Redox Studies of the Scandium Metallocene (C5H2tBu3)2ScII Lead to a Terminal Side-On (N═N)2- Complex: [(C5H2tBu3)2ScIII(η2-N2)]. J Am Chem Soc 2025;147:12138-12149. [PMID: 40162988 DOI: 10.1021/jacs.5c00607] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Cyclic voltammetry measurements on the scandium(II) metallocene, Cpttt2ScII (Cpttt = C5H2tBu3), reveal a -1.87 V vs Fc+/Fc event assigned to the [Cpttt2Sc]+/0 redox couple and a -3.09 V process assigned to the [Cpttt2Sc]0/- redox couple, which are consistent with subsequent chemical studies. Chemical oxidation of Cpttt2ScII with AgBPh4 gives the scandocenium cation salt [Cpttt2ScIII][BPh4], 1. The [Cpttt2ScIII]+ cation does not coordinate the [BPh4]- anion or THF solvent; however, one of the methyl groups of a tert-butyl substituent has a close interaction with the Sc(III) ion. Decomposition occurs in the presence of a [nBu4N][PF6] supporting electrolyte, and chemical studies indicate that 1 reacts with the [PF6]- anion by fluoride abstraction to form Cpttt2ScIIIF and PF5. Chemical reduction of 1 to Cpttt2ScII proceeds with Cp*2SmII and Cp*2CoII (Cp* = C5Me5), which is consistent with the measured reduction potentials. Cpttt2ScII was not observed to react with N2; however, the treatment of Cpttt2ScII with KC8 and 18-crown-6 (crown) under N2 forms the (N═N)2- complex, Cpttt2ScIII(μ-η2:η2-N2)K(crown), 2. The reaction of Cpttt2ScII with KC8 in the presence of 2.2.2-cryptand (crypt) generates [K(crypt)][Cpttt2ScIII(η2-N2)], 3, which is the first isolable complex of any metal with a terminal side-on (N═N)2- ligand. These LnIIA2/M/N2 reactions (M = alkali metal; (A)- = anion) are the Ln(II)/Ln(I) analogs of the previously reported Ln(III)/Ln(II) reactions, LnIIIA3/M/N2, in which reduction of Ln(III) complexes generates Ln(II) reactivity to form (N═N)2- complexes.

Room-Temperature H2 Splitting and N2-Hydrogenation Induced by a Neutral LuII Complex

The direct splitting of H2 and N2 molecules is a challenging reaction that is closely related to the Haber-Bosch ammonia synthesis process. Until now, such reactivity has never been observed in the case of molecular lanthanide species. Here, we show that careful selection of the ligand scaffold allows the isolation and characterization of a kinetically stable but highly reactive LuII complex. This divalent lanthanide species enables direct H2 splitting at room temperature, an unknown reactivity in lanthanide chemistry, which has been fully corroborated by DFT calculations. In addition, the LuII complex readily binds N2, leading to an end-on coordinated diazenido (N2)2- lanthanide complex. The latter can be hydrogenated under very smooth conditions (ca. 1.2 bar H2, ambient temperature) to form a unique LuIII-NH2 complex. Direct N2 hydrogenation and cleavage are thus accessible using low-valent molecular rare-earth metal complexes.

Reactions of R3PNNPR3 Species with Boranes: Classical Adducts, FLPs, and Radical Cations

Although the nature of bis-phosphazine species is of much interest, there are few reports of their reactivity. Herein, we show that the bis-phosphazine species Ph3PNNPPh3 1 react with Lewis acids to give the Lewis acid adducts Ph3PNN(B(C6F5)3)PPh3 3 and Ph3PN(BF3)N(BF3)PPh3 4. Compound 1 also generates a frustrated Lewis pair (FLP) in the presence of BPh3 and thermolysis of 1/BPh3, or 3 at 80 °C released N2 while 4 was stable at 80 °C. In contrast, the species Cy3PNNPCy3 2 reacted with B(C6F5)3 to effect single electron transfer affording a frustrated radical pair (FRP). Independent reactions of 1 and 2 with [Cp2Fe][BF4] gave the corresponding radical salts [R3PNNPR3]•+[BF4] (R = Cy 5b Ph 6). Structural and computational data show the N─N bond is strengthened in the bis-phosphazine radical cation.

Heavier alkaline earth and heterobimetallic s-block "ate" complexes of a di(amido)siloxane ligand: solid-state structure and dynamic solution-phase behaviour

The diverse solid-state structures and solution-phase dynamics of both neutral and heterometallic s-block "ate" complexes of the heavier alkaline earth metals (Ae; Ca-Ba) supported by a chelating and flexible di(amido)siloxane ligand ([NON-DippL]2- = [O(SiMe2NDipp)2]2-) are described, enabling comparison with those of closely related di(amido) ligands based on either flexible aliphatic or rigid xanthene-based backbones. Three dimeric alkaline earth complexes [(NON-DippL)Ae]2 (Ae = Ca (2), Sr (3) and Ba (4)) which feature a κ3-N,O,N'-κ1-N'-tridentate coordination mode were prepared from protonolysis reactions between NON-DippLH2 with (Ae = Ca, Sr and Ba); N'' = [N(SiMe3)2]-. In tetrahydrofuran, these complexes were readily converted into the monomeric adducts [(NON-DippL)Ae(thf)n] (n = 2, Ae = Ca (5); n = 3, Ae = Sr (6) and Ba (7)). Heterometallic Ae/K amide "ate" complexes were afforded through two routes: reaction of previously reported [(NON-DippL)Mg]2 (1) with two equivalents of KN'' at elevated temperatures resulted in [(NNO-DippL)Mg(μ-N'')K]n (8; NNO-DippL = [OSiMe2NDippSiMe2NDipp]2-), whereas the equimolar reaction of NON-DippLH2 with led to [(NON-DippL)Ae(μ-N'')K]n (Ae = Ca (9), Sr (10) and Ba (11)). Complexes 8-11 exist as one-dimensional coordination polymers propagated by K+-aryl π-facial interactions in the solid-state. The mixed amide/siloxide "NNO" ligand in 8 results from a 1,3-silyl retro-Brook rearrangement of the original di(amido)siloxane ligand, while the larger Ae2+ congeners readily accommodate the coordination of KN'' with the di(amido)siloxane ligand retaining a κ3-N,O,N'-tridentate motif in 9-11. Finally, the solution-phase behaviour of 8-11 in both toluene and thf were investigated indicating the reversible dissociation of KN'' from 9-11 and the thermodynamic parameters of this process were elucidated.

Synthesis and Stabilization of a Benzene Dianion with a Triplet Ground State and Baird Aromaticity

The triplet benzene dianion is predicted to be aromatic based on Baird's rule. However, it has remained elusive due to the Jahn-Teller distortion. Herein, we report isolation of a benzene dianion with a triplet ground state in an inverse-sandwich europium benzene complex. Combined experimental and theoretical studies unveil that the strong antiferromagnetic coupling between the benzene dianion and 4f7 Eu2+ ions is pivotal to the stabilization of the triplet state of the benzene dianion with Baird aromaticity. In addition, a comparison with analogous ytterbium benzene and europium para-xylene complexes further reveals that the spin state of the benzene dianion depends on the spin-spin interaction and local symmetry. These results accomplish the isolation of the long-sought triplet benzene dianion and illustrate the effectiveness of spin modulation using lanthanide ions.

