Gene components responsible for discrete substrate specificity in the metabolism of biphenyl (bph operon) and toluene (tod operon)

The NADH recycling enzymes TsaC and TsaD regenerate reducing equivalents for Rieske oxygenase chemistry

Many microorganisms use both biological and nonbiological molecules as sources of carbon and energy. This resourcefulness means that some microorganisms have mechanisms to assimilate pollutants found in the environment. One such organism is Comamonas testosteroni, which metabolizes 4-methylbenzenesulfonate and 4-methylbenzoate using the TsaMBCD pathway. TsaM is a Rieske oxygenase, which in concert with the reductase TsaB consumes a molar equivalent of NADH. Following this step, the annotated short-chain dehydrogenase/reductase and aldehyde dehydrogenase enzymes TsaC and TsaD each regenerate a molar equivalent of NADH. This co-occurrence ameliorates the need for stoichiometric addition of reducing equivalents and thus represents an attractive strategy for integration of Rieske oxygenase chemistry into biocatalytic applications. Therefore, in this work, to overcome the lack of information regarding NADH recycling enzymes that function in partnership with Rieske non-heme iron oxygenases (Rieske oxygenases), we solved the X-ray crystal structure of TsaC to a resolution of 2.18 Å. Using this structure, a series of substrate analog and protein variant combination reactions, and differential scanning fluorimetry experiments, we identified active site features involved in binding NAD+ and controlling substrate specificity. Further in vitro enzyme cascade experiments demonstrated the efficient TsaC- and TsaD-mediated regeneration of NADH to support Rieske oxygenase chemistry. Finally, through in-depth bioinformatic analyses, we illustrate the widespread co-occurrence of Rieske oxygenases with TsaC-like enzymes. This work thus demonstrates the utility of these NADH recycling enzymes and identifies a library of short-chain dehydrogenase/reductase enzyme prospects that can be used in Rieske oxygenase pathways for in situ regeneration of NADH.

Rieske Oxygenases and Other Ferredoxin-Dependent Enzymes: Electron Transfer Principles and Catalytic Capabilities

Enzymes that depend on sophisticated electron transfer via ferredoxins (Fds) exhibit outstanding catalytic capabilities, but despite decades of research, many of them are still not well understood or exploited for synthetic applications. This review aims to provide a general overview of the most important Fd-dependent enzymes and the electron transfer processes involved. While several examples are discussed, we focus in particular on the family of Rieske non-heme iron-dependent oxygenases (ROs). In addition to illustrating their electron transfer principles and catalytic potential, the current state of knowledge on structure-function relationships and the mode of interaction between the redox partner proteins is reviewed. Moreover, we highlight several key catalyzed transformations, but also take a deeper dive into their engineerability for biocatalytic applications. The overall findings from these case studies highlight the catalytic capabilities of these biocatalysts and could stimulate future interest in developing additional Fd-dependent enzyme classes for synthetic applications.

Differential Roles of Three Different Upper Pathway meta Ring Cleavage Product Hydrolases in the Degradation of Dibenzo-p-Dioxin and Dibenzofuran by Sphingomonas wittichii Strain RW1

Sphingomonas wittichii RW1 grows on the two related compounds dibenzofuran (DBF) and dibenzo-p-dioxin (DXN) as the sole source of carbon. Previous work by others (P. V. Bunz, R. Falchetto, and A. M. Cook, Biodegradation 4:171-178, 1993, https://doi/org/10.1007/BF00695119) identified two upper pathway meta cleavage product hydrolases (DxnB1 and DxnB2) active on the DBF upper pathway metabolite 2-hydroxy-6-oxo-6-(2-hydroxyphenyl)-hexa-2,4-dienoate. We took a physiological approach to determine the role of these two enzymes in the degradation of DBF and DXN by RW1. Single knockouts of either plasmid-located dxnB1 or chromosome-located dxnB2 had no effect on RW1 growth on either DBF or DXN. However, a double-knockout strain lost the ability to grow on DBF but still grew normally on DXN, demonstrating that DxnB1 and DxnB2 are the only hydrolases involved in the DBF upper pathway. Using a transcriptomics-guided approach, we identified a constitutively expressed third hydrolase encoded by the chromosomally located SWIT0910 gene. Knockout of SWIT0910 resulted in a strain that no longer grows on DXN but still grows normally on DBF. Thus, the DxnB1 and DxnB2 hydrolases function in the DBF but not the DXN catabolic pathway, and the SWIT0190 hydrolase functions in the DXN but not the DBF catabolic pathway. IMPORTANCE S. wittichii RW1 is one of only a few strains known to grow on DXN as the sole source of carbon. Much of the work deciphering the related RW1 DXN and DBF catabolic pathways has involved genome gazing, transcriptomics, proteomics, heterologous expression, and enzyme purification and characterization. Very little research has utilized physiological techniques to precisely dissect the genes and enzymes involved in DBF and DXN degradation. Previous work by others identified and extensively characterized two RW1 upper pathway hydrolases. Our present work demonstrates that these two enzymes are involved in DBF but not DXN degradation. In addition, our work identified a third constitutively expressed hydrolase that is involved in DXN but not DBF degradation. Combined with our previous work (T. Y. Mutter and G. J. Zylstra, Appl Environ Microbiol 87:e02464-20, 2021, https://doi.org/10.1128/AEM.02464-20), this means that the RW1 DXN upper pathway involves genes from three very different locations in the genome, including an initial plasmid-encoded dioxygenase and a ring cleavage enzyme and hydrolase encoded on opposite sides of the chromosome.

Hydrocarbon-degrading genes in root endophytic communities on oil sands reclamation covers

In response to environmental regulations, the Canadian oil sands industry aims to reclaim all disturbed areas to equivalent land capability prior to mining operations. However, tailing sands used in reclamation contain residual hydrocarbons and plants growing in these areas may rely on hydrocarbon-degrading endophytic bacteria to survive. This study assessed the hydrocarbon-degrading potential (genes: CYP153, alkB and nah) of culturable and unculturable endophytic bacteria associated with annual barley (Hordeum vulgare) and sweet clover (Melilotus albus) plants in an oil sands reclamation area. Our results suggest higher CYP153 gene copy numbers in sweet clover when compared to barley. Yet, no significant differences were detected in 16S rRNA, alkB and nah genes. In addition, total hydrocarbons, pH, total soil carbon, organic carbon and total nitrogen play an important role in determining hydrocarbon-degrading potential in these communities. The assessment of culturable hydrocarbon-degrading bacteria revealed 42 isolates (total of 316) that were positive for at least one hydrocarbon-degrading gene. Most of these isolates were positive for alkB, and closely match the database for Pantoea, Pseudomonas and Enterobacter spp. Thus, to improve oil sands reclamation strategies, plant inoculation with select hydrocarbon-degrading endophytes could be used to increase plant tolerance and hydrocarbon degradation in these areas.

