Food Proteins: Technological, Nutritional, and Sustainability Attributes of Traditional and Emerging Proteins

Preparation of oil-in-water emulsions stabilized by faba bean protein-grape leaf polyphenol conjugates: pH-, salt-, heat-, and freeze-thaw-stability

BACKGROUND

Plant proteins are being increasingly utilized as functional ingredients in foods because of their potential health, sustainability, and environmental benefits. However, their functionality is often worse than the synthetic or animal-derived ingredients they are meant to replace. The functional performance of plant proteins can be improved by conjugating them with polyphenols. In this study, the formation and stability of oil-in-water emulsions prepared using faba bean protein-grape leaf polyphenol (FP-GLP) conjugates as emulsifiers. Initially, FP-GLP conjugates were formed using an ultrasound-assisted alkali treatment. Then, corn oil-in-water emulsions were prepared using high-intensity sonication (60% amplitude, 10 min) and the impacts of conjugate concentration, pH, ionic strength, freezing-thawing, and heating on their physicochemical properties and stability were determined.

RESULTS

Microscopy and light scattering analysis showed that oil-in-water emulsions containing small oil droplets could be formed at conjugate concentrations of 2% and higher. The addition of salt reduced the electrostatic repulsion between the droplets, which increased their susceptibility to aggregation. Indeed, appreciable droplet aggregation was observed at ≥ 50 mmol/L sodium chloride. The freeze-thaw stability of emulsions prepared with protein-polyphenol conjugates was better than those prepared using the proteins alone. In addition, the emulsions stabilized by the conjugates had a higher viscosity than those prepared by proteins alone.

CONCLUSION

This study showed that FP-GLP conjugates are effective plant-based emulsifiers for forming and stabilizing oil-in-water emulsions. Indeed, emulsions formed using these conjugates showed improved resistance to pH changes, heating, freezing, and salt addition. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Molecular regulation of rapeseed protein for improving its techno-functional properties

To improve the techno-functional properties of rapeseed protein (RP), this work tried to regulate the molecular structure of RP via inducing the co-assembly of RP with zein and whey protein (WP). The results showed that WP and zein mainly regulate the folding process of RP through hydrophobic and disulfide bonds, thereby altering the structural conformation and forming stable complex RP (CRP). WP addition not only increased the number of surface charges and hydrophilicity of proteins, but also decreased their sizes, improved the water solubility, as well as the availability of active groups. These changes significantly increased the foaming capacity (from 60 % to 147 %) and in vitro gastric digestion rate (from 10 % to 60 %) of CRP. Besides, WP also contributed to the formation of gels and the regulation of their textural profiles. Comparatively, zein improved the hydrophobicity of CRP and balanced degree of intermolecular forces, which effectively increased the emulsifying activity index of CRP from 22 m2/g to 90 m2/g. Zein decreased the hardness, springiness and water-holding capacity of gel, but increased its gumminess and chewiness. Overall, both WP and zein effectively changed the structural conformation of RP, and improved its techno-functional properties, which provides an effective strategy to modify protein.

Knowledge Maps and Emerging Trends in Cell-Cultured Meat since the 21st Century Research: Based on Different National Perspectives of Spatial-Temporal Analysis

Cell-cultured meat holds significant environmental value as an alternative protein source. Throughout the 21st century, cell-cultured meat has progressively penetrated commercial markets. However, a systematic review encompassing the entire field needs improvement. Employing Citespace, Vosviewer, and R-Bibliometrix software, a bibliometric analysis was used to present the research progress and general development trends of 484 articles on cell-cultured meat from 2000 to 2022 based on countries, authors, institutions, and keywords. This analysis provides ideas for the future development of cell-cultured meat in different countries or regions worldwide. Research on cell-cultured meat from 2000 to 2022 has undergone two phases: fluctuating growth (2000-2013) and rapid growth (2013-2022). Noteworthy contributions to cell-cultured meat studies emerge from author groups in the United States of America, the United Kingdom, and China, with influential institutions like the University of Bath significantly impacting pertinent research. Furthermore, over the past two decades, research has leaned towards exploring topics such as "biomaterials", "cultured", "land use", "public opinion", "animal welfare", and "food safety". Furthermore, this study reveals differences in nomenclature between regions and institutions. "Cultured meat" is more popular in some countries than in other forms. Institutions in Asia use "cultured meat" more frequently; however, institutions in the Americas adopt "cultivated meat" and rarely adopt "in vitro meat", and institutions in the European region have no particularly prominent tendency towards a specific nomenclature. Future research should emphasize aligning the labeling of cell-cultured meat with effective management strategies and referencing regulatory policies across various countries. For the first time, we use three different bibliometric methods to analyze temporal and spatial variation in research on cellular meat. The results of this study have a multiplier effect. We provide a theoretical basis and a practical reference for the identification of alternatives in the dual context of "food crisis and food security" and "climate crisis". At the same time, we also provide a reference for the sustainable development of the food system.

Protein transition: focus on protein quality in sustainable alternative sources

The current consumption trends, combined with the expected demographic growth in the coming years, call for a protein transition, i.e., the partial substitution of animal protein-rich foods with foods rich in proteins produced in a more sustainable way. Here, we have discussed some of the most common and promising protein sources alternative to animal proteins, namely: legumes, insects, and microorganisms (including microalgae and fungi). The primary objective was to assess their nutritional quality through the collection of digestible indispensable amino acid score (DIAAS) values available in the scientific literature. Protein digestibility corrected amino acid score (PDCAAS) values have been used where DIAAS values were not available. The ecological impact of each protein source, its nutritional quality and the potential applications in traditional foods or novel food concepts like meat analogues are also discussed. The data collected show that DIAAS values for animal proteins are higher than all the other protein sources. Soybean proteins, mycoproteins and proteins of some insects present relatively high DIAAS (or PDCAAS) values and must be considered proteins of good quality. This review also highlights the lack of DIAAS values for many potentially promising protein sources and the variability induced by the way the proteins are processed.