Predicting Dinitrogen Activation by Boron Radical Cations

Activation of dinitrogen (N2) under mild conditions has been a particularly challenging project for decades, owing to the highly strong N≡N triple bond. In recent years, the main group species have emerged as a prominent strategy in the field of dinitrogen activation, but the reported examples remain particularly rare compared with transition metal complexes. Herein, we performed a comprehensive density functional theory (DFT) calculation of N2 activation by boron radical cations. The calculations demonstrated that N2 activation by boron radical cations was favorable both kinetically and thermodynamically, with high exothermicity (ΔG value of -36.8 kcal/mol) and a low reaction barrier (7.3 kcal/mol), indicating feasibility under mild conditions. Moreover, principal interacting spin orbitals (PISOs) and intrinsic bond orbitals (IBOs) analyses revealed that the boron radical cation activated N2 through two perpendicular interactions, including σ-type donation and π-type backdonation. Additionally, further analysis implied that π-type backdonation is essential for N2 activation. Our findings offer an alternative approach for metal-free N2 activation, highlighting the significance of boron chemistry in N2 activation.

Facile, Reversible Hydrogen Activation by Low-Coordinate Magnesium Oxide Complexes

New approaches to achieve facile and reversible dihydrogen activation are of importance for synthesis, catalysis, and hydrogen storage. Here we show that low-coordinate magnesium oxide complexes [{(RDipnacnac)Mg}2(μ-O)] 1, with RDipnacnac = HC(RCNDip)2, Dip = 2,6-iPr2C6H3, R = Me (1a), Et (1b), iPr (1c), readily react with dihydrogen under mild conditions to afford mixed hydride-hydroxide complexes [{(RDipnacnac)Mg}2(μ-H)(μ-OH)] 4. Dehydrogenation of complexes 4 is strongly dependent on remote ligand substitution and can be achieved by simple vacuum-degassing of 4c (R = iPr) to regain 1c. Donor addition to complexes 4 also releases hydrogen and affords donor adducts of magnesium oxide complexes. Computational studies suggest that the hydrogen activation mechanism involves nucleophilic attack of an oxide lone pair at a weakly bound H2···Mg complex in an SN2-like manner that induces a heterolytic dihydrogen cleavage to yield an MgOH and an MgH unit. Alternative synthetic routes into complex 4b from a magnesium hydride complex have been investigated and the ability of complexes 1 or 4 to act as catalysts for the hydrogenation of 1,1-diphenylethene (DPE) has been tested.

A Rare Case of Magnesium Alkyl Mediated CO-to-Alkoxide Conversion

Alcohols can be produced by nucleophilic addition at the C=O functional group of ketones or aldehydes. Such C-C bond formations generally proceed smoothly and selective. In contrast, nucleophilic addition at carbon monoxide is considerably more complex and unselective due to the instability of polar metal acyl intermediates. Herein, we report a magnesium alkyl complex, stabilised with a dipyrromethenide ligand, and its reactivity with CO2 and CO. Whilst the reaction with CO2 gave the expected carboxylate, reaction with CO took a surprising course, resulting in an alkoxide by formation of three new C-C bonds in a single reaction. An intertwined experimental and computational approach sheds light on the unusual reactivity of a carbene intermediate.

Tuning the selectivity of P4 reduction at alkaline-earth metal centres

Reduction of P4 with β-diketiminate MgI complexes, (BDI)MgMg(BDI), depends strongly on the bulk of the ligand. Whereas superbulky BDI ligands gave selective reduction to P4 2- in a butterfly conformation, reduction with a less bulky ligand gave various products among which P8 4- had a realgar-type structure. The selectivity of P4 reduction can also be controlled by metal choice. Reduction of P4 with CaI synthons of general type (BDI*)Ca-X-Ca(BDI*) in which BDI* is a superbulky ligand and X is a bridging dianion (C6H6 2- < p-xylene2- < N2 2-) led to reduction of P4 to the very common, stable Zintl anion P7 3-. Monitoring this process with 31P NMR shows that cyclo-P4 2- is an intermediate en route to P7 3-. Conversion rates increase with increasing reducing power: X = C6H6 2- < p-xylene2- < N2 2-. A complex with the weakly reducing DBA2- dianion led to selective P4 reduction to cyclo-P4 2- (DBA = 9,10-dimethyl-diboraanthracene). DBA inhibits P4-to-P7 conversion, most likely by capturing the electron needed for further P4 reduction by radical processes. Experimental investigations are supported by crystal structure determinations and a computational DFT study which also shows that the nature of metal-P4 bonding (covalent or ionic) determines the preference for formation of butterfly-shaped P4 2- or planar 6π-electron aromatic cyclo-P4 2-.

Stabilization of the Compressed Planar Benzene Dianion in Inverse-Sandwich Rare Earth Metal Complexes

For the first time, the capture of the planar antiaromatic parent benzene dianion in between two trivalent rare earth (RE) metal cations (REIII), each stabilized by two guanidinate ligands, is reported. The synthesized inverse-sandwich complexes [{(Me3Si)2NC(NiPr)2}2RE]2(μ-η6 : η6-C6H6), (RE=Y (1), Dy (2), and Er (3)) were crystallized from aprotic solvents and feature a remarkably planar parent benzene dianion, previously not encountered for any metal ion prone to low or absent covalency. The -2 charge localization at the benzene ligand was deduced from the results obtained by single-crystal X-ray diffraction analyses, spectroscopy, magnetometry, and Density Functional Theory (DFT) calculations. In the 1H NMR spectrum of the diamagnetic Y complex 1, the equivalent proton resonance of the bridging benzene dianion ligand is drastically shifted to higher field in comparison to free benzene. This and the calculated highly positive Nucleus-Independent Chemical Shift (NICS) values are attributed to the antiaromatic character of the benzene dianion ligand. The crucial role of the ancillary guanidinate ligand scaffold in stabilizing the planar benzene dianion conformation was also elucidated by DFT calculations. Remarkably, the planarity of the benzene dianion originates from the stabilization of the π-type orbitals of the d-manifold and compression through its strong electrostatic interaction with the two REIII sites.

Series expansion of a scalable Hermitian excitonic renormalization method

Utilizing the sparsity of the electronic structure problem, fragmentation methods have been researched for decades with great success, pushing the limits of ab initio quantum chemistry ever further. Recently, this set of methods has been expanded to include a fundamentally different approach called excitonic renormalization, providing promising initial results. It builds a supersystem Hamiltonian in a second-quantized-like representation from transition-density tensors of isolated fragments, contracted with biorthogonalized molecular integrals. This makes the method fully modular in terms of the quantum chemical methods applied to each fragment and enables massive truncation of the state-space required. Proof-of-principle tests have previously shown that an excitonically renormalized Hamiltonian can efficiently scale to hundreds of fragments, but the ad hoc approach to building the Hamiltonian was not scalable to larger fragments. On the other hand, initial tests of the originally proposed modular Hamiltonian build, presented here, show the accuracy to be poor on account of its non-Hermitian character. In this study, we bridge the gap between these with an operator expansion that is shown to converge rapidly, tending toward a Hermitian Hamiltonian while retaining the modularity, yielding an accurate, scalable method. The accuracy is tested here for a beryllium dimer. At distances near equilibrium and longer, the zeroth-order method is comparable to coupled-cluster singles, doubles, and perturbative triples and the first-order method is comparable to full configuration interaction (FCI). The second-order method agrees with FCI for distances well up the inner repulsive wall of the potential. Deviations occurring at shorter bond distances are discussed along with approaches to scaling to larger fragments.

