Determination of pyrimidine dimers in Escherichia coli and Cryptosporidium parvum during UV light inactivation, photoreactivation, and dark repair

Accumulation of antibiotics in the environment: Have appropriate measures been taken to protect Canadian human and ecological health?

In Canada, every day, contaminants of emerging concern (CEC) are discharged from waste treatment facilities into freshwaters. CECs such as pharmaceutical active compounds (PhACs), personal care products (PCPs), per- and polyfluoroalkyl substances (PFAS), and microplastics are legally discharged from sewage treatment plants (STPs), water reclamation plants (WRPs), hospital wastewater treatment plants (HWWTPs), or other forms of wastewater treatment facilities (WWTFs). In 2006, the Government of Canada established the Chemicals Management Plan (CMP) to classify chemicals based on a risk-priority assessment, which ranked many CECs such as PhACs as being of low urgency, therefore permitting these substances to continue being released into the environment at unmonitored rates. The problem with ranking PhACs as a low priority is that CMP's risk management assessment overlooks the long-term environmental and synergistic effects of PhAC accumulation, such as the long-term risk of antibiotic CEC accumulation in the spread of antibiotic resistance genes. The goal of this review is to specifically investigate antibiotic CEC accumulation and associated environmental risks to human and environmental health, as well as to determine whether appropriate legislative strategies are in place within Canada's governance framework. In this research, secondary data on antibiotic CEC levels in Canadian and international wastewaters, their potential to promote antibiotic-resistant residues, associated environmental short- and long-term risks, and synergistic effects were all considered. Unlike similar past reviews, this review employed an interdisciplinary approach to propose new strategies from the perspectives of science, engineering, and law.

Effect of dissolved organic matter on bacterial regrowth and response after ultraviolet disinfection

The effect of dissolved organic matter (DOM) on bacterial regrowth in water after disinfection using ultraviolet (UV) light emitting diodes (UVLEDs) is still unclear. Herein, the regrowth and responses of Vibrio parahaemolyticus and Bacillus cereus were investigated after being exposed to UVLEDs at combined wavelengths (265 and 280 nm) in a phosphate-buffered saline consisting of Suwannee River natural organic matter (SRNOM) and Suwannee River fulvic acid (SRFA). Low-molecular-weight (MW) organic compounds, which may form into intermediary photoproducts, and indicate bacterial repair metabolism, were characterized through non-target screening using orbitrap mass spectrometry. This study demonstrates the ability of the UVLEDs-inactivated cells to regrow. After UV exposure, a considerable upregulation of RecA was observed in two strains. With increasing the incubation time, the expression levels of RecA in V. parahaemolyticus increased, which may be attributed to the dark repair mechanism. Coexisting anionic DOM affects both the disinfection and bacterial regrowth processes. The time required for bacterial regrowth after UV exposure reflects the time needed for the individual cells to reactivate, and it differs in the presence or absence of DOM. In the presence of DOM, the cells were less damaged and required less time to grow. The UVLEDs exposure results in the occurrence of low-MW organic compounds, including carnitine or acryl-carnitine with N-acetylmuramic acid, which are associated with bacterial repair metabolism. Overall, the results of this study expand the understanding of the effects of water matrices on bacterial health risks. This can aid in the development of more effective strategies for water disinfection.

Suppression of photoreactivation of E. coli by excimer far-UV light (222 nm) via damage to multiple targets

Low-pressure mercury lamps emitting at 254 nm (UV254) are used widely for disinfection. However, subsequent exposure to visible light results in photoreactivation of treated bacteria. This study employed a krypton chloride excimer lamp emitting at 222 nm (UV222) to inactivate E. coli. UV222 and UV254 treatment had similar E. coli-inactivation kinetics. Upon subsequent irradiation with visible light, E. coli inactivated by UV254 was reactivated from 2.71-log to 4.75-log, whereas E. coli inactivated by UV222 showed negligible photoreactivation. UV222 treatment irreversibly broke DNA strands in the bacterium, whereas UV254 treatment primarily formed nucleobase dimers. Additionally, UV222 treatment caused cell membrane damage, resulting in wizened, pitted cells and permeability changes. The damage to the cell membrane was mainly due to the photolysis of proteins and lipids by UV222. Furthermore, the photolysis of proteins by UV222 destroyed enzymes, which blocked photoreactivation and dark repair. The multiple damages can be further evidenced by 4.0-61.1 times higher quantum yield in the photolysis of nucleobases and amino acids for UV222 than UV254. This study demonstrates that UV222 treatment damages multiple sites in bacteria, leading to their inactivation. Employing UV222 treatment as an alternative to UV254 could be viable for inhibiting microorganism photoreactivation in water and wastewater.

Ultraviolet C inactivation of Coxiella burnetii for production of a structurally preserved whole cell vaccine antigen

Q fever, a worldwide-occurring zoonotic disease, can cause economic losses for public and veterinary health systems. Vaccines are not yet available worldwide and currently under development. In this regard, it is important to produce a whole cell antigen, with preserved structural and antigenic properties and free of chemical modifications. Thus, inactivation of Coxiella burnetii with ultraviolet light C (UVC) was evaluated. C. burnetii Nine Mile phase I (NMI) and phase II (NMII) were exposed to decreasing intensities in a time-dependent manner and viability was tested by rescue cultivation in axenic medium or cell culture. Effects on the cell structure were visualized by transmission electron microscopy and antigenicity of UVC-treated NMI was studied by immunization of rabbits. NMI and NMII were inactivated at UVC intensities of 250 µW/cm2 for 5 min or 100 µW/cm2 for 20 min. Reactivation by DNA repair was considered to be unlikely. No morphological changes were observed directly after UVC inactivation by transmission electron microscopy, but severe swelling and membrane degradation of bacteria with increasing severity occurred after 24 and 48 h. Immunization of rabbits resulted in a pronounced antibody response. UVC inactivation of C. burnetii resulted in a structural preserved, safe whole cell antigen and might be useful as antigen for diagnostic purposes or as vaccine candidate.

In situ generation of highly localized chlorine by laser-induced graphene electrodes during electrochemical disinfection

Laser-induced graphene (LIG) has gained popularity for electrochemical water disinfection due to its efficient antimicrobial activity when activated with low voltages. However, the antimicrobial mechanism of LIG electrodes is not yet fully understood. This study demonstrated an array of mechanisms working synergistically to inactivate bacteria during electrochemical treatment using LIG electrodes, including the generation of oxidants, changes in pH-specifically high alkalinity associated with the cathode, and electro-adsorption on the electrodes. All these mechanisms may contribute to the disinfection process when bacteria are close to the surface of the electrodes where inactivation was independent of the reactive chlorine species (RCS); however, RCS was likely responsible for the predominant cause of antibacterial effects in the bulk solution (i.e., ≥100 mL in our study). Furthermore, the concentration and diffusion kinetics of RCS in solution was voltage-dependent. At 6 V, RCS achieved a high concentration in water, while at 3 V, RCS was highly localized on the LIG surface but not measurable in water. Despite this, the LIG electrodes activated by 3 V achieved a 5.5-log reduction in Escherichia coli (E.coli) after 120-min electrolysis without detectable chlorine, chlorate, or perchlorate in the water, suggesting a promising system for efficient, energy-saving, and safe electro-disinfection.