Discovery and mechanistic analysis of a novel source protein glutaminase PG5 and its potential application

In this study, we successfully obtained a novel source protein glutaminase PG5 with specific activity of 10.4 U/mg, good tolerance and broad substrate profile through big data retrieval. Structural analysis and site-directed mutagenesis revealed that the catalytic pocket of Mature-PG5 contained a large number of aromatic amino acids and hydrophobic amino acids, and that Ser72 greatly affects the properties of the catalytic pocket and the affinity of PG5 for the substrate. In addition, molecular dynamics analysis revealed that the opening and closing between amino acid residues Gly65 and Thr66 with Cys164 at the catalytic cleft could affect substrate binding and product release. In addition, PG5 effectively improved the solubility of fish myofibrillar proteins under low-salt conditions while enhancing their foaming and emulsification properties. This study offers valuable insights into the catalytic mechanism of PG5, which will contribute to its future directed evolution and application in the food industry.

Innovative method for producing plant-based meat analogs: Acid/calcium-induced internal gelation of potato protein/alginate composites

When creating plant-based meat analogs, it is often challenging to mimic the structural and textural attributes of real meat products during the cooking process. In this study, we investigated the potential of using potato protein/calcium alginate composite gels to formulate plant-based meat analogs. These gels provide a semi-solid texture at ambient temperature that remains intact during cooking because the electrostatic crosslinks are resistant to heat. Composite gels consisting of potato protein (10 wt%) and alginate (0-2 wt%) were prepared using the internal gelation method. This method involves dispersing an insoluble form of calcium (CaHPO4) throughout the protein-polysaccharide matrix and then using glucono-delta-lactone (GDL) to slowly lower the pH, thereby releasing the Ca2+ ions evenly throughout the system. The calcium alginate increased the strength of the potato protein gels and provided structural resistance to heat. Appreciable water loss occurred during cooking for simple calcium alginate gels, but this was prevented when potato proteins were present. Increasing the alginate concentration from 0 to 1.5 % increased the strength of the composite gels but higher levels promoted phase separation and network disruption, which reduced the gel strength. Heating did not appreciably alter the microstructure of the composite gels, but it did alter that of the pure potato protein gels. Finally, the potential of the composite gels as plant-based meat analogs was assessed by comparing their thermal denaturation and textural properties to those of real chicken breast. The potato protein/alginate composites were shown to simulate the thermal denaturation and textural changes of real chicken during the cooking process. Overall, our results suggest that calcium alginate gels may be useful in the formulation of plant-based meat products with improved cooking properties.

3D printing: trends and approaches toward achieving long-term sustainability in the food industry

Global food security has recently been under serious threat from the rapid rise in the world's population, the problems brought on by climate change, and the appearance of new pandemics. As a result, the need for novel and innovative solutions to solve the existing problems and improve food sustainability has become crucial. 3D printing is expected to play a significant role in providing tangible contributions to the food industry in achieving sustainable development goals. The 3D food printing holds the potential to produce highly customized food in terms of shape, texture, flavor, structure and nutritional value and enable us to create new unique formulations and edible alternatives. The problem of whether the cost of the printed meal and 3D printing itself can be sustainably produced is becoming more and more important due to global concerns. This review intends to provide a comprehensive overview of 3D printed foods with an overview of the current printing methodologies, illustrating the technology's influencing factors, and its applications in personalized nutrition, packaging, value addition, and valorization aspects to fully integrate sustainability concerns thus exploring the potential of 3D food printing.

Moisture loss inhibition with biopolymer films for preservation of fruits and vegetables: A review

In cold storage, fruits and vegetables still keep a low respiratory rate. Although cold storage is beneficial to maintain the quality of some fruits and vegetables, several factors (temperature and humidity fluctuations, heat inflow, air velocity, light, etc.) will accelerate moisture loss. Biopolymer films have attracted great attention for fruits and vegetables preservation because of their biodegradable and barrier properties. However, there is still a certain amount of water transfer occurring between storage environment/biopolymer films/fruits and vegetables (EFF). The effect of biopolymer films to inhibit moisture loss of fruits and vegetables and the water transfer mechanism in EFF system need to be studied systematically. Therefore, the moisture loss of fruits and vegetables, crucial properties, major components, fabrication methods, and formation mechanisms of biopolymer films were reviewed. Further, this study highlights the EFF system, responses of fruits and vegetables, and water transfer in EFF. This work aims to clarify the characteristics of EFF members, their influence on each other, and water transfer, which is conducive to improving the preservation efficiency of fruits and vegetables purposefully in future studies. In addition, the prospects of studies in EFF systems are shown.

Tilapia-soybean protein co-precipitates: Focus on physicochemical properties, nutritional quality, and proteomics profile

The development of binary protein systems featuring superior nutritional properties and applied range is an interesting and challenging task in the food industry. In this study, the tilapia-soybean protein co-precipitates (TSPCs) with different mass ratios of tilapia meat and soybean meal were constructed. Results of physicochemical properties showed that the highest solubility and thermal stability values of TSPCs were 81.90 % and 90.30 °C, respectively. TSPCs have the full complement of amino acids and enhanced nutritional quality compared to tilapia protein isolate (TPI) and soybean protein isolate (SPI). TSPC2:1 and TSPC1:1 contained the highest levels of tryptophan, aspartic acid, glycine, histidine, and arginine relative to TPI and SPI. The in vitro protein digestibility and protein digestibility corrected amino acid scores of TSPCs were also higher than that of SPI. SDS-PAGE revealed that TSPCs contained protein subunits from TPI and SPI. Moreover, the lysine-to-arginine ratio and β subunit were greatly correlated with protein digestibility with correlation coefficients of -0.962 (P < 0.01) and -0.971 (P < 0.01), respectively. Compared to SPI, TSPCs displayed a lower lysine-to-arginine ratio and β-conglycinin content, which improved its digestibility. Proteomic analysis indicated that TSPC1:1 had 989 unique proteins, which gives TSPCs enhanced biological properties compared to TPI and SPI, allowing them to participate in a broad range of biochemical metabolic and signal transduction pathways. The study would advance the utilization of mixed proteins toward exceptional food industry applications.

