A review of trabecular bone functional adaptation: what have we learned from trabecular analyses in extant hominoids and what can we apply to fossils?

Macroscopic differences in adult human femora are linked to body mass index

Bone functional adaptation is routinely invoked to interpret skeletal morphology despite ongoing debate regarding the limits of the bone response to mechanical stimuli. The wide variation in human body mass presents an opportunity to explore the relationship between mechanical load and skeletal response in weight-bearing elements. Here, we examine variation in femoral macroscopic morphology as a function of body mass index (BMI), which is used as a metric of load history. A sample of 80 femora (40 female; 40 male) from recent modern humans was selected from the Texas State University Donated Skeletal Collection. Femora were imaged using x-ray computed tomography (voxel size ~0.5 mm), and segmented to produce surface models. Landmark-based geometric morphometric analyses based on the Coherent Point Drift algorithm were conducted to quantify shape. Principal components analyses were used to summarize shape variation, and component scores were regressed on BMI. Within the male sample, increased BMI was associated with a mediolaterally expanded femoral shaft, as well as increased neck-shaft angle and decreased femoral neck anteversion angle. No statistically significant relationships between shape and BMI were found in the female sample. While mechanical stimulus has traditionally been applied to changes in long bong diaphyseal shape it appears that bone functional adaptation may also result in fundamental changes in the shape of skeletal elements.

Trabecular bone variation in the gorilla calcaneus

OBJECTIVES

Calcaneal external shape differs among nonhuman primates relative to locomotion. Such relationships between whole-bone calcaneal trabecular structure and locomotion, however, have yet to be studied. Here we analyze calcaneal trabecular architecture in Gorilla gorilla gorilla, Gorilla beringei beringei, and G. b. graueri to investigate general trends and fine-grained differences among gorilla taxa relative to locomotion.

MATERIALS AND METHODS

Calcanei were micro-CT scanned. A three-dimensional geometric morphometric sliding semilandmark analysis was carried out and the final landmark configurations used to position 156 volumes of interest. Trabecular thickness (Tb.Th), trabecular spacing (Tb.Sp), and bone volume fraction (BV/TV) were calculated using the BoneJ plugin for ImageJ and MATLAB. Non-parametric MANOVAs were run to test for significant differences among taxa in parameter raw values and z-scores. Parameter distributions were visualized using color maps and summarized using principal components analysis.

RESULTS

There are no significant differences in raw BV/TV or Tb.Th among gorillas, however G. b. beringei significantly differs in z-scores for both parameters (p = <0.0271). All three taxa exhibit relatively lower BV/TV and Tb.Th in the posterior half of the calcaneus. This gradation is exacerbated in G. b. beringei. G. b. graueri significantly differs from other taxa in Tb.Sp z-scores (p < 0.001) indicating a different spacing distribution.

DISCUSSION

Relatively higher Tb.Th and BV/TV in the anterior calcaneus among gorillas likely reflects higher forces associated with body mass (transmitted through the subtalar joint) relative to forces transferred through the posterior calcaneus. The different Tb.Sp pattern in G. b. graueri may reflect proposed differences in foot positioning during locomotion.

Nanofiber-induced hierarchically-porous magnesium phosphate bone cements accelerate bone regeneration by inhibiting Notch signaling

Magnesium phosphate bone cements (MPC) have been recognized as a viable alternative for bone defect repair due to their high mechanical strength and biodegradability. However, their poor porosity and permeability limit osteogenic cell ingrowth and vascularization, which is critical for bone regeneration. In the current study, we constructed a novel hierarchically-porous magnesium phosphate bone cement by incorporating extracellular matrix (ECM)-mimicking electrospun silk fibroin (SF) nanofibers. The SF-embedded MPC (SM) exhibited a heterogeneous and hierarchical structure, which effectively facilitated the rapid infiltration of oxygen and nutrients as well as cell ingrowth. Besides, the SF fibers improved the mechanical properties of MPC and neutralized the highly alkaline environment caused by excess magnesium oxide. Bone marrow stem cells (BMSCs) adhered excellently on SM, as illustrated by formation of more pseudopodia. CCK8 assay showed that SM promoted early proliferation of BMSCs. Our study also verified that SM increased the expression of OPN, RUNX2 and BMP2, suggesting enhanced osteogenic differentiation of BMSCs. We screened for osteogenesis-related pathways, including FAK signaing, Wnt signaling and Notch signaling, and found that SM aided in the process of bone regeneration by suppressing the Notch signaling pathway, proved by the downregulation of NICD1, Hes1 and Hey2. In addition, using a bone defect model of rat calvaria, the study revealed that SM exhibited enhanced osteogenesis, bone ingrowth and vascularization compared with MPC alone. No adverse effect was found after implantation of SM in vivo. Overall, our novel SM exhibited promising prospects for the treatment of critical-sized bone defects.

Bioinspired nanostructured hydroxyapatite-polyelectrolyte multilayers for stone conservation

Stone-built cultural heritage faces threats from natural forces and anthropogenic pollutants, including local climate, acid rain, and outdoor conditions like temperature fluctuations and wind exposure, all of which impact their structural integrity and lead to their degradation. The development of a water-based, environmentally-friendly protective coatings that meet a combination of requirements posed by the diversity of the substrates, different environmental conditions, and structures with complex geometries remains a formidable challenge, given the numerous obstacles faced by current conservation strategies. Here we report the structural, electrical, and mechanical characterization, along with performance testing, of a nanostructured hydrophilic and self-healing hybrid coating based on hydroxyapatite (HAp) nanocrystals and polyelectrolyte multilayers (PEM), formed in-situ on Greek marble through a simple spray layer-by-layer surface functionalization technique. The polyelectrolyte-hydroxyapatite multilayer (PHM) structure resembled the design of naturally forming trabecular bone, attained at a short procedural time. It exhibited chemical affinity, aesthetical compatibility and resistance to weathering while offering reversibility. The proposed method is able to generate micron-sized coatings with controlled properties, such as adhesion and self-healing, leading to less weathered surfaces. Our results show that the PHM is a highly effective protective material that can be applied for stone protection and other similar applications.

Cortical and Trabecular Bone Modeling and Implications for Bone Functional Adaptation in the Mammalian Tibia

Bone modeling involves the addition of bone material through osteoblast-mediated deposition or the removal of bone material via osteoclast-mediated resorption in response to perceived changes in loads by osteocytes. This process is characterized by the independent occurrence of deposition and resorption, which can take place simultaneously at different locations within the bone due to variations in stress levels across its different regions. The principle of bone functional adaptation states that cortical and trabecular bone tissues will respond to mechanical stimuli by adjusting (i.e., bone modeling) their morphology and architecture to mechanically improve their mechanical function in line with the habitual in vivo loading direction. This principle is relevant to various research areas, such as the development of improved orthopedic implants, preventative medicine for osteopenic elderly patients, and the investigation of locomotion behavior in extinct species. In the present review, the mammalian tibia is used as an example to explore cortical and trabecular bone modeling and to examine its implications for the functional adaptation of bones. Following a short introduction and an exposition on characteristics of mechanical stimuli that influence bone modeling, a detailed critical appraisal of the literature on cortical and trabecular bone modeling and bone functional adaptation is given. By synthesizing key findings from studies involving small mammals (rodents), large mammals, and humans, it is shown that examining both cortical and trabecular bone structures is essential for understanding bone functional adaptation. A combined approach can provide a more comprehensive understanding of this significant physiological phenomenon, as each structure contributes uniquely to the phenomenon.

Cortical bone architecture of hominid intermediate phalanges reveals functional signals of locomotion and manipulation

OBJECTIVES

Reconstruction of fossil hominin manual behaviors often relies on comparative analyses of extant hominid hands to understand the relationship between hand use and skeletal morphology. In this context, the intermediate phalanges remain understudied. Thus, here we investigate cortical bone morphology of the intermediate phalanges of extant hominids and compare it to the cortical structure of the proximal phalanges, to investigate the relationship between cortical bone structure and inferred loading during manual behaviors.

MATERIALS AND METHODS

Using micro-CT data, we analyze cortical bone structure of the intermediate phalangeal shaft of digits 2-5 in Pongo pygmaeus (n = 6 individuals), Gorilla gorilla (n = 22), Pan spp. (n = 23), and Homo sapiens (n = 23). The R package morphomap is used to study cortical bone distribution, cortical thickness and cross-sectional properties within and across taxa.

RESULTS

Non-human great apes generally have thick cortical bone on the palmar shaft, with Pongo only having thick cortex on the peaks of the flexor sheath ridges, while African apes have thick cortex along the entire flexor sheath ridge and proximal to the trochlea. Humans are distinct in having thicker dorsal shaft cortex as well as thick cortex at the disto-palmar region of the shaft.

