Compensation of spatial and temporal dispersion for acousto-optic multiphoton laser-scanning microscopy

Energy-efficient dispersion compensation for digital micromirror device

Due to the wave nature of light, the diffraction pattern generated by an optical device is sensitive to the shift of wavelength. This fact significantly compromises the digital micromirror device (DMD) in applications, such as full-color holographic display and multi-color fluorescence microscopy. The existing dispersion compensation techniques for DMD involve adding diffractive elements, which causes a large amount of waste of optical energy. Here, we propose an energy-efficient dispersion compensation method, based on a dispersive prism, for DMD. This method simulates the diffraction pattern of the optical fields reflected from the DMD with an angular spectrum model. According to the simulation, a prism and a set of optical components are introduced to compensate for the angular dispersion of DMD-modulated optical fields. In the experiment, our method reduced the angular dispersion, between the 532 nm and 660 nm light beams, by a factor of ∼8.5.

Acousto-optic holography for pseudo-two-dimensional dynamic light patterning

Optical systems use acousto-optic deflectors (AODs) mostly for fast angular scanning and spectral filtering of laser beams. However, AODs may transform laser light in much broader ways. When time-locked to the pulsing of low repetition rate laser amplifiers, AODs permit the holographic reconstruction of 1D and pseudo-two-dimensional (ps2D) intensity objects of rectangular shape by controlling the amplitude and phase of the light field at high (20-200 kHz) rates for microscopic light patterning. Using iterative Fourier transformations (IFTs), we searched for AOD-compatible holograms to reconstruct the given ps2D target patterns through either phase-only or complex light field modulation. We previously showed that phase-only holograms can adequately render grid-like patterns of diffraction-limited points with non-overlapping diffraction orders, while side lobes to the target pattern can be cured with an apodization mask. Dense target patterns, in contrast, are typically encumbered by apodization-resistant speckle noise. Here, we show the denoised rendering of dense ps2D objects by complex acousto-optic holograms deriving from simultaneous optimization of the amplitude and phase of the light field. Target patterns lacking ps2D symmetry, although not translatable into single holograms, were accessed by serial holography based on a segregation into ps2D-compatible components. The holograms retrieved under different regularizations were experimentally validated in an AOD random-access microscope. IFT regularizations characterized in this work extend the versatility of acousto-optic holography for fast dynamic light patterning.

Modeling and optimization of galvanometric point-scanning temporal dynamics

Galvanometers are ubiquitous in point-scanning applications in optical imaging, display, ranging, manufacturing, and therapeutic technologies. However, galvanometer performance is constrained by finite response times related to mirror size and material properties. We present a model-driven approach for optimizing galvanometer response characteristics by tuning the parameters of the closed-loop galvanometer controller and demonstrate settling time reduction by over 50%. As an imaging proof-of-concept, we implement scan waveforms that take advantage of the optimized galvanometer frequency response to increase linear field-of-view, signal-to-noise ratio, contrast-to-noise ratio, and speed. The hardware methods presented may be directly implemented on galvanometer controllers without the need for specialized equipment and used in conjunction with customized scan waveforms to further optimize scanning performance.

Compact and adjustable compensator for AOD spatial and temporal dispersion using off-the-shelf components

Random access multiphoton microscopy using two orthogonal acousto-optic deflectors (AODs) allows sampling only particular regions of interest within a plane, greatly speeding up the sampling rate. AODs introduce spatial and temporal dispersions, which distort the point spread function and decrease the peak intensity of the pulse. Both of these effects can be compensated for with a single dispersive element placed a distance before the AODs. An additional acousto-optic modulator, a custom cut prism, and a standard prism used with additional cylindrical optics have been demonstrated. All of these introduce additional cost or complexity and require an extended path length to achieve the needed negative group delay dispersion (GDD). By introducing a telescope between a transmission grating and the AODs, we correct for spatial and temporal dispersions in a compact design using only off-the-shelf components, and we show that the GDD can be tuned by translation of the telescope without adjustment of any other elements.

Seeing Natural Images through the Eye of a Fly with Remote Focusing Two-Photon Microscopy

Visual systems of many animals, including the fruit fly Drosophila, represent the surrounding space as 2D maps, formed by populations of neurons. Advanced genetic tools make the fly visual system especially well accessible. However, in typical in vivo preparations for two-photon calcium imaging, relatively few neurons can be recorded at the same time. Here, we present an extension to a conventional two-photon microscope, based on remote focusing, which enables real-time rotation of the imaging plane, and thus flexible alignment to cellular structures, without resolution or speed trade-off. We simultaneously record from over 100 neighboring cells spanning the 2D retinotopic map. We characterize its representation of moving natural images, which we find is comparable to noise predictions. Our method increases throughput 10-fold and allows us to visualize a significant fraction of the fly's visual field. Furthermore, our system can be applied in general for a more flexible investigation of neural circuits.

