Challenges and opportunities related to the use of chitosan as a food preservative

Chitosan-Surfactant Composite Nanocoatings on Glass and Zinc Surfaces Prepared from Aqueous Solutions

Hydrophobic coatings from chitosan-surfactant composites (ca. 400 nm thick by UV-Vis spectroscopy) for possible corrosion protection were developed on glass and zinc substrates. The surfactants (sodium dodecyl sulfate, SDS or sodium dodecylbenzenesulfonate, and SDBS) were added to the chitosan by two methods: mixing the surfactants with the aqueous chitosan solutions before film deposition or impregnating the deposited chitosan films with surfactants from their aqueous solutions. For the mixed coatings, it was found that the lower surface tension of solutions (40-45 mN/m) corresponded to more hydrophobic (80-90°) coatings in every case. The hydrophobicity of the impregnated coatings was especially significant (88° for SDS and 100° for SDBS). Atomic force microscopy studies revealed a slight increase in roughness (max 1.005) for the most hydrophobic coatings. The accumulation of surfactants in the layer was only significant (0.8-1.0 sulfur atomic %) in the impregnated samples according to X-ray photoelectron spectroscopy. Polarization and electron impedance spectroscopy tests confirmed better barrier properties for these samples (40-50% pseudo-porosity instead of 94%). The degree of swelling in a water vapor atmosphere was significantly lower in the case of the impregnated coatings (ca. 25%) than that of the native ones (ca. 75%), measured by spectroscopic ellipsometry. Accordingly, good barrier layer properties require advantageous bulk properties in addition to surface hydrophobicity.

Eco-friendly and safe alternatives for the valorization of shrimp farming waste

The seafood industry generates waste, including shells, bones, intestines, and wastewater. The discards are nutrient-rich, containing varying concentrations of carotenoids, proteins, chitin, and other minerals. Thus, it is imperative to subject seafood waste, including shrimp waste (SW), to secondary processing and valorization for demineralization and deproteination to retrieve industrially essential compounds. Although several chemical processes are available for SW processing, most of them are inherently ecotoxic. Bioconversion of SW is cost-effective, ecofriendly, and safe. Microbial fermentation and the action of exogenous enzymes are among the significant SW bioconversion processes that transform seafood waste into valuable products. SW is a potential raw material for agrochemicals, microbial culture media, adsorbents, therapeutics, nutraceuticals, and bio-nanomaterials. This review comprehensively elucidates the valorization approaches of SW, addressing the drawbacks of chemically mediated methods for SW treatments. It is a broad overview of the applications associated with nutrient-rich SW, besides highlighting the role of major shrimp-producing countries in exploring SW to achieve safe, ecofriendly, and efficient bio-products.

Chitin Deacetylase from Bacillus aryabhattai TCI-16: Heterologous Expression, Characterization, and Deacetylation Performance

Chitin deacetylase (CDA) removes the acetyl group from the chitin molecule to generate chitosan in a uniform, high-quality deacetylation pattern. Herein, BaCDA was a novel CDA discovered from our previously isolated Bacillus aryabhattai strain TCI-16, which was excavated from mangrove soil. The gene BaCDA was cloned and overexpressed in Escherichia coli BL21 (DE3) to facilitate its subsequent purification. The purified recombinant protein BaCDA was obtained at a concentration of about 1.2 mg/mL after Ni2+ affinity chromatography. The molecular weight of BaCDA was around 28 kDa according to the sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis. In addition, BaCDA exhibited a significant deacetylation effect on colloidal chitin, and the deacetylation degree was measured from the initial 25.69 to 69.23% by Fourier transform infrared (FT-IR) spectroscopy. Scanning electron microscopy (SEM) observation showed that the surface of colloidal chitin after enzymatic digestion was rough, the crystal fibers disappeared, and the chitin structure was loose and porous with grooves. The results of electrospray ionization mass spectrometry (ESI-MS) showed that BaCDA had full-deacetylation activity against (GlcNAc)4. Molecular docking revealed that BaCDA had an open active pocket capable of binding to the GlcNAc unit. This study not only provides a novel enzymatic resource for the green and efficient application of chitin but also helps to deepen the understanding of the catalytic mechanism of CDA.

A hydrogen-bonded curdlan-chitosan/polyvinyl alcohol edible dual functional hydrogel bandage against MRSA promotes wound healing

The most prevalent complication arising from skin injuries is bacterial infection, where pathogenic bacteria proliferate significantly at the wound site, leading to subsequent complications like septic shock and sepsis. Although antibiotics presently effectively manage wound infections caused by common bacteria, the escalating prevalence of antibiotic-resistant strains necessitates urgent novel approaches for addressing such infections. Here, we present CS9P1-RA, a dual functional hydrogel dressing, based on polyvinyl alcohol (PVA) matrix crosslinked through hydrogen bonding. CS9P1-RA combines chitosan (CS), a food-derived antibacterial agent, with the natural compound rosmarinic acid (RA) to specifically target skin injuries caused by MRSA. Computational and molecular biology assays illustrate RA's ability to selectively inhibit the activity of Staphylococcus aureus (S. aureus) serine/threonine phosphatase (Stp1), reducing the S. aureus pathogenicity. CS9P1-RA showcases exceptional antibacterial efficacy (MIC = 1 mg/mL) and demonstrates potency in reducing virulence (IC50 = 7.424 μM on Stp1). Notably, it effectively curbs bacterial growth and accelerates wound healing in the mice model, thereby fulfilling the practical requirements for clinical applications. Moreover, the mechanical properties of CS9P1-RA ensure user comfort during treatment. This work introduces a fresh design paradigm for dressing materials, offering a promising solution for treating skin injuries inflicted by antibiotic-resistant bacterial infections.

An overview of the potential application of chitosan in meat and meat products

Chitosan is considered the second most ubiquitous polysaccharide next to cellulose. It has gained prominence in various industries including biomedicine, textile, pharmaceutical, cosmetic, and notably, the food industry over the last few decades. The polymer's continual attention within the food industry can be attributed to the increasing popularity of greener means of packaging and demand for foods incorporated with natural alternatives instead of synthetic additives. Its antioxidant, antimicrobial, and film-forming abilities reinforced by the polymer's biocompatible, biodegradable, and nontoxic nature have fostered its usage in food packaging and preservation. Microbial activity and lipid oxidation significantly influence the shelf-life of meat, resulting in unfavorable changes in nutritional and sensory properties during storage. In this review, the scientific studies published in recent years regarding potential applications of chitosan in meat products; and their effects on shelf-life extension and sensory properties are discussed. The utilization of chitosan in the form of films, coatings, and additives in meat products has supported the extension of shelf-life while inducing a positive impact on their organoleptic properties. The nature of chitosan and its compatibility with various materials make it an ideal biopolymer to be used in novel arenas of food technology.