DISCUSSION

Variation in cortical bone distribution and properties of the intermediate phalanges is consistent with differences in locomotor and manipulative behaviors in extant great apes. Comparisons between the intermediate and proximal phalanges reveals similar patterns of cortical bone distribution within each taxon but with potentially greater load experienced by the proximal phalanges, even in knuckle-walking African apes. This study provides a comparative context for the reconstruction of habitual hand use in fossil hominins and hominids.

Adaptive enhancement of apatite crystal orientation and Young's modulus under elevated load in rat ulnar cortical bone

Functional adaptation refers to the active modification of bone structure according to the mechanical loads applied daily to maintain its mechanical integrity and adapt to the environment. Functional adaptation relates to bone mass, bone mineral density (BMD), and bone morphology (e.g., trabecular bone architecture). In this study, we discovered for the first time that another form of bone functional adaptation of a cortical bone involves a change in bone quality determined by the preferential orientation of apatite nano-crystallite, a key component of the bone. An in vivo rat ulnar axial loading model was adopted, to which a 3-15 N compressive load was applied, resulting in approximately 440-3200 μɛ of compression in the bone surface. In the loaded ulnae, the degree of preferential apatite c-axis orientation along the ulnar long axis increased in a dose-dependent manner up to 13 N, whereas the increase in BMD was not dose-dependent. The Young's modulus along the same direction was enhanced as a function of the degree of apatite orientation. This finding indicates that bone has a mechanism that modifies the directionality (anisotropy) of its microstructure, strengthening itself specifically in the loaded direction. BMD, a scalar quantity, does not allow for load-direction-specific strengthening. Functional adaptation through changes in apatite orientation is an excellent strategy for bones to efficiently change their strength in response to external loading, which is mostly anisotropic.

Estimation of the forces exerted on the limb long bones of a white rhinoceros (Ceratotherium simum) using musculoskeletal modelling and simulation

Heavy animals incur large forces on their limb bones, due to the transmission of body weight and ground reaction forces, and the contractions of the various muscles of the limbs. This is particularly true for rhinoceroses, the heaviest extant animals capable of galloping. Several studies have examined their musculoskeletal system and the forces their bones incur, but no detailed quantification has ever been attempted. Such quantification could help understand better the link between form and function in giant land animals. Here we constructed three-dimensional musculoskeletal models of the forelimb and hindlimb of Ceratotherium simum, the heaviest extant rhino species, and used static optimisation (inverse) simulations to estimate the forces applied on the bones when standing at rest, including magnitudes and directions. Overall, unsurprisingly, the most active muscles were antigravity muscles, which generate moments opposing body weight (thereby incurring the ground reaction force), and thus keep the joints extended, avoiding joint collapse via flexion. Some muscles have an antigravity action around several joints, and thus were found to be highly active, likely specialised in body weight support (ulnaris lateralis; digital flexors). The humerus was subjected to the greatest amount of forces in terms of total magnitude; forces on the humerus furthermore came from a great variety of directions. The radius was mainly subject to high-magnitude compressive joint reaction forces, but to little muscular tension, whereas the opposite pattern was observed for the ulna. The femur had a pattern similar to that of the humerus, and the tibia's pattern was intermediate, being subject to great compression in its caudal side but to great tension in its cranial side (i.e. bending). The fibula was subject to by far the lowest force magnitude. Overall, the forces estimated were consistent with the documented morphofunctional adaptations of C. simum's long bones, which have larger insertion areas for several muscles and a greater robusticity overall than those of lighter rhinos, likely reflecting the intense forces we estimated here. Our estimates of muscle and bone (joint) loading regimes for this giant tetrapod improve the understanding of the links between form and function in supportive tissues and could be extended to other aspects of bone morphology, such as microanatomy.

The deep trabecular structure of first metacarpals in extant hominids

OBJECTIVES

Recent studies have associated subarticular trabecular bone distribution in the extant hominid first metacarpal (Mc1) with observed thumb use, to infer fossil hominin thumb use. Here, we analyze the entire Mc1 to test for interspecific differences in: (1) the absolute volume of trabecular volume fraction, (2) the distribution of the deeper trabecular network, and (3) the distribution of trabeculae in the medullary cavity, especially beneath the Mc1 disto-radial flange.

MATERIALS AND METHODS

Trabecular bone was imaged using micro-computed tomography in a sample of Homo sapiens (n = 11), Pan paniscus (n = 10), Pan troglodytes (n = 11), Gorilla gorilla (n = 10) and Pongo sp., (n = 7). Using Canonical Holistic Morphometric Analysis (cHMA), we tested for interspecific differences in the trabecular bone volume fraction (BV/TV) and its relative distribution (rBV/TV) throughout the Mc1, including within the head, medullary cavity, and base.

RESULTS

P. paniscus had the highest, and H. sapiens the lowest, BV/TV relative to other species. rBV/TV distribution statistically distinguished the radial concentrations and lack of medullary trabecular bone in the H. sapiens Mc1 from all other hominids. H. sapiens and, to a lesser extent, G. gorilla also had a significantly higher trabecular volume beneath the disto-radial flange relative to other hominids.

DISCUSSION

These results are consistent with differences in observed thumb use in these species and may also reflect systemic differences in bone volume fraction. The trabecular bone extension into the medullary cavity and concentrations beneath the disto-radial flange may represent crucial biomechanical signals that will aid in the inference of fossil hominin thumb use.

Trabecular bone structure of the proximal capitate in extant hominids and fossil hominins with implications for midcarpal joint loading and the dart-thrower's motion

OBJECTIVES

This research examines whether the distribution of trabecular bone in the proximal capitates of extant hominids, as well as several fossil hominin taxa, is associated with the oblique path of the midcarpal joint known as the dart-thrower's motion (DTM).

MATERIALS AND METHODS

We analyzed proximal capitates from extant (Pongo n = 12; Gorilla n = 11; Pan n = 10; fossil and recent Homo sapiens n = 29) and extinct (Australopithecus sediba n = 2; Homo naledi n = 1; Homo floresiensis n = 2; Neandertals n = 3) hominids using a new canonical holistic morphometric analysis, which quantifies and visualizes the distribution of trabecular bone using relative bone volume as a fraction of total volume (rBV/TV).

RESULTS

Homo sapiens and Neandertals had a continuous band of high rBV/TV that extended across the scaphoid, lunate, and hamate subarticular regions, but other fossil hominins and extant great apes did not. A. sediba expressed a distinct combination of human-like and Pan-like rBV/TV distribution. Both H. floresiensis and H. naledi had high rBV/TV on the ulnar-side of the capitate but low rBV/TV on the radial-side.

CONCLUSION

The proximal capitates of H. sapiens and Neandertals share a distinctive distribution of trabecular bone that suggests that these two species of Homo regularly load(ed) their midcarpal joints along the full extent of the oblique path of the DTM. The observed pattern in A. sediba suggests that human-like stress at the capito-scaphoid articular surface was combined with Pan-like wrist postures, whereas the patterns in H. floresiensis and H. naledi suggest their midcarpal joints were loaded differently from that of H. sapiens and Neandertals.

Comparing lateral plantar process trabecular structure to other regions of the human calcaneus

Investigating skeletal adaptations to bipedalism informs our understanding of form-function relationships. The calcaneus is an important skeletal element to study because it is a weight-bearing bone with a critical locomotor role. Although other calcaneal regions have been well studied, we lack a clear understanding of the functional role of the lateral plantar process (LPP). The LPP is a bony protuberance on the inferolateral portion of the calcaneus thought to aid the tuberosity in transmission of ground reaction forces during heel-strike. Here, we analyze LPP internal trabecular structure relative to other calcaneal regions to investigate its potential functional affinities. Human calcanei (n = 20) were micro-CT scanned, and weighted spherical harmonic analysis outputs were used to position 251 volumes of interest (VOI) within each bone. Trabecular thickness (Tb.Th), spacing (Tb.Sp), degree of anisotropy (DA), and bone volume fraction (BV/TV) were calculated for each VOI. Similarities in BV/TV and DA (p = 0.2741) between the LPP and inferior tuberosity support suggestions that the LPP is a weight-bearing structure that may transmit forces in a similar direction. The LPP significantly differs from the inferior tuberosity in Tb.Th and Tb.Sp (p < 0.05). Relatively thinner, more closely spaced trabeculae in the LPP may serve to increase internal surface area to compensate for its relatively small size compared to the tuberosity. Significant differences in all parameters between LPP and joint articular surfaces indicate that trabecular morphology is differently adapted for the transmission of forces associated with body mass through joints.

Linking morphology, performance, and habitat utilization: adaptation across biologically relevant 'levels' in tamarins

BACKGROUND

Biological adaptation manifests itself at the interface of different biologically relevant 'levels', such as ecology, performance, and morphology. Integrated studies at this interface are scarce due to practical difficulties in study design. We present a multilevel analysis, in which we combine evidence from habitat utilization, leaping performance and limb bone morphology of four species of tamarins to elucidate correlations between these 'levels'.

