Enhanced Regulation of Selectivity by the Coupling Effects of Surface Acidity and Strain Effects via Precisely Controlling the Location of Pt

Loading a sensitizer and constructing a rational nanostructure have been reported to be effective approaches for enhancing the catalytic/sensing performance. However, the impact of the precise loading position on the catalytic/sensing performance is always overlooked. Here, we discovered that precisely changing the location of Pt clusters from the outside of Al2O3-ZnO nanocoils (O-PtAlZnNCs) to the inner side of the nanocoils (I-PtAlZnNCs) could change the sensing performance of the sensor from H2S to acetone. Furthermore, precisely loading Pt inside of the confined space led to a high sensing performance and reduced the limit of detection (LOD) of acetone by a factor of 50 times (from 100 to 2 ppb). Combining X-ray photoelectron spectroscopy (XPS), NH3-diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), in situ X-ray absorption spectroscopy (XAS), and density functional theory (DFT) simulations, the enhancement of sensitivity and regulation of sensing selectivity are attributed to the coupling effects from enrichment of confined space and Al2O3 acid-base active sites as well as the regulation of electronic structure by location-dominated strain effects. This work not only provides a novel sight to precisely regulate the selectivity and obtain ultrasensitive materials but also serves as a useful instruction for further understanding and precisely designing specific sensors and catalysts with high performance.

Atomically Dispersed Palladium Catalyst for Chemoselective Hydrogenation of Quinolines

Chemoselective hydrogenation of quinoline and its derivatives is a significant strategy to achieve the corresponding 1,2,3,4-tetrahydroquinolines (py-THQ) for various potential applications. Here, we precisely constructed a titanium carbide supported atomically dispersed Pd catalyst (PdSA+NC/TiC) for quinoline hydrogenation, delivering above 99% py-THQ selectivity at complete conversion with an outstanding turnover frequency (TOF) of 463 h-1. AC-HAADF-STEM and XAFS demonstrate that the atomic dispersion of Pd includes Pd-Ti2C2 single atoms and Pd clusters with atomic-layer thickness. Theoretical calculation and experimental results revealed that H2 dissociation and subsequent hydrogenation rates were greatly promoted over Pd clusters. Although the adsorption of quinolines and intermediates are easier on Pd clusters than on Pd single atoms, the desorption of py-THQ is more favored over Pd single atoms than over Pd clusters. The desorption step may be the main reason for 5,6,7,8-tetrahydroquinoline (bz-THQ) and decahydroquinoline (DHQ) formation. Thus, a low reaction activity and py-THQ selectivity were received over PdSA/TiC and PdNP/TiC, respectively.

Tailoring Catalysis of Encapsulated Platinum Nanoparticles by Pore Wall Engineering of Covalent Organic Frameworks

While supported metal nanoparticles (NPs) have shown significant promise in heterogeneous catalysis, precise control over their interaction with the support, which profoundly impacts their catalytic performance, remains a significant challenge. In this study, Pt NPs are incorporated into thioether-functionalized covalent organic frameworks (denoted COF-Sx), enabling precise control over the size and electronic state of Pt NPs by adjusting the thioether density dangling on the COF pore walls. Notably, the resulting Pt@COF-Sx demonstrate exceptional selectivity (> 99 %) in catalytic hydrogenation of p-chloronitrobenzene to p-chloroaniline, in sharp contrast to the poor selectivity of Pt NPs embedded in thioether-free COFs. Furthermore, the conversion over Pt@COF-Sx exhibits a volcano-type curve as the thioether density increases, due to the corresponding change of accessible Pt sites. This work provides an effective approach to regulating the catalysis of metal NPs via their microenvironment modulation, with the aid of rational design and precise tailoring of support structure.

Supported IrO2 Nanocatalyst with Multilayered Structure for Proton Exchange Membrane Water Electrolysis

The design of a low-iridium-loading anode catalyst layer with high activity and durability is a key challenge for a proton exchange membrane water electrolyzer (PEMWE). Here, the synthesis of a novel supported IrO2 nanocatalyst with a tri-layered structure, dubbed IrO2@TaOx@TaB that is composed of ultrasmall IrO2 nanoparticles anchored on amorphous TaOx overlayer of TaB nanorods is reported. The composite electrocatalyst shows great activity and stability toward the oxygen evolution reaction (OER) in acid, thanks to its dual-interface structural feature. The electronic interaction in IrO2/TaOx interface can regulate the coverage of surface hydroxyl groups, the Ir3+/ Ir4+ ratio, and the redox peak potential of IrO2 for enhancing OER activity, while the dense TaOx overlayer can prevent further oxidation of TaB substrate and stabilize the IrO2 catalytic layers for improving structural stability during OER. The IrO2@TaOx@TaB can be used to fabricate an anode catalyst layer of PEMWE with an iridium-loading as low as 0.26 mg cm-2. The low-iridium-loading PEMWE delivers high current densities at low cell voltages (e.g., 3.9 A cm-2@2.0 V), and gives excellent activity retention for more than 1500 h at 2.0 A cm-2 current density.

Asymmetric Coupled Binuclear-Site Catalysts for Low-Temperature Selective Acetylene Semi-Hydrogenation

Heterogeneous metal catalysts with bifunctional active sites are widely used in chemical industries. Although their improvement process is typically based on trial-and-error, it is hindered by the lack of model catalysts. Herein, we report an effective vacancy-pair capturing strategy to fabricate 12 heterogeneous binuclear-site catalysts (HBSCs) comprising combinations of transition metals on titania. During the synthesis of these HBSCs, proton-passivation treatment and step-by-step electrostatic anchorage enabled the suppression of single-atom formation and the successive capture of two target metal cations on the titanium-oxygen vacancy-pair site. Additionally, during acetylene hydrogenation at 20 °C, the HBSCs (e.g., Pt1Pd1-TiO2) consistently generated more than two times the ethylene produced by their single-atom counterparts (e.g., Pd1-TiO2). Furthermore, the Pt1Pd1 binuclear sites in Pt1Pd1-TiO2 were demonstrated to catalyze C2H2 hydrogenation via a bifunctional active-site mechanism: initially C2H2 chemisorb on the Pt1 site, then H2 dissociates and migrates from Pd1 to Pt1, and finally hydrogenation occurs at the Pt1-Pd1 interface.