Exploring a chemical scaffold for rapid and selective photoaffinity labelling of non-ribosomal peptide synthetases in living bacterial cells

Non-ribosomal peptide synthetases (NRPSs) biosynthesize many pharmaceuticals and virulence factors. The biosynthesis of these natural peptide products from biosynthetic gene clusters depends on complex regulations in bacteria. However, our current knowledge of NRPSs is based on enzymological studies using full NRPS systems and/or a single NRPS domain in heterologous hosts. Chemical and/or biochemical strategies to capture the endogenous activities of NRPSs facilitate studies on NRPS cell biology in bacterial cells. Here, we describe a chemical scaffold for the rapid and selective photoaffinity labelling of NRPSs in purified systems, crude biological samples and living bacterial cells. We synthesized photoaffinity labelling probes coupled with 5'-O-N-(phenylalanyl)sulfamoyladenosine with clickable alkyl diazirine or trifluoromethyl phenyl diazirine. We found that a trifluoromethyl phenyl diazirine-based probe cross-linked the Phe-activating domain of a GrsA-NRPS with high selectivity and sensitivity at shorter ultraviolet (UV) irradiation times (less than 5 min) relative to a prototypical benzophenone-based probe. Our results demonstrated that this quick labelling protocol can prevent damage to proteins and cells caused by long UV irradiation times, providing a mild photoaffinity labelling method for biological samples. This article is part of the theme issue 'Reactivity and mechanism in chemical and synthetic biology'.

Occurrence of fungal spores in drinking water: A review of pathogenicity, odor, chlorine resistance and control strategies

Fungi in drinking water have been long neglected due to the lack of convenient analysis methods, widely accepted regulations and efficient control strategies. However, in the last few decades, fungi in drinking water have been widely recognized as opportunity pathogens that cause serious damage to the health of immune-compromised individuals. In drinking water treatment plants, fungal spores are more resistant to chlorine disinfection than bacteria and viruses, which can regrow in drinking water distribution systems and subsequently pose health threats to water consumers. In addition, fungi in drinking water may represent an ignored source of taste and odor (T&O). This review identified 74 genera of fungi isolated from drinking water and presented their detailed taxonomy, sources and biomass levels in drinking water systems. The typical pathways of exposure of water-borne fungi and the main effects on human health are clarified. The fungi producing T&O compounds and their products are summarized. Data on free chlorine or monochloramine inactivation of fungal spores and other pathogens are compared. At the first time, we suggested four chlorine-resistant mechanisms including aggregation to tolerate chlorine, strong cell walls, cellular responses to oxidative stress and antioxidation of melanin, which are instructive for the future fungi control attempts. Finally, the inactivation performance of fungal spores by various technologies are comprehensively analyzed. The purpose of this study is to provide an overview of fungi distribution and risks in drinking water, provide insight into the chlorine resistance mechanisms of fungal spores and propose approaches for the control of fungi in drinking water.

Wind of change: Better air for microbial environmental control

Background

The COVID19 epidemic highlighted the importance of air in the transmission of pathogens. Air disinfection is one of the key points to reduce the risk of transmission both in the health sector and in public, civil and industrial environments. All bacteria and viruses tested to date can be inactivated by UV-C rays. Laboratory tested UV-C systems are increasingly popular and proposed as effective technologies for air purification; few studies have evaluated their performance in populated indoor environments. The aim of this investigation was to evaluate the effectiveness of a UV-C disinfection system for air in a real working context.

Methods

This experimental study was conducted between December 2020 and February 2021 in an office of the Department of Molecular and Developmental Medicine of the University of Siena, Italy. A pre-final version air purifier (Cleaning Air T12), capable of treating 210 m³/h of air, was first tested for its ability to filter particulates and reduce microbial air contamination in the absence of people. Subsequently, the experiments were conducted in the presence of 3-5 subjects who worked for several hours in an office. During the tests, microbiological samples of air were collected in real time, switching the system on and off periodically. Air samples were collected and incubated on Petri dishes at 36 °C and 22 °C. Statistical analysis was performed with Stata 16 software assuming a significance level of 95%. An interpolating model was identified to describe the dynamics of contamination reduction when the device operates.

Results

Preliminary tests showed a significant 62.5% reduction in Colony-Forming Units (CFUs) with 36 °C incubation. Reductions in the particulate component were also observed. In the main test, comparison of CFU data, between the device-on phase (90 min) and the subsequent device-off phase (60 min), showed statistically significant increase (p = 0.001) of environmental contamination passing from a mean of 86.6 (65.8-107.4) to 171.1 (143.9-198.3) CFU/m³, that is a rise of about 100%. The interpolating model exhibited a good fit of CFU reduction trend with the device on.

Conclusions

The system, which mainly uses UV-C lamps for disinfection, was able to significantly reduce environmental and human contamination in real time. Experimental tests have shown that as soon as the device is switched off, after at least half an hour of operation, the healthiness of the air decreases drastically within 10 minutes, bringing the airborne microbial contamination (induced by the presence of operators in the environment) to levels even higher than 150% of the last value with the device on. Re-engineering strategies for system improvement were also discussed.

Current understanding on antibacterial mechanisms and research progress of tea polyphenols as a supplementary disinfectant for drinking water

Disinfection by-products (DBPs) generated during the disinfection of drinking water have become an urgent problem. So, tea polyphenol, a natural green disinfectant, has attracted widespread attention in recent years. This review summarizes the antibacterial mechanism of tea polyphenols and the recent findings on tea polyphenols as disinfectants for drinking water. These studies show that tea polyphenol is an antibacterial agent that works through different mechanisms and can be used as a supplementary disinfectant because of its higher lasting effect and economical cost. The dosage of tea polyphenols as a disinfectant of ultrafiltration effluent is the lowest among all the tea polyphenols disinfection methods, which can ensure the microbial safety of drinking water. This application of tea polyphenols is deemed a practical solution to solving the issue of disinfecting drinking water and reducing DBPs. However, it is necessary to further explore the influence of factors such as pipeline materials on the disinfection process and efficacy to expand the application scope of tea polyphenols. The large-scale application of tea polyphenols still needs to be fine-tuned but with new developments in tea polyphenol purification technology and the long-term need for drinking water that is safe for human consumption, tea polyphenols have good prospects for further development.

Assessment of phytotoxic potential and pathogenic bacteria removal from secondary effluents during ozonation and UV/H2O2

Wastewater reuse is an important strategy for water resource management. For this reason, the disinfection process must be appropriated, eliminating pathogenic microorganisms. Ozonation (O₃) and UV/H₂O₂ treatments can be used for effluent disinfection, but few studies just address the Escherichia coli quantification. In this study, secondary effluents from two wastewater treatment plants with different characteristics were exposed to O₃ (5 and 10 mg L^-1) or UV/H₂O₂ (H₂O₂: 90 mg L^-1) treatments and evaluated by BD Phoenix ™ 100 (Becton Dickinson, USA) and MALDI-TOF for the characterization of the indigenous microorganisms in the effluents, before and after treatments. Additionally, all the samples were tested for phytotoxicity by Lactuca sativa bioassay. The results showed that the highest ozone dose and the UV/H₂O₂ treatment were effective in removing E. coli. UV/H₂O₂ was more efficient as it eliminated most of the microorganisms. Acinetobacter sp., Aeromonas and Pseudomonas were still found after O₃ treatment. Bacillus sp. was found after O₃ and UV/H₂O₂ treatments. The results with L. sativa showed inhibition of root growth for all dry period (low rainfall) samples of one of the WWTP, due to the high concentration of the phytotoxicity compounds. For environmental and human health safety, treated effluents should be evaluated for their toxic and pathogenic potential before being released into the environment. Pathogens evaluation on treated effluents should cover a wider range of pathogenic microorganisms than those routinely required by legislation.

