The principles of cascading power limits in small, fast biological and engineered systems

Comparison of water and terrestrial jumping in natural and robotic insects

Jumping requires high actuation power for achieving high speed in a short time. Especially, organisms and robots at the insect scale jump in order to overcome size limits on the speed of locomotion. As small jumpers suffer from intrinsically small power output, efficient jumpers have devised various ingenuous schemes to amplify their power release. Furthermore, semi-aquatic jumpers have adopted specialized techniques to fully exploit the reaction from water. We review jumping mechanisms of natural and robotic insects that jump on the ground and the surface of water, and compare the performance depending on their scale. We find a general trend that jumping creatures maximize jumping speed by unique mechanisms that manage acceleration, force, and takeoff duration under the constraints mainly associated with their size, shape, and substrate.

Reversible kink instability drives ultrafast jumping in nematodes and soft robots

Entomopathogenic nematodes (EPNs) exhibit a bending-elastic instability, or kink, before becoming airborne, a feature hypothesized but not proven to enhance jumping performance. Here, we provide the evidence that this kink is crucial for improving launch performance. We demonstrate that EPNs actively modulate their aspect ratio, forming a liquid-latched closed loop over a slow timescale O (1 s), then rapidly open it O (10 µs), achieving heights of 20 body lengths (BL) and generating ∼ 10 4 W/Kg of power. Using jumping nematodes, a bio-inspired Soft Jumping Model (SoftJM), and computational simulations, we explore the mechanisms and implications of this kink. EPNs control their takeoff direction by adjusting their head position and center of mass, a mechanism verified through phase maps of jump directions in simulations and SoftJM experiments. Our findings reveal that the reversible kink instability at the point of highest curvature on the ventral side enhances energy storage using the nematode's limited muscular force. We investigated the impact of aspect ratio on kink instability and jumping performance using SoftJM, and quantified EPN cuticle stiffness with AFM, comparing it with C. elegans . This led to a stiffness-modified SoftJM design with a carbon fiber backbone, achieving jumps of ∼25 BL. Our study reveals how harnessing kink instabilities, a typical failure mode, enables bidirectional jumps in soft robots on complex substrates like sand, offering a novel approach for designing limbless robots for controlled jumping, locomotion, and even planetary exploration.

Multimodal Autonomous Locomotion of Liquid Crystal Elastomer Soft Robot

Self-oscillation phenomena observed in nature serve as extraordinary inspiration for designing synthetic autonomous moving systems. Converting self-oscillation into designable self-sustained locomotion can lead to a new generation of soft robots that require minimal/no external control. However, such locomotion is typically constrained to a single mode dictated by the constant surrounding environment. In this study, a liquid crystal elastomer (LCE) robot capable of achieving self-sustained multimodal locomotion, with the specific motion mode being controlled via substrate adhesion or remote light stimulation is presented. Specifically, the LCE is mechanically trained to undergo repeated snapping actions to ensure its self-sustained rolling motion in a constant gradient thermal field atop a hotplate. By further fine-tuning the substrate adhesion, the LCE robot exhibits reversible transitions between rolling and jumping modes. In addition, the rolling motion can be manipulated in real time through light stimulation to perform other diverse motions including turning, decelerating, stopping, backing up, and steering around complex obstacles. The principle of introducing an on-demand gate control offers a new venue for designing future autonomous soft robots.

Moth resonant mechanics are tuned to wingbeat frequency and energetic demands

An insect's wingbeat frequency is a critical determinant of its flight performance and varies by multiple orders of magnitude across Insecta. Despite potential energetic benefits for an insect that matches its wingbeat frequency to its resonant frequency, recent work has shown that moths may operate off their resonant peak. We hypothesized that across species, wingbeat frequency scales with resonance frequency to maintain favourable energetics, but with an offset in species that use frequency modulation as a means of flight control. The moth superfamily Bombycoidea is ideal for testing this hypothesis because their wingbeat frequencies vary across species by an order of magnitude, despite similar morphology and actuation. We used materials testing, high-speed videography and a model of resonant aerodynamics to determine how components of an insect's flight apparatus (stiffness, wing inertia, muscle strain and aerodynamics) vary with wingbeat frequency. We find that the resonant frequency of a moth correlates with wingbeat frequency, but resonance curve shape (described by the Weis-Fogh number) and peak location vary within the clade in a way that corresponds to frequency-dependent biomechanical demands. Our results demonstrate that a suite of adaptations in muscle, exoskeleton and wing drive variation in resonant mechanics, reflecting potential constraints on matching wingbeat and resonant frequencies.

Design and control of jumping microrobots with torque reversal latches

Jumping microrobots and insects power their impressive leaps through systems of springs and latches. Using springs and latches, rather than motors or muscles, as actuators to power jumps imposes new challenges on controlling the performance of the jump. In this paper, we show how tuning the motor and spring relative to one another in a torque reversal latch can lead to an ability to control jump output, producing either tuneable (variable) or stereotyped jumps. We develop and utilize a simple mathematical model to explore the underlying design, dynamics, and control of a torque reversal mechanism, provides the opportunity to achieve different outcomes through the interaction between geometry, spring properties, and motor voltage. We relate system design and control parameters to performance to guide the design of torque reversal mechanisms for either variable or stereotyped jump performance. We then build a small (356 mg) microrobot and characterize the constituent components (e.g. motor and spring). Through tuning the actuator and spring relative to the geometry of the torque reversal mechanism, we demonstrate that we can achieve jumping microrobots that both jump with different take-off velocities given the actuator input (variable jumping), and those that jump with nearly the same take-off velocity with actuator input (stereotyped jumping). The coupling between spring characteristics and geometry in this system has benefits for resource-limited microrobots, and our work highlights design combinations that have synergistic impacts on output, compared to others that constrain it. This work will guide new design principles for enabling control in resource-limited jumping microrobots.

Spatio-temporal distribution and genetic background of elastic proteins inside the chitin/chitosan matrix of insects including their functional significance for locomotion

In insects, cuticle proteins interact with chitin and chitosan of the exoskeleton forming crystalline, amorphic or composite material structures. The biochemical and mechanical composition of the structure defines the cuticle's physical properties and thus how the insect cuticle behaves under mechanical stress. The tissue-specific ratio between chitin and chitosan and its pattern of deacetylation are recognized and interpreted by cuticle proteins depending on their local position in the body. Despite previous research, the assembly of the cuticle composites in time and space including its functional impact is widely unexplored. This review is devoted to the genetics underlying the temporal and spatial distribution of elastic proteins and the potential function of elastic proteins in insects with a focus on Resilin in the fruit fly Drosophila. The potential impact and function of localized patches of elastic proteins is discussed for movements in leg joints, locomotion and damage resistance of the cuticle. We conclude that an interdisciplinary research approach serves as an integral example for the molecular mechanisms of generation and interpretation of the chitin/chitosan matrix, not only in Drosophila but also in other arthropod species, and might help to synthesize artificial material composites.

