Antimicrobial Activity of Arthrospira (Former Spirulina) and Dunaliella Related to Recognized Antimicrobial Bioactive Compounds

With the increasing rate of the antimicrobial resistance phenomenon, natural products gain our attention as potential drug candidates. Apart from being used as nutraceuticals and for biotechnological purposes, microalgae and phytoplankton have well-recognized antimicrobial compounds and proved anti-infectious potential. In this review, we comprehensively outline the antimicrobial activity of one genus of cyanobacteria (Arthrospira, formerly Spirulina) and of eukaryotic microalgae (Dunaliella). Both, especially Arthrospira, are mostly used as nutraceuticals and as a source of antioxidants for health supplements, cancer therapy and cosmetics. Their diverse bioactive compounds provide other bioactivities and potential for various medical applications. Their antibacterial and antifungal activity vary in a broad range and are strain specific. There are strains of Arthrospira platensis with very potent activity and minimum inhibitory concentrations (MICs) as low as 2-15 µg/mL against bacterial fish pathogens including Bacillus and Vibrio spp. Arthrospira sp. has demonstrated an inhibition zone (IZ) of 50 mm against Staphylococcus aureus. Remarkable is the substantial amount of in vivo studies of Arthrospira showing it to be very promising for preventing vibriosis in shrimp and Helicobacter pylori infection and for wound healing. The innovative laser irradiation of the chlorophyll it releases can cause photodynamic destruction of bacteria. Dunaliella salina has exhibited MIC values lower than 300 µg/mL and an IZ value of 25.4 mm on different bacteria, while Dunaliella tertiolecta has demonstrated MIC values of 25 and 50 μg/mL against some Staphylococcus spp. These values fulfill the criteria for significant antimicrobial activity and sometimes are comparable or exceed the activity of the control antibiotics. The bioactive compounds which are responsible for that action are fatty acids including PUFAs, polysaccharides, glycosides, peptides, neophytadiene, etc. Cyanobacteria, such as Arthrospira, also particularly have antimicrobial flavonoids, terpenes, alkaloids, saponins, quinones and some unique-to-them compounds, such as phycobiliproteins, polyhydroxybutyrate, the peptide microcystin, etc. These metabolites can be optimized by using stress factors in a two-step process of fermentation in closed photobioreactors (PBRs).

Screening of Microalgae for Bioactivity with Antiviral, Antibacterial, Anti-Inflammatory and Anti-Cancer Assays

Marine microalgae are a rich reservoir of natural compounds, including bioactives. Nonetheless, these organisms remain fairly unexplored despite their potential biotechnological applications. Culture collections with diverse taxonomic groups and lifestyles are a good source to unlock this potential and discover new molecules for multiple applications such as the treatment of human pathologies or the production of aquaculture species. In the present work extracts from thirty-three strains (including twenty dinoflagellates, four diatoms and nine strains from seven other algal classes), cultivated under identical conditions, were examined for their antiviral, antibacterial, anti-inflammatory and anti-cancer activities. Among these, antiviral and anti-inflammatory activities were detected in a few strains while the antibacterial tests showed positive results in most assays. In turn, most trials did not show any anti-cancer activity. Significant differences were observed between species within the same class, in particular dinoflagellates, which were better represented in this study. These preliminary findings pave the way for an in-depth characterization of the extracts with highest signals in each test, the identification of the compounds responsible for the biological activities found and a further screening of the CCVIEO culture collection.

