Submicronic fungal bioaerosols: high-resolution microscopic characterization and quantification

Innate and Adaptive Immune Responses Induced by Aspergillus fumigatus Conidia and Hyphae

Previous research indicated that hyphae of Aspergillus fumigatus (A. fumigatus) rather than conidia could successfully build a pulmonary aspergillosis model in immunocompetent mice. In this study, we compared the immune responses induced by hyphae and conidia to explore the possible mechanism of this striking phenomenon. Herein, a novel method was designed and adopted to quantify hyphal fragments. Murine macrophages RAW264.7 and human peripheral blood mononuclear cells were stimulated by A. fumigatus hyphae and conidia in vitro, respectively, and then immunological reactions were measured. Male C57BL/6 mice were challenged with conidia and hyphae through intratracheal inoculation. Dynamic conditions of mice were recorded, and RNA-seq measured corresponding immune responses. The results of the study confirmed that hyphae could induce more intensive inflammation than conidia in vitro and in vivo. However, macrophages revealed a higher production of ROS and M1 polarisation in response to conidia stimuli. Additionally, conidia could promote Th1 cell differentiation, while hyphae could increase the CD4/CD8 ratio. RNA-seq validated the fact that those multiple immunologically relevant pathways were more strongly activated by hyphae than conidia, which also promoted Th2 cell differentiation and suppressed Th1 signalling. Both hyphae and conidia could activate Th17 signalling. In general, conidia and hyphae induced distinctly different host immune responses, and the immune responses induced by conidia played a better protective effect. Therefore, the unique function of hyphae in the spread and infection of Aspergillus should be emphasised, and more research is required to clarify the underlying mechanisms for better understanding and management of aspergillosis.

Size-Resolved Community Structure of Bacteria and Fungi Transported by Dust in the Middle East

The atmosphere plays an important role in transporting microorganisms on a global scale, yet the processes affecting the composition of the airborne microbiome, the aerobiome, are not fully outlined. Here we present the community compositions of bacteria and fungi obtained by DNA amplicon-sequencing of aerosol samples collected in a size-resolved manner during nine consecutive days in central Israel. The campaign captured dust events originating from the Sahara and the Arabian deserts, as well as days without dust ("clear days"). We found that the source of the aerosol was the main variable contributing to the composition of both fungal and bacterial communities. Significant differences were also observed between communities representing particles of different sizes. We show evidence for the significant transport of bacteria as cell-aggregates and/or via bacterial attachment to particles during dust events. Our findings further point to the mixing of local and transported bacterial communities, observed mostly in particles smaller than 0.6 μm in diameter, representing bacterial single cells. Fungal communities showed the highest dependence on the source of the aerosols, along with significant daily variability, and without significant mixing between sources, possibly due to their larger aerodynamic size and shorter atmospheric residence times. These results, obtained under highly varied atmospheric conditions, provide significant assurances to previously raised hypotheses and could set the course for future studies on aerobiome composition.

Bioaerosol Exposure and in vitro Activation of Toll-like Receptors in a Norwegian Waste Sorting Plant

Background

The global shift toward greener societies demands new technologies and work operations in the waste-management sector. However, progressive industrial methods do not necessarily consider workers’ health. This study characterized workers' exposure to bioaerosols and investigated the bioaerosols’ potential to engage the immune system in vitro.

Methods

Full shift personal aerosol sampling was conducted over three consecutive days. Dust load was analyzed by gravimetry, fungal and actinobacterial spores were analyzed by scanning electron microscopy, and endotoxin by limulus amebocyte lysate (LAL) assay. In vitro exposure of HEK cells to airborne dust samples was used to investigate the potential of inducing an inflammatory reaction.

