Nucleotide sequence of the gene for cholesterol oxidase from a Streptomyces sp

Improvement of thermostability of cholesterol oxidase from streptomyces Sp. SA-COO by random mutagenesis

To enhance the thermal stability of Streptomyces Sp. SA-COO cholesterol oxidase, random mutagenesis was used. A random mutant library was generated using two types of error-prone PCR (single step and serial dilution) and two mutants (ChOA-M1 and ChOA-M2) with improved thermostability were obtained. The best mutant ChOA-M1 acquired three amino acid substitutions (G49T, W52K, and F62V) and improved thermostability (at 50 °C for 5 h) by 40% and increased the kcat/Km value by 23%. The optimum pH was desirably changed to encompass a broad range from alkali to acid and circular dichroism revealed no significant secondary structure changes in mutants against wild type. These findings indicated that random mutagenesis was an effective technique for optimizing cholesterol oxidase properties and make a foundation for practical applications of Cholesterol oxidase in clinical diagnosis and industrial fields.

Cholesterol interaction motifs in G protein-coupled receptors: Slippery hot spots?

G protein-coupled receptors (GPCRs) are cell membrane associated signaling hubs that orchestrate a multitude of cellular functions upon binding to a diverse variety of extracellular ligands. Since GPCRs are integral membrane proteins with seven-transmembrane domain architecture, their function, organization and dynamics are intimately regulated by membrane lipids, such as cholesterol. Cholesterol is an extensively studied lipids in terms of its effects on GPCR structure and function. One of the possible mechanisms underlying modulation of GPCR function by cholesterol is via specific interaction of GPCRs with membrane cholesterol. These interactions of GPCRs with membrane cholesterol are often attributed to structural features of GPCRs that could facilitate their preferential association with cholesterol. In this backdrop, cholesterol interaction motifs represent putative interaction sites on GPCRs that could facilitate cholesterol-sensitive function of these receptors. In this review, we provide an overview of cholesterol interaction motifs found in GPCRs, which have been identified through a combination of crystallography, bioinformatics analysis, and functional studies. In addition, we will highlight, using specific examples, why mere presence of a cholesterol interaction motif at a given site may not directly implicate its role in interaction with membrane cholesterol. We therefore believe that experimental approaches, followed by functional analysis of cholesterol sensitivity of GPCRs, would provide a better understanding of the role played by these motifs in cholesterol-sensitive function. We envision that a comprehensive knowledge of cholesterol interaction sites in GPCRs would allow us to develop a better understanding of GPCR structure-function paradigm, and could be useful in future therapeutics. This article is categorized under: Models of Systems Properties and Processes > Mechanistic Models Analytical and Computational Methods > Computational Methods Laboratory Methods and Technologies > Macromolecular Interactions, Methods.

Characterization and overproduction of cell-associated cholesterol oxidase ChoD from Streptomyces lavendulae YAKB-15

Cholesterol oxidases are important enzymes with a wide range of applications from basic research to industry. In this study, we have discovered and described the first cell-associated cholesterol oxidase, ChoD, from Streptomyces lavendulae YAKB-15. This strain is a naturally high producer of ChoD, but only produces ChoD in a complex medium containing whole yeast cells. For characterization of ChoD, we acquired a draft genome sequence of S. lavendulae YAKB-15 and identified a gene product containing a flavin adenine dinucleotide binding motif, which could be responsible for the ChoD activity. The enzymatic activity was confirmed in vitro with histidine tagged ChoD produced in Escherichia coli TOP10, which lead to the determination of basic kinetic parameters with K_m 15.9 µM and k_cat 10.4/s. The optimum temperature and pH was 65 °C and 5, respectively. In order to increase the efficiency of production, we then expressed the cholesterol oxidase, choD, gene heterologously in Streptomyces lividans TK24 and Streptomyces albus J1074 using two different expression systems. In S. albus J1074, the ChoD activity was comparable to the wild type S. lavendulae YAKB-15, but importantly allowed production of ChoD without the presence of yeast cells.

Expression optimization of recombinant cholesterol oxidase in Escherichia coli and its purification and characterization

Cholesterol oxidase is a bacterial flavoenzyme which catalyzes oxidation and isomerization of cholesterol. This enzyme has a great commercial value because of its wide applications in cholesterol analysis of clinical samples, synthesis of steroid-derived drugs, food industries, and potentially insecticidal activity. Accordingly, development of an efficient protocol for overexpression of cholesterol oxidase can be very valuable and beneficial. In this study, expression optimization of cholesterol oxidase from Streptomyces sp. SA-COO was investigated in Escherichia coli host strains. Various parameters that may influence the yield of a recombinant enzyme were evaluated individually. The optimal host strain, culture media, induction time, Isopropyl ß-d-1-thiogalactopyranoside concentration, as well as post-induction incubation time and temperature were determined in a shaking flask mode. Applying the optimized protocol, the production of recombinant cholesterol oxidase was significantly enhanced from 3.2 to 158 U/L. Under the optimized condition, the enzyme was produced on a large-scale, and highly expressed cholesterol oxidase was purified from cell lysate by column nickel affinity chromatography. K_m and V_max values of the purified enzyme for cholesterol were estimated using Lineweaver–Burk plot. Further, the optimum pH and optimum temperature for the enzyme activity were also determined. We report a straightforward and easy protocol for cholesterol oxidase production which can be performed in any laboratory.

Biomedical Applications of Enzymes From Marine Actinobacteria

Marine microbial enzyme technologies have progressed significantly in the last few decades for different applications. Among the various microorganisms, marine actinobacterial enzymes have significant active properties, which could allow them to be biocatalysts with tremendous bioactive metabolites. Moreover, marine actinobacteria have been considered as biofactories, since their enzymes fulfill biomedical and industrial needs. In this chapter, the marine actinobacteria and their enzymes' uses in biological activities and biomedical applications are described.