Mass Cultivation of Microalgae: II. A Large Species Pulsing Blue Light Concept

If mass cultivation of photoautotrophic microalgae is to gain momentum and find its place in the new "green future", exceptional optimizations to reduce production costs must be implemented. Issues related to illumination should therefore constitute the main focus, since it is the availability of photons in time and space that drives synthesis of biomass. Further, artificial illumination (e.g., LEDs) is needed to transport enough photons into dense algae cultures contained in large photobioreactors. In the present research project, we employed short-term O₂ production and 7-day batch cultivation experiments to evaluate the potential to reduce illumination light energy by applying blue flashing light to cultures of large and small diatoms. Our results show that large diatom cells allow more light penetration for growth compared to smaller cells. PAR (400-700 nm) scans yielded twice as much biovolume-specific absorbance for small biovolume (avg. 7070 μm³) than for large biovolume (avg. 18,703 μm³) cells. The dry weight (DW) to biovolume ratio was 17% lower for large than small cells, resulting in a DW specific absorbance that was 1.75 times higher for small cells compared to large cells. Blue 100 Hz square flashing light yielded the same biovolume production as blue linear light in both the O₂ production and batch experiments at the same maximum light intensities. We therefore suggest that, in the future, more focus should be placed on researching optical issues in photobioreactors, and that cell size and flashing blue light should be central in this.

Label-free multiphoton imaging flow cytometry

Label-free imaging flow cytometry is a powerful tool for biological and medical research as it overcomes technical challenges in conventional fluorescence-based imaging flow cytometry that predominantly relies on fluorescent labeling. To date, two distinct types of label-free imaging flow cytometry have been developed, namely optofluidic time-stretch quantitative phase imaging flow cytometry and stimulated Raman scattering (SRS) imaging flow cytometry. Unfortunately, these two methods are incapable of probing some important molecules such as starch and collagen. Here, we present another type of label-free imaging flow cytometry, namely multiphoton imaging flow cytometry, for visualizing starch and collagen in live cells with high throughput. Our multiphoton imaging flow cytometer is based on nonlinear optical imaging whose image contrast is provided by two optical nonlinear effects: four-wave mixing (FWM) and second-harmonic generation (SHG). It is composed of a microfluidic chip with an acoustic focuser, a lab-made laser scanning SHG-FWM microscope, and a high-speed image acquisition circuit to simultaneously acquire FWM and SHG images of flowing cells. As a result, it acquires FWM and SHG images (100 × 100 pixels) with a spatial resolution of 500 nm and a field of view of 50 μm × 50 μm at a high event rate of four to five events per second, corresponding to a high throughput of 560-700 kb/s, where the event is defined by the passage of a cell or a cell-like particle. To show the utility of our multiphoton imaging flow cytometer, we used it to characterize Chromochloris zofingiensis (NIES-2175), a unicellular green alga that has recently attracted attention from the industrial sector for its ability to efficiently produce valuable materials for bioplastics, food, and biofuel. Our statistical image analysis found that starch was distributed at the center of the cells at the early cell cycle stage and became delocalized at the later stage. Multiphoton imaging flow cytometry is expected to be an effective tool for statistical high-content studies of biological functions and optimizing the evolution of highly productive cell strains.

Microalgae as a potential therapeutic drug candidate for neurodegenerative diseases

Microalgae are highly photosynthetic unicellular organism that have increased demand in the recent days owing to the presence of valuable cellular metabolites. They are ubiquitous in terrestrial and aquatic habitats, rich in species diversity and are capable of generating significant biomass by efficiently using CO₂, light and other nutrients like nitrogen, phosphate etc., The microalgal biomass has upsurged in economic potential and is used as both food and feed in many countries across the world, accounting for more than 75 % of annual microalgal biomass production in the past decades. The microalgal cells are sustainable resource that synthesize various secondary metabolites such as carotenoids, polysaccharides, polyphenols, essential amino acids, sterols, and polyunsaturated fatty acids (PUFA). Microalgae and its derived compounds possess significant pharmacological and biological effects such as antioxidant, anti-inflammatory, anti-cancer, immunomodulatory and anti-obesity. Because of their potential health promoting properties, the utilization of microalgae and its derived substances in food, pharmaceutical and cosmetic industries has skyrocketed in recent years. In this context, the current review discusses about the benefits of microalgae and its bioactive compounds against several neurodegenerative disorders like Alzheimer's disease (AD), Parkinson's disease (PD), Huntington's disease (HD), and amyotrophic lateral sclerosis (ALS).