Why animals can outrun robots

Animals are much better at running than robots. The difference in performance arises in the important dimensions of agility, range, and robustness. To understand the underlying causes for this performance gap, we compare natural and artificial technologies in the five subsystems critical for running: power, frame, actuation, sensing, and control. With few exceptions, engineering technologies meet or exceed the performance of their biological counterparts. We conclude that biology's advantage over engineering arises from better integration of subsystems, and we identify four fundamental obstacles that roboticists must overcome. Toward this goal, we highlight promising research directions that have outsized potential to help future running robots achieve animal-level performance.

A Millimeter-Scale Multilocomotion Microrobot Capable of Controlled Crawling and Jumping

Insects and animals in nature generally have powerful muscles to guarantee their complex motion, such as crawling, running, and jumping. It is challenging for insect-sized robots to achieve controlled crawling and jumping within the scale of millimeters and milligrams. This article proposes a novelty bionic muscle actuator, where an electrical pulse is applied to generate joule heat to expand the actuator's chamber. Under the restoring force of the spring element, the chamber contracts back to the initial state to finish a complete cycle. The actuator can obtain high-frequency vibration under the high-frequency electrical signal. We propose a microrobot based on the novelty actuator to achieve controlled crawling and jumping over the obstacle of the millimeter-sized robot. The robot is fabricated with two actuators as a crawling module and one actuator as a jumping module, with a mass of 52 mg, length of 9.3 mm, width of 9.1 mm, and height of 4 mm. The microrobot has a maximum crawling turning velocity of 0.73 rad/s, a maximum jump height of 42 mm (10.5 times body height), and a maximum jump velocity of 0.91 m/s. This study extends the potential for applying the novelty bionic-muscle actuator to the microrobot.

A morphofunctional study of the jumping apparatus in globular springtails

Springtails are notable for their jumping apparatus and latch-mediated spring mechanism. The challenge, in the light of the tiny size and rapid movement of these organisms, has been to understand the morphological intricacies of this spring system. This study takes an approach that integrates SEM, MicroCT, cLSM and high-speed video recordings to understand the composition and functionality of the jumping apparatus in Megalothorax minimus (Neelipleona), Dicyrtomina ornata and Dicyrtomina minuta (Symphypleona). We focus on reconstructing, describing, and understanding the functioning of structures such as basal plates, musculature and furca. The dimensions of the jumping apparatus in Dicyrtomina and Megalothorax differ significantly from those in elongated springtails. A hypothesis of functional coherence between taxa, based on muscle connections and basal plates, is postulated. High-speed video recordings provide information on: 1) furca release timing and function during jumping and self-righting; 2) performance properties of manubrium, dens and mucro in interaction with the ground and in take-off; 3) possible pre-release furca moves. The study underscores the need for further research employing a variety of visualization methods in order to explore additional aspects such as retinaculum unlatching and furca flexion/extension muscles.

Stenus-inspired, swift, and agile untethered insect-scale soft propulsors

Mimicking living creatures, soft robots exhibit incomparable adaptability and various attractive new features. However, untethered insect-scale soft robots are often plagued with inferior controllability and low kinetic performance. Systematically inspired by the swift swingable abdomen, conducting canals for secretion transport, and body setae of Stenus comma, together with magnetic-induced fast-transformed postures, herein, we present a swift, agile untethered millimetre-scale soft propulsor propelling on water. The demonstrated propulsor, with a body length (BL) of 3.6 mm, achieved a recorded specific speed of ~201 BL/s and acceleration of ~8,372 BL/s2. The comprehensive kinetic performance of this propulsor surpasses those of previous ones at similar scales by several orders. Notably, we discovered momentum-transfer-induced over-biological on-demand braking (deceleration ~-5,010 BL/s2) and elucidated the underlying hydrodynamics. This work offers new insights into systematically bio-inspired artificial insect-scale soft robots, enabling them to push boundaries in performance, and potentially revolutionizing robot design, optimization, and control paradigms.

Honeybee comb-inspired stiffness gradient-amplified catapult for solid particle repellency

Natural surfaces that repel foreign matter are ubiquitous and crucial for living organisms. Despite remarkable liquid repellency driven by surface energy in many organisms, repelling tiny solid particles from surfaces is rare. The main challenge lies in the unfavourable scaling of inertia versus adhesion in the microscale and the inability of solids to release surface energy. Here we report a previously unexplored solid repellency on a honeybee's comb: a catapult-like effect to immediately eject pollen after grooming dirty antennae for self-cleaning. Nanoindentation tests revealed the 38-μm-long comb features a stiffness gradient spanning nearly two orders of magnitude from ~25 MPa at the tip to ~645 MPa at the base. This significantly augments the elastic energy storage and accelerates the subsequent conversion into kinetic energy. The reinforcement in energy storage and conversion allows the particle's otherwise weak inertia to outweigh its adhesion, thereby suppressing the unfavourable scaling effect and realizing solid repellency that is impossible in conventional uniform designs. We capitalize on this to build an elastomeric bioinspired stiffness-gradient catapult and demonstrate its generality and practicality. Our findings advance the fundamental understanding of natural catapult phenomena with the potential to develop bioinspired stiffness-gradient materials, catapult-based actuators and robotic cleaners.

Control of high-speed jumps in muscle and spring actuated systems: a comparative study of take-off energetics in bush-crickets (Mecopoda elongata) and locusts (Schistocerca gregaria)

The Orthoptera are a diverse insect order well known for their locomotive capabilities. To jump, the bush-cricket uses a muscle actuated (MA) system in which leg extension is actuated by contraction of the femoral muscles of the hind legs. In comparison, the locust uses a latch mediated spring actuated (LaMSA) system, in which leg extension is actuated by the recoil of spring-like structure in the femur. The aim of this study was to describe the jumping kinematics of Mecopoda elongata (Tettigoniidae) and compare this to existing data in Schistocerca gregaria (Acrididae), to determine differences in control of rotation during take-off between similarly sized MA and LaMSA jumpers. 269 jumps from 67 individuals of M. elongata with masses from 0.014 g to 3.01 g were recorded with a high-speed camera setup. In M. elongata, linear velocity increased with mass0.18 and the angular velocity (pitch) decreased with mass-0.13. In S. gregaria, linear velocity is constant and angular velocity decreases with mass-0.24. Despite these differences in velocity scaling, the ratio of translational kinetic energy to rotational kinetic energy was similar for both species. On average, the energy distribution of M. elongata was distributed 98.8% to translational kinetic energy and 1.2% to rotational kinetic energy, whilst in S. gregaria it is 98.7% and 1.3%, respectively. This energy distribution was independent of size for both species. Despite having two different jump actuation mechanisms, the ratio of translational and rotational kinetic energy formed during take-off is fixed across these distantly related orthopterans.