Input Shaping Based on an Experimental Transfer Function for an Electrostatic Microscanner in a Quasistatic Mode

This paper describes an input shaping method based on an experimental transfer function to effectively obtain a desired scan output for an electrostatic microscanner driven in a quasistatic mode. This method features possible driving extended to a higher frequency, whereas the conventional control needs dynamic modeling and is still ineffective in mitigating harmonics, sub-resonances, and/or higher modes. The performance of the input shaping was experimentally evaluated in terms of the usable scan range (USR), and its application limits were examined with respect to the optical scan angle and frequency. The experimental results showed that the usable scan range is as wide as 96% for a total optical scan angle (total OSA) of up to 9° when the criterion for scan line error is 1.5%. The usable scan ranges were degraded for larger total optical scan angles because of the nonlinear electrostatic torque with respect to the driving voltage. The usable scan range was 90% or higher for most frequencies up to 160 Hz and was drastically decreased for the higher driving frequency because fewer harmonics are included in the input shaping process. Conclusively, the proposed method was experimentally confirmed to show good performance in view of its simplicity and its operable range, quantitatively compared with that of the conventional control.

Quasi-simultaneous multiplane calcium imaging of neuronal circuits

Two-photon excitation fluorescence microscopy is widely used to study the activity of neuronal circuits. However, the fast imaging is typically constrained to a single lateral plane for a standard microscope design. Given that cortical neuronal networks in a mouse brain are complex three-dimensional structures organised in six histologically defined layers which extend over many hundreds of micrometres, there is a strong demand for microscope systems that can record neuronal signalling in volumes. Henceforth, we developed a quasi-simultaneous multiplane imaging technique combining an acousto-optic deflector and static remote focusing to provide fast imaging of neurons from different axial positions inside the cortical layers without the need for mechanical disturbance of either the objective lens or the specimen. The hardware and the software are easily adaptable to existing two-photon microscopes. Here, we demonstrated that our imaging method can record, at high speed and high image contrast, the calcium dynamics of neurons in two different imaging planes separated axially with the in-focus and the refocused planes 120 µm and 250 µm below the brain surface respectively.

Rapid acousto-optic focus tuning for improvement of imaging performance in confocal microscopy [Invited]

We demonstrate the application of focus-tunable acousto-optic lens technology in confocal microscopy for a high-speed axial scanning of the object. The advantages of the proposed approach include high axial scan rate, no mechanical sample movement, no additional non-symmetric aberrations, and the control of the effective depth of focus. The acousto-optic lens operating at the focus tuning rate of 300 kHz is developed and implemented in scanning laser confocal microscopy. The performance of the instrumentation is presented using test targets. Rapid focus tuning may enhance in vivo three-dimensional imaging in confocal microscopy.

Anticipating, measuring, and minimizing MEMS mirror scan error to improve laser scanning microscopy's speed and accuracy

We describe a method to speed up microelectromechanical system (MEMS) mirror scanning by > 20x, while also improving scan accuracy. We use Landweber deconvolution to determine an input voltage which would produce a desired output, based on the measured MEMS impulse response. Since the MEMS is weakly nonlinear, the observed behavior deviates from expectations, and we iteratively improve our input to minimize this deviation. This allows customizable MEMS angle vs. time with <1% deviation from the desired scan pattern. We demonstrate our technique by optimizing a point scanning microscope's raster patterns to image mammal submandibular gland and pollen at ~10 frames/s.

SmartScope2: Simultaneous Imaging and Reconstruction of Neuronal Morphology

Quantitative analysis of neuronal morphology is critical in cell type classification and for deciphering how structure gives rise to function in the brain. Most current approaches to imaging and tracing neuronal 3D morphology are data intensive. We introduce SmartScope2, the first open source, automated neuron reconstruction machine integrating online image analysis with automated multiphoton imaging. SmartScope2 takes advantage of a neuron’s sparse morphology to improve imaging speed and reduce image data stored, transferred and analyzed. We show that SmartScope2 is able to produce the complex 3D morphology of human and mouse cortical neurons with six-fold reduction in image data requirements and three times the imaging speed compared to conventional methods.

Technologies for imaging neural activity in large volumes

Neural circuitry has evolved to form distributed networks that act dynamically across large volumes. Conventional microscopy collects data from individual planes and cannot sample circuitry across large volumes at the temporal resolution relevant to neural circuit function and behaviors. Here we review emerging technologies for rapid volume imaging of neural circuitry. We focus on two critical challenges: the inertia of optical systems, which limits image speed, and aberrations, which restrict the image volume. Optical sampling time must be long enough to ensure high-fidelity measurements, but optimized sampling strategies and point-spread function engineering can facilitate rapid volume imaging of neural activity within this constraint. We also discuss new computational strategies for processing and analyzing volume imaging data of increasing size and complexity. Together, optical and computational advances are providing a broader view of neural circuit dynamics and helping elucidate how brain regions work in concert to support behavior.