Ergosterols from the Culture Broth of Marine Streptomyces anandii H41-59

An actinomycete strain, H41-59, isolated from sea sediment in a mangrove district, was identified as Streptomyces anandii on the basis of 16S rDNA gene sequence analysis as well as the investigation of its morphological, physiological and biochemical characteristics. Three new ergosterols, ananstreps A-C (1-3), along with ten known ones (4-13), were isolated from the culture broth of this strain. The gross structures of these new compounds were elucidated on the basis of extensive analysis of spectroscopic data, including HR-ESI-MS, and NMR. The cytotoxicities of these isolates against human breast adenocarcinoma cell line MCF-7, human glioblastoma cell line SF-268, and human lung cancer cell line NCI-H460 and their antibacterial activities in inhibiting the growth of Candida albicans and some other pathogenic microorganisms were tested. Compounds 3-8, 10 and 11 displayed cytotoxicity with IC50 values in a range from 13.0 to 27.8 μg/mL. However, all the tested compounds showed no activity on C. albicans and other bacteria at the test concentration of 1 mg/mL with the paper disc diffusion method.

Pathogen roid rage: cholesterol utilization by Mycobacterium tuberculosis

The ability of science and medicine to control the pathogen Mycobacterium tuberculosis (Mtb) requires an understanding of the complex host environment within which it resides. Pathological and biological evidence overwhelmingly demonstrate how the mammalian steroid cholesterol is present throughout the course of infection. Better understanding Mtb requires a more complete understanding of how it utilizes molecules like cholesterol in this environment to sustain the infection of the host. Cholesterol uptake, catabolism and broader utilization are important for maintenance of the pathogen in the host and it has been experimentally validated to contribute to virulence and pathogenesis. Cholesterol is catabolized by at least three distinct sub-pathways, two for the ring system and one for the side chain, yielding dozens of steroid intermediates with varying biochemical properties. Our ability to control this worldwide infectious agent requires a greater knowledge of how Mtb uses cholesterol to its advantage throughout the course of infection. Herein, the current state of knowledge of cholesterol metabolism by Mtb is reviewed from a biochemical perspective with a focus on the metabolic genes and pathways responsible for cholesterol steroid catabolism.

Immobilization of R. erythropolis in alginate-based artificial cells for simulated plaque degradation in aqueous media

Cholesterol degradation rates of free and immobilized Rhodococcus erythropolis (ATCC # 25544) were studied utilizing the bacterium's cholesterol oxidase enzyme pathway to degrade cholesterol in an aqueous simulated non-calcified plaque solution. An L16 (4(5)) Taguchi design was used to minimize the glycolipid bio-surfactant by-product in the growth medium, to improve bacterial viability in the immobilized state. As an expected outcome of miniaturization, there is a significant difference between the atomized (d = 850 ± 50 μm) and inkjet-bioprinted (d = 32 ± 5 μm) lumped kinetic degradation rates after 48 h (p = 0.029, α = 0.05) per ml of jetted alginate. Based on a biphasic cholesterol degradation model, at an initial bacterial cell density of Nlow = 4.53 × 10(8)/ml, for an initial cholesterol concentration of 3 mg/ml, the percentage mass of metabolite degraded is 37.0% ± 0.42%, 57.8% ± 0.04% and 65.1% ± 0.01% for the free, atomized and inkjet immobilized bacteria, respectively.

ChoD and HsdD can be dispensable for cholesterol degradation in mycobacteria

Cholesterol degradation is achieved through a complex metabolic pathway that starts with the oxidation of the 17-alkyl side chain and the steroid ring system. In bacteria, the oxidation of the 3β-hydroxyl group and isomerization of the resulting cholest-5-en-3-one to cholest-4-en-3-one is catalyzed by hydroxysteroid dehydrogenase (HsdD) or cholesterol oxidase (ChoD). Genes encoding both enzymes were annotated in both fast and slow growing mycobacteria, however the enzymatic activity was confirmed for HsdD, exclusively. Here, we used homologous recombination to engineer multiple mutants, and directly show that both ChoD and HsdD are dispensable for cholesterol degradation in fast-growing Mycobacterium smegmatis mc(2)155 and slow-growing Mycobacterium tuberculosis H37Rv strains. The mutants deffective in the synthesis of ChoD, HsdD or both enzymes were able to grow in minimal media supplemented with cholesterol as a sole source of carbon and energy. Multiple mutants, defective in synthesis of ChoD, HsdD and ketosteroid dehydrogenase (KstD), showed attenuated growth in minimal medium supplemented with cholesterol and accumulated cholesterol degradation intermediates: androstendion (AD) and 9-hydroxy androstendion (9OHAD).

Cholesterol oxidase ChoD is not a critical enzyme accounting for oxidation of sterols to 3-keto-4-ene steroids in fast-growing Mycobacterium sp. VKM Ac-1815D

Fast-growing strain of Mycobacterium sp. VKM Ac-1815D is capable of effective oxidizing of sterols (phytosterol, cholesterol, ergosterol) to androstenedione and other valuable 3-oxo-steroids. To elucidate the role of cholesterol oxidase in sterol catabolism by the strain, the choD gene has been cloned and sequenced. The deduced gene product (M(r) 63.5kDa) showed homologies over its entire length to a large number of proteins belonging to the InterPro-family EPR006076, which includes various FAD dependent oxidoreductases. The expression of choD in Escherichia coli was shown to result in the synthesis of membrane associated cholesterol oxidase. In addition to cholesterol, the enzyme oxidized β-sitosterol, dehydroepiandrosterone, ergosterol, pregnenolone, and lithocholic acid. Knock-out of choD in Mycobacterium sp. VKM Ac-1815D strain was obtained by the gene replacement technique. The mutant strain transformed sitosterol forming exclusively 3-keto-4-ene steroids with androstenedione as a major product, thus evidencing that choD knock out did not abrogate sterol A-ring oxidation. The results indicated that ChoD is not a critical enzyme responsible for modification of 3β-hydroxy-5-ene- to 3-keto-4-ene steroids in Mycobacterium sp. VKM Ac-1815D. Article from a special issue on steroids and microorganisms.

Protein-carbon nanotube sensors: single platform integrated micro clinical lab for monitoring blood analytes

Design of a unique, single-platform, integrated, multichannel sensor based on carbon nanotube (CNT)-protein adducts specific to each one of the major analytes of blood, glucose, cholesterol, triglyceride, and Hb1AC is presented. The concept underlying the sensor, amperometric detection, is applicable to various disease-monitoring strategies. There is an urgent need to enhance the sensitivity of glucometers to <5% level instead of greater than the present 15% standard in these detectors. CNTs enhance the signals derived from the interaction of the enzymes with the different analytes in blood. Fabricated sensors using the new methodology is a point-of-care device that is targeted for home, clinical, and emergency use and can be redesigned for continuous monitoring for critical care patients.