Analysis of Rowing Force of the Water Strider Middle Leg by Direct Measurement Using a Bio-Appropriating Probe and by Indirect Measurement Using Image Analysis

Rowing force of the middle leg of a water strider is one of the important factors affecting water repellency and applications in biomimetics, biomechanics, and biology. However, many previous studies have been based on estimated leg rowing force and lack some credibility. Therefore, we tried to measure leg rowing force directly by a force transducer. In this article, we report the rowing force of water striders obtained by direct and indirect measurements. In the direct measurement, water striders were set onto a sensor system and the rowing force of a middle leg of the set water striders was directly measured using a bio-appropriating probe (BAP), a kind of hook. In the indirect measurement, water striders were not fixed and the rowing force of locomoting water striders was evaluated by image analysis using a high-speed camera. As a result, we determined the rowing force by the direct measurement to be 955 μN, while the rowing force by the indirect measurement was 493 μN. We considered that the indirect measurement might lack some credibility because half the propellant energy was lost in the indirect force measurement due to various other factors.

Simulated biomechanical performance of morphologically disparate ant mandibles under bite loading

Insects evolved various modifications to their mouthparts, allowing for a broad exploration of feeding modes. In ants, workers perform non-reproductive tasks like excavation, food processing, and juvenile care, relying heavily on their mandibles. Given the importance of biting for ant workers and the significant mandible morphological diversity across species, it is essential to understand how mandible shape influences its mechanical responses to bite loading. We employed Finite Element Analysis to simulate biting scenarios on mandible volumetric models from 25 ant species classified in different feeding habits. We hypothesize that mandibles of predatory ants, especially trap-jaw ants, would perform better than mandibles of omnivorous species due to their necessity to subdue living prey. We defined simulations to allow only variation in mandible morphology between specimens. Our results demonstrated interspecific differences in mandible mechanical responses to biting loading. However, we found no evident differences in biting performance between the predatory and the remaining ants, and trap-jaw mandibles did not show lower stress levels than other mandibles under bite loading. These results suggest that ant feeding habit is not a robust predictor of mandible biting performance, a possible consequence of mandibles being employed as versatile tools to perform several tasks.

Bridging two insect flight modes in evolution, physiology and robophysics

Since taking flight, insects have undergone repeated evolutionary transitions between two seemingly distinct flight modes1-3. Some insects neurally activate their muscles synchronously with each wingstroke. However, many insects have achieved wingbeat frequencies beyond the speed limit of typical neuromuscular systems by evolving flight muscles that are asynchronous with neural activation and activate in response to mechanical stretch2-8. These modes reflect the two fundamental ways of generating rhythmic movement: time-periodic forcing versus emergent oscillations from self-excitation8-10. How repeated evolutionary transitions have occurred and what governs the switching between these distinct modes remain unknown. Here we find that, despite widespread asynchronous actuation in insects across the phylogeny3,6, asynchrony probably evolved only once at the order level, with many reversions to the ancestral, synchronous mode. A synchronous moth species, evolved from an asynchronous ancestor, still preserves the stretch-activated muscle physiology. Numerical and robophysical analyses of a unified biophysical framework reveal that rather than a dichotomy, these two modes are two regimes of the same dynamics. Insects can transition between flight modes across a bridge in physiological parameter space. Finally, we integrate these two actuation modes into an insect-scale robot11-13 that enables transitions between modes and unlocks a new self-excited wingstroke strategy for engineered flight. Together, this framework accounts for repeated transitions in insect flight evolution and shows how flight modes can flip with changes in physiological parameters.

The effects of temperature on elastic energy storage and release in a system with a dynamic mechanical advantage latch

Changes in temperature alter muscle kinetics and in turn affect whole-organism performance. Some organisms use the elastic recoil of biological springs, structures which are far less temperature sensitive, to power thermally robust movements. For jumping frogs, the use of elastic energy in tendons is facilitated through a geometric latching mechanism that operates through dynamic changes in the mechanical advantage (MA) of the hindlimb. Despite the well-documented use of elastic energy storage, frog jumping is a locomotor behavior that is significantly affected by changes in temperature. Here, we used an in vitro muscle preparation interacting in real time with an in silico model of a legged jumper to understand how changes in temperature affect the flow of energy in a system using a MA latch. We used the plantaris longus muscle-tendon unit (MTU) to power a virtual limb with changing MA and a mass being accelerated through a real-time feedback controller. We quantified the amount of energy stored in and recovered from elastic structures and the additional contribution of direct muscle work after unlatching. We found that temperature altered the duration of the energy loading and recovery phase of the in vitro/in silico experiments. We found that the early phase of loading was insensitive to changes in temperature. However, an increase in temperature did increase the rate of force development, which in turn allowed for increased energy storage in the second phase of loading. We also found that the contribution of direct muscle work after unlatching was substantial and increased significantly with temperature. Our results show that the thermal robustness achieved by an elastic mechanism depends strongly on the nature of the latch that mediates energy flow, and that the relative contribution of elastic and direct muscle energy likely shapes the thermal sensitivity of locomotor systems.

Controlling jumps through latches in small jumping robots

Small jumping robots can use springs to maximize jump performance, but they are typically not able to control the height of each jump owing to design constraints. This study explores the use of the jumper's latch, the component that mediates the release of energy stored in the spring, as a tool for controlling jumps. A reduced-order model that considers the dynamics of the actuator pulling the latch and the effect of spring force on the latch is presented. This model is then validated using high speed video and ground reaction force measurements from a 4gjumper. Both the model and experimental results demonstrate that jump performance in small insect-inspired resource-constrained robots can be tuned to a range of outputs using latch mediation, despite starting with a fixed spring potential energy. For a fixed set of input voltages to the latch actuator, the results also show that a jumper with a larger latch radius has greater tunability. However, this greater tunability comes with a trade-off in maximum performance. Finally, we define a new metric, 'Tunability Range,' to capture the range of controllable jump behaviors that a jumper with a fixed spring compression can attain given a set of control inputs (i.e. latch actuation voltage) to choose from.

Development of an impulsive motion generator inspired by cocking slip joint of snapping shrimp

We propose an impulsive motion generator inspired by snapping shrimp. The proposed device mimics the geometrical arrangement of a unique claw joint calledcocking slip jointand integrates it with an artificial rack-pinion actuator mechanism rather than adopting the musculoskeletal system as it is. The design approach allows the proposed device to reproduce the impulsive slip motion through the torque reversal and unlatching mechanism of the underlying unique joint by using a single servo motor. Static and dynamic analyses revealed that the actuator force required to store and release elastic energy was remarkably small compared with the resulting acceleration force and rotation/tip speed. Through simulations and experiments, we validated the mechanical analyses and confirmed that the resulting ultrafast slip motion was comparable with the claw closure of snapping shrimp based on the cocking slip joint. Moreover, from an engineering perspective, the motion profiles are modifiable through design parameters, and the repeatability of the impulsive slip motion is satisfactory.