Advancements in coating technologies: Unveiling the potential of chitosan for the preservation of fruits and vegetables

Post-harvest losses of fruits and vegetables pose a significant challenge to the agriculture industry worldwide. To address this issue, researchers have turned to natural and eco-friendly solutions such as chitosan coatings. Chitosan, a biopolymer derived from chitin, has gained considerable attention due to its unique properties such as non-toxicity, biodegradability, biocompatibility and potential applications in post-harvest preservation. This review article provides an in-depth analysis of the current state of research on chitosan coatings for the preservation of fruits and vegetables. Moreover, it highlights the advantages of using chitosan coatings, including its antimicrobial, antifungal, and antioxidant properties, as well as its ability to enhance shelf-life and maintain the quality attributes of fresh product. Furthermore, the review discusses the mechanisms by which chitosan interacts with fruits and vegetables, elucidating its antimicrobial activity, modified gas permeability, enhanced physical barrier and induction of host defense responses. It also examines the factors influencing the effectiveness of chitosan coatings, such as concentration, molecular weight, deacetylation degree, pH, temperature, and application methods.

Chitosan-Based Films Containing Rutin for Potential Cosmetic Applications

Chitosan is a polysaccharide with film-forming properties. Such properties are widely used for the preparation of beauty masks and wound-healing materials. In this work, chitosan-based films containing hyaluronic acid and rutin have been researched for potential cosmetic applications. Rutin was added to a chitosan solution in lactic acid, and then thin films were fabricated. The structure of the films was studied using FTIR spectroscopy. Surface properties were studied using an AFM microscope. The release of rutin from chitosan-based film was researched by the HPLC method. The properties of the skin, such as elasticity and moisturization, were studied using the Aramo TS 2 apparatus. It was found that the addition of rutin did not have an influence on the chitosan structure but affected its thermal stability. The roughness of the films was bigger after the addition of rutin to chitosan-based films. Skin elasticity and skin moisturization were somewhat improved after the topical application of the proposed chitosan-rutin mask. The maximum release of rutin was found after 20 min at pH 5.5, related to the pH of normal human skin. The average percentage of release from chitosan-based film containing hyaluronic acid was smaller than from chitosan-based films.

The effect of chitosan coating combined with cold plasma on the quality and safety of pistachio during storage

Pistachios are one of the most important agricultural and export products of Iran. Fresh pistachio fruit has soft skin, is highly perishable, and therefore has a short life after harvesting, which has made traders and consumers have a great desire to increase the shelf life of this product. For this purpose, in this study, the effect of different concentrations of chitosan as an edible coating (0.5 and 1.5% w/v) and the duration of cold plasma treatment (60 and 120 s) were investigated during 180 days of pistachio storage. The effect of treatments on the shelf life of pistachio fruit was evaluated by determining moisture content, color components, peroxide value, total mold and yeast, hardness, aflatoxin content, and sensory evaluations. The results showed that the treatment with 1.5% chitosan coating and 120 s of cold plasma treatment preserved the hardness of the pistachio and the color indices in the best way (p < .05). Also, this treatment had the minimum number of peroxide, aflatoxin, and mold and yeast counts during the storage time. The treatments with chitosan coating and under plasma application did not cause any unpleasant odor or taste during the storage time. In conclusion, according to the results of this research, it was determined that the simultaneous use of chitosan coating and cold plasma treatment can potentially be used as a new approach for commercial applications and the export of fresh pistachios.

The correlation of molecule weight of chitosan oligomers with the corresponding viscosity and antibacterial activity

In order to explore the correlation between the viscosity of chitosan oligomers-acetic solution and its viscosity average molecular weight (M_v), and determine the M_v range with a strong bactericidal effect. A series of chitosan oligomers were obtained by degraded chitosan (728.5 kDa) with dilute acid and chitosan oligomer (101.5 kDa) was characterized by FT-IR, XRD, H NMR and C NMR. The bactericidal effect of chitosan oligomers with different Mv on E. coli, S. aureus and C. albicans was measured by plate counting method. And the bactericidal rate was taken as the evaluation indicator, the optimum conditions were determined by single-factor experiments. The result showed that the molecular structure of chitosan oligomers and original chitosan (728.5 kDa) were similar. The viscosity of the chitosan oligomers in acetic acid solution was positively correlated with the M_v, and the chitosan oligomers with the M_v of 52.5-145.0 kDa had a strong bactericidal performance. In addition, the bactericidal rate of chitosan oligomers on experimental strains was more than 90% when the concentration of 0.5 g/L (bacteria) and 1.0 g/L (fungi), pH6.0, incubation time of 30 min. Thus, chitosan oligomers had a potential application value when the M_v was in the range of 52.5-145.0 kDa.

A comprehensive review of chitosan applications in paper science and technologies

Using environmentally friendly biomaterials in different aspects of human life has been considered extensively. In this respect, different biomaterials have been identified and different applications have been found for them. Currently, chitosan, the well-known derivative of the second most abundant polysaccharide in the nature (i.e., chitin), has been receiving a lot of attention. This unique biomaterial can be defined as a renewable, high cationic charge density, antibacterial, biodegradable, biocompatible, non-toxic biomaterial with high compatibility with cellulose structure, where it can be used in different applications. This review takes a deep and comprehensive look at chitosan and its derivative applications in different aspects of papermaking.

Food-Grade Oleogels: Trends in Analysis, Characterization, and Applicability

Currently, a large number of scientific articles can be found in the research literature in the field focusing on the use of oleogels for food formulation to improve their nutritional properties. The present review focuses on the most representative food-grade oleogels, highlighting current trends in terms of the most suitable methods of analysis and characterization, as well as trends in their application as substitutes for saturated and trans fats in foods. For this purpose, the physicochemical properties, structure, and composition of some oleogelators are primarily discussed, along with the adequacy of oleogel incorporation for use in edible products. Analysis and characterization of oleogels by different methods are important in the formulation of innovative foods, and therefore, this review discusses the most recent published results regarding their microstructure, rheological and textural properties, and oxidative stability. Last but not least, issues related to the sensory properties of oleogel-based foods are discussed, highlighting also the consumer acceptability of some of them.

