AG alpha 1 is the structural gene for the Saccharomyces cerevisiae alpha-agglutinin, a cell surface glycoprotein involved in cell-cell interactions during mating

Chemotropism and Cell-Cell Fusion in Fungi

Fungi exhibit an enormous variety of morphologies, including yeast colonies, hyphal mycelia, and elaborate fruiting bodies. This diversity arises through a combination of polar growth, cell division, and cell fusion. Because fungal cells are nonmotile and surrounded by a protective cell wall that is essential for cell integrity, potential fusion partners must grow toward each other until they touch and then degrade the intervening cell walls without impacting cell integrity. Here, we review recent progress on understanding how fungi overcome these challenges. Extracellular chemoattractants, including small peptide pheromones, mediate communication between potential fusion partners, promoting the local activation of core cell polarity regulators to orient polar growth and cell wall degradation. However, in crowded environments, pheromone gradients can be complex and potentially confusing, raising the question of how cells can effectively find their partners. Recent findings suggest that the cell polarity circuit exhibits searching behavior that can respond to pheromone cues through a remarkably flexible and effective strategy called exploratory polarization.

Cell-Cell Mating Interactions: Overview and Potential of Single-Cell Force Spectroscopy

It is an understatement that mating and DNA transfer are key events for living organisms. Among the traits needed to facilitate mating, cell adhesion between gametes is a universal requirement. Thus, there should be specific properties for the adhesion proteins involved in mating. Biochemical and biophysical studies have revealed structural information about mating adhesins, as well as their specificities and affinities, leading to some ideas about these specialized adhesion proteins. Recently, single-cell force spectroscopy (SCFS) has added important findings. In SCFS, mating cells are brought into contact in an atomic force microscope (AFM), and the adhesive forces are monitored through the course of mating. The results have shown some remarkable characteristics of mating adhesins and add knowledge about the design and evolution of mating adhesins.

The Flo Adhesin Family

The first step in the infection of fungal pathogens in humans is the adhesion of the pathogen to host tissue cells or abiotic surfaces such as catheters and implants. One of the main players involved in this are the expressed cell wall adhesins. Here, we review the Flo adhesin family and their involvement in the adhesion of these yeasts during human infections. Firstly, we redefined the Flo adhesin family based on the domain architectures that are present in the Flo adhesins and their functions, and set up a new classification of Flo adhesins. Next, the structure, function, and adhesion mechanisms of the Flo adhesins whose structure has been solved are discussed in detail. Finally, we identified from Pfam database datamining yeasts that could express Flo adhesins and are encountered in human infections and their adhesin architectures. These yeasts are discussed in relation to their adhesion characteristics and involvement in infections.

Enzymatic Analysis of Yeast Cell Wall-Resident GAPDH and Its Secretion

In yeast, many proteins are found in both the cytoplasmic and extracellular compartments, and consequently it can be difficult to distinguish nonconventional secretion from cellular leakage. Therefore, we monitored the extracellular glyceraldehyde-3-phosphate dehydrogenase (GAPDH) activity of intact cells as a specific marker for nonconventional secretion. Extracellular GAPDH activity was proportional to the number of cells assayed, increased with incubation time, and was dependent on added substrates. Preincubation of intact cells with 100 μM dithiothreitol increased the reaction rate, consistent with increased access of the enzyme after reduction of cell wall disulfide cross-links. Such treatment did not increase cell permeability to propidium iodide, in contrast to effects of higher concentrations of reducing agents. An amine-specific membrane-impermeant biotinylation reagent specifically inactivated extracellular GAPDH. The enzyme was secreted again after a 30- to 60-min lag following the inactivation, and there was no concomitant increase in propidium iodide staining. There were about 4 × 10⁴ active GAPDH molecules per cell at steady state, and secretion studies showed replenishment to that level 1 h after inactivation. These results establish conditions for specific quantitative assays of cell wall proteins in the absence of cytoplasmic leakage and for subsequent quantification of secretion rates in intact cells.IMPORTANCE Eukaryotic cells secrete many proteins, including many proteins that do not follow the classical secretion pathway. Among these, the glycolytic enzyme glyceraldehyde-3-phosphate dehydrogenase (GAPDH) is unexpectedly found in the walls of yeasts and other fungi and in extracellular space in mammalian cell cultures. It is difficult to quantify extracellular GAPDH, because leakage of just a little of the very large amount of cytoplasmic enzyme can invalidate the determinations. We used enzymatic assays of intact cells while also maintaining membrane integrity. The results lead to estimates of the amount of extracellular enzyme and its rate of secretion to the wall in intact cells. Therefore, enzyme assays under controlled conditions can be used to investigate nonconventional secretion more generally.

Adhesins of Yeasts: Protein Structure and Interactions

The ability of yeast cells to adhere to other cells or substrates is crucial for many yeasts. The budding yeast Saccharomyces cerevisiae can switch from a unicellular lifestyle to a multicellular one. A crucial step in multicellular lifestyle adaptation is self-recognition, self-interaction, and adhesion to abiotic surfaces. Infectious yeast diseases such as candidiasis are initiated by the adhesion of the yeast cells to host cells. Adhesion is accomplished by adhesin proteins that are attached to the cell wall and stick out to interact with other cells or substrates. Protein structures give detailed insights into the molecular mechanism of adhesin-ligand interaction. Currently, only the structures of a very limited number of N-terminal adhesion domains of adhesins have been solved. Therefore, this review focuses on these adhesin protein families. The protein architectures, protein structures, and ligand interactions of the flocculation protein family of S. cerevisiae; the epithelial adhesion family of C. glabrata; and the agglutinin-like sequence protein family of C. albicans are reviewed and discussed.

Gamete signalling underlies the evolution of mating types and their number

The gametes of unicellular eukaryotes are morphologically identical, but are nonetheless divided into distinct mating types. The number of mating types varies enormously and can reach several thousand, yet most species have only two. Why do morphologically identical gametes need to be differentiated into self-incompatible mating types, and why is two the most common number of mating types? In this work, we explore a neglected hypothesis that there is a need for asymmetric signalling interactions between mating partners. Our review shows that isogamous gametes always interact asymmetrically throughout sex and argue that this asymmetry is favoured because it enhances the efficiency of the mating process. We further develop a simple mathematical model that allows us to study the evolution of the number of mating types based on the strength of signalling interactions between gametes. Novel mating types have an advantage as they are compatible with all others and rarely meet their own type. But if existing mating types coevolve to have strong mutual interactions, this restricts the spread of novel types. Similarly, coevolution is likely to drive out less attractive mating types. These countervailing forces specify the number of mating types that are evolutionarily stable.

This article is part of the themed issue ‘Weird sex: the underappreciated diversity of sexual reproduction’.

Genome-wide screen for genes involved in eDNA release during biofilm formation by Staphylococcus aureus

Staphylococcus aureus is a leading cause of both nosocomial and community-acquired infection. Biofilm formation at the site of infection reduces antimicrobial susceptibility and can lead to chronic infection. During biofilm formation, a subset of cells liberate cytoplasmic proteins and DNA, which are repurposed to form the extracellular matrix that binds the remaining cells together in large clusters. Using a strain that forms robust biofilms in vitro during growth under glucose supplementation, we carried out a genome-wide screen for genes involved in the release of extracellular DNA (eDNA). A high-density transposon insertion library was grown under biofilm-inducing conditions, and the relative frequency of insertions was compared between genomic DNA (gDNA) collected from cells in the biofilm and eDNA from the matrix. Transposon insertions into genes encoding functions necessary for eDNA release were identified by reduced representation in the eDNA. On direct testing, mutants of some of these genes exhibited markedly reduced levels of eDNA and a concomitant reduction in cell clustering. Among the genes with robust mutant phenotypes were gdpP, which encodes a phosphodiesterase that degrades the second messenger cyclic-di-AMP, and xdrA, the gene for a transcription factor that, as revealed by RNA-sequencing analysis, influences the expression of multiple genes, including many involved in cell wall homeostasis. Finally, we report that growth in biofilm-inducing medium lowers cyclic-di-AMP levels and does so in a manner that depends on the gdpP phosphodiesterase gene.