Results

The total dust exposure level exceeded the recommended occupational exposure limit (OEL) of 5.0 mg/m³ in 3 out of 15 samples. The inhalable endotoxin level exceeded the recommended exposure level by a 7-fold, whereas the fungal spore level exceeded the recommended exposure level by an 11-fold. Actinobacterial spores were identified in 8 out of 14 samples. In vitro experiments revealed significant TLR2 activation in 9 out of 14 samples vs. significant TLR4 activation in all samples.

Conclusion

The present study showed that the dust samples contained potentially health-impairing endotoxin, fungi, and actinobacterial levels. Furthermore, the sampled dust contained microbial components capable of inducing TLR activation and thus have the potential to evoke an inflammatory response in exposed individuals.

Toxicity studies of Aspergillus fumigatus administered by inhalation to B6C3F1/N mice (revised)

Aspergillus fumigatus is a thermotolerant, soil-borne fungal species that is ubiquitous in the environment. Mold was nominated to the National Toxicology Program (NTP) by a private individual due to suspected adverse health effects associated with personal exposure in indoor and occupational settings. A. fumigatus is of particular concern in the biowaste industry as the species can contaminate self-heating compost piles. Because of this potential for personal and occupational exposure and the lack of available toxicity data, toxicity studies were conducted in which male and female B6C3F1/N mice were exposed to A. fumigatus conidia (spores) two times a week for 3 months. All in-life procedures, including inhalation exposure, test article preparation, and hematology analysis, were completed by the National Institute for Occupational Safety and Health (NIOSH, Morgantown, WV). Battelle (Columbus, OH) conducted terminal necropsies, measured terminal body and organ weights, and evaluated gross lesions on-site at NIOSH. Tissue processing and histopathology were completed at Battelle. Grocott's methenamine silver (GMS) staining was performed at NIOSH. Genetic toxicology studies on mouse peripheral blood erythrocytes were conducted by Integrated Laboratory Systems, LLC (Research Triangle Park, NC). (Abstract Abridged).

LC-MS based identification of stylosin and tschimgine from fungal endophytes associated with Ferula ovina

Objectives

Ferula ovina is an Iranian medicinal plant. Tschimgine and stylosin are two of its major monoterpene derivatives. In this study, we proceeded to investigate some fungal endophytes from F. ovina that can produce plant secondary metabolites.

Materials and Methods

The isolated endophytic fungi were fermented in potato dextrose broth (PDB) medium and their extracts were screened for the presence of the plant compounds by liquid chromatography-tandem mass spectrometry (LC-MS). Endophytes identification was performed by morphological and molecular methods. Three markers (ITS, LSU, and TEF1) were used for accurate molecular identification.

Results

Forty isolates from 9 different genera of endophytic fungi were identified, of which two recently reported species of O. ferulica and Pithoascus persicus were able to produce tschimgine and stylosin.

Conclusion

These fungi can be used as a substitute for the production of plant's medicinal compounds independent of wild populations of the source plant.

Characterization and pro-inflammatory potential of indoor mold particles

A number of epidemiological studies find an association between indoor air dampness and respiratory health effects. This is often suggested to be linked to enhanced mold growth. However, the role of mold is obviously difficult to disentangle from other dampness-related exposure including microbes as well as non-biological particles and chemical pollutants. The association may partly be due to visible mycelial growth and a characteristic musty smell of mold. Thus, the potential role of mold exposure should be further explored by evaluating information from experimental studies elucidating possible mechanistic links. Such studies show that exposure to spores and hyphal fragments may act as allergens and pro-inflammatory mediators and that they may damage airways by the production of toxins, enzymes, and volatile organic compounds. In the present review, we hypothesize that continuous exposure to mold particles may result in chronic low-grade pro-inflammatory responses contributing to respiratory diseases. We summarize some of the main methods for detection and characterization of fungal aerosols and highlight in vitro research elucidating how molds may induce toxicity and pro-inflammatory reactions in human cell models relevant for airway exposure. Data suggest that the fraction of fungal hyphal fragments in indoor air is much higher than that of airborne spores, and the hyphal fragments often have a higher pro-inflammatory potential. Thus, hyphal fragments of prevalent mold species with strong pro-inflammatory potential may be particularly relevant candidates for respiratory diseases associated with damp/mold-contaminated indoor air. Future studies linking of indoor air dampness with health effects should assess the toxicity and pro-inflammatory potential of indoor air particulate matter and combined this information with a better characterization of biological components including hyphal fragments from both pathogenic and non-pathogenic mold species. Such studies may increase our understanding of the potential role of mold exposure.

