Salt-resistant alpha-helical cationic antimicrobial peptides

A novel cathelicidin TS-CATH derived from Thamnophis sirtalis combats drug-resistant gram-negative bacteria in vitro and in vivo

Antimicrobial peptides are promising therapeutic agents for treating drug-resistant bacterial disease due to their broad-spectrum antimicrobial activity and decreased susceptibility to evolutionary resistance. In this study, three novel cathelicidin antimicrobial peptides were identified from Thamnophis sirtalis, Balaenoptera musculus, and Lipotes vexillifer by protein database mining and sequence alignment and were subsequently named TS-CATH, BM-CATH, and LV-CATH, respectively. All three peptides exhibited satisfactory antibacterial activity and broad antibacterial spectra against clinically isolated E. coli, P. aeruginosa, K. pneumoniae, and A. baumannii in vitro. Among them, TS-CATH displayed the best antimicrobial/bactericidal activity, with a rapid elimination efficiency against the tested drug-resistant gram-negative bacteria within 20 min, and exhibited the lowest cytotoxicity toward mammalian cells. Furthermore, TS-CATH effectively enhanced the survival rate of mice with ceftazidime-resistant E. coli bacteremia and promoted wound healing in meropenem-resistant P. aeruginosa infection. These results were achieved through the eradication of bacterial growth in target organs and wounds, further inhibiting the systemic dissemination of bacteria and the inflammatory response. TS-CATH exhibited direct antimicrobial activity by damaging the inner and outer membranes, resulting in leakage of the bacterial contents at super-MICs. Moreover, TS-CATH disrupted the bacterial respiratory chain, which inhibited ATP synthesis and induced ROS formation, significantly contributing to its antibacterial efficacy at sub-MICs. Overall, TS-CATH has potential for use as an antibacterial agent.

Antibacterial Materials: Influence of the Type and Conditions of Biological Tests on the Measured Antibacterial Activity

In recent years, the growing problem of antibiotic resistance has highlighted the need for antibacterial materials to prevent the development of infections. Different types of tests exist to certify the antibacterial properties of materials. Variations in results can occur due to the unique requirements of each test technique. The antibacterial test result may be influenced, in particular, by the distinct modes of action of leaching and non-leaching compounds. Using antibacterial materials prepared by the dispersion of an amphiphilic cationic synthetic copolymer in a polyurethane matrix, the influence of the reaction medium and the contact time on the results obtained by two well-established tests: ISO 22196 and CERTIKA is investigated. This shows that the kinetics of killing is bacteria dependent and depending on the test conditions (concentration of salt, time of contact, or media), contradictory results could be obtained. Moreover, the influence of the ionic strength (called salt effect) in both free solution and antibacterial surface is highlighted.

Novel design of simplified β-hairpin antimicrobial peptide as a potential food preservative based on Trp-pocket backbone

Food contamination from microbial deterioration requires the development of potent antimicrobial peptides (AMPs). The deployment of approved AMPs as dietary preservatives is limited due to barriers such as instability, toxicity, and high synthetic costs. This exploration utilizes the primary structural elements of the Trp-pocket backbone to engineer a series of β-hairpin AMPs (XWRWRPGXKXXR-NH2, X representing I, V, F, and/or L). Peptides WpLF, with Phe as X and Leu arranged at the 11th position, demonstrated exceptional selectivity index (SI = 123.08) and sterilization effects both in vitro and in vivo. WpLF consistently exhibited stable bacteriostasis, regardless of physiological salts, serum, and extreme pH. Mechanistic analysis indicated that the peptide penetrates microbial cell membranes, inducing membrane disruption, thereby impeding drug resistance evolution. Conclusively, AMPs engineered by the Trp-pocket skeleton hold substantial potential as innovative biological preservatives in food preservation, providing valuable insights for sustainable and safe peptide-based food preservatives.

Development strategies and application of antimicrobial peptides as future alternatives to in-feed antibiotics

The use of in-feed antibiotics has been widely restricted due to the significant environmental pollution and food safety concerns they have caused. Antimicrobial peptides (AMPs) have attracted widespread attention as potential future alternatives to in-feed antibiotics owing to their demonstrated antimicrobial activity and environment friendly characteristics. However, the challenges of weak bioactivity, immature stability, and low production yields of natural AMPs impede practical application in the feed industry. To address these problems, efforts have been made to develop strategies for approaching the AMPs with enhanced properties. Herein, we summarize approaches to improving the properties of AMPs as potential alternatives to in-feed antibiotics, mainly including optimization of structural parameters, sequence modification, selection of microbial hosts, fusion expression, and industrially fermentation control. Additionally, the potential for application of AMPs in animal husbandry is discussed. This comprehensive review lays a strong theoretical foundation for the development of in-feed AMPs to achieve the public health globally.

Antifungal Plant Defensins as an Alternative Tool to Combat Candidiasis

Currently, the spread of fungal infections is becoming an urgent problem. Fungi of the Candida genus are opportunistic microorganisms that cause superficial and life-threatening systemic candidiasis in immunocompromised patients. The list of antifungal drugs for the treatment of candidiasis is very limited, while the prevalence of resistant strains is growing rapidly. Therefore, the search for new antimycotics, including those exhibiting immunomodulatory properties, is of great importance. Plenty of natural compounds with antifungal activities may be extremely useful in solving this problem. This review evaluates the features of natural antimicrobial peptides, namely plant defensins as possible prototypes of new anticandidal agents. Plant defensins are important components of the innate immune system, which provides the first line of defense against pathogens. The introduction presents a brief summary regarding pathogenic Candida species, the pathogenesis of candidiasis, and the mechanisms of antimycotic resistance. Then, the structural features of plant defensins, their anticandidal activities, their mechanisms of action on yeast-like fungi, their ability to prevent adhesion and biofilm formation, and their combined action with conventional antimycotics are described. The possible mechanisms of fungal resistance to plant defensins, their cytotoxic activity, and their effectiveness in in vivo experiments are also discussed. In addition, for the first time for plant defensins, knowledge about their immunomodulatory effects is also presented.

Characterization of LL37 Binding to Collagen through Peptide Modification with a Collagen-Binding Domain

Collagen-based biomaterials loaded with antimicrobial peptides (AMPs) present a promising approach for promoting wound healing while providing protection against infections. In our previous work, we modified the AMP LL37 by incorporating a collagen-binding domain (cCBD) as an anchoring unit for collagen-based wound dressings. We demonstrated that cCBD-modified LL37 (cCBD-LL37) exhibited improved retention on collagen after washing with PBS. However, the binding mechanism of cCBD-LL37 to collagen remained to be elucidated. In this study, we found that cCBD-LL37 showed a slightly higher affinity for collagen compared to LL37. Our results indicated that cCBD inhibited cCBD-LL37 binding to collagen but did not fully eliminate the binding. This suggests that cCBD-LL37 binding to collagen may involve more than just one-site-specific binding through the collagen-binding domain, with non-specific interactions also playing a role. Electrostatic studies revealed that both LL37 and cCBD-LL37 interact with collagen via long-range electrostatic forces, initiating low-affinity binding that transitions to close-range or hydrophobic interactions. Circular dichroism analysis showed that cCBD-LL37 exhibited enhanced structural stability compared to LL37 under varying ionic strengths and pH conditions, implying potential improvements in antimicrobial activity. Moreover, we demonstrated that the release of LL37 and cCBD-LL37 into the surrounding medium was influenced by the electrostatic environment, but cCBD could enhance the retention of peptide on collagen scaffolds. Collectively, these results provide important insights into cCBD-modified AMP-binding mechanisms and suggest that the addition of cCBD may enhance peptide structural stability and retention under varying electrostatic conditions.