Candida albicans Agglutinin-Like Sequence (Als) Family Vignettes: A Review of Als Protein Structure and Function

Approximately two decades have passed since the description of the first gene in the Candida albicans ALS (agglutinin-like sequence) family. Since that time, much has been learned about the composition of the family and the function of its encoded cell-surface glycoproteins. Solution of the structure of the Als adhesive domain provides the opportunity to evaluate the molecular basis for protein function. This review article is formatted as a series of fundamental questions and explores the diversity of the Als proteins, as well as their role in ligand binding, aggregative effects, and attachment to abiotic surfaces. Interaction of Als proteins with each other, their functional equivalence, and the effects of protein abundance on phenotypic conclusions are also examined. Structural features of Als proteins that may facilitate invasive function are considered. Conclusions that are firmly supported by the literature are presented while highlighting areas that require additional investigation to reveal basic features of the Als proteins, their relatedness to each other, and their roles in C. albicans biology.

Engineering of Immunoglobulin Fc Heterodimers Using Yeast Surface-Displayed Combinatorial Fc Library Screening

Immunoglobulin Fc heterodimers, which are useful scaffolds for the generation of bispecific antibodies, have been mostly generated through structure-based rational design methods that introduce asymmetric mutations into the CH3 homodimeric interface to favor heterodimeric Fc formation. Here, we report an approach to generate heterodimeric Fc variants through directed evolution combined with yeast surface display. We developed a combinatorial heterodimeric Fc library display system by mating two haploid yeast cell lines, one haploid cell line displayed an Fc chain library (displayed FcCH3A) with mutations in one CH3 domain (CH3A) on the yeast cell surface, and the other cell line secreted an Fc chain library (secreted FcCH3B) with mutations in the other CH3 domain (CH3B). In the mated cells, secreted FcCH3B is displayed on the cell surface through heterodimerization with the displayed FcCH3A, the detection of which enabled us to screen the library for heterodimeric Fc variants. We constructed combinatorial heterodimeric Fc libraries with simultaneous mutations in the homodimer-favoring electrostatic interaction pairs K370-E357/S364 or D399-K392/K409 at the CH3 domain interface. High-throughput screening of the libraries using flow cytometry yielded heterodimeric Fc variants with heterodimer-favoring CH3 domain interface mutation pairs, some of them showed high heterodimerization yields (~80-90%) with previously unidentified CH3 domain interface mutation pairs, such as hydrogen bonds and cation-π interactions. Our study provides a new approach for engineering Fc heterodimers that could be used to engineer other heterodimeric protein-protein interactions through directed evolution combined with yeast surface display.

Genetically engineered transvestites reveal novel mating genes in budding yeast

Haploid budding yeast has two mating types, defined by the alleles of the MAT locus, MATa and MATα. Two haploid cells of opposite mating types mate by signaling to each other using reciprocal pheromones and receptors, polarizing and growing toward each other, and eventually fusing to form a single diploid cell. The pheromones and receptors are necessary and sufficient to define a mating type, but other mating-type-specific proteins make mating more efficient. We examined the role of these proteins by genetically engineering "transvestite" cells that swap the pheromone, pheromone receptor, and pheromone processing factors of one mating type for another. These cells mate with each other, but their mating is inefficient. By characterizing their mating defects and examining their transcriptomes, we found Afb1 (a-factor barrier), a novel MATα-specific protein that interferes with a-factor, the pheromone secreted by MATa cells. Strong pheromone secretion is essential for efficient mating, and the weak mating of transvestites can be improved by boosting their pheromone production. Synthetic biology can characterize the factors that control efficiency in biological processes. In yeast, selection for increased mating efficiency is likely to have continually boosted pheromone levels and the ability to discriminate between partners who make more and less pheromone. This discrimination comes at a cost: weak mating in situations where all potential partners make less pheromone.

Expression of Pneumocystis jirovecii major surface glycoprotein in Saccharomyces cerevisiae

The major surface glycoprotein (Msg), which is the most abundant protein expressed on the cell surface of Pneumocystis organisms, plays an important role in the attachment of this organism to epithelial cells and macrophages. In the present study, we expressed Pneumocystis jirovecii Msg in Saccharomyces cerevisiae, a phylogenetically related organism. Full-length P. jirovecii Msg was expressed with a DNA construct that used codons optimized for expression in yeast. Unlike in Pneumocystis organisms, recombinant Msg localized to the plasma membrane of yeast rather than to the cell wall. Msg expression was targeted to the yeast cell wall by replacing its signal peptide, serine-threonine-rich region, and glycophosphatidylinositol anchor signal region with the signal peptide of cell wall protein α-agglutinin of S. cerevisiae, the serine-threonine-rich region of epithelial adhesin (Epa1) of Candida glabrata, and the carboxyl region of the cell wall protein (Cwp2) of S. cerevisiae, respectively. Immunofluorescence analysis and treatment with β-1,3 glucanase demonstrated that the expressed Msg fusion protein localized to the yeast cell wall. Surface expression of Msg protein resulted in increased adherence of yeast to A549 alveolar epithelial cells. Heterologous expression of Msg in yeast will facilitate studies of the biologic properties of Pneumocystis Msg.

A screen for deficiencies in GPI-anchorage of wall glycoproteins in yeast

Many of the genes and enzymes critical for assembly and biogenesis of yeast cell walls remain unidentified or poorly characterized. Therefore, we designed a high throughput genomic screen for defects in anchoring of GPI-cell wall proteins (GPI-CWPs), based on quantification of a secreted GFP-Sag1p fusion protein. Saccharomyces cerevisiae diploid deletion strains were transformed with a plasmid expressing the fusion protein under a GPD promoter, then GFP fluorescence was determined in culture supernatants after mid-exponential growth. Variability in the amount of fluorescent marker secreted into the medium was reduced by growth at 18 degrees C in buffered defined medium in the presence of sorbitol. Secondary screens included immunoblotting for GFP, fluorescence emission spectra, cell surface fluorescence, and cell integrity. Of 167 mutants deleted for genes affecting cell wall biogenesis or structure, eight showed consistent hyper-secretion of GFP relative to parental strain BY4743: tdh3 (glyceraldehyde-3-phosphate dehydrogenase), gda1 (guanosine diphosphatase), gpi13 and mcd4 (both ethanolamine phosphate-GPI-transferases), kre5 and kre1 (involved in synthesis of beta1,6 glucan), dcw1(implicated in GPI-CWP cross-linking to cell wall glucan), and cwp1 (a major cell wall protein). In addition, deletion of a number of genes caused decreased secretion of GFP. These results elucidate specific roles for specific genes in cell wall biogenesis, including differentiating among paralogous genes.

Hwp1 and related adhesins contribute to both mating and biofilm formation in Candida albicans

Candida albicans Hwp1, Hwp2, and Rbt1 are related cell wall proteins expressed during the programs of sexual differentiation and filamentous growth. In this study, we compare strains lacking either single factors or a combination of these genes, and we demonstrate distinct but overlapping roles in mating and biofilm formation.

Regulation of the display ratio of enzymes on the Saccharomyces cerevisiae cell surface by the immunoglobulin G and cellulosomal enzyme binding domains

We constructed a novel cell surface display system to control the ratio of target proteins on the Saccharomyces cerevisiae cell surface, using two pairs of protein-protein interactions. One protein pair is the Z domain of protein A derived from Staphylococcus aureus and the Fc domain of human immunoglobulin G. The other is the cohesin (Coh) and dockerin (Dock) from the cellulosome of Clostridium cellulovorans. In this proposed displaying system, the scaffolding proteins (fusion proteins of Z and Coh) were displayed on the cell surface by fusing with the 3' half of alpha-agglutinin, and the target proteins fused with Fc or Dock were secreted. As a target protein, a recombinant Trichoderma reesei endoglucanase II (EGII) was secreted into the medium and immediately displayed on the yeast cell surface via the Z and Fc domains. Display of EGII on the cell surface was confirmed by hydrolysis of beta-glucan as a substrate, and EGII activity was detected in the cell pellet fraction. Finally, two enzymes, EGII and Aspergillus aculeatus beta-glucosidase 1, were codisplayed on the cell surface via Z-Fc and Dock-Coh interactions, respectively. As a result, the yeast displaying two enzymes hydrolyzed beta-glucan to glucose very well. These results strongly indicated that the proposed strategy, the simultaneous display of two enzymes on the yeast cell surface, was accomplished by quantitatively controlling the display system using affinity binding.

