A review on microbiological decontamination of fresh produce with nonthermal plasma

Inhibition of Salmonella typhimurium and Listeria monocytogenes in coconut juice by graphene-doped photocatalyst rGO/TiO2

This research used the photocatalyst rGO/TiO2 prepared by hydrothermal method to inhibit the growth of these microorganisms in water and coconut juice. In coconut juice, the initial count of Salmonella typhimurium decreased from 3 × 105 CFU /mL to 6.3 × 104 CFU /mL, and the initial count of L. monocytogenes was reduced from 3 × 105 CFU/mL to 1.2 × 105 CFU/mL. Moreover, the chemical structure characterization rGO/TiO2 showed that the doping of rGO formed a compact composite, enhanced the transfer of photogenerated electrons, and improved the photocatalytic efficiency of TiO2. The active substances ·OH and ·O2- produced by photocatalysis directly destroyed the integrity of bacteria cells, led to leakage of protein and DNA in the cells, and resulted in inactivation of the microorganisms, although Salmonella typhimurium and Listeria monocytogenes have different cell structures. These results would provide a good candidate photocatalyst to resist Salmonella typhimurium and Listeria monocytogenes and promote the development of photocatalysis applications.

Air and argon cold plasma effects on lipolytic enzymes inactivation, physicochemical properties and volatile profiles of lightly-milled rice

This study investigated the effectiveness of cold-plasma treatment using air and argon as input gas on deactivation of lipolytic enzymes in lightly-milled-rice (LMR). The results showed no significant inactivation in lipase and lipoxygenase using air-plasma. However, using argon as input gas, the residual activities of lipase and lipoxygenase were reduced to 64.51 % and 29.15 % of initial levels, respectively. Argon plasma treatment resulted in more substantial augmentation in peak and breakdown viscosities of LMR starch, suggesting an enhancement in palatability of cooked LMR with increased stickiness and decreased hardness. In contrast to the decrease in volatile compounds in LMR following argon plasma treatment, the concentrations of several prevalent aroma compounds, including 1-hexanol, 1-hexanal, and 2-pentylfuran, exhibited significant increments, reaching 1489.70 ng/g, 3312.10 ng/g, and 58.80 ng/g, respectively. These findings suggest the potential for enhancing various facets of the commercial qualities of LMR by utilizing different input gases during plasma treatment.

Degradation of Pesticide Residues in Water, Soil, and Food Products via Cold Plasma Technology

Water, soil, and food products contain pesticide residues. These residues result from excessive pesticides use, motivated by the fact that agricultural productivity can be increased by the use of these pesticides. The accumulation of these residues in the body can cause health problems, leading to food safety concerns. Cold plasma technology has been successfully employed in various applications, such as seed germination, bacterial inactivation, wound disinfection, surface sterilization, and pesticide degradation. In recent years, researchers have increasingly explored the effectiveness of cold plasma technology in the degradation of pesticide residues. Most studies have shown promising outcomes, encouraging further research and scaling-up for commercialization. This review summarizes the use of cold plasma as an emerging technology for pesticide degradation in terms of the plasma system and configuration. It also outlines the key findings in this area. The most frequently adopted plasma systems for each application are identified, and the mechanisms underlying pesticide degradation using cold plasma technology are discussed. The possible factors influencing pesticide degradation efficiency, challenges in research, and future trends are also discussed. This review demonstrates that despite the nascent nature of the technology, the use of cold plasma shows considerable potential in regards to pesticide residue degradation, particularly in food applications.

In-package cold plasma treatment for microbial inactivation in plastic-pouch packaged steamed rice cakes

In-package atmospheric cold plasma (ICP) treatment was investigated as a method to inactivate microorganisms in Korean steamed rice cakes (SRCs) packaged in plastic pouches. The effect against Escherichia coli O157:H7 increased with increasing ICP treatment power and time and using nylon-containing pouches. Moreover, E. coli O157:H7 growth was effectively inhibited at 4 and 25 °C when SRCs were in a pouch filled with an O₂-CO₂ (70 % and 30 %) gas. Under optimal treatment power (30 W), treatment time (4 min), and headspace-to-SRC volume ratio (7:1) conditions, ICP effectively inactivated E. coli O157:H7, Bacillus cereus spores, Penicillium chrysogenum, and indigenous aerobic bacteria, as well as yeast and molds in SRCs packaged with air in the nylon/low density polyethylene pouch by 2.2 ± 0.2 log CFU/g, 1.4 ± 0.2 log spores/g, 2.2 ± 0.3 log spores/g, 1.1 ± 0.2 log CFU/g, and 1.0 ± 0.1 log CFU/g, respectively. Furthermore, post-treatment storage was effective in preventing the growth of E. coli O157:H7 in SRCs at 4 °C and 25 °C when the pouch was filled with N₂-CO₂ (50 % and 50 %) or O₂-CO₂ (70 % and 30 %). Collectively, these findings indicate that ICP treatment effectively decontaminates SRCs and represents a potential non-thermal microbial decontamination technology for SRCs in pouch packaging.