Light-emitting diodes effect on Aspergillus species in filtered surface water: DNA damage, proteome response and potential reactivation

DNA damage and changes in proteome response can occur as a consequence of UV light exposure. The emerging light-emitting diodes (LEDs) can be acquired with different wavelengths. In this study, LEDs that emit at 255 nm and 265 nm were selected to test the DNA damage and proteome response after inactivation of A. fumigatus, A. niger and A. terreus spiked into filtered surface water. Additionally, photoreactivation and dark repair studies were performed to evaluate the potential ability of the spores to recover after UV exposure. Results showed that both LEDs were able to induce the formation of cyclobutane pyrimidine dimers in A. fumigatus and A. terreus whereas, for A. niger, the formation of cyclobutane pyrimidine dimers was only detected when the LEDs that induced inactivation (that emit at 265 nm) were used. Proteome response showed that UV radiation treatment triggered different types of stress response, mainly concerning the protection from oxidative stress by A. fumigatus and A. terreus. Photoreactivation was detected for all the species except A. niger and, no dark repair was observed.

Effectiveness of solar water disinfection in the era of COVID-19 (SARS-CoV-2) pandemic for contaminated water/wastewater treatment considering UV effect and temperature

Long is the way and hard, that out of COVID-19 leads up to light. The virus is highly contagious and spread rapidly and the number of infections increases exponentially. The colossal number of infections and presence of the novel coronavirus RNA in human wastes (e.g. Excreta/urine) even after the patients recovered and the RT-PCR tests were negative, results in massive load of the viral in water environments. Numerous studies reported the presence of SARS-CoV-2 in wastewater samples. The risk of contaminating water bodies in the regions which suffer from the lack of proper sanitation system and wastewater treatment plants (mostly in developing countries) is higher. Since solar water disinfection (SODIS) is usually used by people in developing countries, there is a concern about using this method during the pandemic. Because the SARS-CoV-2 can be eliminated by high temperature (>56 °C) and UVC wavelength (100-280 nm) while SODIS systems mainly work at lower temperature (<45 °C) and use the available UVA (315-400 nm). Thus, during a situation like the ongoing pandemic using SODIS method for wastewater treatment (or providing drinking water) is not a reliable method. It should be reminded that the main aim of the present study is not just to give insights about the possibilities and risks of using SODIS during the ongoing pandemic but it has broader prospect for any future outbreak/pandemic that results in biological contamination of water bodies. Nevertheless, some experimental studies seem to be necessary by all researchers under conditions similar to developing countries.

Assessment of the UV/Chlorine Process in the Disinfection of Pseudomonas aeruginosa: Efficiency and Mechanism

UV irradiation and chlorination have been widely used for water disinfection. However, there are some limitations, such as the risk of generating viable but nonculturable bacteria and bacteria reactivation when using UV irradiation or chlorination alone. This study comprehensively evaluated the feasibility of the UV/chlorine process in drinking water disinfection, and Pseudomonas aeruginosa was selected as the target microorganism. The number of culturable cells was effectively reduced by more than 5 orders of magnitude (5-log₁₀) after UV, chlorine, and UV/chlorine treatments. However, intact and VBNC cells were detected at 10³ to 10⁴ cells/mL after UV and chlorine treatments, whereas they were undetectable after UV/chlorine treatment due to the primary contribution of reactive chlorine species (Cl^•, Cl₂^•-, and ClO^•). After UV/chlorine treatment, the metabolic activity determined using single cell Raman spectroscopy was much lower than that after UV. The level of toxic opr gene in P. aeruginosa decreased by more than 99% after UV/chlorine treatment. Importantly, bacterial dark reactivation was completely suppressed by UV/chlorine treatment but not UV or chlorination. This study suggests that the UV/chlorine treatment can completely damage bacteria and is promising for pathogen inactivation to overcome the limitations of UV and chlorine treatments alone.

Inactivation of Aspergillus species in real water matrices using medium pressure mercury lamps

The aim of this work is to understand the inactivation efficiency of medium pressure mercury lamps, measured in terms of growth inhibition as well as cell death, damage and response, using three strains from three different Aspergillus species (A. fumigatus, A. niger and, A. terreus) spiked in filtered surface water. A complete characterization of the effect of the treatment on each strain of the fungal species was assessed considering spores' morphology, cell wall integrity and enzymatic activity, the formation of pyrimidine dimers in the DNA and proteome analysis. Results showed that, when subjected to medium pressure mercury lamps, A. niger is the most resistant to inactivation, that both A. fumigatus and A. niger suffer more morphological changes and present a higher number of damaged spores and A. terreus presented more dead spores. DNA damages detected in A. niger were able to be repaired to some extent, under both light and dark conditions. Finally, proteome analysis showed that the UV radiation treatment triggered different types of stress response, including cell wall reorganization and DNA repair in A. fumigatus and A. terreus, and oxidative stress responses like the increase in production of citric acid and itaconic acid in A. niger and A. terreus, respectively.

Enhancement of UV disinfection of urine matrixes by electrochemical oxidation

This work focuses on the removal of antibiotic-resistant bacteria (ARB) contained in hospital urines by UV disinfection enhanced by electrochemical oxidation to overcome the limitations of both single processes in the disinfection of this type of effluents. UV disinfection, electrolysis, and photoelectrolysis of synthetic hospital urine intensified with K. pneumoniae were studied. The influence of the current density and the anode material was assessed on the disinfection performance of combined processes and the resulting synergies and/or antagonisms of coupling both technologies were also evaluated. Results show that the population of bacteria contained in hospital urine is only reduced by 3 orders of magnitude during UV disinfection. Electrolysis leads to complete disinfection of hospital urine when working at 50 A m^-2 using Boron Doped Diamond (BDD) and Mixed Metal Oxides (MMO) as anodes. The coupling of electrolysis to the UV disinfection process leads to the highest disinfection rates, attaining a complete removal of ARB for all the current densities and anode materials tested. The use of MMO anodes leads to higher synergies than BDD electrodes. Results confirm that UV disinfection can be enhanced by electrolysis for the removal of ARB in urine, considering both technical and economic aspects.

Design and Optimization of Piezoelectric-Powered Portable UV-LED Water Disinfection System

Due to the environmental pollution threatening human life, clean water accessibility is one of the major global issues. In this context, in literature, there are many portable water disinfection systems utilizing ultraviolet (UV) radiation. UV water disinfection systems employ piezoelectric-based electric power along with UV light-emitting diode (LED) sources. This paper elaborates on the detailed design and parametric optimization of a portable UV disinfection system. The proposed system aims to generate piezoelectric harvesting-based electrical power simply by shaking, and the generated power is then used to supply UV-LEDs for water disinfection. To this end, overall system parameters along with a physical-mathematical model of mechanical, electrical and biochemical aspects of the system are fully developed. Moreover, the main design parameters of the developed model are derived for optimal operation of the system by employing Genetic Algorithm (GA). Finally, optimal design parameters were identified for three different cost scenarios. The model can further be improved for practical implementation and mass production of the system.

