Formation of Hollow Nanocrystals Through the Nanoscale Kirkendall Effect

The beginning of iron corrosion - high-resolution visualization with 3D electron tomography

Understanding the genesis and early-phase reactions of iron corrosion is essential for the early detection, mitigation and prevention of metal degradation. In this work, high-resolution 3D tomography of metallic iron oxidation was acquired using high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). In particular, dendritic capillaries (<0.5 nm) were observed during the initial oxidation of fresh nanoscale zero-valent iron due to the differential oxygen diffusion and iron atoms migration. This observation led to the proposal of a nanoscale "pothole" model for early-phase corrosion, wherein hollowing out of the metal nanoparticle and formation of nanovoids beneath the iron/oxide interface through Kirkendall effect. Coalescence of the nanocapillaries results in the ultimate collapse of metal structure and/or functional failure. Using nanoscale zero-valent iron as a research model, this work provides unprecedented insights into the nano- and atomic-scale mechanisms of iron oxidation, paving the way for advanced detection and prevention strategies for iron corrosion.

Kirkendall Effect-Driven Reversible Chemical Transformation for Reconfigurable Nanocrystals

The potential universality of chemical transformation principles makes it a powerful tool for nanocrystal (NC) synthesis. An example is the nanoscale Kirkendall effect, which serves as a guideline for the construction of hollow structures with different properties compared to their solid counterparts. However, even this general process is still limited in material scope, structural complexity, and, in particular, transformations beyond the conventional solid-to-hollow process. We demonstrate in this work an extension of the Kirkendall effect that drives reversible structural and phase transformations between metastable metal chalcogenides (MCs) and metal phosphides (MPs). Starting from Ni3S4/Cu1.94S NCs as the initial frameworks, ligand-regulated sequential extractions and diffusion of host/guest (S2-/P3-) anions between Ni3S4/Cu1.94S and Ni2P/Cu3P phases enable solid-to-hollow-to-solid structural motif evolution while retaining the overall morphology of the NC. An in-depth mechanistic study reveals that the transformation between metastable MCs and MPs occurs through a combination of ligand-dependent kinetic control and anion mixing-induced thermodynamic control. This strategy provides a robust platform for creating a library of reconfigurable NCs with tunable compositions, structures, and interfaces.

High Response and ppb-Level Detection toward Hydrogen Sensing by Palladium-Doped α-Fe2O3 Nanotubes

Developing hydrogen sensors with parts per billion-level detection limits, high response, and high stability is crucial for ensuring safety across various industries (e.g., hydrogen fuel cells, chemical manufacturing, and aerospace). Despite extensive research on parts per billion-level detection, it still struggles to meet stringent requirements. Here, high performance and ppb-level H2 sensing have been developed with palladium-doped iron oxide nanotubes (Pd@Fe2O3 NTs), which have been prepared by FeCl3·6H2O, PdCl2, and PVP electrospinning and air calcination techniques. Various characterization techniques (FESEM, TEM, XRD, and so forth) were used to prove that the nanotube structure was successfully prepared, and the doping of Pd nanoparticles was realized. The experiments show that palladium doping can significantly improve the gas response of iron oxide nanotubes. Specifically, 0.59 wt % Pd@Fe2O3 NTs have high response (Ra/Rg = 41,000), high selectivity, and excellent repeatability for 200 ppm hydrogen at 300 °C. Notably, there was still a significant response at a low detection limit (LOD) of 50 ppb (Ra/Rg = 16.8). This excellent hydrogen sensing performance may be attributed to the high surface area of the nanotubes, the p-n heterojunction of PdO/Fe2O3, which allows more oxygen to be adsorbed on the surface, and the catalytic action of Pd nanoparticles, which promotes the reaction of hydrogen with surface-adsorbed oxygen.

Switching of electrochemical selectivity due to plasmonic field-induced dissociation

Electrochemical reactivity is known to be dictated by the structure and composition of the electrocatalyst-electrolyte interface. Here, we show that optically generated electric fields at this interface can influence electrochemical reactivity insofar as to completely switch reaction selectivity. We study an electrocatalyst composed of gold-copper alloy nanoparticles known to be active toward the reduction of CO2 to CO. However, under the action of highly localized electric fields generated by plasmonic excitation of the gold-copper alloy nanoparticles, water splitting becomes favored at the expense of CO2 reduction. Real-time time-dependent density functional tight binding calculations indicate that optically generated electric fields promote transient-hole-transfer-driven dissociation of the O─H bond of water preferentially over transient-electron-driven dissociation of the C─O bond of CO2. These results highlight the potential of optically generated electric fields for modulating pathways, switching reactivity on/off, and even directing outcomes.

Ferromagnetic-Antiferromagnetic Coupling in Gas-Phase Synthesized M(Fe, Co, and Ni)-Cr Nanoparticles for Next-Generation Magnetic Applications

Combining ferromagnetic-antiferromagnetic materials in nanoalloys (i.e., nanoparticles, NPs, containing more than one element) can create a diverse landscape of potential electronic structures. As a result, a number of their magnetic properties can be manipulated, such as the exchange bias between NP core and shell, the Curie temperature of nanoparticulated samples, or their magnetocaloric effect. In this work, such a family of materials (namely M-Cr NPs where M is Fe, Co, Ni, or some combination of them) is reviewed with respect to the tunability of their magnetic properties via optimized doping with Cr up to its solubility limit. To this end, gas-phase synthesis has proven a most effective method, allowing excellent control over the physical structure, composition, and chemical ordering of fabricated NPs by appropriately selecting various deposition parameters. Recent advances in this field (both experimental and computational) are distilled to provide a better understanding of the underlying physical laws and point toward new directions for cutting-edge technological applications. For each property, a relevant potential application is associated, such as memory cells and recording heads, induced hyperthermia treatment, and magnetic cooling, respectively, aspiring to help connect the output of fundamental and applied research with current real-world challenges.

Sulfidation of Nanoscale Zero-Valent Iron by Sulfide: The Dynamic Process, Mechanism, and Role of Ferrous Iron

Sulfidation of nanoscale zerovalent iron (nZVI) can enhance particle performance. However, the underlying mechanisms of nZVI sulfidation are poorly known. We studied the effects of Fe2+ on 24-h dynamics of nZVI sulfidation by HS- using a dosed S to Fe molar ratio of 0.2. This shows that in the absence of Fe2+, HS- rapidly adsorbed onto nZVI particles and reacted with surface iron oxide to form mackinawite and greigite (<0.5 h). As nZVI corrosion progressed, amorphous FeSx in solution deposited on nZVI, forming S-nZVI (0.5-24 h). However, in the initial presence of Fe2+, the rapid reaction between HS- and Fe2+ produced amorphous FeSx, which deposited on the nZVI and corroded the surface iron oxide layer (<0.25 h). This was followed by redeposition of colloidal iron (hydr)oxide on the particle surface (0.25-8 h) and deposition of residual FeSx (8-24 h) on S-nZVI. S loading on S-nZVI was 1 order of magnitude higher when Fe2+ was present. Surface characterization of the sulfidated particles by TEM-SAED, XPS, and XAFS verified the solution dynamics and demonstrated that S2- and S22-/Sn2- were the principal reduced S species on S-nZVI. This study provides a methodology to tune sulfur loading and S speciation on S-nZVI to suit remediation needs.

