Nanoengineering of Cathode Catalysts for Li-O2 Batteries

Lithium-oxygen (Li-O2) batteries have obtained widespread attention as next-generation energy storage systems due to their extremely high energy density. However, the high charge overpotential, attributed to the insulating property of Li2O2, significantly limits the energy efficiency and triggers solvent degradation. The high electrochemical activities of oxygen reduction reactions (ORR) and oxygen evolution reactions (OER) on the cathode are crucial for alleviating the high charging polarizations and enhancing the lifetime of Li-O2 batteries, which are also top challenges of state-of-art research. In this review, the scientific challenges and the proposed solutions in the development of cathode catalysts have been summarized. The recent research advancements on the nanoengineering of cathode catalysts for Li-O2 batteries have been comprehensively discussed, and the perspectives on the structure optimization are presented. Meanwhile, we have elucidated the structure-performance relationship between the electronic state and performance of the cathode catalysts at the nanoscale level. This review intends to provide guidelines for the design and construction of cathode catalysts in advanced Li-O2 batteries.

Recent development and applications of differential electrochemical mass spectrometry in emerging energy conversion and storage solutions

Electrochemical energy conversion and storage are playing an increasingly important role in shaping the sustainable future. Differential electrochemical mass spectrometry (DEMS) offers an operando and cost-effective tool to monitor the evolution of gaseous/volatile intermediates and products during these processes. It can deliver potential-, time-, mass- and space-resolved signals which facilitate the understanding of reaction kinetics. In this review, we show the latest developments and applications of DEMS in various energy-related electrochemical reactions from three distinct perspectives. (I) What is DEMS addresses the working principles and key components of DEMS, highlighting the new and distinct instrumental configurations for different applications. (II) How to use DEMS tackles practical matters including the electrochemical test protocols, quantification of both potential and mass signals, and error analysis. (III) Where to apply DEMS is the focus of this review, dealing with concrete examples and unique values of DEMS studies in both energy conversion applications (CO2 reduction, water electrolysis, carbon corrosion, N-related catalysis, electrosynthesis, fuel cells, photo-electrocatalysis and beyond) and energy storage applications (Li-ion batteries and beyond, metal-air batteries, supercapacitors and flow batteries). The recent development of DEMS-hyphenated techniques and the outlook of the DEMS technique are discussed at the end. As DEMS celebrates its 40th anniversary in 2024, we hope this review can offer electrochemistry researchers a comprehensive understanding of the latest developments of DEMS and will inspire them to tackle emerging scientific questions using DEMS.

Durable Perovskite Solar Cells with 24.5% Average Efficiency: The Role of Rigid Conjugated Core in Molecular Semiconductors

Efficient and robust n-i-p perovskite solar cells necessitate superior organic hole-transport materials with both mechanical and electronic prowess. Deciphering the structure-property relationship of these materials is crucial for practical perovskite solar cell applications. Through direct arylation, two high glass transition temperature molecular semiconductors, DBC-ETPA (202 °C) and TPE-ETPA (180 °C) are synthesized, using dibenzo[g,p]chrysene (DBC) and 1,1,2,2-tetraphenylethene (TPE) tetrabromides with triphenylene-ethylenedioxythiophene-dimethoxytriphenylamine (ETPA). In comparison to spiro-OMeTAD, both semiconductors exhibit shallower HOMO energy levels, resulting in increased hole densities (generated by air oxidation doping) and accelerated hole extraction from photoexcited perovskite. Experimental and theoretical studies highlight the more rigid DBC core, enhancing hole mobility due to reduced reorganization energy and lower energy disorder. Importantly, DBC-ETPA possesses a higher cohesive energy density, leading to lower ion diffusion coefficients and higher Young's moduli. Leveraging these attributes, DBC-ETPA is employed as the primary hole-transport layer component, yielding perovskite solar cells with an average efficiency of 24.5%, surpassing spiro-OMeTAD reference cells (24.0%). Furthermore, DBC-ETPA-based cells exhibit superior operational stability and 85 °C thermal storage stability.

Synthesis of High-Entropy Perovskite Hydroxides as Bifunctional Electrocatalysts for Oxygen Evolution Reaction and Oxygen Reduction Reaction

Oxygen reduction reaction (ORR) and oxygen evolutionc reaction (OER) are important chemical reactions for a rechargeable lithium-oxygen battery (LOB). Recently, high-entropy alloys and oxides have attracted much attention because they showed good electrocatalytic performance for oxygen evolution reaction (OER) and/or oxygen reduction reaction (ORR). In this study, we aimed to synthesize and characterize CoSn(OH)6 and two types of high-entropy perovskite hydroxides, that is, (Co0.2Cu0.2Fe0.2Mn0.2Mg0.2)Sn(OH)6 (CCFMMSOH) and (Co0.2Cu0.2Fe0.2Mn0.2Ni0.2)Sn(OH)6 (CCFMNSOH). TEM observation and XRD measurements revealed that the high-entropy hydroxides CCFMMSOH and CCFMNSOH had cubic crystals with sides of approximately 150-200 nm and crystal structures similar to those of perovskite-type CSOH. LSV measurement results showed that the high-entropy hydroxides CCFMMSOH and CCFMNSOH showed bifunctional catalytic functions for the ORR and OER. CCFMNSOH showed better catalytic performance than CCFMMSOH.

Photo-Assisted Rechargeable Metal Batteries: Principles, Progress, and Perspectives

The utilization of diverse energy storage devices is imperative in the contemporary society. Taking advantage of solar power, a significant environmentally friendly and sustainable energy resource, holds great appeal for future storage of energy because it can solve the dilemma of fossil energy depletion and the resulting environmental problems once and for all. Recently, photo-assisted energy storage devices, especially photo-assisted rechargeable metal batteries, are rapidly developed owing to the ability to efficiently convert and store solar energy and the simple configuration, as well as the fact that conventional Li/Zn-ion batteries are widely commercialized. Considering many puzzles arising from the rapid development of photo-assisted rechargeable metal batteries, this review commences by introducing the fundamental concepts of batteries and photo-electrochemistry, followed by an exploration of the current advancements in photo-assisted rechargeable metal batteries. Specifically, it delves into the elucidation of device components, operating principles, types, and practical applications. Furthermore, this paper categorizes, specifies, and summarizes several detailed examples of photo-assisted energy storage devices. Lastly, it addresses the challenges and bottlenecks faced by these energy storage systems while providing future perspectives to facilitate their transition from laboratory research to industrial implementation.

Recent Advances in Catalyst Design and Performance Optimization of Nanostructured Cathode Materials in Zinc-Air Batteries

This review focuses on the advanced design and optimization of nanostructured zinc-air batteries (ZABs), with the aim of boosting their energy storage and conversion capabilities. The findings show that ZABs favor porous nanostructures owing to their large surface area, and this enhances the battery capacity, catalytic activity, and life cycle. In addition, the nanomaterials improve the electrical conductivity, ion transport, and overall battery stability, which crucially reduces dendrite growth on the zinc anodes and improves cycle life and energy efficiency. To obtain a superior performance, the importance of controlling the operational conditions and using custom nanostructural designs, optimal electrode materials, and carefully adjusted electrolytes is highlighted. In conclusion, porous nanostructures and nanoscale materials significantly boost the energy density, longevity, and efficiency of Zn-air batteries. It is suggested that future research should focus on the fundamental design principles of these materials to further enhance the battery performance and drive sustainable energy solutions.