RESULTS

We conducted studies of leaping behavior in the field and in a naturalistic park and found significant differences in support use and leaping performance. Leontocebus nigrifrons leaps primarily on vertical, inflexible supports, with vertical body postures, and covers greater leaping distances on average. In contrast, Saguinus midas and S. imperator use vertical and horizontal supports for leaping with a relatively similar frequency. S. mystax is similar to S. midas and S. imperator in the use of supports, but covers greater leaping distances on average, which are nevertheless shorter than those of L. nigrifrons. We assumed these differences to be reflected in the locomotor morphology, too, and compared various morphological features of the long bones of the limbs. According to our performance and habitat utilization data, we expected the long bone morphology of L. nigrifrons to reflect the largest potential for joint torque generation and stress resistance, because we assume longer leaps on vertical supports to exert larger forces on the bones. For S. mystax, based on our performance data, we expected the potential for torque generation to be intermediate between L. nigrifrons and the other two Saguinus species. Surprisingly, we found S. midas and S. imperator having relatively more robust morphological structures as well as relatively larger muscle in-levers, and thus appearing better adapted to the stresses involved in leaping than the other two.

CONCLUSION

This study demonstrates the complex ways in which behavioral and morphological 'levels' map onto each other, cautioning against oversimplification of ecological profiles when using large interspecific eco-morphological studies to make adaptive evolutionary inferences.

The Role of Bone Mineral Density in a Successful Lumbar Interbody Fusion: A Narrative Review

BACKGROUND

The incidence of osteoporosis is a prime concern, especially in parts of the world where the population is aging, such as Europe or the US. Many new therapy strategies have been described to enhance bone healing. Lumbar interbody fusion (LIF) is a surgical procedure that aims to stabilize the lumbar spine by fusing two or more vertebrae using an interbody cage. LIF is a standard treatment for various spinal conditions, such as degenerative disc disease, spinal stenosis, and spondylolisthesis. However, successful fusion is challenging for patients with osteoporosis due to their reduced bone mineral density (BMD) and increased risk of cage subsidence, which can lead to implant failure and poor clinical outcomes.

METHODS

 A comprehensive literature search yielded 220 articles, with 16 ultimately included. Keywords included BMD, cage subsidence, osteoporosis, teriparatide, and lumbar interbody fusion.

RESULTS

 This review examines the relationship between BMD and LIF success, emphasizing the importance of adequate bone quality for successful fusion. Preoperative assessment methods for BMD and the impact of low BMD on fusion rates and patient outcomes are discussed. Additionally, techniques to improve fusion success in patients with weakened bone density, such as biological enhancement and BMD-matched interbody cages, are explored. However, consensus on the exact BMD threshold for a successful outcome remains elusive.

CONCLUSION

 While an apparent correlation between BMD and fusion rate in LIF procedures is acknowledged, conclusive evidence regarding the precise BMD threshold indicative of an increased risk of unfavorable outcomes remains elusive. Surgeons are advised to exercise caution in surgical planning and follow-up for patients with lower BMD. Furthermore, future research initiatives, particularly longitudinal studies, are encouraged to prioritize the examination of BMD as a fundamental risk factor, addressing gaps in the literature.

Variation and covariation of external shape and cross-sectional geometry in the human metacarpus

OBJECTIVES

Analyses of external bone shape using geometric morphometrics (GM) and cross-sectional geometry (CSG) are frequently employed to investigate bone structural variation and reconstruct activity in the past. However, the association between these methods has not been thoroughly investigated. Here, we analyze whole bone shape and CSG variation of metacarpals 1-5 and test covariation between them.

MATERIALS AND METHODS

We analyzed external metacarpal shape using GM and CSG of the diaphysis at three locations in metacarpals 1-5. The study sample includes three modern human groups: crew from the shipwrecked Mary Rose (n = 35 metacarpals), a Pre-industrial group (n = 50), and a Post-industrial group (n = 31). We tested group differences in metacarpal shape and CSG, as well as correlations between these two aspects of metacarpal bone structure.

RESULTS

GM analysis demonstrated metacarpus external shape variation is predominately related to changes in diaphyseal width and articular surface size. Differences in external shape were found between the non-pollical metacarpals of the Mary Rose and Pre-industrial groups and between the third metacarpals of the Pre- and Post-industrial groups. CSG results suggest the Mary Rose and Post-industrial groups have stronger metacarpals than the Pre-industrial group. Correlating CSG and external shape showed significant relationships between increasing external robusticity and biomechanical strength across non-pollical metacarpals (r: 0.815-0.535; p ≤ 0.05).

DISCUSSION

Differences in metacarpal cortical structure and external shape between human groups suggest differences in the type and frequency of manual activities. Combining these results with studies of entheses and kinematics of the hand will improve reconstructions of manual behavior in the past.

Covariation between the shape and mineralized tissues of the rib cross section in Homo sapiens, Pan troglodytes and Sts 14

OBJECTIVES

Studying rib torsion is crucial for understanding the evolution of the hominid ribcage. Interestingly, there are variables of the rib cross section that could be associated with rib torsion and, consequently, with the morphology of the thorax. The aim of this research is to conduct a comparative study of the shape and mineralized tissues of the rib cross section in different hominids to test for significant differences and, if possible, associate them to different thoracic morphotypes.

MATERIALS AND METHODS

The sample consists of the rib cross sections at the midshaft taken from 10 Homo sapiens and 10 Pan troglodytes adult individuals, as well as from A. africanus Sts 14. The shape of these rib cross sections was quantified using geometric morphometrics, while the mineralized tissues were evaluated using the compartmentalization index. Subsequently, covariation between both parameters was tested by a Spearman's ρ test, a permutation test and a linear regression.

RESULTS

Generally, P. troglodytes individuals exhibit rib cross sections that are rounder and more mineralized compared to those of H. sapiens. However, the covariation between both parameters was only observed in typical ribs (levels 3-10). Although covariation was not found in the rib cross sections of Sts 14, their parameters are closer to P. troglodytes.

DISCUSSION

On the one hand, the differences observed in the rib cross sections between H. sapiens and P. troglodytes might be related to different degrees of rib torsion and, consequently, to different thoracic 3D configurations. These findings can be functionally explained by considering their distinct modes of breathing and locomotion. On the other hand, although the rib cross sections belonging to Sts 14 are more similar to those of P. troglodytes, previous publications determined that their overall morphology is closer to modern humans. This discrepancy could reflect a diversity of post-cranial adaptations in Australopithecus.

An orthotropic continuum model with substructure evolution for describing bone remodeling: an interpretation of the primary mechanism behind Wolff's law

We propose a variational approach that employs a generalized principle of virtual work to estimate both the mechanical response and the changes in living bone tissue during the remodeling process. This approach provides an explanation for the adaptive regulation of the bone substructure in the context of orthotropic material symmetry. We specifically focus upon the crucial gradual adjustment of bone tissue as a structural material that adapts its mechanical features, such as materials stiffnesses and microstructure, in response to the evolving loading conditions. We postulate that the evolution process relies on a feedback mechanism involving multiple stimulus signals. The mechanical and remodeling behavior of bone tissue is clearly a complex process that is difficult to describe within the framework of classical continuum theories. For this reason, a generalized continuum elastic theory is employed as a proper mathematical context for an adequate description of the examined phenomenon. To simplify the investigation, we considered a two-dimensional problem. Numerical simulations have been performed to illustrate bone evolution in a few significant cases: the bending of a rectangular cantilever plate and a three-point flexure test. The results are encouraging because they can replicate the optimization process observed in bone remodeling. The proposed model provides a likely distribution of stiffnesses and accurately represents the arrangement of trabeculae macroscopically described by the orthotropic symmetry directions, as supported by experimental evidence from the trajectorial theory.

The various meanings and uses of bone "remodeling" in biological anthropology: A review

OBJECTIVES

In modern bone biology, the term "remodeling" generally refers to internal bone turnover that creates secondary osteons. However, it is also widely used by skeletal biologists, including biological anthropologists as a catch-all term to refer to different skeletal changes. In this review, we investigated how "remodeling" is used across topics on skeletal biology in biological anthropology to demonstrate potential problems with such pervasive use of a generalized term.

METHODS

Using PubMed and Google Scholar, we selected and reviewed 205 articles that use the term remodeling to describe skeletal processes and have anthropological implications. Nine edited volumes were also reviewed as examples of collaborative work by different experts to demonstrate the diverse and extensive use of the term remodeling.

RESULTS

Four general meanings of bone "remodeling" were identified, namely, internal turnover, functional adaptation, fracture repair, and growth remodeling. Additionally, remodeling is also used to refer to a broad array of pathological skeletal changes.