Cholesterol oxidase: structure and function

Cholesterol oxidase is a bacterial-specific flavoenzyme that catalyzes the oxidation and isomerisation of steroids containing a 3beta hydroxyl group and a double bond at the Delta5-6 of the steroid ring system. The enzyme is a member of a large family of flavin-specific oxidoreductases and is found in two different forms: one where the flavin adenine dinucleotide (FAD) cofactor is covalently linked to the protein and one where the cofactor is non-covalently bound to the protein. These two enzyme forms have been extensively studied in order to gain insight into the mechanism of flavin-mediated oxidation and the relationship between protein structure and enzyme redox potential. More recently the enzyme has been found to play an important role in bacterial pathogenesis and hence further studies are focused on its potential use for future development of novel antibacterial therapeutic agents. In this review the biochemical, structural, kinetic and mechanistic features of the enzyme are discussed.

Cholesterol oxidase ChoL is a critical enzyme that catalyzes the conversion of diosgenin to 4-ene-3-keto steroids in Streptomyces virginiae IBL-14

Diosgenin transformation was studied in Streptomyces virginiae IBL-14, a soil-dwelling bacterium with diosgenin-degrading capacity. All of the derivatives isolated were identified as 4-ene-3-keto steroids. We cloned ChoL, a fragment of a cholesterol oxidase from S. virginiae IBL-14, and used gene-disruption techniques to determine its function in the oxidation of diosgenin to 4-ene-3-keto steroids. Subsequently, the entire open reading frame of ChoL was cloned by chromosome walking, and the His(6)-tagged recombinant protein was overproduced, purified, and characterized. ChoL consisted of 1,629 nucleotides that encoded a protein of 542 amino acids, including a 34-residue putative signal peptide at the N-terminal. ChoL showed 85% amino acid similarity to ChoA from Streptomyces sp. SA-COO. This enzyme can also oxidize other steroids such as cholesterol, sitosterol, and dehydroepiandrosterone, which showed higher affinity (K(m) = 0.195 mM) to diosgenin. The catalytic properties of this enzyme indicate that it may be useful in diosgenin transformation, degradation, and assay.

Cholesterol Oxidases Act as Signaling Proteins for the Biosynthesis of the Polyene Macrolide Pimaricin

The gene cluster responsible for pimaricin biosynthesis in Streptomyces natalensis contains a cholesterol oxidase-encoding gene (pimE) surrounded by genes involved in pimaricin production. Gene-inactivation and -complementation experiments revealed that pimE encodes a functional cholesterol oxidase and, surprisingly, that it is also involved in pimaricin biosynthesis. This extracellular enzyme was purified from S. natalensis culture broths to homogeneity, and it was shown to restore pimaricin production when added to the mutant culture broths. Other cholesterol oxidases also triggered pimaricin production, suggesting that these enzymes could act as signaling proteins for polyene biosynthesis. This finding constitutes the description of a cholesterol oxidase gene with an involvement in antibiotic biosynthesis, and it broadens the scope of the biological functions for this type of oxidase.

Coenzyme precursor-assisted expression of a cholesterol oxidase from Brevibacterium sp. in Escherichia coli

The gene (choB(b)), encoding cholesterol oxidase from Brevibacterium sp. CCTCC M201008, was cloned and sequenced by PCR (GenBank accession number: DQ345780). The gene consists of 1653 base pairs and encodes a protein of 551 amino acids. ChoB(b) exhibited a homology of 98% with cholesterol oxidase gene from Brevibacterium sterolicum ATCC 21387. The cholesterol oxidase gene, cloned in the vector pET-28a, was over-expressed in Escherichia coli BL21-CodonPlus (DE3)-RP grown at 23 degrees C in Luria-Bertani medium containing 50 microM riboflavin, the precursor of the FAD coenzyme of the enzyme. A maximum activity of 3.7 U/mg was obtained from cell free extract of E. coli BL21-CodonPlus (DE3)-RP harboring the pET-28a-choB(b).

Site-directed mutagenesis of selected residues at the active site of aryl-alcohol oxidase, an H2O2-producing ligninolytic enzyme

Aryl-alcohol oxidase provides H(2)O(2) for lignin biodegradation, a key process for carbon recycling in land ecosystems that is also of great biotechnological interest. However, little is known of the structural determinants of the catalytic activity of this fungal flavoenzyme, which oxidizes a variety of polyunsaturated alcohols. Different alcohol substrates were docked on the aryl-alcohol oxidase molecular structure, and six amino acid residues surrounding the putative substrate-binding site were chosen for site-directed mutagenesis modification. Several Pleurotus eryngii aryl-alcohol oxidase variants were purified to homogeneity after heterologous expression in Emericella nidulans, and characterized in terms of their steady-state kinetic properties. Two histidine residues (His502 and His546) are strictly required for aryl-alcohol oxidase catalysis, as shown by the lack of activity of different variants. This fact, together with their location near the isoalloxazine ring of FAD, suggested a contribution to catalysis by alcohol activation, enabling its oxidation by flavin-adenine dinucleotide (FAD). The presence of two aromatic residues (at positions 92 and 501) is also required, as shown by the conserved activity of the Y92F and F501Y enzyme variants and the strongly impaired activity of Y92A and F501A. By contrast, a third aromatic residue (Tyr78) does not seem to be involved in catalysis. The kinetic and spectral properties of the Phe501 variants suggested that this residue could affect the FAD environment, modulating the catalytic rate of the enzyme. Finally, L315 affects the enzyme k(cat), although it is not located in the near vicinity of the cofactor. The present study provides the first evidence for the role of aryl-alcohol oxidase active site residues.