Constructing an Interlaced Catalytic Surface via Fluorine-Doped Bimetallic Oxides for Oxygen Electrode Processes in Li-O2 Batteries

Lithium-oxygen (Li-O2) batteries, renowned for their high theoretical energy density, have garnered significant interest as prime candidates for future electric device development. However, their actual capacity is often unsatisfactory due to the passivation of active sites by solid-phase discharge products. Optimizing the growth and storage of these products is a crucial step in advancing Li-O2 batteries. Here, a fluorine-doped bimetallic cobalt-nickel oxide (CoNiO2- xFx/CC) with an interlaced catalytic surface (ICS) and a corncob-like structure is proposed as an oxygen electrode. Unlike conventional oxide electrodes with a "single adsorption catalytic mechanism," the ICS of CoNiO2- xFx/CC offers a "competitive adsorption catalytic mechanism," where oxygen sites facilitate oxygen conversion while fluorine sites contribute to the growth of Li2O2. This results in a change in Li2O2 morphology from a surface film to toroidal particles, effectively preventing the burial of active sites. Additionally, the unique open architecture aids in the capture and release of oxygen and the formation of well-contacted Li2O2/electrode interfaces, which benefits the complete decomposition of Li2O2 products. Consequently, the Li-O2 battery with a CoNiO2- xFx/CC cathode demonstrates a high specific capacity of up to 30923 mAh g-1 and a lifespan exceeding 580 cycles, surpassing most reported metal oxide-based cathodes.

Nature of Li2O2 and its relationship to the mechanisms of discharge/charge reactions of lithium-oxygen batteries

Lithium-air batteries (LABs) are considered one of the most promising energy storage devices because of their large theoretical energy density. However, low cyclability caused by battery degradation prevents its practical use. Thus, to realize practical LABs, it is essential to improve cyclability significantly by understanding how the degradation processes proceed. Here, we used online mass spectrometry for real-time monitoring of gaseous products generated during charging of lithium-oxygen batteries (LOBs), which was operated with pure oxygen not air, with 1 M lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) tetraethylene glycol dimethyl ether (TEGDME) electrolyte solution. Linear voltage sweep (LVS) and voltage step modes were employed for charge instead of constant current charge so that the energetics of the product formation during the charge process can be understood more quantitatively. The presence of two distinctly different types of Li2O2, one being decomposed in a wide range of relatively low cell voltages (2.8-4.16 V) (l-Li2O2) and the other being decomposed at higher cell voltages than ca. 4.16 V (h-Li2O2), was confirmed by both LVS and step experiments. H2O generation started when the O2 generation rate reached a first maximum and CO2 generation took place accompanied by the decomposition of h-Li2O2. Based on the above results and the effects of discharge time and the use of isotope oxygen during discharge on product distribution during charge, the generation mechanism of O2, H2O, and CO2 during charging is discussed in relation to the reactions during discharge.

Self-Catalyzed Growth of Co4N and N-Doped Carbon Nanotubes toward Bifunctional Cathode for Highly Safe and Flexible Li-Air Batteries

The practical application of high-energy density lithium-oxygen (Li-O2) batteries is severely impeded by the notorious cycling stability and safety, which mainly comes from slow kinetics of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) at cathodes, causing inferior redox overpotentials and reactive lithium metal in flammable liquid electrolyte. Herein, a bifunctional electrode, a safe gel polymer electrolyte (GPE), and a robust lithium anode are proposed to alleviate above problems. The bifunctional electrode is composed of N-doped carbon nanotubes (N-CNTs) and Co4N by in situ chemical vapor deposition self-catalyzed growth on carbon cloth (N-CNTs@Co4N@CC). The self-supporting, binder-free N-CNTs@Co4N@CC electrode has a strong and stable three-dimensional (3D) interconnected conductive structure, which provides interconnectivity between the active sites and the electrode to promote the transfer of electrons. Furthermore, the N-CNT-intertwined Co4N ensures efficient catalytic activity. Hence, the electrode demonstrates improved electrochemical properties even under a large current density (2000 mA g-1) and long cycling operation (250 cycles). Moreover, a highly safe and flexible rechargeable cell using the 3D N-CNTs@Co4N@CC electrode, GPE, and robust lithium anode design has been explored. The open circuit voltage is stable at ∼3.0 V even after 9800 cycles, which proves the mechanical durability of the integrated GPE cell. The stable cable-type Li-air battery was demonstrated to stably drive the light-emitting diodes (LEDs), highlighting the reliability for practical use.

A series of isostructural metal-organic frameworks for an enhanced electro-catalytic oxygen evolution reaction

Three new isostructural MOFs (ZnTIA, CoTIA and CdTIA) were synthesized by the solvothermal synthesis of the organic linker 5-triazole isophthalic acid (5-TIA) with the transition metals Zn(II), Co(II) and Cd(II) in the presence of the structure directing agent tetramethyl ammonium chloride (TMA). These three MOFs were characterized thoroughly by ScXRD, PXRD, FT-IR, TGA, BET and SEM. They have excellent thermal and water stabilities. Among all these MOFs mentioned, pristine CoTIA exhibited excellent electrocatalytic activity toward the oxygen evolution reaction (OER). It exhibits a Tafel slope of 68.9 mV dec-1 with an overpotential of 337 mV at 10 mA cm-2 current density. The OER activity of the CoTIA MOF is relatively equivalent to that of the state-of-the-art catalyst (RuO2). Furthermore, the mechanical stability of crystalline ZnTIA, CoTIA and CdTIA MOFs was tested under ball mill pressure. The result showed that all the MOFs exhibit low tolerance to mechanical force because their structure was highly distorted or collapsed under such pressure, which is reflected by their poor electrocatalytic OER activity.

Sixty years of electrochemical optical spectroscopy: a retrospective

Sixty years ago, Reddy, Devanatan, and Bockris performed the first in situ electrochemical ellipsometry experiment, which ushered in a new era in the study of electrochemistry, using optical spectroscopy. After six decades of development, electrochemical optical spectroscopy, particularly electrochemical vibrational spectroscopy, has advanced from a phase of immaturity with few methods and limited applications to a phase of maturity with excellent substrate generality and significantly improved resolutions. Here, we divide the development of electrochemical optical spectroscopy into four phases, focusing on the proof-of-concept of different electrochemical optical spectroscopy studies, the emergence of plasmonic enhancement-based electrochemical optical spectroscopic (in particular vibrational spectroscopic) methods, the realization of electrochemical vibrational spectroscopy on well-defined surfaces, and the efforts to achieve operando spectroelectrochemical applications. Finally, we discuss the future development trend of electrochemical optical spectroscopy, as well as examples of new methodology and research paradigms for operando spectroelectrochemistry.