DISCUSSION

Although we initially identified four general meanings of bone remodeling, they are not mutually exclusive and often occur in combination. The term "remodeling" has become an extensively used catch-all term to refer to different processes and outcomes of skeletal changes, which inevitably lead to misunderstanding and a loss of information. Such ambiguity and confusion are potentially problematic as the field of biological anthropology becomes increasingly multidisciplinary. Therefore, we advocate for precise, context-specific definitions and explanations of bone remodeling as it continues to be used across disciplines within and beyond biological anthropology.

A macroevolutionary common-garden experiment reveals differentially evolvable bone organization levels in slow arboreal mammals

Eco-morphological convergence, i.e., similar phenotypes evolved in ecologically convergent taxa, naturally reproduces a common-garden experiment since it allows researchers to keep ecological factors constant, studying intrinsic evolutionary drivers. The latter may result in differential evolvability that, among individual anatomical parts, causes mosaic evolution. Reconstructing the evolutionary morphology of the humerus and femur of slow arboreal mammals, we addressed mosaicism at different bone anatomical spatial scales. We compared convergence strength, using it as indicator of evolvability, between bone external shape and inner structure, with the former expected to be less evolvable and less involved in convergent evolution, due to anatomical constraints. We identify several convergent inner structural traits, while external shape only loosely follows this trend, and we find confirmation for our assumption in measures of convergence magnitude. We suggest that future macroevolutionary reconstructions based on bone morphology should include structural traits to better detect ecological effects on vertebrate diversification.

Influence of size and shape of the auricular surfaces on subchondral bone density distribution in the sacroiliac joint

The sacroiliac auricular surface has a variable morphology and size. The impact of such variations on subchondral mineralization distribution has not been investigated. Sixty-nine datasets were subjected to CT-osteoabsorptiometry for the qualitative visualization of chronic loading conditions of the subchondral bone plate using color-mapped densitograms based on Hounsfield Units in CT. Auricular surface morphologies were classified into three types based on posterior angle size: Type 1: >160°, Type 2: 130-160° and Type 3: <130°. Auricular surface size was categorized based on the mean value (15.4 cm2 ) separating the group into 'small' and 'large' joint surfaces. Subchondral bone density patterns were qualitatively classified into four color patterns: two marginal patterns (M1 and M2) and two non-marginal patterns (N1 and N2) and each iliac and sacral surface was subsequently categorized. 'Marginal' meant that 60-70% of the surface was less mineralized compared with the highly dense regions and vice versa for the 'non-marginal' patterns. M1 had anterior border mineralization and M2 had mineralization scattered around the borders. N1 had mineralization spread over the whole superior region, N2 had mineralization spread over the superior and anterior regions. Auricular surface area averaged 15.4 ± 3.6 cm2 , with a tendency for males to have larger joint surfaces. Type 2 was the most common (75%) and type 3 the least common morphology (9%). M1 was the most common pattern (62% of surfaces) by sex (males 60%, females 64%) with the anterior border as the densest region in all three morphologies. Sacra have a majority of surfaces with patterns from the marginal group (98%). Ilia have mineralization concentrated at the anterior border (patterns M1 and N2 combined: 83%). Load distribution differences related to auricular surface morphology seems to have little effect on long-term stress-related bone adaptation visualized with CT-osteoabsorptiometry. Higher iliac side mineralization was observed in larger joint surfaces and age-related morphomechanical size alterations were seen in males.

Evolution of posture in amniotes-Diving into the trabecular architecture of the femoral head

Extant amniotes show remarkable postural diversity. Broadly speaking, limbs with erect (strongly adducted, more vertically oriented) posture are found in mammals that are particularly heavy (graviportal) or show good running skills (cursorial), while crouched (highly flexed) limbs are found in taxa with more generalized locomotion. In Reptilia, crocodylians have a "semi-erect" (somewhat adducted) posture, birds have more crouched limbs and lepidosaurs have sprawling (well-abducted) limbs. Both synapsids and reptiles underwent a postural transition from sprawling to more erect limbs during the Mesozoic Era. In Reptilia, this postural change is prominent among archosauriforms in the Triassic Period. However, limb posture in many key Triassic taxa remains poorly known. In Synapsida, the chronology of this transition is less clear, and competing hypotheses exist. On land, the limb bones are subject to various stresses related to body support that partly shape their external and internal morphology. Indeed, bone trabeculae (lattice-like bony struts that form the spongy bone tissue) tend to orient themselves along lines of force. Here, we study the link between femoral posture and the femoral trabecular architecture using phylogenetic generalized least squares. We show that microanatomical parameters measured on bone cubes extracted from the femoral head of a sample of amniote femora depend strongly on body mass, but not on femoral posture or lifestyle. We reconstruct ancestral states of femoral posture and various microanatomical parameters to study the "sprawling-to-erect" transition in reptiles and synapsids, and obtain conflicting results. We tentatively infer femoral posture in several hypothetical ancestors using phylogenetic flexible discriminant analysis from maximum likelihood estimates of the microanatomical parameters. In general, the trabecular network of the femoral head is not a good indicator of femoral posture. However, ancestral state reconstruction methods hold great promise for advancing our understanding of the evolution of posture in amniotes.

Exploration of the synergistic role of cortical thickness asymmetry ("Trabecular Eccentricity" concept) in reducing fracture risk in the human femoral neck and a control bone (Artiodactyl Calcaneus)

The mechanobiology of the human femoral neck is a focus of research for many reasons including studies that aim to curb age-related bone loss that contributes to a near-exponential rate of hip fractures. Many believe that the femoral neck is often loaded in rather simple bending, which causes net tension stress in the upper (superior) femoral neck and net compression stress in its inferior aspect ("T/C paradigm"). This T/C loading regime lacks in vivo proof. The "C/C paradigm" is a plausible alternative simplified load history that is characterized by a gradient of net compression across the entire femoral neck; action of the gluteus medius and external rotators of the hip are important in this context. It is unclear which paradigm is at play in natural loading due to lack of in vivo bone strain data and deficiencies in understanding mechanisms and manifestations of bone adaptation in tension vs. compression. For these reasons, studies of the femoral neck would benefit from being compared to a 'control bone' that has been proven, by strain data, to be habitually loaded in bending. The artiodactyl (sheep and deer) calcaneus model has been shown to be a very suitable control in this context. However, the application of this control in understanding the load history of the femoral neck has only been attempted in two prior studies, which did not examine the interplay between cortical and trabecular bone, or potential load-sharing influences of tendons and ligaments. Our first goal is to compare fracture risk factors of the femoral neck in both paradigms. Our second goal is to compare and contrast the deer calcaneus to the human femoral neck in terms of fracture risk factors in the T/C paradigm (the C/C paradigm is not applicable in the artiodactyl calcaneus due to its highly constrained loading). Our third goal explores interplay between dorsal/compression and plantar/tension regions of the deer calcaneus and the load-sharing roles of a nearby ligament and tendon, with insights for translation to the femoral neck. These goals were achieved by employing the analytical model of Fox and Keaveny (J. Theoretical Biology 2001, 2003) that estimates fracture risk factors of the femoral neck. This model focuses on biomechanical advantages of the asymmetric distribution of cortical bone in the direction of habitual loading. The cortical thickness asymmetry of the femoral neck (thin superior cortex, thick inferior cortex) reflects the superior-inferior placement of trabecular bone (i.e., "trabecular eccentricity," TE). TE helps the femoral neck adapt to typical stresses and strains through load-sharing between superior and inferior cortices. Our goals were evaluated in the context of TE. Results showed the C/C paradigm has lower risk factors for the superior cortex and for the overall femoral neck, which is clinically relevant. TE analyses of the deer calcaneus revealed important synergism in load-sharing between the plantar/tension cortex and adjacent ligament/tendon, which challenges conventional understanding of how this control bone achieves functional adaptation. Comparisons with the control bone also exposed important deficiencies in current understanding of human femoral neck loading and its potential histocompositional adaptations.

Biomechanical Characteristics and Analysis Approaches of Bone and Bone Substitute Materials

Bone has a special structure that is both stiff and elastic, and the composition of bone confers it with an exceptional mechanical property. However, bone substitute materials that are made of the same hydroxyapatite (HA) and collagen do not offer the same mechanical properties. It is important for bionic bone preparation to understand the structure of bone and the mineralization process and factors. In this paper, the research on the mineralization of collagen is reviewed in terms of the mechanical properties in recent years. Firstly, the structure and mechanical properties of bone are analyzed, and the differences of bone in different parts are described. Then, different scaffolds for bone repair are suggested considering bone repair sites. Mineralized collagen seems to be a better option for new composite scaffolds. Last, the paper introduces the most common method to prepare mineralized collagen and summarizes the factors influencing collagen mineralization and methods to analyze its mechanical properties. In conclusion, mineralized collagen is thought to be an ideal bone substitute material because it promotes faster development. Among the factors that promote collagen mineralization, more attention should be given to the mechanical loading factors of bone.