Construction of Molecularly Dispersed Polyoxometalate-Alumina Hybrid Hollow Nanoflowers via Water-Induced Kirkendall Effect

Hybrid nanomaterials with controllable structures and diverting components have attracted significant interest in the functional materials field. Here, we develop a solvent evaporation-induced self-assembly (EISA) strategy to synthesize nanosheet-assembled phosphomolybdic acid (H3PMo)-alumina hybrid hollow spheres. The resulting nanoflowers display a high surface area (up to 697 m2 g-1), adjustable diameter, high chemical/thermal stability, and especially molecularly dispersed H3PMo species. By employing various microscopic and spectroscopic techniques, the formation mechanism is elucidated, revealing the simultaneous control of the morphology by heteropoly acids and water through the water-induced Kirkendall effect. The versatility of the synthesis method is demonstrated by varying surfactants, heteropoly acids, and metal oxide precursors for the facile synthesis of hybrid metal oxides. Spherical hybrid alumina serves as an attractive support material for constructing metal-acid bifunctional catalysts owing to its advantageous surface area, acidity, and mesoporous microenvironment. Pt-loaded hollow flowers exhibit excellent catalytic performance and exceptional stability in the hydrodeoxygenation of vanillin with recyclability for up to 10 cycles. This research presents an innovative strategy for the controllable synthesis of hybrid metal oxide nanospheres and hollow nanoflowers, providing a multifunctional platform for diverse applications.

Positively Charged Hollow Co Nanoshells by Kirkendall Effect Stabilized by Electron Sink for Alkaline Water Dissociation

While cobalt (Co) exhibits a comparable energy barrier for H* adsorption/desorption to platinum in theory, it is generally not suitable for alkaline hydrogen evolution reaction (HER) because of unfavorable water dissociation. Here, the Kirkendall effect is adopted to fabricate positive-charged hollow metal Co (PHCo) nanoshells that are stabilized by MoO2 and chainmail carbon as the electron sink. Compared to the zero-valent Co, the PHCo accelerates the water dissociation and changes the rate-determining step from Volmer to Heyrovsky process. Alkaline HER occurs with a low overpotential of 59.0 mV at 10 mA cm-2. Operando Raman and first principles calculations reveal that the interfacial water to the PHCo sites and the accelerated proton transfer are conducive to the adsorption and dissociation of H2O molecules. Meanwhile, the upshifted d-band center of PHCo optimizes the adsorption/desorption of H*. This work provides a unique synthesis of hollow Co nanoshells via the Kirkendall effect and insights to water dissociation on catalyst surfaces with tailored charge states.

MnFe Prussian Blue Analogue Open Cages for Sodium-Ion Batteries: Simultaneous Evolution of Structure, Morphology, and Energy Storage Properties

Prussian blue analogues (PBAs) exhibiting hollow morphologies have garnered considerable attention owing to their remarkable electrochemical properties. In this study, a one-pot strategy is proposed for the synthesis of MnFe PBA open cages. The materials are subsequently employed as cathode electrode in sodium-ion batteries (SIBs). The simultaneous evolution of structure, morphology, and performance during the synthesis process is investigated. The findings reveal substantial structural modifications as the reaction time is prolonged. The manganese content in the samples diminishes considerably, while the potassium content experiences an increase. This compositional variation is accompanied by a significant change in the spin state of the transition metal ions. These structural transformations trigger the occurrence of the Kirkendall effect and Oswald ripening, culminating in a profound alteration of the morphology of MnFe PBA. Moreover, the shifts in spin states give rise to distinct changes in their charge-discharge profiles and redox potentials. Furthermore, an exploration of the formation conditions of the samples and their variations before and after cycling is conducted. This study offers valuable insights into the intricate relationship between the structure, morphology, and electrochemical performance of MnFe PBA, paving the way for further optimizations in this promising class of materials for energy storage applications.

A Review of Metal-Organic Frameworks Derived Hollow-Structured Photocatalysts: Synthesis and Applications

Photocatalysis is a most important approach to addressing global energy shortages and environmental issues due to its environmentally friendly and sustainable properties. The key to realizing efficient photocatalysis relies on developing appropriate catalysts with high efficiency and chemical stability. Among various photocatalysts, Metal-organic frameworks (MOFs)-derived hollow-structured materials have drawn increased attention in photocatalysis based on advantages like more active sites, strong light absorption, efficient transfer of pho-induced charges, excellent stability, high electrical conductivity, and better biocompatibility. Specifically, MOFs-derived hollow-structured materials are widely utilized in photocatalytic CO2 reduction (CO2RR), hydrogen evolution (HER), nitrogen fixation (NRR), degradation, and other reactions. This review starts with the development story of MOFs, the commonly adopted synthesis strategies of MOFs-derived hollow materials, and the latest research progress in various photocatalytic applications are also introduced in detail. Ultimately, the challenges of MOFs-derived hollow-structured materials in practical photocatalytic applications are also prospected. This review holds great potential for developing more applicable and efficient MOFs-derived hollow-structured photocatalysts.

Nanomaterials Research at a Primarily Undergraduate Institution: Transforming Nanorods, Undergraduate Research Communities, and Infrastructure

Undergraduate research transforms student's conceptions of themselves as scientists and encourages participation and retention in science, technology, engineering, and mathematics (STEM) fields. Many barriers exist to carrying out scientifically impactful undergraduate research in nanomaterials at primarily undergraduate institutions (PUIs). Here, we share several practices and design principles that demonstrate pathways to overcome these barriers. Design of modular research projects with low entry barriers is essential. Postsynthetic transformation of nanoparticles is a field that enables such design and has been used successfully to advance nanoscience research while being achievable within undergraduate laboratories. Relatively large, inclusive research communities can be supported through the creation of opportunities with peer- and near-peer mentoring. We also share emerging strategies for enabling routine undergraduate access to transmission electron microscopy, which is one of the most mainstream characterization techniques in nanoscience yet is frequently absent from the infrastructure at undergraduate-focused institutions.

Ligand Tail Controls the Conformation of Indium Sulfide Ultrathin Nanoribbons

We report the conformational control of 2D ultrathin indium sulfide nanoribbons by tuning their amine ligands' alkyl chain. The initial orthorhombic InS nanoribbons bare n-octylamine ligands and display a highly curved geometry with a characteristic figure of eight shapes. Exchanging the native ligand by oleylamine induces their complete unfolding to yield flat board-shaped nanoribbons. Significant strain variations in the InS crystal structure accompany this shape-shifting. By tuning the linear alkyl chain length from 4 to 18 carbon atoms, we show using small-angle X-ray scattering in solution and transmission electron microscopy that the curvature of the nanoribbon subtly depends on the ligand-ligand interactions at the nanoribbon's surface. The curvature decreases gradually as the chain length increases, while carbon unsaturation has an unexpectedly significant effect at constant chain length. These experiments shed light on the critical role of the ligand monolayer on the curvature of ultrathin 2D crystalline nanosheets and demonstrate that weak supramolecular forces within the organic part of colloidal nanocrystals can dramatically impact their shape. This transduction mechanism, in which changes in the organic monolayer impact the shape of a nanocrystal, will help to devise new strategies to design stimuli-responsive systems that take advantage of both the flexibility of organic moieties and the physical properties of the inorganic core.