Characterization of heat-treated chitosan cast films and their antimicrobial activity on the growth of natural flora of pasteurized milk

This research aimed to evaluate the physicochemical and biocidal properties of chitosan films obtained through the solvent casting method using two different molecular weights, and thermally treated for an extended time (3 weeks) at 70 °C under vacuum condition (RH 0 %). The effect of storage time (for 30 and 180 days) under ambient conditions (23 °C and RH 40 %) on the properties of heat-treated cast films and their biocidal effectiveness was also assessed. FTIR-ATR, TGA and XRD of resulting films were analyzed to explore the dependency of antibacterial performance on the alteration in molecular and chemical structure. The results demonstrated that the solubility of treated films at 70 °C was proportionally reduced, resulting from the reduction of protonated amines and an increase in crystallinity. Likewise, increasing storage time led to a significant lowering in the solubilization of cast films. It was found that the solubilized fraction of chitosan cast films is the active fraction with the biocide behavior that can act against bacteria. In addition, the effectiveness of migrated chitosan was examined against the natural flora of pasteurized milk, such as Paenibacillus and Pseudomonas fluorescens. The results showed that cast films obtained from chitosan with lower molecular weight caused a reduction in the total count of viable cells without a significant effect on the properties of milk.

Chitosan Based Materials in Cosmetic Applications: A Review

This review provides a report on the properties and recent advances in the application of chitosan and chitosan-based materials in cosmetics. Chitosan is a polysaccharide that can be obtained from chitin via the deacetylation process. Chitin most commonly is extracted from cell walls in fungi and the exoskeletons of arthropods, such as crustaceans and insects. Chitosan has attracted significant academic interest, as well as the attention of the cosmetic industry, due to its interesting properties, which include being a natural humectant and moisturizer for the skin and a rheology modifier. This review paper covers the structure of chitosan, the sources of chitosan used in the cosmetic industry, and the role played by this polysaccharide in cosmetics. Future aspects regarding applications of chitosan-based materials in cosmetics are also mentioned.

Chitin and Chitosan as Polymers of the Future-Obtaining, Modification, Life Cycle Assessment and Main Directions of Application

Natural polymers are very widespread in the world, which is why it is so important to know about the possibilities of their use. Chitin is the second most abundant reproducible natural polymer in nature; however, it is insoluble in water and basic solvents. Chitin is an unused waste of the food industry, for which there are possibilities of secondary management. The research led to obtaining a soluble, environmentally friendly form of chitin, which has found potential applications in the many fields, e.g., medicine, cosmetics, food and textile industries, agriculture, etc. The deacetylated form of chitin, which is chitosan, has a number of beneficial properties and wide possibilities of modification. Modification possibilities mean that we can obtain chitosan with the desired functional properties, facilitating, for example, the processing of this polymer and expanding the possibilities of its application, also as biomimetic materials. The review contains a rich description of the possibilities of modifying chitin and chitosan and the main directions of their application, and life cycle assessment (LCA)-from the source of the polymer through production materials to various applications with the reduction of waste.

Chitosan as an Outstanding Polysaccharide Improving Health-Commodities of Humans and Environmental Protection

Public health, production and preservation of food, development of environmentally friendly (cosmeto-)textiles and plastics, synthesis processes using green technology, and improvement of water quality, among other domains, can be controlled with the help of chitosan. It has been demonstrated that this biopolymer exhibits advantageous properties, such as biocompatibility, biodegradability, antimicrobial effect, mucoadhesive properties, film-forming capacity, elicitor of plant defenses, coagulant-flocculant ability, synergistic effect and adjuvant along with other substances and materials. In part, its versatility is attributed to the presence of ionizable and reactive primary amino groups that provide strong chemical interactions with small inorganic and organic substances, macromolecules, ions, and cell membranes/walls. Hence, chitosan has been used either to create new materials or to modify the properties of conventional materials applied on an industrial scale. Considering the relevance of strategic topics around the world, this review integrates recent studies and key background information constructed by different researchers designing chitosan-based materials with potential applications in the aforementioned concerns.

Multifunctional dual cross-linked poly (vinyl alcohol)/methacrylate hyaluronic acid/chitooligosaccharide-sinapic acid wound dressing hydrogel

Wound dressing hydrogel with multifunctional properties, including antioxidant and antimicrobial properties and appropriate mechanical, biological, and physical properties is of great interest in wound healing application and it is still a challenge. In the present study, chitooligosaccharides (COS)/ sinapic acid (SA) conjugate (COS-SA) was synthesized using H₂O₂-induced grafting polymerization, and photo cross-linkable hyaluronic acid was synthesized using methacrilation (HAMA). The synthesis of COS-SA and HAMA was confirmed by Fourier-transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, ultraviolet spectroscopy, and polyphenol assay. Subsequently, we developed duel cross-linked polyvinyl alcohol (PVA)/HAMA composite hydrogel encapsulated with COS-SA as an antioxidant and antimicrobial dressing for full-thickness wound healing application. The chemical, physical, mechanical, antioxidant, antimicrobial, in vitro biocompatibility, and in vivo wound healing properties of hydrogels were subsequently investigated. The results showed that the fabricated composite hydrogel had a uniform porous architecture, excellent fluid absorbability, and appropriate mechanical stability. The introduction of COSs-SA conjugate remarkably enhanced the in vitro biocompatibility, antioxidant, and antimicrobial properties of the hydrogel, leading to the significant promotion of in vivo full-thickness wound closure, re-epithelization, granulation tissue formation, and collagen deposition indicating that COSs-SA incorporated PVA/HAMA hydrogel wound dressing has significant potential for chronic wound healing application.

Characterization of Salmonella endolysin XFII produced by recombinant Escherichia coli and its application combined with chitosan in lysing Gram-negative bacteria

Background

 Salmonella is a common foodborne pathogen, which can cause intestinal diseases. In the last decades, the overuse of antibiotics has led to a pandemic of drug-resistant bacterial infections. To tackle the burden of antimicrobial resistant pathogens, it is necessary to develop new antimicrobial drugs with novel modes of action. However, the research and development of antibiotics has encountered bottlenecks, scientific hurdles in the development process, as well as safety and cost challenges. Phages and phage endolysins are promising antibacterial agents that can be used as an alternative to antibiotics. In this context, the expression of endolysin derived from different phages through microbial cells as a chassis seems to be an attractive strategy.