Bio-inspired peptide-conjugated liposomes for enhanced planktonic bacteria killing and biofilm eradication

Developing new antimicrobial agents has become an urgent task to address the increasing prevalence of multidrug-resistant pathogens and the emergence of biofilms. Cationic antimicrobial peptides (AMPs) have been regarded as promising candidates due to their unique non-specific membrane rupture mechanism. However, a series of problems with the peptides hindered their practical application due to their high toxicity and low bioactivity and stability. Here, inspired by broadening the application of cell-penetrating peptides (CPPs), we selected five different sequences of cationic peptides which are considered as both CPPs and AMPs, and developed a biomimetic strategy to construct cationic peptide-conjugated liposomes with the virus-like structure for both enhancements of antibacterial efficacy and biosafety. The correlation between available peptide density/peptide variety and antimicrobial capabilities was evaluated from quantitative perspectives. Computational simulation and experimental investigations assisted to identify the optimal peptide-conjugated liposomes and revealed that the designed system provides high charge density for enhanced anionic bacterial membrane binding capability without compromised cytotoxicity, being capable of enhanced antibacterial efficacy of bacteria/biofilm of clinically important pathogens. The bio-inspired design has shown enhanced therapeutic efficiency of peptides and may promote the development of next-generation antimicrobials.

Global Trends in Research of Antimicrobial Peptides for the Treatment of Drug-Resistant Bacteria from 1995 to 2021: A Bibliometric Analysis

Background

Antimicrobial peptides (AMPs) can act on the bacterial cell membrane to play an antibacterial role in types of drug-resistant bacteria. Therefore, AMPs have attracted more and more attention in the treatment of drug-resistant bacteria.

Methods

Bibliometric analysis was employed to sort out the development and trends in the research of AMPs in the treatment of drug-resistant bacteria and map the knowledge structure for scholars.

Results

Since 2010, the publications and citations in this field have exploded, indicating a growing global interest in the field of AMPs for the treatment of drug-resistant bacteria. And as major countries in this field, China and the USA had conducted very in-depth exchanges and cooperation, which had injected a steady stream of impetus into this field. Both old and new scholars have made efforts, and related fields have developed rapidly, especially in the synthesis and improvement of novel AMPs. In recent years, research directions in the field of AMPs for the treatment of drug-resistant bacteria gradually focused on the practical application, optimization of drug delivery mode, optimization of synthesis mode, screening of new AMPs and other fields, indicating that the relevant research results of AMPs for the treatment of drug-resistant bacteria had entered the actual clinical stage, with higher practical significance.

Conclusion

The research history, global research status, future research hotspots, and trends of the research of AMPs in the treatment of drug-resistant bacteria were discussed in depth in this study, which can provide research references and inspiration for researchers inside and outside the related field.

Probing local changes to α-helical structures with 2D IR spectroscopy and isotope labeling

α-Helical secondary structures impart specific mechanical and physiochemical properties to peptides and proteins, enabling them to perform a vast array of molecular tasks ranging from membrane insertion to molecular allostery. Loss of α-helical content in specific regions can inhibit native protein function or induce new, potentially toxic, biological activities. Thus, identifying specific residues that exhibit loss or gain of helicity is critical for understanding the molecular basis of function. Two-dimensional infrared (2D IR) spectroscopy coupled with isotope labeling is capable of capturing detailed structural changes in polypeptides. Yet, questions remain regarding the inherent sensitivity of isotope-labeled modes to local changes in α-helicity, such as terminal fraying; the origin of spectral shifts (hydrogen-bonding versus vibrational coupling); and the ability to definitively detect coupled isotopic signals in the presence of overlapping side chains. Here, we address each of these points individually by characterizing a short, model α-helix (DPAEAAKAAAGR-NH2) with 2D IR and isotope labeling. These results demonstrate that pairs of 13C18O probes placed three residues apart can detect subtle structural changes and variations along the length of the model peptide as the α-helicity is systematically tuned. Comparison of singly and doubly labeled peptides affirm that frequency shifts arise primarily from hydrogen-bonding, while vibrational coupling between paired isotopes leads to increased peak areas that can be clearly differentiated from underlying side-chain modes or uncoupled isotope labels not participating in helical structures. These results demonstrate that 2D IR in tandem with i,i+3 isotope-labeling schemes can capture residue-specific molecular interactions within a single turn of an α-helix.

Combined Use of Antimicrobial Peptides with Antiseptics against Multidrug-Resistant Bacteria: Pros and Cons

Antimicrobial peptides (AMPs) are acknowledged as a promising template for designing new antimicrobials. At the same time, existing toxicity issues and limitations in their pharmacokinetics make topical application one of the less complicated routes to put AMPs-based therapeutics into actual medical practice. Antiseptics are one of the common components for topical treatment potent against antibiotic-resistant pathogens but often with toxicity limitations of their own. Thus, the interaction of AMPs and antiseptics is an interesting topic that is also less explored than combined action of AMPs and antibiotics. Herein, we analyzed antibacterial, antibiofilm, and cytotoxic activity of combinations of both membranolytic and non-membranolytic AMPs with a number of antiseptic agents. Fractional concentration indices were used as a measure of possible effective concentration reduction achievable due to combined application. Cases of both synergistic and antagonistic interaction with certain antiseptics and surfactants were identified, and trends in the occurrence of these types of interaction were discussed. The data may be of use for AMP-based drug development and suggest that the topic requires further attention for successfully integrating AMPs-based products in the context of complex treatment. AMP/antiseptic combinations show promise for creating topical formulations with improved activity, lowered toxicity, and, presumably, decreased chances of inducing bacterial resistance. However, careful assessment is required to avoid AMP neutralization by certain antiseptic classes in either complex drug design or AMP application alongside other therapeutics/care products.

Activity and Synergy of Cu-ATCUN Antimicrobial Peptides

Antibiotic resistance demands innovative strategies and therapies. The pairs of antimicrobial peptides tested in this work show broad-spectrum synergy and are capable of interacting with diverse bacterial membranes. In most cases, the ATCUN motif enhanced the activity of peptides tested in combination. Our studies also show CP10A to be a multifaceted peptide, displaying both cell membrane and intracellular activity and acting as a chameleon, improving the activity of other peptides as needed. The results of the synergy experiments demonstrate the importance of varied modes of action and how these changes can affect the ability to combat pathogens, while also illustrating the value of the metal-binding domain in enhancing the activity of antimicrobial peptides in combination.