Impact of a Combination of UV-C Irradiation and Peracetic Acid Spray Treatment on Brochothrix thermosphacta and Yersinia enterocolitica Contaminated Pork

Efficient ways of decontamination are needed to minimize the risk of infections with Yersinia (Y.) enterocolitica, which causes gastrointestinal diseases in humans, and to reduce the numbers of Brochothrix (B.) thermosphacta to extend the shelf-life of meat. While many studies have focused on a single treatment of peracetic acid (PAA) or UV-C-irradiation, there are no studies about a combined treatment on meat. Therefore, in the present study, pork was inoculated with either Y. enterocolitica or B. thermosphacta, and was treated with a combination of 2040 mJ/cm² UV-C irradiation followed by a 2000 ppm PAA spray treatment (30 s). Samples were packed under modified atmosphere and stored for 1, 7, or 14 days. The samples were examined for Y. enterocolitica and B. thermosphacta content, chemical and sensory effects, and meat quality parameters. For Y. enterocolitica, a significant reduction of up to 2.16 log₁₀ cfu/cm² meat and for B. thermosphacta, up to 2.37 log₁₀ cfu/cm² meat was seen on day 14 after UV-C/PAA treatment compared to the untreated controls.

Disinfection of Wastewater by UV-Based Treatment for Reuse in a Circular Economy Perspective. Where Are We at?

Among the critical issues that prevent the reuse of wastewater treatment plants (WWTPs) effluents in a circular economy perspective, the microbiological component plays a key role causing infections and diseases. To date, the use of conventional chemical oxidants (e.g., chlorine) represent the main applied process for wastewater (WW) disinfection following a series of operational advantages. However, toxicity linked to the production of highly dangerous disinfection by-products (DBPs) has been widely demonstrated. Therefore, in recent years, there is an increasing attention to implement sustainable processes, which can simultaneously guarantee the microbiological quality of the WWs treated and the protection of both humans and the environment. This review focuses on treatments based on ultraviolet radiation (UV) alone or in combination with other processes (sonophotolysis, photocatalysis and photoelectrocatalysis with both natural and artificial light) without the dosage of chemical oxidants. The strengths of these technologies and the most significant critical issues are reported. To date, the use of synthetic waters in laboratory tests despite real waters, the capital and operative costs and the limited, or absent, experience of full-scale plant management (especially for UV-based combined processes) represent the main limits to their application on a larger scale. Although further in-depth studies are required to ensure full applicability of UV-based combined processes in WWTPs for reuse of their purified effluents, excellent prospects are presented thanks to an absent environmental impact in terms of DBPs formation and excellent disinfection yields of microorganisms (in most cases higher than 3-log reduction).

Simplified modeling of E. coli mortality after genome damage induced by UV-C light exposure

UV light is a group of high-energy waves from the electromagnetic spectrum. There are three types of UV radiations: UV-A, -B and -C. UV-C light are the highest in energy, but most are retained by the ozone layer. UV-A and -B reach the earth's surface and cause damage on living organisms, being considered as mutagenic physical agents. Numerous test models are used to study UV mutagenicity; some include special lamps, cell cultures and mathematical modeling. Mercury lamps are affordable and useful sources of UV-C light due to their emission at near the maximum absorption peak of nucleic acids. E. coli cultures are widely used because they have DNA-damage and -repairing mechanisms fairly similar to humans. In here we present two simple models that describe UV-C light incidence on a genome matrix, using fundamental quantum-mechanical concepts and considering light as a particle with a discontinuous distribution. To test the accuracy of our equations, stationary phase cultures of several E. coli strains were exposed to UV-C light in 30 s-intervals. Surviving CFUs were counted and survival/mortality curves were constructed. These graphs adjusted with high goodness of fit to the regression predictions. Results were also analyzed using three main parameters: quantum yield, specific speed and time of mortality.

Reuse of ultrafiltered effluents for crop irrigation: On-site flow cytometry unveiled microbial removal patterns across a full-scale tertiary treatment

Reuse of treated wastewater for crop irrigation has been widely adopted to mitigate the effects of water scarcity on agricultural yields and to help preserving the integrity of aquatic ecosystems. This paper presents the outcomes of one-year monitoring of a full-scale agro-industrial wastewater treatment plant designed for water reuse, with a multistage tertiary treatment based on sand filtration, membrane ultrafiltration, storage and on-demand UV disinfection. We aimed to test flow cytometry as a monitoring tool to provide on-site indications on tertiary treatment performances and on the quality of treated wastewater along the treatment scheme. Membrane ultrafiltration retained prokaryotic cells and E. coli (>3 log). During storage of treated effluents, a significant decay of E. coli was observed together with the growth of prokaryotic and eukaryotic cells, and the UV disinfection was effective only against fecal indicators. The microbial quality of the treated effluent was comparable to the control groundwater locally used for irrigation. On-site rapid assessments by flow cytometry allowed unveiling crucial aspects affecting the microbiological quality of ultrafiltration permeate and treated effluent immediately after sampling, including plant operating performances and microbial removal patterns across the treatment train.

Disinfection by in-duct ultraviolet lamps under different environmental conditions in turbulent airflows

In this study, we investigated the effects of environmental factors such as airflow velocity, relative humidity (RH), temperature, and duct reflectance on the performance of in-duct UVC lamps. Staphylococcus epidermidis, Pseudomonas alcaligenes, and Escherichia coli were used as the test bacteria. The UV irradiance, disinfection efficacy, and UV susceptibility constant (Z value) of the test bacteria were experimentally determined. The results showed that the UV disinfection efficacy decreased as the airflow velocity and RH increased. The maximum UV disinfection efficacy was obtained at temperature of 20-21°C compared with the performance at lower temperature (15-16°C) and higher temperature (25-26°C). When the RH increased from 50% to 90%, the Z values of airborne bacteria reduced by 40%, 60%, and 38% for S epidermidis, P alcaligenes, and E coli, respectively. Besides, susceptibility constants had lower values under both cooling temperature (15-16°C) and heating temperature (25-26°C) compared with that under the temperature of 20-21°C. It was observed that S epidermidis generally had the highest resistance to the UV irradiance. The results also showed that the UV disinfection efficacy was lower in the duct with a black surface than in the clean duct.