Genetic and protein engineering of diagnostic enzymes, cholesterol oxidase and xylitol oxidase

For a long time, clinical diagnosis has been made mainly using chemical methods. Recently, several excellent substrate-specific enzymes have been developed and these enzymes are used as diagnostic catalysts. Using enzymes, it is possible to assay for a specific substance from specimens of serum or urine without the need for isolation of the substance which simplifies the process and shortens the assay time. Furthermore, the use of enzymatic assay methods for diagnosis has been facilitated by the developments in genetic engineering which made it possible to overproduce enzymes inexpensively. Here, we review the diagnostic enzymes, cholesterol oxidase and xylitol oxidase, which were successfully overproduced in our laboratory. In particular, the catalytic activity and pH and thermal stabilities of cholesterol oxidase were improved.

A simple and rapid method to measure cholesterol binding to P450s and other proteins

Cholesterol plays an important role in cellular function and membrane compartmentalization and is involved in the interaction with more than a dozen of different proteins. Using three cholesterol-metabolizing cytochrome P450s (P450s 7A1, 46A1, and 11A1), we have developed a rapid and simple assay for measurements of nanomolar to micromolar cholesterol affinities. In this assay, the P450 is incubated with a fixed amount of radiolabeled cholesterol and varying concentrations of cold cholesterol followed by separation of free and protein-bound cholesterol via filtration through a membrane. Free cholesterol is found in the flow-through fraction, whereas P450 binds to the membrane. The radioactivity of the membranes is then measured, and a saturation curve is generated after correction for nonspecific binding of cholesterol to the filter. The validity of the filter assay was confirmed by spectral assay, a traditional method to evaluate the interaction of the P450 enzymes with their substrates. Two types of membranes, one binding positively charged proteins and another binding negatively charged proteins, were identified. These membranes were also found to hold proteins through hydrophobic interactions. Thus, the cholesterol binding properties of a wide variety of proteins could be characterized using this filter assay.

Cholesterol superlattice modulates the activity of cholesterol oxidase in lipid membranes

Here, the interplay between membrane cholesterol lateral organization and the activity of membrane surface-acting enzymes was addressed using soil bacteria cholesterol oxidase (COD) as a model. Specifically, the effect of the membrane cholesterol mole fraction on the initial rate of cholesterol oxidation catalyzed by COD was investigated at 37 degrees C using cholesterol/1-palmitoyl-2-oleoyl-l-alpha-phosphatidylcholine (POPC) large unilamellar vesicles (LUVs, approximately 800 nm in diameter). In the three concentration ranges examined (18.8-21.2, 23.6-26.3, and 32.2-34.5 mol % cholesterol), the initial activity of COD changed with cholesterol mole fraction in a biphasic manner, exhibiting a local maximum at 19.7, 25.0, and 33.4 mol %. Within the experimental errors, these mole fractions agree with the critical cholesterol mole fractions (C(r)) (20.0, 25.0, and 33.3) theoretically predicted for maximal superlattice formation. The activity variation with cholesterol content was correlated well with the area of regular distribution (A(reg)) in the plane of the membrane as determined by nystatin fluorescence. A similar biphasic change in COD activity was detected at the critical sterol mole fraction 20 mol % in dehydroergosterol (DHE)/POPC LUVs (approximately 168 nm in diameter). These results indicate that the activity of COD is regulated by the extent of sterol superlattice for both sterols (DHE and cholesterol) and for a wide range of vesicle sizes (approximately 168-800 nm). The present work on COD and the previous study on phospholipase A(2) (sPLA(2)) [Liu and Chong (1999) Biochemistry 38, 3867-3873] suggest that the activities of some surface-acting enzymes may be regulated by the extent of sterol superlattice in the membrane in a substrate-dependent manner. When the substrate is a sterol, as it is with COD, the enzyme activity reaches a local maximum at C(r). When phospholipid is the substrate, the minimum activity is at C(r), as is the case with sPLA(2). Both phenomena are in accordance with the sterol superlattice model and manifest the functional importance of membrane cholesterol content.

Sub-atomic resolution crystal structure of cholesterol oxidase: what atomic resolution crystallography reveals about enzyme mechanism and the role of the FAD cofactor in redox activity

The crystal structure of cholesterol oxidase, a 56kDa flavoenzyme was anisotropically refined to 0.95A resolution. The final crystallographic R-factor and R(free) value is 11.0% and 13.2%, respectively. The quality of the electron density maps has enabled modeling of alternate conformations for 83 residues in the enzyme, many of which are located in the active site. The additional observed structural features were not apparent in the previous high-resolution structure (1.5A resolution) and have enabled the identification of a narrow tunnel leading directly to the isoalloxazine portion of the FAD prosthetic group. The hydrophobic nature of this narrow tunnel suggests it is the pathway for molecular oxygen to access the isoalloxazine group for the oxidative half reaction. Resolving the alternate conformations in the active site residues provides a model for the dynamics of substrate binding and a potential oxidation triggered gating mechanism involving access to the hydrophobic tunnel. This structure reveals that the NE2 atom of the active site histidine residue, H447, critical to the redox activity of this flavin oxidase, acts as a hydrogen bond donor rather than as hydrogen acceptor. The atomic resolution structure of cholesterol oxidase has revealed the presence of hydrogen atoms, dynamic aspects of the protein and how side-chain conformations are correlated with novel structural features such as the oxygen tunnel. This new structural information has provided us with the opportunity to re-analyze the roles played by specific residues in the mechanism of the enzyme.

Purification and some properties of cholesterol oxidase stable in detergents from γ-proteobacterium Y-134

Cholesterol oxidase (CHO) with high stability in detergents was found from an isolated strain, Y-134, belonging to the gamma-subclass of Proteobacteria. CHO production reached its maximum by incubation at 30 degrees C for 12 d. It was purified from cell-free extract prepared by mixing the cells with 0.4% Triton X-100. The absorption spectrum of the purified enzyme exhibited maxima at 274 and 410 nm, and a shoulder at 330 nm. The molecular mass was 115 kDa with two identical subunits of 58 kDa. The enzyme oxidized cholest-5-en-3beta-ol (cholesterol) and 5alpha-cholestan-3beta-ol (dihydrocholesterol) at a high reaction rate, and the K(m) value for cholesterol was 65 microM. The stability of the enzyme was higher than other CHOs in nonionic detergents with high values of hydrophilelipophile balance (HLB) such as Triton X-450 and sodium cholate. NH2-terminal sequence analysis showed a high similarity to CHO from Burkholderia cepacia, but not to CHOs from Streptomyces or Brevibacterium.