Dairy, Plant, and Novel Proteins: Scientific and Technological Aspects

Alternative proteins have gained popularity as consumers look for foods that are healthy, nutritious, and sustainable. Plant proteins, precision fermentation-derived proteins, cell-cultured proteins, algal proteins, and mycoproteins are the major types of alternative proteins that have emerged in recent years. This review addresses the major alternative-protein categories and reviews their definitions, current market statuses, production methods, and regulations in different countries, safety assessments, nutrition statuses, functionalities and applications, and, finally, sensory properties and consumer perception. Knowledge relative to traditional dairy proteins is also addressed. Opportunities and challenges associated with these proteins are also discussed. Future research directions are proposed to better understand these technologies and to develop consumer-acceptable final products.

Electrical Fields in the Processing of Protein-Based Foods

Electric field-based technologies offer interesting perspectives which include controlled heat dissipation (via the ohmic heating effect) and the influence of electrical variables (e.g., electroporation). These factors collectively provide an opportunity to modify the functional and technological properties of numerous food proteins, including ones from emergent plant- and microbial-based sources. Currently, numerous scientific studies are underway, contributing to the emerging body of knowledge about the effects on protein properties. In this review, "Electric Field Processing" acknowledges the broader range of technologies that fall under the umbrella of using the direct passage of electrical current in food material, giving particular focus to the ones that are industrially implemented. The structural and biological effects of electric field processing (thermal and non-thermal) on protein fractions from various sources will be addressed. For a more comprehensive contextualization of the significance of these effects, both conventional and alternative protein sources, along with their respective ingredients, will be introduced initially.

Evaluation of Protein Adequacy From Plant-Based Dietary Scenarios in Simulation Studies: A Narrative Review

Although a diet high in plant foods can provide beneficial nutritional outcomes, unbalanced and restrictive plant-based diets may cause nutrient deficiencies. Protein intake from these diets is widely discussed, but the comparison of animal and plant proteins often disregards amino acid composition and digestibility as measurements of protein quality. Poor provision of high-quality protein may result in adverse outcomes, especially for individuals with increased nutrient requirements. Several dietary modeling studies have examined protein adequacy when animal-sourced proteins are replaced with traditional and novel plant proteins, but no review consolidating these findings are available. This narrative review aimed to summarize the approaches of modeling studies for protein intake and protein quality when animal-sourced proteins are replaced with plant foods in diet simulations and examine how these factors vary across age groups. A total of 23 studies using dietary models to predict protein contribution from plant proteins were consolidated and categorized into the following themes-protein intake, protein quality, novel plant-based alternatives, and plant-based diets in special populations. Protein intake from plant-based diet simulations was lower than from diets with animal-sourced foods but met country-specific nutrient requirements. However, protein adequacy from some plant-sourced foods were not met for simulated diets of children and older adults. Reduced amino acid adequacy was observed with increasing intake of plant foods in some scenarios. Protein adequacy was generally dependent on the choice of substitution with legumes, nuts, and seeds providing greater protein intake and quality than cereals. Complete replacement of animal to plant-sourced foods reduced protein adequacy when compared with baseline diets and partial replacements.

Ultrasensitive detection of glucose oxidase and alkaline phosphatase in milk based on valence regulated upconversion nanoprobes

Fresh milk should undergo sterilization before consumption to eliminate bacteria that can cause foodborne illnesses. Additional antimicrobial measures are beneficial to extend its shelf life. The nanoprobe developed herein can not only inspect the activity of alkaline phosphatase (ALP) for evaluating the degree of pasteurization, but also detect the activity of glucose oxidase (GOD), which is added as a chemical preservative. The facile preparation of the nanoprobe involved introducing gallic acid-Fe complex (GA-Fe) into lanthanide doped upconversion nanomaterials (UCNPs). Based on the alteration of iron's valence state in the complex through a straightforward redox reaction, both enzyme activities could be determined through colorimetric and luminometric dual-signal readouts. With detection limits of 1.669 × 10-5 for GOD and 9.81 × 10-6 U/mL for ALP respectively, this nanoprobe shows merits of easy operation and high sensitivity. Successful application in milk samples demonstrates its potential as an innovative and cost-effective approach to food safety inspection.

The Influence of Whey Protein Isolate on the Quality Indicators of Acidophilic Ice Cream Based on Liquid Concentrates of Demineralized Whey

The use of liquid whey concentrates in the composition of ice cream, especially in combination with other powdered whey proteins, is limited due to their understudied properties. This article shows the main rheological and thermophysical characteristics of ice cream mixes, as well as color parameters, microstructure, analysis of ice crystals and quality indicators of ice cream during storage. The most significant freezing of free water (p ≤ 0.05) was observed in the temperature range from the cryoscopic temperature to -10 °C. The microscopy of experimental ice cream samples based on hydrolyzed whey concentrates indicates the formation of a homogeneous crystalline structure of ice crystals with an average diameter of 13.75-14.75 μm. Microstructural analysis confirms the expediency of using whey protein isolate in ice cream, which ensures uniform distribution of air bubbles in the product and sufficient overrun (71.98-76.55%). The combination of non-hydrolyzed whey concentrate and 3% whey protein isolate provides the highest stability to preserve the purity and color intensity of the ice cream during storage. The produced ice cream can be classified as probiotic (number of Lactobacillus acidophilus not lower than 6.2 log CFU/g) and protein-enriched (protein supply from 15.02-18.59%).