Strong Metal-Support Interaction Triggered by Molten Salts

Strong metal-support interaction (SMSI) plays a vital role in tuning the geometric and electronic structures of metal species. Generally, a high-temperature treatment (>500 °C) in reducing atmosphere is required for constructing SMSI, which may induce the sintering of metal species. Herein, we use molten salts as the reaction media to trigger the formation of high-intensity SMSI at reduced temperatures. The strong ionic polarization of the molten salt promotes the breakage of Ti-O bonds in the TiO2 support, and hence decreases the energy barrier for the formation of interfacial bonds. Consequently, a high-intensity SMSI state is achieved in TiO2 supported Ir nanoclusters, evidenced by a large number of Ir-Ti bonds at the interface, at a low temperature of 350 °C. Moreover, this method is applicable for triggering SMSI in various supported metal catalysts with different oxide supports including CeO2 and SnO2. This newly developed SMSI construction methodology opens a new avenue and holds significant potential for engineering advanced supported metal catalysts toward a broad range of applications.

Colloidal Templating in Catalyst Design for Thermocatalysis

Conventional catalyst preparative methods commonly entail the impregnation, precipitation, and/or immobilization of nanoparticles on their supports. While convenient, such methods do not readily afford the ability to control collective ensemble-like nanoparticle properties, such as nanoparticle proximity, placement, and compartmentalization. In this Perspective, we illustrate how incorporating colloidal templating into catalyst design for thermocatalysis confers synthetic advantages to facilitate new catalytic investigations and augment catalytic performance, focusing on three colloid-templated catalyst structures: 3D macroporous structures, hierarchical macro-mesoporous structures, and discrete hollow nanoreactors. We outline how colloidal templating decouples the nanoparticle and support formation steps to devise modular catalyst platforms that can be flexibly tuned at different length scales. Of particular interest is the raspberry colloid templating (RCT) method which confers high thermomechanical stability by partially embedding nanoparticles within its support, while retaining high levels of reactant accessibility. We illustrate how the high modularity of the RCT approach allows one to independently control collective nanoparticle properties, such as nanoparticle proximity and localization, without concomitant changes to other catalytic descriptors that would otherwise confound analyses of their catalytic performance. We next discuss how colloidal templating can be employed to achieve spatially disparate active site functionalization while directing reactant transport within the catalyst structure to enhance selectivity in multistep catalytic cascades. Throughout this Perspective, we highlight developments in advanced characterization that interrogate transport phenomena and/or derive new insights into these catalyst structures. Finally, we offer our outlook on the future roles, applications, and challenges of colloidal templating in catalyst design for thermocatalysis.

Zeolite-Templated Carbons Supported Rh and Ru Electrocatalysts for Highly Active Hydrogen Evolution Reaction

Here, we report the systematical synthesis of zeolite-templated carbon (ZTC) supported Ru and Rh mono- or bi-metallic electrocatalysts towards hydrogen evolution reaction (HER). The zeolite A or ZSM-5 derived ZTC supports and metal sites were adjusted, and all electrocatalysts outperformed the commercial Pt/C electrocatalyst for HER performance. In particular, the RhRu/(ZTC/ZSM5) sample exhibited superior catalytic performance with the overpotential of 24.8 mV@10 mA ⋅ cm-2, and outstanding stability with 1 mV drop after 20000 cyclic voltammetry circles. This work offers a simple impregnation method for the synthesis of highly performed HER electrocatalysts supported on porous zeolite-templated carbon.

Acceleration of Zeolite Crystallization: Current Status, Mechanisms, and Perspectives

Zeolites are important classes of crystalline materials and possess well-defined channels and cages with molecular dimensions. They have been extensively employed as heterogeneous catalysts and gas adsorbents due to their relatively large specific surface areas, high pore volumes, compositional flexibility, definite acidity, and hydrothermal stability. The zeolite synthesis normally undergoes high-temperature hydrothermal treatments with a relatively long crystallization time, which exhibits low synthesis efficiency and high energy consumption. Various strategies, e.g., modulation of the synthesis gel compositions, employment of special silica/aluminum sources, addition of seeds, fluoride, hydroxyl (·OH) free radical initiators, and organic additives, regulation of the crystallization conditions, development of new approaches, etc., have been developed to overcome these obstacles. And, these achievements make prominent contributions to the topic of acceleration of the zeolite crystallization and promote the fundamental understanding of the zeolite formation mechanism. However, there is a lack of the comprehensive summary and analysis on them. Herein, we provide an overview of the recent achievements, highlight the significant progress in the past decades on the developments of novel and remarkable strategies to accelerate the crystallization of zeolites, and basically divide them into three main types, i.e., chemical methods, physical methods, and the derived new approaches. The principles/acceleration mechanisms, effectiveness, versatility, and degree of reality for the corresponding approaches are thoroughly discussed and summarized. Finally, the rational design of the prospective strategies for the fast synthesis of zeolites is commented on and envisioned. The information gathered here is expected to provide solid guidance for developing a more effective route to improve the zeolite crystallization and obtain the functional zeolite-based materials with more shortened durations and lowered cost and further promote their applications.

Crystal epitaxy-confined Pd, Ti-bimetallic sites in the MFI zeolite for benzylalcohol oxidation

A general strategy for confining Pd, Ti-bimetallic sites in the MFI zeolite by crystal epitaxy was developed. The tailored spatial intimacy of the bimetallic sites demonstrated distinct catalytic performance for the oxidation of benzylalcohol. The related mechanism was clarified and afforded a valuable pathway for rational catalyst design.