Some facts about the respiratory enzymes of Pseudomonas pseudoalcaligenes KF707 recently renamed as Pseudomonas furukawaii sp. nov., type strain KF707

Kimura and co-workers (Kimura N et al. Int J Syst Evol Microbiol 2018;68:1429-1435) recently proposed renaming the obligate aerobe Pseudomonas pseudoalcaligenes KF707 as Pseudomonas furukawiisp. nov. type strain KF707. Since the first quasi-complete genome sequence of KF707 was reported in 2012 (accession number: PRJNA83639) numerous reports on chemotaxis and function/composition of the respiratory redox chain of KF707 have been published, demonstrating that KF707 contains three cheA genes for aerobic motility, four cytochrome oxidases of c(c)aa3- and cbb3-type and one bd-type quinol oxidase. With this background in mind, it has been quite a surprise to read within Table 1 of the paper by Kimura et al. that strain KF707 is phenotypically characterized as cytochrome oxidase-negative. Further, Table 1 also reports that KF707 is β-galactosidase-positive, an affirmation that is not consistent with results documented in the current literature. In this present 'Letter to the Editor' we show that Kimura et al. have contradicted themselves and provided inaccurate information in respect to the respiratory phenotypic features of P. furukawii. Based on this, an official corrigendum is requested since the publication, as it is, blurs the credibility of the International Journal of Systematic and Evolutionary Microbiology.

Biphenyl Modulates the Expression and Function of Respiratory Oxidases in the Polychlorinated-Biphenyls Degrader Pseudomonas pseudoalcaligenes KF707

Pseudomonas pseudoalcaligenes KF707 is a soil bacterium which is known for its capacity to aerobically degrade harmful organic compounds such as polychlorinated biphenyls (PCBs) using biphenyl as co-metabolite. Here we provide the first genetic and functional analysis of the KF707 respiratory terminal oxidases in cells grown with two different carbon sources: glucose and biphenyl. We identified five terminal oxidases in KF707: two c(c)aa₃ type oxidases (Caa₃ and Ccaa₃), two cbb₃ type oxidases (Cbb₃1 and Cbb₃2), and one bd type cyanide-insensitive quinol oxidase (CIO). While the activity and expression of both Cbb₃1 and Cbb₃2 oxidases was prevalent in glucose grown cells as compared to the other oxidases, the activity and expression of the Caa₃ oxidase increased considerably only when biphenyl was used as carbon source in contrast to the Cbb₃2 oxidase which was repressed. Further, the respiratory activity and expression of CIO was up-regulated in a Cbb₃1 deletion strain as compared to W.T. whereas the CIO up-regulation was not present in Cbb₃2 and C(c)aa₃ deletion mutants. These results, together, reveal that both function and expression of cbb₃ and caa₃ type oxidases in KF707 are modulated by biphenyl which is the co-metabolite needed for the activation of the PCBs-degradation pathway.

The use of phosphomannose isomerase selection system for Agrobacterium-mediated transformation of tobacco and flax aimed for phytoremediation

A plant selection system based on the phosphomannose isomerase gene (pmi) as a selectable marker is often used to avoid selection using antibiotic resistance. Nevertheless, pmi gene is endogenous in several plant species and therefore difficult to use in such cases. Here we evaluated and compared Agrobacterium-mediated transformation of Linum usitatissimum breeding line AGT-952 (without endogenous pmi gene) and Nicotiana tabacum var. WSC-38 (with endogenous pmi gene). Transformation was evaluated for vectors bearing transgenes that have the potential to be involved in improved phytoremediation of contaminated environment. Tobacco regenerants selection resulted in 6.8% transformation efficiency when using a medium supplemented with 30 g/L mannose with stepwise decrease of the sucrose concentration. Similar transformation efficiency (5.3%) was achieved in transformation of flax. Relatively low selection efficiency was achieved (12.5% and 34.8%, respectively). The final detection of efficient pmi selection was conducted using PCR and the non-endogenous genes; pmi transgene for flax and todC2 transgene for tobacco plants.

The ICEXTD of Azoarcus sp. CIB, an integrative and conjugative element with aerobic and anaerobic catabolic properties

Integrative and conjugative elements (ICE) play a major role in aerobic degradation of aromatic compounds, but they have not yet been shown to be involved in anaerobic degradation. We have characterized here the ICE_XTD element which endows to the beta-proteobacterium Azoarcus sp. CIB with the ability to utilize aromatic hydrocarbons. The core region of ICE_XTD , which shows a remarkable synteny with that of ICEclc-like elements, allows its own intracellular and intercellular mobility. ICE_XTD integrates at the tRNAGly of the host chromosome, but it can also excise to produce a ready to transfer circular form. The adaptation modules of ICE_XTD represent a unique combination of gene clusters for aerobic (tod genes) and anaerobic (bss-bbs and mbd genes) degradation of certain aromatic hydrocarbons, e.g., toluene, m-xylene and cumene. Transfer of ICE_XTD to other Azoarcus strains, e.g., A. evansii, confers them the ability to degrade aromatic hydrocarbons both aerobically and anaerobically. Interestingly, ICE_XTD allows Cupriavidus pinatubonensis, a bacterium unable to degrade anaerobically aromatic compounds, to grow with m-xylene under anoxic conditions. Thus, ICE_XTD constitutes the first mobile genetic element able to expand the catabolic abilities of certain bacteria for the removal of aromatic hydrocarbons either in the presence or absence of oxygen.

An aryl dioxygenase shows remarkable double dioxygenation capacity for diverse bis-aryl compounds, provided they are carbocyclic

The bacterial dioxygenation of mono- or polycyclic aromatic compounds is an intensely studied field. However, only in a few cases has the repeated dioxygenation of a substrate possessing more than a single aromatic ring been described. We previously characterized the aryl-hydroxylating dioxygenase BphA-B4h, an artificial hybrid of the dioxygenases of the biphenyl degraders Burkholderia xenovorans LB400 and Pseudomonas sp. strain B4-Magdeburg, which contains the active site of the latter enzyme, as an exceptionally powerful biocatalyst. We now show that this dioxygenase possesses a remarkable capacity for the double dioxygenation of various bicyclic aromatic compounds, provided that they are carbocyclic. Two groups of biphenyl analogues were examined: series A compounds containing one heterocyclic aromatic ring and series B compounds containing two homocyclic aromatic rings. Whereas all of the seven partially heterocyclic biphenyl analogues were solely dioxygenated in the homocyclic ring, four of the six carbocyclic bis-aryls were converted into ortho,meta-hydroxylated bis-dihydrodiols. Potential reasons for failure of heterocyclic dioxygenations are discussed. The obtained bis-dihydrodiols may, as we also show here, be enzymatically re-aromatized to yield the corresponding tetraphenols. This opens a way to a range of new polyphenolic products, a class of compounds known to exert multiple biological activities. Several of the obtained compounds are novel molecules.

BTEX biodegradation and its nitrogen removal potential by a newly isolatedPseudomonasthivervalensisMAH1

Benzene, toluene, ethylbenzene, and xylene (BTEX) are of great environmental concern because of their widespread occurrence in groundwater and soil, posing an increasing threat to human health. The aerobic denitrifying BTEX-degrading bacterium Pseudomonas thivervalensis MAH1 was isolated from BTEX-contaminated sediment under nitrate-reducing conditions. The degradation rates of benzene, toluene, ethylbenzene, and xylene by strain MAH1 were 4.71, 6.59, 5.64, and 2.59 mg·L−1·day−1, respectively. The effects of sodium citrate, nitrate, and NaH2PO4on improving BTEX biodegradation were investigated, and their optimum concentrations were 0.5 g·L−1, 100 mg·L−1, and 0.8 mmol·L−1, respectively. Moreover, MAH1, which has nirS and nosZ genes, removed ammonium, nitrate, and nitrite at 2.49 mg NH4+-N·L−1·h−1, 1.50 mg NO3−-N·L−1·h−1, and 0.83 mg NO2−-N·L−1·h−1, respectively. MAH1 could help in mitigating the pollution caused by nitrogen amendments for biostimulation. This study highlighted the feasibility of using MAH1 for the bioremediation of BTEX-contaminated sites.