Optimized proteolytic resistance motif (DabW)-based U1-2WD: A membrane-induced self-aggregating peptide to trigger bacterial agglutination and death

The biggest application bottleneck of antimicrobial peptides (AMPs) is the low oral bioavailability caused by the poor stability of digestive enzymes in the gastrointestinal tract. However, the research methods and evaluation criteria of available studies about anti-proteolytic strategies are not uniform and far from the actual environment in vivo. Here, we developed a research system and evaluation criteria for proteolytic resistance and systematically evaluated the effectiveness of different strategies for improving the protease stability of AMPs on the same platform for the first time. After a comprehensive analysis, Dab modification is identified as the most effective strategy to improve the trypsin stability of AMPs. By further modulating the proteolytic resistance optimization motif (DabW)_n, U1-2WD is obtained with ideal stability and antimicrobial properties in vivo and in vitro. Notably, U1-2WD has a unique antibacterial mechanism, which forms amorphous aggregates in the bacteria environment to trigger the agglutination of bacterial cells to prevent bacterial escape. It then kills bacteria by disrupting bacterial membranes and inhibiting bacterial energy metabolism. Overall, our work has led to a new understanding of the effectiveness of proteolytic resistance strategies and accelerated the development of anti-proteolytic AMPs to combat multidrug-resistant bacterial infections. STATEMENT OF SIGNIFICANCE: We developed research system and evaluation criteria for proteolytic resistance and systematically evaluated the effectiveness of different strategies for improving protease stability of AMPs on the same platform for the first time. we found effective strategies to resist trypsin hydrolysis: modification with backbone (β-Arg), D-enantiomer (D-Arg) and L-2,4-diaminobutanoic acid (Dab). Further, the proteolytic resistance optimization motif (DabW)n was designed. When n=3, derivative U1-2WD was obtained with desirable stability and antimicrobial properties in vivo and in vitro. Notably, U1-2WD has a unique antibacterial mechanism, which can self-aggregate into amorphous aggregates in the bacteria environment to mediate the agglutination and sedimentation of bacterial cells to prevent bacterial escape, and then kill bacteria by destroying bacterial membranes and inhibiting bacterial energy metabolism.

The design of cell-selective tryptophan and arginine-rich antimicrobial peptides by introducing hydrophilic uncharged residues

Antimicrobial peptides (AMPs) are considered to be powerful weapons in the fight against traditional antibiotic resistance due to their unique membrane-disruptive mechanism. The combination of traditional and classical hydrophobic tryptophan (W) residues and hydrophilic charged arginine (R) residues is considered as the first choice for the minimalist design of AMPs due to its potent performance in antibacterial activity. However, some W- and R-rich AMPs that are not rationally designed and contain excessive repeats of W and R residues may cause severe cytotoxicity and hemolysis. To address this issue, we designed the (WRX)_n (where X = hydrophilic uncharged amino residues; n = number of repeat units) series engineered peptides with high cell selectivity by introducing hydrophilic uncharged threonine (T), serine (S), glutamine (Q) or asparagine (N) residues into the minimalist design of W- and R-rich AMPs. The results showed that the introduction of these hydrophilic uncharged amino residues, especially T residues, significantly improved the cell selectivity of the W- and R-rich engineered peptides. Among (WRX)_n series engineered peptides, T6 presents a mixture structure of β-turn and α-helix. It has broad spectrum and potent antibacterial activity (no activity against probiotics), good biocompatibility, high selectivity index, strong tolerance (physiological salts, serum acid, alkali, and heat conditions), rapid and efficient time-kill kinetics, and no tendency of resistance. Studies on antibacterial mechanism show that T6 exert antibacterial activity mainly by disrupting bacterial cell membrane and inducing the accumulation of reactive oxygen species in bacterial cells. Furthermore, T6 exhibited potent antibacterial and anti-inflammatory capabilities in vivo in a mouse peritonitis-sepsis model infected with Escherichia coli. In conclusion, our study confirms an effective strategy for the minimalist design of highly cell selective W- and R-rich AMPs by introducing hydrophilic uncharged T residues, which may trigger widespread attention to hydrophilic uncharged amino acid residues, including T residues, and provide new insights into the design of peptide-based antibacterial biomaterials. STATEMENT OF SIGNIFICANCE: We have introduced hydrophilic uncharged T, S, Q or N residues into the minimalist design of W- and R-rich engineered peptides and found that the introduction of these hydrophilic uncharged amino residues, especially the T residues, can significantly improve the cell selectivity of W- and R-rich engineered peptides. The target compound T6 showed potent antibacterial activity, high cell selectivity, strong tolerance, good in vivo efficacy and killed bacteria through multiple mechanisms mainly membrane-disruptive. These findings may spark widespread interest in hydrophilic uncharged amino acid residues, and provide new insights into the design of peptide-based antimicrobial biomaterials.

Assessing the Activity of Antimicrobial Peptides Against Common Marine Bacteria Located in Rotifer (Brachionus plicatilis) Cultures

Rotifers are used as the first feed for marine fish larvae and are grown in large cultures that have high loads of organic matter and heterotrophic bacteria; these bacteria are passed on to the developing fish larvae and can potentially lead to bacterial infections. A modified minimum inhibitory concentration (MIC) protocol for antimicrobial peptides was used to determine the potency of ten antimicrobial peptides (AMPs) in artificial seawater relevant to a rotifer culture (salinity of 25‰) against common marine pathogens. All of the AMPs had antimicrobial activity against the bacterial isolates when the salt concentration was approximately zero. However, in high salt concentrations, the majority of the AMPs had an MIC value greater than 65 µg mL⁻¹ in artificial seawater (25‰). The only exceptions were 2009 (32.5 µg mL⁻¹) and 3002 (32.5 µg mL⁻¹) against Vibrio rotiferianus and Tenacibaculum discolor, respectively. The selected synthetic AMPs were not effective at reducing the bacterial load in brackish salt concentrations of a typical commercial rotifer culture (25‰).