Conserved WCPL and CX4C domains mediate several mating adhesin interactions in Saccharomyces cerevisiae

Several adhesins are induced by pheromones during mating in Saccharomyces cerevisiae, including Aga1p, Aga2p, Sag1p (Agalpha1p), and Fig2p. These four proteins all participate in or influence a well-studied agglutinin interaction mediated by Aga1p-Aga2p complexes and Sag1p; however, they also play redundant and essential roles in mating via an unknown mechanism. Aga1p and Fig2p both contain repeated, conserved WCPL and CX(4)C domains. This study was directed toward understanding the mechanism underlying the collective requirement of agglutinins and Fig2p for mating. Apart from the well-known agglutinin interaction between Aga2p and Sag1p, three more pairs of interactions in cells of opposite mating type were revealed by this study, including bilateral heterotypic interactions between Aga1p and Fig2p and a homotypic interaction between Fig2p and Fig2p. These four pairs of adhesin interactions are collectively required for maximum mating efficiency and normal zygote morphogenesis. GPI-less, epitope-tagged forms of Aga1p and Fig2p can be co-immunoprecipitated from the culture medium of mating cells in a manner dependent on the WCPL and CX(4)C domains in the R1 repeat of Aga1p. Using site-directed mutagenesis, the conserved residues in Aga1p that interact with Fig2p were identified. Aga1p is involved in two distinct adhesive functions that are independent of each other, which raises the possibility for combinatorial interactions of this protein with its different adhesion receptors, Sag1 and Fig2p, a property of many higher eukaryotic adhesins.

Discovering the secrets of the Candida albicans agglutinin-like sequence (ALS) gene family--a sticky pursuit

The agglutinin-like sequence (ALS) family of Candida albicans includes eight genes that encode large cell-surface glycoproteins. The high degree of sequence relatedness between the ALS genes and the tremendous allelic variability often present in the same C. albicans strain complicated definition and characterization of the gene family. The main hypothesis driving ALS family research is that the genes encode adhesins, primarily involved in host-pathogen interactions. Although adhesive function has been demonstrated for several Als proteins, the challenge of studying putative adhesins in a highly adhesive organism like C. albicans has led to varying ideas about how best to pursue such investigations, and results that are sometimes contradictory. Recent analysis of alsdelta/alsdelta strains suggested roles for Als proteins outside of adhesion to host surfaces, and a broader scope of Als protein function than commonly believed. The availability and use of experimental methodologies to study C. albicans at the genomic level, and the ALS family en masse, have advanced knowledge of these genes and emphasized their importance in C. albicans biology and pathogenesis.

Candida albicans Als3p is required for wild-type biofilm formation on silicone elastomer surfaces

Candida albicans ALS3 encodes a large cell-surface glycoprotein that has adhesive properties. Immunostaining of cultured C. albicans germ tubes showed that Als3p is distributed diffusely across the germ tube surface. Two-photon laser scanning microscopy of model catheter biofilms grown using a PALS3-green fluorescent protein (GFP) reporter strain showed GFP production in hyphae throughout the biofilm structure while biofilms grown using a PTPI1-GFP reporter strain showed GFP in both hyphae and yeast-form cells. Model catheter biofilms formed by an als3 Delta/als3 Delta strain were weakened structurally and had approximately half the biomass of a wild-type biofilm. Reintegration of a wild-type ALS3 allele restored biofilm mass and wild-type biofilm structure. Production of an Als3p-Ag alpha 1p fusion protein under control of the ALS3 promoter in the als3 Delta/als3 Delta strain restored some of the wild-type biofilm structural features, but not the wild-type biofilm mass. Despite its inability to restore wild-type biofilm mass, the Als3p-Ag alpha 1p fusion protein mediated adhesion of the als3 Delta/als3 Delta C. albicans strain to human buccal epithelial cells (BECs). The adhesive role of the Als3p N-terminal domain was further demonstrated by blocking adhesion of C. albicans to BECs with immunoglobulin reactive against the Als3p N-terminal sequences. Together, these data suggest that portions of Als3p that are important for biofilm formation may be different from those that are important in BEC adhesion, and that Als3p may have multiple functions in biofilm formation. Overexpression of ALS3 in an efg1 Delta/efg1 Delta strain that was deficient for filamentous growth and biofilm formation resulted in growth of elongated C. albicans cells, even under culture conditions that do not favour filamentation. In the catheter biofilm model, the ALS3 overexpression strain formed biofilm with a mass similar to that of a wild-type control. However, C. albicans cells in the biofilm had yeast-like morphology. This result uncouples the effect of cellular morphology from biofilm formation and underscores the importance of Als3p in biofilm development on silicone elastomer surfaces.

Role of cell cycle-regulated expression in the localized incorporation of cell wall proteins in yeast

The yeast cell wall is an essential organelle that protects the cell from mechanical damage and antimicrobial peptides, participates in cell recognition and adhesion, and is important for the generation and maintenance of normal cell shape. We studied the localization of three covalently bound cell wall proteins in Saccharomyces cerevisiae. Tip1p was found only in mother cells, whereas Cwp2p was incorporated in small-to-medium-sized buds. When the promoter regions of TIP1 and CWP2 (responsible for transcription in early G1 and S/G2 phases, respectively) were exchanged, the localization patterns of Tip1p and Cwp2p were reversed, indicating that the localization of cell wall proteins can be completely determined by the timing of transcription during the cell cycle. The third protein, Cwp1p, was incorporated into the birth scar, where it remained for several generations. However, we could not detect any role of Cwp1p in strengthening the birth scar wall or any functional interaction with the proteins that mark the birth scar pole as a potential future budding site. Promoter-exchange experiments showed that expression in S/G2 phase is necessary but not sufficient for the normal localization of Cwp1p. Studies of mutants in which septum formation is perturbed indicate that the normal asymmetric localization of Cwp1p also depends on the normal timing of septum formation, composition of the septum, or both.

The undertranslated transcriptome reveals widespread translational silencing by alternative 5' transcript leaders

Eight per cent of yeast transcripts, mostly involved in responses to stress or external stimuli, were found to be under-loaded with ribosomes, and most of them exhibited structural changes in their 5’ transcript leaders in response to the environmental signal.

Background

Translational efficiencies in Saccharomyces cerevisiae vary from transcript to transcript by approximately two orders of magnitude. Many of the poorly translated transcripts were found to respond to the appropriate external stimulus by recruiting ribosomes. Unexpectedly, a high frequency of these transcripts showed the appearance of altered 5' leaders that coincide with increased ribosome loading.

Results

Of the detectable transcripts in S. cerevisiae, 8% were found to be underloaded with ribosomes. Gene ontology categories of responses to stress or external stimuli were overrepresented in this population of transcripts. Seventeen poorly loaded transcripts involved in responses to pheromone, nitrogen starvation, and osmotic stress were selected for detailed study and were found to respond to the appropriate environmental signal with increased ribosome loading. Twelve of these regulated transcripts exhibited structural changes in their 5' transcript leaders in response to the environmental signal. In many of these the coding region remained intact, whereas regulated shortening of the 5' end truncated the open reading frame in others. Colinearity between the gene and transcript sequences eliminated regulated splicing as a mechanism for these alterations in structure.

Conclusion

Frequent occurrence of coordinated changes in transcript structure and translation efficiency, in at least three different gene regulatory networks, suggests a widespread phenomenon. It is likely that many of these altered 5' leaders arose from changes in promoter usage. We speculate that production of translationally silenced transcripts may be one mechanism for allowing low-level transcription activity necessary for maintaining an open chromatin structure while not allowing inappropriate protein production.