Analogy of C-Pt and C-O Chemical Bonding in the Diatomic CPt and CO

The conjugate-pair molecules of CO and CPt provide a prototype of the autogenic isolobal relationship between the O and Pt atoms that can rationalize the structure and reactivity trends of platinum carbides. Herein, the photoelectron detachment at 532 nm has been recorded for the gas-phase CPt- by using the photoelectron velocity-map imaging spectroscopy. The vibrationally resolved ground-state transition reveals a wealth of information concerning the electronic ground states of CPt0/-1. Although the triple bonding characters in both CPt and CO have fortified the autogenic isolobal relationship between O and Pt, further detailed bonding comparisons have revealed the subtle nuance in the triple bonding. The triple bonds of CO comprise one σ donor bond from the O atom to the C atom and two degenerate π electron-sharing bonds. In contrast, the triple bonds of CPt involve three dative bonds, including one σ donor bond from the C atom to the Pt atom and two degenerate π back-donation bonds from the Pt atom to the C atom.

Beyond the triple bond: unlocking dinitrogen activation with tailored superbase phosphines

Activating atmospheric dinitrogen (N2), a molecule with a remarkably strong triple bond, remains a major challenge in chemistry. This theoretical study explores the potential of superbase phosphines, specifically those decorated with imidazolin-2-imine ((ImN)3P) and imidazolin-2-methylidene ((ImCH)3P) to facilitate N2 activation and subsequent hydrazine (H2NNH2) formation. Using density functional theory (DFT) at the M06L/6-311++G(d,p) level, we investigated the interactions between these phosphines and N2. Mono-phosphine-N2 complexes exhibit weak, noncovalent interactions (-0.6 to -7.1 kcal mol-1). Notably, two superbasic phosphines also form high-energy hypervalent complexes with N2, albeit at significantly higher energies. The superbasic nature and potential for the hypervalency of these phosphines lead to substantial N2 activation in bis-phosphine-N2 complexes, where N2 is "sandwiched" between two phosphine moieties through hypervalent P-N bonds. Among the phosphines studied, only (ImN)3P forms an exothermic sandwich complex with N2, stabilized by hydrogen bonding between the ImN substituents and the central N2 molecule. A two-step, exothermic hydrogen transfer pathway from (ImN)3P to N2 results in the formation of a bis-phosphine-diimine (HNNH) sandwich complex. Subsequent hydrogen transfer leads to the formation of a bis-phosphine-hydrazine (H2NNH2) complex, a process that, although endothermic, exhibits surmountable activation barriers. The relatively low energy requirements for this overall transformation suggest its potential feasibility under the optimized conditions. This theoretical exploration highlights the promise of superbase phosphines as a strategy for metal-free N2 activation, opening doors for the development of more efficient and sustainable nitrogen fixation and utilization methods.

Mechanochemical Synthesis, Characterization and Reactivity of a Room Temperature Stable Calcium Electride

A new calcium-based Room temperature Stable Electride (RoSE), K[{Ca[N(Mes)(SiMe3)]3(e-)}2K3] (2), is successfully synthesized from the reaction of a calcium tris-amide, [Ca{N(Mes)(SiMe3)}3K] (1) (Mes = 2,4,6-trimethylphenyl), with potassium under mechanochemical treatment. The dimeric structure of K[{Ca[N(Mes)(SiMe3)]3(e-)}2K3] is calculated using ab initio random structure searching (AIRSS) methods. This shows the existence of highly localized anionic electrons (e-) and suggests poor electrical conductance, as confirmed via electroconductivity measurements. The two anionic electrons in 2 are strongly antiferromagnetically coupled, thus in agreement with the largely diamagnetic response from magnetometry. Reaction of 2 with pyridine affords 4,4'-bipyridine, while reaction with benzene gives C-H activation and formation of a calcium hydride complex, [K(η6-C6H6)4][{Ca[N(Mes)(SiMe3)](H)}2K3] (3). Computational DFT analysis reveals the crucial role played by the ligand framework in the stabilization of this new Ca-hydride complex.

Deciphering the Nitrogen Activation Mechanisms on Group VIII Single Atoms at MoS2

The activation of nitrogen (N2) is vital for sustainable ammonia production and nitrogen fixation technologies. This study employs density functional theory (DFT) to investigate the nitrogen activation and reduction capabilities of Group VIII single-atom catalysts anchored on MoS2. Among these, osmium anchored on MoS2 (Os@MoS2) emerged as the most promising catalyst, exhibiting the highest N2 activation and the lowest nitrogen reduction reaction (NRR) overpotential (0.624 V). A pronounced "electron drift" effect was observed for Os@MoS2, leading to significant charge redistribution that weakens the N ≡ N triple bond, facilitating its activation. The N-N dissociation energy barrier at the *N-NH2 intermediate was calculated to be only 0.82 eV, confirming Os@MoS2's superior catalytic efficiency. Detailed analyses, including electrostatic potential maps, electron localization functions, spin density, and charge transfer, revealed the pivotal role of orbital interactions in driving N2 activation. Interestingly, the trends in adsorbed N2 bond energies and NRR overpotentials showed a consistent diagonal pattern across the Group VIII catalysts, emphasizing the importance of electronic and geometric factors. This work offers valuable insights into nitrogen activation mechanisms and provides a framework for designing efficient catalysts, highlighting Os@MoS2's potential in sustainable ammonia synthesis.

Chemical Bonding in [Fe(η4-P4)2]2- and Related Complexes

Quantum chemical calculations of the six valence isoelectronic complexes [FeL2]2-, [CoL2]-, and NiL2 with L = η4-P4, η4-C4H4 using density functional theory have been carried out. The molecular structures were investigated with a variety of methods. The analysis of the electronic structure in [Fe(η4-P4)2]2- shows that the bonding situation is very similar to valence isoelectronic Ni(η4-C4H4)2. The orbital interactions in the 18 electron complexes [TML2]q (TMq = Fe2-, Co-, Ni) come mainly from TM(dπ)→L2 backdonation, enhanced by smaller contributions from TM(dδ)→L2 backdonation and TM(s)←L2 donation. Calculations of the six TML2 species indicate that all of them are viable candidates for synthetic work. The bonding situation is very similar and can straightforwardly be explained with the Dewar-Chatt-Duncanson bonding model in terms of dative bonding between d10 metal atoms and the ligands in the electronic singlet state. EDA-NOCV calculations using the ligands and the metal atoms with different charges and electronic states indicate that the metal-ligand bonds in the charged complexes [FeL2]2- and [CoL2]- are best described with fragments in the electronic triplet state between the metal atoms with d8 configuration and triplet ligands. The singlet fragments give the degenerate TM(dπ)→L2 π backdonation as the strongest component, whereas the triplet fragments have the related electron-sharing TMq (dπ)-(L2)2- π bonding as the major component, differing only by the assignment of the bonded two electrons to one or both fragments. The calculations of the charge distribution using the Hirshfeld and Voronoi partitioning methods suggest that the metal atoms are nearly neutral or carry small negative charges in all complexes. The NBO method gives erratic charges, because of the neglect of the 4p AOs of the transition metals as genuine valence orbitals.

Multinuclear beryllium amide and imide complexes: structure, properties and bonding

The beryllium amide and imide complexes [Be(HNMes)2]3, [(py)2Be(HNMes)2], [Be(HNDipp)2]2, [Be(NPh2)(μ2-HNDipp)]2 and [Be(NCPh2)2]3 have been prepared and characterised with NMR and IR spectroscopy as well as single crystal X-ray diffraction. Analysis of the localised molecular orbitals (LMOs) and intrinsic atomic orbital (IAO) atomic charges in the framework of the intrinsic bond orbital (IBO) localization method revealed a covalent bonding network consisting of 2-electron-2-centre and 2-electron-3-centre σ bonds, in which one electron pair of the anionic N-donor ligands is involved. The electron deficiency at the beryllium atoms is partially compensated through additional electron donation from the lone pair at the nitrogen atoms.