Sulfonyl Molecules Induced Oriented Lithium Deposition for Long-Term Lithium Metal Batteries

Dendrites growth and unstable interfacial Li+ transport hinder the practical application of lithium metal batteries (LMBs). Herein, we report an active layer of 2,4,6-trihydroxy benzene sulfonyl fluorine on copper substrate that induces oriented Li+ deposition and generates highly crystalline solid-electrolyte interphase (SEI) to achieve high-performance LMBs. The lithiophilic -SO2 - groups of highly crystalline SEI accept the rapidly transported Li+ ions and form a dense inner layer of LiF and Li3 N, which regulate Li+ plating morphology along the (110) crystal surface toward dendrite-free Li anode. Thus, Li||Cu cells with lithiophilic SEI achieve an average deposition efficiency of 99.8 % after 700 cycles, and Li||Li cells operate well for 1100 h. Besides, Li||LiNi0.8 Co0.1 Mn0.1 O2 cells with modified SEI exhibit a capacity retention that is 14 times than that of conventional SEI. Even at -60 °C, Li||Cu cells reach stable deposition efficiency of 83.2 % after 100 cycles.

Revitalization of Diluent Amide-Based Electrolyte for Building High-Voltage Lithium-Metal Batteries

Hitherto, highly concentrated electrolyte is the overarching strategy for revitalizing the usage of amide - in lithium-metal batteries (LMBs), which simultaneously mitigates the reactivity of amide toward Li and regulates uniform Li deposition via forming anion-solvated coordinate structure. However, it is undeniable that this would bring the cost burden for practical electrolyte preparation, which stimulates further electrolyte design toward tailoring anion-abundant Li+ solvation structure in stable amide electrolytes under a low salt content. Herein, a distinct method is conceived to design anions-enriched Li+ solvation structure in dilute amide-electrolyte (1 m Li-salt concentration) with the aid of integrating perfluoropolyethers (PFPE-MC) with anion-solvating ability and B/F-involved additives. The optimized electrolyte based on N,N-Dimethyltrifluoroacetamide (FDMAC) exhibits outstanding compatibility with Li and NCM622 cathode, facilitates uniform Li deposition along with robust solid electrolyte interphase (SEI) formation. Accordingly, both the lab-level LMB coin cell and practical pouch cell based on this dilute FDMAC electrolyte deliver remarkable performances with improved capacity and cyclability. This work pioneers the feasibility of diluted amide as electrolyte in LMB, and provides an innovative strategy for highly stable Li deposition via manipulating solvation structure within diluent electrolyte, impelling the electrolyte engineering development for practical high-energy LMBs.

Synergized N and P co-doped Ti3C2Tx mxene enabling high-performance Li-air batteries

Lithium-oxygen batteries (LOBs) with a theoretical energy density of up to 3500 Wh kg-1 hold a promise for the next-generation high-energy-density batteries. However, the slow oxygen reduction/evolution kinetics at the cathode limits the performance of Li-air batteries. The rational design of efficient catalysts is essential for the improvement of oxygen electrode reaction kinetics. Herein, we report a facile strategy to co-dope N and P atoms simultaneously into Ti3C2Tx (NP-Ti3C2Tx) MXene via an electrostatic self-assembly approach. The co-doped NP-Ti3C2Tx layers expose abundant active sites, providing more space for accommodating the formed Li2O2. Moreover, the N and P co-doping facilitates efficient electron transport in Ti3C2Tx MXene. The LOB with NP-Ti3C2TX catalyst delivers a high discharge capacity of 24,940 mAh/g at 1000 mA g-1. At a cut-off capacity of 1000 mAh/g, this battery runs continuously for 159, 276, 185, and 229 cycles at current densities of 1000, 2000, 3000, and 5000 mA g-1, respectively. Theoretical calculations unveil that N and P co-doping enables lower ηORR and ηOER of only 0.26 V and 0.13 V on Ti3C2Tx MXene, respectively. This work offers a feasible approach for constructing efficient MXene electrocatalysts for Li-air batteries.

Atomic-Scale Cryo-TEM Studies of the Electrochemistry of Redox Mediator in Li-O2 Batteries

Rechargeable aprotic lithium (Li)-oxygen battery (LOB) is a potential next-generation energy storage technology because of its high theoretical specific energy. However, the role of redox mediator on the oxide electrochemistry remains unclear. This is partly due to the intrinsic complexity of the battery chemistry and the lack of in-depth studies of oxygen electrodes at the atomic level by reliable techniques. Herein, cryo-transmission electron microscopy (cryo-TEM) is used to study how the redox mediator LiI affects the oxygen electrochemistry in LOBs. It is revealed that with or without LiI in the electrolyte, the discharge products are plate-like LiOH or toroidal Li2 O2 , respectively. The I2 assists the decomposition of LiOH via the formation of LiIO3 in the charge process. In addition, a LiI protective layer is formed on the Li anode surface by the shuttle of I3 - , which inhibits the parasitic Li/electrolyte reaction and improves the cycle performance of the LOBs. The LOBs returned to 2e- oxygen reduction reaction (ORR) to produce Li2 O2 after the LiI in the electrolyte is consumed. This work provides new insight on the role of redox mediator on the complex electrochemistry in LOBs which may aid the design LOBs for practical applications.

Polysulfides in Magnesium-Sulfur Batteries

Mg-S batteries hold great promise as a potential alternative to Li-based technologies. Their further development hinges on solving a few key challenges, including the lower capacity and poorer cycling performance when compared to Li counterparts. At the heart of the issues is the lack of knowledge on polysulfide chemical behaviors in the Mg-S battery environment. In this Review, a comprehensive overview of the current understanding of polysulfide behaviors in Mg-S batteries is provided. First, a systematic summary of experimental and computational techniques for polysulfide characterization is provided. Next, conversion pathways for Mg polysulfide species within the battery environment are discussed, highlighting the important role of polysulfide solubility in determining reaction kinetics and overall battery performance. The focus then shifts to the negative effects of polysulfide shuttling on Mg-S batteries. The authors outline various strategies for achieving an optimal balance between polysulfide solubility and shuttling, including the use of electrolyte additives, polysulfide-trapping materials, and dual-functional catalysts. Based on the current understanding, the directions for further advancing knowledge of Mg polysulfide chemistry are identified, emphasizing the integration of experiment with computation as a powerful approach to accelerate the development of Mg-S battery technology.

Electron Localization in Rationally Designed Pt1Pd Single-Atom Alloy Catalyst Enables High-Performance Li-O2 Batteries

Li-O2 batteries (LOBs) are considered as one of the most promising energy storage devices due to their ultrahigh theoretical energy density, yet they face the critical issues of sluggish cathode redox kinetics during the discharge and charge processes. Here we report a direct synthetic strategy to fabricate a single-atom alloy catalyst in which single-atom Pt is precisely dispersed in ultrathin Pd hexagonal nanoplates (Pt1Pd). The LOB with the Pt1Pd cathode demonstrates an ultralow overpotential of 0.69 V at 0.5 A g-1 and negligible activity loss over 600 h. Density functional theory calculations show that Pt1Pd can promote the activation of the O2/Li2O2 redox couple due to the electron localization caused by the single Pt atom, thereby lowering the energy barriers for the oxygen reduction and oxygen evolution reactions. Our strategy for designing single-atom alloy cathodic catalysts can address the sluggish oxygen redox kinetics in LOBs and other energy storage/conversion devices.