Advances in two photon scanning and scanless microscopy technologies for functional neural circuit imaging

Recent years have seen substantial developments in technology for imaging neural circuits, raising the prospect of large scale imaging studies of neural populations involved in information processing, with the potential to lead to step changes in our understanding of brain function and dysfunction. In this article we will review some key recent advances: improved fluorophores for single cell resolution functional neuroimaging using a two photon microscope; improved approaches to the problem of scanning active circuits; and the prospect of scanless microscopes which overcome some of the bandwidth limitations of current imaging techniques. These advances in technology for experimental neuroscience have in themselves led to technical challenges, such as the need for the development of novel signal processing and data analysis tools in order to make the most of the new experimental tools. We review recent work in some active topics, such as region of interest segmentation algorithms capable of demixing overlapping signals, and new highly accurate algorithms for calcium transient detection. These advances motivate the development of new data analysis tools capable of dealing with spatial or spatiotemporal patterns of neural activity, that scale well with pattern size.

Compensation of spatial dispersion of an acousto-optic deflector with a special Keplerian telescope

Compensation of spatial dispersion caused by the acousto-optic deflector (AOD) when using a femtosecond laser is difficult across the whole scanning range of the system, and this is a significant impediment to its use. In conventional methods, the dispersion of the AOD was compensated only when it was at a particular position, while at other positions, the quality of the light beam was reduced. We developed a novel method for compensating the spatial dispersion within the entire scanning range using a special Keplerian telescope. Our experimental results show that the residual dispersion of the AOD is compensated sufficiently, and the focal spots of the laser reach the diffraction limit within a 40-MHz ultrasound bandwidth.

In vivo sub-femtoliter resolution photoacoustic microscopy with higher frame rates

Microscopy based on non-fluorescent absorption dye staining is widely used in various fields of biomedicine for 400 years. Unlike its fluorescent counterpart, non-fluorescent absorption microscopy lacks proper methodologies to realize its in vivo applications with a sub-femtoliter 3D resolution. Regardless of the most advanced high-resolution photoacoustic microscopy, sub-femtoliter spatial resolution is still unattainable, and the imaging speed is relatively slow. In this paper, based on the two-photon photoacoustic mechanism, we demonstrated a in vivo label free laser-scanning photoacoustic imaging modality featuring high frame rates and sub-femtoliter 3D resolution simultaneously, which stands as a perfect solution to 3D high resolution non-fluorescent absorption microscopy. Furthermore, we first demonstrated in vivo label-free two-photon acoustic microscopy on the observation of non-fluorescent melanin distribution within mouse skin.

Random-Access Multiphoton Microscopy for Fast Three-Dimensional Imaging

Studies in several important areas of neuroscience, including analysis of single neurons as well as neural networks, continue to be limited by currently available experimental tools. By combining molecular probes of cellular function, such as voltage-sensitive or calcium-sensitive dyes, with advanced microscopy techniques such as multiphoton microscopy, experimental neurophysiologists have been able to partially reduce this limitation. These approaches usually provide the needed spatial resolution along with convenient optical sectioning capabilities for isolating regions of interest. However, they often fall short in providing the necessary temporal resolution, primarily due to their restrained laser scanning mechanisms. In this regard, we review a method of laser scanning for multiphoton microscopy that overcomes the temporal limitations of pervious approaches and allows for what is known as 3D Random Access Multiphoton (3D RAMP) microscopy, an imaging technique that supports full three dimensional recording of many sites of interest on physiologically relevant time scales.

Non-descanned multifocal multiphoton microscopy with a multianode photomultiplier tube

Multifocal multiphoton microscopy (MMM) improves imaging speed over a point scanning approach by parallelizing the excitation process. Early versions of MMM relied on imaging detectors to record emission signals from multiple foci simultaneously. For many turbid biological specimens, the scattering of emission photons results in blurred images and degrades the signal-to-noise ratio (SNR). We have recently demonstrated that a multianode photomultiplier tube (MAPMT) placed in a descanned configuration can effectively collect scattered emission photons from each focus into their corresponding anodes significantly improving image SNR for highly scattering specimens. Unfortunately, a descanned MMM has a longer detection path resulting in substantial emission photon loss. Optical design constraints in a descanned geometry further results in significant optical aberrations especially for large field-of-view (FOV), high NA objectives. Here, we introduce a non-descanned MMM based on MAPMT that substantially overcomes most of these drawbacks. We show that we improve signal efficiency up to fourfold with limited image SNR degradation due to scattered emission photons. The excitation foci can also be spaced wider to cover the full FOV of the objective with minimal aberrations. The performance of this system is demonstrated by imaging interneuron morphological structures deep in the brains of living mice.