A novel electric stimulus-responsive micro-actuator for powerful biomimetic motions

Limited by the surface-to-volume ratio of structural materials, it is a great challenge to achieve high output performance in a millimetre-sized actuator. Traditional rigid actuators can achieve higher vibration frequencies above the centimetre size, but their working performance will be greatly reduced below the millimetre size, and even cannot maintain the vibration. A micro-actuator is highly essential for the miniaturisation of bionic robots. In this work, we present a novel driving principle by utilising the plasmonic thermal energy generated by electric stimulation to drive the vibration of the micro-actuator. In the design, the micro-actuator is composed of two chambers and elastic elements, which is similar to the design of a micro-piston. By utilising the thermal energy of the plasma, the actuator can generate high-frequency vibration (resonant frequency of 140 Hz), and the simple structural design can achieve a large vibration amplitude on a millimetre scale. Based on this powerful actuator, several applications are presented, such as fast crawling and jumping. The good performance of the electric stimulus-responsive micro-actuator suggests promising applications ranging from millimetre-scale robots in confined spaces to detection, search and rescue.

Elastic pinch biomechanisms can yield consistent launch speeds regardless of projectile mass

Energetic trade-offs are particularly pertinent to bio-ballistic systems which impart energy to projectiles exclusively during launch. We investigated such trade-offs in the spring-propelled seeds of Loropetalum chinense, Hamamelis virginiana and Fortunearia sinensis. Using similar seed-shooting mechanisms, fruits of these confamilial plants (Hamamelidaceae) span an order of magnitude in spring and seed mass. We expected that as seed mass increases, launch speed decreases. Instead, launch speed was relatively constant regardless of seed mass. We tested if fruits shoot larger seeds by storing more elastic potential energy (PE). Spring mass and PE increased as seed mass increased (in order of increasing seed mass: L. chinense, H. virginiana, F. sinensis). As seed mass to spring mass ratio increased (ratios: H. virginiana = 0.50, F. sinensis = 0.65, L. chinense = 0.84), mass-specific PE storage increased. The conversion efficiency of PE to seed kinetic energy (KE) decreased with increasing fruit mass. Therefore, similar launch speeds across scales occurred because (i) larger fruits stored more PE and (ii) smaller fruits had higher mass-specific PE storage and improved PE to KE conversion. By examining integrated spring and projectile mechanics in our focal species, we revealed diverse, energetic scaling strategies relevant to spring-propelled systems navigating energetic trade-offs.

Investigation of the rate-mediated form-function relationship in biological puncture

Puncture is a vital mechanism for survival in a wide range of organisms across phyla, serving biological functions such as prey capture, defense, and reproduction. Understanding how the shape of the puncture tool affects its functional performance is crucial to uncovering the mechanics underlying the diversity and evolution of puncture-based systems. However, such form-function relationships are often complicated by the dynamic nature of living systems. Puncture systems in particular operate over a wide range of speeds to penetrate biological tissues. Current studies on puncture biomechanics lack systematic characterization of the complex, rate-mediated, interaction between tool and material across this dynamic range. To fill this knowledge gap, we establish a highly controlled experimental framework for dynamic puncture to investigate the relationship between the puncture performance (characterized by the depth of puncture) and the tool sharpness (characterized by the cusp angle) across a wide range of bio-relevant puncture speeds (from quasi-static to [Formula: see text] 50 m/s). Our results show that the sensitivity of puncture performance to variations in tool sharpness reduces at higher puncture speeds. This trend is likely due to rate-based viscoelastic and inertial effects arising from how materials respond to dynamic loads. The rate-dependent form-function relationship has important biological implications: While passive/low-speed puncture organisms likely rely heavily on sharp puncture tools to successfully penetrate and maintain functionalities, higher-speed puncture systems may allow for greater variability in puncture tool shape due to the relatively geometric-insensitive puncture performance, allowing for higher adaptability during the evolutionary process to other mechanical factors.

Cell Lineage-Guided Microanalytical Mass Spectrometry Reveals Increased Energy Metabolism and Reactive Oxygen Species in the Vertebrate Organizer

Molecular understanding of the vertebrate Organizer, a tissue center critical for inductive signaling during gastrulation, has so far been limited to transcripts and some proteins due to limitations in detection and sensitivity. The Spemann-Mangold Organizer (SMO) in the South African Clawed Frog ( X. laevis ), a popular model of development, has long been discovered to induce the patterning of the central nervous system. Molecular screens on the tissue have identified several genes, such as goosecoid, chordin, and noggin, with independent ability to establish a body axis. A comprehensive study of proteins and metabolites produced in the SMO and their functional roles has been lacking. Here, we pioneer a deep discovery proteomic and targeted metabolomic screen of the SMO in comparison to the rest of the embryo using liquid chromatography high-resolution mass spectrometry (HRMS). Quantification of ∼4,600 proteins and a panel of metabolites documented differential expression for ∼450 proteins and multiple intermediates of energy metabolism in the SMO. Upregulation of oxidative phosphorylation (OXPHOS) and redox regulatory proteins gave rise to elevated oxidative stress and an accumulation of reactive oxygen species in the Organizer. Imaging experiments corroborated these findings, discovering enrichment of hydrogen peroxide in the SMO tissue. Chemical perturbation of the redox gradient affected mesoderm involution during early tissue movements of gastrulation. HRMS expands the bioanalytical toolbox of cell and developmental biology, providing previously unavailable information on molecular classes to challenge and refine our classical understanding of the Organizer and its function during early patterning of the embryo.

Voluntary muscle coactivation in quiet standing elicits reciprocal rather than coactive agonist-antagonist control of reactive balance

Muscle coactivation increases in challenging balance conditions as well as with advanced age and mobility impairments. Increased muscle coactivation can occur both in anticipation of (feedforward) and in reaction to (feedback) perturbations, however, the causal relationship between feedforward and feedback muscle coactivation remains elusive. Here, we hypothesized that feedforward muscle coactivation would increase both the body's initial mechanical resistance due to muscle intrinsic properties and the later feedback-mediated muscle coactivation in response to postural perturbations. Young adults voluntarily increased leg muscle coactivation using visual biofeedback before support-surface perturbations. In contrast to our hypothesis, feedforward muscle coactivation did not increase the body's initial intrinsic resistance to perturbations, nor did it increase feedback muscle coactivation. Rather, perturbations with feedforward muscle coactivation elicited a medium- to long-latency increase of feedback-mediated agonist activity but a decrease of feedback-mediated antagonist activity. This reciprocal rather than coactivation effect on ankle agonist and antagonist muscles enabled faster reactive ankle torque generation, reduced ankle dorsiflexion, and reduced center of mass (CoM) motion. We conclude that in young adults, voluntary feedforward muscle coactivation can be independently modulated with respect to feedback-mediated muscle coactivation. Furthermore, our findings suggest feedforward muscle coactivation may be useful for enabling quicker joint torque generation through reciprocal, rather than coactivated, agonist-antagonist feedback muscle activity. As such our results suggest that behavioral context is critical to whether muscle coactivation functions to increase agility versus stability.NEW & NOTEWORTHY Feedforward and feedback muscle coactivation are commonly observed in older and mobility impaired adults and are considered strategies to improve stability by increasing body stiffness prior to and in response to perturbations. In young adults, voluntary feedforward coactivation does not necessarily increase feedback coactivation in response to perturbations. Instead, feedforward coactivation enabled faster ankle torques through reciprocal agonist-antagonist muscle activity. As such, coactivation may promote either agility or stability depending on the behavioral context.

