Modeling the interactions of particulates with epithelial lining fluid antioxidants

Oxidative potential and in vitro toxicity of particles generated by pyrotechnic smokes in human small airway epithelial cells

Pyrotechnic smokes are widely used in civilian and military applications. The major issue arise from the release of particles after smoke combustion but the health risks related to their exposure are poorly documented whereas toxicity of airborne particles on the respiratory target are very well known. Therefore, this study aimed to explore the in vitro toxicity of the particle fraction of different pyrotechnic smokes. Particles from a red signalling smoke (RSS), an hexachloroethane-based obscuring smoke (HC-OS) and an anti-intrusion smoke (AIS) were collected from the cloud. RSS particles displayed the highest organic fraction (quinones and polycyclic aromatic hydrocarbons) of the three samples characterized. AIS particles contained K and cholesterol derivatives. HC-OS particles were mainly metallic with very high concentrations of Al, Fe and Ca. Intrinsic oxidative potential of smoke particles was measured with two assays. Depletions of DTT by RSS particles was greater than depletion obtained with AIS and HC-OS particles but depletion of acid ascorbic (AA) was only observed with HC-OS particles. In vitro toxicity was assessed by exposing human small airway epithelial cells (SAEC) to various concentrations of particles. After 24 h of exposure, cell viability was not affected but significant modifications of mRNA expression of antioxidant (SOD-1 and -2, catalase, HO-1, NQO-1) and inflammatory markers (IL-6, IL-8, TNF-α) were observed and were dependent on smoke type. Particles rich in metal, such as HC-OS, induced a greatest depletion of AA and a greatest inflammatory response, whereas particles rich in organic compounds, such as RSS, induced a greatest DTT depletion and a greatest antioxidant response. In conclusion, the three smoke particles have an intrinsic oxidative potential and triggered a cell adaptive response. Our study improved the knowledge of particle toxicity of pyrotechnic smokes and scientific approach developed here could be used to study other type of particles.

Predicting Spatial Variations in Multiple Measures of PM2.5 Oxidative Potential and Magnetite Nanoparticles in Toronto and Montreal, Canada

There is growing interest to move beyond fine particle mass concentrations (PM_2.5) when evaluating the population health impacts of outdoor air pollution. However, few exposure models are currently available to support such analyses. In this study, we conducted large-scale monitoring campaigns across Montreal and Toronto, Canada during summer 2018 and winter 2019 and developed models to predict spatial variations in (1) the ability of PM_2.5 to generate reactive oxygen species in the lung fluid (ROS), (2) PM_2.5 oxidative potential based on the depletion of ascorbate (OP^AA) and glutathione (OP^GSH) in a cell-free assay, and (3) anhysteretic magnetic remanence (X_ARM) as an indicator of magnetite nanoparticles. We also examined how exposure to PM oxidative capacity metrics (ROS/OP) varied by socioeconomic status within each city. In Montreal, areas with higher material deprivation, indicating lower area-level average household income and employment, were exposed to PM_2.5 characterized by higher ROS and OP. This relationship was not observed in Toronto. The developed models will be used in epidemiologic studies to assess the health effects of exposure to PM_2.5 and iron-rich magnetic nanoparticles in Toronto and Montreal.

Sources of cellular oxidative potential of water-soluble fine ambient particulate matter in the Midwestern United States

We investigated the spatiotemporal distribution and sources of cellular oxidative potential (OP) in the Midwest US. Weekly samples were collected from three urban [Chicago (IL), Indianapolis (IN), and St. Louis (MO)], one rural [Bondville (IL], and one roadside site [Champaign (IL)] for a year (May 2018 to May 2019), and analyzed for water-soluble cellular OP using a macrophage reactive oxygen species (ROS) assay. Chemical composition of the samples including several carbonaceous components, inorganic ions, and water-soluble elementals, were also analyzed. The emission sources contributing to water-soluble cellular OP and PM_2.5 mass were analyzed using positive matrix factorization. The secondary organic aerosols contributed substantially (≥54%) to PM_2.5 cellular OP at urban sites, while the roadside and rural OP were dominated by road dust (54%) and agricultural activities (62%), respectively. However, none of these sources contributed substantially to the PM_2.5 mass (≤21%). Other sources contributing significantly to the PM_2.5 mass, i.e., secondary sulfate and nitrate, biomass burning and coal combustion (14-26%) contributed minimally to the cellular OP (≤13%). Such divergent profiles of the emission sources contributing to cellular OP vs. PM_2.5 mass demonstrate the need of considering more health-relevant metrics such as OP in the design of air pollution control strategies.