WONOEP appraisal: molecular and cellular imaging in epilepsy

Great advancements have been made in understanding the basic mechanisms of ictogenesis using single-cell electrophysiology (e.g., patch clamp, sharp electrode), large-scale electrophysiology (e.g., electroencephalography [EEG], field potential recording), and large-scale imaging (magnetic resonance imaging [MRI], positron emission tomography [PET], calcium imaging of acetoxymethyl ester [AM] dye-loaded tissue). Until recently, it has been challenging to study experimentally how population rhythms emerge from cellular activity. Newly developed optical imaging technologies hold promise for bridging this gap by making it possible to simultaneously record the many cellular elements that comprise a neural circuit. Furthermore, easily accessible genetic technologies for targeting expression of fluorescent protein-based indicators make it possible to study, in animal models of epilepsy, epileptogenic changes to neural circuits over long periods. In this review, we summarize some of the latest imaging tools (fluorescent probes, gene delivery methods, and microscopy techniques) that can lead to the advancement of cell- and circuit-level understanding of epilepsy, which in turn may inform and improve development of next generation antiepileptic and antiepileptogenic drugs.

Nonlinear optical microscopy for immunoimaging: a custom optimized system of high-speed, large-area, multicolor imaging

BACKGROUND

The nonlinear optical microscopy has become the current state-of-the-art for intravital imaging. Due to its advantages of high resolution, superior tissue penetration, lower photodamage and photobleaching, as well as intrinsic z-sectioning ability, this technology has been widely applied in immunoimaging for a decade. However, in terms of monitoring immune events in native physiological environment, the conventional nonlinear optical microscope system has to be optimized for live animal imaging. Generally speaking, three crucial capabilities are desired, including high-speed, large-area and multicolor imaging. Among numerous high-speed scanning mechanisms used in nonlinear optical imaging, polygon scanning is not only linearly but also dispersion-freely with high stability and tunable rotation speed, which can overcome disadvantages of multifocal scanning, resonant scanner and acousto-optical deflector (AOD). However, low frame rate, lacking large-area or multicolor imaging ability make current polygonbased nonlinear optical microscopes unable to meet the requirements of immune event monitoring.

METHODS

We built up a polygon-based nonlinear optical microscope system which was custom optimized for immunoimaging with high-speed, large-are and multicolor imaging abilities.

RESULTS

Firstly, we validated the imaging performance of the system by standard methods. Then, to demonstrate the ability to monitor immune events, migration of immunocytes observed by the system based on typical immunological models such as lymph node, footpad and dorsal skinfold chamber are shown. Finally, we take an outlook for the possible advance of related technologies such as sample stabilization and optical clearing for more stable and deeper intravital immunoimaging.

CONCLUSIONS

This study will be helpful for optimizing nonlinear optical microscope to obtain more comprehensive and accurate information of immune events.

Two-Photon Excitation of Fluorescent Voltage-Sensitive Dyes: Monitoring Membrane Potential in the Infrared

Functional imaging microscopy based on voltage-sensitive dyes (VSDs) has proven effective for revealing spatio-temporal patterns of activity in vivo and in vitro. Microscopy based on two-photon excitation of fluorescent VSDs offers the possibility of recording sub-millisecond membrane potential changes on micron length scales in cells that lie upwards of one millimeter below the brain's surface. Here we describe progress in monitoring membrane voltage using two-photon excitation (TPE) of VSD fluorescence, and detail an application of this emerging technology in which action potentials were recorded in single trials from individual mammalian nerve terminals in situ. Prospects for, and limitations of this method are reviewed.

Video-rate resonant scanning multiphoton microscopy: An emerging technique for intravital imaging of the tumor microenvironment

The abnormal tumor microenvironment fuels tumor progression, metastasis, immune suppression, and treatment resistance. Over last several decades, developments in and applications of intravital microscopy have provided unprecedented insights into the dynamics of the tumor microenvironment. In particular, intravital multiphoton microscopy has revealed the abnormal structure and function of tumor-associated blood and lymphatic vessels, the role of aberrant tumor matrix in drug delivery, invasion and metastasis of tumor cells, the dynamics of immune cell trafficking to and within tumors, and gene expression in tumors. However, traditional multiphoton microscopy suffers from inherently slow imaging rates-only a few frames per second, thus unable to capture more rapid events such as blood flow, lymphatic flow, and cell movement within vessels. Here, we report the development and implementation of a video-rate multiphoton microscope (VR-MPLSM) based on resonant galvanometer mirror scanning that is capable of recording at 30 frames per second and acquiring intravital multispectral images. We show that the design of the system can be readily implemented and is adaptable to various experimental models. As examples, we demonstrate the utility of the system to directly measure flow within tumors, capture metastatic cancer cells moving within the brain vasculature and cells in lymphatic vessels, and image acute responses to changes in a vascular network. VR-MPLSM thus has the potential to further advance intravital imaging and provide new insight into the biology of the tumor microenvironment.