PaP1, a Broad-Spectrum Lysin-Derived Cationic Peptide to Treat Polymicrobial Skin Infections

Most skin infections, including those complicating burns, are polymicrobial involving multiple causative bacteria. Add to this the fact that many of these organisms may be antibiotic-resistant, and a simple skin lesion or burn could soon become life-threatening. Membrane-acting cationic peptides from Gram-negative bacteriophage lysins can potentially aid in addressing the urgent need for alternative therapeutics. Such peptides natively constitute an amphipathic region within the structural composition of these lysins and function to permit outer membrane permeabilization in Gram-negative bacteria when added externally. This consequently allows the lysin to access and degrade the peptidoglycan substrate, resulting in rapid hypotonic lysis and bacterial death. When separated from the lysin, some of these cationic peptides kill sensitive bacteria more effectively than the native molecule via both outer and cytoplasmic membrane disruption. In this study, we evaluated the antibacterial properties of a modified cationic peptide from the broad-acting lysin PlyPa01. The peptide, termed PaP1, exhibited potent in vitro bactericidal activity toward numerous high priority Gram-positive and Gram-negative pathogens, including all the antibiotic-resistant ESKAPE pathogens. Both planktonic and biofilm-state bacteria were sensitive to the peptide, and results from time-kill assays revealed PaP1 kills bacteria on contact. The peptide was bactericidal over a wide temperature and pH range and could withstand autoclaving without loss of activity. However, high salt concentrations and complex matrices were found to be largely inhibitory, limiting its use to topical applications. Importantly, unlike other membrane-acting antimicrobials, PaP1 lacked cytotoxicity toward human cells. Results from a murine burn wound infection model using methicillin-resistant Staphylococcus aureus or multidrug-resistant Pseudomonas aeruginosa validated the in vivo antibacterial efficacy of PaP1. In these studies, the peptide enhanced the potency of topical antibiotics used clinically for treating chronic wound infections. Despite the necessity for additional preclinical drug development, the collective data from our study support PaP1 as a potential broad-spectrum monotherapy or adjunctive therapy for the topical treatment of polymicrobial infections and provide a foundation for engineering future lysin-derived peptides with improved antibacterial properties.

Antimicrobial peptides: Promising alternatives over conventional capture ligands for biosensor-based detection of pathogenic bacteria

The detection of pathogenic bacteria using biosensing techniques could be a potential alternative to traditional culture based methods. However, the low specificity and sensitivity of conventional biosensors, critically related to the choice of bio-recognition elements, limit their practical applicability. Mammalian antibodies have been widely investigated as biorecognition ligands due to high specificity and technological advancement in antibody production. However, antibody-based biosensors are not considered as an efficient approach due to the batch-to-batch inconsistencies as well as low stability. In recent years, antimicrobial peptides (AMPs) have been increasingly investigated as ligands as they have demonstrated high stability and possessed multiple sites for capturing bacteria. The conjugation of chemo-selective groups with AMPs has allowed effective immobilization of peptides on biosensor surface. However, the specificity of AMPs is a major concern for consideration as an efficient ligand. In this article, we have reviewed the advances and concerns, particularly the selectivity of AMPs for specific detection of pathogenic bacteria. This review also focuses the state-of-the-art mechanisms, challenges and prospects for designing potential AMP conjugated biosensors. The application of AMP in different biosensing transducers such as electrochemical, optical and piezoelectric varieties has been widely discussed. We argue that this review would provide insights to design and construct AMP conjugated biosensors for the pathogenic bacteria detection.

The multifaceted nature of antimicrobial peptides: current synthetic chemistry approaches and future directions

Bacterial infections caused by 'superbugs' are increasing globally, and conventional antibiotics are becoming less effective against these bacteria, such that we risk entering a post-antibiotic era. In recent years, antimicrobial peptides (AMPs) have gained significant attention for their clinical potential as a new class of antibiotics to combat antimicrobial resistance. In this review, we discuss several facets of AMPs including their diversity, physicochemical properties, mechanisms of action, and effects of environmental factors on these features. This review outlines various chemical synthetic strategies that have been applied to develop novel AMPs, including chemical modifications of existing peptides, semi-synthesis, and computer-aided design. We will also highlight novel AMP structures, including hybrids, antimicrobial dendrimers and polypeptides, peptidomimetics, and AMP-drug conjugates and consider recent developments in their chemical synthesis.

Characteristics and therapeutic applications of antimicrobial peptides

The demand for novel antimicrobial compounds is rapidly growing due to the phenomenon of antibiotic resistance in bacteria. In response, numerous alternative approaches are being taken including use of polymers, metals, combinatorial approaches, and antimicrobial peptides (AMPs). AMPs are a naturally occurring part of the immune system of all higher organisms and display remarkable broad-spectrum activity and high selectivity for bacterial cells over host cells. However, despite good activity and safety profiles, AMPs have struggled to find success in the clinic. In this review, we outline the fundamental properties of AMPs that make them effective antimicrobials and extend this into three main approaches being used to help AMPs become viable clinical options. These three approaches are the incorporation of non-natural amino acids into the AMP sequence to impart better pharmacological properties, the incorporation of AMPs in hydrogels, and the chemical modification of surfaces with AMPs for device applications. These approaches are being developed to enhance the biocompatibility, stability, and/or bioavailability of AMPs as clinical options.

Short Ligand, Cysteine-Modified Warnericin RK Antimicrobial Peptides Favor Highly Sensitive Detection of Legionella pneumophila

Culture-based methods for the detection of Legionella pneumophila are prohibitively slow and frequently inadequate. The problem has been addressed with biosensing technology that employs a variety of ligands for the specific capture of bacteria. However, the limited success of the application of mammalian antibodies, aptamers, and nucleic acid-based probes for sensitive biosensing has generated growing interest in exploring alternative biosensing architectures, such as those based on antimicrobial peptides (AMP) that are known for their attractive therapeutic applications. We report on the successful employment of cysteine-modified warnericin RK AMP for the operation of a highly sensitive biosensor of L. pneumophila based on digital photocorrosion of GaAs/AlGaAs nanoheterostructures. The replacement of the relatively cumbersome procedure commonly applied for the attachment of antibodies to COOH-terminated mercaptohexadecanoic acid self-assembled monolayers has allowed for a significant reduction in the distance at which bacteria are immobilized above the biosensor surface. An important consequence of this approach is the attractive limit of detection of L. pneumophila estimated at 2 × 102 CFU/mL. The target bacteria were captured four times more efficiently than P. fluorescens, B. subtilis, and E. coli, which is highly promising for environmental monitoring.

Effects of salts on the self-assembly behavior and antibacterial activity of a surfactant-like peptide

Self-assembling peptides have become one of the most promising antibacterial agents due to their superior properties, such as simple molecular composition, favorable assembly structures, and rich designability. For maximum application in vivo, their activities in the presence of salts are desirable, however, the potent correlation between peptide nanostructures, antibacterial activity, and salt resistance behavior remains poorly explored. Previously, we have demonstrated that the potent antibacterial activity of a designed surfactant-like peptide Ac-A9K-NH2 benefited from its high self-assembly ability and appropriate size of its self-assembled nanostructures. In this study, we investigated the effect of salts on its self-assembly behavior and antibacterial activity. The results indicated that the flexible and long nanofibrils formed by Ac-A9K-NH2 in the presence of CaCl2 were adverse to its membrane insertion, leading to the reduction of antibacterial activity. Comparatively, Ac-A9K-NH2 maintained its potent antibacterial activity in the presence of NaCl due to its suitable shape and size of nanostructures. The newly formed nanofibers and nanorods facilitated the penetration of peptides into the bacterial membrane, forming nanopores and eventually leading to the lysis of bacteria. The high antibacterial activity and NaCl tolerance of Ac-A9K-NH2 make it a promising antibacterial agent at elevated salt concentrations.