New specimens of the early Permian apex predator Varanops brevirostris at Richards Spur, Oklahoma, with histological information about its growth pattern

An articulated pelvic region and additional isolated material of Varanops brevirostris, which are indistinguishable from those of the generotype from the Cacops bonebed, demonstrate the presence of this large varanopid at the Richards Spur locality. The articulated specimen includes lumbar, sacral, and anterior caudal vertebrae, partial pelvis, femur, and proximal part of tibia, confirming the autapomorphies previously suggested for this species. These include the presence of distinct blade-like shapes of the neural spines in the sacral region, the presence of deeply excavated pubis, and the presence of a distinct transverse ridge on the ventral surface of the femur distal to the intertrochanteric fossa. It has also been found that the transverse ridges and grooves become larger during ontogeny since the juvenile specimen did not exhibit a well-developed ridge. Histological analysis of isolated limb bones and neutron computed tomography (nCT) of the articulated specimen indicate that the latter likely belonged to an adult individual. This is in contrast to the other varanopid at Richards Spur, the significantly smaller, more gracile predator Mesenosaurus efremovi, which also shows the presence of growth lines and the external fundamental system with an estimated minimum age of fourteen.

Morphologies in-between: The impact of the first steps on the human talus

OBJECTIVE

The development of bipedalism is a very complex activity that contributes to shaping the anatomy of the foot. The talus, which starts ossifying in utero, may account for the developing stages from the late gestational phase onwards. Here, we explore the early development of the talus in both its internal and external morphology to broaden the knowledge of the anatomical changes that occur during early development.

MATERIALS AND METHODS

The sample consists of high-resolution microCT scans of 28 modern juvenile tali (from 36 prenatal weeks to 2 years), from a broad chronological range from the Late Roman period to the 20th century. We applied geometric morphometric and whole-bone trabecular analysis to investigate the early talar morphological changes.

RESULTS

In the youngest group (<6 postnatal months), the immature external shell is accompanied by an isotropic internal structure, with thin and densely packed trabeculae. After the initial attempts of locomotion, bone volume fraction decreases, while anisotropy and trabecular thickness increase. These internal changes correspond to the maturation of the external shell, which is now more defined and shows the development of the articular surfaces.

DISCUSSION

The internal and external morphology of the human talus reflects the diverse load on the foot during the initial phases of the bipedal locomotion, with the youngest group potentially reflecting the lack of readiness of the human talus to bear forces and perform bipedal walking. These results highlight the link between mechanical loading and bone development in the human talus during the acquisition of bipedalism, providing new insight into the early phases of talar development.

Trabecular bone ontogeny tracks neural development and life history among humans and non-human primates

Trabecular bone-the spongy bone inside marrow cavities-adapts to its mechanical environment during growth and development. Trabecular structure can therefore be interpreted as a functional record of locomotor behavior in extinct vertebrates. In this paper, we expand upon traditional links between form and function by situating ontogenetic trajectories of trabecular bone in four primate species into the broader developmental context of neural development, locomotor control, and ultimately life history. Our aim is to show that trabecular bone structure provides insights into ontogenetic variation in locomotor loading conditions as the product of interactions between increases in body mass and neuromuscular maturation. Our results demonstrate that age-related changes in trabecular bone volume fraction (BV/TV) are strongly and linearly associated with ontogenetic changes in locomotor kinetics. Age-related variation in locomotor kinetics and BV/TV is in turn strongly associated with brain and body size growth in all species. These results imply that age-related variation in BV/TV is a strong proxy for both locomotor kinetics and neuromuscular maturation. Finally, we show that distinct changes in the slope of age-related variation in bone volume fraction correspond to the age of the onset of locomotion and the age of locomotor maturity. Our findings compliment previous studies linking bone development to locomotor mechanics by providing a fundamental link to brain development and life history. This implies that trabecular structure of fossil subadults can be a proxy for the rate of neuromuscular maturation and major life history events like locomotor onset and the achievement of adult-like locomotor repertoires.

Unique bone microanatomy reveals ancestry of subterranean specializations in mammals

Acquiring a subterranean lifestyle entails a substantial shift for many aspects of terrestrial vertebrates' biology. Although this lifestyle is associated with multiple instances of convergent evolution, the relative success of some subterranean lineages largely remains unexplained. Here, we focus on the mammalian transitions to life underground, quantifying bone microanatomy through high-resolution X-ray tomography. The true moles stand out in this dataset. Examination of this family's bone histology reveals that the highly fossorial moles acquired a unique phenotype involving large amounts of compacted coarse cancellous bone. This phenotype exceeds the adaptive optimum seemingly shared by several other subterranean mammals and can be traced back to some of the first known members of the family. This remarkable microanatomy was acquired early in the history of the group and evolved faster than the gross morphology innovations of true moles' forelimb. This echoes the pattern described for other lifestyle transitions, such as the acquisition of bone mass specializations in secondarily aquatic tetrapods. Highly plastic traits-such as those pertaining to bone structure-are hence involved in the early stages of different types of lifestyle transitions.

Potential Implications of Exercise Training on Pannexin Expression and Function

Pannexins (PANX1, 2, 3) are channel-forming glycoproteins that are expressed throughout the cardiovascular and musculoskeletal system. The canonical function of these proteins is to release nucleotides that act as purinergic signalling at the cell membrane or Ca2+ channels at the endoplasmic reticulum membrane. These two forms of signalling are essential for autocrine and paracrine signalling in health, and alterations in this signalling have been implicated in the pathogenesis of many diseases. Many musculoskeletal and cardiovascular diseases are largely the result of a lack of physical activity which causes altered gene expression. Considering exercise training has been shown to alter a wide array of gene expression in musculoskeletal tissues, understanding the interaction between exercise training, gene function and expression in relevant diseases is warranted. With regards to pannexins, multiple publications have shown that exercise training can influence pannexin expression and may influence the significance of its function in certain diseases. This review further discusses the potential interaction between exercise training and pannexin biology in relevant tissues and disease models. We propose that exercise training in relevant animal and human models will provide a more comprehensive understanding of the implications of pannexin biology in disease.

The effect of different grasping types on strain distributions in the trapezium of bonobos (Pan paniscus)

The thumb has played a key role in primate evolution due to its involvement in grasping and manipulation. A large component of this wide functionality is by virtue of the uniquely shaped trapeziometacarpal (TMC) joint. This TMC joint allows for a broad range of functional positions, but how its bone structure is adapted to withstand such a large variety of loading regimes is poorly understood. Here, we outline a novel, integrated finite element - micro finite element (FE-µFE) workflow to analyse strain distributions across the internal bony architecture. We have applied this modelling approach to study functional adaptation in the bonobo thumb. More specifically, the approach allows us to evaluate how strain is distributed through the trapezium upon loading of its distal articular facet. As loading conditions, we use pressure distributions for different types of grasping that were estimated in a previous study. Model evaluation shows that the simulated strain values fall within realistic boundaries of the mechanical response of bone. The results show that the strain distributions between the simulated grasps are highly similar, with dissipation towards the proximo-ulnar cluster of trabeculae regardless of trapezial bone architecture. This study presents an innovative FE-µFE approach to simulating strain distributions, and yields insight in the functional adaptation of the TMC joint in bonobos.

A fluid-structure interaction investigation of intra-articular pressure and ligament in wrist joint

Understanding the stresses on the scapholunate interosseous ligament (SLIL) and its interaction with synovial fluid pressure could be vital to improve wrist treatment for various wrist conditions such as arthritis, sprains and tendonitis. This study investigated the interaction between the intra-articular pressure, specifically the synovial fluid pressure change and the SLIL stresses in a computational model during wrist radioulnar deviation (RUD). Magnetic resonance imaging (MRI) scans were used to acquire the anatomical model of the carpal bones and ligament, while the kinematics of scaphoid and lunate were obtained through dynamic computerized tomography (CT) scans. A two-way fluid-structure interaction (FSI) was used to model the dynamics between the scaphoid and lunate, the SLIL, and the synovial fluid. The synovial fluid pressure change was found to be small (-4.86 to 3.23 Pa) and close to that simulated in a previous work without the SLIL (-1.68 to 2.64 Pa). Furthermore, peaks of maximum fluid pressure were found to trail the peaks of ligament stress. Therefore, it is suggested that the influence of synovial fluid pressure on the ligament in the SLIL model is negligible and simulations of the scapholunate joint could forego fluid-structure interactions. Future studies can instead explore other structures in the carpus that can possibly contribute to the ligament stresses. Clinically, treatments can be targeted at these areas to help prevent or slow the progression of ligament injuries into serious consequences like the degenerative joint disease.

Rule and Neural Network-Based Image Segmentation of Mice Vertebrae Images

Background

Image segmentation is a fundamental technique that allows researchers to process images from various sources into individual components for certain applications, such as visual or numerical evaluations. Image segmentation is beneficial when studying medical images for healthcare purposes. However, existing semantic image segmentation models like the U-net are computationally intensive. This work aimed to develop less complicated models that could still accurately segment images.