Oxidative Potential Induced by Ambient Particulate Matters with Acellular Assays: A Review

Acellular assays of oxidative potential (OP) induced by ambient particulate matters (PMs) are of great significance in screening for toxicity in PMs. In this review, several typical OP measurement techniques, including the respiratory tract lining fluid assay (RTLF), ascorbate depletion assay (AA), dithiothreitol assay (DTT), chemiluminescent reductive acridinium triggering (CRAT), dichlorofluorescin assay (DCFH) and electron paramagnetic/spin resonance assay (EPR/ESR) are discussed and their sensitivity to different PMs species composition, PMs size distribution and seasonality is compared. By comparison, the DTT assay tends to be the preferred method providing a more comprehensive measurement with transition metals and quinones accumulated in the fine PMs fraction. Specific transition metals (i.e., Mn, Cu, Fe) and quinones are found to contribute OPDTT directly whereas the redox properties of PMs species may be changed by the interactions between themselves. The selection of the appropriate OP measurement methods and the accurate analysis of the relationship between the methods and PM components is conducive to epidemiological researches which are related with oxidative stress induced by PMs exposure.

Ambient particulate matter oxidative potential: Chemical determinants, associated health effects, and strategies for risk management

Exposure to ambient air pollution has an adverse influence on human health. There is increasing evidence that oxidative potential (OP), the capacity of airborne pollutants to oxidize target molecules by generating redox oxidizing species, is a plausible metric for particulate matter (PM) toxicity. Here we describe the commonly used acellular techniques for measuring OP (respiratory tract lining fluid, dithiothreitol, ascorbic acid, and electron paramagnetic resonance assays) and review the PM chemical constituents that have been identified to drive the OP response. We further perform a review of the epidemiologic literature to identify studies that reported an association between exposure to ambient PM and a health outcome in a human population, and in which exposure was measured by both PM mass concentration and OP. Laboratory studies have shown that specific redox-active metals and quinones are able to contribute OP directly. However, interactions among PM species may alter the redox properties of PM components. In ambient PM measurements, all OP assays were found to be correlated with metals (Fe, Cu) and organic species (photochemically aged organics). Across the epidemiological studies reviewed, associations between fine PM (PM_2.5) mass and cardio-respiratory outcomes were found to be stronger at elevated OP levels but findings varied across the different OP measurement techniques. Future work should aim to identify specific situations in which PM OP can improve air pollution exposure assessment and/or risk management. This may be particularly useful in countries with low PM_2.5 mass concentrations over broad spatial scales where such information may greatly improve the efficiency of risk management activities.

Metal(loid)s inhalation bioaccessibility and oxidative potential of particulate matter from chromated copper arsenate (CCA)-contaminated soils

Field-collected chromated copper arsenate (CCA)-contaminated soils and associated particulate matter (PM) were characterized for their total metal(loid)s content (As, Cr, Cu, Fe, Mn, Ni, Pb and Zn) and physicochemical properties. Copper, Ni, Pb and Zn fractionation (using sequential extraction) and inhalation bioaccessibility (using two lung fluids) of trace elements were assessed in PM samples. In Gamble's solution (GS), low average bioaccessibility (up to 12%) was observed for As, Cu, Mn, and Ni. A strong correlation (r = 0.92, p < 0.005, n = 9) between the soluble and exchangeable fraction (F1) and bioaccessibility in GS was observed for Cu. Inhalation bioaccessibility in artificial lysosomal fluid (ALF) was higher for Cu (avg. 78.5 ± 4.2%), Mn (avg. 56.8 ± 12.1%), Zn (avg. 54.8 ± 24.5%) and As (avg. 45.4 ± 18.8%). Strong correlations between inhalation bioaccessibility in ALF and the mobile (i.e. F1+F2) metal fraction were observed for all tested metals (i.e. (Cu (r = 0.95, p < 0.005), Ni (r = 0.79, p < 0.05), Pb (r = 0.92, p < 0.005) and Zn (r = 0.98, p < 0.005)), n = 9). The oxidative potential (OP) of PM was also assessed using an ascorbate (AA) depletion assay (OP_AA). Mobile Cu fractions were deemed to be the main factor influencing OP_AA ((F1 (r = 0.99, p < 0.005), F2 (r = 0.97, p < 0.005)), n = 9) in PM samples. A strong correlation (r = 0.94, p < 0.005, n = 10) was also observed between Cu bioaccessibility in GS and OP_AA.