Formation, Structure and Reactivity of a Beryllium(0) Complex with Mgδ+-Beδ- Bond Polarization

Attempts to create a novel Mg-Be bond by reaction of [(DIPePBDI*)MgNa]2 with Be[N(SiMe3)2]2 failed; DIPePBDI*=HC[(tBu)C=N(DIPeP)]2, DIPeP=2,6-Et2C-phenyl. Even at elevated temperatures, no conversion was observed. This is likely caused by strong steric shielding of the Be center. A similar reaction with the more open Cp*BeCl gave in quantitative yield (DIPePBDI*)MgBeCp* (1). The crystal structure shows a Mg-Be bond of 2.469(4) Å. Homolytic cleavage of the Mg-Be bond requires ΔH=69.6 kcal mol-1 (cf. CpBe-BeCp 69.0 kcal mol-1 and (DIPPBDI)Mg-Mg(DIPPBDI) 55.8 kcal mol-1). Natural-Population-Analysis (NPA) shows fragment charges: (DIPePBDI*)Mg +0.27/BeCp* -0.27. The very low NPA charge on Be (+0.62) compared to Mg (+1.21) and the strongly upfield 9Be NMR signal at -23.7 ppm are in line with considerable electron density on Be and the formal oxidation state assignment of MgII-Be0. Despite this Mgδ+-Beδ- polarity, 1 is extremely thermally stable and unreactive towards H2, CO, N2, cyclohexene and carbodiimide. It reacted with benzophenone, azobenzene, phenyl acetylene, CO2 and CS2. Reaction with 1-adamantyl azide led to reductive coupling and formation of an N6-chain. The azide reagent also inserted in the Cp*-Be bond. The inertness of 1 is likely due to bulky ligands protecting the Mg-Be unit.

Predicting Activation of Small Molecules Including Dinitrogen via a Carbene with a σ0π2 Electronic Configuration

Although the main group species in the s and p blocks have begun to gain prominence in the field of dinitrogen (N2) activation in recent years, reports of carbene-mediated N2 activation remain particularly rare, especially for carbenes with a σ0π2 electronic configuration. Herein, we demonstrate examples of N2 activation initiated by a carbene with a σ0π2 electronic configuration and consequent N2 hydroboration reaction (with a reaction barrier as low as 19.9 kcal/mol) via density functional theory calculations. Meanwhile, the "push-pull" electronic effect upon introduction of a hydroborenium complex facilitates the generation of a thermodynamically and kinetically more stable product. In addition, such a σ0π2 carbene can also activate a series of H-X (X = H, CH3, or Bpin) bonds through an oxidative addition process with activation energies ranging from 6.0 to 18.0 kcal/mol. Our findings highlight the importance of σ0π2 carbenes in the field of small molecule activation, especially N2 activation.

Predicting Small Molecule Activations Including Dinitrogen Based on an Inorganic Benzene B4N2 Framework

Although main group species have emerged in the field of dinitrogen activation in recent years, the reported examples are particularly rare in comparison with transition metal complexes due to their significant challenges. Herein, we demonstrate a [4 + 2] cycloaddition reaction of N2 (with an activation energy as low as 12.5 kcal mol-1) initiated by an inorganic benzene via density functional theory calculations. Such N2 activation is supported by the elongated nitrogen-nitrogen bond distance (dNN), decreased vibration frequency (νNN), and weakened Wiberg bond index (WBINN). Subsequently, the "push-pull" electronic effect, formed by introducing a Lewis acid, HB(C6F5)2, facilitates the generation of thermodynamically more stable products. In addition, this inorganic benzene could also be used to activate a series of small molecules, including carbon dioxide, acetylene, ethylene, and acetonitrile with reaction barriers ranging from 4.7 to 11.6 kcal mol-1. Our findings provide an alternative approach to N2 activation and functionalization, theoretically validating the feasibility of the dual Lewis acid strategy for dinitrogen activation.

Synthesis and Characterization of Bulky 1,3-Diamidopropane Complexes of Group 2 Metals (Be-Sr)

Reaction of lithium 1,3-diamidopropane Li2(TripNCN) (TripNCN=[{(Trip)NCH2}2CH2]2-, Trip=2,4,6-triisopropylphenyl) with BeBr2(OEt2)2 gave the diamido beryllium complex, [(TripNCN)Be(OEt2)]. Deprotonation reactions between the bulkier 1,3-diaminopropane (TCHPNCN)H2 (TCHPNCN=[{(TCHP)NCH2}2CH2]2-, TCHP=2,4,6-tricyclohexylphenyl) and magnesium alkyls afforded the adduct complexes [(TCHPNCN)Mg(OEt2)] and [(TCHPNCN)Mg(THF)2], depending on the reaction conditions employed. Treating [(TCHPNCN)Mg(THF)2] with the N-heterocyclic carbene :C{(MeNCMe)2} (TMC) gave [(TCHPNCN)Mg(TMC)2] via substitution of the THF ligands. Reactions of (ArNCN)H2 (Ar=Trip or TCHP) with Mg{CH2(SiMe3)}2, in the absence of Lewis bases, yielded the N-bridged dimers [{(ArNCN)Mg}2]. Salt metathesis reactions between alkali metal salts M2(TCHPNCN) (M=Li or K) and CaI2 or SrI2 led to the THF adduct compounds [(TCHPNCN)Ca(THF)3] and [(TCHPNCN)Sr(THF)4], the differing number of THF ligands in which is a result of the different sizes of the metals involved. The described complexes hold potential as precursors to kinetically protected, low oxidation state group 2 metal species.

Fresh Impetus in the Chemistry of Calcium Peroxides

Redox-inactive metal ions are essential in modulating the reactivity of various oxygen-containing metal complexes and metalloenzymes, including photosystem II (PSII). The heart of this unique membrane-protein complex comprises the Mn4CaO5 cluster, in which the Ca2+ ion acts as a critical cofactor in the splitting of water in PSII. However, there is still a lack of studies involving Ca-based reactive oxygen species (ROS) systems, and the exact nature of the interaction between the Ca2+ center and ROS in PSII still generates intense debate. Here, harnessing a novel Ca-TEMPO complex supported by the β-diketiminate ligand to control the activation of O2, we report the isolation and structural characterization of hitherto elusive Ca peroxides, a homometallic Ca hydroperoxide and a heterometallic Ca/K peroxide. Our studies indicate that the presence of K+ cations is a key factor controlling the outcome of the oxygenation reaction of the model Ca-TEMPO complex. Combining experimental observations with computational investigations, we also propose a mechanistic rationalization for the reaction outcomes. The designed approach demonstrates metal-TEMPO complexes as a versatile platform for O2 activation and advances the understanding of Ca/ROS systems.

Monomethylation and -protonation of Lutetium Dinitrogen Complex

Due to the highly chemically inert nature, direct activation and transformation of dinitrogen are challenging. Here, we disclose the synthesis, isolation, and derivatization of (N2)3- supported by lutetium complex. Initially, a (N2)3- radical, in [{(C5Me5){MeC(NiPr)2}Lu}2(μ2-η2:η2-N2)][K(crypt)] (crypt = 2,2,2-cryptand) complex, was generated through the reduction of neutral lutetium dinitrogen complex [{(C5Me5){MeC(NiPr)2}Lu}2(μ2-η2:η2-N2)] with potassium metal. Subsequently, the reaction of (N2)3- complex with methyl triflate (or triflic acid) led to the formation of an N-C (or N-H) bond, yielding the corresponding [{(C5Me5){MeC(NiPr)2}Lu}2(NN-R)(OTf)][K(crypt)] (R = Me, H, OTf = CF3SO3) as the product. Both electron paramagnetic resonance spectroscopy and density functional theory analyses support the radical character of the NN-Me unit. The Lu-N bonds in the (NN-Me)•2- radical complex are predominantly ionic, with 77% of the unpaired electron localized on the (NN-Me) fragment. Moreover, the geometry of the pure organic radical (NN-Me)•2-, optimized by double-hybrid density functional theory, closely matches that of the (NN-Me)•2- lutetium complex.