Dissolved LiO2 or adsorbed LiO2? The reactive superoxide during discharging process in lithium-oxygen batteries

Lithium-oxygen batteries are promising but have many challenges. Unlike lithium-ion batteries, they are usually discharge-charge cycled with capacity cutoff instead of potential cutoff, which brings controversy. Additionally, which superoxide intermediate, the dissolved or the adsorbed superoxide, is more reactive and leads to cell premature death and unsatisfactory discharge capacity? These questions puzzle researchers and impede the development of lithium-oxygen batteries. Herein, on one hand, we tried to decouple the influence of discharging potential and discharging current density on the discharge products and side reactions. We found that the electrode potential has more impact on the side reactions than the current density. The low potential leads to a high ratio of Li2CO3 to Li2O2 in the discharge product and hence more surface passivation. On the other hand, to identify the more reactive and aggressive species that cause surface passivation, a flow cell setup was applied to suppress the solution route and maximize the products from the surface route. Results show that more Li2CO3 was identified under a large flow rate and thus the intermediates in surface route appear to be more reactive than that in solution route.

Self-sufficient metal-air battery systems enabled by solid-ion conductive interphases

Metal-air batteries including Li-air, Na-air, Al-air, and Zn-air, have received significant scientific and technological interest for at least the last three decades. The interest stems primarily from the fact that the electrochemically active material (O2) in the cathode can in principle be harvested from the surroundings. In practice, however, parasitic reactions with reactive components other than oxygen in dry air passivate the anode, limit cycling stability of air-sensitive (e.g., Li, Na, Al) and electrolyte-sensitive (e.g., Zn) anodes, in most cases obviating the energy-density benefits of harvesting O2 from ambient air. As a compromise, so-called metal-oxygen batteries in which pure O2 is used as the active cathode material have been extensively studied but are understood to be of little practical relevance because of the large infrastructure required to produce the pure O2 stream. Here, we report on the design of solid-ion conductive chemically inert metal interphases that simultaneously protect a metal anode from parasitic reactions with electrolyte components and which facilitate rapid interfacial ion transport. Interphases composed of indium (In) are reported to be of particular interest for protecting Li and Na anodes from passivation in air whereas interphases composed of Sn are shown to prevent chemical and electrochemical corrosion of Zn anodes in alkaline electrolytes. We report further that these protections enable so-called self-sufficient metal-air batteries capable of extended cycling stability in ambient air environments.

Determinants of the Surface Film during the Discharging Process in Lithium-Oxygen Batteries

Lithium-oxygen batteries have one of the highest theoretical capacities and specific energies, but several challenges remain. One of them is premature death caused by a passivation layer with poor conductivities (both electronic and ionic) on the electrode surface during the discharge process. Once this thin layer forms on the surface of the catalyst and substrate, the overpotential significantly increases and causes early cell death. Therefore, understanding this thin layer is crucial to achieving high specific energy lithium-oxygen batteries. Herein, we quantitatively compared the ratio of lithium carbonate to lithium peroxide during the discharge process in a flow cell at different potentials. We found that the ratio rapidly increased at low potential and high flow rates. The surface route led to significant byproducts on the Au electrodes, and consequently, a 3 nm thick discharge product film passivates the electrode surface in a flow cell.

High-Yield Synthesis of Colloidal Carbon Rings and Their Applications in Self-Standing Electrodes of Li-O2 Batteries

The use of carbon materials in porous electrodes has impressive advantages. However, precisely tailoring the multilevel pore structure of carbon electrodes remains an unsolved challenge. Here, we report a highly efficient site-selective growth strategy to synthesize colloidal carbon rings by templating patchy droplets. Carbon rings are used for the direct fabrication of self-standing porous electrodes with hierarchical pores for lithium-oxygen batteries (LOBs). In situ atomic force microscopy reveals that during discharge the discharge products densely nucleate and grow on carbon rings, demonstrating that such rings are a very potential electrode material in LOBs. The hollow carbon ring electrode (HCRE) possesses micrometer-scale channels formed by random packing of rings and nanochannels consisting of ring-shaped hollow cavities connected by nanosized pores in the wall. Both channels contribute to ion transportation and gas diffusion, but the storage of the discharge products mainly lies in micrometer-scale channels, leading to a high discharge capacity of LOBs (20 658 mAh/g). Our work paves a new way to construct hierarchically porous electrodes for application in electrocatalysis and electrochemical energy storage.

Improved Performance in Li-S Batteries Due to In Situ CuS Formation from Cu Nanowires

Lithium-sulfur batteries offer theoretical capacities of 800-1600 mAh g-1 of active material and are therefore one of the most promising new battery chemistries currently under intensive study. However, the low electronic conductivity of the sulfur and the discharge products imposes energy penalties during the discharge and charge steps. In addition, the reduction of sulfur during discharge forms soluble polysulfides, which will diffuse to, and react with, the lithium metal anode. To address these two challenges, copper nanowires were introduced into the composite cathode to improve the electronic conductivity of the cathode and to provide electrostatic anchoring points for the formed polysulfide anions. The addition of the conductive copper nanowires resulted in the in situ formation of copper sulfide, which was shown to decrease the resistivity of the SEI layer on the anode, as manifested by diminished lithium plating and stripping overpotentials. Higher copper loadings exacerbated the dissolution of the copper sulfide during deep discharge and increased the concentration of displaced capping ligands in the electrolyte. Both phenomena generate species that react at the lithium anode, resulting in a more resistive SEI layer.

Toward Sustainable Metal-Iodine Batteries: Materials, Electrochemistry and Design Strategies

Due to the natural abundance of iodine, cost-effective, and sustainability, metal-iodine batteries are competitive for the next-generation energy storage systems with high energy density, and large power density. However, the inherent properties of iodine such as electronic insulation and shuttle behavior of soluble iodine species affect negatively rate performance, cyclability, and self-discharge behavior of metal-iodine batteries, while the dendrite growth and metal corrosion on the anode side brings potential safety hazards and inferior durability. These problems of metal-iodine system still exist and need to be solved urgently. Herein, we summarize the research progress of metal-iodine batteries in the past decades. Firstly, the classification, design strategy and reaction mechanism of iodine electrode are briefly outlined. Secondly, the current development and protection strategy of conventional metal anodes in metal-iodine batteries are highlighted, and some potential anode materials and their design strategies are proposed. Thirdly, the key electrochemical parameters of state-of-art metal-iodine batteries are compared and analyzed to solve critical issues for realizing next-generation iodine-based energy storage systems. Therefore, the aim of this review is to promote the development of metal-iodine batteries and provide guidelines for their design.

Intrinsic Stress-strain in Barium Titanate Piezocatalysts Enabling Lithium-Oxygen Batteries with Low Overpotential and Long Life

Rechargeable lithium-oxygen (Li-O2 ) batteries with high theoretical energy density are considered as promising candidates for portable electronic devices and electric vehicles, whereas their commercial application is hindered due to poor cyclic stability caused by the sluggish kinetics and cathode passivation. Herein, the intrinsic stress originated from the growth and decomposition of the discharge product (lithium peroxide, Li2 O2 ) is employed as a microscopic pressure resource to induce the built-in electric field, further improving the reaction kinetics and interfacial Lithium ion (Li+ ) transport during cycling. Piezopotential caused by the intrinsic stress-strain of solid Li2 O2 is capable of providing the driving force for the separation and transport of carriers, enhancing the Li+ transfer, and thus improving the redox reaction kinetics of Li-O2 batteries. Combined with a variety of in situ characterizations, the catalytic mechanism of barium titanate (BTO), a typical piezoelectric material, was systematically investigated, and the effect of stress-strain transformation on the electrochemical reaction kinetics and Li+ interface transport for the Li-O2 batteries is clearly established. The findings provide deep insight into the surface coupling strategy between intrinsic stress and electric fields to regulate the electrochemical reaction kinetics behavior and enhance the interfacial Li+ transport for battery system.