Culturability, metabolic activity and composition of ambient bacterial aerosols in a surrogate lung fluid

Interactions of particulate matter (PM) and respiratory tract play a crucial role in PM-related respiratory diseases. The majority of the work focuses on the oxidative stress induced by reactions between PM-borne redox-active components and lung lining fluid (LLF). The effects of PM-borne biological components are largely unknown. Of all PM-borne biologicals, bacteria, as living microorganisms, are closely related with inflammatory immune responses. However, its inhalation risk is usually determined without considering the respiratory physiological conditions. In this study, a surrogate lung fluid (SLF) with four typical antioxidants was applied to characterize the ambient bacteria, including concentrations of total bacteria/viable bacteria/culturable bacteria, metabolic activity, bacteria-derived endotoxin, as well as the community structure. Comparing to those determined by SLF, we find that use of PBS leads to an underestimation of the bacterial culturability and metabolic activity. No effect was seen regarding the number of total bacteria and viable bacteria (with intact membrane). Population structure change was seen for bacteria cultured from SLF-collected samples, when compared to that from PBS. Spore-forming bacteria, e.g., genus Bacillus, were found to be easily recovered with SLF. This implies that use of PBS could underestimate the bacteria inhalation risk, especially those bacterial endospores. Our work highlights the necessity to consider the respiratory airway environment when evaluating microbial inhalation risk.

Health effects of particulate matter air pollution in underground railway systems - a critical review of the evidence

BACKGROUND

Exposure to ambient airborne particulate matter is a major risk factor for mortality and morbidity, associated with asthma, lung cancer, heart disease, myocardial infarction, and stroke, and more recently type 2 diabetes, dementia and loss of cognitive function. Less is understood about differential effects of particulate matter from different sources. Underground railways are used by millions of people on a daily basis in many cities. Poor air exchange with the outside environment means that underground railways often have an unusually high concentration of airborne particulate matter, while a high degree of railway-associated mechanical activity produces particulate matter which is physicochemically highly distinct from ambient particulate matter. The implications of this for the health of exposed commuters and employees is unclear.

MAIN BODY

A literature search found 27 publications directly assessing the potential health effects of underground particulate matter, including in vivo exposure studies, in vitro toxicology studies, and studies of particulate matter which might be similar to that found in underground railways. The methodology, findings, and conclusions of these studies were reviewed in depth, along with further publications directly relevant to the initial search results. In vitro studies suggest that underground particulate matter may be more toxic than exposure to ambient/urban particulate matter, especially in terms of endpoints related to reactive oxygen species generation and oxidative stress. This appears to be predominantly a result of the metal-rich nature of underground particulate matter, which is suggestive of increased health risks. However, while there are measureable effects on a variety of endpoints following exposure in vivo, there is a lack of evidence for these effects being clinically significant as may be implied by the in vitro evidence.

CONCLUSION

There is little direct evidence that underground railway particulate matter exposure is more harmful than ambient particulate matter exposure. This may be due to disparities between in vivo exposures and in vitro models, and differences in exposure doses, as well as statistical under powering of in vivo studies of chronic exposure. Future research should focus on outcomes of chronic in vivo exposure, as well as further work to understand mechanisms and potential biomarkers of exposure.