Electron-electron scattering limits thermal conductivity of metals under extremely high electron temperatures

We report on the thermal transport properties of noble metals (gold, silver and copper) under conditions of extremely high electron temperatures (that are on the order of the Fermi energy). We perform parameter-free density functional theory calculations of the electron temperature-dependent electron-phonon coupling, electronic heat capacities, and thermal conductivities to elucidate the strong role played by the excitation of the low lyingd-bands on the transport properties of the noble metals. Our calculations show that, although the three metals have similar electronic band structures, the changes in their electron-phonon coupling at elevated electron temperatures are drastically different; while electron-phonon coupling decreases in gold, it increases in copper and, it remains relatively unperturbed for silver with increasing electron temperatures of up to ∼60 000 K (or 5 eV). We attribute this to the varying contributions from acoustic and longitudinal phonon modes to the electron-phonon coupling in the three metals. Although their electron-phonon coupling changes with electron temperature, the thermal conductivity trends with electron temperature are similar for all three metals. For instance, the thermal conductivities for all three metals reach their maximum values (on par with the room-temperature values of some of the most thermally conductive semiconductors) at electron temperatures of ∼6000 K, and thereafter monotonically decrease due to the enhanced effect of electron-electron scattering for electronic states that are further away from the Fermi energy. As such, only accounting for electron-phonon coupling and neglecting electron-electron scattering can lead to large over-predictions of the thermal conductivities at extremely high electron temperatures. Our results shed light on the microscopic understanding of the electronic scattering mechanisms and thermal transport in noble metals under conditions of extremely high electron temperatures and, as such, are significant for a plethora of applications such as in plasmonic devices that routinely leverage hot electron transport.

Regulating the spatial arrangement of CuO and MgO within activated carbon matrix to maximize their room temperature H2S removal

Adsorbents with dual-component active phases have attracted much attention owing to their potential application in synergistic H2S removal. The influence of spatial arrangements of two components within a support matrix on their desulfurization performance was investigated through regulating the mutual arrangements of CuO and MgO on an activated carbon surface. Their spatial locations were found to remarkably affect interfacial interactions, local pH, the conductivity of adsorbents, and electronic structure of copper oxide. A close contact of CuO with the carbon surface led to strong interactions of both components, inhibiting the reduction of CuO and decreasing its reactivity with H2S. On the other hand, a proximity of MgO to the carbon surface increased local pH, promoting the oxidation of H2S into elemental S, instead of sulfates. Cu+ in the copper oxide phase increased the desulfurization performance due to its ability to activate oxygen and to accelerate a lattice diffusion. Enhanced surface conductivity due to the interfacial interactions improved the desulfurization efficiency and favored the formation of elemental S through promoting an electron transfer in redox reactions.

Strengthening the Metal-Acid Interactions by Using CeO2 as Regulators of Precisely Placing Pt Species in ZSM-5 for Furfural Hydrogenation

Understanding the synergism between the metal site and acid site is of great significance in boosting the efficiency of bi-functional catalysts in many heterogeneous reactions, particularly in biomass upgrading. Herein, a "confined auto-redox" strategy is reported to fix CeO2-anchored Pt atoms on the inner wall of a ZSM-5 cage, achieving the target of finely controlling the placements of the two active sites. Compared with the conventional surface-supported counterpart, the encapsulated Pt/CeO2@ZSM-5 catalyst possesses remarkably-improved activity and selectivity, which can convert >99% furfural into cyclopentanone with 97.2% selectivity in 6 h at 160 °C. Besides the excellent catalytic performance, the ordered metal-acid distribution also makes such kind of catalyst an ideal research subject for metal-acid interactions. The following mechanization investigation reveals that the enhancement is strongly related to the unique encapsulation structure, which promotes the migration of the reactants over different active sites, thereby contributing to the tandem reaction.

3D Noble-Metal Nanostructures Approaching Atomic Efficiency and Atomic Density Limits

Noble metals have been widely used in catalysis, however, the scarcity and high cost of noble metal motivate researchers to balance the atomic efficiency and atomic density, which is formidably challenging. This article proposes a robust strategy for fabricating 3D amorphous noble metal-based oxides with simultaneous enhancement on atomic efficiency and density with the assistance of atomic channels, where the atomic utilization increases from 18.2% to 59.4%. The unique properties of amorphous bimetallic oxides and formation of atomic channels have been evidenced by detailed experimental characterizations and theoretical simulations. Moreover, the universality of the current strategy is validated by other binary oxides. When Cu2IrOx with atomic channels (Cu2IrOx-AE) is used as catalyst for oxygen evolution reaction (OER), the mass activity and turnover frequency value of Cu2IrOx-AE are 1-2 orders of magnitude higher than CuO/IrO2 and Cu2IrOx without atomic channels, largely outperforming the reported OER catalysts. Theoretical calculations reveal that the formation of atomic channels leads to various Ir sites, on which the proton of adsorbed *OH can transfer to adjacent O atoms of [IrO6]. This work may attract immediate interest of researchers in material science, chemistry, catalysis, and beyond.

Hybrid oxide coatings generate stable Cu catalysts for CO2 electroreduction

Hybrid organic/inorganic materials have contributed to solve important challenges in different areas of science. One of the biggest challenges for a more sustainable society is to have active and stable catalysts that enable the transition from fossil fuel to renewable feedstocks, reduce energy consumption and minimize the environmental footprint. Here we synthesize novel hybrid materials where an amorphous oxide coating with embedded organic ligands surrounds metallic nanocrystals. We demonstrate that the hybrid coating is a powerful means to create electrocatalysts stable against structural reconstruction during the CO2 electroreduction. These electrocatalysts consist of copper nanocrystals encapsulated in a hybrid organic/inorganic alumina shell. This shell locks a fraction of the copper surface into a reduction-resistant Cu2+ state, which inhibits those redox processes responsible for the structural reconstruction of copper. The electrocatalyst activity is preserved, which would not be possible with a conventional dense alumina coating. Varying the shell thickness and the coating morphology yields fundamental insights into the stabilization mechanism and emphasizes the importance of the Lewis acidity of the shell in relation to the retention of catalyst structure. The synthetic tunability of the chemistry developed herein opens new avenues for the design of stable electrocatalysts and beyond.