Results

 In this study, a new endolysin from the Salmonella phage XFII-1, named XFII, was screened and obtained. The endolysin yield exceeded 100 mg/mL by heterologous expression from E. coli BL21 and short induction. The endolysin XFII exhibited high bactericidal activity at a concentration of 0.5 μg/mL and reduced the OD₆₀₀ nm of EDTA-pretreated E. coli JM109 from 0.8 to 0.2 within 5 min. XFII exhibited good thermo-resistance, as it was very stable at different temperatures from 20 to 80℃. Its bactericidal activity could keep constant at 4 °C for 175 days. In addition, the endolysin was able to exert lytic activity in eutrophic conditions, including LB medium and rabbit serum, and the lytic activity was even increased by 13.8% in 10% serum matrices. XFII also showed bactericidal activity against many Gram-negative bacteria, including Salmonella, E. coli, Acinetobacter baumannii, and Klebsiella pneumoniae. Surprisingly, the combination of endolysin XFII and chitosan showed a strong synergy in lysing E. coli and Salmonella without EDTA-pretreatment, and the OD₆₀₀ nm of E. coli decreased from 0.88 to 0.58 within 10 min.

Conclusions

The novel globular endolysin XFII was screened and successfully expressed in E. coli BL21. Endolysin XFII exhibits a broad lysis spectrum, a rapid and strong bactericidal activity, good stability at high temperatures and under eutrophic conditions. Combined with chitosan, XFII could spontaneously lyse Gram-negative bacteria without pretreatment. This work presented the first characterization of combining endolysin and chitosan in spontaneously lysing Gram-negative bacteria in vitro.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-022-01894-2.

Antioxidant and Antimicrobial Biofoil Based on Chitosan and Japanese Knotweed (Fallopia japonica, Houtt.) Rhizome Bark Extract

A 70% ethanol_(aq) extract of the rhizome bark of the invasive alien plant species Japanese knotweed (JKRB) with potent (in the range of vitamin C) and stable antioxidant activity was incorporated in 1% w/v into a chitosan biofoil, which was then characterized on a lab-scale. The 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay confirmed the antioxidant activity of the JKRB biofoil upon contact with the food simulants A, B, C, and D1 (measured half-maximal inhibitory concentrations—IC₅₀) and supported the Folin–Ciocalteu assay result. The migration of the antioxidant marker, (−)-epicatechin, into all food simulants (A, B, C, D1, D2, and E) was quantified using liquid chromatography hyphenated to mass spectrometry (LC-MS). Calculations showed that 1 cm² of JKRB biofoil provided antioxidant activity to ~0.5 L of liquid food upon 1 h of contact. The JKRB biofoil demonstrated antimicrobial activity against Gram-positive bacteria. The incorporation of JKRB into the chitosan biofoil resulted in improved tensile strength from 0.75 MPa to 1.81 MPa, while elongation decreased to 28%. JKRB biofoil’s lower moisture content compared to chitosan biofoil was attributed to the formation of hydrogen bonds between chitosan biofoil and JKRB compounds, further confirmed with attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). The JKRB biofoil completely degraded in compost in 11 days. The future upscaled production of JKRB biofoil from biowastes for active packaging may support the fights against plastic waste, food waste, and the invasiveness of Japanese knotweed, while greatly contributing to the so-called ‘zero-waste’ strategy and the reduction in greenhouse gas emissions.

Combined Effect of Chitosan Coating and Laurel Essential Oil (Laurus nobilis) on the Microbiological, Chemical, and Sensory Attributes of Water Buffalo Meat

The combined effect of chitosan coating (CHI) and laurel essential oil (LEO) on the shelf-life extension of water buffalo meat stored under aerobic packaging conditions at 4 °C was investigated. Microbiological, physicochemical, and sensory attributes were monitored over an 18-day storage period. Microbiological data indicated that the (CHI) coating along with (LEO) was the most efficient among treatments in reducing populations of bacteria by 3.2 log cfu/g on day 6 of storage (p < 0.05). pH values of meat varied between 6.04 and 6.21, while thiobarbituric acid (TBA) values were equal to or less than 2.12 mg malondialdehyde/kg throughout storage. The colour parameter L* and a* values decreased, while b* values increased during storage (p < 0.05). Taste proved to be a more sensitive sensory attribute than odour. Based on sensory and microbiological data, product shelf life was approximately 5−6 days for control samples, 7−8 days for samples treated with (LEO), 12 days for samples treated with (CHI), and 13−14 days for samples treated with (CHI + LEO).

Combination of Chitosan, Tea Polyphenols, and Nisin on the Bacterial Inhibition and Quality Maintenance of Plant-Based Meat

Plant-based meat products have gained attention in the food industry and with consumers. Plant-based meat products primarily comprise plant proteins and are rich in nutrients. However, the products are highly susceptible to bacterial contamination during storage. Biological preservatives are easily degradable alternatives to chemical preservatives and can preserve different kinds of food. In order to investigate the preservation properties of chitosan (CS), tea polyphenols (TPs), and nisin treatments on plant-based meats, the sensory evaluation, color difference, pH, TBARS, and the total plate count of E. coli, S. aureus, and Salmonella, indicators of the biological preservative-treated plant-based meat, were determined in this study. The experiment involved blank control- and biological preservative-treated samples. We found that the total microbial count exceeded the national standard provisions in the control samples stored for 14 days. The colors, tissue structures, and flavors of plant-based meat have gradually deteriorated, with the sensory score dropping from 90 to 52. The sample had a loose tissue structure and an obvious sour taste. However, the shelf life of the plant-based meat samples treated with different combinations of the biological preservatives increased compared to the shelf life of the control samples. After 56 d of storage, 1% chitosan, 2.5% tea polyphenols, and 0.04% nisin sensory reduction to 56, the total number of colonies and S. aureus were 4.91 and 2.95 lg CFU/g, approaching the national standard threshold; E. coli was 2 lg CFU/g, reaching the national standard threshold. Thus, the samples treated with 1% chitosan, 2.5% tea polyphenols, and 0.04% nisin had the longest shelf life (56 days) among all experimental groups. Hence, this study reveals that a combination of biological preservatives may be a non-toxic alternative for the efficient preservation of plant-based meat products.

Analysis of Alternative Shelf Life-Extending Protocols and Their Effect on the Preservation of Seafood Products

Seafood is essential to a healthy and varied diet due to its highly nutritious characteristics. However, seafood products are highly perishable, which results in financial losses and quality concerns for consumers and the industry. Due to changes in consumer concerns, demand for healthy products has increased. New trends focusing on reducing synthetic preservatives require innovation and the application of additional or alternative strategies to extend the shelf life of this type of product. Currently, refrigeration and freezing storage are the most common methods for fish preservation. However, refrigeration alone cannot provide long shelf-life periods for fish, and freezing worsens sensorial characteristics and consumer interest. Therefore, the need to preserve seafood for long periods without exposing it to freezing temperatures exists. This review focuses on the application of other approaches to seafood products, such as biodegradable films and coating technology; superchilling; irradiation; high-pressure processing; hyperbaric storage; and biopreservation with lactic acid bacteria, bacteriocins, or bacteriophages. The efficiency of these techniques is discussed based on their impact on microbiological quality, sensorial degradation, and overall preservation of the product’s nutritional properties. Although these techniques are already known, their use in the industrial processing of seafood is not widespread. Thus, the novelty of this review is the aggregation of recent studies on shelf life extension approaches, which provide useful information for the selection of the most appropriate technology and procedures and industrial innovation. Despite the fact that all techniques inhibit or delay bacterial proliferation and product decay, an undesirable sensory impact may occur depending on the treatment conditions. Although no technique appears to replace refrigeration, the implementation of additional treatments in the seafood processing operation could reduce the need for freezing, extending the shelf life of fresh unfrozen products.