Bioremediation in marine ecosystems: a computational study combining ecological modeling and flux balance analysis

The pressure to search effective bioremediation methodologies for contaminated ecosystems has led to the large-scale identification of microbial species and metabolic degradation pathways. However, minor attention has been paid to the study of bioremediation in marine food webs and to the definition of integrated strategies for reducing bioaccumulation in species. We propose a novel computational framework for analysing the multiscale effects of bioremediation at the ecosystem level, based on coupling food web bioaccumulation models and metabolic models of degrading bacteria. The combination of techniques from synthetic biology and ecological network analysis allows the specification of arbitrary scenarios of contaminant removal and the evaluation of strategies based on natural or synthetic microbial strains. In this study, we derive a bioaccumulation model of polychlorinated biphenyls (PCBs) in the Adriatic food web, and we extend a metabolic reconstruction of Pseudomonas putida KT2440 (iJN746) with the aerobic pathway of PCBs degradation. We assess the effectiveness of different bioremediation scenarios in reducing PCBs concentration in species and we study indices of species centrality to measure their importance in the contaminant diffusion via feeding links. The analysis of the Adriatic sea case study suggests that our framework could represent a practical tool in the design of effective remediation strategies, providing at the same time insights into the ecological role of microbial communities within food webs.

Correction of sequence-dependent ambiguous bases (Ns) from the 454 pyrosequencing system

Pyrosequencing of the 16S ribosomal RNA gene (16S) has become one of the most popular methods to assess microbial diversity. Pyrosequencing reads containing ambiguous bases (Ns) are generally discarded based on the assumptions of their non-sequence-dependent formation and high error rates. However, taxonomic composition differed by removal of reads with Ns. We determined whether Ns from pyrosequencing occur in a sequence-dependent manner. Our reads and the corresponding flow value data revealed occurrence of sequence-specific N errors with a common sequential pattern (a homopolymer + a few nucleotides with bases other than the homopolymer + N) and revealed that the nucleotide base of the homopolymer is the true base for the following N. Using an algorithm reflecting this sequence-dependent pattern, we corrected the Ns in the 16S (86.54%), bphD (81.37%) and nifH (81.55%) amplicon reads from a mock community with high precisions of 95.4, 96.9 and 100%, respectively. The new N correction method was applicable for determining most of Ns in amplicon reads from a soil sample, resulting in reducing taxonomic biases associated with N errors and in shotgun sequencing reads from public metagenome data. The method improves the accuracy and precision of microbial community analysis and genome sequencing using 454 pyrosequencing.

Protein-protein interactions and substrate channeling in orthologous and chimeric aldolase-dehydrogenase complexes

Bacterial aldolase-dehydrogenase complexes catalyze the last steps in the meta cleavage pathway of aromatic hydrocarbon degradation. The aldolase (TTHB246) and dehydrogenase (TTHB247) from Thermus thermophilus were separately expressed and purified from recombinant Escherichia coli. The aldolase forms a dimer, while the dehydrogenase is a monomer; these enzymes can form a stable tetrameric complex in vitro, consisting of two aldolase and two dehydrogenase subunits. Upon complex formation, the K(m) value of 4-hydroxy-2-oxopentanoate, the substrate of TTHB246, is decreased 4-fold while the K(m) of acetaldehyde, the substrate of TTHB247, is increased 3-fold. The k(cat) values of each enzyme were reduced by ~2-fold when they were in a complex. The half-life of TTHB247 at 50 °C increased by ~4-fold when it was in a complex with TTHB246. The acetaldehyde product from TTHB246 could be efficiently channelled directly to TTHB247, but the channeling efficiency for the larger propionaldehyde was ~40% lower. A single A324G substitution in TTHB246 increased the channeling efficiency of propionaldehyde to a value comparable to that of acetaldehyde. Stable and catalytically competent chimeric complexes could be formed between the T. thermophilus enzymes and the orthologous aldolase (BphI) and dehydrogenase (BphJ) from the biphenyl degradation pathway of Burkholderia xenovorans LB400. However, channeling efficiencies for acetaldehyde in these chimeric complexes were ~10%. Structural and sequence analysis suggests that interacting residues in the interface of the aldolase-dehydrogenase complex are highly conserved among homologues, but coevolution of partner enzymes is required to fine-tune this interaction to allow for efficient substrate channeling.

Characterization of biphenyl dioxygenase sequences and activities encoded by the metagenomes of highly polychlorobiphenyl-contaminated soils

Total extracted DNA from two heavily polychlorobiphenyl-contaminated soils was analyzed with respect to biphenyl dioxygenase sequences and activities. This was done by PCR amplification and cloning of a DNA segment encoding the active site of the enzyme. The translated sequences obtained fell into three similarity clusters (I to III). Sequence identities were high within but moderate or low between the clusters. Members of clusters I and II showed high sequence similarities with well-known biphenyl dioxygenases. Cluster III showed low (43%) sequence identity with a biphenyl dioxygenase from Rhodococcus jostii RHA1. Amplicons from the three clusters were used to reconstitute and express complete biphenyl dioxygenase operons. In most cases, the resulting hybrid dioxygenases were detected in cell extracts of the recombinant hosts. At least 83% of these enzymes were catalytically active. Several amino acid exchanges were identified that critically affected activity. Chlorobiphenyl turnover by the enzymes containing the prototype sequences of clusters I and II was characterized with 10 congeners that were major, minor, or not constituents of the contaminated soils. No direct correlations were observed between on-site concentrations and rates of productive dioxygenations of these chlorobiphenyls. The prototype enzymes displayed markedly different substrate and product ranges. The cluster II dioxygenase possessed a broader substrate spectrum toward the assayed congeners, whereas the cluster I enzyme was superior in the attack of ortho-chlorinated aromatic rings. These results demonstrate the feasibility of the applied approach to functionally characterize dioxygenase activities of soil metagenomes via amplification of incomplete genes.

Growth of Pseudomonas putida F1 on styrene requires increased catechol-2,3-dioxygenase activity, not a new hydrolase

Pseudomonas putida F1 cannot grow on styrene despite being able to degrade it through the toluene degradation (tod) pathway. Previous work had suggested that this was because TodF, the meta-fission product (MFP) hydrolase, was unable to metabolize the styrene MFP 2-hydroxy-6-vinylhexa-2,4-dienoate. Here we demonstrate via kinetic and growth analyses that the substrate specificity of TodF is not the limiting factor preventing F1 from growing on styrene. Rather, we found that the metabolite 3-vinylcatechol accumulated during styrene metabolism and that micromolar concentrations of this intermediate inactivated TodE, the catechol-2,3-dioxygenase (C23O) responsible for its cleavage. Analysis of cells growing on styrene suggested that inactivation of TodE and the subsequent accumulation of 3-vinylcatechol resulted in toxicity and cell death. We found that simply overexpressing TodE on a plasmid (pTodE) was all that was necessary to allow F1 to grow on styrene. Similar results were also obtained by expressing a related C23O, DmpB from Pseudomonas sp. CF600, in tandem with its plant-like ferredoxin, DmpQ (pDmpQB). Further analysis revealed that the ability of F1 (pDmpQB) and F1 (pTodE) to grow on styrene correlated with increased C23O activity as well as resistance of the enzyme to 3-vinylcatechol-mediated inactivation. Although TodE inactivation by 3-halocatechols has been studied before, to our knowledge, this is the first published report demonstrating inactivation by a 3-vinylcatechol. Given the ubiquity of catechol intermediates in aromatic hydrocarbon metabolism, our results further demonstrate the importance of C23O inactivation as a determinant of growth substrate specificity.