Efficacy of UVC-LED in water disinfection on Bacillus species with consideration of antibiotic resistance issue

Ultraviolet light emitting diode (UV-LED) has attracted extensive attention as a new technology to replace traditional mercury lamp for water disinfection. This study reported for the first time the application of UVC-LEDs in range of 200-280 nm for the treatment of two Gram-positive tetracycline resistant bacteria (TRB) from Bacillus species and their tetracycline resistant gene (TRG). The results showed that UVC-LEDs can inactivate TRB up to 5.7-log and inhibit TRG expression, especially at 268 nm. The required fluence was approximate to that of the referential non-resistant bacteria using the same UVC-LED, but far less than that of TRB using mercury lamp. After UVC-LED irradiation, photoreactivation was the dominant mechanism to repair TRB, just like non-resistant bacteria. But contrary to non-resistant bacteria, the regrowth ratio of TRB was remarkably high at 24 h since the end of the irradition, nevertheless the number of the regrown bacteria in the irradiated water was still less than that in the non-irradiated water. Whereas TRB restored resistance after repair even applying 268 nm at a fluence up to 46.08 mJ/cm² (maximum in this study). This study highlights the merits of UVC-LED to effectively inactivate TRB in a prompt, energy-efficient and resistance-reducing way, while future study on TRB regrowth and resistance resilience is needed.

Legionellosis and Recent Advances in Technologies for Legionella Control in Premise Plumbing Systems: A Review

This review discusses Legionella, among the most prolific and publicly well-known waterborne pathogens, and advances in potential treatment technologies. The number of cases associated with Legionella continues to rise, as does its public awareness. Currently, cases associated with premise plumbing account for the largest number of legionellosis cases in the United States. So, while it is important to understand Legionella as such, it is also important to investigate how to treat drinking water in premise plumbing for Legionella and other waterborne pathogens. While there are currently several methods recognized as potential means of inactivating waterborne pathogens, several shortcomings continue to plague its implementation. These methods are generally of two types. Firstly, there are chemical treatments such as chlorine, chlorine dioxide, monochloramine, ozone, and copper-silver ionization. Secondly, there are physical treatments such as thermal inactivation and media filtration. Their shortcomings range from being labor-intensive and costly to having negative health effects if not properly operated. Recently developed technologies including ultraviolet (UV) irradiation using light emitting diodes (LEDs) and innovative carbon nanotube (CNT) filters can better control waterborne pathogens by allowing for the simultaneous use of different treatment measures in plumbing systems.

The effects of ultraviolet disinfection on vancomycin-resistant Enterococcus faecalis

The emergence of vancomycin-resistant Enterococcus faecalis (E. faecalis) in water is threatening the health of human beings. The effect of ultraviolet disinfection on vancomycin-resistant E. faecalis, including the effectiveness, photoreactivation and dark repair of E. faecalis, and the deactivation mechanism were investigated in this work. Ultraviolet disinfection could quickly inactivate the target antibiotic resistant bacterium (ARB), E. faecalis, and it caused damage to the cell membrane and induced the decrease of the total adenosine triphosphate (ATP) content and the superoxide dismutase (SOD) activity significantly (p < 0.05). E. faecalis could reactivate after ultraviolet disinfection especially under light conditions. Furthermore, the removal of the selected antibiotic resistance gene (ARG), vanB, by ultraviolet radiation and the effect on the vancomycin resistance of E. faecalis were investigated, which showed that ultraviolet disinfection had no significant effect on the vancomycin resistance of E. faecalis (p > 0.05).

Oral inoculation of ultraviolet-irradiated Eimeria species oocysts protects chickens against coccidiosis

Prevention of coccidiosis is one of the best ways of controlling disease. Therefore, the present study was carried out to evaluate the protective effect of ultraviolet (UV)-irradiated sporulated oocysts of Eimeria species against coccidiosis in layer chickens. One hundred forty-four one-day-old layer chicks were randomly divided into 4 groups (n = 36), including non-immunized/non-challenged negative control group (NC group), non-immunized/challenged control group (NIC group), non-irradiated sporulated oocyst/challenged group (CA group), and UV-irradiated sporulated oocyst/challenged (UV group). At the age of 4 days, chickens in groups UV and CA were both orally inoculated with 1.0 × 10⁴ UV-irradiated and non-irradiated sporulated oocysts of Eimeria species, respectively. Chickens in groups NIC and NC were served as positive and negative controls, respectively. Chickens in all groups were orally challenged with 7.5 × 10⁴ sporulated oocysts of Eimeria species except the NC group at the age of 21 days. The results revealed that chicks receiving UV-irradiated sporulated oocysts had no signs of illness with minimal or no changes in the cecal integrity and a significantly lower oocyst shedding (OPG) than in the NIC group. Additionally, the cytokine gene expression profiles were evaluated. Expression levels of IL-2, IL-12, and IFN-γ were significantly higher in the spleen of chicks in the UV and CA groups than in the NC group post-challenge. As expected, treatment with irradiated oocysts resulted in a significant reduction in oocyst shedding and maintenance of cecal mucosal integrity. Furthermore, the body weight was higher in chickens inoculated with UV-irradiated oocysts than their non-irradiated counterparts. In conclusion, our results demonstrate that inoculation with UV-irradiated sporulated oocysts of Eimeria species can produce a substantial reduction in infection symptoms.

Higher functionality of bacterial plasmid DNA in water after peracetic acid disinfection compared with chlorination

Peracetic acid (PAA) is an emerging disinfectant with a low disinfection by-product formation potential, but how PAA destroys gene function after killing bacteria remains to be studied. Bacterial plasmid DNA is a mobile genetic element that often harbors undesirable genes encoding antibiotic resistance and virulence factors. Even though PAA efficiently kills bacteria, bacterial plasmids and other mobile genetic elements might still be intact and functional after PAA disinfection, posing potential public health and environmental risks. This study evaluated the impact of PAA disinfection on the functionality of plasmid DNA in vivo and compared the results with those from chlorination. We delivered a plasmid DNA harboring two antibiotic resistance genes to Escherichia coli TOP10 to form an antibiotic-resistant bacterium (ARB). The planktonic ARB was treated with PAA and chlorine to find the minimum doses inhibiting the regrowth of the strain. PAA and chlorine stopped the regrowth at 8 ± 1 mg PAA·L^-1 and 20 ± 9 mg Cl₂·L^-1, respectively. The functionality of the plasmid DNA after PAA and chlorine disinfection was then determined at higher doses in vivo. Neither PAA nor chlorine completely destroyed the plasmid DNA. However, chlorine was more efficient than PAA in eliminating the plasmid DNA. PAA at 25 mg PAA·L^-1 reduced the transforming activity of the plasmid DNA by less than 0.3 log₁₀ units, whereas chlorine at 25 mg Cl₂·L^-1 reduced the transforming activity by approximately 1.7 log₁₀ units. Chlorine had a more pronounced impact on the functionality of the plasmid DNA because it oxidizes or destroys bacterial components including plasmid DNA faster than PAA. In addition, environmental scanning electron microscopy shows that chlorination desiccated the cells resulting in the flat cellular structure and possibly more complete loss of plasmid DNA, whereas PAA disinfection had a less impact on cell structure and morphology. This study demonstrates that more plasmid DNA remains functional in water after PAA disinfection than after chlorination. These functional genetic elements could be acquired by other microorganisms via horizontal gene transfer to pose potential public health and environmental risks.