Enzymatic modification of native chitin and chitin oligosaccharides by an alkaline chitin deacetylase from Microbacterium esteraromaticum MCDA02

In this study, chitin deacetylase from Microbacterium esteraromaticum MCDA02 (MeCDA) was purified by ammonium sulfate precipitation, anion exchange chromatography, and superdex column chromatography. The molecular weight of purified MeCDA was approximately 26 kDa. The optimum pH and temperature of purified MeCDA were 8.0 and 30 °C, respectively. The enzyme activity is enhanced by metal ions K⁺ and Sr⁺ and inhibited by Co²⁺, Cd²⁺, and EDTA. The degree of deacetylation through enzymatic modification of MeCDA was removed an average of 32.75% of the acetyl groups for ɑ-chitin by acid-base titration. Meanwhile, MeCDA can catalyze the hydrolytic cleavage of the acetamido bond in GlcNAc units within chitin oligomers and polymers. Hence, the MeCDA is a potent chitin decomposer to catalyze chitin and chitin oligosaccharides deacetylation to prepare chitosan and chitosan oligosaccharide. This is a value-added utilization of chitin based biological resources.

Emerging chitosan-essential oil films and coatings for food preservation - A review of advances and applications

With the rising demand for fresh and ready-to-eat foods, antimicrobial packaging has been developed to control or prevent microbial growth as well as maintain food quality and safety. Chitosan is an advanced biomaterial for antimicrobial packaging to meet the growing needs of safe and biodegradable packaging. The application of natural essential oils as antimicrobial agents effectively controls the growth of spoilage and pathogenic microbes. Thus, chitosan edible coatings and films incorporated with essential oils have expanded the general applications of antimicrobial packaging in food products. This review summarized the effect of essential oils on modifying the physicochemical characteristics of chitosan-based films. Notably, the antimicrobial efficacy of the developed composite films or coatings was highlighted. The advances in the preparation methods and application of chitosan films were also discussed. Broadly, this review will promote the potential applications of chitosan-essential oils composite films or coatings in antimicrobial packaging for food preservation.

Biomaterials from the sea: Future building blocks for biomedical applications

Marine resources have tremendous potential for developing high-value biomaterials. The last decade has seen an increasing number of biomaterials that originate from marine organisms. This field is rapidly evolving. Marine biomaterials experience several periods of discovery and development ranging from coralline bone graft to polysaccharide-based biomaterials. The latter are represented by chitin and chitosan, marine-derived collagen, and composites of different organisms of marine origin. The diversity of marine natural products, their properties and applications are discussed thoroughly in the present review. These materials are easily available and possess excellent biocompatibility, biodegradability and potent bioactive characteristics. Important applications of marine biomaterials include medical applications, antimicrobial agents, drug delivery agents, anticoagulants, rehabilitation of diseases such as cardiovascular diseases, bone diseases and diabetes, as well as comestible, cosmetic and industrial applications.

Edible Films on Meat and Meat Products

In 2018, the worldwide consumption of meat was 346.14 million tonnes, and this is expected to increase in the future. As meat consumption increases, the use of packaging materials is expected to increase along with it. Petrochemical packaging materials which are widely used in the meat processing industry, take a long time to regenerate and biodegrade, thus they adversely affect the environment. Therefore, the necessity for the development of eco-friendly packaging materials for meat processing, which are easily degradable and recyclable, came to the fore. The objective of this review is to describe the application of natural compound-derived edible films with their antioxidant and antibacterial activities in meat and meat products. For several decades, polysaccharides (cellulose, starch, pectin, gum, alginate, carrageenan and chitosan), proteins (milk, collagen and isolated soy protein) and lipids (essential oil, waxes, emulsifiers, plasticizers and resins) were studied as basic materials for edible films to reduce plastic packaging. There are still high consumer demands for eco-friendly alternatives to petrochemical-based plastic packaging, and edible films can be used in a variety of ways in meat processing. More efforts to enhance the physiological and functional properties of edible films are needed for commercial application to meat and meat products.

Recent developments of natural antimicrobials and antioxidants on fish and fishery food products

Fish and fishery products (FFP) are highly perishable due to their high nutritional value and moisture content. The spoilage is mainly caused by microorganisms and chemical reactions, especially lipid oxidation, leading to losses in quality and market value. Microbiological and lipid deteriorations of fishery-derived products directly lower their nutritive value and pose the risk of toxicity for human health. Increasing demand for safe FFP brings about the preservation using additives from natural origins without chemical additives due to their safety and strict regulation. Antimicrobials and antioxidants from natural sources have exhibited an excellent control over the growth of microorganisms causing fish spoilage via different mechanisms. They also play a major role in retarding lipid oxidation by acting at various stages of oxidation. Antimicrobials and antioxidants from natural sources are usually regarded as safe with no detrimental effects on the quality attributes of FFP. This review provides recent literature on the different antioxidant and antimicrobial agents from natural sources, focusing on microbial and oxidative spoilage mechanisms, their inhibition system, and their applications to retard spoilage, maintain safety, and extend the shelf life of FFP. Their applications and benefits have been revisited.

Improving the Quality and Safety of Fresh Camel Meat Contaminated with Campylobacter jejuni Using Citrox, Chitosan, and Vacuum Packaging to Extend Shelf Life

Simple Summary

This study aimed to investigate the influence of using 1% or 2% Citrox alone or in combination with 1% chitosan on the survival of Campylobacter jejuni in camel meat slices vacuum-packed and stored at 4 or 10 °C for 30 days. The shelf life of camel meat was 30 days longer using 1% or 2% Citrox in combination with 1% chitosan than when using Citrox alone. The reductions ranged from 4.0 to 3.5 logarithmic cycles during the storage period at both 4 and 10 °C. The quality of camel meat treated with Citrox plus chitosan was also better than that of the control meat and of meat treated with 0.85% NaCl.