Synergistic saccharification, and direct fermentation to ethanol, of amorphous cellulose by use of an engineered yeast strain codisplaying three types of cellulolytic enzyme

A whole-cell biocatalyst with the ability to induce synergistic and sequential cellulose-degradation reaction was constructed through codisplay of three types of cellulolytic enzyme on the cell surface of the yeast Saccharomyces cerevisiae. When a cell surface display system based on alpha-agglutinin was used, Trichoderma reesei endoglucanase II and cellobiohydrolase II and Aspergillus aculeatus beta-glucosidase 1 were simultaneously codisplayed as individual fusion proteins with the C-terminal-half region of alpha-agglutinin. Codisplay of the three enzymes on the cell surface was confirmed by observation of immunofluorescence-labeled cells with a fluorescence microscope. A yeast strain codisplaying endoglucanase II and cellobiohydrolase II showed significantly higher hydrolytic activity with amorphous cellulose (phosphoric acid-swollen cellulose) than one displaying only endoglucanase II, and its main product was cellobiose; codisplay of beta-glucosidase 1, endoglucanase II, and cellobiohydrolase II enabled the yeast strain to directly produce ethanol from the amorphous cellulose (which a yeast strain codisplaying beta-glucosidase 1 and endoglucanase II could not), with a yield of approximately 3 g per liter from 10 g per liter within 40 h. The yield (in grams of ethanol produced per gram of carbohydrate consumed) was 0.45 g/g, which corresponds to 88.5% of the theoretical yield. This indicates that simultaneous and synergistic saccharification and fermentation of amorphous cellulose to ethanol can be efficiently accomplished using a yeast strain codisplaying the three cellulolytic enzymes.

Deficiencies in the endoplasmic reticulum (ER)-membrane protein Gab1p perturb transfer of glycosylphosphatidylinositol to proteins and cause perinuclear ER-associated actin bar formation

The essential GAB1 gene, which encodes an endoplasmic reticulum (ER)-membrane protein, was identified in a screen for mutants defective in cellular morphogenesis. A temperature-sensitive gab1 mutant accumulates complete glycosylphosphatidylinositol (GPI) precursors, and its temperature sensitivity is suppressed differentially by overexpression of different subunits of the GPI transamidase, from strong suppression by Gpi8p and Gpi17p, to weak suppression by Gaa1p, and to no suppression by Gpi16p. In addition, both Gab1p and Gpi17p localize to the ER and are in the same protein complex in vivo. These findings suggest that Gab1p is a subunit of the GPI transamidase with distinct relationships to other subunits in the same complex. We also show that depletion of Gab1p or Gpi8p, but not Gpi17p, Gpi16p, or Gaa1p causes accumulation of cofilin-decorated actin bars that are closely associated with the perinuclear ER, which highlights a functional interaction between the ER network and the actin cytoskeleton.

AFLMP1 encodes an antigenic cel wall protein in Aspergillus flavus

We have previously reported the cloning and characterization of the MP1 gene in Penicillium marneffei and the AFMP1 gene in Aspergillus fumigatus and their use for serodiagnosis of penicilliosis and aspergilloma and invasive aspergillosis, respectively. In this study, we describe the cloning of the AFLMP1 gene, which encodes the homologous antigenic cell wall protein in Aspergillus flavus, the most common Aspergillus species associated with human disease in our locality and in other Asian countries and the second most common Aspergillus species associated with human disease in Western countries. AFLMP1 codes for a protein, Aflmp1p, of 273 amino acid residues, with a few sequence features that are present in Mp1p and Afmp1p, the homologous antigenic cell wall proteins in P. marneffei and A. fumigatus, respectively, as well as several other cell wall proteins of Saccharomyces cerevisiae and Candida albicans. It contains a serine- and threonine-rich region for O glycosylation, a signal peptide, and a putative glycosylphosphatidylinositol attachment signal sequence. Specific anti-Aflmp1p antibody was generated with recombinant Aflmp1p protein purified from Escherichia coli to allow further characterization of Aflmp1p. Indirect immunofluorescence analysis indicated that Aflmp1p is present on the surface of the hyphae of A. flavus. Finally, it was observed that patients with aspergilloma and invasive aspergillosis due to A. flavus develop a specific antibody response against Aflmp1p. This suggested that the recombinant protein and its antibody may be useful for serodiagnosis in patients with aspergilloma or invasive aspergillosis, and the protein may represent a good cell surface target for host humoral immunity.

Role of Fig2p in agglutination in Saccharomyces cerevisiae

In W303-derived strains, disruption of FIG2 increased agglutinability of alpha cells, but not a cells, and did not alter expression of alpha-agglutinin, binding of 125I-labeled alpha-agglutinin, or mating efficiency. Fig2p overexpression led to alpha-cell-specfic suppression of agglutinability. These results imply that Fig2p is an indirect masker of the active sites in alpha-agglutinin.

Characterization of AFMP1: a novel target for serodiagnosis of aspergillosis

We cloned the AFMP1 gene, which encodes the first antigenic cell wall galactomannoprotein in Aspergillus fumigatus. AFMP1 codes for a protein, Afmp1p, of 284 amino acid residues, with a few sequence features that are present in Mp1p, the antigenic cell wall mannoprotein in Penicillium marneffei that we described previously, as well as several other cell wall proteins of Saccharomyces cerevisiae and Candida albicans. It contains a serine- and threonine-rich region for O glycosylation, a signal peptide, and a putative glycosylphosphatidyl inositol attachment signal sequence. Specific anti-Afmp1p antibody was generated with recombinant Afmp1p protein purified from Escherichia coli to allow further characterization of Afmp1p. Afmp1p has a high affinity for Galanthus nivalis agglutinin, a characteristic indicative of a mannoprotein. Furthermore, it was recognized by a rat monoclonal antibody against the galactofuran side chain of galactomannan, indicating that it is a galactomannoprotein. Ultrastructural analysis by immunogold staining indicated that Afmp1p is present in the cell walls of the hyphae and conidia of A. fumigatus. Finally, it was observed that patients with aspergilloma and invasive aspergillosis due to A. fumigatus develop a specific antibody response against Afmp1p. This suggested that the recombinant protein and its antibody may be useful for serodiagnosis in patients with aspergilloma or invasive aspergillosis, and the protein may represent a good cell surface target for host humoral immunity.

Genetically controlled self-aggregation of cell-surface-engineered yeast responding to glucose concentration

We constructed an arming (cell-surface-engineered) yeast displaying two types of agglutinin (modified a-agglutinin and alpha-agglutinin) on the cell surface, with agglutination being independent of both mating type and pheromones. The modified a-agglutinin was artificially prepared by the fusion of the genes encoding Aga1p and Aga2p. The modified a-agglutinin could induce agglutination of cells displaying Agalpha1p (alpha-agglutinin). The upstream region of the isocitrate lyase gene of Candida tropicalis (UPR-ICL), active at a low glucose concentration, was used as the promoter to express the modified a-agglutinin- and alpha-agglutinin-encoding genes. The arming yeast displaying both agglutinins agglutinated and sedimented in response to decreased glucose concentration. When the glucose concentration was high, the arming yeast grew normally. In the late log phase, when the glucose concentration became very low, agglutination occurred suddenly and drastically and yeast cells sedimented completely. Sedimentation was confirmed by weighing the aggregated cells after filtration of the broth. Strains in which aggregation can be genetically controlled can be used in industrial processes in which the separation of yeast cells from the supernatant is necessary.

A Saccharomyces gene family involved in invasive growth, cell-cell adhesion, and mating

The cell wall of bakers' yeast contains a family of glycosyl-phosphatidylinositol (GPI)-linked glycoproteins of domain structure similar to the adhesins of pathogenic fungi. In wild-type cells each of these proteins has a unique function in different developmental processes (mating, invasive growth, cell-cell adhesion, or filamentation). What unifies these developmental events is adhesion, either to an inert substrate or to a cell. Although they differ in their specificities, many of these proteins can substitute for each other when overexpressed. For example, Flo11p is required during vegetative growth for haploid invasion and diploid filamentation, whereas Fig2p is required for mating. When overexpressed, Flo11p and Fig2p can function in mating, invasion, filamentation, and flocculation. The ability of Flo11p to supply Fig2p function in mating depends on its intracellular localization to the mating projection, where Fig2p normally functions in the adhesion of mating cells. Our data show that even distant family members retain the ability to carry out disparate functions if localized and expressed appropriately.