Modelling of Nonthermal Dielectric Barrier Discharge Plasma at Atmospheric Pressure and Role of Produced Reactive Species in Surface Polymer Microbial Purification

A nonthermal atmospheric plasma reactor was used to sterilize polymer surfaces and satisfy safety constraints in a biological medium. A 1D fluid model was developed using COMSOL Multiphysics software^® 5.4 with a helium-oxygen mixture at low temperature for the decontamination of bacteria on polymer surfaces. An analysis of the evolution of the homogeneous dielectric barrier discharge (DBD) was carried out through studying the dynamic behavior of the discharge parameters including the discharge current, the consumed power, the gas gap voltage, and transport charges. In addition, the electrical characteristics of a homogeneous DBD under different operating conditions were studied. The results shown that increasing voltage or frequency caused higher ionization levels and maximum increase of metastable species' density and expanded the sterilization area. On the other hand, it was possible to operate plasma discharges at a low voltage and a high density of plasma using higher values of the secondary emission coefficient or permittivity of the dielectric barrier materials. When the discharge gas pressure increased, the current discharges declined, which indicated a lower sterilization efficiency under high pressure. A short gap width and the admixture of oxygen were needed for sufficient bio-decontamination. Plasma-based pollutant degradation devices could therefore benefit from these results.

Impact of Non-Thermal Technologies on the Quality of Nuts: A Review

Nuts are widely consumed worldwide, mainly due to their characteristic flavor and texture, ease of consumption, and their functional properties. In addition, consumers increasingly demand natural or slightly processed foods with high quality. Consequently, non-thermal treatments are a viable alternative to thermal treatments used to guarantee safety and long shelf life, which produce undesirable changes that affect the sensory quality of nuts. Non-thermal treatments can achieve results similar to those of the traditional (thermal) ones in terms of food safety, while ensuring minimal loss of bioactive compounds and sensory properties, thus obtaining a product as similar as possible to the fresh one. This article focuses on a review of the main non-thermal treatments currently available for nuts (cold plasma, high pressure, irradiation, pulsed electric field, pulsed light, ultrasound and ultraviolet light) in relation to their effects on the quality and safety of nuts. All the treatments studied have shown promise with regard to the inhibition of the main microorganisms affecting nuts (e.g., Aspergillus, Salmonella, and E. coli). Furthermore, by optimizing the treatment, it is possible to maintain the organoleptic and functional properties of these products.

Plasma-generated reactive water mist for disinfection of N95 respirators laden with MS2 and T4 bacteriophage viruses

Due to the shortage of personal protective equipment (PPE) during the COVID-19 pandemic, the interest and demand for sterilization devices to reuse PPE has increased. For reuse of face masks, they must be effectively decontaminated of potential infectious agents without compromising its filtration ability during sterilization. In this study, we utilized an atmospheric pressure pulsed dielectric barrier discharge (DBD), combined with nebulized liquid microdroplets to generate plasma-activated mist (PAM). MS2 and T4 bacteriophages were used to conduct the decontamination tests on two types of N95 respirators. Results showed at least a 2-log reduction of MS2 and T4 on N95 respirators treated in one cycle with 7.8% hydrogen peroxide PAM and at least a 3-log reduction treated in 10% hydrogen peroxide PAM. In addition, it was found that there was no significant degradation in filtration efficiency of N95 respirators (3M 1860 and 1804) treated in 10% hydrogen peroxide PAM found after 20 cycles. In terms of re-useability of masks after treatment as determined, it was shown that the elastic straps of 3M 1804 were fragmented after 20 treatment cycles rendering them unusable, while the straps of 3M 1860 were not negatively affected even after 20 disinfection cycles.