Construction of a catalytically inactive cholesterol oxidase mutant: investigation of the interplay between active site-residues glutamate 361 and histidine 447

Cholesterol oxidase catalyzes the oxidation of cholesterol to cholest-5-en-3-one and its subsequent isomerization into cholest-4-en-3-one. Two active-site residues, His447 and Glu361, are important for catalyzing the oxidation and isomerization reactions, respectively. Double-mutants were constructed to test the interplay between these residues in catalysis. We observed that the k(cat) of oxidation for the H447Q/E361Q mutant was 3-fold less than that for H447Q and that the k(cat) of oxidation for the H447E/E361Q mutant was 10-fold slower than that for H447E. Because both doubles-mutants do not have a carboxylate at position 361, they do not catalyze isomerization of the reaction intermediate cholest-5-en-3-one to cholest-4-en-3-one. These results suggest that Glu361 can compensate for the loss of histidine at position 447 by acting as a general base catalyst for oxidation of cholesterol. Importantly, the construction of the double-mutant H447E/E361Q yields an enzyme that is 31,000-fold slower than wild type in k(cat) for oxidation. The H447E/E361Q mutant is folded like native enzyme and still associates with model membranes. Thus, this mutant may be used to study the effects of membrane binding in the absence of catalytic activity. It is demonstrated that in assays with caveolae membrane fractions, the wild-type enzyme uncouples platelet-derived growth factor receptor beta (PDGFRbeta) autophosphorylation from tyrosine phosphorylation of neighboring proteins, and the H447E/E361Q mutant does not. Thus maintenance of membrane structure by cholesterol is important for PDGFRbeta-mediated signaling. The cholesterol oxidase mutant probe described will be generally useful for investigating the role of membrane structure in signal transduction pathways in addition to the PDGFRbeta-dependent pathway tested.

Alteration of substrate specificity of cholesterol oxidase from Streptomyces sp. by site-directed mutagenesis

Despite the structural similarities between cholesterol oxidase from Streptomyces and that from Brevibacterium, both enzymes exhibit different characteristics, such as catalytic activity, optimum pH and temperature. In attempts to define the molecular basis of differences in catalytic activity or stability, substitutions at six amino acid residues were introduced into cholesterol oxidase using site-directed mutagenesis of its gene. The amino acid substitutions chosen were based on structural comparisons of cholesterol oxidases from Streptomyces and BREVIBACTERIUM: Seven mutant enzymes were constructed with the following amino acid substitutions: L117P, L119A, L119F, V145Q, Q286R, P357N and S379T. All the mutant enzymes exhibited activity with the exception of that with the L117P mutation. The resulting V145Q mutant enzyme has low activities for all substrates examined and the S379T mutant enzyme showed markedly altered substrate specificity compared with the wild-type enzyme. To evaluate the role of V145 and S379 residues in the reaction, mutants with two additional substitutions in V145 and four in S379 were constructed. The mutant enzymes created by the replacement of V145 by Asp and Glu had much lower catalytic efficiency for cholesterol and pregnenolone as substrates than the wild-type enzyme. From previous studies and this study, the V145 residue seems to be important for the stability and substrate binding of the cholesterol oxidase. In contrast, the catalytic efficiencies (k(cat)/K(m)) of the S379T mutant enzyme for cholesterol and pregnenolone were 1.8- and 6.0-fold higher, respectively, than those of the wild-type enzyme. The enhanced catalytic efficiency of the S379T mutant enzyme for pregnenolone was due to a slightly high k(cat) value and a low K(m) value. These findings will provide several ideas for the design of more powerful enzymes that can be applied to clinical determination of serum cholesterol levels and as sterol probes.

The presence of a hydrogen bond between asparagine 485 and the pi system of FAD modulates the redox potential in the reaction catalyzed by cholesterol oxidase

Cholesterol oxidase catalyzes the oxidation and isomerization of cholesterol to cholest-4-en-3-one. An asparagine residue (Asn485) at the active site is believed to play an important role in catalysis. To test the precise role of Asn485, we mutated it to a leucine and carried out kinetic and crystallographic studies. Steady-state kinetic analysis revealed a 1300-fold decrease in the oxidation k(cat)/K(m) for the mutant enzyme whereas the k(cat)/K(m) for isomerization is only 60-fold slower. The primary kinetic isotope effect in the mutant-catalyzed reaction indicates that 3alpha-H transfer remains the rate-determining step. Measurement of the reduction potentials for the wild-type and N485L enzymes reveals a 76 mV decrease in the reduction potential of the FAD for the mutant enzyme relative to wild type. The crystal structure of the mutant, determined to 1.5 A resolution, reveals a repositioning of the side chain of Met122 near Leu485 to form a hydrophobic pocket. Furthermore, the movement of Met122 facilitates the binding of an additional water molecule, possibly mimicking the position of the equatorial hydroxyl group of the steroid substrate. The wild-type enzyme shows a novel N-H...pi interaction between the side chain of Asn485 and the pyrimidine ring of the cofactor. The loss of this interaction in the N485L mutant destabilizes the reduced flavin and accounts for the decreased reduction potential and rate of oxidation. Thus, the observed structural rearrangement of residues at the active site, as well as the kinetic data and thermodynamic data for the mutant, suggests that Asn485 is important for creating an electrostatic potential around the FAD cofactor enhancing the oxidation reaction.

The hydroxynitrile lyase from almond: a lyase that looks like an oxidoreductase

BACKGROUND

Cyanogenesis is a defense process of several thousand plant species. Hydroxynitrile lyase, a key enzyme of this process, cleaves a cyanohydrin into hydrocyanic acid and the corresponding aldehyde or ketone. The reverse reaction constitutes an important tool in biocatalysis. Different classes of hydroxynitrile lyases have convergently evolved from FAD-dependent oxidoreductases, alpha/beta hydrolases, and alcohol dehydrogenases. The FAD-dependent hydroxynitrile lyases (FAD-HNLs) carry a flavin cofactor whose redox properties appear to be unimportant for catalysis.