Methodology

Rule-based and linear layer neural network models were developed in Mathematica and trained on mouse vertebrae micro-computed tomography scans. These models were tasked with segmenting the cortical shell from the whole bone image. A U-net model was also set up for comparison.

Results

It was found that the linear layer neural network had comparable accuracy to the U-net model in segmenting the mice vertebrae scans.

Conclusions

This work provides two separate models that allow for automated segmentation of mouse vertebral scans, which could be potentially valuable in applications such as pre-processing the murine vertebral scans for further evaluations of the effect of drug treatment on bone micro-architecture.

Ontogenetic Patterning of Human Subchondral Bone Microarchitecture in the Proximal Tibia

High-resolution computed tomography images were acquired for 31 proximal human tibiae, age 8 to 37.5 years, from Norris Farms #36 cemetery site (A.D. 1300). Morphometric analysis of subchondral cortical and trabecular bone architecture was performed between and within the tibial condyles. Kruskal−Wallis and Wilcoxon signed-rank tests were used to examine the association between region, age, body mass, and each morphometric parameter. The findings indicate that age-related changes in mechanical loading have varied effects on subchondral bone morphology. With age, trabecular microstructure increased in bone volume fraction (p = 0.033) and degree of anisotropy (p = 0.012), and decreased in connectivity density (p = 0.001). In the subchondral cortical plate, there was an increase in thickness (p < 0.001). When comparing condylar regions, only degree of anisotropy differed (p = 0.004) between the medial and lateral condyles. Trabeculae in the medial condyle were more anisotropic than in the lateral region. This research represents an innovative approach to quantifying both cortical and trabecular subchondral bone microarchitecture in archaeological remains.

Enhancing the learning of evolutionary anthropology skills by combining student‐active teaching with actual and virtual immersion of Master's students in fieldwork, laboratory practice, and dissemination

Higher education in evolutionary anthropology involves providing students with in‐depth knowledge of biological and cultural heritage sites and collections that are frequently inaccessible. Indeed, most sites, fossils, and archaeological remains can be visited or manipulated only rarely and solely by specialists with extensive experience. Owing to the development of 3D and medical imaging techniques, this fragile heritage is now more widely accessible, and in a dynamic way. However, exclusive adoption of virtual teaching and learning has a negative impact on student engagement and, naturally, on exchanges with instructors, and thus cannot be used without some reservations. In the ITAP (Immersion dans les Terrains de l’Anthropologie biologique et de la Préhistoire) project of the higher education STEP (Soutien à la Transformation et à l’Expérimentation Pédagogiques) transformation program at the University of Bordeaux, we combine student‐active teaching with Master's students fully immersed in ongoing fieldwork, laboratory study, and dissemination of research results in order to develop more individually shaped learning curricula and to foster both professional and new interdisciplinary skills. Here, we present examples of experiments conducted in the ITAP project using both authentic and virtual collections of archaeological, experimental, and reference materials that help to break down the barriers between research activities and higher education, as well as providing a more general appraisal of the appropriate use of virtual tools in higher education by combining them with real‐life situations.

A computational framework for canonical holistic morphometric analysis of trabecular bone

Bone is a remarkable, living tissue that functionally adapts to external loading. Therefore, bone shape and internal structure carry information relevant to many disciplines, including medicine, forensic science, and anthropology. However, morphometric comparisons of homologous regions across different individuals or groups are still challenging. In this study, two methods were combined to quantify such differences: (1) Holistic morphometric analysis (HMA) was used to quantify morphometric values in each bone, (2) which could then be mapped to a volumetric mesh of a canonical bone created by a statistical free-form deformation model (SDM). Required parameters for this canonical holistic morphometric analysis (cHMA) method were identified and the robustness of the method was evaluated. The robustness studies showed that the SDM converged after one to two iterations, had only a marginal bias towards the chosen starting image, and could handle large shape differences seen in bones of different species. Case studies were performed on metacarpal bones and proximal femora of different primate species to confirm prior study results. The differences between species could be visualised and statistically analysed in both case studies. cHMA provides a framework for performing quantitative comparisons of different morphometric quantities across individuals or groups. These comparisons facilitate investigation of the relationship between spatial morphometric variations and function or pathology, or both.

Effects of reduced mobility on trabecular bone density in captive big cats

Bone responds to elevated mechanical loading by increasing in mass and density. Therefore, wild animals should exhibit greater skeletal mass and density than captive conspecifics. This expectation is pertinent to testing bone functional adaptation theories and to comparative studies, which commonly use skeletal remains that combine zoo and wild-caught specimens. Conservationists are also interested in the effects of captivity on bone morphology as it may influence rewilding success. We compared trabecular bone volume fraction (BVF) between wild and captive mountain lions, cheetahs, leopards and jaguars. We found significantly greater BVF in wild than in captive felids. Effects of captivity were more marked in the humerus than in the femur. A ratio of humeral/femoral BVF was also lower in captive animals and showed a positive relationship to home range size in wild animals. Results are consistent with greater forelimb than hindlimb loading during terrestrial travel, and possibly reduced loading of the forelimb associated with lack of predatory behaviour in captive animals. Thus, captivity among felids has general effects on BVF in the postcranial skeleton and location-specific effects related to limb use. Caution should be exercised when identifying skeletal specimens for use in comparative studies and when rearing animals for conservation purposes.

Growth and development of trabecular structure in the calcaneus of Japanese macaques (Macaca fuscata) reflects locomotor behavior, life history, and neuromuscular development

Bone structure dynamically adapts to its mechanical environment throughout ontogeny by altering the structure of trabecular bone, the three-dimensional mesh-like structure found underneath joint surfaces. Trabecular structure, then, can provide a record of variation in loading directions and magnitude; and in ontogenetic samples, it can potentially be used to track developmental shifts in limb posture. We aim to broaden the analysis of trabecular bone ontogeny by incorporating interactions between ontogenetic variation in locomotor repertoire, neuromuscular maturation, and life history. We examine the associations between these variables and age-related variation in trabecular structure in the calcaneus of Japanese macaques (Macaca fuscata). We used high-resolution micro-computed tomography scanning to image the calcaneus in a cross-sectional sample of 34 juvenile M. fuscata aged between 0 and 7 years old at the Primate Research Institute, Japan. We calculated whole bone averages of standard trabecular properties and generated whole-bone morphometric maps of bone volume fraction and Young's modulus. Trabecular structure becomes increasingly heterogeneous in older individuals. Bone volume fraction (BV/total volume [TV]) decreases during the first month of life and increases afterward, coinciding with the onset of independent locomotion in M. fuscata. At birth, primary Young's modulus is oriented orthogonal to the ossification center, but after locomotor onset bone structure becomes stiffest in the direction of joint surfaces and muscle attachments. Age-related variation in bone volume fraction is best predicted by an interaction between the estimated percentage of adult brain size, body mass, and locomotor onset. To explain our findings, we propose a model where interactions between age-related increases in body weight and maturation of the neuromuscular system alter the loading environment of the calcaneus, to which the internal trabecular structure dynamically adapts. This model cannot be directly tested based on our cross-sectional data. However, confirmation of the model by longitudinal experiments and in multiple species would show that trabecular structure can be used both to infer behavior from fossil morphology and serve as a valuable proxy for neuromuscular maturation and life history events like locomotor onset and the achievement of an adult-like gait. This approach could significantly expand our knowledge of the biology and behavior of fossil species.

A shrewd inspection of vertebral regionalization in large shrews (Soricidae: Crocidurinae)

The regionalization of the mammalian spinal column is an important evolutionary, developmental, and functional hallmark of the clade. Vertebral column regions are usually defined using transitions in external bone morphology, such as the presence of transverse foraminae or rib facets, or measurements of vertebral shape. Yet the internal structure of vertebrae, specifically the trabecular (spongy) bone, plays an important role in vertebral function, and is subject to the same variety of selective, functional, and developmental influences as external bone morphology. Here we investigated regionalization of external and trabecular bone morphology in the vertebral column of a group of shrews (family Soricidae). The primary goals of this study were to: 1) determine if vertebral trabecular bone morphology is regionalized in large shrews, and if so, in what configuration relative to external morphology; 2) assess correlations between trabecular bone regionalization and functional or developmental influences; and 3) determine if external and trabecular bone regionalization patterns provide clues about the function of the highly modified spinal column of the hero shrew Scutisorex.

Trabecular bone is regionalized along the soricid vertebral column, but the configuration of trabecular bone regions does not match that of the external vertebral morphology, and is less consistent across individuals and species. The cervical region has the most distinct and consistent trabecular bone morphology, with dense trabeculae indicative of the ability to withstand forces in a variety of directions. Scutisorex exhibits an additional external morphology region compared to unmodified shrews, but this region does not correspond to a change in trabecular architecture.