Overview of primary biological aerosol particles from a Chinese boreal forest: Insight into morphology, size, and mixing state at microscopic scale

Biological aerosols play an important role in atmospheric chemistry, clouds, climate, and public health. Here, we studied the morphology and composition of primary biological aerosol particles (PBAPs) collected in the Lesser Khingan Mountain boreal forest of China in summertime using transmission electron microscopy (TEM) and scanning electron microscopy (SEM). C, N, O, P, K, and Si were detected in most of the PBAPs, and P represented a major marker to discriminate the PBAPs. Of all detected particles >100 nm in diameter, 13% by number were identified as PBAPs. We found that one type of PBAPs mostly appeared as similar rod-like shapes with an aspect ratio > 1.5. Size distribution of the rod-like PBAPs displays two typical peaks at 1.4 μm and 3.5 μm, which likely are bacteria and fungal particles. The second most PBAPs were identified as fungal spores with ovoid, sub-globular or elongated shapes with a smooth surface and small protuberances with their dominant size range of 2-5 μm. Moreover, we found some large brochosomal clusters containing hundreds of brochosomes with a size range of 200-700 nm and a shape like a truncated icosahedron. We estimated that mass concentration of PBAPs approximately 1.9 μg m^-3 and contributed 47% of the in situ PM_2.5-10 mass. The detection frequency and concentration of PBAPs were higher at night than in the daytime, suggesting that the relative humidity dramatically enhanced the PBAPs emissions in the boreal forest. Our study also showed that the fresh PBAPs displayed weak hygroscopicity with a growth factor of ~1.09 at RH = 94%. TEM analysis revealed that about 20% of the rod-like PBAPs were internally mixed with metal, mineral dust, and inorganic salts in the boreal forest air. This work for the first time provides the overview of individual PBAPs from nanoscale to microscale in Chinese boreal forest air.

Particle size distribution of the major Alternaria alternata allergen, Alt a 1, derived from airborne spores and subspore fragments

Fungal fragments are abundant immunoreactive bioaerosols that may outnumber the concentrations of intact spores in the air. To investigate the importance of Alternaria fragments as sources of allergens compared to Alternaria spores, we determined the levels of Alternaria spores and Alt a 1 (the major allergen in Alternaria alternata spores) collected on filters within three fractions of particulate matter (PM) of different aerodynamic diameter: (1) PM_>10, (diameter>10 μm); (2) PM_2.5-10 (2.5-10μm); (3) PM_2.5 (0.12-2.5 μm). The airborne particles were collected using a three stage high-volume ChemVol cascade impactor during the Alternaria sporulation season in Poznań, Poland (30 d between 6 July and 22 September 2016). The quantification of Alt a 1 was performed using the enzyme-linked immunosorbent assay. High concentrations of Alt a 1 were recorded during warm and dry d characterized by high sunshine duration, lack of clouds and high dew point values. Atmospheric concentrations of Alternaria spores correlated significantly (r = 0.930, p < 0.001) with Alt a 1 levels. The highest Alt a 1 was recorded in PM_2.5-10 (66.8 % of total Alt a 1), while the lowest in PM_2.5 (<1.0 %). Significantly more Alt a 1 per spore (>30 %) was observed in PM_2.5-10 than in PM_>10. This Alt a 1 excess may be derived from sources other than spores, e.g. hyphal fragments. Overall, in outdoor air the major source of Alt a 1 are intact Alternaria spores, but the impact of other fungal fragments (hyphal parts, broken spores, conidiophores) cannot be neglected, as they may increase the total atmospheric Alt a 1 concentration.