Carrageenan impact on digestive proteolysis of meat proteins in meatballs or soluble hydrolyzed collagen

In a health-conscious age, vivid discussion has been made on the healthfulness of processed foods and food additives. This study focuses on carrageenan (CGN), an approved but debated family of sulphated galactans from algae used as gelling, thickening and stabilizing agents but with indications of possible adverse effects, including as an inhibitor of digestive proteolysis. To challenge this inhibitory hypothesis, food-grade kappa-, iota and lambda-CGN preparations were used to produce beef meatballs whose proteolysis was studied using an in vitro digestion model coupled to various proteomic analyses. Results show that CGN anti-nutritional effects are abolished in beef meatballs. Specifically, proteomic analysis of gastric digesta of myosin light chain 1 (MYL1), alpha skeletal muscle (ACTA1), glyceraldehyde-3-phosphate dehydrogenase (GAPDH) and fructose-bisphosphate aldolase (ALDOA) reveal no appreciable differences in the profiles of bioaccessible peptides. Separate digestions of a soluble collagen hydrolysate show CGN does inhibit proteolysis of soluble collagen, therefore supporting the notion that the meat matrix confers a shielding effect that eliminates CGN ability to interfere with digestive proteolysis. Thus, this work shows that CGN ability to hinder digestive proteolysis may not apply to all foods and contributes evidence important to the discussions on CGN uses, indications and regulatory status.

Well-designed protein amyloid nanofibrils composites as versatile and sustainable materials for aquatic environment remediation: A review

Amyloid nanofibrils (ANFs) are supramolecular polymers originally classified as pathological markers in various human degenerative diseases. However, in recent years, ANFs have garnered greater interest and are regarded as nature-based sustainable biomaterials in environmental science, material engineering, and nanotechnology. On a laboratory scale, ANFs can be produced from food proteins via protein unfolding, misfolding, and hydrolysis. Furthermore, ANFs have specific structural characteristics such as a high aspect ratio, good rigidity, chemical stability, and a controllable sequence. These properties make them a promising functional material in water decontamination research. As a result, the fabrication and application of ANFs and their composites in water purification have recently gained considerable attention. Despite the large amount of literature in this field, there is a lack of systematic review to assess the gap in using ANFs and their composites to remove contaminants from water. This review discusses significant advancements in design techniques as well as the physicochemical properties of ANFs-based composites. We also emphasize the current progress in using ANFs-based composites to remove inorganic, organic, and biological contaminants. The interaction mechanisms between ANFs-based composites and contaminants are also highlighted. Finally, we illustrate the challenges and opportunities associated with the future preparation and application of ANFs-based composites. We anticipate that this review will shed new light on the future design and use of ANFs-based composites.

Protein separation by sequential selective complex coacervation

In food manufacturing and particular biomedical products selected proteins are often required. Obtaining the desired proteins in a pure form from natural resources is therefore important, but often very challenging. Herein, we design a sequential coacervation process that allows to efficiently isolate and purify proteins with different isoelectric points (pIs) from a mixed solution, namely Bovine Serum Albumin (BSA, pI = 4.9) and Peroxidase from Horseradish (HRP, pI = 7.2). The key to separation is introducing a suitable polyelectrolyte that causes selective complex coacervation at appropriate pH and ionic strength. Specifically, polyethyleneimine (PEI), when added into the mixture at pH 6.0, produces a coacervation which exclusively contains BSA, leading to a supernatant solution containing 100 % HRP with a purity of 91 %. After separating the dilute and dense phases, BSA is recovered by adding poly(acrylic acid) (PAA) to the concentrated phase, which displaces BSA from the complex because it interacts more strongly with PEI. The supernatant phase after this step contains approximately 75 % of the initial amount of BSA with a purity of 99 %. Our results confirm that coacervation under well-defined conditions can be selective, enabling separation of proteins with adequate purity. Therefore, the established approach demonstrates a facile and sustainable strategy with potential for protein separation at industrial scale.

Microbiological transglutaminase: Biotechnological application in the food industry

Microbial transglutaminases (mTGs) belong to the family of global TGs, isolated and characterised by various bacterial strains, with the first being Streptomyces mobaraensis. This literature review also discusses TGs of animal and plant origin. TGs catalyse the formation of an isopeptide bond, cross-linking the amino and acyl groups. Due to its broad enzymatic activity, TG is extensively utilised in the food industry. The annual net growth in the utilisation of enzymes in the food processing industry is estimated to be 21.9%. As of 2020, the global food enzymes market was valued at around $2.3 billion USD (mTG market was estimated to be around $200 million USD). Much of this growth is attributed to the applications of mTG, benefiting both producers and consumers. In the food industry, TG enhances gelation and modifies emulsification, foaming, viscosity, and water-holding capacity. Research on TG, mainly mTG, provides increasing insights into the wide range of applications of this enzyme in various industrial sectors and promotes enzymatic processing. This work presents the characteristics of TGs, their properties, and the rationale for their utilisation. The review aims to provide theoretical foundations that will assist researchers worldwide in building a methodological framework and furthering the advancement of biotechnology research.