Striatal dopamine regulates sleep states and narcolepsy-cataplexy

Disruptions to sleep can be debilitating and have a severe effect on daily life. Patients with the sleep disorder narcolepsy suffer from excessive daytime sleepiness, disrupted nighttime sleep, and cataplexy - the abrupt loss of postural muscle tone (atonia) during wakefulness, often triggered by strong emotion. The dopamine (DA) system is implicated in both sleep-wake states and cataplexy, but little is known about the function of DA release in the striatum - a major output region of midbrain DA neurons - and sleep disorders. To better characterize the function and pattern of DA release in sleepiness and cataplexy, we combined optogenetics, fiber photometry, and sleep recordings in a murine model of narcolepsy (orexin-/-; OX KO) and in wildtype mice. Recording DA release in the ventral striatum revealed OX-independent changes across sleep-wake states as well as striking increases in DA release in the ventral, but not dorsal, striatum prior to cataplexy onset. Tonic low frequency stimulation of ventral tegmental efferents in the ventral striatum suppressed both cataplexy and REM sleep, while phasic high frequency stimulation increased cataplexy propensity and decreased the latency to rapid eye movement (REM) sleep. Together, our findings demonstrate a functional role of DA release in the striatum in regulating cataplexy and REM sleep.

Autonomous, untethered gait-like synchronization of lobed loops made from liquid crystal elastomer fibers via spontaneous snap-through

The transition from one equilibrium state to another via rapid snap-through can store elastic energy and release it as kinetic energy for rapid motion as seen in Venus flytrap and hummingbird to catch insects mid-flight. They are explored in soft robotics for repeated and autonomous motions. In this study, we synthesize curved liquid crystal elastomer (LCE) fibers as the building blocks that can undergo buckling instability upon heated on a hot surface, leading to autonomous snap-through and rolling behaviors. When they are connected into lobed loops, where each fiber is geometrically constrained by the neighboring ones, they demonstrate autonomous, self-regulated, and repeated synchronization with a frequency of ~1.8 Hz. By adding a rigid bead on the fiber, we can fine-tune the actuation direction and speed (up to ~2.4 mm/s). Last, we demonstrate various gait-like locomotion patterns using the loops as the robot's legs.

On latches in biological systems: a comparative morphological and functional study of the retinaculum and the dens lock in Collembola

BACKGROUND

Springtails have the ability to jump using morphological structures consisting of a catapult, the furca, and a latching system constructed with interaction of the retinaculum and the dens lock. The retinaculum engages in the furca at the dens lock in order to form a spring mechanism. They exhibit diversified morphological traits that serve as adaptations to a variety of terrestrial strata and aquatic surface environments. This comparative morphofunctional study centered on the retinaculum and the furcular region of the dens lock aims to describe the morphological variation between taxa and provide insights into the functional dynamics of the latching mechanism at work in the jumping apparatus. Using SEM, µCT and cLSM, we compared representatives of Collembola taxa, Poduromorpha (Neanura muscorum and Podura aquatica), Symphypleona (Dicyrtomina ornata) and Neelipleona (Megalothorax minimus), and examined extracts of the environment in which they were collected.

RESULTS

A retinaculum is absent in N. muscorum, although vestigial muscles were found. Abdominal musculature varies significantly, being more abundant in springtails with clear segmentation (N. muscorum and P. aquatica), and reduced in springtails with fused segmentation (D. ornata and M. minimus). The M.a-ret varies as regards architecture and point of connection with the ramus, which is lateral in P. aquatica and median in the other species studied. The number of teeth in the retinaculum ramus also varies between three in M. minimus and four in the other species. The dens lock of all species studied has two locks and two furrows.

CONCLUSIONS

The retinaculum and dens lock interact in a key-lock relationship. The latching and unlatching mechanism from the retinaculum and dens lock appear to be similar in all the taxa examined, occurring by muscle force. This leads us to question the hypothesis that hemolymph pressure may be a force generator in jumping. We offer a reconstruction of the ground pattern of the retinaculum and dens lock and, in addition, an explanation of their functioning and the interaction between them. Finally, we frame the interaction between the retinaculum and the dens lock as a latch in a biological system, a mechanism which functions by force of physical contact.

Muscle-tendon unit design and tuning for power enhancement, power attenuation, and reduction of metabolic cost

The contractile elements in skeletal muscle fibers operate in series with elastic elements, tendons and potentially aponeuroses, in muscle-tendon units (MTUs). Elastic strain energy (ESE), arising from either work done by muscle fibers or the energy of the body, can be stored in these series elastic elements (SEEs). MTUs vary considerably in their design in terms of the relative lengths and stiffnesses of the muscle fibers and SEEs, and the force and work generating capacities of the muscle fibers. However, within an MTU it is thought that contractile and series elastic elements can be matched or tuned to maximize ESE storage. The use of ESE is thought to improve locomotor performance by enhancing contractile element power during activities such as jumping, attenuating contractile element power during activities such as landing, and reducing the metabolic cost of movement during steady-state activities such as walking and running. The effectiveness of MTUs in these potential roles is contingent on factors such as the source of mechanical energy, the control of the flow of energy, and characteristics of SEE recoil. Hence, we suggest that MTUs specialized for ESE storage may vary considerably in the structural, mechanical, and physiological properties of their components depending on their functional role and required versatility.

Structural damping renders the hawkmoth exoskeleton mechanically insensitive to non-sinusoidal deformations

Muscles act through elastic and dissipative elements to mediate movement, which can introduce dissipation and filtering which are important for energetics and control. The high power requirements of flapping flight can be reduced by an insect's exoskeleton, which acts as a spring with frequency-independent material properties under purely sinusoidal deformation. However, this purely sinusoidal dynamic regime does not encompass the asymmetric wing strokes of many insects or non-periodic deformations induced by external perturbations. As such, it remains unknown whether a frequency-independent model applies broadly and what implications it has for control. We used a vibration testing system to measure the mechanical properties of isolated Manduca sexta thoraces under symmetric, asymmetric and band-limited white noise deformations. The asymmetric and white noise conditions represent two types of generalized, multi-frequency deformations that may be encountered during steady-state and perturbed flight. Power savings and dissipation were indistinguishable between symmetric and asymmetric conditions, demonstrating that no additional energy is required to deform the thorax non-sinusoidally. Under white noise conditions, stiffness and damping were invariant with frequency, suggesting that the thorax has no frequency-dependent filtering properties. A simple flat frequency response function fits our measured frequency response. This work demonstrates the potential of materials with frequency-independent damping to simplify motor control by eliminating any velocity-dependent filtering that viscoelastic elements usually impose between muscle and wing.