Ten questions concerning the implications of carpet on indoor chemistry and microbiology

Carpet and rugs currently represent about half of the United States flooring market and offer many benefits as a flooring type. How carpets influence our exposure to both microorganisms and chemicals in indoor environments has important health implications but is not well understood. The goal of this manuscript is to consolidate what is known about how carpet impacts indoor chemistry and microbiology, as well as to identify the important research gaps that remain. After describing the current use of carpet indoors, questions focus on five specific areas: 1) indoor chemistry, 2) indoor microbiology, 3) resuspension and exposure, 4) current practices and future needs, and 5) sustainability. Overall, it is clear that carpet can influence our exposures to particles and volatile compounds in the indoor environment by acting as a direct source, as a reservoir of environmental contaminants, and as a surface supporting chemical and biological transformations. However, the health implications of these processes are not well known, nor how cleaning practices could be optimized to minimize potential negative impacts. Current standards and recommendations focus largely on carpets as a primary source of chemicals and on limiting moisture that would support microbial growth. Future research should consider enhancing knowledge related to the impact of carpet in the indoor environment and how we might improve the design and maintenance of this common material to reduce our exposure to harmful contaminants while retaining the benefits to consumers.

Fungal Fragments and Fungal Aerosol Composition in Sawmills

Assessment of exposure to fungi has commonly been limited to fungal spore measurements that have shown associations between fungi and development or exacerbation of different airway diseases. Because large numbers of submicronic fragments can be aerosolized from fungal cultures under laboratory conditions, it has been suggested that fungal exposure is more complex and higher than that commonly revealed by spore measurements. However, the assessment of fungal fragments in complex environmental matrix remain limited due to methodological challenges. With a recently developed immunolabeling method for field emission scanning electron microscope (FESEM), we could assess the complex composition of fungal aerosols present in personal thoracic samples collected from two Norwegian sawmills. We found that large fungal fragments (length >1 µm) dominated the fungal aerosols indicating that the traditional monitoring approach of spores severely underestimate fungal exposure. The composition of fungal aerosols comprised in average 9% submicronic fragments, 62% large fragments, and 29% spores. The average concentrations of large and submicronic fragments (0.2–1 µm) were 3 × 10⁵ and 0.6 × 10⁵ particles m⁻³, respectively, and correlated weakly with spores (1.4 × 10⁵ particles m⁻³). The levels of fragments were 2.6 times higher than the average spore concentration that was close to the proposed hazardous level of 10⁵ spores per m³. The season influenced significantly the fungal aerosol concentrations but not the composition. Furthermore, the ratio of spores in the heterogeneous fungal aerosol composition was significantly higher in saw departments as compared to sorting of green timber departments where the fungal fragments were most prevalent. Being the dominating particles of fungal aerosols in sawmills, fungal fragments should be included in exposure-response studies to elucidate their importance for health impairments. Likewise, the use of fungal aerosol composition in such studies should be considered.

Pro-inflammatory responses induced by A. fumigatus and A. versicolor in various human macrophage models