Biofilms as a microbial hazard in the food industry: A scoping review

Biofilms pose a serious public health hazard with a significant economic impact on the food industry. The present scoping review is designed to analyze the literature published during 2001-2020 on biofilm formation of microbes, their detection methods, and association with antimicrobial resistance (if any). The peer-reviewed articles retrieved from 04 electronic databases were assessed using PRISMA-ScR guidelines. From the 978 preliminary search results, a total of 88 publications were included in the study. On analysis, the commonly isolated pathogens were Listeria monocytogenes, Staphylococcus aureus, Salmonella spp., Escherichia coli, Bacillus spp., Vibrio spp., Campylobacter jejuni and Clostridium perfringens. The biofilm-forming ability of microbes was found to be influenced by various factors such as attachment surfaces, temperature, presence of other species, nutrient availability etc. A total of 18 studies characterized the biofilm-forming genes, particularly for S. aureus, Salmonella spp., and E. coli. In most studies, polystyrene plate and/or stainless-steel coupons were used for biofilm formation, and the detection was carried out by crystal violet assays and/or by plate counting method. The strain-specific significant differences in biofilm formation were observed in many studies, and few studies carried out analysis of multi-species biofilms. The association between biofilm formation and antimicrobial resistance wasn't clearly defined. Further, viable but non-culturable (VBNC) form of the foodborne pathogens is posing an unseen (by conventional cultivation techniques) but potent threat food safety. The present review recommends the need for carrying out systematic surveys and risk analysis of biofilms in food chain to highlight the evidence-based public health concerns, especially in regions where microbiological food hazards are quite prevalent.

Emerging Trends for Nonthermal Decontamination of Raw and Processed Meat: Ozonation, High-Hydrostatic Pressure and Cold Plasma

Meat may contain natural, spoilage, and pathogenic microorganisms based on the origin and characteristics of its dietary matrix. Several decontamination substances are used during or after meat processing, which include chlorine, organic acids, inorganic phosphates, benzoates, propionates, bacteriocins, or oxidizers. Unfortunately, traditional decontamination methods are often problematic because of their adverse impact on the quality of the raw carcass or processed meat. The extended shelf-life of foods is a response to the pandemic trend, whereby consumers are more likely to choose durable products that can be stored for a longer period between visits to food stores. This includes changing purchasing habits from “just in time” products “for now” to “just in case” products, a trend that will not fade away with the end of the pandemic. To address these concerns, novel carcass-decontamination technologies, such as ozone, high-pressure processing and cold atmospheric plasma, together with active and clean label ingredients, have been investigated for their potential applications in the meat industry. Processing parameters, such as exposure time and processing intensity have been evaluated for each type of matrix to achieve the maximum reduction of spoilage microorganism counts without affecting the physicochemical, organoleptic, and functional characteristics of the meat products. Furthermore, combined impact (hurdle concept) was evaluated to enhance the understanding of decontamination efficiency without undesirable changes in the meat products. Most of these technologies are beneficial as they are cost-effective, chemical-free, eco-friendly, easy to use, and can treat foods in sealed packages, preventing the product from post-process contamination. Interestingly, their synergistic combination with other hurdle approaches can help to substitute the use of chemical food preservatives, which is an aspect that is currently quite desirable in the majority of consumers. Nonetheless, some of these techniques are difficult to store, requiring a large capital investment for their installation, while a lack of certification for industrial utilization is also problematic. In addition, most of them suffer from a lack of sufficient data regarding their mode of action for inactivating microorganisms and extending shelf-life stability, necessitating a need for further research in this area.

Recent developments for controlling microbial contamination of nuts

In recent years, the consumption of nuts has shown an increasing trend worldwide. Nuts are an essential part of several countries' economies as an excellent source of nutrients and bioactive compounds. They are contaminated by environmental factors, improper harvesting practices, inadequate packaging procedures, improper storage, and transportation. The longer storage time also leads to the greater chances of contamination from pathogenic fungi. Nuts are infected with Aspergillus species, Penicillium species, Escherichia coli, Salmonella, and Listeria monocytogenes. Therefore, nuts are associated with a high risk of pathogens and mycotoxins, which demand the urgency of using techniques for enhancing microbial safety and shelf-life stability. Many techniques such as ozone, cold plasma, irradiation, radiofrequency have been explored for the decontamination of nuts. These techniques have different efficiencies for reducing the contamination depending on processing parameters, type of pathogen, and conditions of food material. This review provides insight into decontamination technologies for reducing microbial contamination from nuts.

Cold plasma technologies: Their effect on starch properties and industrial scale-up for starchmodification

Native starches have limited applications in the food industry due to their unreactive and insoluble nature. Cold plasma technology, including plasma-activated water (PAW), has been explored to modify starches to enhance their functional, thermal, molecular, morphological, and physicochemical properties. Atmospheric cold plasma and low-pressure plasma systems have been used to alter starches and have proven successful. This review provides an in-depth analysis of the different cold plasma setups employed for starch modifications. The effect of cold plasma technology application on starch characteristics is summarized. We also discussed the potential of plasma-activated water as a novel alternative for starch modification. This review provides information needed for the industrial scale-up of cold plasma technologies as an eco-friendly method of starch modification.

•

Cold plasma technology could be an effective, sustainable alternative for starch modification.

•

The extent of modification of starches from different botanical sources depends on the type of cold plasma technology used.