A power amplification dyad in seahorses

Throughout evolution, organisms repeatedly developed elastic elements to power explosive body motions, overcoming ubiquitous limits on the power capacity of fast-contracting muscles. Seahorses evolved such a latch-mediated spring-actuated (LaMSA) mechanism; however, it is unclear how this mechanism powers the two complementary functions necessary for feeding: rapidly swinging the head towards the prey, and sucking water into the mouth to entrain it. Here, we combine flow visualization and hydrodynamic modelling to estimate the net power required for accelerating the suction feeding flows in 13 fish species. We show that the mass-specific power of suction feeding in seahorses is approximately three times higher than the maximum recorded from any vertebrate muscle, resulting in suction flows that are approximately eight times faster than similar-sized fishes. Using material testing, we reveal that the rapid contraction of the sternohyoideus tendons can release approximately 72% of the power needed to accelerate the water into the mouth. We conclude that the LaMSA system in seahorses is powered by two elastic elements, the sternohyoideus and epaxial tendons. These elements jointly actuate the coordinated acceleration of the head and the fluid in front of the mouth. These findings extend the known function, capacity and design of LaMSA systems.

Scale dependence in hydrodynamic regime for jumping on water

Momentum transfer from the water surface is strongly related to the dynamical scale and morphology of jumping animals. Here, we investigate the scale-dependent momentum transfer of various jumping organisms and engineered systems at an air-water interface. A simplified analytical model for calculating the maximum momentum transfer identifies an intermediate dynamical scale region highly disadvantageous for jumping on water. The Weber number of the systems should be designed far from 1 to achieve high jumping performance on water. We design a relatively large water-jumping robot in the drag-dominant scale range, having a high Weber number, for maximum jumping height and distance. The jumping robot, around 10 times larger than water striders, has a take-off speed of 3.6 m/s facilitated by drag-based propulsion, which is the highest value reported thus far. The scale-dependent hydrodynamics of water jumpers provides a useful framework for understanding nature and robotic system interacting with the water surface.

Control of high-speed jumps: the rotation and energetics of the locust (Schistocerca gregaria)

Locusts (Schistocerca gregaria) jump using a latch mediated spring actuated system in the femur-tibia joint of their metathoracic legs. These jumps are exceptionally fast and display angular rotation immediately after take-off. In this study, we focus on the angular velocity, at take-off, of locusts ranging between 0.049 and 1.50 g to determine if and how rotation-rate scales with size. From 263 jumps recorded from 44 individuals, we found that angular velocity scales with mass^-0.33, consistent with a hypothesis of locusts having a constant rotational kinetic energy density. Within the data from each locust, angular velocity increased proportionally with linear velocity, suggesting the two cannot be independently controlled and thus a fixed energy budget is formed at take-off. On average, the energy budget of a jump is distributed 98.7% to translational kinetic energy and gravitational potential energy, and 1.3% to rotational kinetic energy. The percentage of energy devoted to rotation was constant across all sizes of locusts and represents a very small proportion of the energy budget. This analysis suggests that smaller locusts find it harder to jump without body rotation.

Adapting small jumping robots to compliant environments

Jumping animals launch themselves from surfaces that vary widely in compliance from grasses and shrubs to tree branches. However, studies of robotic jumpers have been largely limited to those jumping from rigid substrates. In this paper, we leverage recent work describing how latches in jumping systems can mediate the transition from stored potential energy to kinetic energy. By including a description of the latch in our system model of both the jumper and compliant substrate, we can describe conditions in which a jumper can either lose energy to the substrate or recover energy from the substrate resulting in an improved jump performance. Using our mathematical model, we illustrate how the latch plays a role in the ability of a system to adapt its jump performance to a wide range of substrates that vary in their compliance. Our modelling results are validated using a 4 g jumper with a range of latch designs jumping from substrates with varying mass and compliance. Finally, we demonstrate the jumper recovering energy from a tree branch during take-off, extending these mechanistic findings to robots interacting with a more natural environment.

Droplet superpropulsion in an energetically constrained insect

Food consumption and waste elimination are vital functions for living systems. Although how feeding impacts animal form and function has been studied for more than a century since Darwin, how its obligate partner, excretion, controls and constrains animal behavior, size, and energetics remains largely unexplored. Here we study millimeter-scale sharpshooter insects (Cicadellidae) that feed exclusively on a plant's xylem sap, a nutrient-deficit source (95% water). To eliminate their high-volume excreta, these insects exploit droplet superpropulsion, a phenomenon in which an elastic projectile can achieve higher velocity than the underlying actuator through temporal tuning. We combine coupled-oscillator models, computational fluid dynamics, and biophysical experiments to show that these insects temporally tune the frequency of their anal stylus to the Rayleigh frequency of their surface tension-dominated elastic drops as a single-shot resonance mechanism. Our model predicts that for these tiny insects, the superpropulsion of droplets is energetically cheaper than forming jets, enabling them to survive on an extreme energy-constrained xylem-sap diet. The principles and limits of superpropulsion outlined here can inform designs of energy-efficient self-cleaning structures and soft engines to generate ballistic motions.

Developing elastic mechanisms: ultrafast motion and cavitation emerge at the millimeter scale in juvenile snapping shrimp

Organisms such as jumping froghopper insects and punching mantis shrimp use spring-based propulsion to achieve fast motion. Studies of elastic mechanisms have primarily focused on fully developed and functional mechanisms in adult organisms. However, the ontogeny and development of these mechanisms can provide important insights into the lower size limits of spring-based propulsion, the ecological or behavioral relevance of ultrafast movement, and the scaling of ultrafast movement. Here, we examined the development of the spring-latch mechanism in the bigclaw snapping shrimp, Alpheus heterochaelis (Alpheidae). Adult snapping shrimp use an enlarged claw to produce high-speed strikes that generate cavitation bubbles. However, until now, it was unclear when the elastic mechanism emerges during development and whether juvenile snapping shrimp can generate cavitation at this size. We reared A. heterochaelis from eggs, through their larval and postlarval stages. Starting 1 month after hatching, the snapping shrimp snapping claw gradually developed a spring-actuated mechanism and began snapping. We used high-speed videography (300,000 frames s-1) to measure juvenile snaps. We discovered that juvenile snapping shrimp generate the highest recorded accelerations (5.8×105±3.3×105 m s-2) for repeated-use, underwater motion and are capable of producing cavitation at the millimeter scale. The angular velocity of snaps did not change as juveniles grew; however, juvenile snapping shrimp with larger claws produced faster linear speeds and generated larger, longer-lasting cavitation bubbles. These findings establish the development of the elastic mechanism and cavitation in snapping shrimp and provide insights into early life-history transitions in spring-actuated mechanisms.