Optimizing Eg Orbital Occupancy of Transition Metal Sulfides by Building Internal Electric Fields to Adjust the Adsorption of Oxygenated Intermediates for Li-O2 Batteries

Li-O2 batteries are acknowledged as one of the most promising energy systems due to their high energy density approaching that of gasoline, but the poor battery efficiency and unstable cycling performance still hinder their practical application. In this work, hierarchical NiS2 -MoS2 heterostructured nanorods are designed and successfully synthesized, and it is found that heterostructure interfaces with internal electric fields between NiS2 and MoS2 optimized eg orbital occupancy, effectively adjusting the adsorption of oxygenated intermediates to accelerate reaction kinetics of oxygen evolution reaction and oxygen reduction reaction. Structure characterizations coupled with density functional theory calculations reveal that highly electronegative Mo atoms on NiS2 -MoS2 catalyst can capture more eg electrons from Ni atoms, and induce lower eg occupancy enabling moderate adsorption strength toward oxygenated intermediates. It is evident that hierarchical NiS2 -MoS2 nanostructure with fancy built-in electric fields significantly boosted formation and decomposition of Li2 O2 during cycling, which contributed to large specific capacities of 16528/16471 mAh g-1 with 99.65% coulombic efficiency and excellent cycling stability of 450 cycles at 1000 mA g-1 . This innovative heterostructure construction provides a reliable strategy to rationally design transition metal sulfides by optimizing eg orbital occupancy and modulating adsorption toward oxygenated intermediates for efficient rechargeable Li-O2 batteries.

High Areal Capacity, Long Cycle Life Li-Air Batteries Enabled by Nano/Micro Hierarchical Porous Cathode

The limited cycle life of Li-air batteries (LABs) with high areal capacity remains the chief challenge that hinders their practical applications. Here, the study proposes a hierarchical porous electrode (HPE) design strategy, in which porous MnO nanoflowers are built into mesopore/macropore electrodes through a combination of chemical dealloying and physical de-templating procedures. The MnO nanoflowers with 10-30 nm pore provides active sites to catalyze the O2 reduction and decomposition of discharged products. The 5-10 µm macroscopic pores in the cathode serve as channels of O2 transportation and facilitate the electrolyte permeation. The proposed HPE exhibits a full discharge capacity of 17.49 mAh cm-2 and stable cycle life >2000 h with a limited capacity of 6 mAh cm-2 . These results suggest that the HPE design strategy for LABs can simultaneously provide large capacity and robust cycle life, which is promising for advanced metal-air batteries.

Room-Temperature Solid-State Polymer Electrolyte in Li-LiFePO4 , Li-S and Li-O2 Batteries

A solid polymer electrolyte has been developed and employed in lithium-metal batteries of relevant interest. The material includes crystalline poly(ethylene glycol)dimethyl ether (PEGDME), LiTFSI and LiNO3 salts, and a SiO2 ceramic filler. The electrolyte shows ionic conductivity more than 10-4  S cm-1 at room temperature and approaching 10-3  S cm-1 at 60 °C, a Li+ -transference number exceeding 0.3, electrochemical stability from 0 to 4.4 V vs. Li+ /Li, lithium stripping/deposition overvoltage below 0.08 V, and electrode/electrolyte interphase resistance of 400 Ω. Thermogravimetry indicates that the electrolyte stands up to 200 °C without significant weight loss, while FTIR spectroscopy suggests that the LiTFSI conducting salt dissolves in the polymer. The electrolyte is used in solid-state cells with various cathodes, including LiFePO4 olivine exploiting the Li-insertion, sulfur-carbon composite operating through Li conversion, and an oxygen electrode in which reduction and evolution reactions (i. e., ORR/OER) evolve on a carbon-coated gas diffusion layer (GDL). The cells operate reversibly at room temperature with a capacity of 140 mA h g-1 at 3.4 V for LiFePO4 , 400 mA h g-1 at 2 V for sulfur electrode, and 500 mA h g-1 at 2.5 V for oxygen. The results suggest that the electrolyte could be applied in room-temperature solid polymer cells.

Insights into the solvation chemistry in liquid electrolytes for lithium-based rechargeable batteries

Lithium-based rechargeable batteries have dominated the energy storage field and attracted considerable research interest due to their excellent electrochemical performance. As indispensable and ubiquitous components, electrolytes play a pivotal role in not only transporting lithium ions, but also expanding the electrochemical stable potential window, suppressing the side reactions, and manipulating the redox mechanism, all of which are closely associated with the behavior of solvation chemistry in electrolytes. Thus, comprehensively understanding the solvation chemistry in electrolytes is of significant importance. Here we critically reviewed the development of electrolytes in various lithium-based rechargeable batteries including lithium-metal batteries (LMBs), nonaqueous lithium-ion batteries (LIBs), lithium-sulfur batteries (LSBs), lithium-oxygen batteries (LOBs), and aqueous lithium-ion batteries (ALIBs), and emphasized the effects of interactions between cations, anions, and solvents on solvation chemistry, and functions of solvation chemistry in different types of electrolytes (strong solvating electrolytes, moderate solvating electrolytes, and weak solvating electrolytes) on the electrochemical performance and redox mechanism in the abovementioned rechargeable batteries. Specifically, the significant effects of solvation chemistry on the stability of electrode-electrolyte interphases, suppression of lithium dendrites in LMBs, inhibition of the co-intercalation of solvents in LIBs, improvement of anodic stability at high cut-off voltages in LMBs, LIBs and ALIBs, regulation of redox pathways in LSBs and LOBs, and inhibition of hydrogen/oxygen evolution reactions in LOBs are thoroughly summarized. Finally, the review concludes with a prospective outlook, where practical issues of electrolytes, advanced in situ/operando techniques to illustrate the mechanism of solvation chemistry, and advanced theoretical calculation and simulation techniques such as "material knowledge informed machine learning" and "artificial intelligence (AI) + big data" driven strategies for high-performance electrolytes have been proposed.

Hyphenated DEMS and ATR-SEIRAS techniques for in situ multidimensional analysis of lithium-ion batteries and beyond

A wide spectrum of state-of-the-art characterization techniques have been devised to monitor the electrode-electrolyte interface that dictates the performance of electrochemical devices. However, coupling multiple characterization techniques to realize in situ multidimensional analysis of electrochemical interfaces remains a challenge. Herein, we presented a hyphenated differential electrochemical mass spectrometry and attenuated total reflection surface enhanced infrared absorption spectroscopy analytical method via a specially designed electrochemical cell that enables a simultaneous detection of deposited and volatile interface species under electrochemical reaction conditions, especially suitable for non-aqueous, electrolyte-based energy devices. As a proof of concept, we demonstrated the capability of the homemade setup and obtained the valuable reaction mechanisms, by taking the tantalizing reactions in non-aqueous lithium-ion batteries (i.e., oxidation and reduction processes of carbonate-based electrolytes on Li1+xNi0.8Mn0.1Co0.1O2 and graphite surfaces) and lithium-oxygen batteries (i.e., reversibility of the oxygen reaction) as model reactions. Overall, we believe that the coupled and complementary techniques reported here will provide important insights into the interfacial electrochemistry of energy storage materials (i.e., in situ, multi-dimensional information in one single experiment) and generate much interest in the electrochemistry community and beyond.