Comparison of two metal-dependent pyruvate aldolases related by convergent evolution: substrate specificity, kinetic mechanism, and substrate channeling

HpaI and BphI are two pyruvate class II aldolases found in aromatic meta-cleavage degradation pathways that catalyze similar reactions but are not related in sequence. Steady-state kinetic analysis of the aldol addition reactions and product inhibition assays showed that HpaI exhibits a rapid equilibrium random order mechanism while BphI exhibits a compulsory order mechanism, with pyruvate binding first. Both aldolases are able to utilize aldehyde acceptors two to five carbons in length; however, HpaI showed broader specificity and had a preference for aldehydes containing longer linear alkyl chains or C2-OH substitutions. Both enzymes were able to bind 2-keto acids larger than pyruvate, but only HpaI was able to utilize both pyruvate and 2-ketobutanoate as carbonyl donors in the aldol addition reaction. HpaI lacks stereospecific control producing racemic mixtures of 4-hydroxy-2-oxopentanoate (HOPA) from pyruvate and acetaldehyde while BphI synthesizes only (4S)-HOPA. BphI is also able to utilize acetaldehyde produced by the reduction of acetyl-CoA catalyzed by the associated aldehyde dehydrogenase, BphJ. This aldehyde was directly channeled from the dehydrogenase to the aldolase active sites, with an efficiency of 84%. Furthermore, the BphJ reductive deacylation reaction increased 4-fold when BphI was catalyzing the aldol addition reaction. Therefore, the BphI-BphJ enzyme complex exhibits unique bidirectionality in substrate channeling and allosteric activation.

Characterization of an aldolase-dehydrogenase complex that exhibits substrate channeling in the polychlorinated biphenyls degradation pathway

An aldolase and dehydrogenase complex from the polychlorinated biphenyl degradation pathway of the bacterium Burkholderia xenovorans LB400 was purified. The aldolase, BphI, had the highest activity with Mn(2+) as the cofactor and was able to transform 4-hydroxy-2-oxopentanoate and 4-hydroxy-2-oxohexanoate to pyruvate and acetaldehyde or propionaldehyde with similar specificity constants. Aldolase activity was competitively inhibited by the pyruvate enolate analogue, oxalate, with a K(ic) of 0.93 microM. The pH-rate profiles suggested the involvement of a pK(a) 7.7 catalytic base in the reaction mechanism. BphI activity was activated 15-fold when substrate turnover was occurring in the dehydrogenase, BphJ, which can be attributed partially to nicotinamide coenzyme binding to BphJ. BphJ had similar specificity constants for acetaldehyde or propionaldehyde and was able to utilize aliphatic aldehydes from two to five carbons in length as substrates, although K(m) values for these aldehyes were >20 mM. When 4-hydroxy-2-oxopentanoate was provided as a substrate to the BphI-BphJ complex in a coupled enzyme assay, no lag in the progress curve of BphJ was observed. When 1 mM propionaldehyde was added exogenously to a reaction mixture containing 0.1 mM 4-hydroxy-2-oxopentanoate, 95% of the CoA esters produced was acetyl CoA. Conversely, 99% of the CoA esters produced was propionyl CoA when a 10-fold molar excess of exogenous acetaldehyde was added in a reaction mixture containing 4-hydroxy-2-oxohexanoate. These results demonstrate that acetaldehyde and propionaldehyde, products of the BphI reaction, are not released in the bulk solvent but are channeled directly to the dehydrogenase.

Biodegradation of aromatic compounds: an overview of meta-fission product hydrolases

Meta fission product (MFP) hydrolases catalyze hydrolysis of a low reactive carbon-carbon bond found in meta-fission products, generated during biodegradation of various aromatic compounds. These enzymes belong to the alpha/beta hydrolase super family and show structural conservation despite having poor sequence similarity. MFP-hydrolases are substrate specific and studies have indicated that this substrate specificity plays a key role in the determination of the organism's ability to degrade a particular substrate. In this concise review of MFP-hydrolases we discuss their classification, biochemical properties, the molecular basis of their substrate specificity, their catalytic mechanism, and evolutionary significance.

Enumeration of aromatic oxygenase genes to evaluate monitored natural attenuation at gasoline-contaminated sites

Monitoring groundwater benzene, toluene, ethylbenzene, and xylene (BTEX) concentrations is the typical method to assess monitored natural attenuation (MNA) and bioremediation as corrective actions at gasoline-contaminated sites. Conclusive demonstration of bioremediation, however, relies on converging lines of chemical and biological evidence to support a decision. In this study, real-time PCR quantification of aromatic oxygenase genes was used to evaluate the feasibility of MNA at two gasoline-impacted sites. Phenol hydroxylase (PHE), ring-hydroxylating toluene monooxygenase (RMO), naphthalene dioxygenase (NAH), toluene monooxygenase (TOL), toluene dioxygenase (TOD), and biphenyl dioxygenase (BPH4) genes were routinely detected in BTEX-impacted wells. Aromatic oxygenase genes were not detected in sentinel wells outside the plume indicating that elevated levels of oxygenase genes corresponded to petroleum hydrocarbon contamination. Total aromatic oxygenase gene copy numbers detected in impacted wells were on the order of 10(6)-10(9)copies L(-1). PHE, RMO, NAH, TOD, and BPH4 gene copies positively correlated to total BTEX concentration. Mann-Kendall analysis of benzene concentrations was used to evaluate the status of the dissolved BTEX plume. The combination of trend analysis of contaminant concentrations with quantification of aromatic oxygenase genes was used to assess the feasibility of MNA as corrective measures at both sites.

Bioremediation and monitoring of aromatic-polluted habitats

Bioremediation may restore contaminated soils through the broad biodegradative capabilities evolved by microorganisms towards undesirable organic compounds. Understanding bioremediation and its effectiveness is rapidly advancing, bringing available molecular approaches for examining the presence and expression of the key genes involved in microbial processes. These methods are continuously improving and require further development and validation of primer- and probe-based analyses and expansion of databases for alternative microbial markers. Phylogenetic marker approaches provide tools to determine which organisms are present or generally active in a community; functional gene markers provide only information concerning the distribution or transcript levels (deoxyribonucleic acid [DNA]- or messenger ribonucleic acid [mRNA]-based approaches) of specific gene populations across environmental gradients. Stable isotope probing methods offer great potential to identify microorganisms that metabolize and assimilate specific substrates in environmental samples, incorporating usually a rare isotope (i.e., (13)C) into their DNA and RNA. DNA and RNA in situ characterization allows the determination of the species actually involved in the processes being measured. DNA microarrays may analyze the expression of thousands of genes in a soil simultaneously. A global analysis of which genes are being expressed under various conditions in contaminated soils will reveal the metabolic status of microorganisms and indicate environmental modifications accelerating bioremediation.