Similarities and Differences in Benzene Reduction with Ca, Sr, Yb and Sm: Strong Evidence for Tetra-Anionic Benzene

Inverse sandwich complexes of Yb and Sm stabilized by a bulky β-diketiminate (BDI) ligand have been prepared: (BDI)Ln(η6,η6-C6H6)Ln(BDI); Ln=lanthanide. Coordinated benzene ligands can be neutral, di-anionic or, often controversially discussed, even tetra-anionic. The formal charge on benzene is correlated to assignment of the metal oxidation state which generally poses a problem. Herein, we take advantage of the structural similarities found when comparing CaII with YbII, and SrII with SmII complexes. In this work, we found an excellent overlap of the Ca/Yb inverse sandwich structures but a striking difference for the Sr/Sm pair. The much shorter Sm-N and Sm-C6H6 distances are strong evidence for a SmIII-benzene-4-SmIII assignment. This was further supported by NMR spectroscopy, magnetic susceptibility, reactivity and comprehensive computational investigation.

Multiple Bonding in AeN- (Ae=Ca, Sr, Ba)

Quantum chemical calculations using ab initio methods at the MRCI+Q(8,9)/def2-QZVPPD and CCSD(T)/def2-QZVPPD levels as well as using density functional theory are reported for the diatomic molecules AeN- (Ae=Ca, Sr, Ba). The anions CaN- and SrN- have electronic triplet (3Π) ground states with nearly identical bond dissociation energies De ~57 kcal/mol calculated at the MRCI+Q(8,9)/def2-QZVPPD level. In contrast, the heavier homologue BaN- has a singlet (1Σ+) ground state, which is only 1.1 kcal/mol below the triplet (3Σ-) state. The computed bond dissociation energy of (1Σ+) BaN- is 68.4 kcal/mol. The calculations at the CCSD(T)-full/def2-QZVPPD and BP86-D3(BJ)/def2-QZVPPD levels are in reasonable agreement with the MRCI+Q(8,9)/def2-QZVPPD data, except for the singlet (1Σ+) state, which has a large multireference character. The calculated atomic partial charges given by the CM5, Voronoi and Hirshfeld methods suggest small to medium-sized Ae←N- charge donation for most electronic states. In contrast, the NBO method predicts for all species medium to large Ae→N- electronic charge donation, which is due to the neglect of the (n)p AOs of Ae atoms as genuine valence orbitals. Neither the bond orders nor the bond lengths correlate with the bond dissociation energies. The EDA-NOCV calculations show that the heavier alkaline earth atoms Ca, Sr, Ba use their (n)s and (n-1)d orbitals for covalent bonding.

Reductions of Arenes using a Magnesium-Dinitrogen Complex

In this contribution, we present "Birch-type", and other reductions of simple arenes by the potassium salt of an anionic magnesium dinitrogen complex, [{K(TCHPNON)Mg}2(μ-N2)] (TCHPNON=4,5-bis(2,4,6-tricyclohexylanilido)-2,7-diethyl-9,9-dimethyl-xanthene), which acts as a masked dimagnesium(I) diradical in these reactions. This reagent is non-hazardous, easy-to-handle, and in some cases provides access to 1,4-cyclohexadiene reduction products under relatively mild reaction conditions. This system works effectively to reduce benzene, naphthalene and anthracene through magnesium-bound "Birch-type" reduction intermediates. Cyclohexadiene products can be subsequently released from the magnesium centres by protonolysis with methanol. In contrast, the reduction of substituted arenes is less selective and involves competing reaction pathways. For toluene and 1,3,5-triphenylbenzene, the structural authentication of "Birch-type" reduction intermediates is conclusive, although the formation of corresponding 1,4-cyclohexadiene derivatives was low yielding. Reduction of anisole did not yield an isolable "Birch-type" intermediate, but instead gave a C-O activation product. Treating triphenylphosphine with [{K(TCHPNON)Mg}2(μ-N2)] resulted in the extrusion of both biphenyl and dinitrogen to afford a magnesium(II) phosphanide [{K(TCHPNON)Mg(μ-PPh2)}2]. Reduction of fluorobenzene proceeded via C-F activation of the arene, and isolation of the magnesium(II) fluoride [{K(TCHPNON)Mg(μ-F)}2]. Finally, the two-electron reduction of 1,3,5,7-cyclooctatetraene (COT) with [{K(TCHPNON)Mg}2(μ-N2)] yielded a complex, [{K(TCHPNON)Mg}2(μ-COT)], incorporating the aromatic dianion (COT2-).

Dinitrogen Activation within Frustrated Lewis Pairs Is Promoted by Adding External Electric Fields

This study uses computational means to explore the feasibility of N2 cleavage by frustrated Lewis pair (FLPs) species. The employed FLP systems are phosphane/borane (1) and carbene/borane (2). Previous studies show that 1 and 2 react with H2 and CO2 but do not activate N2. The present study demonstrates that N2 is indeed inert, and its activation requires augmentation of the FLPs by an external tool. As we demonstrate here, FLP-mediated N2 activation can be achieved by an external electric field oriented along the reaction axis of the FLP. Additionally, the study demonstrates that FLP -N2 activation generates useful nitrogen compound, e.g., hydrazine (H2N-NH2). In summary, we conclude that FLP effectively activates N2 in tandem with oriented external electric fields (OEEFs), which play a crucial role. This FLP/OEEF combination may serve as a general activator of inert molecules.

Neutral inverse-sandwich rare-earth metal complexes of the benzene tetraanion

Rare-earth metal complexes of the parent benzene tetraanion and neutral inverse-sandwich rare-earth metal arene complexes have remained elusive. Here, we report the first neutral inverse-sandwich rare-earth metal complexes of the parent benzene tetraanion supported by a monoanionic β-diketiminate (BDI) ligand. Reduction of the trivalent rare-earth metal diiodide precursors (BDI)MI2(THF) (BDI = HC(C(Me)N[C6H3-(3-pentyl)2-2,6])2; M = Y, 1-Y; M = Sm, 1-Sm) in benzene or para-xylene by potassium graphite yielded the neutral inverse-sandwich rare-earth metal arene complexes [(BDI)M(THF) n ]2(μ-η6,η6-arene) (M = Y, Sm; arene = benzene, 2-M; arene = para-xylene, 3-M). Single crystal X-ray diffraction, spectroscopic and magnetic characterization studies, together with density functional theory (DFT) calculations confirm that these neutral rare-earth metal arene complexes possess an [M3+-(arene)4--M3+] electronic structure with strong metal-arene δ interactions. The arene exchange reactivity shows that 2-Sm has higher stability than 3-Sm. Furthermore, 2-Sm can behave as a four-electron reductant to reduce unsaturated organic substrates. Particularly, while the reaction of 2-Sm with 1,3,5,7-cyclooctatetraene (COT) yielded (BDI)Sm(η8-COT) (4-Sm), 2-Sm reacted with 1,4-diphenylbutadiyne to afford (BDI)Sm(η4-C4Ph2) (5-Sm), the first rare-earth metallacyclopentatriene complex.