Structure and physical stability of plant-based food gel systems: Impact of protein (mung bean, pea, potato, soybean) and fat (coconut, sunflower)

Despite their popularity, plant-based food gel systems (GS) sometimes have suboptimal texture compared to animal-based products. Therefore, 4 commercial plant proteins (from mung bean, pea, potato and soybean) and 2 commercial plant fats (sunflower oil and coconut fat) in 2 contents (7.5 wt% and 17.5 wt%) were evaluated towards their contribution to structure and physical stability a lean (LGS, no fat) and an emulsified GS (EGS). Generally, protein source had a larger effect on structure and physical stability than fat source and content. Unheated, GS with soybean protein showed most structure and highest physical stability. Heated till 94 °C, the structure of GS increased drastically, but EGS showed less structure than LGS, attributed to low solid fat contents (SFC), hence low rigidity, of the incorporated oil droplets at 94 °C. Cooled till 5 °C all GS showed an additional increase in structure, for GS with mung bean and pea protein accompanied with an increase in physical stability. Overall, EGS with sunflower oil showed less structure and lower stability than EGS with coconut fat, likely due to their different SFC. At 5 °C, Peak force of GS with potato protein was highest. Across protein sources, EGS displayed a higher Peak force with coconut fat than with sunflower oil, again likely due to different SFC, hence, rigidity of the oil droplets. Physical stability of GS did not vary significantly between protein sources, fat sources nor fat contents, after a freeze-thaw cycle, nor during prolonged cold storage.

Ultraprocessed plant-based foods: Designing the next generation of healthy and sustainable alternatives to animal-based foods

Numerous examples of next-generation plant-based foods, such as meat, seafood, egg, and dairy analogs, are commercially available. These products are usually designed to have physicochemical properties, sensory attributes, and functional behaviors that match those of the animal-sourced products they are designed to replace. However, there has been concern about the potential negative impacts of these foods on human nutrition and health. In particular, many of these products have been criticized for being ultraprocessed foods that contain numerous ingredients and are manufactured using harsh processing operations. In this article, the concept of ultraprocessed foods is introduced and its relevance to describe the properties of next-generation plant-based foods is discussed. Most commercial plant-based meat, seafood, egg, and dairy analogs currently available do fall into this category, and so can be classified as ultraprocessed plant-based (UPB) foods. The nutrient content, digestibility, bioavailability, and gut microbiome effects of UPB foods are compared to those of animal-based foods, and the potential consequences of any differences on human health are discussed. Some commercial UPB foods would not be considered healthy based on their nutrient profiles, especially those plant-based cheeses that contain low levels of protein and high levels of fat, starch, and salt. However, it is argued that UPB foods can be designed to have good nutritional profiles and beneficial health effects. Finally, areas where further research are still needed to create a more healthy and sustainable food supply are discussed.

An In Vitro Comparison of the Digestibility and Gastrointestinal Fate of Scallops and Plant-Based Scallop Analogs

Concerns exist regarding the negative environmental impact and health risks associated with ocean fishing and aquaculture, such as stock depletion, pollution, biodiversity loss, and toxin presence. To address these concerns, plant-based seafood analogs are being developed. Our previous study successfully created plant-based scallop analogs using pea proteins and citrus pectin, resembling real scallops in appearance and texture. This study focuses on comparing the digestive fate of these analogs to real scallops, as it can impact their nutritional properties. Using an in vitro digestion model (INFOGEST), we simulated oral, gastric, and small intestinal conditions. The analysis revealed differences in the microstructure, physicochemical properties, and protein digestibility between the plant-based scallops and real scallops. The particle size and charge followed the following similar trends for both types of scallops: the particle size decreased from the mouth to the stomach to the small intestine; the particles were negative in the mouth, positive in the stomach, and negative in the small intestine. The protein digestibility of the plant-based scallops was considerably lower than that of real scallops. For instance, around 18.8% and 61.4% of protein was digested in the stomach and small intestine phases for the real scallop (80.2% total digestion), whereas around 8.7% and 47.7% of the protein was digested for the plant-based scallop (56.4% total digestion). The lower digestibility of the plant-based scallops may have been due to differences in the protein structure, the presence of dietary fibers (pectin), or antinutritional factors in the plant proteins. These findings are crucial for developing more sustainable next-generation plant-based seafood analogs.

Diverse uses of valuable seafood processing industry waste for sustainability: a review

Seafoods are rich in untapped bioactive compounds that have the potential to provide novel ingredients for the development of commercial functional foods and pharmaceuticals. Unfortunately, a large portion of waste or discards is generated in commercial processing setups (50-80%), which is wasted or underutilized. These by-products are a rich source of novel and valuable biomolecules, including bioactive peptides, collagen and gelatin, oligosaccharides, fatty acids, enzymes, calcium, water-soluble minerals, vitamins, carotenoids, chitin, chitosan and biopolymers. These fish components may be used in the food, cosmetic, pharmaceutical, environmental, biomedical and other industries. Furthermore, they provide a viable source for the production of biofuels. As a result, the current review emphasizes the importance of effective by-product and discard reduction techniques that can provide practical and profitable solutions. Recognizing this, many initiatives have been initiated to effectively use them and generate income for the long-term sustainability of the environment and economic framework of the processing industry. This comprehensive review summarizes the current state of the art in the sustainable valorisation of seafood by-products for human consumption. The review can generate a better understanding of the techniques for seafood waste valorisation to accelerate the sector while providing significant benefits.

Searching for protein variants with desired properties using deep generative models

BACKGROUND

Protein engineering aims to improve the functional properties of existing proteins to meet people's needs. Current deep learning-based models have captured evolutionary, functional, and biochemical features contained in amino acid sequences. However, the existing generative models need to be improved when capturing the relationship between amino acid sites on longer sequences. At the same time, the distribution of protein sequences in the homologous family has a specific positional relationship in the latent space. We want to use this relationship to search for new variants directly from the vicinity of better-performing varieties.