Amino acid residues in the omega-minus region participate in cellular localization of yeast glycosylphosphatidylinositol-attached proteins

The final destination of glycosylphosphatidylinositol (GPI)-attached proteins in Saccharomyces cerevisiae is the plasma membrane or the cell wall. Two kinds of signals have been proposed for their cellular localization: (i) the specific amino acid residues V, I, or L at the site 4 or 5 amino acids upstream of the GPI attachment site (the omega site) and Y or N at the site 2 amino acids upstream of the omega site for cell wall localization and (ii) dibasic residues in the region upstream of the omega site (the omega-minus region) for plasma membrane localization. The relationships between these amino acid residues and efficiencies of cell wall incorporation were examined by constructing fusion reporter proteins from open reading frames encoding putative GPI-attached proteins. The levels of incorporation were high in the constructs containing the specific amino acid residues and quite low in those containing two basic amino acid residues in the omega-minus region. With constructs that contained neither specific residues nor two basic residues, levels of incorporation were moderate. These correlations clearly suggest that GPI-attached proteins have two different signals which act positively or negatively in cell wall incorporation for their cellular localization.

Deletion of new covalently linked cell wall glycoproteins alters the electrophoretic mobility of phosphorylated wall components of Saccharomyces cerevisiae

The incorporation of radioactive orthophosphate into the cell walls of Saccharomyces cerevisiae was studied. 33P-labeled cell walls were extensively extracted with hot sodium dodecyl sulfate (SDS). Of the remaining insoluble radioactivity more than 90% could be released by laminarinase. This radioactive material stayed in the stacking gel during SDS-polyacrylamide gel electrophoresis but entered the separating gel upon treatment with N-glycosidase F, indicating that phosphate was linked directly or indirectly to N-mannosylated glycoproteins. The phosphate was bound to covalently linked cell wall proteins as mannose-6-phosphate, the same type of linkage shown previously for soluble mannoproteins (L. Ballou, L. M. Hernandez, E. Alvarado, and C. E. Ballou, Proc. Natl. Acad. Sci. USA 87:3368-3372, 1990). From the phosphate-labeled glycoprotein fraction released by laminarinase, three cell wall mannoproteins, Ccw12p, Ccw13p and Ccw14p, were isolated and identified by N-terminal sequencing. For Ccw13p (encoded by DAN1 [also called TIR3]) and Ccw12p the association with the cell wall has not been described before; Ccw14p is identical with cell wall protein Icwp (I. Moukadiri, J. Armero, A. Abad, R. Sentandreu, and J. Zueco, J. Bacteriol. 179:2154-2162, 1997). In ccw12, ccw13, or ccw14 single or double mutants neither the amount of radioactive phosphate incorporated into cell wall proteins nor its position in the stacking gel was changed. However, the triple mutant brought about a shift of the 33P-labeled glycoprotein components from the stacking gel into the separating gel. The disruption of CCW12 results in a pronounced sensitivity of the cells to calcofluor white and Congo red. In addition, the ccw12 mutant shows a decrease in mating efficiency and a defect in agglutination.

Assimilation of cellooligosaccharides by a cell surface-engineered yeast expressing beta-glucosidase and carboxymethylcellulase from aspergillus aculeatus

Since Saccharomyces cerevisiae lacks the cellulase complexes that hydrolyze cellulosic materials, which are abundant in the world, two types of hydrolytic enzymes involved in the degradation of cellulosic materials to glucose were genetically co-immobilized on its cell surface for direct utilization of cellulosic materials, one of the final goals of our studies. The genes encoding FI-carboxymethylcellulase (CMCase) and beta-glucosidase from the fungus Aspergillus aculeatus were individually fused with the gene encoding the C-terminal half (320 amino acid residues from the C terminus) of yeast alpha-agglutinin and introduced into S. cerevisiae. The delivery of CMCase and beta-glucosidase to the cell surface was carried out by the secretion signal sequence of the native signal sequence of CMCase and by the secretion signal sequence of glucoamylase from Rhizopus oryzae for beta-glucosidase, respectively. The genes were expressed by the glyceraldehyde-3-phosphate dehydrogenase promoter from S. cerevisiae. The CMCase and beta-glucosidase activities were detected in the cell pellet fraction, not in the culture supernatant. The display of CMCase and beta-glucosidase proteins on the cell surface was confirmed by immunofluorescence microscopy. The cells displaying these cellulases could grow on cellobiose or water-soluble cellooligosaccharides as the sole carbon source. The degradation and assimilation of cellooligosaccharides were confirmed by thin-layer chromatography. This result showed that the cell surface-engineered yeast with these enzymes can be endowed with the ability to assimilate cellooligosaccharides. This is the first step in the assimilation of cellulosic materials by S. cerevisiae expressing heterologous cellulase genes.

Identification of Candida albicans ALS2 and ALS4 and localization of als proteins to the fungal cell surface

Additional genes in the growing ALS family of Candida albicans were isolated by PCR screening of a genomic fosmid library with primers designed from the consensus tandem-repeat sequence of ALS1. This procedure yielded fosmids encoding ALS2 and ALS4. ALS2 and ALS4 conformed to the three-domain structure of ALS genes, which consists of a central domain of tandemly repeated copies of a 108-bp motif, an upstream domain of highly conserved sequences, and a domain of divergent sequences 3' of the tandem repeats. Alignment of five predicted Als protein sequences indicated conservation of N- and C-terminal hydrophobic regions which have the hallmarks of secretory signal sequences and glycosylphosphatidylinositol addition sites, respectively. Heterologous expression of an N-terminal fragment of Als1p in Saccharomyces cerevisiae demonstrated function of the putative signal sequence with cleavage following Ala17. This signal sequence cleavage site was conserved in the four other Als proteins analyzed, suggesting identical processing of each protein. Primary-structure features of the five Als proteins suggested a cell-surface localization, which was confirmed by indirect immunofluorescence with an anti-Als antiserum. Staining was observed on mother yeasts and germ tubes, although the intensity of staining on the mother yeast decreased with elongation of the germ tube. Similar to other ALS genes, ALS2 and ALS4 were differentially regulated. ALS4 expression was correlated with the growth phase of the culture; ALS2 expression was not observed under many different in vitro growth conditions. The data presented here demonstrate that ALS genes encode cell-surface proteins and support the conclusion that the size and number of Als proteins on the C. albicans cell surface vary with strain and growth conditions.

Expression of the Candida albicans gene ALS1 in Saccharomyces cerevisiae induces adherence to endothelial and epithelial cells

To identify genes encoding adhesins that mediate the binding of Candida albicans to endothelial cells, a genomic library from this organism was constructed and used to transform Saccharomyces cerevisiae. These transformed organisms were screened for adherence to endothelial cells, and a highly adherent clone was identified. The adherence of this clone to endothelial cells was over 100-fold greater than that of control S. cerevisiae transformed with the empty plasmid. This clone also exhibited enhanced adherence to epithelial cells. The C. albicans gene contained within this clone was found to be ALS1. These results indicate that ALS1 may encode a candidal adhesin.

MP1 encodes an abundant and highly antigenic cell wall mannoprotein in the pathogenic fungus Penicillium marneffei

We cloned the MP1 gene, which encodes an abundant antigenic cell wall mannoprotein from the dimorphic pathogenic fungus Penicillium marneffei. MP1 is a unique gene without homologs in sequence databases. It codes for a protein, Mp1p, of 462 amino acid residues, with a few sequence features that are present in several cell wall proteins of Saccharomyces cerevisiae and Candida albicans. It contains two putative N glycosylation sites, a serine- and threonine-rich region for O glycosylation, a signal peptide, and a putative glycosylphosphatidylinositol attachment signal sequence. Specific anti-Mp1p antibody was generated with recombinant Mp1p protein purified from Escherichia coli to allow further characterization of Mp1p. Western blot analysis with anti-Mp1p antibody revealed that Mp1p has predominant bands with molecular masses of 58 and 90 kDa and that it belongs to a group of cell wall proteins that can be readily removed from yeast cell surfaces by glucanase digestion. In addition, Mp1p is an abundant yeast glycoprotein and has high affinity for concanavalin A, a characteristic indicative of a mannoprotein. Furthermore, ultrastructural analysis with immunogold staining indicated that Mp1p is present in the cell walls of the yeast, hyphae, and conidia of P. marneffei. Finally, it was observed that infected patients develop a specific antibody response against Mp1p, suggesting that this protein represents a good cell surface target for host humoral immunity.