Exposure to mold-contaminated indoor air has been associated with various respiratory diseases, and there is a need for experimental data to confirm these associations. The pro-inflammatory properties of well-characterized aerosolized spores and hyphal fragments from Aspergillus fumigatus and Aspergillus versicolor were examined and compared using various human macrophage cell models including phorbol 12-myristate 13-acetate (PMA)-differentiated THP-1 macrophages (THP-1 Ma), primary peripheral blood monocyte-derived macrophages (MDM), and primary airway macrophages (AM) from induced sputum. X-ray treated samples of the two mold species induced different responses with A. fumigatus displaying the most potent induction of pro-inflammatory responses. While hyphal fragments from A. fumigatus were more potent than spores, similar responses were produced by the two growth stages of A. versicolor. THP-1 Ma was the most sensitive model releasing a broad range of cytokines/chemokines. MDM exhibited a similar cytokine/chemokine profile as THP-1 Ma, except for a low-quantity release of interleukin-1β (IL-1β). In contrast, AM appeared to be nonresponsive and yielded a different pattern of pro-inflammatory markers. Toll-like receptor (TLR)4, but also to a certain degree TLR2, was involved in several responses induced by spores and aerosolized hyphal fragments of A. fumigatus in MDM. Taken together, MDM seems to be the most promising experimental macrophage model. Abbreviations: AF: A. fumigatus, Aspergillus fumigatus; AV: A. versicolor, Aspergillus versicolor; AM: Airway Macrophage; CBA: Cytometric Bead Array; CD: Cluster of Differentiation; DTT: dithiothreitol; ELISA: Enzyme Linked Immunosorbent Assay; FBS: fetal bovine serum; GM-CSF: Granulocyte macrophage colony-stimulating factor; IL-1β: Interleukin-1beta; MDM: Monocyte-Derived Macrophages; NF-κB: Nuclear Factor kappa light chain enhancer of activated B cells; NLR: NOD-like Receptor; PAMP: Pathogen Associated Molecular Pattern; PMA: Phorbol 12-myristate 13-acetate; PRR: Pattern Recognition Receptor; THP-1: Human leukemia monocyte cell line; TLR: Toll-like Receptor; TNF-α: Tumor Necrosis Factor- alpha.

Pro-Inflammatory Responses in Human Bronchial Epithelial Cells Induced by Spores and Hyphal Fragments of Common Damp Indoor Molds

Damp indoor environments contaminated with different mold species may contribute to the development and exacerbation of respiratory illnesses. Human bronchial epithelial BEAS-2B cells were exposed to X-ray treated spores and hyphal fragments from pure cultures of Aspergillus fumigatus, Penicillum chrysogenum, Aspergillus versicolor and Stachybotrys chartarum. Hyphal fragments of A. fumigatus and P. chrysogenum induced expression and release of the pro-inflammatory cytokine interleukin (IL)-6 and the chemokine IL-8, while none of the other hyphal preparations had effects. Hyphal fragments from A. fumigatus and P. chrysogenum also increased the expression of IL-1α, IL-1β and tumor necrosis factor (TNF)-α, but these cytokines were not released. X-ray treated spores had little or no inflammatory potential. Attenuating Toll-like receptor (TLR)-2 by blocking antibodies strongly reduced the A. fumigatus and P. chrysogenum hyphae-induced IL-6 and IL-8 release, whereas TLR4 antagonist treatment was without effects. Untreated A. fumigatus spores formed hyphae and triggered expression of pro-inflammatory genes with similarities to the effects of hyphal fragments. In conclusion, while X-ray treated spores induced no pro-inflammatory responses, hyphal fragments of A. fumigatus and P. chrysogenum enhanced a TLR2-dependent expression and release of IL-6 and IL-8.

Characterization and pro-inflammatory responses of spore and hyphae samples from various mold species

Mold particles from Aspergillus fumigatus, Penicillium chrysogenum, Aspergillus versicolor, and Stachybotrys chartarum have been linked to respiratory-related diseases. We characterized X-ray-inactivated spores and hyphae fragments from these species by number of particles, morphology, and mycotoxin, β-glucan and protease content/activity. The pro-inflammatory properties of mold particles were examined in human bronchial epithelial cells (BEAS-2B) and THP-1 monocytes and phorbol 12-myristate 13-acetate (PMA)-differentiated THP-1. Spores from P. chrysogenum and S. chartarum contained some hyphae fragments, whereas the other preparations contained either spores or hyphae. Each mold species produced mainly one gelatin-degrading protease that was either of the metallo- or serine type, while one remains unclassified. Mycotoxin levels were generally low. Detectable levels of β-glucans were found mainly in hyphae particle preparations. PMA-differentiated THP-1 macrophages were by far the most sensitive model with effects in the order of 10 ng/cm² . Hyphae preparations of A. fumigatus and P. chrysogenum were more potent than respective spore preparations, whereas the opposite seems to be true for A. versicolor and S. chartarum. Hyphae fragments of A. fumigatus, P. chrysogenum, and A. versicolor enhanced the release of metalloprotease (proMMP-9) most markedly. In conclusion, species, growth stage, and characteristics are all important factors for pro-inflammatory potential.