Blood python (Python brongersmai) strike kinematics and forces are robust to variations in substrate geometry

Snake strikes are some of the most rapid accelerations in terrestrial vertebrates. Generating rapid body accelerations requires high ground reaction forces, but on flat surfaces snakes must rely on static friction to prevent slip. We hypothesize that snakes may be able to take advantage of structures in the environment to prevent their body from slipping, potentially allowing them to generate faster and more forceful strikes. To test this hypothesis, we captured high-speed video and forces from defensive strikes of juvenile blood pythons (Python brongersmai) on a platform that was either open on all sides or with two adjacent walls opposite the direction of the strike. Contrary to our predictions, snakes maintained high performance on open platforms by imparting rearward momentum to the posterior body and tail. This compensatory behavior increases robustness to changes in their strike conditions and could allow them to exploit variable environments.

Geometric latches enable tuning of ultrafast, spring-propelled movements

The smallest, fastest, repeated-use movements are propelled by power-dense elastic mechanisms, yet the key to their energetic control may be found in the latch-like mechanisms that mediate transformation from elastic potential energy to kinetic energy. Here, we tested how geometric latches enable consistent or variable outputs in ultrafast, spring-propelled systems. We constructed a reduced-order mathematical model of a spring-propelled system that uses a torque reversal (over-center) geometric latch. The model was parameterized to match the scales and mechanisms of ultrafast systems, specifically snapping shrimp. We simulated geometric and energetic configurations that enabled or reduced variation of strike durations and dactyl rotations given variation of stored elastic energy and latch mediation. Then, we collected an experimental dataset of the energy storage mechanism and ultrafast snaps of live snapping shrimp (Alpheus heterochaelis) and compared our simulations with their configuration. We discovered that snapping shrimp deform the propodus exoskeleton prior to the strike, which may contribute to elastic energy storage. Regardless of the amount of variation in spring loading duration, strike durations were far less variable than spring loading durations. When we simulated this species' morphological configuration in our mathematical model, we found that the low variability of strike duration is consistent with their torque reversal geometry. Even so, our simulations indicate that torque reversal systems can achieve either variable or invariant outputs through small adjustments to geometry. Our combined experiments and mathematical simulations reveal the capacity of geometric latches to enable, reduce or enhance variation of ultrafast movements in biological and synthetic systems.

Spring and latch dynamics can act as control pathways in ultrafast systems

Ultrafast movements propelled by springs and released by latches are thought limited to energetic adjustments prior to movement, and seemingly cannot adjust once movement begins. Even so, across the tree of life, ultrafast organisms navigate dynamic environments and generate a range of movements, suggesting unrecognized capabilities for control. We develop a framework of control pathways leveraging the non-linear dynamics of spring-propelled, latch-released systems. We analytically model spring dynamics and develop reduced-parameter models of latch dynamics to quantify how they can be tuned internally or through changing external environments. Using Lagrangian mechanics, we test feedforward and feedback control implementation via spring and latch dynamics. We establish through empirically-informed modeling that ultrafast movement can be controllably varied during latch release and spring propulsion. A deeper understanding of the interconnection between multiple control pathways, and the tunability of each control pathway, in ultrafast biomechanical systems presented here has the potential to expand the capabilities of synthetic ultra-fast systems and provides a new framework to understand the behaviors of fast organisms subject to perturbations and environmental non-idealities.

Jumping mechanism in the marsh beetles (Coleoptera: Scirtidae)

The jumping mechanism with supporting morphology and kinematics is described in the marsh beetle Scirtes hemisphaericus (Coleoptera: Scirtidae). In marsh beetles, the jump is performed by the hind legs by the rapid extension of the hind tibia. The kinematic parameters of the jump are: 139–1536 m s⁻² (acceleration), 0.4–1.9 m s⁻¹ (velocity), 2.7–8.4 ms (time to take-off), 0.2–5.4 × 10^–6 J (kinetic energy) and 14–156 (g-force). The power output of a jumping leg during the jumping movement is 3.5 × 10³ to 9.6 × 10³ W kg⁻¹. A resilin-bearing elastic extensor ligament is considered to be the structure that accumulates the elastic strain energy. The functional model of the jumping involving an active latching mechanism is proposed. The latching mechanism is represented by the conical projection of the tibial flexor sclerite inserted into the corresponding socket of the tibial base. Unlocking is triggered by the contraction of flexor muscle pulling the tibial flexor sclerite backwards which in turn comes out of the socket. According to the kinematic parameters, the time of full extension of the hind tibia, and the value of the jumping leg power output, this jumping mechanism is supposed to be latch-mediated spring actuation using the contribution of elastically stored strain energy.

Engineered living bioassemblies for biomedical and functional material applications

Recent breakthroughs in biofabrication of bioasemblies, consisting of the engineered structures composed of biological or biosynthetic components into a single construct, have found a wide range of practical applications in medicine and engineering. This review presents an overview of how the bottom-up assembly of living entities could drive advances in medicine, by developing tunable biological models and more precise methods for quantifying biological events. Moreover, we delve into advances beyond biomedical applications, where bioassemblies can be manipulated as functional robots and construction materials. Finally, we address the potential challenges and opportunities in the field of engineering living bioassemblies, toward building new design principles for the next generation of bioengineering applications.

A Tunable, Simplified Model for Biological Latch Mediated Spring Actuated Systems

We develop a model of latch-mediated spring actuated (LaMSA) systems relevant to comparative biomechanics and bioinspired design. The model contains five components: two motors (muscles), a spring, a latch, and a load mass. One motor loads the spring to store elastic energy and the second motor subsequently removes the latch, which releases the spring and causes movement of the load mass. We develop freely available software to accompany the model, which provides an extensible framework for simulating LaMSA systems. Output from the simulation includes information from the loading and release phases of motion, which can be used to calculate kinematic performance metrics that are important for biomechanical function. In parallel, we simulate a comparable, directly actuated system that uses the same motor and mass combinations as the LaMSA simulations. By rapidly iterating through biologically relevant input parameters to the model, simulated kinematic performance differences between LaMSA and directly actuated systems can be used to explore the evolutionary dynamics of biological LaMSA systems and uncover design principles for bioinspired LaMSA systems. As proof of principle of this concept, we compare a LaMSA simulation to a directly actuated simulation that includes either a Hill-type force-velocity trade-off or muscle activation dynamics, or both. For the biologically-relevant range of parameters explored, we find that the muscle force-velocity trade-off and muscle activation have similar effects on directly actuated performance. Including both of these dynamic muscle properties increases the accelerated mass range where a LaMSA system outperforms a directly actuated one.

On springtails (Hexapoda: Collembola): a morphofunctional study of the jumping apparatus

Background

Springtails (Hexapoda: Collembola) are tiny organisms that lead a hidden life, mostly occuring deep in the soil and on leaf litter. They have a variety of interesting body morphology patterns, the most famous of which is the catapult-like structure that enables them to jump and flee from predators. This highly specialized jumping apparatus consists of a mobile furca, which when at rest fits into a trigger, "the retinaculum" on the ventral side of the abdomen. Despite the many studies that have attempted to investigate the jumping apparatus, the actual mechanisms involved in the jump, for example the way in which the furca is released by the retinaculum, how and where the mechanisms of spring and hydrostatic pressure originate, are still not properly understood. The morphology of the jumping apparatus of Orchesella cincta was investigated in detail using confocal laser scanning microscopy and MicroCT techniques for 3D reconstruction.