Discriminating the Active Ru Species Towards the Selective Generation of Singlet Oxygen from Peroxymonosulfate: Nanoparticles Surpass Single-Atom Catalysts

Singlet oxygen (1O2) is an exceptional reactive oxygen species in advanced oxidation processes for environmental remediation. Despite single-atom catalysts (SACs) representing the promising candidate for the selective generation of 1O2 from peroxymonosulfate (PMS), the necessity to meticulously regulate the coordination environment of metal centers poses a significant challenge in the precisely-controlled synthetic method. Another dilemma to SACs is their high surface free energy, which results in an inherent tendency for the surface migration and aggregation of metal atoms. We here for the first time reported that Ru nanoparticles (NPs) synthesized by the facile pyrolysis method behave as robust Fenton-like catalysts, outperforming Ru SACs, towards efficient activation of PMS to produce 1O2 with nearly 100 % selectivity, remarkably improving the degradation efficiency for target pollutants. Density functional theory calculations have unveiled that the boosted PMS activation can be attributed to two aspects: (i) enhanced adsorption of PMS molecules onto Ru NPs, and (ii) decreased energy barriers by offering adjacent sites for promoted dimerization of *O intermediates into adsorbed 1O2. This study deepens the current understanding of PMS chemistry, and sheds light on the design and optimization of Fenton-like catalysts.

Direct Oxidation of Methane to Methanol over Transition-Metal-Free Ferrierite Zeolite Catalysts

Direct oxidation of methane to methanol was reported to be highly dependent on the transition- or noble-metal-loading catalysts in the past decades. Here, we show that the transition-metal-free aluminosilicate ferrierite (FER) zeolite effectively catalyzed methane and N2O to methanol for the first time. The distorted tetracoordinated Al in the framework and pentacoordinated Al on the extra framework formed during calcination, activation, and reaction processes were confirmed as the potential active centers. The possible reaction pathway similar to the Fe-containing zeolites was advocated based on the reaction results using different oxidants, N2O adsorption FTIR spectra, and 27Al MAS NMR spectra. The stable and efficient methanol production capacity of FER zeolite was ascribed to the two-dimensional straight channels and its distinctive Al distribution of FER zeolite (CP914C) from Zeolyst. The transition-metal-free FER zeolite performed better than the record in the literature and our recent results using transition-metal-containing catalysts in terms of selectivity and formation rate of methanol and stability. This work has great significance and prospects for utilizing CH4 and N2O as resources and will open new avenues for methane oxidation.

Tailoring the Brønsted acidity of Ti-OH species by regulating Pt-TiO2 interaction

Bifunctional catalysts comprising metal and acid sites are commonly used for many reactions. Interfacial acid sites impact intermediate reactions more than other sites. However, controlling the type and amounts of interfacial acid sites by regulating metal-support interaction (MSI) via traditional methods is difficult. Thus, the influence of MSI on interfacial acid sites remains unclear. We prepared Pt-mTiO2/α-Al2O3 (m represents the cycle number of TiO2) catalysts via atomic layer deposition (ALD). New Brønsted acid sites were generated via Pt-TiO2 interaction, and the acidity was precisely regulated by regulating Pt-TiO2 interaction by changing the TiO2 nanolayer thickness. We chose levulinic acid (LA) hydrogenation as a model reaction. The catalytic activity varied with the TiO2 nanolayer thickness and was linearly correlated with the Ti-OH species (Brønsted acid) content. Pt-40TiO2/α-Al2O3, with the highest acid site content of 0.486 mmol/g, exhibited the best catalytic activity. Hydrogen spillover and water dissociation at the Pt-TiO2 interface promoted Ti-OH species generation.

Reversible Intrapore Redox Cycling of Platinum in Platinum-Ion-Exchanged HZSM-5 Catalysts

Isolated platinum(II) ions anchored at acid sites in the pores of zeolite HZSM-5, initially introduced by aqueous ion exchange, were reduced to form platinum nanoparticles that are stably dispersed with a narrow size distribution (1.3 ± 0.4 nm in average diameter). The nanoparticles were confined in reservoirs within the porous zeolite particles, as shown by electron beam tomography and the shape-selective catalysis of alkene hydrogenation. When the nanoparticles were oxidatively fragmented in dry air at elevated temperature, platinum returned to its initial in-pore atomically dispersed state with a charge of +2, as shown previously by X-ray absorption spectroscopy. The results determine the conditions under which platinum is retained within the pores of HZSM-5 particles during redox cycles that are characteristic of the reductive conditions of catalyst operation and the oxidative conditions of catalyst regeneration.

Understanding the effect of spatially separated Cu and acid sites in zeolite catalysts on oxidation of methane

Unraveling the effect of spatially separated bifunctional sites on catalytic reactions is significant yet challenging. In this report, we investigate the role of spatial separation on the oxidation of methane in a series of Cu-exchanged aluminosilicate zeolites. Regulation of the bifunctional sites is done either through studying a physical mixture of Cu-exchanged zeolites and acidic zeolites or by systematically varying the Cu and acid density within a family of zeolite materials. We show that separated Cu and acid sites are beneficial for the formation of hydrocarbons while high-density Cu sites, which are closer together, facilitate the production of CO2. By contrast, a balance of the spatial separation of Cu and acid sites shows more favorable formation of methanol. This work will further guide approaches to methane oxidation to methanol and open an avenue for promoting hydrocarbon synthesis using methanol as an intermediate.