Abstract

Camel meat is one of the most consumed meats in Arab countries. The use of natural antimicrobial agents to extend the shelf life of fresh camel meat, control Campylobacter jejuni contamination, and preserve meat quality is preferred. In this study, we determined the antimicrobial effects of using 1% or 2% Citrox alone or in combination with 1% chitosan on the survival of C. jejuni in vitro and on camel meat samples during storage at 4 or 10 °C for 30 days in vacuum packaging. We determined the total viable count (TVC (cfu/g)), total volatile base nitrogen (TVB-N) content, and pH of the treated camel meat samples every three days during storage. The shelf lives of camel meat samples treated with 2% Citrox alone or in combination with 1% chitosan were longer than those of camel meat samples treated with 1% Citrox alone or in combination with 1% chitosan at both the 4 and 10 °C storage temperatures, with TVCs of <100 cfu/g after the first ten days and six days of storage at 4 and 10 °C, respectively. The addition of Citrox (1% and 2%) and 1% chitosan to camel meat samples and the application of vacuum storage were more effective than using Citrox (1% and 2%) alone and led to a reduction in C. jejuni in approximately 4.0 and 3.5 log cycles at 4 and 10 °C, respectively. The experimental results demonstrated that using a Citrox-chitosan combination improved the quality of camel meat and enhanced the long-term preservation of fresh meat for up to or more than 30 days at 4 °C.

Biosynthesis and characterization of deuterated chitosan in filamentous fungus and yeast

Deuterated chitosan was produced from the filamentous fungus Rhizopus oryzae, cultivated with deuterated glucose in H₂O medium, without the need for conventional chemical deacetylation. After extraction and purification, the chemical composition and structure were determined by Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), and small-angle neutron scattering (SANS). ¹³C NMR experiments provided additional information about the position of the deuterons in the glucoseamine backbone. The NMR spectra indicated that the deuterium incorporation at the non-exchangeable hydrogen positions of the aminoglucopyranosyl ring in the C3 - C5 positions was at least 60-80 %. However, the C2 position was deuterated at a much lower level (6%). Also, SANS showed that the structure of deuterated chitosan was very similar compared to the non-deuterated counterpart. The most abundant radii of the protiated and deuterated chitosan fibers were 54 Å and 60 Å, respectively, but there is a broader distribution of fiber radii in the protiated chitosan sample. The highly deuterated, soluble fungal chitosan described here can be used as a model material for studying chitosan-enzyme complexes for future neutron scattering studies. Because the physical behavior of non-deuterated fungal chitosan mimicked that of shrimp shell chitosan, the methods presented here represent a new approach to producing a high quality deuterated non-animal-derived aminopolysaccharide for studying the structure-function association of biocomposite materials in drug delivery, tissue engineering and other bioactive chitosan-based composites.

Chitosan and Derivatives: Bioactivities and Application in Foods

Chitosan is a biodegradable, biocompatible, and nontoxic aminopolysaccharide. This review summarizes and discusses the structural modifications, including substitution, grafting copolymerization, cross-linking, and hydrolysis, utilized to improve the physicochemical properties and enhance the bioactivity and functionality of chitosan and related materials. This manuscript also reviews the current progress and potential of chitosan and its derivatives in body-weight management and antihyperlipidemic, antihyperglycemic, antihypertensive, antimicrobial antioxidant, anti-inflammatory, and immunostimulatory activities as well as their ability to interact with gut microbiota. In addition, the potential of chitosan and its derivatives as functional ingredients in food systems, such as film and coating materials, and delivery systems is discussed. This manuscript aims to provide up-to-date information to stimulate future discussion and research to promote the value-added utilization of chitosan in improving the safety, quality, nutritional value and health benefits, and sustainability of our food system while reducing the environmental hazards.

Functional properties of chitosan derivatives obtained through Maillard reaction: A novel promising food preservative

This review provides an insight about the functional properties of chitosan obtained through Maillard reaction to enhance the shelf life and food quality. Maillard reaction is a promising and safe method to obtain commercial water-soluble chitosan's through Schiff base linkage and Amadori or Heyns rearrangement. Likewise, chitosan derivatives exert an enhanced antimicrobial, antioxidant, and emulsifying properties due to the development of Maillard reaction products (MRPs) like reductones and melanoidins. Additionally, the application of chitosan-MRPs effectively inhibited the microbial spoilage, reduced lipid oxidative, and extended the shelf life and the quality of fresh food products. Therefore, understand the potential of chitosan-MRPs derivatives as a functional biomaterial to improve the postharvest quality and extending the shelf life of food products will scale up its application as a food preservative.

Antimicrobial effect of insect chitosan on Salmonella Typhimurium, Escherichia coli O157:H7 and Listeria monocytogenes survival

The antimicrobial capability of chitosan from Tenebrio molitor as compared with chitosan from crustacean (Penaeus monodon) on different pathogenic microorganisms of concern in food safety was studied. The antimicrobial effect was tested at pH 5 and pH 6.2 and at two different initial concentrations (10³ or 10⁶ CFU/mL). Results indicated that chitosan from both sources have antimicrobial activity, although the effect depended on the microorganism considered (Salmonella Typhimurium, Listeria monocytogenes and Escherichia coli O157:H7). Our results indicated that Salmonella was the most resistant bacteria, and that chitosan from insect was less active than chitosan from crustacean, especially against Salmonella. Another important factor on antimicrobial activity was the pH of the sample. When chitosan was added to a solution with a pH of 6.2 it was more active against Listeria and Escherichia coli, than at pH 5.00. Besides, the effect of chitosan appears to decrease with the incubation time, since some increases in counts were observed on E. coli and Salmonella after the 24 and 49 hours of incubation.

Use of Turkey Meat Affected by White Striping Myopathy for the Development of Low-Fat Cooked Sausage Enriched with Chitosan

The main objective of this research was the development of a healthy meat product from turkey meat with white striping myopathy. The effect of adding different proportions of chitosan on the qualitative characteristics, sensory acceptance, and stability of cooked sausages during storage was studied. Three treatments were elaborated (control, 1.5% chitosan, and 3% chitosan), stored for 56 days, and characterized in terms of chemical composition, texture profile analysis, drip and pressure loss analysis, and sensory analysis (after processing; day 0). In the different storage periods (0 and 56 days), the pH value, color, thiobarbituric acid reactive substances (TBARS), and volatile compounds were evaluated. The results showed that the moisture content, lipids, proteins, and weight loss decreased (p < 0.05) and the ash content increased (p < 0.05) with the addition of chitosan. Similarly, the values of texture parameters (hardness, cohesiveness, gumminess, and chewiness) were higher in the sausages reformulated with chitosan than in control samples. The addition of chitosan increased the pH and yellowness (b*) values and reduced (p < 0.05) redness (a*) and lightness (L*) values. The b* values (only in reformulated sausages) and pH increased during storage, while a* showed a significant reduction after 56 storage days. Lipid oxidation (TBARS) was kept below the limits of quantification in all samples and both after processing and 56 storage days. However, when quantifying the lipid-derived volatiles, a clear antioxidant activity of chitosan was observed, which limits the release of these compounds, mainly aldehydes (hexanal and nonanal). Finally, the sensory analysis indicated that, although chitosan treatments received the lowest scores for all attributes, the reformulated samples did not differ from control sausages. Therefore, sausage containing chitosan may represent an interesting alternative for adding value to turkey meats affected by white striping myopathy and, at the same time, develop into a healthy and functional meat product increasing the proportion of fibers in one’s diet.