In silico identification and functional validation of linear cationic α-helical antimicrobial peptides in the ascidian Ciona intestinalis

We developed a computing method to identify linear cationic α-helical antimicrobial peptides (LCAMPs) in the genome of Ciona intestinalis based on its structural and physicochemical features. Using this method, 22 candidates of Ciona LCAMPs, including well-known antimicrobial peptides, were identified from 21,975 non-redundant amino acid sequences in Ciona genome database, Ghost database. We also experimentally confirmed the antimicrobial activities of five LCAMP candidates, and three of them were found to be active in the presence of 500 mM NaCl, nearly equivalent to the salt concentration of seawater. Membrane topology prediction suggested that salt resistance of Ciona LCAMPs might be influenced by hydrophobic interactions between the peptide and membrane. Further, we applied our method to Xenopus tropicalis genome and found 11 LCAMP candidates. Thus, our method may serve as an effective and powerful tool for searching LCAMPs that are difficult to find using conventional homology-based methods.

Antimicrobial Susceptibility Testing of Antimicrobial Peptides to Better Predict Efficacy

During the development of antimicrobial peptides (AMP) as potential therapeutics, antimicrobial susceptibility testing (AST) stands as an essential part of the process in identification and optimisation of candidate AMP. Standard methods for AST, developed almost 60 years ago for testing conventional antibiotics, are not necessarily fit for purpose when it comes to determining the susceptibility of microorganisms to AMP. Without careful consideration of the parameters comprising AST there is a risk of failing to identify novel antimicrobials at a time when antimicrobial resistance (AMR) is leading the planet toward a post-antibiotic era. More physiologically/clinically relevant AST will allow better determination of the preclinical activity of drug candidates and allow the identification of lead compounds. An important consideration is the efficacy of AMP in biological matrices replicating sites of infection, e.g., blood/plasma/serum, lung bronchiolar lavage fluid/sputum, urine, biofilms, etc., as this will likely be more predictive of clinical efficacy. Additionally, specific AST for different target microorganisms may help to better predict efficacy of AMP in specific infections. In this manuscript, we describe what we believe are the key considerations for AST of AMP and hope that this information can better guide the preclinical development of AMP toward becoming a new generation of urgently needed antimicrobials.

Four-day plaque regrowth evaluation of a peptide chewing gum in a double-blind randomized clinical trial

OBJECTIVE

Antimicrobial peptide, KSL-W, formulated as an antiplaque chewing gum (APCG), was tested to evaluate the dental plaque inhibition activity and safety in an IRB approved and FDA regulated 4-day plaque regrowth clinical study.

METHODS

This Phase 2 two-armed placebo-controlled, double blind, randomized (1:1), multiple dose, and single-center study was evaluated in a proof of concept for the APCG containing 30 mg antimicrobial peptide KSL-W. Twenty six generally healthy subjects were consented and randomized into the study. The subjects were administered a dose three times per day for four treatment days following a complete dental prophylaxis. Participants were prohibited from conducting oral hygiene care (teeth brushing, flossing, and/or mouth wash rinse) for the duration of the trial. Twelve to 16 hr prior to the baseline visit, the subjects were to abstain from oral hygiene care. The Quigley-Hein Turesky plaque index (QHT) score and the oral soft tissue clinical exams were obtained at both Day 0 and Day 4.

RESULTS

All randomized study subjects that received either APCG or placebo gum completed the study with no significant adverse events recorded. The APCG significantly inhibited the regrowth of dental plaque over the course of 4 days. The whole mouth data demonstrated a difference in the QHT between the APCG and the placebo gum of 1.14 (SE = 0.27) and 95% confidence bounds of 0.58, 1.70 with a two-tailed P value of .0003.

CONCLUSION

Considering the limited sample size, the proof of concept analysis in this Phase 2 study confirmed that APCG is effective against dental plaque formation and safe for human use. (ClinicalTrials.gov Study ID# NCT02864901).

Bacterial membrane permeability of antimicrobial polymethacrylates: Evidence for a complex mechanism from super-resolution fluorescence imaging

Amphiphilic polymers bearing cationic moieties are an emerging alternative to traditional antibiotics given their broad-spectrum activity and low susceptibility to the development of resistance. To date, however, much remains unclear regarding their mechanism of action. Using functional assays (ATP leakage, cell viability, DNA binding) and super-high resolution structured illumination microscopy (OMX-SR) of fluorescently tagged polymers, we present evidence for a complex mechanism, involving membrane permeation as well as cellular uptake, interaction with intracellular targets and possible complexation with bacterial DNA. STATEMENT OF SIGNIFICANCE: This manuscript details the first study to systematically and directly investigate the mechanism of action of antimicrobial polymers, using super-resolution fluorescence imaging as well as functional assays. While many in the field cite membrane permeation as the sole mechanism underlying the activity of such polymers, we present evidence for multimodal actions including high cellular uptake and interaction with intracellular targets. It is also the first report to show competitive binding of antimicrobial polymers with bacterial DNA in a dose-dependent manner.

Antimicrobial Peptides from Rat-Tailed Maggots of the Drone Fly Eristalis tenax Show Potent Activity against Multidrug-Resistant Gram-Negative Bacteria

The spread of multidrug-resistant Gram-negative bacteria is an increasing threat to human health, because novel compound classes for the development of antibiotics have not been discovered for decades. Antimicrobial peptides (AMPs) may provide a much-needed breakthrough because these immunity-related defense molecules protect many eukaryotes against Gram-negative pathogens. Recent concepts in evolutionary immunology predict the presence of potent AMPs in insects that have adapted to survive in habitats with extreme microbial contamination. For example, the saprophagous and coprophagous maggots of the drone fly Eristalis tenax (Diptera) can flourish in polluted aquatic habitats, such as sewage tanks and farmyard liquid manure storage pits. We used next-generation sequencing to screen the E. tenax immunity-related transcriptome for AMPs that are synthesized in response to the injection of bacterial lipopolysaccharide. We identified 22 AMPs and selected nine for larger-scale synthesis to test their activity against a broad spectrum of pathogens, including multidrug-resistant Gram-negative bacteria. Two cecropin-like peptides (EtCec1-a and EtCec2-a) and a diptericin-like peptide (EtDip) displayed strong activity against the pathogens, even under simulated physiological conditions, and also achieved a good therapeutic window. Therefore, these AMPs could be used as leads for the development of novel antibiotics.