•

For mainstream adoption of cold plasma modified starches, research on safety and consumer perception must be conducted.

Effects of packaging parameters on the microbial decontamination of Korean steamed rice cakes using in-package atmospheric cold plasma treatment

The effects of packaging materials, package shape, and secondary packaging on the inactivation of indigenous mesophilic aerobic bacteria in Korean steamed rice cakes using in-package atmospheric dielectric barrier discharge cold plasma (ADCP) treatment were investigated. Inactivation of indigenous mesophilic aerobic bacteria by ADCP treatment (21 kV, 3 min) was significantly increased by 0.6 and 0.8 log CFU/g (p < 0.05) from 0.7 ± 0.1 and 0.5 ± 0.1 CFU/g, respectively, when polypropylene (PP) and low-density polyethylene (LDPE) were laminated with nylon, respectively. Secondary packaging lowered the inactivation level by 0.7-0.8 log CFU/g from 1.1 to 1.3 log CFU/g. In-package ADCP treatment did not alter the water vapor permeability, oxygen transmission rate, and tensile properties of PP, LDPE, nylon/PP, and nylon/LDPE. Thus, the results demonstrated that lamination of PP or LDPE with nylon and treatment before secondary packaging may be effective strategies for microbial inactivation by in-package ADCP treatment.

Low-energy electron beam has severe impact on seedling development compared to cold atmospheric pressure plasma

Sprouts are germinated seeds that are often consumed due to their high nutritional content and health benefits. However, the conditions for germination strongly support the proliferation of present bacteria, including foodborne pathogens. Since sprouts are consumed raw or minimally processed, they are frequently linked to cases of food poisoning. Therefore, a seed decontamination method that provides efficient inactivation of microbial pathogens, while maintaining the germination capacity and quality of the seeds is in high demand. This study aimed to investigate and compare seed decontamination by cold atmospheric-pressure plasma and low-energy electron beam with respect to their impact on seed and seedling quality. The results show that both technologies provide great potential for inactivation of microorganisms on seeds, while cold plasma yielded a higher efficiency with 5 log units compared to a maximum of 3 log units after electron beam treatment. Both techniques accelerated seed germination, defined by the percentage of hypocotyl and leaf emergence at 3 days, with short plasma treatment (< 120 s) and all applied doses of electron beam treatment (8-60 kGy). However, even the lowest dose of electron beam treatment at 8 kGy in this study caused root abnormalities in seedlings, suggesting a detrimental effect on the seed tissue. Seeds treated with cold plasma had an eroded seed coat and increased seed wettability compared to electron beam treated seeds. However, these effects cannot explain the increase in the germination capacity of seeds as this was observed for both techniques. Future studies should focus on the investigation of the mechanisms causing accelerated seed germination and root abnormalities by characterizing the molecular and physiological impact of cold plasma and electron beam on seed tissue.

Microbial Inactivation and Quality Preservation of Chicken Breast Salad Using Atmospheric Dielectric Barrier Discharge Cold Plasma Treatment

Microbiological safety of ready-to-eat foods is paramount for consumer acceptability. The effects of in-package atmospheric dielectric barrier discharge cold plasma (ADCP) treatment on the microbiological safety and quality of model chicken salad (CS) were investigated in this study. CS, packaged in a commercial polyethylene terephthalate container, was treated with ADCP at 24 kV for 2 min. The inactivation of indigenous mesophilic bacteria, Salmonella, and Tulane virus in CS; growth of indigenous mesophilic bacteria and Salmonella in CS; and quality of CS during storage at 4 °C were then investigated. ADCP inactivated indigenous mesophilic bacteria, Salmonella, and Tulane virus by 1.2 ± 0.3 log CFU/g, 1.0-1.5 ± 0.2 log CFU/g, and 1.0 ± 0.1 log PFU/g, respectively. Furthermore, it effectively retarded the growth of the microorganisms, while not significantly affecting the color of chicken, romaine lettuce, and carrot, and the antioxidant capacity of all vegetables throughout storage at the tested temperatures (p > 0.05). The color, smell, and appearance of all vegetables evaluated on day 0 were not significantly different in the sensory test, regardless of the treatment (p > 0.05). Collectively, ADCP treatment effectively decontaminates packaged CS without altering its quality-related properties.