Aerosolization of Mycotoxins after Growth of Toxinogenic Fungi on Wallpaper

Many fungi can develop on building material in indoor environments if the moisture level is high enough. Among species that are frequently observed, some are known to be potent mycotoxin producers. This presence of toxinogenic fungi in indoor environments raises the question of the possible exposure of occupants to these toxic compounds by inhalation after aerosolization. This study investigated mycotoxin production by Penicillium brevicompactum, Aspergillus versicolor, and Stachybotrys chartarum during their growth on wallpaper and the possible subsequent aerosolization of produced mycotoxins from contaminated substrates. We demonstrated that mycophenolic acid, sterigmatocystin, and macrocyclic trichothecenes (sum of 4 major compounds) could be produced at levels of 1.8, 112.1, and 27.8 mg/m², respectively, on wallpaper. Moreover, part of the produced toxins could be aerosolized from the substrate. The propensity for aerosolization differed according to the fungal species. Thus, particles were aerosolized from wallpaper contaminated with P. brevicompactum when an air velocity of just 0.3 m/s was applied, whereas S. chartarum required an air velocity of 5.9 m/s. A. versicolor was intermediate, since aerosolization occurred under an air velocity of 2 m/s. Quantification of the toxic content revealed that toxic load was mostly associated with particles of size ≥3 μm, which may correspond to spores. However, some macrocyclic trichothecenes (especially satratoxin H and verrucarin J) can also be found on smaller particles that can deeply penetrate the respiratory tract upon inhalation. These elements are important for risk assessment related to moldy environments.IMPORTANCE The possible colonization of building material by toxinogenic fungi in cases of moistening raises the question of the subsequent exposure of occupants to aerosolized mycotoxins. In this study, we demonstrated that three different toxinogenic species produce mycotoxins during their development on wallpaper. These toxins can subsequently be aerosolized, at least partly, from moldy material. This transfer to air requires air velocities that can be encountered under real-life conditions in buildings. Most of the aerosolized toxic load is found in particles whose size corresponds to spores or mycelium fragments. However, some toxins were also found on particles smaller than spores that are easily respirable and can deeply penetrate the human respiratory tract. All of these data are important for risk assessment related to fungal contamination of indoor environments.

Generation and Characterization of Indoor Fungal Aerosols for Inhalation Studies

In the indoor environment, people are exposed to several fungal species. Evident dampness is associated with increased respiratory symptoms. To examine the immune responses associated with fungal exposure, mice are often exposed to a single species grown on an agar medium. The aim of this study was to develop an inhalation exposure system to be able to examine responses in mice exposed to mixed fungal species aerosolized from fungus-infested building materials. Indoor airborne fungi were sampled and cultivated on gypsum boards. Aerosols were characterized and compared with aerosols in homes. Aerosols containing 10⁷ CFU of fungi/m³ air were generated repeatedly from fungus-infested gypsum boards in a mouse exposure chamber. Aerosols contained Aspergillus nidulans, Aspergillus niger, Aspergillus ustus, Aspergillus versicolor, Chaetomium globosum, Cladosporiumherbarum, Penicillium brevicompactum, Penicillium camemberti, Penicillium chrysogenum, Penicillium commune, Penicillium glabrum, Penicillium olsonii, Penicillium rugulosum, Stachybotrys chartarum, and Wallemia sebi. They were all among the most abundant airborne species identified in 28 homes. Nine species from gypsum boards and 11 species in the homes are associated with water damage. Most fungi were present as single spores, but chains and clusters of different species and fragments were also present. The variation in exposure level during the 60 min of aerosol generation was similar to the variation measured in homes. Through aerosolization of fungi from the indoor environment, cultured on gypsum boards, it was possible to generate realistic aerosols in terms of species composition, concentration, and particle sizes. The inhalation-exposure system can be used to study responses to indoor fungi associated with water damage and the importance of fungal species composition.