Characterization of a C-C bond hydrolase from Sphingomonas wittichii RW1 with novel specificities towards polychlorinated biphenyl metabolites

Sphingomonas wittichii RW1 degrades chlorinated dibenzofurans and dibenzo-p-dioxins via meta cleavage. We used inverse PCR to amplify dxnB2, a gene encoding one of three meta-cleavage product (MCP) hydrolases identified in the organism that are homologues of BphD involved in biphenyl catabolism. Purified DxnB2 catalyzed the hydrolysis of 8-OH 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoate (HOPDA) approximately six times faster than for HOPDA at saturating substrate concentrations. Moreover, the specificity of DxnB2 for HOPDA (k(cat)/K(m) = 1.2 x 10(7) M(-1) s(-1)) was about half that of the BphDs of Burkholderia xenovorans LB400 and Rhodococcus globerulus P6, two potent polychlorinated biphenyl (PCB)-degrading strains. Interestingly, DxnB2 transformed 3-Cl and 4-OH HOPDAs, compounds that inhibit the BphDs and limit PCB degradation. DxnB2 had a higher specificity for 9-Cl HOPDA than for HOPDA but a lower specificity for 8-Cl HOPDA (k(cat)/K(m) = 1.7 x 10(6) M(-1) s(-1)), the chlorinated analog of 8-OH HOPDA produced during dibenzofuran catabolism. Phylogenetic analyses based on structure-guided sequence alignment revealed that DxnB2 belongs to a previously unrecognized class of MCP hydrolases, evolutionarily divergent from the BphDs although the physiological substrates of both enzyme types are HOPDAs. However, both classes of enzymes have mainly small hydrophobic residues lining the subsite that binds the C-6 phenyl of HOPDA, in contrast to the bulky hydrophobic residues (Phe106, Phe135, Trp150, and Phe197) found in the class II enzymes that prefer substrates possessing a C-6 alkyl. Thr196 and/or Asn203 appears to be an important determinant of specificity for DxnB2, potentially forming hydrogen bonds with the 8-OH substituent. This study demonstrates that the substrate specificities of evolutionarily divergent hydrolases may be useful for degrading mixtures of pollutants, such as PCBs.

Generation by a widely applicable approach of a hybrid dioxygenase showing improved oxidation of polychlorobiphenyls

Recently, a sequence-based approach has been developed for the fast isolation and characterization of class II aryl-hydroxylating dioxygenase activities (S. Kahl and B. Hofer, Microbiology 149:1475-1481, 2003). It comprises the PCR amplification of segments of alpha subunit genes of unknown sequence that encode the catalytic center and their fusion with sequences of the bphA gene cluster of Burkholderia xenovorans LB400. One of the resulting chimeric enzymes, harboring the core segment of a dioxygenase from Pseudomonas sp. strain B4-Magdeburg, has now been characterized with respect to the oxidation of chlorobiphenyls (CBs). Its substrate and product specificities differed favorably from those of the parental dioxygenase of strain LB400. The hybrid possessed a higher regiospecificity and yielded less unproductive dioxygenations at meta and para carbons. It attacked ortho-, meta-, and para-chlorinated rings with comparable efficiencies. It gave significantly higher yields in ortho,meta-dioxygenation of recalcitrant congeners containing a doubly ortho-chlorinated ring. While the parental enzyme yielded mainly unproductive meta, para dioxygenation of 2,5,4'-CB, the hybrid predominantly converted this congener into an ortho,meta-dioxygenated product. The subsequent enzymes of the LB400 catabolic pathway were able to transform most of the metabolites formed by the novel dioxygenase, indicating that the substrate ranges of these biocatalysts are not adapted to that of their initial pathway enzyme. Some of the catabolites, however, were identified as problematic for further degradation. Our results demonstrate that the outlined approach can successfully be applied to obtain novel dioxygenase specificities that favorably complement or supplement known ones.

A novel meta-cleavage product hydrolase from Flavobacterium sp. ATCC27551

The organophosphate degrading (opd) gene cluster of plasmid pPDL2 of Flavobacterium sp. ATCC27551 contains a novel open-reading frame, orf243. This was predicted to encode an alpha/beta hydrolase distantly related to the meta-fission product (MFP) hydrolases such as XylF, PhnD, and CumD. By homology modeling Orf243 has most of the structural features of MFP hydrolases including the characteristic active site catalytic triad. The purified protein (designated MfhA) is a homotetramer and shows similar affinity for 2-hydroxy-6-oxohepta-2,4-dienoate (HOHD), 2-hydroxymuconic semialdehyde (HMSA), and 2-hydroxy-5-methylmuconic semialdehyde (HMMSA), the meta-fission products of 3-methyl catechol, catechol, and 4-methyl catechol. The unique catalytic properties of MfhA and the presence near its structural gene of cis-elements required for transposition suggest that mfhA has evolved towards encoding a common hydrolase that can act on meta-fission products containing either aldehyde or ketone groups.

Improving the catalytic efficiency of a meta-cleavage product hydrolase (CumD) from Pseudomonas fluorescens IP01

The meta-cleavage product hydrolase from Pseudomonas fluorescens IP01 (CumD) hydrolyzes 2-hydroxy-6-oxo-7-methylocta-2,4-dienoate (6-isopropyl HODA) in the cumene (isopropylbenzene) degradation pathway. To modulate the substrate specificity and catalytic efficiency of CumD toward substrates derived from monocyclic aromatic compounds, we constructed the CumD mutants, A129V, I199V, and V227I, as well as four types of double and triple mutants. Toward substrates with smaller side chains (e.g. 2-hydroxy-6-oxohepta-2,4-dienoate; 6-ethyl-HODA), the k(cat)/K(m) values of the single mutants were 4.2-11 fold higher than that of the wild type enzyme and 1.8-4.7 fold higher than that of the meta-cleavage product hydrolase from Pseudomonas putida F1 (TodF). The A129V mutant showed the highest k(cat)/K(m) value for 2-hydroxy-6-oxohepta-2,4-dienoate (6-ethyl-HODA). The crystal structure of the A129V mutant was determined at 1.65 A resolution, enabling location of the Ogamma atom of the Ser103 side chain. A chloride ion was bound to the oxyanion hole of the active site, and mutant enzymes at the residues forming this site were also examined. The k(cat) values of Ser34 mutants were decreased 2.9-65 fold, suggesting that the side chain of Ser34 supports catalysis by stabilizing the anionic oxygen of the proposed intermediate state (gem-diolate). This is the first crystal structure determination of CumD in an active form, with the Ser103 residue, one of the catalytically essential "triad", being intact.