RESULTS

We have determined the crystal structure of a 61 kDa hydroxynitrile lyase isoenzyme from Prunus amygdalus (PaHNL1) to 1.5 A resolution. Clear electron density originating from four glycosylation sites could be observed. As concerns the overall protein fold including the FAD cofactor, PaHNL1 belongs to the family of GMC oxidoreductases. The active site for the HNL reaction is probably at a very similar position as the active sites in homologous oxidases.

CONCLUSIONS

There is strong evidence from the structure and the reaction product that FAD-dependent hydroxynitrile lyases have evolved from an aryl alcohol oxidizing precursor. Since key residues implicated in oxidoreductase activity are also present in PaHNL1, it is not obvious why this enzyme shows no oxidase activity. Similarly, features proposed to be relevant for hydroxy-nitrile lyase activity in other hydroxynitrile lyases, i.e., a general base and a positive charge to stabilize the cyanide, are not obviously present in the putative active site of PaHNL1. Therefore, the reason for its HNL activity is far from being well understood at this point.

Identification and mutagenesis by allelic exchange of choE, encoding a cholesterol oxidase from the intracellular pathogen Rhodococcus equi

The virulence mechanisms of the facultative intracellular parasite Rhodococcus equi remain largely unknown. Among the candidate virulence factors of this pathogenic actinomycete is a secreted cholesterol oxidase, a putative membrane-damaging toxin. We identified and characterized the gene encoding this enzyme, the choE monocistron. Its protein product, ChoE, is homologous to other secreted cholesterol oxidases identified in Brevibacterium sterolicum and Streptomyces spp. ChoE also exhibits significant similarities to putative cholesterol oxidases encoded by Mycobacterium tuberculosis and Mycobacterium leprae. Genetic tools for use with R. equi are poorly developed. Here we describe the first targeted mutagenesis system available for this bacterium. It is based on a suicide plasmid, a selectable marker (the aacC4 apramycin resistance gene from Salmonella), and homologous recombination. The choE allele was disrupted by insertion of the aacC4 gene, cloned in pUC19 and introduced by electroporation in R. equi. choE recombinants were isolated at frequencies between 10(-2) and 10(-3). Twelve percent of the recombinants were double-crossover choE mutants. The choE mutation was associated with loss of cooperative (CAMP-like) hemolysis with sphingomyelinase-producing bacteria (Listeria ivanovii). Functional complementation was achieved by expression of choE from pVK173-T, a pAL5000 derivative conferring hygromycin resistance. Our data demonstrate that ChoE is an important cytolytic factor for R. equi. The highly efficient targeted mutagenesis procedure that we used to generate choE isogenic mutants will be a valuable tool for the molecular analysis of R. equi virulence.

A complex multienzyme system encoded by five polyketide synthase genes is involved in the biosynthesis of the 26-membered polyene macrolide pimaricin in Streptomyces natalensis

BACKGROUND

Polyene macrolides are a class of large macrocyclic polyketides that interact with membrane sterols, having antibiotic activity against fungi but not bacteria. Their rings include a chromophore of 3-7 conjugated double bonds which constitute the distinct polyene structure. Pimaricin is an archetype polyene, important in the food industry as a preservative to prevent mould contamination of foods, produced by Streptomyces natalensis. We set out to clone, sequence and analyse the gene cluster responsible for the biosynthesis of this tetraene.

RESULTS

A large cluster of 16 open reading frames spanning 84985 bp of the S. natalensis genome has been sequenced and found to encode 13 homologous sets of enzyme activities (modules) of a polyketide synthase (PKS) distributed within five giant multienzyme proteins (PIMS0-PIMS4). The total of 60 constituent active sites, 25 of them on a single enzyme (PIMS2), make this an exceptional multienzyme system. Eleven additional genes appear to govern modification of the polyketide-derived framework and export. Disruption of the genes encoding the PKS abolished pimaricin production.

CONCLUSIONS

The overall architecture of the PKS gene cluster responsible for the biosynthesis of the 26-membered polyene macrolide pimaricin has been determined. Eleven additional tailoring genes have been cloned and analysed. The availability of the PKS cluster will facilitate the generation of designer pimaricins by combinatorial biosynthesis approaches. This work represents the extensive description of a second polyene macrolide biosynthetic gene cluster after the one for the antifungal nystatin.

Cholesterol oxidase: sources, physical properties and analytical applications

Since Flegg (H.M. Flegg, An investigation of the determination of serum cholesterol by an enzymatic method, Ann. Clin. Biochem. 10 (1973) 79-84) and Richmond (W. Richmond, The development of an enzymatic technique for the assay of cholesterol in biological fluids, Scand. J. clin. Lab. Invest. 29 (1972) 25; W. Richmond, Preparation and properties of a bacterial cholesterol oxidase from Nocardia sp. and its application to enzyme assay of total cholesterol in serum, Clinical Chemistry 19 (1973) 1350-1356) first illustrated the suitability of cholesterol oxidase (COD) for the analysis of serum cholesterol, COD has risen to become the most widely used enzyme in clinical laboratories with the exception of glucose oxidase (GOD). The use is widespread because assays incorporating the enzyme are extremely simple, specific, and highly sensitive and thus offer distinct advantages over the Liebermann-Burchard analytical methodologies which employ corrosive reagents and can be prone to unreliable results due to interfering substances such as bilirubin. Individuals can now readily determine their own serum cholesterol levels with a simple disposable test kit. This review discusses COD in some detail and includes the topics: (1) The variety of bacterial sources available; (2) The various extraction/purification protocols utilised in order to obtain protein of sufficient clarification (purity) for use in food/clinical analysis; (3) Significant differences in the properties of the individual enzymes; (4) Substrate specificities of the various enzymes; (5) Examples of biological assays which have employed cholesterol oxidase as an integral part of the analysis, and the various assay protocols; (6) New steroidal products of COD. This review is not a comprehensive description of published work, but is intended to provide an account of recent and current research, and should promote further interest in the application of enzymes to analytical selectivity.