Results

The morphology of O. cincta with both flexed and extended furca is analysed and described. The abdominal musculature involved in the jumping mechanism and relevant structures of the exoskeleton of retinaculum and furca are described in detail. With the data obtained in this study, hypotheses can be made about (1) where and how the spring and hydrostatic pressure mechanisms originate; (2) which muscles act on the extension and flexion of the furca; (3) which muscles act on the retinaculum and (4) how the retinaculum is released from the furca.

Conclusions

The comparative morphological study proved informative, and shows how springtail jumping involves mechanisms unique to this taxon. Hydrostatic pressure regulation possibly varies between animals with distinct segmentation, and those with fused segmentation. Interesting cuticular characters were revealed, such as basal plates and sclerites related to the construction of the spring mechanism. The present study establishes itself as a model option for future morphofunctional studies on springtail’s jumping. Analysis of videos and images using a high speed camera will be useful for understanding how the jump develops through take-off, aerial and landing phases.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12983-022-00463-y.

Theory of Fast Walking With Human-Driven Load-Carrying Robot Exoskeletons

Reaching and maintaining high walking speeds is challenging for a human when carrying extra weight, such as walking with a heavy backpack. Robotic limbs can support a heavy backpack when standing still, but accelerating a backpack within a couple of steps to race-walking speeds requires limb force and energy beyond natural human ability. Here, we conceive a human-driven robot exoskeleton that could accelerate a heavy backpack faster and maintain top speeds higher than what the human alone can when not carrying a backpack. The key components of the exoskeleton are the mechanically adaptive but energetically passive spring limbs. We show that by optimally adapting the stiffness of the limbs, the robot can achieve near-horizontal center of mass motion to emulate the load-bearing mechanics of the bicycle. We find that such an exoskeleton could enable the human to accelerate one extra body weight up to top race-walking speeds in ten steps. Our finding predicts that human-driven mechanically adaptive robot exoskeletons could extend human weight-bearing and fast-walking ability without using external energy.

Dual spring force couples yield multifunctionality and ultrafast, precision rotation in tiny biomechanical systems

Small organisms use propulsive springs rather than muscles to repeatedly actuate high acceleration movements, even when constrained to tiny displacements and limited by inertial forces. Through integration of a large kinematic dataset, measurements of elastic recoil, energetic math modeling and dynamic math modeling, we tested how trap-jaw ants (Odontomachus brunneus) utilize multiple elastic structures to develop ultrafast and precise mandible rotations at small scales. We found that O. brunneus develops torque on each mandible using an intriguing configuration of two springs: their elastic head capsule recoils to push and the recoiling muscle-apodeme unit tugs on each mandible. Mandibles achieved precise, planar, circular trajectories up to 49,100 rad s-1 (470,000 rpm) when powered by spring propulsion. Once spring propulsion ended, the mandibles moved with unconstrained and oscillatory rotation. We term this mechanism a 'dual spring force couple', meaning that two springs deliver energy at two locations to develop torque. Dynamic modeling revealed that dual spring force couples reduce the need for joint constraints and thereby reduce dissipative joint losses, which is essential to the repeated use of ultrafast, small systems. Dual spring force couples enable multifunctionality: trap-jaw ants use the same mechanical system to produce ultrafast, planar strikes driven by propulsive springs and for generating slow, multi-degrees of freedom mandible manipulations using muscles, rather than springs, to directly actuate the movement. Dual spring force couples are found in other systems and are likely widespread in biology. These principles can be incorporated into microrobotics to improve multifunctionality, precision and longevity of ultrafast systems.

Muscle fatigue in the latch-mediated spring actuated mandibles of trap-jaw ants

Muscle fatigue can reduce performance potentially affecting an organism's fitness. However, some aspects of fatigue could be overcome by employing a latch-mediated spring actuated system (LaMSA) where muscle activity is decoupled from movement. We estimated the effects of muscle fatigue on different aspects of mandible performance in six species of ants, two whose mandibles are directly actuated by muscles and four that have LaMSA "trap-jaw" mandibles. We found evidence that the LaMSA system of trap-jaw ants may prevent some aspects of performance from declining with repeated use, including duration, acceleration and peak velocity. However, inter-strike interval increased with repeated strikes suggesting that muscle fatigue still comes into play during the spring loading phase. In contrast, one species with directly actuated mandibles showed a decline in bite force over time. These results have implications for design principles aimed at minimizing the effects of fatigue on performance in spring and motor actuated systems.

Mathematical model and nanoindentation properties of the claws of Cyrtotrachelus buqueti Guer (Coleoptera: Curculionidae)

Scanning electron microscopy (SEM) was used to observe the macroscopic, microscopic, and cross‐sectional structures of the claws of Cyrtotrachelus buqueti Guer (Coleoptera: Curculionidae), and a mathematical model of a claw was used to investigate the structure–function relationships. To improve the quality of the SEM images, a non‐local means (NLM) algorithm and an improved NLM algorithm were applied. After comparison and analysis of five classical edge‐detection algorithms, the boundaries of the structural features of the claw were extracted based on a B‐spline wavelet algorithm, and the results showed that the variable curvature of the beetle claw enhances its adhesion force and improves its strength. Adhesion models of the claw were established, and the mechanical properties of its biomaterials were measured using nanoindentation. Considering that the presence of water can affect the hardness and Young's modulus, both ‘dry’ and ‘wet’ samples were examined. For the dry samples, the hardness and Young's modulus were 0.197 ± 0.074 GPa and 1.105 ± 0.197 GPa, respectively, whereas the respective values for the wet samples were both lower at 0.071 ± 0.030 GPa and 0.693 ± 0.163 GPa. This study provides data that can inform the design of climbing robots.

The effect of thermally robust ballistic mechanisms on climatic niche in salamanders

Many organismal functions are temperature-dependent due to the contractile properties of muscle. Spring-based mechanisms offer a thermally robust alternative to temperature-sensitive muscular movements and may correspondingly expand a species’ climatic niche by partially decoupling the relationship between temperature and performance. Using the ballistic tongues of salamanders as a case study, we explore whether the thermal robustness of elastic feeding mechanisms increases climatic niche breadth, expands geographic range size, and alters the dynamics of niche evolution. Combining phylogenetic comparative methods with global climate data, we find that the feeding mechanism imparts no discernable signal on either climatic niche properties or the evolutionary dynamics of most climatic niche parameters. Although biomechanical innovation in feeding influences many features of whole-organism performance, it does not appear to drive macro-climatic niche evolution in salamanders. We recommend that future work incorporate micro-scale environmental data to better capture the conditions that salamanders experience, and we discuss a few outstanding questions in this regard. Overall, this study lays the groundwork for an investigation into the evolutionary relationships between climatic niche and biomechanical traits in ectotherms.