Bioprospecting microalgae and cyanobacteria for biopharmaceutical applications

Microalgae and cyanobacteria have sparked a lot of interest due to their potential in various industries like biorefineries, biopharmaceuticals, food supplements, nutraceuticals, and other high-value products. Polysaccharides, vitamins, proteins, enzymes, and steroids are valuable products isolated from microalgae and cyanobacteria and potentially used in health and biomedical applications. Bioactive compounds derived from microalgae and cyanobacteria exhibit various pharmaceutical properties like antibacterial, anticancer, antiviral, antialgal, and antioxidant. From the properties listed above, the research for novel antibiotics has become particularly appropriate. In addition, the possible emergence of resistance against pathogens, as well as the potential decline in antibiotic efficacy, has prompted researchers to look for a new source of antibiotics. Microalgae and cyanobacteria have indicated a great and unexplored potential among these sources. For this reason, microalgae and cyanobacteria have been highlighted for their efficiency in different industrial sectors, as well as for their potential uses in the betterment of human and environmental health. This review gives an overview of bioactive compounds and metabolites with several biological properties isolated from microalgae and cyanobacteria for treating different animal and human diseases.

Comparative study of structures and functional motifs in lectins from the commercially important photosynthetic microorganisms

Photosynthetic microorganisms, specifically cyanobacteria and microalgae, can synthesize a vast array of biologically active molecules, such as lectins, that have great potential for various biotechnological and biomedical applications. However, since the structures of these proteins are not well established, likely due to the presence of intrinsically disordered regions, our ability to better understand their functionality is hampered. We embarked on a study of the carbohydrate recognition domain (CRD), intrinsically disordered regions (IDRs), amino acidic composition, as well as and functional motifs in lectins from cyanobacteria of the genus Arthrospira and microalgae Chlorella and Dunaliella genus using a combination of bioinformatics techniques. This search revealed the presence of five distinctive CRD types differently distributed between the genera. Most CRDs displayed a group-specific distribution, except to C. sorokiniana possessing distinctive CRD probably due to its specific lifestyle. We also found that all CRDs contain short IDRs. Bacterial lectin of Arthrospira prokarionte showed lower intrinsic disorder and proline content when compared to the lectins from the eukaryotic microalgae (Chlorella and Dunaliella). Among the important functions predicted in all lectins were several specific motifs, which directly interacts with proteins involved in the cell-cycle control and which may be used for pharmaceutical purposes. Since the aforementioned properties of each type of lectin were investigated in silico, they need experimental confirmation. The results of our study provide an overview of the distribution of CRD, IDRs, and functional motifs within lectin from the commercially important microalgae.

Real‐Time NMR Recording of Fermentation and Lipid Metabolism Processes in Live Microalgae Cells

Non‐invasive and real‐time recording of processes in living cells has been limited to detection of small cellular components such as soluble proteins and metabolites. Here we report a multiphase NMR approach using magic‐angle spinning NMR to synchronously follow microbial processes of fermentation, lipid metabolism and structural dynamic changes in live microalgae cells. Chlamydomonas reinhardtii green algae were highly concentrated, introducing dark fermentation and anoxia conditions. Single‐pulse NMR experiments were applied to obtain temperature‐dependent kinetic profiles of the formed fermentation products. Through dynamics‐based spectral editing NMR, simultaneous conversion of galactolipids into TAG and free fatty acids was observed and rapid loss of rigid lipid structures. This suggests that lipolysis under dark and anoxia conditions finally results in the breakdown of cell and organelle membranes, which could be beneficial for recovery of intracellular microbial useful products.

Mass Cultivation of Microalgae: I. Experiences with Vertical Column Airlift Photobioreactors, Diatoms and CO2 Sequestration