Optimization of Carbon-Defect Engineering to Boost Catalytic Ozonation Efficiency of Single Fe─N4 Coordination Motif

Carbon-defect engineering in single-atom metal-nitrogen-carbon (M─N─C) catalysts by straightforward and robust strategy, enhancing their catalytic activity for volatile organic compounds, and uncovering the carbon vacancy-catalytic activity relationship are meaningful but challenging. In this study, an iron-nitrogen-carbon (Fe─N─C) catalyst is intentionally designed through a carbon-thermal-diffusion strategy, exposing extensively the carbon-defective Fe─N4 sites within a micro-mesoporous carbon matrix. The optimization of Fe─N4 sites results in exceptional catalytic ozonation efficiency, surpassing that of intact Fe─N4 sites and commercial MnO2 by 10 and 312 times, respectively. Theoretical calculations and experimental data demonstrated that carbon-defect engineering induces selective cleavage of C─N bond neighboring the Fe─N4 motif. This induces an increase in non-uniform charges and Fermi density, leading to elevated energy levels at the center of Fe d-band. Compared to the intact atomic configuration, carbon-defective Fe─N4 site is more activated to strengthen the interaction with O3 and weaken the O─O bond, thereby reducing the barriers for highly active surface atomic oxygen (*O/*OO), ultimately achieving efficient oxidation of CH3SH and its intermediates. This research not only offers a viable approach to enhance the catalytic ozonation activity of M─N─C but also advances the fundamental comprehension of how periphery carbon environment influences the characteristics and efficacy of M─N4 sites.

Magnetic yolk-shell structured periodic mesoporous organosilica supported palladium as a powerful and highly recoverable nanocatalyst for the reduction of nitrobenzenes

A novel palladium-loaded yolk-shell structured nanomaterial with magnetite core and phenylene-based periodic mesoporous organosilica (PMO) shell (Fe3O4@YS-Ph-PMO/Pd) nanocatalyst was synthesized for the reduction of nitrobenzenes. The Fe3O4@YS-Ph-PMO/Pd was prepared through cetyltrimethylammonium bromide (CTAB) directed condensation of 1,4-bis(triethoxysilyl)benzene (BTEB) around Fe3O4@silica nanoparticles followed by treatment with palladium acetate. This nanocatalyst was characterized by using Fourier transform infrared (FT-IR) spectroscopy, thermal gravimetric analysis (TGA), low-angle and wide-angle powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM) analyses. These analyses showed a magnetic nanomaterial with high chemical and thermal stability for the designed composite. The Fe3O4@YS-Ph-PMO/Pd nanocomposite was employed as a powerful and highly recoverable catalyst in the green reduction of nitroarenes in H2O at room temperature. A variety of nitroarene derivatives were applied as substrate in the presence of 0.9 mol% of Fe3O4@YS-Ph-PMO/Pd catalyst. All nitroarenes were selectively converted to their corresponding amines with high to excellent yields (92-96%) within short reaction times (10-18 min). This catalyst was recovered and reused at least 11 times without significant decrease in efficiency and stability.

Mechanistic Insights into Plasma Oxidation of Ag Nanofilms: Experimental and Theoretical Studies

Plasma oxidation of metals has been studied extensively to fabricate nanoporous oxides with the merits of room temperature treatment and facile control of the oxidation rate. Plasma oxidation of Ag, motivated by studies on atomic oxygen corrosion of Ag, is one of the most studied systems. However, several important questions remain unaddressed and even overlooked traditionally: the critical role played by atomic O in promoting oxidation, evolution of microstructures during plasma exposure, and a sound framework for quantitative oxidation kinetic analyses. In this paper, the O2 plasma oxidation behavior of Ag films deposited on Si substrates was systematically studied both experimentally and theoretically. The effects of plasma pressure and power on the microstructural evolution and oxidation kinetics of Ag films of various thicknesses were investigated using comprehensive characterization, as well as numerical analysis of plasma chemistry for deriving atomic O concentration. The findings here provide a full picture and deep mechanistic insights into the morphology and microstructure evolution of Ag films and the growth of dense or porous Ag2O and AgO oxide layers by plasma oxidation, revealing the intricate interplay between atomic O, vacancy creation, Ag ion diffusion, Kirkendall effect, formation of pores, and interfacial void coalescence. The methodology developed here can be easily transferred to help understand the plasma oxidation behavior of other metals.

Ultrasmall Inorganic Mesoporous Nanoparticles: Preparation, Functionalization, and Application

Ultrasmall mesoporous nanoparticles (<50 nm), a unique porous nanomaterial, have been widely studied in many fields in the last decade owing to the abundant advantages, involving rich mesopores, low density, high surface area, numerous reaction sites, large cavity space, ultrasmall size, etc. This paper presents a review of recent advances in the preparation, functionalization, and applications of ultrasmall inorganic mesoporous nanoparticles for the first time. The soft monomicelles-directed method, in contrast to the hard-template and template-free methods, is more flexible in the synthesis of mesoporous nanoparticles. This is because the amphiphilic micelle has tunable functional blocks, controlled molecule masses, configurations and mesostructures. Focus on the soft micelle directing method, monomicelles could be classified into four types, i.e., the Pluronic-type block copolymer monomicelles, laboratory-synthesized amphiphilic block copolymers monomicelles, the single-molecule star-shaped block copolymer monomicelles, and the small-molecule anionic/cationic surfactant monomicelles. This paper also reviews the functionalization of the inner mesopores and the outer surfaces, which includes constructing the yolkshell structures (encapsulated nanoparticles), anchoring the active components packed on the shell and building an asymmetric Janus architecture. Then, several representative applications, involving catalysis, energy storage, and biomedicines are presented. Finally, the prospects and challenges of controlled synthesis and large-scale applications of ultrasmall mesoporous nanoparticles in the future are foreseen.

Atomically Resolved Transition Pathways of Iron Redox

The redox transition between iron and its oxides is of the utmost importance in heterogeneous catalysis, biological metabolism, and geological evolution. The structural characteristics of this reaction may vary based on surrounding environmental conditions, giving rise to diverse physical scenarios. In this study, we explore the atomic-scale transformation of nanosized Fe3O4 under ambient-pressure H2 gas using in-situ environmental transmission electron microscopy. Our results reveal that the internal solid-state reactions dominated by iron diffusion are coupled with the surface reactions involving gaseous O or H species. During reduction, we observe two competitive reduction pathways, namely Fe3O4 → FeO → Fe and Fe3O4 → Fe. An intermediate phase with vacancy ordering is observed during the disproportionation reaction of Fe2+ → Fe0 + Fe3+, which potentially alleviates stress and facilitates ion migration. As the temperature decreases, an oxidation process occurs in the presence of environmental H2O and trace amounts of O2. A direct oxidation of Fe to Fe3O4 occurs in the absence of the FeO phase, likely corresponding to a change in the water vapor content in the atmosphere. This work elucidates a full dynamical scenario of iron redox under realistic conditions, which is critical for unraveling the intricate mechanisms governing the solid-solid and solid-gas reactions.

Stability of Plasmonic Mg-MgO Core-Shell Nanoparticles in Gas-Phase Oxidative Environments

Magnesium is a recent addition to the plasmonic toolbox: nanomaterials that efficiently utilize photons' energy due to their ability to sustain localized surface plasmon resonances. Magnesium nanoparticles protected by a native oxide shell can efficiently absorb light across the solar spectrum, making them a promising photocatalytic material. However, their inherent reactivity toward oxidation may limit the number of reactions in which Mg-MgO can be used. Here, we investigate the stability of plasmonic Mg-MgO core-shell nanoplates under oxidative conditions. We demonstrate that the MgO shell stabilizes the metallic Mg core against oxidation in air at up to 400 °C. Furthermore, we show that the reactivity of Mg-MgO nanoplates with water vapor (3.5 vol % in N2) decreases with temperature, with no oxidation of the Mg core detected from 200 to 400 °C. This work unravels the potential of Mg-MgO nanoparticles for a broad range of catalytic transformations occurring in oxidative environments.