Inactivation of Indigenous Microorganisms and Salmonella in Korean Rice Cakes by In-Package Cold Plasma Treatment

The antimicrobial effects of in-package cold plasma (CP) treatment on Korean rice cakes (KRC) were evaluated. The CP treatment (25 kV) inactivated indigenous mesophilic aerobic bacteria by 0.8–1.0 log CFU/g, irrespective of the position of KRC in the package. The addition of a shaking step during CP treatment increased the reduction in microbes by ~1 log CFU/g. The microbial inactivation efficiency increased significantly when the treatment time increased from 1 to 3 min. Microbial inactivation activity was highest for packages containing eight rice cakes. The optimized CP treatment achieved a 2.0 ± 0.1 log CFU/g reduction in indigenous bacteria. In addition, the optimum CP treatment inactivated indigenous yeast and molds and Salmonella in KRC by 1.7 ± 0.1 log CFU/g and 3.9 ± 0.3 log CFU/g, respectively. No significant changes in color and firmness were observed, and the surface temperature of KRC did not exceed 22 °C after CP treatment. Moreover, CP treatment damaged the cellular membrane of Salmonella, mainly by inducing lipid peroxidation. This study demonstrates the potential use of in-package CP treatment for the non-thermal microbial inactivation of KRC.

Effect of dielectric barrier discharge plasma on the degradation of malathion and chlorpyrifos on lettuce

BACKGROUND

Pesticides have been widely used to control pests on agricultural products in China, and large amounts of pesticide residues have caused a serious threat to human health. Thus, developing a high-efficiency pesticide degradation method for fresh vegetables represents a great challenge. The present study investigated the effects of dielectric barrier discharge (DBD) plasma on the degradation of malathion and chlorpyrifos in aqueous solutions and on lettuces.

RESULTS

DBD treatment significantly degraded malathion and chlorpyrifos in water and on lettuce. After cold plasma treatment at 80 kV for 180 s, the degradation efficiency of malathion (0.5 μg mL-1 ) and chlorpyrifos (1.0 μg mL-1 ) in aqueous solutions reached 64.6% and 62.7%, respectively. The degradation intermediates were explored by HPLC-mass spectrometry and the DBD plasma degradation pathways of malathion and chlorpyrifos were proposed. There was no significant damage to the quality of lettuces, including color and chlorophyll content, after plasma treatment. Ascorbic acid decreased significantly during long-term treatment with DBD plasma. To ensure the quality of lettuces during processing, the treatment time was shortened to 120 s. Under this condition, the degradation efficiency of malathion (0.5 mg kg-1 ) and chlorpyrifos (1.0 mg kg-1 ) on lettuces was found to be 53.1% and 51.4%. More importantly, we noted that cold plasma treatment significantly inactivated the microorganisms on lettuces.

CONCLUSION

The results of the present study show that cold plasma is an effective and safe method for the degradation of organic pesticide residues on fresh vegetables at the same time as retaining the original quality. © 2020 Society of Chemical Industry.

Application of plasma activated water for decontamination of alfalfa and mung bean seeds

Microbial contamination of fresh produce is a major public health concern, with the number of associated disease outbreaks increasing in recent years. The consumption of sprouted beans and seeds is of particular concern, as these foodstuffs are generally consumed raw, and are produced in conditions favourable for the growth of zoonotic pathogens, if present in seeds prior to sprouting or in irrigation water. This work aimed to evaluate the activity of plasma activated water (PAW) as a disinfecting agent for alfalfa (Medicago sativa) and mung bean (Vigna radiata) seeds, during seed soaking. Each seed type was inoculated with Escherichia coli O157, E. coli O104, Listeria monocytogenes or Salmonella Montevideo, and treated with PAW for different times. A combination of PAW and ultrasound treatment was also evaluated. The germination and growth rate of both seeds were assessed after PAW treatments. PAW was demonstrated to have disinfecting ability on sprouted seeds, with reductions of up to Log₁₀ 1.67 cfu/g in alfalfa seeds inoculated with E. coli O104, and a reduction of Log₁₀ 1.76 cfu/g for mung bean seeds inoculated with E. coli O157 observed. The germination and growth rate of alfalfa and mung bean sprouts were not affected by the PAW treatments. The combination of a PAW treatment and ultrasound resulted in increased antimicrobial activity, with a reduction of Log₁₀ 3.48 cfu/g of S. Montevideo in mung bean seeds observed. These results demonstrate the potential for PAW to be used for the inactivation of pathogenic microorganisms which may be present on sprouted seeds and beans, thereby providing greater assurance of produce safety.