Cell wall and secreted proteins of Candida albicans: identification, function, and expression

The cell wall is essential to nearly every aspect of the biology and pathogenicity of Candida albicans. Although it was initially considered an almost inert cellular structure that protected the protoplast against osmotic offense, more recent studies have demonstrated that it is a dynamic organelle. The major components of the cell wall are glucan and chitin, which are associated with structural rigidity, and mannoproteins. The protein component, including both mannoprotein and nonmannoproteins, comprises some 40 or more moieties. Wall proteins may differ in their expression, secretion, or topological location within the wall structure. Proteins may be modified by glycosylation (primarily addition of mannose residues), phosphorylation, and ubiquitination. Among the secreted enzymes are those that are postulated to have substrates within the cell wall and those that find substrates in the extracellular environment. Cell wall proteins have been implicated in adhesion to host tissues and ligands. Fibrinogen, complement fragments, and several extracellular matrix components are among the host proteins bound by cell wall proteins. Proteins related to the hsp70 and hsp90 families of conserved stress proteins and some glycolytic enzyme proteins are also found in the cell wall, apparently as bona fide components. In addition, the expression of some proteins is associated with the morphological growth form of the fungus and may play a role in morphogenesis. Finally, surface mannoproteins are strong immunogens that trigger and modulate the host immune response during candidiasis.

Identification of a mannoprotein present in the inner layer of the cell wall of Saccharomyces cerevisiae

Cell wall extracts from the double-mutant mnn1 mnn9 strain were used as the immunogen to obtain a monoclonal antibody (MAb), SAC A6, that recognizes a specific mannoprotein--which we have named Icwp--in the walls of cells of Saccharomyces cerevisiae. Icwp runs as a polydisperse band of over 180 kDa in sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis of Zymolyase extracts of cell walls, although an analysis of the secretory pattern of the mannoprotein shows that at the level of secretory vesicles, it behaves like a discrete band of 140 kDa. Immunofluorescence analysis with the MAb showed that Icwp lies at the inner layer of the cell wall, being accessible to the antibody only after the outer layer of mannoproteins is disturbed by treatment with tunicamycin. The screening of a lambda gt11 expression library enabled us to identify the open reading frame (ORF) coding for Icwp. ICWP (EMBL accession number YLR391w, frame +3) codes for 238 amino acids, of which over 40% are serine or threonine, and contains a putative N-glycosylation site and a putative glycosylphosphatidylinositol attachment signal. Both disruption and overexpression of the ORF caused increased sensitivities to calcofluor white and Congo red, while the disruption caused an increased sensitivity to Zymolyase digestion, suggesting for Icwp a structural role in association with glucan.

FLO11, a yeast gene related to the STA genes, encodes a novel cell surface flocculin

We report the characterization of a gene encoding a novel flocculin related to the STA genes of yeast, which encode secreted glucoamylase. The STA genes comprise sequences that are homologous to the sporulation-specific glucoamylase SGA and to two other sequences, S2 and S1. We find that S2 and S1 are part of a single gene which we have named FLO11. The sequence of FLO11 reveals a 4,104-bp open reading frame on chromosome IX whose predicted product is similar in overall structure to the class of yeast serine/threonine-rich GPI-anchored cell wall proteins. An amino-terminal domain containing a signal sequence and a carboxy-terminal domain with homology to GPI (glycosyl-phosphatidyl-inositol) anchor-containing proteins are separated by a central domain containing a highly repeated threonine- and serine-rich sequence. Yeast cells that express FLO11 aggregate in the calcium-dependent process of flocculation. Flocculation is abolished when FLO11 is disrupted. The product of STA1 also is shown to have flocculating activity. When a green fluorescent protein fusion of FLO11 was expressed from the FLO11 promoter on a single-copy plasmid, fluorescence was observed in vivo at the periphery of cells. We propose that FLO11 encodes a flocculin because of its demonstrated role in flocculation, its structural similarity to other members of the FLO gene family, and the cell surface location of its product. FLO11 gene sequences are present in all yeast strains tested, including all standard laboratory strains, unlike the STA genes which are present only in the variant strain Saccharomyces cerevisiae var. diastaticus. FLO11 differs from all other yeast flocculins in that it is located near a centromere rather than a telomere, and its expression is regulated by mating type. Repression of FLO11-dependent flocculation in diploids is conferred by the mating-type repressor al/alpha2.

Role of the ABC transporter Ste6 in cell fusion during yeast conjugation

Though early stages of yeast conjugation are well-mimicked by treatment with pheromones, the final degradation of the cell wall and membrane fusion of mating that leads to cytoplasmic mixing may require separate signals. Mutations that blocked cell fusion during mating in Saccharomyces cerevisiae were identified in a multipartite screen. The three tightest mutations proved to be partial-function alleles of the ABC-transporter gene STE6 required for transport of a-factor. The ste6(cefl-1) allele was recovered and sequenced. The ste6(cefl-1) allele contained a stop codon predicted to truncate Ste6 at amino acid residue 862 (of 1290). The ste6(cef) mutations reduced, but did not eliminate, expression of a-factor. Light and electron microscopy revealed that unlike ste6 null mutations which block mating before the formation of mating pairs, the ste6(cef) (cell fusion) alleles permitted early steps in mating to proceed normally but blocked at a late stage in conjugation where mating partners were encased by a single cell wall and separated by only a thin layer of cell wall material we term the fusion wall. Morphologically the prezygotes appeared symmetrical with successful cell wall fusion at the periphery of the region of cell contact. Responses to a-factor were efficiently induced in partner cells under mating conditions as expected given the symmetric appearance of the prezygotes. A strain expressing a ste6(K1093A) mutation that conferred export of a twofold to fourfold higher level of a-factor than ste6(cef) did not accumulate prezygotes during mating which could indicate a tight threshold of a-factor signaling required for mating. However, mating to an sst2 partner which has a greatly increased sensitivity to a-factor did not suppress the fusion defect of a ste6(cef) strain. Overexpression of the structural gene for a-factor also did not suppress the fusion defect. It is possible that a-factor or STE6 play more complex roles in cell fusion.

The Candida albicans HYR1 gene, which is activated in response to hyphal development, belongs to a gene family encoding yeast cell wall proteins

A hyphally regulated gene (HYR1) from the dimorphic human pathogenic fungus Candida albicans was isolated and characterized. Northern (RNA) analyses showed that the HYR1 mRNA was induced specifically in response to hyphal development when morphogenesis was stimulated by serum addition and temperature elevation, increases in both culture pH and temperature, or N-acetylglucosamine addition. The HYR1 gene sequence revealed a 937-codon open reading frame capable of encoding a protein with an N-terminal signal sequence, a C-terminal glycosylphosphatidylinositol-anchoring domain, 17 potential N glycosylation sites, and a large domain rich in serine and threonine (51% of 230 residues). These features are observed in many yeast cell wall proteins, but no homologs are present in the databases. In addition, Hyr1p contained a second domain rich in glycine, serine, and asparagine (79% of 239 residues). The HYR1 locus in C. albicans CAI4 was disrupted by "Ura-blasting," but the resulting homozygous delta hyr1/delta hyr1 null mutant displayed no obvious morphological phenotype. The growth rates for yeast cells and hyphae and the kinetics of germ tube formation in the null mutant were unaffected. Aberrant expression of HYR1 in yeast cells, when an ADH1-HYR1 fusion was used, did not stimulate hyphal formation in C. albicans or pseudohyphal growth in Saccharomyces cerevisiae. HYR1 appears to encode a nonessential component of the hyphal cell wall.