Hierarchical porous carbon materials for lithium storage: preparation, modification, and applications

Secondary battery as an efficient energy conversion device has been highly attractive for alleviating the energy crisis and environmental pollution. Hierarchical porous carbon (HPC) materials with multiple sizes pore channels are considered as promising materials for energy conversion and storage applications, due to their high specific surface area and excellent electrical conductivity. Although many reviews have reported on carbon materials for different fields, systematic summaries about HPC materials for lithium storage are still rare. In this review, we first summarize the main preparation methods of HPC materials, including hard template method, soft template method, and template-free method. The modification methods including porosity and morphology tuning, heteroatom doping, and multiphase composites are introduced systematically. Then, the recent advances in HPC materials on lithium storage are summarized. Finally, we outline the challenges and future perspectives for the application of HPC materials in lithium storage.

Construction of Sugar-Gourd-Shaped Carbon Nanofibers Embedded with Heterostructured Zinc-Cobalt Selenide Nanocages for Superior Potassium-Ion Storage

Transition metal selenides are considered as promising anode materials for potassium-ion batteries (PIBs) due to their high theoretical capacities. However, their applications are limited by low conductivity and large volume expansion. Herein, sugar-gourd-shaped carbon nanofibers embedded with heterostructured ZnCo-Se nanocages are prepared via a facile template-engaged method combined with electrospinning and selenization process. In this hierarchical ZnCo-Se@NC/CNF, abundant phase boundaries of CoSe2/ZnSe heterostructure can promote interfacial electron transfer and chemical reactivity. The interior porous ZnCo-Se@NC nanocage structure relieves volume expansion and maintains structural integrity during K+ intercalation and deintercalation. The exterior spinning carbon nanofibers connect the granular nanocages in series, which prevents the agglomeration, shortens the electron transport distance and enhances the reaction kinetics. As a self-supporting anode material, ZnCo-Se@NC/CNF delivers a high capacity (362 mA h g-1 at 0.1 A g-1 after 100 cycles) with long-term stability (95.9% capacity retention after 1000 cycles) and shows superior reaction kinetics with high-rate K-storage. Energy level analysis and DFT calculations illustrate heterostructure facilitates the adsorption of K+ and interfacial electron transfer. The K+ storage mechanism is revealed by ex situ XRD and EIS analyses. This work opens a novel avenue in designing high-performance heterostructured anode materials with ingenious structure for PIBs.

Structured Catalysts and Catalytic Processes: Transport and Reaction Perspectives

The structure of catalysts determines the performance of catalytic processes. Intrinsically, the electronic and geometric structures influence the interaction between active species and the surface of the catalyst, which subsequently regulates the adsorption, reaction, and desorption behaviors. In recent decades, the development of catalysts with complex structures, including bulk, interfacial, encapsulated, and atomically dispersed structures, can potentially affect the electronic and geometric structures of catalysts and lead to further control of the transport and reaction of molecules. This review describes comprehensive understandings on the influence of electronic and geometric properties and complex catalyst structures on the performance of relevant heterogeneous catalytic processes, especially for the transport and reaction over structured catalysts for the conversions of light alkanes and small molecules. The recent research progress of the electronic and geometric properties over the active sites, specifically for theoretical descriptors developed in the recent decades, is discussed at the atomic level. The designs and properties of catalysts with specific structures are summarized. The transport phenomena and reactions over structured catalysts for the conversions of light alkanes and small molecules are analyzed. At the end of this review, we present our perspectives on the challenges for the further development of structured catalysts and heterogeneous catalytic processes.

Direct Visualization of Chemical Transport in Solid-State Chemical Reactions by Time-of-Flight Secondary Ion Mass Spectrometry

Systematic control and design of solid-state chemical reactions are required for modifying materials properties and in novel synthesis. Understanding chemical dynamics at the nanoscale is therefore essential to revealing the key reactive pathways. Herein, we combine focused ion beam-scanning electron microscopy (FIB-SEM) and time-of-flight secondary ion mass spectrometry (TOF-SIMS) to track the migration of sodium from a borate coating to the oxide scale during in situ hot corrosion testing. We map the changing distribution of chemical elements and compounds from 50 to 850 °C to reveal how sodium diffusion induces corrosion. The results are validated by in situ X-ray diffraction and post-mortem TOF-SIMS. We additionally retrieve the through-solid sodium diffusion rate by fitting measurements to a Fickian diffusion model. This study presents a step change in analyzing microscopic diffusion mechanics with high chemical sensitivity and selectivity, a widespread analytical challenge that underpins the defining rates and mechanisms of solid-state reactions.

Ball-in-ball NiS2@CoS2 heterojunction driven by Kirkendall effect for high-performance Mg2+/Li+ hybrid batteries

Mg2+/Li+ hybrid batteries (MLHBs), which support the rapid insertion and removal of Mg2+/Li+ bimetallic ions, are promising energy storage systems. Inspired by the Kirkendall effect, ball-in-ball bimetallic sulfides with heterostructures were prepared as cathode materials for the MLHBs. First, a nickel-cobalt precursor (NiCo-X precursor) with three-dimensional (3D) nanosheets on its surface was prepared using a solvothermal method based on the association reaction between alkoxide molecules. Subsequently, the NiCo-X precursor was vulcanized at high temperature using the potential energy difference as the driving force to successfully prepare NiS2@CoS2 core-shell hollow spheres. When used as the positive electrode material for the MLHBs, the NiS2@CoS2 hollow spheres exhibited excellent Mg2+/Li+ ion storage capacity, high specific capacity, good rate performance, and stable cyclic stability owing to their tough hierarchical structure. At a current density of 500 mA g-1, a specific capacity of 536 mAh g-1 was maintained after 200 cycles. By explaining the transformation mechanism of Mg2+/Li+ in bimetallic sulfides, it was proven that Mg2+ and Li+ worked cooperatively. This study provides a new approach for developing MLHBs with good electrochemical properties.

Design and construction of hollow metal sulfide/selenide core-shell heterostructure arrays for hybrid supercapacitor

Transition metal sulfides and selenides are common electrode materials in supercapacitors. However, the slow redox kinetics and structural collapse during charge-discharge cycles of single-component materials have impeded their electrochemical performance. In this study, hollow Co9S8 nanotubes were synthesized through a rational morphology design approach. Subsequently, NiSe2 or Co0.85Se was electrodeposited onto the Co9S8 nanotubes, yielding two core-shell heterostructure arrays, namely, NiSe2@Co9S8 and Co0.85Se@Co9S8. By fully leveraging the advantages and synergistic effects of these dual-phase heterostructures, the NiSe2@Co9S8 and Co0.85Se@Co9S8 configurations demonstrated outstanding areal capacitances of 12.54 F cm-2 and 9.61 F cm-2, respectively, at 2 mA cm-2. When integrated with activated carbon in hybrid supercapacitors, the NiSe2@Co9S8//AC and Co0.85Se@Co9S8//AC devices exhibited excellent energy storage performance, with energy densities of 0.959 mW h at 1.681 mW and 0.745 mW h at 1.569 mW, respectively. Additionally, these hybrid supercapacitors demonstrated remarkable cycling stability, with capacitance retention of 87.5% and 89.5% after 5000 cycles for NiSe2@Co9S8//AC and Co0.85Se@Co9S8//AC, respectively. This study provides a novel approach to the synthesis of multiphase core-shell heterostructures based on metal sulfides and selenides, opening new avenues for future research.