High-throughput nonlinear optical microscopy

High-resolution microscopy methods based on different nonlinear optical (NLO) contrast mechanisms are finding numerous applications in biology and medicine. While the basic implementations of these microscopy methods are relatively mature, an important direction of continuing technological innovation lies in improving the throughput of these systems. Throughput improvement is expected to be important for studying fast kinetic processes, for enabling clinical diagnosis and treatment, and for extending the field of image informatics. This review will provide an overview of the fundamental limitations on NLO microscopy throughput. We will further cover several important classes of high-throughput NLO microscope designs with discussions on their strengths and weaknesses and their key biomedical applications. Finally, this review will close with a perspective of potential future technological improvements in this field.

Reassignment of scattered emission photons in multifocal multiphoton microscopy

Multifocal multiphoton microscopy (MMM) achieves fast imaging by simultaneously scanning multiple foci across different regions of specimen. The use of imaging detectors in MMM, such as CCD or CMOS, results in degradation of image signal-to-noise-ratio (SNR) due to the scattering of emitted photons. SNR can be partly recovered using multianode photomultiplier tubes (MAPMT). In this design, however, emission photons scattered to neighbor anodes are encoded by the foci scan location resulting in ghost images. The crosstalk between different anodes is currently measured a priori, which is cumbersome as it depends specimen properties. Here, we present the photon reassignment method for MMM, established based on the maximum likelihood (ML) estimation, for quantification of crosstalk between the anodes of MAPMT without a priori measurement. The method provides the reassignment of the photons generated by the ghost images to the original spatial location thus increases the SNR of the final reconstructed image.

Dynamic fluorescence lifetime imaging based on acousto-optic deflectors

We report a dynamic fluorescence lifetime imaging (D-FLIM) system that is based on a pair of acousto-optic deflectors for the random regions of interest (ROI) study in the sample. The two-dimensional acousto-optic deflector devices are used to rapidly scan the femtosecond excitation laser beam across the sample, providing specific random access to the ROI. Our experimental results using standard fluorescent dyes in live cancer cells demonstrate that the D-FLIM system can dynamically monitor the changing process of the microenvironment in the ROI in live biological samples.

Fast flexible multiphoton fluorescence lifetime imaging using acousto-optic deflector

We present a fast and flexible fluorescence lifetime imaging microscopy which uses a two-dimensional acousto-optic deflector to achieve fast beam scanning across the sample and provides random access to the regions of interests (ROI). Experimental results using standard fluorescent dye and biological samples show that this system can make addressable fluorescence lifetime measurements and perform fast and flexible fluorescence lifetime imaging particularly to the discontinuous ROI in the sample.

High-speed two-photon imaging

The small size of neuronal dendrites and spines combined with the high speed of neurophysiological signals, such as transients in membrane potential or ion concentration, necessitates that any functional study of these structures uses recording methods with both high spatial and high temporal resolutions. In this regard, conventional two-photon microscopy, in combination with fluorescent indicators sensitive to physiological parameters, has proved to be only a partial solution by providing near-diffraction-limited spatial resolution even when imaging structures deep inside light-scattering tissue. This is because the relatively slow beam-scanning methods used in most conventional two-photon microscopes severely limit the extent to which functional data can be recorded. Here, we detail developments to create high-speed two-photon imaging systems that overcome this limitation and discuss important considerations that must be taken into account when attempting to construct such systems.

Addressable, large-field second harmonic generation microscopy based on 2D acousto-optical deflector and spatial light modulator

We present an addressable, large-field second harmonic generation microscope by combining a 2D acousto-optical deflector with a spatial light modulator. The SLM shapes an incoming mode-locked, near-infrared Ti:Sapphire laser beam into a multifocus array, which can be rapidly scanned by changing the incident angle of the laser beam using a 2D acousto-optical deflector. Compared to the single-beam-scan technique, the multifocus array scan can increase the scanning rate and the field-of-view size with the multi-region imaging ability.

Ultrafast, large-field multiphoton microscopy based on an acousto-optic deflector and a spatial light modulator

We present an ultrafast, large-field multiphoton excitation fluorescence microscope with high lateral and axial resolutions based on a two-dimensional (2-D) acousto-optical deflector (AOD) scanner and spatial light modulator (SLM). When a phase-only SLM is used to shape the near-infrared light from a mode-locked titanium:sapphire laser into a multifocus array including the 0-order beam, a 136 μm × 136 μm field of view is achieved with a 60× objective using a 2-D AOD scanner without any mechanical scan element. The two-photon fluorescence image of a neuronal network that was obtained using this system demonstrates that our microscopy permits observation of dynamic biological events in a large field with high-temporal and -spatial resolution.