Opossum Cathelicidins Exhibit Antimicrobial Activity Against a Broad Spectrum of Pathogens Including West Nile Virus

This study aimed to characterize cathelicidins from the gray short-tailed opossum in silico and experimentally validate their antimicrobial effects against various pathogenic bacteria and West Nile virus (WNV). Genome-wide in silico analysis against the current genome assembly of the gray short-tailed opossum yielded 56 classical antimicrobial peptides (AMPs) from eight different families, among which 19 cathelicidins, namely ModoCath1 – 19, were analyzed in silico to predict their antimicrobial domains and three of which, ModoCath1, -5, and -6, were further experimentally evaluated for their antimicrobial activity, and were found to exhibit a wide spectrum of antimicroial effects against a panel of gram-positive and gram-negative bacterial strains. In addition, these peptides displayed low-to-moderate cytotoxicity in mammalian cells as well as stability in serum and various salt and pH conditions. Circular dichroism analysis of the spectra resulting from interactions between ModoCaths and lipopolysaccharides (LPS) showed formation of a helical structure, while a dual-dye membrane disruption assay and scanning electron microscopy analysis revealed that ModoCaths exerted bactericidal effects by causing membrane damage. Furthermore, ModoCath5 displayed potent antiviral activity against WNV by inhibiting viral replication, suggesting that opossum cathelicidins may serve as potentially novel antimicrobial endogenous substances of mammalian origin, considering their large number. Moreover, analysis of publicly available RNA-seq data revealed the expression of eight ModoCaths from five different tissues, suggesting that gray short-tailed opossums may be an interesting source of cathelicidins with diverse characteristics.

A Whole-Cell Screen Identifies Small Bioactives That Synergize with Polymyxin and Exhibit Antimicrobial Activities against Multidrug-Resistant Bacteria

The threat of diminished antibiotic discovery has global health care in crisis. In the United States, it is estimated each year that over 2 million bacterial infections are resistant to first-line antibiotic treatments and cost in excess of 20 billion dollars. Many of these cases result from infection with the ESKAPE pathogens ( Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter species), which are multidrug-resistant bacteria that often cause community- and hospital-acquired infections in both healthy and immunocompromised patients. Physicians have turned to last-resort antibiotics like polymyxins to tackle these pathogens, and as a consequence, polymyxin resistance has emerged and is spreading. Barring the discovery of new antibiotics, another route to successfully mitigate polymyxin resistance is to identify compounds that can complement the existing arsenal of antibiotics. We recently designed and performed a large-scale robotic screen to identify 43 bioactive compounds that act synergistically with polymyxin B to inhibit the growth of polymyxin-resistant Escherichia coli Of these 43 compounds, 5 lead compounds were identified and characterized using various Gram-negative bacterial organisms to better assess their synergistic activity with polymyxin. Several of these compounds reduce polymyxin to an MIC of <2 μg/ml against polymyxin-resistant and polymyxin-heteroresistant Gram-negative pathogens. Likewise, four of these compounds exhibit antimicrobial activity against Gram-positive bacteria, one of which rapidly eradicated methicillin-resistant Staphylococcus aureus We present multiple first-generation (i.e., not yet optimized) compounds that warrant further investigation and optimization, since they can act both synergistically with polymyxin and also as lone antimicrobials for combating ESKAPE pathogens.

Hepatitis C Virus p7 Induces Membrane Permeabilization by Interacting with Phosphatidylserine

Hepatitis C virus (HCV) p7 is known to be a nonselective cation channel for HCV maturation. Because the interaction of HCV proteins with host lipids in the endoplasmic reticulum membrane is crucial for the budding process, the identification of p7–lipid interactions could be important for understanding the HCV life cycle. Here, we report that p7 interacts with phosphatidylserine (PS) to induce membrane permeabilization. The interaction of p7 with PS was not inhibited by Gd³⁺ ions, which have been known to interact with negatively charged lipids, but channel activity and p7-induced mitochondrial depolarization were inhibited by Gd³⁺ ions. From the present results, we suggest that the p7–PS interaction plays an essential role in regulating its ion channel function and could be a potential molecular target for anti-HCV therapy.

Short Cationic Peptidomimetic Antimicrobials

The rapid growth of antimicrobial resistance against several frontline antibiotics has encouraged scientists worldwide to develop new alternatives with unique mechanisms of action. Antimicrobial peptides (AMPs) have attracted considerable interest due to their rapid killing and broad-spectrum activity. Peptidomimetics overcome some of the obstacles of AMPs such as high cost of synthesis, short half-life in vivo due to their susceptibility to proteolytic degradation, and issues with toxicity. This review will examine the development of short cationic peptidomimetics as antimicrobials.

Salt-Tolerant Antifungal and Antibacterial Activities of the Corn Defensin ZmD32

Pathogenic microbes are developing resistance to established antibiotics, making the development of novel antimicrobial molecules paramount. One major resource for discovery of antimicrobials is the arsenal of innate immunity molecules that are part of the first line of pathogen defense in many organisms. Gene encoded cationic antimicrobial peptides are a major constituent of innate immune arsenals. Many of these peptides exhibit potent antimicrobial activity in vitro. However, a major hurdle that has impeded their development for use in the clinic is the loss of activity at physiological salt concentrations, attributed to weakening of the electrostatic interactions between the cationic peptide and anionic surfaces of the microbial cells in the presence of salt. Using plant defensins we have investigated the relationship between the charge of an antimicrobial peptide and its activity in media with elevated salt concentrations. Plant defensins are a large class of antifungal peptides that have remarkable stability at extremes of pH and temperature as well as resistance to protease digestion. A search of a database of over 1200 plant defensins identified ZmD32, a defensin from Zea mays, with a predicted charge of +10.1 at pH 7, the highest of any defensin in the database. Recombinant ZmD32 retained activity against a range of fungal species in media containing elevated concentrations of salt. In addition, ZmD32 was active against Candida albicans biofilms as well as both Gram negative and Gram-positive bacteria. This broad spectrum antimicrobial activity, combined with a low toxicity on human cells make ZmD32 an attractive lead for development of future antimicrobial molecules.

A β-defensin gene of Trachinotus ovatus might be involved in the antimicrobial and antiviral immune response

Defensins are a group of small cationic and cysteine-rich peptides that are important components of the innate immune system. However, studies on defensins in teleosts are very limited, particularly studies on defensin functions through in vivo assays. In this study, we cloned and identified one β-defensin (TroBD) the golden pompano, Trachinotus ovatus, and analyzed the functions of TroBD in both in vivo and in vitro assays. TroBD is composed of 63 amino acids and shares high sequence identities (27.27-98.41%) with known β-defensins of other teleosts. The protein has a signature motif of six conserved cysteine residues within the mature peptide. The expression of TroBD was most abundant in the head kidney and spleen and was significantly upregulated following infection by Vibrio harveyi and viral nervous necrosis virus (VNNV). Purified recombinant TroBD (rTroBD) inhibited the growth of V. harveyi, and its antimicrobial activity was influenced by salt concentration. TroBD was found to have a chemotactic effect on macrophages in vitro. The results of an in vivo study demonstrated that TroBD overexpression/knockdown in T. ovatus significantly reduced/increased bacterial colonization or viral copy numbers in tissues. Taken together, these results indicate that TroBD plays a significant role in both antibacterial and antiviral immunity and provide new avenues for protection against pathogen infection in the aquaculture industry.