Sulfur Migration Enhanced Proton-Coupled Electron Transfer for Efficient CO2 Desorption with Core-Shelled C@Mn3O4

Transforming hazardous species into active sites by ingenious material design was a promising and positive strategy to improve catalytic reactions in industrial applications. To synergistically address the issue of sluggish CO2 desorption kinetics and SO2-poisoning solvent of amine scrubbing, we propose a novel method for preparing a high-performance core-shell C@Mn3O4 catalyst for heterogeneous sulfur migration and in situ reconstruction to active -SO3H groups, and thus inducing an enhanced proton-coupled electron transfer (PCET) effect for CO2 desorption. As anticipated, the rate of CO2 desorption increases significantly, by 255%, when SO2 is introduced. On a bench scale, dynamic CO2 capture experiments reveal that the catalytic regeneration heat duty of SO2-poisoned solvent experiences a 32% reduction compared to the blank case, while the durability of the catalyst is confirmed. Thus, the enhanced PCET of C@Mn3O4, facilitated by sulfur migration and simultaneous transformation, effectively improves the SO2 resistance and regeneration efficiency of amine solvents, providing a novel route for pursuing cost-effective CO2 capture with an amine solvent.

Trapping of heavy metal ions from electroplating wastewater with phosphorylated double-shelled hollow spheres

The mesoporous multi-shelled hollow structures are promising for trapping of non-degradable heavy metal ions in wastewater but difficult to synthesize. We successfully demonstrated a simple strategy for the construction of mesopore windows on double-shelled α-Fe2O3 hollow spheres. A step-by-step proof of concept synthesis mechanism has been revealed by using mainly electron microscopy and thermogravimetric analysis. We proved that mesopore windows are indispensable to realize the complete surface coverage of phosphonate ligands on α-Fe2O3 double-shelled hollow spheres. The phosphonic groups inherently coordinated with Ni(II) and Cu(II) ions and formed complexes of high stability. Importantly, owing to the structural merits, the phosphorylated double-shelled hollow spheres selectively removes Ni(II) and Cu(II) at wider sample pH range with a high capacity of 380 mg g-1 and 410 mg g-1, respectively. In addition, no significant decrease in the removal efficiency was observed under high salt matrix. For electroplating industry wastewater, the novel structure performs simultaneous Ni(II) and Cu(II) removal, thus producing effluent of stable quality that meets local discharge regulations.

Sphere-Confined Reversible Zn Deposition for Stable Alkaline Aqueous Batteries

The practical applications of alkaline zinc-based batteries are challenged by poor rechargeability with an insufficient zinc utilization ratio. Herein, a sphere-confined reversible zinc deposition behavior from a free-standing Zn anode is reported, which is composed of bi-continuous ZnO-protected interconnected and hollowed Zn microspheres by the Kirkendall effect. The cross-linked Zn network with in situ formed outer ZnO shell and inner hollow space not only inhibits side reactions but also ensures long-range conductivity and accommodates shape change, which induces preferential reversible zinc dissolution-deposition process in the inner space and maintains structural integrity even under high zinc utilization ratio. As a result, the Zn electrode can be stably cycled for 390 h at a high current density of 20 mA cm-2 (60% depth of discharge), outperforming previously reported alkaline Zn anodes. A stable zinc-nickel oxide hydroxide battery with a high cumulative capacity of 8532 mAh cm-2 at 60% depth of discharge is also demonstrated.

Multifunctional Structure-Modified Quaternary Compounds Co9Se8-CuSe2-WSe2 Mixed with MWCNT as a Counter Electrode Material for Dye-Sensitized Solar Cells

In this study, a trimetallic selenide material with a hollow spherical structure (Co9Se8-CuSe2-WSe2) was synthesized through two consecutive solvothermal reactions. The synergistic effect between the quaternary elements, the benefits of the selenization of metals, and the unique morphology led to the prominent electrocatalytic ability of Co9Se8-CuSe2-WSe2 hollow spheres. Co9Se8-CuSe2-WSe2 hollow spheres were then mixed with oxygen plasma-treated multiwalled carbon nanotubes (MWCNT) as counter electrode (CE) material for dye-sensitized solar cells (DSSCs), achieving a photoelectric conversion efficiency (η) of 9.23% under one sun condition (AM 1.5G, 100 mW cm-2), surpassing the 8.08% of devices with platinum counter electrodes (PtCEs). For indoor conditions, a T5 light source was applied to the DSSCs with Co9Se8-CuSe2-WSe2 + MWCNT CE, and the efficiency increased to 14.14% under 3600 lx irradiance. Finally, Co9Se8-CuSe2-WSe2 + MWCNT CE demonstrated good stability with 92.23% retention after 1000 cycles of cyclic voltammetry, exceeding the 82.49% of PtCE. Therefore, Co9Se8-CuSe2-WSe2 + MWCNT shows potential as a substitute for platinum as CE material for DSSCs.

A General Synthesis of Nanostructured Conductive Metal-Organic Frameworks from Insulating MOF Precursors for Supercapacitors and Chemiresistive Sensors

Two-dimensional conjugated metal-organic frameworks (2D c-MOFs) are emerging as a unique subclass of layer-stacked crystalline coordination polymers that simultaneously possess porous and conductive properties, and have broad application potential in energy and electronic devices. However, to make the best use of the intrinsic electronic properties and structural features of 2D c-MOFs, the controlled synthesis of hierarchically nanostructured 2D c-MOFs with high crystallinity and customized morphologies is essential, which remains a great challenge. Herein, we present a template strategy to synthesize a library of 2D c-MOFs with controlled morphologies and dimensions via insulating MOFs-to-c-MOFs transformations. The resultant hierarchically nanostructured 2D c-MOFs feature intrinsic electrical conductivity and higher surface areas than the reported bulk-type 2D c-MOFs, which are beneficial for improved access to active sites and enhanced mass transport. As proof-of-concept applications, the hierarchically nanostructured 2D c-MOFs exhibit a superior performance for electrical properties related applications (hollow Cu-BHT nanocubes-based supercapacitor and Cu-HHB nanoflowers-based chemiresistive gas sensor), achieving over 225 % and 250 % improvement in specific capacity and response intensity over the corresponding bulk type c-MOFs, respectively.

Single-Crystal One-Dimensional Porous Ladder Covalent Polymers

The synthesis of single-crystal, one-dimensional (1D) polymers is of great importance but a formidable challenge. Herein, we report the synthesis of single-crystal 1D ladder polymers in solution by dynamic covalent chemistry. The three-dimensional electron diffraction technique was used to rigorously solve the structure of the crystalline polymers, unveiling that each polymer chain is connected by double covalent bridges and all polymer chains are packed in a staggered and interlaced manner by π-π stacking and hydrogen bonding interactions, making the crystalline polymers highly robust in both thermal and chemical stability. The synthesized single-crystal polymers possess permanent micropores and can efficiently remove CO2 from the C2H2/CO2 mixture to obtain high-purity C2H2, validated by dynamic breakthrough experiments. This work demonstrates the first example of constructing single-crystal 1D porous ladder polymers with double covalent bridges in solution for efficient C2H2/CO2 separation.

Rational Design of Hollow Structural Materials for Sodium-Ion Battery Anodes

The development of sodium-ion battery (SIB) anodes is still hindered by their rapid capacity decay and poor rate capabilities. Although there have been some new materials that can be used to fabricate stable anodes, SIBs are still far from wide applications. Strategies like nanostructure construction and material modification have been used to prepare more robust SIB anodes. Among all the design strategies, the hollow structure design is a promising method in the development of advanced anode materials. In the past decade, research efforts have been devoted to modifying the synthetic route, the type of templates, and the interior structure of hollow structures with high capacity and stability. A brief introduction is made to the main material systems and classifications of hollow structural materials first. Then different morphologies of hollow structural materials for SIB anodes from the latest reports are discussed, including nanoboxes, nanospheres, yolk shells, nanotubes, and other more complex shapes. The most used templates for the synthesis of hollow structrual materials are covered and the perspectives are highlighted at the end. This review offers a comprehensive discussion of the synthesis of hollow structural materials for SIB anodes, which could be potentially of use to research areas involving hollow materials design for batteries.