Intestinal Population in Host with Metabolic Syndrome during Administration of Chitosan and Its Derivatives

Chitosan and its derivatives can alleviate metabolic syndrome by different regulation mechanisms, phosphorylation of AMPK (AMP-activated kinase) and Akt (also known as protein kinase B), suppression of PPAR-γ (peroxisome proliferator-activated receptor-γ) and SREBP-1c (sterol regulatory element–binding proteins), and translocation of GLUT4 (glucose transporter-4), and also the downregulation of fatty-acid-transport proteins, fatty-acid-binding proteins, fatty acid synthetase (FAS), acetyl-CoA carboxylase (acetyl coenzyme A carboxylase), and HMG-CoA reductase (hydroxy methylglutaryl coenzyme A reductase). The improved microbial profiles in the gastrointestinal tract were positively correlated with the improved glucose and lipid profiles in hosts with metabolic syndrome. Hence, this review will summarize the current literature illustrating positive correlations between the alleviated conditions in metabolic syndrome hosts and the normalized gut microbiota in hosts with metabolic syndrome after treatment with chitosan and its derivatives, implying that the possibility of chitosan and its derivatives to serve as therapeutic application will be consolidated. Chitosan has been shown to modulate cardiometabolic symptoms (e.g., lipid and glycemic levels, blood pressure) as well as gut microbiota. However, the literature that summarizes the relationship between such metabolic modulation of chitosan and prebiotic-like effects is limited. This review will discuss the connection among their structures, biological properties, and prebiotic effects for the treatment of metabolic syndrome. Our hope is that future researchers will consider the prebiotic effects as significant contributors to the mitigation of metabolic syndrome.

Reduction in Spoilage Microbiota and Cyclopiazonic Acid Mycotoxin with Chestnut Extract Enriched Chitosan Packaging: Stability of Inoculated Gouda Cheese

Active chitosan-based films, blended with fibrous chestnut (Castanea sativa Mill.) tannin-rich extract were used to pack Gouda cheese that has been contaminated with spoilage microflora Pseudomonas fluorescens, Escherichia coli, and fungi Penicillium commune. A comprehensive experimental plan including active chitosan-based films with (i) chestnut extract (CE), (ii) tannic acid (TA), and (iii) without additives was applied to evaluate the film's effect on induced microbiological spoilage reduction and chemical indices of commercial Gouda cheese during 37 days while stored at 4 °C and 25 °C, respectively. The cheese underwent microbiology analysis and chemical assessments of ultra-high-performance liquid chromatography (UHPLC) (cyclopiazonic acid), pH, and moisture content. The biopackaging used for packing cheese was characterized by mechanical properties before food packaging and analyzed with the same chemical analysis. The cheese microbiology showed that the bacterial counts were most efficiently decreased by the film without additives. However, active films with CE and TA were more effective as they did not break down around the cheese and showed protective properties against mycotoxin, moisture loss, and pH changes. Films themselves, when next to high-fat content food, changed their pH to less acidic, acted as absorbers, and degraded without plant-derived additives.

Chitosan Films Incorporated with Exopolysaccharides from Deep Seawater Alteromonas Sp

Two Alteromonas sp. strains isolated from deep seawater were grown to promote the production of exopolysaccharides (EPS, E611 and E805), which were incorporated into chitosan solutions to develop films. The combination of the major marine polysaccharides (chitosan and the isolated bacterial EPS) resulted in the formation of homogenous, transparent, colorless films, suggesting good compatibility between the two components of the film-forming formulation. With regards to optical properties, the films showed low values of gloss, in the range of 5-10 GU, indicating the formation of non-glossy and rough surfaces. In addition to the film surface, both showed hydrophobic character, with water contact angles higher than 100 º, regardless of EPS addition. Among the two EPS under analysis, chitosan films with E805 showed better mechanical performance, leading to resistant, flexible, easy to handle films.

Control of pathogenic and spoilage bacteria in meat and meat products by high pressure: Challenges and future perspectives

High-pressure processing is among the most widely used nonthermal intervention to reduce pathogenic and spoilage bacteria in meat and meat products. However, resistance of pathogenic bacteria strains in meats at the current maximum commercial equipment of 600 MPa questions the ability of inactivation by its application in meats. Pathogens including Escherichia coli, Listeria, and Salmonelle, and spoilage microbiota including lactic acid bacteria dominate in raw meat, ready-to-eat, and packaged meat products. Improved understanding on the mechanisms of the pressure resistance is needed for optimizing the conditions of pressure treatment to effectively decontaminate harmful bacteria. Effective control of the pressure-resistant pathogens and spoilage organisms in meats can be realized by the combination of high pressure with application of mild temperature and/or other hurdles including antimicrobial agents and/or competitive microbiota. This review summarized applications, mechanisms, and challenges of high pressure on meats from the perspective of microbiology, which are important for improving the understanding and optimizing the conditions of pressure treatment in the future.

Hydrocolloid-Based Coatings with Nanoparticles and Transglutaminase Crosslinker as Innovative Strategy to Produce Healthier Fried Kobbah

This study addresses the effect of coating solutions on fried kobbah. Coating solutions were made of pectin (PEC) and grass pea flour (GPF), treated or not with transglutaminase (TGase) and nanoparticles (NPs)—namely mesoporous silica NPs (MSN) or chitosan NPs (CH–NPs). Acrylamide content (ACR), water, oil content and color of uncoated (control) and coated kobbah were investigated. Zeta potential, Z-average and in vitro digestion experiments were carried out. Zeta potential of CH–NPs was stable from pH 2.0 to pH 6.0 around + 35 mV but decreasing at pH > 6.0. However, the Z-average of CH–NPs increased by increasing the pH. All coating solutions were prepared at pH 6.0. ACR of the coated kobbah with TGase-treated GPF in the presence nanoparticles (MSN or CH–NPs) was reduced by 41.0% and 47.5%, respectively. However, the PEC containing CH–NPs showed the higher reduction of the ACR by 78.0%. Water content was higher in kobbah coated by PEC + CH–NPs solutions, while the oil content was lower. The color analysis indicated that kobbah with lower browning index containing lower ACR. Finally, in vitro digestion studies of both coating solutions and coated kobbah, demonstrated that the coating solutions and kobbah made by means of TGase or nanoparticles were efficiently digested.