Wide-band acousto-optic deflectors for large field of view two-photon microscope

Acousto-optic deflector (AOD) is an attractive scanner for two-photon microscopy because it can provide fast and versatile laser scanning and does not involve any mechanical movements. However, due to the small scan range of available AOD, the field of view (FOV) of the AOD-based microscope is typically smaller than that of the conventional galvanometer-based microscope. Here, we developed a novel wide-band AOD to enlarge the scan angle. Considering the maximum acceptable acoustic attenuation in the acousto-optic crystal, relatively lower operating frequencies and moderate aperture were adopted. The custom AOD was able to provide 60 MHz 3-dB bandwidth and 80% peak diffraction efficiency at 840 nm wavelength. Based on a pair of such AOD, a large FOV two-photon microscope was built with a FOV up to 418.5 μm (40× objective). The spatiotemporal dispersion was compensated simultaneously with a single custom-made prism. By means of dynamic power modulation, the variation of laser intensity within the FOV was reduced below 5%. The lateral and axial resolution of the system were 0.58-2.12 μm and 2.17-3.07 μm, respectively. Pollen grain images acquired by this system were presented to demonstrate the imaging capability at different positions across the entire FOV.

Random access multiphoton (RAMP) microscopy for investigation of cerebral blood flow regulation mechanisms

The processes by which blood flow is regulated at the capillary network level in the brain has been a source of continual debate. It is generally accepted that cerebral blood flow regulation occurs primarily at the arteriolar level. It has been recently suggested, however, that the capillary network is likewise under dynamic regulation. The exact mechanisms of capillary regulation remain unknown. Previously, the limiting factor in determining how the cerebrovascular network is regulated has been the speed at which multiphoton images of large (~200μm²) capillary and arteriole systems can be acquired. Conventional laser scanning microscopy systems are temporally limited in two dimensions. We have developed a Random Access Multiphoton (RAMP) microscope, which operates on the principles of Acousto-optic beam scanning and therefore has no moving parts, specifically for the purpose of imaging blood flow virtually simultaneously throughout the capillary network. We demonstrate the ability to survey blood flow simultaneously in 100 capillaries.

Pulse-modulated second harmonic imaging microscope quantitatively demonstrates marked increase of collagen in tumor after chemotherapy

Pulse-modulated second harmonic imaging microscopes (PM-SHIMs) exhibit improved signal-to-noise ratio (SNR) over conventional SHIMs on sensitive imaging and quantification of weak collagen signals inside tissues. We quantify the spatial distribution of sparse collagen inside a xenograft model of human acute myeloid leukemia (AML) tumor specimens treated with a new drug against receptor tyrosine kinase (ABT-869), and observe a significant increase in collagen area percentage, collagen fiber length, fiber width, and fiber number after chemotherapy. This finding reveals new insights into tumor responses to chemotherapy and suggests caution in developing new drugs and therapeutic regimens against cancers.

Optical recording of neuronal spiking activity from unbiased populations of neurons with high spike detection efficiency and high temporal precision

Activity in populations of neurons is essential for cortical function including signaling of information and signal transport. Previous methods have made advances in recording activity from many neurons but have both technical and analytical limitations. Here we present an optical method, dithered random-access functional calcium imaging, to record somatic calcium signals from up to 100 neurons, in vitro and in vivo. We further developed a maximum-likelihood deconvolution algorithm to detect spikes and precise spike timings from the recorded calcium fluorescence signals. Spike detection efficiency and spike timing detection was determined in acute slices of juvenile mice. The results indicate that the combination of the two methods detected precise spiking activity from unbiased and spatially distributed populations of neurons in acute slices with high efficiency of spike detection (>97%), low rate of false positives (0.0023 spikes/s), and high temporal precision. The results further indicate that there is only a small window of excitation intensities where high spike detection can be achieved consistently.

A compact Acousto-Optic Lens for 2D and 3D femtosecond based 2-photon microscopy

We describe a high speed 3D Acousto-Optic Lens Microscope (AOLM) for femtosecond 2-photon imaging. By optimizing the design of the 4 AO Deflectors (AODs) and by deriving new control algorithms, we have developed a compact spherical AOL with a low temporal dispersion that enables 2-photon imaging at 10-fold lower power than previously reported. We show that the AOLM can perform high speed 2D raster-scan imaging (>150 Hz) without scan rate dependent astigmatism. It can deflect and focus a laser beam in a 3D random access sequence at 30 kHz and has an extended focusing range (>137 mum; 40X 0.8NA objective). These features are likely to make the AOLM a useful tool for studying fast physiological processes distributed in 3D space.

Two-photon microscope for multisite microphotolysis of caged neurotransmitters in acute brain slices

We developed a two-photon microscope optimized for physiologically manipulating single neurons through their postsynaptic receptors. The optical layout fulfills the stringent design criteria required for high-speed, high-resolution imaging in scattering brain tissue with minimal photodamage. We detail the practical compensation of spectral and temporal dispersion inherent in fast laser beam scanning with acousto-optic deflectors, as well as a set of biological protocols for visualizing nearly diffraction-limited structures and delivering physiological synaptic stimuli. The microscope clearly resolves dendritic spines and evokes electrophysiological transients in single neurons that are similar to endogenous responses. This system enables the study of multisynaptic integration and will assist our understanding of single neuron function and dendritic computation.