Oxidative potential (OP) and mineralogy of iron ore particulate matter at the Gol-E-Gohar Mining and Industrial Facility (Iran)

Concentrations of total suspended particulate matter, particulate matter with aerodynamic diameter <2.5 μm (PM_2.5), particulate matter <10 μm (PM₁₀), and fallout dust were measured at the Iranian Gol-E-Gohar Mining and Industrial Facility. Samples were characterized in terms of mineralogy, morphology, and oxidative potential. Results show that indoor samples exceeded the 24-h PM_2.5 and PM₁₀ mass concentration limits (35 and 150 µg m^-3, respectively) set by the US National Ambient Air Quality Standards. Calcite, magnetite, tremolite, pyrite, talc, and clay minerals such as kaolinite, vermiculite, and illite are the major phases of the iron ore PM. Accessory minerals are quartz, dolomite, hematite, actinolite, biotite, albite, nimite, laumontite, diopside, and muscovite. The scanning electron microscope structure of fibrous-elongated minerals revealed individual fibers in the range of 1.5 nm to 71.65 µm in length and 0.2 nm to 3.7 µm in diameter. The presence of minerals related to respiratory diseases, such as talc, crystalline silica, and needle-shaped minerals like amphibole asbestos (tremolite and actinolite), strongly suggests the need for detailed health-based studies in the region. The particulate samples show low to medium oxidative potential per unit of mass, in relation to an urban road side control, being more reactive with ascorbate than with glutathione or urate. However, the PM oxidative potential per volume of air is exceptionally high, confirming that the workers are exposed to a considerable oxidative environment. PM released by iron ore mining and processing activities should be considered a potential health risk to the mine workers and nearby employees, and strategies to combat the issue are suggested.

Expert consensus on an in vitro approach to assess pulmonary fibrogenic potential of aerosolized nanomaterials

The increasing use of multi-walled carbon nanotubes (MWCNTs) in consumer products and their potential to induce adverse lung effects following inhalation has lead to much interest in better understanding the hazard associated with these nanomaterials (NMs). While the current regulatory requirement for substances of concern, such as MWCNTs, in many jurisdictions is a 90-day rodent inhalation test, the monetary, ethical, and scientific concerns associated with this test led an international expert group to convene in Washington, DC, USA, to discuss alternative approaches to evaluate the inhalation toxicity of MWCNTs. Pulmonary fibrosis was identified as a key adverse outcome linked to MWCNT exposure, and recommendations were made on the design of an in vitro assay that is predictive of the fibrotic potential of MWCNTs. While fibrosis takes weeks or months to develop in vivo, an in vitro test system may more rapidly predict fibrogenic potential by monitoring pro-fibrotic mediators (e.g., cytokines and growth factors). Therefore, the workshop discussions focused on the necessary specifications related to the development and evaluation of such an in vitro system. Recommendations were made for designing a system using lung-relevant cells co-cultured at the air–liquid interface to assess the pro-fibrogenic potential of aerosolized MWCNTs, while considering human-relevant dosimetry and NM life cycle transformations. The workshop discussions provided the fundamental design components of an air–liquid interface in vitro test system that will be subsequently expanded to the development of an alternative testing strategy to predict pulmonary toxicity and to generate data that will enable effective risk assessment of NMs.

A Novel High-Throughput Approach to Measure Hydroxyl Radicals Induced by Airborne Particulate Matter

Oxidative stress is one of the key mechanisms linking ambient particulate matter (PM) exposure with various adverse health effects. The oxidative potential of PM has been used to characterize the ability of PM induced oxidative stress. Hydroxyl radical (•OH) is the most destructive radical produced by PM. However, there is currently no high-throughput approach which can rapidly measure PM-induced •OH for a large number of samples with an automated system. This study evaluated four existing molecular probes (disodium terephthalate, 3′-p-(aminophenyl)fluorescein, coumarin-3-carboxylic acid, and sodium benzoate) for their applicability to measure •OH induced by PM in a high-throughput cell-free system using fluorescence techniques, based on both our experiments and on an assessment of the physicochemical properties of the probes reported in the literature. Disodium terephthalate (TPT) was the most applicable molecular probe to measure •OH induced by PM, due to its high solubility, high stability of the corresponding fluorescent product (i.e., 2-hydroxyterephthalic acid), high yield compared with the other molecular probes, and stable fluorescence intensity in a wide range of pH environments. TPT was applied in a high-throughput format to measure PM (NIST 1648a)-induced •OH, in phosphate buffered saline. The formed fluorescent product was measured at designated time points up to 2 h. The fluorescent product of TPT had a detection limit of 17.59 nM. The soluble fraction of PM contributed approximately 76.9% of the •OH induced by total PM, and the soluble metal ions of PM contributed 57.4% of the overall •OH formation. This study provides a promising cost-effective high-throughput method to measure •OH induced by PM on a routine basis.