Soil microbial community responses to additions of organic carbon substrates and heavy metals (Pb and Cr)

Microcosm experiments were conducted with soils contaminated with heavy metals (Pb and Cr) and aromatic hydrocarbons to determine the effects of each upon microbial community structure and function. Organic substrates were added as a driving force for change in the microbial community. Glucose represented an energy source used by a broad variety of bacteria, whereas fewer soil species were expected to use xylene. The metal amendments were chosen to inhibit the acute rate of organic mineralization by either 50% or 90%, and lower mineralization rates persisted over the entire 31-day incubation period. Significant biomass increases were abolished when metals were added in addition to organic carbon. The addition of organic carbon alone had the most significant impact on community composition and led to the proliferation of a few dominant phylotypes, as detected by PCR-denaturing gradient gel electrophoresis of bacterial 16S rRNA genes. However, the community-wide effects of heavy metal addition differed between the two carbon sources. For glucose, either Pb or Cr produced large changes and replacement with new phylotypes. In contrast, many phylotypes selected by xylene treatment were retained when either metal was added. Members of the Actinomycetales were very prevalent in microcosms with xylene and Cr(VI); gene copy numbers of biphenyl dioxygenase and phenol hydroxylase (but not other oxygenases) were elevated in these microcosms, as determined by real-time PCR. Much lower metal concentrations were needed to inhibit the catabolism of xylene than of glucose. Cr(VI) appeared to be reduced during the 31-day incubations, but in the case of glucose there was substantial microbial activity when much of the Cr(VI) remained. In the case of xylene, this was less clear.

bph genes of the thermophilic PCB degrader, Bacillus sp. JF8: characterization of the divergent ring-hydroxylating dioxygenase and hydrolase genes upstream of the Mn-dependent BphC

Bacillussp. JF8 is a thermophilic polychlorinated biphenyl (PCB) degrader, which utilizes biphenyl and naphthalene. A thermostable, Mn-dependent 2,3-dihydroxybiphenyl 1,2-dioxygenase, BphC_JF8, has been characterized previously. Upstream ofbphCare five ORFs exhibiting low homology with, and a different gene order from, previously characterizedbphgenes. From the 5′ to 3′ direction the genes are: a putative regulatory gene (bphR), a hydrolase (bphD), the large and small subunits of a ring-hydroxylating dioxygenase(bphA1A2), and acis-diol dehydrogenase (bphB). Hybridization studies indicate that the genes are located on a plasmid. Ring-hydroxylating activity of recombinant BphA1A2_JF8 towards biphenyl, PCB, naphthalene and benzene was observed inEscherichia colicells, with complementation of non-specific ferredoxin and ferredoxin reductase by host cell proteins. PCB degradation by recombinant BphA1A2_JF8 showed that the congener specificity of the recombinant enzyme was similar toBacillussp. JF8. BphD_JF8, with an optimum temperature of 85 °C, exhibited a narrow substrate preference for 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoic acid. The Arrhenius plot of BphD_JF8 was biphasic, with two characteristic energies of activation and a break point at 47 °C.

Engineering a hybrid pseudomonad to acquire 3,4-dioxygenase activity for polychlorinated biphenyls

We constructed a hybrid strain that acquired 3,4-dioxygenase activity for polychlorinated biphenyls (PCBs). This strain, KF707-D34, possessed a chimeric biphenyl dioxygenase gene, of which a portion of bphA1 (coding for a large subunit of biphenyl dioxygenase) of Pseudomonas pseudoalcaligenes KF707 was replaced with that of a PCB-degrader, Burkholderia cepacia LB400 by homologous recombination. KF707-D34 retained the ability to degrade 4,4'-dichlorobiphenyl via 2,3-dioxygenation in a fashion identical to that of KF707 and gained novel capability to degrade 2,5,4'-trichlorobiphenyl and 2,5,2',5'-tetrachlorobiphenyl via 3,4-dioxygenation in a fashion identical to that of LB400. Sequence analysis of bphA1 from KF707-D34 revealed that three nucleotides in the 3'-terminal region of KF707 bphA1 were changed to correspond to those in LB400 bphA1. The resulting BphA1 protein in KF707-D34 was changed at position 376 from threonine (Thr) to asparagine (Asn). The results demonstrate that a minor alteration of the amino acid sequence in BphA1 improved the PCB degradation capability in biphenyl-utilizing bacteria.

Alternative primer sets for PCR detection of genotypes involved in bacterial aerobic BTEX degradation: distribution of the genes in BTEX degrading isolates and in subsurface soils of a BTEX contaminated industrial site

Eight new primer sets were designed for PCR detection of (i) mono-oxygenase and dioxygenase gene sequences involved in initial attack of bacterial aerobic BTEX degradation and of (ii) catechol 2,3-dioxygenase gene sequences responsible for meta-cleavage of the aromatic ring. The new primer sets allowed detection of the corresponding genotypes in soil with a detection limit of 10(3)-10(4) or 10(5)-10(6) gene copies g(-1) soil, assuming one copy of the gene per cell. The primer sets were used in PCR to assess the distribution of the catabolic genes in BTEX degrading bacterial strains and DNA extracts isolated from soils sampled from different locations and depths (vadose, capillary fringe and saturated zone) within a BTEX contaminated site. In both soil DNA and the isolates, tmoA-, xylM- and xylE1-like genes were the most frequently recovered BTEX catabolic genes. xylM and xylE1 were only recovered from material from the contaminated samples while tmoA was detected in material from both the contaminated and non-contaminated samples. The isolates, mainly obtained from the contaminated locations, belonged to the Actinobacteria or Proteobacteria (mainly Pseudomonas). The ability to degrade benzene was the most common BTEX degradation phenotype among them and its distribution was largely congruent with the distribution of the tmoA-like genotype. The presence of tmoA and xylM genes in phylogenetically distant strains indicated the occurrence of horizontal transfer of BTEX catabolic genes in the aquifer. Overall, these results show spatial variation in the composition of the BTEX degradation genes and hence in the type of BTEX degradation activity and pathway, at the examined site. They indicate that bacteria carrying specific pathways and primarily carrying tmoA/xylM/xylE1 genotypes, are being selected upon BTEX contamination.

Subtle difference between benzene and toluene dioxygenases of Pseudomonas putida

Benzene dioxygenase and toluene dioxygenase from Pseudomonas putida have similar catalytic properties, structures, and gene organizations, but they differ in substrate specificity, with toluene dioxygenase having higher activity toward alkylbenzenes. The catalytic iron-sulfur proteins of these enzymes consist of two dissimilar subunits, alpha and beta; the alpha subunit contains a [2Fe-2S] cluster involved in electron transfer, the catalytic nonheme iron center, and is also responsible for substrate specificity. The amino acid sequences of the alpha subunits of benzene and toluene dioxygenases differ at only 33 of 450 amino acids. Chimeric proteins and mutants of the benzene dioxygenase alpha subunit were constructed to determine which of these residues were primarily responsible for the change in specificity. The protein containing toluene dioxygenase C-terminal region residues 281 to 363 showed greater substrate preference for alkyl benzenes. In addition, we identified four amino acid substitutions in this region, I301V, T305S, I307L, and L309V, that particularly enhanced the preference for ethylbenzene. The positions of these amino acids in the alpha subunit structure were modeled by comparison with the crystal structure of naphthalene dioxygenase. They were not in the substrate-binding pocket but were adjacent to residues that lined the channel through which substrates were predicted to enter the active site. However, the quadruple mutant also showed a high uncoupled rate of electron transfer without product formation. Finally, the modified proteins showed altered patterns of products formed from toluene and ethylbenzene, including monohydroxylated side chains. We propose that these properties can be explained by a more facile diffusion of the substrate in and out of the substrate cavity.