Population and single cell metabolic activity of UV-induced VBNC bacteria determined by CTC-FCM and D2O-labeled Raman spectroscopy

The occurrence of viable but non-culturable (VBNC) bacteria will result in significant underestimation of viable bacterial counts in drinking water. Whereas, much is unknown in characterizing their viability. In this study, two environmental isolates (Aeromonas sp. and Pseudomonas sp.) and two model strains (E. coli and S. aureus) were induced into VBNC state by UV irradiation. Then, their metabolic activity was determined by 5-cyano-2,3-ditolyl tetrazolium chloride combination flow cytometry (CTC-FCM) and D₂O-labeled Raman spectroscopy, respectively, at both population and single cell levels. The results showed that almost all strains could enter VBNC state irradiated by ≥ 5 mJ/cm² UV. When determined by CTC-FCM, the population metabolic activity for each strain did not vary significantly (p > 0.05) unless the UV dose reached 200 mJ/cm². Their single cell activity spectrum narrowed slightly, as indicated by changes in the standard deviation of the logarithmic normal distribution (σ) of 0.015-0.033. This minute difference suggested the CTC-FCM method was suitable for assessing the essential viability of VBNC bacteria. With respect to Raman method, an obvious dose-response effect was recorded. With the UV dosages increased from 10 to 200 mJ/cm², the CD/(CD + CH) for the four strains were reduced to between 95.7% and 47.9% of unirradiated controls, depending on strain and UV dose. Meanwhile, the single cellular Raman spectrum showed much more heterogeneously metabolic activity distribution, with some cells even entering metabolic "silence". Considering the ubiquitous participation of water in biochemical processes, the Raman method was more appropriate in assessing the overall metabolic activity. The above findings can not only be a reference for VBNC mechanism studies, but also have the potential in optimizing disinfection and other bacterial removal processes.

Simultaneous removal of antibiotics and antibiotic resistance genes from pharmaceutical wastewater using the combinations of up-flow anaerobic sludge bed, anoxic-oxic tank, and advanced oxidation technologies

Pharmaceutical wastewater often contains high levels of antibiotic residues and serves as an important reservoir for antibiotic resistance genes (ARGs). However, the current pharmaceutical wastewater treatment plants (PWWTPs) were not sufficiently effective in removing antibiotics and ARGs. Here, we designed a lab-scale simulation reactor, including up-flow anaerobic sludge bed (UASB), anoxic-oxic tank (A/O), and four separate advanced oxidation processes (AOPs) i.e., UV, Ozonation, Fenton, and Fenton/UV, to simultaneously remove 18 antibiotics and 10 ARGs from a real pharmaceutical wastewater. The results showed that all antibiotics were fully eliminated through the reactor during 180 d-operation. Among all treatment units, UASB provided the greatest contribution (85.8 ± 16.1%) for the removal of 18 antibiotics. The mass balance results manifested that degradation was a predominant mechanism for the removal of tetracyclines, sulfamethoxazole, and ampicillin (62.5-80.9%), while sorption to sludge (73.9%) was predominant for enrofloxacin removal in UASB. Meanwhile, the substantial decrease of ARG absolute abundance (log reduction by 0.1-3.1 fold) through the whole reactor was observed although the existence of the partial enrichment (1.2-3.8 log units) from the influent to the A/O unit. Fenton/UV combination was the most effective AOP for the removal of ARGs. Finally, the optimum operating conditions for the removal of ARGs using Fenton was also proposed considering the relatively lower cost and high ARG elimination. Overall, this study provides feasible suggestions for the design of real PWWTPs for simultaneous removal of antibiotics and ARGs.

Activated Carbon as a Cathode for Water Disinfection through the Electro-Fenton Process

Unlike many other water disinfection methods, hydroxyl radicals (HO^•) produced by the Fenton reaction (Fe²⁺/H₂O₂) can inactivate pathogens regardless of taxonomic identity of genetic potential and do not generate halogenated disinfection by-products. Hydrogen peroxide (H₂O₂) required for the process is typically electrogenerated using various carbonaceous materials as cathodes. However, high costs and necessary modifications to the cathodes still present a challenge to large-scale implementation. In this work, we use granular activated carbon (GAC) as a cathode to generate H₂O₂ for water disinfection through the electro-Fenton process. GAC is a low-cost amorphous carbon with abundant oxygen- and carbon-containing groups that are favored for oxygen reduction into H₂O₂. Results indicate that H₂O₂ production at the GAC cathode is higher with more GAC, lower pH, and smaller reactor volume. Through the addition of iron ions, the electrogenerated H₂O₂ is transformed into HO^• that efficiently inactivated model pathogen (Escherichia coli) under various water chemistry conditions. Chick–Watson modeling results further showed the strong lethality of produced HO^• from the electro-Fenton process. This inactivation coupled with high H₂O₂ yield, excellent reusability, and relatively low cost of GAC proves that GAC is a promising cathodic material for large-scale water disinfection.

Effects of UV disinfection on phenotypes and genotypes of antibiotic-resistant bacteria in secondary effluent from a municipal wastewater treatment plant

To elucidate the effects of UV disinfection on antibiotic resistance in biologically-treated wastewater, we investigated the antibiotic resistance profiles, species of cultivable heterotrophic bacteria, and antibiotic-resistance genes (ARGs) in antibiotic-resistant bacteria before and after treatment. UV disinfection greatly changed the bacterial community structure and the antibiotic resistance in wastewater. The antibiotic resistance in wastewater samples was strongly associated with the bacterial community. The proportions of Gram-positive bacteria gradually increased with increasing UV fluence. The proportions of bacteria resistant to cephalexin, penicillin, and vancomycin all greatly decreased after UV treatment in both sampling events (July 2018 and January 2019), and those for bacteria resistant to ofloxacin, ciprofloxacin, and sulfadiazine increased, resulting from the alternative antibiotic resistance profiles among different genera. UV disinfection induced the selection of multi-antibiotic resistant (MAR) bacteria. For example, the MAR indices of Aeromonas, the dominant genus during the treatments, were significantly increased after UV irradiation (P < 0.05). The MAR index was also markedly increased (P < 0.05) at a fluence of 5 mJ/cm² in both events. In UV10 treatment, the bacterial community structure was greatly changed. The genera with relatively low MAR indices replaced that with high MAR indices, and became the dominant genera. As a result, the MAR indices of treated samples showed a decreased trend after 10 mJ/cm² UV irradiation. The detection frequencies of ARGs located on the chromosome varied mainly due to the evolution of the microbial community. The occurrence of ARGs (tetA, tetC, tetM, tetW, tetX, and sul1) located on plasmid DNA decreased after UV disinfection, and the average detection frequencies of tet and sul genes decreased by 15% and 6%, respectively (P < 0.05). Generally speaking, the effect of UV disinfection on the enrichment of antibiotic resistance is limited in this study, and horizontal gene transfer via the plasmids in surviving bacteria might be impaired due to the decreased abundance of ARGs on the plasmids.