Oxidation of c60 aerosols by atmospherically relevant levels of o3

Atmospheric processing of carbonaceous nanoparticles (CNPs) may play an important role in determining their fate and environmental impacts. This work investigates the reaction between aerosolized C60 and atmospherically relevant mixing ratios of O3 at differing levels of humidity. Results indicate that C60 is oxidized by O3 and forms a variety of oxygen-containing functional groups on the aerosol surface, including C60O, C60O2, and C60O3. The pseudo-first-order reaction rate between C60 and O3 ranges from 9 × 10(-6) to 2 × 10(-5) s(-1). The reaction is likely to be limited to the aerosol surface. Exposure to O3 increases the oxidative stress exerted by the C60 aerosols as measured by the dichlorofluorescein acellular assay but not by the uric acid, ascorbic acid, glutathione, or dithiothreitol assays. The initial prevalence of C60O and C60O2 as intermediate products is enhanced at higher humidity, as is the surface oxygen content of the aerosols. These results show that C60 can be oxidized when exposed to O3 under ambient conditions, such as those found in environmental, laboratory, and industrial settings.

Factors required for activation of urease as a virulence determinant in Cryptococcus neoformans

Urease in Cryptococcus neoformans plays an important role in fungal dissemination to the brain and causing meningoencephalitis. Although urea is not required for synthesis of apourease encoded by URE1, the available nitrogen source affected the expression of URE1 as well as the level of the enzyme activity. Activation of the apoenzyme requires three accessory proteins, Ure4, Ure6, and Ure7, which are homologs of the bacterial urease accessory proteins UreD, UreF, and UreG, respectively. A yeast two-hybrid assay showed positive interaction of Ure1 with the three accessory proteins encoded by URE4, URE6, and URE7. Metalloproteomic analysis of cryptococcal lysates using inductively coupled plasma mass spectrometry (ICP-MS) and a biochemical assay of urease activity showed that, as in many other organisms, urease is a metallocentric enzyme that requires nickel transported by Nic1 for its catalytic activity. The Ure7 accessory protein (bacterial UreG homolog) binds nickel likely via its conserved histidine-rich domain and appears to be responsible for the incorporation of Ni²⁺ into the apourease. Although the cryptococcal genome lacks the bacterial UreE homolog, Ure7 appears to combine the functions of bacterial UreE and UreG, thus making this pathogen more similar to that seen with the plant system. Brain invasion by the ure1, ure7, and nic1 mutant strains that lack urease activity was significantly less effective in a mouse model. This indicated that an activated urease and not the Ure1 protein was responsible for enhancement of brain invasion and that the factors required for urease activation in C. neoformans resemble those of plants more than those of bacteria.

Cryptococcus neoformans is the major fungal agent of meningoencephalitis in humans. Although urease is an important factor for cryptococcal brain invasion, the enzyme activation system has not been studied. We show that urease is a nickel-requiring enzyme whose activity level is influenced by the type of available nitrogen source. C. neoformans contains all the bacterial urease accessory protein homologs and nickel transporters except UreE, a nickel chaperone. Cryptococcal Ure7 (a homolog of UreG) apparently functions as both the bacterial UreG and UreE in activating the Ure1 apoenzyme. The cryptococcal urease accessory proteins Ure4, Ure6, and Ure7 interacted with Ure1 in a yeast two-hybrid assay, and deletion of any one of these not only inactivated the enzyme but also reduced the efficacy of brain invasion. This is the first study showing a holistic picture of urease in fungi, clarifying that urease activity, and not Ure1 protein, contributes to pathogenesis in C. neoformans

