outlines the anatomical and physiological characteristics of the temporomandibular joint, clinical management of temporomandibular joint disorder, and current perspectives in the tissue engineering approach for the temporomandibular joint disorder. The tissue engineering perspectives have been categorized according to the primary structures of the temporomandibular joint: the disc, the mandibular condyle, and the glenoid fossa. In each section, contemporary approaches in cellularization, growth factor selection, and scaffold fabrication strategies are reviewed in detail along with their achievements and challenges.

Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: A review

Recently, the fabrication methods of orthopedic implants and devices have been greatly developed. Additive manufacturing technology allows the production of complex structures with bio-mimicry features, and has the potential to overcome the limitations of conventional fabrication methods. This review explores open-cellular structural design for porous metal implant applications, in relation to the mechanical properties, biocompatibility, and biodegradability. Several types of additive manufacturing techniques including selective laser sintering, selective laser melting, and electron beam melting, are discussed for different applications. Additive manufacturing through powder bed fusion shows great potential for the fabrication of high-quality porous metal implants. However, the powder bed fusion technique still faces two major challenges: it is high cost and time-consuming. In addition, triply periodic minimal surface (TPMS) structures are also analyzed in this paper, targeting the design of metal implants with an enhanced biomorphic environment.

•

Orthopedic implants should exhibit biocompatibility and biomechanical compatibility.

•

The elastic modulus of an implant should closely match that of natural bone.

•

TPMS structures possess excellent biomimicry in supporting cell activities.

•

AM technology allows the production of bone implant with biomimicry features.

Osteoconductive 3D porous composite scaffold from regenerated cellulose and cuttlebone-derived hydroxyapatite

Recently, usage of marine-derived materials in biomedical field has come into prominence due to their promising characteristics such as biocompatibility, low immunogenicity and wide accessibility. Among these marine sources, cuttlebone has been used as a valuable component with its trace elemental composition in traditional medicine. Recent studies have focused on the use of cuttlebone as a bioactive agent for tissue engineering applications. In this study, hydroxyapatite particles were obtained by hydrothermal synthesis of cuttlebone and incorporated to cellulose scaffolds to fabricate an osteoconductive composite scaffold for bone regeneration. Elemental analysis of raw cuttlebone material from different coastal zones and cuttlebone-derived HAp showed that various macro-, micro- and trace elements - Ca, P, Na, Mg, Cu, Sr, Cl, K, S, Br, Fe and Zn were found in a very similar amount. Moreover, biologically unfavorable heavy metals, such as Ag, Cd, Pb or V, were not detected in any cuttlebone specimen. Carbonated hydroxyapatite particle was further synthesized from cuttlebone microparticles via hydrothermal treatment and used as a mineral filler for the preparation of cellulose-based composite scaffolds. Interconnected highly porous structure of the scaffolds was confirmed by micro-computed tomography. The mean pore size of the scaffolds was 510 µm with a porosity of 85%. The scaffolds were mechanically characterized with a compression test and cuttlebone-derived HAp incorporation enhanced the mechanical properties of cellulose scaffolds. In vitro cell culture studies indicated that MG-63 cells proliferated well on scaffolds. In addition, cuttlebone-derived hydroxyapatite significantly induced the ALP activity and osteocalcin secretion. Besides, HAp incorporation increased the surface mineralization which is the major step for bone tissue regeneration.

Perfusion directed 3D mineral formation within cell-laden hydrogels

Despite the promise of stem cell engineering and the new advances in bioprinting technologies, one of the major challenges in the manufacturing of large scale bone tissue scaffolds is the inability to perfuse nutrients throughout thick constructs. Here, we report a scalable method to create thick, perfusable bone constructs using a combination of cell-laden hydrogels and a 3D printed sacrificial polymer. Osteoblast-like Saos-2 cells were encapsulated within a gelatin methacrylate (GelMA) hydrogel and 3D printed polyvinyl alcohol pipes were used to create perfusable channels. A custom-built bioreactor was used to perfuse osteogenic media directly through the channels in order to induce mineral deposition which was subsequently quantified via micro-CT. Histological staining was used to verify mineral deposition around the perfused channels, while COMSOL modeling was used to simulate oxygen diffusion between adjacent channels. This information was used to design a scaled-up construct containing a 3D array of perfusable channels within cell-laden GelMA. Progressive matrix mineralization was observed by cells surrounding perfused channels as opposed to random mineral deposition in static constructs. Micro-CT confirmed that there was a direct relationship between channel mineralization within perfused constructs and time within the bioreactor. Furthermore, the scalable method presented in this work serves as a model on how large-scale bone tissue replacement constructs could be made using commonly available 3D printers, sacrificial materials, and hydrogels.

Biphasic calcium phosphate scaffolds with controlled pore size distribution prepared by in-situ foaming

In this study, a reproducible method of fabricating hierarchically 3D porous scaffolds with high porosity and pore interconnectivity is reported. The method is based on in-situ foaming of a dispersion of diisocyanate, polyol, water and hydroxyapatite (HA) to form a hard foamed HA/polyurethane composite which after heat treatment provided a bi-phase calcium phosphate scaffold. This technique, combining the advantages of polymer sponge and direct foaming methods, provides a better control over the macrostructure of the scaffold. A modification of the multi-scaled porous macrostructure of scaffolds produced by changing the ratio of input reactants and by sintering temperature was studied. The pore morphology, size, and distribution were characterized using a scanning electron microscope and mercury porosimetry. The pores were open and interconnected with multi-scale (from several nanometres to millimetres) sizes convenient for using in tissue engineering applications. The bioactivity was confirmed by growing an apatite layer on the surfaces after immersion in simulated body fluid. The material was biocompatible, as shown by using normal human adipose tissue-derived stem cells (ASC). When seeded onto the scaffolds, the ASC adhered and remained healthy while maintaining their typical morphology.