Advanced Oxidation Process as a Postharvest Decontamination Technology To Improve Microbial Safety of Fresh Produce

Fresh produce is frequently associated with outbreaks of foodborne diseases; thus, there is a need to develop effective intervention technologies and antimicrobial treatments to improve the microbial safety of fresh produce. Washing with chemical sanitizers, commonly used by the industry, is limited in its effectiveness and is viewed as a possible cross-contamination opportunity. This review discuses the advanced oxidation process (AOP), which involves generating highly reactive hydroxyl radicals to inactivate human pathogens. Ionizing irradiation, ultraviolet (UV) light, and cold plasma can be regarded as AOP; however, AOPs employing combinations of UV, H₂O₂, cold plasma, and ozone may be more promising because higher amounts of hydroxyl radicals are produced in comparison to the individual treatments and the combinative AOPs may be more consumer friendly than ionizing irradiation. When applied as a gaseous/aerosolized treatment, AOPs may have advantages over immersion treatments, considering the reactivity of hydroxyl radicals and presence of organic materials in wash water. Gaseous/aerosolized AOPs achieve up to 5 log reductions of pathogenic bacteria on fresh produce compared to reductions of 1-2 logs with aqueous sanitizers. Further research needs to be conducted on specific AOPs before being considered for commercialization, such as reduced formation of undesirable chemical byproducts, impact on quality, and scaled up studies.

Sushi processing: microbiological hazards and the use of emerging technologies

Sushi meal has been adapting to different countries and traditions ever since it was invented. Recently there is a growing popularity of ready-to-eat sushi meals, with new sushi production plants emerging in many countries. This relatively new sushi industry is facing many challenges, one of which is the microbiological hazard related to sushi consumption. The aim of this review was to summarize the most significant aspects with regard to microbiological quality of sushi, reported cases of sushi-related poisoning, as well as the potential of modern innovative and emerging technologies to inhibit microbiological growth. Although there is a limited amount of studies in relation to sushi shelf-life extension, the existing data shows potential of using novel minimal processing technologies to improve the shelf-life and quality of sushi meals. Those technologies include the use of cold plasma, plasma activated water and electrolyzed water, as well as the use of innovative packaging and edible coatings. Based on the collected data, the possible microbiological hazards in the production process of sushi, with possible use of emerging technologies to reduce or eliminate those risks, are also emphasized.

Foodborne Viruses and Innovative Non-Thermal Food-Processing Technologies

In recent years, several foodborne viruses' outbreaks have been recorded worldwide. Μost of the foodborne viruses have a low infection dose, are stable and can persist and survive in foods for a long time without loss of infectivity. The most important foodborne viruses are: human norovirus (HuNoV), human rotavirus (HRV), hepatitis A virus (HAV), hepatitis E virus (HEV), human astrovirus (HAstV), Aichi virus (AiV), sapovirus (SaV), human adenovirus (HAdV) and enterovirus (EV). In recent years, innovative non-thermal food-processing technologies including high-pressure processing (HPP), cold plasma (CP), ultraviolet light (UV), irradiation and pulsed electric field (PEF) for improving the quality and safety of foods, including foods of animal origin, have been under research. This review presents the recent data on foodborne viruses and reviews the innovative non-thermal technologies for the control of the foodborne viruses in foods.

Evaluation of In-Package Atmospheric Dielectric Barrier Discharge Cold Plasma Treatment as an Intervention Technology for Decontaminating Bulk Ready-To-Eat Chicken Breast Cubes in Plastic Containers

This article evaluates the effects of in-package atmospheric dielectric barrier discharge cold plasma (ADCP) treatment on microbial inactivation, nitrate and nitrite contents, oral toxicity, and storage quality of protein-coated boiled chicken breast cubes (CBCs). ADCP treatment at 24 kV for 3 min inactivated natural mesophilic aerobic bacteria, Salmonella, and Tulane virus in CBCs by 0.7 ± 0.2, 1.4 ± 0.1 log CFU/cube, and 1.1 ± 0.2 log PFU/cube, respectively. ADCP treatment did not affect the nitrite content of CBCs (p > 0.05). Furthermore, the hematological and blood biochemical parameters from toxicity tests indicated the toxicological safety of ADCP-treated CBCs. Microbial counts of natural bacteria and Salmonella in ADCP-treated CBCs were lower than the ADCP-untreated CBCs by 0.7–0.9 and 1.4–1.7 log CFU/cube, respectively, throughout post-treatment storage at 4 °C for 21 d. ADCP treatment did not alter the pH, color, total volatile basic nitrogen, lipid oxidation, and tenderness of CBCs during storage at 4 and 24 °C, and did not change the sensory properties of CBCs following a 3 d storage period at 4 °C (p > 0.05). Thus, ADCP treatment has the potential to be applied as a method to increase the microbiological safety of packaged ready-to-eat chicken products, leading to overall toxicological safety.