Small things make a big difference: particulate matter and exercise

The increased risk of morbidity and mortality among adults and children with pre-existing cardiovascular or respiratory illness from emission-derived particulate matter (PM) is well documented. However, the detrimental effects of PM inhalation on the exercising, healthy population is still in question. This review will focus on the acute and chronic responses to PM inhalation during exercise and how PM exposure influences exercise performance. The smaller ultrafine PM (<0.01 μm aerodynamic diameter) appears to have the most severe health consequences compared with the larger coarse PM (2.5 < PM <10 μm aerodynamic diameter). While the response to PM inhalation may affect those with a pre-existing condition, the healthy population is not immune to the effects of PM inhalation, especially during exercise. This population, including the competitive athlete, is susceptible to pulmonary inflammation, decreased lung function (both acute and chronic in nature), the increased risk of asthma, vascular endothelial dysfunction, mild elevations in pulmonary artery pressure and diminished exercise performance. PM exposure is usually associated with vehicular traffic, but other sources of PM, including small engines from lawn and garden equipment, cigarette smoke, wood smoke and cooking, may also impair health and performance. The physiological effects of PM are dependent on the source of PM, various environmental factors, physical attributes and nature of exercise. There are a number of measures an athlete can take to reduce exposure to PM, as well as the deleterious effects that result from the inevitable exposure to PM. Considering the acute and chronic physiological responses to PM inhalation, individuals living and exercising in urban areas in close proximity to major roadways should consider ambient air pollution levels (in particular, PM and ozone) prior to engaging in vigorous exercise, and those exposed to PM through other sources may need to make lifestyle alterations to avoid the deleterious effects of PM inhalation. Although it is clear that PM exposure is detrimental to healthy individuals engaging in exercise, further research is necessary to better understand the role of PM on athlete health and performance, as well as measures that can attenuate the harmful effects of PM.

Contribution of water-soluble and insoluble components and their hydrophobic/hydrophilic subfractions to the reactive oxygen species-generating potential of fine ambient aerosols

Relative contributions of water- and methanol-soluble compounds and their hydrophobic/hydrophilic subfractions to the ROS (reactive oxygen species)-generating potential of ambient fine aerosols (D(p) < 2.5 μm) are assessed. ROS-generating (or oxidative) potential of the particulate matter (PM) was measured by the dithiothreitol (DTT) assay. Particles were collected on quartz filters (N = 8) at an urban site near central Atlanta during January-February 2012 using a PM(2.5) high-volume sampler. Filter punches were extracted separately in both water and methanol. Hydrophobic and hydrophilic fractions were then subsequently segregated via a C-18 solid phase extraction column. The DTT assay response was significantly higher for the methanol extract, and for both extracts a substantial fraction of PM oxidative potential was associated with the hydrophobic compounds as evident from a substantial attenuation in DTT response after passing PM extracts through the C-18 column (64% for water and 83% for methanol extract; both median values). The DTT activities of water and methanol extracts were correlated with the water-soluble (R = 0.86) and water-insoluble organic carbon (R = 0.94) contents of the PM, respectively. Brown carbon (BrC), which predominantly represents the hydrophobic organic fraction (referred to as humic-like substances, HULIS), was also correlated with DTT activity in both the water (R = 0.78) and methanol extracts (R = 0.83). Oxidative potential was not correlated with any metals measured in the extracts. These findings suggest that the hydrophobic components of both water-soluble and insoluble organic aerosols substantially contribute to the oxidative properties of ambient PM. Further investigation of these hydrophobic organic compounds could help identify sources of a significant fraction of ambient aerosol toxicity.

Multiple aspects of the interaction of biomacromolecules with inorganic surfaces

The understanding of the mechanisms involved in the interaction of biological systems with inorganic materials is of interest in both fundamental and applied disciplines. The adsorption of proteins modulates the formation of biofilms onto surfaces, a process important in infections associated to medical implants, in dental caries, in environmental technologies. The interaction with biomacromolecules is crucial to determine the beneficial/adverse response of cells to foreign inorganic materials as implants, engineered or accidentally produced inorganic nanoparticles. A detailed knowledge of the surface/biological fluids interface processes is needed for the design of new biocompatible materials. Researchers involved in the different disciplines face up with similar difficulties in describing and predicting phenomena occurring at the interface between solid phases and biological fluids. This review represents an attempt to integrate the knowledge from different research areas by focussing on the search for determinants driving the interaction of inorganic surfaces with biological matter.