Cascade Performance of Nitroarenes with Alcohols Boosted by a Hollow Flying Saucer-Shaped Ni-Al2O3 Catalyst via a MOF-Templated Strategy Induced by the Kirkendall Effect

Catalysts with an open hollow structure can enhance the mass transfer capability of the catalyst during the reaction process, thereby further improving the catalytic performance. In this work, uniform and monodisperse flying-squircher-shaped Al-MOFs were synthesized via a solvothermal method. Furthermore, a hollow structure Al2O3-supported metallic Ni catalyst (termed Ni-Al2O3-HFA) was synthesized via the Kirkendall effect for the hydrogenation-alkylation cascade reaction by employing as-synthesized Al-MOFs as a carrier for impregnation of Ni(NO3)2·6H2O through further calcination and reduction. Various characterizations (e.g., XRD, HADDF-STEM, H2-TPR) were conducted to reveal the superior performance of the developed Ni-Al2O3-HFA catalyst compared to Ni/Al2O3-IWI (Al2O3 obtained from calcination of Al-MOFs) in cascade reaction between nitroarenes and alcohols. We hope to use the MOF template method via the Kirkendall effect to prepare hollow structure nanocatalysts, which can provide a guideline for the preparation of other hollow materials.

Cobalt vacancy-originated TiMnCoCN compounds with a self-adjusting ability for the high-efficiency acidic oxygen evolution reaction

Oxygen evolution reaction (OER) electrocatalysts in acidic media, except for precious IrO2, have difficulty realizing good electrocatalytic activity and high electrochemical stability simultaneously. However, the scarcity of IrO2 as an acidic OER electrocatalyst impedes its large-scale application in hydrogen generation, organic synthesis, nonferrous metal production and sewage disposal. Herein, we report the design and fabrication of a nanoporous TiMnCoCN compound based on the nanoscale Kirkendall effect, possessing an intriguing self-adjusting capability for the oxygen evolution reaction (OER) in a 0.5 M H2SO4 solution. The nanoporous TiMnCoCN compound electrode for the acidic OER displays a low overpotential of 143 mV for 10 mA cm-2 and exhibits no increase in potential over 50,000 s, which is ascribed to the self-adjusting ability, Carbon/nitrogen (C/N) incorporation and nanoporous architecture. The concentration of inert TiO2 on the reconstructed surface of the compound can self-adjust with the change in OER potential via a cobalt-dissolved vacancy approach according to the stabilization requirement. In this work, the self-reconstruction law of surface structure was discovered, providing a novel strategy for designing and fabricating nonnoble OER electrocatalysts with superior catalytic performance and robust stability in acidic media.

Hollow Mesoporous Molybdenum Single-Atom Nanozyme-Based Reactor for Enhanced Cascade Catalytic Antibacterial Therapy

Purpose

The remarkable peroxidase-like activity of single-atom nanozymes (SAzymes) allows them to catalyze the conversion of H2O2 to •OH, rendering them highly promising for antibacterial applications. However, their practical in vivo application is hindered by the near-neutral pH and insufficient H2O2 levels present in physiological systems. This study was aimed at developing a SAzyme-based nanoreactor and investigating its in vivo antibacterial activity.

Methods

We developed a hollow mesoporous molybdenum single-atom nanozyme (HMMo-SAzyme) using a controlled chemical etching approach and pyrolysis strategy. The HMMo-SAzyme not only exhibited excellent catalytic activity but also served as an effective nanocarrier. By loading glucose oxidase (GOx) with HMMo-SAzyme and encapsulating it with hyaluronic acid (HA), a nanoreactor (HMMo/GOx@HA) was constructed as glucose-triggered cascade catalyst for combating bacterial infection in vivo.

Results

Hyaluronidase (HAase) at the site of infection degraded HA, allowing GOx to convert glucose into gluconic acid and H2O2. An acid environment significantly enhanced the catalytic activity of HMMo-SAzyme to promote the further catalytic conversion of H2O2 to •OH for bacterial elimination. In vitro and in vivo experiments demonstrated that the nanoreactor had excellent antibacterial activity and negligible biological toxicity.

Conclusion

This study represents a significant advancement in developing a cascade catalytic system with high efficiency based on hollow mesoporous SAzyme, promising the advancement of biological applications of SAzyme.

Precise solid-phase synthesis of CoFe@FeOx nanoparticles for efficient polysulfide regulation in lithium/sodium-sulfur batteries

Complex metal nanoparticles distributed uniformly on supports demonstrate distinctive physicochemical properties and thus attract a wide attention for applications. The commonly used wet chemistry methods display limitations to achieve the nanoparticle structure design and uniform dispersion simultaneously. Solid-phase synthesis serves as an interesting strategy which can achieve the fabrication of complex metal nanoparticles on supports. Herein, the solid-phase synthesis strategy is developed to precisely synthesize uniformly distributed CoFe@FeOx core@shell nanoparticles. Fe atoms are preferentially exsolved from CoFe alloy bulk to the surface and then be carburized into a FexC shell under thermal syngas atmosphere, subsequently the formed FexC shell is passivated by air, obtaining CoFe@FeOx with a CoFe alloy core and a FeOx shell. This strategy is universal for the synthesis of MFe@FeOx (M = Co, Ni, Mn). The CoFe@FeOx exhibits bifunctional effect on regulating polysulfides as the separator coating layer for Li-S and Na-S batteries. This method could be developed into solid-phase synthetic systems to construct well distributed complex metal nanoparticles.

Tandem-biocatalysis reactors constructed by topological evolution of CaCO3 particles into hollow metal hydroxide spheres

Despite remarkable advances in the design and synthesis of hollow inorganic spheres (HISs), the harsh synthetic conditions have precluded the applications of HISs to biochemical and biological fields. Herein we report a biocompatible strategy for synthesizing metal hydroxide HISs (MH-HISs) by simply mixing CaCO3 particles with metal ions in water. The ion-exchange reaction between Ca2+ and metal ions leads to the structural and chemical evolution from solid CaCO3 particles to hollow MH-HISs via core-shell and yolk-shell structures, while enabling the encapsulation of enzymes to the shells without loss of catalytic activities. The biocompatible protocol makes multienzymatic cascade reactions achievable, with great recyclability due to mechanical durability of MH-HISs.

Electron Beam Induced Enhancement and Suppression of Oxidation in Cu Nanoparticles in Environmental Scanning Transmission Electron Microscopy

We have investigated the effects of high-energy electron irradiation on the oxidation of copper nanoparticles in environmental scanning transmission electron microscopy (ESTEM). The hemispherically shaped particles were oxidized in 3 mbar of O2 in a temperature range 100-200 °C. The evolution of the particles was recorded with sub-nanometer spatial resolution in situ in ESTEM. The oxidation encompasses the formation of outer and inner oxide shells on the nanoparticles, arising from the concurrent diffusion of copper and oxygen out of and into the nanoparticles, respectively. Our results reveal that the electron beam actively influences the reaction and overall accelerates the oxidation of the nanoparticles when compared to particles oxidized without exposure to the electron beam. However, the extent of this electron beam-assisted acceleration of oxidation diminishes at higher temperatures. Moreover, we observe that while oxidation through the outward diffusion of Cu+ cations is enhanced, the electron beam appears to hinder oxidation through the inward diffusion of O2- anions. Our results suggest that the impact of the high-energy electrons in ESTEM oxidation of Cu nanoparticles is mostly related to kinetic energy transfer, charging, and ionization of the gas environment, and the beam can both enhance and suppress reaction rates.