RESULTS

To improve the representation learning ability of the model for longer sequences and the similarity between the generated sequences and the original sequences, we propose a temporal variational autoencoder (T-VAE) model. T-VAE consists of an encoder and a decoder. The encoder expands the receptive field of neurons in the network structure by dilated causal convolution, thereby improving the encoding representation ability of longer sequences. The decoder decodes the sampled data into variants closely resembling the original sequence.

CONCLUSION

Compared to other models, the person correlation coefficient between the predicted values of protein fitness obtained by T-VAE and the truth values was higher, and the mean absolute deviation was lower. In addition, the T-VAE model has a better representation learning ability for longer sequences when comparing the encoding of protein sequences of different lengths. These results show that our model has more advantages in representation learning for longer sequences. To verify the model's generative effect, we also calculate the sequence identity between the generated data and the input data. The sequence identity obtained by T-VAE improved by 12.9% compared to the baseline model.

Protein-Stabilized Emulsion Gels with Improved Emulsifying and Gelling Properties for the Delivery of Bioactive Ingredients: A Review

In today's food industry, the potential of bioactive compounds in preventing many chronic diseases has garnered significant attention. Many delivery systems have been developed to encapsulate these unstable bioactive compounds. Emulsion gels, as colloidal soft-solid materials, with their unique three-dimensional network structure and strong mechanical properties, are believed to provide excellent protection for bioactive substances. In the context of constructing carriers for bioactive materials, proteins are frequently employed as emulsifiers or gelling agents in emulsions or protein gels. However, in emulsion gels, when protein is used as an emulsifier to stabilize the oil/water interface, the gelling properties of proteins can also have a great influence on the functionality of the emulsion gels. Therefore, this paper aims to focus on the role of proteins' emulsifying and gelling properties in emulsion gels, providing a comprehensive review of the formation and modification of protein-based emulsion gels to build high-quality emulsion gel systems, thereby improving the stability and bioavailability of embedded bioactive substances.

Combination of Milk and Plant Proteins to Develop Novel Food Systems: What Are the Limits?

In the context of a diet transition from animal protein to plant protein, both for sustainable and healthy scopes, innovative plant-based foods are being developing. A combination with milk proteins has been proposed as a strategy to overcome the scarce functional and sensorial properties of plant proteins. Based on this mixture were designed several colloidal systems such as suspensions, gels, emulsions, and foams which can be found in many food products. This review aims to give profound scientific insights on the challenges and opportunities of developing such binary systems which could soon open a new market category in the food industry. The recent trends in the formulation of each colloidal system, as well as their limits and advantages are here considered. Lastly, new approaches to improve the coexistence of both milk and plant proteins and how they affect the sensorial profile of food products are discussed.

Trends and prospects in dairy protein replacement in yogurt and cheese

There is a growing demand for nutritional, functional, and eco-friendly dairy products, which has increased the need for research regarding alternative and sustainable protein sources. Plant-based, single-cell (SCP), and recombinant proteins are being explored as alternatives to dairy proteins. Plant-Based Proteins (PBPs) are commonly used to replace total dairy protein. However, PBPs are generally mixed with dairy proteins to improve their functional properties, which makes them dependent on animal protein sources. In contrast, single-Cell Proteins (SCPs) and recombinant dairy proteins are promising alternatives for dairy protein replacement since they provide nutritional components, essential amino acids, and high protein yield and can use industrial and agricultural waste as carbon sources. Although alternative protein sources offer numerous advantages over conventional dairy proteins, several technical and sensory challenges must be addressed to fully incorporate them into cheese and yogurt products. Future research can focus on improving the functional and sensory properties of alternative protein sources and developing new processing technologies to optimize their use in dairy products. This review highlights the current status of alternative dairy proteins in cheese and yogurt, their functional properties, and the challenges of their use in these products.

Believe It or 'Nut': Why It Is Time to Set the Record Straight on Nut Protein Quality: Pistachio (Pistacia vera L.) Focus

There are growing public health movements to transition towards diets that are plant-based. However, confusion exists with concerns that plant-based proteins (including nuts) may be inferior with respect to protein quality. The present publication evaluates the evolution of protein quality concepts and explains the protein science related to pistachios. Pistachio nuts are a plant-based complete protein providing all nine EAAs in addition to an array of nutrients and phytochemicals. They have a PDCAAS of 73 and 81%, (raw and roasted pistachios, respectively), higher than that of many other tree nuts. From an environmental perspective transitioning towards plant-based diets (including nuts) could have potential to reduce total/green water footprints. Dietary guidelines are evolving yet nuts such as pistachios do not always have a clear place within these. Now appears to be a pertinent time to look at protein quality from the perspective of whole daily diets and dietary patterns, factoring in both health and environmental outcomes. Given updated modes of thinking, nuts such as pistachios have an important role to play in terms of providing ready-to-eat, good-quality, plant-based protein within daily diets.

Associating Compositional, Nutritional and Techno-Functional Characteristics of Faba Bean (Vicia faba L.) Protein Isolates and Their Production Side-Streams with Potential Food Applications

Faba beans (Vicia faba L.) show exciting prospects as a sustainable source of protein and fibre, with the potential to transition to a more sustainable food production. This study reveals the compositional, nutritional and techno-functional characteristics of two protein isolates from faba beans (Vicia faba L.), a high-starch fraction and a high-fibre side-stream. During the analysis of those four ingredients, particular attention was paid to the isolates' protein profile and the side-streams' carbohydrate composition. The isoelectric precipitated protein isolate 1 showed a protein content of 72.64 ± 0.31% DM. It exhibited low solubility but superior digestibility and high foam stability. High foaming capacity and low protein digestibility were observed for protein isolate 2, with a protein content of 71.37 ± 0.93% DM. This fraction was highly soluble and consisted primarily of low molecular weight proteins. The high-starch fraction contained 83.87 ± 3.07% DM starch, of which about 66% was resistant starch. Over 65% of the high-fibre fraction was insoluble dietary fibre. The findings of this study provide a detailed understanding of different production fractions of faba beans, which is of great value for future product development.