Nanoporous Gold: From Structure Evolution to Functional Properties in Catalysis and Electrochemistry

Nanoporous gold (NPG) is characterized by a bicontinuous network of nanometer-sized metallic struts and interconnected pores formed spontaneously by oxidative dissolution of the less noble element from gold alloys. The resulting material exhibits decent catalytic activity for low-temperature, aerobic total as well as partial oxidation reactions, the oxidative coupling of methanol to methyl formate being the prototypical example. This review not only provides a critical discussion of ways to tune the morphology and composition of this material and its implication for catalysis and electrocatalysis, but will also exemplarily review the current mechanistic understanding of the partial oxidation of methanol using information from quantum chemical studies, model studies on single-crystal surfaces, gas phase catalysis, aerobic liquid phase oxidation, and electrocatalysis. In this respect, a particular focus will be on mechanistic aspects not well understood, yet. Apart from the mechanistic aspects of catalysis, best practice examples with respect to material preparation and characterization will be discussed. These can improve the reproducibility of the materials property such as the catalytic activity and selectivity as well as the scope of reactions being identified as the main challenges for a broader application of NPG in target-oriented organic synthesis.

Boosting Li-O2 Battery Performance via Coupling of P-N Site-Rich N, P Co-Doped Graphene-Like Carbon Nanosheets with Nano-CePO4

Development of efficient and robust cathode catalysts is critical for the commercialization of Li-O₂ batteries (LOBs). Herein, a well-designed CePO₄ @N-P-CNSs cathode catalyst for LOBs via coupling P-N site-rich N, P co-doped graphene-like carbon nanosheets (N-P-CNSs) with nano-CePO₄ via a novel "in situ derivation" coupling strategy by in situ transforming the P atoms of P-C sites in N-P-CNSs to CePO₄ is reported. The CePO₄ @N-P-CNSs exhibit superior bifunctional ORR/OER activity relative to commercial Pt/C-RuO₂ with an overall overpotential of 0.64 V (vs RHE). Moreover, the LOB with CePO₄ @N-P-CNSs as the cathode catalyst delivers a low charge overpotential of 0.67 V (vs Li/Li⁺ ), high discharge capacity of 29774 mAh g^-1 at 100 mA g^-1 and long cycling stability of 415 cycles, respectively. The remarkably enhanced LOB performance is attributable to the in situ derived CePO₄ nanoparticles and the P-N sites in N-P-CNSs, which facilitate increased bifunctional ORR/OER activity, promote the rapid and effective decomposition of Li₂ O₂ and inhibit the formation of Li₂ CO₃ . This work may provide new inspiration for designing efficient, durable, and cost-effective cathode catalysts for LOBs.

Reversible Discharge Products in Li-Air Batteries

Lithium-air (Li-air) batteries stand out among the post-Li-ion batteries due to their high energy density, which has rapidly progressed in the past years. Regarding the fundamental mechanism of Li-air batteries that discharge products produced and decomposed during charging and recharging progress, the reversibility of products closely affects the battery performance. Along with the upsurge of the mainstream discharge products lithium peroxide, with devoted efforts to screening electrolytes, constructing high-efficiency cathodes, and optimizing anodes, much progress is made in the fundamental understanding and performance. However, the limited advancement is insufficient. In this case, the investigations of other discharge products, including lithium hydroxide, lithium superoxide, lithium oxide, and lithium carbonate, emerge and bring breakthroughs for the Li-air battery technologies. To deepen the understanding of the electrochemical reactions and conversions of discharge products in the battery, recent advances in the various discharge products, mainly focusing on the growth and decomposition mechanisms and the determining factors are systematically reviewed. The perspectives for Li-air batteries on the fundamental development of discharge products and future applications are also provided.

Regulating the reduction reaction pathways via manipulating the solvation shell and donor number of the solvent in Li-CO2 chemistry

Transforming CO2 into valuable chemicals is an inevitable trend in our current society. Among the viable end-uses of CO2, fixing CO2 as carbon or carbonates via Li-CO2 chemistry could be an efficient approach, and promising achievements have been obtained in catalyst design in the past. Even so, the critical role of anions/solvents in the formation of a robust solid electrolyte interphase (SEI) layer on cathodes and the solvation structure have never been investigated. Herein, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) in two common solvents with various donor numbers (DN) have been introduced as ideal examples. The results indicate that the cells in dimethyl sulfoxide (DMSO)-based electrolytes with high DN possess a low proportion of solvent-separated ion pairs and contact ion pairs in electrolyte configuration, which are responsible for fast ion diffusion, high ionic conductivity, and small polarization. The 3 M DMSO cell delivered the lowest polarization of 1.3 V compared to all the tetraethylene glycol dimethyl ether (TEGDME)-based cells (about 1.7 V). In addition, the coordination of the O in the TFSI- anion to the central solvated Li+ ion was located at around 2 Å in the concentrated DMSO-based electrolytes, indicating that TFSI- anions could access the primary solvation sheath to form an LiF-rich SEI layer. This deeper understanding of the electrolyte solvent property for SEI formation and buried interface side reactions provides beneficial clues for future Li-CO2 battery development and electrolyte design.

Highly Stable Garnet Fe2 Mo3 O12 Cathode Boosts the Lithium-Air Battery Performance Featuring a Polyhedral Framework and Cationic Vacancy Concentrated Surface

Lithium-air batteries (LABs), owing to their ultrahigh theoretical energy density, are recognized as one of the next-generation energy storage techniques. However, it remains a tricky problem to find highly active cathode catalyst operating within ambient air. In this contribution, a highly active Fe₂ Mo₃ O₁₂ (FeMoO) garnet cathode catalyst for LABs is reported. The experimental and theoretical analysis demonstrate that the highly stable polyhedral framework, composed of FeO octahedrons and MO tetrahedrons, provides a highly effective air catalytic activity and long-term stability, and meanwhile keeps good structural stability. The FeMoO electrode delivers a cycle life of over 1800 h by applying a simple half-sealed condition in ambient air. It is found that surface-rich Fe vacancy can act as an O₂ pump to accelerate the catalytic reaction. Furthermore, the FeMoO catalyst exhibits a superior catalytic capability for the decomposition of Li₂ CO₃ . H₂ O in the air can be regarded as the main contribution to the anode corrosion and the deterioration of LAB cells could be attributed to the formation of LiOH·H₂ O at the end of cycling. The present work provides in-depth insights to understand the catalytic mechanism in air and constitutes a conceptual breakthrough in catalyst design for efficient cell structure in practical LABs.