Intensification of UV-C tertiary treatment: Disinfection and removal of micropollutants by sulfate radical based Advanced Oxidation Processes

This study explores the enhancement of UV-C tertiary treatment by sulfate radical based Advanced Oxidation Processes (SR-AOPs), including photolytic activation of peroxymonosulfate (PMS) and persulfate (PS) and their photocatalytic activation using Fe(II). Their efficiency was assessed both for the inactivation of microorganisms and the removal or micropollutants (MPs) in real wastewater treatment plant effluents. Under the studied experimental range (UV-C dose 5.7-57 J/L; UV-C contact time 3 to 28 s), the photolysis of PMS and PS (0.01 mM) increased up to 25% the bacterial removal regarding to UV-C system. The photolytic activation of PMS led to the total inactivation of bacteria (≈ 5.70 log) with the highest UV-C dose (57 J/L). However, these conditions were insufficient to remove the MPs, being required oxidant's dosages of 5 mM to remove above 90% of carbamazepine, diclofenac, atenolol and triclosan. The best efficiencies were achieved by the combination of PMS or PS with Fe(II), leading to the total removal of the MPs using a low UV-C dosage (19 J/L), UV-C contact time (9 s) and reagent's dosages (0.5 mM). Finally, high mineralization was reached (>50%) with photocatalytic activation of PMS and PS even with low reagent's dosages.

Moving from the traditional paradigm of pathogen inactivation to controlling antibiotic resistance in water - Role of ultraviolet irradiation

Ultraviolet (UV) irradiation has proven an effective tool for inactivating microorganisms in water. There is, however, a need to look at disinfection from a different perspective because microbial inactivation alone may not be sufficient to ensure the microbiological safety of the treated water since pathogenic genes may still be present, even after disinfection. Antibiotic resistance genes (ARGs) are of a particular concern since they enable microorganisms to become resistant to antibiotics. UV irradiation has been widely used for disinfection and more recently for destroying ARGs. While UV lamps remain the principal technology to achieve this objective, UV light emitting diodes (UV-LEDs) are novel sources of UV irradiation and have increasingly been reported in lab-scale investigations as a potential alternative. This review discusses the current state of the applications of UV technology for controlling antibiotic resistance during water and wastewater treatment. Since UV-LEDs possess several attractive advantages over conventional UV lamps, the impact of UV-LED characteristics (single vs combined wavelengths, and operational parameters such as periodic or pulsed and continuous irradiation, pulse repetition frequencies, duty cycle), type of organism, and fluence response, are critically reviewed with a view to highlighting the research needs for addressing future disinfection challenges. The energy efficiency of the reported UV processes is also evaluated with a focus on relating the findings to disinfection efficacy. The greater experience with UV lamps could be useful for investigating UV-LEDs for similar applications (i.e., antibiotic resistance control), and hence identification of future research directions.

Experimental evidence on prevention of infection by the ectoparasitic protozoans Ichthyobodo salmonis and Trichodina truttae in juvenile chum salmon using ultraviolet disinfection of rearing water

In northern Japan, juvenile chum salmon Oncorhynchus keta (Walbaum) are released from hatcheries to enhance the fishery resource. Infections with ectoparasitic protozoans, particularly the flagellate Ichthyobodo salmonis and the ciliate Trichodina truttae, occasionally cause severe mortality among hatchery-reared juveniles. This study examined the susceptibility of the two parasites to wide-ranging UV irradiation (experiment 1) and then investigated whether UV disinfection of the rearing water using a commercial device was useful for preventing infections among juveniles in a small-scale rearing system over a 28-day period (experiment 2). In experiment 1, parasite mortality reached 100% with UV irradiation doses of ≥9.60 × 10⁵  μW s/cm² for I. salmonis and ≥8.40 × 10⁵  μW s/cm² for T. truttae. In experiment 2, disinfection of the rearing water at a UV irradiation dose of 2.2 × 10⁶  μW s/cm² succeeded in complete prevention of both parasites in the juvenile salmon. These results elucidate the minimum dose of UV irradiation for inactivation of I. salmonis and T. truttae, and demonstrate the usefulness of water disinfection using a commercial UV irradiation device to prevent infections by these parasites in hatchery-reared juvenile chum salmon.

Ultraviolet A and B wavelength-dependent inactivation of viruses and bacteria in the water

UVA and UVB can be applied to solar disinfection of water. In this study, the inactivation and photoreactivation of viruses and bacteria in the UVA-B range were analyzed. MS2 and T4 bacteriophages, and Escherichia coli were used as surrogates to quantify dose-response behaviors. Inactivation in UVC was used to validate the methodology and to expand the inactivation action spectra. The results showed log-linear inactivation for MS2 and T4 in the 254-320 nm wavelength range. T4 inactivation was consistently faster than MS2 (except at 320 nm), and for both phages, inactivation decreased with increasing wavelength. The dose-response of bacteria exhibited a lag at low doses, possibly because the photons must strike a discrete number of critical targets before growth stops. A tail was present at high doses for some wavelengths, perhaps due to clumping or the presence of subgroups with higher resistance. The inactivation action spectra for bacteria exhibited a reduction in inactivation as wavelength increased. No bacterial inactivation was observed beyond 320 nm at doses applied. After inactivation at 297 nm (UVA), bacteria regained viability through photoreactivation, and repair increased with increase in photoreactivating light exposure time. This implies additional doses above inactivation thresholds are required to cause irreversible damage. These results are useful for designing solar disinfection systems.

The role of operating parameters and oxidative damage mechanisms of advanced chemical oxidation processes in the combat against antibiotic-resistant bacteria and resistance genes present in urban wastewater

An upsurge in the study of antibiotic resistance in the environment has been observed in the last decade. Nowadays, it is becoming increasingly clear that urban wastewater is a key source of antibiotic resistance determinants, i.e. antibiotic-resistant bacteria and antibiotic resistance genes (ARB&ARGs). Urban wastewater reuse has arisen as an important component of water resources management in the European Union and worldwide to address prolonged water scarcity issues. Especially, biological wastewater treatment processes (i.e. conventional activated sludge), which are widely applied in urban wastewater treatment plants, have been shown to provide an ideal environment for the evolution and spread of antibiotic resistance. The ability of advanced chemical oxidation processes (AOPs), e.g. light-driven oxidation in the presence of H₂O₂, ozonation, homogeneous and heterogeneous photocatalysis, to inactivate ARB and remove ARGs in wastewater effluents has not been yet evaluated through a systematic and integrated approach. Consequently, this review seeks to provide an extensive and critical appraisal on the assessment of the efficiency of these processes in inactivating ARB and removing ARGs in wastewater effluents, based on recent available scientific literature. It tries to elucidate how the key operating conditions may affect the process efficiency, while pinpointing potential areas for further research and major knowledge gaps which need to be addressed. Also, this review aims at shedding light on the main oxidative damage pathways involved in the inactivation of ARB and removal of ARGs by these processes. In general, the lack and/or heterogeneity of the available scientific data, as well as the different methodological approaches applied in the various studies, make difficult the accurate evaluation of the efficiency of the processes applied. Besides the operating conditions, the variable behavior observed by the various examined genetic constituents of the microbial community, may be directed by the process distinct oxidative damage mechanisms in place during the application of each treatment technology. For example, it was shown in various studies that the majority of cellular damage by advanced chemical oxidation may be on cell wall and membrane structures of the targeted bacteria, leaving the internal components of the cells relatively intact/able to repair damage. As a result, further in-depth mechanistic studies are required, to establish the optimum operating conditions under which oxidative mechanisms target internal cell components such as genetic material and ribosomal structures more intensively, thus conferring permanent damage and/or death and preventing potential post-treatment re-growth.