Non-Thermal Plasma Can Be Used in Disinfection of Scots Pine (Pinus sylvestris L.) Seeds Infected with Fusarium oxysporum

The aim of this study was to use diffuse coplanar surface barrier discharge (DCSBD) non-thermal plasma for the disinfection of pine seed surfaces infected with Fusarium oxysporum spores. Artificially infected seeds of Scots pine (Pinus sylvestris L.) were treated with plasma for the following exposure times: 1 s, 3 s, 5 s, 10 s, 15 s, 20 s, 30 s, and 60 s, and subsequently germinated on agar medium in Petri dishes at room temperature for the estimation of seed germination and disinfection effect of plasma treatment. Results of the treated samples were compared to the control samples, which were prepared as follows: seeds uninfected and non-treated with plasma (first control); seeds infected with F. oxysporum and non-treated with plasma (second control); and seeds infected with F. oxysporum, non-treated with plasma, but sterilized with 30% perhydrol (third control). Obtained results indicate that 3 s plasma treatment was an optimal time to inhibit F. oxysporum growth, and at the same time, increase the seed germination. In addition, our results are the first to show the practical application of non-thermal plasma in disinfecting infected Scots pine seeds and improving their germination. According to the results of this study, non-thermal plasma can serve as a seed surface disinfectant in the regeneration of different pine species.

Describing water treatment process performance: Why average log-reduction can be a misleading statistic

The degree to which a technology used for drinking water treatment physically removes or inactivates pathogenic microorganisms is commonly expressed as a log-reduction (or log-removal) and is of central importance to the provision of microbiologically safe drinking water. Many evaluations of water treatment process performance generate or compile multiple values of microorganism log-reduction, and it is common to report the average of these log-reduction values as a summary statistic. This work provides a cautionary note against misinterpretation and misuse of averaged log-reduction values by mathematically proving that the average of a set of log-reduction values characteristically overstates the average performance of which the set of log-reduction values is believed to be representative. This has two important consequences for drinking water and food safety as well as other applications of log-reduction: 1) a technology with higher average log-reduction does not necessarily have higher average performance, and 2) risk analyses using averaged log-reduction values as point estimates of treatment efficiency will underestimate average risk-sometimes by well over an order of magnitude. When analyzing a set of log-reduction values, a summary statistic called the effective log-reduction (which averages reduction or passage rates and expresses this as a log-reduction) provides a better representation of average performance of a treatment technology.

Unified Classification of Bacterial Colonies on Different Agar Media Based on Hyperspectral Imaging and Machine Learning

A universal method by considering different types of culture media can enable convenient classification of bacterial species. The study combined hyperspectral technology and versatile chemometric algorithms to achieve the rapid and non-destructive classification of three kinds of bacterial colonies (Escherichia coli, Staphylococcus aureus and Salmonella) cultured on three kinds of agar media (Luria–Bertani agar (LA), plate count agar (PA) and tryptone soy agar (TSA)). Based on the extracted spectral data, partial least squares discriminant analysis (PLS-DA) and support vector machine (SVM) were employed to established classification models. The parameters of SVM models were optimized by comparing genetic algorithm (GA), particle swarm optimization (PSO) and grasshopper optimization algorithm (GOA). The best classification model was GOA-SVM, where the overall correct classification rates (OCCRs) for calibration and prediction of the full-wavelength GOA-SVM model were 99.45% and 98.82%, respectively, and the Kappa coefficient for prediction was 0.98. For further investigation, the CARS, SPA and GA wavelength selection methods were used to establish GOA-SVM simplified model, where CARS-GOA-SVM was optimal in model accuracy and stability with the corresponding OCCRs for calibration and prediction and the Kappa coefficients of 99.45%, 98.73% and 0.98, respectively. The above results demonstrated that it was feasible to classify bacterial colonies on different agar media and the unified model provided a continent and accurate way for bacterial classification.

Surface Dielectric Barrier Discharge plasma: a suitable measure against fungal plant pathogens

Fungal diseases seriously affect agricultural production and the food industry. Crop protection is usually achieved by synthetic fungicides, therefore more sustainable and innovative technologies are increasingly required. The atmospheric pressure low-temperature plasma is a novel suitable measure. We report on the effect of plasma treatment on phytopathogenic fungi causing quantitative and qualitative losses of products both in the field and postharvest. We focus our attention on the in vitro direct inhibitory effect of non-contact Surface Dielectric Barrier Discharge on conidia germination of Botrytis cinerea, Monilinia fructicola, Aspergillus carbonarius and Alternaria alternata. A few minutes of treatment was required to completely inactivate the fungi on an artificial medium. Morphological analysis of spores by Scanning Electron Microscopy suggests that the main mechanism is plasma etching due to Reactive Oxygen Species or UV radiation. Spectroscopic analysis of plasma generated in humid air gives the hint that the rotational temperature of gas should not play a relevant role being very close to room temperature. In vivo experiments on artificially inoculated cherry fruits demonstrated that inactivation of fungal spores by the direct inhibitory effect of plasma extend their shelf life. Pre-treatment of fruits before inoculation improve the resistance to infections maybe by activating defense responses in plant tissues.