Structured Catalysts and Catalytic Processes: Transport and Reaction Perspectives

The structure of catalysts determines the performance of catalytic processes. Intrinsically, the electronic and geometric structures influence the interaction between active species and the surface of the catalyst, which subsequently regulates the adsorption, reaction, and desorption behaviors. In recent decades, the development of catalysts with complex structures, including bulk, interfacial, encapsulated, and atomically dispersed structures, can potentially affect the electronic and geometric structures of catalysts and lead to further control of the transport and reaction of molecules. This review describes comprehensive understandings on the influence of electronic and geometric properties and complex catalyst structures on the performance of relevant heterogeneous catalytic processes, especially for the transport and reaction over structured catalysts for the conversions of light alkanes and small molecules. The recent research progress of the electronic and geometric properties over the active sites, specifically for theoretical descriptors developed in the recent decades, is discussed at the atomic level. The designs and properties of catalysts with specific structures are summarized. The transport phenomena and reactions over structured catalysts for the conversions of light alkanes and small molecules are analyzed. At the end of this review, we present our perspectives on the challenges for the further development of structured catalysts and heterogeneous catalytic processes.

Polyethylene Upgrading to Liquid Fuels Boosted by Atomic Ce Promoters

Hydrocracking catalysis is a key route to plastic waste upgrading, but the acid site-driven C-C cleavage step is relatively sluggish in conventional bifunctional catalysts, dramatically effecting the overall efficiency. We demonstrate here a facile and efficient way to boost the reactivity of acid sites by introducing Ce promoters into Pt/HY catalysts, thus achieving a better metal-acid balance. Remarkably, 100 % of low-density polyethylene (LDPE) can be converted with 80.9 % selectivity of liquid fuels over the obtained Pt/5Ce-HY catalysts at 300 °C in 2 h. For comparison, Pt/HY only gives 38.8 % of LDPE conversion with 21.3 % selectivity of liquid fuels. Through multiple experimental studies on the structure-performance relationship, the Ce species occupied in the supercage are identified as the actual active sites, which possess remarkably-improved adsorption capability towards short-chain intermediates.

Generating active metal/oxide reverse interfaces through coordinated migration of single atoms

Identification of active sites in catalytic materials is important and helps establish approaches to the precise design of catalysts for achieving high reactivity. Generally, active sites of conventional heterogeneous catalysts can be single atom, nanoparticle or a metal/oxide interface. Herein, we report that metal/oxide reverse interfaces can also be active sites which are created from the coordinated migration of metal and oxide atoms. As an example, a Pd1/CeO2 single-atom catalyst prepared via atom trapping, which is otherwise inactive at 30 °C, is able to completely oxidize formaldehyde after steam treatment. The enhanced reactivity is due to the formation of a Ce2O3-Pd nanoparticle domain interface, which is generated by the migration of both Ce and Pd atoms on the atom-trapped Pd1/CeO2 catalyst during steam treatment. We show that the generation of metal oxide-metal interfaces can be achieved in other heterogeneous catalysts due to the coordinated mobility of metal and oxide atoms, demonstrating the formation of a new active interface when using metal single-atom material as catalyst precursor.

Reference-Quality Free Energy Barriers in Catalysis from Machine Learning Thermodynamic Perturbation Theory

For the first time, we report calculations of the free energies of activation of cracking and isomerization reactions of alkenes that combine several different electronic structure methods with molecular dynamics simulations. We demonstrate that the use of a high level of theory (here Random Phase Approximation-RPA) is necessary to bridge the gap between experimental and computed values. These transformations, catalyzed by zeolites and proceeding via cationic intermediates and transition states, are building blocks of many chemical transformations for valorization of long chain paraffins originating, e.g., from plastic waste, vegetable oils, Fischer-Tropsch waxes or crude oils. Compared with the free energy barriers computed at the PBE+D2 production level of theory via constrained ab initio molecular dynamics, the barriers computed at the RPA level by the application of Machine Learning thermodynamic Perturbation Theory (MLPT) show a significant decrease for isomerization reaction and an increase of a similar magnitude for cracking, yielding an unprecedented agreement with the results obtained by experiments and kinetic modeling.

Integrated Optimization of Crystal Facets and Nanoscale Spatial Confinement toward the Boosted Catalytic Performance of Pd Nanocrystals

Tuning the surface chemical property and the local environment of nanocrystals is crucial for realizing a high catalytic performance in various reactions. Herein, we aim to elucidate the structure sensitivity of Pd facets on the surface catalytic hydrogenation reaction and to identify what role the nanoconfinement effect plays in the catalytic properties of Pd nanocrystal catalysts. By controlling the coating structures of mesoporous silica (mSiO2) on Pd nanocrystals with different exposed facets that include {100}, {111}, and {hk0}, we present a series of Pd@mSiO2 nanoreactors in core-shell and yolk-shell structures and the discovery of a partial-coated structure, which can provide different types of nanoconfinement, and we propose a seed size-dominated growth mechanism. We demonstrate that a superior activity was exhibited in Pd nanocrystals enclosed by the {hk0} facet as compared to the Pd{100} and Pd{111} facets, and substantially enhanced efficiency and stability were achieved in Pd@mSiO2 particles with yolk-shell structures, indicating a crucial superiority of optimizing the configuration of crystal facets and nanoconfinement. Our study provides an efficient strategy to rationally design and optimize nanocatalysts for promoting catalytic performance.

Tandem catalysts of different crystalline In2O3/sheet HZSM-5 zeolite for CO2 hydrogenation to aromatics

In tandem catalysts, not only good synergy between the two active components is required, but also the precise control of the spatial distribution between the two active components of metal oxides and zeolite is crucial for the migration and conversion of reaction intermediates in the direct conversion of CO2 to hydrocarbons. The correlation between the metal and the acidic site of zeolite has traditionally been simplified as "the closer, the better". However, it should be noted that this principle only holds true for a portion of tandem catalysts. Therefore, this paper studied the effect of different crystalline In2O3 (cubic phase, hexagonal phase, and mixed cubic/hexagonal phase) and sheet HZSM-5 zeolite tandem catalysts on the activity of CO2 hydrogenation reaction under different spatial distribution. The generalized gradient approximation (GGA) of density functional theory (DFT) were used to simulate the adsorption energy of CO2 by oxygen vacancy on c-In2O3(111) and h-In2O3(104) planes, it was found that Ov1 on c-In2O3(111) and Ov4 on h-In2O3(104) had the strongest adsorption energy for CO2. In addition, it has been observed that the proximity of the two active components (e.g., during mortar mixing) results in decreased catalytic performance. This is due to the migration of metal In, which neutralizes the acid sites of zeolites and leads to inefficient conversion of methanol reaction intermediates to aromatics. As a result, CO2 conversion and aromatic selectivity are decreased.