Increased oxidative burden associated with traffic component of ambient particulate matter at roadside and urban background schools sites in London

As the incidence of respiratory and allergic symptoms has been reported to be increased in children attending schools in close proximity to busy roads, it was hypothesised that PM from roadside schools would display enhanced oxidative potential (OP). Two consecutive one-week air quality monitoring campaigns were conducted at seven school sampling sites, reflecting roadside and urban background in London. Chemical characteristics of size fractionated particulate matter (PM) samples were related to the capacity to drive biological oxidation reactions in a synthetic respiratory tract lining fluid. Contrary to hypothesised contrasts in particulate OP between school site types, no robust size-fractionated differences in OP were identified due high temporal variability in concentrations of PM components over the one-week sampling campaigns. For OP assessed both by ascorbate (OP(AA) m(-3)) and glutathione (OP(GSH) m(-3)) depletion, the highest OP per cubic metre of air was in the largest size fraction, PM(1.9-10.2). However, when expressed per unit mass of particles OP(AA) µg(-1) showed no significant dependence upon particle size, while OP(GSH) µg(-1) had a tendency to increase with increasing particle size, paralleling increased concentrations of Fe, Ba and Cu. The two OP metrics were not significantly correlated with one another, suggesting that the glutathione and ascorbate depletion assays respond to different components of the particles. Ascorbate depletion per unit mass did not show the same dependence as for GSH and it is possible that other trace metals (Zn, Ni, V) or organic components which are enriched in the finer particle fractions, or the greater surface area of smaller particles, counter-balance the redox activity of Fe, Ba and Cu in the coarse particles. Further work with longer-term sampling and a larger suite of analytes is advised in order to better elucidate the determinants of oxidative potential, and to fuller explore the contrasts between site types.

Particulate oxidative burden associated with firework activity

Firework events are capable of inducing particulate matter (PM) episodes that lead to exceedances of regulatory limit values. As short-term peaks in ambient PM concentration have been associated with negative impacts on respiratory and cardiovascular health, we performed a detailed study of the consequences of firework events in London on ambient air quality and PM composition. These changes were further related to the oxidative activity of daily PM samples by assessing their capacity to drive the oxidation of physiologically important lung antioxidants including ascorbate, glutathione and urate (oxidative potential, OP). Twenty-four hour ambient PM samples were collected at the Marylebone Road sampling site in Central London over a three week period, including two major festivals celebrated with pyrotechnic events: Guy Fawkes Night and Diwali. Pyrotechnic combustion events were characterized by increased gas phase pollutants levels (NO(x) and SO(2)), elevated PM mass concentrations, and trace metal concentrations (specifically Sr, Mg, K, Ba, and Pb). Relationships between NO(x), benzene, and PM(10) were used to apportion firework and traffic source fractions. A positive significant relationship was found between PM oxidative burden and individual trace metals associated with each of these apportioned source fractions. The level of exposure to each source fraction was significantly associated with the total OP. The firework contribution to PM total OP, on a unit mass basis, was greater than that associated with traffic sources: a 1 μg elevation in firework and traffic PM fraction concentration was associated with a 6.5 ± 1.5 OP(T) μg(-1) and 5.2 ± 1.4 OP(T) μg(-1) increase, respectively. In the case of glutathione depletion, firework particulate OP (3.5 ± 0.8 OP(GSH) μg(-1)) considerably exceeded that due to traffic particles (2.2 ± 0.8 OP(GSH) μg(-1)). Therefore, in light of the elevated PM concentrations caused by firework activity and the increased oxidative activity of this PM source, there is value in examining if firework derived PM is related to acute respiratory outcomes.

Pulmonary antioxidants exert differential protective effects against urban and industrial particulate matter

This investigation focuses on the application of an in vitro assay in elucidating the role of lung lining fluid antioxidants in the protection against inhaled particles, and to compare the toxicities of different airborne particulate matter (PM), PM10, collections from South Wales, UK. PM collections from both urban and industrial sites caused 50% oxidative degradation of DNA in vitro at concentrations as low as 12.9 +/- 2.1 microg ml(-1) and 4.9 0.9 mg ml-1 respectively. The primary source of this bioreactivity was found to be the soluble fraction of both particle collections. The coarser PM(10-2.5) fraction also showed greater oxidative bioreactivity than the PM(2.5-0.1) in both cases. When repeated in the presence of a low molecular weight fraction of fresh pulmonary lavage fluid, as well as in artificial lung lining fluid (200 microM urate, glutathione and ascorbate), the DNA damage was significantly reduced in all cases (P < 0.05). The antioxidants exerted a greater effect on the industrial samples than on the urban samples, and on the PM(10-2.5) fractions than on the PM(2.5-0.1) fractions, supporting the previous findings that respirable PM and urban samples contain fewer free radical sources than inhalable PM and industrial samples.