Crystal structure determination of cholesterol oxidase from Streptomyces and structural characterization of key active site mutants

Cholesterol oxidase is a monomeric flavoenzyme which catalyzes the oxidation and isomerization of cholesterol to cholest-4-en-3-one. The enzyme interacts with lipid bilayers in order to bind its steroid substrate. The X-ray structure of the enzyme from Brevibacterium sterolicum revealed two loops, comprising residues 78-87 and residues 433-436, which act as a lid over the active site and facilitate binding of the substrate [Vrielink et al. (1991) J. Mol. Biol. 219, 533-554; Li et al. (1993) Biochemistry 32, 11507-11515]. It was postulated that these loops must open, forming a hydrophobic channel between the membrane and the active site of the protein and thus sequestering the cholesterol substrate from the aqueous environment. Here we describe the three-dimensional structure of the homologous enzyme from Streptomyces refined to 1.5 A resolution. Structural comparisons to the enzyme from B. sterolicum reveal significant conformational differences in these loop regions; in particular, a region of the loop comprising residues 78-87 adopts a small amphipathic helical turn with hydrophobic residues directed toward the active site cavity and hydrophilic residues directed toward the external surface of the molecule. It seems reasonable that this increased rigidity reduces the entropy loss that occurs upon binding substrate. Consequently, the Streptomyces enzyme is a more efficient catalyst. In addition, we have determined the structures of three active site mutants which have significantly reduced activity for either the oxidation (His447Asn and His447Gln) or the isomerization (Glu361Gln). Our structural and kinetic data indicate that His447 and Glu361 act as general base catalysts in association with conserved water H2O541 and Asn485. The His447, Glu361, H2O541, and Asn485 hydrogen bond network is conserved among other oxidoreductases. This catalytic tetrad appears to be a structural motif that occurs in flavoenzymes that catalyze the oxidation of unactivated alcohols.

Evaluation of the role of His447 in the reaction catalyzed by cholesterol oxidase

Cholesterol oxidase catalyzes the oxidation and isomerization of cholesterol to cholest-4-en-3-one via cholest-5-en-3-one. It has been proposed that His447 acts as the general base catalyst for oxidation, and that the resulting imidazolium ion formed acts as an electrophile for isomerization. In this work, we undertook an assessment of the proposed dual roles of His447 in the oxidation and isomerization reactions. To test its role, we constructed five mutants, H447Q, H447N, H447E, H447D, and H447K, that introduce hydrogen bond donors and acceptors and carboxylate bases at this position, and a sixth mutant, E361Q, to test the interplay between His447 and Glu361. These mutants were characterized using steady-state kinetics and deuterium substrate and solvent isotope effects. For those mutants that catalyze either oxidation of cholesterol or isomerization of cholest-5-en-3-one, the Km's vary no more than 3-fold relative to wild type. H447K is inactive in both oxidation (> 100,000-fold reduced) and isomerization assays (> 10,000-fold reduced). H447E and H447D do not catalyze oxidation (> 100,000-fold reduced), but do catalyze isomerization, 10(4) times slower than wild type. The k(cat) for H447Q is 120-fold lower than wild type for oxidation, and the same as wild type for isomerization. The k(cat) for H447N is 4400-fold lower than wild type for oxidation, and is 30-fold lower than wild type for isomerization. E361Q does not catalyze isomerization (> 10,000-fold reduced), and the k(cat) for oxidation is 30-fold lower than wild type. The substrate deuterium kinetic isotope effects for the wild-type and mutant-catalyzed oxidation reactions suggest that mutation of His447 to an amide results in a change of the rate-determining step from hydride transfer to hydroxyl deprotonation. The deuterium solvent and substrate kinetic isotope effects for isomerization indicate that an amide at position 447 is an effective electrophile to catalyze formation of a dienolic intermediate. Moreover, consideration of kinetic and structural results together suggests that a hydrogen bonding network involving His447, Glu361 and Asn485, Wat541, and substrate serves to position the substrate and coordinate general base and electrophilic catalysis. That is, in addition to its previously demonstrated role as base for deprotonation of carbon-4 during isomerization, Glu361 has a structural role and may act as a general base during oxidation. The His447, Asn485, Glu361, and Wat541 residues are conserved in other GMC oxidoreductases. Observation of this catalytic tetrad in flavoproteins of unknown function may be diagnostic for an ability to oxidize unactivated alcohols.

The importance of GLU361 position in the reaction catalyzed by cholesterol oxidase

Cholesterol oxidase stereospecifically isomerizes cholest-5-en-3-one to cholest-4-en-3-one. When the base catalyst for isomerization, Glu361, is mutated to Asp, the rate of deprotonation of cholest-5-en-3-one is not affected, but protonation of the dienolic intermediate becomes rate-limiting. This may be a consequence of the large distance between the catalytic base and carbon-6 of the intermediate in the mutant enzyme.

Cloning and heterologous expression of the gene for BLIP-II, a beta-lactamase-inhibitory protein from Streptomyces exfoliatus SMF19

A beta-lactamase-inhibitory protein (BLIP-II) was purified from the culture filtrate of Streptomyces exfoliatus SMF 19 and its N-terminal amino acid sequence was determined. A clone containing the gene encoding BLIP-II (bliB) was selected from a cosmid library by colony hybridization using an oligonucleotide probe based on the N-terminal amino acid sequence of BLIP-II. The bliB gene was isolated and sequenced. Analysis of the nucleotide sequence revealed that the gene consists of 1116 bp and encodes a mature protein of 332 amino acids preceded by a 40 amino acid signal sequence. bliB, expressed under the control of the T7 promoter in Escherichia coli, was accumulated in an inactive form in inclusion bodies, but beta-lactamase-inhibitory activity was recovered after refolding. In addition, bliB was heterologously expressed in Streptomyces lividans TK24 using the melC1 promoter. The BLIP-II protein produced in recombinant strains of S. lividans was secreted into the culture supernatant in a biologically active form.