Metal-organic framework-derived advanced oxygen electrocatalysts as air-cathodes for Zn-air batteries: recent trends and future perspectives

Electrochemical energy storage devices with stable performance, high power output, and energy density are urgently needed to meet the global energy demand. Among the different electrochemical energy storage devices, batteries have become the most promising energy technologies and ranked as a highly investigated research subject. Recently, metal-air batteries especially Zn-air batteries (ZABs) have attracted enormous scientific interest in the electrochemical community due to their ease of operation, sustainability, environmental friendliness, and high efficiency. The oxygen electrocatalytic reactions [oxygen reduction reaction (ORR) and oxygen evolution reaction (OER)] are the two fundamental reactions for the development of ZABs. Noble metal-based electrocatalysts are widely considered as the benchmark for oxygen electrocatalysis, but their practical application in rechargeable ZAB is hindered due to several shortcomings. Thus, to replace noble metal-based catalysts, a wide range of transition-metal-based materials and heteroatom-doped metal-free carbon materials has been extensively investigated as oxygen electrocatalysts for ZABs. Recently, metal-organic frameworks (MOFs) with unique structural flexibility and uniformly dispersed active sites have become attractive precursors for the synthesis of a large variety of advanced functional materials. Herein, we summarize the recent progress of MOF-derived oxygen electrocatalysts (MOF-derived carbon nanomaterials, MOF-derived alloys/nanoparticles, and MOF-derived single-atom electrocatalysts) for ZABs. Specifically, we highlight MOF-derived single-atom electrocatalysts owing to the wide exploration of these emerging materials in electrocatalysis. The influence of the active sites, structural/compositional design, and porosity of MOF-derived advanced materials on the oxygen electrocatalytic performances is also discussed. Finally, the existing challenges and prospects of MOF-derived electrocatalysts in ZABs are briefly highlighted.

Single-Atom Pd-N4 Catalysis for Stable Low-Overpotential Lithium-Oxygen Battery

The critical challenge for Li-O₂ batteries lies in the large charge overpotential, leading to undesirable side reactions and inferior cycle stability. Single-atom catalysts have shown promising prospects in expediting the kinetics of oxygen evolution reaction (OER) for Li-O₂ batteries. However, a present practical drawback is the limited understanding of the correlation between the unique atomic structures and the OER mechanism. Herein, a template-assisted strategy is reported to synthesize atomically dispersed Pd anchored on N-doped carbon spheres as cathode catalysts. Benefiting from the well-defined Pd-N₄ moiety, the morphology and distribution of Li₂ O₂ products are distinctly regulated with optimized decomposition reversibility. Theoretical simulations reveal that the unique configuration of Pd-N₄ will contribute to the electron transfer from Pd atoms to the adjacent N atoms, which turns the originally electroneutral Pd into positively charged and downshifts the d-band center and therefore weakens its adsorption energy with the intermediates. The Li-O₂ batteries with Pd SAs/NC cathode achieve a charge overpotential of only 0.24 V and sustainable low-overpotential cycling stability (500 mA g^-1 ), and can retain a low charge voltage to a very high capacity of 10 000 mAh g^-1 . This work provides some insights into designing efficient single-atom catalysts for stable low-overpotential Li-O₂ batteries.

CO2 Capture Membrane for Long-Cycle Lithium-Air Battery

Lithium-air batteries (LABs) have attracted extensive attention due to their ultra-high energy density. At present, most LABs are operated in pure oxygen (O₂) since carbon dioxide (CO₂) under ambient air will participate in the battery reaction and generate an irreversible by-product of lithium carbonate (Li₂CO₃), which will seriously affect the performance of the battery. Here, to solve this problem, we propose to prepare a CO₂ capture membrane (CCM) by loading activated carbon encapsulated with lithium hydroxide (LiOH@AC) onto activated carbon fiber felt (ACFF). The effect of the LiOH@AC loading amount on ACFF has been carefully investigated, and CCM has an ultra-high CO₂ adsorption performance (137 cm³ g^-1) and excellent O₂ transmission performance by loading 80 wt% LiOH@AC onto ACFF. The optimized CCM is further applied as a paster on the outside of the LAB. As a result, the specific capacity performance of LAB displays a sharp increase from 27,948 to 36,252 mAh g^-1, and the cycle time is extended from 220 h to 310 h operating in a 4% CO₂ concentration environment. The concept of carbon capture paster opens a simple and direct way for LABs operating in the atmosphere.

Rational Design of Flexible Zn-Based Batteries for Wearable Electronic Devices

The advent of 5G and the Internet of Things has spawned a demand for wearable electronic devices. However, the lack of a suitable flexible energy storage system has become the "Achilles' Heel" of wearable electronic devices. Additional problems during the transformation of the battery structure from conventional to flexible also present a severe challenge to the battery design. Flexible Zn-based batteries, including Zn-ion batteries and Zn-air batteries, have long been considered promising candidates due to their high safety, eco-efficiency, substantial reserve, and low cost. In the past decade, researchers have come up with elaborate designs for each portion of flexible Zn-based batteries to improve the ionic conductivities, mechanical properties, environment adaptabilities, and scalable productions. It would be helpful to summarize the reported strategies and compare their pros and cons to facilitate further research toward the commercialization of flexible Zn-based batteries. In this review, the current progress in developing flexible Zn-based batteries is comprehensively reviewed, including their electrolytes, cathodes, and anodes, and discussed in terms of their synthesis, characterization, and performance validation. By clarifying the challenges in flexible Zn-based battery design, we summarize the methodology from previous investigations and propose challenges for future development. In the end, a research paradigm of Zn-based batteries is summarized to fit the burgeoning requirement of wearable electronic devices in an iterative process, which will benefit the future development of Zn-based batteries.

A stable solid-state lithium-oxygen battery enabled by heterogeneous silicon-based interface

Solid-state lithium-metal batteries using inorganic solid-state electrolyte (SSE) instead of liquid-electrolyte, especially lithium-oxygen (Li-O₂) battery, have attracted much more attention due to their high-energy density and safety. However, the poor interface contact between electrodes and SSEs makes these batteries lose most of their capacity and power during cycling. Here we report that by coating a heterogeneous silicon carbide on lithium metal anode and Li_1.5Al_0.5Ge_1.5P₃O₁₂(LAGP)-SSE, a good interface contact is created between the electrode and electrolyte that can effectively reduce the interface impedance and improve the cycle performance of the assembled battery. As a result, the solid-sate Li-O₂battery demonstrates a cycle lifespan of ∼78 cycles being at least 3-times higher than the solid-state Li-O₂battery without silicon carbide with a capacity limitation of 1000 mAh g^-1at 250 mA g^-1. The characterization of discharge products indicates a typical two-electron convention of oxygen-to-lithium oxide for the solid-state Li-O₂battery system. This work paves a way for developing high-energy long-cycle solid-state lithium-metal battery. The work provides insights into the interface between the Li-metal and SSE to develop high-energy long-cycle all solid-state Li-metal batteries.

Real time monitoring of generation and decomposition of degradation products in lithium oxygen batteries during discharge/charge cycles by an online cold trap pre-concentrator-gas chromatography/mass spectroscopy system

Degradation products of lithium oxygen batteries with a tetraethylene glycol dimethyl ether (TEGDME) electrolyte solution during discharge/charge cycles were monitored by an online cold trap pre-concentrator-gas chromatography/mass spectroscopy system in real time. A total of 37 peaks were detected and 27 of them were assigned to specific molecules. Degradation compounds were generated and decomposed in very complex manners during discharge/charge cycles. Most molecules were generated during charge as a result of the degradation of TEGDME by active oxygen species and/or electrochemical oxidation. These molecules generated during charge were decomposed during discharge by active oxygen species.