Hollow Cobalt Sulfide Nanospheres with Highly Enzyme-like Antibacterial Activities to Accelerate Infected Wound Healing

The emergence of nanozymes presents a promising alternative to antibiotics for reactive oxygen species-mediated broad-spectrum antimicrobial purposes, but nanozymes still face challenges of low therapeutic efficiency and poor biocompatibility. Herein, we creatively prepared a novel kind of hollow cobalt sulfide (CoS) nanospheres with a unique mesoporous structure that is able to provide numerous active sites for enzyme-like reactions. The results revealed that 50 μg/mL of CoS nanospheres exhibited strong peroxidase- and oxidase-like activities under physiological conditions with the assistance of a low concentration of hydrogen peroxide (H2O2, 100 μM) while possessing highly efficient GSH-depletion ability, which endowed CoS nanospheres with triple enzyme-like properties to combat bacterial infections. The in vitro experiments demonstrated that the CoS nanozyme displayed significant antibacterial effects against both Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli). The in vivo implantation showed that the synthesized CoS effectively eliminated bacteria and promoted the recovery of infected wounds in rats while exhibiting a low cytotoxicity. This study provides a promising treatment strategy to accelerate infected wound healing.

Fabrication of β-Ga2O3 Nanotubes via Sacrificial GaSb-Nanowire Templates

β-Ga2O3 nanostructures are attractive wide-band-gap semiconductor materials as they exhibit promising photoelectric properties and potential applications. Despite the extensive efforts on β-Ga2O3 nanowires, investigations into β-Ga2O3 nanotubes are rare since the tubular structures are hard to synthesize. In this paper, we report a facile method for fabricating β-Ga2O3 nanotubes using pre-synthesized GaSb nanowires as sacrificial templates. Through a two-step heating-treatment strategy, the GaSb nanowires are partially oxidized to form β-Ga2O3 shells, and then, the residual inner parts are removed subsequently in vacuum conditions, yielding delicate hollow β-Ga2O3 nanotubes. The length, diameter, and thickness of the nanotubes can be customized by using different GaSb nanowires and heating parameters. In situ transmission electron microscopic heating experiments are performed to reveal the transformation dynamics of the β-Ga2O3 nanotubes, while the Kirkendall effect and the sublimation process are found to be critical. Moreover, photoelectric tests are carried out on the obtained β-Ga2O3 nanotubes. A photoresponsivity of ~25.9 A/W and a detectivity of ~5.6 × 1011 Jones have been achieved with a single-β-Ga2O3-nanotube device under an excitation wavelength of 254 nm.

Confinement Effects in Carbonized ZIF-Confined Hollow PtCo Nanospheres Enable the Methanol Oxidation Reaction

Confinement effects in highly porous nanostructures can effectively adjust the selectivity and kinetics of electrochemical reactions, which can boost the methanol oxidation reaction (MOR). In this work, carbonized ZIF-8-confined hollow PtCo nanospheres (PtCo@carbonized ZIF-8) were fabricated using a facile strategy. A monodisperse confined region was successfully prepared, and the dispersion of the PtCo nanoparticles (NPs) could be precisely regulated, allowing for the effective tuning of the confined region. Thus, the precise regulation of the catalytic reaction was achieved. Importantly, hollow PtCo NPs were prepared using a method based on the Kirkendall effect, and their forming mechanism was systematically investigated. Because of the confinement effects of carbonized zeolitic imidazolate framework-8 (ZIF-8), the crystal and electronic structures of the PtCo NPs were able to be effectively tuned. Our electrochemical results show that PtCo@carbonized ZIF-8 composites manifest a higher mass activity (1.4 A mgPt-1) and better stability compared to commercial Pt/C.

Reactant enrichment in hollow void of Pt NPs@MnOx nanoreactors for boosting hydrogenation performance

In confined mesoscopic spaces, the unraveling of a catalytic mechanism with complex mass transfer and adsorption processes such as reactant enrichment is a great challenge. In this study, a hollow nanoarchitecture of MnOx-encapsulated Pt nanoparticles was designed as a nanoreactor to investigate the reactant enrichment in a mesoscopic hollow void. By employing advanced characterization techniques, we found that the reactant-enrichment behavior is derived from directional diffusion of the reactant driven through the local concentration gradient and this increased the amount of reactant. Combining experimental results with density functional theory calculations, the superior cinnamyl alcohol (COL) selectivity originates from the selective adsorption of cinnamaldehyde (CAL) and the rapid formation and desorption of COL in the MnOx shell. The superb performance of 95% CAL conversion and 95% COL selectivity is obtained at only 0.5 MPa H2 and 40 min. Our findings showcase that a rationally designed nanoreactor could boost catalytic performance in chemoselective hydrogenation, which can be of great aid and potential in various application scenarios.

Fabrication of ZnO/ZnAl2O4/Au Nanoarrays through DC Electrodeposition Utilizing Nanoporous Anodic Alumina Membranes for Environmental Application

In this study, anodic aluminum oxide membranes (AAOMs) and Au-coated AAOMs (AAOM/Au) with pore diameters of 55 nm and inter-pore spacing of 100 nm are used to develop ZnO/AAOM and ZnO/ZnAl2O4/Au nanoarrays of different morphologies. The effects of the electrodeposition current, time, barrier layer, and Au coating on the morphology of the resultant nanostructures were investigated using field emission scanning electron microscopy. Energy dispersive X-ray and X-ray diffraction were used to analyze the structural parameters and elemental composition of the ZnO/ZnAl2O4/Au nanoarray, and the Kirkendall effect was confirmed. The developed ZnO/ZnAl2O4/Au electrode was applied to remove organic dyes from aqueous solutions, including methylene blue (MB) and methyl orange (MO). Using a 3 cm2 ZnO/ZnAl2O4/Au sample, the 100% dye removal for 20 ppm MB and MO dyes at pH 7 and 25 °C was achieved after approximately 50 and 180 min, respectively. According to the kinetics analysis, the pseudo-second-order model controls the dye adsorption onto the sample surface. AAOM/Au and ZnO/ZnAl2O4/Au nanoarrays are also used as pH sensor electrodes. The sensing capability of AAOM/Au showed Nernstian behavior with a sensitivity of 65.1 mV/pH (R2 = 0.99) in a wide pH range of 2-9 and a detection limit of pH 12.6, whereas the ZnO/ZnAl2O4/Au electrode showed a slope of 40.1 ± 1.6 mV/pH (R2 = 0.996) in a pH range of 2-6. The electrode's behavior was more consistent with non-Nernstian behavior over the whole pH range under investigation. The sensitivity equation was given by V(mV) = 482.6 + 372.6 e-0.2095 pH at 25 °C with R2 = 1.0, which could be explained in terms of changes in the surface charge during protonation and deprotonation.

Partial Chemicalization of Nanoscale Metals: An Intra-Material Transformative Approach for the Synthesis of Functional Colloidal Metal-Semiconductor Nanoheterostructures

Heterostructuring colloidal nanocrystals into multicomponent modular constructs, where domains of distinct metal and semiconductor phases are interconnected through bonding interfaces, is a consolidated approach to advanced breeds of solution-processable hybrid nanomaterials capable of expressing richly tunable and even entirely novel physical-chemical properties and functionalities. To meet the challenges posed by the wet-chemical synthesis of metal-semiconductor nanoheterostructures and to overcome some intrinsic limitations of available protocols, innovative transformative routes, based on the paradigm of partial chemicalization, have recently been devised within the framework of the standard seeded-growth scheme. These techniques involve regiospecific replacement reactions on preformed nanocrystal substrates, thus holding great synthetic potential for programmable configurational diversification. This review article illustrates achievements so far made in the elaboration of metal-semiconductor nanoheterostructures with tailored arrangements of their component modules by means of conversion pathways that leverage on spatially controlled partial chemicalization of mono- and bi-metallic seeds. The advantages and limitations of these approaches are discussed within the context of the most plausible mechanisms underlying the evolution of the nanoheterostructures in liquid media. Representative physical-chemical properties and applications of chemicalization-derived metal-semiconductor nanoheterostructures are emphasized. Finally, prospects for developments in the field are outlined.