Chemical and Biological Sensors for Food-Quality Monitoring and Smart Packaging

The growing interest in food quality and safety requires the development of sensitive and reliable methods of analysis as well as technology for freshness preservation and food quality. This review describes the status of chemical and biological sensors for food monitoring and smart packaging. Sensing designs and their analytical features for measuring freshness markers, allergens, pathogens, adulterants and toxicants are discussed with example of applications. Their potential implementation in smart packaging could facilitate food-status monitoring, reduce food waste, extend shelf-life, and improve overall food quality. However, most sensors are still in the development stage and need significant work before implementation in real-world applications. Issues like sensitivity, selectivity, robustness, and safety of the sensing materials due to potential contact or migration in food need to be established. The current development status of these technologies, along with a discussion of the challenges and opportunities for future research, are discussed.

Tryptophan-Rich and Proline-Rich Antimicrobial Peptides

Due to the increasing emergence of drug-resistant pathogenic microorganisms, there is a world-wide quest to develop new-generation antibiotics. Antimicrobial peptides (AMPs) are small peptides with a broad spectrum of antibiotic activities against bacteria, fungi, protozoa, viruses and sometimes exhibit cytotoxic activity toward cancer cells. As a part of the native host defense system, most AMPs target the membrane integrity of the microorganism, leading to cell death by lysis. These membrane lytic effects are often toxic to mammalian cells and restrict their systemic application. However, AMPs containing predominantly either tryptophan or proline can kill microorganisms by targeting intracellular pathways and are therefore a promising source of next-generation antibiotics. A minimum length of six amino acids is required for high antimicrobial activity in tryptophan-rich AMPs and the position of these residues also affects their antimicrobial activity. The aromatic side chain of tryptophan is able to rapidly form hydrogen bonds with membrane bilayer components. Proline-rich AMPs interact with the 70S ribosome and disrupt protein synthesis. In addition, they can also target the heat shock protein in target pathogens, and consequently lead to protein misfolding. In this review, we will focus on describing the structures, sources, and mechanisms of action of the aforementioned AMPs.

Discovery of Next-Generation Antimicrobials through Bacterial Self-Screening of Surface-Displayed Peptide Libraries

Peptides have great potential to combat antibiotic resistance. While many platforms can screen peptides for their ability to bind to target cells, there are virtually no platforms that directly assess the functionality of peptides. This limitation is exacerbated when identifying antimicrobial peptides because the phenotype, death, selects against itself and has caused a scientific bottleneck that confines research to a few naturally occurring classes of antimicrobial peptides. We have used this seeming dissonance to develop Surface Localized Antimicrobial Display (SLAY), a platform that allows screening of unlimited numbers of peptides of any length, composition, and structure in a single tube for antimicrobial activity. Using SLAY, we screened ∼800,000 random peptide sequences for antimicrobial function and identified thousands of active sequences, dramatically increasing the number of known antimicrobial sequences. SLAY hits present with different potential mechanisms of peptide action and access to areas of antimicrobial physicochemical space beyond what nature has evolved. VIDEO ABSTRACT.

Synergistic Activity between Two Antifungal Proteins, the Plant Defensin NaD1 and the Bovine Pancreatic Trypsin Inhibitor

This work describes the increased activity of a natural antifungal peptide in the presence of another antifungal peptide from a different family. This is termed antifungal synergy. Synergy is important for decreasing the amount of antifungal molecule needed to control the disease. Traditionally, naturally occurring antifungal molecules are assayed in isolation. Identification of synergistic interactions between antifungal peptides means that their activities in a complex biological system are likely to be different from what we observe when examining them individually. This study identified synergy between an antifungal peptide and a group of peptides that do not affect fungal growth in vitro. This provides the foundation for generation of transgenic plants with increased resistance to fungal disease and identification of antifungal accessory factors that enhance the activity of innate immune molecules but do not have an antifungal effect on their own.

Defensins are a large family of small, cationic, cysteine-rich proteins that are part of the defense arsenal that plants use for protection against potentially damaging fungal infections. The plant defensin NaD1 from Nicotiana alata is a potent antifungal protein that inhibits growth and kills a variety of fungal pathogens that affect both plant and animal (human) hosts. Some serine protease inhibitors have also been reported to be antifungal molecules, while others have no inhibitory activity against fungi. Here we describe the synergistic activity of the plant defensin NaD1 with a selection of serine protease inhibitors against the plant pathogens Fusarium graminearum and Colletotrichum graminicola and the animal pathogen Candida albicans. The synergistic activity was not related to the protease inhibitory activity of these molecules but may arise from activation of fungal stress response pathways. The bovine pancreatic trypsin inhibitor (BPTI) displayed the most synergy with NaD1. BPTI also acted synergistically with several other antifungal molecules. The observation that NaD1 acts synergistically with protease inhibitors provides the foundation for the design of transgenic plants with improved resistance to fungal disease. It also supports the possibility of naturally occurring accessory factors that function to enhance the activity of innate immunity peptides in biological systems.

IMPORTANCE This work describes the increased activity of a natural antifungal peptide in the presence of another antifungal peptide from a different family. This is termed antifungal synergy. Synergy is important for decreasing the amount of antifungal molecule needed to control the disease. Traditionally, naturally occurring antifungal molecules are assayed in isolation. Identification of synergistic interactions between antifungal peptides means that their activities in a complex biological system are likely to be different from what we observe when examining them individually. This study identified synergy between an antifungal peptide and a group of peptides that do not affect fungal growth in vitro. This provides the foundation for generation of transgenic plants with increased resistance to fungal disease and identification of antifungal accessory factors that enhance the activity of innate immune molecules but do not have an antifungal effect on their own.

Multifunctional Nanotechnology-Enabled Sensors for Rapid Capture and Detection of Pathogens

Nanomaterial-based sensing approaches that incorporate different types of nanoparticles (NPs) and nanostructures in conjunction with natural or synthetic receptors as molecular recognition elements provide opportunities for the design of sensitive and selective assays for rapid detection of contaminants. This review summarizes recent advancements over the past ten years in the development of nanotechnology-enabled sensors and systems for capture and detection of pathogens. The most common types of nanostructures and NPs, their modification with receptor molecules and integration to produce viable sensing systems with biorecognition, amplification and signal readout are discussed. Examples of all-in-one systems that combine multifunctional properties for capture, separation, inactivation and detection are also provided. Current trends in the development of low-cost instrumentation for rapid assessment of food contamination are discussed as well as challenges for practical implementation and directions for future research.

Evaluation of the Immunomodulatory Activity of the Chicken NK-Lysin-Derived Peptide cNK-2

Chicken NK-lysin (cNK-lysin), the chicken homologue of human granulysin, is a cationic amphiphilic antimicrobial peptide (AMP) that is produced by cytotoxic T cells and natural killer cells. We previously demonstrated that cNK-lysin and cNK-2, a synthetic peptide incorporating the core α-helical region of cNK-lysin, have antimicrobial activity against apicomplexan parasites such as Eimeria spp., via membrane disruption. In addition to the antimicrobial activity of AMPs, the immunomodulatory activity of AMPs mediated by their interactions with host cells is increasingly recognized. Thus, in this study, we investigated whether cNK-lysin derived peptides modulate the immune response in the chicken macrophage cell line HD11 and in chicken primary monocytes by evaluating the induction of chemokines, anti-inflammatory properties, and activation of signalling pathways. cNK-2 induced the expression of CCL4, CCL5 and interleukin(IL)-1β in HD11 cells and CCL4 and CCL5 in primary monocytes. We also determined that cNK-2 suppresses the lipopolysaccharide-induced inflammatory response by abrogating IL-1β expression. The immunomodulatory activity of cNK-2 involves the mitogen-activated protein kinases-mediated signalling pathway, including p38, extracellular signal-regulated kinase 1/2 and c-Jun N-terminal kinases, as well as the internalization of cNK-2 into the cells. These results indicate that cNK-2 is a potential novel immunomodulating agent rather than an antimicrobial agent.