Although trabecular bone architecture is regionalized along the soricid vertebral column, and this regionalization is potentially related to bone functional adaptation, there are likely aspects of vertebral functional regionalization that are not detectable using trabecular bone morphology. For example, the external morphology of the Scutisorex lumbar spine shows signs of an extra functional region that is not apparent in trabecular bone analyses. It is possible that body size and locomotor mode affect the degree to which function is manifest in trabecular bone, and broader study across mammalian size and ecology is warranted to understand the relationship between trabecular bone morphology and other measures of vertebral function such as intervertebral range of motion.

Ontogenetic changes to metacarpal trabecular bone structure in mountain and western lowland gorillas

The trabecular bone morphology of adult extant primates has been shown to reflect mechanical loading related to locomotion. However, ontogenetic studies of humans and other mammals suggest an adaptive lag between trabecular bone response and current mechanical loading patterns that could result in adult trabecular bone morphology reflecting juvenile behaviours. This study investigates ontogenetic changes in the trabecular bone structure of the third metacarpal of mountain gorillas (Gorilla beringei beringei; n = 26) and western lowland gorillas (Gorilla gorilla gorilla; n = 26) and its relationship to expected changes in locomotor loading patterns. Results show that trabecular bone reflects predicted mechanical loading throughout ontogeny. Bone volume fraction, trabecular thickness and trabecular number are low at birth and increase with age, although degree of anisotropy remains relatively stable throughout ontogeny. A high concentration of bone volume fraction can be observed in the distopalmar region of the third metacarpal epiphysis in early ontogeny, consistent with the high frequency of climbing, suspensory and other grasping behaviours in young gorillas. High trabecular bone concentration increases dorsally in the epiphysis during the juvenile period as terrestrial knuckle-walking becomes the primary form of locomotion. However, fusion of the epiphysis does not take place until 10-11 years of age, and overall trabecular structure does not fully reflect the adult pattern until 12 years of age, indicating a lag between adult-like behaviours and adult-like trabecular morphology. We found minimal differences in trabecular ontogeny between mountain and western lowland gorillas, despite presumed variation in the frequencies of arboreal locomotor behaviours. Altogether, ontogenetic changes in Gorilla metacarpal trabecular structure reflect overall genus-level changes in locomotor behaviours throughout development, but with some ontogenetic lag that should be considered when drawing functional conclusions from bone structure in extant or fossil adolescent specimens.

Sesamoid bones also show functional adaptation in their microanatomy-The example of the patella in Perissodactyla

The patella is the largest sesamoid bone of the skeleton. It is strongly involved in the knee, improving output force and velocity of the knee extensors, and thus plays a major role in locomotion and limb stability. However, the relationships between its structure and functional constraints, that would enable a better understanding of limb bone functional adaptations, are poorly known. This contribution proposes a comparative analysis, both qualitative and quantitative, of the microanatomy of the whole patella in perissodactyls, which show a wide range of morphologies, masses, and locomotor abilities, in order to investigate how the microanatomy of the patella adapts to evolutionary constraints. The inner structure of the patella consists of a spongiosa surrounded by a compact cortex. Contrary to our expectations, there is no increase in compactness with bone size, and thus body size and weight, but only an increase in the tightness of the spongiosa. No particular thickening of the cortex associated with muscle insertions is noticed but a strong thickening is observed anteriorly at about mid-length, where the strong intermediate patellar ligament inserts. The trabeculae are mainly oriented perpendicularly to the posterior articular surface, which highlights that the main stress is anteroposteriorly directed, maintaining the patella against the femoral trochlea. Conversely, anteriorly, trabeculae are rather circumferentially oriented, following the insertion of the patellar ligament and, possibly also, of the quadriceps tendon. A strong variation is observed among perissodactyl families but also intraspecifically, which is in accordance with previous studies suggesting a higher variability in sesamoid bones. Clear trends are nevertheless observed between the three families. Equids have a much thinner cortex than ceratomorphs. Rhinos and equids, both characterized by a development of the medial border, show an increase in trabecular density laterally suggesting stronger stresses laterally. The inner structure in tapirs is more homogeneous despite the absence of medial development of the medial border with no "compensation" of the inner structure, which suggests different stresses on their knees associated with a different morphology of their patellofemoral joint.

Improving the Management of Patients with Osteoporosis Undergoing Spinal Fusion: The Need for a Bone Mineral Density-Matched Interbody Cage

With an increasingly aging population globally, a confluence has emerged between the rising prevalence of degenerative spinal disease and osteoporosis. Fusion of the anterior spinal column remains the mainstay surgical intervention for many spinal degenerative disorders. However, decreased vertebral bone mineral density (BMD), quantitatively measured by dual x-ray absorptiometry (DXA), complicates treatment with surgical interbody fusion as weak underlying bone stock increases the risk of post-operative implant-related adverse events, including cage subsidence. There is a necessity for developing cages with advanced structural designs that incorporate bioengineering and architectural principles to tailor the interbody fusion device directly to the patient’s BMD status. Specifically, lattice-designed cages that mimic the web-like structure of native cancellous bone have demonstrated excellent resistance to post-operative subsidence. This article provides an introductory profile of a spinal interbody implant designed intentionally to simulate the lattice structure of human cancellous bone, with a similar modulus of elasticity, and specialized to match a patient’s bone status across the BMD continuum. The implant incorporates an open pore design where the degree of pore compactness directly corresponds to the patient’s DXA-defined BMD status, including patients with osteoporosis.

Integrative Approach Uncovers New Patterns of Ecomorphological Convergence in Slow Arboreal Xenarthrans

Identifying ecomorphological convergence examples is a central focus in evolutionary biology. In xenarthrans, slow arboreality independently arose at least three times, in the two genera of ‘tree sloths’, Bradypus and Choloepus, and the silky anteater, Cyclopes. This specialized locomotor ecology is expectedly reflected by distinctive morpho-functional convergences. Cyclopes, although sharing several ecological features with ‘tree sloths’, do not fully mirror the latter in their outstandingly similar suspensory slow arboreal locomotion. We hypothesized that the morphology of Cyclopes is closer to ‘tree sloths’ than to anteaters, but yet distinct, entailing that slow arboreal xenarthrans evolved through ‘incomplete’ convergence. In a multivariate trait space, slow arboreal xenarthrans are hence expected to depart from their sister taxa evolving toward the same area, but not showing extensive phenotypical overlap, due to the distinct position of Cyclopes. Conversely, a pattern of ‘complete’ convergence (i.e., widely overlapping morphologies) is hypothesized for ‘tree sloths’. Through phylogenetic comparative methods, we quantified humeral and femoral convergence in slow arboreal xenarthrans, including a sample of extant and extinct non-slow arboreal xenarthrans. Through 3D geometric morphometrics, cross-sectional properties (CSP) and trabecular architecture, we integratively quantified external shape, diaphyseal anatomy and internal epiphyseal structure. Several traits converged in slow arboreal xenarthrans, especially those pertaining to CSP. Phylomorphospaces and quantitative convergence analyses substantiated the expected patterns of ‘incomplete’ and ‘complete’ convergence for slow arboreal xenarthrans and ‘tree sloths’, respectively. This work, highlighting previously unidentified convergence patterns, emphasizes the value of an integrative multi-pronged quantitative approach to cope with complex mechanisms underlying ecomorphological convergence.

Three-dimensional surface morphometry differentiates behaviour on primate percussive stone tools

The Early Stone Age record preserves a rich behavioural signature of hominin stone tool making and use. The role of percussive technology in the daily subsistence strategies of our earliest ancestors has seen renewed focus recently. Studies of modern primate tool use highlight the diverse range of behaviours potentially associated with percussive technology. This has prompted significant methodological developments to characterize the associated damage marks (use-wear) on hammerstones and anvils. Little focus has, however, been paid to identifying whether these techniques can successfully differentiate between the damage patterns produced by specific and differing percussive behaviours. Here, we present a novel workflow drawing on the strengths of visual identification and three-dimensional (3D) surface quantification of use-wear. We apply this methodology firstly to characterize macaque percussive use-wear and test the efficacy of 3D surface quantification techniques in differentiating between percussive damage and natural surface topography. Secondly, we use this method to differentiate between use-wear associated with various wild macaque percussive behaviours. By combining analyst-directed, 3D surface analysis and use-wear dimensional analysis, we show that macaque percussive behaviours create specific diagnostic signatures and highlight a means of quantifiably recording such behavioural signatures in both primate and hominin contexts.