Yolk-shell structured magnetic mesoporous organosilica supported ionic liquid/Cu complex: an efficient nanocatalyst for the green synthesis of pyranopyrazoles

The preparation of yolk-shell structured magnetic mesoporous composites is a significant subject between researchers. Especially, modification of theses composites with ionic liquid/metal complex is very important for catalytic processes. In the present study, a novel magnetic methylene-based periodic mesoporous organosilica (PMO)-supported ionic liquid/Cu complex with yolk-shell structure (YS-Fe3O4@PMO/IL-Cu) was prepared via the soft template-assisted method. The TGA, FT-IR, SEM, EDX, XRD, VSM, nitrogen-sorption, and ICP techniques were employed to identify YS-Fe3O4@PMO/IL-Cu. The YS-Fe3O4@PMO/IL-Cu material was applied as a powerful nanocatalyst for the synthesis of pyranopyrazoles under ultrasonic media. The study demonstrated that the YS-Fe3O4@PMO/IL-Cu nanocatalyst is highly recyclable, selective, and effective. The leaching test was performed to investigate the nature of the designed catalyst under the applied conditions.

Design, Fabrication and Characterization of Multi-Yolk@Shell NiCuFe2 O4 @mSiO2 Mesoporous Nanocomposite Spheres for the Synthesis of Pyrimido-Quinolines under Solvent-Free Conditions

Multi-yolk@shell mesoporous silica spheres are becoming more and more attractive as high-performance catalysts because of their high surface areas, variable pore sizes, and low densities. In this work, a NiCuFe2 O4 magnetic core with a shell of mesoporous silica mesoporous has been prepared in an easy two-step procedure. The prepared multi-yolk@shell NiCuFe2 O4 @mSiO2 spheres were characterized by using FT-IR, XRD, VSM, EDX, BET, FE-SEM and HR-TEM techniques. These unique multi-yolk@shell NiCuFe2 O4 @mSiO2 spheres demonstrated high catalytic activity for the synthesis of pyrimidoquinolines. Also, this method exposes obvious benefits such as catalyst recyclability, easy reaction condition, simplicity of work up, high product yields and short reaction times.

Revealing Temperature-Dependent Oxidation Dynamics of Ni Nanoparticles via Ambient Pressure Transmission Electron Microscopy

Understanding the oxidation mechanism of metal nanoparticles under ambient pressure is extremely important to make the best use of them in a variety of applications. Through ambient pressure transmission electron microscopy, we in situ investigated the dynamic oxidation processes of Ni nanoparticles at different temperatures under atmospheric pressure, and a temperature-dependent oxidation behavior was revealed. At a relatively low temperature (e.g., 600 °C), the oxidation of Ni nanoparticles underwent a classic Kirkendall process, accompanied by the formation of oxide shells. In contrast, at a higher temperature (e.g., 800 °C), the oxidation began with a single crystal nucleus at the metal surface and then proceeded along the metal/oxide interface without voids formed during the whole process. Through our experiments and density functional theory calculations, a temperature-dependent oxidation mechanism based on Ni nanoparticles was proposed, which was derived from the discrepancy of gas adsorption and diffusion rates under different temperatures.

Controlled Synthesis and Uniform Anchoring of Hollow CuxO Nanocubes on Carbon Nanofiber for Enhanced Se(S)-Se(S) Bond Activation

In the present study, we fabricated hollow cubic Cu_xO nanoparticles (∼23 nm) incorporated with CNF (HC-Cu_xO/CNF) through controlled thermal oxidation of solid cubic Cu₂O nanoparticles (∼21 nm) supported on carbon nanofibers (SC-Cu₂O/CNF) under airflow, exploiting the nanoscale Kirkendall effect. These hollow Cu_xO nanocubes with increased surface areas exhibited outstanding catalytic activity for unsymmetrical chalcogenide synthesis under ligand-free conditions.

In Situ Electron Microscopy of Transformations of Copper Nanoparticles under Plasmonic Excitation

Metal nanoparticles are attracting interest for their light-absorption properties, but such materials are known to dynamically evolve under the action of chemical and physical perturbations, resulting in changes in their structure and composition. Using a transmission electron microscope equipped for optical excitation of the specimen, the structural evolution of Cu-based nanoparticles under simultaneous electron beam irradiation and plasmonic excitation was investigated with high spatiotemporal resolution. These nanoparticles initially have a Cu core-Cu₂O oxide shell structure, but over the course of imaging, they undergo hollowing via the nanoscale Kirkendall effect. We captured the nucleation of a void within the core, which then rapidly grows along specific crystallographic directions until the core is hollowed out. Hollowing is triggered by electron-beam irradiation; plasmonic excitation enhances the kinetics of the transformation likely by the effect of photothermal heating.

Recent Advances in the Development of Drug Delivery Applications of Magnetic Nanomaterials

With the predicted rise in the incidence of cancer, there is an ever-growing need for new cancer treatment strategies. Recently, magnetic nanoparticles have stood out as promising nanostructures for imaging and drug delivery systems as they possess unique properties. Moreover, magnetic nanomaterials functionalized with other compounds can lead to multicomponent nanoparticles with innovative structures and synergetic performance. The incorporation of chemotherapeutic drugs or RNA in magnetic drug delivery systems represents a promising alternative that can increase efficiency and reduce the side effects of anticancer therapy. This review presents a critical overview of the recent literature concerning the advancements in the field of magnetic nanoparticles used in drug delivery, with a focus on their classification, characteristics, synthesis and functionalization methods, limitations, and examples of magnetic drug delivery systems incorporating chemotherapeutics or RNA.

Multifunctional microwave absorption materials of multiscale cobalt sulfide/diatoms co-doped carbon aerogel

Microwave absorption materials (MAMs) have attracted much attention for their potential applications in stealth technology and prevention of electromagnetic pollution problems. Multifunctional MAMs are highly demanded because they can be applied in harsh environments. Hence, based on multiscale manipulation of atomic engineering, nanostructure and microstructure, a multiscale hollow cobalt sulfide/diatoms co-doped carbon aerogel was preparedthrough the physical crosslinking of divalent ions, unidirectional freezing, kirkendall effect, and heteroatomic doping. The aerogel with a low density of 13.1 mg/mm³ has a unique "lamellar-pillar" network structure due to the growth of ice crystals during the preparation process. With the assistance of thiourea, the doping of N, S atoms and the construction of hollow cobalt sulfide are accomplished simultaneously. The ingenious integration facilitates the synergistic effect of conductive loss, defect polarization, interfacial polarization, and multiple scattering. The multiscale hollow cobalt sulfide/diatoms co-doped carbon aerogel had a maximum reflection loss of -51.96 dB and an effective absorption bandwidth of 6.4 GHz, which is higher than that of other reported MAMs. It is further verified through finite element simulation and experiments that the aerogel has an excellent microwave absorption properties. In addition, the aerogel has excellent thermal insulation and flame retardant properties. Therefore, the development of this aerogel can help to use MAMs in complex applications.