Enhanced dispersion compensation capability of angular elements based on beam expansion

We demonstrate that beam size manipulation plays an important role in dispersion compensation. With expanded beam, the maximal negative group delay dispersion (GDD) provided by angular elements increases by an order of magnitude compared with original beam. Both calculation and experimental results show that a modest 2 x and 4 x expanded beams can improve dispersion compensation capability of prisms or acousto-optical deflectors: the restored minimal pulse width decreases by 50% and the corresponding distance between angular elements is shortened more than 70 cm. These findings will be helpful for designing dispersion compensation schemes for femtosecond pulse laser application systems such as multiphoton microscopy or laser micromachining.

Invited review article: Imaging techniques for harmonic and multiphoton absorption fluorescence microscopy

We review the current state of multiphoton microscopy. In particular, the requirements and limitations associated with high-speed multiphoton imaging are considered. A description of the different scanning technologies such as line scan, multifoci approaches, multidepth microscopy, and novel detection techniques is given. The main nonlinear optical contrast mechanisms employed in microscopy are reviewed, namely, multiphoton excitation fluorescence, second harmonic generation, and third harmonic generation. Techniques for optimizing these nonlinear mechanisms through a careful measurement of the spatial and temporal characteristics of the focal volume are discussed, and a brief summary of photobleaching effects is provided. Finally, we consider three new applications of multiphoton microscopy: nonlinear imaging in microfluidics as applied to chemical analysis and the use of two-photon absorption and self-phase modulation as contrast mechanisms applied to imaging problems in the medical sciences.

Multiphoton adaptation of a commercial low-cost confocal microscope for live tissue imaging

The Nikon C1 confocal laser scanning microscope is a relatively inexpensive and user-friendly instrument. We describe a straightforward method to convert the C1 for multiphoton microscopy utilizing direct coupling of a femtosecond near-infrared laser into the scan head and fiber optic transmission of emission light to the three-channel detector box. Our adapted system can be rapidly switched between confocal and multiphoton mode, requires no modification to the original system, and uses only a few custom-made parts. The entire system, including scan mirrors and detector box, remain under the control of the user-friendly Nikon EZ-C1 software without modification.

Tunable dispersion compensation by a rotating cylindrical lens

We present a technique for tunable dispersion compensation that is low cost, high speed, and has a large tuning range. By rotating a cylindrical lens at the Fourier plane of a folded 4f grating pair system, the group-velocity dispersion can be tuned over a range greater than 10(5) fs(2), sufficient for compensating the dispersion of several meters of optical fiber.

Optical monitoring of neuronal activity at high frame rate with a digital random-access multiphoton (RAMP) microscope

Two-photon microscopy offers the promise of monitoring brain activity at multiple locations within intact tissue. However, serial sampling of voxels has been difficult to reconcile with millisecond timescales characteristic of neuronal activity. This is due to the conflicting constraints of scanning speed and signal amplitude. The recent use of acousto-optic deflector scanning to implement random-access multiphoton microscopy (RAMP) potentially allows to preserve long illumination dwell times while sampling multiple points-of-interest at high rates. However, the real-life abilities of RAMP microscopy regarding sensitivity and phototoxicity issues, which have so far impeded prolonged optical recordings at high frame rates, have not been assessed. Here, we describe the design, implementation and characterisation of an optimised RAMP microscope. We demonstrate the application of the microscope by monitoring calcium transients in Purkinje cells and cortical pyramidal cell dendrites and spines. We quantify the illumination constraints imposed by phototoxicity and show that stable continuous high-rate recordings can be obtained. During these recordings the fluorescence signal is large enough to detect spikes with a temporal resolution limited only by the calcium dye dynamics, improving upon previous techniques by at least an order of magnitude.

Three-dimensional random access multiphoton microscopy for functional imaging of neuronal activity

The dynamic ability of neuronal dendrites to shape and integrate synaptic responses is the hallmark of information processing in the brain. Effectively studying this phenomenon requires concurrent measurements at multiple sites on live neurons. Substantial progress has been made by optical imaging systems that combine confocal and multiphoton microscopy with inertia-free laser scanning. However, all of the systems developed so far restrict fast imaging to two dimensions. This severely limits the extent to which neurons can be studied, as they represent complex three-dimensional structures. Here we present a new imaging system that utilizes a unique arrangement of acousto-optic deflectors to steer a focused, ultra-fast laser beam to arbitrary locations in three-dimensional space without moving the objective lens. As we demonstrate, this highly versatile random-access multiphoton microscope supports functional imaging of complex three-dimensional cellular structures such as neuronal dendrites or neural populations at acquisition rates on the order of tens of kilohertz.