From 2015 to 2021, we optimized mass cultivation of diatoms in our own developed vertical column airlift photobioreactors using natural and artificial light (LEDs). The project took place at the ferrosilicon producer Finnfjord AS in North Norway as a joint venture with UiT—The Arctic University of Norway. Small (0.1–6–14 m3) reactors were used for initial experiments and to produce inoculum cultures while upscaling experiments took place in a 300 m3 reactor. We here argue that species cultivated in reactors should be large since biovolume specific self-shadowing of light can be lower for large vs. small cells. The highest production, 1.28 cm3 L−1 biovolume (0.09–0.31 g DW day−1), was obtained with continuous culture at ca. 19% light utilization efficiency and 34% CO2 uptake. We cultivated 4–6 months without microbial contamination or biofouling, and this we argue was due to a natural antifouling (anti-biofilm) agent in the algae. In terms of protein quality all essential amino acids were present, and the composition and digestibility of the fatty acids were as required for feed ingredients. Lipid content was ca. 20% of ash-free DW with high EPA levels, and omega-3 and amino acid content increased when factory fume was added. The content of heavy metals in algae cultivated with fume was well within the accepted safety limits. Organic pollutants (e.g., dioxins and PCBs) were below the limits required by the European Union food safety regulations, and bioprospecting revealed several promising findings.

Algae biotechnology for industrial wastewater treatment, bioenergy production, and high-value bioproducts

A growing world population is causing hazardous compounds to form at an increasingly rapid rate, calling for ecological action. Wastewater management and treatment is an expensive process that requires appropriate integration technology to make it more feasible and cost-effective. Algae are of great interest as potential feedstocks for various applications, including environmental sustainability, biofuel production, and the manufacture of high-value bioproducts. Bioremediation with microalgae is a potential approach to reduce wastewater pollution. The need for effective nutrient recovery, greenhouse gas reduction, wastewater treatment, and biomass reuse has led to a wide interest in the use of microalgae for wastewater treatment. Furthermore, algae biomass can be used to produce bioenergy and high-value bioproducts. The use of microalgae as medicine (production of bioactive and medicinal compounds), biofuels, biofertilizers, and food additives has been explored by researchers around the world. Technological and economic barriers currently prevent the commercial use of algae, and optimal downstream processes are needed to reduce production costs. Therefore, the simultaneous use of microalgae for wastewater treatment and biofuel production could be an economical approach to address these issues. This article provides an overview of algae and their application in bioremediation, bioenergy production, and bioactive compound production. It also highlights the current problems and opportunities in the algae-based sector, which has recently become quite promising.

Bio-membrane integrated systems for nitrogen recovery from wastewater in circular bioeconomy

Wastewater contains a significant amount of recoverable nitrogen. Hence, the recovery of nitrogen from wastewater can provide an option for generating some revenue by applying the captured nitrogen to producing bio-products, in order to minimize dangerous or environmental pollution consequences. The circular bio-economy can achieve greater environmental and economic sustainability through game-changing technological developments that will improve municipal wastewater management, where simultaneous nitrogen and energy recovery are required. Over the last decade, substantial efforts were undertaken concerning the recovery of nitrogen from wastewater. For example, bio-membrane integrated system (BMIS) which integrates biological process and membrane technology, has attracted considerable attention for recovering nitrogen from wastewater. In this review, current research on nitrogen recovery using the BMIS are compiled whilst the technologies are compared regarding their energy requirement, efficiencies, advantages and disadvantages. Moreover, the bio-products achieved in the nitrogen recovery system processes are summarized in this paper, and the directions for future research are suggested. Future research should consider the quality of recovered nitrogenous products, long-term performance of BMIS and economic feasibility of large-scale reactors. Nitrogen recovery should be addressed under the framework of a circular bio-economy.

Thermo resistant antioxidants from photoautotrophic microorganisms: screening and characterization

The demand for natural antioxidants to be used in food industry is increasing, as synthetic antioxidants are toxic and have high production costs. Specifically, food processing and preservation require antioxidants resistant to thermal sterilization processes. In this study, twenty-five strains among microalgae and cyanobacteria were screened as antioxidants producers. The species Enallax sp., Synechococcus bigranulatus and Galdieria sulphuraria showed the highest content of chlorophyll a and total carotenoids. In vitro stability and antioxidant activity of the ethanolic extracts were performed. The results revealed that pigments present in the extracts, obtained from the previously mentioned species, were stable at room temperature and exhibited in vitro free radical scavenging potential with IC₅₀ values of 0.099 ± 0.001, 0.048 ± 0.001 and 0.13 ± 0.02 mg mL^-1, respectively. Biocompatibility assay showed that the extracts were not toxic on immortalized cell lines. The antioxidant activity was also tested on a cell-based model by measuring intracellular ROS levels after sodium arsenite treatment. Noteworthy, extracts were able to exert the same protective effect, before and after the pasteurization process. Results clearly indicate the feasibility of obtaining biologically active and thermostable antioxidants from microalgae. Green solvents can be used to obtain thermo-resistant antioxidants from cyanobacteria and microalgae which can be used in the food industry. Thus, the substitution of synthetic pigments with natural ones is now practicable.