Release and characteristics of fungal fragments in various conditions

Intact spores and submicrometer size fragments are released from moldy building materials during growth and sporulation. It is unclear whether all fragments originate from fungal growth or if small pieces of building materials are also aerosolized as a result of microbial decomposition. In addition, particles may be formed through nucleation from secondary metabolites of fungi, such as microbial volatile organic compounds (MVOCs). In this study, we used the elemental composition of particles to characterize the origin of submicrometer fragments released from materials contaminated by fungi. Particles from three fungal species (Aspergillus versicolor, Cladosporium cladosporioides and Penicillium brevicompactum), grown on agar, wood and gypsum board were aerosolized using the Fungal Spore Source Strength Tester (FSSST) at three air velocities (5, 16 and 27 m/s). Released spores (optical size, dp ≥ 0.8 μm) and fragments (dp ≤ 0.8 μm) were counted using direct-reading optical aerosol instruments. Particles were also collected on filters, and their morphology and elemental composition analyzed using scanning electron microscopes (SEMs) coupled with an Energy-Dispersive X-ray spectroscopy (EDX). Among the studied factors, air velocity resulted in the most consistent trends in the release of fungal particles. Total concentrations of both fragments and spores increased with an increase in air velocity for all species whereas fragment-spore (F/S) ratios decreased. EDX analysis showed common elements, such as C, O, Mg and Ca, for blank material samples and fungal growth. However, N and P were exclusive to the fungal growth, and therefore were used to differentiate biological fragments from non-biological ones. Our results indicated that majority of fragments contained N and P. Because we observed increased release of fragments with increased air velocities, nucleation of MVOCs was likely not a relevant process in the formation of fungal fragments. Based on elemental composition, most fragments originated from fungi, but also fragments from growth material were detected.

Profile and Morphology of Fungal Aerosols Characterized by Field Emission Scanning Electron Microscopy (FESEM)

Fungal aerosols consist of spores and fragments with diverse array of morphologies; however, the size, shape, and origin of the constituents require further characterization. In this study, we characterize the profile of aerosols generated from Aspergillus fumigatus, A. versicolor, and Penicillium chrysogenum grown for 8 weeks on gypsum boards. Fungal particles were aerosolized at 12 and 20 L min^-1 using the Fungal Spore Source Strength Tester (FSSST) and the Stami particle generator (SPG). Collected particles were analyzed with field emission scanning electron microscopy (FESEM). We observed spore particle fraction consisting of single spores and spore aggregates in four size categories, and a fragment fraction that contained submicronic fragments and three size categories of larger fragments. Single spores dominated the aerosols from A. fumigatus (median: 53%), while the submicronic fragment fraction was the highest in the aerosols collected from A. versicolor (median: 34%) and P. chrysogenum (median: 31%). Morphological characteristics showed near spherical particles that were only single spores, oblong particles that comprise some spore aggregates and fragments (<3.5 μm), and fiber-like particles that regroup chained spore aggregates and fragments (>3.5 μm). Further, the near spherical particles dominated the aerosols from A. fumigatus (median: 53%), while oblong particles were dominant in the aerosols from A. versicolor (68%) and P. chrysogenum (55%). Fiber-like particles represented 21% and 24% of the aerosols from A. versicolor and P. chrysogenum, respectively. This study shows that fungal particles of various size, shape, and origin are aerosolized, and supports the need to include a broader range of particle types in fungal exposure assessment.