Assessment of the role of an omega loop of cholesterol oxidase: a truncated loop mutant has altered substrate specificity

The function of an active site loop (70-90) of cholesterol oxidase has been ascertained by deleting five contiguous residues (79-83) from the tip of the loop. From the crystal structure of the wild-type enzyme, it appears that this truncation will not significantly perturb the structure of the rest of the enzyme. The UV/vis and CD spectra of the mutant confirm that the enzyme is properly folded with FAD bound. The mutant enzyme still transfers 2H from the 4beta-carbon of the intermediate, cholest-5-en-3-one, to the 6beta-carbon of the product, cholest-4-en-3-one, during isomerization. The kcat/Km of the mutant is increased 6-fold with dehydroepiandrosterone as substrate. Thus, the enzyme is still catalytically active after deletion of the five loop-tip residues. With micellar cholesterol, the kcat/Km of the mutant is decreased 170-fold relative to wild type. This suggests that the tip of the loop is necessary for packing with the "tail" of cholesterol and is responsible for substrate specificity at C17. Increased release of intermediate cholest-5-en-3-one in the mutant-catalyzed reaction is not observed. Truncation of the loop, therefore, does not affect the grip of the enzyme on the intermediate. With lipid vesicle substrates (egg phosphatidylcholine/cholesterol, 1:1), the initial velocity of the mutant is reduced 3000-fold. The binding affinity for the vesicles, however, is only reduced 2-fold. Consequently, the loop is not the primary determinant of binding affinity for vesicles. It is concluded that the loop is important for movement of cholesterol from the lipid bilayer. The tip residues form a hydrophobic pathway between lipid membrane and active site to facilitate movement of substrate and product in to and out of the active site.

Characterization of cholesterol oxidase from Streptomyces hygroscopicus and Brevibacterium sterolicum

The FAD-containing enzyme cholesterol oxidase catalyzes the oxidation and isomerization of 3beta-hydroxysteroids having a trans double bond at delta5-delta6 of the steroid ring backbone to the corresponding delta4-3-ketosteroid. Two representative enzymes of this family, namely cholesterol oxidase from Streptomyces hygroscopicus (SCO) and the recombinant enzyme from Brevibacterium sterolicum (BCO) expressed in Escherichia coli, have been characterized herein in their chemical, physical, and biochemical properties. In the native form, both enzymes are monomeric (55 kDa), acidic (pI 4.4-5.1) and contain oxidized FAD (peaks in the 370-390-nm and 440-470-nm regions). Marked differences exist between the oxidized, reduced, and (red) anion semiquinone spectra of the two enzymes, suggesting substantial differences in the flavin microenvironment. Both enzymes form reversibly flavin N(5)-sulfite adducts via measurable k(on) and k(off) steps. BCO has a higher affinity for sulfite (Kd approximately 0.14 mM) compared to SCO (approximately 24 mM). This correlates well with the midpoint redox potentials of the bound flavin, which in the case of BCO are about 100 mV more positive than for SCO. Both enzymes show a high pKa (approximately 11.0) for the N(3) position of FAD. With both enzymes, the rearrangement of 5-cholesten-3-one to 4-cholesten-3-one is not rate limiting indicating that the rate-limiting step of the overall reaction is not the isomerization. The absence of the double bond in the steroid molecule does not significantly affect turnover and affinity for the substrate, whereas both these parameters are affected by a decreasing length of the substrate C17 chain.

Characterization of methyltransferase and hydroxylase genes involved in the biosynthesis of the immunosuppressants FK506 and FK520

FK506 and FK520 are 23-membered macrocyclic polyketides with potent immunosuppressive and antifungal activities. The gene encoding 31-O-demethyl-FK506 methyltransferase, fkbM, was isolated from Streptomyces sp. strains MA6858 and MA6548, two FK506 producers, and Streptomyces hygroscopicus subsp. ascomyceticus, an FK520 producer. The nucleotide sequence of the fkbM gene revealed an open reading frame encoding a polypeptide of 260 amino acids. Disruption of fkbM in Streptomyces sp. strain MA6548 yielded a mutant that produced 31-O-demethyl-FK506, confirming the involvement of the isolated genes in the biosynthesis of FK506 and FK520. Heterologous expression of fkbM in Streptomyces lividans established that fkbM encodes an O-methyltransferase catalyzing the methylation of the C-31 hydroxyl group of 31-O-demethyl-FK506 and FK520. A second open reading frame, fkbD, was found upstream of fkbM in all three aforementioned species and was predicted to encode a protein of 388 residues that showed a strong resemblance to cytochrome P-450 hydroxylases. Disruption of fkbD had a polar effect on the synthesis of the downstream fkbM gene product and resulted in the formation of 9-deoxo-31-O-demethyl-FK506. This established the product of fkbD as the cytochrome P-450 9-deoxo-FK506 hydroxylase, which is responsible for hydroxylation at position C-9 of the FK506 and FK520 macrolactone ring.

Molecular cloning, expression in Streptomyces lividans, and analysis of a gene cluster from Arthrobacter simplex encoding 3-ketosteroid-delta 1-dehydrogenase, 3-ketosteroid-delta 5-isomerase and a hypothetical regulatory protein

The Arthrobacter simplex gene coding for 3-ketosteroid-delta 1-dehydrogenase, a key enzyme in the degradation of the steroid nucleus, was cloned in Streptomyces lividans. Nucleotide sequence analysis revealed that the gene for 3-ketosteroid-delta 1-dehydrogenase (ksdD) is clustered with at least two more genes possibly involved in steroid metabolism. Upstream of ksdD, we found a gene, ksdR, encoding a hypothetical regulatory protein that shows homologies to KdgR, the negative regulator of pectin biodegradation in Erwinia, and GyIR, the activator for glycerol metabolism in Steptomyces. A helix-turn-helix DNA-binding domain can be predicted at similar positions near the N-terminal of KsdR, KdgR and GyIR. ksdl adjoining downstream to ksdD codes for a protein that has strong similarities to 3-ketosteroid-delta 5-isomerases. The highly conserved Tyr and Asp residues are present in the active-centre motif of the enzyme. The translated ksdD gene product was found to be similar to the 3-ketosteroid-delta 1-dehydrogenase of Pseudomonas testosteroni and to the fumarate reductase of Shewanella putrefaciens. A region highly conserved between the two steroid dehydrogenases can be aligned to the active-centre motif of the fumarate reductase. S. lividans strains carrying the ksdD gene overexpressed 3-ketosteroid-delta 1-dehydrogenase. The expression of 3-ketosteroid-delta 5-isomerase, however, was barely detectable in recombinant S. lividans strains carrying the ksdl gene, or in the parental Arthrobacter strain.