Nutritional conditions of the novel freshwater Coccomyxa AP01 for versatile fatty acids composition

AIMS

This study was to analyse the biomass production and fatty acids (FAs) profiles in a newly isolated chlorophyte, namely Coccomyxa AP01, under nutritionally balanced (NB) conditions (comparing nitrate and urea as nitrogen sources) and nitrogen or phosphate deprivation.

METHODS AND RESULTS

Lipid yields was about 30%-40% of dried biomasses in all examined nutritional conditions. Under NB conditions, lipids were principally constituted by monounsaturated FAs, mainly represented by oleic acid, and saturated and polyunsaturated FAs at similar concentrations. Nutrients deprivation induced remarkable changes in FAs profiles, with the highest amounts of saturated (42%-46%), followed by similar amounts of monounsaturated and polyunsaturated, and the emergence of rare long-chain FAs. Under phosphate deprivation, biomass yield was similar to NB conditions, with the highest yield of saturated (mainly palmitic acid) and of polyunsaturated FAs (33%) (mainly linoleic and linolenic acids).

CONCLUSIONS

Balanced or deprived nutritional conditions in Coccomyxa AP01 induced a selective production and composition of FAs. The phosphate-deprivation condition concomitantly provided high biomass yield and the production of high value saturated and polyunsaturated FAs with industrial interest.

SIGNIFICANCE AND IMPACT OF THE STUDY

Coccomyxa AP01 could be considered a promising source of different FAs, including also docosapentaenoic acid, for several commercial purposes spanning from biodiesel production, pharmaceutical and cosmetic applications to innovative aquaculture fish feeds.

Microalgae starch: A promising raw material for the bioethanol production

Ethanol is currently the most successful biofuel and can be produced from microalgal biomass (third-generation). Ethanol from microalgal biomass has advantages because it does not use arable land and reduces environmental impacts through the sequestration of CO₂ from the atmosphere. In this way, micro and macroalgal starch, which is structurally similar to that from higher plants can be considered a promise raw material for the production of bioethanol. Thus, strategies can be used to intensify the carbohydrate concentration in the microalgal biomass enabling the production of third-generation bioethanol. The microalgae biomass can be destined to biorefineries so that the residual biomass generated from the extraction processes is used for the production of high value-added products. Therefore, the process will have an impact on reducing the production costs and the generation of waste. In this context, this review aims to bring concepts and perspectives on the production of third-generation bioethanol, demonstrating the microalgal biomass potential as a carbon source to produce bioethanol and supply part of the world energy demand. The main factors that influence the microalgal cultivation and fermentation process, as well as the processes of transformation of biomass into the easily fermentable substrate are also discussed.

Comprehensive GCMS and LC-MS/MS Metabolite Profiling of Chlorella vulgaris

The commercial cultivation of microalgae began in the 1960s and Chlorella was one of the first target organisms. The species has long been considered a potential source of renewable energy, an alternative for phytoremediation, and more recently, as a growth and immune stimulant. However, Chlorella vulgaris, which is one of the most studied microalga, has never been comprehensively profiled chemically. In the present study, comprehensive profiling of the Chlorella vulgaris metabolome grown under normal culture conditions was carried out, employing tandem LC-MS/MS to profile the ethanolic extract and GC-MS for fatty acid analysis. The fatty acid profile of C. vulgaris was shown to be rich in omega-6, -7, -9, and -13 fatty acids, with omega-6 being the highest, representing more than sixty percent (>60%) of the total fatty acids. This is a clear indication that this species of Chlorella could serve as a good source of nutrition when incorporated in diets. The profile also showed that the main fatty acid composition was that of C₁₆-C₁₈ (>92%), suggesting that it might be a potential candidate for biodiesel production. LC-MS/MS analysis revealed carotenoid constituents comprising violaxanthin, neoxanthin, lutein, β-carotene, vulgaxanthin I, astaxanthin, and antheraxanthin, along with other pigments such as the chlorophylls. In addition to these, amino acids, vitamins, and simple sugars were also profiled, and through mass spectrometry-based molecular networking, 48 phospholipids were putatively identified.