Combining optical imaging and computational modeling to analyze structure and function of living neurons

We are investigating the computational properties of principal neurons in the mammalian brain. To manage the small size and intricate structure of neuronal dendrites, we employ advanced optical imaging techniques in combination with automatic image reconstruction and computational modeling to study their complex spatio-temporal pattern of activity.

A compact multiphoton 3D imaging system for recording fast neuronal activity

We constructed a simple and compact imaging system designed specifically for the recording of fast neuronal activity in a 3D volume. The system uses an Yb:KYW femtosecond laser we designed for use with acousto-optic deflection. An integrated two-axis acousto-optic deflector, driven by digitally synthesized signals, can target locations in three dimensions. Data acquisition and the control of scanning are performed by a LeCroy digital oscilloscope. The total cost of construction was one order of magnitude lower than that of a typical Ti:sapphire system. The entire imaging apparatus, including the laser, fits comfortably onto a small rig for electrophysiology. Despite the low cost and simplicity, the convergence of several new technologies allowed us to achieve the following capabilities: i) full-frame acquisition at video rates suitable for patch clamping; ii) random access in under ten microseconds with dwelling ability in the nominal focal plane; iii) three-dimensional random access with the ability to perform fast volume sweeps at kilohertz rates; and iv) fluorescence lifetime imaging. We demonstrate the ability to record action potentials with high temporal resolution using intracellularly loaded potentiometric dye di-2-ANEPEQ. Our design proffers easy integration with electrophysiology and promises a more widespread adoption of functional two-photon imaging as a tool for the study of neuronal activity. The software and firmware we developed is available for download at http://neurospy.org/ under an open source license.

Analysis of the dispersion compensation of acousto-optic deflectors used for multiphoton imaging

The acousto-optic deflector (AOD) is highly preferred in laser scanning microscopy for its fast scanning ability and random-addressing capability. However, its application in two-photon microscopy is frustrated by the dispersion of the AOD, which results in beam distortion and pulse lengthening. We report the analysis of simultaneous compensation for the angular dispersion and temporal dispersion of the AOD by merely introducing a single dispersive element such as a prism or a grating. Besides serving as a scanner, the AOD is also a part of the compressor pair by integrating the dispersive nature of the AO interaction. This compensation principle is effective for both one-dimensional (1-D) AOD and two-dimensional (2-D) AOD scanning. Switching from a 1-D to a 2-D system requires proper optical alignment with the compensation element, but does not involve any new components. Analytical expressions are given to illustrate the working principle and to help with understanding the design of the system. Fluorescence images of beads and cells are shown to demonstrate the performance of two-photon microscopy when applying this compensated 2-D AOD as scanner.

Position of the prism in a dispersion-compensated acousto-optic deflector for multiphoton imaging

The performance of a dispersion-compensated acousto-optic deflector (AOD) for steering femtosecond laser pulses was examined with the prism located before or after the AOD, which is regarded as prism-AOD and AOD-prism, respectively. Comparisons are made over parameters including the spot spatial pattern, output pulse width, scanning linearity, the field of view, and the transmission rate. Fluorescence images of 170 nm diameter beads and cells were measured to provide an overall evaluation for these femtosecond laser beam scanning configurations. On the basis of these experiments, the prism-AOD configuration is concluded to be more advantageous for the purpose of simultaneous compensation for the spatial and temporal dispersion.

New methods and uses for fast optical scanning

Advanced optical imaging techniques used in neurobiology commonly employ fluorescent molecules for studying the structure and function of neural tissue. To obtain adequate spatio-temporal resolution, sophisticated scanning schemes are used to manage the excitation light going to and emission light coming from objects under observation. Although the fundamental principles of these techniques remain the same, such as scanning point illumination and point detection for confocal imaging, their physical implementation is the subject of technological advance, for example, the advent of inertia-free discontinuous scanning schemes. In general, the aims of these technological advances are to improve the spatio-temporal resolution of and/or reduce potential photodamage caused by optical imaging in live neural tissue. The number of recent advances in scanning methods indicates their increasing importance in imaging techniques.

Improving the penetration depth in multiphoton excitation laser scanning microscopy

More than a threefold increase in multiphoton laser scanning microscopy depth penetration using a passive predispersion compensation system is reported. Using dispersion-controlled pulses to counteract the effects of positive group delay dispersion in the imaging platform, optical sectioning of fluorescent samples to depths in excess of 800 microm was observed, compared with only 240 microm using a noncompensated setup. Experimental results obtained from both the predispersion compensated and noncompensated systems are compared with theoretical values of pulse broadening in a laser scanning microscope. The observed improvement in depth profiling potentially widens the applications and user base of nonlinear microscopy techniques.