Localization of a yeast-phase-specific gene product to the cell wall in Histoplasma capsulatum

A yeast-phase-specific gene, yps-3, has been identified in the virulent Histoplasma capsulatum strain, G217B. Although DNA sequencing of the genomic yps-3 gene from G217B failed to detect homologies with known proteins, the 5' end of a yps-3 cDNA contained a consensus signal sequence. A 519-bp fragment of the cDNA containing the translational stop codon was linker modified and inserted into the bacterial expression vector, pATH 1. Escherichia coli extracts containing the pATH 1 vector alone expressed a major 34-kDa TrpE polypeptide following induction with indoleacrylic acid, while the pATH 1/yps-3 construct produced a predominant 54-kDa TrpE/yps-3 fusion protein. Polyclonal rabbit sera directed against G217B reacted exclusively with the 54-kDa fusion protein in Western blots (immunoblots); serum samples from three patients with acute pulmonary or disseminated histoplasmosis were also positive. To localize the yps-3 protein within G217B, a monoclonal antibody (MAb 7.1) which recognized the yps-3 portion of the fusion protein was generated. A 17.4-kDa protein was detected with MAb 7.1 in Western blots prepared from cell wall fractions of G217B; cytoplasmic fractions were unreactive. No yps-3 antigen was detected in either fraction of the Downs strain, which fails to express the yps-3 gene. MAb 7.1 also detected a 17.4-kDa antigen in ethanol-precipitated culture supernatants derived from G217B. These findings localize the yps-3 gene product to the cell wall and culture supernatants, where the protein may influence the phase transition or the maintenance of the yeast state.

CWH41 encodes a novel endoplasmic reticulum membrane N-glycoprotein involved in beta 1,6-glucan assembly

CWH41 encodes a novel type II integral membrane N-glycoprotein located in the endoplasmic reticulum. Disruption of the CWH41 gene leads to a K1 killer toxin-resistant phenotype and a 50% reduction in the cell wall beta 1,6-glucan level. CWH41 also displays strong genetic interactions with KRE1 and KRE6, two genes known to be involved in the beta 1,6-glucan biosynthetic pathway. The cwh41 delta kre6 delta double mutant is nonviable; and the cwh41 delta kre1 delta double mutation results in strong synergistic defects, with a severely slow-growth phenotype, a 75% reduction in beta 1,6-glucan level, and the secretion of a cell wall glucomannoprotein, Cwp1p. These results provide strong genetic evidence indicating that Cwh41p plays a functional role, possibly as a new synthetic component, in the assembly of cell wall beta 1,6-glucan.

Identification of a ligand-binding site in an immunoglobulin fold domain of the Saccharomyces cerevisiae adhesion protein alpha-agglutinin

The Saccharomyces cerevisiae adhesion protein alpha-agglutinin (Ag alpha 1p) is expressed by alpha cells and binds to the complementary a-agglutinin expressed by a cells. The N-terminal half of alpha-agglutinin is sufficient for ligand binding and has been proposed to contain an immunoglobulin (Ig) fold domain. Based on a structural homology model for this domain and a previously identified critical residue (His292), we made Ag alpha 1p mutations in three discontinuous patches of the domain that are predicted to be in close proximity to His292 in the model. Residues in each of the three patches were identified that are important for activity and therefore define a putative ligand binding site, whereas mutations in distant loops had no effect on activity. This putative binding site is on a different surface of the Ig fold than the defined binding sites of immunoglobulins and other members of the Ig superfamily. Comparison of protein interaction sites by structural and mutational analysis has indicated that the area of surface contact is larger than the functional binding site identified by mutagenesis. The putative alpha-agglutinin binding site is therefore likely to identify residues that contribute to the functional binding site within a larger area that contacts a-agglutinin.

Homology modeling of an immunoglobulin-like domain in the Saccharomyces cerevisiae adhesion protein alpha-agglutinin

The Saccharomyces cerevisiae adhesion protein alpha-agglutinin is expressed by cells of alpha mating type. On the basis of sequence similarities, alpha-agglutinin has been proposed to contain variable-type immunoglobulin-like (IgV) domains. The low level of sequence similarity to IgV domains of known structure made homology modeling using standard sequence-based alignment algorithms impossible. We have therefore developed a secondary structure-based method that allowed homology modeling of alpha-aggulutinin domain III, the domain most similar to IgV domains. The model was assessed and where necessary refined to accommodate information obtained by biochemical and molecular genetic approaches, including the positions of a disulfide bond, glycosylation sites, and proteolytic sites. The model successfully predicted surface exposure of glycosylation and proteolytic sites, as well as identifying residues essential for binding activity. One side of the domain was predicted to be covered by carbohydrate residues. Surface accessibility and volume packing analyses showed that the regions of the model that have greatest sequence dissimilarity from the IgV consensus sequence are poorly structured in the biophysical sense. Nonetheless, the utility of the model suggests that these alignment and testing techniques should be of general use for building and testing of models of proteins that share limited sequence similarity with known structures.

Identification of six complementation classes involved in the biosynthesis of glycosylphosphatidylinositol anchors in Saccharomyces cerevisiae

Glycosylphosphatidylinositol (GPI)-anchored membrane proteins are synthesized by the posttranslational attachment of a preformed glycolipid to newly made glycoproteins. alpha-Agglutinin is a GPI-anchored glycoprotein that gets expressed at the cell surface of MAT alpha cells after induction with type a mating factor. Mutants affecting the biosynthesis of GPI anchors were obtained by selecting for the absence of alpha-agglutinin from the cell wall after induction with a-factor at 37 degrees C. 10 recessive mutants were grouped into 6 complementation classes, gpi4 to gpi9. Mutants are considered to be deficient in the biosynthesis of GPI anchors, since each mutant accumulates an abnormal, incomplete GPI glycolipid containing either zero, two, or four mannoses. One mutant accumulates a complete precursor glycolipid, suggesting that it might be deficient in the transfer of complete precursor lipids to proteins. When labeled with [2-3H]inositol, mutants accumulate reduced amounts of radiolabeled GPI-anchored proteins, and the export of the GPI-anchored Gas1p out of the ER is severely delayed in several mutant strains. On the other hand, invertase and acid phosphatase are secreted by all but one mutant. All mutants show an increased sensitivity to calcofluor white and hygromycin B. This suggests that GPI-anchored proteins are required for the integrity of the yeast cell wall.

Identification of three mannoproteins in the cell wall of Saccharomyces cerevisiae

Three glucanase-extractable cell wall proteins from Saccharomyces cerevisiae were purified, and their N-terminal amino acid sequences were determined. With this information, we were able to assign gene products to three known open reading frames (ORFs). The N-terminal sequence of a 55-kDa mannoprotein corresponded with the product of ORF YKL096w, which we named CWP1 (cell wall protein 1). A 80-kDa mannoprotein was identified as the product of the TIP1 gene, and a 180-kDa mannoprotein corresponded to the product of the ORF YKL444, which we named CWP2. CWP1, TIP1, and CWP2 encode proteins of 239, 210, and 92 amino acids, respectively. The C-terminal regions of these proteins all consist for more than 40% of serine/threonine and contain putative glycosylphosphatidylinositol attachment signals. Furthermore, Cwp1p and Tip1p were shown to carry a beta 1,6-glucose-containing side chain. The cwp2 deletion mutant displayed an increased sensitivity to Congo red, calcofluor white, and Zymolyase. Electron microscopic analysis of the cwp2 deletion mutant showed a strongly reduced electron-dense layer on the outside of the cell wall. These results indicate that Cwp2p is a major constituent of the cell wall and plays an important role in stabilizing the cell wall. Depletion of Cwp1p or Tip1p also caused increased sensitivities to Congo red and calcofluor white, but the effects were less pronounced than for cwp2 delta. All three cell wall proteins show a substantial homology with Srp1p, which also appears to be localized in the cell wall. We conclude that these four proteins are small structurally related cell wall proteins.