Photosynthetic Carbon Partitioning and Metabolic Regulation in Response to Very-Low and High CO2 in Microchloropsis gaditana NIES 2587

Photosynthetic organisms fix inorganic carbon through carbon capture machinery (CCM) that regulates the assimilation and accumulation of carbon around ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco). However, few constraints that govern the central carbon metabolism are regulated by the carbon capture and partitioning machinery. In order to divert the cellular metabolism toward lipids and/or biorenewables it is important to investigate and understand the molecular mechanisms of the CO2-driven carbon partitioning. In this context, strategies for enhancement of CO2 fixation which will increase the overall biomass and lipid yields, can provide clues on understanding the carbon assimilation pathway, and may lead to new targets for genetic engineering in microalgae. In the present study, we have focused on the physiological and metabolomic response occurring within marine oleaginous microalgae Microchloropsis gaditana NIES 2587, under the influence of very-low CO2 (VLC; 300 ppm, or 0.03%) and high CO2 (HC; 30,000 ppm, or 3% v/v). Our results demonstrate that HC supplementation in M. gaditana channelizes the carbon flux toward the production of long chain polyunsaturated fatty acids (LC-PUFAs) and also increases the overall biomass productivities (up to 2.0 fold). Also, the qualitative metabolomics has identified nearly 31 essential metabolites, among which there is a significant fold change observed in accumulation of sugars and alcohols such as galactose and phytol in VLC as compared to HC. In conclusion, our focus is to understand the entire carbon partitioning and metabolic regulation within these photosynthetic cell factories, which will be further evaluated through multiomics approach for enhanced productivities of biomass, biofuels, and bioproducts (B3).

Morphological characterization, growth appraisal, and probing biofuels potential of newly isolated Scenedesmus sp. from desert Cholistan

Microalgae have an excellent potential for producing valuable natural products, including biofuels. Therefore, it is imperative to explore and document the existing microalgal flora and utilize their potentials to cope the increasing human needs. The present work aims at exploring and characterizing newly isolated microalgae from desert Cholistan, a habitat with myriad algal diversity. Light microscopy, scanning electron microscopy, and molecular phylogenetic approaches were used for species-level identification. Characterization and growth optimization of Scendesmus sp. were analyzed under three different growth modes to determine the most favorable conditions for increasing biomass, growth rate, and lipid content. The results revealed that mixotrophic (MT) mode significantly increases photosynthetic activity, growth rate, and lipid content with glycerol as supplement carbon source. The investigated Scenedesmus dimorphous produced a maximum dry weight of 1.73 g L^-1 , improved fatty acid methyl esters profile and yield lipid up to 40% of DCW (68 g L^-1 ) under MT mode, which is almost double to that of photoautotrophic cultivation. The glycerol availability in medium has been identified as the critical element for boosting growth and lipid content. Thus, it can reduce the cost of biofuel production.

Bacterial cellulose production by Komagataeibacter hansenii using algae-based glucose