Contrasting a series of bidentate amido phosphine oxide, sulfide, or selenide ligands and complexes of dimethyl aluminum and indium

A series of EP(V)-imine phosphine-imine ligands (Dipp-NC(CH3)-(CH2)-PE(Ph2)) (Dipp = 2,6-diisopropylphenyl, E = O, S, Se) and corresponding dimethyl aluminum and indium complexes were prepared and characterized using multi-nuclear NMR spectroscopy and SC-XRD. Solution-state 1H and 31P NMR spectroscopy indicate a mixture of isomers in solution (C6D6, CDCl3, and CD3CN). Solid state structures of both the imine and (E)-enamine isomers of the oxygen-based ligand have been observed. These three ligands (L) were then deprotonated with M(CH3)3 (M = Al or In), with methane loss forming a 6-membered ring via bidentate chelation ((κ2-L)M(CH3)2). The indium/oxide complex also crystallized as a 12-membered ring.

Low oxidation state and hydrido group 2 complexes: synthesis and applications in the activation of gaseous substrates

Numerous industrial processes utilise gaseous chemical feedstocks to produce useful chemical products. Atmospheric and other small molecule gases, including anthropogenic waste products (e.g. carbon dioxide), can be viewed as sustainable building blocks to access value-added chemical commodities and materials. While transition metal complexes have been well documented in the reduction and transformation of these substrates, molecular complexes of the terrestrially abundant alkaline earth metals have also demonstrated promise with remarkable reactivity reported towards an array of industrially relevant gases over the past two decades. This review covers low oxidation state and hydrido group 2 complexes and their role in the reduction and transformation of a selection of important gaseous substrates towards value-added chemical products.

Synthesis and Reactivity of Discrete Europium(II) Hydride Complexes

The bulky β-diketiminate ligand frameworks [BDIDCHP]- and [BDIDipp/Ar]- (BDI=[HC{C(Me)2N-Dipp/Ar}2]- (Dipp=2,6-diisopropylphenyl (Dipp); Ar=2,6-dicyclohexylphyenyl (DCHP) or 2,4,6-tricyclohexylphyenyl (TCHP)) have been developed for the kinetic stabilisation of the first europium (II) hydride complexes, [(BDIDCHP)Eu(μ-H)]2, [(BDIDipp/DCHP)Eu(μ-H)]2 and [(BDIDipp/TCHP)Eu(μ-H)]2, respectively. These complexes represent the first step beyond the current lanthanide(II) hydrides that are all based on ytterbium. Tuning the steric profile of β-diketiminate ligands from a symmetrical to unsymmetrical disposition, enhanced solubility and stability in the solution-state. This provides the first opportunity to study the structure and bonding of these novel Eu(II) hydride complexes crystallographically, spectroscopically and computationally, with their preliminary reactivity investigated.

Fluorenyl-tethered N-heterocyclic carbene (NHC): an exclusive C-donor ligand for heteroleptic calcium and strontium chemistry

Exclusive C-donating ligands are rarely used with kinetically labile heavier alkaline earths (Ca, Sr, Ba). We report herein the aptitude of a combination of NHC with fluorenyl connected by a flexible -(CH2)2- linker as a ligand support for heteroleptic Ca- and Sr-N(SiMe3)2 and iodides. The Ca-N(SiMe3)2 complex even catalyzes the intramolecular hydroamination of aminoalkenes to showcase the effectiveness of this ligand framework.

[{SiNDipp}MgNa]2: A Potent Molecular Reducing Agent

The bimetallic species, [{SiNDipp}MgNa]2 [{SiNDipp} = {CH2SiMe2N(Dipp)}2; (Dipp = 2,6-i-Pr2C6H3)], is shown to be a potent reducing agent, able to effect one- or two-electron reduction of either dioxygen, TEMPO, anthracene, benzophenone, or diphenylacetylene. In most cases, the bimetallic reaction products imply that the dissimilar alkaline metal centers react with a level of cooperativity. EPR analysis of the benzophenone-derived reaction and the concurrent isolation of [{SiNDipp}Mg(OCPh2)2], however, illustrate that treatment with such reducible, but O-basic, species can also result in reactivity in which the metals provide independent reaction products. The notable E-stereochemistry of the diphenylacetylene reduction product prompted a computational investigation of the PhC≡CPh addition. This analysis invokes a series of elementary steps that necessitate ring-opening via Mg+ → Na+ amido group migration of the SiNDipp ligand, providing insight into the previously observed lability of the bidentate dianion and its consequent proclivity toward macrocyclization.

Screening seven-electron boron-centered radicals for dinitrogen activation

The activation of dinitrogen is significant as nitrogen-containing compounds play an important role in industries. However, the inert NN triple bond caused by its large HOMO-LUMO gap (10.8 eV) and high bond dissociation energy (945 kJ mol-1 ) renders its activation under mild conditions particularly challenging. Recent progress shows that a few main group species can mimic transition metal complexes to activate dinitrogen. Here, we demonstrate that a series of seven-electron (7e) boron-centered radical can be used to activate N2 via density functional theory calculations. It is found that boron-centered radicals containing amine ligand perform best on the thermodynamics of dinitrogen activation. In addition, when electron-donating groups are introduced at the boron atom, these radicals can be used to activate N2 with low reaction barriers. Further analysis suggests that the electron transfer from the boron atom to the π* orbitals of dinitrogen is essential for its activation. Our findings suggest great potential of 7e boron radicals in the field of dinitrogen activation.

Trapping of a Terminal Intermediate in the Boron-Mediated Dinitrogen Reduction: Mono-, Tri-, and Tetrafunctionalized Hydrazines in Two Steps from N2

The addition of chlorotrimethylsilane to a boron-mediated, transition-metal-free N2 activation reaction leads to the isolation of multiple potassium boryl(silyl)hydrazido species, likely trapping products of a terminal dinitrogen complex of boron. One of these silylated N2 species can be protonated or methylated, providing access to mono- to tetrafunctionalized hydrazines in two steps from N2 and in the absence of transition metals.

Unsupervised machine learning reveals eigen reactivity of metal surfaces

The reactivity of metal surfaces is a cornerstone concept in chemistry, as metals have long been used as catalysts to accelerate chemical reactions. Although fundamentally important, the reactivity of metal surfaces has hitherto not been explicitly defined. For example, in order to compare the activity of two metal surfaces, a particular probe adsorbate, such as O, H, or CO, has to be specified, as comparisons may vary from probe to probe. Here we report that the metal surfaces actually have their own intrinsic/eigen reactivity, independent of any probe adsorbate. By employing unsupervised machine learning algorithms, specifically, principal component analysis (PCA), two dominant eigenvectors emerged from the binding strength dataset formed by 10 commonly used probes on 48 typical metal surfaces. According to their chemical characteristics revealed by vector decomposition, these two eigenvectors can be defined as the covalent reactivity and the ionic reactivity, respectively. Whereas the ionic reactivity turns out to be related to the work function of the metal surface, the covalent reactivity cannot be indexed by simple physical properties, but appears to be roughly connected with the valence-electron number normalized density of states at the Fermi level. Our findings expose that the metal surface reactivity is essentially a two-dimensional vector rather than a scalar, opening new horizons for understanding interactions at the metal surface.