Plant Disease Control by Non-Thermal Atmospheric-Pressure Plasma

Disease stresses caused by pathogenic microorganisms are increasing, probably because of global warming. Conventional technologies for plant disease control have often revealed their limitations in efficiency, environmental safety, and economic costs. There is high demand for improvements in efficiency and safety. Non-thermal atmospheric-pressure plasma has demonstrated its potential as an alternative tool for efficient and environmentally safe control of plant pathogenic microorganisms in many studies, which are overviewed in this review. Efficient inactivation of phytopathogenic bacterial and fungal cells by various plasma sources under laboratory conditions has been frequently reported. In addition, plasma-treated water shows antimicrobial activity. Plasma and plasma-treated water exhibit a broad spectrum of efficiency in the decontamination and disinfection of plants, fruits, and seeds, indicating that the outcomes of plasma treatment can be significantly influenced by the microenvironments between plasma and plant tissues, such as the surface structures and properties, antioxidant systems, and surface chemistry of plants. More intense studies are required on the efficiency of decontamination and disinfection and underlying mechanisms. Recently, the induction of plant tolerance or resistance to pathogens by plasma (so-called "plasma vaccination") is emerging as a new area of study, with active research ongoing in this field.

Disinfection and Sterilization Using Plasma Technology: Fundamentals and Future Perspectives for Biological Applications

Recent studies have shown that plasma can efficiently inactivate microbial pathogens such as bacteria, fungi, and viruses in addition to degrading toxins. Moreover, this technology is effective at inactivating pathogens on the surface of medical and dental devices, as well as agricultural products. The current practical applications of plasma technology range from sterilizing therapeutic medical devices to improving crop yields, as well as the area of food preservation. This review introduces recent advances and future perspectives in plasma technology, especially in applications related to disinfection and sterilization. We also introduce the latest studies, mainly focusing on the potential applications of plasma technology for the inactivation of microorganisms and the degradation of toxins.

Cold Plasma-Mediated Treatments for Shelf Life Extension of Fresh Produce: A Review of Recent Research Developments

Fresh produce, like fruits and vegetables, are important sources of nutrients and health-promoting compounds. However, incidences of foodborne outbreaks associated with fresh produce often occur; it is thus important to develop and expand decay-control technologies that can not only maintain the quality but can also control the biological hazards in postharvest, processing, and storage to extend their shelf life. It is under such a situation that plasma-mediated treatments have been developed as a novel nonthermal processing tool, offering many advantages and attracting much interest from researchers and the food industry. This review summarizes recent developments of cold plasma technology and associated activated water for shelf life extension of fresh produce. An overview of plasma generation and its physical-chemical properties as well as methods for improving plasma efficiency are first presented. Details of using the technology as a nonthermal agent in inhibiting spoilage and pathogenic microorganisms, inactivating enzymes, and modifying the barrier properties or imparting specific functionalities of packaging materials to extend shelf life of food produce are then reviewed, and the effects of cold plasma-mediated treatment on microstructure and quality attributes of fresh produce are discussed. Future prospects and research gaps of cold plasma are finally elucidated. The review shows that atmospheric plasma-mediated treatments in various gas mixtures can significantly inhibit microorganisms, inactive enzyme, and modify packaging materials, leading to shelf life extension of fresh produce. The quality attributes of treated produce are not compromised but improved. Therefore, plasma-mediated treatment has great potential and values for its application in the food industry.

The State of Research on Antimicrobial Activity of Cold Plasma

Microbiological contamination is a big challenge to the food industry, medicine, agriculture, and environmental protection. For this reason, scientists are constantly looking for alternative methods of decontamination, which ensure the effective elimination of unwanted biological agents. Cold plasma is a new technology, which due to its unique physical and chemical properties becomes a point of interest to a growing group of researchers. The previously conducted experiments confirm its effective action, e.g. in the disinfection of skin wounds, air, and sewage treatment, as well as in food preservation and decontamination. The reactive compounds present in the plasma: high-energy electrons, ionized atoms and molecules, and UV photons are the key factors that cause an effective reduction in the number of microorganisms. The mechanism and effectiveness of the cold plasma are complex and depend on the process parameters, environmental factors and the type and properties of the microorganisms that are to be killed. This review describes the current state of knowledge regarding the effectiveness of the cold plasma and characterizes its interaction with various groups of microorganisms based on the available literature data.

Safety Control of Whole Berries by Cold Atmospheric Pressure Plasma Processing: A Review

HIGHLIGHTS

CAPP technology has high application potential for decontamination of berries. Impacts of CAPP in aspects of food safety and security still need to be addressed. Optimized treatment parameters need to be investigated for each berry type.