Precise arrangement of metal atoms at the interface by a thermal printing strategy

The kinetics and pathway of most catalyzed reactions depend on the existence of interface, which makes the precise construction of highly active single-atom sites at the reaction interface a desirable goal. Herein, we propose a thermal printing strategy that not only arranges metal atoms at the silica and carbon layer interface but also stabilizes them by strong coordination. Just like the typesetting of Chinese characters on paper, this method relies on the controlled migration of movable nanoparticles between two contact substrates and the simultaneous emission of atoms from the nanoparticle surface at high temperatures. Observed by in situ transmission electron microscopy, a single Fe3O4 nanoparticle migrates from the core of a SiO2 sphere to the surface like a droplet at high temperatures, moves along the interface of SiO2 and the coated carbon layer, and releases metal atoms until it disappears completely. These detached atoms are then in situ trapped by nitrogen and sulfur defects in the carbon layer to generate Fe single-atom sites, exhibiting excellent activity for oxygen reduction reaction. Also, sites' densities can be regulated by controlling the size of Fe3O4 nanoparticle between the two surfaces. More importantly, this strategy is applicable to synthesize Mn, Co, Pt, Pd, Au single-atom sites, which provide a general route to arrange single-atom sites at the interface of different supports for various applications.

Ultrasmall Pd Clusters in FER Zeolite Alleviate CO Poisoning for Effective Low-Temperature Carbon Monoxide Oxidation

Ultrasmall Pd4 clusters form in the micropores of FER zeolite during low-temperature treatment (100 °C) in the presence of humid CO gas. They effectively catalyze CO oxidation below 100 °C, whereas Pd nanoparticles are not active as they are poisoned by CO. Using catalytic measurements, infrared (IR) spectroscopy, X-ray absorption spectroscopy (EXAFS), microscopy, and density functional theory calculations, we provide the molecular-level insight into this previously unreported phenomenon. Pd nanoparticles get covered with CO at low temperatures, which effectively blocks O2 activation until CO desorption occurs. Small Pd clusters in zeolites, in contrast, demonstrate fluxional behavior in the presence of CO, which significantly increases the affinity for binding O2. Our study provides a pathway to achieve low-temperature CO oxidation activity on the basis of a well-defined Pd/zeolite system.

Entropy Confinement Promotes Hydrogenolysis Activity for Polyethylene Upcycling

Chemical upcycling that catalyzes waste plastics back to high-purity chemicals holds great promise in end-of-life plastics valorization. One of the main challenges in this process is the thermodynamic limitations imposed by the high intrinsic entropy of polymer chains, which makes their adsorption on catalysts unfavorable and the transition state unstable. Here, we overcome this challenge by inducing the catalytic reaction inside mesoporous channels, which possess a strong confined ability to polymer chains, allowing for stabilization of the transition state. This approach involves the synthesis of p-Ru/SBA catalysts, in which Ru nanoparticles are uniformly distributed within the channels of an SBA-15 support, using a precise impregnation method. The unique design of the p-Ru/SBA catalyst has demonstrated significant improvements in catalytic performance for the conversion of polyethylene into high-value liquid fuels, particularly diesel. The catalyst achieved a high solid conversion rate of 1106 g ⋅ gRu -1  ⋅ h-1 at 230 °C. Comparatively, this catalytic activity is 4.9 times higher than that of a control catalyst, Ru/SiO2 , and 14.0 times higher than that of a commercial catalyst, Ru/C, at 240 °C. This remarkable catalytic activity opens up immense opportunities for the chemical upcycling of waste plastics.

Methane dehydroaromatization catalyzed by Mo/ZSM-5: location-steered activity and mechanism

This work examined the location-steered catalytic behavior of Mo/ZSM-5 catalyst for one-step methane dehydroaromatization to benzene reaction. The results indicated that α-site is the preferred location for the formation of ethylene, the main intermediate for aromatics production via the propagation pathway, while δ-site is favorable for the hydrocarbon pool aggregation reaction pathway.

Cu-Based Catalysts Supported on H3PO4-Activated Coffee Biochar for Selective Reduction of Nitroaromatics

Selective reduction of nitroaromatics to the corresponding aromatic amines is extremely an attractive chemical process for both fundamental research and potential commercial applications. Herewith, we report that a highly dispersed Cu catalyst supported on H₃PO₄-activated coffee biochar and the resulting Cu/PBCR-600 catalyst show complete conversion of the nitroaromatics and >97.0% selectivity for the corresponding aromatic amines. The TOF of catalyzing the reduction of nitroaromatics (1.55-460.74 min^-1) is approximately 2 to 15 times higher than those of previously reported non-noble and even noble metal catalysts. Additionally, Cu/PBCR-600 also shows high stability in catalytic recycles. Furthermore, it exhibits long-term catalytic stability (660 min) for practical application in a continuous-flow reactor. The characterizations and activity tests reveal that Cu⁰ existing in Cu/PBCR-600 acts as an active site in nitroaromatics reduction. Also, the further characterization by FTIR and UV-vis demonstrates that N, P co-doped coffee biochar could selectively adsorb and activate the nitro group of nitroaromatics.

Coordination Chemistry of Large-Sized Yttrium Single-Atom Catalysts for Oxygen Reduction Reaction

Although being transition metals, the Fenton-inactive group 3-4 elements (Sc, Y, La, Ti, Zr, and Hf) can easily lose all the outermost s and d electrons, leaving behind ionic sites with nearly empty outermost orbitals that are stable but inactive for oxygen involved catalysis. Here, it is demonstrated that the dynamic coordination network can turn these commonly inactive ionic sites into platinum-like catalytic centers for the oxygen reduction reaction (ORR). Using density functional theory calculations, a macrocyclic ligand coordinated yttrium single-atom (YN₄ ) moiety is identified, which is originally ORR inactive because of the too strong binding of hydroxyl intermediate, while it can be activated by an axial ligand X through the covalency competition between YX and YOH bonds. Strikingly, it is also found that the binding force of the axially coordinated ligand is an effective descriptor, and the chlorine ligand is screened out with an optimal binding force that behaves self-adaptively to facilitate each ORR intermediate steps by dynamically changing its YCl covalency. These experiments validate that the as-designed YN₄ -Cl moieties embedded within the carbon framework exhibit a high half-wave potential (E_1/2 = 0.85 V) in alkaline media, the same as that of the commercial Pt/C catalyst .