Antimicrobial Peptides from Fruits and Their Potential Use as Biotechnological Tools-A Review and Outlook

Bacterial resistance is a major threat to plant crops, animals and human health, and over the years this situation has increasingly spread worldwide. Due to their many bioactive compounds, plants are promising sources of antimicrobial compounds that can potentially be used in the treatment of infections caused by microorganisms. As well as stem, flowers and leaves, fruits have an efficient defense mechanism against pests and pathogens, besides presenting nutritional and functional properties due to their multifunctional molecules. Among such compounds, the antimicrobial peptides (AMPs) feature different antimicrobials that are capable of disrupting the microbial membrane and of acting in binding to intra-cytoplasmic targets of microorganisms. They are therefore capable of controlling or halting the growth of microorganisms. In summary, this review describes the major classes of AMPs found in fruits, their possible use as biotechnological tools and prospects for the pharmaceutical industry and agribusiness.

High-Performance Liquid Chromatography and Mass Spectrometry-Based Design of Proteolytically Stable Antimicrobial Peptides

The emergence of multiresistant bacteria worldwide together with the shortage of effective antibiotics in the market emphasizes the need for the design and development of the promising agents for the treatment of superbug-associated infections. Antimicrobial peptides (AMPs) have been considered as excellent candidates to tackle this issue, and thousands of peptides of different lengths, amino acid compositions, and mode of action have been discovered and prepared to date. Nevertheless, it is of great importance to develop innovative formulation strategies for delivering these AMPs and to improve their low bioavailability and metabolic stability, particularly against proteases, if these peptides are to find applications in the clinic and administered orally or parenterally or used as dietary supplements. The purpose of this chapter is to describe basic experimental principles, based on analytical reversed-phase high-performance liquid chromatography (RP-HPLC) and mass spectrometry (MS), for the prospective design of orally bioavailable AMPs considering the structural characteristics of the peptides and the substrate specificity of proteases that abound in the body especially at sites of infection.

Design and characterization of short hybrid antimicrobial peptides from pEM-2, mastoparan-VT1, and mastoparan-B

Antimicrobial peptides are considered to be excellent templates for designing novel antibiotics because of their broad-spectrum antimicrobial activity and their low prognostic to induce antibiotic resistance. In this study, for the first time, a series of short hybrid antimicrobial peptides combined by different fragments of venom-derived alpha-helical antimicrobial peptides pEM-2, mastoparan-VT1, and mastoparan-B were designed with the intent to improve the therapeutic index of the parental peptides. Short hybrid antimicrobial peptides PV, derived from pEM-2 and mastoparan-VT1, was found to possess the highest antibacterial, hemolytic, and cytotoxic activity. Short hybrid antimicrobial peptides PV3, derived from pEM-2 and three fragments of mastoparan-VT1, showed more than threefold improvement in therapeutic index compared with parental peptides pEM-2 and mastoparan-VT1. PV had the highest antimicrobial activity in stability studies. Except BVP, designed based on all three parental peptides, the other short hybrid antimicrobial peptides at their minimal inhibitory concentration and 2× minimal inhibitory concentration required less than 120 and 60 min to reduce >3log10 the initial inoculum, respectively. All peptides had membrane-disrupting activity in a time-dependent manner. Collectively, this study highlights the potential for rational design of improved short hybrid antimicrobial peptides such as PV3 that was an ideal candidate for further assessment with the ultimate purpose of development of effective antimicrobial agents.

Bacterial membranes are the target for antimicrobial polysiloxane-methacrylate copolymer

Antibacterial polysiloxane polymers with pending tert-butylamine groups are a novel class of compounds that are compatible with silicone elastomers, but their mechanism of action is not well understood. The research into their action mechanism was conducted on a polysiloxane copolymer grafted with tert-butylaminoethyl methacrylate and covalently attached fluorescein. Fluorometric measurements results suggest that the polymer forms a stable link with bacteria. The results of β-galactosidase enzyme assay with the use of ortho-nitrophenyl-β-galactoside as a substrate show that the polymer has a damaging effect on bacterial membranes. The scanning and transmission electron micrographs of Escherichia coli cells incubated with the polymer prove further that the polymer's site of action is bacterial cell membranes. In order to investigate the polymer interaction with bacterial membranes the fluorescein labelled polymer was incubated with bacterial cells and membranes isolation and identification method was next applied. The E. coli membrane fractions were identified by light scattering, protein content, oxidase NADH activity and N-phenylnaphtylamine fluorescence measurements, as well as electron microscopy. Oxidase NADH and N-phenylnaphtylamine were the inner membrane markers. The bacterial membranes were then tested for the presence of the polymer. The experiments gave evidence that the copolymer binds to the inner bacterial membrane. Further studies, where the copolymer was incubated with isolated mixed (inner and outer) membrane fractions, proved that the copolymer exerts more destructive effect on E. coli outer membrane. The damaging effect on the membranes is concentration dependent.

Antifungal Activity and Action Mechanism of Histatin 5-Halocidin Hybrid Peptides against Candida ssp

The candidacidal activity of histatin 5 is initiated through cell wall binding, followed by translocation and intracellular targeting, while the halocidin peptide exerts its activity by attacking the Candida cell membrane. To improve antimicrobial activities and to understand the killing mechanism of two peptides, six hybrid peptides were designed by conjugating histatin 5 and halocidin. A comparative approach was established to study the activity, salt tolerance, cell wall glucan binding assay, cytotoxicity, generation of ROS and killing kinetics. CD spectrometry was conducted to evaluate secondary structures of these hybrid peptides. Furthermore the cellular localization of hybrid peptides was investigated by confocal fluorescence microscopy. Of the six hybrid congeners, di-PH2, di-WP2 and HHP1 had stronger activities than other hybrid peptides against all tested Candida strains. The MIC values of these peptides were 1–2, 2–4 and 2–4 μg/ml, respectively. Moreover, none of the hybrid peptides was cytotoxic in the hemolytic assay and cell-based cytotoxicity assay. Confocal laser microscopy showed that di-PH2 and HHP1 were translocated into cytoplasm whereas di-WP2 was accumulated on surface of C. albicans to exert their candidacidal activity. All translocated peptides (Hst 5, P113, di-PH2) were capable of generating intracellular ROS except HHP1. Additionally, the KFH residues at C-terminal end of these peptides were assumed for core sequence for active translocation.