The bphC gene-encoded 2,3-dihydroxybiphenyl-1,2-dioxygenase is involved in complete degradation of dibenzofuran by the biphenyl-degrading bacterium Ralstonia sp. SBUG 290

AIMS

Biphenyl-degrading bacteria are able to metabolize dibenzofuran via lateral dioxygenation and meta-cleavage of the dihydroxylated dibenzofuran produced. This degradation was considered to be incomplete because accumulation of a yellow-orange ring-cleavage product was observed. In this study, we want to characterize the 1,2-dihydroxydibenzofuran cleaving enzyme which is involved in dibenzofuran degradation in the bacterium Ralstonia sp. SBUG 290.

METHODS AND RESULTS

In this strain, complete degradation of dibenzofuran was observed after cultivation on biphenyl. The enzyme shows a wide substrate utilization spectrum, including 1,2-dihydroxydibenzofuran, 2,3-dihydroxybiphenyl, 1,2-dihydroxynaphthalene, 3- and 4-methylcatechol and catechol. MALDI-TOF analysis of the protein revealed a strong homology to the bphC gene products. We therefore cloned a 3.2 kb DNA fragment containing the bphC gene of Ralstonia sp. SBUG 290. The deduced amino acid sequence of bphC is identical to that of the corresponding gene in Pseudomonas sp. KKS102. The bphC gene was expressed in Escherichia coli and the meta-fission activity was detected using either 2,3-dihydroxybiphenyl or 1,2-dihydroxydibenzofuran as substrate.

CONCLUSIONS

These results demonstrate that complete degradation of dibenzofuran by biphenyl degraders can occur after initial oxidation steps catalysed by gene products encoded by the bph-operon. The ring fission of 1,2-dihydroxydibenzofuran is catalysed by BphC. Differences found in the metabolism of the ring fission product of dibenzofuran among biphenyl degrading bacteria are assumed to be caused by different substrate specificities of BphD.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study shows for the first time that the gene products of the bph-operon are involved in the mineralization of dibenzofuran in biphenyl degrading bacteria.

Aerobic degradation of polychlorinated biphenyls

The microbial degradation of polychlorinated biphenyls (PCBs) has been extensively studied in recent years. The genetic organization of biphenyl catabolic genes has been elucidated in various groups of microorganisms, their structures have been analyzed with respect to their evolutionary relationships, and new information on mobile elements has become available. Key enzymes, specifically biphenyl 2,3-dioxygenases, have been intensively characterized, structure/sequence relationships have been determined and enzymes optimized for PCB transformation. However, due to the complex metabolic network responsible for PCB degradation, optimizing degradation by single bacterial species is necessarily limited. As PCBs are usually not mineralized by biphenyl-degrading organisms, and cometabolism can result in the formation of toxic metabolites, the degradation of chlorobenzoates has received special attention. A broad set of bacterial strategies to degrade chlorobenzoates has recently been elucidated, including new pathways for the degradation of chlorocatechols as central intermediates of various chloroaromatic catabolic pathways. To optimize PCB degradation in the environment beyond these metabolic limitations, enhancing degradation in the rhizosphere has been suggested, in addition to the application of surfactants to overcome bioavailability barriers. However, further research is necessary to understand the complex interactions between soil/sediment, pollutant, surfactant and microorganisms in different environments.

Detection and enumeration of aromatic oxygenase genes by multiplex and real-time PCR

Our abilities to detect and enumerate pollutant-biodegrading microorganisms in the environment are rapidly advancing with the development of molecular genetic techniques. Techniques based on multiplex and real-time PCR amplification of aromatic oxygenase genes were developed to detect and quantify aromatic catabolic pathways, respectively. PCR primer sets were identified for the large subunits of aromatic oxygenases from alignments of known gene sequences and tested with genetically well-characterized strains. In all, primer sets which allowed amplification of naphthalene dioxygenase, biphenyl dioxygenase, toluene dioxygenase, xylene monooxygenase, phenol monooxygenase, and ring-hydroxylating toluene monooxygenase genes were identified. For each primer set, the length of the observed amplification product matched the length predicted from published sequences, and specificity was confirmed by hybridization. Primer sets were grouped according to the annealing temperature for multiplex PCR permitting simultaneous detection of various genotypes responsible for aromatic hydrocarbon biodegradation. Real-time PCR using SYBR green I was employed with the individual primer sets to determine the gene copy number. Optimum polymerization temperatures for real-time PCR were determined on the basis of the observed melting temperatures of the desired products. When a polymerization temperature of 4 to 5 degrees C below the melting temperature was used, background fluorescence signals were greatly reduced, allowing detection limits of 2 x 10(2) copies per reaction mixture. Improved in situ microbial characterization will provide more accurate assessment of pollutant biodegradation, enhance studies of the ecology of contaminated sites, and facilitate assessment of the impact of remediation technologies on indigenous microbial populations.

Crystal structure of a histidine-tagged serine hydrolase involved in the carbazole degradation (CarC enzyme)

2-Hydroxy-6-oxo-6-(2(')-aminophenyl)-hexa-2,4-dienoate hydrolases (CarC enzymes) from two carbazole-degrading bacteria were purified using recombinant Escherichia coli strains with the histidine (His)-tagged purification system. The His-tagged CarC (ht-CarC) enzymes from Pseudomonas resinovorans strain CA10 (ht-CarC(CA10)) and Janthinobacterium sp. strain J3 (ht-CarC(J3)) exhibited hydrolase activity toward 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoate as the purified native CarC(CA10) did. ht-CarC(J3) was crystallized in the space group I422 with cell dimensions of a=b=130.3A, c=84.5A in the hexagonal setting, and the crystal structure of ht-CarC(J3) was determined at 1.86A resolution. The final refined model of ht-CarC(J3) yields an R-factor of 21.6%, although the electron-density corresponding to Ile146 to Asn155 was ambiguous in the final model. We compared the known structures of BphD from Rhodococcus sp. strain RHA1 and CumD from Pseudomonas fluorescens strain IP01. The backbone conformation of ht-CarC(J3) was better superimposed with CumD than with BphD(RHA1). The side-chain directions of Arg185 and Trp262 residues in the substrate binding pockets of these enzymes were different among these proteins, suggesting that these residues may take a conformational change during the catalytic cycles.