Epitaxial growth of highly symmetrical branched noble metal-semiconductor heterostructures with efficient plasmon-induced hot-electron transfer

Epitaxial growth is one of the most commonly used strategies to precisely tailor heterostructures with well-defined compositions, morphologies, crystal phases, and interfaces for various applications. However, as epitaxial growth requires a small interfacial lattice mismatch between the components, it remains a challenge for the epitaxial synthesis of heterostructures constructed by materials with large lattice mismatch and/or different chemical bonding, especially the noble metal-semiconductor heterostructures. Here, we develop a noble metal-seeded epitaxial growth strategy to prepare highly symmetrical noble metal-semiconductor branched heterostructures with desired spatial configurations, i.e., twenty CdS (or CdSe) nanorods epitaxially grown on twenty exposed (111) facets of Ag icosahedral nanocrystal, albeit a large lattice mismatch (more than 40%). Importantly, a high quantum yield (QY) of plasmon-induced hot-electron transferred from Ag to CdS was observed in epitaxial Ag-CdS icosapods (18.1%). This work demonstrates that epitaxial growth can be achieved in heterostructures composed of materials with large lattice mismatches. The constructed epitaxial noble metal-semiconductor interfaces could be an ideal platform for investigating the role of interfaces in various physicochemical processes.

Synergism between hierarchical MFI zeolites and alumina in alkene cross-metathesis reactions as a function of composition

Synergism between hierarchical zeolites and alumina in the preparation of active Mo catalysts, as a function of composition ratios, has been demonstrated in the cross-metathesis reaction between ethene and 2-butene. The metathesis reaction activity, reflected by ethene conversion, increases from 24.1% to 49.2% with the increase in the alumina content in composites from 10 wt% to 30 wt%. A further increase in the alumina content leads to the reduction in the metathesis activity, in which the ethene conversion decreases from 30.3% to 4.8% upon the enhanced alumina content from 50 wt% to 90 wt%. The impact of alumina content on the metathesis activity is closely associated with the interaction mode between the hierarchical ZSM-5 zeolite and alumina. TEM observation as well as EDS analysis and XPS results prove the progressive coating of alumina phase on the surface of zeolites along with the progressive enhancement of alumina content. The moderate alumina content in the composite enables the desired interaction between hierarchical zeolites and alumina, which is beneficial for the preparation of active catalysts for the alkene cross-metathesis reaction.

Silicalite-1 Layer Secures the Bifunctional Nature of a CO2 Hydrogenation Catalyst

Close proximity usually shortens the travel distance of reaction intermediates, thus able to promote the catalytic performance of CO₂ hydrogenation by a bifunctional catalyst, such as the widely reported In₂O₃/H-ZSM-5. However, nanoscale proximity (e.g., powder mixing, PM) more likely causes the fast deactivation of the catalyst, probably due to the migration of metals (e.g., In) that not only neutralizes the acid sites of zeolites but also leads to the reconstruction of the In₂O₃ surface, thus resulting in catalyst deactivation. Additionally, zeolite coking is another potential deactivation factor when dealing with this methanol-mediated CO₂ hydrogenation process. Herein, we reported a facile approach to overcome these three challenges by coating a layer of silicalite-1 (S-1) shell outside a zeolite H-ZSM-5 crystal for the In₂O₃/H-ZSM-5-catalyzed CO₂ hydrogenation. More specifically, the S-1 layer (1) restrains the migration of indium that preserved the acidity of H-ZSM-5 and at the same time (2) prevents the over-reduction of the In₂O₃ phase and (3) improves the catalyst lifetime by suppressing the aromatic cycle in a methanol-to-hydrocarbon conversion step. As such, the activity for the synthesis of C₂ ⁺ hydrocarbons under nanoscale proximity (PM) was successfully obtained. Moreover, an enhanced performance was observed for the S-1-coated catalyst under microscale proximity (e.g., granule mixing, GM) in comparison to the S-1-coating-free counterpart. This work highlights an effective shielding strategy to secure the bifunctional nature of a CO₂ hydrogenation catalyst.

Solid-State Synthesis of Aluminophosphate Zeotypes by Calcination of Amorphous Precursors

Because of the growing interest in the applications of zeolitic materials and the various challenges associated with traditional synthesis methods, the development of novel synthesis approaches remains of fundamental importance. Herein, we report a general route for the synthesis of aluminophosphate (AlPO) zeotypes by simple calcination of amorphous precursors at moderate temperatures (250-450 °C) for short reaction times (3-60 min). Accordingly, highly crystalline AlPO zeotypes with various topologies of AST, SOD, LTA, AEL, AFI, and -CLO, ranging from ultra-small to extra-large pores, have been successfully synthesized. Multinuclear multidimensional solid-state NMR techniques combined with complementary operando mass spectrometry (MS), powder X-ray diffraction, high-resolution transmission electron microscopy, and Raman characterizations reveal that covalently bonded fluoride in the intermediates catalyze the bond breaking and remaking processes. The confined organic structure-directing agents with high thermal stability direct the ordered rearrangement. This novel synthesis strategy not only shows excellent synthesis efficiency in terms of a simple synthesis procedure, a fast crystallization rate, and a high product yield, but also sheds new light on the crystallization mechanism of zeolitic materials.