Analysis of the Unusual Chemical Bonds and Dipole Moments of AeF- (Ae=Be-Ba): A Lesson in Covalent Bonding

Quantum chemical calculations of the anions AeF- (Ae=Be-Ba) have been carried out using ab initio methods at the CCSD(T)/def2-TZVPP level and density functional theory employing BP86 with various basis sets. The detailed bonding analyses using different charge- and energy partitioning methods show that the molecules possess three distinctively different dative bonds in the lighter species with Ae=Be, Mg and four dative bonds when Ae=Ca, Sr, Ba. The occupied 2p atomic orbitals (AOs) and to a lesser degree the occupied 2s AO of F- donate electronic charge into the vacant spx(σ) and p(π) orbitals of Be and Mg which leads to a triple bond Ae F-. The heavier Ae atoms Ca, Sr, Ba use their vacant (n-1)d AOs as acceptor orbitals which enables them to form a second σ donor bond with F- that leads to quadruply bonded Ae F- (Ae=Ca-Ba). The presentation of molecular orbitals or charge distribution using only one isodensity value may give misleading information about the overall nature of the orbital or charge distribution. Better insights are given by contour line diagrams. The ELF calculations provide monosynaptic and disynaptic basins of AeF- which nicely agree with the analysis of the occupied molecular orbitals and with the charge density difference maps. A particular feature of the covalent bonds in AeF- concerns the inductive interaction of F- with the soft valence electrons in the (n)s valence orbitals of Ae. The polarization of the (n)s2 electrons induces a (n)spx hybridized lone-pair orbital at atom Ae, which yields a large dipole moment with the negative end at Ae. The concomitant formation of a vacant (n)spx AO of atom Ae, which overlaps with the occupied 2p(σ) AO of F-, leads to a strong covalent σ bond.

Alkaline earth metal-assisted dinitrogen activation at nickel

Rare examples of trinuclear [Ni-N2-M-N2-Ni] core (M = Ca, Mg) with linear bridged dinitrogen ligands are reported in this work. The reduction of [iPr2NN]Ni(μ-Br)2Li(thf)2 (1) (iPr2NN = 2,4-bis-(2,6-diisopropylphenylimido)pentyl) with elemental Mg or Ca in THF under an atmosphere of dinitrogen yields the complex {iPr2NNNi(μ-N2)}2M (thf)4 (M = Mg, complex 2 and M = Ca, complex 3). The bridging end-on (μ-N2)2M(thf)4 moiety connects the two [iPr2NNNi]- nickelate fragments. A combination of X-ray crystallography, solution and solid-state spectroscopy have been applied to characterize complexes 2 and 3, and DFT studies have been used to help explain the bonding and electronic structure in these unique Ni-N2-Mg and Ni-N2-Ca complexes.

Tricoordinate Beryllium Radicals and Their Reactivity

The one-electron reduction of [(CAAC)Be(Dur)Br] (CAAC = cyclic alkyl(amino)carbene, Dur = 2,3,5,6-tetramethylphenyl = duryl) with lithium sand in diethyl ether yields the first neutral, tricoordinate, and moderately stable beryllium radical, [(CAAC)(Et2O)BeDur]• (2-Et2O), which undergoes a facile second one-electron reduction concomitant with the insertion of the beryllium center into the endocyclic C-NCAAC bond and a cyclopropane-forming C-H bond activation of an adjacent methyl group. In situ generation of 2-Et2O and addition of PMe3 yield the stable analogue, [(CAAC)(Me3P)BeDur]• (2-PMe3), which serves as a platform for PMe3-ligand exchange with stronger donors, generating the radicals [(CAAC)LBeDur]• (2-L, L = isocyanides, pyridines, and N-heterocyclic carbenes). X-ray structural analyses show trigonal-planar beryllium centers and strong π backbonding from the metal to the CAAC ligand. The EPR signals of all six isolated [(CAAC)LBeDur]• radicals display significant, albeit small, hyperfine coupling to the 9Be nucleus. DFT calculations show that the spin density is mostly delocalized over the CAAC π framework and, where present, the isocyanide CN moiety, with only a small proportion (3-6%) on the beryllium center. 2-PMe3 proved thermally unstable at 80 °C, first undergoing radical hydrogen abstraction with the solvent, followed by insertion of beryllium into the endocyclic C-NCAAC bond and PMe3 transfer to the former carbene carbon atom. The reactions with diphenyl disulfide and phenyl azide occur at the beryllium center and yield the corresponding Be(II) phenyl sulfide and amino complexes, respectively, the latter concomitant with radical transfer and hydrogen abstraction by the beryllium-bound nitrogen center.

Calcium-mediated nitrogen reduction for electrochemical ammonia synthesis

Ammonia (NH3) is a key commodity chemical for the agricultural, textile and pharmaceutical industries, but its production via the Haber-Bosch process is carbon-intensive and centralized. Alternatively, an electrochemical method could enable decentralized, ambient NH3 production that can be paired with renewable energy. The first verified electrochemical method for NH3 synthesis was a process mediated by lithium (Li) in organic electrolytes. So far, however, elements other than Li remain unexplored in this process for potential benefits in efficiency, reaction rates, device design, abundance and stability. In our demonstration of a Li-free system, we found that calcium can mediate the reduction of nitrogen for NH3 synthesis. We verified the calcium-mediated process using a rigorous protocol and achieved an NH3 Faradaic efficiency of 40 ± 2% using calcium tetrakis(hexafluoroisopropyloxy)borate (Ca[B(hfip)4]2) as the electrolyte. Our results offer the possibility of using abundant materials for the electrochemical production of NH3, a critical chemical precursor and promising energy vector.

Alkaline earth metals: homometallic bonding

The study of alkaline earth metal complexes is undergoing a renaissance. Stable molecular species featuring Mg-Mg bonds were reported in 2007 and their reactivity has since been intensively investigated. Motivated by this work, efforts have also been devoted to the synthesis of complexes featuring Be-Be and Ca-Ca bonds. These collective endeavours have revealed that the chemistry of the group 2 metals is richer and more complex than had previously been appreciated. Here, a discussion of the nature of homometallic alkaline earth bonding is presented, recent synthetic advances are described, and future directions are considered.

An orbitally adapted push-pull template for N2 activation and reduction to diazene-diide

A Lewis superacidic bis(borane) C6F4{B(C6F5)2}2 was reacted with tungsten N2-complexes [W(N2)2(R2PCH2CH2PR2)2] (R = Ph or Et), affording zwitterionic boryldiazenido W(ii) complexes trans-[W(L)(R2PCH2CH2PR2)2(N2{B(C6F5)2(C6F4B(C6F5)3})] (L = ø, N2 or THF). These compounds feature only one N-B linkage of the covalent type, as a result of intramolecular boron-to-boron C6F5 transfer. Complex trans-[W(THF)(Et2PCH2CH2PEt2)2(N2{B(C6F5)2C6F4B(C6F5)3})] (5) was shown to split H2, leading to a seven-coordinate complex [W(H)2(Et2PCH2CH2PEt2)2(N2{B(C6F5)2}2C6F4)] (7). Interestingly, hydride storage at the metal triggers backward C6F5 transfer. This reverts the bis(boron) moiety to its bis(borane) state, now doubly binding the distal N, with structural parameters and DFT computations pointing to dative N→B bonding. By comparison with an N2 complex [W(H)2(Et2PCH2CH2PEt2)2(N2{B(C6F5)3}] (10) differing only in the Lewis acid (LA), namely B(C6F5)3, coordinated to the distal N, we demonstrate that two-fold LA coordination imparts strong N2 activation up to the diazene-diide (N22-) state. To the best of our knowledge, this is the first example of a neutral LA coordination that induces reduction of N2.

Metal Vapour Synthesis of an Organometallic Barium(0) Synthon

A hydrocarbon-soluble barium anthracene complex was prepared by means of metal vapour synthesis. Reaction of 9,10-bis(trimethylsilyl)anthracene (Anth'') with barium vapour gave deep purple Ba(Anth'') which after extraction with diethyl ether crystallised as the cyclic octamer [Ba(Anth'')⋅Et2 O]8 . Dissolution in benzene or toluene led to replacement of the Et2 O ligand with a softer arene ligand and isolation of Ba(Anth'')⋅arene. Diffusion ordered spectroscopy (DOSY NMR ) measurements in benzene-d6 indicate solution species with a molecular weight that equals a trimeric constitution. Natural population analysis (NPA) assigned charges of +1.70 and -1.70 to Ba and Anth'', respectively, relating to highly ionic Ba2+ /Anth''2- bonding. Preliminary reactivity studies with air, Ph2 C=NPh, or H2 show that the complex reacts as a Ba0 synthon by release of neutral Anth''. This soluble molecular Ba0 /BaII redox synthon provides new routes for the syntheses of barium complexes under mild conditions.