Effect of captivity on the vertebral bone microstructure of xenarthran mammals

Captive specimens in museum collections facilitate study of rare taxa, but the lifestyles, diets, and lifespans of captive animals differ from their wild counterparts. Trabecular bone architecture adapts to in vivo forces, and may reflect interspecific variation in ecology and behavior as well as intraspecific variation between captive and wild specimens. We compared trunk vertebrae bone microstructure in captive and wild xenarthran mammals to test the effects of ecology and captivity. We collected μCT scans of the last six presacral vertebrae in 13 fossorial, terrestrial, and suspensorial xenarthran species (body mass: 120 g to 35 kg). For each vertebra, we measured centrum length; bone volume fraction (BV.TV); trabecular number and mean thickness (Tb.Th); global compactness (GC); cross-sectional area; mean intercept length; star length distribution; and connectivity and connectivity density. Wild specimens have more robust trabeculae, but this varies with species, ecology, and pathology. Wild specimens of fossorial taxa (Dasypus) have more robust trabeculae than captives, but there is no clear difference in bone microstructure between wild and captive specimens of suspensorial taxa (Bradypus, Choloepus), suggesting that locomotor ecology influences the degree to which captivity affects bone microstructure. Captive Tamandua and Myrmecophaga have higher BV.TV, Tb.Th, and GC than their wild counterparts due to captivity-caused bone pathologies. Our results add to the understanding of variation in mammalian bone microstructure, suggest caution when including captive specimens in bone microstructure research, and indicate the need to better replicate the habitats, diets, and behavior of animals in captivity.

Architecture of the cancellous bone in human proximal tibia based on P45 sectional plastinated specimens

PURPOSE

To reveal differences in the pattern of trabecular architecture in the epiphysis and metaphysis of the proximal tibia.

METHODS

The trabecular architecture of the proximal tibia was observed in 27 P45 plastinated knee specimens.

RESULTS

In the medial and lateral condyles, under the articular cartilage surrounded by the medial or lateral meniscus, the cancellous bone is formed by thick and dense trabecular bands, which run longitudinally in the epiphysis and then pass through the epiphyseal line to terminate on the slanted cortex of the metaphysis. In the intercondylar eminence, the trabeculae are arranged basically in a network. In the central portion of the tibial metaphysis, cancellous bone consists of fine arcuate trabeculae, which extend to the anterior and posterior cortices, respectively. These trabeculae are intersected sparsely and form trusses over the medullary cavity. Near the areas of attachment of the iliotibial tract, tibial collateral ligament, anterior and posterior cruciate ligaments, and patellar ligament, the cancellous bone is locally reinforced with patchy trabeculae, dense radiating trabeculae, or two orthotropic trabecular bands.

CONCLUSION

This study provides further accurate anatomical information on the trabeculae of the proximal tibia. The soft structures of knee joint, including the articular cartilage, menisci, and ligaments, and the slanted cortices of the metaphysis are important landmarks for the location of different arrangements of the cancellous architecture. The present results are beneficial for clinical diagnosis and treatment of pathologies of the knee joint, or the establishment of a finite element analysis model of the knee joint.

Consistent inconsistencies in braking: a spatial analysis

The dynamic system that is the bipedal body in motion is of interest to engineers, clinicians and biological anthropologists alike. Spatial statistics is more familiar to public health researchers as a way of analysing disease clustering and spread; nonetheless, this is a practical approach to the two-dimensional topography of the foot. We quantified the clustering of the centre of pressure (CoP) on the foot for peak braking and propulsive vertical ground reaction forces (GRFs) over multiple, contiguous steps to assess the consistency of the location of peak forces on the foot during walking. The vertical GRFs of 11 participants were collected continuously via a wireless insole system (MoticonReGo AG) across various experimental conditions. We hypothesized that CoPs would cluster in the hindfoot for braking and forefoot for propulsion, and that braking would demonstrate more consistent clustering than propulsion. Contrary to our hypotheses, we found that CoPs during braking are inconsistent in their location, and CoPs during propulsion are more consistent and clustered across all participants and all trials. These results add to our understanding of the applied forces on the foot so that we can better predict fatigue failures and better understand the mechanisms that shaped the modern bipedal form.

Trabecular structure of the elbow reveals divergence in knuckle-walking biomechanical strategies of African apes

African apes engage in a distinct form of locomotion called knuckle-walking, but there is much ambiguity as to when and how this locomotor behavior evolved. This study aims to elucidate potential differences in knuckle-walking elbow posture and loading in African apes through the study of trabecular bone. Using a whole-epiphysis approach, we quantified variation in the trabecular structure of the distal humerus of chimpanzees, western lowland gorillas, and mountain gorillas in comparison to orang-utans, siamangs, and a sample of Old and New World monkeys. Results demonstrate differences in the distribution of trabecular bone within the distal humerus that are consistent across taxa that habitually use a flexed-elbow posture in comparison to those that use an extended elbow during locomotion. Western lowland gorillas show an extended-elbow pattern consistent with the straight forelimb position during knuckle-walking, whereas chimpanzees show a flexed-elbow pattern. Unexpectedly, mountain gorillas show an intermediate pattern between their western counterparts and chimpanzees. The differences found in elbow joint posture between chimpanzees and gorillas, and between gorilla species, point to diversification in the knuckle-walking biomechanical strategies among African apes, which has implications in the debate regarding the locomotor behavior from which human bipedalism arose.

Anatomic study of fibrous structures attached to the volar ulnar corner of the radius: implications in the volar rim fracture

This study aimed to clarify the bone and soft tissue morphological features at the volar ulnar corner of the radius. Micro-computed tomography, macroscopic and histological analyses were conducted using 12 cadaveric wrists, and in vivo MRI studies of the wrist were evaluated in five healthy volunteers. The volar ulnar corner of the distal radius has a protrusion volar to the sigmoid notch. The capsule elements of the radiolunate and radioulnar joints merge and this conjoined capsule attaches to the radius at the ulnar protrusion. Histologically, this capsule attaches to the radius via fibrocartilage, with fibres running in the radioulnar direction. In-vivo MRI studies showed that the capsule attaching to the volar ulnar corner could be traced to the dorsal side of the ulnar styloid. Our findings indicate that, given the direction of the fibres, an avulsion force in the radioulnar direction could be a cause for volar rim fractures.

Cortical and trabecular morphometric properties of the human calvarium

There is currently a gap in the literature that quantitatively describes the complex bone microarchitecture within the diploë (trabecular bone) and cortical layers of the human calvarium. The purpose of this study was to determine the morphometric properties of the diploë and cortical tables of the human calvarium in which key interacting factors of sex, location on the calvarium, and layers of the sandwich structure were considered. Micro-computed tomography (micro-CT) was utilized to capture images at 18 μm resolution of male (n = 26) and female (n = 24) embalmed calvarium specimens in the frontal and parietal regions (N = 50). All images were post-processed and analyzed using vendor bundled CT-Analyzer software to determine the morphometric properties of the diploë and cortical layers. A two-way mixed (repeated measures) analysis of variance (ANOVA) was used to determine diploë morphometric properties accounting for factors of sex and location. A three-way mixed ANOVA was performed to determine cortical morphometric properties accounting for factors of cortical layer (inner and outer table), sex, and location. The study revealed no two-way interaction effects between sex and location on the diploë morphometry except for fractal dimension. Trabecular thickness and separation in the diploë were significantly greater in the male specimens; however, females showed a greater number of trabeculae and fractal dimension on average. Parietal specimens revealed a greater porosity, trabecular separation, and deviation from an ideal plate structure, but a lesser number of trabeculae and connectivity compared to the frontal location. Additionally, the study observed a lower density and greater porosity in the inner cortical layer than the outer which may be due to clear distinctions between each layer's physiological environment. The study provides valuable insight into the quantitative morphometry of the calvarium in which finite element modelers of the skull can refer to when designing detailed heterogenous or subject-specific skull models to effectively predict injury. Furthermore, this study contributes towards the recent developments on physical surrogate models of the skull which require approximate measures of calvarium bone architecture in order to effectively fabricate a model and then accurately simulate a traumatic head impact event.

Truss implant technology™ for interbody fusion in spinal degenerative disorders: profile of advanced structural design, mechanobiologic and performance characteristics

Introduction: Interbody fusion devices are customarily used in fusion of the anterior spinal column for treatment of degenerative disc disease. Their traditional role is to reestablish and maintain intervertebral disc height, contain bone graft and provide mechanical support for the spine while osseointegration takes place. Utilizing the principles of mechanobiology, a unique biokinetic interbody fusion device has been developed that employs an advanced structural design to facilitate and actively participate in the fusion consolidation process.Areas covered: This article profiles and characterizes 4WEB Medical's Truss Implant Technology™ which includes a range of 3D-printed titanium spinal interbody implants and non-spinal implants whose design is based on truss structures enabled by advances in additive manufacturing. Four main areas of the implant design and functionality are detailed: bio-architecture, mechanobiologic underpinnings, bioactive surface features, and subsidence resistance. Pre-clinical and clinical examples are provided to describe and specify the bioactive roles and contributions of each design feature.Expert opinion: The distinct and unique combination of features incorporated within the truss cage design results in a biokinetic implant that actively participates in the bone healing cascade and fusion process.