Steering the Metal Precursor Location in Pd/Zeotype Catalysts and Its Implications for Catalysis

Bifunctional catalysts containing a dehydrogenation–hydrogenation function and an acidic function are widely applied for the hydroconversion of hydrocarbon feedstocks obtained from both fossil and renewable resources. It is well known that the distance between the two functionalities is important for the performance of the catalyst. In this study, we show that the heat treatment of the catalyst precursor can be used to steer the location of the Pd precursor with respect to the acid sites in SAPO-11 and ZSM-22 zeotype materials when ions are exchanged with Pd(NH3)4(NO3)2. Two sets of catalysts were prepared based on composite materials of alumina with either SAPO-11 or ZSM-22. Pd was placed on/in the zeotype, followed by a calcination-reduction (CR) or direct reduction (DR) treatment. Furthermore, catalysts with Pd on the alumina binder were prepared. CR results in having more Pd nanoparticles inside the zeotype crystals, whereas DR yields more particles on the outer surface of the zeotype crystals as is confirmed using HAADF-STEM and XPS measurements. The catalytic performance in both n-heptane and n-hexadecane hydroconversion of the catalysts shows that having the Pd nanoparticles on the alumina binder is most beneficial for maximizing the isomer yields. Pd-on-zeotype catalysts prepared using the DR approach show intermediate performances, outperforming their Pd-in-zeotype counterparts that were prepared with the CR approach.

Engineering nanoscale H supply chain to accelerate methanol synthesis on ZnZrOx

Metal promotion is the most widely adopted strategy for enhancing the hydrogenation functionality of an oxide catalyst. Typically, metal nanoparticles or dopants are located directly on the catalyst surface to create interfacial synergy with active sites on the oxide, but the enhancement effect may be compromised by insufficient hydrogen delivery to these sites. Here, we introduce a strategy to promote a ZnZrO_x methanol synthesis catalyst by incorporating hydrogen activation and delivery functions through optimized integration of ZnZrO_x and Pd supported on carbon nanotube (Pd/CNT). The CNT in the Pd/CNT + ZnZrO_x system delivers hydrogen activated on Pd to a broad area on the ZnZrO_x surface, with an enhancement factor of 10 compared to the conventional Pd-promoted ZnZrO_x catalyst, which only transfers hydrogen to Pd-adjacent sites. In CO₂ hydrogenation to methanol, Pd/CNT + ZnZrO_x exhibits drastically boosted activity-the highest among reported ZnZrO_x-based catalysts-and excellent stability over 600 h on stream test, showing potential for practical implementation.

The Extent of Platinum-Induced Hydrogen Spillover on Cerium Dioxide

Hydrogen spillover from metal nanoparticles to oxides is an essential process in hydrogenation catalysis and other applications such as hydrogen storage. It is important to understand how far this process is reaching over the surface of the oxide. Here, we present a combination of advanced sample fabrication of a model system and in situ X-ray photoelectron spectroscopy to disentangle local and far-reaching effects of hydrogen spillover in a platinum-ceria catalyst. At low temperatures (25-100 °C and 1 mbar H2) surface O-H formed by hydrogen spillover on the whole ceria surface extending microns away from the platinum, leading to a reduction of Ce4+ to Ce3+. This process and structures were strongly temperature dependent. At temperatures above 150 °C (at 1 mbar H2), O-H partially disappeared from the surface due to its decreasing thermodynamic stability. This resulted in a ceria reoxidation. Higher hydrogen pressures are likely to shift these transition temperatures upward due to the increasing chemical potential. The findings reveal that on a catalyst containing a structure capable to promote spillover, hydrogen can affect the whole catalyst surface and be involved in catalysis and restructuring.

Detecting Cage Crossing and Filling Clusters of Magnesium and Carbon Atoms in Zeolite SSZ-13 with Atom Probe Tomography

The conversion of methanol to valuable hydrocarbon molecules is of great commercial interest, as the process serves as a sustainable alternative for the production of, for instance, the base chemicals for plastics. The reaction is catalyzed by zeolite materials. By the introduction of magnesium as a cationic metal, the properties of the zeolite, and thereby the catalytic performance, are changed. With atom probe tomography (APT), nanoscale relations within zeolite materials can be revealed: i.e., crucial information for a fundamental mechanistic understanding. We show that magnesium forms clusters within the cages of zeolite SSZ-13, while the framework elements are homogeneously distributed. These clusters of just a few nanometers were analyzed and visualized in 3-D. Magnesium atoms seem to initially be directed to the aluminum sites, after which they aggregate and fill one or two cages in the zeolite SSZ-13 structure. The presence of magnesium in zeolite SSZ-13 increases the lifetime as well as the propylene selectivity. By using operando UV-vis spectroscopy and X-ray diffraction techniques, we are able to show that these findings are related to the suppression of aromatic intermediate products, while maintaining the formation of polyaromatic compounds. Further nanoscale analysis of the spent catalysts showed indications of magnesium redistribution after catalysis. Unlike zeolite H-SSZ-13, for which only a homogeneous distribution of carbon was found, carbon can be either homogeneously or heterogeneously distributed within zeolite Mg-SSZ-13 crystals as the magnesium decreases the coking rate. Carbon clusters were isolated, visualized, and analyzed and were assumed to be polyaromatic compounds. Small one-cage-filling polyaromatic compounds were identified; furthermore, large-cage-crossing aromatic molecules were found by isolating large coke clusters, demonstrating the unique coking mechanism in zeolite SSZ-13. Short-length-scale evidence for the formation of polyaromatic compounds at acid sites is discovered, as clear nanoscale relations between aluminum and carbon atoms exist.

A novel geo-photocatalyst, an iron-containing layered clay mineral, for photocatalytic H2 evolution from water

An iron-containing layered clay mineral was discovered as a novel geo-photocatalyst found in nature for hydrogen evolution from water.

Boosting propane dehydroaromatization by confining PtZn alloy nanoparticles within H-ZSM-5 crystals

A Pt–Zn@H-ZSM-5 catalyst with Pt–Zn alloy nanoparticles confined in H-ZSM-5 crystals exhibits a significantly improved performance in the propane dehydroaromatization reaction.