Ionic Liquid Electrolyte with Weak Solvating Molecule Regulation for Stable Li Deposition in High-Performance Li-O2 Batteries

Li-O₂ batteries with bis(trifluoromethanesulfonyl)imide-based ionic liquid (TFSI-IL) electrolyte are promising because TFSI-IL can stabilize O₂ ^- to lower charge overpotential. However, slow Li⁺ transport in TFSI-IL electrolyte causes inferior Li deposition. Here we optimize weak solvating molecule (anisole) to generate anisole-doped ionic aggregate in TFSI-IL electrolyte. Such unique solvation environment can realize not only high Li⁺ transport parameters but also anion-derived solid electrolyte interface (SEI). Thus, fast Li⁺ transport is achieved in electrolyte bulk and SEI simultaneously, leading to robust Li deposition with high rate capability (3 mA cm^-2 ) and long cycle life (2000 h at 0.2 mA cm^-2 ). Moreover, Li-O₂ batteries show good cycling stability (a small overpotential increase of 0.16 V after 120 cycles) and high rate capability (1 A g^-1 ). This work provides an effective electrolyte design principle to realize stable Li deposition and high-performance Li-O₂ batteries.

Covalent organic frameworks with Ni-Bis(dithiolene) and Co-porphyrin units as bifunctional catalysts for Li-O2 batteries

The rational design of efficient and stable catalysts for the oxygen reduction reaction and oxygen evolution reaction (ORR/OER) is the key to improving Li-O₂ battery performance. Here, we report the construction of ORR/OER bifunctional cathode catalysts in a covalent organic framework (COF) platform by simultaneously incorporating Ni-bis(dithiolene) and Co-porphyrin units. The resulting bimetallic Ni/Co-COF exhibits high surface area, fairly good electrical conductivity, and excellent chemical stability. Li-O₂ batteries with the Ni/Co-COF-based cathode show a low discharge/charge potential gap (1.0 V) and stable cycling (200 cycles) at a current density of 500 mA g^-1, rivaling that of PtAu nanocrystals. Density functional theory computations and control experiments using nonmetal or single metal-based isostructural COFs reveal the critical role of Ni and Co sites in reducing the discharge/charge overpotentials and regulating the Li₂O₂ deposition. This work highlights the advantage of bimetallic COFs in the rational design of efficient and stable Li-O₂ batteries.

Working at room temperature

A solid-state electrolyte enables a lithium-air battery to operate at 25°C.

A room temperature rechargeable Li2O-based lithium-air battery enabled by a solid electrolyte

A lithium-air battery based on lithium oxide (Li₂O) formation can theoretically deliver an energy density that is comparable to that of gasoline. Lithium oxide formation involves a four-electron reaction that is more difficult to achieve than the one- and two-electron reaction processes that result in lithium superoxide (LiO₂) and lithium peroxide (Li₂O₂), respectively. By using a composite polymer electrolyte based on Li₁₀GeP₂S₁₂ nanoparticles embedded in a modified polyethylene oxide polymer matrix, we found that Li₂O is the main product in a room temperature solid-state lithium-air battery. The battery is rechargeable for 1000 cycles with a low polarization gap and can operate at high rates. The four-electron reaction is enabled by a mixed ion-electron-conducting discharge product and its interface with air.

Reversible Conversion between Lithium Superoxide and Lithium Peroxide: A Closed “Lithium–Oxygen” Battery

Lithium–air batteries have become a desirable research direction in the field of green energy due to their large specific capacity and high energy density. The current research mainly focuses on an open system continuously supplying high-purity oxygen or air. However, factors such as water and CO2 in the open system and liquid electrolytes’ evaporation will decrease battery performance. To improve the practical application of lithium–air batteries, developing a lithium–oxygen battery that does not need a gaseous oxygen supply is desirable. In this study, we designed a closed lithium–oxygen battery model based on the conversion of lithium superoxide and lithium peroxide (LiO2 + e− + Li+ ↔ Li2O2). Herein, the Pd-rGO as a catalyst will produce the LiO2 in the pre-discharge process, and the closed battery can cycle over 57 cycles stably. In addition to in situ Raman spectra, electrochemical quartz crystal microbalance (EQCM) and differential electrochemical mass spectrometry (DEMS) have been applied to explanation the conversion between LiO2 and Li2O2 during the charge–discharge process. This work paves the way to introduce a new closed “lithium–oxygen” battery system for developing large-capacity green energy.

Recent Progress in Developing a LiOH-Based Reversible Nonaqueous Lithium-Air Battery

The realization of practical nonaqueous lithium-air batteries (LABs) calls for novel strategies to address their numerous theoretical and technical challenges. LiOH formation/decomposition has recently been proposed as a promising alternative route to cycling LABs via Li₂ O₂ . Herein, the progress in developing LiOH-based nonaqueous LABs is reviewed. Various catalytic systems, either soluble or solid-state, that can activate a LiOH-based electrochemistry are compared in detail, with emphasis in providing an updated understanding of the oxygen reduction and evolution reactions in nonaqueous media. We identify the key factors that can switch the cell chemistry between Li₂ O₂  and LiOH and highlight the debate around these routes, as well as rationalize potential causes for these opposing opinions. The identities of the reaction intermediates, activity of redox mediators and additives, location of reaction interfaces, causes of parasitic reactions, as well as the effect of CO₂  on the LiOH electrochemistry, all play a critical role in altering the relative rates of a series of interconnected reactions and all warrant further investigation.

Hybrid-Solvent Electrolytes for Enhanced Potassium-Oxygen Battery Performance

Rechargeable potassium-oxygen batteries (KOB) are promising next-generation energy storage devices because of the highly reversible O₂/O₂^- redox reactions during battery charge and discharge. However, the complicated cathode reaction processes seriously jeopardize the battery reaction kinetics and discharge capacity. Herein, we propose a hybrid-solvent strategy to effectively tune the K⁺ solvation structure, which demonstrates a critical influence on the charge-transfer kinetics and cathode reaction mechanism. The cosolvation of K⁺ by 1,2-dimethoxyethane (DME) and dimethyl sulfoxide (DMSO) could greatly decrease overpotentials for the cathode processes and increase the cathode discharge capacity. Furthermore, the Coulombic efficiency for the cathode could be significantly improved with the enhanced solution-mediated KO₂ growth and stripping during cycling. This work provides a promising electrolyte design approach to improve the electrochemical performance of the KOB.

Light-Assisted Metal-Air Batteries: Progress, Challenges, and Perspectives

Metal-air batteries are considered one of the most promising next-generation energy storage devices owing to their ultrahigh theoretical specific energy. However, sluggish cathode kinetics (O₂ and CO₂ reduction/evolution) result in large overpotentials and low round-trip efficiencies which seriously hinder their practical applications. Utilizing light to drive slow cathode processes has increasingly becoming a promising solution to this issue. Considering the rapid development and emerging issues of this field, this Review summarizes the current understanding of light-assisted metal-air batteries in terms of configurations and mechanisms, provides general design strategies and specific examples of photocathodes, systematically discusses the influence of light on batteries, and finally identifies existing gaps and future priorities for the development of practical light-assisted metal-air batteries.