Bacterial cellulose (BC) is a homopolymer and it is distinguished from plant-based cellulose by its unique properties such as high purity, high crystallinity, high water-holding capacity, and good biocompatibility. Microalgae are unicellular, photosynthetic microorganisms and are known to have high protein, starch, and oil content. In this study, Chlorella vulgaris was evaluated as source of glucose for the production of BC. To increase the starch content of algae the effect of nutrient starvation (nitrogen and sulfur) and light deficiency were tested in a batch assay. The starch contents (%) were 5.27 ± 0.04, 7.14 ± 0.18, 5.00 ± 0.08, and 1.35 ± 0.04 for normal cultivation, nitrogen starvation, sulfur starvation, and dark cultivation conditions, respectively. The performance of enzymatic and acidic methods was compared for the starch hydrolysis. This study demonstrated for the first time that acid hydrolysate of algal starch can be used to substitute glucose in the fermentation medium of Komagataeibacter hansenii for BC production. Glucose was used as a control for BC production. BC production yields on dry weight basis were 1.104 ± 0.002 g/L and 1.202 ± 0.005 g/L from algae-based glucose and glucose, respectively. The characterization of both BCs produced from glucose and algae-based glucose was investigated by scanning electron microscopy and Fourier transform infrared spectroscopy. The results have shown that the structural characteristics of algae-based BC were comparable to those of glucose-based BC.

A novel genetic engineering platform for the effective management of biological contaminants for the production of microalgae

Microalgal cultivation that takes advantage of solar energy is one of the most cost-effective systems for the biotechnological production of biofuels, and a range of high value products, including pharmaceuticals, fertilizers and feed. However, one of the main constraints for the cultivation of microalgae is the potential contamination with biological pollutants, such as bacteria, fungi, zooplankton or other undesirable microalgae. In closed bioreactors, the control of contamination requires the sterilization of the media, containers and all materials, which increases the cost of production, whereas open pond systems severely limits the number of species that can be cultivated under extreme environmental conditions to prevent contaminations. Here, we report the metabolic engineering of Chlamydomonas reinhardtii to use phosphite as its sole phosphorus source by expressing the ptxD gene from Pseudomonas stutzeri WM88, which encodes a phosphite oxidoreductase able to oxidize phosphite into phosphate using NAD as a cofactor. Engineered C. reinhardtii lines are capable of becoming the dominant species in a mixed culture when fertilized with phosphite as a sole phosphorus source. Our results represent a new platform for the production of microalgae, potentially useful for both closed photobioreactors and open pond systems without the need for using sterile conditions nor antibiotics or herbicides to prevent contamination with biological pollutants.

Manipulation of nitrogen levels and mode of cultivation are viable methods to improve the lipid, fatty acids, phytochemical content, and bioactivities in Chlorella minutissima

The effect of nitrogen (N: low = 2% N or moderate = 10% N) levels and cultivation (photoautotrophic or mixotrophic) modes on the biochemicals in Chlorella minutissima was evaluated using a mass culture system. Moderate N and mixotrophic cultures had higher biomass, protein, carbohydrate content and photosynthetic pigments than the low N and photoautotrophic treatments. In contrast, lipid and fatty acid content of the low N and photoautotrophic treatments were higher than in the moderate N and mixotrophic cultures. More phytochemicals were accumulated in moderate N and mixotrophic cultures which corresponded to better antioxidant capacity in the extracts. The most potent (0.7 mg · mL(-1) ) acetylcholinesterase inhibitory activity was displayed by moderate N and mixotrophic treatment. Approximately 60% of the extracts exhibited a noteworthy antimicrobial activity regardless of the N levels and cultivation modes. Thus, moderate N level enhanced the phytochemicals and biological activities of C. minutissima cultured under a mixotrophic system.

Scan-Free Absorbance Spectral Imaging A(x, y, λ) of Single Live Algal Cells for Quantifying Absorbance of Cell Suspensions

Label-free, non-invasive, rapid absorbance spectral imaging A(x,y,λ) microscopy of single live cells at 1.2 μm × 1.2 μm resolution with an NA = 0.85 objective was developed and applied to unicellular green algae Chlamydomonas reinhardtii. By introducing the fiber assembly to rearrange a two-dimensional image to the one-dimensional array to fit the slit of an imaging spectrograph equipped with a CCD detector, scan-free acquisition of three-dimensional information of A(x,y,λ) was realized. The space-resolved absorbance spectra of the eyespot, an orange organelle about 1 μm, were extracted from the green-color background in a chlorophyll-rich single live cell absorbance image. Characteristic absorbance change in the cell suspension after hydrogen photoproduction in C. reinhardtii was investigated to find a single 715-nm absorption peak was locally distributed within single cells. The formula to calculate the absorbance of cell suspensions from that of single cells was presented to obtain a quantitative, parameter-free agreement with the experiment. It is quantitatively shown that the average number of chlorophylls per cell is significantly underestimated when it is evaluated from the absorbance of the cell suspensions due to the package effect.