Glycosyl phosphatidylinositol-dependent cross-linking of alpha-agglutinin and beta 1,6-glucan in the Saccharomyces cerevisiae cell wall

The cell adhesion protein alpha-agglutinin is bound to the outer surface of the Saccharomyces cerevisiae cell wall and mediates cell-cell contact in mating. alpha-Agglutinin is modified by addition of a glycosyl phosphatidylinositol (GPI) anchor as it traverses the secretory pathway. The presence of a GPI anchor is essential for cross-linking into the wall, but the fatty acid and inositol components of the anchor are lost before cell wall association (Lu, C.-F., J. Kurjan, and P. N. Lipke, 1994. A pathway for cell wall anchorage of Saccharomyces cerevisiae alpha-agglutinin. Mol. Cell. Biol. 14:4825-4833). Cell wall association of alpha-agglutinin was accompanied by an increase in size and a gain in reactivity to antibodies directed against beta 1,6-glucan. Several kre mutants, which have defects in synthesis of cell wall beta 1,6-glucan, had reduced molecular size of cell wall alpha-agglutinin. These findings demonstrate that the cell wall form of alpha-agglutinin is covalently associated with beta 1,6-glucan. The alpha-agglutinin biosynthetic precursors did not react with antibody to beta 1,6-glucan, and the sizes of these forms were unaffected in kre mutants. A COOH-terminal truncated form of alpha-agglutinin, which is not GPI anchored and is secreted into the medium, did not react with the anti-beta 1,6-glucan. We propose that extracellular cross-linkage to beta 1,6-glucan mediates covalent association of alpha-agglutinin with the cell wall in a manner that is dependent on prior addition of a GPI anchor to alpha-agglutinin.

MID1, a novel Saccharomyces cerevisiae gene encoding a plasma membrane protein, is required for Ca2+ influx and mating

By establishing a unique screening method, we have isolated yeast mutants that die only after differentiating into cells with a mating projection, and some of them are also defective in Ca2+ signaling. The mutants were classified into five complementation groups, one of which we studied extensively. This mutation defines a new gene, designated MID1, which encodes an N-glycosylated, integral plasma membrane protein with 548 amino acid residues. The mid1-1 mutant has low Ca2+ uptake activity, loses viability after receiving mating pheromones, and escapes death when incubated with high concentrations of CaCl2. The MID1 gene is nonessential for vegetative growth. The efficiency of mating between MATa mid1-1 and MAT alpha mid1-1 cells is low. These results demonstrate that MID1 is required for Ca2+ influx and mating.

MID1, a novel Saccharomyces cerevisiae gene encoding a plasma membrane protein, is required for Ca2+ influx and mating

By establishing a unique screening method, we have isolated yeast mutants that die only after differentiating into cells with a mating projection, and some of them are also defective in Ca2+ signaling. The mutants were classified into five complementation groups, one of which we studied extensively. This mutation defines a new gene, designated MID1, which encodes an N-glycosylated, integral plasma membrane protein with 548 amino acid residues. The mid1-1 mutant has low Ca2+ uptake activity, loses viability after receiving mating pheromones, and escapes death when incubated with high concentrations of CaCl2. The MID1 gene is nonessential for vegetative growth. The efficiency of mating between MATa mid1-1 and MAT alpha mid1-1 cells is low. These results demonstrate that MID1 is required for Ca2+ influx and mating.

Making a connection: direct binding between keratin intermediate filaments and desmosomal proteins

In epidermal cells, keratin intermediate filaments connect with desmosomes to form extensive cadherin-mediated cytoskeletal architectures. Desmoplakin (DPI), a desmosomal component lacking a transmembrane domain, has been implicated in this interaction, although most studies have been conducted with cells that contain few or no desmosomes, and efforts to demonstrate direct interactions between desmoplakin and intermediate filaments have not been successful. In this report, we explore the biochemical nature of the connections between keratin filaments and desmosomes in epidermal keratinocytes. We show that the carboxy terminal "tail" of DPI associates directly with the amino terminal "head" of type II epidermal keratins, including K1, K2, K5, and K6. We have engineered and purified recombinant K5 head and DPI tail, and we demonstrate direct interaction in vitro by solution-binding assays and by ligand blot assays. This marked association is not seen with simple epithelial type II keratins, vimentin, or with type I keratins, providing a possible explanation for the greater stability of the epidermal keratin filament architecture over that of other cell types. We have identified an 18-amino acid residue stretch in the K5 head that is conserved only among type II epidermal keratins and that appears to play some role in DPI tail binding. This finding might have important implications for understanding a recent point mutation found within this binding site in a family with a blistering skin disorder.

A pathway for cell wall anchorage of Saccharomyces cerevisiae alpha-agglutinin

Saccharomyces cerevisiae alpha-agglutinin is a cell wall-anchored adhesion glycoprotein. The previously identified 140-kDa form, which contains a glycosyl-phosphatidylinositol (GPI) anchor (D. Wojciechowicz, C.-F. Lu, J. Kurjan, and P. N. Lipke, Mol. Cell. Biol. 13:2554-2563, 1993), and additional forms of 80, 150, 250 to 300, and > 300 kDa had the properties of intermediates in a transport and cell wall anchorage pathway. N glycosylation and additional modifications resulted in successive increases in size during transport. The 150- and 250- to 300-kDa forms were membrane associated and are likely to be intermediates between the 140-kDa form and a cell surface GPI-anchored form of > 300 kDa. A soluble form of > 300 kDa that lacked the GPI anchor had properties of a periplasmic intermediate between the plasma membrane form and the > 300-kDa cell wall-anchored form. These results constitute experimental support for the hypothesis that GPI anchors act to localize alpha-agglutinin to the plasma membrane and that cell wall anchorage involves release from the GPI anchor to produce a periplasmic intermediate followed by linkage to the cell wall.

A pathway for cell wall anchorage of Saccharomyces cerevisiae alpha-agglutinin

Saccharomyces cerevisiae alpha-agglutinin is a cell wall-anchored adhesion glycoprotein. The previously identified 140-kDa form, which contains a glycosyl-phosphatidylinositol (GPI) anchor (D. Wojciechowicz, C.-F. Lu, J. Kurjan, and P. N. Lipke, Mol. Cell. Biol. 13:2554-2563, 1993), and additional forms of 80, 150, 250 to 300, and > 300 kDa had the properties of intermediates in a transport and cell wall anchorage pathway. N glycosylation and additional modifications resulted in successive increases in size during transport. The 150- and 250- to 300-kDa forms were membrane associated and are likely to be intermediates between the 140-kDa form and a cell surface GPI-anchored form of > 300 kDa. A soluble form of > 300 kDa that lacked the GPI anchor had properties of a periplasmic intermediate between the plasma membrane form and the > 300-kDa cell wall-anchored form. These results constitute experimental support for the hypothesis that GPI anchors act to localize alpha-agglutinin to the plasma membrane and that cell wall anchorage involves release from the GPI anchor to produce a periplasmic intermediate followed by linkage to the cell wall.

Mutational activation of the STE5 gene product bypasses the requirement for G protein beta and gamma subunits in the yeast pheromone response pathway

The STE5 gene encodes an essential element of the pheromone response pathway which is known to act either after the G subunit encoded by the STE4 gene or at the same step. Mutations in STE5, designated STE5Hyp, that partially activate the pathway in the absence of pheromone were isolated. One allele (STE5Hyp-2) was shown to cause a single amino acid substitution near the N terminus of the predicted STE5 protein. Immunoblotting with anti-Ste5 antibodies indicated that the phenotype was not due to an increased level of the mutant STE5 protein. A multicopy episomal plasmid containing a STE5Hyp allele partially suppressed both the block in pheromone-inducible transcription and the sterility phenotype caused by null alleles of the STE2, STE4, or STE18 gene, indicating that the STE5 product acts after the receptor (STE2 product) and after the G protein beta and gamma subunits (STE4 and STE18 products, respectively). However, the phenotypes of the STE5Hyp mutations were less pronounced in ste4 and ste18 mutants, suggesting that the STE5Hyp-generated signal partially depends on the proposed G beta gamma complex. The STE5Hyp alleles did not suppress ste7, ste11, ste12, or fus3 kss1 null mutants, consistent with previous findings that the STE5 product acts before the protein kinases encoded by STE7, STE11, FUS3, and KSS1 and the transcription factor encoded by STE12. The mating defects of the ste2 deletion mutant and the temperature-sensitive ste4-3 mutant were also suppressed by overexpression of wild-type STE5. The slow-growth phenotype manifested by cells carrying STE5Hyp alleles was enhanced by the sst2-1 mutation; this effect was eliminated in ste4 mutants. These results provide the first evidence that the STE5 gene product performs its function after the G protein subunits.