Purification and properties of 2-hydroxy-6-oxo-6-(2'-aminophenyl)hexa-2,4-dienoic acid hydrolase involved in microbial degradation of carbazole

Hydrolysis following meta-ring cleavage by a dioxygenase is a well-known step in aromatic compound metabolism. The 2-hydroxy-6-oxo-6-(2'-aminophenyl)hexa-2,4-dienoic acid hydrolase from Pseudomonas LD2 is a new member of the small group of characterized aromatic hydrolases that catalyze the cleavage of C-C bonds. In this study, the His(6)-tagged 2-hydroxy-6-oxo-6-(2'-aminophenyl)hexa-2,4-dienoic acid (HOPDA) hydrolase was purified from a recombinant Escherichia coli strain utilizing immobilized metal affinity chromatography. 2-Hydroxy-6-oxo-6-(2'-aminophenyl)hexa-2,4-dienoic acid hydrolase is a colorless homodimer with no cofactor requirement. The enzyme actively converted HOPDA into benzoic acid and 2-hydroxypenta-2,4-dienoic acid. The enzyme exhibited activity between pH 6.5 and 10.5 with a maximum activity at pH 7.0. The optimum temperature at pH 7.0 was 60 degrees C. The calculated K'(m) for HOPDA was 4.6 microM, the V(max) was 3.3 micromol min(-1), and the K(s) was 70.0 microM. This corresponds to a maximum specific turnover rate of 1300 HOPDAs(-1)dimer(-1). The deduced amino acid sequence of CarC showed 30.3, 31.3, and 31.8% identity with TodF (P. putida F1), XylF (P. putida), and DmpD (Pseudomonas sp. CF600), respectively, which are meta-cleavage compound hydrolases from other Pseudomonads. The amino acid sequence Gly-X-Ser-X-Gly, which is highly conserved in these hydrolases, is also found in CarC. Lysates from a strain expressing enzyme in which the putative active site serine is mutated to alanine showed a significant reduction in activity.

Expansion of growth substrate range in Pseudomonas putida F1 by mutations in both cymR and todS, which recruit a ring-fission hydrolase CmtE and induce the tod catabolic operon, respectively

Pseudomonas putida F1 can assimilate benzene, toluene and ethylbenzene using the toluene degradation pathway, and can also utilize p-cymene via p-cumate using the p-cymene and p-cumate catabolic pathways. In the present study, P. putida F1 strains were isolated that were adapted to assimilate new substrates such as n-propylbenzene, n-butylbenzene, cumene and biphenyl, and the molecular mechanisms of genetic adaptation to an expanded range of aromatic hydrocarbons were determined. Nucleotide sequence analyses showed that the selected strains have mutations in the cymR gene but not in todF gene. The impairment of the repressor CymR by mutation led to the constitutive expression of CmtE, a meta-cleavage product hydrolase from the cmt operon. This study also showed that CmtE has a broad range of substrates and can hydrolyse meta-cleavage products formed from biphenyl and other new growth substrates via the toluene degradation pathway. However, the artificially constructed strain P. putida F1(cymR : : Tc(r)) and a recombinant P. putida F1, which expressed CmtE constitutively, could not grow on the new substrates. The adapted strains possess the tod operon, which is induced by new growth substrates that are poor inducers of wild-type P. putida F1. When the todS gene from the adapted strains was introduced in a trans manner to P. putida F1(cymR : : Tc(r)), the resulting recombinant strains were able to grow on biphenyl and other new substrates. This finding indicates that the TodS sensor was altered to recognize these substrates and this conclusion was confirmed by nucleotide sequence analyses. Amino acid substitutions were found in the regions corresponding to the receiver domain and the second PAS domain and their boundaries in the TodS protein. These results showed that P. putida F1 adapted strains capable of growth on n-propylbenzene, n-butylbenzene, cumene and biphenyl possess mutations to employ CmtE and to induce the tod catabolic operon by the new growth substrates.

Crystal structures of a meta-cleavage product hydrolase from Pseudomonas fluorescens IP01 (CumD) complexed with cleavage products

2-Hydroxy-6-oxo-7-methylocta-2,4-dienoate hydrolase (CumD) from Pseudomonas fluorescens IP01 hydrolyzes a meta-cleavage product generated in the cumene (isopropylbenzene) degradation pathway. The crystal structures of the inactive S103A mutant of the CumD enzyme complexed with isobutyrate and acetate ions were determined at 1.6 and 2.0 A resolution, respectively. The isobutyrate and acetate ions were located at the same position in the active site, and occupied the site for a part of the hydrolysis product with CumD, which has the key determinant group for the substrate specificity of related hydrolases. One of the oxygen atoms of the carboxyl group of the isobutyrate ion was hydrogen bonded with a water molecule and His252. Another oxygen atom of the carboxyl group was situated in an oxyanion hole formed by the two main-chain N atoms. The isopropyl group of the isobutyric acid was recognized by the side-chains of the hydrophobic residues. The substrate-binding pocket of CumD was long, and the inhibition constants of various organic acids corresponded well to it. In comparison with the structure of BphD from Rhodococcus sp. RHA1, the structural basis for the substrate specificity of related hydrolases, is revealed.

Purification, characterization, and steady-state kinetics of a meta-cleavage compound hydrolase from Pseudomonas fluorescens IPO1

2-Hydroxy-6-oxo-7-methylocta-2,4-dienoate (6-isopropyl-HODA) hydrolase (CumD), an enzyme of the cumene biodegradation pathway encoded by the cumD gene of Pseudomonas fluorescens IP01, was purified to homogeneity from an overexpressing Escherichia coli strain. SDS-polyacrylamide gel electrophoresis and gel filtration demonstrated that it is a dimeric enzyme with a subunit molecular mass of 32 kDa. The pH optima for activity and stability were 8.0 and 7.0-9.0, respectively. The enzyme exhibited a biphasic Arrhenius plot of catalysis with two characteristic energies of activation with a break point at 20 degrees C. The enzyme has a K(m) of 7.3 microM and a k(cat) of 21 s(-1) for 6-isopropyl-HODA (150 mM phosphate, pH 7.5, 25 degrees C), and its substrate specificity covers larger C6 substituents compared with another monoalkylbenzene hydrolase, TodR Unlike TodF, CumD could slightly hydrolyze 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoate (6-phenyl-HODA). A mutant enzyme as to a putative active site residue, S103A, had 10(5)-fold lower activity than that of the wild-type enzyme.

Functional analyses of Bph-Tod hybrid dioxygenase, which exhibits high degradation activity toward trichloroethylene

Biphenyl dioxygenase (BphDox) in Pseudomonas pseudoalcaligenes KF707 is a multicomponent enzyme consisting of an iron-sulfur protein (ISP) that is composed of alpha (BphA1) and beta (BphA2) subunits, a ferredoxin (FD(BphA3)), and a ferredoxin reductase (FDR(BphA4)). A recombinant Escherichia coli strain expressing hybrid Dox that had replaced BphA1 with TodC1 (alpha subunit of toluene dioxygenase (TolDox) of Pseudomonas putida) exhibited high activity toward trichloroethylene (TCE) (Furukawa, K., Hirose, J., Hayashida, S., and Nakamura, K. (1994) J. Bacteriol. 176, 2121-2123). In this study, ISP, FD, and FDR were purified and characterized. Reconstitution of the dioxygenase components consisting of purified ISP(TodC1BphA2), FD(BphA3), and FDR(BphA4) exhibited oxygenation activities toward biphenyl, toluene, and TCE. Native polyacrylamide gel electrophoresis followed by the Ferguson plot analyses demonstrated that ISP(TodC1BphA2) and ISP(BphA1A2) were present as heterohexamers, whereas ISP(TodC1C2) was present as a heterotetramer. The molecular activity (k(0)) of the hybrid Dox for TCE was 4.1 min(-1), which is comparable to that of TolDox. The K(m) value of the hybrid Dox for TCE was 130 microm, which was lower than 250 microm for TolDox. These results suggest that the alpha subunit of ISP is crucial for the determination of substrate specificity and that the change in the alpha subunit conformation of ISP from alpha(2)beta(2) to alpha(3)beta(3) results in the acquisition of higher affinity to TCE, which may lead to high TCE degradation activity.