Isolation and screening of heterocystous cyanobacterial strains for biodiesel production by evaluating the fuel properties from fatty acid methyl ester (FAME) profiles

This study reports on the biodiesel quality parameters of eleven heterocystous cyanobacterial strains based on fatty acid methyl esters (FAME) profiles. The biomass productivity of the tested cyanobacterial strains ranged from 9.33 to 20.67 mg L(-1) d(-1) while the lipid productivity varied between 0.65 and 2.358 mg L(-1) d(-1). The highest biomass and lipid productivity was observed for Calothrix sp. MBDU 013 but its lipid content is only 11.221 in terms of percent dry weight, next to the Anabaena sphaerica MBDU 105, whose lipid content is high. To identify the most competent isolate, a multi-criteria decision analyses (MCDA) was performed by including the key chemical and physical parameters of biodiesel calculated from FAME profiles. The isolate A.sphaerica MBDU 105 is the most promising biodiesel feed stock based on decision vector through Preference Ranking Organisation Method for Enrichment Evaluation (PROMETHEE) and Graphical Analysis for Interactive Assistance (GAIA) analysis.

Bioprospecting the thermal waters of the Roman baths: isolation of oleaginous species and analysis of the FAME profile for biodiesel production

The extensive diversity of microalgae provides an opportunity to undertake bioprospecting for species possessing features suited to commercial scale cultivation. The outdoor cultivation of microalgae is subject to extreme temperature fluctuations; temperature tolerant microalgae would help mitigate this problem. The waters of the Roman Baths, which have a temperature range between 39°C and 46°C, were sampled for microalgae. A total of 3 green algae, 1 diatom and 4 cyanobacterial species were successfully isolated into ‘unialgal’ culture. Four isolates were filamentous, which could prove advantageous for low energy dewatering of cultures using filtration.

Lipid content, profiles and growth rates of the isolates were examined at temperatures of 20, 30, 40°C, with and without nitrogen starvation and compared against the oil producing green algal species, Chlorella emersonii. Some isolates synthesized high levels of lipids, however, all were most productive at temperatures lower than those of the Roman Baths. The eukaryotic algae accumulated a range of saturated and polyunsaturated FAMEs and all isolates generally showed higher lipid accumulation under nitrogen deficient conditions (Klebsormidium sp. increasing from 1.9% to 16.0% and Hantzschia sp. from 31.9 to 40.5%). The cyanobacteria typically accumulated a narrower range of FAMEs that were mostly saturated, but were capable of accumulating a larger quantity of lipid as a proportion of dry weight (M. laminosus, 37.8% fully saturated FAMEs). The maximum productivity of all the isolates was not determined in the current work and will require further effort to optimise key variables such as light intensity and media composition.

Production of biofuels from pretreated microalgae biomass by anaerobic fermentation with immobilized Clostridium acetobutylicum cells

The purpose of this work was to study the possible use of pretreated biomass of various microalgae and cyanobacteria as substrates for acetone-butanol-ethanol (ABE) fermentation by Clostridium acetobutylicum cells immobilized into poly(vinyl alcohol) cryogel. To this end, the biochemical composition of photosynthetic microorganisms cultivated under various conditions was studied. The most efficient technique for pretreating microalgal biomass for its subsequent conversion into biofuels appeared to be thermal decomposition at 108 °C. For the first time the maximum productivity of the ABE fermentation in terms of hydrogen (8.5 mmol/L medium/day) was obtained using pretreated biomass of Nannochloropsis sp. Maximum yields of butanol and ethanol were observed with Arthrospira platensis biomass used as the substrate. Immobilized Clostridium cells were demonstrated to be suitable for multiple reuses (for a minimum of five cycles) in ABE fermentation for producing biofuels from pretreated microalgal biomass.