Recent advances in polysaccharides stabilized emulsions for encapsulation and delivery of bioactive food ingredients: A review

Many bioactive food ingredients were encapsulated in different forms to improve their stability and bioavailability. Emulsions have showed excellent properties in encapsulation, controlled release, and targeted delivery of bioactives. Polysaccharides are widely available and have different structures with different advantages including non-toxic, easily digested, biocompatible and can keep stable over a wide range of pH and temperatures. In this review, the most common polysaccharides and polysaccharide based complexes as emulsifiers to stabilize emulsions in recent ten years are described. The close relationships between the types and structures of polysaccharides and their emulsifying capacities are discussed. In addition, the absorption and bioavailability of bioactive food components loaded in polysaccharide stabilized emulsions are summarized. The main goal of the review is to emphasize the important roles of polysaccharides in stabilizing emulsions. Moreover, speculations regarded to some issues for the further exploration and possible onward developments of polysaccharides stabilized emulsions are also discussed.

Bioprocessing of shrimp wastes to obtain chitosan and its antimicrobial potential in the context of ethanolic fermentation against bacterial contamination

This study investigated the bioprocessing of shrimp wastes to obtain chitin and its deacetylated product chitosan by a fermentation process mediated by Lactobacillus plantarum. The concentrations of glucose, bacterial inoculum, and shrimp wastes in the Man, Rogosa and Sharpe medium were optimized for the fermentation process performed in shake flasks to achieve the maximum titratable acidity to obtain chitin. The experiments were scaled up in a 700-mL working volume bioreactor, and the resulting chitin was deacetylated by the autoclave method. The bioextracted chitosan was characterized (Fourier transform infrared spectroscopy [FTIR], deacetylation degree, and molecular weight) and evaluated for its antimicrobial effects by comparing it with a commercial chitosan sample in the context of the ethanolic fermentation process for fuel alcohol production. The effect of chitosan on such a fermentation process has not been determined yet. The bacterial contaminant Lactobacillus fermentum and the main agent of ethanolic fermentation Saccharomyces cerevisiae were cultured in semi-synthetic medium and co-cultured in sugarcane juice to verify the effect of chitosan on their growth. The bioextracted chitosan (molecular weight 4.0 × 10⁵ g mol^-1 and deacetylation degree 80%) was comparable to commercial chitosan, although higher concentrations of the former were required to achieve similar antimicrobial activities. Both commercial and bioextracted chitosan samples exhibited antimicrobial activity against S. cerevisiae and L. fermentum, but the concentration that caused the inhibition of yeast growth was almost tenfold higher than for the bacterium. Moreover, bioextracted chitosan showed no yeast inhibition or lethality in the range of 0.0075-0.96% while for the bacterium, growth inhibition occurred in concentrations varying from 0.24 to 0.48% and lethality of more than 99% at 0.96%. These results indicate the potential use of chitosan and especially of bioextracted chitosan in the bioethanol industry as a safer and more natural approach to combat unwanted bacterial contamination.

Effect of sodium chloride and chitosan on the inactivation of heat resistant or Shiga-toxin producing Escherichia coli during grilling of burger patties

Cattle are a reservoir for enterohemorrhagic Escherichia coli (EHEC), and ground beef is a major vehicle for human infection with EHEC. Heat resistance of E. coli, including EHEC, is impacted by NaCl and other additives. This study aimed to evaluate the effect of NaCl and other additives on the heat resistance of E. coli in beef patties. E. coli AW1.7ΔpHR1(pLHR) with the locus of heat resistance (LHR), E. coli AW1.7ΔpHR1(pRK767) without LHR, or a 5-strain cocktail of EHEC were inoculated (10⁷-10⁸ CFU/g) into ground beef (15% fat) with NaCl (0-3%), marinade, carvacrol (0.1%), potassium lactate (3%) or chitosan (0.1%) following different protocols. Patties were grilled immediately, or stored in sterile bags for two days at 4 °C prior to grilling to a core temperature of 71 °C. Cell counts of LHR-positive E. coli AW1.7ΔpHR1(pLHR) were higher than that of the isogenic LHR-negative E. coli AW1.7ΔpHR1(pRK767) by >3 log₁₀ (CFU/g) after cooking. Addition of 3% NaCl increased survival of E. coli AW1.7ΔpHR1(pRK767) and the EHEC cocktail while cell counts of the heat resistant strains were not changed. A protective effect of NaCl was not observed with E. coli AW1.7ΔpHR1(pRK767) or EHEC if cells of E. coli were cooled to 4 °C prior to mixing with cold meat and NaCl, indicating that the response of E. coli to osmotic shock contributes to this effect. Chitosan enhanced the thermal destruction of LHR-positive E. coli AW1.7ΔpHR1(pLHR) in ground beef stored at 4 °C for 2 days, while marinade, carvacrol, or potassium lactate had no such effect, indicating that chitosan can be characterized as an effective hurdle concept to reduce the potential risk of LHR-positive pathogen to meat safety.

Antimicrobial activity of bioactive starch packaging films against Listeria monocytogenes and reconstituted meat microbiota on ham

Contamination with spoilage organisms and Listeria monocytogenes are major concerns for quality and safety of cooked ready-to-eat (RTE) meat products. Thus, the objective of this study was to investigate the use of antimicrobial starch packaging films to control competitive microbiota and L. monocytogenes growth on a RTE ham product. Starch packaging films were prepared with different bioactives, gallic acid, chitosan, and carvacrol, using subcritical water technology. The viability of the incorporated strains on ham in contact with different antimicrobial starch packaging films was examined during 28-day storage period at 4 °C. Starch films with gallic acid had the least effect on ham antimicrobial activity; starch films with chitosan and carvacrol fully inhibited L. monocytogenes growth throughout 4 weeks of storage. RTE meat microbiota was more resistant to the antimicrobials than L. monocytogenes. Starch films loaded with chitosan or chitosan and carvacrol did not fully inhibit growth of RTE meat microbiota but delayed growth of RTE meat microbiota by one to two weeks. Moreover, competitive meat microbiota fully inhibited growth of L. monocytogenes. Therefore, antimicrobial starch packaging films prepared by subcritical water technology used in this study showed a promising effect on inhibiting L. monocytogenes in RTE ham.