Trends in millet and pseudomillet proteins - Characterization, processing and food applications

Millets are small-seeded crops which have been well adopted globally owing to their high concentration of macro and micronutrients such as protein, dietary fibre, essential fatty acids, minerals and vitamins. Considering their climate resilience and potential role in nutritional and health security, the year 2023 has been declared as 'International Year of Millets' by the United Nations. Cereals being the major nutrient vehicle for a majority population, and proteins being the second most abundant nutrient in millets, these grains can be a suitable alternative for plant-based proteins. Therefore, this review was written with an aim to succinctly provide an overview of the available literature take on the characterization, processing and applications of millet-based proteins. This information would play an important role in realizing the research gap restricting the utilization of complete potential of millet proteins. This can be further used by researchers and food industries for understanding the scope of millet proteins as an ingredient for novel food product development.

Design of a Plant-Based Yogurt-Like Product Fortified with Hemp Flour: Formulation and Characterization

Plant-based milk alternatives have gained massive popularity among consumers because of their sustainable production compared to bovine milk and because of meeting the nutritional requests of consumers affected by cow milk allergies and lactose intolerance. In this work, hemp flour, in a blend with rice flour, was used to design a novel lactose- and gluten-free yogurt-like (YL) product with suitable nutritional, functional, and sensory features. The growth and the acidification of three different lactic acid bacteria strains were monitored to better set up the biotechnological protocol for making the YL product. Hemp flour conferred the high fiber (circa 2.6 g/100 g), protein (circa 4 g/100 g), and mineral contents of the YL product, while fermentation by selected lactic acid bacteria increased the antioxidant properties (+8%) and the soluble fiber (+0.3 g/100 g), decreasing the predicted glycemic index (-10%). As demonstrated by the sensory analysis, the biotechnological process decreased the earthy flavor (typical of raw hemp flour) and increased the acidic and creamy sensory perceptions. Supplementation with natural clean-label vanilla powder and agave syrup was proposed to further decrease the astringent and bitter flavors. The evaluation of the starter survival and biochemical properties of the product under refrigerated conditions suggests an estimated shelf-life of 30 days. This work demonstrated that hemp flour might be used as a nutritional improver, while fermentation with a selected starter represents a sustainable and effective option for exploiting its potential.

Technological interventions in improving the functionality of proteins during processing of meat analogs

Meat analogs have opened a new horizon of opportunities for developing a sustainable alternative for meat and meat products. Proteins are an integral part of meat analogs and their functionalities have been extensively studied to mimic meat-like appearance and texture. Proteins have a vital role in imparting texture, nutritive value, and organoleptic attributes to meat analogs. Processing of suitable proteins from vegetable, mycoproteins, algal, and single-cell protein sources remains a challenge and several technological interventions ranging from the isolation of proteins to the processing of products are required. The present paper reviews and discusses in detail various proteins (soy proteins, wheat gluten, zein, algal proteins, mycoproteins, pulses, potato, oilseeds, pseudo-cereals, and grass) and their suitability for meat analog production. The review also discusses other associated aspects such as processing interventions that can be adapted to improve the functional and textural attributes of proteins in the processing of meat analogs (extrusion, spinning, Couette shear cell, additive manufacturing/3D printing, and freeze structuring). '.

Recent advances in structural characterization of biomacromolecules in foods via small-angle X-ray scattering

Small-angle X-ray scattering (SAXS) is a method for examining the solution structure, oligomeric state, conformational changes, and flexibility of biomacromolecules at a scale ranging from a few Angstroms to hundreds of nanometers. Wide time scales ranging from real time (milliseconds) to minutes can be also covered by SAXS. With many advantages, SAXS has been extensively used, it is widely used in the structural characterization of biomacromolecules in food science and technology. However, the application of SAXS in charactering the structure of food biomacromolecules has not been reviewed so far. In the current review, the principle, theoretical calculations and modeling programs are summarized, technical advances in the experimental setups and corresponding applications of in situ capabilities: combination of chromatography, time-resolved, temperature, pressure, flow-through are elaborated. Recent applications of SAXS for monitoring structural properties of biomacromolecules in food including protein, carbohydrate and lipid are also highlighted, and limitations and prospects for developing SAXS based on facility upgraded and artificial intelligence to study the structural properties of biomacromolecules are finally discussed. Future research should focus on extending machine time, simplifying SAXS data treatment, optimizing modeling methods in order to achieve an integrated structural biology based on SAXS as a practical tool for investigating the structure-function relationship of biomacromolecules in food industry.

Protein Quality and Sensory Perception of Hamburgers Based on Quinoa, Lupin and Corn

The need for partial or total substitution of animal protein sources by vegetable sources of high protein quality with good sensory acceptance is a promising alternative. The objective was to develop a hamburger with vegetable protein using a mixture design based on quinoa (Chenopodium quinoa Willd.), Peruvian Andean corn (Zea mays) and Andean lupine (Lupinus mutabilis Sweet). The design of these mixtures allowed obtaining eleven formulations, three of which were selected for complying with the amino acid intake for adults recommended by FAO. Then, a completely randomized design was applied to the selected samples plus a commercial product. Proximal composition was measured on a dry basis (protein, fat, carbohydrates, and ash), calculation of the Protein Digestibility Corrected Amino Acid Score (PDCAAS) and a sensory analysis was carried out using the Check-All-That-Apply (CATA) method with acceptability in 132 regular consumers of vegetarian products. Protein, fat, carbohydrate, and ash contents ranged from 18.5–24.5, 4.1–7.5, 65.4–72.1 and 2.8–5.9%, respectively. The use of Andean crops favored the protein content and the contribution of sulfur amino acids (SAA) and tryptophan from quinoa and lysine and threonine from lupin. The samples with Andean crops were described as easy to cut, soft, good, healthy, legume flavor, tasty and light brown, however the commercial sample was characterized as difficult to cut, hard, dark brown, uneven color, dry and grainy. The sample with 50% quinoa and 50% lupin was the most acceptable and reached a digestibility of 0.92. It complied with the lysine, threonine, and tryptophan intake, with the exception of SAA, according to the essential amino acid pattern proposed by the Food and Agriculture Organization of the United Nations.