Development of a molecular method for testing the effectiveness of UV systems on-site

We established a molecular method for quantifying ultraviolet (UV) disinfection efficacy using total bacterial DNA in a water sample. To evaluate UV damage to the DNA, we developed the "DNA damage" factor, which is a novel cultivation-independent approach that reveals UV-exposure efficiency by applying a simple PCR amplification method. The study's goal was to prove the feasibility of this method for demonstrating the efficiency of UV systems in the field using flow-through UV reactors. In laboratory-based experiments using seeded bacteria, the DNA damage tests demonstrated a good correlation between PCR products and UV dose. In the field, natural groundwater sampled before and after being subjected to the full-scale UV reactors was filtered, and the DNA extracted from the filtrate was subjected to PCR amplification for a 900-bp fragment of the 16S rRNA gene with initial DNA concentrations of 0.1 and 1 ng/μL. In both cases, the UV dose predicted and explained a significant proportion of the variance in the log inactivation ratio and DNA damage factor. Log inactivation ratio was very low, as expected in groundwater due to low initial bacterial counts, whereas the DNA damage factor was within the range of values obtained in the laboratory-based experiments. Consequently, the DNA damage factor reflected the true performance of the full-scale UV system during operational water flow by using the indigenous bacterial array present in a water sample. By applying this method, we were able to predict with high confidence, the UV reactor inactivation potential. For method validation, laboratory and field iterations are required to create a practical field calibration curve that can be used to determine the expected efficiency of the full-scale UV system in the field under actual operation.

Comparison of UV-LED and low pressure UV for water disinfection: Photoreactivation and dark repair of Escherichia coli

Studies on ultraviolet light-emitting diode (UV-LED) water disinfection have shown advantages, such as safety, flexible design, and lower starting voltages. However, information about reactivation after UV-LED disinfection is limited, which is an important issue of UV light-based technology. In this study, the photoreactivation and dark repair of Escherichia coli after UV-LEDs and low pressure (LP) UV disinfection were compared. Four UV-LED units, 265 nm, 280 nm, the combination of 265 + 280 (50%), and 265 + 280 (75%) were tested. 265 nm LEDs was more effective than 280 nm LEDs and LP UV lamps for E. coli inactivation. No synergic effect for disinfection was observed from the combination of 265 and 280 nm LEDs. 265 nm LEDs had no different reactivation performances with that of LP UV, while 280 nm LEDs could significantly repress photoreactivation and dark repair at a low irradiation intensity of 6.9 mJ/cm². Furthermore, the UV-induced damage of 280 nm LEDs was less repaired which was determined by endonuclease sensitive site (ESS) assay. The impaired protein activities by 280 nm LEDs might be one of the reasons that inhibited reactivation. A new reactivation rate constant, K_max, was introduced into the logistic model to simulate the reactivation data, which showed positive relationship with the maximum survival ratio and was more reasonable to interpret the results of photoreactivation and dark repair. This study revealed the distinct roles of different UV lights in disinfection and reactivation, which is helpful for the future design of UV-LED equipment.

Application of ultraviolet light-emitting diodes (UV-LEDs) for water disinfection: A review

Ultraviolet (UV) disinfection is an effective technology for the inactivation of pathogens in water and is of growing interest for industrial application. A new UV source - ultraviolet light-emitting diode (UV-LED) - has emerged in the past decade with a number of advantages compared to traditional UV mercury lamps. This promising alternative raises great interest in the research on application of UV-LEDs for water treatment. Studies on UV-LED water disinfection have increased during the past few years. This article presents a comprehensive review of recent studies on UV-LEDs with various wavelengths for the inactivation of different microorganisms. Many inconsistent and incomparable data were found from published studies, which underscores the importance of establishing a standard protocol for studying UV-LED inactivation of microorganisms. Different UV sensitivities to UV-LEDs and traditional UV lamps were observed in the literature for some microorganisms, which requires further investigation for a better understanding of microorganism response to UV-LEDs. The unique aspects of UV-LEDs improve inactivation effectiveness by applying LED special features, such as multiple wavelengths and pulsed illumination; however, more studies are needed to investigate the influencing factors and mechanisms. The special features of UV-LEDs offer the flexibility of novel reactor designs for a broad application of UV-LED reactors.

Ultraviolet radiation as a ballast water treatment strategy: Inactivation of phytoplankton measured with flow cytometry

This study investigates different UV doses (mJ/cm(2)) and the effect of dark incubation on the survival of the algae Tetraselmis suecica, to simulate ballast water treatment and subsequent transport. Samples were UV irradiated and analyzed by flow cytometry and standard culturing methods. Doses of ≥400 mJ/cm(2) rendered inactivation after 1 day as measured by all analytical methods, and are recommended for ballast water treatment if immediate impairment is required. Irradiation with lower UV doses (100-200 mJ/cm(2)) gave considerable differences of inactivation between experiments and analytical methods. Nevertheless, inactivation increased with increasing doses and incubation time. We argue that UV doses ≥100 mJ/cm(2) and ≤200 mJ/cm(2) can be sufficient if the water is treated at intake and left in dark ballast tanks. The variable results demonstrate the challenge of giving unambiguous recommendations on duration of dark incubation needed for inactivation when algae are treated with low UV doses.

A comparative study of disinfection efficiency and regrowth control of microorganism in secondary wastewater effluent using UV, ozone, and ionizing irradiation process

Ionizing radiation technology was suggested as an alternative method to disinfection processes, such as chlorine, UV, and ozone. Although many studies have demonstrated the effectiveness of irradiation technology for microbial disinfection, there has been a lack of information on comparison studies of disinfection techniques and a regrowth of each treatment. In the present study, an ionizing radiation was investigated to inactivate microorganisms and to determine the critical dose to prevent the regrowth. As a result, it was observed that the disinfection efficiency using ionizing radiation was not affected by the seasonal changes of wastewater characteristics, such as temperature and turbidity. In terms of bacterial regrowth after disinfection, the ionizing radiation showed a significant resistance of regrowth, whereas, on-site UV treatment is influenced by the suspended solid, temperature, or precipitation. The electric power consumption was also compared for the economic feasibility of each technique at a given value of disinfection efficiency of 90% (1-log), showing 0.12, 36.80, and 96.53 Wh/(L/day) for ionizing radiation, ozone, and UV, respectively. The ionizing radiation requires two or three orders of magnitude lower power consumption than UV and ozone. Consequently, ionizing radiation can be applied as an effective and economical alternative technique to other conventional disinfection processes.

A pulsed light system for the disinfection of flow through water in the presence of inorganic contaminants

The use of ultraviolet (UV) light for water disinfection has become increasingly popular due to on-going issues with drinking water and public health. Pulsed UV light has proved to be an effective form of inactivating a range of pathogens including parasite species. However, there are limited data available on the use of pulsed UV light for the disinfection of flowing water in the absence or presence of inorganic contaminants commonly found in water sources. Here, we report on the inactivation of test species including Bacillus endospores following pulsed UV treatment as a flow through system. Significant levels of inactivation were obtained for both retention times tested. The presence of inorganic contaminants iron and/or manganese did affect the rate of disinfection, predominantly resulting in an increase in the levels of inactivation at certain UV doses. The findings of this study suggest that pulsed UV light may provide a method of water disinfection as it successfully inactivated bacterial cells and bacterial endospores in the absence and presence of inorganic contaminants.