Opportunities with calcium Grignard reagents and other heavy alkaline-earth organometallics

More than a century old, magnesium Grignard reagents remain essential to the toolbox of organic chemists. Although similar reagents with the neighbouring group 2 metal Ca have been explored, the considerably higher polarity and reactivity of the Ca-C bond result in undesired decomposition pathways. Ca Grignard reagents have found academic interest but have never fully developed into an established synthetic tool. Recent research activities, however, provide facile access to these highly reactive organocalcium species, including in situ preparation and ball milling approaches to tackle the challenge of controlling their extreme sensitivity. Heavier Grignard reagents are not just more reactive but profit from unique chemical transformations. Insight into the transition metal-like properties of Ca, Sr and Ba is only just emerging. Considering the rapidly developing field of alkaline-earth metal-mediated catalysis, heavy Grignard reagents will probably have a bright future.

Ammonia Synthesis via an Associative Mechanism on Alkaline Earth Metal Sites of Ca3 CrN3 H

Typically, transition metals are considered as the centers for the activation of dinitrogen. Here we demonstrate that the nitride hydride compound Ca3 CrN3 H, with robust ammonia synthesis activity, can activate dinitrogen through active sites where calcium provides the primary coordination environment. DFT calculations also reveal that an associative mechanism is favorable, distinct from the dissociative mechanism found in traditional Ru or Fe catalysts. This work shows the potential of alkaline earth metal hydride catalysts and other related 1 D hydride/electrides for ammonia synthesis.

The borderless world of chemical bonding across the van der Waals crust and the valence region

The definition of the van der Waals crust as the spherical section between the atomic radius and the van der Waals radius of an element is discussed and a survey of the application of the penetration index between two interacting atoms in a wide variety of covalent, polar, coordinative or noncovalent bonding situations is presented. It is shown that this newly defined parameter permits the comparison of bonding between pairs of atoms in structural and computational studies independently of the atom sizes.

Variable Ca-Caryl Hapticity and its Consequences in Arylcalcium Dimers

The dimeric β-diketiminato calcium hydride, [(Dipp BDI)CaH]2 (Dipp BDI = HC{(Me)CN-2,6-i-Pr2 C6 H3 }2 ), reacts with ortho-, meta- or para-tolyl mercuric compounds to afford hydridoarylcalcium compounds, [(Dipp BDI)2 Ca2 (μ-H)(μ-o-,m-,p-tolyl)], in which dimer propagation occurs either via μ2 -η1 -η1 or μ2 -η1 -η6 bridging between the calcium centers. In each case, the orientation and hapticity of the aryl units is dependent upon the position of the methyl substituent. While wholly organometallic meta- and para-tolyl dimers, [(Dipp BDI)Ca(m-tolyl)]2 and [(Dipp BDI)Ca(p-tolyl)]2 , can be prepared and are stable, the ortho-tolyl isomer is prone to isomerization to a calcium benzyl analog. Computational analysis of this latter process with density functional theory (DFT) highlights an unusual mechanism invoking the generation of an intermediate dicalcium species in which the group 2 centers are bridged by a toluene dianion formed by the formal attachment of the original hydride anion to the initially generated ortho-tolyl substituent. Use of a more sterically encumbered aryl substituent, {3,5-t-Bu2 C6 H3 }, facilitates the selective formation of [(Dipp BDI)Ca(μ-H)(μ-3,5-t-Bu2 C6 H3 )Ca(Dipp BDI)], which can be converted into the unsymmetrically-substituted σ-aryl calcium complexes, [(Dipp BDI)Ca(μ-Ph)(μ-3,5-t-Bu2 C6 H3 )Ca(Dipp BDI)] and [(Dipp BDI)Ca(μ-p-tolyl)(μ-3,5-t-Bu2 C6 H3 )Ca(Dipp BDI)] by reaction with the appropriate mercuric diaryl. Conversion of [(Dipp BDI)Ca(H)(Ph)Ca(Dipp BDI)] to afford [{{(Dipp BDI)Ca}2 (μ2 -Cl)}2 (C6 H5 -C6 H5 )], comprising a biphenyl dianion, is also reported. Although this latter transformation is serendipitous, AIM analysis highlights that, in a related manner to the ortho-tolyl to benzyl isomerization, the requisite C-C coupling may be facilitated in an "across dimer" fashion by the experimentally-observed polyhapto engagement of the aryl substituents with each calcium.

A Blueprint for the Stabilization of Sub-Valent Alkaline Earth Complexes

The study of sub-valent Group 2 chemistry is a relatively new research field, being established in 2007 with the report of the first Mg(I) dimers. These species are stabilized by the formation of a Mg-Mg covalent bond; however, the extension of this chemistry to heavier alkaline earth (AE) metals has been frustrated by significant synthetic challenges, primarily associated with the instability of heavy AE-AE interactions. Here we present a new blueprint for the stabilization of heavy AE(I) complexes, based upon the reduction of AE(II) precursors with planar coordination geometries. We report the synthesis and structural characterisation of homoleptic trigonal planar AE(II) complexes of the monodentate amides {N(SiMe3 )2 }- and {N(Mes)(SiMe3 )}- . DFT calculations showed that the LUMOs of these complexes all show some d-character for AE = Ca-Ba. DFT analysis of the square planar Sr(II) complex [Sr{N(SiMe3 )2 }(dioxane)2 ]∞ revealed analogous frontier orbital d-character. AE(I) complexes that could be accessed by reduction of these AE(II) precursors were modelled computationally, revealing exergonic formation in all cases. Crucially, NBO calculations show that some d-character is preserved in the SOMO of theoretical AE(I) products upon reduction, showing that d-orbitals could play a crucial role in achieving stable heavy AE(I) complexes.

Revealing unbound β-diketiminate anions: structural dynamics from caesium complexes

This study reports the first structural elucidation of β-diketiminate anions (BDI-), known for strong coordination, in their unbound form within caesium complexes. β-Diketiminate caesium salts (BDICs) were synthesised, and upon the addition of Lewis donor ligands, free BDI- anions and donor-solvated Cs+ cations were observed. Notably, the liberated BDI- anions exhibited an unprecedented dynamic cisoid-transoid exchange in solution.

Coordination and Activation of N2 at Low-Valent Magnesium using a Heterobimetallic Approach: Synthesis and Reactivity of a Masked Dimagnesium Diradical

The activation of dinitrogen (N2 ) by transition metals is central to the highly energy intensive, heterogeneous Haber-Bosch process. Considerable progress has been made towards more sustainable homogeneous activations of N2 with d- and f-block metals, though little success has been had with main group metals. Here we report that the reduction of a bulky magnesium(II) amide [(TCHP NON)Mg] (TCHP NON=4,5-bis(2,4,6-tricyclohexylanilido)-2,7-diethyl-9,9-dimethyl-xanthene) with 5 % w/w K/KI yields the magnesium-N2 complex [{K(TCHP NON)Mg}2 (μ-N2 )]. DFT calculations and experimental data show that the dinitrogen unit in the complex has been reduced to the N2 2- dianion, via a transient anionic magnesium(I) radical. The compound readily reductively activates CO, H2 and C2 H4 , in reactions in which it acts as a masked dimagnesium(I) diradical.