Recent advances on the impact of novel non-thermal technologies on structure and functionality of plant proteins: A comprehensive review

The recent trend in consumption of plant-based protein over animal protein opens up a new avenue for sustainable agriculture practice, less environmental impact and greenhouse gas emission. The modification of plant-based proteins by novel non-thermal technologies includes the structural transformation followed by the modulation of their functional properties that are exploited to develop a protein ingredient system for application in food formulation. This review explores the impact of non-thermal process technologies on structural modification of plant proteins followed by improvement in protein's function in food formulation. Novel concepts articulating the impact of non-thermal technologies on structural and functional modification of plant proteins affecting it's digestibility and bioavailability are addressed. Limitations and prospects of applying non-thermal technologies in developing an alternative plant-based protein food system are also summarized. Non-thermal processes are considered as the emerging technologies that results in conformational changes in secondary, tertiary and quaternary structure of plant proteins which helps in modification of functional properties without jeopardizing the organoleptic properties and bioactivity of the protein. However, extensive future study is needed to optimize the non-thermal process parameters along with the finding of new protein sources to achieve healthy and sustainable plant-based food system.

Food Quality, Drug Safety, and Increasing Public Health Measures in Supply Chain Management

Over the last decade, there has been an increased interest in public health measures concerning food quality and drug safety in supply chains and logistics operations. Against this backdrop, this study systematically reviewed the extant literature to identify gaps in studying food quality and drug safety, the proposed solutions to these issues, and potential future research directions. This study utilized content analysis. The objectives of the review were to (1) identify the factors affecting food quality and possible solutions to improve results, (2) analyze the factors that affect drug safety and identify ways to mitigate them through proper management; and (3) establish integrated supply chains for food and drugs by implementing modern technologies, followed by one another to ensure a multi-layered cross-verification cascade and resource management at the different phases to ensure quality, safety, and sustainability for the benefit of public health. This review investigated and identified the most recent trends and technologies used for successfully integrated supply chains that can guarantee food quality and drug safety. Using appropriate keywords, 298 articles were identified, and 205 were shortlisted for the analysis. All analysis and conclusions are based on the available literature. The outcomes of this paper identify new research directions in public health and supply chain management.

Food Structure and Nutrition Interface: New Perspectives in Designing Healthy and Sustainable Foods

The increasing world population, impact of food production on climate change, and ongoing issues with diet-related diseases (e.g., malnutrition and obesity) are global major challenges. Recent advances in how food structure impacts the extent and kinetics of uptake of nutrients and its consequent effects on the physiological outcomes are beginning to shift our understanding of nutrition. This understanding is important to designing future foods that provide optimum nutrient bioavailability and deliver healthy outcomes. We discuss perspectives and scientific challenges in understanding the complex relationship between food structure/matrix modification during the digestion process and the absorption of nutrients as well as designing food structures with more sustainable materials.

Influence of Proteins on the Absorption of Lipophilic Vitamins, Carotenoids and Curcumin - A Review

While proteins have been widely used to encapsulate, protect, and regulate the release of bioactive food compounds, little is known about the influence of co-consumed proteins on the absorption of lipophilic constituents following digestion, such as vitamins (A, D, E, K), carotenoids, and curcumin. Their bioavailability is often low and very variable, depending on the food matrix and host factors. Some proteins can act as emulsifiers during digestion. Their liberated peptides have amphiphilic properties that can facilitate the absorption of microconstituents, by improving their transition from lipid droplets into mixed micelles. Contrarily, the less well digested proteins could negatively impinge on enzymatic accessibility to the lipid droplets, slowing down their processing into mixed micelles and entrapping apolar food compounds. Interactions with mixed micelles and proteins are also plausible, as shown earlier for drugs. This review focuses on the ability of proteins to act as effective emulsifiers of lipophilic vitamins, carotenoids, and curcumin during digestion. The functional properties of proteins, their chemical interactions with enzymes and food constituents during gastro-intestinal digestion, potentials and limitations for their use as emulsifiers are emphasized and data from human, animal, and in vitro trials are summarized.

Combination of cellulose and plant oil toward sustainable bottlebrush copolymer elastomers with tunable mechanical performance

In this work, sustainable cellulose-g-poly(lauryl acrylate-co-acrylamide) [Cell-g-P(LA-co-AM)] bottlebrush copolymer elastomers derived from cellulose and plant oil were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. Differential scanning calorimeter (DSC) results indicate that these thermally stable Cell-g-P(LA-co-AM) bottlebrush copolymer elastomers show adjustable melting temperatures. Monotonic and cyclic tensile tests suggest that the mechanical properties, including tensile strength, extensibility, Young's modulus, and elasticity, can be conveniently controlled by changing the LA/AM feed ratio and cellulose content. In such kind of bottlebrush copolymer elastomers, the rigid cellulose backbones act as cross-linking points to provide tensile strength. The incorporated PAM segments can form additional network structure via hydrogen bonding, resulting in enhanced tensile strength but decreased extensibility when more PAM segments are introduced. This versatile strategy can promote the development of sustainable cellulose-based bottlebrush copolymer elastomers from renewable resources.